While the `cargo` tools will include crates we depend on in the
directory into the workspace, I observed dependabot not taking all of
our crates into account in its version bump attempts leading to
duplication of outside dependencies.
e.g.
- https://github.com/nushell/nushell/pull/11039
# Description
While #11057 is merged, it's hard to tell the difference between
`--flag: bool` and `--flag`, and it makes user hard to read custom
commands' signature, and hard to use them correctly.
After discussion, I think we can deprecate `--flag: bool` usage, and
encourage using `--flag` instead.
# User-Facing Changes
The following code will raise warning message, but don't stop from
running.
```nushell
❯ def florb [--dry-run: bool, --another-flag] { "aaa" }; florb
Error: × Deprecated: --flag: bool
╭─[entry #7:1:1]
1 │ def florb [--dry-run: bool, --another-flag] { "aaa" }; florb
· ──┬─
· ╰── `--flag: bool` is deprecated. Please use `--flag` instead, more info: https://www.nushell.sh/book/custom_commands.html
╰────
aaa
```
cc @kubouch
# Tests + Formatting
Done
# After Submitting
- [ ] Add more information under
https://www.nushell.sh/book/custom_commands.html to indicate `--dry-run:
bool` is not allowed,
- [ ] remove `: bool` from custom commands between 0.89 and 0.90
---------
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
# Description
Hi! I updated the samples of `str trim` because there were repeated and
clarified the explanations
# User-Facing Changes
Yes! I send the details here:
(`old` is version `88.1` not the latest main)
# Tests + Formatting
~~I ran `toolkit check pr` successfully~~
There was a tiny problem, a test I never touched now it's failing
```nu
(^echo a | complete) == {stdout: "a\n", exit_code: 0}
```
should output `true` but outputs `false`, both in my running `nu`
version and in my PR version
This make the test `nu-command::main commands::complete::basic` fail
located in `crates\nu-command\tests\commands\complete.rs`
# After Submitting
I'm not sure if I need to update nushell.github.io, some of the help is
auto-generated, but maybe not all?
I can file a PR if needed
# Description
Following from #11356, it looks like `Expr::MatchPattern` is no longer
used in any way. This PR removes `Expr::MatchPattern` alongside
`Type::MatchPattern` and `SyntaxShape::MatchPattern`.
# User-Facing Changes
Breaking API change for `nu_protocol`.
# Description
Fixes: #11310
# User-Facing Changes
After the change, the following code will go to error:
```nushell
> def a [--x: int = 3] { "aa" }
> let y = "aa"
> a --x=$y
Error: nu::parser::type_mismatch
× Type mismatch.
╭─[entry #32:2:1]
2 │ let y = "aa"
3 │ a --x=$y
· ─┬
· ╰── expected int, found string
╰────
```
Bumps [shadow-rs](https://github.com/baoyachi/shadow-rs) from 0.24.1 to
0.25.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f08828be45"><code>f08828b</code></a>
Update Cargo.toml</li>
<li><a
href="a3cc1a118f"><code>a3cc1a1</code></a>
Update README.md</li>
<li><a
href="96fdafc738"><code>96fdafc</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/144">#144</a>
from baoyachi/wasm_example</li>
<li><a
href="24d3bd82c0"><code>24d3bd8</code></a>
fix</li>
<li><a
href="aab9bf2d4d"><code>aab9bf2</code></a>
Update check.yml</li>
<li><a
href="1d4e455730"><code>1d4e455</code></a>
add wasm example</li>
<li>See full diff in <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.24.1...v0.25.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR add special handling in `debug -r` for emoji's so that it prints
the code points.
### Before
```nushell
❯ emoji --list | where name =~ farmer | reject utf8_bytes | get 0.emoji | debug -r
String {
val: "🧑\u{200d}🌾",
internal_span: Span {
start: 0,
end: 0,
},
}
```
### After
```nushell
❯ emoji --list | where name =~ farmer | reject utf8_bytes | get 0.emoji | debug -r
String {
val: "\\u{1f9d1}\\u{200d}\\u{1f33e}",
internal_span: Span {
start: 0,
end: 0,
},
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes build for BSD variants (including FreeBSD and NetBSD).
