It is a common pattern to add message to assert.
Also the error message was not so helpful. (See the difference in the
documentation)
---------
Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
# Description
This fixes up some clippy warnings and removes some old names/info from
our unit tests
# User-Facing Changes
Internal changes only
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Prior to this PR, `ls` would return `nothing` in an empty directory.
After this PR, it returns an empty `List`. This makes the behaviour of
`ls` more consistent and easier to reason about (IMO).
This was prompted by a user noticing that `ls | where size == 0KB and
type == file` breaks when run in an empty directory:
```
× Input type not supported.
╭─[entry #12:1:1]
1 │ ls | where size == 0KB and type == file
· ─┬ ──┬──
· │ ╰── only list, binary, raw data or range input data is supported
· ╰── input type: nothing
╰────
```
If people agree with this change, let's wait until after the 0.77
release so we have a bit more time to test it.
# Description
The correction made here concerns the issue #8431. Indeed, the algorithm
initially proposed to remove elements of a `vector` performed a loop
with `remove` and an incident therefore appeared when several values
were equal because the deletion was done outside the length of the
vector:
```rust
let mut found = false;
for (i, col) in cols.clone().iter().enumerate() {
if col == col_name {
cols.remove(i);
vals.remove(i);
found = true;
}
}
```
Then, `[[a, a]; [1, 2]] | reject a: ` gave `thread 'main' panicked at
'removal index (is 1) should be < len (is 1)',
crates/nu-protocol/src/value/mod.rs:1213:54`.
The proposed correction is therefore the implementation of the
`retain_mut` utility dedicated to this functionality.
```rust
let mut found = false;
let mut index = 0;
cols.retain_mut(|col| {
if col == col_name {
found = true;
vals.remove(index);
false
} else {
index += 1;
true
}
});
```
# Description
The "CREATE TABLE" statement in `into sqlite` does not add quotes to the
column names, reproduction steps are below:
```
/home/xxx〉[[name,y/n];[a,y]] | into sqlite test.db
Error:
× Failed to prepare SQLite statement
╭─[entry #1:1:1]
1 │ [[name,y/n];[a,y]] | into sqlite test.db
· ───┬───
· ╰── near "/": syntax error in CREATE TABLE IF NOT EXISTS main (name TEXT,y/n TEXT) at offset 44
╰────
```
# User-Facing Changes
None
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
Prevents alias from aliasing itself. It allows a commonly requested
pattern similar to `alias ls = ls -l`.
One small issue is that the syntax highlighting is a bit off:
Fixes https://github.com/nushell/nushell/issues/8246
# User-Facing Changes
Shouldn't be a breaking change.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Our `ShellError` at the moment has a `std::mem::size_of<ShellError>` of
136 bytes (on AMD64). As a result `Value` directly storing the struct
also required 136 bytes (thanks to alignment requirements).
This change stores the `Value::Error` `ShellError` on the heap.
Pro:
- Value now needs just 80 bytes
- Should be 1 cacheline less (still at least 2 cachelines)
Con:
- More small heap allocations when dealing with `Value::Error`
- More heap fragmentation
- Potential for additional required memcopies
# Further code changes
Includes a small refactor of `try` due to a type mismatch in its large
match.
# User-Facing Changes
None for regular users.
Plugin authors may have to update their matches on `Value` if they use
`nu-protocol`
Needs benchmarking to see if there is a benefit in real world workloads.
**Update** small improvements in runtime for workloads with high volume
of values. Significant reduction in maximum resident set size, when many
values are held in memory.
# Tests + Formatting
# Description
This includes the development versions of `reedline` and `nu-ansi-term`
(Interesting to see if there is potential breakage due to a change to
the `Color::default()`)
All other crates are updated to the latest available version.
This change reduces the number of dependencies to compile slightly and
for me on Linux reduced the compile time a few seconds.
