Revert "Merge pull request #294 from cmdr2/main"

This reverts commit 1e3b4f9969, reversing
changes made to e0c0935d3a.

.gitattributes

@@ -0,0 +1 @@
+* text=auto eol=lf

.gitignore

@@ -2,4 +2,10 @@ __pycache__
 installer
 installer.tar
 dist
+
+# built code for the front end
+!/ui/frontend/dist
+ui/frontend/.idea/*
+ui/frontend/build_src/.idea/*
+
 .idea/*

3rd-PARTY-LICENSES

@@ -1,27 +0,0 @@
-jquery-confirm
-==============
-https://craftpip.github.io/jquery-confirm/
-
-jquery-confirm is licensed under the MIT license:
-
-  The MIT License (MIT)
-
-  Copyright (c) 2019 Boniface Pereira
-
-  Permission is hereby granted, free of charge, to any person obtaining a copy
-  of this software and associated documentation files (the "Software"), to deal
-  in the Software without restriction, including without limitation the rights
-  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-  copies of the Software, and to permit persons to whom the Software is
-  furnished to do so, subject to the following conditions:
-
-  The above copyright notice and this permission notice shall be included in all
-  copies or substantial portions of the Software.
-
-  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-  SOFTWARE.

CHANGES.md

@@ -1,66 +0,0 @@
-# What's new?
-
-## v2.4
-### Major Changes
-- **Allow reordering the task queue** (by dragging and dropping tasks). Thanks @madrang
-- **Automatic scanning for malicious model files** - using `picklescan`, and support for `safetensor` model format. Thanks @JeLuf
-- **Image Editor** - for drawing simple images for guiding the AI. Thanks @mdiller
-- **Use pre-trained hypernetworks** - for improving the quality of images. Thanks @C0bra5
-- **Support for custom VAE models**. You can place your VAE files in the `models/vae` folder, and refresh the browser page to use them. More info: https://github.com/cmdr2/stable-diffusion-ui/wiki/VAE-Variational-Auto-Encoder
-- **Experimental support for multiple GPUs!** It should work automatically. Just open one browser tab per GPU, and spread your tasks across your GPUs. For e.g. open our UI in two browser tabs if you have two GPUs. You can customize which GPUs it should use in the "Settings" tab, otherwise let it automatically pick the best GPUs. Thanks @madrang . More info: https://github.com/cmdr2/stable-diffusion-ui/wiki/Run-on-Multiple-GPUs
-- **Cleaner UI design** - Show settings and help in new tabs, instead of dropdown popups (which were buggy). Thanks @mdiller
-- **Progress bar.** Thanks @mdiller
-- **Custom Image Modifiers** - You can now save your custom image modifiers! Your saved modifiers can include special characters like `{}, (), [], |`
-- Drag and Drop **text files generated from previously saved images**, and copy settings to clipboard. Thanks @madrang
-- Paste settings from clipboard. Thanks @JeLuf
-- Bug fixes to reduce the chances of tasks crashing during long multi-hour runs (chrome can put long-running background tabs to sleep). Thanks @JeLuf and @madrang
-- **Improved documentation.** Thanks @JeLuf and @jsuelwald
-- Improved the codebase for dealing with system settings and UI settings. Thanks @mdiller
-- Help instructions next to some setttings, and in the tab
-- Show system info in the settings tab
-- Keyboard shortcut: Ctrl+Enter to start a task
-- Configuration to prevent the browser from opening on startup
-- Lots of minor bug fixes
-- A `What's New?` tab in the UI
-- Ask for a confimation before clearing the results pane or stopping a render task. The dialog can be skipped by holding down the shift key while clicking on the button.
-- Show the network addresses of the server in the systems setting dialog
-- Support loading models in the safetensor format, for improved safety
-
-### Detailed changelog
-* 2.4.21 - 23 Dec 2022 - Speed up image creation, by removing a delay (regression) of 4-5 seconds between clicking the `Make Image` button and calling the server.
-* 2.4.20 - 22 Dec 2022 - `Pause All` button to pause all the pending tasks. Thanks @JeLuf
-* 2.4.20 - 22 Dec 2022 - `Undo`/`Redo` buttons in the image editor. Thanks @JeLuf
-* 2.4.20 - 22 Dec 2022 - Drag handle to reorder the tasks. This fixed a bug where the metadata was no longer selectable (for copying). Thanks @JeLuf
-* 2.4.19 - 17 Dec 2022 - Add Undo/Redo buttons in the Image Editor. Thanks @JeLuf
-* 2.4.19 - 10 Dec 2022 - Show init img in task list
-* 2.4.19 - 7 Dec 2022 - Use pre-trained hypernetworks while generating images. Thanks @C0bra5
-* 2.4.19 - 6 Dec 2022 - Allow processing new tasks first. Thanks @madrang
-* 2.4.19 - 6 Dec 2022 - Allow reordering the task queue (by dragging tasks). Thanks @madrang
-* 2.4.19 - 6 Dec 2022 - Re-organize the code, to make it easier to write user plugins. Thanks @madrang
-* 2.4.18 - 5 Dec 2022 - Make JPEG Output quality user controllable. Thanks @JeLuf
-* 2.4.18 - 5 Dec 2022 - Support loading models in the safetensor format, for improved safety. Thanks @JeLuf
-* 2.4.18 - 1 Dec 2022 - Image Editor, for drawing simple images for guiding the AI. Thanks @mdiller
-* 2.4.18 - 1 Dec 2022 - Disable an image modifier temporarily by right-clicking it. Thanks @patriceac
-* 2.4.17 - 30 Nov 2022 - Scroll to generated image. Thanks @patriceac
-* 2.4.17 - 30 Nov 2022 - Show the network addresses of the server in the systems setting dialog. Thanks @JeLuf
-* 2.4.17 - 30 Nov 2022 - Fix a bug where GFPGAN wouldn't work properly when multiple GPUs tried to run it at the same time. Thanks @madrang
-* 2.4.17 - 30 Nov 2022 - Confirm before stopping or clearing all the tasks. Thanks @JeLuf
-* 2.4.16 - 29 Nov 2022 - Bug fixes for SD 2.0 - remove the need for patching, default to SD 1.4 model if trying to load an SD2 model in SD1.4.
-* 2.4.15 - 25 Nov 2022 - Experimental support for SD 2.0. Uses lots of memory, not optimized, probably GPU-only.
-* 2.4.14 - 22 Nov 2022 - Change the backend to a custom fork of Stable Diffusion
-* 2.4.13 - 21 Nov 2022 - Change the modifier weight via mouse wheel, drag to reorder selected modifiers, and some more modifier-related fixes. Thanks @patriceac
-* 2.4.12 - 21 Nov 2022 - Another fix for improving how long images take to generate. Reduces the time taken for an enqueued task to start processing.
-* 2.4.11 - 21 Nov 2022 - Installer improvements: avoid crashing if the username contains a space or special characters, allow moving/renaming the folder after installation on Windows, whitespace fix on git apply
-* 2.4.11 - 21 Nov 2022 - Validate inputs before submitting the Image request
-* 2.4.11 - 19 Nov 2022 - New system settings to manage the network config (port number and whether to only listen on localhost)
-* 2.4.11 - 19 Nov 2022 - Address a regression in how long images take to generate. Use the previous code for moving a model to CPU. This improves things by a second or two per image, but we still have a regression (investigating).
-* 2.4.10 - 18 Nov 2022 - Textarea for negative prompts. Thanks @JeLuf
-* 2.4.10 - 18 Nov 2022 - Improved design for Settings, and rounded toggle buttons instead of checkboxes for a more modern look. Thanks @mdiller
-* 2.4.9 - 18 Nov 2022 - Add Picklescan - a scanner for malicious model files. If it finds a malicious file, it will halt the web application and alert the user. Thanks @JeLuf
-* 2.4.8 - 18 Nov 2022 - A `Use these settings` button to use the settings from a previously generated image task. Thanks @patriceac
-* 2.4.7 - 18 Nov 2022 - Don't crash if a VAE file fails to load
-* 2.4.7 - 17 Nov 2022 - Fix a bug where Face Correction (GFPGAN) would fail on cuda:N (i.e. GPUs other than cuda:0), as well as fail on CPU if the system had an incompatible GPU.
-* 2.4.6 - 16 Nov 2022 - Fix a regression in VRAM usage during startup, which caused 'Out of Memory' errors when starting on GPUs with 4gb (or less) VRAM
-* 2.4.5 - 16 Nov 2022 - Add checkbox for "Open browser on startup".
-* 2.4.5 - 16 Nov 2022 - Add a directory for core plugins that ship with Stable Diffusion UI by default.
-* 2.4.5 - 16 Nov 2022 - Add a "What's New?" tab as a core plugin, which fetches the contents of CHANGES.md from the app's release branch.

CONTRIBUTING.md

@@ -6,18 +6,19 @@ Thanks
 
 # For developers:
 
-If you would like to contribute to this project, there is a discord for discussion:
+If you would like to contribute to this project, there is a discord for dicussion:
 [![Discord Server](https://badgen.net/badge/icon/discord?icon=discord&label)](https://discord.com/invite/u9yhsFmEkB)
 
 ## Development environment for UI (frontend and server) changes
 This is in-flux, but one way to get a development environment running for editing the UI of this project is:
 (swap `.sh` or `.bat` in instructions depending on your environment, and be sure to adjust any paths to match where you're working)
 
-1) Install the project to a new location using the [usual installation process](https://github.com/cmdr2/stable-diffusion-ui#installation), e.g. to `/projects/stable-diffusion-ui-archive`
+1) `git clone` the repository, e.g. to `/projects/stable-diffusion-ui-repo`
-2) Start the newly installed project, and check that you can view and generate images on `localhost:9000`
+2) Download the pre-built end user archive from the link on github, and extract it, e.g. to `/projects/stable-diffusion-ui-archive`
-3) Next, please clone the project repository using `git clone` (e.g. to `/projects/stable-diffusion-ui-repo`)
+3) `cd /projects/stable-diffusion-ui-archive` and run the script to set up and start the project, e.g. `start.sh`
-4) Close the server (started in step 2), and edit `/projects/stable-diffusion-ui-archive/scripts/on_env_start.sh` (or `on_env_start.bat`)
+4) Check you can view and generate images on `localhost:9000`
-5) Comment out the lines near the bottom that copies the `files/ui` folder, e.g:
+5) Close the server, and edit `/projects/stable-diffusion-ui-archive/scripts/on_env_start.sh`
+6) Comment out the lines near the bottom that copies the `files/ui` folder, e.g:
   
   for `.sh`
 ```
@@ -32,20 +33,23 @@ REM @xcopy sd-ui-files\ui ui /s /i /Y
 REM @copy sd-ui-files\scripts\on_sd_start.bat scripts\ /Y
 REM @copy "sd-ui-files\scripts\Start Stable Diffusion UI.cmd" . /Y
 ``` 
-6) Next, comment out the line at the top of `/projects/stable-diffusion-ui-archive/scripts/on_sd_start.sh` (or `on_sd_start.bat`) that copies `on_env_start`. For e.g. `@rem @copy sd-ui-files\scripts\on_env_start.bat scripts\ /Y`
+7) Comment out the line at the top of `/projects/stable-diffusion-ui-archive/scripts/on_sd_start.sh` that copies `on_env_start`. For e.g. `@copy sd-ui-files\scripts\on_env_start.bat scripts\ /Y`
 8) Delete the current `ui` folder at `/projects/stable-diffusion-ui-archive/ui`
 9) Now make a symlink between the repository clone (where you will be making changes) and this archive (where you will be running stable diffusion):
 `ln -s /projects/stable-diffusion-ui-repo/ui /projects/stable-diffusion-ui-archive/ui`
 or for Windows
-`mklink /J \projects\stable-diffusion-ui-archive\ui \projects\stable-diffusion-ui-repo\ui` (link name first, source repo dir second)
+`mklink /D \projects\stable-diffusion-ui-archive\ui \projects\stable-diffusion-ui-repo\ui` (link name first, source repo dir second)
-9) Run the project again (like in step 2) and ensure you can still use the UI.
+9) Run the archive again `start.sh` and ensure you can still use the UI.
 10) Congrats, now any changes you make in your repo `ui` folder are linked to this running archive of the app and can be previewed in the browser.
-11) Please update CHANGES.md in your pull requests.
 
 Check the `ui/frontend/build/README.md` for instructions on running and building the React code.
 
 ## Development environment for Installer changes
 Build the Windows installer using Windows, and the Linux installer using Linux. Don't mix the two, and don't use WSL. An Ubuntu VM is fine for building the Linux installer on a Windows host.
 
-1. Run `build.bat` or `./build.sh` depending on whether you're in Windows or Linux.
+1. Install Miniconda 3 or Anaconda.
-2. Make a new GitHub release and upload the Windows and Linux installer builds created inside the `dist` folder.
+2. Install `conda install -c conda-forge -y conda-pack`
+3. Open the Anaconda Prompt. Do not use WSL if you're building for Windows.
+4. Run `build.bat` or `./build.sh` depending on whether you're in Windows or Linux.
+5. Compress the `stable-diffusion-ui` folder created inside the `dist` folder. Make a `zip` for Windows, and `tar.xz` for Linux (smaller files, and Linux users already have tar).
+6. Make a new GitHub release and upload the Windows and Linux installer builds.

