# Description
Previously `group-by` returned a record containing each group as a
column. This data layout is hard to work with for some tasks because you
have to further manipulate the result to do things like determine the
number of items in each group, or the number of groups. `transpose` will
turn the record returned by `group-by` into a table, but this is
expensive when `group-by` is run on a large input.
In a discussion with @fdncred [several
workarounds](https://github.com/nushell/nushell/discussions/10462) to
common tasks were discussed, but they seem unsatisfying in general.
Now when `group-by --to-table` is used a table is returned with the
columns "groups" and "items" making it easier to do things like count
the number of groups (`| length`) or count the number of items in each
group (`| each {|g| $g.items | length`)
# User-Facing Changes
* `group-by` returns a `table` with "group" and "items" columns instead
of a `record` with one column per group name
# Tests + Formatting
Tests for `group-by` were updated
# After Submitting
* No breaking changes were made. The new `--to-table` switch should be
added automatically to the [`group-by`
documentation](https://www.nushell.sh/commands/docs/group-by.html)
related to
-
https://discord.com/channels/601130461678272522/614593951969574961/1162406310155923626
# Description
this PR
- does a bit of minor refactoring
- makes sure the input paths get expanded
- makes sure the input PATH gets split on ":"
- adds a test
- fixes the other tests
# User-Facing Changes
should give a better overall experience with `std path add`
# Tests + Formatting
adds a new test case to the `path_add` test and fixes the others.
# After Submitting
# Description
just caught a last mention to `let-env` in the `CONTRIBUTING.md`
document 😋
# User-Facing Changes
# Tests + Formatting
# After Submitting
Fixes#10696
# Description
As reported, you could mess up the ring of remembered directories in
`std dirs` (a.k.a the `shells` commands) with a sequence like this:
```
~/test> mkdir b c
~/test> pushd b
~/test/b> cd ../c
~/test/c> goto 0
~/test> goto 1
## expect to end up in ~/test/c
## observe you're in ~/test/b
~/test/b>
```
Problem was `dirs goto` was not updating the remembered directories
before leaving the current slot for some other. This matters if the user
did a manual `cd` (which cannot update the remembered directories ring)
# User-Facing Changes
None! it just works ™️
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR removes the underline from the log format. It's been messing
things up for me since there is no ansi reset in the log format and
therefore everything after it is underlined.
This PR should end things like this.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
follow up to
- #10283
# Description
even though it appears defining `to foo` does not allow to do `save
x.foo` for free (see https://github.com/nushell/nushell/issues/10429),
because #10283 did add `from ndjson` and `from jsonl` to the standard
library, i thought adding their `to ...` counterpart would make sense
😋
# User-Facing Changes
users can now convert structured data back to NDJSON and JSONL 👌
# Tests + Formatting
this PR adds the exact same tests as for the `from ...` commands
- structured data is in `result` and the string is now the expected
- the two invalid `from ...` tests cannot be reproduced for `to ...`
afaik
# After Submitting
# Description
Retrieving tests and their annotation no longer uses nu --ide-ast
spawned in a subprocess which should reduce test runner startup time.
# User-Facing Changes
# Tests + Formatting
# After Submitting
fixes#10455
@KAAtheWiseGit, I'm sorry, I didn't mean to block your first PR #10461,
didn't see you had submitted it till I got around to submitting this. If
you want to incoporate useful ideas from this PR into yours, I do not
mind deferring to you.
# Description
Changes made in `datetime-diff`:
* Initialize millisecond and microsecond fields in `$current`, to fix
the error when borrow needs to refer to them.
* Fix `borrow_nanoseconds` to borrow from seconds, not from (unused)
microseconds.
* Added error check to insist that first argument is >= second argument.
`datetime-diff` doesn't represent negative durations correctly (it tries
to borrow out of the year, resulting in negative year and positive all
other fields). We don't currently have a use case requiring negative
durations.
