Make Shorewall6 shut up about missing KERNELVERSION

This reverts commit 8d2408a8d6.

Samples/one-interface/interfaces

@@ -10,10 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-interfaces"
-#
-# For additional information, see
-# http://shorewall.net/Documentation.htm#Interfaces
-#
 ###############################################################################
 #ZONE	INTERFACE	BROADCAST	OPTIONS
 net     eth0            detect          dhcp,tcpflags,logmartians,nosmurfs

Samples/one-interface/policy

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #-----------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-policy"
-#
-# See http://shorewall.net/Documentation.htm#Policy for additional information.
-#
 ###############################################################################
 #SOURCE		DEST		POLICY		LOG LEVEL	LIMIT:BURST
 $FW		net		ACCEPT

Samples/one-interface/rules

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------------------------------------
 # For information on entries in this file, type "man shorewall-rules"
-#
-# For more information, see http://www.shorewall.net/Documentation.htm#Zones
-#
 #############################################################################################################
 #ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK
 #							PORT	PORT(S)		DEST		LIMIT		GROUP

Samples/one-interface/shorewall.conf

@@ -34,9 +34,9 @@ VERBOSITY=1
 
 LOGFILE=/var/log/messages
 
-STARTUP_LOG=
+STARTUP_LOG=/var/log/shorewall-init.log
 
-LOG_VERBOSITY=
+LOG_VERBOSITY=2
 
 LOGFORMAT="Shorewall:%s:%s:"
 
@@ -107,7 +107,7 @@ RCP_COMMAND='scp ${files} ${root}@${system}:${destination}'
 #			F I R E W A L L	  O P T I O N S
 ###############################################################################
 
-IP_FORWARDING=On
+IP_FORWARDING=Off
 
 ADD_IP_ALIASES=Yes
 
@@ -191,6 +191,10 @@ AUTOMAKE=No
 
 WIDE_TC_MARKS=Yes
 
+TRACK_PROVIDERS=Yes
+
+ZONE2ZONE=2
+
 ###############################################################################
 #			P A C K E T   D I S P O S I T I O N
 ###############################################################################

Samples/one-interface/zones

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #-----------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-zones"
-#
-# For more information, see http://www.shorewall.net/Documentation.htm#Zones
-#
 ###############################################################################
 #ZONE	TYPE	OPTIONS			IN			OUT
 #					OPTIONS			OPTIONS

Samples/three-interfaces/interfaces

@@ -10,10 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-interfaces"
-#
-# For additional information, see
-# http://shorewall.net/Documentation.htm#Interfaces
-#
 ###############################################################################
 #ZONE	INTERFACE	BROADCAST	OPTIONS
 net     eth0            detect          tcpflags,dhcp,nosmurfs,routefilter,logmartians

Samples/three-interfaces/masq

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-masq"
-#
-# For additional information, see http://shorewall.net/Documentation.htm#Masq
-#
 ##############################################################################
 #INTERFACE		SOURCE		ADDRESS		PROTO	PORT(S)	IPSEC	MARK
 eth0			10.0.0.0/8,\

Samples/three-interfaces/policy

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-policy"
-#
-# See http://shorewall.net/Documentation.htm#Policy for additional information.
-#
 ###############################################################################
 #SOURCE		DEST		POLICY		LOG LEVEL	LIMIT:BURST
 

Samples/three-interfaces/routestopped

@@ -10,11 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-routestopped"
-#
-# See http://shorewall.net/Documentation.htm#Routestopped and
-# http://shorewall.net/starting_and_stopping_shorewall.htm for additional
-# information.
-#
 ##############################################################################
 #INTERFACE	HOST(S)
 eth1		-

Samples/three-interfaces/rules

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-rules"
-#
-# For additional information, see http://shorewall.net/Documentation.htm#Rules
-#
 #############################################################################################################
 #ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK
 #							PORT	PORT(S)		DEST		LIMIT		GROUP

Samples/three-interfaces/shorewall.conf

@@ -34,9 +34,9 @@ VERBOSITY=1
 
 LOGFILE=/var/log/messages
 
-STARTUP_LOG=
+STARTUP_LOG=/var/log/shorewall-init.log
 
-LOG_VERBOSITY=
+LOG_VERBOSITY=2
 
 LOGFORMAT="Shorewall:%s:%s:"
 
@@ -191,6 +191,10 @@ AUTOMAKE=No
 
 WIDE_TC_MARKS=Yes
 
+TRACK_PROVIDERS=Yes
+
+ZONE2ZONE=2
+
 ###############################################################################
 #			P A C K E T   D I S P O S I T I O N
 ###############################################################################

Samples/three-interfaces/zones

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-zones"
-#
-# For more information, see http://www.shorewall.net/Documentation.htm#Zones
-#
 ###############################################################################
 #ZONE	TYPE	OPTIONS			IN			OUT
 #					OPTIONS			OPTIONS

Samples/two-interfaces/interfaces

@@ -10,10 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-interfaces"
-#
-# For additional information, see
-# http://shorewall.net/Documentation.htm#Interfaces
-#
 ###############################################################################
 #ZONE	INTERFACE	BROADCAST	OPTIONS
 net     eth0            detect          dhcp,tcpflags,nosmurfs,routefilter,logmartians

Samples/two-interfaces/masq

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-masq"
-#
-# For additional information, see http://shorewall.net/Documentation.htm#Masq
-#
 ###############################################################################
 #INTERFACE		SOURCE		ADDRESS		PROTO	PORT(S)	IPSEC	MARK
 eth0			10.0.0.0/8,\

Samples/two-interfaces/policy

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-policy"
-#
-# See http://shorewall.net/Documentation.htm#Policy for additional information.
-#
 ###############################################################################
 #SOURCE		DEST		POLICY		LOG LEVEL	LIMIT:BURST
 

Samples/two-interfaces/routestopped

@@ -10,11 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-routestopped"
-#
-# See http://shorewall.net/Documentation.htm#Routestopped and
-# http://shorewall.net/starting_and_stopping_shorewall.htm for additional
-# information.
-#
 ##############################################################################
 #INTERFACE	HOST(S)                  OPTIONS
 eth1		-

Samples/two-interfaces/rules

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-rules"
-#
-# For more information, see http://www.shorewall.net/Documentation.htm#Rules
-#
 #############################################################################################################
 #ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK
 #							PORT	PORT(S)		DEST		LIMIT		GROUP

Samples/two-interfaces/shorewall.conf

@@ -41,9 +41,9 @@ SHOREWALL_COMPILER=
 
 LOGFILE=/var/log/messages
 
-STARTUP_LOG=
+STARTUP_LOG=/var/log/shorewall-init.log
 
-LOG_VERBOSITY=
+LOG_VERBOSITY=2
 
 LOGFORMAT="Shorewall:%s:%s:"
 
@@ -198,6 +198,10 @@ AUTOMAKE=No
 
 WIDE_TC_MARKS=Yes
 
+TRACK_PROVIDERS=Yes
+
+ZONE2ZONE=2
+
 ###############################################################################
 #			P A C K E T   D I S P O S I T I O N
 ###############################################################################

Samples/two-interfaces/zones

@@ -10,9 +10,6 @@
 # See the file README.txt for further details.
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-zones"
-#
-# For more information, see http://www.shorewall.net/Documentation.htm#Zones
-#
 ###############################################################################
 #ZONE	TYPE	OPTIONS			IN			OUT
 #					OPTIONS			OPTIONS

Samples6/one-interface/shorewall6.conf

@@ -32,9 +32,9 @@ VERBOSITY=1
 
 LOGFILE=/var/log/messages
 
-STARTUP_LOG=
+STARTUP_LOG=/var/log/shorewall6-init.log
 
-LOG_VERBOSITY=
+LOG_VERBOSITY=2
 
 LOGFORMAT="Shorewall:%s:%s:"
 
@@ -139,6 +139,10 @@ AUTOMAKE=No
 
 WIDE_TC_MARKS=Yes
 
+TRACK_PROVIDERS=Yes
+
+ZONE2ZONE=2
+
 ###############################################################################
 #			P A C K E T   D I S P O S I T I O N
 ###############################################################################

Samples6/three-interfaces/shorewall6.conf

@@ -32,9 +32,9 @@ VERBOSITY=1
 
 LOGFILE=/var/log/messages
 
-STARTUP_LOG=
+STARTUP_LOG=/var/log/shorewall6-init.log
 
-LOG_VERBOSITY=
+LOG_VERBOSITY=2
 
 LOGFORMAT="Shorewall:%s:%s:"
 
@@ -139,6 +139,10 @@ AUTOMAKE=No
 
 WIDE_TC_MARKS=Yes
 
+TRACK_PROVIDERS=Yes
+
+ZONE2ZONE=2
+
 ###############################################################################
 #			P A C K E T   D I S P O S I T I O N
 ###############################################################################

Samples6/two-interfaces/shorewall6.conf

@@ -32,9 +32,9 @@ VERBOSITY=1
 
 LOGFILE=/var/log/messages
 
-STARTUP_LOG=
+STARTUP_LOG=/var/log/shorewall6-init.log
 
-LOG_VERBOSITY=
+LOG_VERBOSITY=2
 
 LOGFORMAT="Shorewall:%s:%s:"
 
@@ -139,6 +139,10 @@ AUTOMAKE=No
 
 WIDE_TC_MARKS=Yes
 
+TRACK_PROVIDERS=Yes
+
+ZONE2ZONE=2
+
 ###############################################################################
 #			P A C K E T   D I S P O S I T I O N
 ###############################################################################

Shorewall-lite/default.debian

@@ -21,4 +21,9 @@ startup=0
 
 OPTIONS=""
 
+#
+# Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf
+#
+INITLOG=/dev/null
+
 # EOF

Shorewall-lite/fallback.sh

@@ -28,7 +28,7 @@
 #       shown below. Simply run this script to revert to your prior version of
 #       Shoreline Firewall.
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {

Shorewall-lite/init.debian.sh

@@ -15,9 +15,7 @@
 
 SRWL=/sbin/shorewall-lite
 SRWL_OPTS="-tvv"
-# Note, set INITLOG to /dev/null if you do not want to
-# keep logs of the firewall (not recommended)
-INITLOG=/var/log/shorewall-lite-init.log
+test -n ${INITLOG:=/var/log/shorewall-lite-init.log}
 
 [ "$INITLOG" eq "/dev/null" && SHOREWALL_INIT_SCRIPT=1 || SHOREWALL_INIT_SCRIPT=0
 
@@ -25,7 +23,7 @@ export SHOREWALL_INIT_SCRIPT
 
 test -x $SRWL || exit 0
 test -x $WAIT_FOR_IFUP || exit 0
-test -n $INITLOG || {
+test -n "$INITLOG" || {
 	echo "INITLOG cannot be empty, please configure $0" ; 
 	exit 1;
 }

Shorewall-lite/install.sh

@@ -22,7 +22,7 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {
@@ -220,6 +220,11 @@ mkdir -p ${PREFIX}/var/lib/shorewall-lite
 chmod 755 ${PREFIX}/etc/shorewall-lite
 chmod 755 ${PREFIX}/usr/share/shorewall-lite
 
+if [ -n "$PREFIX" ]; then
+    mkdir -p ${PREFIX}/etc/logrotate.d
+    chmod 755 ${PREFIX}/etc/logrotate.d
+fi
+
 #
 # Install the config file
 #
@@ -304,6 +309,12 @@ cd ..
 
 echo "Man Pages Installed"
 
+if [ -d ${PREFIX}/etc/logrotate.d ]; then
+    run_install $OWNERSHIP -m 0644 logrotate ${PREFIX}/etc/logrotate.d/shorewall-lite
+    echo "Logrotate file installed as ${PREFIX}/etc/logrotate.d/shorewall-lite"
+fi
+
+
 #
 # Create the version file
 #

Shorewall-lite/logrotate

@@ -0,0 +1,5 @@
+/var/log/shorewall-init.log {
+  missingok
+  notifempty
+  create 0600 root root
+}

Shorewall-lite/shorewall-lite

@@ -95,7 +95,7 @@ get_config() {
 
     if ( ps ax 2> /dev/null | grep -v grep |  qt grep 'syslogd.*-C' ) ; then
 	LOGREAD="logread | tac"
-    elif [ -f $LOGFILE ]; then
+    elif [ -r $LOGFILE ]; then
 	LOGREAD="tac $LOGFILE"
     else
 	echo "LOGFILE ($LOGFILE) does not exist!" >&2

Shorewall-lite/shorewall-lite.spec

@@ -1,6 +1,6 @@
 %define name shorewall-lite
-%define version 4.4.0
-%define release 2
+%define version 4.4.5
+%define release 4
 
 Summary: Shoreline Firewall Lite is an iptables-based firewall for Linux systems.
 Name: %{name}
@@ -79,6 +79,8 @@ fi
 %attr(0755,root,root) %dir /usr/share/shorewall-lite
 %attr(0700,root,root) %dir /var/lib/shorewall-lite
 
+%attr(0644,root,root) /etc/logrotate.d/shorewall-lite
+
 %attr(0755,root,root) /sbin/shorewall-lite
 
 %attr(0644,root,root) /usr/share/shorewall-lite/version
@@ -98,10 +100,30 @@ fi
 %doc COPYING changelog.txt releasenotes.txt
 
 %changelog
-* Fri Aug 28 2009 Tom Eastep tom@shorewall.net
-- Updated to 4.4.0-2
-* Thu Aug 13 2009 Tom Eastep tom@shorewall.net
-- Updated to 4.4.0-1
+* Thu Dec 24 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-4
+* Thu Dec 24 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-4
+* Sun Dec 20 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-2
+* Sat Dec 19 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-1
+* Fri Nov 27 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-0base
+* Sat Nov 21 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0base
+* Fri Nov 13 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0Beta2
+* Wed Nov 11 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0Beta1
+* Tue Nov 03 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.3-0base
+* Sun Sep 06 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.2-0base
+* Fri Sep 04 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.2-0base
+* Fri Aug 14 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.1-0base
 * Mon Aug 03 2009 Tom Eastep tom@shorewall.net
 - Updated to 4.4.0-0base
 * Tue Jul 28 2009 Tom Eastep tom@shorewall.net

Shorewall-lite/uninstall.sh

@@ -26,7 +26,7 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {

Shorewall/Macros/macro.template

@@ -269,7 +269,7 @@
 #                       an action. See 'man shorewall-rules'.
 #
 #	RATE LIMIT	You may rate-limit the rule by placing a value in
-#			this colume:
+#			this column:
 #
 #				<rate>/<interval>[:<burst>]
 #
@@ -304,6 +304,100 @@
 #					#removed from Netfilter in kernel
 #					#version 2.6.14).
 #
+#	MARK		Specifies a MARK value to match. Must be empty or 
+#			'-' if the macro is to be used within an action.
+#			
+#				[!]value[/mask][:C]
+#
+#    			Defines a test on the existing packet or connection
+#			mark. The rule will match only if the test returns
+#			true.
+#
+#    			If you don't want to define a test but need to
+#			specify anything in the following columns,
+#			place a "-" in this field.
+#
+#    			!
+#
+#				Inverts the test (not equal)
+#
+#    			value
+#
+#				Value of the packet or connection mark.
+#
+#  			mask
+#
+#				A mask to be applied to the mark before
+#				testing.
+#
+#    			:C
+#
+#				Designates a connection mark. If omitted, the
+#				packet mark's value is tested.
+#
+#	CONNLIMIT	Must be empty or '-' if the macro is to be used within
+#			an action.
+#
+#				[!]limit[:mask]
+#
+#			May be used to limit the number of simultaneous
+#			connections from each individual host to limit 
+#			connections. Requires connlimit match in your kernel
+#			and iptables. While the limit is only checked on rules
+#			specifying CONNLIMIT, the number of current connections
+#			is calculated over all current connections from the
+#			SOURCE host. By default, the limit is applied to each
+#			host but can be made to apply to networks of hosts by
+#			specifying a mask. The mask specifies the width of a
+#			VLSM mask to be applied to the source address; the
+#			number of current connections is then taken over all
+#			hosts in the subnet source-address/mask. When ! is
+#			specified, the rule matches when the number of
+#			connection exceeds the limit.
+#
+#	TIME		Must be empty or '-' if the macro is to be used within
+#			an action.
+#
+#
+#				<timeelement>[&...]
+#
+#			timeelement may be:
+#
+#    				timestart=hh:mm[:ss]
+#
+#					Defines the starting time of day.
+#
+#    				timestop=hh:mm[:ss]
+#
+#					Defines the ending time of day.
+#
+#    				utc
+#
+#					Times are expressed in Greenwich Mean
+#					Time.
+#
+#    				localtz
+#
+#					Times are expressed in Local Civil Time
+#					(default).
+#
+#    				weekdays=ddd[,ddd]...
+#
+#					where ddd is one of Mon, Tue, Wed, Thu,
+#					Fri, Sat or Sun
+#
+#    				monthdays=dd[,dd],...
+#
+#					where dd is an ordinal day of the month#
+#
+#    				datestart=yyyy[-mm[-dd[Thh[:mm[:ss]]]]]
+#
+#					Defines the starting date and time.
+#
+#    				datestop=yyyy[-mm[-dd[Thh[:mm[:ss]]]]]
+#
+#					Defines the ending date and time.
+#
 # A few examples should help show how Macros work.
 #
 # /etc/shorewall/macro.FwdFTP:

Shorewall/Makefile

@@ -14,4 +14,8 @@ $(VARDIR)/${RESTOREFILE}: $(CONFDIR)/*
 	    /sbin/shorewall -q restart 2>&1 | tail >&2; \
 	fi
 
+clean:
+	@rm -f $(CONFDIR)/*~ $(CONFDIR)/.*~
+.PHONY: clean
+
 # EOF

Shorewall/Perl/Shorewall/Accounting.pm

@@ -35,27 +35,16 @@ use strict;
 our @ISA = qw(Exporter);
 our @EXPORT = qw( setup_accounting );
 our @EXPORT_OK = qw( );
-our $VERSION = '4.3_7';
+our $VERSION = '4.4_1';
 
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function or when compiling
-#                       for IPv6.
+# Called by the compiler to [re-]initialize this module's state
 #
-
 sub initialize() {
     our $jumpchainref;
     $jumpchainref = undef;
 }
 
-INIT {
-    initialize;
-}
-
 #
 # Accounting
 #
@@ -109,7 +98,7 @@ sub process_accounting_rule( ) {
 		} elsif ( $cmd ne 'JUMP' ) {
 		    accounting_error;
 		}
-	    } 
+	    }
 
 	    $target = jump_to_chain $action;
 	}

Shorewall/Perl/Shorewall/Actions.pm

@@ -3,7 +3,7 @@
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007,2008 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007,2008,2009 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -47,6 +47,7 @@ our @EXPORT = qw( merge_levels
 		  substitute_param
 		  merge_macro_source_dest
 		  merge_macro_column
+		  map_old_actions
 
 		  %usedactions
 		  %default_actions
@@ -56,7 +57,7 @@ our @EXPORT = qw( merge_levels
 		  $macro_commands
 		  );
 our @EXPORT_OK = qw( initialize );
-our $VERSION = '4.3_7';
+our $VERSION = '4.4_5';
 
 #
 #  Used Actions. Each action that is actually used has an entry with value 1.
@@ -85,21 +86,23 @@ our %macros;
 
 our $family;
 
+our @builtins;
+
 #
 # Commands that can be embedded in a macro file and how many total tokens on the line (0 => unlimited).
 #
 our $macro_commands = { COMMENT => 0, FORMAT => 2 };
 
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function or when compiling
-#                       for IPv6.
+# Rather than initializing globals in an INIT block or during declaration,
+# we initialize them in a function. This is done for two reasons:
+#
+#   1. Proper initialization depends on the address family which isn't
+#      known until the compiler has started.
+#
+#   2. The compiler can run multiple times in the same process so it has to be
+#      able to re-initialize its dependent modules' state.
 #
-
 sub initialize( $ ) {
 
     $family          = shift;
@@ -111,10 +114,12 @@ sub initialize( $ ) {
     %actions         = ();
     %logactionchains = ();
     %macros          = ();
-}
 
-INIT {
-    initialize( F_IPV4 );
+    if ( $family == F_IPV4 ) {
+	@builtins = qw/dropBcast allowBcast dropNotSyn rejNotSyn dropInvalid allowInvalid allowinUPnP forwardUPnP Limit/;
+    } else {
+	@builtins = qw/dropBcast allowBcast dropNotSyn rejNotSyn dropInvalid allowInvalid/;
+    }
 }
 
 #
@@ -208,7 +213,7 @@ sub merge_macro_source_dest( $$ ) {
     if ( $invocation ) {
 	if ( $body ) {
 	    return $body if $invocation eq '-';
-	    return "$body:$invocation" if $invocation =~ /.*?\.*?\.|^\+|^~|^!~/;
+	    return "$body:$invocation" if $invocation =~ /.*?\.*?\.|^\+|^!+|^~|^!~|~</;
 	    return "$invocation:$body";
 	}
 
@@ -232,7 +237,7 @@ sub merge_macro_column( $$ ) {
 # Get Macro Name -- strips away trailing /*, :* and (*) from the first column in a rule, macro or action.
 #
 sub isolate_basic_target( $ ) {
-    my $target = ( split '[/:]', $_[0])[0]; 
+    my $target = ( split '[/:]', $_[0])[0];
 
     $target =~ /^(\w+)[(].*[)]$/ ? $1 : $target;
 }
@@ -268,6 +273,34 @@ sub add_requiredby ( $$ ) {
     $actions{$requires}{requires}{$requiredby} = 1;
 }
 
+#
+# Map pre-3.0 actions to the corresponding Macro invocation
+#
+
+sub find_old_action ( $$$ ) {
+    my ( $target, $macro, $param ) = @_;
+
+    if ( my $actiontype = find_macro( $macro ) ) {
+	( $macro, $actiontype , $param );
+    } else {
+	( $target, 0, '' );
+    }
+}
+
+sub map_old_actions( $ ) {
+    my $target = shift;
+
+    if ( $target =~ /^Allow(.*)$/ ) {
+	find_old_action( $target, $1, 'ACCEPT' );
+    } elsif ( $target =~ /^Drop(.*)$/ ) {
+	find_old_action( $target, $1, 'DROP' );
+    } elsif ( $target = /^Reject(.*)$/ ) {
+	find_old_action( $target, $1, 'REJECT' );
+    } else {
+	( $target, 0, '' );
+    }
+}
+
 #
 # Create and record a log action chain -- Log action chains have names
 # that are formed from the action name by prepending a "%" and appending
@@ -306,7 +339,7 @@ sub createlogactionchain( $$ ) {
 
     fatal_error "Too many invocations of Action $action" if $actionref->{actchain} > 99;
 
-    unless ( $targets{$action} & STANDARD ) {
+    unless ( $targets{$action} & BUILTIN ) {
 
 	my $file = find_file $chain;
 
@@ -332,7 +365,7 @@ sub createsimpleactionchain( $ ) {
 
     $logactionchains{"$action:none"} = $chainref;
 
-    unless ( $targets{$action} & STANDARD ) {
+    unless ( $targets{$action} & BUILTIN ) {
 
 	my $file = find_file $action;
 
@@ -417,8 +450,9 @@ sub process_macro1 ( $$ ) {
 #
 # The functions process_actions1-3() implement the three phases of action processing.
 #
-# The first phase (process_actions1) occurs before the rules file is processed. ${SHAREDIR}/actions.std
-# and ${CONFDIR}/actions are scanned (in that order) and for each action:
+# The first phase (process_actions1) occurs before the rules file is processed. The builtin-actions are added
+# to the target table (%Shorewall::Chains::targets) and actions table, then ${SHAREDIR}/actions.std and
+# ${CONFDIR}/actions are scanned (in that order). For each action:
 #
 #      a) The related action definition file is located and scanned.
 #      b) Forward and unresolved action references are trapped as errors.
@@ -480,10 +514,10 @@ sub process_action1 ( $$ ) {
 sub process_actions1() {
 
     progress_message2 "Preprocessing Action Files...";
-
-    for my $act ( grep $targets{$_} & ACTION , keys %targets ) {
-	new_action $act;
-    }
+    #
+    # Add built-in actions to the target table and create those actions
+    #
+    $targets{$_} = ACTION + BUILTIN, new_action( $_ ) for @builtins;
 
     for my $file ( qw/actions.std actions/ ) {
 	open_file $file;
@@ -519,7 +553,7 @@ sub process_actions1() {
 
 	    while ( read_a_line ) {
 
-		my ($wholetarget, $source, $dest, $proto, $ports, $sports, $rate, $users ) = split_line 1, 8, 'action file';
+		my ($wholetarget, $source, $dest, $proto, $ports, $sports, $rate, $users, $mark ) = split_line 1, 9, 'action file';
 
 		process_action1( $action, $wholetarget );
 
@@ -556,8 +590,8 @@ sub process_actions2 () {
 #
 # This function is called to process each rule generated from an action file.
 #
-sub process_action( $$$$$$$$$$ ) {
-    my ($chainref, $actionname, $target, $source, $dest, $proto, $ports, $sports, $rate, $user ) = @_;
+sub process_action( $$$$$$$$$$$ ) {
+    my ($chainref, $actionname, $target, $source, $dest, $proto, $ports, $sports, $rate, $user, $mark ) = @_;
 
     my ( $action , $level ) = split_action $target;
 
@@ -575,7 +609,7 @@ sub process_action( $$$$$$$$$$ ) {
 
     expand_rule ( $chainref ,
 		  NO_RESTRICT ,
-		  do_proto( $proto, $ports, $sports ) . do_ratelimit( $rate, $action ) . do_user $user ,
+		  do_proto( $proto, $ports, $sports ) . do_ratelimit( $rate, $action ) . do_user $user . do_test( $mark, 0xFF ) ,
 		  $source ,
 		  $dest ,
 		  '', #Original Dest
@@ -588,8 +622,8 @@ sub process_action( $$$$$$$$$$ ) {
 #
 # Expand Macro in action files.
 #
-sub process_macro3( $$$$$$$$$$$ ) {
-    my ( $macro, $param, $chainref, $action, $source, $dest, $proto, $ports, $sports, $rate, $user ) = @_;
+sub process_macro3( $$$$$$$$$$$$ ) {
+    my ( $macro, $param, $chainref, $action, $source, $dest, $proto, $ports, $sports, $rate, $user, $mark ) = @_;
 
     my $nocomment = no_comment;
 
@@ -605,12 +639,14 @@ sub process_macro3( $$$$$$$$$$$ ) {
 
     while ( read_a_line ) {
 
-	my ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $morigdest, $mrate, $muser );
+	my ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $morigdest, $mrate, $muser, $mmark );
 
 	if ( $format == 1 ) {
-	    ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $mrate, $muser, $morigdest ) = split_line1 1, 9, 'macro file', $macro_commands;
+	    ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $mrate, $muser ) = split_line1 1, 8, 'macro file', $macro_commands;
+	    $morigdest = '-';
+	    $mmark     = '-';
 	} else {
-	    ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $morigdest, $mrate, $muser ) = split_line1 1, 9, 'macro file', $macro_commands;
+	    ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $morigdest, $mrate, $muser, $mmark ) = split_line1 1, 10, 'macro file', $macro_commands;
 	}
 
 	if ( $mtarget eq 'COMMENT' ) {
@@ -624,8 +660,6 @@ sub process_macro3( $$$$$$$$$$$ ) {
 	    next;
 	}
 
-	fatal_error "Invalid macro file entry (too many columns)" if $morigdest ne '-' && $format == 1;
-
 	if ( $mtarget =~ /^PARAM:?/ ) {
 	    fatal_error 'PARAM requires that a parameter be supplied in macro invocation' unless $param;
 	    $mtarget = substitute_param $param,  $mtarget;
@@ -666,8 +700,9 @@ sub process_macro3( $$$$$$$$$$$ ) {
 	$msports = merge_macro_column $msports, $sports;
 	$mrate   = merge_macro_column $mrate,   $rate;
 	$muser   = merge_macro_column $muser,   $user;
+	$mmark   = merge_macro_column $mmark,   $mark;
 
-	process_action $chainref, $action, $mtarget, $msource, $mdest, $mproto, $mports, $msports, $mrate, $muser;
+	process_action $chainref, $action, $mtarget, $msource, $mdest, $mproto, $mports, $msports, $mrate, $muser, $mark;
     }
 
     pop_open;
@@ -692,7 +727,7 @@ sub process_action3( $$$$$ ) {
 
     while ( read_a_line ) {
 
-	my ($target, $source, $dest, $proto, $ports, $sports, $rate, $user ) = split_line1 1, 8, 'action file';
+	my ($target, $source, $dest, $proto, $ports, $sports, $rate, $user, $mark ) = split_line1 1, 9, 'action file';
 
 	if ( $target eq 'COMMENT' ) {
 	    process_comment;
@@ -705,7 +740,7 @@ sub process_action3( $$$$$ ) {
 
 	( $action2 , my $param ) = get_target_param $action2;
 
-	my $action2type = $targets{$action2} || 0; 
+	my $action2type = $targets{$action2} || 0;
 
 	unless ( $action2type == STANDARD ) {
 	    if ( $action2type & ACTION ) {
@@ -716,9 +751,9 @@ sub process_action3( $$$$$ ) {
 	}
 
 	if ( $action2type == MACRO ) {
-	    process_macro3( $action2, $param, $chainref, $action, $source, $dest, $proto, $ports, $sports, $rate, $user );
+	    process_macro3( $action2, $param, $chainref, $action, $source, $dest, $proto, $ports, $sports, $rate, $user, $mark );
 	} else {
-	    process_action $chainref, $action, $target2, $source, $dest, $proto, $ports, $sports, $rate, $user;
+	    process_action $chainref, $action, $target2, $source, $dest, $proto, $ports, $sports, $rate, $user, $mark;
 	}
     }
 
@@ -875,10 +910,10 @@ sub process_actions3 () {
 		       'allowBcast'     => \&allowBcast,
 		       'dropNotSyn'     => \&dropNotSyn,
 		       'rejNotSyn'      => \&rejNotSyn,
-		       'dropInvalid'    => \&dropInvalid, 
+		       'dropInvalid'    => \&dropInvalid,
 		       'allowInvalid'   => \&allowInvalid,
-		       'allowinUPnP'    => \&allowinUPnP, 
-		       'forwardUPnP'    => \&forwardUPnP, 
+		       'allowinUPnP'    => \&allowinUPnP,
+		       'forwardUPnP'    => \&forwardUPnP,
 		       'Limit'          => \&Limit, );
 
     for my $wholeaction ( keys %usedactions ) {

Shorewall/Perl/Shorewall/Compiler.pm

@@ -43,20 +43,18 @@ use Shorewall::Raw;
 our @ISA = qw(Exporter);
 our @EXPORT = qw( compiler EXPORT TIMESTAMP DEBUG );
 our @EXPORT_OK = qw( $export );
-our $VERSION = '4.4_0';
+our $VERSION = '4.4_4';
 
 our $export;
 
 our $test;
 
-our $reused = 0;
-
-our $family = F_IPV4;
+our $family;
 
 #
-# Reinitilize the package-globals in the other modules
+# Initilize the package-globals in the other modules
 #
-sub reinitialize() {
+sub initialize_package_globals() {
     Shorewall::Config::initialize($family);
     Shorewall::Chains::initialize ($family);
     Shorewall::Zones::initialize ($family);
@@ -79,11 +77,11 @@ sub reinitialize() {
 #
 sub generate_script_1() {
 
-    my $date = localtime;
-
     if ( $test ) {
 	emit "#!/bin/sh\n#\n# Compiled firewall script generated by Shorewall-perl\n#";
     } else {
+	my $date = localtime;
+
 	emit "#!/bin/sh\n#\n# Compiled firewall script generated by Shorewall $globals{VERSION} - $date\n#";
 	if ( $family == F_IPV4 ) {
 	    copy $globals{SHAREDIRPL} . 'prog.header';
@@ -92,14 +90,24 @@ sub generate_script_1() {
 	}
     }
 
+    my $lib = find_file 'lib.private';
+
+    if ( -f $lib ) {
+	emit <<'EOF';
+################################################################################
+# Functions imported from lib.private
+################################################################################
+EOF
+
+	copy1 $lib;
+	emit "\n";
+    }
+
     emit <<'EOF';
 ################################################################################
 # Functions to execute the various user exits (extension scripts)
 ################################################################################
 EOF
-    my $lib = find_file 'lib.private';
-
-    copy1 $lib, emit "\n" if -f $lib;
 
     for my $exit qw/init start tcclear started stop stopped clear refresh refreshed restored/ {
 	emit "\nrun_${exit}_exit() {";
@@ -131,7 +139,7 @@ EOF
 #    Generate the 'initialize()' function.
 #
 #    Note: This function is not called when $command eq 'check'. So it must have no side effects other
-#          than those related to writing to the object file.
+#          than those related to writing to the output script file.
 
 sub generate_script_2() {
 
@@ -206,8 +214,7 @@ sub generate_script_2() {
 
     emit ( '[ -n "${COMMAND:=restart}" ]',
 	   '[ -n "${VERBOSE:=0}" ]',
-	   qq([ -n "\${RESTOREFILE:=$config{RESTOREFILE}}" ]),
-	   '[ -n "$LOGFORMAT" ] || LOGFORMAT="Shorewall:%s:%s:"' );
+	   qq([ -n "\${RESTOREFILE:=$config{RESTOREFILE}}" ]) );
 
     emit ( qq(VERSION="$globals{VERSION}") ) unless $test;
 
@@ -232,14 +239,24 @@ sub generate_script_2() {
 	   '[ -d ${VARDIR} ] || mkdir -p ${VARDIR}'
 	   );
 
+    pop_indent;
+
+    emit "\n}\n"; # End of initialize()
+
+    emit( '' ,
+	  '#' ,
+	  '# Set global variables holding detected IP information' ,
+	  '#' ,
+	  'detect_configuration()',
+	  '{' );
+
     my $global_variables = have_global_variables;
 
+    push_indent;
+
     if ( $global_variables ) {
-	emit( '' ,
-	      '#' ,
-	      '# Set global variables holding detected IP information' ,
-	      '#' ,
-	      'case $COMMAND in' );
+	
+	emit( 'case $COMMAND in' );
 
 	push_indent;
 
@@ -248,7 +265,7 @@ sub generate_script_2() {
 	} else {
 	    emit( 'start|restart|refresh|restore)' );
 	}
-	 
+
 	push_indent;
 
 	set_global_variables(1);
@@ -256,10 +273,10 @@ sub generate_script_2() {
 	handle_optional_interfaces;
 
 	emit ';;';
-    
+
 	if ( $global_variables == ( ALL_COMMANDS | NOT_RESTORE ) ) {
 	    pop_indent;
-	
+
 	    emit 'restore)';
 
 	    push_indent;
@@ -275,12 +292,14 @@ sub generate_script_2() {
 	pop_indent;
 
 	emit ( 'esac' ) ,
+    } else {
+	emit( 'true' ) unless handle_optional_interfaces;
     }
 
     pop_indent;
 
-    emit "\n}\n"; # End of initialize()
-
+    emit "\n}\n"; # End of detect_configuration()
+    
 }
 
 #
@@ -293,7 +312,7 @@ sub generate_script_2() {
 #    Generate the 'define_firewall()' function.
 #
 #    Note: This function is not called when $command eq 'check'. So it must have no side effects other
-#          than those related to writing to the object file.
+#          than those related to writing to the output script file.
 #
 sub generate_script_3($) {
 
@@ -364,7 +383,7 @@ sub generate_script_3($) {
 
 	    emit ( "    qt \$IPSET -L $_ -n || \$IPSET -N $_ iphash" ) for @ipsets;
 
-	    emit ( '' , 
+	    emit ( '' ,
 		   '    if $IPSET -S > ${VARDIR}/ipsets.tmp; then' ,
 		   '        grep -q "^-N" ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${VARDIR}/ipsets.save' ,
 		   '    fi' );
@@ -383,7 +402,7 @@ sub generate_script_3($) {
 	       '' );
 
 	mark_firewall_not_started;
-		       	       
+
 	emit ('',
 	       'delete_proxyarp',
 	       ''
@@ -402,23 +421,10 @@ sub generate_script_3($) {
 	emit "disable_ipv6\n" if $config{DISABLE_IPV6};
 
     } else {
-	emit ( '#',
-	       '# Recent kernels are difficult to configure -- we see state match omitted a lot so we check for it here',
-	       '#',
-	       'qt1 $IP6TABLES -N foox1234',
-	       'qt1 $IP6TABLES -A foox1234 -m state --state ESTABLISHED,RELATED -j ACCEPT',
-	       'result=$?',
-	       'qt1 $IP6TABLES -F foox1234',
-	       'qt1 $IP6TABLES -X foox1234',
-	       '[ $result = 0 ] || startup_error "Your kernel/ip6tables do not include state match support. No version of Shorewall6 will run on this system"',
+	emit ( '[ "$COMMAND" = refresh ] && run_refresh_exit || run_init_exit', 
 	       '' );
-
-	emit ( '[ "$COMMAND" = refresh ] && run_refresh_exit || run_init_exit',
-		   '',
-	       'qt1 $IP6TABLES -L shorewall -n && qt1 $IP6TABLES -F shorewall && qt1 $IP6TABLES -X shorewall',
-	       ''
-	     );
-
+	mark_firewall_not_started;
+	emit '';
     }
 
     emit qq(delete_tc1\n) if $config{CLEAR_TC};
@@ -440,6 +446,10 @@ sub generate_script_3($) {
     dump_zone_contents;
     emit_unindented '__EOF__';
 
+    emit 'cat > ${VARDIR}/policies << __EOF__';
+    save_policies;
+    emit_unindented '__EOF__';
+
     pop_indent;
 
     emit "fi\n";
@@ -526,14 +536,14 @@ EOF
 #
 sub compiler {
 
-    my ( $objectfile, $directory, $verbosity, $timestamp , $debug, $chains , $log , $log_verbosity ) = 
-       ( '',          '',         -1,          '',          0,      '',       '',   -1 );
+    my ( $scriptfilename, $directory, $verbosity, $timestamp , $debug, $chains , $log , $log_verbosity ) =
+       ( '',              '',         -1,          '',          0,      '',       '',   -1 );
 
     $export = 0;
     $test   = 0;
 
     sub validate_boolean( $ ) {
-	 my $val = numeric_value( shift ); 
+	 my $val = numeric_value( shift );
 	 defined($val) && ($val >= 0) && ($val < 2);
      }
 
@@ -547,7 +557,8 @@ sub compiler {
 	defined($val) && ($val == F_IPV4 || $val == F_IPV6);
     }
 
-    my %parms = ( object        => { store => \$objectfile },
+    my %parms = ( object        => { store => \$scriptfilename },    #Deprecated
+		  script        => { store => \$scriptfilename },
 		  directory     => { store => \$directory  },
 		  family        => { store => \$family    ,    validate => \&validate_family    } ,
 		  verbosity     => { store => \$verbosity ,    validate => \&validate_verbosity } ,
@@ -572,14 +583,17 @@ sub compiler {
 	${$ref->{store}} = $val;
     }
 
-    reinitialize if $reused++ || $family == F_IPV6;
+    #
+    # Now that we know the address family (IPv4/IPv6), we can initialize the other modules' globals
+    #
+    initialize_package_globals;
 
     if ( $directory ne '' ) {
 	fatal_error "$directory is not an existing directory" unless -d $directory;
 	set_shorewall_dir( $directory );
     }
 
-    set_verbose( $verbosity );
+    set_verbosity( $verbosity );
     set_log($log, $log_verbosity) if $log;
     set_timestamp( $timestamp );
     set_debug( $debug );
@@ -595,13 +609,17 @@ sub compiler {
     require_capability( 'XCONNMARK'       , 'HIGH_ROUTE_MARKS=Yes' , 's' )  if $config{HIGH_ROUTE_MARKS};
     require_capability( 'MANGLE_ENABLED'  , 'Traffic Shaping' , 's'      )  if $config{TC_ENABLED};
 
-    set_command( 'check', 'Checking', 'Checked' ) unless $objectfile;
-
-    initialize_chain_table;
-
-    unless ( $command eq 'check' ) {
-	create_temp_object( $objectfile , $export );
+    if ( $scriptfilename ) {
+	set_command( 'compile', 'Compiling', 'Compiled' );
+	create_temp_script( $scriptfilename , $export );
+    } else {
+	set_command( 'check', 'Checking', 'Checked' );
     }
+    #
+    # Chain table initialization depends on shorewall.conf and capabilities. So it must be deferred until
+    # shorewall.conf has been processed and the capabilities have been determined.
+    #
+    initialize_chain_table;
 
