# Description
This PR addresses #11204 which points out that using a closure for the
replacement value with `update`, `insert`, or `upsert` does not work for
lists.
# User-Facing Changes
- Replacement closures should now work for lists in `upsert`, `insert`,
and `update`. E.g., `[0] | update 0 {|i| $i + 1 }` now gives `[1]`
instead of an unhelpful error.
- `[1 2] | insert 4 20` no longer works. Before, this would give `[1, 2,
null, null, 20]`, but now it gives an error. This was done to match the
intended behavior in `Value::insert_data_at_cell_path`, whereas the
behavior before was probably unintentional. Following
`Value::insert_data_at_cell_path`, inserting at the end of a list is
also fine, so the valid indices for `upsert` and `insert` are
`0..=length` just like `Vec::insert` or list inserts in other languages.
# Tests + Formatting
Added tests for `upsert`, `insert`, and `update`:
- Replacement closures for lists, list streams, records, and tables
- Other list stream tests
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Hi! I was playing around and I fixed the formatting in the LSP hover.
I _only tested in VS Code using Windows_, if anyone is capable, can you
test it on nvim or linux if it works properly? I think markdown
shouldn't have any problem
The link of the LSP meta issue just for reference #10941
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
Now the LSP hovers markdown properly
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The `spam` command is provided by
[opensp](https://openjade.sourceforge.net/) which causes
`overlay_use_main_not_exported` to hang. `opensp` is pulled by
`gnome-control-center` on my system.
[opensp package
list](https://archlinux.org/packages/extra/x86_64/opensp/files/)
```
opensp 1.5.2-10 File List
Package has 224 files and 14 directories.
[Back to Package](https://archlinux.org/packages/extra/x86_64/opensp/)
usr/
usr/bin/
usr/bin/nsgmls
usr/bin/onsgmls
usr/bin/osgmlnorm
usr/bin/ospam
usr/bin/ospcat
usr/bin/ospent
usr/bin/osx
usr/bin/sgml2xml
usr/bin/sgmlnorm
usr/bin/spam
...snip...
```
`cargo test` output
```
...snip...
test shell::pipeline::commands::internal::unlet_variable_in_parent_scope ... ok
test shell::pipeline::commands::internal::unlet_env_variable ... ok
test shell::pipeline::doesnt_break_on_utf8 ... ok
test shell::run_export_extern ... ok
test shell::run_script_that_looks_like_module ... ok
test shell::pipeline::commands::internal::can_process_one_row_from_internal_and_pipes_it_to_stdin_of_external ... ok
test shell::pipeline::commands::internal::variable_scoping::access_variables_in_scopes ... ok
test shell::run_in_login_mode ... ok
test shell::run_in_interactive_mode ... ok
test shell::run_in_noninteractive_mode ... ok
test shell::run_in_not_login_mode ... ok
test shell::pipeline::commands::internal::subexpression_properly_redirects ... ok
test shell::pipeline::commands::internal::subexpression_handles_dot ... ok
test shell::pipeline::commands::internal::takes_rows_of_nu_value_strings_and_pipes_it_to_stdin_of_external ... ok
test overlays::overlay_use_main_not_exported has been running for over 60 seconds
```
# User-Facing Changes
N/A
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# After Submitting
N/A
# Description
This PR is kind of two PRs in one because they were dependent on each
other.
PR1 -
3de58d4dc2
with update
7fcdb242d9
- This follows our mantra of having everything with defaults written in
nushell rust code. So, that if you run without a config, you get the
same behavior as with the default config/env files. This sets
NU_LIB_DIRS to $nu.config-path/scripts and sets NU_PLUGIN_DIRS to
$nu.config-path/plugins.
PR2 -
0e8ac876fd
- The benchmarks have been broke for some time and we didn't notice it.
This PR fixes that. It's dependent on PR1 because it was throwing errors
because PWD needed to be set to a valid folder and `$nu` did not exist
based on how the benchmark was setup.
I've tested the benchmarks and they run without error now and I've also
launched nushell as `nu -n --no-std-lib` and the env vars exist.
closes#11236
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Replace `.to_string()` used in `GenericError` with `.into()` as
`.into()` seems more popular
Replace `Vec::new()` used in `GenericError` with `vec![]` as `vec![]`
seems more popular
(There are so, so many)
Allow `++=` to work in all situations `++` does, namely for appending
single elements: `$list ++= 1`.
Resolve#11087
# Description
Bring `++=` to parity with `++`.
# User-Facing Changes
It is now possible to do `$list ++= 1` (appending a single element).
