# Description
This adds back support for parens around params, eg `def foo (x: int) {
... }`
# User-Facing Changes
returns to the original support before the recent parser refactor
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
https://github.com/nushell/nushell/pull/8379 removed the `-i` flag from
`get` and `select` because the new `?` functionality covers most of the
same use cases. However, https://github.com/nushell/nushell/issues/8480
made me realize that `-i` is still useful when dealing with cell paths
in variables.
This PR re-adds the `-i` flag to `get` and `select`. It works by just
marking every member in the cell path as optional, which will behave
_slightly_ differently than `-i` used to (previously it would suppress
any errors, even type errors) but IMO that's OK.
# Description
Was original asked here:
https://github.com/nushell/nushell/pull/8405#issuecomment-1465062652
Make it easier to extend standard library with submodules.
(For a new submodule called `xx.nu` the tests can be written in
`test_xx.nu`).
Test discovery is implemented.
# User-Facing Changes
There are no user-facing changes.
# Tests + Formatting
Tests are updated.
There is no `nufmt` now.
---------
Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
This reverts commit dec0a2517f.
It breaks programs like `fzf`
# Description
Fixes: #8472
Fixes: #8313Reopen: #7690
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes the issue where there is no way to escape `FOO=BAR` in a way that
treats it as a file path/executable name. Previously `^FOO=BAR` would be
handled as an environment shorthand. Now, environment shorthands are not
allowed to start with `^`. To create an environment shorthand value that
uses `^` as the first character of the environment variable name, use
quotes, eg `"^FOO"=BAR`
# User-Facing Changes
This should enable `=` being in paths and external command names in
command position.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds a fix for reading tag values from YAML file.
A tag in YAML file is denoted by using the exclamation point ("!")
symbol.
For example - Key: !Value
Additional passing test has also been added supporting the bug fix -
- `test_convert_yaml_value_to_nu_value_for_tagged_values`
The fix passes all the below required tests suites locally -
>To check standard code formatting.
- `cargo fmt --all -- --check` (`cargo fmt --all` applies these changes)
>To check that you're using the standard code style.
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect`
>To check that all tests pass
- `cargo test --workspace`
---------
Co-authored-by: Nitin Londhe <nitin.londhe@genmills.com>
Bumps [mockito](https://github.com/lipanski/mockito) from 0.32.5 to
1.0.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lipanski/mockito/releases">mockito's
releases</a>.</em></p>
<blockquote>
<h2>1.0.0</h2>
<p>🎈 7 years and 63 releases later, it's finally time for the
1.0 🎈</p>
<h2>Changes</h2>
<ul>
<li><strong>[Breaking]</strong> The legacy interface was removed in this
version</li>
<li><strong>[Breaking]</strong> <code>Mock::with_body_from_fn</code> was
renamed to <code>Mock::with_chunked_body</code> - the former is still
supported with a deprecation warning</li>
<li>Mocks are only cleared when the server is dropped, not when the mock
is dropped - this means you <strong>don't have to assign mocks to
variables any more</strong> (unless you want to call other methods on
them)</li>
<li>Introduced the <code>Mock::remove</code> and
<code>Mock::remove_async</code> methods to remove mocks on demand</li>
</ul>
<h2>Major changes since 0.31</h2>
<ul>
<li>Tests can now run in parallel</li>
<li>Support for HTTP2</li>
<li>An async interface for all actions (though the sync interface is
also available)</li>
<li>Mock multiple server/hosts at the same time</li>
</ul>
<p>For a list of all the changes please check the <a
href="https://github.com/lipanski/mockito/releases">release log</a>.</p>
<h2>Migrating to the new API</h2>
<p>Legacy API:</p>
<pre lang="rust"><code>let m1 = mockito::mock("GET",
"/hello").with_body("hello").create();
let m2 = mockito::mock("GET",
"/bye").with_body("bye").create();
<p>// Use one of these to configure your client
let host = mockito:server_address();
let url = mockito::server_url();
</code></pre></p>
<p>New API:</p>
<pre lang="rust"><code>let mut server = mockito::Server::new();
server.mock("GET",
"/hello").with_body("hello").create();
server.mock("GET",