* Add comments so help is a bit clearer (I was surprised that the first
argument, named `$from` was actually supposed to be the *later*
datetime. The order of arguments is reasonable (reminiscent of <later>
<minus> <earlier>), so I just changed the param name to match its
purpose.
Changes made in `pretty-print-duration`:
* changed type of argument from `duration` to `record`. (it's not clear
why Nu was not complaining about this!)
* changed test for skipping a clause from `> 0` to `!= 0`. Even though
`datetime-diff` won't present a negative field in the record, user might
call `pretty-print-duration` with one, might as well handle it. (but I
think `hour:-2` will be rendered as `-2hr`, not `-2hrs`...).
* added help and an example.
# User-Facing Changes
none requiring code changes.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
-
- # After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
- https://github.com/nushell/nushell/pull/10456
# Description
this PR will fix the public API of the standard library by removing the
type annotations from public boolean switches.
1. the signature before
```nushell
clip [--silent: bool, --no-notify: bool, --no-strip: bool, --expand (-e): bool, --codepage (-c): int]
```
2. the signature after
```nushell
clip [--silent, --no-notify, --no-strip, --expand (-e), --codepage (-c): int]
```
# User-Facing Changes
### before
```nushell
> "foo" | clip
Error: nu:🐚:cant_convert
× Can't convert to bool.
╭─[NU_STDLIB_VIRTUAL_DIR/std/mod.nu:148:1]
148 │ $in
149 │ | if $expand { table --expand } else { table }
· ───┬───
· ╰── can't convert nothing to bool
150 │ | into string
╰────
```
### after
```nushell
> "foo" | clip
foo
saved to clipboard
```
# Tests + Formatting
# After Submitting
# Description
Fixes: #10450
This pr differentiating between `--x: bool` and `--x`
Here are examples which demostrate difference between them:
```nushell
def a [--x: bool] { $x };
a --x # not allowed, you need to parse a value to the flag.
a # it's allowed, and the value of `$x` is false, which behaves the same to `def a [--x] { $x }; a`
```
For boolean flag with default value, it works a little bit different to
#10450 mentioned:
```nushell
def foo [--option: bool = false] { $option }
foo # output false
foo --option # not allowed, you need to parse a value to the flag.
foo --option true # output true
```
# User-Facing Changes
After the pr, the following code is not allowed:
```nushell
def a [--x: bool] { $x }; a --x
```
Instead, you have to pass a value to flag `--x` like `a --x false`. But
bare flag works in the same way as before.
## Update: one more breaking change to help on #7260
```
def foo [--option: bool] { $option == null }
foo
```
After the pr, if we don't use a boolean flag, the value will be `null`
instead of `true`. Because here `--option: bool` is treated as a flag
rather than a switch
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
We made the decision that our floating point type should be referred to
as `float` over `decimal`.
Commands were updated by #9979 and #10320
Now make the internal codebase consistent in referring to this data type
as `float`.
Work for #10332
# User-Facing Changes
`decimal` has been removed as a type name/symbol.
Instead of
```nushell
def foo [bar: decimal] decimal -> decimal {}
```
use
```nushell
def foo [bar: float] float -> float {}
```
Potential effect of `SyntaxShape`'s `Display` implementation now also
referring to `float` instead of `decimal`
# Details
- Rename `SyntaxShape::Decimal` to `Float`
- Update `Display for SyntaxShape` to `float`
- Update error message + fn name in dataframe code
- Fix docs in command examples
- Rename tests that are float specific
- Update doccomment on `SyntaxShape`
- Update comment in script
# Tests + Formatting
Updates the names of some tests
# Description
By using a `from: 1` the additional subexpression for `to` becomes
unnecessary.
Saves additional evaluation steps if `std repeat` is frequently used
with low `n`
# User-Facing Changes
None
# Tests + Formatting
(-)
# Description
Currently we support "multiplication" of strings, resulting in a terse
way to repeat a particular string.
