Previously, we weren't expanding `~`, so `std::fs::metadata` was failing. We now
make use of `PathSuggestion` to get the actual path, as represented by a
`PathBuf`.
* remove unused dependencies
* moved umask to cfg(unix)
* changed Inflector to inflector, hoping it fixes the issue.
* roll back Inflector
* removed commented out deps now that everything looks good.
* First commit updating `config` to use subcommands (#2119)
- Implemented `get` subcommand
* Implmented `config set` as a subcommand.
* Implemented `config set_into` as subcommand
* Fixed base `config` command
- Instead of outputting help, it now outputs the list of all
configuration parameters.
* Added `config clear` subcommand
* Added `config load` and `config remove` subcommands
* Added `config path` subcommand
* fixed clippy
* initial commit for implementing groups
* each group works
* each group is slightly cleaner + added example
* Added `each window` subcommand
- No support for stride flag yet
* each window stride implemented
* Added tests and minor documentation changes
* fixed clippy
* fixed clippy again
Previously, we'd check for a `~/` prefix and then return the home directory as
the base `PathBuf`. We failed to consider pushing any of the other possible path
components into this base dir, which prevent completions more than one level
deep (for example, `~/.config/<TAB>` would fail).
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* clean up some comments
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* added weather symbols/chars
Although convenient, since the user doesn't have to type the space, it could be
a little surprising to users since they may think that was the only completion
in certain completions modes (for example, `cycle`).
* fixed: .*.(ext|*)
* ls **/* does not return hidden files without the -a flag
* fixed formatting
* fixed clippy issues
* fixed clippy issues, v2
* added `#[cfg(unix)]` to windows-failing test
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* ensure ansi mode is enabled on windows
ansi mode sometimes gets out of sync in Windows.
I'm not sure why but this appears to fix it.
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* shouldn't these both bet clipboard-cli?
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* fixed bug where no config.toml or not set settings made weird defaults.
* clippy & fmt again
* Header default alignment is left.
Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* some info on how to set colors
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* removed extra comments
* Use the cursor position for the span when between locations.
This fixes a bug where completing
ls <TAB>
would result in replacing the entire line.
* Revert to the default update implementation.
Replacing the length of the elected value was intended to do replacement when
one moves inside a quote. The problem is that a long elected suggestion could
replace bits of a pipeline that are after the cursor. For example:
ls <TAB> | get name | str collect
We ensure the partially cimpleted item doesn't include the end quote. We also
ensure that the appropriate span is replaced, not just the suggested position up
to the cursor position.
- Ensure quotes surround suggestion replacement when there are spaces.
- Ensure an appropriate quote character is chosen based on other quoting
characters being in the suggestions.
Previously, we used rustyline's filename completer. This allowed us to make
progress on the completion engine without building all the parts at once. We now
need our own filename completer to make progress.
The primary driver to having our own filename completer is that it can better
integrate with our path constructs. For example, if we have
> ls .../<TAB>
we want to show a list of suggestions that includes all files two directories up
from the current working directory. The least jarring experience to a user would
be to maintain the three dots. The easiest way for us to do this is by building
our own completer and path constructs.
Doing 'cd .' or an equal command used to modify the prompt: It appended an './' and was even
repeatable, leading to strange prompts (believe me, I tested it for too long).
This fixes#2432
* Show directories and executable for command completion.
Previously we chose from two sets for completing the command position:
1. internal commands, and
2. executables relative to the PATH environment variable.
We now also show directories/executables that match the relative/absolute path
that has been partially typed.
* Fix for Windows
* Allow the calculation of bytes and int.
* fix clippy.
* minimal implement the into_into command.
* Revert "fix clippy."
This reverts commit 0d7cf72ed2.
* Revert "Allow the calculation of bytes and int."
This reverts commit 9c4e3787f5.
* set the argument to any type.
* if the argument is an int, return it with no change in value.
* add tests for into-int command.
* fix a faild test.