# Output from `cargo build --timings`
## `main`
<html><body>
<!--StartFragment-->
Targets: | nu 0.76.1 (bin "nu")
-- | --
Profile: | dev
Fresh units: | 0
Dirty units: | 398
Total units: | 398
Max concurrency: | 16 (jobs=16 ncpu=16)
Build start: | 2023-03-11T18:19:14Z
Total time: | 75.1s (1m 15.1s)
rustc: | rustc 1.66.1 (90743e729 2023-01-10)Host:
x86_64-unknown-linux-gnuTarget: x86_64-unknown-linux-gnu
<!--EndFragment-->
</body>
</html>
## this PR
<html><body>
<!--StartFragment-->
Targets: | nu 0.76.1 (bin "nu")
-- | --
Profile: | dev
Fresh units: | 0
Dirty units: | 392
Total units: | 392
Max concurrency: | 16 (jobs=16 ncpu=16)
Build start: | 2023-03-11T18:21:20Z
Total time: | 69.6s (1m 9.6s)
rustc: | rustc 1.66.1 (90743e729 2023-01-10)Host:
x86_64-unknown-linux-gnuTarget: x86_64-unknown-linux-gnu
<!--EndFragment-->
</body>
</html>
# User-Facing Changes
None intended, none visually detected upon a cursory look around.
# Tests + Formatting
-
# Description
Changes old `from xml` `to xml` data formats. See #7682 for reasoning
behind this change.
Output is now a series of records with `tag`, `attributes` and `content`
fields.
Old:
New:
# User-Facing Changes
New output/input format, better error handling for `from xml` and `to
xml` commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Prototype replacement for `enter`, `n`, `p`, `exit` built-ins
implemented as scripts in standard library.
MVP-level capabilities (rough hack), for feedback please. Not intended
to merge and ship as is.
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
New command in standard library
```nushell
〉use ~/src/rust/nushell/crates/nu-utils/standard_library/dirs.nu
---------------------------------------------- /home/bobhy ----------------------------------------------
〉help dirs
module dirs.nu -- maintain list of remembered directories + navigate them
todo:
* expand relative to absolute paths (or relative to some prefix?)
* what if user does `cd` by hand?
Module: dirs
Exported commands:
add (dirs add), drop, next (dirs next), prev (dirs prev), show (dirs show)
This module exports environment.
---------------------------------------------- /home/bobhy ----------------------------------------------
〉dirs add ~/src/rust/nushell /etc ~/.cargo
-------------------------------------- /home/bobhy/src/rust/nushell --------------------------------------
〉dirs next 2
------------------------------------------- /home/bobhy/.cargo -------------------------------------------
〉dirs show
╭───┬─────────┬────────────────────╮
│ # │ current │ path │
├───┼─────────┼────────────────────┤
│ 0 │ │ /home/bobhy │
│ 1 │ │ ~/src/rust/nushell │
│ 2 │ │ /etc │
│ 3 │ ==> │ ~/.cargo │
╰───┴─────────┴────────────────────╯
------------------------------------------- /home/bobhy/.cargo -------------------------------------------
〉dirs drop
---------------------------------------------- /home/bobhy ----------------------------------------------
〉dirs show
╭───┬─────────┬────────────────────╮
│ # │ current │ path │
├───┼─────────┼────────────────────┤
│ 0 │ ==> │ /home/bobhy │
│ 1 │ │ ~/src/rust/nushell │
│ 2 │ │ /etc │
╰───┴─────────┴────────────────────╯
---------------------------------------------- /home/bobhy ----------------------------------------------
〉
```
# Tests + Formatting
Haven't even looked at stdlib `tests.nu` yet.
Other todos:
* address module todos.
* integrate into std lib, rather than as standalone module. Somehow
arrange for `use .../standard_library/std.nu` to load this module
without having to put all the source in `std.nu`?
* Maybe command should be `std dirs ...`?
* what else do `enter` and `exit` do that this should do? Then deprecate
those commands.
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
i was writing #8148 and came to the "_Test + Formatting_" section of the
PR template.
i felt the developer instructions could be wrapped up in a common easy
to use format, e.g. a `Makefile`, to be used with a few-words command
only, e.g. `make fmt` or `make clippy`, instead of the long commands in
the PR template 🤔
> **Note**
> in case you guys do not want to add a `Makefile` to the `nushell`
source, that PR can be discarded 😌
# Description
this PR
- adds the few rules from the PR template to a new `Makefile`
- replaces the instructions in the PR template from the full commands to
the new `make` rules
# User-Facing Changes
- _none for the regular user_
- i believe easier to test PRs for the developer, allowing one not to
realy on knowing the long commands or using the shell history to run
them again 😋
# Tests + Formatting
_nothing to test_
# After Submitting
maybe mention that in `CONTRIBUTING.md`?