     #
     # Allow user to load Perl modules
@@ -639,11 +657,11 @@ sub compiler {
     #
     setup_notrack;
 
-    enable_object;
-    
-    unless ( $command eq 'check' ) {
+    enable_script;
+
+    if ( $scriptfilename ) {
 	#
-	# Place Header in the object
+	# Place Header in the script
 	#
 	generate_script_1;
 	#
@@ -657,7 +675,7 @@ sub compiler {
 	    );
 
 	push_indent;
-    } 
+    }
     #
     # Do all of the zone-independent stuff
     #
@@ -677,25 +695,24 @@ sub compiler {
     #
     setup_proxy_arp;
     #
-    # Handle MSS setings in the zones file
+    # Handle MSS settings in the zones file
     #
     setup_zone_mss;
 
-    unless ( $command eq 'check' ) {
+    if ( $scriptfilename ) {
 	emit 'return 0';
 	pop_indent;
 	emit '}';
     }
 
-    disable_object;
+    disable_script;
     #
     #                      R O U T I N G _ A N D _ T R A F F I C _ S H A P I N G
     #         (Writes the setup_routing_and_traffic_shaping() function to the compiled script)
     #
-    enable_object;
-    
-    unless ( $command eq 'check' ) {
+    enable_script;
 
+    if ( $scriptfilename ) {
 	emit(  "\n#",
 	       '# Setup routing and traffic shaping',
 	       '#',
@@ -713,12 +730,12 @@ sub compiler {
     #
     setup_tc;
 
-    unless ( $command eq 'check' ) {
+    if ( $scriptfilename ) {
 	pop_indent;
 	emit "}\n";
     }
 
-    disable_object;
+    disable_script;
     #
     #                                       N E T F I L T E R
     #       (Produces no output to the compiled script -- rules are stored in the chain table)
@@ -733,7 +750,7 @@ sub compiler {
 	#
 	# Setup Masquerading/SNAT
 	#
-	setup_masq; 
+	setup_masq;
 	#
 	# Setup Nat
 	#
@@ -774,22 +791,16 @@ sub compiler {
     #
     setup_accounting;
 
-    if ( $command eq 'check' ) {
-	if ( $family == F_IPV4 ) {
-	    progress_message3 "Shorewall configuration verified";
-	} else {
-	    progress_message3 "Shorewall6 configuration verified";
-	}
-    } else {
+    if ( $scriptfilename ) {
 	#
-	# Generate the zone x zone matrix
+	# Generate the zone by zone matrix
 	#
 	generate_matrix;
 
-	enable_object;
+	enable_script;
 	#
-	#                                    I N I T I A L I Z E
-	#                  (Writes the initialize() function to the compiled script)
+	#                             I N I T I A L I Z E
+	#           (Writes the initialize() function to the compiled script)
 	#
 	generate_script_2;
 	#
@@ -797,17 +808,19 @@ sub compiler {
 	#    (Produces setup_netfilter(), chainlist_reload() and define_firewall() )
 	#
 	generate_script_3( $chains );
-	#                               S T O P _ F I R E W A L L
-	#             (Writes the stop_firewall() function to the compiled script)
 	#
 	# We must reinitialize Shorewall::Chains before generating the iptables-restore input
 	# for stopping the firewall
 	#
 	Shorewall::Chains::initialize( $family );
 	initialize_chain_table;
-	compile_stop_firewall( $test ); 
 	#
-	# Copy the footer to the object
+	#                           S T O P _ F I R E W A L L
+	#         (Writes the stop_firewall() function to the compiled script)
+	#
+	compile_stop_firewall( $test );
+	#
+	# Copy the footer to the script
 	#
 	unless ( $test ) {
 	    if ( $family == F_IPV4 ) {
@@ -816,16 +829,34 @@ sub compiler {
 		copy $globals{SHAREDIRPL} . 'prog.footer6';
 	    }
 	}
-	
-	disable_object;
+
+	disable_script;
 	#
-	# Close, rename and secure the object
+	# Close, rename and secure the script
 	#
-	finalize_object ( $export );
+	finalize_script ( $export );
 	#
 	# And generate the auxilary config file
 	#
-	enable_object, generate_aux_config if $export;
+	enable_script, generate_aux_config if $export;
+    } else {
+	#
+	# Re-initialize the chain table so that process_routestopped() has the same
+	# environment that it would when called by compile_stop_firewall().
+	#
+	Shorewall::Chains::initialize( $family );
+	initialize_chain_table;
+	#
+	# compile_stop_firewall() also validates the routestopped file. Since we don't
+	# call that function during 'check', we must validate routestopped here.
+	#
+	process_routestopped;
+
+	if ( $family == F_IPV4 ) {
+	    progress_message3 "Shorewall configuration verified";
+	} else {
+	    progress_message3 "Shorewall6 configuration verified";
+	}
     }
 
     close_log if $log;

Shorewall/Perl/Shorewall/IPAddrs.pm

@@ -21,7 +21,7 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 #   This module provides interfaces for dealing with IPv4 addresses, protocol names, and
-#   port names. It also exports functions for validating protocol- and port- (service) 
+#   port names. It also exports functions for validating protocol- and port- (service)
 #   related constructs.
 #
 package Shorewall::IPAddrs;
@@ -34,10 +34,10 @@ use strict;
 our @ISA = qw(Exporter);
 our @EXPORT = qw( ALLIPv4
                   ALLIPv6
+	          IPv4_MULTICAST
 	          IPv6_MULTICAST
 	          IPv6_LINKLOCAL
 	          IPv6_SITELOCAL
-	          IPv6_LINKLOCAL
 	          IPv6_LOOPBACK
 	          IPv6_LINK_ALLNODES
 	          IPv6_LINK_ALLRTRS
@@ -72,28 +72,34 @@ our @EXPORT = qw( ALLIPv4
 		  validate_icmp6
 		 );
 our @EXPORT_OK = qw( );
-our $VERSION = '4.3_7';
+our $VERSION = '4.4_5';
 
 #
 # Some IPv4/6 useful stuff
 #
 our @allipv4 = ( '0.0.0.0/0' );
 our @allipv6 = ( '::/0' );
-our $family;
+our $allip;
+our @allip;
+our $valid_address;
+our $validate_address;
+our $validate_net;
+our $validate_range;
+our $validate_host;
 
 use constant { ALLIPv4             => '0.0.0.0/0' ,
 	       ALLIPv6             => '::/0' ,
+	       IPv4_MULTICAST      => '224.0.0.0/4' ,
 	       IPv6_MULTICAST      => 'FF00::/10' ,
 	       IPv6_LINKLOCAL      => 'FF80::/10' ,
 	       IPv6_SITELOCAL      => 'FFC0::/10' ,
-	       IPv6_LINKLOCAL      => 'FF80::/10' ,
 	       IPv6_LOOPBACK       => '::1' ,
 	       IPv6_LINK_ALLNODES  => 'FF01::1' ,
 	       IPv6_LINK_ALLRTRS   => 'FF01::2' ,
 	       IPv6_SITE_ALLNODES  => 'FF02::1' ,
 	       IPv6_SITE_ALLRTRS   => 'FF02::2' ,
-	       ICMP                => 1, 
-	       TCP                 => 6, 
+	       ICMP                => 1,
+	       TCP                 => 6,
 	       UDP                 => 17,
 	       DCCP                => 33,
 	       IPv6_ICMP           => 58,
@@ -101,23 +107,10 @@ use constant { ALLIPv4             => '0.0.0.0/0' ,
 
 our @rfc1918_networks = ( "10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16" );
 
+
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function.
+# Note: initialize() is declared at the bottom of the file
 #
-
-sub initialize( $ ) {
-    $family = shift;
-}
-
-INIT {
-    initialize( F_IPV4 );
-}
-
 sub vlsm_to_mask( $ ) {
     my $vlsm = $_[0];
 
@@ -207,7 +200,7 @@ sub validate_4net( $$ ) {
 	    ( decodeaddr( $net ) , $vlsm );
 	} else {
 	    "$net/$vlsm";
-	}	    
+	}
     }
 }
 
@@ -309,7 +302,7 @@ sub validate_port( $$ ) {
     my $value;
 
     if ( $port =~ /^(\d+)$/ ) {
-	return $port if $port <= 65535;
+	return $port if $port && $port <= 65535;
     } else {
 	$proto = proto_name $proto if $proto =~ /^(\d+)$/;
 	$value = getservbyname( $port, $proto );
@@ -398,7 +391,6 @@ my %icmp_types = ( any                          => 'any',
 		   'address-mask-reply'         => 18 );
 
 sub validate_icmp( $ ) {
-    fatal_error "IPv4 ICMP not allowed in an IPv6 Rule" unless $family == F_IPV4;
 
     my $type = $_[0];
 
@@ -445,7 +437,7 @@ sub expand_port_range( $$ ) {
 	# Break the range into groups:
 	#
 	#      - If the first port in the remaining range is odd, then the next group is ( <first>, ffff ).
-	#      - Otherwise, find the largest power of two P that divides the first address such that 
+	#      - Otherwise, find the largest power of two P that divides the first address such that
 	#        the remaining range has less than or equal to P ports. The next group is
 	#        ( <first> , ~( P-1 ) ).
 	#
@@ -471,8 +463,8 @@ sub expand_port_range( $$ ) {
 
     } else {
 	( sprintf( '%04x' , validate_port( $proto, $range ) ) , 'ffff' );
-    } 
-}   
+    }
+}
 
 sub valid_6address( $ ) {
     my $address = $_[0];
@@ -484,6 +476,7 @@ sub valid_6address( $ ) {
 	return 0 unless valid_4address pop @address;
 	$max = 6;
 	$address = join ':', @address;
+	return 1 if @address eq ':';
     } else {
 	$max = 8;
     }
@@ -492,16 +485,16 @@ sub valid_6address( $ ) {
     return 0 unless ( @address == $max ) || $address =~ /::/;
     return 0 if $address =~ /:::/ || $address =~ /::.*::/;
 
-    if ( $address =~ /^:/ ) {
-	unless ( $address eq '::' ) {
-	    return 0 if $address =~ /:$/ || $address =~ /^:.*::/;
-	}
-    } elsif ( $address =~ /:$/ ) {
-	return 0 if $address =~ /::.*:$/;
+    unless ( $address =~ /^::/ ) {
+	return 0 if $address =~ /^:/;
     }
 
+    unless ( $address =~ /::$/  ) {
+	return 0 if $address =~ /:$/;
+    }
+		 
     for my $a ( @address ) {
-	return 0 unless $a eq '' || ( $a =~ /^[a-fA-f\d]+$/ && oct "0x$a" < 65536 );
+	return 0 unless $a eq '' || ( $a =~ /^[a-fA-f\d]+$/ && length $a < 5 );
     }
 
     1;
@@ -550,13 +543,27 @@ sub validate_6net( $$ ) {
 sub normalize_6addr( $ ) {
     my $addr = shift;
 
-    while ( $addr =~ tr/:/:/ < 6 ) {
-	$addr =~ s/::/:0::/;
+    if ( $addr eq '::' ) {
+	'0:0:0:0:0:0:0:0';
+    } else {
+	#
+	# Suppress leading zeros
+	#
+	$addr =~ s/^0+//;
+	$addr =~ s/:0+/:/g;
+	$addr =~ s/^:/0:/;
+	$addr =~ s/:$/:0/;
+
+	$addr =~ s/::/:0::/ while $addr =~ tr/:/:/ < 7;
+	#
+	# Note: "s/::/:0:/g" doesn't work here
+	#
+	1 while $addr =~ s/::/:0:/;
+
+	$addr =~ s/^0+:/0:/;
+	
+	$addr;
     }
-
-    $addr =~ s/::/:0:/;
-
-    $addr;
 }
 
 sub validate_6range( $$ ) {
@@ -580,7 +587,7 @@ sub validate_6range( $$ ) {
 }
 
 sub validate_6host( $$ ) {
-    my ( $host, $allow_name )  = $_[0];
+    my ( $host, $allow_name )  = @_;
 
     if ( $host =~ /^(.*:.*)-(.*:.*)$/ ) {
 	validate_6range $1, $2;
@@ -614,7 +621,6 @@ my %ipv6_icmp_types = ( any                          => 'any',
 
 
 sub validate_icmp6( $ ) {
-    fatal_error "IPv6 ICMP not allowed in an IPv4 Rule" unless $family == F_IPV6;
     my $type = $_[0];
 
     my $value = $ipv6_icmp_types{$type};
@@ -629,31 +635,63 @@ sub validate_icmp6( $ ) {
 }
 
 sub ALLIP() {
-    $family == F_IPV4 ? ALLIPv4 : ALLIPv6;
+    $allip;
 }
 
 sub allip() {
-    $family == F_IPV4 ? ALLIPv4 : ALLIPv6;
-}    
+    @allip;
+}
 
 sub valid_address ( $ ) {
-    $family == F_IPV4 ? valid_4address( $_[0] ) :  valid_6address( $_[0] );
+    $valid_address->(@_);
 }
 
 sub validate_address ( $$ ) {
-    $family == F_IPV4 ? validate_4address( $_[0], $_[1] ) :  validate_6address( $_[0], $_[1] );
+    $validate_address->(@_);
 }
 
 sub validate_net ( $$ ) {
-    $family == F_IPV4 ? validate_4net( $_[0], $_[1] ) :  validate_6net( $_[0], $_[1] );
+    $validate_net->(@_);
 }
 
-sub validate_range ($$ ) { 
-    $family == F_IPV4 ? validate_4range( $_[0], $_[1] ) :  validate_6range( $_[0], $_[1] );
+sub validate_range ($$ ) {
+    $validate_range->(@_);
 }
 
-sub validate_host ($$ ) { 
-    $family == F_IPV4 ? validate_4host( $_[0], $_[1] ) :  validate_6host( $_[0], $_[1] );
+sub validate_host ($$ ) {
+    $validate_host->(@_);
+}
+
+#
+# Rather than initializing globals in an INIT block or during declaration,
+# we initialize them in a function. This is done for two reasons:
+#
+#   1. Proper initialization depends on the address family which isn't
+#      known until the compiler has started.
+#
+#   2. The compiler can run multiple times in the same process so it has to be
+#      able to re-initialize its dependent modules' state.
+#
+sub initialize( $ ) {
+    my $family = shift;
+
+    if ( $family == F_IPV4 ) {
+	$allip            = ALLIPv4;
+	@allip            = @allipv4;
+	$valid_address    = \&valid_4address;
+	$validate_address = \&validate_4address;
+	$validate_net     = \&validate_4net;
+	$validate_range   = \&validate_4range;
+	$validate_host    = \&validate_4host;
+    } else {
+	$allip            = ALLIPv6;
+	@allip            = @allipv6;
+	$valid_address    = \&valid_6address;
+	$validate_address = \&validate_6address;
+	$validate_net     = \&validate_6net;
+	$validate_range   = \&validate_6range;
+	$validate_host    = \&validate_6host;
+    }
 }
 
 1;

Shorewall/Perl/Shorewall/Nat.pm

@@ -29,7 +29,6 @@ use Shorewall::Config qw(:DEFAULT :internal);
 use Shorewall::IPAddrs;
 use Shorewall::Zones;
 use Shorewall::Chains qw(:DEFAULT :internal);
-use Shorewall::IPAddrs;
 use Shorewall::Providers qw( lookup_provider );
 
 use strict;
@@ -37,29 +36,19 @@ use strict;
 our @ISA = qw(Exporter);
 our @EXPORT = qw( setup_masq setup_nat setup_netmap add_addresses );
 our @EXPORT_OK = ();
-our $VERSION = '4.3_7';
+our $VERSION = '4.4_4';
 
 our @addresses_to_add;
 our %addresses_to_add;
 
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function.
+# Called by the compiler
 #
-
 sub initialize() {
     @addresses_to_add = ();
     %addresses_to_add = ();
 }
 
-INIT {
-    initialize;
-}
-
 #
 # Handle IPSEC Options in a masq record
 #
@@ -178,7 +167,6 @@ sub process_one_masq( )
     # Handle Protocol and Ports
     #
     $baserule .= do_proto $proto, $ports, '';
-
     #
     # Handle Mark
     #
@@ -207,7 +195,7 @@ sub process_one_masq( )
 	fatal_error "Unknown interface ($interface)" unless my $interfaceref = known_interface( $interface );
 
 	unless ( $interfaceref->{root} ) {
-	    $rule .= "-o $interface ";
+	    $rule .= match_dest_dev( $interface );
 	    $interface = $interfaceref->{name};
 	}
 
@@ -216,6 +204,7 @@ sub process_one_masq( )
 	my $detectaddress = 0;
 	my $exceptionrule = '';
 	my $randomize     = '';
+	my $persistent    = '';
 	#
 	# Parse the ADDRESSES column
 	#
@@ -223,7 +212,10 @@ sub process_one_masq( )
 	    if ( $addresses eq 'random' ) {
 		$randomize = '--random ';
 	    } else {
-		$addresses =~ s/:random$// and $randomize = '--random ';
+		$addresses =~ s/:persistent$// and $persistent = '--persistent ';
+		$addresses =~ s/:random$//     and $randomize  = '--random ';
+
+		require_capability 'PERSISTENT_SNAT', ':persistent', 's' if $persistent;
 
 		if ( $addresses =~ /^SAME/ ) {
 		    fatal_error "The SAME target is no longer supported";
@@ -247,7 +239,11 @@ sub process_one_masq( )
 			if ( $addr =~ /^.*\..*\..*\./ ) {
 			    $target = '-j SNAT ';
 			    my ($ipaddr, $rest) = split ':', $addr;
-			    validate_address $ipaddr, 0;
+			    if ( $ipaddr =~ /^(.+)-(.+)$/ ) {
+				validate_range( $1, $2 );
+			    } else {
+				validate_address $ipaddr, 0;
+			    }
 			    $addrlist .= "--to-source $addr ";
 			    $exceptionrule = do_proto( $proto, '', '' ) if $addr =~ /:/;
 			} else {
@@ -262,6 +258,7 @@ sub process_one_masq( )
 	    }
 
 	    $target .= $randomize;
+	    $target .= $persistent;
 	} else {
 	    $add_snat_aliases = 0;
 	}
@@ -293,7 +290,6 @@ sub process_one_masq( )
 		next if $addrs eq 'detect';
 		for my $addr ( ip_range_explicit $addrs ) {
 		    unless ( $addresses_to_add{$addr} ) {
-			emit "del_ip_addr $addr $interface" unless $config{RETAIN_ALIASES};
 			$addresses_to_add{$addr} = 1;
 			if ( defined $alias ) {
 			    push @addresses_to_add, $addr, "$interface:$alias";
@@ -371,8 +367,8 @@ sub do_one_nat( $$$$$ )
     fatal_error "Unknown interface ($interface)" unless my $interfaceref = known_interface( $interface );
 
     unless ( $interfaceref->{root} ) {
-	$rulein  = "-i $interface ";
-	$ruleout = "-o $interface ";
+	$rulein  = match_source_dev $interface;
+	$ruleout = match_dest_dev $interface;
 	$interface = $interfaceref->{name};
     }
 
@@ -464,8 +460,8 @@ sub setup_netmap() {
 	    fatal_error "Unknown interface ($interface)" unless my $interfaceref = find_interface( $interface );
 
 	    unless ( $interfaceref->{root} ) {
-		$rulein  = "-i $interface ";
-		$ruleout = "-o $interface ";
+		$rulein  = match_source_dev $interface;
+		$ruleout = match_dest_dev $interface;
 		$interface = $interfaceref->{name};
 	    }
 
@@ -485,12 +481,13 @@ sub setup_netmap() {
 
 sub add_addresses () {
     if ( @addresses_to_add ) {
+	my @addrs = @addresses_to_add;
 	my $arg = '';
 	my $addresses = 0;
 
-	while ( @addresses_to_add ) {
-	    my $addr      = shift @addresses_to_add;
-	    my $interface = shift @addresses_to_add;
+	while ( @addrs ) {
+	    my $addr      = shift @addrs;
+	    my $interface = shift @addrs;
 	    $arg = "$arg $addr $interface";
 	    unless ( $config{RETAIN_ALIASES} ) {
 		emit '' unless $addresses++;

Shorewall/Perl/Shorewall/Policy.pm

@@ -32,31 +32,21 @@ use Shorewall::Actions;
 use strict;
 
 our @ISA = qw(Exporter);
-our @EXPORT = qw( validate_policy apply_policy_rules complete_standard_chain setup_syn_flood_chains );
+our @EXPORT = qw( validate_policy apply_policy_rules complete_standard_chain setup_syn_flood_chains save_policies );
 our @EXPORT_OK = qw(  );
-our $VERSION = '4.3_7';
+our $VERSION = '4.4_4';
 
 # @policy_chains is a list of references to policy chains in the filter table
 
 our @policy_chains;
 
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function.
+# Called by the compiler
 #
-
 sub initialize() {
     @policy_chains = ();
 }
 
-INIT {
-    initialize;
-}
-
 #
 # Convert a chain into a policy chain.
 #
@@ -78,7 +68,7 @@ sub new_policy_chain($$$$)
 {
     my ($source, $dest, $policy, $optional) = @_;
 
-    my $chainref = new_chain( 'filter', "${source}2${dest}" );
+    my $chainref = new_chain( 'filter', rules_chain( ${source}, ${dest} ) );
 
     convert_to_policy_chain( $chainref, $source, $dest, $policy, $optional );
 
@@ -129,7 +119,7 @@ use constant { OPTIONAL => 1 };
 
 sub add_or_modify_policy_chain( $$ ) {
     my ( $zone, $zone1 ) = @_;
-    my $chain    = "${zone}2${zone1}";
+    my $chain    = rules_chain( ${zone}, ${zone1} );
     my $chainref = $filter_table->{$chain};
 
     if ( $chainref ) {
@@ -140,7 +130,7 @@ sub add_or_modify_policy_chain( $$ ) {
     } else {
 	push @policy_chains, ( new_policy_chain $zone, $zone1, 'CONTINUE', OPTIONAL );
     }
-}    
+}
 
 sub print_policy($$$$) {
     my ( $source, $dest, $policy , $chain ) = @_;
@@ -169,7 +159,7 @@ sub process_a_policy() {
     fatal_error "Undefined zone ($client)" unless $clientwild || defined_zone( $client );
 
     my $serverwild = ( "\L$server" eq 'all' );
-    
+
     fatal_error "Undefined zone ($server)" unless $serverwild || defined_zone( $server );
 
     my ( $policy, $default, $remainder ) = split( /:/, $originalpolicy, 3 );
@@ -203,7 +193,7 @@ sub process_a_policy() {
 
     if ( defined $queue ) {
 	fatal_error "Invalid policy ($policy($queue))" unless $policy eq 'NFQUEUE';
-	require_capability( 'NFQUEUE_TARGET', 'An NFQUEUE Policy', 's' ); 
+	require_capability( 'NFQUEUE_TARGET', 'An NFQUEUE Policy', 's' );
 	my $queuenum = numeric_value( $queue );
 	fatal_error "Invalid NFQUEUE queue number ($queue)" unless defined( $queuenum) && $queuenum <= 65535;
 	$policy = "NFQUEUE --queue-num $queuenum";
@@ -221,7 +211,7 @@ sub process_a_policy() {
 	}
     }
 
-    my $chain = "${client}2${server}";
+    my $chain = rules_chain( ${client}, ${server} );
     my $chainref;
 
     if ( defined $filter_table->{$chain} ) {
@@ -244,7 +234,7 @@ sub process_a_policy() {
 	$chainref = new_policy_chain $client, $server, $policy, 0;
 	push @policy_chains, ( $chainref ) unless $config{EXPAND_POLICIES} && ( $clientwild || $serverwild );
     }
-    
+
     $chainref->{loglevel}  = validate_level( $loglevel ) if defined $loglevel && $loglevel ne '';
 
     if ( $synparams ne '' || $connlimit ne '' ) {
@@ -262,27 +252,42 @@ sub process_a_policy() {
 	if ( $serverwild ) {
 	    for my $zone ( @zonelist ) {
 		for my $zone1 ( @zonelist ) {
-		    set_policy_chain $client, $server, "${zone}2${zone1}", $chainref, $policy;
+		    set_policy_chain $client, $server, rules_chain( ${zone}, ${zone1} ), $chainref, $policy;
 		    print_policy $zone, $zone1, $policy, $chain;
 		}
 	    }
 	} else {
 	    for my $zone ( all_zones ) {
-		set_policy_chain $client, $server, "${zone}2${server}", $chainref, $policy;
+		set_policy_chain $client, $server, rules_chain( ${zone}, ${server} ), $chainref, $policy;
 		print_policy $zone, $server, $policy, $chain;
 	    }
 	}
     } elsif ( $serverwild ) {
 	for my $zone ( @zonelist ) {
-	    set_policy_chain $client, $server, "${client}2${zone}", $chainref, $policy;
+	    set_policy_chain $client, $server, rules_chain( ${client}, ${zone} ), $chainref, $policy;
 	    print_policy $client, $zone, $policy, $chain;
 	}
-	
+
     } else {
 	print_policy $client, $server, $policy, $chain;
     }
 }
 
+sub save_policies() {
+    for my $zone1 ( all_zones ) {
+	for my $zone2 ( all_zones ) {
+	    my $chainref  = $filter_table->{ rules_chain( $zone1, $zone2 ) };
+	    my $policyref = $filter_table->{ $chainref->{policychain} };
+
+	    if ( $policyref->{referenced} ) {
+		emit_unindented "$zone1 \t=>\t$zone2\t" . $policyref->{policy} . ' using chain ' . $policyref->{name};
+	    } elsif ( $zone1 ne $zone2 ) {
+		emit_unindented "$zone1 \t=>\t$zone2\t" . $policyref->{policy};
+	    }
+	}
+    }
+}	    
+
 sub validate_policy()
 {
     our %validpolicies = (
@@ -344,7 +349,7 @@ sub validate_policy()
 
     for $zone ( all_zones ) {
 	for my $zone1 ( all_zones ) {
-	    fatal_error "No policy defined from zone $zone to zone $zone1" unless $filter_table->{"${zone}2${zone1}"}{policy};
+	    fatal_error "No policy defined from zone $zone to zone $zone1" unless $filter_table->{rules_chain( ${zone}, ${zone1} )}{policy};
 	}
     }
 }
@@ -356,7 +361,7 @@ sub policy_rules( $$$$$ ) {
     my ( $chainref , $target, $loglevel, $default, $dropmulticast ) = @_;
 
     unless ( $target eq 'NONE' ) {
-	add_rule $chainref, "-d 224.0.0.0/24 -j RETURN" if $dropmulticast && $target ne 'CONTINUE' && $target ne 'ACCEPT';
+	add_rule $chainref, "-d 224.0.0.0/4 -j RETURN" if $dropmulticast && $target ne 'CONTINUE' && $target ne 'ACCEPT';
 	add_rule $chainref, "-j $default" if $default && $default ne 'none';
 	log_rule $loglevel , $chainref , $target , '' if $loglevel ne '';
 	fatal_error "Null target in policy_rules()" unless $target;
@@ -419,7 +424,7 @@ sub apply_policy_rules() {
 		ensure_filter_chain $name, 1;
 	    }
 
-	    if ( $name =~ /^all2|2all$/ ) {
+	    if ( $name =~ /^all[-2]|[-2]all$/ ) {
 		run_user_exit $chainref;
 		policy_rules $chainref , $policy, $loglevel , $default, $config{MULTICAST};
 	    }
@@ -428,7 +433,7 @@ sub apply_policy_rules() {
 
     for my $zone ( all_zones ) {
 	for my $zone1 ( all_zones ) {
-	    my $chainref = $filter_table->{"${zone}2${zone1}"};
+	    my $chainref = $filter_table->{rules_chain( ${zone}, ${zone1} )};
 
 	    if ( $chainref->{referenced} ) {
 		run_user_exit $chainref;
@@ -454,7 +459,7 @@ sub complete_standard_chain ( $$$$ ) {
 
     run_user_exit $stdchainref;
 
-    my $ruleschainref = $filter_table->{"${zone}2${zone2}"} || $filter_table->{all2all};
+    my $ruleschainref = $filter_table->{rules_chain( ${zone}, ${zone2} ) } || $filter_table->{rules_chain( 'all', 'all' ) };
     my ( $policy, $loglevel, $defaultaction ) = ( $default , 6, $config{$default . '_DEFAULT'} );
     my $policychainref;
 

Shorewall/Perl/Shorewall/Proc.pm

@@ -41,7 +41,7 @@ our @EXPORT = qw(
 		 setup_forwarding
 		 );
 our @EXPORT_OK = qw( );
-our $VERSION = '4.3_12';
+our $VERSION = '4.4_4';
 
 #
 # ARP Filtering
@@ -56,27 +56,35 @@ sub setup_arp_filtering() {
 	save_progress_message "Setting up ARP filtering...";
 
 	for my $interface ( @$interfaces ) {
-	    my $file = "/proc/sys/net/ipv4/conf/$interface/arp_filter";
 	    my $value = get_interface_option $interface, 'arp_filter';
+	    my $optional = interface_is_optional $interface;
+                           
+	    $interface = get_physical $interface;
+
+	    my $file = "/proc/sys/net/ipv4/conf/$interface/arp_filter";
 
 	    emit ( '',
 		   "if [ -f $file ]; then",
 		   "    echo $value > $file");
 	    emit ( 'else',
-		   "    error_message \"WARNING: Cannot set ARP filtering on $interface\"" ) unless interface_is_optional( $interface );
+		   "    error_message \"WARNING: Cannot set ARP filtering on $interface\"" ) unless $optional;
 	    emit   "fi\n";
 	}
 
 	for my $interface ( @$interfaces1 ) {
-	    my $file  = "/proc/sys/net/ipv4/conf/$interface/arp_ignore";
 	    my $value = get_interface_option $interface, 'arp_ignore';
+	    my $optional = interface_is_optional $interface;
+                           
+	    $interface = get_physical $interface;
+
+	    my $file  = "/proc/sys/net/ipv4/conf/$interface/arp_ignore";
 
 	    assert( defined $value );
 
 	    emit ( "if [ -f $file ]; then",
 		   "    echo $value > $file");
 	    emit ( 'else',
-		   "    error_message \"WARNING: Cannot set ARP filtering on $interface\"" ) unless interface_is_optional( $interface );
+		   "    error_message \"WARNING: Cannot set ARP filtering on $interface\"" ) unless $optional;
 	    emit   "fi\n";
 	}
     }
@@ -88,16 +96,18 @@ sub setup_arp_filtering() {
 sub setup_route_filtering() {
 
     my $interfaces = find_interfaces_by_option 'routefilter';
+    my $config     = $config{ROUTE_FILTER};
 
-    if ( @$interfaces || $config{ROUTE_FILTER} ) {
+    if ( @$interfaces || $config ) {
 
 	progress_message2 "$doing Kernel Route Filtering...";
 
 	save_progress_message "Setting up Route Filtering...";
 
+	my $val = '';
 
-	if ( $config{ROUTE_FILTER} ) {
-	    my $val = $config{ROUTE_FILTER} eq 'on' ? 1 : 0;
+	if ( $config{ROUTE_FILTER} ne '' ) {
+	    $val = $config eq 'on' ? 1 : $config eq 'off' ? 0 : $config;
 
 	    emit ( 'for file in /proc/sys/net/ipv4/conf/*; do',
 		   "    [ -f \$file/rp_filter ] && echo $val > \$file/rp_filter",
@@ -106,24 +116,28 @@ sub setup_route_filtering() {
 	}
 
 	for my $interface ( @$interfaces ) {
-	    my $file = "/proc/sys/net/ipv4/conf/$interface/rp_filter";
 	    my $value = get_interface_option $interface, 'routefilter';
+	    my $optional = interface_is_optional $interface;
+                           
+	    $interface = get_physical $interface;
+
+	    my $file = "/proc/sys/net/ipv4/conf/$interface/rp_filter";
 
 	    emit ( "if [ -f $file ]; then" ,
 		   "    echo $value > $file" );
 	    emit ( 'else' ,
-		   "    error_message \"WARNING: Cannot set route filtering on $interface\"" ) unless interface_is_optional( $interface);
+		   "    error_message \"WARNING: Cannot set route filtering on $interface\"" ) unless $optional;
 	    emit   "fi\n";
 	}
 
-	emit 'echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter';
-
-	if ( $config{ROUTE_FILTER} eq 'on' ) {
-	    emit 'echo 1 > /proc/sys/net/ipv4/conf/default/rp_filter';
-	} elsif (  $config{ROUTE_FILTER} eq 'off' ) {
-	    emit 'echo 0 > /proc/sys/net/ipv4/conf/default/rp_filter';
+	if ( $capabilities{KERNELVERSION} < 20631 ) {
+	    emit 'echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter';
+	} elsif ( $val ne '' ) {
+	    emit "echo $val > /proc/sys/net/ipv4/conf/all/rp_filter";
 	}
 
+	emit "echo $val > /proc/sys/net/ipv4/conf/default/rp_filter" if $val ne '';
+
 	emit "[ -n \"\$NOROUTES\" ] || \$IP -4 route flush cache";
     }
 }
@@ -153,14 +167,18 @@ sub setup_martian_logging() {
 	}
 
 	for my $interface ( @$interfaces ) {
-	    my $file = "/proc/sys/net/ipv4/conf/$interface/log_martians";
 	    my $value = get_interface_option $interface, 'logmartians';
+	    my $optional = interface_is_optional $interface;
+                           
+	    $interface = get_physical $interface;
+
+	    my $file = "/proc/sys/net/ipv4/conf/$interface/log_martians";
 
 	    emit ( "if [ -f $file ]; then" ,
 		   "    echo $value > $file" );
 
 	    emit ( 'else' ,
-		   "    error_message \"WARNING: Cannot set Martian logging on $interface\"") unless interface_is_optional( $interface);
+		   "    error_message \"WARNING: Cannot set Martian logging on $interface\"") unless $optional;
 	    emit   "fi\n";
 	}
     }
@@ -180,13 +198,17 @@ sub setup_source_routing( $ ) {
 	save_progress_message 'Setting up Accept Source Routing...';
 
 	for my $interface ( @$interfaces ) {
-	    my $file = "/proc/sys/net/ipv$family/conf/$interface/accept_source_route";
 	    my $value = get_interface_option $interface, 'sourceroute';
+	    my $optional = interface_is_optional $interface;
+
+	    $interface = get_physical $interface;
+
+	    my $file = "/proc/sys/net/ipv$family/conf/$interface/accept_source_route";
 
 	    emit ( "if [ -f $file ]; then" ,
 		   "    echo $value > $file" );
 	    emit ( 'else' ,
-		   "    error_message \"WARNING: Cannot set Accept Source Routing on $interface\"" ) unless interface_is_optional( $interface);
+		   "    error_message \"WARNING: Cannot set Accept Source Routing on $interface\"" ) unless $optional;
 	    emit   "fi\n";
 	}
     }
@@ -227,13 +249,17 @@ sub setup_forwarding( $$ ) {
 	    save_progress_message 'Setting up IPv6 Interface Forwarding...';
 
 	    for my $interface ( @$interfaces ) {
-		my $file = "/proc/sys/net/ipv6/conf/$interface/forwarding";
 		my $value = get_interface_option $interface, 'forward';
+		my $optional = interface_is_optional $interface;
+
+		$interface = get_physical $interface;
+
+		my $file = "/proc/sys/net/ipv6/conf/$interface/forwarding";
 
 		emit ( "if [ -f $file ]; then" ,
 		       "    echo $value > $file" );
 		emit ( 'else' ,
-		       "    error_message \"WARNING: Cannot set IPv6 forwarding on $interface\"" ) unless interface_is_optional( $interface);
+		       "    error_message \"WARNING: Cannot set IPv6 forwarding on $interface\"" ) unless $optional;
 		emit   "fi\n";
 	    }
 

Shorewall/Perl/Shorewall/Providers.pm

@@ -35,7 +35,7 @@ use strict;
 our @ISA = qw(Exporter);
 our @EXPORT = qw( setup_providers @routemarked_interfaces handle_stickiness handle_optional_interfaces );
 our @EXPORT_OK = qw( initialize lookup_provider );
-our $VERSION = '4.4_0';
+our $VERSION = '4.4_4';
 
 use constant { LOCAL_TABLE   => 255,
 	       MAIN_TABLE    => 254,
@@ -62,14 +62,15 @@ our $family;
 use constant { ROUTEMARKED_SHARED => 1, ROUTEMARKED_UNSHARED => 2 };
 
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function.
+# Rather than initializing globals in an INIT block or during declaration,
+# we initialize them in a function. This is done for two reasons:
+#
+#   1. Proper initialization depends on the address family which isn't
+#      known until the compiler has started.
+#
+#   2. The compiler can run multiple times in the same process so it has to be
+#      able to re-initialize its dependent modules' state.
 #
-
 sub initialize( $ ) {
     $family = shift;
 
@@ -89,17 +90,13 @@ sub initialize( $ ) {
     @providers = ();
 }
 
-INIT {
-    initialize( F_IPV4 );
-}
-
 #
 # Set up marking for 'tracked' interfaces.
 #
 sub setup_route_marking() {
     my $mask = $config{HIGH_ROUTE_MARKS} ? $config{WIDE_TC_MARKS} ? '0xFF0000' : '0xFF00' : '0xFF';
 
-    require_capability( $_ , 'the provider \'track\' option' , 's' ) for qw/CONNMARK_MATCH CONNMARK/;
+    require_capability( $_ , q(The provider 'track' option) , 's' ) for qw/CONNMARK_MATCH CONNMARK/;
 
     add_rule $mangle_table->{$_} , "-m connmark ! --mark 0/$mask -j CONNMARK --restore-mark --mask $mask" for qw/PREROUTING OUTPUT/;
 