* plugin changes to support script plugins
* all platforms can have plugins with file extensions
* added .cmd, .py, .ps1 for windows
* added more trace! statements to document request and response
* WIP
* pretty much working, need to figure out sink plugins
* added a home for scripting plugin examples, ran fmt
* Had a visit with my good friend Clippy. We're on speaking terms again.
* add viable plugin extensions
* clippy
* update to load plugins without extension in *nix/mac.
* fmt
Previously, lite parse would stack up opening delimiters in vec, and if we
didn't close everything off, it would simply return an error with a partial form
that didn't include the missing closing delimiters. This commits adds those
delimiters so that `classify_block` can parse correctly.
The parser sees this as a positional argument, but when requesting completions
this could be either a filename that starts with a hyphen, or it could be a
flag. This expands the completion engine's interface to return a vec of possible
completion locations instead of an optional one, because we want to show all
possibilities instead of assuming one or the either.
The completion engine maps completion locations to spans on a line, which
indicate whther to complete a command name, flag name, argument, and so on.
Initial implementation is simplistic, with some rough edges, since it relies
heavily on the parser's interpretation. For example
du -
if asking for completions, `-` is considered a positional argument by the
parser, but the user is likely looking for a flag. These scenarios will be
addressed in a series of progressive enhancements to the engine.
* Add deserialization of Primitive::Duration; Fixes#2373
* Implement Sleep command
* Add comment saying you should name your rest field "rest"
* Fix typo
* Add documentation for sleep command
* created text_color and line_color functions with hopes of theming soon.
* added text_color and line_color to hastableproperties
* Refactor Tractor.
* more refactoring
* make sort-by fail gracefully if mismatched types are compared
* Added a test to check if sorted-by with invalid types exists gracefully
* Linter changes
* removed redundant pattern matching
* Changed the error message
* Added a comma after every argument
* Changed the test to accomodate the new err messages
* Err message for sort-by invalid types now shows the mismatched types
* Lints problems
* Changed unwrap to expect
* Modify testcase
* Run exitscript in the folder it was specified
* Update documentation
* Add comment
* Borrow instead of clone
* Does this just... work on windows?
* fmt
* as_str
* Collapse if by order of clippy
* Support windows
* fmt
* refactor tests
* fmt
* This time it will work on windows FOR SURE
* Remove debug prints
* Comment
* Refactor tests
* fmt
* fix spelling
* update comment
* added various case conversion commands for str. Added the inflection crate as a dependency
* lighten the restriction on the inflector dependency
* publishing the case commands
* fix typo
* fix kebab case test
* formatting
The initial configuration refactoring already gave significant benefits
with my use case. On another note, Commands should know and ask for
configuration variables. We could, as we refactor, add the ability
for commands to tell what configuration variables knows about and
their types.
This way, completers can be used too when using `config` command if we
also add a sub command that config could set variables to.
Commands stating the config variables they know about will allow us
to implement it in `help` and display them.
* Changed time units as outlined in issue #2353.
Also applied changes to to_str for Unit - not sure if that was what was wanted.
* Forgot the tests!
* Updated primitive.rs to match changes.
* Updated where example to match changes.
* And the html test!
* Add commit to version command
* Replace unwrap with expect.
* Only have commit hash if git doesn't error
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Remove `with-symlink-targets` flag from `ls`
* Fix test to use `ls -l` to output all the columns of `ls`
* Fix error message
* Delete test that originally covered `ls -w`
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Updated version hashing and bumped nu-cli to 0.18.1
* made code pertyer
* Update version.rs
* Update version.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Make history location configurable
Add history-path to your config if you want an alternate history file
location
* use IndexMap.get() instead of index
Co-authored-by: Amanita Muscaria <nope>
* add 228 json html themes
removed old assets, added new zipped asset
added --list to get a list of the theme names
reworked some older theme code
added rust-embed and zip crate
removed the dark tests
* fmt
* Updated, removed excess comments
Changed usage a bit
Updated the error handling
Added some helper items in --list
* removed rustyline config duplication
set other rustyline defaults if line_editor section doesn't exist
updated keyseq_timeout to -1 if emacs mode is chosen
* change checking rustyline config to if lets
* removed some unneccessary code
Refactored out most of internal work for summarizing data opening
the door for generating charts from it. A model is introduced
to hold information needed for a summary, Histogram command is
an example of a partial usage. This is the beginning.