"/bye").with_body("bye").create();
<p>// Use one of these to configure your client
let host = server.host_with_port();
let url = server.url();
</code></pre></p>
<blockquote>
<p>If you can't migrate to the new API in one go, consider using version
0.32.5, which supports both the legacy API as well as the new API.</p>
</blockquote>
<h2>Migrating to the async API</h2>
<p>In order to write async tests, you'll need to use the
<code>_async</code> methods:</p>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="9a07811955"><code>9a07811</code></a>
Bump to 1.0.0</li>
<li><a
href="000c435f0e"><code>000c435</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/165">#165</a>
from lipanski/one-zero</li>
<li><a
href="68c56290a1"><code>68c5629</code></a>
Remove mocks when the server is dropped, not when the mock is
dropped</li>
<li><a
href="ac9042d022"><code>ac9042d</code></a>
Add the Windows line-ending fix to the test runner</li>
<li><a
href="0ce9788e00"><code>0ce9788</code></a>
Disable color tests on Windows</li>
<li><a
href="ad2ebcbaab"><code>ad2ebcb</code></a>
Fine-tuning the Windows test runner</li>
<li><a
href="abb9e91d71"><code>abb9e91</code></a>
Run Windows tests on Github Actions</li>
<li><a
href="5a7c96eaec"><code>5a7c96e</code></a>
Rename Mock::with_body_from_fn to Mock::with_chunked_body</li>
<li><a
href="ed338faedf"><code>ed338fa</code></a>
Uncomment threads tests</li>
<li><a
href="6e2064de95"><code>6e2064d</code></a>
Drop legacy interface</li>
<li>Additional commits viewable in <a
href="https://github.com/lipanski/mockito/compare/0.32.5...1.0.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Fixes: #8402#8391
The cause of these issue if when we want to evaluate a expression with
`Value::Error`, nushell show error immediately. To fix the issue, we can
wrap the `Value::Error` into a `Value::Record`. So user can see the
message he want.
# User-Facing Changes
Before
```
❯ try { 1 / 0 } catch {|e| echo $"error is ($e)"}
Error: nu:🐚:division_by_zero
× Division by zero.
╭─[entry #2:1:1]
1 │ try { 1 / 0 } catch {|e| echo $"error is ($e)"}
· ┬
· ╰── division by zero
╰────
```
After
```
❯ try { 1 / 0 } catch {|e| echo $"error is ($e)"}
error is {msg: Division by zero., debug: DivisionByZero { span: Span { start: 43104, end: 43105 } }, raw: DivisionByZero { sp
an: Span { start: 43104, end: 43105 } }}
```
As we can see, error becomes a record with `msg`, `debug`, `raw`
columns.
1. msg column is a user friendly message.
2. debug column is more about `Value::Error` information as a string.
3. raw column is a `Value::Error` itself, if user want to re-raise the
error, just use `$e | get raw`
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is a follow up from https://github.com/nushell/nushell/pull/7540.
Please provide feedback if you have the time!
## Summary
This PR lets you use `?` to indicate that a member in a cell path is
optional and Nushell should return `null` if that member cannot be
accessed.
Unlike the previous PR, `?` is now a _postfix_ modifier for cell path
members. A cell path of `.foo?.bar` means that `foo` is optional and
`bar` is not.
`?` does _not_ suppress all errors; it is intended to help in situations
where data has "holes", i.e. the data types are correct but something is
missing. Type mismatches (like trying to do a string path access on a
date) will still fail.
### Record Examples
```bash
{ foo: 123 }.foo # returns 123
{ foo: 123 }.bar # errors
{ foo: 123 }.bar? # returns null
{ foo: 123 } | get bar # errors
{ foo: 123 } | get bar? # returns null
{ foo: 123 }.bar.baz # errors
{ foo: 123 }.bar?.baz # errors because `baz` is not present on the result from `bar?`
{ foo: 123 }.bar.baz? # errors
{ foo: 123 }.bar?.baz? # returns null
```
### List Examples
```
〉[{foo: 1} {foo: 2} {}].foo
Error: nu:🐚:column_not_found
× Cannot find column
╭─[entry #30:1:1]
1 │ [{foo: 1} {foo: 2} {}].foo
· ─┬ ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
〉[{foo: 1} {foo: 2} {}].foo?
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ │
╰───┴───╯
〉[{foo: 1} {foo: 2} {}].foo?.2 | describe
nothing
〉[a b c].4? | describe
nothing
〉[{foo: 1} {foo: 2} {}] | where foo? == 1
╭───┬─────╮
│ # │ foo │
├───┼─────┤
│ 0 │ 1 │
╰───┴─────╯
```
# Breaking changes
1. Column names with `?` in them now need to be quoted.
2. The `-i`/`--ignore-errors` flag has been removed from `get` and
`select`
1. After this PR, most `get` error handling can be done with `?` and/or
`try`/`catch`.