NSIS/README.md

@@ -1 +0,0 @@
-Scripts to be used with the Nullsoft Scriptable Installation System

NSIS/sdui.nsi

@@ -1,265 +0,0 @@
-; Script generated by the HM NIS Edit Script Wizard.
-
-Target x86-unicode
-Unicode True
-!AddPluginDir /x86-unicode "."
-; HM NIS Edit Wizard helper defines
-!define PRODUCT_NAME "Stable Diffusion UI"
-!define PRODUCT_VERSION "Installer 2.35"
-!define PRODUCT_PUBLISHER "cmdr2 and contributors"
-!define PRODUCT_WEB_SITE "https://stable-diffusion-ui.github.io"
-!define PRODUCT_DIR_REGKEY "Software\Microsoft\Cmdr2\App Paths\installer.exe"
-
-; MUI 1.67 compatible ------
-!include "MUI.nsh"
-!include "LogicLib.nsh"
-!include "nsDialogs.nsh"
-
-Var Dialog
-Var Label
-Var Button
-
-Var InstDirLen
-Var LongPathsEnabled
-Var AccountType
-
-;---------------------------------------------------------------------------------------------------------
-; This function returns the number of spaces in a string.
-; The string is passed on the stack (using Push $STRING)
-; The result is also returned on the stack and can be consumed with Pop $var
-; https://nsis.sourceforge.io/Check_for_spaces_in_a_directory_path
-Function CheckForSpaces
-  Exch $R0
-  Push $R1
-  Push $R2
-  Push $R3
-  StrCpy $R1 -1
-  StrCpy $R3 $R0
-  StrCpy $R0 0
-  loop:
-    StrCpy $R2 $R3 1 $R1
-    IntOp $R1 $R1 - 1
-    StrCmp $R2 "" done
-    StrCmp $R2 " " 0 loop
-    IntOp $R0 $R0 + 1
-  Goto loop
-  done:
-  Pop $R3
-  Pop $R2
-  Pop $R1
-  Exch $R0
-FunctionEnd
-
-;---------------------------------------------------------------------------------------------------------
-; The function DirectoryLeave is called after the user chose the installation directory.
-; If it calls "abort", the user is sent back to choose a different directory.
-Function DirectoryLeave
-   ; check whether the installation directory path is longer than 30 characters.
-   ; If yes, we suggest to the user to enable long filename support
-   ;----------------------------------------------------------------------------
-   StrLen $InstDirLen "$INSTDIR"
-
-   ; Check whether the registry key that allows for >260 characters in a path name is set
-   ReadRegStr $LongPathsEnabled HKLM "SYSTEM\CurrentControlSet\Control\FileSystem" "LongPathsEnabled"
-
-   ${If} $InstDirLen > 30
-   ${AndIf} $LongPathsEnabled == "0"
-      ; Check whether we're in the Admin group
-      UserInfo::GetAccountType
-      Pop $AccountType
-
-      ${If} $AccountType == "Admin"
-      ${AndIf} ${Cmd} `MessageBox MB_YESNO|MB_ICONQUESTION 'The path name is too long. $\n$\nYou can either enable long file name support in Windows,$\nor you can go back and choose a different path.$\n$\nFor details see: shorturl.at/auBD1$\n$\nEnable long path name support in Windows?' IDYES`
-          ; Enable long path names
-          WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Control\FileSystem" "LongPathsEnabled" 1
-      ${Else}
-          MessageBox MB_OK|MB_ICONEXCLAMATION "Installation path name too long. The installation path must not have more than 30 characters."
-          abort
-      ${EndIf}
-   ${EndIf}
-   
-   ; Check for spaces in the installation directory path.
-   ; ----------------------------------------------------
-
-   ; $R0 = CheckForSpaces( $INSTDIR )
-   Push $INSTDIR # Input string (install path).
-     Call CheckForSpaces
-   Pop $R0 # The function returns the number of spaces found in the input string.
-
-   ; Check if any spaces exist in $INSTDIR.
-   ${If} $R0 != 0
-     ; Plural if more than 1 space in $INSTDIR.
-     ; If $R0 == 1: $R1 = ""; else: $R1 = "s"
-     StrCmp $R0 1 0 +3
-       StrCpy $R1 ""
-     Goto +2
-       StrCpy $R1 "s"
-
-     ; Show message box then take the user back to the Directory page.
-     MessageBox MB_OK|MB_ICONEXCLAMATION "Error: The Installaton directory \
-     has $R0 space character$R1.$\nPlease choose an installation directory without space characters."
-     Abort
-   ${EndIf}
-   
-   ; Check for NTFS filesystem. Installations on FAT fail.
-   ; -----------------------------------------------------
-   StrCpy $5 $INSTDIR 3
-   System::Call 'Kernel32::GetVolumeInformation(t "$5",t,i ${NSIS_MAX_STRLEN},*i,*i,*i,t.r1,i ${NSIS_MAX_STRLEN})i.r0'
-   ${If} $0 <> 0
-   ${AndIf} $1 == "NTFS"
-       MessageBox mb_ok "$5 has filesystem type '$1'.$\nOnly NTFS filesystems are supported.$\nPlease choose a different drive."
-       Abort
-   ${EndIf}
-
-FunctionEnd
-
-
-;---------------------------------------------------------------------------------------------------------
-; Open the MS download page in a browser and enable the [Next] button
-Function MSMediaFeaturepack
-    ExecShell "open" "https://www.microsoft.com/en-us/software-download/mediafeaturepack"
-
-    GetDlgItem $0 $HWNDPARENT 1
-    EnableWindow $0 1
-FunctionEnd
-
-;---------------------------------------------------------------------------------------------------------
-; Install the MS Media Feature Pack, if it is missing (e.g. on Windows 10 N)
-Function MediaPackDialog
-    !insertmacro MUI_HEADER_TEXT "Windows Media Feature Pack" "Required software module is missing"
-
-    ; Skip this dialog if mf.dll is installed
-    ${If} ${FileExists} "$WINDIR\system32\mf.dll"
-        Abort
-    ${EndIf}
-    
-    nsDialogs::Create 1018
-    Pop $Dialog
-
-    ${If} $Dialog == error
-	Abort
-    ${EndIf}
-
-    ${NSD_CreateLabel} 0 0 100% 48u "The Windows Media Feature Pack is missing on this computer. It is required for the Stable Diffusion UI.$\nYou can continue the installation after installing the Windows Media Feature Pack."
-    Pop $Label
- 	
-    ${NSD_CreateButton} 10% 49u 80% 12u "Download Meda Feature Pack from Microsoft"
-    Pop $Button
-
-    GetFunctionAddress $0 MSMediaFeaturePack
-    nsDialogs::OnClick $Button $0
-    GetDlgItem $0 $HWNDPARENT 1
-    EnableWindow $0 0
-    nsDialogs::Show
-FunctionEnd
-
-;---------------------------------------------------------------------------------------------------------
-; MUI Settings
-;---------------------------------------------------------------------------------------------------------
-!define MUI_ABORTWARNING
-!define MUI_ICON "sd.ico"
-
-!define MUI_WELCOMEFINISHPAGE_BITMAP "astro.bmp"
-
-; Welcome page
-!define MUI_WELCOMEPAGE_TEXT "This installer will guide you through the installation of Stable Diffusion UI.$\n$\n\
-Click Next to continue."
-!insertmacro MUI_PAGE_WELCOME
-Page custom MediaPackDialog
-
-; License page
-!insertmacro MUI_PAGE_LICENSE "..\LICENSE"
-!insertmacro MUI_PAGE_LICENSE "..\CreativeML Open RAIL-M License"
-; Directory page
-!define MUI_PAGE_CUSTOMFUNCTION_LEAVE "DirectoryLeave"
-!insertmacro MUI_PAGE_DIRECTORY
-
-; Instfiles page
-!insertmacro MUI_PAGE_INSTFILES 
-
-; Finish page
-!define MUI_FINISHPAGE_RUN "$INSTDIR\Start Stable Diffusion UI.cmd"
-!insertmacro MUI_PAGE_FINISH
-
-; Language files
-!insertmacro MUI_LANGUAGE "English"
-;---------------------------------------------------------------------------------------------------------
-; MUI end
-;---------------------------------------------------------------------------------------------------------
-
-Name "${PRODUCT_NAME} ${PRODUCT_VERSION}"
-OutFile "Install Stable Diffusion UI.exe"
-InstallDir "C:\Stable-Diffusion-UI\"
-InstallDirRegKey HKLM "${PRODUCT_DIR_REGKEY}" ""
-ShowInstDetails show
-
-;---------------------------------------------------------------------------------------------------------
-; List of files to be installed
-Section "MainSection" SEC01
-  SetOutPath "$INSTDIR"
-  File "..\CreativeML Open RAIL-M License"
-  File "..\How to install and run.txt"
-  File "..\LICENSE"
-  File "..\Start Stable Diffusion UI.cmd"
-  SetOutPath "$INSTDIR\scripts"
-  File "..\scripts\bootstrap.bat"
-  File "..\scripts\install_status.txt"
-  File "..\scripts\on_env_start.bat"
-  File "C:\windows\system32\curl.exe"
-  CreateDirectory "$INSTDIR\profile"
-  CreateDirectory "$SMPROGRAMS\Stable Diffusion UI"
-  CreateShortCut "$SMPROGRAMS\Stable Diffusion UI\Start Stable Diffusion UI.lnk" "$INSTDIR\Start Stable Diffusion UI.cmd"
-SectionEnd
-
-;---------------------------------------------------------------------------------------------------------
-; Our installer only needs 25 KB, but once it has run, we need 25 GB
-; So we need to overwrite the automatically detected space requirements.
-; https://nsis.sourceforge.io/Docs/Chapter4.html#4.9.13.7
-; The example in section 4.9.13.7 seems to be wrong: the number
-; needs to be provided in Kilobytes.
-Function .onInit
-   ; Set required size of section 'SEC01' to 25 Gigabytes
-   SectionSetSize ${SEC01} 26214400
-  
-  
-   ; Check system meory size. We need at least 8GB
-   ; ----------------------------------------------------
-
-   ; allocate a few bytes of memory
-   System::Alloc 64
-   Pop $1
-
-   ; Retrieve HW info from the Windows Kernel
-   System::Call "*$1(i64)"
-   System::Call "Kernel32::GlobalMemoryStatusEx(i r1)"
-   ; unpack the data into $R2 - $R10
-   System::Call "*$1(i.r2, i.r3, l.r4, l.r5, l.r6, l.r7, l.r8, l.r9, l.r10)"
-
-   # free up the memory
-   System::Free $1
-
-   ; Result mapping:
-   ; "Structure size: $2 bytes"
-   ; "Memory load: $3%"
-   ; "Total physical memory: $4 bytes"
-   ; "Free physical memory: $5 bytes"
-   ; "Total page file: $6 bytes"
-   ; "Free page file: $7 bytes"
-   ; "Total virtual: $8 bytes"
-   ; "Free virtual: $9 bytes"
-
-   ; Mem size in MB
-   System::Int64Op $4 / 1048576
-   Pop $4
-
-   ${If} $4 < "8000"
-      MessageBox MB_OK|MB_ICONEXCLAMATION "Warning!$\n$\nYour system has less than 8GB of memory (RAM).$\n$\n\
-You can still try to install Stable Diffusion UI,$\nbut it might have problems to start, or run$\nvery slowly."
-   ${EndIf}
-  
-FunctionEnd
-
-
-;Section -Post
-;  WriteRegStr HKLM "${PRODUCT_DIR_REGKEY}" "" "$INSTDIR\installer.exe"
-;SectionEnd

README.md

@@ -1,140 +1,106 @@
-# Stable Diffusion UI
+# Stable Diffusion UI v2
-### The easiest way to install and use [Stable Diffusion](https://github.com/CompVis/stable-diffusion) on your own computer. Does not require technical knowledge, does not require pre-installed software. 1-click install, powerful features, friendly community.
+### A simple 1-click way to install and use [Stable Diffusion](https://github.com/CompVis/stable-diffusion) on your own computer. No dependencies or technical knowledge required.
-
-[![Discord Server](https://img.shields.io/discord/1014774730907209781?label=Discord)](https://discord.com/invite/u9yhsFmEkB) (for support, and development discussion) | [Troubleshooting guide for common problems](https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting)
-
-### New: 
-Experimental support for Stable Diffusion 2.0 is available in beta!
-
-----
-
-# Step 1: Download and prepare the installer
-Click the download button for your operating system:
 
 <p float="left">
-  <a href="https://github.com/cmdr2/stable-diffusion-ui/releases/download/v2.4.13/stable-diffusion-ui-windows.zip"><img src="https://github.com/cmdr2/stable-diffusion-ui/raw/main/media/download-win.png" width="200" /></a>
+  <a href="#installation"><img src="https://github.com/cmdr2/stable-diffusion-ui/raw/develop/media/download-win.png" width="200" /></a>
-  <a href="https://github.com/cmdr2/stable-diffusion-ui/releases/download/v2.4.13/stable-diffusion-ui-linux.zip"><img src="https://github.com/cmdr2/stable-diffusion-ui/raw/main/media/download-linux.png" width="200" /></a>
+  <a href="#installation"><img src="https://github.com/cmdr2/stable-diffusion-ui/raw/develop/media/download-linux.png" width="200" /></a>
 </p>
 
-## On Windows:
+[![Discord Server](https://img.shields.io/discord/1014774730907209781?label=Discord)](https://discord.com/invite/u9yhsFmEkB) (for support, and development discussion) | [Troubleshooting guide for common problems](Troubleshooting.md)
-1. Unzip/extract the folder `stable-diffusion-ui` which should be in your downloads folder, unless you changed your default downloads destination.
-2. Move the `stable-diffusion-ui` folder to your `C:` drive (or any other drive like `D:`, at the top root level). `C:\stable-diffusion-ui` or `D:\stable-diffusion-ui` as examples. This will avoid a common problem with Windows (file path length limits).
-## On Linux:
-1. Unzip/extract the folder `stable-diffusion-ui` which should be in your downloads folder, unless you changed your default downloads destination.
-2. Open a terminal window, and navigate to the `stable-diffusion-ui` directory.
 
-# Step 2: Run the program
+️‍🔥🎉 **New!** Task Queue, Negative Prompt, Live Preview, More Samplers, In-Painting, Face Correction (GFPGAN) and Upscaling (RealESRGAN) have been added!
-## On Windows: 
-Double-click `Start Stable Diffusion UI.cmd`.
-If Windows SmartScreen prevents you from running the program click `More info` and then `Run anyway`.
-## On Linux: 
-Run `./start.sh` (or `bash start.sh`) in a terminal.
 