Currently, `procfs` only support linux, android and l4re, and
0cba269d80 only adds support for NetBSD,
this PR should work on all BSD variants.
b153b782a5/procfs/build.rs (L4-L8)Fixes#11373
# User-Facing Changes
* before
```console
nibon7@fbsd /d/s/nushell ((70f7db14))> cargo build
Compiling tempfile v3.8.1
Compiling procfs v0.16.0
Compiling toml_edit v0.21.0
Compiling native-tls v0.2.11
error: failed to run custom build command for `procfs v0.16.0`
Caused by:
process didn't exit successfully: `/data/source/nushell/target/debug/build/procfs-d59599f40f32f0d5/build-script-build` (exit status: 1)
--- stderr
Building procfs on an for a unsupported platform. Currently only linux and android are supported
(Your current target_os is freebsd)
warning: build failed, waiting for other jobs to finish...
```
* after
```console
nushell on bsd [✘!?] is 📦 v0.88.2 via 🦀 v1.74.1
❯ version
╭────────────────────┬───────────────────────────────────────────╮
│ version │ 0.88.2 │
│ branch │ bsd │
│ commit_hash │ 151edef186 │
│ build_os │ freebsd-x86_64 │
│ build_target │ x86_64-unknown-freebsd │
│ rust_version │ rustc 1.74.1 (a28077b28 2023-12-04) │
│ rust_channel │ stable-x86_64-unknown-freebsd │
│ cargo_version │ cargo 1.74.1 (ecb9851af 2023-10-18) │
│ build_time │ 2023-12-19 10:12:15 +00:00 │
│ build_rust_channel │ debug │
│ allocator │ mimalloc │
│ features │ default, extra, sqlite, trash, which, zip │
│ installed_plugins │ │
╰────────────────────┴───────────────────────────────────────────╯
nushell on bsd [✘!?] is 📦 v0.88.2 via 🦀 v1.74.1
❯ cargo test --workspace commands::ulimit e>> /dev/null | rg ulimit
test commands::ulimit::limit_set_filesize2 ... ok
test commands::ulimit::limit_set_filesize1 ... ok
test commands::ulimit::limit_set_hard1 ... ok
test commands::ulimit::limit_set_hard2 ... ok
test commands::ulimit::limit_set_invalid1 ... ok
test commands::ulimit::limit_set_invalid3 ... ok
test commands::ulimit::limit_set_invalid4 ... ok
test commands::ulimit::limit_set_invalid5 ... ok
test commands::ulimit::limit_set_soft2 ... ok
test commands::ulimit::limit_set_soft1 ... ok
nushell on bsd [✘!?] is 📦 v0.88.2 via 🦀 v1.74.1
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
this PR is two-fold
- make `use` and `overlay use` use the same completion algorithm in
48f29b633
- list directory modules in completions of both with 402acde5c
# User-Facing Changes
i currently have the following in my `NU_LIB_DIRS`
<details>
<summary>click to see the script</summary>
```nushell
for dir in $env.NU_LIB_DIRS {
print $dir
print (ls $dir --short-names | select name type)
}
```
</details>
```
/home/amtoine/.local/share/nupm/modules
#┬────────name────────┬type
0│nu-git-manager │dir
1│nu-git-manager-sugar│dir
2│nu-hooks │dir
3│nu-scripts │dir
4│nu-themes │dir
5│nupm │dir
─┴────────────────────┴────
/home/amtoine/.config/nushell/overlays
#┬──name──┬type
0│ocaml.nu│file
─┴────────┴────
```
> **Note**
> all the samples below are run from the Nushell repo, i.e. a directory
with a `toolkit.nu` module
## before the changes
- `use` would give me `["ocaml.nu", "toolkit.nu"]`
- `overlay use` would give me `[]`
## after the changes
both commands give me
```nushell
[
"nupm/",
"ocaml.nu",
"toolkit.nu",
"nu-scripts/",
"nu-git-manager/",
"nu-git-manager-sugar/",
]
```
# Tests + Formatting
- adds a new `directory_completion/mod.nu` to the completion fixtures
- make sure `source-env`, `use` and `overlay-use` are all tested in the
_dotnu_ test
- fix all the other tests that use completions in the fixtures directory
for completions
# After Submitting
fix on android/termux fails to cd into /sdcard or any directory that
user has access via group
fixes#8095
I am not aware how this works on other platform so feel free to modify
this pr or even close it if it is not correct