# Description
The `spam` command is not always going to be missing, as is the case
with this sgml tool: https://linux.die.net/man/1/spam
Rename `spam` and `foo` to something more unique so we have a lower
chance of colliding with other names on the system.
fixes#8404
# User-Facing Changes
No impact. This only impacts testing
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This works around a bug introduced by #8058
We should revisit the original fix, as it makes some assumptions about
how stdout redirection is used by `table`. We use the stdout by default
for table regularly during a repl session, so we should instead
special-case case for handling externals.
# User-Facing Changes
Restores the original default `table` behaviour for binary data
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes the crash when handing `{}#.}`
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is a follow-up from https://github.com/nushell/nushell/pull/8173,
which was merged shortly after the 0.76 release. That PR changed
`default_env.nu` so that the user's home folder is displayed as `~` in
the left prompt. It did so using `get -i`.
This PR just rewrites the Nu code from
https://github.com/nushell/nushell/pull/8173 to use `try`/`catch`
instead of `-i`, which will make it easier to remove the `-i` flags from
`get` and `select` eventually (see
https://github.com/nushell/nushell/pull/8379).
I would like to merge this before the 0.77 release, so we don't end up
with lots of `env.nu` files using `get -i` out in the wild.
# Description
In the past, I've seen this test
`takes_rows_of_nu_value_strings_and_pipes_it_to_stdin_of_external` fail
more than a few times. My only guess was that running external commands
in a cross-platform way can be tricky. This is the main reason we have
some `--testbin` commands, to avoid this situation. With that in mind,
this removes the `^echo` command from this one test and replaces it with
`nu --testbin cococo`, which I believe is our equivalent of echo.
Please comment below if you think this is the wrong strategy. There are
other `^echo` tests but I'm not sure if we can change all of them.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
A tiny fix: make the naming of the `sqlite` feature consistent across
both `Cargo.toml` and the `version` command's output. Previously
`version` displayed it as `database`, a user was asking about that the
other day.
# Description
in https://github.com/nushell/nushell/issues/8311 and the discord
server, the idea of moving the default banner from the `rust` source to
the `nushell` standar library has emerged 😋
however, in order to do this, one need to have access to all the
variables used in the default banner => all of them are accessible
because known constants, except for the startup time of the shell, which
is not anywhere in the shell...
#### this PR adds exactly this, i.e. the new `startup_time` to the `$nu`
variable, which is computed to have the exact same value as the value
shown in the banner.
## the changes
in order to achieve this, i had to
- add `startup_time` as an `i64` to the `EngineState` => this is, to the
best of my knowledge, the easiest way to pass such an information around
down to where the banner startup time is computed and where the `$nu`
variable is evaluated
- add `startup-time` to the `$nu` variable and use the `EngineState`
getter for `startup_time` to show it as a `Value::Duration`
- pass `engine_state` as a `&mut`able argument from `main.rs` down to
`repl.rs` to allow the setter to change the value of `startup_time` =>
without this, the value would not change and would show `-1ns` as the
default value...
- the value of the startup time is computed in `evaluate_repl` in
`repl.rs`, only once at the beginning, and the same value is used in the
default banner 👌
# User-Facing Changes
one can now access to the same time as shown in the default banner with
```bash
$nu.startup-time
```
# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🟢 `cargo test --workspace`
# After Submitting
```
$nothing
```
# Description
Fixes#8245. Instead of trying to use `nano` or `notepad` as defaults,
it errors out if finds that `buffer_editor` , $EDITOR, $VISUAL do not
exist.
If the PR is landed, Ill update the website as it means what its in
there is no longer correct.
```
❯ config nu
Error:
× No editor configured
╭─[entry #3:1:1]
1 │ config nu
· ────┬────
· ╰── Please specify one via environment variables $EDITOR or $VISUAL
╰────
help: Nushell's config file can be found with the command: $nu.config-path. For more help: (https://nushell.sh/book/configuration.html#configurations-with-built-in-commands)
```
# User-Facing Changes
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.