Similarly, this can be done:
```Nushell
~> mut a = [1]
~> $a ++= 2
~> a
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
╰───┴───╯
```
# Tests + Formatting
Added two tests:
- `commands::assignment::append_assign::append_assign_single_element`
- `commands::assignment::append_assign::append_assign_to_single_element`
related to
-
https://github.com/nushell/nushell/issues/10676#issuecomment-1842472941
from @suimong
# Description
the command in the `README.md` of `nu-std` should use `scope commands`
instead of `help commands`, which return an empty list.
# User-Facing Changes
# Tests + Formatting
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
It turns out that I left a bug in
[#11144](https://github.com/nushell/nushell/pull/11144/), which
introduced a spread operator in record literals. When highlighting
subexpressions that are spread inside records, the spread operator and
the token before it are insert twice. Currently, when you type `{ ...()
}`, this is what you'll see:
With the PR, the behavior is as expected:
I'm still not sure how `FlatShape` works, I just copied the existing
logic for flattening key-value pairs in records, so it's possible
there's still issues, but I haven't found any yet (tried spreading
subexpressions, variables, and records).
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Highlighting for subexpressions spread inside records should no longer
be screwed up.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Is there any way to test flattening/syntax highlighting?
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #11143
# User-Facing Changes
Take the following as example:
```nushell
module foo { export def bar [] {}; export def baz [] {} }
```
`use foo bar baz` will be error:
```
❯ use foo c d
Error: nu::parser::wrong_import_pattern
× Wrong import pattern structure.
╭─[entry #2:1:1]
1 │ use foo c d
· ┬
· ╰── Trying to import something but the parent `c` is not a module, maybe you want to try `use <module> [<name1>, <name2>]`
╰────
```
# Tests + Formatting
Done
# Description
This PR changes the way we handled non-zero exit codes to be and early
exit between `foo; bar`. If `foo` in the example has a non-zero exit
code, `bar` wouldn't be run.
This also affects subexpressions.
Bumps
[actions-rust-lang/setup-rust-toolchain](https://github.com/actions-rust-lang/setup-rust-toolchain)
from 1.5.0 to 1.6.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/blob/main/CHANGELOG.md">actions-rust-lang/setup-rust-toolchain's
changelog</a>.</em></p>
<blockquote>
<h2>[1.6.0] - 2023-12-04</h2>
<h3>Added</h3>
<ul>
<li>Allow disabling problem matchers (<a
href="https://redirect.github.com/actions-rust-lang/setup-rust-toolchain/issues/27">#27</a>)
This can be useful when having a matrix of jobs, that produce the same
errors.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="c7e1de2846"><code>c7e1de2</code></a>
Update CHANGELOG.md</li>
<li><a
href="24c9dd087b"><code>24c9dd0</code></a>
Merge pull request <a
href="https://redirect.github.com/actions-rust-lang/setup-rust-toolchain/issues/24">#24</a>
from obi1kenobi/patch-1</li>
<li><a
href="74a4154991"><code>74a4154</code></a>
Merge pull request <a
href="https://redirect.github.com/actions-rust-lang/setup-rust-toolchain/issues/27">#27</a>
from oxideai/feature/config-matcher</li>
<li><a
href="84ba0c9d1b"><code>84ba0c9</code></a>
Update README</li>
<li><a
href="51173b3da4"><code>51173b3</code></a>
feature(matcher): allow disabling problem matcher</li>
<li><a
href="33678a48c0"><code>33678a4</code></a>
Add docs for the <code>cachekey</code> output to the README</li>
<li><a
href="317ed62323"><code>317ed62</code></a>
Update example workflow in readme</li>
<li><a
href="8cb8f77172"><code>8cb8f77</code></a>
Merge pull request <a
href="https://redirect.github.com/actions-rust-lang/setup-rust-toolchain/issues/23">#23</a>
from actions-rust-lang/dependabot/github_actions/actio...</li>
<li><a
href="1f541c5b05"><code>1f541c5</code></a>
Bump actions/checkout from 3 to 4</li>
<li>See full diff in <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/compare/v1.5.0...v1.6.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Trying to call `metadata $env` or `metadata $nu` will throw an error:
```Nushell
~> metadata $nu
Error: × Built-in variables `$env` and `$nu` have no metadata
╭─[entry #1:1:1]
1 │ metadata $nu
· ─┬─
· ╰── no metadata available
╰────
```
# Description
This PR adds an explicit indication for duplicate flags, which helps
with debugging.
# User-Facing Changes
N/A
# Tests + Formatting
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# After Submitting
N/A
# Description
This PR adds checks for ports. This fixes unexpected output similar to
the one in the comment
https://github.com/nushell/nushell/pull/11210#issuecomment-1837152357.
* before
```console
/data/source/nushell> port 65536 99999
41233
```
* after
```console
/data/source/nushell> port 65536 99999
Error: nu:🐚:cant_convert
× Can't convert to u16.