@@ -111,33 +108,21 @@ sub setup_route_marking() {
 
     for my $providerref ( @routemarked_providers ) {
 	my $interface = $providerref->{interface};
+	my $physical  = $providerref->{physical};
 	my $mark      = $providerref->{mark};
-	my $base      = uc chain_base $interface;
-
-	if ( $providerref->{optional} ) {
-	    if ( $providerref->{shared} ) {
-		add_commands( $chainref, qq(if [ interface_is_usable $interface -a -n "$providerref->{mac}" ]; then) );
-	    } else {
-		add_commands( $chainref, qq(if [ -n "\$${base}_IS_USABLE" ]; then) );
-	    }
-		
-	    incr_cmd_level( $chainref );
-	}
 
 	unless ( $marked_interfaces{$interface} ) {
-	    add_rule $mangle_table->{PREROUTING} , "-i $interface -m mark --mark 0/$mask -j routemark";
-	    add_jump $mangle_table->{PREROUTING} , $chainref1, 0, "! -i $interface -m mark --mark  $mark/$mask ";
+	    add_rule $mangle_table->{PREROUTING} , "-i $physical -m mark --mark 0/$mask -j routemark";
+	    add_jump $mangle_table->{PREROUTING} , $chainref1, 0, "! -i $physical -m mark --mark  $mark/$mask ";
 	    add_jump $mangle_table->{OUTPUT}     , $chainref2, 0, "-m mark --mark  $mark/$mask ";
 	    $marked_interfaces{$interface} = 1;
 	}
 
 	if ( $providerref->{shared} ) {
-	    add_rule $chainref, " -i $interface -m mac --mac-source $providerref->{mac} -j MARK --set-mark $providerref->{mark}";
+	    add_rule $chainref, match_source_dev( $interface ) . "-m mac --mac-source $providerref->{mac} -j MARK --set-mark $providerref->{mark}";
 	} else {
-	    add_rule $chainref, " -i $interface -j MARK --set-mark $providerref->{mark}";
+	    add_rule $chainref, match_source_dev( $interface ) . "-j MARK --set-mark $providerref->{mark}";
 	}
-
-	decr_cmd_level( $chainref), add_commands( $chainref, "fi" ) if $providerref->{optional};
     }
 
     add_rule $chainref, "-m mark ! --mark 0/$mask -j CONNMARK --save-mark --mask $mask";
@@ -145,11 +130,15 @@ sub setup_route_marking() {
 
 sub copy_table( $$$ ) {
     my ( $duplicate, $number, $realm ) = @_;
+    #
+    # Hack to work around problem in iproute
+    #
+    my $filter = $family == F_IPV6 ? q(sed 's/ via :: / /' | ) : '';
 
     if ( $realm ) {
 	emit  ( "\$IP -$family route show table $duplicate | sed -r 's/ realm [[:alnum:]_]+//' | while read net route; do" )
     } else {
-	emit  ( "\$IP -$family route show table $duplicate | while read net route; do" )
+	emit  ( "\$IP -$family route show table $duplicate | ${filter}while read net route; do" )
     }
 
     emit ( '    case $net in',
@@ -165,11 +154,23 @@ sub copy_table( $$$ ) {
 
 sub copy_and_edit_table( $$$$ ) {
     my ( $duplicate, $number, $copy, $realm) = @_;
+    #
+    # Hack to work around problem in iproute
+    #    
+    my $filter = $family == F_IPV6 ? q(sed 's/ via :: / /' | ) : '';
+    #
+    # Map physical names in $copy to logical names
+    #
+    $copy = join( '|' , map( physical_name($_) , split( ',' , $copy ) ) );
+    #
+    # Shell and iptables use a different wildcard character
+    #
+    $copy =~ s/\+/*/;
 
     if ( $realm ) {
-	emit  ( "\$IP -$family route show table $duplicate | sed -r 's/ realm [[:alnum:]_]+//' | while read net route; do" )
+	emit  ( "\$IP -$family route show table $duplicate | sed -r 's/ realm [[:alnum:]]+//' | while read net route; do" )
     } else {
-	emit  ( "\$IP -$family route show table $duplicate | while read net route; do" )
+	emit  ( "\$IP -$family route show table $duplicate | ${filter}while read net route; do" )
     }
 
     emit (  '    case $net in',
@@ -273,9 +274,10 @@ sub add_a_provider( ) {
     }
 
     fatal_error "Unknown Interface ($interface)" unless known_interface $interface;
-    
-    my $provider    = chain_base $table;
-    my $base        = uc chain_base $interface;
+    fatal_error "A bridge port ($interface) may not be configured as a provider interface" if port_to_bridge $interface;
+
+    my $physical    = get_physical $interface;
+    my $base        = uc chain_base $physical;
     my $gatewaycase = '';
 
     if ( $gateway eq 'detect' ) {
@@ -319,12 +321,15 @@ sub add_a_provider( ) {
 
     }
 
-    my ( $loose, $track, $balance , $default, $default_balance, $optional, $mtu ) = (0,0,0,0,$config{USE_DEFAULT_RT} ? 1 : 0,interface_is_optional( $interface ), '' );
+    my ( $loose, $track,                   $balance , $default, $default_balance,                $optional,                           $mtu ) = 
+	(0,      $config{TRACK_PROVIDERS}, 0 ,        0,        $config{USE_DEFAULT_RT} ? 1 : 0, interface_is_optional( $interface ), '' );
 
     unless ( $options eq '-' ) {
 	for my $option ( split_list $options, 'option' ) {
 	    if ( $option eq 'track' ) {
 		$track = 1;
+	    } elsif ( $option eq 'notrack' ) {
+		$track = 0;
 	    } elsif ( $option =~ /^balance=(\d+)$/ ) {
 		fatal_error q('balance' is not available in IPv6) if $family == F_IPV6;
 		$balance = $1;
@@ -375,6 +380,7 @@ sub add_a_provider( ) {
 			   number      => $number ,
 			   mark        => $val ? in_hex($val) : $val ,
 			   interface   => $interface ,
+			   physical    => $physical ,
 			   optional    => $optional ,
 			   gateway     => $gateway ,
 			   gatewaycase => $gatewaycase ,
@@ -398,23 +404,23 @@ sub add_a_provider( ) {
     my $realm = '';
 
     fatal_error "Interface $interface is already associated with non-shared provider $provider_interfaces{$interface}" if $provider_interfaces{$table};
-    
+
     if ( $shared ) {
 	my $variable = $providers{$table}{mac} = get_interface_mac( $gateway, $interface , $table );
 	$realm = "realm $number";
-	start_provider( $table, $number, qq(if interface_is_usable $interface && [ -n "$variable" ]; then) );
+	start_provider( $table, $number, qq(if interface_is_usable $physical && [ -n "$variable" ]; then) );
     } else {
 	if ( $optional ) {
 	    start_provider( $table, $number, qq(if [ -n "\$${base}_IS_USABLE" ]; then) );
 	} elsif ( $gatewaycase eq 'detect' ) {
-	    start_provider( $table, $number, qq(if interface_is_usable $interface && [ -n "$gateway" ]; then) );
+	    start_provider( $table, $number, qq(if interface_is_usable $physical && [ -n "$gateway" ]; then) );
 	} else {
-	    start_provider( $table, $number, "if interface_is_usable $interface; then" );
+	    start_provider( $table, $number, "if interface_is_usable $physical; then" );
 	}
-	
+
 	$provider_interfaces{$interface} = $table;
 
-	emit "run_ip route add default dev $interface table $number" if $gatewaycase eq 'none';
+	emit "run_ip route add default dev $physical table $number" if $gatewaycase eq 'none';
     }
 
     if ( $mark ne '-' ) {
@@ -433,8 +439,7 @@ sub add_a_provider( ) {
 	    if ( $copy eq 'none' ) {
 		$copy = $interface;
 	    } else {
-		$copy =~ tr/,/|/;
-		$copy = "$interface|$copy";
+		$copy = "$interface,$copy";
 	    }
 
 	    copy_and_edit_table( $duplicate, $number ,$copy , $realm);
@@ -446,28 +451,28 @@ sub add_a_provider( ) {
 
     if ( $gateway ) {
 	$address = get_interface_address $interface unless $address;
-	emit "run_ip route replace $gateway src $address dev $interface ${mtu}table $number $realm";
-	emit "run_ip route add default via $gateway src $address dev $interface ${mtu}table $number $realm";
+	emit "run_ip route replace $gateway src $address dev $physical ${mtu}table $number $realm";
+	emit "run_ip route add default via $gateway src $address dev $physical ${mtu}table $number $realm";
     }
 
-    balance_default_route $balance , $gateway, $interface, $realm if $balance;
+    balance_default_route $balance , $gateway, $physical, $realm if $balance;
 
     if ( $default > 0 ) {
-	balance_fallback_route $default , $gateway, $interface, $realm;
+	balance_fallback_route $default , $gateway, $physical, $realm;
     } elsif ( $default ) {
 	emit '';
 	if ( $gateway ) {
-	    emit qq(run_ip route replace default via $gateway src $address dev $interface table ) . DEFAULT_TABLE . qq( dev $interface metric $number);
-	    emit qq(echo "qt \$IP route del default via $gateway table ) . DEFAULT_TABLE . qq(" >> \${VARDIR}/undo_routing);
+	    emit qq(run_ip route replace default via $gateway src $address dev $physical table ) . DEFAULT_TABLE . qq( metric $number);
+	    emit qq(echo "qt \$IP -$family route del default via $gateway table ) . DEFAULT_TABLE . qq(" >> \${VARDIR}/undo_routing);
 	} else {
-	    emit qq(run_ip route add default table ) . DEFAULT_TABLE . qq( dev $interface metric $number);
-	    emit qq(echo "qt \$IP route del default dev $interface table ) . DEFAULT_TABLE . qq(" >> \${VARDIR}/undo_routing);
+	    emit qq(run_ip route add default table ) . DEFAULT_TABLE . qq( dev $physical metric $number);
+	    emit qq(echo "qt \$IP -$family route del default dev $physical table ) . DEFAULT_TABLE . qq(" >> \${VARDIR}/undo_routing);
 	}
     }
 
     if ( $loose ) {
 	if ( $config{DELETE_THEN_ADD} ) {
-	    emit ( "\nfind_interface_addresses $interface | while read address; do",
+	    emit ( "\nfind_interface_addresses $physical | while read address; do",
 		   "    qt \$IP -$family rule del from \$address",
 		   'done'
 		 );
@@ -481,7 +486,7 @@ sub add_a_provider( ) {
 
 	emit "\nrulenum=0\n";
 
-	emit  ( "find_interface_addresses $interface | while read address; do" );
+	emit  ( "find_interface_addresses $physical | while read address; do" );
 	emit  (	"    qt \$IP -$family rule del from \$address" ) if $config{DELETE_THEN_ADD};
 	emit  (	"    run_ip rule add from \$address pref \$(( $rulebase + \$rulenum )) table $number",
 		"    echo \"qt \$IP -$family rule del from \$address\" >> \${VARDIR}/undo_routing",
@@ -497,15 +502,15 @@ sub add_a_provider( ) {
 
     if ( $optional ) {
 	if ( $shared ) {
-	    emit ( "    error_message \"WARNING: Interface $interface is not usable -- Provider $table ($number) not Added\"" );
-	} else {
 	    emit ( "    error_message \"WARNING: Gateway $gateway is not reachable -- Provider $table ($number) not Added\"" );
+	} else {
+	    emit ( "    error_message \"WARNING: Interface $physical is not usable -- Provider $table ($number) not Added\"" );
 	}
     } else {
 	if ( $shared ) {
 	    emit( "    fatal_error \"Gateway $gateway is not reachable -- Provider $table ($number) Cannot be Added\"" );
 	} else {
-	    emit( "    fatal_error \"Interface $interface is not usable -- Provider $table ($number) Cannot be Added\"" );
+	    emit( "    fatal_error \"Interface $physical is not usable -- Provider $table ($number) Cannot be Added\"" );
 	}
     }
 
@@ -516,9 +521,32 @@ sub add_a_provider( ) {
     progress_message "   Provider \"$currentline\" $done";
 }
 
+#
+# Begin an 'if' statement testing whether the passed interface is available
+#
+sub start_new_if( $ ) {
+    our $current_if = shift;
+
+    emit ( '', qq(if [ -n "\$${current_if}_IS_USABLE" ]; then) );
+    push_indent;
+}
+  
+#
+# Complete any current 'if' statement in the output script
+#
+sub finish_current_if() {
+    if ( our $current_if ) {
+	pop_indent;
+	emit ( "fi\n" );
+	$current_if = '';
+    }
+}
+
 sub add_an_rtrule( ) {
     my ( $source, $dest, $provider, $priority ) = split_line 4, 4, 'route_rules file';
 
+    our $current_if;
+
     unless ( $providers{$provider} ) {
 	my $found = 0;
 
@@ -540,7 +568,7 @@ sub add_an_rtrule( ) {
     fatal_error "You must specify either the source or destination in a route_rules entry" if $source eq '-' && $dest eq '-';
 
     if ( $dest eq '-' ) {
-	$dest = 'to ' . ALLIP; 
+	$dest = 'to ' . ALLIP;
     } else {
 	validate_net( $dest, 0 );
 	$dest = "to $dest";
@@ -553,6 +581,7 @@ sub add_an_rtrule( ) {
 	    ( my $interface, $source , my $remainder ) = split( /:/, $source, 3 );
 	    fatal_error "Invalid SOURCE" if defined $remainder;
 	    validate_net ( $source, 0 );
+	    $interface = physical_name $interface;
 	    $source = "iif $interface from $source";
 	} elsif ( $source =~ /\..*\..*/ ) {
 	    validate_net ( $source, 0 );
@@ -563,6 +592,7 @@ sub add_an_rtrule( ) {
     } elsif ( $source =~  /^(.+?):<(.+)>\s*$/ ) {
 	my ($interface, $source ) = ($1, $2);
 	validate_net ($source, 0);
+	$interface = physical_name $interface;
 	$source = "iif $interface from $source";
     } elsif (  $source =~ /:.*:/ || $source =~ /\..*\..*/ ) {
 	validate_net ( $source, 0 );
@@ -575,21 +605,21 @@ sub add_an_rtrule( ) {
 
     $priority = "priority $priority";
 
-    emit ( "qt \$IP -$family rule del $source $dest $priority" ) if $config{DELETE_THEN_ADD};
+    finish_current_if, emit ( "qt \$IP -$family rule del $source $dest $priority" ) if $config{DELETE_THEN_ADD};
 
     my ( $optional, $number ) = ( $providers{$provider}{optional} , $providers{$provider}{number} );
 
     if ( $optional ) {
-	my $base = uc chain_base( $providers{$provider}{interface} );
-	emit ( '', "if [ -n \$${base}_IS_USABLE ]; then" );
-	push_indent;
+	my $base = uc chain_base( $providers{$provider}{physical} );
+	finish_current_if if $base ne $current_if;
+	start_new_if( $base ) unless $current_if;
+  } else {
+	finish_current_if;
     }
 
     emit ( "run_ip rule add $source $dest $priority table $number",
 	   "echo \"qt \$IP -$family rule del $source $dest $priority\" >> \${VARDIR}/undo_routing" );
 
-    pop_indent, emit ( "fi\n" ) if $optional;
-
     progress_message "   Routing rule \"$currentline\" $done";
 }
 
@@ -602,12 +632,12 @@ sub setup_null_routing() {
     for ( rfc1918_networks ) {
 	emit( qq(run_ip route replace unreachable $_) );
 	emit( qq(echo "qt \$IP -$family route del unreachable $_" >> \${VARDIR}/undo_routing) );
-    } 
+    }
 }
 
 sub start_providers() {
     require_capability( 'MANGLE_ENABLED' , 'a non-empty providers file' , 's' );
-    
+
     emit  ( '#',
 	    '# Undo any changes made since the last time that we [re]started -- this will not restore the default route',
 	    '#',
@@ -619,7 +649,7 @@ sub start_providers() {
 	       '# Save current routing table database so that it can be restored later',
 	       '#',
 	       'cp /etc/iproute2/rt_tables ${VARDIR}/' );
-	
+
     }
 
     emit  ( '#',
@@ -630,9 +660,9 @@ sub start_providers() {
 	    '# Initialize the file that holds \'undo\' commands',
 	    '#',
 	    '> ${VARDIR}/undo_routing' );
-    
+
     save_progress_message 'Adding Providers...';
-    
+
     emit 'DEFAULT_ROUTE=';
     emit 'FALLBACK_ROUTE=';
     emit '';
@@ -663,7 +693,7 @@ sub finish_providers() {
 	} else {
 	    emit qq(    qt \$IP -$family route del default table $table && error_message "WARNING: Default route deleted from table $table");
 	}
-	
+
 	emit(   'fi',
 		'' );
     } else {
@@ -723,12 +753,15 @@ sub setup_providers() {
 	my $fn = open_file 'route_rules';
 
 	if ( $fn ) {
+	    our $current_if = '';
 
 	    first_entry "$doing $fn...";
 
 	    emit '';
-	    
+
 	    add_an_rtrule while read_a_line;
+
+	    finish_current_if;
 	}
 
 	setup_null_routing if $config{NULL_ROUTE_RFC1918};
@@ -744,10 +777,10 @@ sub setup_providers() {
 	emit "\nif [ -z \"\$NOROUTES\" ]; then";
 
 	push_indent;
-	
+
 	emit "\nundo_routing";
 	emit 'restore_default_route';
-	
+
 	if ( $config{NULL_ROUTE_RFC1918} ) {
 	    emit  ( '#',
 		    '# Initialize the file that holds \'undo\' commands',
@@ -784,18 +817,21 @@ sub lookup_provider( $ ) {
 }
 
 #
-# This function is called by the compiler when it is generating the initialize() function.
+# This function is called by the compiler when it is generating the detect_configuration() function.
 # The function emits code to set the ..._IS_USABLE interface variables appropriately for the
 # optional interfaces
 #
+# Returns true if there were optional interfaces
+#
 sub handle_optional_interfaces() {
 
     my $interfaces = find_interfaces_by_option 'optional';
 
     if ( @$interfaces ) {
 	for my $interface ( @$interfaces ) {
-	    my $base  = uc chain_base( $interface );
 	    my $provider = $provider_interfaces{$interface};
+	    my $physical = get_physical $interface;
+	    my $base     = uc chain_base( $physical );
 
 	    emit '';
 
@@ -806,15 +842,15 @@ sub handle_optional_interfaces() {
 		my $providerref = $providers{$provider};
 
 		if ( $providerref->{gatewaycase} eq 'detect' ) {
-		    emit qq(if interface_is_usable $interface && [ -n "$providerref->{gateway}" ]; then);
+		    emit qq(if interface_is_usable $physical && [ -n "$providerref->{gateway}" ]; then);
 		} else {
-		    emit qq(if interface_is_usable $interface; then);
+		    emit qq(if interface_is_usable $physical; then);
 		}
 	    } else {
 		#
 		# Not a provider interface
 		#
-		emit qq(if interface_is_usable $interface; then);
+		emit qq(if interface_is_usable $physical; then);
 	    }
 
 	    emit( "    ${base}_IS_USABLE=Yes" ,
@@ -822,6 +858,8 @@ sub handle_optional_interfaces() {
 		  "    ${base}_IS_USABLE=" ,
 		  'fi' );
 	}
+
+	1;
     }
 }
 
@@ -841,22 +879,18 @@ sub handle_stickiness( $ ) {
 
     if ( $havesticky ) {
 	fatal_error "There are SAME tcrules but no 'track' providers" unless @routemarked_providers;
-	
 
 	for my $providerref ( @routemarked_providers ) {
-	    my $interface = $providerref->{interface};
+	    my $interface = $providerref->{physical};
 	    my $base      = uc chain_base $interface;
 	    my $mark      = $providerref->{mark};
-	
+
 	    for ( grep /-j sticky/, @{$tcpreref->{rules}} ) {
 		my $stickyref = ensure_mangle_chain 'sticky';
 		my ( $rule1, $rule2 );
 		my $list = sprintf "sticky%03d" , $sticky++;
-		
+
 		for my $chainref ( $stickyref, $setstickyref ) {
-
-		    add_commands( $chainref, qq(if [ -n "\$${base}_IS_USABLE" ]; then) ), incr_cmd_level( $chainref ) if $providerref->{optional};
-
 		    if ( $chainref->{name} eq 'sticky' ) {
 			$rule1 = $_;
 			$rule1 =~ s/-j sticky/-m recent --name $list --update --seconds 300 -j MARK --set-mark $mark/;
@@ -866,18 +900,15 @@ sub handle_stickiness( $ ) {
 			$rule1 = $_;
 			$rule1 =~ s/-j sticky/-m mark --mark $mark\/$mask -m recent --name $list --set/;
 		    }
-		
-		    $rule1 =~ s/-A //;
+
+		    $rule1 =~ s/-A tcpre //;
 
 		    add_rule $chainref, $rule1;
 
 		    if ( $rule2 ) {
-			$rule2 =~ s/-A //;
+			$rule2 =~ s/-A tcpre //;
 			add_rule $chainref, $rule2;
 		    }
-
-		    decr_cmd_level( $chainref), add_commands( $chainref, "fi" ) if $providerref->{optional};
-		    
 		}
 	    }
 
@@ -887,8 +918,6 @@ sub handle_stickiness( $ ) {
 		my $stickoref = ensure_mangle_chain 'sticko';
 
 		for my $chainref ( $stickoref, $setstickoref ) {
-		    add_commands( $chainref, qq(if [ -n "\$${base}_IS_USABLE" ]; then) ), incr_cmd_level( $chainref ) if $providerref->{optional};
-
 		    if ( $chainref->{name} eq 'sticko' ) {
 			$rule1 = $_;
 			$rule1 =~ s/-j sticko/-m recent --name $list --rdest --update --seconds 300 -j MARK --set-mark $mark/;
@@ -898,17 +927,15 @@ sub handle_stickiness( $ ) {
 			$rule1 = $_;
 			$rule1 =~ s/-j sticko/-m mark --mark $mark -m recent --name $list --rdest --set/;
 		    }
-		
-		    $rule1 =~ s/-A //;
+
+		    $rule1 =~ s/-A tcout //;
 
 		    add_rule $chainref, $rule1;
 
 		    if ( $rule2 ) {
-			$rule2 =~ s/-A //;
+			$rule2 =~ s/-A tcout //;
 			add_rule $chainref, $rule2;
 		    }
-
-		    decr_cmd_level( $chainref), add_commands( $chainref, "fi" ) if $providerref->{optional};
 		}
 	    }
 	}
@@ -916,7 +943,7 @@ sub handle_stickiness( $ ) {
 
     if ( @routemarked_providers ) {
 	purge_jump $mangle_table->{PREROUTING}, $setstickyref unless @{$setstickyref->{rules}};
-	purge_jump $mangle_table->{OUTPUT},     $setstickoref unless @{$setstickoref->{rules}};	
+	purge_jump $mangle_table->{OUTPUT},     $setstickoref unless @{$setstickoref->{rules}};
     }
 }
 1;

Shorewall/Perl/Shorewall/Proxyarp.pm

@@ -35,30 +35,27 @@ our @EXPORT = qw(
 		  );
 
 our @EXPORT_OK = qw( initialize );
-our $VERSION = '4.3_7';
+our $VERSION = '4.4_4';
 
 our @proxyarp;
 
 our $family;
 
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function.
+# Rather than initializing globals in an INIT block or during declaration,
+# we initialize them in a function. This is done for two reasons:
+#
+#   1. Proper initialization depends on the address family which isn't
+#      known until the compiler has started.
+#
+#   2. The compiler can run multiple times in the same process so it has to be
+#      able to re-initialize its dependent modules' state.
 #
-
 sub initialize( $ ) {
     $family = shift;
     @proxyarp = ();
 }
 
-INIT {
-    initialize( F_IPV4 );
-}
-
 sub setup_one_proxy_arp( $$$$$ ) {
     my ( $address, $interface, $external, $haveroute, $persistent) = @_;
 
@@ -120,6 +117,8 @@ sub setup_proxy_arp() {
 		    $first_entry = 0;
 		}
 
+		$interface = get_physical $interface;
+
 		$set{$interface}  = 1;
 		$reset{$external} = 1 unless $set{$external};
 
@@ -146,10 +145,14 @@ sub setup_proxy_arp() {
 
 	    for my $interface ( @$interfaces ) {
 		my $value = get_interface_option $interface, 'proxyarp';
+		my $optional = interface_is_optional $interface;
+
+		$interface = get_physical $interface;
+
 		emit ( "if [ -f /proc/sys/net/ipv4/conf/$interface/proxy_arp ] ; then" ,
 		       "    echo $value > /proc/sys/net/ipv4/conf/$interface/proxy_arp" );
 		emit ( 'else' ,
-		       "    error_message \"WARNING: Unable to set/reset proxy ARP on $interface\"" ) unless interface_is_optional( $interface );
+		       "    error_message \"WARNING: Unable to set/reset proxy ARP on $interface\"" ) unless $optional;
 		emit   "fi\n";
 	    }
 	}
@@ -161,10 +164,14 @@ sub setup_proxy_arp() {
 
 	    for my $interface ( @$interfaces ) {
 		my $value = get_interface_option $interface, 'proxyndp';
+		my $optional = interface_is_optional $interface;
+
+		$interface = get_physical $interface;
+
 		emit ( "if [ -f /proc/sys/net/ipv6/conf/$interface/proxy_ndp ] ; then" ,
 		   "    echo $value > /proc/sys/net/ipv6/conf/$interface/proxy_ndp" );
 		emit ( 'else' ,
-		       "    error_message \"WARNING: Unable to set/reset Proxy NDP on $interface\"" ) unless interface_is_optional( $interface );
+		       "    error_message \"WARNING: Unable to set/reset Proxy NDP on $interface\"" ) unless $optional;
 		emit   "fi\n";
 	    }
 	}

Shorewall/Perl/Shorewall/Raw.pm

@@ -47,7 +47,7 @@ sub process_notrack_rule( $$$$$$ ) {
     $ports  = ''    if $ports  eq 'any' || $ports  eq 'all';
     $sports = ''    if $sports eq 'any' || $sports eq 'all';
 
-    ( my $zone, $source) = split /:/, $source, 2;  
+    ( my $zone, $source) = split /:/, $source, 2;
     my $zoneref  = find_zone $zone;
     my $chainref = ensure_raw_chain( notrack_chain $zone );
     my $restriction = $zone eq firewall_zone ? OUTPUT_RESTRICT : PREROUTE_RESTRICT;

Shorewall/Perl/Shorewall/Rules.pm

@@ -24,6 +24,7 @@
 #
 package Shorewall::Rules;
 require Exporter;
+
 use Shorewall::Config qw(:DEFAULT :internal);
 use Shorewall::IPAddrs;
 use Shorewall::Zones;
@@ -40,12 +41,12 @@ our @EXPORT = qw( process_tos
 		  add_common_rules
 		  setup_mac_lists
 		  process_rules
+		  process_routestopped
 		  generate_matrix
-		  setup_mss
 		  compile_stop_firewall
 		  );
 our @EXPORT_OK = qw( process_rule process_rule1 initialize );
-our $VERSION = '4.4_0';
+our $VERSION = '4.4_5';
 
 #
 # Set to one if we find a SECTION
@@ -64,14 +65,15 @@ my %rules_commands = ( COMMENT => 0,
 		       SECTION => 2 );
 
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function.
+# Rather than initializing globals in an INIT block or during declaration,
+# we initialize them in a function. This is done for two reasons:
+#
+#   1. Proper initialization depends on the address family which isn't
+#      known until the compiler has started.
+#
+#   2. The compiler can run multiple times in the same process so it has to be
+#      able to re-initialize its dependent modules' state.
 #
-
 sub initialize( $ ) {
     $family = shift;
     $sectioned = 0;
@@ -80,10 +82,6 @@ sub initialize( $ ) {
     @param_stack = ();
 }
 
-INIT {
-    initialize( F_IPV4 );
-}
-
 use constant { MAX_MACRO_NEST_LEVEL => 5 };
 
 sub process_tos() {
@@ -201,8 +199,8 @@ sub setup_ecn()
 	    for my $interface ( @interfaces ) {
 		my $chainref = ensure_chain 'mangle', ecn_chain( $interface );
 
-		add_jump $mangle_table->{POSTROUTING} , $chainref, 0, "-p tcp -o $interface ";
-		add_jump $mangle_table->{OUTPUT},       $chainref, 0, "-p tcp -o $interface ";
+		add_jump $mangle_table->{POSTROUTING} , $chainref, 0, "-p tcp " . match_dest_dev( $interface );
+		add_jump $mangle_table->{OUTPUT},       $chainref, 0, "-p tcp " . match_dest_dev( $interface );
 	    }
 
 	    for my $host ( @hosts ) {
@@ -324,7 +322,7 @@ sub process_routestopped() {
 
 	$seq++;
 
-	my $rule = do_proto( $proto, $ports, $sports, 1 );
+	my $rule = do_proto( $proto, $ports, $sports, 0 );
 
 	for my $host ( split /,/, $hosts ) {
 	    validate_host $host, 1;
@@ -333,18 +331,22 @@ sub process_routestopped() {
 	}
 
 	unless ( $options eq '-' ) {
+
 	    for my $option (split /,/, $options ) {
 		if ( $option eq 'routeback' ) {
 		    if ( $routeback ) {
 			warning_message "Duplicate 'routeback' option ignored";
 		    } else {
+			my $chainref = $filter_table->{FORWARD};
+
 			$routeback = 1;
 
 			for my $host ( split /,/, $hosts ) {
-			    my $source = match_source_net $host;
-			    my $dest   = match_dest_net   $host;
-
-			    emit "run_iptables -A FORWARD -i $interface -o $interface $source $dest -j ACCEPT";
+			    add_rule( $chainref , 
+				      match_source_dev( $interface ) . 
+				      match_dest_dev( $interface ) .
+				      match_source_net( $host ) .
+				      match_dest_net( $host ) );
 			    clearrule;
 			}
 		    }
@@ -378,24 +380,24 @@ sub process_routestopped() {
 	my $desti   = match_dest_dev $interface;
 	my $rule    = shift @rule;
 
-	add_rule $filter_table->{INPUT},  "$sourcei $source $rule -j ACCEPT";
-	add_rule $filter_table->{OUTPUT}, "$desti $dest $rule -j ACCEPT" unless $config{ADMINISABSENTMINDED};
+	add_rule $filter_table->{INPUT},  "$sourcei $source $rule -j ACCEPT", 1;
+	add_rule $filter_table->{OUTPUT}, "$desti $dest $rule -j ACCEPT", 1 unless $config{ADMINISABSENTMINDED};
 
 	my $matched = 0;
 
 	if ( $source{$host} ) {
-	    add_rule $filter_table->{FORWARD}, "$sourcei $source $rule -j ACCEPT";
+	    add_rule $filter_table->{FORWARD}, "$sourcei $source $rule -j ACCEPT", 1;
 	    $matched = 1;
 	}
 
 	if ( $dest{$host} ) {
-	    add_rule $filter_table->{FORWARD}, "$desti $dest $rule -j ACCEPT";
+	    add_rule $filter_table->{FORWARD}, "$desti $dest $rule -j ACCEPT", 1;
 	    $matched = 1;
 	}
 
 	if ( $notrack{$host} ) {
-	    add_rule $raw_table->{PREROUTING}, "$sourcei $source $rule -j NOTRACK";
-	    add_rule $raw_table->{OUTPUT},     "$desti $dest $rule -j NOTRACK";
+	    add_rule $raw_table->{PREROUTING}, "$sourcei $source $rule -j NOTRACK", 1;
+	    add_rule $raw_table->{OUTPUT},     "$desti $dest $rule -j NOTRACK", 1;
 	}
 
 	unless ( $matched ) {
@@ -404,7 +406,7 @@ sub process_routestopped() {
 		    my ( $interface1, $h1 , $seq1 ) = split /\|/, $host1;
 		    my $dest1 = match_dest_net $h1;
 		    my $desti1 = match_dest_dev $interface1;
-		    add_rule $filter_table->{FORWARD}, "$sourcei $desti1 $source $dest1 $rule -j ACCEPT";
+		    add_rule $filter_table->{FORWARD}, "$sourcei $desti1 $source $dest1 $rule -j ACCEPT", 1;
 		    clearrule;
 		}
 	    }
@@ -529,7 +531,7 @@ sub add_common_rules() {
 	    add_rule $rejectref, '-j REJECT --reject-with icmp-host-prohibited';
 	} else {
 	    add_rule $rejectref, '-p 58 -j REJECT --reject-with icmp6-addr-unreachable';
-	    add_rule $rejectref, '-j REJECT --reject-with icmp6-adm-prohibited'; 
+	    add_rule $rejectref, '-j REJECT --reject-with icmp6-adm-prohibited';
 	}
     } else {
 	add_rule $rejectref , '-j REJECT';
@@ -550,7 +552,11 @@ sub add_common_rules() {
 		add_rule $filter_table->{$chain} , "-p udp --dport $ports -j ACCEPT";
 	    }
 
-	    add_rule $filter_table->{forward_chain $interface} , "-p udp -o $interface --dport $ports -j ACCEPT" if get_interface_option( $interface, 'bridge' );
+	    add_rule( $filter_table->{forward_chain $interface} , 
+		      "-p udp " .
+		      match_dest_dev( $interface ) .
+		      "--dport $ports -j ACCEPT" )
+		if get_interface_option( $interface, 'bridge' );
 	}
     }
 
@@ -632,12 +638,12 @@ sub add_common_rules() {
 		my $variable = get_interface_gateway $interface;
 
 		if ( interface_is_optional $interface ) {
-		    add_commands( $chainref, 
+		    add_commands( $chainref,
 				  qq(if [ -n "\$${base}_IS_USABLE" -a -n "$variable" ]; then) ,
-				  qq(    echo -A $chainref->{name} -i $interface -s $variable -p udp -j ACCEPT >&3) ,
+				  qq(    echo -A $chainref->{name} ) . match_source_dev( $interface ) . qq(-s $variable -p udp -j ACCEPT >&3) ,
 				  qq(fi) );
 		} else {
-		    add_commands( $chainref, qq(echo -A $chainref->{name} -i $interface -s $variable -p udp -j ACCEPT >&3) );
+		    add_commands( $chainref, qq(echo -A $chainref->{name} ) . match_source_dev( $interface ) . qq(-s $variable -p udp -j ACCEPT >&3) );
 		}
 	    }
 	}
@@ -680,7 +686,7 @@ sub setup_mac_lists( $ ) {
 	    my $chainref = new_chain $table , mac_chain $interface;
 
 	    if ( $family == F_IPV4 ) {
-		add_rule $chainref , '-s 0.0.0.0 -d 255.255.255.255 -p udp --dport 67:68 -j RETURN' 
+		add_rule $chainref , '-s 0.0.0.0 -d 255.255.255.255 -p udp --dport 67:68 -j RETURN'
 		    if $table eq 'mangle'  && get_interface_option( $interface, 'dhcp');
 	    } else {
 		#
@@ -780,6 +786,9 @@ sub setup_mac_lists( $ ) {
 	    }
 	}
     } else {
+	#
+	# Phase II
+	#
 	for my $interface ( @maclist_interfaces ) {
 	    my $chainref = $chain_table{$table}{( $ttl ? macrecent_target $interface : mac_chain $interface )};
 	    my $chain    = $chainref->{name};
@@ -809,7 +818,7 @@ sub setup_mac_lists( $ ) {
 			} else {
 			    my $variable1 = get_interface_bcasts $bridge;
 
-			    add_commands( $chainref, 
+			    add_commands( $chainref,
 					  "    for address1 in $variable1; do" ,
 					  "        echo \"-A $chainref->{name} -s \$address -d \$address1 -j RETURN\" >&3",
 					  "    done" );
@@ -852,12 +861,13 @@ sub process_macro ( $$$$$$$$$$$$$$$ ) {
 
     while ( read_a_line ) {
 
-	my ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $morigdest, $mrate, $muser );
+	my ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $morigdest, $mrate, $muser, $mmark, $mconnlimit, $mtime);
 
 	if ( $format == 1 ) {
-	    ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $mrate, $muser, $morigdest ) = split_line1 1, 9, 'macro file', $macro_commands;
+	    ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $mrate, $muser ) = split_line1 1, 8, 'macro file', $macro_commands;
+	    ( $morigdest, $mmark, $mconnlimit, $mtime ) = qw/- - - -/;
 	} else {
-	    ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $morigdest, $mrate, $muser ) = split_line1 1, 9, 'macro file', $macro_commands;
+	    ( $mtarget, $msource, $mdest, $mproto, $mports, $msports, $morigdest, $mrate, $muser, $mmark, $mconnlimit, $mtime ) = split_line1 1, 12, 'macro file', $macro_commands;
 	}
 
 	if ( $mtarget eq 'COMMENT' ) {
@@ -871,8 +881,6 @@ sub process_macro ( $$$$$$$$$$$$$$$ ) {
 	    next;
 	}
 
-	fatal_error "Invalid macro file entry (too many columns)" if $morigdest ne '-' && $format == 1;
-
 	$mtarget = merge_levels $target, $mtarget;
 
 	if ( $mtarget =~ /^PARAM(:.*)?$/ ) {
@@ -892,7 +900,7 @@ sub process_macro ( $$$$$$$$$$$$$$$ ) {
 	    if ( $msource eq '-' ) {
 		$msource = $source || '';
 	    } elsif ( $msource =~ s/^DEST:?// ) {
-		$msource = merge_macro_source_dest $msource, $dest; 
+		$msource = merge_macro_source_dest $msource, $dest;
 	    } else {
 		$msource =~ s/^SOURCE:?//;
 		$msource = merge_macro_source_dest $msource, $source;
@@ -914,19 +922,19 @@ sub process_macro ( $$$$$$$$$$$$$$$ ) {
 	    $mdest = '';
 	}
 
-	process_rule1( 
-		      $mtarget, 
-		      $msource, 
-		      $mdest, 
-		      merge_macro_column( $mproto,    $proto ) , 
-		      merge_macro_column( $mports,    $ports ) ,
-		      merge_macro_column( $msports,   $sports ) ,
-		      merge_macro_column( $morigdest, $origdest ) , 
-		      merge_macro_column( $mrate,     $rate ) ,
-		      merge_macro_column( $muser,     $user ) ,
-		      $mark, 
-		      $connlimit,
-		      $time,
+	process_rule1(
+		      $mtarget,
+		      $msource,
+		      $mdest,
+		      merge_macro_column( $mproto,     $proto ) ,
+		      merge_macro_column( $mports,     $ports ) ,
+		      merge_macro_column( $msports,    $sports ) ,
+		      merge_macro_column( $morigdest,  $origdest ) ,
+		      merge_macro_column( $mrate,      $rate ) ,
+		      merge_macro_column( $muser,      $user ) ,
+		      merge_macro_column( $mmark,      $mark ) ,
+		      merge_macro_column( $mconnlimit, $connlimit) ,
+		      merge_macro_column( $mtime,      $time ),
 		      $wildcard
 		     );
 
@@ -941,7 +949,7 @@ sub process_macro ( $$$$$$$$$$$$$$$ ) {
 
 }
 #
-# Once a rule has been expanded via wildcards (source and/or dest zone == 'all'), it is processed by this function. If
+# Once a rule has been expanded via wildcards (source and/or dest zone eq 'all'), it is processed by this function. If
 # the target is a macro, the macro is expanded and this function is called recursively for each rule in the expansion.
 #
 sub process_rule1 ( $$$$$$$$$$$$$ ) {
@@ -952,10 +960,6 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
     my $actionchainref;
     my $optimize = $wildcard ? ( $basictarget =~ /!$/ ? 0 : $config{OPTIMIZE} ) : 0;
 
-    unless ( defined $param ) {
-	( $basictarget, $param ) = ( $1, $2 ) if $action =~ /^(\w+)[(](.*)[)]$/;
-    }
-
     $param = '' unless defined $param;
 
     #
@@ -963,6 +967,10 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
     #
     my $actiontype = $targets{$basictarget} || find_macro( $basictarget );
 
+    if ( $config{ MAPOLDACTIONS } ) {
+	( $basictarget, $actiontype , $param ) = map_old_actions( $basictarget ) unless $actiontype || $param;
+    }
+
     fatal_error "Unknown action ($action)" unless $actiontype;
 
     if ( $actiontype == MACRO ) {
@@ -999,7 +1007,7 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
 	return;
 
     } elsif ( $actiontype & NFQ ) {
-	require_capability( 'NFQUEUE_TARGET', 'NFQUEUE Rules', '' ); 
+	require_capability( 'NFQUEUE_TARGET', 'NFQUEUE Rules', '' );
 	my $paramval = $param eq '' ? 0 : numeric_value( $param );
 	fatal_error "Invalid value ($param) for NFQUEUE queue number" unless defined($paramval) && $paramval <= 65535;
 	$action = "NFQUEUE --queue-num $paramval";
@@ -1078,9 +1086,9 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
     if ( $actiontype & NATONLY ) {
 	unless ( $destzone eq '-' || $destzone eq '' ) {
 	    $destref = defined_zone( $destzone );
-	    
+
 	    if ( $destref ) {
-		warning_message "Destination zone ($destzone) ignored";
+		warning_message "The destination zone ($destzone) is ignored in $log_action rules";
 	    } else {
 		$dest = join ':', $destzone, $dest;
 		$destzone = '';
@@ -1120,7 +1128,10 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
 	    }
 	}
 
-	$chain    = "${sourcezone}2${destzone}";
+	$chain    = rules_chain( ${sourcezone}, ${destzone} );
+	#
+	# Ensure that the chain exists but don't mark it as referenced until after optimization is checked
+	#
 	$chainref = ensure_chain 'filter', $chain;
 	$policy   = $chainref->{policy};
 
@@ -1165,14 +1176,14 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
 
 	require_capability( 'NAT_ENABLED' , "$basictarget rules", '' );
 	#
-	# Isolate server port 
+	# Isolate server port
 	#
 	if ( $dest =~ /^(.*)(:(.+))$/ ) {
 	    #
 	    # Server IP and Port
 	    #
 	    $server = $1;      # May be empty
-	    $serverport = $3;  # Not Empty due to RE 
+	    $serverport = $3;  # Not Empty due to RE
 	    $origdstports = $ports;
 
 	    if ( $origdstports && $origdstports ne '-' && port_count( $origdstports ) == 1 ) {
@@ -1225,10 +1236,10 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
 		    $origdest = ALLIP;
 		}
 	    }
-	} else {
-	    fatal_error "A server must be specified in the DEST column in $action rules" if $server eq '';
-
-	    if ( $server =~ /^(.+)-(.+)$/ ) {
+	} else {            
+	    if ( $server eq '' ) {
+		fatal_error "A server and/or port must be specified in the DEST column in $action rules" unless $serverport;
+	    } elsif ( $server =~ /^(.+)-(.+)$/ ) {
 		validate_range( $1, $2 );
 	    } else {
 		my @servers = validate_address $server, 1;
@@ -1237,9 +1248,13 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
 
 	    if ( $action eq 'DNAT' ) {
 		$target = '-j DNAT ';
-		$serverport = ":$serverport" if $serverport;
-		for my $serv ( split /,/, $server ) {
-		    $target .= "--to-destination ${serv}${serverport} ";
+		if ( $server ) {
+		    $serverport = ":$serverport" if $serverport;
+		    for my $serv ( split /,/, $server ) {
+			$target .= "--to-destination ${serv}${serverport} ";
+		    }
+		} else {
+		    $target .= "--to-destination :$serverport ";
 		}
 	    }
 