This can have unintended side effects when dealing with mixed data (e.g.
after parsing data that is not all numbers).
Furthermore as we frequently fall-back to strings while parsing source
code, this introduced a runaway edge case in const evaluation (#10212)
Work for #10233
## Details
- Remove python-like string multiplication.
- Workaround for indentation
- This should probably be addressed with a purpose built command
- Remove special const-eval error test
# User-Facing Changes
**Major breaking change!**
`"string" * 42` will stop working. (This was used for example in the
stdlib)
We should bless a good alternative before landing this
---------
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
related to
- https://github.com/nushell/nushell/issues/10233
- https://github.com/nushell/nushell/pull/10293
- https://github.com/nushell/nushell/pull/10292
inspired by @kubouch
# Description
this PR adds a `repeat` command to the standard library
# User-Facing Changes
a new `repeat` command in `std`
```nushell
repeat anything a bunch of times, yielding a list of *n* times the input
# Examples
repeat a string
> "foo" | std repeat 3 | str join
"foofoofoo"
Usage:
> repeat <n>
Flags:
-h, --help - Display the help message for this command
Parameters:
n <int>: the number of repetitions, must be positive
Input/output types:
╭───┬───────┬───────────╮
│ # │ input │ output │
├───┼───────┼───────────┤
│ 0 │ any │ list<any> │
╰───┴───────┴───────────╯
```
# Tests + Formatting
a new test called `repeat_things` in `test_std.nu`
# After Submitting
# Description
We keep "into decimal" for a release and warn through a message that it
will be removed in 0.86.
All tests are updated to use `into float`
# User-Facing Changes
`into decimal` raises a deprecation warning, will be removed soon.
Use `into float` as the new functionally identical command instead.
```
~/nushell> 2 | into decimal
Error: × Deprecated command
╭─[entry #1:1:1]
1 │ 2 | into decimal
· ──────┬─────
· ╰── `into decimal` is deprecated and will be removed in 0.86.
╰────
help: Use `into float` instead
2
```
# Tests + Formatting
Updated
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
close#8574
related #10276
# Description
added below into standard library
```
def "from ndjson" []: string -> any {
from json --objects
}
```
# User-Facing Changes
Users can use functions like "from ndjson" in standard library, and can
open ndjson files with `open` command.
```
use std formats *
# `from ndjson` is available now
open sample.ndjson
```
# Tests + Formatting
`toolkit check pr`
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
this closes#10248
@fdncred pointed out the problem and he was correct 😄
I went ahead and made the simple change and the
https://github.com/influxdata/influxdb_iox binary
works like a charm...
@amtoine hopefully there are no issues with this change
I believe its a good one as other rust binaries might take advantage of
this common
environment variable as well...
# Description
we talked about this before in some meetings so i thought, why not?
the hope is that these constants do not require Rust code to be
implemented and that this move will make the Rust source base a bit
smaller 🤞
# User-Facing Changes
mathematical constants (e, pi, tau, phi and gamma) are now in `std math`
rather than `math`
## what can be done
```nushell
> use std; $std.math
> use std math; $math
> use std *; $math
```
will all give
```
╭───────┬────────────────────╮
│ GAMMA │ 0.5772156649015329 │
│ E │ 2.718281828459045 │
│ PI │ 3.141592653589793 │
│ TAU │ 6.283185307179586 │
│ PHI │ 1.618033988749895 │
╰───────┴────────────────────╯
```
and the following will work too
```nushell
> use std math E; $E
2.718281828459045
```
```nushell
> use std math *; $GAMMA
0.5772156649015329
```
## what can NOT be done
looks like every export works fine now 😌
# Tests + Formatting
# After Submitting
# Description
* The path to the binaries for tests is slightly incorrect. It is
missing the build target when it is set with the `CARGO_BUILD_TARGET`
environment variable. For example, when `CARGO_BUILD_TARGET` is set to
`aarch64-linux-android`, the path to the `nu` binary is:
`./target/aarch64-linux-android/debug/nu`
rather than
`./target/debug/nu`
This is common on Termux since the default target that rustc detects can
cause problems on some projects, such as [python's `cryptography`
package](https://github.com/pyca/cryptography/issues/7248).