╭─[entry #1:1:1]
1 │ port 65536 99999
· ──┬──
· ╰── can't convert usize to u16
╰────
help: out of range integral type conversion attempted (min: 0, max: 65535)
```
# User-Facing Changes
N/A
# Tests + Formatting
* [x] add `port_out_of_range` test
# After Submitting
N/A
closes#11059
# Description
I'm not sure what the consensus was after discussing this in discord, so
I'm creating a PR as suggested
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
TBD
# Tests + Formatting
TBD
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
TBD
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Without this change, projects which depend on both nu-command and
rust_decimal's "rkyv" feature cause nu-command to fail to compile.
```toml
[dependencies]
nu-command = { path = "../nushell/crates/nu-command" }
rust_decimal = { version = "1", features = ["rkyv"] }
```
```console
error[E0277]: can't compare `std::option::Option<&str>` with `std::option::Option<&std::string::String>`
--> nushell/crates/nu-command/src/filters/join.rs:367:35
|
367 | let k_shared = shared_key == Some(k);
| ^^ no implementation for `std::option::Option<&str> == std::option::Option<&std::string::String>`
|
= help: the trait `PartialEq<std::option::Option<&std::string::String>>` is not implemented for `std::option::Option<&str>`
= help: the following other types implement trait `PartialEq<Rhs>`:
<std::option::Option<Box<U>> as PartialEq<rkyv::niche::option_box::ArchivedOptionBox<T>>>
<std::option::Option<T> as PartialEq>
<std::option::Option<U> as PartialEq<rkyv::option::ArchivedOption<T>>>
For more information about this error, try `rustc --explain E0277`.
warning: `nu-command` (lib) generated 1 warning
error: could not compile `nu-command` (lib) due to previous error; 1 warning emitted
```
# Description
Fixes issue #11212 where only the first cellpath supplied to `get -i` is
treated as optional, and the rest of the cell paths are treated as
non-optional.
# Tests
Added one test.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Try to fix capacity overflow caused by large range of ports.
```
$ port 1024 999999999999999999 12/02/23 20:03:14 PM
thread 'main' panicked at 'capacity overflow', library/alloc/src/raw_vec.rs:524:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Try to improve the error message of invalid range.
* before
* after
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
this PR deprecates the `std testing` module in favor of Nupm.
the plan is to simply hide the module to the user but still use it
internally when running the tests so that
- users don't start to use this module and rather focus on Nupm
- devs don't have to install anything to run the tests locally, they can
just use `toolkit test stdlib` for instance
the deprecation message will be very similar to
https://github.com/nushell/nushell/pull/11097
> **Note**
> to demonstrate that the removal of such a command from the exposed
modules of `std` will be transparent and not require the user to install
anything, i have it [prepared in a branch based on this
PR](https://github.com/amtoine/nushell/compare/deprecate-std-testing...amtoine:nushell:hide-std-testing)
> running `toolkit test stdlib` will run the standard library tests
without an issue and yet `use std testing` won't work 👌
# User-Facing Changes
`std testing run-tests` will be removed in `0.90`
# Tests + Formatting
# After Submitting
this should
- close https://github.com/nushell/nushell/issues/11134
# Description
this is band-aid...
but it should address the issue in
https://github.com/nushell/nushell/issues/11134 until we have a better
long-term fix for this i/o types bug 😇
# User-Facing Changes
the following will now parse and run fine
```nushell
def get-initial-commit []: nothing -> string {
^git rev-list HEAD | lines | last
}
```
# Tests + Formatting
# After Submitting
`input list` now allows all types by using `into_string`.
Custom formatting logic for records was removed.
Allow ranges as an input types.
Also made the prompt check depend on option, so `input list ""` will
have an empty prompt, while `input list` does not.
Resolve#11181
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This is a continuation of #11190. Try to add `OutOfBounds` error. It
seems that `OutOfBounds` is more accurate than `InvalidRange`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is a PR to start adding a few tests to the `stor` commands. It
refactors the `stor create` command so it's easier to write tests.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #11153
To make sure scripts stop from running on non-zero exit code, we need to
invoke `might_consume_external_result` on
`PipelineData::ExternalStream`, so it can tell nushell if this command
exists with non-zero exit code.
And this pr also adjusts some test cases.
# User-Facing Changes
```nushell
^false out> /dev/null; print "ok"
```
After this pr, it shouldn't print ok.
# Tests + Formatting
Done
# Description
This PR implements modifications to command tests that write unnecessary
json and csv to disk then load it with open, by using nuon literals
instead.
- Fixes#7189
# User-Facing Changes
None
# Tests + Formatting
This only affects existing tests, which still pass.
Goes towards implementing #10598, which asks for a spread operator in
lists, in records, and when calling commands (continuation of #11006,
which only implements it in lists)
# Description
This PR is for adding a spread operator that can be used when building
records. Additional functionality can be added later.