This reverts https://github.com/nushell/nushell/pull/8114 which upgraded
to `notify` (a file watching crate used by the `watch` command) v5.
`notify` v5 has several breaking changes and it's much harder to use. It
no longer includes debouncing of file system events, which I think is
essential functionality for `watch`. @WindSoilder was going to try
writing our own debouncing functionality but I don't think he had time
to finish it.
@WindSoilder Is it OK if we revert this for the 0.77 release (March 14)?
We can try again for 0.78
Add two rows in `$nu`, `$nu.is-interactive` and `$nu.is-login`, which
are true when nu is run in interactive and login mode respectively.
The `-i` flag now behaves a bit more like that of bash's, where the any
provided command or file is run without REPL but in "interactive mode".
This should entail sourcing interactive-mode config files, but since we
are planning on overhauling the config system soon, I'm holding off on
that. For now, all `-i` does is set `$nu.is-interactive` to be true.
About testing, I can't seem to find where cli-args get tested, so I
haven't written any new tests for this. Also I don't think there are any
docs that need updating. However if I'm wrong please tell me.
# Description
Hides https://github.com/nushell/nushell/pull/7925 from config and
disables by default. Option is still present in config, just hidden.
# User-Facing Changes
Users can no longer find `table.show_empty` in config and it is set to
false by default.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes an error message that popped up after landing a PR #8337.
I guess there were too many changes since the PR was submitted?
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
this PR adds the `path add` command to
`crates/nu-utils/standard_library/std.nu`
- this comes from frequent questions over on the discord server, about
how to add directories to the `PATH`
- this is greatly inspired from the [original
`path-add`](https://discord.com/channels/601130461678272522/615253963645911060/1081206660816699402)
from @melMass
- allows to prepend and append a variable number of directories to the
`PATH`
- i've added a description with an example
- i've added tests in `crates/nu-utils/standard_library/tests.nu` that
hopefully covers all the features
# User-Facing Changes
`path add` can now be used from `std.nu`
# Tests + Formatting
the tests pass with
```bash
nu crates/nu-utils/standard_library/tests.nu
```
# After Submitting
```bash
$nothing
```
# Description
Fix for data ambiguity noted in #8244.
Basic change is to use nanosecond resolution for unix timestamps (stored
in type Int). Previously, a timestamp might have seconds, milliseconds
or nanoseconds, but it turned out there were overlaps in data ranges
between different resolutions, so there wasn't always a unique mapping
back to date/time.
Due to higher precision, the *range* of dates that timestamps can map to
is restricted. Unix timestamps with seconds resolution and 64 bit
storage can cover all dates from the Big Bang to eternity. Timestamps
with seconds resolution and 32 bit storage can only represent dates from
1901-12-13 through 2038-01-19. The nanoseconds resolution and 64 bit
storage used with this fix can represent dates from 1677-09-21T00:12:44
to 2262-04-11T23:47:16, something of a compromise.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
## `<datetime> | into int`
Converts to nanosecond resolution
```rust
〉date now | into int
1678084730502126846
```
This is the number of non-leap nanoseconds after the unix epoch date:
1970-01-01T00:00:00+00:00.
Conversion fails for dates outside the supported range:
```rust
〉1492-10-12 | into int
Error: nu:🐚:incorrect_value
× Incorrect value.
╭─[entry #51:1:1]
1 │ 1492-10-12 | into int
· ────┬───
· ╰── DateTime out of timestamp range 1677-09-21T00:12:43 and 2262-04-11T23:47:16
╰────
```
## `<int> | into datetime`
Can no longer fail or produce incorrect results for any 64-bit input:
```rust
〉0 | into datetime
Thu, 01 Jan 1970 00:00:00 +0000 (53 years ago)
〉"7fffffffffffffff" | into int -r 16 | into datetime
Fri, 11 Apr 2262 23:47:16 +0000 (in 239 years)
〉("7fffffffffffffff" | into int -r 16) * -1 | into datetime
Tue, 21 Sep 1677 00:12:43 +0000 (345 years ago)
```
## `<date> | date to-record` and `<date> | date to-table`
Now both have a `nanosecond` field.