@@ -1301,7 +1316,7 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
 	my $nonat_chain;
 
 	my $chn;
-	
+
 	if ( $sourceref->{type} == FIREWALL ) {
 	    $nonat_chain = $nat_table->{OUTPUT};
 	} else {
@@ -1317,7 +1332,7 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
 		    # Static NAT is defined on this interface
 		    #
 		    $chn = new_chain( 'nat', newnonatchain ) unless $chn;
-		    add_jump $chn, $nat_table->{$ichain}, 0, @interfaces > 1 ? "-i $_ " : '';
+		    add_jump $chn, $nat_table->{$ichain}, 0, @interfaces > 1 ? match_source_dev( $_ )  : '';
 		}
 	    }
 
@@ -1362,13 +1377,13 @@ sub process_rule1 ( $$$$$$$$$$$$$ ) {
 	#
 	if ( $chn && ${$nonat_chain->{rules}}[-1] eq "-A -j $tgt" ) {
 	    #
-	    # It was -- delete that rule 
+	    # It was -- delete that rule
 	    #
 	    pop @{$nonat_chain->{rules}};
 	    #
 	    # And move the rules from the nonat chain to the zone dnat chain
 	    #
-	    add_rule( $nonat_chain, "-j $tgt" ) unless move_rules ( $chn, $nonat_chain );
+	    move_rules ( $chn, $nonat_chain );
 	}
     }
 
@@ -1417,7 +1432,7 @@ sub process_rule ( ) {
 	process_comment;
 	return 1;
     }
-    
+
     if ( $target eq 'SECTION' ) {
 	#
 	# read_a_line has already verified that there are exactly two tokens on the line
@@ -1426,7 +1441,7 @@ sub process_rule ( ) {
 	fatal_error "Duplicate or out of order SECTION $source" if $sections{$source};
 	$sectioned = 1;
 	$sections{$source} = 1;
-	
+
 	if ( $source eq 'RELATED' ) {
 	    $sections{ESTABLISHED} = 1;
 	    finish_section 'ESTABLISHED';
@@ -1434,7 +1449,7 @@ sub process_rule ( ) {
 	    @sections{'ESTABLISHED','RELATED'} = ( 1, 1 );
 	    finish_section ( ( $section eq 'RELATED' ) ? 'RELATED' : 'ESTABLISHED,RELATED' );
 	}
-	
+
 	$section = $source;
 	return 1;
     }
@@ -1463,7 +1478,7 @@ sub process_rule ( ) {
     #
     # Handle Wildcards
     #
-    
+
     if ( $source =~ /^all[-+]/ ) {
 	if ( $source eq 'all+' ) {
 	    $source = 'all';
@@ -1510,7 +1525,7 @@ sub process_rule ( ) {
 	}
 
 	unshift @source, firewall_zone if $includesrcfw;
-    }	
+    }
 
     if ( $dest eq 'all' ) {
 	if ( $anydest ) {
@@ -1520,7 +1535,7 @@ sub process_rule ( ) {
 	}
 
 	unshift @dest, firewall_zone if $includedstfw;
-    }	
+    }
 
     fatal_error "Invalid or missing ACTION ($target)" unless defined $action;
 
@@ -1573,6 +1588,9 @@ sub process_rules() {
 # Add jumps from the builtin chains to the interface-chains that are used by this configuration
 #
 sub add_interface_jumps {
+    our %input_jump_added;
+    our %output_jump_added;
+    our %forward_jump_added;
     #
     # Add Nat jumps
     #
@@ -1593,10 +1611,10 @@ sub add_interface_jumps {
     # Add the jumps to the interface chains from filter FORWARD, INPUT, OUTPUT
     #
     for my $interface ( @_ ) {
-	add_jump( $filter_table->{FORWARD} , forward_chain $interface , 0, match_source_dev( $interface ) ) if use_forward_chain $interface;
-	add_jump( $filter_table->{INPUT}   , input_chain $interface ,   0, match_source_dev( $interface ) ) if use_input_chain $interface;
+	add_jump( $filter_table->{FORWARD} , forward_chain $interface , 0, match_source_dev( $interface ) ) unless $forward_jump_added{$interface} || ! use_forward_chain $interface;
+	add_jump( $filter_table->{INPUT}   , input_chain $interface ,   0, match_source_dev( $interface ) ) unless $input_jump_added{$interface}   || ! use_input_chain $interface;
 
-	if ( use_output_chain $interface ) {
+	unless ( $output_jump_added{$interface} || ! use_output_chain $interface ) {
 	    add_jump $filter_table->{OUTPUT} , output_chain $interface , 0, match_dest_dev( $interface ) unless get_interface_option( $interface, 'port' );
 	}
     }
@@ -1604,7 +1622,7 @@ sub add_interface_jumps {
     # Loopback
     #
     my $fw = firewall_zone;
-    my $chainref = $filter_table->{"${fw}2${fw}"};
+    my $chainref = $filter_table->{rules_chain( ${fw}, ${fw} )};
 
     add_rule $filter_table->{OUTPUT} , "-o lo -j " . ($chainref->{referenced} ? "$chainref->{name}" : 'ACCEPT' );
     add_rule $filter_table->{INPUT} , '-i lo -j ACCEPT';
@@ -1612,7 +1630,7 @@ sub add_interface_jumps {
 
 # Generate the rules matrix.
 #
-# Stealing a comment from the Burroughs B6700 MCP Operating System source, generate_matrix makes a sow's ear out of a silk purse.
+# Stealing a comment from the Burroughs B6700 MCP Operating System source, "generate_matrix makes a sow's ear out of a silk purse".
 #
 # The biggest disadvantage of the zone-policy-rule model used by Shorewall is that it doesn't scale well as the number of zones increases (Order N**2 where N = number of zones).
 # A major goal of the rewrite of the compiler in Perl was to restrict those scaling effects to this function and the rules that it generates.
@@ -1628,7 +1646,7 @@ sub generate_matrix() {
     #
     sub rules_target( $$ ) {
 	my ( $zone, $zone1 ) = @_;
-	my $chain = "${zone}2${zone1}";
+	my $chain = rules_chain( ${zone}, ${zone1} );
 	my $chainref = $filter_table->{$chain};
 
 	return $chain   if $chainref && $chainref->{referenced};
@@ -1663,18 +1681,28 @@ sub generate_matrix() {
     my $notrackref = $raw_table->{notrack_chain $fw};
     my @zones = non_firewall_zones;
     my $interface_jumps_added = 0;
+    our %input_jump_added   = ();
+    our %output_jump_added  = ();
+    our %forward_jump_added = ();
 
     #
     # Special processing for complex configurations
     #
     for my $zone ( @zones ) {
-	my $zoneref    = find_zone( $zone );
+	my $zoneref = find_zone( $zone );
 
 	next if @zones <= 2 && ! $zoneref->{options}{complex};
-
+	#
+	# Complex zone and we have more than one non-firewall zone -- create a zone forwarding chain
+	#
 	my $frwd_ref = new_standard_chain zone_forward_chain( $zone );
 
 	if ( $capabilities{POLICY_MATCH} ) {
+	    #
+	    # Because policy match only matches an 'in' or an 'out' policy (but not both), we have to place the
+	    # '--pol ipsec --dir in' rules at the front of the (interface) forwarding chains. Otherwise, decrypted packets
+	    # can match '--pol none --dir out' rules and send the packets down the wrong rules chain.
+	    #
 	    my $type       = $zoneref->{type};
 	    my $source_ref = ( $zoneref->{hosts}{ipsec} ) || {};
 
@@ -1684,6 +1712,7 @@ sub generate_matrix() {
 
 		if ( use_forward_chain( $interface ) ) {
 		    $sourcechainref = $filter_table->{forward_chain $interface};
+		    add_jump $filter_table->{FORWARD} , $sourcechainref, 0 , match_source_dev( $interface ) unless $forward_jump_added{$interface}++;
 		} else {
 		    $sourcechainref = $filter_table->{FORWARD};
 		    $interfacematch = match_source_dev $interface;
@@ -1750,7 +1779,7 @@ sub generate_matrix() {
 
 	    if ( $parenthasnat || $parenthasnotrack ) {
 		for my $zone1 ( all_zones ) {
-		    if ( $filter_table->{"${zone}2${zone1}"}->{policy} eq 'CONTINUE' ) {
+		    if ( $filter_table->{rules_chain( ${zone}, ${zone1} )}->{policy} eq 'CONTINUE' ) {
 			#
 			# This zone has a continue policy to another zone. We must
 			# send packets from this zone through the parent's DNAT/REDIRECT/NOTRACK chain.
@@ -1795,6 +1824,7 @@ sub generate_matrix() {
 
 			    if ( use_output_chain $interface ) {
 				$outputref = $filter_table->{output_chain $interface};
+				add_jump $filter_table->{OUTPUT}, $outputref, 0, match_dest_dev( $interface ) unless $output_jump_added{$interface}++;
 			    } else {
 				$outputref = $filter_table->{OUTPUT};
 				$interfacematch = match_dest_dev $interface;
@@ -1810,7 +1840,7 @@ sub generate_matrix() {
 
 			clearrule;
 
-			next if $hostref->{options}{destonly}; 
+			next if $hostref->{options}{destonly};
 
 			my $source = match_source_net $net;
 
@@ -1843,6 +1873,7 @@ sub generate_matrix() {
 
 			if ( use_input_chain $interface ) {
 			    $inputchainref = $filter_table->{input_chain $interface};
+			    add_jump $filter_table->{INPUT}, $inputchainref, 0, match_source_dev($interface) unless $input_jump_added{$interface}++;
 			} else {
 			    $inputchainref = $filter_table->{INPUT};
 			    $interfacematch = match_source_dev $interface;
@@ -1856,7 +1887,9 @@ sub generate_matrix() {
 			if ( $frwd_ref && $hostref->{ipsec} ne 'ipsec' ) {
 			    my $ref = source_exclusion( $exclusions, $frwd_ref );
 			    if ( use_forward_chain $interface ) {
-				add_jump $filter_table->{forward_chain $interface} , $ref, 0, join( '', $source, $ipsec_in_match );
+				my $forwardref = $filter_table->{forward_chain $interface};
+				add_jump $forwardref , $ref, 0, join( '', $source, $ipsec_in_match );
+				add_jump $filter_table->{FORWARD} , $forwardref, 0 , match_source_dev( $interface ) unless $forward_jump_added{$interface}++;
 			    } else {
 				add_jump $filter_table->{FORWARD} , $ref, 0, join( '', match_source_dev( $interface ) , $source, $ipsec_in_match );
 				move_rules ( $filter_table->{forward_chain $interface} , $frwd_ref );
@@ -1876,12 +1909,11 @@ sub generate_matrix() {
 	if ( $config{OPTIMIZE} > 0 ) {
 	    my @temp_zones;
 
-	  ZONE1:
 	    for my $zone1 ( @zones )  {
 		my $zone1ref = find_zone( $zone1 );
-		my $policy = $filter_table->{"${zone}2${zone1}"}->{policy};
+		my $policy = $filter_table->{rules_chain( ${zone}, ${zone1} )}->{policy};
 
-		next if $policy  eq 'NONE';
+		next if $policy eq 'NONE';
 
 		my $chain = rules_target $zone, $zone1;
 
@@ -1895,7 +1927,7 @@ sub generate_matrix() {
 		    next unless $zoneref->{bridge} eq $zone1ref->{bridge};
 		}
 
-		if ( $chain =~ /2all$/ ) {
+		if ( $chain =~ /(2all|-all)$/ ) {
 		    if ( $chain ne $last_chain ) {
 			$last_chain = $chain;
 			push @dest_zones, @temp_zones;
@@ -1926,12 +1958,10 @@ sub generate_matrix() {
 	# We now loop through the destination zones creating jumps to the rules chain for each source/dest combination.
 	# @dest_zones is the list of destination zones that we need to handle from this source zone
 	#
-      ZONE1:
 	for my $zone1 ( @dest_zones ) {
 	    my $zone1ref = find_zone( $zone1 );
-	    my $policy   = $filter_table->{"${zone}2${zone1}"}->{policy};
 
-	    next if $policy  eq 'NONE';
+	    next if $filter_table->{rules_chain( ${zone}, ${zone1} )}->{policy}  eq 'NONE';
 
 	    my $chain = rules_target $zone, $zone1;
 
@@ -1940,57 +1970,69 @@ sub generate_matrix() {
 	    my $num_ifaces = 0;
 
 	    if ( $zone eq $zone1 ) {
-		next ZONE1 if ( $num_ifaces = scalar( keys ( %{$zoneref->{interfaces}} ) ) ) < 2 && ! $zoneref->{options}{in_out}{routeback};
+		next if ( $num_ifaces = scalar( keys ( %{$zoneref->{interfaces}} ) ) ) < 2 && ! $zoneref->{options}{in_out}{routeback};
 	    }
 
 	    if ( $zone1ref->{type} == BPORT ) {
-		next ZONE1 unless $zoneref->{bridge} eq $zone1ref->{bridge};
+		next unless $zoneref->{bridge} eq $zone1ref->{bridge};
 	    }
 
-	    my $chainref    = $filter_table->{$chain};
-
-	    my $dest_hosts_ref = $zone1ref->{hosts};
+	    my $chainref = $filter_table->{$chain}; #Will be null if $chain is a Netfilter Built-in target like ACCEPT
 
 	    if ( $frwd_ref ) {
-		for my $typeref ( values %$dest_hosts_ref ) {
+		#
+		# Simple case -- the source zone has it's own forwarding chain
+		#
+		for my $typeref ( values %{$zone1ref->{hosts}} ) {
 		    for my $interface ( sort { interface_number( $a ) <=> interface_number( $b ) } keys %$typeref ) {
-			my $arrayref = $typeref->{$interface};
-			for my $hostref ( @$arrayref ) {
+			for my $hostref ( @{$typeref->{$interface}} ) {
 			    next if $hostref->{options}{sourceonly};
 			    if ( $zone ne $zone1 || $num_ifaces > 1 || $hostref->{options}{routeback} ) {
 				my $ipsec_out_match = match_ipsec_out $zone1 , $hostref;
+				my $dest_exclusion = dest_exclusion( $hostref->{exclusions}, $chain);
 				for my $net ( @{$hostref->{hosts}} ) {
-				    add_jump $frwd_ref, dest_exclusion( $hostref->{exclusions}, $chain), 0, join( '', match_dest_dev( $interface) , match_dest_net($net), $ipsec_out_match );
+				    add_jump $frwd_ref, $dest_exclusion, 0, join( '', match_dest_dev( $interface) , match_dest_net($net), $ipsec_out_match );
 				}
 			    }
 			}
 		    }
 		}
 	    } else {
+		#
+		# More compilcated case. If the interface is associated with a single simple zone, we try to combine the interface's forwarding chain with the rules chain
+		#
 		for my $typeref ( values %$source_hosts_ref ) {
 		    for my $interface ( keys %$typeref ) {
-			my $arrayref = $typeref->{$interface};
 			my $chain3ref;
 			my $match_source_dev = '';
+			my $forwardchainref = $filter_table->{forward_chain $interface};
 
-			if ( use_forward_chain $interface ) {
-			    $chain3ref = $filter_table->{forward_chain $interface};
+			if ( use_forward_chain $interface || ( @{$forwardchainref->{rules} } && ! $chainref ) ) {
+			    #
+			    # Either we must use the interface's forwarding chain or that chain has rules and we have nowhere to move them
+			    #
+			    $chain3ref = $forwardchainref;
+			    add_jump $filter_table->{FORWARD} , $chain3ref, 0 , match_source_dev( $interface ) unless $forward_jump_added{$interface}++;
 			} else {
+			    #
+			    # Don't use the interface's forward chain -- move any rules in that chain to this rules chain
+			    #
 			    $chain3ref  = $filter_table->{FORWARD};
 			    $match_source_dev = match_source_dev $interface;
-			    move_rules $filter_table->{forward_chain $interface}, $chainref;
+			    move_rules $forwardchainref, $chainref;
 			}
 
-			for my $hostref ( @$arrayref ) {
+			for my $hostref ( @{$typeref->{$interface}} ) {
 			    next if $hostref->{options}{destonly};
 			    my $excl3ref = source_exclusion( $hostref->{exclusions}, $chain3ref );
 			    for my $net ( @{$hostref->{hosts}} ) {
-				for my $type1ref ( values %$dest_hosts_ref ) {
+				for my $type1ref ( values %{$zone1ref->{hosts}} ) {
 				    for my $interface1 ( keys %$type1ref ) {
 					my $array1ref = $type1ref->{$interface1};
 					for my $host1ref ( @$array1ref ) {
 					    next if $host1ref->{options}{sourceonly};
 					    my $ipsec_out_match = match_ipsec_out $zone1 , $host1ref;
+					    my $dest_exclusion  = dest_exclusion( $host1ref->{exclusions}, $chain );
 					    for my $net1 ( @{$host1ref->{hosts}} ) {
 						unless ( $interface eq $interface1 && $net eq $net1 && ! $host1ref->{options}{routeback} ) {
 						    #
@@ -1998,13 +2040,13 @@ sub generate_matrix() {
 						    #
 						    add_jump(
 							     $excl3ref ,
-							     dest_exclusion( $host1ref->{exclusions}, $chain ),
+							     $dest_exclusion,
 							     0,
-							     join( '', 
-								   $match_source_dev, 
-								   match_dest_dev($interface1), 
-								   match_source_net($net), 
-								   match_dest_net($net1), 
+							     join( '',
+								   $match_source_dev,
+								   match_dest_dev($interface1),
+								   match_source_net($net),
+								   match_dest_net($net1),
 								   $ipsec_out_match )
 							    );
 						}
@@ -2017,13 +2059,13 @@ sub generate_matrix() {
 		    }
 		}
 	    }
-	    #
-	    #                                      E N D   F O R W A R D I N G
-	    #
-	    # Now add an unconditional jump to the last unique policy-only chain determined above, if any
-	    #
-	    add_jump $frwd_ref , $last_chain, 1 if $last_chain;
 	}
+	#
+	#                                      E N D   F O R W A R D I N G
+	#
+	# Now add an unconditional jump to the last unique policy-only chain determined above, if any
+	#
+	add_jump $frwd_ref , $last_chain, 1 if $frwd_ref && $last_chain;
     }
 
     add_interface_jumps @interfaces unless $interface_jumps_added;
@@ -2088,15 +2130,17 @@ sub setup_mss( ) {
 	if ( $capabilities{POLICY_MATCH} ) {
 	    $in_match  = '-m policy --pol none --dir in ';
 	    $out_match = '-m policy --pol none --dir out ';
-	} 
+	}
 
 	for ( @$interfaces ) {
 	    my $mss      = get_interface_option( $_, 'mss' );
-	    my $mssmatch = $capabilities{TCPMSS_MATCH} ? "-m tcpmss --mss $mss: " : ''; 
-	    add_rule $chainref, "-o $_ -p tcp --tcp-flags SYN,RST SYN ${mssmatch}${out_match}-j TCPMSS --set-mss $mss";
-	    add_rule $chainref, "-o $_ -j RETURN" if $clampmss;
-	    add_rule $chainref, "-i $_ -p tcp --tcp-flags SYN,RST SYN ${mssmatch}${in_match}-j TCPMSS --set-mss $mss";
-	    add_rule $chainref, "-i $_ -j RETURN" if $clampmss;
+	    my $mssmatch = $capabilities{TCPMSS_MATCH} ? "-m tcpmss --mss $mss: " : '';
+	    my $source   = match_source_dev $_;
+	    my $dest     = match_dest_dev $_;
+	    add_rule $chainref, "${dest}-p tcp --tcp-flags SYN,RST SYN ${mssmatch}${out_match}-j TCPMSS --set-mss $mss";
+	    add_rule $chainref, "${dest}-j RETURN" if $clampmss;
+	    add_rule $chainref, "${source}-p tcp --tcp-flags SYN,RST SYN ${mssmatch}${in_match}-j TCPMSS --set-mss $mss";
+	    add_rule $chainref, "${source}-j RETURN" if $clampmss;
 	}
     }
 
@@ -2226,7 +2270,7 @@ EOF
 	  );
 
     my @chains = $config{ADMINISABSENTMINDED} ? qw/INPUT FORWARD/ : qw/INPUT OUTPUT FORWARD/;
-    
+
     add_rule $filter_table->{$_}, '-m state --state ESTABLISHED,RELATED -j ACCEPT' for @chains;
 
     if ( $family == F_IPV6 ) {
@@ -2253,12 +2297,12 @@ EOF
 	my $ports = $family == F_IPV4 ? '67:68' : '546:547';
 
 	for my $interface ( @$interfaces ) {
-	    add_rule $input,  "-p udp -i $interface --dport $ports -j ACCEPT";
-	    add_rule $output, "-p udp -o $interface --dport $ports -j ACCEPT" unless $config{ADMINISABSENTMINDED};
+	    add_rule $input,  "-p udp " . match_source_dev( $interface ) . "--dport $ports -j ACCEPT";
+	    add_rule $output, "-p udp " . match_dest_dev( $interface )   . "--dport $ports -j ACCEPT" unless $config{ADMINISABSENTMINDED};
 	    #
 	    # This might be a bridge
 	    #
-	    add_rule $forward, "-p udp -i $interface -o $interface --dport $ports -j ACCEPT";
+	    add_rule $forward, "-p udp " . match_source_dev( $interface ) . match_dest_dev( $interface ) . "--dport $ports -j ACCEPT";
 	}
     }
 
@@ -2277,8 +2321,8 @@ EOF
 	}
     } else {
 	for my $interface ( all_bridges ) {
-	    emit "do_iptables -A FORWARD -p 58 -i $interface -o $interface -j ACCEPT";
-	}	    
+	    emit "do_iptables -A FORWARD -p 58 " . match_source_dev( $interface ) . match_dest_dev( $interface ) . "-j ACCEPT";
+	}
 
 	if ( $config{IP_FORWARDING} eq 'on' ) {
 	    emit( 'echo 1 > /proc/sys/net/ipv6/conf/all/forwarding',
@@ -2295,7 +2339,7 @@ EOF
     emit '
     run_stopped_exit';
 
-    my @ipsets = all_ipsets; 
+    my @ipsets = all_ipsets;
 
     if ( @ipsets ) {
 	emit <<'EOF';
@@ -2310,8 +2354,8 @@ EOF
     fi
 EOF
     }
-    
-    emit ' 
+
+    emit '
     set_state "Stopped"
 
     logger -p kern.info "$PRODUCT Stopped"

Shorewall/Perl/Shorewall/Tc.pm

@@ -40,7 +40,7 @@ use strict;
 our @ISA = qw(Exporter);
 our @EXPORT = qw( setup_tc );
 our @EXPORT_OK = qw( process_tc_rule initialize );
-our $VERSION = '4.3_12';
+our $VERSION = '4.4_5';
 
 our %tcs = ( T => { chain  => 'tcpost',
 		    connmark => 0,
@@ -153,7 +153,7 @@ our @deferred_rules;
 #
 # TCDevices Table
 #
-# %tcdevices { <interface> -> {in_bandwidth  => <value> ,
+# %tcdevices { <interface> => {in_bandwidth  => <value> ,
 #                              out_bandwidth => <value> ,
 #                              number        => <number>,
 #                              classify      => 0|1
@@ -163,6 +163,8 @@ our @deferred_rules;
 #                              nextclass     => <number>
 #                              occurs        => Has one or more occurring classes
 #                              qdisc         => htb|hfsc
+#                              guarantee     => <total RATE of classes seen so far>
+#                              name          => <interface>
 #                                               }
 #
 our @tcdevices;
@@ -186,6 +188,7 @@ our $sticky;
 #              occurs    => <number> # 0 means that this is a class generated by another class with occurs > 1
 #              parent    => <class number>
 #              leaf      => 0|1
+#              guarantee => <sum of rates of sub-classes>
 #              options   => { tos  => [ <value1> , <value2> , ... ];
 #                             tcp_ack => 1 ,
 #                             ...
@@ -202,14 +205,15 @@ our %restrictions = ( tcpre      => PREROUTE_RESTRICT ,
 our $family;
 
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function.
+# Rather than initializing globals in an INIT block or during declaration,
+# we initialize them in a function. This is done for two reasons:
+#
+#   1. Proper initialization depends on the address family which isn't
+#      known until the compiler has started.
+#
+#   2. The compiler can run multiple times in the same process so it has to be
+#      able to re-initialize its dependent modules' state.
 #
-
 sub initialize( $ ) {
     $family   = shift;
     %classids = ();
@@ -223,10 +227,6 @@ sub initialize( $ ) {
     $sticky = 0;
 }
 
-INIT {
-    initialize( F_IPV4 );
-}
-
 sub process_tc_rule( ) {
     my ( $originalmark, $source, $dest, $proto, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper ) = split_line1 2, 12, 'tcrules file';
 
@@ -343,7 +343,7 @@ sub process_tc_rule( ) {
 				fatal_error "Invalid Mask ($m2)" unless defined $val && $val <= 0xffffffff;
 				$mask2 = $m2;
 			    }
-				
+
 			    if ( defined $s ) {
 				$val = numeric_value ($s);
 				fatal_error "Invalid Shift Bits ($s)" unless defined $val && $val < 128;
@@ -352,7 +352,7 @@ sub process_tc_rule( ) {
 			} else {
 			    fatal_error "Invalid MARK/CLASSIFY ($cmd)" unless $cmd eq 'IPMARK';
 			}
-			    
+
 			$target = "IPMARK --addr $srcdst --and-mask $mask1 --or-mask $mask2 --shift $shift";
 		    }
 
@@ -388,12 +388,12 @@ sub process_tc_rule( ) {
 
     if ( ( my $result = expand_rule( ensure_chain( 'mangle' , $chain ) ,
 				     $restrictions{$chain} ,
-				     do_proto( $proto, $ports, $sports) . 
-				     do_user( $user ) . 
-				     do_test( $testval, $mask ) . 
-				     do_length( $length ) . 
-				     do_tos( $tos ) . 
-				     do_connbytes( $connbytes ) . 
+				     do_proto( $proto, $ports, $sports) .
+				     do_user( $user ) .
+				     do_test( $testval, $mask ) .
+				     do_length( $length ) .
+				     do_tos( $tos ) .
+				     do_connbytes( $connbytes ) .
 				     do_helper( $helper ),
 				     $source ,
 				     $dest ,
@@ -509,7 +509,7 @@ sub validate_tc_device( ) {
     if ( @redirected ) {
 	fatal_error "IFB devices may not have IN-BANDWIDTH" if $inband ne '-' && $inband;
 	$classify = 1;
-    }	
+    }
 
     for my $rdevice ( @redirected ) {
 	fatal_error "Invalid device name ($rdevice)" if $rdevice =~ /[:+]/;
@@ -529,6 +529,9 @@ sub validate_tc_device( ) {
 			    default       => 0,
 			    nextclass     => 2,
 			    qdisc         => $qdisc,
+			    guarantee     => 0,
+			    name          => $device,
+			    physical      => physical_name $device
 			  } ,
 
     push @tcdevices, $device;
@@ -538,8 +541,8 @@ sub validate_tc_device( ) {
     progress_message "  Tcdevice \"$currentline\" $done.";
 }
 
-sub convert_rate( $$$ ) {
-    my ($full, $rate, $column) = @_;
+sub convert_rate( $$$$ ) {
+    my ($full, $rate, $column, $max) = @_;
 
     if ( $rate =~ /\bfull\b/ ) {
 	$rate =~ s/\bfull\b/$full/g;
@@ -553,14 +556,14 @@ sub convert_rate( $$$ ) {
     }
 
     fatal_error "$column may not be zero" unless $rate;
-    fatal_error "$column ($_[1]) exceeds OUT-BANDWIDTH" if $rate > $full;
+    fatal_error "$column ($_[1]) exceeds $max (${full}kbit)" if $rate > $full;
 
     $rate;
 }
 
 sub convert_delay( $ ) {
     my $delay = shift;
-    
+
     return 0 unless $delay;
     return $1 if $delay =~ /^(\d+)(ms)?$/;
     fatal_error "Invalid Delay ($delay)";
@@ -599,6 +602,7 @@ sub validate_tc_class( ) {
     my $device = $devclass;
     my $occurs = 1;
     my $parentclass = 1;
+    my $parentref;
 
     if ( $devclass =~ /:/ ) {
 	( $device, my ($number, $subnumber, $rest ) )  = split /:/, $device, 4;
@@ -618,7 +622,7 @@ sub validate_tc_class( ) {
 		fatal_error "Invalid interface/class number ($devclass)" unless defined $classnumber && $classnumber;
 		$parentclass = $classnumber;
 		$classnumber = hex_value $subnumber;
-	    } 
+	    }
 
 	    fatal_error "Invalid interface/class number ($devclass)" unless defined $classnumber && $classnumber;
 	    fatal_error "Duplicate interface/class number ($devclass)" if defined $devnums[ $classnumber ];
@@ -630,7 +634,11 @@ sub validate_tc_class( ) {
 	fatal_error "Missing class NUMBER" if $devref->{classify};
     }
 
-    my $full  = rate_to_kbit $devref->{out_bandwidth};
+    my $full    = rate_to_kbit $devref->{out_bandwidth};
+    my $ratemax = $full;
+    my $ceilmax = $full;
+    my $ratename = 'OUT-BANDWIDTH';
+    my $ceilname = 'OUT-BANDWIDTH';
 
     my $tcref = $tcclasses{$device};
 
@@ -640,15 +648,15 @@ sub validate_tc_class( ) {
 	if ( $devref->{classify} ) {
 	    warning_message "INTERFACE $device has the 'classify' option - MARK value ($mark) ignored";
 	} else {
-	    fatal_error "Invalid Mark ($mark)" unless $mark =~ /^([0-9]+|0x[0-9a-fA-F]+)$/ && numeric_value( $mark ) <= 0xff;
-
 	    $markval = numeric_value( $mark );
 	    fatal_error "Invalid MARK ($markval)" unless defined $markval;
 
+	    fatal_error "Invalid Mark ($mark)" unless $markval <= ( $config{WIDE_TC_MARKS} ? 0x3fff : 0xff );
+
 	    if ( $classnumber ) {
 		fatal_error "Duplicate Class NUMBER ($classnumber)" if $tcref->{$classnumber};
 	    } else {
-		$classnumber = $config{WIDE_TC_MARKS} ? $tcref->{nextclass}++ : hex_value( $devnum . $markval );
+		$classnumber = $config{WIDE_TC_MARKS} ? $devref->{nextclass}++ : hex_value( $devnum . $markval );
 		fatal_error "Duplicate MARK ($mark)" if $tcref->{$classnumber};
 	    }
 	}
@@ -660,39 +668,53 @@ sub validate_tc_class( ) {
 	#
 	# Nested Class
 	#
-	my $parentref = $tcref->{$parentclass};
+	$parentref = $tcref->{$parentclass};
 	fatal_error "Unknown Parent class ($parentclass)" unless $parentref && $parentref->{occurs} == 1;
 	fatal_error "The parent class ($parentclass) specifies UMAX and/or DMAX; it cannot serve as a parent" if $parentref->{dmax};
 	$parentref->{leaf} = 0;
+	$ratemax  = $parentref->{rate};
+	$ratename = q(the parent class's RATE);
+	$ceilmax = $parentref->{ceiling};
+	$ceilname = q(the parent class's CEIL);
     }
 
     my ( $umax, $dmax ) = ( '', '' );
 
     if ( $devref->{qdisc} eq 'hfsc' ) {
 	( my $trate , $dmax, $umax , my $rest ) = split ':', $rate , 4;
-	
+
 	fatal_error "Invalid RATE ($rate)" if defined $rest;
 
-	$rate = convert_rate ( $full, $trate, 'RATE' );
+	$rate = convert_rate ( $ratemax, $trate, 'RATE', $ratename );
 	$dmax = convert_delay( $dmax );
 	$umax = convert_size( $umax );
-	fatal_error "DMAX must be specified when UMAX is specified" if $umax && ! $dmax; 
+	fatal_error "DMAX must be specified when UMAX is specified" if $umax && ! $dmax;
     } else {
-	$rate = convert_rate ( $full, $rate, 'RATE' );
+	$rate = convert_rate ( $ratemax, $rate, 'RATE' , $ratename );
     }
 
-    $tcref->{$classnumber} = { tos      => [] ,
-			       rate     => $rate ,
-			       umax     => $umax ,
-			       dmax     => $dmax ,
-			       ceiling  => convert_rate( $full, $ceil, 'CEIL' ) ,
-			       priority => $prio eq '-' ? 1 : $prio ,
-			       mark     => $markval ,
-			       flow     => '' ,
-			       pfifo    => 0,
-			       occurs   => 1,
-			       parent   => $parentclass,
-			       leaf     => 1,
+    if ( $parentref ) {
+	warning_message "Total RATE of sub classes ($parentref->{guarantee}kbits) exceeds RATE of parent class ($parentref->{rate}kbits)" if ( $parentref->{guarantee} += $rate ) > $parentref->{rate};
+    } else {
+	warning_message "Total RATE of classes ($devref->{guarantee}kbits) exceeds OUT-BANDWIDTH (${full}kbits)" if ( $devref->{guarantee} += $rate ) > $full;
+    }
+
+    fatal_error "Invalid PRIO ($prio)" unless defined numeric_value $prio;
+
+    $tcref->{$classnumber} = { tos       => [] ,
+			       rate      => $rate ,
+			       umax      => $umax ,
+			       dmax      => $dmax ,
+			       ceiling   => convert_rate( $ceilmax, $ceil, 'CEIL' , $ceilname ) ,
+			       priority  => $prio eq '-' ? 1 : $prio ,
+			       mark      => $markval ,
+			       flow      => '' ,
+			       pfifo     => 0,
+			       occurs    => 1,
+			       parent    => $parentclass,
+			       leaf      => 1,
+			       guarantee => 0,
+			       limit     => 127,
 			     };
 
     $tcref = $tcref->{$classnumber};
@@ -737,10 +759,14 @@ sub validate_tc_class( ) {
 		fatal_error q(Duplicate 'occurs')                                   if $tcref->{occurs} > 1;
 		fatal_error q(The 'occurs' option is not valid with 'default')      if $devref->{default} == $classnumber;
 		fatal_error q(The 'occurs' option is not valid with 'tos')          if @{$tcref->{tos}};
-		warning_message "MARK ($mark) is ignored on an occurring class"     if $mark ne '-'; 
+		warning_message "MARK ($mark) is ignored on an occurring class"     if $mark ne '-';
 
 		$tcref->{occurs} = $occurs;
 		$devref->{occurs} = 1;
+	    } elsif ( $option =~ /^limit=(\d+)$/ ) {
+		warning_message "limit ignored with pfifo queuing" if $tcref->{pfifo};
+		fatal_error "Invalid limit ($1)" if $1 < 3 || $1 > 128;
+		$tcref->{limit} = $1;
 	    } else {
 		fatal_error "Unknown option ($option)";
 	    }
@@ -749,7 +775,7 @@ sub validate_tc_class( ) {
 
     unless ( $devref->{classify} || $occurs > 1 ) {
 	fatal_error "Missing MARK" if $mark eq '-';
-	warning_message "Class NUMBER ignored -- INTERFACE $device does not have the 'classify' option"	if $devclass =~ /:/; 
+	warning_message "Class NUMBER ignored -- INTERFACE $device does not have the 'classify' option"	if $devclass =~ /:/;
     }
 
     $tcref->{flow}  = $devref->{flow}  unless $tcref->{flow};
@@ -769,6 +795,7 @@ sub validate_tc_class( ) {
 					       pfifo    => $tcref->{pfifo},
 					       occurs   => 0,
 					       parent   => $parentclass,
+					       limit    => $tcref->{limit},
 					     };
 	push @tcclasses, "$device:$classnumber";
     };
@@ -783,7 +810,7 @@ my %validlengths = ( 32 => '0xffe0', 64 => '0xffc0', 128 => '0xff80', 256 => '0x
 #
 sub process_tc_filter( ) {
     my ( $devclass, $source, $dest , $proto, $portlist , $sportlist, $tos, $length ) = split_line 2, 8, 'tcfilters file';
-    
+
     my ($device, $class, $rest ) = split /:/, $devclass, 3;
 
     fatal_error "Invalid INTERFACE:CLASS ($devclass)" if defined $rest || ! ($device && $class );
@@ -805,7 +832,7 @@ sub process_tc_filter( ) {
     fatal_error "Unknown CLASS ($devclass)"                  unless $tcref && $tcref->{occurs};
     fatal_error "Filters may not specify an occurring CLASS" if $tcref->{occurs} > 1;
 
-    my $rule = "filter add dev $device protocol ip parent $devnum:0 prio 10 u32";
+    my $rule = "filter add dev $devref->{physical} protocol ip parent $devnum:0 prio 10 u32";
 
     if ( $source ne '-' ) {
 	my ( $net , $mask ) = decompose_net( $source );
@@ -834,13 +861,13 @@ sub process_tc_filter( ) {
 
 	$rule .= "\\\n  match ip tos $tosval $mask";
     }
-	
+
     if ( $length ne '-' ) {
 	my $len = numeric_value( $length ) || 0;
 	my $mask = $validlengths{$len};
 	fatal_error "Invalid LENGTH ($length)" unless $mask;
 	$rule .="\\\n   match u16 0x0000 $mask at 2";
-    }      
+    }
 
     my $protonumber = 0;
 
@@ -876,7 +903,7 @@ sub process_tc_filter( ) {
 	    $lasttnum = $tnum;
 	    $lastrule = $rule;
 
-	    emit( "\nrun_tc filter add dev $device parent $devnum:0 protocol ip prio 10 handle $tnum: u32 divisor 1" );
+	    emit( "\nrun_tc filter add dev $devref->{physical} parent $devnum:0 protocol ip prio 10 handle $tnum: u32 divisor 1" );
 	}
 	#
 	# And link to it using the current contents of $rule
@@ -886,10 +913,10 @@ sub process_tc_filter( ) {
 	#
 	# The rule to match the port(s) will be inserted into the new table
 	#
-	$rule     = "filter add dev $device protocol ip parent $devnum:0 prio 10 u32 ht $tnum:0";
+	$rule     = "filter add dev $devref->{physical} protocol ip parent $devnum:0 prio 10 u32 ht $tnum:0";
 
 	if ( $portlist eq '-' ) {
-	    fatal_error "Only TCP, UDP and SCTP may specify SOURCE PORT" 
+	    fatal_error "Only TCP, UDP and SCTP may specify SOURCE PORT"
 		unless $protonumber == TCP || $protonumber == UDP || $protonumber == SCTP;
 
 	    for my $sportrange ( split_list $sportlist , 'port list' ) {
@@ -913,7 +940,7 @@ sub process_tc_filter( ) {
 		}
 	    }
 	} else {
-	    fatal_error "Only TCP, UDP, SCTP and ICMP may specify DEST PORT" 
+	    fatal_error "Only TCP, UDP, SCTP and ICMP may specify DEST PORT"
 		unless $protonumber == TCP || $protonumber == UDP || $protonumber == SCTP || $protonumber == ICMP;
 
 	    for my $portrange ( split_list $portlist, 'port list' ) {
@@ -934,7 +961,7 @@ sub process_tc_filter( ) {
 			my ( $port, $mask ) = ( shift @portlist, shift @portlist );
 
 			my $rule1;
-			
+
 			if ( $protonumber == TCP ) {
 			    $rule1 = join( ' ', 'match tcp dst', hex_value( $port ), "0x$mask" );
 			} elsif ( $protonumber == UDP ) {
@@ -970,9 +997,9 @@ sub process_tc_filter( ) {
 					  "   flowid $devref->{number}:$class" );
 				}
 			    }
-			}   
+			}
 		    }
-		}    
+		}
 	    }
 	}
     }
@@ -987,7 +1014,7 @@ sub process_tc_filter( ) {
 
     emit '';
 