4. Cell path accesses like this no longer work without a `?`:
```bash
〉[{a:1 b:2} {a:3}].b.0
2
```
We had some clever code that was able to recognize that since we only
want row `0`, it's OK if other rows are missing column `b`. I removed
that because it's tricky to maintain, and now that query needs to be
written like:
```bash
〉[{a:1 b:2} {a:3}].b?.0
2
```
I think the regression is acceptable for now. I plan to do more work in
the future to enable streaming of cell path accesses, and when that
happens I'll be able to make `.b.0` work again.
Should close#8444.
# Description
as asked by @presidento, i've used a generic command to run the tests.
i've also transformed the "a concrete example" sections into quote
blocks to make them stand out less.
not sure about that one, please tell me what you think 😋
i think a small example is always helpfull, maybe some work has to be
done to make it better 💪
# User-Facing Changes
hopefully a slightly clearer README for the standard library
# Tests + Formatting
```
$nothing
```
# After Submitting
```
$nothing
```
# Description
I found this when I was checking out my commits. It must have happened
during one of the random test failures that I've been getting quite
often recently.
# User-Facing Changes
None?
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This starts working on refactoring the parser to no longer use
SyntaxShape when making parsing decisions about values. This PR covers
grouping a few of the steps in `parse_value` to key off the first
character for what group of parsing steps it should use.
# User-Facing Changes
Hopefully none.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
`help externs` - command, which list external commands
Closes https://github.com/nushell/nushell/issues/8301
# User-Facing Changes
```nu
$ help externs
╭───┬──────────────┬─────────────┬───────────────────────────────────────────────────╮
│ # │ name │ module_name │ usage │
├───┼──────────────┼─────────────┼───────────────────────────────────────────────────┤
│ 0 │ git push │ completions │ Push changes │
│ │ │ │ │
│ 1 │ git fetch │ completions │ Download objects and refs from another repository │
│ │ │ │ │
│ 2 │ git checkout │ completions │ Check out git branches and files │
│ │ │ │ │
╰───┴──────────────┴─────────────┴───────────────────────────────────────────────────╯
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
It is a common pattern to add message to assert.
Also the error message was not so helpful. (See the difference in the
documentation)
---------
Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
# Description
This fixes up some clippy warnings and removes some old names/info from
our unit tests
# User-Facing Changes
Internal changes only
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Prior to this PR, `ls` would return `nothing` in an empty directory.
After this PR, it returns an empty `List`. This makes the behaviour of
`ls` more consistent and easier to reason about (IMO).
This was prompted by a user noticing that `ls | where size == 0KB and
type == file` breaks when run in an empty directory:
```
× Input type not supported.
╭─[entry #12:1:1]
1 │ ls | where size == 0KB and type == file
· ─┬ ──┬──
· │ ╰── only list, binary, raw data or range input data is supported
· ╰── input type: nothing
╰────
```
If people agree with this change, let's wait until after the 0.77
release so we have a bit more time to test it.
# Description
The correction made here concerns the issue #8431. Indeed, the algorithm
initially proposed to remove elements of a `vector` performed a loop
with `remove` and an incident therefore appeared when several values
were equal because the deletion was done outside the length of the
vector:
```rust
let mut found = false;
for (i, col) in cols.clone().iter().enumerate() {
if col == col_name {
cols.remove(i);
vals.remove(i);
found = true;
}
}
```
Then, `[[a, a]; [1, 2]] | reject a: ` gave `thread 'main' panicked at
'removal index (is 1) should be < len (is 1)',
crates/nu-protocol/src/value/mod.rs:1213:54`.
The proposed correction is therefore the implementation of the
`retain_mut` utility dedicated to this functionality.
```rust
let mut found = false;
let mut index = 0;
cols.retain_mut(|col| {
if col == col_name {
found = true;
vals.remove(index);
false
} else {
index += 1;
true
}
});
```
# Description
The "CREATE TABLE" statement in `into sqlite` does not add quotes to the
column names, reproduction steps are below:
```
/home/xxx〉[[name,y/n];[a,y]] | into sqlite test.db
Error:
× Failed to prepare SQLite statement
╭─[entry #1:1:1]
1 │ [[name,y/n];[a,y]] | into sqlite test.db
· ───┬───
· ╰── near "/": syntax error in CREATE TABLE IF NOT EXISTS main (name TEXT,y/n TEXT) at offset 44
╰────
```
# User-Facing Changes
None
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
Prevents alias from aliasing itself. It allows a commonly requested
pattern similar to `alias ls = ls -l`.