```rust
〉"7fffffffffffffff" | into int -r 16 | into datetime | date to-record
╭────────────┬───────────╮
│ year │ 2262 │
│ month │ 4 │
│ day │ 11 │
│ hour │ 23 │
│ minute │ 47 │
│ second │ 16 │
│ nanosecond │ 854775807 │
│ timezone │ +00:00 │
╰────────────┴───────────╯
〉"7fffffffffffffff" | into int -r 16 | into datetime | date to-table
╭───┬──────┬───────┬─────┬──────┬────────┬────────┬────────────┬──────────╮
│ # │ year │ month │ day │ hour │ minute │ second │ nanosecond │ timezone │
├───┼──────┼───────┼─────┼──────┼────────┼────────┼────────────┼──────────┤
│ 0 │ 2262 │ 4 │ 11 │ 23 │ 47 │ 16 │ 854775807 │ +00:00 │
╰───┴──────┴───────┴─────┴──────┴────────┴────────┴────────────┴──────────╯
```
This change was not mandated by the OP problem, but it is nice to be
able to see the nanosecond bits that were present in Nushell `date` type
all along.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
i tried yesterday to `encode` with an invalid character set and this is
what i got
```bash
>_ {alg: "HS256", type: "JWT"} | to json -r | encode base64 --character-set invalid-character-set
Error:
× value is not an accepted character set
╭─[entry #11:1:1]
1 │ {alg: "HS256", type: "JWT"} | to json -r | encode base64 --character-set invalid-character-set
· ──────────┬──────────
· ╰── invalid-character-set is not a valid character-set.
Please use `help hash base64` to see a list of valid character sets.
╰────
```
but `hash base64` is now a deprecated command, see `help hash base64`.
=> **this PR changes the error message to mention `help encode base64`,
where the list of valid character sets is, instead**
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🟢 `cargo test --workspace`
# After Submitting
```
$nothing
```
This PR adds tests to confirm that:
1. `http get` does the right thing (bail) when it encounters common SSL
errors
2. the `--insecure` flag works to ignore SSL errors
It's prompted by #8098, where `--insecure` stopped working and we didn't
notice until it was reported by a user.
## Deets + considerations
This PR uses [badssl.com](https://badssl.com/), a very handy website
affiliated with the Google Chrome team. The badssl authors mention that
stability is not guaranteed:
> Most subdomains are likely to have stable functionality, but anything
could change without notice.
I suspect that the badssl.com subdomains I've chosen will be stable
enough in practice. Can revisit this if the tests end up being flaky.
This PR does mean our tests are now making an external network call...
which I _think_ is OK. Our CI isn't exactly designed for offline
machines; test runners already have to download a bunch of crates etc. I
think the new tests are quick enough:
Fixes#8341.
The `CustomValue::to_json()` function is an odd duck; it defaults to
returning `null`, and no `CustomValue` implementations override it to do
anything useful. I forgot to implement `to_json()` for `SQLiteDatabase`,
so `open foo.db | to json` was returning `null`.
To fix this, I've removed `CustomValue::to_json()` and now `to json`
will collect a `CustomValue` into a regular `Value` before doing a JSON
conversion.
Continuation of #8229 and #8326
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
# Call to action
**Everyone:** Feel free to add review comments if you spot inconsistent
use of `ShellError` variants.
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
# Commits (so far)
- Remove `ShellError::FeatureNotEnabled`
- Name fields on `SE::ExternalNotSupported`
- Name field on `SE::InvalidProbability`
- Name fields on `SE::NushellFailed` variants
- Remove unused `SE::NushellFailedSpannedHelp`
- Name field on `SE::VariableNotFoundAtRuntime`
- Name fields on `SE::EnvVarNotFoundAtRuntime`
- Name fields on `SE::ModuleNotFoundAtRuntime`
- Remove usused `ModuleOrOverlayNotFoundAtRuntime`
- Name fields on `SE::OverlayNotFoundAtRuntime`
- Name field on `SE::NotFound`
startup nushell with no config file or env file...
This PR gives the ability to start up nushell easily with no config or
env config files
simply by passing in
```rust
nu -n
```
or
```rust
nu --no-config-file
```
A bonus is that startup times for nushell decreases FIVE fold...
From about > 50ms to less than < 10ms on average on my mac
This will enable Part II which will hopefully be the ability to
to send this flag into the nu! macro and turn off loading of the config
files...