# Description
on android or on linux to check if the user belongs to given directory
group, use `libc::getgroups` function
# User-Facing Changes
NA
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.16.24
to 1.16.25.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.16.25</h2>
<h2>[1.16.25] - 2023-12-13</h2>
<h3>Fixes</h3>
<ul>
<li>Have correction in <code>extend-words</code> match the original
word's case</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.16.25] - 2023-12-13</h2>
<h3>Fixes</h3>
<ul>
<li>Have correction in <code>extend-words</code> match the original
word's case</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="5bd389de71"><code>5bd389d</code></a>
chore: Release</li>
<li><a
href="8dbecf3e45"><code>8dbecf3</code></a>
docs: Update changelog</li>
<li><a
href="f8f8c6edf1"><code>f8f8c6e</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/884">#884</a>
from epage/custom</li>
<li><a
href="55d802d0ef"><code>55d802d</code></a>
fix(dict): Mirror original case for custom dict</li>
<li><a
href="86c4c9fb4a"><code>86c4c9f</code></a>
test(cli): Add reproduction case</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.16.24...v1.16.25">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR is basically a copy of #10986 by @CAD97, which made
`$env.PROMPT_COMMAND` only run once per prompt, but @fdncred found an
issue where hitting Enter would make the transient prompt appear and be
immediately overwritten by the regular prompt, so it was
[reverted](https://github.com/nushell/nushell/pull/11340).
https://github.com/nushell/nushell/pull/10788 was also made to do the
same thing as #10986 but that ended up having the same issue. For some
reason, this branch doesn't have that problem, although I haven't
figured out why yet.
@CAD97, if you have any inputs or want to make your own PR, let me know.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
When hitting enter, the prompt shouldn't blink in place anymore.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
`Value::MatchPattern` implies that `MatchPattern`s are first-class
values. This PR removes this case, and commands must now instead use
`Expr::MatchPattern` to extract `MatchPattern`s just like how the
`match` command does using `Expr::MatchBlock`.
# User-Facing Changes
Breaking API change for `nu_protocol` crate.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Fixes#11260
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Note: my issue description was a bit wrong. Issue one can't be
reproduced without a config (`shell_integration` isn't on by default,
so..), however the issue itself is still valid
For issue 1, the default prompt needs to know about the
`shell_integration` config, and the markers are added around the default
prompt when that's on.
For issue 2, this is actually related to transient prompts. When
rendering, the markers weren't added like for normal prompts.
After the fix the output do now contain the proper markers:
Reproducing the minimum config here for convenience:
```nu
$env.config = {
show_banner: false
shell_integration: true
}
# $env.PROMPT_COMMAND = {|| "> " }
```
For issue 1, the output looks like:
```
[2.3490236,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\/home/steven\u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:31:58 PM\u001b8\u001b[0m\u001b[0m\u001b[1;36mecho\u001b[0m\u001b7\u001b8\u001b[?25h"]
[2.5676293,"o","\u001b[6n"]
[2.571353,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\\u001b]133;A\u001b\\/home/steven\u001b]133;B\u001b\\\u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:31:59 PM\u001b8\u001b[0m\u001b[0m\u001b[1;36mecho\u001b[0m\u001b7\u001b8\u001b[?25h\u001b[21;1H\r\n\u001b[21;1H"]
[2.571436,"o","\u001b[?2004l"]
[2.5714657,"o","\u001b]133;C\u001b\\"]
```
in line 3, where enter is pressed, `133 A` and `B` are present.