This technically isn't a problem specific to Android, but is more likely
to happen on Android due to the latter.
* Additionally, the existing variable named `NUSHELL_CARGO_TARGET` is in
fact the profile, not the build target, so this was renamed to
`NUSHELL_CARGO_PROFILE`. This change is included because without the
rename, the build system would be using `CARGO_BUILD_TARGET` for the
build target and `NUSHELL_CARGO_TARGET` for the build profile, which is
confusing.
* `std path add` tests were missing `android` test
# User-Facing Changes
For those who would like to build nushell on Termux, the unit tests will
pass now.
# Description
This PR bumps nushell from release version 0.84.0 to dev version 0.84.1.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
-
https://discord.com/channels/601130461678272522/615253963645911060/1142060647358668841
# Description
in order to make the charpage for Windows as general as possible, `chcp`
will only run on Windows when `--charpage` is given an integer.
while i was at it, i fixed the system messages given to
`check-clipboard` because some of the were incorrect => see the second
commit 6865ec9a5
# User-Facing Changes
this is a breaking change as users relying on the fact that `std clip`
changed the page to `65001` by itself is not true anymore => they will
have to add `--charpage 65001`.
# Tests + Formatting
# After Submitting
# Description
Closes: #9891
I also think it's good to keep command name consistency.
And moving `date format` to deprecated.
# User-Facing Changes
Running `date format` will lead to deprecate message:
```nushell
❯ "2021-10-22 20:00:12 +01:00" | date format
Error: nu:🐚:deprecated_command
× Deprecated command date format
╭─[entry #28:1:1]
1 │ "2021-10-22 20:00:12 +01:00" | date format
· ─────┬─────
· ╰── 'date format' is deprecated. Please use 'format date' instead.
╰────
```
# Description
This bumps nushell to the dev version of 0.83.1 and updates the default
config files with the proper version.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
Bump 0.83
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to a comment in https://github.com/nushell/nushell/pull/9500
> `cargo run -- crates/nu-std/tests/run.nu` Not done - doesn't seem to
work
this is absolutely true because the command in the PR template was
obsolete...
i've also updated the commands in the `CONTRIBUTING` document of the
library 👍
cc/ @fnordpig
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Max amount of threads used by the test runner can now be configured via
the `--threads` flag
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Test-runner performance improved by:
* Not loading user config or stdlib during ide parsing
* Not loading user config during test execution
* Running tests in parallel instead of serially
On my machine `toolkit test stdlib` execution time went from 38s to 15s
(with all code precompiled)
Use regex match for test include/exclude and module exclude to allow for
multiple tests/modules to be excluded.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds two additional flags to the test runner `--exclude` and
`--exclude-module` which as the name suggests allow to exclude tests
from a run
The now options only support a single test / module to exclude.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
Add a `keybindings get` command to listen and get individual "keyboard"
events. This includes different keyboard keys (see example of use) on
seemingly all terminals and mouse, resize, focus and paste events on
some special once. The record returned by this command is similar to
crossterm event structure and is documented in help message. For ease of
use, option `--types` can get a list of event types to filter only
desired events automatically. Additionally `--raw` options displays raw
code of char keys and numeric format of modifier flags.
Example of use, moving a character around a grid with arrow keys:
```nu
def test [] {
mut x = 0
mut y = 0
loop {
clear
$x = ([([$x 4] | math min) 0] | math max)
$y = ([([$y 4] | math min) 0] | math max)
for i in 0..4 {
for j in 0..4 {
if $j == $x and $i == $y {
print -n "*"
} else {
print -n "."