-}   
+}
 
 sub setup_traffic_shaping() {
     our $lastrule = '';
@@ -1013,12 +1040,15 @@ sub setup_traffic_shaping() {
     }
 
     for my $device ( @tcdevices ) {
-	my $dev     = chain_base( $device );
 	my $devref  = $tcdevices{$device};
 	my $defmark = in_hexp ( $devref->{default} || 0 );
 	my $devnum  = in_hexp $devref->{number};
 	my $r2q     = int calculate_r2q $devref->{out_bandwidth};
 
+	$device = physical_name $device;
+
+	my $dev = chain_base( $device );
+
 	emit "if interface_is_up $device; then";
 
 	push_indent;
@@ -1101,12 +1131,14 @@ sub setup_traffic_shaping() {
 	my $classid  = join( ':', in_hexp $devicenumber, $classnum);
 	my $rate     = "$tcref->{rate}kbit";
 	my $quantum  = calculate_quantum $rate, calculate_r2q( $devref->{out_bandwidth} );
+
+	$classids{$classid}=$device;
+	$device = physical_name $device;
+
 	my $dev      = chain_base $device;
 	my $priority = $tcref->{priority} << 8;
 	my $parent   = in_hexp $tcref->{parent};
 
-	$classids{$classid}=$device;
-
 	if ( $lastdevice ne $device ) {
 	    if ( $lastdevice ) {
 		pop_indent;
@@ -1119,7 +1151,7 @@ sub setup_traffic_shaping() {
 	}
 
 	emit ( "[ \$${dev}_mtu -gt $quantum ] && quantum=\$${dev}_mtu || quantum=$quantum" );
-	
+
 	if ( $devref->{qdisc} eq 'htb' ) {
 	    emit ( "run_tc class add dev $device parent $devref->{number}:$parent classid $classid htb rate $rate ceil $tcref->{ceiling}kbit prio $tcref->{priority} \$${dev}_mtu1 quantum \$quantum" );
 	} else {
@@ -1132,8 +1164,8 @@ sub setup_traffic_shaping() {
 		emit ( "run_tc class add dev $device parent $devref->{number}:$parent classid $classid hfsc sc rate $rate ul rate $tcref->{ceiling}kbit" );
 	    }
 	}
-	    
-	emit( "run_tc qdisc add dev $device parent $classid handle ${classnum}: sfq quantum \$quantum limit 127 perturb 10" ) if $tcref->{leaf} && ! $tcref->{pfifo};
+
+	emit( "run_tc qdisc add dev $device parent $classid handle ${classnum}: sfq quantum \$quantum limit $tcref->{limit} perturb 10" ) if $tcref->{leaf} && ! $tcref->{pfifo};
 	#
 	# add filters
 	#
@@ -1194,7 +1226,7 @@ sub setup_tc() {
 	    $mark_part = $config{HIGH_ROUTE_MARKS} ? $config{WIDE_TC_MARKS} ? '-m mark --mark 0/0xFF0000' : '-m mark --mark 0/0xFF00' : '-m mark --mark 0/0xFF';
 
 	    for my $interface ( @routemarked_interfaces ) {
-		add_rule $mangle_table->{PREROUTING} , "-i $interface -j tcpre";
+		add_rule $mangle_table->{PREROUTING} , match_source_dev( $interface ) . "-j tcpre";
 	    }
 	}
 

Shorewall/Perl/Shorewall/Tunnels.pm

@@ -83,8 +83,8 @@ sub setup_tunnels() {
 	    for my $zone ( split_list $gatewayzones, 'zone' ) {
 		my $type = zone_type( $zone );
 		fatal_error "Invalid zone ($zone) for GATEWAY ZONE" if $type == FIREWALL || $type == BPORT;
-		$inchainref  = ensure_filter_chain "${zone}2${fw}", 1;
-		$outchainref = ensure_filter_chain "${fw}2${zone}", 1;
+		$inchainref  = ensure_filter_chain rules_chain( ${zone}, ${fw} ), 1;
+		$outchainref = ensure_filter_chain rules_chain( ${fw}, ${zone} ), 1;
 
 		unless ( $capabilities{POLICY_MATCH} ) {
 		    add_tunnel_rule $inchainref,  "-p 50 $source -j ACCEPT";
@@ -239,8 +239,8 @@ sub setup_tunnels() {
 
 	fatal_error "Invalid tunnel ZONE ($zone)" if $zonetype == FIREWALL || $zonetype == BPORT;
 
-	my $inchainref  = ensure_filter_chain "${zone}2${fw}", 1;
-	my $outchainref = ensure_filter_chain "${fw}2${zone}", 1;
+	my $inchainref  = ensure_filter_chain rules_chain( ${zone}, ${fw} ), 1;
+	my $outchainref = ensure_filter_chain rules_chain( ${fw}, ${zone} ), 1;
 
 	$gateway = ALLIP if $gateway eq '-';
 

Shorewall/Perl/Shorewall/Zones.pm

@@ -60,6 +60,8 @@ our @EXPORT = qw( NOTHING
 		  interface_number
 		  find_interface
 		  known_interface
+		  get_physical
+		  physical_name
 		  have_bridges
 		  port_to_bridge
 		  source_port_to_bridge
@@ -73,7 +75,7 @@ our @EXPORT = qw( NOTHING
 		 );
 
 our @EXPORT_OK = qw( initialize );
-our $VERSION = '4.4_0';
+our $VERSION = '4.4_4';
 
 #
 # IPSEC Option types
@@ -135,7 +137,8 @@ our %reservedName = ( all => 1,
 #
 #     %interfaces { <interface1> => { name        => <name of interface>
 #                                     root        => <name without trailing '+'>
-#                                     options     => { <option1> = <val1> ,
+#                                     options     => { port => undef|1
+#                                                      <option1> = <val1> ,          #See %validinterfaceoptions
 #                                                      ...
 #                                                    }
 #                                     zone        => <zone name>
@@ -143,6 +146,7 @@ our %reservedName = ( all => 1,
 #                                     bridge      => <bridge>
 #                                     broadcasts  => 'none', 'detect' or [ <addr1>, <addr2>, ... ]
 #                                     number      => <ordinal position in the interfaces file>
+#                                     physical    => <physical interface name>
 #                                   }
 #                 }
 #
@@ -150,6 +154,7 @@ our @interfaces;
 our %interfaces;
 our @bport_zones;
 our %ipsets;
+our %physical;
 our $family;
 
 use constant { FIREWALL => 1,
@@ -163,26 +168,32 @@ use constant { SIMPLE_IF_OPTION   => 1,
 	       NUMERIC_IF_OPTION  => 4,
 	       OBSOLETE_IF_OPTION => 5,
 	       IPLIST_IF_OPTION   => 6,
+	       STRING_IF_OPTION   => 7,
+
 	       MASK_IF_OPTION     => 7,
-	       
+
 	       IF_OPTION_ZONEONLY => 8,
 	       IF_OPTION_HOST     => 16,
 	   };
 
 our %validinterfaceoptions;
 
+our %defaultinterfaceoptions = ( routefilter => 1 );
+
+our %maxoptionvalue = ( routefilter => 2, mss => 100000 );
+
 our %validhostoptions;
 
 #
-# Initialize globals -- we take this novel approach to globals initialization to allow
-#                       the compiler to run multiple times in the same process. The
-#                       initialize() function does globals initialization for this
-#                       module and is called from an INIT block below. The function is
-#                       also called by Shorewall::Compiler::compiler at the beginning of
-#                       the second and subsequent calls to that function or when compiling
-#                       for IPv6.
+# Rather than initializing globals in an INIT block or during declaration,
+# we initialize them in a function. This is done for two reasons:
+#
+#   1. Proper initialization depends on the address family which isn't
+#      known until the compiler has started.
+#
+#   2. The compiler can run multiple times in the same process so it has to be
+#      able to re-initialize its dependent modules' state.
 #
-
 sub initialize( $ ) {
     $family = shift;
     @zones = ();
@@ -193,6 +204,7 @@ sub initialize( $ ) {
     %interfaces = ();
     @bport_zones = ();
     %ipsets = ();
+    %physical = ();
 
     if ( $family == F_IPV4 ) {
 	%validinterfaceoptions = (arp_filter  => BINARY_IF_OPTION,
@@ -209,12 +221,13 @@ sub initialize( $ ) {
 				  optional    => SIMPLE_IF_OPTION,
 				  proxyarp    => BINARY_IF_OPTION,
 				  routeback   => SIMPLE_IF_OPTION + IF_OPTION_ZONEONLY + IF_OPTION_HOST,
-				  routefilter => BINARY_IF_OPTION ,
+				  routefilter => NUMERIC_IF_OPTION ,
 				  sourceroute => BINARY_IF_OPTION,
 				  tcpflags    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				  upnp        => SIMPLE_IF_OPTION,
 				  upnpclient  => SIMPLE_IF_OPTION,
 				  mss         => NUMERIC_IF_OPTION,
+				  physical    => STRING_IF_OPTION + IF_OPTION_HOST,
 				 );
 	%validhostoptions = (
 			     blacklist => 1,
@@ -239,7 +252,8 @@ sub initialize( $ ) {
 				    sourceroute => BINARY_IF_OPTION,
 				    tcpflags    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    mss         => NUMERIC_IF_OPTION,
-				    forward     => NUMERIC_IF_OPTION,
+				    forward     => BINARY_IF_OPTION,
+				    physical    => STRING_IF_OPTION + IF_OPTION_HOST,
 				 );
 	%validhostoptions = (
 			     blacklist => 1,
@@ -250,10 +264,6 @@ sub initialize( $ ) {
     }
 }
 
-INIT {
-    initialize( F_IPV4 );
-}
-
 #
 # Parse the passed option list and return a reference to a hash as follows:
 #
@@ -330,7 +340,7 @@ sub set_super( $ );
 
 sub set_super( $ ) {
     my $zoneref = shift;
-    
+
     unless ( $zoneref->{options}{super} ) {
 	$zoneref->{options}{super} = 1;
 	set_super( $zones{$_} ) for @{$zoneref->{parents}};
@@ -362,9 +372,9 @@ sub process_zone( \$ ) {
     fatal_error "Invalid zone name ($zone)"      unless $zone =~ /^[a-z]\w*$/i && length $zone <= $globals{MAXZONENAMELENGTH};
     fatal_error "Invalid zone name ($zone)"      if $reservedName{$zone} || $zone =~ /^all2|2all$/;
     fatal_error( "Duplicate zone name ($zone)" ) if $zones{$zone};
-    
-    if ( $type =~ /ipv([46])?/i ) {
-	fatal_error "Invalid zone type ($type)" if $1 && $1 != $family;
+
+    if ( $type =~ /^ip(v([46]))?$/i ) {
+	fatal_error "Invalid zone type ($type)" if $1 && $2 != $family;
 	$type = IP;
 	$$ip = 1;
     } elsif ( $type =~ /^ipsec([46])?$/i ) {
@@ -395,11 +405,11 @@ sub process_zone( \$ ) {
 	    }
 	}
     }
-    
+
     for ( $options, $in_options, $out_options ) {
 	$_ = '' if $_ eq '-';
     }
-    
+
     $zones{$zone} = { type       => $type,
 		      parents    => \@parents,
 		      bridge     => '',
@@ -414,9 +424,9 @@ sub process_zone( \$ ) {
 		      children   => [] ,
 		      hosts      => {}
 		    };
-    
+
     return $zone;
-    
+
 }
 #
 # Parse the zones file.
@@ -480,7 +490,7 @@ sub zone_report()
 
     if ( $family == F_IPV4 ) {
 	@translate = ( undef, 'firewall', 'ipv4', 'bport4', 'ipsec4' );
-    } else { 
+    } else {
 	@translate = ( undef, 'firewall', 'ipv6', 'bport6', 'ipsec6' );
     }
 
@@ -500,17 +510,19 @@ sub zone_report()
 		my $interfaceref = $hostref->{$type};
 
 		for my $interface ( sort keys %$interfaceref ) {
+		    my $iref     = $interfaces{$interface};
 		    my $arrayref = $interfaceref->{$interface};
 		    for my $groupref ( @$arrayref ) {
 			my $hosts      = $groupref->{hosts};
-			my $exclusions = join ',', @{$groupref->{exclusions}};
 			if ( $hosts ) {
-			    my $grouplist = join ',', ( @$hosts );
+			    my $grouplist  = join ',', ( @$hosts );
+			    my $exclusions = join ',', @{$groupref->{exclusions}};
 			    $grouplist = join '!', ( $grouplist, $exclusions) if $exclusions;
+		
 			    if ( $family == F_IPV4 ) {
-				progress_message_nocompress "      $interface:$grouplist";
+				progress_message_nocompress "      $iref->{physical}:$grouplist";
 			    } else {
-				progress_message_nocompress "      $interface:<$grouplist>";
+				progress_message_nocompress "      $iref->{physical}:<$grouplist>";
 			    }
 			    $printed = 1;
 			}
@@ -528,13 +540,16 @@ sub zone_report()
     }
 }
 
+#
+# This function is called to create the contents of the ${VARDIR}/zones file
+#
 sub dump_zone_contents()
 {
     my @xlate;
 
     if ( $family == F_IPV4 ) {
 	@xlate = ( undef, 'firewall', 'ipv4', 'bport4', 'ipsec4' );
-    } else { 
+    } else {
 	@xlate = ( undef, 'firewall', 'ipv6', 'bport6', 'ipsec6' );
     }
 
@@ -554,20 +569,21 @@ sub dump_zone_contents()
 		my $interfaceref = $hostref->{$type};
 
 		for my $interface ( sort keys %$interfaceref ) {
+		    my $iref     = $interfaces{$interface};
 		    my $arrayref = $interfaceref->{$interface};
 		    for my $groupref ( @$arrayref ) {
 			my $hosts     = $groupref->{hosts};
-			my $exclusions = join ',', @{$groupref->{exclusions}};
 
 			if ( $hosts ) {
-			    my $grouplist = join ',', ( @$hosts );
+			    my $grouplist  = join ',', ( @$hosts );
+			    my $exclusions = join ',', @{$groupref->{exclusions}};
 
 			    $grouplist = join '!', ( $grouplist, $exclusions ) if $exclusions;
 
 			    if ( $family == F_IPV4 ) {
-				$entry .= " $interface:$grouplist";
+				$entry .= " $iref->{physical}:$grouplist";
 			    } else {
-				$entry .= " $interface:<$grouplist>";
+				$entry .= " $iref->{physical}:<$grouplist>";
 			    }
 			}
 		    }
@@ -608,6 +624,7 @@ sub add_group_to_zone($$$$$)
     my @exclusions = ();
     my $new = \@newnetworks;
     my $switched = 0;
+    my $allip    = 0;
 
     for my $host ( @$networks ) {
 	$interfaces{$interface}{nets}++;
@@ -624,13 +641,17 @@ sub add_group_to_zone($$$$$)
 	unless ( $switched ) {
 	    if ( $type == $zonetype ) {
 		fatal_error "Duplicate Host Group ($interface:$host) in zone $zone" if $interfaces{$interface}{zone} eq $zone;
-		$interfaces{$interface}{zone} = $zone if $host eq ALLIP;
+		if ( $host eq ALLIP ) {
+		    fatal_error "Duplicate Host Group ($interface:$host) in zone $zone" if @newnetworks;
+		    $interfaces{$interface}{zone} = $zone;
+		    $allip = 1;
+		}
 	    }
 	}
 
 	if ( substr( $host, 0, 1 ) eq '+' ) {
 	    fatal_error "Invalid ipset name ($host)" unless $host =~ /^\+[a-zA-Z]\w*$/;
-	    require_capability( 'IPSET_MATCH', 'Ipset names in host lists', ''); 
+	    require_capability( 'IPSET_MATCH', 'Ipset names in host lists', '');
 	} else {
 	    validate_host $host, 0;
 	}
@@ -646,6 +667,8 @@ sub add_group_to_zone($$$$$)
     $typeref      = ( $hostsref->{$gtype}         || ( $hostsref->{$gtype} = {} ) );
     $interfaceref = ( $typeref->{$interface}      || ( $typeref->{$interface} = [] ) );
 
+    fatal_error "Duplicate Host Group ($interface:" . ALLIP . ") in zone $zone" if $allip && @$interfaceref;
+
     $zoneref->{options}{complex} = 1 if @$interfaceref || ( @newnetworks > 1 ) || ( @exclusions );
 
     push @{$interfaceref}, { options => $options,
@@ -705,8 +728,8 @@ sub firewall_zone() {
 #
 sub process_interface( $ ) {
     my $nextinum = $_[0];
-    my $nets;
-    my ($zone, $originalinterface, $networks, $options ) = split_line 2, 4, 'interfaces file';
+    my $netsref = '';
+    my ($zone, $originalinterface, $bcasts, $options ) = split_line 2, 4, 'interfaces file';
     my $zoneref;
     my $bridge = '';
 
@@ -719,18 +742,21 @@ sub process_interface( $ ) {
 	fatal_error "Firewall zone not allowed in ZONE column of interface record" if $zoneref->{type} == FIREWALL;
     }
 
-    $networks = '' if $networks eq '-';
+    $bcasts = '' if $bcasts eq '-';
     $options  = '' if $options  eq '-';
 
     my ($interface, $port, $extra) = split /:/ , $originalinterface, 3;
 
     fatal_error "Invalid INTERFACE ($originalinterface)" if ! $interface || defined $extra;
 
-    if ( defined $port ) {
+    if ( defined $port && $port ne '' ) {
 	fatal_error qq("Virtual" interfaces are not supported -- see http://www.shorewall.net/Shorewall_and_Aliased_Interfaces.html) if $port =~ /^\d+$/;
 	require_capability( 'PHYSDEV_MATCH', 'Bridge Ports', '');
 	fatal_error "Your iptables is not recent enough to support bridge ports" unless $capabilities{KLUDGEFREE};
+
+	fatal_error "Invalid Interface Name ($interface:$port)" unless $port =~ /^[\w.@%-]+\+?$/;
 	fatal_error "Duplicate Interface ($port)" if $interfaces{$port};
+
 	fatal_error "$interface is not a defined bridge" unless $interfaces{$interface} && $interfaces{$interface}{options}{bridge};
 	fatal_error "Bridge Ports may only be associated with 'bport' zones" if $zone && $zoneref->{type} != BPORT;
 
@@ -742,10 +768,6 @@ sub process_interface( $ ) {
 	    }
 	}
 
-	next if $port eq '';
-
-	fatal_error "Invalid Interface Name ($interface:$port)" unless $port =~ /^[\w.@%-]+\+?$/;
-
 	$bridge = $interface;
 	$interface = $port;
     } else {
@@ -764,11 +786,12 @@ sub process_interface( $ ) {
 	$root = $interface;
     }
 
+    my $physical = $interface;
     my $broadcasts;
 
-    unless ( $networks eq '' || $networks eq 'detect' ) {
-	my @broadcasts = split_list $networks, 'address';
-	
+    unless ( $bcasts eq '' || $bcasts eq 'detect' ) {
+	my @broadcasts = split_list $bcasts, 'address';
+
 	for my $address ( @broadcasts ) {
 	    fatal_error 'Invalid BROADCAST address' unless $address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/;
 	}
@@ -789,7 +812,7 @@ sub process_interface( $ ) {
     if ( $options ) {
 
 	my %hostoptions = ( dynamic => 0 );
-	    
+
 	for my $option (split_list1 $options, 'option' ) {
 	    next if $option eq '-';
 
@@ -811,12 +834,12 @@ sub process_interface( $ ) {
 		$hostoptions{$option} = 1 if $hostopt;
 	    } elsif ( $type == BINARY_IF_OPTION ) {
 		$value = 1 unless defined $value;
-		fatal_error "Option value for $option must be 0 or 1" unless ( $value eq '0' || $value eq '1' );
-		fatal_error "The $option option may not be used with a wild-card interface name" if $wildcard;
+		fatal_error "Option value for '$option' must be 0 or 1" unless ( $value eq '0' || $value eq '1' );
+		fatal_error "The '$option' option may not be used with a wild-card interface name" if $wildcard;
 		$options{$option} = $value;
 		$hostoptions{$option} = $value if $hostopt;
 	    } elsif ( $type == ENUM_IF_OPTION ) {
-		fatal_error "The $option option may not be used with a wild-card interface name" if $wildcard;
+		fatal_error "The '$option' option may not be used with a wild-card interface name" if $wildcard;
 		if ( $option eq 'arp_ignore' ) {
 		    if ( defined $value ) {
 			if ( $value =~ /^[1-3,8]$/ ) {
@@ -831,15 +854,14 @@ sub process_interface( $ ) {
 		    assert( 0 );
 		}
 	    } elsif ( $type == NUMERIC_IF_OPTION ) {
-		fatal_error "The $option option requires a value" unless defined $value;
+		$value = $defaultinterfaceoptions{$option} unless defined $value;
+		fatal_error "The '$option' option requires a value" unless defined $value;
 		my $numval = numeric_value $value;
-		fatal_error "Invalid value ($value) for option $option" unless defined $numval;
+		fatal_error "Invalid value ($value) for option $option" unless defined $numval && $numval <= $maxoptionvalue{$option};
 		$options{$option} = $numval;
 		$hostoptions{$option} = $numval if $hostopt;
 	    } elsif ( $type == IPLIST_IF_OPTION ) {
-		fatal_error "The $option option requires a value" unless defined $value;
-		fatal_error q("nets=" may not be specified for a multi-zone interface) unless $zone;
-		fatal_error "Duplicate $option option" if $nets;
+		fatal_error "The '$option' option requires a value" unless defined $value;
 		#
 		# Remove parentheses from address list if present
 		#
@@ -848,26 +870,55 @@ sub process_interface( $ ) {
 		# Add all IP to the front of a list if the list begins with '!'
 		#
 		$value = join ',' , ALLIP , $value if $value =~ /^!/;
-		
-		if ( $value eq 'dynamic' ) {
-		    require_capability( 'IPSET_MATCH', 'Dynamic nets', '');
-		    $value = "+${zone}_${interface}";
-		    $hostoptions{dynamic} = 1;
-		    $ipsets{"${zone}_${interface}"} = 1;
-		}   
-		#
-		# Convert into a Perl array reference
-		#
-		$nets = [ split_list $value, 'address' ];
-		#
-		# Assume 'broadcast'
-		#
-		$hostoptions{broadcast} = 1;
+
+		if ( $option eq 'nets' ) {
+		    fatal_error q("nets=" may not be specified for a multi-zone interface) unless $zone;
+		    fatal_error "Duplicate $option option" if $netsref;
+		    if ( $value eq 'dynamic' ) {
+			require_capability( 'IPSET_MATCH', 'Dynamic nets', '');
+			$hostoptions{dynamic} = 1;
+			#
+			# Defer remaining processing until we have the final physical interface name
+			#
+			$netsref = 'dynamic';
+		    } else {
+			$hostoptions{multicast} = 1;
+			#
+			# Convert into a Perl array reference
+			#
+			$netsref = [ split_list $value, 'address' ];
+		    }
+		    #
+		    # Assume 'broadcast'
+		    #
+		    $hostoptions{broadcast} = 1;
+		} else {
+		    assert(0);
+		}
+	    } elsif ( $type == STRING_IF_OPTION ) {
+		fatal_error "The '$option' option requires a value" unless defined $value;
+
+		if ( $option eq 'physical' ) {
+		    fatal_error "Invalid Physical interface name ($value)" unless $value =~ /^[\w.@%-]+\+?$/;
+
+		    fatal_error "Duplicate physical interface name ($value)" if ( $physical{$value} && ! $port );
+
+		    fatal_error "The type of 'physical' name ($value) doesn't match the type of interface name ($interface)" if $wildcard && ! $value =~ /\+$/;
+		    $physical = $value;
+		} else {
+		    assert(0);
+		}
 	    } else {
 		warning_message "Support for the $option interface option has been removed from Shorewall";
 	    }
 	}
 
+	if ( $netsref eq 'dynamic' ) {
+	    my $ipset = "${zone}_" . chain_base $physical;
+	    $netsref = [ "+$ipset" ];
+	    $ipsets{$ipset} = 1;
+	}
+
 	$zoneref->{options}{in_out}{routeback} = 1 if $zoneref && $options{routeback};
 
 	if ( $options{bridge} ) {
@@ -879,19 +930,26 @@ sub process_interface( $ ) {
 
     }
 
-    $interfaces{$interface} = { name       => $interface ,
-				bridge     => $bridge ,
-				nets       => 0 ,
-				number     => $nextinum ,
-				root       => $root ,
-				broadcasts => $broadcasts ,
-				options    => \%options ,
-			        zone       => ''
-			      };
+    $physical{$physical} = $interfaces{$interface} = { name       => $interface ,
+						       bridge     => $bridge ,
+						       nets       => 0 ,
+						       number     => $nextinum ,
+						       root       => $root ,
+						       broadcasts => $broadcasts ,
+						       options    => \%options ,
+						       zone       => '',
+						       physical   => $physical
+						     };
 
-    $nets = [ allip ] unless $nets; 
-
-    add_group_to_zone( $zone, $zoneref->{type}, $interface, $nets, $hostoptionsref ) if $zone;
+    if ( $zone ) {
+	$netsref ||= [ allip ];
+	add_group_to_zone( $zone, $zoneref->{type}, $interface, $netsref, $hostoptionsref );
+	add_group_to_zone( $zone, 
+			   $zoneref->{type}, 
+			   $interface, 
+			   [ IPv4_MULTICAST ], 
+			   { destonly => 1 } ) if $hostoptionsref->{multicast} && $interfaces{$interface}{zone} ne $zone;
+    } 
 
     progress_message "  Interface \"$currentline\" Validated";
 
@@ -938,6 +996,20 @@ sub validate_interfaces_file( $ ) {
     fatal_error "No network interfaces defined" unless @interfaces;
 }
 
+#
+# Map the passed name to the corresponding physical name in the passed interface
+#
+sub map_physical( $$ ) {
+    my ( $name, $interfaceref ) = @_;
+    my $physical = $interfaceref->{physical};
+    
+    return $physical if $name eq $interfaceref->{name};
+
+    $physical =~ s/\+$//;
+
+    $physical . substr( $name, length  $interfaceref->{root} );
+}  
+
 #
 # Returns true if passed interface matches an entry in /etc/shorewall/interfaces
 #
@@ -952,13 +1024,17 @@ sub known_interface($)
 
     for my $i ( @interfaces ) {
 	$interfaceref = $interfaces{$i};
-	my $val = $interfaceref->{root};
-	next if $val eq $i;
-	if ( substr( $interface, 0, length $val ) eq $val ) {
+	my $root = $interfaceref->{root};
+	if ( $i ne $root && substr( $interface, 0, length $root ) eq $root ) {
 	    #
-	    # Cache this result for future reference. We set the 'name' to the name of the entry that appears in /etc/shorewall/interfaces.
+	    # Cache this result for future reference. We set the 'name' to the name of the entry that appears in /etc/shorewall/interfaces and we do not set the root;
 	    #
-	    return $interfaces{$interface} = { options => $interfaceref->{options}, bridge => $interfaceref->{bridge} , name => $i , number => $interfaceref->{number} };
+	    return $interfaces{$interface} = { options  => $interfaceref->{options}, 
+					       bridge   => $interfaceref->{bridge} , 
+					       name     => $i , 
+					       number   => $interfaceref->{number} ,
+					       physical => map_physical( $interface, $interfaceref )
+					     };
 	}
     }
 
@@ -998,6 +1074,23 @@ sub find_interface( $ ) {
     $interfaceref;
 }
 
+#
+# Returns the physical interface associated with the passed logical name
+#
+sub get_physical( $ ) {
+    $interfaces{ $_[0] }->{physical};
+}
+
+#
+# This one doesn't insist that the passed name be the name of a configured interface
+#
+sub physical_name( $ ) {
+    my $device = shift;
+    my $devref = known_interface $device;
+
+    $devref ? $devref->{physical} : $device;
+}
+
 #
 # Returns true if there are bridge port zones defined in the config
 #
@@ -1038,7 +1131,11 @@ sub find_interfaces_by_option( $ ) {
     my @ints = ();
 
     for my $interface ( @interfaces ) {
-	my $optionsref = $interfaces{$interface}{options};
+	my $interfaceref = $interfaces{$interface};
+	
+	next unless $interfaceref->{root};
+
+	my $optionsref = $interfaceref->{options};
 	if ( $optionsref && defined $optionsref->{$option} ) {
 	    push @ints , $interface
 	}
@@ -1149,12 +1246,13 @@ sub process_host( ) {
 
     if ( $hosts eq 'dynamic' ) {
 	require_capability( 'IPSET_MATCH', 'Dynamic nets', '');
-	$hosts = "+${zone}_${interface}";
+	my $physical = physical_name $interface;
+	$hosts = "+${zone}_${physical}";
 	$optionsref->{dynamic} = 1;
-	$ipsets{"${zone}_${interface}"} = 1;
-	
+	$ipsets{"${zone}_${physical}"} = 1;
+
     }
-   
+
     add_group_to_zone( $zone, $type , $interface, [ split_list( $hosts, 'host' ) ] , $optionsref);
 
     progress_message "   Host \"$currentline\" validated";
@@ -1171,7 +1269,7 @@ sub validate_hosts_file()
 
     my $fn = open_file 'hosts';
 
-    first_entry "doing $fn...";
+    first_entry "$doing $fn...";
 
     $ipsec |= process_host while read_a_line;
 

Shorewall/Perl/compiler.pl

@@ -61,7 +61,7 @@ sub usage( $ ) {
     [ --family={4|6} ]
 ';
 
-    $returnval;
+    exit $returnval;
 }
 
 #
@@ -105,11 +105,11 @@ my $result = GetOptions('h'               => \$help,
 usage(1) unless $result && @ARGV < 2;
 usage(0) if $help;
 
-compiler( object          => defined $ARGV[0] ? $ARGV[0] : '', 
-	  directory       => $shorewall_dir, 
-	  verbosity       => $verbose, 
+compiler( script          => defined $ARGV[0] ? $ARGV[0] : '',
+	  directory       => $shorewall_dir,
+	  verbosity       => $verbose,
 	  timestamp       => $timestamp,
-	  debug           => $debug, 
+	  debug           => $debug,
 	  export          => $export,
 	  chains          => $chains,
 	  log             => $log,

Shorewall/Perl/prog.footer

@@ -1,283 +1,6 @@
 ###############################################################################
 # Code imported from /usr/share/shorewall/prog.footer
 ###############################################################################
-#
-# Clear Proxy Arp
-#
-delete_proxyarp() {
-    if [ -f ${VARDIR}/proxyarp ]; then
-	while read address interface external haveroute; do
-	    qt arp -i $external -d $address pub
-	    [ -z "${haveroute}${NOROUTES}" ] && qt $IP -4 route del $address dev $interface
-	    f=/proc/sys/net/ipv4/conf/$interface/proxy_arp
-	    [ -f $f ] && echo 0 > $f
-	done < ${VARDIR}/proxyarp
-    fi
-
-    rm -f ${VARDIR}/proxyarp
-}
-
-#
-# Remove all Shorewall-added rules
-#
-clear_firewall() {
-    stop_firewall
-
-    setpolicy INPUT ACCEPT
-    setpolicy FORWARD ACCEPT
-    setpolicy OUTPUT ACCEPT
-
-    run_iptables -F
-
-    echo 1 > /proc/sys/net/ipv4/ip_forward
-
-    if [ -n "$DISABLE_IPV6" ]; then
-	if [ -x $IPTABLES ]; then
-    	    $IP6TABLES -P INPUT   ACCEPT 2> /dev/null
-	    $IP6TABLES -P OUTPUT  ACCEPT 2> /dev/null
-	    $IP6TABLES -P FORWARD ACCEPT 2> /dev/null
-	fi
-    fi
-
-    run_clear_exit
-
-    set_state "Cleared"
-
-    logger -p kern.info "$PRODUCT Cleared"
-}
-
-#
-# Issue a message and stop/restore the firewall
-#
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-
-    if [ $LOG_VERBOSE -gt 1 ]; then
-        timestamp="$(date +'%_b %d %T') "
-        echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
-    fi
-
-    stop_firewall
-    [ -n "$TEMPFILE" ] && rm -f $TEMPFILE
-    exit 2
-}
-
-#
-# Issue a message and stop
-#
-startup_error() # $* = Error Message
-{
-    echo "   ERROR: $@: Firewall state not changed" >&2
-    case $COMMAND in
-        start)
-	    logger -p kern.err "ERROR:$PRODUCT start failed:Firewall state not changed"
-	    ;;
-	restart)
-	    logger -p kern.err "ERROR:$PRODUCT restart failed:Firewall state not changed"
-	    ;;
-	restore)
-	    logger -p kern.err "ERROR:$PRODUCT restore failed:Firewall state not changed"
-	    ;;
-    esac
-
-    if [ $LOG_VERBOSE -gt 1 ]; then
-        timestamp="$(date +'%_b %d %T') "
-
-	case $COMMAND in
-	    start)
-		echo "${timestamp}  ERROR:$PRODUCT start failed:Firewall state not changed" >> $STARTUP_LOG
-		;;
-	    restart)
-		echo "${timestamp}  ERROR:$PRODUCT restart failed:Firewall state not changed" >> $STARTUP_LOG
-		;;
-	    restore)
-		echo "${timestamp}  ERROR:$PRODUCT restore failed:Firewall state not changed" >> $STARTUP_LOG
-		;;
-	esac
-    fi
-
-    kill $$
-    exit 2
-}
-
-#
-# Run iptables and if an error occurs, stop/restore the firewall
-#
-run_iptables()
-{
-    local status
-
-    while [ 1 ]; do
-	$IPTABLES $@
-	status=$?
-	[ $status -ne 4 ] && break
-    done
-
-    if [ $status -ne 0 ]; then
-        error_message "ERROR: Command \"$IPTABLES $@\" Failed"
-	stop_firewall
-        exit 2
-    fi
-}
-
-#
-# Run iptables retrying exit status 4
-#
-do_iptables()
-{
-    local status
-
-    while [ 1 ]; do
-	$IPTABLES $@
-	status=$?
-	[ $status -ne 4 ] && return $status;
-    done
-}
-
-#
-# Run iptables and if an error occurs, stop/restore the firewall
-#
-run_ip()
-{
-    if ! $IP -4 $@; then
-	error_message "ERROR: Command \"$IP -4 $@\" Failed"
-	stop_firewall
-	exit 2
-    fi
-}
-
-#
-# Run tc and if an error occurs, stop/restore the firewall
-#
-run_tc() {
-    if ! $TC $@ ; then
-	error_message "ERROR: Command \"$TC $@\" Failed"
-	stop_firewall
-	exit 2
-    fi
-}
-
-#
-# Restore the rules generated by 'drop','reject','logdrop', etc.
-#
-restore_dynamic_rules() {
-    if [ -f ${VARDIR}/save ]; then
-	progress_message2 "Setting up dynamic rules..."
-	rangematch='source IP range'
-	while read target ignore1 ignore2 address ignore3 rest; do
-	    case $target in
-		DROP|reject|logdrop|logreject)
-		    case $rest in
-			$rangematch*)
-			    run_iptables -A dynamic -m iprange --src-range ${rest#source IP range} -j $target
-			    ;;
-			*)
-			    if [ -z "$rest" ]; then
-				run_iptables -A dynamic -s $address -j $target
-			    else
-				error_message "WARNING: Unable to restore dynamic rule \"$target $ignore1 $ignore2 $address $ignore3 $rest\""
-			    fi
-			    ;;
-		    esac
-		    ;;
-	    esac
-	done < ${VARDIR}/save
-    fi
-}
-
-#
-# Get a list of all configured broadcast addresses on the system
-#
-get_all_bcasts()
-{
-    $IP -f inet addr show 2> /dev/null | grep 'inet.*brd' | grep -v '/32 ' | sed 's/inet.*brd //; s/scope.*//;' | sort -u
-}
-
-#
-# Run the .iptables_restore_input as a set of discrete iptables commands
-#
-debug_restore_input() {
-    local first second rest table chain
-    #
-    # Clear the ruleset 
-    #
-    qt1 $IPTABLES -t mangle -F
-    qt1 $IPTABLES -t mangle -X
-
-    for chain in PREROUTING INPUT FORWARD POSTROUTING; do
-	qt1 $IPTABLES -t mangle -P $chain ACCEPT
-    done
-
-    qt1 $IPTABLES -t raw    -F
-    qt1 $IPTABLES -t raw    -X
-
-    for chain in PREROUTING OUTPUT; do
-	qt1 $IPTABLES -t raw -P $chain ACCEPT
-    done
-
-    run_iptables -t nat -F
-    run_iptables -t nat -X
-
-    for chain in PREROUTING POSTROUTING OUTPUT; do
-	qt1 $IPTABLES -t nat -P $chain ACCEPT
-    done
-
-    qt1 $IPTABLES -t filter -F
-    qt1 $IPTABLES -t filter -X
-
-    for chain in INPUT FORWARD OUTPUT; do
-	qt1 $IPTABLES -t filter -P $chain -P ACCEPT
-    done
-
-    while read first second rest; do
-	case $first in
-	    -*)
-		#
-		# We can't call run_iptables() here because the rules may contain quoted strings
-		#
-		eval $IPTABLES -t $table $first $second $rest
-
-		if [ $? -ne 0 ]; then
-		    error_message "ERROR: Command \"$IPTABLES $first $second $rest\" Failed"
-		    stop_firewall
-		    exit 2
-		fi
-		;;
-	    :*)
-		chain=${first#:}
-
-		if [ "x$second" = x- ]; then
-		    do_iptables -t $table -N $chain
-		else
-		    do_iptables -t $table -P $chain $second
-		fi
-
-		if [ $? -ne 0 ]; then
-		    error_message "ERROR: Command \"$IPTABLES $first $second $rest\" Failed"
-		    stop_firewall
-		    exit 2
-		fi
-		;;
-	    #
-	    # This grotesque hack with the table names works around a bug/feature with ash
-	    #
-	    '*'raw)
-		table=raw
-		;;
-	    '*'mangle)
-		table=mangle
-		;;
-	    '*'nat)
-		table=nat
-		;;
-	    '*'filter)
-		table=filter
-		;;
-	esac
-    done
-}
-
 #
 # Give Usage Information
 #
@@ -291,7 +14,7 @@ usage() {
 #
 # Start trace if first arg is "debug" or "trace"
 #
-if [ $# -gt 1 ]; then 
+if [ $# -gt 1 ]; then
     if [ "x$1" = "xtrace" ]; then
 	set -x
 	shift
@@ -304,6 +27,8 @@ fi
 initialize
 
 if [ -n "$STARTUP_LOG" ]; then
+    touch $STARTUP_LOG
+    chmod 0600 $STARTUP_LOG
     if [ ${SHOREWALL_INIT_SCRIPT:-0} -eq 1 ]; then
 	#
 	# We're being run by a startup script that isn't redirecting STDOUT
@@ -362,6 +87,7 @@ case "$COMMAND" in
 	    status=0
 	else
 	    progress_message3 "Starting $PRODUCT...."
+	    detect_configuration
 	    define_firewall
 	    status=$?
 	    [ -n "$SUBSYSLOCK" -a $status -eq 0 ] && touch $SUBSYSLOCK
@@ -371,6 +97,7 @@ case "$COMMAND" in
     stop)
 	[ $# -ne 1 ] && usage 2
 	progress_message3 "Stopping $PRODUCT...."
+	detect_configuration
 	stop_firewall
 	status=0
 	[ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
@@ -414,6 +141,7 @@ case "$COMMAND" in
 	    progress_message3 "Starting $PRODUCT...."
 	fi
 
+	detect_configuration
 	define_firewall
 	status=$?
 	if [ -n "$SUBSYSLOCK" ]; then
@@ -425,6 +153,7 @@ case "$COMMAND" in
 	[ $# -ne 1 ] && usage 2
 	if shorewall_is_started; then
 	    progress_message3 "Refreshing $PRODUCT...."
+	    detect_configuration
 	    define_firewall
 	    status=$?
 	    progress_message3 "done."
@@ -435,6 +164,7 @@ case "$COMMAND" in
 	;;
     restore)
 	[ $# -ne 1 ] && usage 2
+	detect_configuration
 	define_firewall
 	status=$?
 	if [ -n "$SUBSYSLOCK" ]; then