-The installer will take care of whatever is needed. If you face any problems, you can join the friendly [Discord community](https://discord.com/invite/u9yhsFmEkB) and ask for assistance.
+This distribution currently uses Stable Diffusion 1.4. Once the model for 1.5 becomes publicly available, the model in this distribution will be updated.
 
-# Step 3: There is no Step 3. It's that simple!
+# Features in the new v2 Version:
-
+- **No Dependencies or Technical Knowledge Required**: 1-click install for Windows 10/11 and Linux. *No dependencies*, no need for WSL or Docker or Conda or technical setup. Just download and run!
-**To Uninstall:** Just delete the `stable-diffusion-ui` folder to uninstall all the downloaded packages.
+- **Face Correction (GFPGAN) and Upscaling (RealESRGAN)**
-
+- **In-Painting**
-----
+- **Live Preview**: See the image as the AI is drawing it
-
+- **Task Queue**: Queue up all your ideas, without waiting for the current task to finish
-# Easy for new users, powerful features for advanced users
-## Features:
-
-### User experience
-- **Hassle-free installation**: Does not require technical knowledge, does not require pre-installed software. Just download and run!
-- **Clutter-free UI**: A friendly and simple UI, while providing a lot of powerful features.
-
-### Image generation
-- **Supports**: "*Text to Image*" and "*Image to Image*".
-- **In-Painting**: Specify areas of your image to paint into.
-- **Simple Drawing Tool**: Draw basic images to guide the AI, without needing an external drawing program.
-- **Face Correction (GFPGAN)**
-- **Upscaling (RealESRGAN)**
-- **Loopback**: Use the output image as the input image for the next img2img task.
 - **Negative Prompt**: Specify aspects of the image to *remove*.
-- **Attention/Emphasis**: () in the prompt increases the model's attention to enclosed words, and [] decreases it.
+- **Lots of Samplers:** ddim, plms, heun, euler, euler_a, dpm2, dpm2_a, lms
-- **Weighted Prompts**: Use weights for specific words in your prompt to change their importance, e.g. `red:2.4 dragon:1.2`.
-- **Prompt Matrix**: Quickly create multiple variations of your prompt, e.g. `a photograph of an astronaut riding a horse | illustration | cinematic lighting`.
-- **Lots of Samplers**: ddim, plms, heun, euler, euler_a, dpm2, dpm2_a, lms.
-- **1-click Upscale/Face Correction**: Upscale or correct an image after it has been generated.
-- **Make Similar Images**: Click to generate multiple variations of a generated image.
-- **NSFW Setting**: A setting in the UI to control *NSFW content*.
-- **JPEG/PNG output**: Multiple file formats.
-
-### Advanced features
-- **Custom Models**: Use your own `.ckpt` or `.safetensors` file, by placing it inside the `models/stable-diffusion` folder!
-- **Stable Diffusion 2.0 support (experimental)**: available in beta channel.
-- **Use custom VAE models**
-- **Use pre-trained Hypernetworks**
-- **UI Plugins**: Choose from a growing list of [community-generated UI plugins](https://github.com/cmdr2/stable-diffusion-ui/wiki/UI-Plugins), or write your own plugin to add features to the project!
-
-### Performance and security
-- **Low Memory Usage**: Creates 512x512 images with less than 4GB of GPU RAM!
-- **Use CPU setting**: If you don't have a compatible graphics card, but still want to run it on your CPU.
-- **Multi-GPU support**: Automatically spreads your tasks across multiple GPUs (if available), for faster performance!
-- **Auto scan for malicious models**: Uses picklescan to prevent malicious models.
-- **Safetensors support**: Support loading models in the safetensor format, for improved safety.
-- **Auto-updater**: Gets you the latest improvements and bug-fixes to a rapidly evolving project.
-- **Developer Console**: A developer-mode for those who want to modify their Stable Diffusion code, and edit the conda environment.
-
-### Usability:
-- **Live Preview**: See the image as the AI is drawing it.
-- **Task Queue**: Queue up all your ideas, without waiting for the current task to finish.
 - **Image Modifiers**: A library of *modifier tags* like *"Realistic"*, *"Pencil Sketch"*, *"ArtStation"* etc. Experiment with various styles quickly.
-- **Multiple Prompts File**: Queue multiple prompts by entering one prompt per line, or by running a text file.
+- **New UI**: with cleaner design
-- **Save generated images to disk**: Save your images to your PC!
+- **Waifu Model Support**: Just replace the `stable-diffusion\sd-v1-4.ckpt` file after installation with the Waifu model
-- **UI Themes**: Customize the program to your liking.
+- Supports "*Text to Image*" and "*Image to Image*"
+- **NSFW Setting**: A setting in the UI to control *NSFW content*
+- **Use CPU setting**: If you don't have a compatible graphics card, but still want to run it on your CPU.
+- **Auto-updater**: Gets you the latest improvements and bug-fixes to a rapidly evolving project.
+- **Low Memory Usage**: Creates 512x512 images with less than 4GB of VRAM!
 
-**(and a lot more)**
+![Screenshot of advanced settings](media/shot-v9.jpg?raw=true)
-
-----
-
-## Easy for new users:
-![Screenshot of the initial UI](media/shot-v10-simple.jpg?raw=true)
-
-## Powerful features for advanced users:
-![Screenshot of advanced settings](media/shot-v10.jpg?raw=true)
 
 ## Live Preview
-Useful for judging (and stopping) an image quickly, without waiting for it to finish rendering.
-
 ![live-512](https://user-images.githubusercontent.com/844287/192097249-729a0a1e-a677-485e-9ccc-16a9e848fabe.gif)
 
-## Task Queue
-![Screenshot of task queue](media/task-queue-v1.jpg?raw=true)
 
 # System Requirements
 1. Windows 10/11, or Linux. Experimental support for Mac is coming soon.
-2. An NVIDIA graphics card, preferably with 4GB or more of VRAM. If you don't have a compatible graphics card, it'll automatically run in the slower "CPU Mode".
+2. An NVIDIA graphics card, preferably with 4GB or more of VRAM. But if you don't have a compatible graphics card, you can still use it with a "Use CPU" setting. It'll be very slow, but it should still work.
-3. Minimum 8 GB of RAM and 25GB of disk space.
 
-You don't need to install or struggle with Python, Anaconda, Docker etc. The installer will take care of whatever is needed.
+You do not need anything else. You do not need WSL, Docker or Conda. The installer will take care of it.
 
-----
+# Installation
+1. **Download** [for Windows](https://github.com/cmdr2/stable-diffusion-ui/releases/download/v2.16/stable-diffusion-ui-win64.zip) or [for Linux](https://github.com/cmdr2/stable-diffusion-ui/releases/download/v2.16/stable-diffusion-ui-linux.tar.xz).
 
-# How to use?
+2. **Extract**:
-Please refer to our [guide](https://github.com/cmdr2/stable-diffusion-ui/wiki/How-to-Use) to understand how to use the features in this UI.
+  - For Windows: After unzipping the file, please move the `stable-diffusion-ui` folder to your `C:` (or any drive like D:, at the top root level), e.g. `C:\stable-diffusion-ui`. This will avoid a common problem with Windows (file path length limits).
+  - For Linux: After extracting the .tar.xz file, please open a terminal, and go to the `stable-diffusion-ui` directory.
+
+3. **Run**:
+  - For Windows: `Start Stable Diffusion UI.cmd` by double-clicking it.
+  - For Linux: In the terminal, run `./start.sh` (or `bash start.sh`)
+
+This will automatically install Stable Diffusion, set it up, and start the interface. No additional steps are needed.
+
+**To Uninstall:** Just delete the `stable-diffusion-ui` folder to uninstall all the downloaded packages.
+
+
+# Usage
+Open http://localhost:9000 in your browser (after running step 3 previously). It may take a few moments for the back-end to be ready.
+
+## With a text description
+1. Enter a text prompt, like `a photograph of an astronaut riding a horse` in the textbox.
+2. Press `Make Image`. This will take some time, depending on your system's processing power.
+3. See the image generated using your prompt.
+
+## With an image
+1. Click `Browse..` next to `Initial Image`. Select your desired image.
+2. An optional text prompt can help you further describe the kind of image you want to generate.
+3. Press `Make Image`. See the image generated using your prompt.
+
+You can use Face Correction or Upscaling to improve the image further.
+
+**Pro tip:** You can also click `Use as Input` on a generated image, to use it as the input image for your next generation. This can be useful for sequentially refining the generated image with a single click.
+
+**Another tip:** Images with the same aspect ratio of your generated image work best. E.g. 1:1 if you're generating images sized 512x512.
+
+## Problems? Troubleshooting
+Please try the common [troubleshooting](Troubleshooting.md) steps. If that doesn't fix it, please ask on the [discord server](https://discord.com/invite/u9yhsFmEkB), or [file an issue](https://github.com/cmdr2/stable-diffusion-ui/issues).
+
+# Image Settings
+You can also set the configuration like `seed`, `width`, `height`, `num_outputs`, `num_inference_steps` and `guidance_scale` using the 'show' button next to 'Image settings'.
+
+Use the same `seed` number to get the same image for a certain prompt. This is useful for refining a prompt without losing the basic image design. Enable the `random images` checkbox to get random images.
+
+![Screenshot of advanced settings](media/config-v6.jpg?raw=true)
+
+# System Settings
+The system settings are reachable via the cogwheel symbol on the top right. It can be used to configure whether all generated images should 
+saved be automically, or to tune the Stable Diffusion image generation.
+
+![Screenshot of advanced settings](media/system-settings-v2.jpg?raw=true)
+
+# Image Modifiers
+![Screenshot of advanced settings](media/modifiers-v1.jpg?raw=true)
 
 # Bugs reports and code contributions welcome
 If there are any problems or suggestions, please feel free to ask on the [discord server](https://discord.com/invite/u9yhsFmEkB) or [file an issue](https://github.com/cmdr2/stable-diffusion-ui/issues).
 
-We could really use help on these aspects (click to view tasks that need your help):
+Also, please feel free to submit a pull request, if you have any code contributions in mind. Join the [discord server](https://discord.com/invite/u9yhsFmEkB) for development-related discussions, and for helping other users.
-* [User Interface](https://github.com/users/cmdr2/projects/1/views/1)
-* [Engine](https://github.com/users/cmdr2/projects/3/views/1)
-* [Installer](https://github.com/users/cmdr2/projects/4/views/1)
-* [Documentation](https://github.com/users/cmdr2/projects/5/views/1)
-
-If you have any code contributions in mind, please feel free to say Hi to us on the [discord server](https://discord.com/invite/u9yhsFmEkB). We use the Discord server for development-related discussions, and for helping users.
 
 # Disclaimer
 The authors of this project are not responsible for any content generated using this interface.
 
-The license of this software forbids you from sharing any content that:
+The license of this software forbids you from sharing any content that violates any laws, produce any harm to a person, disseminate any personal information that would be meant for harm, spread misinformation, or target vulnerable groups. For the full list of restrictions please read [the license](LICENSE). You agree to these terms by using this software.
-- Violates any laws.
-- Produces any harm to a person or persons.
-- Disseminates (spreads) any personal information that would be meant for harm.
-- Spreads misinformation.
-- Target vulnerable groups. 
-
-For the full list of restrictions please read [the License](LICENSE). You agree to these terms by using this software.

Troubleshooting.md

@@ -0,0 +1,75 @@
+Common issues and their solutions. If these solutions don't work, please feel free to ask at the [discord server](https://discord.com/invite/u9yhsFmEkB) or [file an issue](https://github.com/cmdr2/stable-diffusion-ui/issues).
+
+## RuntimeError: CUDA out of memory
+This can happen if your PC has less than 6GB of VRAM.
+
+Try disabling the "Turbo mode" setting under "Advanced Settings", since that takes an additional 1 GB of VRAM (to increase the speed).
+
+Additionally, a common reason for this error is that you're using an initial image larger than 768x768 pixels. Try using a smaller initial image.
+
+Also try generating smaller sized images.
+
+## basicsr module not found
+For Windows: Please download and extract basicsr from [here](https://github.com/cmdr2/stable-diffusion-ui/releases/download/v2.16/basicsr-win64.zip), and place the `basicsr` folder inside the `stable-diffusion-ui\stable-diffusion\env\lib\site-packages` folder. Then run the `Start Stable Diffusion UI.cmd` file again.
+
+For Linux: Please contact on the [discord server](https://discord.com/invite/u9yhsFmEkB).
+
+## No ldm found, or antlr4 or any other missing module, or ClobberError: This transaction has incompatible packages due to a shared path
+On Windows, please ensure that you had placed the `stable-diffusion-ui` folder after unzipping to the root of C: or D: (or any drive). For e.g. `C:\stable-diffusion-ui`. **Note:** This has to be done **before** you start the installation process. If you have already installed (and are facing this error), please delete the installed folder, and start fresh by unzipping and placing the folder at the top of your drive.
+
+This error can also be caused if you already have conda/miniconda/anaconda installed, due to package conflicts. Please open your Anaconda Prompt, and run `conda clean --all` to clean up unused packages.
+
+If nothing works, this could be due to a corrupted installation. Please try reinstalling this, by deleting the installed folder, and unzipping from the downloaded zip file.
+
+## Killed uvicorn server:app --app-dir ... --port 9000 --host 0.0.0.0
+This happens if your PC ran out of RAM. Stable Diffusion requires a lot of RAM, and requires atleast 10 GB of RAM to work well. You can also try closing all other applications before running Stable Diffusion UI.
+
+## Green image generated
+This usually happens if you're running NVIDIA 1650 or 1660 Super. To solve this, please close and run the Stable Diffusion command on your computer. If you're using the older Docker-based solution (v1), please upgrade to v2: https://github.com/cmdr2/stable-diffusion-ui/tree/v2#installation
+
+If you're still seeing this error, please try enabling "Full Precision" under "Advanced Settings" in the Stable Diffusion UI.
+
+## './docker-compose.yml' is invalid:
+> ERROR: The Compose file './docker-compose.yml' is invalid because:
+> services.stability-ai.deploy.resources.reservations value Additional properties are not allowed ('devices' was unexpected)
+
+Please ensure you have `docker-compose` version 1.29 or higher. Check `docker-compose --version`, and if required [update it to 1.29](https://docs.docker.com/compose/install/). (Thanks [HVRyan](https://github.com/HVRyan))
+
+## RuntimeError: Found no NVIDIA driver on your system:
+If you have an NVIDIA GPU and the latest [NVIDIA driver](http://www.nvidia.com/Download/index.aspx), please ensure that you've installed [nvidia-container-toolkit](https://stackoverflow.com/a/58432877). (Thanks [u/exintrovert420](https://www.reddit.com/user/exintrovert420/))
+
+## Some other process is already running at port 9000 / port 9000 could not be bound
+You can override the port used. Please change `docker-compose.yml` inside the project directory, and update the line `9000:9000` to `1337:9000` (where 1337 is whichever port number you want).
+
+After doing this, please restart your server, by running `./server restart`.
+
+After this, you can access the server at `http://localhost:1337` (where 1337 is the new port you specified earlier).
+
+## RuntimeError: CUDA error: unknown error
+Please ensure that you have an NVIDIA GPU and the latest [NVIDIA driver](http://www.nvidia.com/Download/index.aspx), and that you've installed [nvidia-container-toolkit](https://stackoverflow.com/a/58432877).
+
+Also, if you are using WSL (Windows), please ensure you have the latest WSL kernel by running `wsl --shutdown` and then `wsl --update`. (Thanks [AndrWeisR](https://github.com/AndrWeisR))
+
+# For support queries
+## Entering a conda environment in an existing installation
+This will give you an activated conda environment in the terminal, so you can run commands and force-install any packages, if required.
+
+Users don't need to have the Anaconda Prompt installed to do this anymore, since the installer bundles a portable version of conda inside it. Just follow these steps.
+
+**Windows:**
+1. Open the terminal: Press Win+R, type "cmd", and press "Run"
+2. Type `cd C:\stable-diffusion-ui` and press enter (or wherever you've installed it)
+3. Type `installer\Scripts\activate.bat` and press enter
+4. Type `cd stable-diffusion` and press enter
+5. Type `conda activate .\env` and press enter
+6. Type `python --version` and press enter. You should see 3.8.5.
+
+**Windows:**
+1. Open the terminal
+2. Type `cd /path/to/stable-diffusion-ui` and press enter
+3. Type `installer/bin/activate` and press enter
+4. Type `cd stable-diffusion` and press enter
+5. Type `conda activate ./env` and press enter
+6. Type `python --version` and press enter. You should see 3.8.5.
+
+This will give you an activated conda environment. To confirm, type `python --version` and press enter. You should see 3.8.5.