One small issue is that the syntax highlighting is a bit off:
Fixes https://github.com/nushell/nushell/issues/8246
# User-Facing Changes
Shouldn't be a breaking change.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Our `ShellError` at the moment has a `std::mem::size_of<ShellError>` of
136 bytes (on AMD64). As a result `Value` directly storing the struct
also required 136 bytes (thanks to alignment requirements).
This change stores the `Value::Error` `ShellError` on the heap.
Pro:
- Value now needs just 80 bytes
- Should be 1 cacheline less (still at least 2 cachelines)
Con:
- More small heap allocations when dealing with `Value::Error`
- More heap fragmentation
- Potential for additional required memcopies
# Further code changes
Includes a small refactor of `try` due to a type mismatch in its large
match.
# User-Facing Changes
None for regular users.
Plugin authors may have to update their matches on `Value` if they use
`nu-protocol`
Needs benchmarking to see if there is a benefit in real world workloads.
**Update** small improvements in runtime for workloads with high volume
of values. Significant reduction in maximum resident set size, when many
values are held in memory.
# Tests + Formatting
# Description
Changes old `from xml` `to xml` data formats. See #7682 for reasoning
behind this change.
Output is now a series of records with `tag`, `attributes` and `content`
fields.
Old:
New:
# User-Facing Changes
New output/input format, better error handling for `from xml` and `to
xml` commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Prototype replacement for `enter`, `n`, `p`, `exit` built-ins
implemented as scripts in standard library.
MVP-level capabilities (rough hack), for feedback please. Not intended
to merge and ship as is.
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
New command in standard library
```nushell
〉use ~/src/rust/nushell/crates/nu-utils/standard_library/dirs.nu
---------------------------------------------- /home/bobhy ----------------------------------------------
〉help dirs
module dirs.nu -- maintain list of remembered directories + navigate them
todo:
* expand relative to absolute paths (or relative to some prefix?)
* what if user does `cd` by hand?
Module: dirs
Exported commands:
add (dirs add), drop, next (dirs next), prev (dirs prev), show (dirs show)
This module exports environment.
---------------------------------------------- /home/bobhy ----------------------------------------------
〉dirs add ~/src/rust/nushell /etc ~/.cargo
-------------------------------------- /home/bobhy/src/rust/nushell --------------------------------------
〉dirs next 2
------------------------------------------- /home/bobhy/.cargo -------------------------------------------
〉dirs show
╭───┬─────────┬────────────────────╮
│ # │ current │ path │
├───┼─────────┼────────────────────┤
│ 0 │ │ /home/bobhy │
│ 1 │ │ ~/src/rust/nushell │
│ 2 │ │ /etc │
│ 3 │ ==> │ ~/.cargo │
╰───┴─────────┴────────────────────╯
------------------------------------------- /home/bobhy/.cargo -------------------------------------------
〉dirs drop
---------------------------------------------- /home/bobhy ----------------------------------------------
〉dirs show
╭───┬─────────┬────────────────────╮
│ # │ current │ path │
├───┼─────────┼────────────────────┤
│ 0 │ ==> │ /home/bobhy │
│ 1 │ │ ~/src/rust/nushell │
│ 2 │ │ /etc │
╰───┴─────────┴────────────────────╯
---------------------------------------------- /home/bobhy ----------------------------------------------
〉
```
# Tests + Formatting
Haven't even looked at stdlib `tests.nu` yet.
Other todos:
* address module todos.
* integrate into std lib, rather than as standalone module. Somehow
arrange for `use .../standard_library/std.nu` to load this module
without having to put all the source in `std.nu`?
* Maybe command should be `std dirs ...`?
* what else do `enter` and `exit` do that this should do? Then deprecate
those commands.
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This works around a bug introduced by #8058
We should revisit the original fix, as it makes some assumptions about
how stdout redirection is used by `table`. We use the stdout by default
for table regularly during a repl session, so we should instead
special-case case for handling externals.