Same for issue 2 (uncomment the `PROMPT_COMMAND` line in the config):
```
[1.9585224,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\> \u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:32:15 PM\u001b8\u001b[0m\u001b[0m\u001b[1;36mecho\u001b[0m\u001b7\u001b8\u001b[?25h"]
[2.453972,"o","\u001b[6n"]
[2.4585786,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\\u001b]133;A\u001b\\> \u001b]133;B\u001b\\\u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:32:15 PM\u001b8\u001b[0m\u001b[0m\u001b[1;36mecho\u001b[0m\u001b7\u001b8\u001b[?25h\u001b[21;1H\r\n\u001b[21;1H\u001b[?2004l\u001b]133;C\u001b\\\r\n\u001b]133;D;0\u001b\\\u001b]7;file://Aostro-5468/home/steven\u001b\\\u001b]2;~\u0007\u001b[?1l"]
[2.4669976,"o","\u001b[?2004h\u001b[6n"]
[2.4703515,"o","\u001b[6n"]
[2.4736586,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\> \u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:32:15 PM\u001b8\u001b[0m\u001b[0m\u001b7\u001b8\u001b[?25h"]
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None user facing changes other than that prompt markers are working
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This pr allow us to use `filesize` type as a valid limit value, which is
benefit for some file size based limits.
# User-Facing Changes
```console
/data/source/nushell> ulimit -f
╭───┬─────────────────────────────────────────────────────┬───────────┬───────────╮
│ # │ description │ soft │ hard │
├───┼─────────────────────────────────────────────────────┼───────────┼───────────┤
│ 0 │ Maximum size of files created by the shell (kB, -f) │ unlimited │ unlimited │
╰───┴─────────────────────────────────────────────────────┴───────────┴───────────╯
/data/source/nushell> ulimit -f 10Mib
/data/source/nushell> ulimit -f
╭───┬─────────────────────────────────────────────────────┬───────┬───────╮
│ # │ description │ soft │ hard │
├───┼─────────────────────────────────────────────────────┼───────┼───────┤
│ 0 │ Maximum size of files created by the shell (kB, -f) │ 10240 │ 10240 │
╰───┴─────────────────────────────────────────────────────┴───────┴───────╯
/data/source/nushell> ulimit -n
╭───┬──────────────────────────────────────────────┬──────┬────────╮
│ # │ description │ soft │ hard │
├───┼──────────────────────────────────────────────┼──────┼────────┤
│ 0 │ Maximum number of open file descriptors (-n) │ 1024 │ 524288 │
╰───┴──────────────────────────────────────────────┴──────┴────────╯
/data/source/nushell> ulimit -n 10Mib
Error: nu:🐚:type_mismatch
× Type mismatch.
╭─[entry #5:1:1]
1 │ ulimit -n 10Mib
· ─┬─
· ╰── filesize is not compatible with resource RLIMIT_NOFILE
╰────
```
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [x] add `commands::ulimit::limit_set_filesize1`
- [x] add `commands::ulimit::limit_set_filesize2`
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# Description
This PR allows `int` type as a valid limit value for `ulimit`, so there
is no need to use `into string` to convert limit values in the tests.
# User-Facing Changes
N/A
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [x] add `commands::ulimit::limit_set_invalid3`
- [x] add `commands::ulimit::limit_set_invalid4`
- [x] add `commands::ulimit::limit_set_invalid5`
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
moonlander pointed out in Discord that the transient prompt feature
added in release 0.86 (implemented in #10391) is causing the normal
prompt to be redrawn when the transient prompt variables are unset or
set to null. This PR is for fixing that, although it's more of a bandaid
fix. Maybe the transient prompt feature should be taken out entirely for
now so more thought can be given to its implementation.