build.bat

@@ -8,40 +8,40 @@
 set /p answer=Are you a developer of this project (Y/N)?
 if /i "%answer:~,1%" NEQ "Y" exit /b
 
-mkdir dist\win\stable-diffusion-ui\scripts
+@set PYTHONNOUSERSITE=1
-@REM mkdir dist\linux-mac\stable-diffusion-ui\scripts
 
-@rem copy the installer files for Windows
+@mkdir dist\stable-diffusion-ui
 
-copy scripts\on_env_start.bat dist\win\stable-diffusion-ui\scripts\
+@echo "Downloading components for the installer.."
-copy scripts\bootstrap.bat dist\win\stable-diffusion-ui\scripts\
-copy "scripts\Start Stable Diffusion UI.cmd" dist\win\stable-diffusion-ui\
-copy LICENSE dist\win\stable-diffusion-ui\
-copy "CreativeML Open RAIL-M License" dist\win\stable-diffusion-ui\
-copy "How to install and run.txt" dist\win\stable-diffusion-ui\
-echo. > dist\win\stable-diffusion-ui\scripts\install_status.txt
 
-@rem copy the installer files for Linux and Mac
+@call conda env create --prefix installer -f environment.yaml
+@call conda activate .\installer
 
-@REM copy scripts\on_env_start.sh dist\linux-mac\stable-diffusion-ui\scripts\
+@echo "Creating a distributable package.."
-@REM copy scripts\bootstrap.sh dist\linux-mac\stable-diffusion-ui\scripts\
-@REM copy scripts\start.sh dist\linux-mac\stable-diffusion-ui\
-@REM copy LICENSE dist\linux-mac\stable-diffusion-ui\
-@REM copy "CreativeML Open RAIL-M License" dist\linux-mac\stable-diffusion-ui\
-@REM copy "How to install and run.txt" dist\linux-mac\stable-diffusion-ui\
-@REM echo. > dist\linux-mac\stable-diffusion-ui\scripts\install_status.txt
 
-@rem make the zip
+@call conda install -c conda-forge -y conda-pack
+@call conda pack --n-threads -1 --prefix installer --format tar
 
-cd dist\win
+@cd dist\stable-diffusion-ui
-call powershell Compress-Archive -Path stable-diffusion-ui -DestinationPath ..\stable-diffusion-ui-windows.zip
+@mkdir installer
-cd ..\..
 
-@REM cd dist\linux-mac
+@call tar -xf ..\..\installer.tar -C installer
-@REM call powershell Compress-Archive -Path stable-diffusion-ui -DestinationPath ..\stable-diffusion-ui-linux.zip
-@REM call powershell Compress-Archive -Path stable-diffusion-ui -DestinationPath ..\stable-diffusion-ui-mac.zip
-@REM cd ..\..
 
-echo "Build ready. Upload the zip files inside the 'dist' folder."
+@mkdir scripts
 
-pause
+@copy ..\..\scripts\on_env_start.bat scripts\
+@copy "..\..\scripts\Start Stable Diffusion UI.cmd" .
+@copy ..\..\LICENSE .
+@copy "..\..\CreativeML Open RAIL-M License" .
+@copy "..\..\How to install and run.txt" .
+@echo. > scripts\install_status.txt
+
+@echo "Build ready. Zip the 'dist\stable-diffusion-ui' folder."
+
+@echo "Cleaning up.."
+
+@cd ..\..
+
+@rmdir /s /q installer
+
+@del installer.tar

build.sh

@@ -11,39 +11,45 @@ case $yn in
     * ) exit;;
 esac
 
-# mkdir -p dist/win/stable-diffusion-ui/scripts
+export PYTHONNOUSERSITE=1
-mkdir -p dist/linux-mac/stable-diffusion-ui/scripts
 
-# copy the installer files for Windows
+mkdir -p dist/stable-diffusion-ui
 
-# cp scripts/on_env_start.bat dist/win/stable-diffusion-ui/scripts/
+echo "Downloading components for the installer.."
-# cp scripts/bootstrap.bat dist/win/stable-diffusion-ui/scripts/
-# cp "scripts/Start Stable Diffusion UI.cmd" dist/win/stable-diffusion-ui/
-# cp LICENSE dist/win/stable-diffusion-ui/
-# cp "CreativeML Open RAIL-M License" dist/win/stable-diffusion-ui/
-# cp "How to install and run.txt" dist/win/stable-diffusion-ui/
-# echo "" > dist/win/stable-diffusion-ui/scripts/install_status.txt
 
-# copy the installer files for Linux and Mac
+source ~/miniconda3/etc/profile.d/conda.sh
 
-cp scripts/on_env_start.sh dist/linux-mac/stable-diffusion-ui/scripts/
+conda install -c conda-forge -y conda-pack
-cp scripts/bootstrap.sh dist/linux-mac/stable-diffusion-ui/scripts/
-cp scripts/functions.sh dist/linux-mac/stable-diffusion-ui/scripts/
-cp scripts/start.sh dist/linux-mac/stable-diffusion-ui/
-cp LICENSE dist/linux-mac/stable-diffusion-ui/
-cp "CreativeML Open RAIL-M License" dist/linux-mac/stable-diffusion-ui/
-cp "How to install and run.txt" dist/linux-mac/stable-diffusion-ui/
-echo "" > dist/linux-mac/stable-diffusion-ui/scripts/install_status.txt
 
-# make the zip
+conda env create --prefix installer -f environment.yaml
+conda activate ./installer
 
-# cd dist/win
+echo "Creating a distributable package.."
-# zip -r ../stable-diffusion-ui-windows.zip stable-diffusion-ui
+
-# cd ../..
+conda pack --n-threads -1 --prefix installer --format tar
+
+cd dist/stable-diffusion-ui
+mkdir installer
+
+tar -xf ../../installer.tar -C installer
+
+mkdir scripts
+
+cp ../../scripts/on_env_start.sh scripts/
+cp ../../scripts/start.sh .
+cp ../../LICENSE .
+cp "../../CreativeML Open RAIL-M License" .
+cp "../../How to install and run.txt" .
+echo "" > scripts/install_status.txt
+
+chmod u+x start.sh
+
+echo "Build ready. Zip the 'dist/stable-diffusion-ui' folder."
+
+echo "Cleaning up.."
 
-cd dist/linux-mac
-zip -r ../stable-diffusion-ui-linux.zip stable-diffusion-ui
-zip -r ../stable-diffusion-ui-mac.zip stable-diffusion-ui
 cd ../..
 
-echo "Build ready. Upload the zip files inside the 'dist' folder."
+rm -rf installer
+
+rm installer.tar

scripts/Developer Console.cmd

@@ -1,46 +0,0 @@
-@echo off
-
-echo "Opening Stable Diffusion UI - Developer Console.." & echo.
-
-set PATH=C:\Windows\System32;%PATH%
-
-@rem set legacy and new installer's PATH, if they exist
-if exist "installer" set PATH=%cd%\installer;%cd%\installer\Library\bin;%cd%\installer\Scripts;%cd%\installer\Library\usr\bin;%PATH%
-if exist "installer_files\env" set PATH=%cd%\installer_files\env;%cd%\installer_files\env\Library\bin;%cd%\installer_files\env\Scripts;%cd%\installer_files\Library\usr\bin;%PATH%
-
-set PYTHONPATH=%cd%\installer;%cd%\installer_files\env
-
-@rem activate the installer env
-call conda activate
-
-@rem Test the environment
-echo "Environment Info:"
-call where git
-call git --version
-
-call where conda
-call conda --version
-
-echo.
-
-@rem activate the environment
-call conda activate .\stable-diffusion\env
-
-call where python
-call python --version
-
-@rem set the PYTHONPATH
-cd stable-diffusion
-set SD_DIR=%cd%
-
-cd env\lib\site-packages
-set PYTHONPATH=%SD_DIR%;%cd%
-cd ..\..\..
-echo PYTHONPATH=%PYTHONPATH%
-
-cd ..
-
-@rem done
-echo.
-
-cmd /k

scripts/Start Stable Diffusion UI.cmd

@@ -1,27 +1,19 @@
 @echo off
 
-cd /d %~dp0
+@REM Delete the post-activate hook from the old installer
-set PATH=C:\Windows\System32;%PATH%
+if exist "installer\etc\conda\activate.d\post_activate.bat" (
+    echo. > installer\etc\conda\activate.d\post_activate.bat
+)
 
-@rem set legacy installer's PATH, if it exists
+@call installer\Scripts\activate.bat
-if exist "installer" set PATH=%cd%\installer;%cd%\installer\Library\bin;%cd%\installer\Scripts;%cd%\installer\Library\usr\bin;%PATH%
 
-@rem Setup the packages required for the installer
+@call conda-unpack
-call scripts\bootstrap.bat
 
-@rem set new installer's PATH, if it downloaded any packages
+@call conda --version
-if exist "installer_files\env" set PATH=%cd%\installer_files\env;%cd%\installer_files\env\Library\bin;%cd%\installer_files\env\Scripts;%cd%\installer_files\Library\usr\bin;%PATH%
+@call git --version
 
-set PYTHONPATH=%cd%\installer;%cd%\installer_files\env
+@cd installer
 
-@rem Test the bootstrap
+@call ..\scripts\on_env_start.bat
-call where git
-call git --version
-
-call where conda
-call conda --version
-
-@rem Download the rest of the installer and UI
-call scripts\on_env_start.bat
 