}
}
print ""
}
let inp = (input listen-t [ key ])
match $inp.key {
{type: other key: enter} => (break)
{type: other key: up} => ($y = $y - 1)
{type: other key: down} => ($y = $y + 1)
{type: other key: left} => ($x = $x - 1)
{type: other key: right} => ($x = $x + 1)
_ => ()
}
}
}
```
# User-Facing Changes
- New `keybindngs get` command
- `keybindings listen` is left as is
- New `input display` command in std, mirroring functionality of
`keybindings listen`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Test runner now uses annotations instead of magic function names to pick
up code to run. Additionally skipping tests is now done on annotation
level so skipping and unskipping a test no longer requires changes to
the test code
In order for a function to be picked up by the test runner it needs to
meet following criteria:
* Needs to be private (all exported functions are ignored)
* Needs to contain one of valid annotations (and only the annotation)
directly above the definition, all other comments are ignored
Following are considered valid annotations:
* \# test
* \# test-skip
* \# before-all
* \# before-each
* \# after-each
* \# after-all
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
For years, Nushell has used `let-env` to set a single environment
variable. As our work on scoping continued, we refined what it meant for
a variable to be in scope using `let` but never updated how `let-env`
would work. Instead, `let-env` confusingly created mutations to the
command's copy of `$env`.
So, to help fix the mental model and point people to the right way of
thinking about what changing the environment means, this PR removes
`let-env` to encourage people to think of it as updating the command's
environment variable via mutation.
Before:
```
let-env FOO = "BAR"
```
Now:
```
$env.FOO = "BAR"
```
It's also a good reminder that the environment owned by the command is
in the `$env` variable rather than global like it is in other shells.
# User-Facing Changes
BREAKING CHANGE BREAKING CHANGE
This completely removes `let-env FOO = "BAR"` so that we can focus on
`$env.FOO = "BAR"`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After / Before Submitting
integration scripts to update:
- ✔️
[starship](https://github.com/starship/starship/blob/master/src/init/starship.nu)
- ✔️
[virtualenv](https://github.com/pypa/virtualenv/blob/main/src/virtualenv/activation/nushell/activate.nu)
- ✔️
[atuin](https://github.com/ellie/atuin/blob/main/atuin/src/shell/atuin.nu)
(PR: https://github.com/ellie/atuin/pull/1080)
- ❌
[zoxide](https://github.com/ajeetdsouza/zoxide/blob/main/templates/nushell.txt)
(PR: https://github.com/ajeetdsouza/zoxide/pull/587)
- ✔️
[oh-my-posh](https://github.com/JanDeDobbeleer/oh-my-posh/blob/main/src/shell/scripts/omp.nu)
(pr: https://github.com/JanDeDobbeleer/oh-my-posh/pull/4011)
# Description
This PR does a few things to help improve type hovers and, in the
process, fixes a few outstanding issues in the type system. Here's a
list of the changes:
* `for` now will try to infer the type of the iteration variable based
on the expression it's given. This fixes things like `for x in [1, 2, 3]
{ }` where `x` now properly gets the int type.
* Removed old input/output type fields from the signature, focuses on
the vec of signatures. Updated a bunch of dataframe commands that hadn't
moved over. This helps tie things together a bit better
* Fixed inference of types from subexpressions to use the last
expression in the block
* Fixed handling of explicit types in `let` and `mut` calls, so we now
respect that as the authoritative type
I also tried to add `def` input/output type inference, but unfortunately
we only know the predecl types universally, which means we won't have
enough information to properly know what the types of the custom
commands are.
# User-Facing Changes
Script typechecking will get tighter in some cases
Hovers should be more accurate in some cases that previously resorted to
any.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Checklist
- `nu-ansi-term` remains the same
- [x] `reedline` is released and updated
- [x] release scripts are updated for `nu-cmd-base`
- [x] info blog post is online
- [ ] release notes are ready