Removed implicit arithmetic traits on Value and Primitive to avoid
mixed types panics. The std operations traits can't fail and we
can't guarantee that. We can handle gracefully now since compute_values
was introduced after the parser changes four months ago. The handling
logic should be taken care of either explicitly or in compute_values.
The zero identity trait was also removed (and implementing this forced
us to also implement Add, Mult, etc)
Also: the `math` operations now remove in the output if a given column is not computable:
```
> ls | math sum
──────┬──────────
size │ 150.9 KB
──────┴──────────
```
* Delete unnecessary match
* Use `unwrap_or_else()`
* Whitespace was trim on file save
* Use `map_or_else()`
* Use a default to group all match arms with same output
* Clippy made me do it
* Move lite_parse tests into a submodule
* Have lite_parse return partial parses when error encountered.
Although a parse fails, we can generally still return what was successfully
parsed. This is useful, for example, when figuring out completions at some
cursor position, because we can map the cursor to something more structured
(e.g., cursor is at a flag name).
* Add two further path cmds - type and exists
* Update type.rs
Try a more universal directory
* Update type.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Add new path commands
basename, expand and extension. Currently there is no real error
handling. expand returns the initial path if it didn't work, the others
return empty string
* Optionally apply to path
- Removing old code for dealing with escaping, since that has moved elsewhere.
- Eliminating some match statements in favour of result/option methods.
- Fix an issue where completing inside quotes could remove the quote at the
beginning, if one already existed on the line but the replacement didn't have
a quote at the beginning.
* Refactor all completion logic into `NuCompleter`
This is the next step to improving completions. Previously, completion logic was
scattered about (`FilesystemShell`, `NuCompleter`, `Helper`, and `ShellManager`).
By unifying the core logic into a central location, it will be easier to take the
next steps in improving completion.
* Update context.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
In any other shell, stderr is inherited like normal, and only piped if you
request it explicitly (e.g., `2>/dev/null`). In the case of a command like
`fzf`, stderr is used for the interactive selection of files. By piping it,
something like
fzf | xargs echo
does not work. By removing all stderr piping we eliminate this issue. We can
return later with a way to deal with stderr piping when an actual use case
arises.
* added campbell theme to html colors
* updated test results. had to make change for ci.
* hopefully the last changes for this stupid test :)
* moved tests to html.rs
* remove unnecessary using statement.
* still fighting with tests and tests are winning.
* Rename `calc` to `math eval` and allow it to optionally take the expression as an argument
* Moved calc tests to math eval
Also added 2 tests and changed 1 test
* Move calc docs to math eval
* Introduce completion abstractions to nushell.
Currently, we rely on rustyline's completion structures. By abstracting this
away, we are more flexible to introduce someone elses completion engine, or our
own.
* Update value_shell.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Working towards a PoC for wasm
* Move bson and sqlite to plugins
* proof of concept now working
* tests are green
* Add CI test for --no-default-features
* Fix some tests
* Fix clippy and windows build
* More fixes
* Fix the windows build
* Fix the windows test
* Very rough idea
* Remove colour codes
* Work on command for generating docs
* Quick comment
* Use nested collapsible markdown
* Refine documentation command
* Clippy and rename docs
* This layout probably seems best
Also moved some code to documentation.rs to avoid making help.rs massive
* Delete summaries.md
* Add usage strings
* Remove static annotations
* get_documentation produces value
Which will be used like
'help generate_docs | save "something"'
The resulting yaml can be passed to a script for generating HTML/MD files in the website
* Fix subcommands
* DRY code
* Address clippy:
* Fix links
* Clippy lints
* Move documentation to more central location