 @pause

scripts/bootstrap.bat

@@ -1,77 +0,0 @@
-@echo off
-
-@rem This script will install git and conda (if not found on the PATH variable)
-@rem  using micromamba (an 8mb static-linked single-file binary, conda replacement).
-@rem For users who already have git and conda, this step will be skipped.
-
-@rem This enables a user to install this project without manually installing conda and git.
-
-@rem config
-set MAMBA_ROOT_PREFIX=%cd%\installer_files\mamba
-set INSTALL_ENV_DIR=%cd%\installer_files\env
-set LEGACY_INSTALL_ENV_DIR=%cd%\installer
-set MICROMAMBA_DOWNLOAD_URL=https://github.com/cmdr2/stable-diffusion-ui/releases/download/v1.1/micromamba.exe
-set umamba_exists=F
-
-set OLD_APPDATA=%APPDATA%
-set OLD_USERPROFILE=%USERPROFILE%
-set APPDATA=%cd%\installer_files\appdata
-set USERPROFILE=%cd%\profile
-
-@rem figure out whether git and conda needs to be installed
-if exist "%INSTALL_ENV_DIR%" set PATH=%INSTALL_ENV_DIR%;%INSTALL_ENV_DIR%\Library\bin;%INSTALL_ENV_DIR%\Scripts;%INSTALL_ENV_DIR%\Library\usr\bin;%PATH%
-
-set PACKAGES_TO_INSTALL=
-
-if not exist "%LEGACY_INSTALL_ENV_DIR%\etc\profile.d\conda.sh" (
-    if not exist "%INSTALL_ENV_DIR%\etc\profile.d\conda.sh" set PACKAGES_TO_INSTALL=%PACKAGES_TO_INSTALL% conda
-)
-
-call git --version >.tmp1 2>.tmp2
-if "%ERRORLEVEL%" NEQ "0" set PACKAGES_TO_INSTALL=%PACKAGES_TO_INSTALL% git
-
-call "%MAMBA_ROOT_PREFIX%\micromamba.exe" --version >.tmp1 2>.tmp2
-if "%ERRORLEVEL%" EQU "0" set umamba_exists=T
-
-@rem (if necessary) install git and conda into a contained environment
-if "%PACKAGES_TO_INSTALL%" NEQ "" (
-    @rem download micromamba
-    if "%umamba_exists%" == "F" (
-        echo "Downloading micromamba from %MICROMAMBA_DOWNLOAD_URL% to %MAMBA_ROOT_PREFIX%\micromamba.exe"
-
-        mkdir "%MAMBA_ROOT_PREFIX%"
-        call curl -Lk "%MICROMAMBA_DOWNLOAD_URL%" > "%MAMBA_ROOT_PREFIX%\micromamba.exe"
-
-        if "%ERRORLEVEL%" NEQ "0" (
-            echo "There was a problem downloading micromamba. Cannot continue."
-            pause
-            exit /b
-        )
-
-        mkdir "%APPDATA%"
-        mkdir "%USERPROFILE%"
-
-        @rem test the mamba binary
-        echo Micromamba version:
-        call "%MAMBA_ROOT_PREFIX%\micromamba.exe" --version
-    )
-
-    @rem create the installer env
-    if not exist "%INSTALL_ENV_DIR%" (
-        call "%MAMBA_ROOT_PREFIX%\micromamba.exe" create -y --prefix "%INSTALL_ENV_DIR%"
-    )
-
-    echo "Packages to install:%PACKAGES_TO_INSTALL%"
-
-    call "%MAMBA_ROOT_PREFIX%\micromamba.exe" install -y --prefix "%INSTALL_ENV_DIR%" -c conda-forge %PACKAGES_TO_INSTALL%
-
-    if not exist "%INSTALL_ENV_DIR%" (
-        echo "There was a problem while installing%PACKAGES_TO_INSTALL% using micromamba. Cannot continue."
-        pause
-        exit /b
-    )
-)
-
-@rem revert to the old APPDATA. only needed it for bypassing a bug in micromamba (with special characters)
-set APPDATA=%OLD_APPDATA%
-set USERPROFILE=%OLD_USERPROFILE%

scripts/bootstrap.sh

@@ -1,86 +0,0 @@
-#!/bin/bash
-
-# This script will install git and conda (if not found on the PATH variable)
-#  using micromamba (an 8mb static-linked single-file binary, conda replacement).
-# For users who already have git and conda, this step will be skipped.
-
-# This enables a user to install this project without manually installing conda and git.
-
-source ./scripts/functions.sh
-
-set -o pipefail
-
-OS_NAME=$(uname -s)
-case "${OS_NAME}" in
-    Linux*)     OS_NAME="linux";;
-    Darwin*)    OS_NAME="osx";;
-    *)          echo "Unknown OS: $OS_NAME! This script runs only on Linux or Mac" && exit
-esac
-
-OS_ARCH=$(uname -m)
-case "${OS_ARCH}" in
-    x86_64*)    OS_ARCH="64";;
-    arm64*)     OS_ARCH="arm64";;
-    *)          echo "Unknown system architecture: $OS_ARCH! This script runs only on x86_64 or arm64" && exit
-esac
-
-# https://mamba.readthedocs.io/en/latest/installation.html
-if [ "$OS_NAME" == "linux" ] && [ "$OS_ARCH" == "arm64" ]; then OS_ARCH="aarch64"; fi
-
-# config
-export MAMBA_ROOT_PREFIX="$(pwd)/installer_files/mamba"
-INSTALL_ENV_DIR="$(pwd)/installer_files/env"
-LEGACY_INSTALL_ENV_DIR="$(pwd)/installer"
-MICROMAMBA_DOWNLOAD_URL="https://micro.mamba.pm/api/micromamba/${OS_NAME}-${OS_ARCH}/latest"
-umamba_exists="F"
-
-# figure out whether git and conda needs to be installed
-if [ -e "$INSTALL_ENV_DIR" ]; then export PATH="$INSTALL_ENV_DIR/bin:$PATH"; fi
-
-PACKAGES_TO_INSTALL=""
-
-if [ ! -e "$LEGACY_INSTALL_ENV_DIR/etc/profile.d/conda.sh" ] && [ ! -e "$INSTALL_ENV_DIR/etc/profile.d/conda.sh" ]; then PACKAGES_TO_INSTALL="$PACKAGES_TO_INSTALL conda"; fi
-if ! hash "git" &>/dev/null; then PACKAGES_TO_INSTALL="$PACKAGES_TO_INSTALL git"; fi
-
-if "$MAMBA_ROOT_PREFIX/micromamba" --version &>/dev/null; then umamba_exists="T"; fi
-
-# (if necessary) install git and conda into a contained environment
-if [ "$PACKAGES_TO_INSTALL" != "" ]; then
-    # download micromamba
-    if [ "$umamba_exists" == "F" ]; then
-        echo "Downloading micromamba from $MICROMAMBA_DOWNLOAD_URL to $MAMBA_ROOT_PREFIX/micromamba"
-
-        mkdir -p "$MAMBA_ROOT_PREFIX"
-        curl -L "$MICROMAMBA_DOWNLOAD_URL" | tar -xvj bin/micromamba -O > "$MAMBA_ROOT_PREFIX/micromamba"
-
-        if [ "$?" != "0" ]; then
-            echo
-            echo "EE micromamba download failed"
-            echo "EE If the lines above contain 'bzip2: Cannot exec', your system doesn't have bzip2 installed"
-            echo "EE If there are network errors, please check your internet setup"
-            fail "micromamba download failed"
-        fi
-
-        chmod u+x "$MAMBA_ROOT_PREFIX/micromamba"
-
-        # test the mamba binary
-        echo "Micromamba version:"
-        "$MAMBA_ROOT_PREFIX/micromamba" --version
-    fi
-
-    # create the installer env
-    if [ ! -e "$INSTALL_ENV_DIR" ]; then
-        "$MAMBA_ROOT_PREFIX/micromamba" create -y --prefix "$INSTALL_ENV_DIR" || fail "unable to create the install environment"
-    fi
-   
-    if [ ! -e "$INSTALL_ENV_DIR" ]; then
-        fail "There was a problem while installing$PACKAGES_TO_INSTALL using micromamba. Cannot continue."
-    fi
-
-    echo "Packages to install:$PACKAGES_TO_INSTALL"
-
-    "$MAMBA_ROOT_PREFIX/micromamba" install -y --prefix "$INSTALL_ENV_DIR" -c conda-forge $PACKAGES_TO_INSTALL
-    if [ "$?" != "0" ]; then
-        fail "Installation of the packages '$PACKAGES_TO_INSTALL' failed."
-    fi
-fi

scripts/developer_console.sh

@@ -1,51 +0,0 @@
-#!/bin/bash
-
-cd "$(dirname "${BASH_SOURCE[0]}")"
-
-if [ "$0" == "bash" ]; then
-  echo "Opening Stable Diffusion UI - Developer Console.."
-  echo ""
-
-  # set legacy and new installer's PATH, if they exist
-  if [ -e "installer" ]; then export PATH="$(pwd)/installer/bin:$PATH"; fi
-  if [ -e "installer_files/env" ]; then export PATH="$(pwd)/installer_files/env/bin:$PATH"; fi
-
-  # activate the installer env
-  CONDA_BASEPATH=$(conda info --base)
-  source "$CONDA_BASEPATH/etc/profile.d/conda.sh" # avoids the 'shell not initialized' error
-
-  conda activate
-
-  # test the environment
-  echo "Environment Info:"
-  which git
-  git --version
-
-  which conda
-  conda --version
-
-  echo ""
-
-  # activate the environment
-  CONDA_BASEPATH=$(conda info --base)
-  source "$CONDA_BASEPATH/etc/profile.d/conda.sh" # otherwise conda complains about 'shell not initialized' (needed when running in a script)
-
-  conda activate ./stable-diffusion/env
-
-  which python
-  python --version
-
-  # set the PYTHONPATH
-  cd stable-diffusion
-  SD_PATH=`pwd`
-  export PYTHONPATH="$SD_PATH:$SD_PATH/env/lib/python3.8/site-packages"
-  echo "PYTHONPATH=$PYTHONPATH"
-  cd ..
-
-  # done
-
-  echo ""
-else
-  file_name=$(basename "${BASH_SOURCE[0]}")
-  bash --init-file "$file_name"
-fi

scripts/functions.sh

@@ -1,32 +0,0 @@
-#
-# utility functions for all scripts
-#
-
-fail() {
-    echo
-    echo "EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE"
-    echo
-    if [ "$1" != "" ]; then
-        echo ERROR: $1
-    else
-        echo An error occurred.
-    fi
-    cat <<EOF
-
-Error downloading Stable Diffusion UI. Sorry about that, please try to:
- 1. Run this installer again.
- 2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting
- 3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB
- 4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues
-
-Thanks!
-
-
-EOF
-    read -p "Press any key to continue"
-    exit 1
-
-}
-
-
-

scripts/on_env_start.bat

@@ -4,6 +4,8 @@
 
 set PATH=C:\Windows\System32;%PATH%
 
+@cd ..
+
 if exist "scripts\config.bat" (
     @call scripts\config.bat
 )
@@ -12,7 +14,7 @@ if "%update_branch%"=="" (
     set update_branch=main
 )
 
-@>nul findstr /m "conda_sd_ui_deps_installed" scripts\install_status.txt
+@>nul grep -c "conda_sd_ui_deps_installed" scripts\install_status.txt
 @if "%ERRORLEVEL%" NEQ "0" (
     for /f "tokens=*" %%a in ('python -c "import os; parts = os.getcwd().split(os.path.sep); print(len(parts))"') do if "%%a" NEQ "2" (
         echo. & echo "!!!! WARNING !!!!" & echo.
@@ -26,14 +28,14 @@ if "%update_branch%"=="" (
     )
 )
 
-@>nul findstr /m "sd_ui_git_cloned" scripts\install_status.txt
+@>nul grep -c "sd_ui_git_cloned" scripts\install_status.txt
 @if "%ERRORLEVEL%" EQU "0" (
     @echo "Stable Diffusion UI's git repository was already installed. Updating from %update_branch%.."
 
     @cd sd-ui-files
 
     @call git reset --hard
-    @call git -c advice.detachedHead=false checkout "%update_branch%"
+    @call git checkout "%update_branch%"
     @call git pull
 
     @cd ..
@@ -44,18 +46,16 @@ if "%update_branch%"=="" (
     @call git clone -b "%update_branch%" https://github.com/cmdr2/stable-diffusion-ui.git sd-ui-files && (
         @echo sd_ui_git_cloned >> scripts\install_status.txt
     ) || (
-        @echo "Error downloading Stable Diffusion UI. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!"
+        @echo "Error downloading Stable Diffusion UI. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!"
         pause
         @exit /b
     )
 )
 
-@xcopy sd-ui-files\ui ui /s /i /Y /q
+@xcopy sd-ui-files\ui ui /s /i /Y
 @copy sd-ui-files\scripts\on_sd_start.bat scripts\ /Y
-@copy sd-ui-files\scripts\bootstrap.bat scripts\ /Y
 @copy "sd-ui-files\scripts\Start Stable Diffusion UI.cmd" . /Y
-@copy "sd-ui-files\scripts\Developer Console.cmd" . /Y
 
 @call scripts\on_sd_start.bat
 
-@pause
+@pause

scripts/on_env_start.sh

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-source ./scripts/functions.sh
-
 printf "\n\nStable Diffusion UI\n\n"
 
 if [ -f "scripts/config.sh" ]; then
@@ -18,7 +16,7 @@ if [ -f "scripts/install_status.txt" ] && [ `grep -c sd_ui_git_cloned scripts/in
     cd sd-ui-files
 
     git reset --hard
-    git -c advice.detachedHead=false checkout "$update_branch"
+    git checkout "$update_branch"
     git pull
 
     cd ..
@@ -29,16 +27,16 @@ else
     if git clone -b "$update_branch" https://github.com/cmdr2/stable-diffusion-ui.git sd-ui-files ; then
         echo sd_ui_git_cloned >> scripts/install_status.txt
     else
-        fail "git clone failed"
+        printf "\n\nError downloading Stable Diffusion UI. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 fi
 
 rm -rf ui
 cp -Rf sd-ui-files/ui .
 cp sd-ui-files/scripts/on_sd_start.sh scripts/
-cp sd-ui-files/scripts/bootstrap.sh scripts/
 cp sd-ui-files/scripts/start.sh .
-cp sd-ui-files/scripts/developer_console.sh .
 
 ./scripts/on_sd_start.sh
 

scripts/on_sd_start.bat

@@ -1,73 +1,49 @@
 @echo off
 
+@copy sd-ui-files\scripts\on_env_start.bat scripts\ /Y
+
 @REM Caution, this file will make your eyes and brain bleed. It's such an unholy mess.
 @REM Note to self: Please rewrite this in Python. For the sake of your own sanity.
 
-@copy sd-ui-files\scripts\on_env_start.bat scripts\ /Y
-@copy sd-ui-files\scripts\bootstrap.bat scripts\ /Y
-
-if exist "%cd%\profile" (
-    set USERPROFILE=%cd%\profile
-)
-
-@mkdir tmp
-@set TMP=%cd%\tmp
-@set TEMP=%cd%\tmp
-
-@rem activate the installer env
-call conda activate
-@if "%ERRORLEVEL%" NEQ "0" (
-       @echo. & echo "Error activating conda for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
-       pause
-       exit /b
-)
-
-@REM remove the old version of the dev console script, if it's still present
-if exist "Open Developer Console.cmd" del "Open Developer Console.cmd"
-
 @call python -c "import os; import shutil; frm = 'sd-ui-files\\ui\\hotfix\\9c24e6cd9f499d02c4f21a033736dabd365962dc80fe3aeb57a8f85ea45a20a3.26fead7ea4f0f843f6eb4055dfd25693f1a71f3c6871b184042d4b126244e142'; dst = os.path.join(os.path.expanduser('~'), '.cache', 'huggingface', 'transformers', '9c24e6cd9f499d02c4f21a033736dabd365962dc80fe3aeb57a8f85ea45a20a3.26fead7ea4f0f843f6eb4055dfd25693f1a71f3c6871b184042d4b126244e142'); shutil.copyfile(frm, dst) if os.path.exists(dst) else print(''); print('Hotfixed broken JSON file from OpenAI');"
 
-if NOT DEFINED test_sd2 set test_sd2=N
+@>nul grep -c "sd_git_cloned" scripts\install_status.txt
-
-@>nul findstr /m "sd_git_cloned" scripts\install_status.txt
 @if "%ERRORLEVEL%" EQU "0" (
     @echo "Stable Diffusion's git repository was already installed. Updating.."
 