Shorewall/Perl/prog.footer6

@@ -1,244 +1,6 @@
 ###############################################################################
 # Code imported from /usr/share/shorewall/prog.footer6
 ###############################################################################
-#
-# Remove all Shorewall-added rules
-#
-clear_firewall() {
-    stop_firewall
-
-    setpolicy INPUT ACCEPT
-    setpolicy FORWARD ACCEPT
-    setpolicy OUTPUT ACCEPT
-
-    run_iptables -F
-
-    echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
-
-    run_clear_exit
-
-    set_state "Cleared"
-
-    logger -p kern.info "$PRODUCT Cleared"
-}
-
-#
-# Issue a message and stop/restore the firewall
-#
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-
-    if [ $LOG_VERBOSE -gt 1 ]; then
-        timestamp="$(date +'%_b %d %T') "
-        echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
-    fi
-
-    stop_firewall
-    [ -n "$TEMPFILE" ] && rm -f $TEMPFILE
-    exit 2
-}
-
-#
-# Issue a message and stop
-#
-startup_error() # $* = Error Message
-{
-    echo "   ERROR: $@: Firewall state not changed" >&2
-    case $COMMAND in
-        start)
-	    logger -p kern.err "ERROR:$PRODUCT start failed:Firewall state not changed"
-	    ;;
-	restart)
-	    logger -p kern.err "ERROR:$PRODUCT restart failed:Firewall state not changed"
-	    ;;
-	restore)
-	    logger -p kern.err "ERROR:$PRODUCT restore failed:Firewall state not changed"
-	    ;;
-    esac
-
-    if [ $LOG_VERBOSE -gt 1 ]; then
-        timestamp="$(date +'%_b %d %T') "
-
-	case $COMMAND in
-	    start)
-		echo "${timestamp}  ERROR:$PRODUCT start failed:Firewall state not changed" >> $STARTUP_LOG
-		;;
-	    restart)
-		echo "${timestamp}  ERROR:$PRODUCT restart failed:Firewall state not changed" >> $STARTUP_LOG
-		;;
-	    restore)
-		echo "${timestamp}  ERROR:$PRODUCT restore failed:Firewall state not changed" >> $STARTUP_LOG
-		;;
-	esac
-    fi
-
-    kill $$
-    exit 2
-}
-
-#
-# Run iptables and if an error occurs, stop/restore the firewall
-#
-run_iptables()
-{
-    local status
-
-    while [ 1 ]; do
-	$IP6TABLES $@
-	status=$?
-	[ $status -ne 4 ] && break
-    done
-
-    if [ $status -ne 0 ]; then
-        error_message "ERROR: Command \"$IP6TABLES $@\" Failed"
-	stop_firewall
-        exit 2
-    fi
-}
-
-#
-# Run iptables retrying exit status 4
-#
-do_iptables()
-{
-    local status
-
-    while [ 1 ]; do
-	$IP6TABLES $@
-	status=$?
-	[ $status -ne 4 ] && return $status;
-    done
-}
-
-#
-# Run iptables and if an error occurs, stop/restore the firewall
-#
-run_ip()
-{
-    if ! $IP -6 $@; then
-	error_message "ERROR: Command \"$IP -6 $@\" Failed"
-	stop_firewall
-	exit 2
-    fi
-}
-
-#
-# Run tc and if an error occurs, stop/restore the firewall
-#
-run_tc() {
-    if ! $TC $@ ; then
-	error_message "ERROR: Command \"$TC $@\" Failed"
-	stop_firewall
-	exit 2
-    fi
-}
-
-#
-# Restore the rules generated by 'drop','reject','logdrop', etc.
-#
-restore_dynamic_rules() {
-    if [ -f ${VARDIR}/save ]; then
-	progress_message2 "Setting up dynamic rules..."
-	rangematch='source IP range'
-	while read target ignore1 ignore2 address ignore3 rest; do
-	    case $target in
-		DROP|reject|logdrop|logreject)
-		    case $rest in
-			$rangematch*)
-			    run_iptables -A dynamic -m iprange --src-range ${rest#source IP range} -j $target
-			    ;;
-			*)
-			    if [ -z "$rest" ]; then
-				run_iptables -A dynamic -s $address -j $target
-			    else
-				error_message "WARNING: Unable to restore dynamic rule \"$target $ignore1 $ignore2 $address $ignore3 $rest\""
-			    fi
-			    ;;
-		    esac
-		    ;;
-	    esac
-	done < ${VARDIR}/save
-    fi
-}
-
-#
-# Run the .iptables_restore_input as a set of discrete iptables commands
-#
-debug_restore_input() {
-    local first second rest table chain
-    #
-    # Clear the ruleset 
-    #
-    qt1 $IP6TABLES -t mangle -F
-    qt1 $IP6TABLES -t mangle -X
-
-    for chain in PREROUTING INPUT FORWARD POSTROUTING; do
-	qt1 $IP6TABLES -t mangle -P $chain ACCEPT
-    done
-
-    qt1 $IP6TABLES -t raw    -F
-    qt1 $IP6TABLES -t raw    -X
-
-    for chain in PREROUTING OUTPUT; do
-	qt1 $IP6TABLES -t raw -P $chain ACCEPT
-    done
-
-    qt1 $IP6TABLES -t filter -F
-    qt1 $IP6TABLES -t filter -X
-
-    for chain in INPUT FORWARD OUTPUT; do
-	qt1 $IP6TABLES -t filter -P $chain -P ACCEPT
-    done
-
-    while read first second rest; do
-	case $first in
-	    -*)
-		#
-		# We can't call run_iptables() here because the rules may contain quoted strings
-		#
-		eval $IP6TABLES -t $table $first $second $rest
-
-		if [ $? -ne 0 ]; then
-		    error_message "ERROR: Command \"$IP6TABLES $first $second $rest\" Failed"
-		    stop_firewall
-		    exit 2
-		fi
-		;;
-	    :*)
-		chain=${first#:}
-
-		if [ "x$second" = x- ]; then
-		    do_iptables -t $table -N $chain
-		else
-		    do_iptables -t $table -P $chain $second
-		fi
-
-		if [ $? -ne 0 ]; then
-		    error_message "ERROR: Command \"$IP6TABLES $first $second $rest\" Failed"
-		    stop_firewall
-		    exit 2
-		fi
-		;;
-	    #
-	    # This grotesque hack with the table names works around a bug/feature with ash
-	    #
-	    '*'raw)
-		table=raw
-		;;
-	    '*'mangle)
-		table=mangle
-		;;
-	    '*'nat)
-		table=nat
-		;;
-	    '*'filter)
-		table=filter
-		;;
-	esac
-    done
-}
-
 #
 # Give Usage Information
 #
@@ -252,7 +14,7 @@ usage() {
 #
 # Start trace if first arg is "debug" or "trace"
 #
-if [ $# -gt 1 ]; then 
+if [ $# -gt 1 ]; then
     if [ "x$1" = "xtrace" ]; then
 	set -x
 	shift
@@ -265,6 +27,8 @@ fi
 initialize
 
 if [ -n "$STARTUP_LOG" ]; then
+    touch $STARTUP_LOG
+    chmod 0600 $STARTUP_LOG
     if [ ${SHOREWALL_INIT_SCRIPT:-0} -eq 1 ]; then
 	#
 	# We're being run by a startup script that isn't redirecting STDOUT
@@ -315,11 +79,11 @@ COMMAND="$1"
 
 [ -n "${PRODUCT:=Shorewall6}" ]
 
-kernel=$(printf "%2d%02d%02d\n" $(echo $(uname -r) 2> /dev/null | sed 's/-.*//' | tr '.' ' ' ) | head -n1)
+kernel=$(printf "%2d%02d%02d" $(uname -r 2> /dev/null | sed -e 's/-.*//' -e 's/^\([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*$/\1 \2 \3/g'))
 if [ $kernel -lt 20624 ]; then
     error_message "ERROR: $PRODUCT requires Linux kernel 2.6.24 or later"
     status=2
-else 
+else
     case "$COMMAND" in
 	start)
 	    [ $# -ne 1 ] && usage 2
@@ -328,6 +92,7 @@ else
 		status=0
 	    else
 		progress_message3 "Starting $PRODUCT...."
+		detect_configuration
 		define_firewall
 		status=$?
 		[ -n "$SUBSYSLOCK" -a $status -eq 0 ] && touch $SUBSYSLOCK
@@ -337,6 +102,7 @@ else
 	stop)
 	    [ $# -ne 1 ] && usage 2
 	    progress_message3 "Stopping $PRODUCT...."
+	    detect_configuration
 	    stop_firewall
 	    status=0
 	    [ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
@@ -379,6 +145,7 @@ else
 		progress_message3 "Starting $PRODUCT...."
 	    fi
 
+	    detect_configuration
 	    define_firewall
 	    status=$?
 	    if [ -n "$SUBSYSLOCK" ]; then
@@ -390,6 +157,7 @@ else
 	    [ $# -ne 1 ] && usage 2
 	    if shorewall6_is_started; then
 		progress_message3 "Refreshing $PRODUCT...."
+		detect_configuration
 		define_firewall
 		status=$?
 		progress_message3 "done."
@@ -400,6 +168,7 @@ else
 	    ;;
 	restore)
 	    [ $# -ne 1 ] && usage 2
+	    detect_configuration
 	    define_firewall
 	    status=$?
 	    if [ -n "$SUBSYSLOCK" ]; then

Shorewall/Perl/prog.header

@@ -255,7 +255,7 @@ reload_kernel_modules() {
 
     [ -z "$MODULESDIR" ] && \
 	uname=$(uname -r) && \
-	MODULESDIR=/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	MODULESDIR=/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
 
     MODULES=$(lsmod | cut -d ' ' -f1)
 
@@ -294,7 +294,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 
     [ -z "$MODULESDIR" ] && \
 	uname=$(uname -r) && \
-	MODULESDIR=/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	MODULESDIR=/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
 
     for directory in $(split $MODULESDIR); do
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
@@ -1071,6 +1071,283 @@ conditionally_flush_conntrack() {
     fi
 }
 
+#
+# Clear Proxy Arp
+#
+delete_proxyarp() {
+    if [ -f ${VARDIR}/proxyarp ]; then
+	while read address interface external haveroute; do
+	    qt arp -i $external -d $address pub
+	    [ -z "${haveroute}${NOROUTES}" ] && qt $IP -4 route del $address dev $interface
+	    f=/proc/sys/net/ipv4/conf/$interface/proxy_arp
+	    [ -f $f ] && echo 0 > $f
+	done < ${VARDIR}/proxyarp
+    fi
+
+    rm -f ${VARDIR}/proxyarp
+}
+
+#
+# Remove all Shorewall-added rules
+#
+clear_firewall() {
+    stop_firewall
+
+    setpolicy INPUT ACCEPT
+    setpolicy FORWARD ACCEPT
+    setpolicy OUTPUT ACCEPT
+
+    run_iptables -F
+
+    echo 1 > /proc/sys/net/ipv4/ip_forward
+
+    if [ -n "$DISABLE_IPV6" ]; then
+	if [ -x $IPTABLES ]; then
+    	    $IP6TABLES -P INPUT   ACCEPT 2> /dev/null
+	    $IP6TABLES -P OUTPUT  ACCEPT 2> /dev/null
+	    $IP6TABLES -P FORWARD ACCEPT 2> /dev/null
+	fi
+    fi
+
+    run_clear_exit
+
+    set_state "Cleared"
+
+    logger -p kern.info "$PRODUCT Cleared"
+}
+
+#
+# Issue a message and stop/restore the firewall
+#
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+
+    if [ $LOG_VERBOSE -gt 1 ]; then
+        timestamp="$(date +'%_b %d %T') "
+        echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
+    fi
+
+    stop_firewall
+    [ -n "$TEMPFILE" ] && rm -f $TEMPFILE
+    exit 2
+}
+
+#
+# Issue a message and stop
+#
+startup_error() # $* = Error Message
+{
+    echo "   ERROR: $@: Firewall state not changed" >&2
+    case $COMMAND in
+        start)
+	    logger -p kern.err "ERROR:$PRODUCT start failed:Firewall state not changed"
+	    ;;
+	restart)
+	    logger -p kern.err "ERROR:$PRODUCT restart failed:Firewall state not changed"
+	    ;;
+	restore)
+	    logger -p kern.err "ERROR:$PRODUCT restore failed:Firewall state not changed"
+	    ;;
+    esac
+
+    if [ $LOG_VERBOSE -gt 1 ]; then
+        timestamp="$(date +'%_b %d %T') "
+
+	case $COMMAND in
+	    start)
+		echo "${timestamp}  ERROR:$PRODUCT start failed:Firewall state not changed" >> $STARTUP_LOG
+		;;
+	    restart)
+		echo "${timestamp}  ERROR:$PRODUCT restart failed:Firewall state not changed" >> $STARTUP_LOG
+		;;
+	    restore)
+		echo "${timestamp}  ERROR:$PRODUCT restore failed:Firewall state not changed" >> $STARTUP_LOG
+		;;
+	esac
+    fi
+
+    kill $$
+    exit 2
+}
+
+#
+# Run iptables and if an error occurs, stop/restore the firewall
+#
+run_iptables()
+{
+    local status
+
+    while [ 1 ]; do
+	$IPTABLES $@
+	status=$?
+	[ $status -ne 4 ] && break
+    done
+
+    if [ $status -ne 0 ]; then
+        error_message "ERROR: Command \"$IPTABLES $@\" Failed"
+	stop_firewall
+        exit 2
+    fi
+}
+
+#
+# Run iptables retrying exit status 4
+#
+do_iptables()
+{
+    local status
+
+    while [ 1 ]; do
+	$IPTABLES $@
+	status=$?
+	[ $status -ne 4 ] && return $status;
+    done
+}
+
+#
+# Run iptables and if an error occurs, stop/restore the firewall
+#
+run_ip()
+{
+    if ! $IP -4 $@; then
+	error_message "ERROR: Command \"$IP -4 $@\" Failed"
+	stop_firewall
+	exit 2
+    fi
+}
+
+#
+# Run tc and if an error occurs, stop/restore the firewall
+#
+run_tc() {
+    if ! $TC $@ ; then
+	error_message "ERROR: Command \"$TC $@\" Failed"
+	stop_firewall
+	exit 2
+    fi
+}
+
+#
+# Restore the rules generated by 'drop','reject','logdrop', etc.
+#
+restore_dynamic_rules() {
+    if [ -f ${VARDIR}/save ]; then
+	progress_message2 "Setting up dynamic rules..."
+	rangematch='source IP range'
+	while read target ignore1 ignore2 address ignore3 rest; do
+	    case $target in
+		DROP|reject|logdrop|logreject)
+		    case $rest in
+			$rangematch*)
+			    run_iptables -A dynamic -m iprange --src-range ${rest#source IP range} -j $target
+			    ;;
+			*)
+			    if [ -z "$rest" ]; then
+				run_iptables -A dynamic -s $address -j $target
+			    else
+				error_message "WARNING: Unable to restore dynamic rule \"$target $ignore1 $ignore2 $address $ignore3 $rest\""
+			    fi
+			    ;;
+		    esac
+		    ;;
+	    esac
+	done < ${VARDIR}/save
+    fi
+}
+
+#
+# Get a list of all configured broadcast addresses on the system
+#
+get_all_bcasts()
+{
+    $IP -f inet addr show 2> /dev/null | grep 'inet.*brd' | grep -v '/32 ' | sed 's/inet.*brd //; s/scope.*//;' | sort -u
+}
+
+#
+# Run the .iptables_restore_input as a set of discrete iptables commands
+#
+debug_restore_input() {
+    local first second rest table chain
+    #
+    # Clear the ruleset
+    #
+    qt1 $IPTABLES -t mangle -F
+    qt1 $IPTABLES -t mangle -X
+
+    for chain in PREROUTING INPUT FORWARD POSTROUTING; do
+	qt1 $IPTABLES -t mangle -P $chain ACCEPT
+    done
+
+    qt1 $IPTABLES -t raw    -F
+    qt1 $IPTABLES -t raw    -X
+
+    for chain in PREROUTING OUTPUT; do
+	qt1 $IPTABLES -t raw -P $chain ACCEPT
+    done
+
+    run_iptables -t nat -F
+    run_iptables -t nat -X
+
+    for chain in PREROUTING POSTROUTING OUTPUT; do
+	qt1 $IPTABLES -t nat -P $chain ACCEPT
+    done
+
+    qt1 $IPTABLES -t filter -F
+    qt1 $IPTABLES -t filter -X
+
+    for chain in INPUT FORWARD OUTPUT; do
+	qt1 $IPTABLES -t filter -P $chain -P ACCEPT
+    done
+
+    while read first second rest; do
+	case $first in
+	    -*)
+		#
+		# We can't call run_iptables() here because the rules may contain quoted strings
+		#
+		eval $IPTABLES -t $table $first $second $rest
+
+		if [ $? -ne 0 ]; then
+		    error_message "ERROR: Command \"$IPTABLES $first $second $rest\" Failed"
+		    stop_firewall
+		    exit 2
+		fi
+		;;
+	    :*)
+		chain=${first#:}
+
+		if [ "x$second" = x- ]; then
+		    do_iptables -t $table -N $chain
+		else
+		    do_iptables -t $table -P $chain $second
+		fi
+
+		if [ $? -ne 0 ]; then
+		    error_message "ERROR: Command \"$IPTABLES $first $second $rest\" Failed"
+		    stop_firewall
+		    exit 2
+		fi
+		;;
+	    #
+	    # This grotesque hack with the table names works around a bug/feature with ash
+	    #
+	    '*'raw)
+		table=raw
+		;;
+	    '*'mangle)
+		table=mangle
+		;;
+	    '*'nat)
+		table=nat
+		;;
+	    '*'filter)
+		table=filter
+		;;
+	esac
+    done
+}
+
 ################################################################################
 # End of functions in /usr/share/shorewall/prog.header
 ################################################################################

Shorewall/Perl/prog.header6

@@ -268,7 +268,7 @@ reload_kernel_modules() {
 
     [ -n "${MODULE_SUFFIX:=o gz ko o.gz ko.gz}" ]
 
-    [ -z "$MODULESDIR" ] && MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv6/netfilter:/lib/modules/$(uname -r)/kernel/net/netfilter
+    [ -z "$MODULESDIR" ] && MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv6/netfilter:/lib/modules/$(uname -r)/kernel/net/netfilter:/lib/modules/$(uname -r)/kernel/net/sched/
     MODULES=$(lsmod | cut -d ' ' -f1)
 
     for directory in $(split $MODULESDIR); do
@@ -304,7 +304,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
     [ -n "${MODULE_SUFFIX:=o gz ko o.gz ko.gz}" ]
 
     [ -z "$MODULESDIR" ] && \
-	MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv6/netfilter:/lib/modules/$(uname -r)/kernel/net/netfilter
+	MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv6/netfilter:/lib/modules/$(uname -r)/kernel/net/netfilter:/lib/modules/$(uname -r)/kernel/net/sched/
 
     for directory in $(split $MODULESDIR); do
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
@@ -578,7 +578,7 @@ convert_to_anycast() {
     local l
 
     while read address; do
-	case $address in 
+	case $address in
 	    2*|3*)
 		vlsm=${address#*/}
 		vlsm=${vlsm:=128}
@@ -626,7 +626,7 @@ convert_to_anycast() {
 			badress=$address
 		    fi
 		    #
-		    # Note: at this point $address and $badress are the same except possibly for 
+		    # Note: at this point $address and $badress are the same except possibly for
 		    #       the contents of the last half-word
 		    #
 		    list_count $(split $address)
@@ -663,7 +663,7 @@ convert_to_anycast() {
 
 #
 # Generate a list of anycast addresses for a given interface
-# 
+#
 
 get_interface_acasts() # $1 = interface
 {
@@ -946,6 +946,244 @@ conditionally_flush_conntrack() {
     fi
 }
 
+#
+# Remove all Shorewall-added rules
+#
+clear_firewall() {
+    stop_firewall
+
+    setpolicy INPUT ACCEPT
+    setpolicy FORWARD ACCEPT
+    setpolicy OUTPUT ACCEPT
+
+    run_iptables -F
+
+    echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
+
+    run_clear_exit
+
+    set_state "Cleared"
+
+    logger -p kern.info "$PRODUCT Cleared"
+}
+
+#
+# Issue a message and stop/restore the firewall
+#
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+
+    if [ $LOG_VERBOSE -gt 1 ]; then
+        timestamp="$(date +'%_b %d %T') "
+        echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
+    fi
+
+    stop_firewall
+    [ -n "$TEMPFILE" ] && rm -f $TEMPFILE
+    exit 2
+}
+
+#
+# Issue a message and stop
+#
+startup_error() # $* = Error Message
+{
+    echo "   ERROR: $@: Firewall state not changed" >&2
+    case $COMMAND in
+        start)
+	    logger -p kern.err "ERROR:$PRODUCT start failed:Firewall state not changed"
+	    ;;
+	restart)
+	    logger -p kern.err "ERROR:$PRODUCT restart failed:Firewall state not changed"
+	    ;;
+	restore)
+	    logger -p kern.err "ERROR:$PRODUCT restore failed:Firewall state not changed"
+	    ;;
+    esac
+
+    if [ $LOG_VERBOSE -gt 1 ]; then
+        timestamp="$(date +'%_b %d %T') "
+
+	case $COMMAND in
+	    start)
+		echo "${timestamp}  ERROR:$PRODUCT start failed:Firewall state not changed" >> $STARTUP_LOG
+		;;
+	    restart)
+		echo "${timestamp}  ERROR:$PRODUCT restart failed:Firewall state not changed" >> $STARTUP_LOG
+		;;
+	    restore)
+		echo "${timestamp}  ERROR:$PRODUCT restore failed:Firewall state not changed" >> $STARTUP_LOG
+		;;
+	esac
+    fi
+
+    kill $$
+    exit 2
+}
+
+#
+# Run iptables and if an error occurs, stop/restore the firewall
+#
+run_iptables()
+{
+    local status
+
+    while [ 1 ]; do
+	$IP6TABLES $@
+	status=$?
+	[ $status -ne 4 ] && break
+    done
+
+    if [ $status -ne 0 ]; then
+        error_message "ERROR: Command \"$IP6TABLES $@\" Failed"
+	stop_firewall
+        exit 2
+    fi
+}
+
+#
+# Run iptables retrying exit status 4
+#
+do_iptables()
+{
+    local status
+
+    while [ 1 ]; do
+	$IP6TABLES $@
+	status=$?
+	[ $status -ne 4 ] && return $status;
+    done
+}
+
+#
+# Run iptables and if an error occurs, stop/restore the firewall
+#
+run_ip()
+{
+    if ! $IP -6 $@; then
+	error_message "ERROR: Command \"$IP -6 $@\" Failed"
+	stop_firewall
+	exit 2
+    fi
+}
+
+#
+# Run tc and if an error occurs, stop/restore the firewall
+#
+run_tc() {
+    if ! $TC $@ ; then
+	error_message "ERROR: Command \"$TC $@\" Failed"
+	stop_firewall
+	exit 2
+    fi
+}
+
+#
+# Restore the rules generated by 'drop','reject','logdrop', etc.
+#
+restore_dynamic_rules() {
+    if [ -f ${VARDIR}/save ]; then
+	progress_message2 "Setting up dynamic rules..."
+	rangematch='source IP range'
+	while read target ignore1 ignore2 address ignore3 rest; do
+	    case $target in
+		DROP|reject|logdrop|logreject)
+		    case $rest in
+			$rangematch*)
+			    run_iptables -A dynamic -m iprange --src-range ${rest#source IP range} -j $target
+			    ;;
+			*)
+			    if [ -z "$rest" ]; then
+				run_iptables -A dynamic -s $address -j $target
+			    else
+				error_message "WARNING: Unable to restore dynamic rule \"$target $ignore1 $ignore2 $address $ignore3 $rest\""
+			    fi
+			    ;;
+		    esac
+		    ;;
+	    esac
+	done < ${VARDIR}/save
+    fi
+}
+
+#
+# Run the .iptables_restore_input as a set of discrete iptables commands
+#
+debug_restore_input() {
+    local first second rest table chain
+    #
+    # Clear the ruleset
+    #
+    qt1 $IP6TABLES -t mangle -F
+    qt1 $IP6TABLES -t mangle -X
+
+    for chain in PREROUTING INPUT FORWARD POSTROUTING; do
+	qt1 $IP6TABLES -t mangle -P $chain ACCEPT
+    done
+
+    qt1 $IP6TABLES -t raw    -F
+    qt1 $IP6TABLES -t raw    -X
+
+    for chain in PREROUTING OUTPUT; do
+	qt1 $IP6TABLES -t raw -P $chain ACCEPT
+    done
+
+    qt1 $IP6TABLES -t filter -F
+    qt1 $IP6TABLES -t filter -X
+
+    for chain in INPUT FORWARD OUTPUT; do
+	qt1 $IP6TABLES -t filter -P $chain -P ACCEPT
+    done
+
+    while read first second rest; do
+	case $first in
+	    -*)
+		#
+		# We can't call run_iptables() here because the rules may contain quoted strings
+		#
+		eval $IP6TABLES -t $table $first $second $rest
+
+		if [ $? -ne 0 ]; then
+		    error_message "ERROR: Command \"$IP6TABLES $first $second $rest\" Failed"
+		    stop_firewall
+		    exit 2
+		fi
+		;;
+	    :*)
+		chain=${first#:}
+
+		if [ "x$second" = x- ]; then
+		    do_iptables -t $table -N $chain
+		else
+		    do_iptables -t $table -P $chain $second
+		fi
+
+		if [ $? -ne 0 ]; then
+		    error_message "ERROR: Command \"$IP6TABLES $first $second $rest\" Failed"
+		    stop_firewall
+		    exit 2
+		fi
+		;;
+	    #
+	    # This grotesque hack with the table names works around a bug/feature with ash
+	    #
+	    '*'raw)
+		table=raw
+		;;
+	    '*'mangle)
+		table=mangle
+		;;
+	    '*'nat)
+		table=nat
+		;;
+	    '*'filter)
+		table=filter
+		;;
+	esac
+    done
+}
+
 ################################################################################
 # End of functions imported from /usr/share/shorewall/prog.header6
 ################################################################################

Shorewall/changelog.txt

@@ -1,19 +1,180 @@
+Changes in Shorewall 4.4.5.4
 
-Changes in Shorewall 4.4.0.2
+1)  Fix breakage in Shorewall6 'forward' interface option.
 
-1)  Fix MULTICAST=Yes and ACCEPT policy.
+Changes in Shorewall 4.4.5.3
 
-2)  Allow extension of zone definition with nets=.
+1)  Yet another fix for the ^%$& ROUTE_FILTER mess.
 
-3)  Don't allow nets= in a multi-zone interface definition.
+Changes in Shorewall 4.4.5.2
 
-Changes in Shorewall 4.4.0.1
+1)  Allow KERNELVERSION in capabilities file.
 
-1)  Updated release versions.
+Changes in Shorewall 4.4.5.1
 
-2)  Fix log level in rules at the end of INPUT and OUTPUT
+1)  Handle rp_filter and kernel's 2.6.31 and later.
 
-3)  Correct handling of nested IPSEC chains.
+Changes in Shorewall 4.4.5
+
+1)  Fix 15-port limit removal change.
+
+2)  Fix handling of interfaces with the 'bridge' option.
+
+3)  Generate error for port number 0
+
+4)  Allow zone::serverport in rules DEST column.
+
+5)  Fix 'show policies' in Shorewall6.
+
+6)  Auto-load tc modules.
+
+7)  Allow LOGFILE=/dev/null
+
+8)  Fix shorewall6-lite/shorecap
+
+9) Fix MODULE_SUFFIX.
+
+10) Fix ENHANCED_REJECT detection for IPv4.
+
+11) Fix DONT_LOAD vs 'reload -c'
+
+12) Fix handling of SOURCE and DEST vs macros.
+
+13) Remove silly logic in expand_rule().
+
+14) Add current and limit to Conntrack Table Heading.
+
+Changes in Shorewall 4.4.4
+
+1)  Change STARTUP_LOG and LOG_VERBOSITY in default shorewall6.conf.
+
+2)  Fix access to uninitialized variable.
+
+3)  Add logrotate scripts.
+
+4)  Allow long port lists in /etc/shorewall/routestopped.
+
+5)  Implement 'physical' interface option.
+
+6)  Implement ZONE2ZONE option.
+
+7)  Suppress duplicate COMMENT warnings.
+
+8)  Implement 'show policies' command.
+
+9)  Fix route_rule suppression for down provider.
+
+10) Suppress redundant tests for provider availability in route rules
+    processing.
+
+11) Implement the '-l' option to the 'show' command.
+
+12) Fix class number assignment when WIDE_TC_MARKS=Yes
+
+13) Allow wide marks in tcclasses when WIDE_TC_MARKS=Yes
+
+Changes in Shorewall 4.4.3
+
+1)  Move Debian INITLOG initialization to /etc/default/shorewall
+
+2)  Fix 'routeback' in /etc/shorewall/routestopped.
+
+3)  Rename 'object' to 'script' in compiler and config modules.
+
+4)  Correct RETAIN_ALIASES=No.
+
+5)  Fix detection of IP config.
+
+6)  Fix nested zones.
+
+7)  Move all function declarations from prog.footer to prog.header
+
+8)  Remove superfluous variables from generated script
+
+9)  Make 'track' the default.
+
+10)  Add TRACK_PROVIDERS option.
+
+11)  Fix IPv6 address parsing bug.
+
+12)  Add hack to work around iproute IPv6 bug in route handling
+
+13)  Correct messages issued when an optional provider is not usable.
+
+14)  Fix optional interfaces.
+
+15)  Add 'limit' option to tcclasses.
+
+Changes in Shorewall 4.4.2
+
+1)  BUGFIX: Correct detection of Persistent SNAT support
+
+2)  BUGFIX: Fix chain table initialization
+
+3)  BUGFIX: Validate routestopped file on 'check'
+
+4)  Let the Actions module add the builtin actions to
+    %Shorewall::Chains::targets. Much better modularization that way.
+
+5)  Some changes to make Lenny->Squeeze less painful.
+
+6)  Allow comments at the end of continued lines.
+
+7)  Call process_routestopped() during 'check' rather than
+    'compile_stop_firewall()'.
+
+8)  Don't look for an extension script for built-in actions.
+
+9)  Apply Jesse Shrieve's patch for SNAT range.
+
+10) Add -<family> to 'ip route del default' command.
+
+11) Add three new columns to macro body.
+
+12) Change 'wait4ifup' so that it requires no PATH
+
+13) Allow extension scripts for accounting chains.
+
+14) Allow per-ip LIMIT to work on ancient iptables releases.
+
+15) Add 'MARK' column to action body.
+
+Changes in Shorewall 4.4.1
+
+1)  Deleted extra 'use ...IPAddrs.pm' from Nat.pm.
+
+2)  Deleted superfluous export from Chains.pm.
+
+3)  Added support for --persistent.
+
+4)  Don't do module initialization in an INIT block.
+
+5)  Minor performance improvements.
+
+6)  Add 'clean' target to Makefile.
+
+7)  Redefine 'full' for sub-classes.
+
+8)  Fix log level in rules at the end of INPUT and OUTPUT chains.
+
+9)  Fix nested ipsec zones.
+
+10) Change one-interface sample to IP_FORWARDING=Off.
+
+11) Allow multicast to non-dynamic zones defined with nets=.
+
+12) Allow zones with nets= to be extended by /etc/shorewall/hosts
+    entries.
+
+13) Don't allow nets= in a multi-zone interface definition.
+
+14) Fix rule generated by MULTICAST=Yes
+
+15) Fix silly hole in zones file parsing.
+
+16) Tighen up zone membership checking.
+
+17) Combine portlist-spitting routines into a single function.
 
 Changes in Shorewall 4.4.0
 
@@ -27,7 +188,7 @@ Changes in Shorewall 4.4.0
 
 5)  Fix 'upnpclient' with required interfaces.
 
-5)  Fix provider number in 
+6)  Fix provider number in masq file.
 
 Changes in Shorewall 4.4.0-RC2
 
@@ -233,10 +394,8 @@ Changes in Shorewall 4.3.5
 
 1)  Remove support for shorewall-shell.
 
-2)  Combine shorewall-common and shorewall-perl to product shorewall.
+2)  Combine shorewall-common and shorewall-perl to produce shorewall.
 
 3)  Add nets= OPTION in interfaces file.
 
-4)  Add SAME MARK/CLASSIFY target
-
 

Shorewall/configfiles/findgw

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - Filegw File
+# Shorewall version 4 - Findgw File
 #
 # /etc/shorewall/findgw
 #

Shorewall/configfiles/shorewall.conf

@@ -32,9 +32,9 @@ VERBOSITY=1
 
 LOGFILE=/var/log/messages
 
-STARTUP_LOG=
+STARTUP_LOG=/var/log/shorewall-init.log
 
-LOG_VERBOSITY=
+LOG_VERBOSITY=2
 
 LOGFORMAT="Shorewall:%s:%s:"
 
@@ -189,6 +189,10 @@ AUTOMAKE=No
 
 WIDE_TC_MARKS=No
 
+TRACK_PROVIDERS=No
+
+ZONE2ZONE=2
+
 ###############################################################################
 #			P A C K E T   D I S P O S I T I O N
 ###############################################################################

Shorewall/default.debian

@@ -21,4 +21,9 @@ startup=0
 
 OPTIONS=""
 
+#
+# Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf
+#
+INITLOG=/dev/null
+
 # EOF

Shorewall/init.debian.sh

@@ -15,13 +15,11 @@
 SRWL=/sbin/shorewall
 SRWL_OPTS="-tvv"
 WAIT_FOR_IFUP=/usr/share/shorewall/wait4ifup
-# Note, set INITLOG to /dev/null if you want to
-# use Shorewall's STARTUP_LOG feature.
-INITLOG=/var/log/shorewall-init.log
+test -n ${INITLOG:=/var/log/shorewall-init.log}
 
 test -x $SRWL || exit 0
 test -x $WAIT_FOR_IFUP || exit 0
-test -n $INITLOG || {
+test -n "$INITLOG" || {
 	echo "INITLOG cannot be empty, please configure $0" ; 
 	exit 1;
 }
@@ -49,7 +47,7 @@ not_configured () {
 	then
 		echo ""
 		echo "Please read about Debian specific customization in"
-		echo "/usr/share/doc/shorewall-common/README.Debian.gz."
+		echo "/usr/share/doc/shorewall/README.Debian.gz."
 	fi
 	echo "#################"
 	exit 0

Shorewall/install.sh

@@ -22,7 +22,7 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {
@@ -176,7 +176,7 @@ else
     fi
 
     if [ -z "$CYGWIN" ]; then
-	if [ -d /etc/apt -a -e /usr/bin/dpkg ]; then
+	if [ -f /etc/debian_version ]; then
 	    DEBIAN=yes
 	elif [ -f /etc/slackware-version ] ; then
 	    echo "installing Slackware specific configuration..."
@@ -242,6 +242,12 @@ mkdir -p ${PREFIX}/var/lib/shorewall
 chmod 755 ${PREFIX}/etc/shorewall
 chmod 755 ${PREFIX}/usr/share/shorewall
 chmod 755 ${PREFIX}/usr/share/shorewall/configfiles
+
+if [ -n "$PREFIX" ]; then
+    mkdir -p ${PREFIX}/etc/logrotate.d
+    chmod 755 ${PREFIX}/etc/logrotate.d
+fi
+    
 #
 # Install the config file
 #
@@ -453,6 +459,15 @@ if [ -z "$CYGWIN" -a ! -f ${PREFIX}/etc/shorewall/blacklist ]; then
     echo "Blacklist file installed as ${PREFIX}/etc/shorewall/blacklist"
 fi
 #
+# Install the findgw file
+#
+run_install $OWNERSHIP -m 0644 configfiles/findgw ${PREFIX}/usr/share/shorewall/configfiles/findgw
+
+if [ -z "$CYGWIN" -a ! -f ${PREFIX}/etc/shorewall/findgw ]; then
+    run_install $OWNERSHIP -m 0600 configfiles/findgw ${PREFIX}/etc/shorewall/findgw
+    echo "Find GW file installed as ${PREFIX}/etc/shorewall/findgw"
+fi
+#
 # Delete the Routes file
 #
 delete_file ${PREFIX}/etc/shorewall/routes
@@ -783,6 +798,16 @@ cd ..
 
 echo "Man Pages Installed"
 
+if [ -d ${PREFIX}/etc/logrotate.d ]; then
+    run_install $OWNERSHIP -m 0644 logrotate ${PREFIX}/etc/logrotate.d/shorewall
+    echo "Logrotate file installed as ${PREFIX}/etc/logrotate.d/shorewall"
+fi
+
+if [ -z "$PREFIX" ]; then
+    rm -rf /usr/share/shorewall-perl
+    rm -rf /usr/share/shorewall-shell
+fi
+
 if [ -z "$PREFIX" -a -n "$first_install" -a -z "$CYGWIN" ]; then
     if [ -n "$DEBIAN" ]; then
 	run_install $OWNERSHIP -m 0644 default.debian /etc/default/shorewall

Shorewall/known_problems.txt

@@ -1,31 +1,48 @@
-1)  If ULOG is specified as the LOG LEVEL in the all->all policy, the
-    rules at the end of the INPUT and OUTPUT chains still use the
-    LOG target rather than ULOG.
+1)  In kernel 2.6.31, the handling of the rp_filter interface option was
+    changed incompatibly. Previously, the effective value was determined
+    by the setting of net.ipv4.config.dev.rp_filter logically ANDed with
+    the setting of net.ipv4.config.all.rp_filter.
 
-    You can work around this problem by adding two additional policies
-    before the all->all one:
+    Beginning with kernel 2.6.31, the value is the arithmetic MAX of
+    those two values. 
 
-    	   all 		$FW	DROP	ULOG
-	   $FW		all	REJECT	ULOG
+    Given that Shorewall sets net.ipv4.config.all.rp_filter to 1 if
+    there are any interfaces specifying 'routefilter', specifying
+    'routefilter' on any interface has the effect of setting the option
+    on all interfaces.
 
-    This problem was corrected in Shorewall 4.4.0.1.
+    A workaround for this problem is included in Shorewall 4.4.5.1.
 
-2)  Use of CONTINUE policies with a nested IPSEC zone was broken in
-    some cases.
+2)  When using an up-to-date capabilities file with Shorewall 4.4.5.1, the
+    following warning messages were issued.
 
-    This problem was corrected in Shorewall 4.4.0.1.
+       WARNING: Unknown capability (KERNELVERSION) 
+         ignored : /etc/shorewall2/capabilities (line 49)
+       WARNING: Your capabilities file does not contain a Kernel Version --
+         using 2.6.30
 
-3)  If MULTICAST=Yes in shorewall.conf, multicast traffic is
-    incorrectly exempted from ACCEPT policies.
+    This defect was corrected in 4.4.5.2.
 
-    This problem was corrected in Shorewall 4.4.0.2.
+3)  'shorewall6 start' on Shorewall 4.4.5.2 generates a Perl run-time
+    error. Also, handling of ROUTE_FILTER on kernel 2.6.31 and later
+    was broken.
 
-4)  If a zone is defined with "nets=" in /etc/shorewall/zones, that
-    definition cannot be extended by entries in /etc/shorewall/hosts.
+    This was fixed in 4.4.5.3.
 
-    This problem was corrected in Shorewall 4.4.0.2.
+4)  With Shorewall 4.4.5.3, using a capabilities file with Shorewall6
+    will result in the following warnings during compilation:
 
-5)  Shoerwall accepts "nets=" in a multi-zone interface entry (one with
-    "-" in the ZONES column) in /etc/shorewall/interfaces.
+       WARNING: Your capabilities file is out of date -- it does not
+          contain all of the capabilities defined by Shorewall6 version
+          4.4.5.3
+
+       WARNING: Your capabilities file does not contain a Kernel
+          Version -- using 2.6.30
+
+    Corrected in 4.4.5.4.
+
+5)  The change in Shorewall 4.4.5.1 broke the 'forward' interface
+    option in Shorewall6.
+
+    Corrected in 4.4.5.4.
 
-    This problem was corrected in Shorewall 4.4.0.2.