# User-Facing Changes
Restores the original default `table` behaviour for binary data
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes the crash when handing `{}#.}`
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is a follow-up from https://github.com/nushell/nushell/pull/8173,
which was merged shortly after the 0.76 release. That PR changed
`default_env.nu` so that the user's home folder is displayed as `~` in
the left prompt. It did so using `get -i`.
This PR just rewrites the Nu code from
https://github.com/nushell/nushell/pull/8173 to use `try`/`catch`
instead of `-i`, which will make it easier to remove the `-i` flags from
`get` and `select` eventually (see
https://github.com/nushell/nushell/pull/8379).
I would like to merge this before the 0.77 release, so we don't end up
with lots of `env.nu` files using `get -i` out in the wild.
A tiny fix: make the naming of the `sqlite` feature consistent across
both `Cargo.toml` and the `version` command's output. Previously
`version` displayed it as `database`, a user was asking about that the
other day.
# Description
in https://github.com/nushell/nushell/issues/8311 and the discord
server, the idea of moving the default banner from the `rust` source to
the `nushell` standar library has emerged 😋
however, in order to do this, one need to have access to all the
variables used in the default banner => all of them are accessible
because known constants, except for the startup time of the shell, which
is not anywhere in the shell...
#### this PR adds exactly this, i.e. the new `startup_time` to the `$nu`
variable, which is computed to have the exact same value as the value
shown in the banner.
## the changes
in order to achieve this, i had to
- add `startup_time` as an `i64` to the `EngineState` => this is, to the
best of my knowledge, the easiest way to pass such an information around
down to where the banner startup time is computed and where the `$nu`
variable is evaluated
- add `startup-time` to the `$nu` variable and use the `EngineState`
getter for `startup_time` to show it as a `Value::Duration`
- pass `engine_state` as a `&mut`able argument from `main.rs` down to
`repl.rs` to allow the setter to change the value of `startup_time` =>
without this, the value would not change and would show `-1ns` as the
default value...
- the value of the startup time is computed in `evaluate_repl` in
`repl.rs`, only once at the beginning, and the same value is used in the
default banner 👌
# User-Facing Changes
one can now access to the same time as shown in the default banner with
```bash
$nu.startup-time
```
# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🟢 `cargo test --workspace`
# After Submitting
```
$nothing
```
# Description
Fixes#8245. Instead of trying to use `nano` or `notepad` as defaults,
it errors out if finds that `buffer_editor` , $EDITOR, $VISUAL do not
exist.
If the PR is landed, Ill update the website as it means what its in
there is no longer correct.
```
❯ config nu
Error:
× No editor configured
╭─[entry #3:1:1]
1 │ config nu
· ────┬────
· ╰── Please specify one via environment variables $EDITOR or $VISUAL
╰────
help: Nushell's config file can be found with the command: $nu.config-path. For more help: (https://nushell.sh/book/configuration.html#configurations-with-built-in-commands)
```
# User-Facing Changes
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.
This reverts https://github.com/nushell/nushell/pull/8114 which upgraded
to `notify` (a file watching crate used by the `watch` command) v5.
`notify` v5 has several breaking changes and it's much harder to use. It
no longer includes debouncing of file system events, which I think is
essential functionality for `watch`. @WindSoilder was going to try
writing our own debouncing functionality but I don't think he had time
to finish it.
@WindSoilder Is it OK if we revert this for the 0.77 release (March 14)?
We can try again for 0.78
Add two rows in `$nu`, `$nu.is-interactive` and `$nu.is-login`, which
are true when nu is run in interactive and login mode respectively.
The `-i` flag now behaves a bit more like that of bash's, where the any
provided command or file is run without REPL but in "interactive mode".
This should entail sourcing interactive-mode config files, but since we
are planning on overhauling the config system soon, I'm holding off on
that. For now, all `-i` does is set `$nu.is-interactive` to be true.
About testing, I can't seem to find where cli-args get tested, so I
haven't written any new tests for this. Also I don't think there are any
docs that need updating. However if I'm wrong please tell me.
# Description
Hides https://github.com/nushell/nushell/pull/7925 from config and
disables by default. Option is still present in config, just hidden.
# User-Facing Changes
Users can no longer find `table.show_empty` in config and it is set to
false by default.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes an error message that popped up after landing a PR #8337.
I guess there were too many changes since the PR was submitted?