     @cd stable-diffusion
 
-    @call git remote set-url origin https://github.com/easydiffusion/diffusion-kit.git
-
     @call git reset --hard
     @call git pull
+    @call git checkout f6cfebffa752ee11a7b07497b8529d5971de916c
 
-    if "%test_sd2%" == "N" (
+    @call git apply ..\ui\sd_internal\ddim_callback.patch
-        @call git -c advice.detachedHead=false checkout 7f32368ed1030a6e710537047bacd908adea183a
+    @call git apply ..\ui\sd_internal\env_yaml.patch
-    )
-    if "%test_sd2%" == "Y" (
-        @call git -c advice.detachedHead=false checkout 733a1f6f9cae9b9a9b83294bf3281b123378cb1f
-    )
 
     @cd ..
 ) else (
     @echo. & echo "Downloading Stable Diffusion.." & echo.
 
-    @call git clone https://github.com/easydiffusion/diffusion-kit.git stable-diffusion && (
+    @call git clone https://github.com/basujindal/stable-diffusion.git && (
         @echo sd_git_cloned >> scripts\install_status.txt
     ) || (
-        @echo "Error downloading Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!"
+        @echo "Error downloading Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!"
         pause
         @exit /b
     )
 
     @cd stable-diffusion
-    @call git -c advice.detachedHead=false checkout 7f32368ed1030a6e710537047bacd908adea183a
+    @call git checkout f6cfebffa752ee11a7b07497b8529d5971de916c
+
+    @call git apply ..\ui\sd_internal\ddim_callback.patch
+    @call git apply ..\ui\sd_internal\env_yaml.patch
 
     @cd ..
 )
 
 @cd stable-diffusion
 
-@>nul findstr /m "conda_sd_env_created" ..\scripts\install_status.txt
+@>nul grep -c "conda_sd_env_created" ..\scripts\install_status.txt
 @if "%ERRORLEVEL%" EQU "0" (
     @echo "Packages necessary for Stable Diffusion were already installed"
 
@@ -80,20 +56,22 @@ if NOT DEFINED test_sd2 set test_sd2=N
     @REM prevent conda from using packages from the user's home directory, to avoid conflicts
     @set PYTHONNOUSERSITE=1
 
-    set USERPROFILE=%cd%\profile
-
-    set PYTHONPATH=%cd%;%cd%\env\lib\site-packages
-
     @call conda env create --prefix env -f environment.yaml || (
-        @echo. & echo "Error installing the packages necessary for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        @echo. & echo "Error installing the packages necessary for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
         pause
         exit /b
     )
 
     @call conda activate .\env
 
+    @call conda install -c conda-forge -y --prefix env antlr4-python3-runtime=4.8 || (
+        @echo. & echo "Error installing antlr4-python3-runtime for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        pause
+        exit /b
+    )
+
     for /f "tokens=*" %%a in ('python -c "import torch; import ldm; import transformers; import numpy; import antlr4; print(42)"') do if "%%a" NEQ "42" (
-        @echo. & echo "Dependency test failed! Error installing the packages necessary for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        @echo. & echo "Dependency test failed! Error installing the packages necessary for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
         pause
         exit /b
     )
@@ -101,22 +79,9 @@ if NOT DEFINED test_sd2 set test_sd2=N
     @echo conda_sd_env_created >> ..\scripts\install_status.txt
 )
 
-@rem allow rolling back the sdkit-based changes
-if exist "src-old" (
-    if not exist "src" (
-        rename "src-old" "src"
-
-        if exist "ldm-old" (
-            rd /s /q "ldm-old"
-        )
-
-        call pip uninstall -y sdkit stable-diffusion-sdkit
-    )
-)
-
 set PATH=C:\Windows\System32;%PATH%
 
-@>nul findstr /m "conda_sd_gfpgan_deps_installed" ..\scripts\install_status.txt
+@>nul grep -c "conda_sd_gfpgan_deps_installed" ..\scripts\install_status.txt
 @if "%ERRORLEVEL%" EQU "0" (
     @echo "Packages necessary for GFPGAN (Face Correction) were already installed"
 ) else (
@@ -124,12 +89,20 @@ set PATH=C:\Windows\System32;%PATH%
 
     @set PYTHONNOUSERSITE=1
 
-    set USERPROFILE=%cd%\profile
+    @call pip install -e git+https://github.com/TencentARC/GFPGAN#egg=GFPGAN || (
+        @echo. & echo "Error installing the packages necessary for GFPGAN (Face Correction). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        pause
+        exit /b
+    )
 
-    set PYTHONPATH=%cd%;%cd%\env\lib\site-packages
+    @call pip install basicsr==1.4.2 || (
+        @echo. & echo "Error installing the basicsr package necessary for GFPGAN (Face Correction). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        pause
+        exit /b
+    )
 
     for /f "tokens=*" %%a in ('python -c "from gfpgan import GFPGANer; print(42)"') do if "%%a" NEQ "42" (
-        @echo. & echo "Dependency test failed! Error installing the packages necessary for GFPGAN (Face Correction). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        @echo. & echo "Dependency test failed! Error installing the packages necessary for GFPGAN (Face Correction). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
         pause
         exit /b
     )
@@ -137,7 +110,7 @@ set PATH=C:\Windows\System32;%PATH%
     @echo conda_sd_gfpgan_deps_installed >> ..\scripts\install_status.txt
 )
 
-@>nul findstr /m "conda_sd_esrgan_deps_installed" ..\scripts\install_status.txt
+@>nul grep -c "conda_sd_esrgan_deps_installed" ..\scripts\install_status.txt
 @if "%ERRORLEVEL%" EQU "0" (
     @echo "Packages necessary for ESRGAN (Resolution Upscaling) were already installed"
 ) else (
@@ -145,12 +118,14 @@ set PATH=C:\Windows\System32;%PATH%
 
     @set PYTHONNOUSERSITE=1
 
-    set USERPROFILE=%cd%\profile
+    @call pip install -e git+https://github.com/xinntao/Real-ESRGAN#egg=realesrgan || (
-
+        @echo. & echo "Error installing the packages necessary for ESRGAN (Resolution Upscaling). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
-    set PYTHONPATH=%cd%;%cd%\env\lib\site-packages
+        pause
+        exit /b
+    )
 
     for /f "tokens=*" %%a in ('python -c "from basicsr.archs.rrdbnet_arch import RRDBNet; from realesrgan import RealESRGANer; print(42)"') do if "%%a" NEQ "42" (
-        @echo. & echo "Dependency test failed! Error installing the packages necessary for ESRGAN (Resolution Upscaling). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        @echo. & echo "Dependency test failed! Error installing the packages necessary for ESRGAN (Resolution Upscaling). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
         pause
         exit /b
     )
@@ -158,7 +133,7 @@ set PATH=C:\Windows\System32;%PATH%
     @echo conda_sd_esrgan_deps_installed >> ..\scripts\install_status.txt
 )
 
-@>nul findstr /m "conda_sd_ui_deps_installed" ..\scripts\install_status.txt
+@>nul grep -c "conda_sd_ui_deps_installed" ..\scripts\install_status.txt
 @if "%ERRORLEVEL%" EQU "0" (
     echo "Packages necessary for Stable Diffusion UI were already installed"
 ) else (
@@ -166,65 +141,28 @@ set PATH=C:\Windows\System32;%PATH%
 
     @set PYTHONNOUSERSITE=1
 
-    set USERPROFILE=%cd%\profile
-
-    set PYTHONPATH=%cd%;%cd%\env\lib\site-packages
-
     @call conda install -c conda-forge -y --prefix env uvicorn fastapi || (
-        echo "Error installing the packages necessary for Stable Diffusion UI. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!"
+        echo "Error installing the packages necessary for Stable Diffusion UI. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!"
         pause
         exit /b
     )
 )
 
 call WHERE uvicorn > .tmp
-@>nul findstr /m "uvicorn" .tmp
+@>nul grep -c "uvicorn" .tmp
 @if "%ERRORLEVEL%" NEQ "0" (
-    @echo. & echo "UI packages not found! Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+    @echo. & echo "UI packages not found! Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
     pause
     exit /b
 )
 
-@>nul 2>nul call python -m picklescan --help
+@>nul grep -c "conda_sd_ui_deps_installed" ..\scripts\install_status.txt
-@if "%ERRORLEVEL%" NEQ "0" (
-    @echo. & echo Picklescan not found. Installing
-    @call pip install picklescan || (
-        echo "Error installing the picklescan package necessary for Stable Diffusion UI. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!"
-        pause
-        exit /b
-    )
-)
-
-@>nul 2>nul call python -c "import safetensors"
-@if "%ERRORLEVEL%" NEQ "0" (
-    @echo. & echo SafeTensors not found. Installing
-    @call pip install safetensors || (
-        echo "Error installing the safetensors package necessary for Stable Diffusion UI. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!"
-        pause
-        exit /b
-    )
-)
-
-@>nul findstr /m "conda_sd_ui_deps_installed" ..\scripts\install_status.txt
 @if "%ERRORLEVEL%" NEQ "0" (
     @echo conda_sd_ui_deps_installed >> ..\scripts\install_status.txt
 )
 
 
 
-if not exist "..\models\stable-diffusion" mkdir "..\models\stable-diffusion"
-if not exist "..\models\vae" mkdir "..\models\vae"
-if not exist "..\models\hypernetwork" mkdir "..\models\hypernetwork"
-echo. > "..\models\stable-diffusion\Put your custom ckpt files here.txt"
-echo. > "..\models\vae\Put your VAE files here.txt"
-echo. > "..\models\hypernetwork\Put your hypernetwork files here.txt"
-
-@rem if downgrading from v2.5, migrate the models to the legacy path (if already downloaded)
-if exist "..\models\stable-diffusion\sd-v1-4.ckpt" if not exist "sd-v1-4.ckpt" move ..\models\stable-diffusion\sd-v1-4.ckpt .
-if exist "..\models\gfpgan\GFPGANv1.3.pth" if not exist "GFPGANv1.3.pth" move ..\models\gfpgan\GFPGANv1.3.pth .
-if exist "..\models\realesrgan\RealESRGAN_x4plus.pth" if not exist "RealESRGAN_x4plus.pth" move ..\models\realesrgan\RealESRGAN_x4plus.pth .
-if exist "..\models\realesrgan\RealESRGAN_x4plus_anime_6B.pth" if not exist "RealESRGAN_x4plus_anime_6B.pth" move ..\models\realesrgan\RealESRGAN_x4plus_anime_6B.pth .
-
 @if exist "sd-v1-4.ckpt" (
     for %%I in ("sd-v1-4.ckpt") do if "%%~zI" EQU "4265380512" (
         echo "Data files (weights) necessary for Stable Diffusion were already downloaded. Using the HuggingFace 4 GB Model."
@@ -250,12 +188,12 @@ if exist "..\models\realesrgan\RealESRGAN_x4plus_anime_6B.pth" if not exist "Rea
     @if exist "sd-v1-4.ckpt" (
         for %%I in ("sd-v1-4.ckpt") do if "%%~zI" NEQ "4265380512" (
             echo. & echo "Error: The downloaded model file was invalid! Bytes downloaded: %%~zI" & echo.
-            echo. & echo "Error downloading the data files (weights) for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+            echo. & echo "Error downloading the data files (weights) for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
             pause
             exit /b
         )
     ) else (
-        @echo. & echo "Error downloading the data files (weights) for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        @echo. & echo "Error downloading the data files (weights) for Stable Diffusion. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
         pause
         exit /b
     )
@@ -280,12 +218,12 @@ if exist "..\models\realesrgan\RealESRGAN_x4plus_anime_6B.pth" if not exist "Rea
     @if exist "GFPGANv1.3.pth" (
         for %%I in ("GFPGANv1.3.pth") do if "%%~zI" NEQ "348632874" (
             echo. & echo "Error: The downloaded GFPGAN model file was invalid! Bytes downloaded: %%~zI" & echo.
-            echo. & echo "Error downloading the data files (weights) for GFPGAN (Face Correction). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+            echo. & echo "Error downloading the data files (weights) for GFPGAN (Face Correction). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
             pause
             exit /b
         )
     ) else (
-        @echo. & echo "Error downloading the data files (weights) for GFPGAN (Face Correction). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        @echo. & echo "Error downloading the data files (weights) for GFPGAN (Face Correction). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
         pause
         exit /b
     )
@@ -297,7 +235,7 @@ if exist "..\models\realesrgan\RealESRGAN_x4plus_anime_6B.pth" if not exist "Rea
     for %%I in ("RealESRGAN_x4plus.pth") do if "%%~zI" EQU "67040989" (
         echo "Data files (weights) necessary for ESRGAN (Resolution Upscaling) x4plus were already downloaded"
     ) else (
-        echo. & echo "The RealESRGAN model file present at %cd%\RealESRGAN_x4plus.pth is invalid. It is only %%~zI bytes in size. Re-downloading.." & echo.
+        echo. & echo "The GFPGAN model file present at %cd%\RealESRGAN_x4plus.pth is invalid. It is only %%~zI bytes in size. Re-downloading.." & echo.
         del "RealESRGAN_x4plus.pth"
     )
 )
@@ -310,12 +248,12 @@ if exist "..\models\realesrgan\RealESRGAN_x4plus_anime_6B.pth" if not exist "Rea
     @if exist "RealESRGAN_x4plus.pth" (
         for %%I in ("RealESRGAN_x4plus.pth") do if "%%~zI" NEQ "67040989" (
             echo. & echo "Error: The downloaded ESRGAN x4plus model file was invalid! Bytes downloaded: %%~zI" & echo.
-            echo. & echo "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+            echo. & echo "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
             pause
             exit /b
         )
     ) else (
-        @echo. & echo "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        @echo. & echo "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
         pause
         exit /b
     )
@@ -327,7 +265,7 @@ if exist "..\models\realesrgan\RealESRGAN_x4plus_anime_6B.pth" if not exist "Rea
     for %%I in ("RealESRGAN_x4plus_anime_6B.pth") do if "%%~zI" EQU "17938799" (
         echo "Data files (weights) necessary for ESRGAN (Resolution Upscaling) x4plus_anime were already downloaded"
     ) else (
-        echo. & echo "The RealESRGAN model file present at %cd%\RealESRGAN_x4plus_anime_6B.pth is invalid. It is only %%~zI bytes in size. Re-downloading.." & echo.
+        echo. & echo "The GFPGAN model file present at %cd%\RealESRGAN_x4plus_anime_6B.pth is invalid. It is only %%~zI bytes in size. Re-downloading.." & echo.
         del "RealESRGAN_x4plus_anime_6B.pth"
     )
 )
@@ -340,12 +278,12 @@ if exist "..\models\realesrgan\RealESRGAN_x4plus_anime_6B.pth" if not exist "Rea
     @if exist "RealESRGAN_x4plus_anime_6B.pth" (
         for %%I in ("RealESRGAN_x4plus_anime_6B.pth") do if "%%~zI" NEQ "17938799" (
             echo. & echo "Error: The downloaded ESRGAN x4plus_anime model file was invalid! Bytes downloaded: %%~zI" & echo.
-            echo. & echo "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus_anime. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+            echo. & echo "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus_anime. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
             pause
             exit /b
         )
     ) else (
-        @echo. & echo "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus_anime. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
+        @echo. & echo "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus_anime. Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
         pause
         exit /b
     )
@@ -353,39 +291,7 @@ if exist "..\models\realesrgan\RealESRGAN_x4plus_anime_6B.pth" if not exist "Rea
 