Remember when config files are enabled the nu-cmd-lang tests fail
because the
commands in the config files are a superset of the commands in
nu-cmd-lang...
In my preliminary tests before by zeroing out the config files the
nu-cmd-lang tests passed...
Independent of the cratification efforts I have always wanted a way
anyway to turn off loading
the config files when starting up nushell... So this accomplishes that
task...
Continuation of #8229
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
**Everyone:** Feel free to add review comments if you spot inconsistent
use of `ShellError` variants.
- Name fields of `SE::IncorrectValue`
- Merge and name fields on `SE::TypeMismatch`
- Name fields on `SE::UnsupportedOperator`
- Name fields on `AssignmentRequires*` and fix doc
- Name fields on `SE::UnknownOperator`
- Name fields on `SE::MissingParameter`
- Name fields on `SE::DelimiterError`
- Name fields on `SE::IncompatibleParametersSingle`
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
Bumps [rust-embed](https://github.com/pyros2097/rust-embed) from 6.4.1
to 6.6.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pyrossh/rust-embed/blob/master/changelog.md">rust-embed's
changelog</a>.</em></p>
<blockquote>
<h2>[6.6.0] - 2023-03-05</h2>
<ul>
<li>sort_by_file_name() requires walkdir v2.3.2 <a
href="https://github-redirect.dependabot.com/pyrossh/rust-embed/issues/206">#206</a></li>
<li>Add <code>mime-guess</code> feature to statically store mimetype <a
href="https://github-redirect.dependabot.com/pyrossh/rust-embed/issues/192">#192</a></li>
</ul>
<h2>[6.4.2] - 2022-10-20</h2>
<ul>
<li>Fail the proc macro if include/exclude are used without the feature
<a
href="https://github-redirect.dependabot.com/pyrossh/rust-embed/issues/187">#187</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/pyros2097/rust-embed/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [rayon](https://github.com/rayon-rs/rayon) from 1.6.1 to 1.7.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rayon-rs/rayon/blob/master/RELEASES.md">rayon's
changelog</a>.</em></p>
<blockquote>
<h1>Release rayon 1.7.0 / rayon-core 1.11.0 (2023-03-03)</h1>
<ul>
<li>The minimum supported <code>rustc</code> is now 1.59.</li>
<li>Added a fallback when threading is unsupported.</li>
<li>The new <code>ParallelIterator::take_any</code> and
<code>skip_any</code> methods work like
unordered <code>IndexedParallelIterator::take</code> and
<code>skip</code>, counting items in
whatever order they are visited in parallel.</li>
<li>The new <code>ParallelIterator::take_any_while</code> and
<code>skip_any_while</code> methods work
like unordered <code>Iterator::take_while</code> and
<code>skip_while</code>, which previously had
no parallel equivalent. The "while" condition may be satisfied
from anywhere
in the parallel iterator, affecting all future items regardless of
position.</li>
<li>The new <code>yield_now</code> and <code>yield_local</code>
functions will cooperatively yield
execution to Rayon, either trying to execute pending work from the
entire
pool or from just the local deques of the current thread,
respectively.</li>
</ul>
<h1>Release rayon-core 1.10.2 (2023-01-22)</h1>
<ul>
<li>Fixed miri-reported UB for SharedReadOnly tags protected by a
call.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="7ffaf3463b"><code>7ffaf34</code></a>
Merge <a
href="https://github-redirect.dependabot.com/rayon-rs/rayon/issues/716">#716</a></li>
<li><a
href="163003e0e3"><code>163003e</code></a>
bump the release date</li>
<li><a
href="f7d75532fc"><code>f7d7553</code></a>
Release rayon 1.3.0 / rayon-core 1.7.0</li>
<li><a
href="b98bb23f05"><code>b98bb23</code></a>
Remove unneeded extern crate statements</li>
<li><a
href="9b92c7deb9"><code>9b92c7d</code></a>
cargo fmt</li>
<li><a
href="e02f439bbf"><code>e02f439</code></a>
Remove useless 'use crate;' in favor of the crate prelude</li>
<li><a
href="a1db0fe390"><code>a1db0fe</code></a>
Fix clippy::flat_map_identity</li>
<li><a
href="4e4025693f"><code>4e40256</code></a>
Update ci/compat-Cargo.lock</li>
<li><a
href="1f9d117d51"><code>1f9d117</code></a>