Previously, I'd thought that when reedline redraws the prompt after a
command is entered, it's a whole new prompt, but apparently it's
actually the same prompt as the current line (?). So now, `nu_prompt` in
`repl.rs` is an `Arc<RwLock<NushellPrompt>>` (rather than just a
`NushellPrompt`), and this `Arc` is shared with the `TransientPrompt`
object so that if it can't find one of the `TRANSIENT_PROMPT_*`
variables, it uses a segment from `NushellPrompt` rather than
re-evaluate `PROMPT_COMMAND`, `PROMPT_COMMAND_RIGHT`, etc. Using an
`RwLock` means that there's a bunch of `.expect()`s all over the place,
which is not nice. It could perhaps be avoided with some changes on the
reedline side.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`$env.PROMPT_COMMAND` (and other such variables) should no longer be
executed twice if the corresponding `$env.TRANSIENT_PROMPT_*` variable
is not set.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# Steps to reproduce
Described by moonlander in Discord
[here](https://discord.com/channels/601130461678272522/614593951969574961/1164928022126792844).
Adding this to `env.nu` will result in `11` being added to
`/tmp/run_count` every time any command is run. The expected behavior is
a single `1` being added to `/tmp/run_count` instead of two. The prompt
command should not be executed again when the prompt is redrawn after a
command is executed.
```nu
$env.PROMPT_COMMAND = {||
touch /tmp/run_count
'1' | save /tmp/run_count --append
'>'
}
# $env.TRANSIENT_PROMPT_COMMAND not set
```
If the following is added to `env.nu`, then `12` will be added to
`/tmp/run_count` every time any command is run, which is expected
behavior because the normal prompt command must be displayed the first
time the prompt is shown, then the transient prompt command is run when
the prompt is redrawn.
```nu
$env.TRANSIENT_PROMPT_COMMAND = {||
touch /tmp/run_count
'2' | save /tmp/run_count --append
'>'
}
```
Here's a screenshot of what adding that first snippet looks like (`cargo
run` in the `main` branch):
Here's a screenshot of what it looks like with this PR (only one `1` is
added to `/tmp/run_count` each time):
Reverts nushell/nushell#10986
@CAD97 This isn't working right. I have a 2 line prompt with a transient
prompt. on enter, you see the transient prompt drawn and then the normal
prompt overwrites it.
# Description
This PR updates to the latest reedline main branch which includes
reedline 27.1 and reedline PR
https://github.com/nushell/reedline/pull/675 for better resize behavior.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Hi! A few days ago I changed the hover from `--ide-lsp` to match `help`
#11284, now this PR is doing the same but for the new `--lsp` server
I also did some tiny fixes to syntax, with some clippy `pedantic` lints
# User-Facing Changes
# Tests + Formatting
✅ ran `toolkit check pr`
# Description
If `$env.TRANSIENT_PROMPT_COMMAND` is not set, use the prompt created by
`$env.PROMPT_COMMAND` instead of running the command a second time. As a
side effect, `$env.TRANSIENT_PROMPT_COMMAND` now runs after the hooks
`pre_prompt` and `env_change`, instead of before.
# User-Facing Changes
- `$env.PROMPT_COMMAND` gets run only once per prompt instead of twice
- `$env.TRANSIENT_PROMPT_COMMAND` now sees any environment set in a
`pre_prompt` or `env_change` hook, like `$env.PROMPT_COMMAND` does
# Description
Add `ulimit` command to Nushell.