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
this PR adds the `path add` command to
`crates/nu-utils/standard_library/std.nu`
- this comes from frequent questions over on the discord server, about
how to add directories to the `PATH`
- this is greatly inspired from the [original
`path-add`](https://discord.com/channels/601130461678272522/615253963645911060/1081206660816699402)
from @melMass
- allows to prepend and append a variable number of directories to the
`PATH`
- i've added a description with an example
- i've added tests in `crates/nu-utils/standard_library/tests.nu` that
hopefully covers all the features
# User-Facing Changes
`path add` can now be used from `std.nu`
# Tests + Formatting
the tests pass with
```bash
nu crates/nu-utils/standard_library/tests.nu
```
# After Submitting
```bash
$nothing
```
# Description
Fix for data ambiguity noted in #8244.
Basic change is to use nanosecond resolution for unix timestamps (stored
in type Int). Previously, a timestamp might have seconds, milliseconds
or nanoseconds, but it turned out there were overlaps in data ranges
between different resolutions, so there wasn't always a unique mapping
back to date/time.
Due to higher precision, the *range* of dates that timestamps can map to
is restricted. Unix timestamps with seconds resolution and 64 bit
storage can cover all dates from the Big Bang to eternity. Timestamps
with seconds resolution and 32 bit storage can only represent dates from
1901-12-13 through 2038-01-19. The nanoseconds resolution and 64 bit
storage used with this fix can represent dates from 1677-09-21T00:12:44
to 2262-04-11T23:47:16, something of a compromise.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
## `<datetime> | into int`
Converts to nanosecond resolution
```rust
〉date now | into int
1678084730502126846
```
This is the number of non-leap nanoseconds after the unix epoch date:
1970-01-01T00:00:00+00:00.
Conversion fails for dates outside the supported range:
```rust
〉1492-10-12 | into int
Error: nu:🐚:incorrect_value
× Incorrect value.
╭─[entry #51:1:1]
1 │ 1492-10-12 | into int
· ────┬───
· ╰── DateTime out of timestamp range 1677-09-21T00:12:43 and 2262-04-11T23:47:16
╰────
```
## `<int> | into datetime`
Can no longer fail or produce incorrect results for any 64-bit input:
```rust
〉0 | into datetime
Thu, 01 Jan 1970 00:00:00 +0000 (53 years ago)
〉"7fffffffffffffff" | into int -r 16 | into datetime
Fri, 11 Apr 2262 23:47:16 +0000 (in 239 years)
〉("7fffffffffffffff" | into int -r 16) * -1 | into datetime
Tue, 21 Sep 1677 00:12:43 +0000 (345 years ago)
```
## `<date> | date to-record` and `<date> | date to-table`
Now both have a `nanosecond` field.
```rust
〉"7fffffffffffffff" | into int -r 16 | into datetime | date to-record
╭────────────┬───────────╮
│ year │ 2262 │
│ month │ 4 │
│ day │ 11 │
│ hour │ 23 │
│ minute │ 47 │
│ second │ 16 │
│ nanosecond │ 854775807 │
│ timezone │ +00:00 │
╰────────────┴───────────╯
〉"7fffffffffffffff" | into int -r 16 | into datetime | date to-table
╭───┬──────┬───────┬─────┬──────┬────────┬────────┬────────────┬──────────╮
│ # │ year │ month │ day │ hour │ minute │ second │ nanosecond │ timezone │
├───┼──────┼───────┼─────┼──────┼────────┼────────┼────────────┼──────────┤
│ 0 │ 2262 │ 4 │ 11 │ 23 │ 47 │ 16 │ 854775807 │ +00:00 │
╰───┴──────┴───────┴─────┴──────┴────────┴────────┴────────────┴──────────╯
```
This change was not mandated by the OP problem, but it is nice to be
able to see the nanosecond bits that were present in Nushell `date` type
all along.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
i tried yesterday to `encode` with an invalid character set and this is
what i got
```bash
>_ {alg: "HS256", type: "JWT"} | to json -r | encode base64 --character-set invalid-character-set
Error:
× value is not an accepted character set
╭─[entry #11:1:1]
1 │ {alg: "HS256", type: "JWT"} | to json -r | encode base64 --character-set invalid-character-set
· ──────────┬──────────
· ╰── invalid-character-set is not a valid character-set.
Please use `help hash base64` to see a list of valid character sets.
╰────
```
but `hash base64` is now a deprecated command, see `help hash base64`.
=> **this PR changes the error message to mention `help encode base64`,
where the list of valid character sets is, instead**
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🟢 `cargo test --workspace`
# After Submitting
```
$nothing
```