Shorewall/lib.base

@@ -30,7 +30,7 @@
 #
 
 SHOREWALL_LIBVERSION=40000
-SHOREWALL_CAPVERSION=40310
+SHOREWALL_CAPVERSION=40406
 
 [ -n "${VARDIR:=/var/lib/shorewall}" ]
 [ -n "${SHAREDIR:=/usr/share/shorewall}" ]
@@ -220,7 +220,7 @@ reload_kernel_modules() {
 
     [ -z "$MODULESDIR" ] && \
 	uname=$(uname -r) && \
-	MODULESDIR=/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	MODULESDIR=/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
 
     MODULES=$(lsmod | cut -d ' ' -f1)
 
@@ -259,7 +259,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 
     [ -z "$MODULESDIR" ] && \
 	uname=$(uname -r) && \
-	MODULESDIR=/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	MODULESDIR=/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
 
     for directory in $(split $MODULESDIR); do
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
@@ -777,6 +777,13 @@ set_state () # $1 = state
 # Determine which optional facilities are supported by iptables/netfilter
 #
 determine_capabilities() {
+    [ -n "$IPTABLES" ] || IPTABLES=$(mywhich iptables)
+
+    if [ -z "$IPTABLES" ]; then
+	echo "   ERROR: No executable iptables binary can be found on your PATH" >&2
+	exit 1
+    fi
+
     qt $IPTABLES -t nat    -L -n && NAT_ENABLED=Yes    || NAT_ENABLED=
     qt $IPTABLES -t mangle -L -n && MANGLE_ENABLED=Yes || MANGLE_ENABLED=
 
@@ -820,14 +827,16 @@ determine_capabilities() {
     LOGMARK_TARGET=
     IPMARK_TARGET=
     LOG_TARGET=Yes
+    PERSISTENT_SNAT=
 
     chain=fooX$$
 
-    [ -n "$IPTABLES" ] || IPTABLES=$(mywhich iptables)
-
-    if [ -z "$IPTABLES" ]; then
-	echo "   ERROR: No executable iptables binary can be found on your PATH" >&2
-	exit 1
+    if [ -n "$NAT_ENABLED" ]; then
+	if qt $IPTABLES -t nat -N $chain; then
+	    qt $IPTABLES -t nat -A $chain -j SNAT --to-source 1.2.3.4 --persistent && PERSISTENT_SNAT=Yes
+	    qt $IPTABLES -t nat -F $chain
+	    qt $IPTABLES -t nat -X $chain
+	fi
     fi
 
     qt $IPTABLES -F $chain
@@ -936,7 +945,11 @@ determine_capabilities() {
     qt $IPTABLES -A $chain -m pkttype --pkt-type broadcast -j ACCEPT && USEPKTTYPE=Yes
     qt $IPTABLES -A $chain -m addrtype --src-type BROADCAST -j ACCEPT && ADDRTYPE=Yes
     qt $IPTABLES -A $chain -p tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1000:1500 -j ACCEPT && TCPMSS_MATCH=Yes
-    qt $IPTABLES -A $chain -m hashlimit --hashlimit 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && HASHLIMIT_MATCH=Yes
+    qt $IPTABLES -A $chain -m hashlimit --hashlimit-upto 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && HASHLIMIT_MATCH=Yes
+    if [ -z "$HASHLIMIT_MATCH" ]; then
+	qt $IPTABLES -A $chain -m hashlimit --hashlimit 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && NEW_HL_MATCH=Yes
+	HASHLIMIT_MATCH=$OLD_HL_MATCH
+    fi	
     qt $IPTABLES -A $chain -j NFQUEUE --queue-num 4 && NFQUEUE_TARGET=Yes
     qt $IPTABLES -A $chain -m realm --realm 4 && REALM_MATCH=Yes
     qt $IPTABLES -A $chain -m helper --helper "ftp" && HELPER_MATCH=Yes
@@ -952,6 +965,7 @@ determine_capabilities() {
     qt $IPTABLES -X $chain1
 
     CAPVERSION=$SHOREWALL_CAPVERSION
+    KERNELVERSION=$(printf "%d%02d%02d" $(uname -r 2> /dev/null | sed -e 's/-.*//' -e 's/^\([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*$/\1 \2 \3/g'))
 }
 
 report_capabilities() {
@@ -1002,6 +1016,7 @@ report_capabilities() {
 	report_capability "Address Type Match" $ADDRTYPE
 	report_capability "TCPMSS Match" $TCPMSS_MATCH
 	report_capability "Hashlimit Match" $HASHLIMIT_MATCH
+	report_capability "Old Hashlimit Match" $OLD_HL_MATCH
 	report_capability "NFQUEUE Target" $NFQUEUE_TARGET
 	report_capability "Realm Match" $REALM_MATCH
 	report_capability "Helper Match" $HELPER_MATCH
@@ -1011,6 +1026,7 @@ report_capabilities() {
 	report_capability "LOGMARK Target" $LOGMARK_TARGET
 	report_capability "IPMARK Target" $IPMARK_TARGET
 	report_capability "LOG Target" $LOG_TARGET
+	report_capability "Persistent SNAT" $PERSISTENT_SNAT
     fi
 
     [ -n "$PKTTYPE" ] || USEPKTTYPE=
@@ -1059,6 +1075,7 @@ report_capabilities1() {
     report_capability1 ADDRTYPE
     report_capability1 TCPMSS_MATCH
     report_capability1 HASHLIMIT_MATCH
+    report_capability1 OLD_HL_MATCH
     report_capability1 NFQUEUE_TARGET
     report_capability1 REALM_MATCH
     report_capability1 HELPER_MATCH
@@ -1068,8 +1085,10 @@ report_capabilities1() {
     report_capability1 LOGMARK_TARGET
     report_capability1 IPMARK_TARGET
     report_capability1 LOG_TARGET
+    report_capability1 PERSISTENT_SNAT
     
     echo CAPVERSION=$SHOREWALL_CAPVERSION
+    echo KERNELVERSION=$KERNELVERSION
 }
 
 # Function to truncate a string -- It uses 'cut -b -<n>'

Shorewall/lib.cli

@@ -430,6 +430,10 @@ show_command() {
 			    option=
 			    shift
 			    ;;
+			l*)
+			    IPT_OPTIONS1="--line-numbers"
+			    option=${option#l}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -443,11 +447,15 @@ show_command() {
 	esac
     done
 
+    IPT_OPTIONS="$IPT_OPTIONS $IPT_OPTIONS1"
+
     [ -n "$debugging" ] && set -x
     case "$1" in
 	connections)
 	    [ $# -gt 1 ] && usage 1
-	    echo "$PRODUCT $version Connections at $HOSTNAME - $(date)"
+	    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+	    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+	    echo "$PRODUCT $version Connections ($count out of $max) at $HOSTNAME - $(date)"
 	    echo
 	    [ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack
 	    ;;
@@ -560,6 +568,12 @@ show_command() {
 	vardir)
 	    echo $VARDIR;
 	    ;;
+	policies)
+	    [ $# -gt 1 ] && usage 1
+	    echo "$PRODUCT $version Policies at $HOSTNAME - $(date)"
+	    echo
+	    [ -f ${VARDIR}/policies ] && cat ${VARDIR}/policies;
+	    ;;
 	*)
 	    if [ "$PRODUCT" = Shorewall ]; then
 		case $1 in
@@ -673,6 +687,10 @@ dump_command() {
 			    SHOWMACS=Yes
 			    option=${option#m}
 			    ;;
+			l*)
+			    IPT_OPTIONS1="--line-numbers"
+			    option=${option#l}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -686,6 +704,8 @@ dump_command() {
 	esac
     done
 
+    IPT_OPTIONS="$IPT_OPTIONS $IPT_OPTIONS1"
+
     [ $VERBOSE -lt 2 ] && VERBOSE=2
 
     [ -n "$debugging" ] && set -x
@@ -710,7 +730,10 @@ dump_command() {
     heading "Raw Table"
     $IPTABLES -t raw -L $IPT_OPTIONS
 
-    heading "Conntrack Table"
+    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+
+    heading "Conntrack Table ($count out of $max)"
     [ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack
 
     heading "IP Configuration"

Shorewall/logrotate

@@ -0,0 +1,5 @@
+/var/log/shorewall-init.log {
+  missingok
+  notifempty
+  create 0600 root root
+}

Shorewall/releasenotes.txt

@@ -1,4 +1,4 @@
-Shorewall 4.4.0 patch release 1.
+Shorewall 4.4.5 Patch Release 4.
 
 ----------------------------------------------------------------------------
                R E L E A S E  4 . 4  H I G H L I G H T S
@@ -66,10 +66,9 @@ Shorewall 4.4.0 patch release 1.
        WARNING: SHOREWALL_COMPILER=shell ignored. Shorewall-shell
                 support has been removed in this release.
 
-    b) Review the incompatibilities between Shorewall-shell and
-       Shorewall-perl at
-       http://www.shorewall.net/Shorewall-perl.html#Incompatibilities
-       and make changes to your configuration as necessary.
+    b) Review the migration issues at
+       http://www.shorewall.net/LennyToSqueeze.html and make changes as
+       required.
 
     We strongly recommend that you migrate to Shorewall-perl on your
     current Shorewall version before upgrading to Shorewall 4.4.0. That
@@ -105,7 +104,7 @@ Shorewall 4.4.0 patch release 1.
              starts/restarts
 
     To avoid this warning, replace interface names by the corresponding
-    network addresses (e.g., 192.168.144.0/24).
+    network(s) in CIDR format (e.g., 192.168.144.0/24).
 
 6)  Previously, Shorewall has treated traffic shaping class IDs as
     decimal numbers (or pairs of decimal numbers). That worked fine
@@ -153,77 +152,148 @@ Shorewall 4.4.0 patch release 1.
 
 10) The name 'any' is now reserved and may not be used as a zone name.
 
-----------------------------------------------------------------------------
-        P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 0 . 2
-----------------------------------------------------------------------------
+11) Perl module initialization has changed in Shorewall
+    4.4.1. Previously, each Shorewall Perl package would initialize its
+    global variables for IPv4 in an INIT block. Then, if the
+    compilation turned out to be for IPv6,
+    Shorewall::Compiler::compiler() would reinitialize them for IPv6.
 
-1)  If MULTICAST=Yes in shorewall.conf, then multicast traffic was
-    excluded from ACCEPT policies.
+    Beginning in Shorewall 4.4.1, the modules do not initialize
+    themselves in an INIT block. So if you use Shorewall modules
+    outside of the Shorewall compilation environment, then you must
+    explicitly call the module's 'initialize' function after the module
+    has been loaded.
 
-2)  If a zone was defined with nets= in /etc/shorewall/zones, that
-    definition could not be extended by entries in
-    /etc/shorewall/hosts.
-
-3)  Previously, "nets=" could be specified in a multi-zone interface
-    definition ("-" in the ZONES column) in /etc/shorewall/zones. This
-    now raises a fatal compilation error.
-
- ----------------------------------------------------------------------------
-        P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 0 . 1
-----------------------------------------------------------------------------
-
-1)  If ULOG was specified as the LOG LEVEL in the all->all policy, the
-    rules at the end of the INPUT and OUTPUT chains still used the
-    LOG target rather than ULOG.
-
-2)  Use of CONTINUE policies with a nested IPSEC zone was broken in
-    some cases.
+12) Checking for zone membership has been tighened up. Previously, 
+    a zone could contain <interface>:0.0.0.0/0 along with other hosts;
+    now, if the zone has <interface>:0.0.0.0/0 (even with exclusions),
+    then it may have no additional members in /etc/shorewall/hosts.
 
 ----------------------------------------------------------------------------
-          P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 0
+        P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 5 . 4
 ----------------------------------------------------------------------------
 
-1)  When compiling to standard out, it is no longer necessary to
-    specify '-v-1' to suppress the 'Compiling...' progress message 
+1)  With Shorewall 4.4.5.3, using a capabilities file with Shorewall6
+    will result in the following warnings during compilation:
 
-2)  Previously, Shorewall would generate invalid iptables-restore input
-    if all of these conditions were met:
+       WARNING: Your capabilities file is out of date -- it does not
+          contain all of the capabilities defined by Shorewall6 version
+          4.4.5.3
 
-    - a nat rule (DNAT, REDIRECT, DNAT-, etc.) changed the destination
-      port number
-    - logging was specified on the rule
-    - no non-trivial exclusions in the rule (a non-trivial exclusion is
-      one whose exclusion list has more than one element)
+       WARNING: Your capabilities file does not contain a Kernel
+          Version -- using 2.6.30
 
-    Example of rule:
+2)  The change in Shoreawll 4.4.5.1 broke the 'forward' interface
+    option in Shorewall6.
 
-    	    REDIRECT:ULOG   wall    82      tcp     80
+----------------------------------------------------------------------------
+        P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 5 . 3
+----------------------------------------------------------------------------
 
-    Example of error message:
+1)  'shorewall6 start' on Shorewall 4.4.5.2 generates a Perl run-time
+    error. Also, handling of ROUTE_FILTER on kernel 2.6.31 and later
+    was broken.
 
-       iptables v1.3.5: Need TCP or UDP with port specification
-        Try `iptables -h' or 'iptables --help' for more information.
-	ERROR: Command "/sbin/iptables -A log0 -j REDIRECT --to-port
-        82" Failed
+----------------------------------------------------------------------------
+        P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 5 . 2
+----------------------------------------------------------------------------
 
-3)  Previously, log displays from the 'dump', 'show log' and 'logwatch'
-    commands did not properly suppress redundant fields in the records
-    (host name, and leading constant part of the LOGPREFIX).
+1)  When using an up-to-date capabilities file with Shorewall 4.4.5.1, the
+    following warning messages were issued.
 
-4)  Given that Jozsef Kadlecsik has not yet released ipset 3.1, ipset
-    bindings are once again supported.
+       WARNING: Unknown capability (KERNELVERSION) 
+         ignored : /etc/shorewall2/capabilities (line 49)
+       WARNING: Your capabilities file does not contain a Kernel Version --
+         using 2.6.30
 
-5)  The 'upnpclient' option only worked correctly if 'optional' was
-    also specified for the interface.
+----------------------------------------------------------------------------
+        P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 5 . 1
+----------------------------------------------------------------------------
 
-6)  Where more than one internet provider shares the same external
-    interface, specifying the provider by number in /etc/shorewall/masq
-    (e.g., eth1(2)) resulted in the fatal compilation error:
+1)  In kernel 2.6.31, the handling of the rp_filter interface option was
+    changed incompatibly. Previously, the effective value was determined
+    by the setting of net.ipv4.config.dev.rp_filter logically ANDed with
+    the setting of net.ipv4.config.all.rp_filter.
 
-    	   ERROR: 2 is not a shared-interface provider
+    Beginning with kernel 2.6.31, the value is the arithmetic MAX of
+    those two values. 
 
-    Also, the shorewall-masq (5) man page did not describe the syntax
-    for specifying the provider.
+    Given that Shorewall sets net.ipv4.config.all.rp_filter to 1 if
+    there are any interfaces specifying 'routefilter', specifying
+    'routefilter' on any interface has the effect of setting the option
+    on all interfaces.
+
+    To allow Shorewall to handle this issue, a number of changes were
+    necessary:
+
+    a)  There is no way to safely determine if a kernel supports the
+        new semantics or the old so the Shorewall compiler uses the
+        kernel version reported by uname.
+
+    b)  This means that the kernel version is now recorded in
+        the capabilities file. So if you use capabilities files, you
+        need to regenerate the files with Shorewall[-lite] 4.4.5.1.
+
+    c)  If the capabilities file does not contain a kernel version,
+        the compiler assumes version 2.6.30 (the old rp_filter
+        behavior).
+
+    d)  The ROUTE_FILTER option in shorewall.conf now accepts the
+    	following values:
+
+	0 or No  - Shorewall sets net.ipv4.config.all.rp_filter to 0.
+	1 or Yes - Shorewall sets net.ipv4.config.all.rp_filter to 1.
+	2        - Shorewall sets net.ipv4.config.all.rp_filter to 2.
+	Keep	 - Shorewall does not change the setting of
+	           net.ipv4.config.all.rp_filter if the kernel version
+		   is 2.6.31 or later.
+        
+	The default remains Keep.
+
+    e)  The 'routefilter' interface option can have values 0,1 or 2. If
+    	'routefilter' is specified without a value, the value 1 is
+    	assumed. 
+
+----------------------------------------------------------------------------
+          P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 5
+----------------------------------------------------------------------------
+
+1)  The change which removed the 15 port limitation on
+    /etc/shorewall/routestopped was incomplete. The result was that if
+    more than 15 ports were listed, an error was generated.
+
+2)  If any interfaces had the 'bridge' option specified, compilation
+    failed with the error:
+
+    Undefined subroutine &Shorewall::Rules::match_source_interface called 
+    at /usr/share/shorewall/Shorewall/Rules.pm line 2319.
+
+3)  The compiler now flags port number 0 as an error in all
+    contexts. Previously, port 0 was allowed with the result that
+    invalid iptables-restore input could be generated in some cases.
+
+4)  The 'show policies' command now works in Shorewall6 and
+    Shorewall6-lite.
+
+5)  Traffic shaping modules from /lib/modules/<version>/net/sched/ are
+    now correctly loaded. Previously, that directory was not
+    searched. Additionally, Shorewall6 now tries to load the cls_flow
+    module; previously, only Shorewall attempts to load that module.
+
+6)  The Shorewall6-lite shorecap program was previously including the
+    IPv4 base library rather than the IPv6 version. Also, Shorewall6
+    capability detection was determing the availablity of the mangle
+    capability before it had determined if ip6tables was installed.
+
+7)  The setting of MODULE_SUFFIX was previously ignored except when
+    compiling for export.
+
+8)  Detection of the Enhanced Reject capability in the compiler was
+    broken for IPv4 compilations.
+
+9)  The 'reload -c' command would ignore the setting of DONT_LOAD in
+    shorewall.conf. The 'reload' command without '-c' worked as
+    expected. 
 
 ----------------------------------------------------------------------------
              K N O W N   P R O B L E M S   R E M A I N I N G
@@ -232,7 +302,40 @@ Shorewall 4.4.0 patch release 1.
 None.
 
 ----------------------------------------------------------------------------
-                 N E W   F E A T U R E S   IN   4 . 4
+                N E W   F E A T U R E S   I N   4 . 4 . 5
+----------------------------------------------------------------------------
+
+1)  Shorewall now allows DNAT rules that change only the destination
+    port.
+
+    Example:
+
+	DNAT	loc	net::456	udp	234
+
+    That rule will modify the destination port in UDP packets received
+    from the 'loc' zone from 456 to 234. Note that if the destination
+    is the firewall itself, then the destination port will be rewritten
+    but that no ACCEPT rule from the loc zone to the $FW zone will have
+    been created to handle the request. So such rules should probably
+    exclude the firewall's IP addresses in the ORIGINAL DEST column.
+
+2)  Systems that do not log Netfilter messages locally can now set
+    LOGFILE=/dev/null in shorewall.conf.
+
+3)  The 'shorewall show connections' and 'shorewall dump' commands now
+    display the current number of connections and the max supported
+    connections.
+
+    Example:
+
+	shorewall show connections
+    	Shorewall 4.5.0 Connections (62 out of 65536) at gateway - Sat ...
+
+    In that case, there were 62 current connections out of a maximum
+    number supported of 65536.
+
+----------------------------------------------------------------------------
+                N E W   F E A T U R E S   I N   4 . 4 . 0
 ----------------------------------------------------------------------------
 
 1)  The Shorewall packaging has been completely revamped in Shorewall
@@ -241,7 +344,7 @@ None.
     The new packages are:
 
     - Shorewall.   Includes the former Shorewall-common and
-                   Shorewall-perl packages. Has everything needed
+                   Shorewall-perl packages. Includes everything needed
                    to create an IPv4 firewall.
 
 		   Shorewall-shell is no longer available.
@@ -880,3 +983,472 @@ None.
     the iptables utility is discovered using the PATH setting, then
     ip6tables in the same directory as the discovered iptables will be
     used.
+
+28) A 'flow=<keys>' option has been added to the
+    /etc/shorewall/tcclasses OPTIONS column.
+
+    Shorewall attaches an SFQ queuing discipline to each leaf HTB
+    and HFSC class. SFQ ensures that each flow gets equal access to the
+    interface. The default definition of a flow corresponds roughly to
+    a Netfilter connection. So if one internal system is running
+    BitTorrent, for example, it can have lots of 'flows' and can thus
+    take up a larger share of the bandwidth than a system having only a
+    single active connection. The flow classifier (module cls_flow)
+    works around this by letting you define what a 'flow' is.
+
+    The clasifier must be used carefully or it can block off all
+    traffic on an interface!
+
+    The flow option can be specified for an HTB or HFSC leaf class (one
+    that has no sub-classes). We recommend that you use the following:
+
+    	Shaping internet-bound traffic: flow=nfct-src
+	Shaping traffic bound for your local net: flow=dst
+
+    These will cause a 'flow' to consists of the traffic to/from each
+    internal system.
+
+    When more than one key is give, they must be enclosed in
+    parenthesis and separated by commas.
+
+    To see a list of the possible flow keys, run this command:
+
+       tc filter add flow help
+
+    Those that begin with "nfct-" are Netfilter connection tracking
+    fields. As shown above, we recommend flow=nfct-src; that means that
+    we want to use the source IP address before SNAT as the key.
+
+    Note: Shorewall cannot determine ahead of time if the flow
+    classifier is available in your kernel (especially if it was built
+    into the kernel as opposed to being loaded as a
+    module). Consequently, you should check ahead of time to ensure
+    that both your kernel and 'tc' utility support the feature.
+
+    You can test the 'tc' utility by typing (as root):
+
+    	tc filter add flow help
+
+    If flow is supported, you will see:
+
+       Usage: ... flow ...
+
+       	      [mapping mode]: map key KEY [ OPS ] ...
+ 	      [hashing mode]: hash keys KEY-LIST ...
+
+       ...
+
+    If flow is not supported, you will see:
+
+       Unknown filter "flow", hence option "help" is unparsable
+    
+    If your kernel supports module autoloading, just type (as root):
+
+       modprobe cls_flow
+
+    If 'flow' is supported, no output is produced; otherwise, you will
+    see:
+
+       FATAL: Module cls_flow not found.
+    
+    If your kernel is not modularized or does not support module
+     autoloading, look at your kernel configuration (either
+    /proc/config.gz or the .config file in
+    /lib/modules/<kernel-version>/build/
+
+    If 'flow' is supported, you will see:
+
+       NET_CLS_FLOW=m 
+
+    or
+
+       NET_CLS_FLOW=y
+
+    For modularized kernels, Shorewall will attempt to load
+    /lib/modules/<kernel-version>/net/sched/cls_flow.ko by default.
+       
+----------------------------------------------------------------------------
+          P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 1
+----------------------------------------------------------------------------
+
+1)  If ULOG was specified as the LOG LEVEL in the all->all policy, the
+    rules at the end of the INPUT and OUTPUT chains would still use the
+    LOG target rather than ULOG.
+
+2)  Using CONTINUE policies with a nested IPSEC zone was still broken
+    in some cases.
+
+3)  The setting of IP_FORWARDING has been change to Off in the
+    one-interface sample configuration since forwarding is typically
+    not required with only a single interface.
+
+4)  If MULTICAST=Yes in shorewall.conf, multicast traffic was
+    incorrectly exempted from ACCEPT policies.
+
+5)  Previously, the definition of a zone that specified "nets=" in
+    /etc/shorewall/interfaces could not be extended by entries in
+    /etc/shorewall/hosts.
+
+6)  Previously, "nets=" could be specified in a multi-zone interface
+    definition ("-" in the ZONES column) in /etc/shorewall/zones. This
+    now raises a fatal compilation error.
+
+7)  MULTICAST=Yes generates an incorrect rule that limits its
+    effectiveness to a small part of the multicast address space.
+
+8)  Checking for zone membership has been tighened up. Previously, 
+    a zone could contain <interface>:0.0.0.0/0 along with other hosts;
+    now, if the zone has <interface>:0.0.0.0/0 (even with exclusions),
+    then it may have no additional members in /etc/shorewall/hosts.
+
+----------------------------------------------------------------------------
+                N E W   F E A T U R E S   I N   4 . 4 . 1
+----------------------------------------------------------------------------
+
+1)  To replace the SAME keyword in /etc/shorewall/masq, support has
+    been added for 'persistent' SNAT. Persistent SNAT is required when
+    an address range is specified in the ADDRESS column and when you
+    want a client to always receive the same source/destination IP
+    pair. It replaces SAME: which was removed in Shorewall 4.4.0.
+
+    To specify persistence, follow the address range with
+    ":persistent".
+
+    Example:
+
+    #INTERFACE	SOURCE	   ADDRESS
+    eth0	0.0.0.0/0  206.124.146.177-206.124.146.179:persistent
+
+    This feature requires Persistent SNAT support in your kernel and
+    iptables. 
+
+    If you use a capabilities file, you will need to create a new one
+    as a result of this feature.
+
+    WARNING: Linux kernels beginning with 2.6.29 include persistent
+    SNAT support. If your iptables supports persistent SNAT but your
+    kernel does not, there is no way for Shorewall to determine that
+    persistent SNAT isn't going to work. The kernel SNAT code blindly
+    accepts all SNAT flags without verifying them and returns them to
+    iptables when asked.
+
+2)  A 'clean' target has been added to the Makefiles. It removes backup
+    files (*~ and .*~). 
+
+3)  The meaning of 'full' has been redefined when used in the context
+    of a traffic shaping sub-class. Previously, 'full' always meant the
+    OUT-BANDWIDTH of the device. In the case of a sub-class, however,
+    that definition is awkward to use because the sub-class is limited
+    by the parent class.
+
+    Beginning with this release, 'full' in a sub-class definition
+    refers to the specified rate defined for the parent class. So
+    'full' used in the RATE column refers to the parent class's RATE;
+    when used in the CEIL column, 'full' refers to the parent class's
+    CEIL.
+
+    As part of this change, the compiler now issues a warning if the
+    sum of the top-level classes' RATEs exceeds the OUT-BANDWIDTH of
+    the device. Similarly, a warning is issued if the sum of the RATEs
+    of a class's sub-classes exceeds the rate of the CLASS.
+
+4)  When 'nets=<network>' or 'nets=(<net1>,<net2>,...) is specified in
+    /etc/shorewall/interfaces, multicast traffic will now be sent to
+    the zone along with limited broadcasts.
+
+5)  A flaw in the parsing logic for the zones file allowed most zone
+    types containing the character string 'ip' to be accepted as a
+    synonym for 'ipv4' (or ipv6 if compiling an IPv6 configuration).
+
+----------------------------------------------------------------------------
+          P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 2
+----------------------------------------------------------------------------
+
+1)  Detection of Persistent SNAT was broken in the rules compiler. 
+
+2)  Initialization of the compiler's chain table was occurring before 
+    shorewall.conf had been read and before the capabilities had been
+    determined. This could lead to incorrect rules and Perl runtime
+    errors.
+
+3)  The 'shorewall check' command previously did not detect errors in
+    /etc/shorewall/routestopped.
+
+4)  In earlier versions, if a file with the same name as a built-in
+    action were present in the CONFIG_PATH, then the compiler would
+    process that file like it was an extension script.
+
+    The compiler now ignores the presence of such files.
+
+5)  Several configuration issues which previously produced an error or
+    warning are now handled differently.
+
+    a)  MAPOLDACTIONS=Yes and MAPOLDACTIONS= in shorewall.conf are now
+        handled as they were by the old shell-based compiler. That is,
+        they cause pre-3.0 built-in actions to be mapped automatically
+        to the corresponding macro invocation.
+
+    b)  SAVE_IPSETS=Yes no longer produces a fatal error -- it is now a
+        warning.
+
+    c)  DYNAMIC_ZONES=Yes no longer produces a fatal error -- it is now
+        a warning.
+
+    d)  RFC1918_STRICT=Yes no longer produces a fatal error -- it is now
+        a warning.
+
+6)  Previously, it was not possible to specify an IP address range in
+    the ADDRESS column of /etc/shorewall/masq. Thanks go to Jessee
+    Shrieve for the patch.
+
+7)  The 'wait4ifup' script included for Debian compatibility now runs
+    correctly with no PATH.
+
+8)  The new per-IP LIMIT feature now works with ancient iptables
+    releases (e.g., 1.3.5 as found on RHEL 5). This change required
+    testing for an additional capability which means that those who use
+    a capabilities file should regenerate that file after installing
+    4.4.2.
+
+9)  One unintended difference between Shorewall-shell and
+    Shorewall-perl was that Shorewall-perl did not support the MARK
+    column in action bodies. This has been corrected.
+
+----------------------------------------------------------------------------
+                N E W   F E A T U R E S   I N   4 . 4 . 2
+----------------------------------------------------------------------------
+
+1)  Prior to this release, line continuation has taken precedence over 
+    #-style comments. This prevented us from doing the following:
+
+    	    ACCEPT    net:206.124.146.176,\   #Gateway
+	    	          206.124.146.177,\   #Mail
+			  206.124.146.178\    #Server
+			  		      ...
+    
+    Now, unless a line ends with '\', any trailing comment is stripped
+    off (including any white-space preceding the '#'). Then if the line
+    ends with '\', it is treated as a continuation line as normal.
+
+2)  Three new columns have been added to FORMAT-2 macro bodies.
+
+    	  MARK
+	  CONNLIMIT
+	  TIME
+
+    These three columns correspond to the similar columns in
+    /etc/shorewall/rules and must be empty in macros invoked from an
+    action.
+
+3)  Accounting chains may now have extension scripts. Simply place your
+    Perl script in the file /etc/shorewall/<chain> and when the
+    accounting chain named <chain> is created, your script will be
+    invoked.
+
+    As usual, the variable $chainref will contain a reference to the
+    chain's table entry.
+
+----------------------------------------------------------------------------
+          P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 3
+----------------------------------------------------------------------------
+
+1.  Previously, if 'routeback' was specified in /etc/shorewall/routestopped:
+
+    a) 'shorewall check' produced an internal error
+    b) The 'routeback' option didn't work
+
+2)  If an alias IP address was added and RETAIN_ALIASES=No in
+    shorewall.conf, then a compiler internal error resulted.
+
+3)  Previously, the generated script would try to detect the values
+    for all run-time variables (such as IP addresses), regardless of
+    what command was being executed. Now, this information is only
+    detected when it is needed.
+
+4)  Nested zones where the parent zone was defined by a wildcard
+    interface (name ends with +) in /etc/shorewall/interfaces did
+    not work correctly in some cases.
+
+5)  IPv4 addresses embedded in IPv6 (e.g., ::192.168.1.5) were
+    incorrectly reported as invalid.
+
+6)  Under certain circumstances, optional providers were not detected
+    as being usable.
+
+    Additionally, the messages issued when an optional provider was not
+    usable were confusing; the message intended to be issued when the
+    provider shared an interface ("WARNING: Gateway <gateway> is not
+    reachable -- Provider <name> (<number>) not Added") was being
+    issued when the provider did not share an interface. Similarly, the
+    message intended to be issued when the provider did not share an
+    interface ("WARNING: Interface <interface> is not usable --
+    Provider <name> (<number>) not Added") was being issued when the
+    provider did share an interface.
+
+----------------------------------------------------------------------------
+                N E W   F E A T U R E S   I N   4 . 4 . 3
+----------------------------------------------------------------------------
+
+1)  On Debian systems, a default installation will now set
+    INITLOG=/dev/null in /etc/default/shorewall. In all configurations,
+    the default values for the log variables are changed to:
+
+    	STARTUP_LOG=/var/log/shorewall-init.log
+	LOG_VERBOSITY=2
+
+    The effect is much the same as the old defaults, with the exception 
+    that:
+
+	a) Start, stop, etc. commands issued through /sbin/shorewall
+	   will be logged.
+	b) Logging will occur at maximum verbosity.
+	c) Log entries will be date/time stamped.
+
+    On non-Debian systems, new installs will now log all Shorewall 
+    commands to /var/log/shorewall-init.log.
+
+2)  A new TRACK_PROVIDERS option has been added in shorewall.conf.
+    The value of this option becomes the default for the 'track'
+    provider option in /etc/shorewall/providers.
+
+3)  A new 'limit' option has been added to
+    /etc/shorewall/tcclasses. This option specifies the number of
+    packets that are allowed to be queued within the class. Packets
+    exceeding this limit are dropped. The default value is 127 which is
+    the value that earlier versions of Shorewall used.  The option is
+    ignored with a warning if the 'pfifo' option has been specified.
+----------------------------------------------------------------------------
+          P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 4
+----------------------------------------------------------------------------
+
+1)  In some simple one-interface configurations, the following Perl
+    run-time error messages were issued:
+
+      Generating Rule Matrix...
+      Use of uninitialized value in concatenation (.) or string at
+      /usr/share/shorewall/Shorewall/Chains.pm line 649.
+      Use of uninitialized value in concatenation (.) or string at
+      /usr/share/shorewall/Shorewall/Chains.pm line 649.
+      Creating iptables-restore input...
+
+2)  The Shorewall operations log (specified by STARTUP_LOG) is now
+    secured 0600.
+
+3)  Previously, the compiler generated an incorrect test for interface
+    availability in the generated code for adding route rules. The
+    result was that the rules were always added, regardless of the
+    state of the provider's interface. Now, the rules are only added
+    when the interface is available.
+
+4)  When TC_WIDE_MARKS=Yes and class numbers are not explicitly
+    specified in /etc/shorewall/tcclasses, duplicate class numbers
+    result. A typical error message is:
+
+    	    ERROR: Command "tc class add dev eth3 parent 1:1 classid
+    	    1:1 htb rate 1024kbit ceil 100000kbit prio 1 quantum 1500"
+    	    Failed
+
+    Note that the class ID of the class being added is a duplicate of
+    the parent's class ID.
+
+    Also, when TC_WIDE_MARKS=Yes, values > 255 in the MARK column of
+    /etc/shorewall/tcclasses were rejected.
+
+----------------------------------------------------------------------------
+                N E W   F E A T U R E S   I N   4 . 4 . 4
+----------------------------------------------------------------------------
+
+1)  The Shorewall packages now include a logrotate configuration file.
+
+2)  The limit of 15 entries in a port list has been relaxed in
+    /etc/shorewall/routestopped.
+
+3)  The following seemingly valid configuration produces a fatal
+    error reporting "Duplicate interface name (p+)"
+
+    /etc/shorewall/zones:
+
+       #ZONE		TYPE	
+       fw		firewall
+       world		ipv4
+       z1:world		bport4
+       z2:world		bport4
+
+    /etc/shorewall/interfaces:
+
+       #ZONE		INTERFACE	BROADCAST	OPTIONS
+       world		br0		-		bridge
+       world		br1		-		bridge
+       z1		br0:p+
+       z2		br1:p+
+
+    This error occurs because the Shorewall implementation requires
+    that each bridge port must have a unique name.
+
+    To work around this problem, a new 'physical' interface option has
+    been created. The above configuration may be defined using the
+    following in /etc/shorewall/interfaces:
+
+       #ZONE		INTERFACE	BROADCAST	OPTIONS
+       world		br0		-		bridge
+       world		br1		-		bridge
+       z1		br0:x+		-		physical=p+
+       z2		br1:y+		-		physical=p+
+
+    In this configuration, 'x+' is the logical name for ports p+ on
+    bridge br0 while 'y+' is the logical name for ports p+ on bridge
+    br1.
+
+    If you need to refer to a particular port on br1 (for example
+    p1023), you write it as y1023; Shorewall will translate that name
+    to p1023 when needed.
+
+    It is allowed to have a physical name ending in '+' with a logical
+    name that does not end with '+'. The reverse is not allowed; if the
+    logical name ends in '+' then the physical name must also end in
+    '+'.
+
+    This feature is not restricted to bridge ports. Beginning with this
+    release, the interface name in the INTERFACE column can be
+    considered a logical name for the interface, and the actual
+    interface name is specified using the 'physical' option. If no
+    'physical' option is present, then the physical name is assumed to
+    be the same as the logical name. As before, the logical interface
+    name is used throughout the rest of the configuration to refer to
+    the interface.
+
+4)  Previously, Shorewall has used the character '2' to form the name
+    of chains involving zones and/or the word 'all' (e.g., fw2net,
+    all2all). When zones names are given numeric suffixes, these
+    generated names are hard to read (e.g., foo1232bar). To make these
+    names clearer, a ZONE2ZONE option has been added.
+
+    ZONE2ZONE has a default value of "2" but can also be given the
+    value "-" (e.g., ZONE2ZONE="-") which causes Shorewall to separate
+    the two parts of the name with a hyphen (e.g., foo123-bar).
+
+5)  Only one instance of the following warning is now generated;
+    previously, one instance of a similar warning was generated for
+    each COMMENT encountered.
+
+	COMMENTs ignored -- require comment support in iptables/Netfilter
+
+6)  The shorewall and shorewall6 utilities now support a 'show
+    policies' command. Once Shorewall or Shorewall6 has been restarted
+    using a script generated by this version, the 'show policies'
+    command will list each pair of zones and give the applicable
+    policy. If the policy is enforced in a chain, the name of the chain
+    is given.
+
+    Example:
+
+	net 	=>	loc	DROP using chain net2all
+
+    Note that implicit intrazone ACCEPT policies are not displayed for
+    zones associated with a single network where that network
+    doesn't specify 'routeback'.
+
+7)  The 'show' and 'dump' commands now support an '-l' option which
+    causes chain displays to include the rule number of each rule.
+
+    (Type 'iptables -h' and look for '--line-number')

Shorewall/shorewall

@@ -23,99 +23,9 @@
 #	along with this program; if not, write to the Free Software
 #	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#	If an error occurs while starting or restarting the firewall, the
-#	firewall is automatically stopped.
+#       For a list of supported commands, type 'shorewall help'
 #
-#	The firewall uses configuration files in /etc/shorewall/ - skeleton
-#	files are included with the firewall.
-#
-#	Commands are:
-#
-#          shorewall add <iface>[:<host>] zone     Adds a host or subnet to a zone
-#          shorewall delete <iface>[:<host>] zone  Deletes a host or subnet from a zone
-#          shorewall dump                          Dumps all Shorewall-related information
-#                                                  for problem analysis
-#	   shorewall start 			   Starts the firewall
-#	   shorewall restart			   Restarts the firewall
-#	   shorewall stop			   Stops the firewall
-#	   shorewall status			   Displays firewall status
-#	   shorewall reset			   Resets iptables packet and
-#						   byte counts
-#	   shorewall clear			   Open the floodgates by
-#						   removing all iptables rules
-#						   and setting the three permanent
-#						   chain policies to ACCEPT
-#	   shorewall refresh			   Rebuild the common chain to
-#						   compensate for a change of
-#						   broadcast address on any "detect"
-#						   interface.
-#	   shorewall [re]load [ <directory> ] <system>
-#						   Compile a script and install it on a
-#						   remote Shorewall Lite system.
-#	   shorewall show <chain> [ <chain> ... ]  Display the rules in each <chain> listed
-#          shorewall show actions                  Displays the available actions
-#	   shorewall show log			   Print the last 20 log messages
-#	   shorewall show connections		   Show the kernel's connection
-#						   tracking table
-#	   shorewall show nat			   Display the rules in the nat table
-#	   shorewall show {mangle|tos}		   Display the rules in the mangle table
-#	   shorewall show tc			   Display traffic control info
-#	   shorewall show classifiers		   Display classifiers
-#          shorewall show capabilities             Display iptables/kernel capabilities
-#          shorewall show vardir                   Display the VARDIR setting.
-#	   shorewall version			   Display the installed version id
-#	   shorewall check [ -e ] [ <directory> ]  Dry-run compilation.
-#	   shorewall try <directory> [ <timeout> ] Try a new configuration and if
-#						   it doesn't work, revert to the
-#						   standard one. If a timeout is supplied
-#						   the command reverts back to the
-#						   standard configuration after that many
-#						   seconds have elapsed after successfully
-#						   starting the new configuration.
-#	   shorewall logwatch [ refresh-interval ] Monitor the local log for Shorewall
-#						   messages.
-#	   shorewall drop <address> ...		   Temporarily drop all packets from the
-#						   listed address(es)
-#	   shorewall reject <address> ...	   Temporarily reject all packets from the
-#						   listed address(es)
-#	   shorewall allow <address> ...	   Reenable address(es) previously
-#						   disabled with "drop" or "reject"
-#	   shorewall save [ <file> ]		   Save the list of "rejected" and
-#						   "dropped" addresses so that it will
-#						   be automatically reinstated the
-#						   next time that Shorewall starts.
-#                                                  Save the current state so that 'shorewall
-#                                                  restore' can be used.
-#
-#          shorewall forget [ <file> ]             Discard the data saved by 'shorewall save'
-#
-#          shorewall restore [ <file> ]            Restore the state of the firewall from
-#                                                  previously saved information.
-#
-#          shorewall ipaddr { <address>/<cidr> | <address> <netmask> }
-#
-#                                                  Displays information about the network
-#                                                  defined by the argument[s]
-#
-#          shorewall iprange <address>-<address>   Decomposes a range of IP addresses into
-#                                                  a list of network/host addresses.
-#
-#          shorewall ipdecimal { <address> | <integer> }
-#
-#                                                  Displays the decimal equivalent of an IP
-#                                                  address and vice versa.
-#
-#          shorewall safe-start [ <directory> ]    Starts the firewall and promtp for a c
-#                                                  confirmation to accept or reject the new
-#                                                  configuration
-#
-#          shorewall safe-restart [ <directory> ]  Restarts the firewall and prompt for a
-#                                                  confirmation to accept or reject the new
-#                                                  configuration
-#
-#          shorewall compile [ -e ] [ <directory> ] <filename>
-#                                                  Compile a firewall program file.
-
+#####################################################################################################
 #
 # Set the configuration variables from shorewall.conf
 #
@@ -123,7 +33,6 @@
 #     $2 = Yes: check for STARTUP_ENABLED
 #     $3 = Yes: Check for LOGFILE
 #     
-#
 get_config() {
     local prog
 