Changes:
- Previously, the `Expr::Record` variant held `(Expression, Expression)`
pairs. It now holds instances of an enum `RecordItem` (the name isn't
amazing) that allows either a key-value mapping or a spread operator.
- `...` will be treated as the spread operator when it appears before
`$`, `{`, or `(` inside records (no whitespace allowed in between) (not
implemented yet)
- The error message for duplicate columns now includes the column name
itself, because if two spread records are involved in such an error, you
can't tell which field was duplicated from the spans alone
`...` will still be treated as a normal string outside records, and even
in records, it is not treated as a spread operator when not followed
immediately by a `$`, `{`, or `(`.
# User-Facing Changes
Users will be able to use `...` when building records.
```
> let rec = { x: 1, ...{ a: 2 } }
> $rec
╭───┬───╮
│ x │ 1 │
│ a │ 2 │
╰───┴───╯
> { foo: bar, ...$rec, baz: blah }
╭─────┬──────╮
│ foo │ bar │
│ x │ 1 │
│ a │ 2 │
│ baz │ blah │
╰─────┴──────╯
```
If you want to update a field of a record, you'll have to use `merge`
instead:
```
> { ...$rec, x: 5 }
Error: nu:🐚:column_defined_twice
× Record field or table column used twice: x
╭─[entry #2:1:1]
1 │ { ...$rec, x: 5 }
· ──┬─ ┬
· │ ╰── field redefined here
· ╰── field first defined here
╰────
> $rec | merge { x: 5 }
╭───┬───╮
│ x │ 5 │
│ a │ 2 │
╰───┴───╯
```
# Tests + Formatting
# After Submitting
Works for all arguments and flags. Because the signature parsing doesn't
give the spans, it is flags the entire signature.
Also added a constant with reserved variable names.
Fix#11158.
Reverts nushell/nushell#10943
The current implementation of `arr_to_value` is unsound, as it allows
casts of arbitrary data to arbitrary types without being marked
`unsafe`.
The full safety requirements to perform both the cast and the following
unchecked access are not as clear that a simple change of `fn
arr_to_value` to `unsafe fn arr_to_value` could be blessed without
further investigation.
cc @ayax79
# Description
Convert these ShellError variants to named fields:
* CreateNotPossible
* MoveNotPossibleSingle
* DirectoryNotFoundCustom
* DirectoryNotFound
* NotADirectory
* OutOfMemoryError
* PermissionDeniedError
* IOErrorSpanned
* IOError
* IOInterrupted
Also place the `span` field of `DirectoryNotFound` last to match other
errors.
Part of #10700 (almost half done!)
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
We have seen some test cases which requires to output message to both
stdout and stderr, especially in redirection scenario.
This pr is going to introduce a new echo_env_mixed testbin, so we can
have less tests which only runs on windows.
# User-Facing Changes
NaN
# Tests + Formatting
NaN
# After Submitting
NaN
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This PR preserves metadata when running some filters. As discussed on
discord that helps when running for example `ls | reject modified`
because it keeps colouring and links.
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Close: #10278
This pr introduces `o>>`, `e>>`, `o+e>>` to allow redirection to append
to a file.
Examples:
```nushell
echo abc o>> a.txt
echo abc o>> a.txt
cat asdf e>> a.txt
cat asdf e>> a.txt
cat asdf o+e>> a.txt
```
~~TODO:~~
~~1. currently internal commands with `o+e>` redirect to a variable is
broken: `let x = "a.txt"; echo abc o+e> $x`, not sure when it was
introduced...~~
~~2. redirect stdout and stderr with append mode doesn't supported yet:
`cat asdf o>>a.txt e>>b.ext`~~
~~For these 2 items, I'd like to fix them in different prs.~~
Already done in this pr
# Description
This PR addresses issue with cp brough up on
[discord](https://discord.com/channels/601130461678272522/614593951969574961/1177669443917189130)
where target of cp is not correctly expanded.
If one has directory `test` with file `file.txt` in it then the
following command (in one line or inside a `do` block):
```nu
cd test; let file = 'copy.txt'; cp file.txt $file
```
will create a `copy.txt` in `.` not in `test` instead. This happens
because target of `cp` is a variable which is not expanded unlike a
string literal
# User-Facing Changes
`cp` will correctly parse realative target paths
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR enables a new feature that shows which externals are found in
your path via the syntax highlighter as you type.
This idea could use some improvement where it caches the items in your
path and on some trigger, expires that cache and creates a new on. Right
now, all it does is call the `which` crate on every character you type.
This could be problematic if you have hundreds of paths in your PATH or
if some of your paths in your Path point to extraordinarily slow file
systems. WSL pointing to Windows comes to mind. Either way, I've thrown
it up here for people to try and provide feedback. I think the novelty
of showing what is valid and what isn't is pretty cool. I believe
fish-shell also does this, IIRC.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