Remove cfg(rayon_unstable)</li>
<li><a
href="198ca7f6aa"><code>198ca7f</code></a>
Remove rayon-futures</li>
<li>Additional commits viewable in <a
href="https://github.com/rayon-rs/rayon/compare/rayon-core-v1.6.1...rayon-core-v1.7.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [tempfile](https://github.com/Stebalien/tempfile) from 3.3.0 to
3.4.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Stebalien/tempfile/blob/master/NEWS">tempfile's
changelog</a>.</em></p>
<blockquote>
<h1>3.4.0</h1>
<p>SECURITY: Prior <code>tempfile</code> releases depended on
<code>remove_dir_all</code> version 0.5.0 which was vulnerable to a <a
href="https://github.com/XAMPPRocky/remove_dir_all/security/advisories/GHSA-mc8h-8q98-g5hr">TOCTOU
race</a>. This same race is present in rust versions prior to
1.58.1.</p>
<p>Features:</p>
<ul>
<li>Generalized temporary files: <code>NamedTempFile</code> can now
abstract over different kinds of files (e.g.,
unix domain sockets, pipes, etc.):
<ul>
<li>Add <code>Builder::make</code> and <code>Builder::make_in</code> for
generalized temp file
creation.</li>
<li>Add <code>NamedTempFile::from_parts</code> to complement
<code>NamedTempFile::into_parts</code>.</li>
<li>Add generic parameter to <code>NamedTempFile</code> to support
wrapping non-File types.</li>
</ul>
</li>
</ul>
<p>Bug Fixes/Improvements:</p>
<ul>
<li>Don't try to create a temporary file multiple times if the file path
has been fully specified by
the user (no random characters).</li>
<li><code>NamedTempFile::persist_noclobber</code> is now always atomic
on linux when <code>renameat_with</code> is
supported. Previously, it would first link the new path, then unlink the
previous path.</li>
<li>Fix compiler warnings on windows.</li>
</ul>
<p>Trivia:</p>
<ul>
<li>Switch from <code>libc</code> to <code>rustix</code> on wasi/unix.
This now makes direct syscalls instead of calling
through libc.</li>
<li>Remove <code>remove_dir_all</code> dependency. The rust standard
library has optimized their internal version
significantly.</li>
<li>Switch to official windows-sys windows bindings.</li>
</ul>
<p>Breaking:</p>
<ul>
<li>The minimum rust version is now <code>1.48.0</code>.</li>
<li>Mark most functions as <code>must_use</code>.</li>
<li>Uses direct syscalls on linux by default, instead of libc.</li>
<li>The new type parameter in <code>NamedTempFile</code> may lead to
type inference issues in some cases.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/Stebalien/tempfile/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
I think this _might_ fix the issues we've been seeing with plugin tests.
In a nutshell, the plugin tests run `cargo build` to ensure that plugins
have been built:
f6ca62384e/crates/nu-test-support/src/commands.rs (L6)
This PR adds a mutex to ensure that we're never running `cargo build`
concurrently. It also uses an atomic bool to signal when plugins have
already been built, so we can avoid invoking `cargo build` multiple
times unnecessarily.
I can't be certain yet, but I'm guessing the macOS CI problems we've
been seeing come from plugin tests clobbering each other (something
like: test 1 builds the `foo` plugin, then test2 invokes `cargo build`
again and deletes the `foo` plugin from disk).
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
This pull request removes `Reqwest` and replaces it with `Ureq` to
remove some of our dependencies, giving us faster compile times as well
as smaller binaries. `Ureq` does not have an async runtime included so
we do not need build heavy dependencies such as `Tokio`. From older
tests I had the number of build units be reduced from `430 -> 392`.
The default of `Ureq` uses `Rustls` but it has been configured to
instead use `native_tls` which should work exactly the same as the `tls`
works now.
I removed `content-length` from the http commands as after refactoring i
did not see a reason to have it available, correct me if this is
something we should preserve.
In the medium, to long term, we should maybe consider changing to
`rustls` to have the same `tls` on all platforms.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