@@ -164,7 +73,7 @@ get_config() {
 
 	    if [ -n "$(syslog_circular_buffer)" ]; then
 		LOGREAD="logread | tac"
-	    elif [ -f $LOGFILE ]; then
+	    elif [ -r $LOGFILE ]; then
 		LOGREAD="tac $LOGFILE"
 	    else
 		echo "LOGFILE ($LOGFILE) does not exist!" >&2
@@ -275,7 +184,7 @@ get_config() {
 		    ;;
 		*)
 		    if [ -n "$STARTUP_ENABLED" ]; then
-			echo "   ERROR: Invalid Value for STARTUP_ENABLE: $STARTUP_ENABLED" >&2
+			echo "   ERROR: Invalid Value for STARTUP_ENABLED: $STARTUP_ENABLED" >&2
 			exit 2
 		    fi
 		    ;;
@@ -1062,7 +971,7 @@ safe_commands() {
 
     [ -n "$nolock" ] || mutex_on
 
-    if ${VARDIR}/.$command $command; then
+    if ${VARDIR}/.$command $debugging $command; then
 
 	echo -n "Do you want to accept the new firewall configuration? [y/n] "
 
@@ -1322,8 +1231,10 @@ reload_command() # $* = original arguments less the command.
 	    ensure_config_path
 	fi
 
+	[ -n "$DONT_LOAD" ] && DONT_LOAD="$(echo $DONT_LOAD | tr ',' ' ')"
+
 	progress_message "Getting Capabilities on system $system..."
-	if ! rsh_command "MODULESDIR=$MODULESDIR MODULE_SUFFIX=\"$MODULE_SUFFIX\" IPTABLES=$IPTABLES /usr/share/shorewall-lite/shorecap" > $directory/capabilities; then
+	if ! rsh_command "MODULESDIR=$MODULESDIR MODULE_SUFFIX=\"$MODULE_SUFFIX\" IPTABLES=$IPTABLES DONT_LOAD=\"$DONT_LOAD\" /usr/share/shorewall-lite/shorecap" > $directory/capabilities; then
 	    fatal_error "ERROR: Capturing capabilities on system $system failed"
 	fi
     fi
@@ -1478,6 +1389,7 @@ usage() # $1 = exit status
     echo "   show [ -m ] log"
     echo "   show macros"
     echo "   show [ -x ] mangle|nat|raw|routing"
+    echo "   show policies"
     echo "   show tc"
     echo "   show vardir"
     echo "   show zones"

Shorewall/shorewall.spec

@@ -1,6 +1,6 @@
 %define name shorewall
-%define version 4.4.0
-%define release 2
+%define version 4.4.5
+%define release 4
 
 Summary: Shoreline Firewall is an iptables-based firewall for Linux systems.
 Name: %{name}
@@ -77,6 +77,8 @@ fi
 %attr(0644,root,root) %config(noreplace) /etc/shorewall/*
 %attr(0600,root,root) /etc/shorewall/Makefile
 
+%attr(0644,root,root) /etc/logrotate.d/shorewall
+
 %attr(0755,root,root) /sbin/shorewall
 
 %attr(0644,root,root) /usr/share/shorewall/version
@@ -104,10 +106,32 @@ fi
 %doc COPYING INSTALL changelog.txt releasenotes.txt Contrib/* Samples 
 
 %changelog
-* Fri Aug 28 2009 Tom Eastep tom@shorewall.net
-- Updated to 4.4.0-2
-* Thu Aug 13 2009 Tom Eastep tom@shorewall.net
-- Updated to 4.4.0-1
+* Thu Dec 24 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-4
+* Thu Dec 24 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-4
+* Mon Dec 21 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-3
+* Sun Dec 20 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-2
+* Sat Dec 19 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-1
+* Fri Nov 27 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-0base
+* Sat Nov 21 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0base
+* Fri Nov 13 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0Beta2
+* Wed Nov 11 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0Beta1
+* Tue Nov 03 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.3-0base
+* Sun Sep 06 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.2-0base
+* Fri Sep 04 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.2-0base
+* Fri Aug 14 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.1-0base
 * Sun Aug 09 2009 Tom Eastep tom@shorewall.net
 - Made Perl a dependency
 * Mon Aug 03 2009 Tom Eastep tom@shorewall.net

Shorewall/uninstall.sh

@@ -26,7 +26,7 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {

Shorewall/wait4ifup

@@ -33,7 +33,7 @@
 #
 
 interface_is_up() {
-    [ -n "$(ip link list dev $1 2> /dev/null | grep -e '[<,]UP[,>]')" ] 
+    [ -n "$(/sbin/ip link list dev $1 2> /dev/null | /bin/grep -e '[<,]UP[,>]')" ] 
 }
 
 case $# in
@@ -51,7 +51,7 @@ esac
 
 while [ $timeout -gt 0 ]; do
     interface_is_up $1 && exit 0
-    sleep 1
+    /bin/sleep 1
     timeout=$(( $timeout - 1 ))
 done
 

Shorewall6-lite/default.debian

@@ -21,4 +21,9 @@ startup=0
 
 OPTIONS=""
 
+#
+# Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf
+#
+INITLOG=/dev/null
+
 # EOF

Shorewall6-lite/fallback.sh

@@ -28,7 +28,7 @@
 #       shown below. Simply run this script to revert to your prior version of
 #       Shoreline Firewall.
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {

Shorewall6-lite/init.debian.sh

@@ -15,9 +15,7 @@
 
 SRWL=/sbin/shorewall6-lite
 SRWL_OPTS="-tvv"
-# Note, set INITLOG to /dev/null if you do not want to
-# keep logs of the firewall (not recommended)
-INITLOG=/var/log/shorewall6-lite-init.log
+test -n ${INITLOG:=/var/log/shorewall6-lite-init.log}
 
 [ "$INITLOG" eq "/dev/null" && SHOREWALL_INIT_SCRIPT=1 || SHOREWALL_INIT_SCRIPT=0
 
@@ -25,7 +23,7 @@ export SHOREWALL_INIT_SCRIPT
 
 test -x $SRWL || exit 0
 test -x $WAIT_FOR_IFUP || exit 0
-test -n $INITLOG || {
+test -n "$INITLOG" || {
 	echo "INITLOG cannot be empty, please configure $0" ; 
 	exit 1;
 }

Shorewall6-lite/install.sh

@@ -22,7 +22,7 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {
@@ -219,6 +219,11 @@ mkdir -p ${PREFIX}/var/lib/shorewall6-lite
 chmod 755 ${PREFIX}/etc/shorewall6-lite
 chmod 755 ${PREFIX}/usr/share/shorewall6-lite
 
+if [ -n "$PREFIX" ]; then
+    mkdir -p ${PREFIX}/etc/logrotate.d
+    chmod 755 ${PREFIX}/etc/logrotate.d
+fi
+
 #
 # Install the config file
 #
@@ -303,6 +308,11 @@ cd ..
 
 echo "Man Pages Installed"
 
+if [ -d ${PREFIX}/etc/logrotate.d ]; then
+    run_install $OWNERSHIP -m 0644 logrotate ${PREFIX}/etc/logrotate.d/shorewall6-lite
+    echo "Logrotate file installed as ${PREFIX}/etc/logrotate.d/shorewall6-lite"
+fi
+
 #
 # Create the version file
 #

Shorewall6-lite/logrotate

@@ -0,0 +1,5 @@
+/var/log/shorewall6-init.log {
+  missingok
+  notifempty
+  create 0600 root root
+}

Shorewall6-lite/shorecap

@@ -45,17 +45,17 @@
 #    used during firewall compilation, then the generated firewall program will likewise not
 #    require Shorewall to be installed.
 
-SHAREDIR=/usr/share/shorewall-lite
-VARDIR=/var/lib/shorewall-lite
-CONFDIR=/etc/shorewall-lite
+SHAREDIR=/usr/share/shorewall6-lite
+VARDIR=/var/lib/shorewall6-lite
+CONFDIR=/etc/shorewall6-lite
 PRODUCT="Shorewall Lite"
 
-. /usr/share/shorewall-lite/lib.base
-. /usr/share/shorewall-lite/configpath
+. /usr/share/shorewall6-lite/lib.base
+. /usr/share/shorewall6-lite/configpath
 
 [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 
-VERSION=$(cat /usr/share/shorewall-lite/version)
+VERSION=$(cat /usr/share/shorewall6-lite/version)
 
 [ -n "$IPTABLES" ] || IPTABLES=$(mywhich iptables)
 

Shorewall6-lite/shorewall6-lite

@@ -95,7 +95,7 @@ get_config() {
 
     if ( ps ax 2> /dev/null | grep -v grep |  qt grep 'syslogd.*-C' ) ; then
 	LOGREAD="logread | tac"
-    elif [ -f $LOGFILE ]; then
+    elif [ -r $LOGFILE ]; then
 	LOGREAD="tac $LOGFILE"
     else
 	echo "LOGFILE ($LOGFILE) does not exist!" >&2

Shorewall6-lite/shorewall6-lite.spec

@@ -1,6 +1,6 @@
 %define name shorewall6-lite
-%define version 4.4.0
-%define release 2
+%define version 4.4.5
+%define release 4
 
 Summary: Shoreline Firewall 6 Lite is an ip6tables-based firewall for Linux systems.
 Name: %{name}
@@ -70,6 +70,8 @@ fi
 %attr(0755,root,root) %dir /usr/share/shorewall6-lite
 %attr(0700,root,root) %dir /var/lib/shorewall6-lite
 
+%attr(0644,root,root) /etc/logrotate.d/shorewall6-lite
+
 %attr(0755,root,root) /sbin/shorewall6-lite
 
 %attr(0644,root,root) /usr/share/shorewall6-lite/version
@@ -89,10 +91,30 @@ fi
 %doc COPYING changelog.txt releasenotes.txt
 
 %changelog
-* Fri Aug 28 2009 Tom Eastep tom@shorewall.net
-- Updated to 4.4.0-2
-* Thu Aug 13 2009 Tom Eastep tom@shorewall.net
-- Updated to 4.4.0-1
+* Thu Dec 24 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-4
+* Thu Dec 24 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-4
+* Sun Dec 20 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-2
+* Sat Dec 19 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-1
+* Fri Nov 27 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-0base
+* Sat Nov 21 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0base
+* Fri Nov 13 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0Beta2
+* Wed Nov 11 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0Beta1
+* Tue Nov 03 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.3-0base
+* Sun Sep 06 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.2-0base
+* Fri Sep 04 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.2-0base
+* Fri Aug 14 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.1-0base
 * Mon Aug 03 2009 Tom Eastep tom@shorewall.net
 - Updated to 4.4.0-0base
 * Tue Jul 28 2009 Tom Eastep tom@shorewall.net

Shorewall6-lite/uninstall.sh

@@ -26,7 +26,7 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {

Shorewall6/Makefile

@@ -14,4 +14,8 @@ $(VARDIR)/${RESTOREFILE}: $(CONFDIR)/*
 	    /sbin/shorewall6 -q restart 2>&1 | tail >&2; \
 	fi
 
+clean:
+	@rm -f $(CONFDIR)/*~ $(CONFDIR)/.*~
+.PHONY: clean
+
 # EOF

Shorewall6/fallback.sh

@@ -28,7 +28,7 @@
 #       shown below. Simply run this script to revert to your prior version of
 #       Shoreline Firewall.
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {

Shorewall6/init.debian.sh

@@ -15,13 +15,11 @@
 SRWL=/sbin/shorewall6
 SRWL_OPTS="-tvv"
 WAIT_FOR_IFUP=/usr/share/shorewall6/wait4ifup
-# Note, set INITLOG to /dev/null if you do not want to
-# keep logs of the firewall (not recommended)
-INITLOG=/var/log/shorewall6-init.log
+test -n ${INITLOG:=/var/log/shorewall6-init.log}
 
 test -x $SRWL || exit 0
 test -x $WAIT_FOR_IFUP || exit 0
-test -n $INITLOG || {
+test -n "$INITLOG" || {
 	echo "INITLOG cannot be empty, please configure $0" ; 
 	exit 1;
 }

Shorewall6/install.sh

@@ -22,7 +22,7 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {
@@ -234,6 +234,12 @@ mkdir -p ${PREFIX}/var/lib/shorewall6
 chmod 755 ${PREFIX}/etc/shorewall6
 chmod 755 ${PREFIX}/usr/share/shorewall6
 chmod 755 ${PREFIX}/usr/share/shorewall6/configfiles
+
+if [ -n "$PREFIX" ]; then
+    mkdir -p ${PREFIX}/etc/logrotate.d
+    chmod 755 ${PREFIX}/etc/logrotate.d
+fi
+
 #
 # Install the config file
 #
@@ -642,6 +648,11 @@ cd ..
 
 echo "Man Pages Installed"
 
+if [ -d ${PREFIX}/etc/logrotate.d ]; then
+    run_install $OWNERSHIP -m 0644 logrotate ${PREFIX}/etc/logrotate.d/shorewall6
+    echo "Logrotate file installed as ${PREFIX}/etc/logrotate.d/shorewall6"
+fi
+
 if [ -z "$PREFIX" -a -n "$first_install" -a -z "$CYGWIN" ]; then
     if [ -n "$DEBIAN" ]; then
 	run_install $OWNERSHIP -m 0644 default.debian /etc/default/shorewall6

Shorewall6/lib.base

@@ -33,7 +33,7 @@
 #
 
 SHOREWALL_LIBVERSION=40300
-SHOREWALL_CAPVERSION=40310
+SHOREWALL_CAPVERSION=40406
 
 [ -n "${VARDIR:=/var/lib/shorewall6}" ]
 [ -n "${SHAREDIR:=/usr/share/shorewall6}" ]
@@ -260,7 +260,7 @@ reload_kernel_modules() {
 
     [ -n "${MODULE_SUFFIX:=o gz ko o.gz ko.gz}" ]
 
-    [ -z "$MODULESDIR" ] && MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv6/netfilter:/lib/modules/$(uname -r)/kernel/net/netfilter
+    [ -z "$MODULESDIR" ] && MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv6/netfilter:/lib/modules/$(uname -r)/kernel/net/netfilter:/lib/modules/$(uname -r)/kernel/net/sched
     MODULES=$(lsmod | cut -d ' ' -f1)
 
     for directory in $(split $MODULESDIR); do
@@ -296,7 +296,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
     [ -n "${MODULE_SUFFIX:=o gz ko o.gz ko.gz}" ]
 
     [ -z "$MODULESDIR" ] && \
-	MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv6/netfilter:/lib/modules/$(uname -r)/kernel/net/netfilter
+	MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv6/netfilter:/lib/modules/$(uname -r)/kernel/net/netfilter:/lib/modules/$(uname -r)/kernel/net/sched
 
     for directory in $(split $MODULESDIR); do
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
@@ -696,8 +696,6 @@ set_state () # $1 = state
 # Determine which optional facilities are supported by iptables/netfilter
 #
 determine_capabilities() {
-    qt $IP6TABLES -t mangle -L -n && MANGLE_ENABLED=Yes || MANGLE_ENABLED=
-
     CONNTRACK_MATCH=
     NEW_CONNTRACK_MATCH=
     OLD_CONNTRACK_MATCH=
@@ -747,6 +745,8 @@ determine_capabilities() {
 	exit 1
     fi
 
+    qt $IP6TABLES -t mangle -L -n && MANGLE_ENABLED=Yes || MANGLE_ENABLED=
+    
     qt $IP6TABLES -F $chain
     qt $IP6TABLES -X $chain
     if ! $IP6TABLES -N $chain; then
@@ -853,7 +853,11 @@ determine_capabilities() {
     qt $IP6TABLES -A $chain -m pkttype --pkt-type broadcast -j ACCEPT && USEPKTTYPE=Yes
     qt $IP6TABLES -A $chain -m addrtype --src-type BROADCAST -j ACCEPT && ADDRTYPE=Yes
     qt $IP6TABLES -A $chain -p tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1000:1500 -j ACCEPT && TCPMSS_MATCH=Yes
-    qt $IP6TABLES -A $chain -m hashlimit --hashlimit 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && HASHLIMIT_MATCH=Yes
+    qt $IP6TABLES -A $chain -m hashlimit --hashlimit-upto 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && HASHLIMIT_MATCH=Yes
+    if [ -z "$HASHLIMIT_MATCH" ]; then
+	qt $IP6TABLES -A $chain -m hashlimit --hashlimit 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && OLD_HL_MATCH=Yes
+	HASHLIMIT_MATCH=$OLD_HL_MATCH
+    fi	
     qt $IP6TABLES -A $chain -j NFQUEUE --queue-num 4 && NFQUEUE_TARGET=Yes
     qt $IP6TABLES -A $chain -m realm --realm 4 && REALM_MATCH=Yes
     qt $IP6TABLES -A $chain -m helper --helper "ftp" && HELPER_MATCH=Yes
@@ -868,6 +872,7 @@ determine_capabilities() {
     qt $IP6TABLES -X $chain1
 
     CAPVERSION=$SHOREWALL_CAPVERSION
+    KERNELVERSION=$(printf "%d%02d%02d" $(uname -r 2> /dev/null | sed -e 's/-.*//' -e 's/^\([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*$/\1 \2 \3/g'))
 }
 
 report_capabilities() {
@@ -917,6 +922,7 @@ report_capabilities() {
 	report_capability "Address Type Match" $ADDRTYPE
 	report_capability "TCPMSS Match" $TCPMSS_MATCH
 	report_capability "Hashlimit Match" $HASHLIMIT_MATCH
+	report_capability "Old Hashlimit Match" $OLD_HL_MATCH
 	report_capability "NFQUEUE Target" $NFQUEUE_TARGET
 	report_capability "Realm Match" $REALM_MATCH
 	report_capability "Helper Match" $HELPER_MATCH
@@ -972,6 +978,7 @@ report_capabilities1() {
     report_capability1 ADDRTYPE
     report_capability1 TCPMSS_MATCH
     report_capability1 HASHLIMIT_MATCH
+    report_capability1 OLD_HL_MATCH
     report_capability1 NFQUEUE_TARGET
     report_capability1 REALM_MATCH
     report_capability1 HELPER_MATCH
@@ -982,6 +989,7 @@ report_capabilities1() {
     report_capability1 LOG_TARGET
     
     echo CAPVERSION=$SHOREWALL_CAPVERSION
+    echo KERNELVERSION=$KERNELVERSION    
 }
 
 detect_gateway() # $1 = interface

Shorewall6/lib.cli

@@ -383,6 +383,10 @@ show_command() {
 			    option=
 			    shift
 			    ;;
+			l*)
+			    IPT_OPTIONS1="--line-numbers"
+			    option=${option#l}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -396,11 +400,15 @@ show_command() {
 	esac
     done
 
+    IPT_OPTIONS="$IPT_OPTIONS $IPT_OPTIONS1"
+
     [ -n "$debugging" ] && set -x
     case "$1" in
 	connections)
 	    [ $# -gt 1 ] && usage 1
-	    echo "$PRODUCT $version Connections at $HOSTNAME - $(date)"
+	    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+	    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+	    echo "$PRODUCT $version Connections ($count of $max) at $HOSTNAME - $(date)"
 	    echo
 	    grep '^ipv6' /proc/net/nf_conntrack
 	    ;;
@@ -505,6 +513,12 @@ show_command() {
 	vardir)
 	    echo $VARDIR;
 	    ;;
+	policies)
+	    [ $# -gt 1 ] && usage 1
+	    echo "$PRODUCT $version Policies at $HOSTNAME - $(date)"
+	    echo
+	    [ -f ${VARDIR}/policies ] && cat ${VARDIR}/policies;
+	    ;;
 	*)
 	    if [ "$PRODUCT" = Shorewall6 ]; then
 		case $1 in
@@ -602,6 +616,10 @@ dump_command() {
 			    SHOWMACS=Yes
 			    option=${option#m}
 			    ;;
+			l*)
+			    IPT_OPTIONS1="--line-numbers"
+			    option=${option#l}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -615,6 +633,8 @@ dump_command() {
 	esac
     done
 
+    IPT_OPTIONS="$IPT_OPTIONS $IPT_OPTIONS1"
+
     [ $VERBOSE -lt 2 ] && VERBOSE=2
 
     [ -n "$debugging" ] && set -x
@@ -641,7 +661,10 @@ dump_command() {
     heading "Raw Table"
     $IP6TABLES -t raw -L $IPT_OPTIONS
 
-    heading "Conntrack Table"
+    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+
+    heading "Conntrack Table ($count out of $max)"
     grep '^ipv6' /proc/net/nf_conntrack
 
     heading "IP Configuration"

Shorewall6/logrotate

@@ -0,0 +1,5 @@
+/var/log/shorewall6-init.log {
+  missingok
+  notifempty
+  create 0600 root root
+}

Shorewall6/modules

@@ -85,6 +85,7 @@ loadmodule sch_ingress
 loadmodule sch_htb
 loadmodule cls_u32
 loadmodule cls_fw
+loadmodule cls_flow
 loadmodule act_police
 #
 # Extensions

Shorewall6/shorewall6

@@ -23,99 +23,9 @@
 #	along with this program; if not, write to the Free Software
 #	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#	If an error occurs while starting or restarting the firewall, the
-#	firewall is automatically stopped.
+#       For a list of supported commands, type 'shorewall6 help'
 #
-#	The firewall uses configuration files in /etc/shorewall/ - skeleton
-#	files are included with the firewall.
-#
-#	Commands are:
-#
-#          shorewall6 add <iface>[:<host>] zone    Adds a host or subnet to a zone
-#          shorewall6 delete <iface>[:<host>] zone Deletes a host or subnet from a zone
-#          shorewall6 dump                         Dumps all Shorewall6-related information
-#                                                  for problem analysis
-#	   shorewall6 start 			   Starts the firewall
-#	   shorewall6 restart			   Restarts the firewall
-#	   shorewall6 stop			   Stops the firewall
-#	   shorewall6 status			   Displays firewall status
-#	   shorewall6 reset			   Resets ip6tables packet and
-#						   byte counts
-#	   shorewall6 clear			   Open the floodgates by
-#						   removing all ip6tables rules
-#						   and setting the three permanent
-#						   chain policies to ACCEPT
-#	   shorewall6 refresh			   Rebuild the common chain to
-#						   compensate for a change of
-#						   broadcast address on any "detect"
-#						   interface.
-#	   shorewall6 [re]load [ <directory> ] <system>
-#						   Compile a script and install it on a
-#						   remote Shorewall6 Lite system.
-#	   shorewall6 show <chain> [ <chain> ... ] Display the rules in each <chain> listed
-#          shorewall6 show actions                 Displays the available actions
-#	   shorewall6 show log			   Print the last 20 log messages
-#	   shorewall6 show connections		   Show the kernel's connection
-#						   tracking table
-#	   shorewall6 show nat			   Display the rules in the nat table
-#	   shorewall6 show {mangle|tos}		   Display the rules in the mangle table
-#	   shorewall6 show tc			   Display traffic control info
-#	   shorewall6 show classifiers		   Display classifiers
-#          shorewall6 show capabilities            Display ip6tables/kernel capabilities
-#          shorewall6 show vardir                  Display the VARDIR setting.
-#	   shorewall6 version			   Display the installed version id
-#	   shorewall6 check [ -e ] [ <directory> ] Dry-run compilation.
-#	   shorewall6 try <directory> [ <timeout> ] Try a new configuration and if
-#						   it doesn't work, revert to the
-#						   standard one. If a timeout is supplied
-#						   the command reverts back to the
-#						   standard configuration after that many
-#						   seconds have elapsed after successfully
-#						   starting the new configuration.
-#	   shorewall6 logwatch [ refresh-interval ] Monitor the local log for Shorewall6
-#						    messages.
-#	   shorewall6 drop <address> ...	   Temporarily drop all packets from the
-#						   listed address(es)
-#	   shorewall6 reject <address> ...	   Temporarily reject all packets from the
-#						   listed address(es)
-#	   shorewall6 allow <address> ...	   Reenable address(es) previously
-#						   disabled with "drop" or "reject"
-#	   shorewall6 save [ <file> ]		   Save the list of "rejected" and
-#						   "dropped" addresses so that it will
-#						   be automatically reinstated the
-#						   next time that Shorewall6 starts.
-#                                                  Save the current state so that 'shorewall6
-#                                                  restore' can be used.
-#
-#          shorewall6 forget [ <file> ]            Discard the data saved by 'shorewall6 save'
-#
-#          shorewall6 restore [ <file> ]           Restore the state of the firewall from
-#                                                  previously saved information.
-#
-#          shorewall6 ipaddr { <address>/<cidr> | <address> <netmask> }
-#
-#                                                  Displays information about the network
-#                                                  defined by the argument[s]
-#
-#          shorewall6 iprange <address>-<address>  Decomposes a range of IP addresses into
-#                                                  a list of network/host addresses.
-#
-#          shorewall6 ipdecimal { <address> | <integer> }
-#
-#                                                  Displays the decimal equivalent of an IP
-#                                                  address and vice versa.
-#
-#          shorewall6 safe-start [ <directory> ]   Starts the firewall and promtp for a c
-#                                                  confirmation to accept or reject the new
-#                                                  configuration
-#
-#          shorewall6 safe-restart [ <directory> ] Restarts the firewall and prompt for a
-#                                                  confirmation to accept or reject the new
-#                                                  configuration
-#
-#          shorewall6 compile [ -e ] [ <directory> ] <filename>
-#                                                  Compile a firewall program file.
-
+################################################################################################
 #
 # Set the configuration variables from shorewall6.conf
 #
@@ -163,7 +73,7 @@ get_config() {
 
 	    if [ -n "$(syslog_circular_buffer)" ]; then
 		LOGREAD="logread | tac"
-	    elif [ -f $LOGFILE ]; then
+	    elif [ -r $LOGFILE ]; then
 		LOGREAD="tac $LOGFILE"
 	    else
 		echo "LOGFILE ($LOGFILE) does not exist!" >&2
@@ -205,7 +115,7 @@ get_config() {
 		    ;;
 		*)
 		    if [ -n "$STARTUP_ENABLED" ]; then
-			echo "   ERROR: Invalid Value for STARTUP_ENABLE: $STARTUP_ENABLED" >&2
+			echo "   ERROR: Invalid Value for STARTUP_ENABLED: $STARTUP_ENABLED" >&2
 			exit 2
 		    fi
 		    ;;
@@ -1379,7 +1289,7 @@ usage() # $1 = exit status
     echo "   restart [ -n ] [ -f ] [ <directory> ]"
     echo "   restore [ -n ] [ <file name> ]"
     echo "   save [ <file name> ]"
-    echo "   show [ -x ] [ -m ] [-f] [ -t {filter|mangle} ] [ {chain [<chain> [ <chain> ... ]|actions|capabilities|classifiers|config|connections|filters|ip|log|macros|mangle|nat|raw|routing|tc|vardir|zones} ]"
+    echo "   show [ -x ] [ -m ] [-f] [ -t {filter|mangle} ] [ {chain [<chain> [ <chain> ... ]|actions|capabilities|classifiers|config|connections|filters|ip|log|macros|mangle|nat|policies|raw|routing|tc|vardir|zones} ]"
     echo "   start [ -f ] [ -n ] [ <directory> ]"
     echo "   stop [ -f ]"
     echo "   status"

Shorewall6/shorewall6.conf

@@ -32,9 +32,9 @@ VERBOSITY=1
 
 LOGFILE=/var/log/messages
 
-STARTUP_LOG=
+STARTUP_LOG=/var/log/shorewall6-init.log
 
-LOG_VERBOSITY=
+LOG_VERBOSITY=2
 
 LOGFORMAT="Shorewall:%s:%s:"
 
@@ -145,6 +145,10 @@ AUTOMAKE=No
 
 WIDE_TC_MARKS=No
 
+TRACK_PROVIDERS=No
+
+ZONE2ZONE=2
+
 ###############################################################################
 #			P A C K E T   D I S P O S I T I O N
 ###############################################################################

Shorewall6/shorewall6.spec

@@ -1,6 +1,6 @@
 %define name shorewall6
-%define version 4.4.0
-%define release 2
+%define version 4.4.5
+%define release 4
 
 Summary: Shoreline Firewall 6 is an ip6tables-based firewall for Linux systems.
 Name: %{name}
@@ -69,6 +69,8 @@ fi
 %attr(0644,root,root) %config(noreplace) /etc/shorewall6/*
 %attr(0600,root,root) /etc/shorewall6/Makefile
 
+%attr(0644,root,root) /etc/logrotate.d/shorewall6
+
 %attr(0755,root,root) /sbin/shorewall6
 
 %attr(0644,root,root) /usr/share/shorewall6/version
@@ -93,10 +95,30 @@ fi
 %doc COPYING INSTALL changelog.txt releasenotes.txt tunnel ipsecvpn ipv6 Samples6
 
 %changelog
-* Fri Aug 28 2009 Tom Eastep tom@shorewall.net
-- Updated to 4.4.0-2
-* Thu Aug 13 2009 Tom Eastep tom@shorewall.net
-- Updated to 4.4.0-1
+* Thu Dec 24 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-4
+* Thu Dec 24 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-4
+* Sun Dec 20 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-2
+* Sat Dec 19 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-1
+* Fri Nov 27 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.5-0base
+* Sat Nov 21 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0base
+* Fri Nov 13 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0Beta2
+* Wed Nov 11 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.4-0Beta1
+* Fri Oct 02 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.3-0base
+* Sun Sep 06 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.2-0base
+* Fri Sep 04 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.2-0base
+* Fri Aug 14 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.1-0base
 * Mon Aug 03 2009 Tom Eastep tom@shorewall.net
 - Updated to 4.4.0-0base
 * Tue Jul 28 2009 Tom Eastep tom@shorewall.net

Shorewall6/uninstall.sh

@@ -26,7 +26,7 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=4.4.0.2
+VERSION=4.4.5.4
 
 usage() # $1 = exit status
 {

contrib/shoregen/AUTHORS

@@ -1 +0,0 @@
-Paul Gear <paul@gear.dyndns.org>

contrib/shoregen/BUGS

@@ -1 +0,0 @@
-None known at present.

contrib/shoregen/COPYING

@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.

contrib/shoregen/ChangeLog

@@ -1,14 +0,0 @@
-0.1.1	Paul Gear <paul@gear.dyndns.org>  No idea when
-	- Initial release.
-
-0.1.2	Paul Gear <paul@gear.dyndns.org>  No idea when
-	- Removed filtering of zones that are on the same interface.
-	  This caused problems when a zone was accessible via more than
-	  one interface.
-
-0.1.3	Paul Gear <paul@gear.dyndns.org>  No idea when
-	- Optimisation to detect whether system is a router and remove
-	  redundant zones from rules and policies if so.
-
-3.2.0-beta1	Paul Gear <paul@gear.dyndns.org>
-	- First attempt at compatibility with Shorewall 3.2.x.

contrib/shoregen/README

@@ -1,124 +0,0 @@
-Shoreline Firewall configuration generator
-(c) Copyright 2004-2006 Paul D. Gear <paul@gear.dyndns.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-SHOREWALL
-
-The quick plug:
-
-  - Shorewall is the only firewall i trust.
-
-The IT Manager plug:
-
-  - Shorewall is a policy-driven firewall which lets you think about your
-    firewall at a higher level than iptables commands.
-
-The hard sell to you crazy people still maintaining manual firewall scripts:
-
-  - Shorewall is a wrapper around the kernel iptables, so your existing
-    Linux firewall skills transfer.  I converted from a 900-plus-line
-    ipchains shell script to around 50 lines of shorewall configuration in
-    less than 4 hours, with no prior experience.
-
-
-ISSUES
-
-  - I'm paranoid - i want more than one firewall between me and the world.
-
-  - Configuring multiple firewalls separately is a recipe for getting your
-    rules out of sync, and allowing security problems to creep in.
-
-  - IT Manager types (like me) like to know their policy is consistently
-    implemented.
-
-
-SOLUTION
-
-Shoregen is a script that generates shorewall configurations for multiple
-firewalls from a common set of rules and policies.  Only the minimal
-information necessary for operation is stored on each firewall, so, for
-example, your DMZ server doesn't need to know about the rules on your
-internal network, but at the same time, it gets consistent rules to your
-outer guard.
-
-
-PHILOSOPHY
-
-Shoregen assumes the X-Files approach to firewall design: trust no one.
-That is, paranoia is a virtue.  All access should be as limited as possible
-for things to work.  If you don't already agree with this philosophy, you
-may find some of the things shoregen does frustrating, but then again,
-you're probably not reading this document.  :-)
-
-
-DESIGN
-
-Shoregen distinguishes between two different types of shorewall
-configuration files.  Most shorewall configuration files are simply
-concatenated together from parts constructed from common and host-specific
-parts.  These are called simple configs; shoregen doesn't substantially
-alter them, and uses little information from them.
-
-Configs with which shoregen is more concerned are treated separately, and
-additional features beyond the scope of shorewall itself are implemented.
-Most importantly, two new policy/rule keywords are introduced: WARN and
-BAN.  These keywords are not included in shoregen's output, but when a
-subsequent rule or policy is encountered which matches a rule or policy
-marked WARN or BAN, an error message is issued.  In the case of BAN, the
-offending line is also dropped from the output, and a non-zero return code
-issued.
-
-
-PREREQUISITES
-
-The tools you will need to use shoregen are:
-	perl	The main shoregen script is written in Perl
-	rsync	Used to keep /etc/shorewall directories on your firewalls
-		in sync with the central repository
-	ssh	Encrypted transport for rsync
-	make	Optional, but saves a few keystrokes.
-
-
-USAGE
-
-Put shoregen and install_shoregen in a directory on your PATH.
-
-Make a central directory for your configs.  I recommend somewhere in a
-trusted user's home directory or central system admin repository.  This
-directory should be on a trusted machine in the most secure part of your
-network.  Put all of your policies, rules, and zones together in the
-correct order in files in the top level of this directory.
-
-For each of the simple configs you want to generate centrally, create a
-directory, with a file called COMMON (if necessary) containing the content
-you want to see in that file on all hosts, and a file named for each host
-for host-specific content.  I recommend that the default shorewall
-configuration file be placed in the COMMON file of the corresponding
-directory, with directives that are not appropriate commented out.
-
-When shoregen is run, it places the generated files in the directory 
-SPOOL/<host>, where <host> is the hostname of the target firewall.  The
-files in this directory are synchronised and the firewall checked and/or
-restarted by a simple wrapper script called install_shoregen.
-
-See the samples directory for a starting point configuration.  It provides
-some suggested policies & rules for the network shown in example1.png.  The
-sample configuration has not been tested in any way.
-
-I hope you find shoregen useful.  I welcome your comments, contributions,
-criticisms, and questions.
-

contrib/shoregen/TODO

@@ -1,21 +0,0 @@
-
-- Make it possible for a host to have the same $FW name as the zone in
-  which it belongs, and have shoregen automatically create appropriate
-  rules.
-
-- At the moment, if a fully-expanded policy file (such as is shown 
-
-- Better rule & policy sanitisation.
-
-- Hosts and interfaces could be reduced based on what's used in the policy
-  and rules files.
-
-- The Makefile could be improved to detect changes in the lower level
-  config files and call shoregen automatically when they are out-of-date.
-  At the moment, shoregen is so simple (and thus fast) that the amount of
-  time that would be saved by a clever Makefile (in comparison to the
-  rsync, ssh, and shorewall steps) is probably not worth the trouble to
-  code.
-
-- Automatic generation of firewall hosts & interfaces files.
-

contrib/shoregen/install_shoregen

@@ -1,116 +0,0 @@
-#!/bin/sh
-#
-# $Id: install_shoregen,v 1.5 2004/04/22 11:12:51 paulgear Exp $
-# 
-# Wrapper script to install shoregen-generated shorewall configuration files.
-#
-
-# 
-# (c) Copyright 2004 Paul D. Gear <paul@gear.dyndns.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2 of the License, or (at your
-# option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
-# Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA, or go to
-# <http://www.gnu.org/licenses/old-licenses/gpl-2.0.txtl> on the World Wide Web.
-
-VERBOSE=0
-RESTART=0
-CHECK=1
-TIME=0
-
-usage()
-{
-    echo "Usage:	$0 [--verbose] [--restart] host ...
-	Generates and installs shorewall configuration on the given hosts" >&2
-    exit 1
-}
-
-error()
-{
-    echo "$0: ERROR -" "$@" >&2
-}
-
-while :; do
-    case "$1" in
-
-    -v|--verbose)
-    	VERBOSE=1
-	shift
-	;;
-
-    -r|--restart)
-	RESTART=1
-	shift
-	;;
-
-    -c|--nocheck)
-	CHECK=0
-	shift
-	;;
-
-    -t|--notime)
-	TIME=0
-	shift
-	;;
-
-    --)
-	shift
-	break 2
-    	;;
-
-    --*)
-	error "Unrecognised option $1"
-	usage
-	;;
-
-    *)
-	break 2
-    	;;
-
-    esac
-done
-
-set -e
-set -u
-
-if [ "$#" -lt 1 ]; then
-    usage
-fi
-
-USER=root
-RSYNC_ARGS="--recursive --backup --times --cvs-exclude --rsh=ssh"
-#--progress 
-if [ "$VERBOSE" -gt 0 ]; then
-    RSYNC_ARGS="$RSYNC_ARGS --verbose"
-fi
-DIR=/etc/shorewall
-SW_PATH=/sbin/shorewall
-
-PATH=$PATH:
-
-if [ "$TIME" -gt 0 ]; then
-    TIME="time"
-else
-    TIME=""
-fi
-
-for HOST; do
-    shoregen $HOST
-    rsync $RSYNC_ARGS SPOOL/$HOST/ $USER@$HOST:$DIR/
-    if [ "$CHECK" -gt 0 ]; then
-	$TIME ssh -l $USER -t $HOST $SW_PATH check
-    fi
-    if [ "$RESTART" -gt 0 ]; then
-	$TIME ssh -l $USER -t $HOST $SW_PATH restart
-    fi
-done

contrib/shoregen/samples/Makefile

@@ -1,10 +0,0 @@
-FLAGS=-c -r
-HOSTS=ig proxy mail og
-
-default:	$(HOSTS)
-
-$(HOSTS):
-	shoregen $@
-
-install:	$(HOSTS)
-	install_shoregen -c -r $(HOSTS)

contrib/shoregen/samples/hosts/ig

@@ -1,13 +0,0 @@
-# ZONE		HOST(S)				OPTIONS
-
-# I used the vi command
-#	!Gsort -k2 -k1 
-# to sort this file, starting at the next line.
-mail		eth0:$MAIL
-og		eth0:$OG
-proxy		eth0:$PROXY
-net		eth0:0.0.0.0/0
-lan		eth1:$LAN
-other		eth1:0.0.0.0/0
-guest		eth2:$GUEST
-other		eth2:0.0.0.0/0