Closes#9563Closes#3976
Related pr #11246
Reference:
https://github.com/fish-shell/fish-shell/blob/master/fish-rust/src/builtins/ulimit.rshttps://github.com/mirror/busybox/blob/master/shell/shell_common.c#L529
# User-Facing Changes
```
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1 [3/246]
❯ ulimit -a
╭────┬──────────────────────────────────────────────────────────────────────────┬───────────┬───────────╮
│ # │ description │ soft │ hard │
├────┼──────────────────────────────────────────────────────────────────────────┼───────────┼───────────┤
│ 0 │ Maximum size of core files created (kB, -c) │ unlimited │ unlimited │
│ 1 │ Maximum size of a process's data segment (kB, -d) │ unlimited │ unlimited │
│ 2 │ Controls of maximum nice priority (-e) │ 0 │ 0 │
│ 3 │ Maximum size of files created by the shell (kB, -f) │ unlimited │ unlimited │
│ 4 │ Maximum number of pending signals (-i) │ 55273 │ 55273 │
│ 5 │ Maximum size that may be locked into memory (kB, -l) │ 8192 │ 8192 │
│ 6 │ Maximum resident set size (kB, -m) │ unlimited │ unlimited │
│ 7 │ Maximum number of open file descriptors (-n) │ 1024 │ 524288 │
│ 8 │ Maximum bytes in POSIX message queues (kB, -q) │ 800 │ 800 │
│ 9 │ Maximum realtime scheduling priority (-r) │ 0 │ 0 │
│ 10 │ Maximum stack size (kB, -s) │ 8192 │ unlimited │
│ 11 │ Maximum amount of CPU time in seconds (seconds, -t) │ unlimited │ unlimited │
│ 12 │ Maximum number of processes available to the current user (-u) │ 55273 │ 55273 │
│ 13 │ Maximum amount of virtual memory available to each process (kB, -v) │ unlimited │ unlimited │
│ 14 │ Maximum number of file locks (-x) │ unlimited │ unlimited │
│ 15 │ Maximum contiguous realtime CPU time (-y) │ unlimited │ unlimited │
╰────┴──────────────────────────────────────────────────────────────────────────┴───────────┴───────────╯
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1
❯ ulimit -s
╭───┬─────────────────────────────┬──────┬───────────╮
│ # │ description │ soft │ hard │
├───┼─────────────────────────────┼──────┼───────────┤
│ 0 │ Maximum stack size (kB, -s) │ 8192 │ unlimited │
╰───┴─────────────────────────────┴──────┴───────────╯
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1
❯ ulimit -s 100
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1
❯ ulimit -s
╭───┬─────────────────────────────┬──────┬──────╮
│ # │ description │ soft │ hard │
├───┼─────────────────────────────┼──────┼──────┤
│ 0 │ Maximum stack size (kB, -s) │ 100 │ 100 │
╰───┴─────────────────────────────┴──────┴──────╯
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1
```
# Tests + Formatting
- [x] add commands::ulimit::limit_set_soft1
- [x] add commands::ulimit::limit_set_soft2
- [x] add commands::ulimit::limit_set_hard1
- [x] add commands::ulimit::limit_set_hard2
- [x] add commands::ulimit::limit_set_invalid1
- [x] add commands::ulimit::limit_set_invalid2
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# Description
Since there are plans to add more history commands, it seems sensible to
put them into their own module and category
https://github.com/nushell/nushell/pull/10440#issuecomment-1731408785
# User-Facing Changes
The history commands are in the category "History" rather than "Misc"
should
- close https://github.com/nushell/nushell/issues/11133
# Description
to allow more freedom when writing complex modules, we are disabling the
auto-export of director modules.
the change was as simple as removing the crawling of files and modules
next to any `mod.nu` and update the standard library.
# User-Facing Changes
users will have to explicitely use `export module <mod>` to define
submodules and `export use <mod> <cmd>` to re-export definitions, e.g.
```nushell
# my-module/mod.nu
export module foo.nu # export a submodule
export use bar.nu bar-1 # re-export an internal command
export def top [] {
print "`top` from `mod.nu`"
}
```
```nushell
# my-module/foo.nu
export def "foo-1" [] {
print "`foo-1` from `lib/foo.nu`"
}
export def "foo-2" [] {
print "`foo-2` from `lib/foo.nu`"
}
```
```nushell
# my-module/bar.nu
export def "bar-1" [] {
print "`bar-1` from `lib/bar.nu`"
}
```
# Tests + Formatting
i had to add `export module` calls in the `tests/modules/samples/spam`
directory module and allow the `not_allowed` module to not give an
error, it is just empty, which is fine.