 
 
-@if exist "..\models\vae\vae-ft-mse-840000-ema-pruned.ckpt" (
+@>nul grep -c "sd_install_complete" ..\scripts\install_status.txt
-    for %%I in ("..\models\vae\vae-ft-mse-840000-ema-pruned.ckpt") do if "%%~zI" EQU "334695179" (
-        echo "Data files (weights) necessary for the default VAE (sd-vae-ft-mse-original) were already downloaded"
-    ) else (
-        echo. & echo "The default VAE (sd-vae-ft-mse-original) file present at models\vae\vae-ft-mse-840000-ema-pruned.ckpt is invalid. It is only %%~zI bytes in size. Re-downloading.." & echo.
-        del "..\models\vae\vae-ft-mse-840000-ema-pruned.ckpt"
-    )
-)
-
-@if not exist "..\models\vae\vae-ft-mse-840000-ema-pruned.ckpt" (
-    @echo. & echo "Downloading data files (weights) for the default VAE (sd-vae-ft-mse-original).." & echo.
-
-    @call curl -L -k https://huggingface.co/stabilityai/sd-vae-ft-mse-original/resolve/main/vae-ft-mse-840000-ema-pruned.ckpt > ..\models\vae\vae-ft-mse-840000-ema-pruned.ckpt
-
-    @if exist "..\models\vae\vae-ft-mse-840000-ema-pruned.ckpt" (
-        for %%I in ("..\models\vae\vae-ft-mse-840000-ema-pruned.ckpt") do if "%%~zI" NEQ "334695179" (
-            echo. & echo "Error: The downloaded default VAE (sd-vae-ft-mse-original) file was invalid! Bytes downloaded: %%~zI" & echo.
-            echo. & echo "Error downloading the data files (weights) for the default VAE (sd-vae-ft-mse-original). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
-            pause
-            exit /b
-        )
-    ) else (
-        @echo. & echo "Error downloading the data files (weights) for the default VAE (sd-vae-ft-mse-original). Sorry about that, please try to:" & echo "  1. Run this installer again." & echo "  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting" & echo "  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB" & echo "  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues" & echo "Thanks!" & echo.
-        pause
-        exit /b
-    )
-)
-
-if "%test_sd2%" == "Y" (
-    @call pip install open_clip_torch==2.0.2
-)
-
-@>nul findstr /m "sd_install_complete" ..\scripts\install_status.txt
 @if "%ERRORLEVEL%" NEQ "0" (
     @echo sd_weights_downloaded >> ..\scripts\install_status.txt
     @echo sd_install_complete >> ..\scripts\install_status.txt
@@ -400,24 +306,12 @@ if "%test_sd2%" == "Y" (
 @cd ..\..\..
 @echo PYTHONPATH=%PYTHONPATH%
 
-call where python
-call python --version
-
 @cd ..
 @set SD_UI_PATH=%cd%\ui
 @cd stable-diffusion
 
-@rem
+@call python --version
-@rem Rewrite easy-install.pth. This fixes the installation if the user has relocated the SDUI installation
-@rem
->env\Lib\site-packages\easy-install.pth echo %cd%\src\taming-transformers
->>env\Lib\site-packages\easy-install.pth echo %cd%\src\clip
->>env\Lib\site-packages\easy-install.pth echo %cd%\src\gfpgan
->>env\Lib\site-packages\easy-install.pth echo %cd%\src\realesrgan
 
-@if NOT DEFINED SD_UI_BIND_PORT set SD_UI_BIND_PORT=9000
+@uvicorn server:app --app-dir "%SD_UI_PATH%" --port 9000 --host 0.0.0.0
-@if NOT DEFINED SD_UI_BIND_IP set SD_UI_BIND_IP=0.0.0.0
-@uvicorn server:app --app-dir "%SD_UI_PATH%" --port %SD_UI_BIND_PORT% --host %SD_UI_BIND_IP%
 
-
+@pause
-@pause

scripts/on_sd_start.sh

@@ -1,58 +1,43 @@
 #!/bin/bash
 
-source ./scripts/functions.sh
-
 cp sd-ui-files/scripts/on_env_start.sh scripts/
-cp sd-ui-files/scripts/bootstrap.sh scripts/
 
-# activate the installer env
+source installer/etc/profile.d/conda.sh
-CONDA_BASEPATH=$(conda info --base)
-source "$CONDA_BASEPATH/etc/profile.d/conda.sh" # avoids the 'shell not initialized' error
 
-conda activate || fail "Failed to activate conda"
+python -c "import os; import shutil; frm = 'sd-ui-files/ui/hotfix/9c24e6cd9f499d02c4f21a033736dabd365962dc80fe3aeb57a8f85ea45a20a3.26fead7ea4f0f843f6eb4055dfd25693f1a71f3c6871b184042d4b126244e142'; dst = os.path.join(os.path.expanduser('~'), '.cache', 'huggingface', 'transformers', '9c24e6cd9f499d02c4f21a033736dabd365962dc80fe3aeb57a8f85ea45a20a3.26fead7ea4f0f843f6eb4055dfd25693f1a71f3c6871b184042d4b126244e142'); shutil.copyfile(frm, dst) if os.path.exists(dst) else print(''); print('Hotfixed broken JSON file from OpenAI');"
-
-# remove the old version of the dev console script, if it's still present
-if [ -e "open_dev_console.sh" ]; then
-    rm "open_dev_console.sh"
-fi
-
-python -c "import os; import shutil; frm = 'sd-ui-files/ui/hotfix/9c24e6cd9f499d02c4f21a033736dabd365962dc80fe3aeb57a8f85ea45a20a3.26fead7ea4f0f843f6eb4055dfd25693f1a71f3c6871b184042d4b126244e142'; dst = os.path.join(os.path.expanduser('~'), '.cache', 'huggingface', 'transformers', '9c24e6cd9f499d02c4f21a033736dabd365962dc80fe3aeb57a8f85ea45a20a3.26fead7ea4f0f843f6eb4055dfd25693f1a71f3c6871b184042d4b126244e142'); shutil.copyfile(frm, dst) if os.path.exists(dst) else print(''); print('Hotfixed broken JSON file from OpenAI');" 
 
 # Caution, this file will make your eyes and brain bleed. It's such an unholy mess.
 # Note to self: Please rewrite this in Python. For the sake of your own sanity.
 
-if [ "$test_sd2" == "" ]; then
-    export test_sd2="N"
-fi
-
 if [ -e "scripts/install_status.txt" ] && [ `grep -c sd_git_cloned scripts/install_status.txt` -gt "0" ]; then
     echo "Stable Diffusion's git repository was already installed. Updating.."
 
     cd stable-diffusion
 
-    git remote set-url origin https://github.com/easydiffusion/diffusion-kit.git
-
     git reset --hard
     git pull
+    git checkout f6cfebffa752ee11a7b07497b8529d5971de916c
 
-    if [ "$test_sd2" == "N" ]; then
+    git apply ../ui/sd_internal/ddim_callback.patch
-        git -c advice.detachedHead=false checkout 7f32368ed1030a6e710537047bacd908adea183a
+    git apply ../ui/sd_internal/env_yaml.patch
-    elif [ "$test_sd2" == "Y" ]; then
-        git -c advice.detachedHead=false checkout 733a1f6f9cae9b9a9b83294bf3281b123378cb1f
-    fi
 
     cd ..
 else
     printf "\n\nDownloading Stable Diffusion..\n\n"
 
-    if git clone https://github.com/easydiffusion/diffusion-kit.git stable-diffusion ; then
+    if git clone https://github.com/basujindal/stable-diffusion.git ; then
         echo sd_git_cloned >> scripts/install_status.txt
     else
-        fail "git clone of basujindal/stable-diffusion.git failed"
+        printf "\n\nError downloading Stable Diffusion. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 
     cd stable-diffusion
-    git -c advice.detachedHead=false checkout 7f32368ed1030a6e710537047bacd908adea183a
+    git checkout f6cfebffa752ee11a7b07497b8529d5971de916c
+
+    git apply ../ui/sd_internal/ddim_callback.patch
+    git apply ../ui/sd_internal/env_yaml.patch
 
     cd ..
 fi
@@ -62,54 +47,62 @@ cd stable-diffusion
 if [ `grep -c conda_sd_env_created ../scripts/install_status.txt` -gt "0" ]; then
     echo "Packages necessary for Stable Diffusion were already installed"
 
-    conda activate ./env || fail "conda activate failed"
+    conda activate ./env
 else
     printf "\n\nDownloading packages necessary for Stable Diffusion..\n"
     printf "\n\n***** This will take some time (depending on the speed of the Internet connection) and may appear to be stuck, but please be patient ***** ..\n\n"
 
     # prevent conda from using packages from the user's home directory, to avoid conflicts
     export PYTHONNOUSERSITE=1
-    export PYTHONPATH="$(pwd):$(pwd)/env/lib/site-packages"
 
     if conda env create --prefix env --force -f environment.yaml ; then
         echo "Installed. Testing.."
     else
-        fail "'conda env create' failed"
+        printf "\n\nError installing the packages necessary for Stable Diffusion. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 
-    conda activate ./env || fail "conda activate failed"
+    conda activate ./env
+
+    if conda install -c conda-forge --prefix ./env -y antlr4-python3-runtime=4.8 ; then
+        echo "Installed. Testing.."
+    else
+        printf "\n\nError installing antlr4-python3-runtime for Stable Diffusion. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
+    fi
 
     out_test=`python -c "import torch; import ldm; import transformers; import numpy; import antlr4; print(42)"`
     if [ "$out_test" != "42" ]; then
-        fail "Dependency test failed"
+        printf "\n\nDependency test failed! Error installing the packages necessary for Stable Diffusion. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 
     echo conda_sd_env_created >> ../scripts/install_status.txt
 fi
 
-# allow rolling back the sdkit-based changes
-if [ -e "src-old" ] && [ ! -e "src" ]; then
-    mv src-old src
-
-    if [ -e "ldm-old" ]; then rm -r ldm-old; fi
-
-    pip uninstall -y sdkit stable-diffusion-sdkit
-fi
-
 if [ `grep -c conda_sd_gfpgan_deps_installed ../scripts/install_status.txt` -gt "0" ]; then
     echo "Packages necessary for GFPGAN (Face Correction) were already installed"
 else
     printf "\n\nDownloading packages necessary for GFPGAN (Face Correction)..\n"
 
     export PYTHONNOUSERSITE=1
-    export PYTHONPATH="$(pwd):$(pwd)/env/lib/site-packages"
+
+    if pip install -e git+https://github.com/TencentARC/GFPGAN#egg=GFPGAN ; then
+        echo "Installed. Testing.."
+    else
+        printf "\n\nError installing the packages necessary for GFPGAN (Face Correction). Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
+    fi
 
     out_test=`python -c "from gfpgan import GFPGANer; print(42)"`
     if [ "$out_test" != "42" ]; then
-        echo "EE The dependency check has failed. This usually means that some system libraries are missing."
+        printf "\n\nDependency test failed! Error installing the packages necessary for GFPGAN (Face Correction). Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
-	echo "EE On Debian/Ubuntu systems, this are often these packages: libsm6 libxext6 libxrender-dev"
+        read -p "Press any key to continue"
-	echo "EE Other Linux distributions might have different package names for these libraries."
+        exit
-        fail "GFPGAN dependency test failed"
     fi
 
     echo conda_sd_gfpgan_deps_installed >> ../scripts/install_status.txt
@@ -121,11 +114,20 @@ else
     printf "\n\nDownloading packages necessary for ESRGAN (Resolution Upscaling)..\n"
 
     export PYTHONNOUSERSITE=1
-    export PYTHONPATH="$(pwd):$(pwd)/env/lib/site-packages"
+
+    if pip install -e git+https://github.com/xinntao/Real-ESRGAN#egg=realesrgan ; then
+        echo "Installed. Testing.."
+    else
+        printf "\n\nError installing the packages necessary for ESRGAN (Resolution Upscaling). Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
+    fi
 
     out_test=`python -c "from basicsr.archs.rrdbnet_arch import RRDBNet; from realesrgan import RealESRGANer; print(42)"`
     if [ "$out_test" != "42" ]; then
-        fail "ESRGAN dependency test failed"
+        printf "\n\nDependency test failed! Error installing the packages necessary for ESRGAN (Resolution Upscaling). Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 
     echo conda_sd_esrgan_deps_installed >> ../scripts/install_status.txt
@@ -137,52 +139,28 @@ else
     printf "\n\nDownloading packages necessary for Stable Diffusion UI..\n\n"
 
     export PYTHONNOUSERSITE=1
-    export PYTHONPATH="$(pwd):$(pwd)/env/lib/site-packages"
 
     if conda install -c conda-forge --prefix ./env -y uvicorn fastapi ; then
         echo "Installed. Testing.."
     else
-        fail "'conda install uvicorn' failed" 
+        printf "\n\nError installing the packages necessary for Stable Diffusion UI. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 
     if ! command -v uvicorn &> /dev/null; then
-        fail "UI packages not found!"
+        printf "\n\nUI packages not found! Error installing the packages necessary for Stable Diffusion UI. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 
     echo conda_sd_ui_deps_installed >> ../scripts/install_status.txt
 fi
 
-if python -m picklescan --help >/dev/null 2>&1; then
-    echo "Picklescan is already installed."
-else
-    echo "Picklescan not found, installing."
-    pip install picklescan || fail "Picklescan installation failed."
-fi
 
-if python -c "import safetensors" --help >/dev/null 2>&1; then
-    echo "SafeTensors is already installed."
-else
-    echo "SafeTensors not found, installing."
-    pip install safetensors || fail "SafeTensors installation failed."
-fi
-
-
-
-mkdir -p "../models/stable-diffusion"
-mkdir -p "../models/vae"
-mkdir -p "../models/hypernetwork"
-echo "" > "../models/stable-diffusion/Put your custom ckpt files here.txt"
-echo "" > "../models/vae/Put your VAE files here.txt"
-echo "" > "../models/hypernetwork/Put your hypernetwork files here.txt"
-
-# if downgrading from v2.5, migrate the models to the legacy path (if already downloaded)
-if [ -e "../models/stable-diffusion/sd-v1-4.ckpt" ] && [ ! -e "sd-v1-4.ckpt" ]; then mv ../models/stable-diffusion/sd-v1-4.ckpt . ; fi
-if [ -e "../models/gfpgan/GFPGANv1.3.pth" ] && [ ! -e "GFPGANv1.3.pth" ]; then mv ../models/gfpgan/GFPGANv1.3.pth . ; fi
-if [ -e "../models/realesrgan/RealESRGAN_x4plus.pth" ] && [ ! -e "RealESRGAN_x4plus.pth" ]; then mv ../models/realesrgan/RealESRGAN_x4plus.pth . ; fi
-if [ -e "../models/realesrgan/RealESRGAN_x4plus_anime_6B.pth" ] && [ ! -e "RealESRGAN_x4plus_anime_6B.pth" ]; then mv ../models/realesrgan/RealESRGAN_x4plus_anime_6B.pth . ; fi
 
 if [ -f "sd-v1-4.ckpt" ]; then
-    model_size=`find "sd-v1-4.ckpt" -printf "%s"`
+    model_size=`ls -l sd-v1-4.ckpt | awk '{print $5}'`
 
     if [ "$model_size" -eq "4265380512" ] || [ "$model_size" -eq "7703807346" ] || [ "$model_size" -eq "7703810927" ]; then
         echo "Data files (weights) necessary for Stable Diffusion were already downloaded"
@@ -198,18 +176,23 @@ if [ ! -f "sd-v1-4.ckpt" ]; then
     curl -L -k https://me.cmdr2.org/stable-diffusion-ui/sd-v1-4.ckpt > sd-v1-4.ckpt
 
     if [ -f "sd-v1-4.ckpt" ]; then
-        model_size=`find "sd-v1-4.ckpt" -printf "%s"`
+        model_size=`ls -l sd-v1-4.ckpt | awk '{print $5}'`
         if [ ! "$model_size" == "4265380512" ]; then
-	    fail "The downloaded model file was invalid! Bytes downloaded: $model_size"
+            printf "\n\nError: The downloaded model file was invalid! Bytes downloaded: $model_size\n\n"
+            printf "\n\nError downloading the data files (weights) for Stable Diffusion. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+            read -p "Press any key to continue"
+            exit
         fi
     else
-        fail "Error downloading the data files (weights) for Stable Diffusion"
+        printf "\n\nError downloading the data files (weights) for Stable Diffusion. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 fi
 
 
 if [ -f "GFPGANv1.3.pth" ]; then
-    model_size=`find "GFPGANv1.3.pth" -printf "%s"`
+    model_size=`ls -l GFPGANv1.3.pth | awk '{print $5}'`
 
     if [ "$model_size" -eq "348632874" ]; then
         echo "Data files (weights) necessary for GFPGAN (Face Correction) were already downloaded"
@@ -225,18 +208,23 @@ if [ ! -f "GFPGANv1.3.pth" ]; then
     curl -L -k https://github.com/TencentARC/GFPGAN/releases/download/v1.3.0/GFPGANv1.3.pth > GFPGANv1.3.pth
 
     if [ -f "GFPGANv1.3.pth" ]; then
-        model_size=`find "GFPGANv1.3.pth" -printf "%s"`
+        model_size=`ls -l GFPGANv1.3.pth | awk '{print $5}'`
         if [ ! "$model_size" -eq "348632874" ]; then
-            fail "The downloaded GFPGAN model file was invalid! Bytes downloaded: $model_size"
+            printf "\n\nError: The downloaded GFPGAN model file was invalid! Bytes downloaded: $model_size\n\n"
+            printf "\n\nError downloading the data files (weights) for GFPGAN (Face Correction). Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+            read -p "Press any key to continue"
+            exit
         fi
     else
-        fail "Error downloading the data files (weights) for GFPGAN (Face Correction)."
+        printf "\n\nError downloading the data files (weights) for GFPGAN (Face Correction). Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 fi
 
 
 if [ -f "RealESRGAN_x4plus.pth" ]; then
-    model_size=`find "RealESRGAN_x4plus.pth" -printf "%s"`
+    model_size=`ls -l RealESRGAN_x4plus.pth | awk '{print $5}'`
 
     if [ "$model_size" -eq "67040989" ]; then
         echo "Data files (weights) necessary for ESRGAN (Resolution Upscaling) x4plus were already downloaded"
@@ -252,18 +240,23 @@ if [ ! -f "RealESRGAN_x4plus.pth" ]; then
     curl -L -k https://github.com/xinntao/Real-ESRGAN/releases/download/v0.1.0/RealESRGAN_x4plus.pth > RealESRGAN_x4plus.pth
 
     if [ -f "RealESRGAN_x4plus.pth" ]; then
-        model_size=`find "RealESRGAN_x4plus.pth" -printf "%s"`
+        model_size=`ls -l RealESRGAN_x4plus.pth | awk '{print $5}'`
         if [ ! "$model_size" -eq "67040989" ]; then
-            fail "The downloaded ESRGAN x4plus model file was invalid! Bytes downloaded: $model_size"
+            printf "\n\nError: The downloaded ESRGAN x4plus model file was invalid! Bytes downloaded: $model_size\n\n"
+            printf "\n\nError downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+            read -p "Press any key to continue"
+            exit
         fi
     else
-        fail "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus"
+        printf "\n\nError downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        read -p "Press any key to continue"
+        exit
     fi
 fi
 
 
 if [ -f "RealESRGAN_x4plus_anime_6B.pth" ]; then
-    model_size=`find "RealESRGAN_x4plus_anime_6B.pth" -printf "%s"`
+    model_size=`ls -l RealESRGAN_x4plus_anime_6B.pth | awk '{print $5}'`
 
     if [ "$model_size" -eq "17938799" ]; then
         echo "Data files (weights) necessary for ESRGAN (Resolution Upscaling) x4plus_anime were already downloaded"
@@ -279,50 +272,20 @@ if [ ! -f "RealESRGAN_x4plus_anime_6B.pth" ]; then
     curl -L -k https://github.com/xinntao/Real-ESRGAN/releases/download/v0.2.2.4/RealESRGAN_x4plus_anime_6B.pth > RealESRGAN_x4plus_anime_6B.pth
 
     if [ -f "RealESRGAN_x4plus_anime_6B.pth" ]; then
-        model_size=`find "RealESRGAN_x4plus_anime_6B.pth" -printf "%s"`
+        model_size=`ls -l RealESRGAN_x4plus_anime_6B.pth | awk '{print $5}'`
         if [ ! "$model_size" -eq "17938799" ]; then
-            fail "The downloaded ESRGAN x4plus_anime model file was invalid! Bytes downloaded: $model_size"
+            printf "\n\nError: The downloaded ESRGAN x4plus_anime model file was invalid! Bytes downloaded: $model_size\n\n"
-        fi
+            printf "\n\nError downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus_anime. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
-    else
-        fail "Error downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus_anime."
-    fi
-fi
-
-
-if [ -f "../models/vae/vae-ft-mse-840000-ema-pruned.ckpt" ]; then
-    model_size=`find ../models/vae/vae-ft-mse-840000-ema-pruned.ckpt -printf "%s"`
-
-    if [ "$model_size" -eq "334695179" ]; then
-        echo "Data files (weights) necessary for the default VAE (sd-vae-ft-mse-original) were already downloaded"
-    else
-        printf "\n\nThe model file present at models/vae/vae-ft-mse-840000-ema-pruned.ckpt is invalid. It is only $model_size bytes in size. Re-downloading.."
-        rm ../models/vae/vae-ft-mse-840000-ema-pruned.ckpt
-    fi
-fi
-
-if [ ! -f "../models/vae/vae-ft-mse-840000-ema-pruned.ckpt" ]; then
-    echo "Downloading data files (weights) for the default VAE (sd-vae-ft-mse-original).."
-
-    curl -L -k https://huggingface.co/stabilityai/sd-vae-ft-mse-original/resolve/main/vae-ft-mse-840000-ema-pruned.ckpt > ../models/vae/vae-ft-mse-840000-ema-pruned.ckpt
-
-    if [ -f "../models/vae/vae-ft-mse-840000-ema-pruned.ckpt" ]; then
-        model_size=`find ../models/vae/vae-ft-mse-840000-ema-pruned.ckpt -printf "%s"`
-        if [ ! "$model_size" -eq "334695179" ]; then
-            printf "\n\nError: The downloaded default VAE (sd-vae-ft-mse-original) file was invalid! Bytes downloaded: $model_size\n\n"
-            printf "\n\nError downloading the data files (weights) for the default VAE (sd-vae-ft-mse-original). Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
             read -p "Press any key to continue"
             exit
         fi
     else
-        printf "\n\nError downloading the data files (weights) for the default VAE (sd-vae-ft-mse-original). Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/wiki/Troubleshooting\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
+        printf "\n\nError downloading the data files (weights) for ESRGAN (Resolution Upscaling) x4plus_anime. Sorry about that, please try to:\n  1. Run this installer again.\n  2. If that doesn't fix it, please try the common troubleshooting steps at https://github.com/cmdr2/stable-diffusion-ui/blob/main/Troubleshooting.md\n  3. If those steps don't help, please copy *all* the error messages in this window, and ask the community at https://discord.com/invite/u9yhsFmEkB\n  4. If that doesn't solve the problem, please file an issue at https://github.com/cmdr2/stable-diffusion-ui/issues\nThanks!\n\n"
         read -p "Press any key to continue"
         exit
     fi
 fi
 
-if [ "$test_sd2" == "Y" ]; then
-    pip install open_clip_torch==2.0.2
-fi
 
 if [ `grep -c sd_install_complete ../scripts/install_status.txt` -gt "0" ]; then
     echo sd_weights_downloaded >> ../scripts/install_status.txt
@@ -332,16 +295,15 @@ fi
 printf "\n\nStable Diffusion is ready!\n\n"
 
 SD_PATH=`pwd`
-export PYTHONPATH="$SD_PATH:$SD_PATH/env/lib/python3.8/site-packages"
+export PYTHONPATH="$SD_PATH;$SD_PATH/env/lib/python3.8/site-packages"
 echo "PYTHONPATH=$PYTHONPATH"
 
-which python
-python --version
-
 cd ..
 export SD_UI_PATH=`pwd`/ui
 cd stable-diffusion
 
-uvicorn server:app --app-dir "$SD_UI_PATH" --port ${SD_UI_BIND_PORT:-9000} --host ${SD_UI_BIND_IP:-0.0.0.0}
+python --version
+
+uvicorn server:app --app-dir "$SD_UI_PATH" --port 9000 --host 0.0.0.0
 
 read -p "Press any key to continue"

scripts/post_activate.bat

@@ -0,0 +1,6 @@
+@call conda --version
+@call git --version
+
+cd %CONDA_PREFIX%\..\scripts
+
+on_env_start.bat

scripts/post_activate.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+conda-unpack
+
+source $CONDA_PREFIX/etc/profile.d/conda.sh
+
+conda --version
+git --version
+
+cd $CONDA_PREFIX/../scripts
+
+./on_env_start.sh

scripts/start.sh

@@ -1,22 +1,10 @@
 #!/bin/bash
 
-cd "$(dirname "${BASH_SOURCE[0]}")"
+source installer/bin/activate
 
-# set legacy installer's PATH, if it exists
+conda-unpack
-if [ -e "installer" ]; then export PATH="$(pwd)/installer/bin:$PATH"; fi
 
-# Setup the packages required for the installer
+conda --version
-scripts/bootstrap.sh || exit 1
+git --version
 
-# set new installer's PATH, if it downloaded any packages
-if [ -e "installer_files/env" ]; then export PATH="$(pwd)/installer_files/env/bin:$PATH"; fi
-
-# Test the bootstrap
-which git
-git --version || exit 1
-
-which conda
-conda --version || exit 1
-
-# Download the rest of the installer and UI
 scripts/on_env_start.sh