# After Submitting
- mention in the release note
- update the following repos
```
#┬─────name─────┬version┬─type─┬─────────repo─────────
0│nu-git-manager│0.4.0 │module│amtoine/nu-git-manager
1│nu-scripts │0.1.0 │module│amtoine/scripts
2│nu-zellij │0.1.0 │module│amtoine/zellij-layouts
3│nu-scripts │0.1.0 │module│nushell/nu_scripts
4│nupm │0.1.0 │module│nushell/nupm
─┴──────────────┴───────┴──────┴──────────────────────
```
Second attempt at polars Struct support. This version avoid using unsafe
checks by cloning the StructArray and utilizing the into_static to
convert to a StructOwned.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.16.23
to 1.16.24.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.16.24</h2>
<h2>[1.16.24] - 2023-12-08</h2>
<h3>Fixes</h3>
<ul>
<li>Don't silently ignore config when there is an error in a field</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.16.24] - 2023-12-08</h2>
<h3>Fixes</h3>
<ul>
<li>Don't silently ignore config when there is an error in a field</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="548ac37a5d"><code>548ac37</code></a>
chore: Release</li>
<li><a
href="a838b1820f"><code>a838b18</code></a>
chore: Release</li>
<li><a
href="44e4455f33"><code>44e4455</code></a>
docs: Update changelog</li>
<li><a
href="4362a6e5e4"><code>4362a6e</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/882">#882</a>
from epage/regex</li>
<li><a
href="1b92c0182c"><code>1b92c01</code></a>
fix(config): Propagate validation errors</li>
<li><a
href="632b256901"><code>632b256</code></a>
test: Demonstrate bad config bug</li>
<li><a
href="8dec26e3c6"><code>8dec26e</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/879">#879</a>
from epage/update</li>
<li><a
href="69f4b1eaff"><code>69f4b1e</code></a>
chore: Move off deprecated</li>
<li><a
href="cb9b485bd3"><code>cb9b485</code></a>
chore: Update from '_rust/main'</li>
<li><a
href="8c836eaa9d"><code>8c836ea</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/10">#10</a> from
epage/renovate/migrate-config</li>
<li>Additional commits viewable in <a
href="https://github.com/crate-ci/typos/compare/v1.16.23...v1.16.24">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This updates all the positional arguments (except with
`--features=dataframe` or `--features=extra`) to start with an uppercase
letter and end with a period.
Part of #5066, specifically [this
comment](/nushell/nushell/issues/5066#issuecomment-1421528910)
Some arguments had example data removed from them because it also
appears in the examples.
There are other inconsistencies in positional arguments I noticed while
making the tests pass which I will bring up in #5066.
# User-Facing Changes
Positional arguments are now consistent
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Automatic documentation updates
# Description
Fixes: #11295
Sorry for introducing such issue.
The issue is caused by we wrongly set `redirect_stdout` and
`redirect_stderr` during eval, take the following as example:
```nushell
ls | bat --paging always
```
When running `bat --paging always`, `redirect_stdout` should be `false`.
But before this pr, it's set to true due to `ls` command, and then the
`true` value will go to all remaining commands.
# User-Facing Changes
NaN
# Tests + Formatting
Sorry I don't think we have a way to test it. Because it needs to be
tested on interactive command like `nvim`.
# After Submitting
NaN
# Description
Running `cargo install nu` on rustc 1.71.1 (eb26296b5 2023-08-03)
produced the following error message when reaching `nu-command v0.88.0`:
```sh
error[E0659]: `open` is ambiguous
--> /home/antoine/.cargo/registry/src/index.crates.io-6f17d22bba15001f/nu-command-0.88.0/src/stor/mod.rs:30:9
|
30 | pub use open::StorOpen;
| ^^^^ ambiguous name
|
= note: ambiguous because of multiple potential import sources
= note: `open` could refer to a crate passed with `--extern`
= help: use `::open` to refer to this crate unambiguously
note: `open` could also refer to the module defined here
--> /home/antoine/.cargo/registry/src/index.crates.io-6f17d22bba15001f/nu-command-0.88.0/src/stor/mod.rs:12:1
|
12 | mod open;
| ^^^^^^^^^
= help: use `self::open` to refer to this module unambiguously
Compiling nu-cli v0.88.0
Compiling nu-lsp v0.88.0
For more information about this error, try `rustc --explain E0659`.
error: could not compile `nu-command` (lib) due to previous error
warning: build failed, waiting for other jobs to finish...
error: failed to compile `nu v0.88.0`, intermediate artifacts can be found at `/tmp/cargo-installEUsfIr`
```
# User-Facing Changes
No user-facing changes.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
