Reinstate IPv6 DropSmurfs

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -98,7 +98,7 @@ if [ -z "$vendor" ]; then
 	eval $(cat /etc/os-release | grep ^ID=)
 
 	case $ID in
-	    fedora)
+	    fedora|rhel)
 		vendor=redhat
 		;;
 	    debian|ubuntu)

Shorewall-core/configure.pl

@@ -64,7 +64,7 @@ unless ( defined $vendor ) {
 
 	$id =~ s/ID=//;
 	
-	if ( $id eq 'fedora' ) {
+	if ( $id eq 'fedora' || $id eq 'rhel' ) {
 	    $vendor = 'redhat';
 	} elsif ( $id eq 'opensuse' ) {
 	    $vendor = 'suse';
@@ -100,7 +100,7 @@ if ( defined $vendor ) {
     } elsif ( `uname` =~ '^Darwin' ) {
 	$vendor = 'apple';
 	$rcfilename = 'shorewallrc.apple';
-    } elsif ( `uname` =~ '^Cygwin' ) {
+    } elsif ( `uname` =~ /^Cygwin/i ) {
 	$vendor = 'cygwin';
 	$rcfilename = 'shorewallrc.cygwin';
     } else {

Shorewall-core/install.sh

@@ -187,7 +187,7 @@ INSTALLD='-D'
 
 if [ -z "$BUILD" ]; then
     case $(uname) in
-	cygwin*)
+	cygwin*|CYGWIN*)
 	    BUILD=cygwin
 	    ;;
 	Darwin)
@@ -198,7 +198,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID)
 
 		case $ID in
-		    fedora)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian)

Shorewall-core/lib.cli

@@ -252,7 +252,15 @@ show_classifiers() {
 
 	if [ -n "$qdisc" ]; then
 	    echo Device $device:
-	    tc -s filter ls dev $device
+	    qt tc -s filter ls root dev $device && tc -s filter ls root dev $device | grep -v '^$'
+	    tc filter show dev $device
+	    tc class show dev $device | fgrep 'leaf ' | fgrep -v ' hfsc' | sed 's/^.*leaf //;s/ .*//' | while read class; do
+		if [ -n "$class" ]; then
+		    echo
+		    echo Node $class
+		    tc filter show dev $device parent $class
+		fi
+	    done
 	    echo
 	fi
     }
@@ -263,6 +271,19 @@ show_classifiers() {
 
 }
 
+#
+# Display blacklist chains
+#
+show_bl() {
+    $g_tool -L $g_ipt_options | \
+	awk 'BEGIN           {prnt=0; };
+            /^$/             {if (prnt == 1) print ""; prnt=0; };
+            /Chain .*~ /     {prnt=1; };
+            /Chain dynamic / {prnt=1; };
+            {if (prnt == 1)  print; };
+            END {if (prnt == 1 ) print "" };'
+}
+
 #
 # Watch the Firewall Log
 #
@@ -407,45 +428,47 @@ do_save() {
 	    ;;
     esac
 
-    case ${SAVE_IPSETS:=No} in
-	[Yy]es)
-	    case ${IPSET:=ipset} in
-		*/*)
-		    if [ ! -x "$IPSET" ]; then
-			error_message "ERROR: IPSET=$IPSET does not exist or is not executable - ipsets are not saved"
-			IPSET=
+    if ! run_it ${VARDIR}/firewall savesets ${g_restorepath}-ipsets; then
+	case ${SAVE_IPSETS:=No} in
+	    [Yy]es)
+		case ${IPSET:=ipset} in
+		    */*)
+			if [ ! -x "$IPSET" ]; then
+			    error_message "ERROR: IPSET=$IPSET does not exist or is not executable - ipsets are not saved"
+			    IPSET=
+			fi
+			;;
+		    *)
+			IPSET="$(mywhich $IPSET)"
+			[ -n "$IPSET" ] || error_message "ERROR: The ipset utility cannot be located - ipsets are not saved"
+			;;
+		esac
+
+		if [ -n "$IPSET" ]; then
+		    if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then
+			#
+			# The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny
+			#
+			hack='| grep -v /31'
+		    else
+			hack=
 		    fi
-		    ;;
-		*)
-		    IPSET="$(mywhich $IPSET)"
-		    [ -n "$IPSET" ] || error_message "ERROR: The ipset utility cannot be located - ipsets are not saved"
-		    ;;
-	    esac
 
-	    if [ -n "$IPSET" ]; then
-		if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then
-                    #
-                    # The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny
-                    #
-		    hack='| grep -v /31'
-		else
-		    hack=
+		    if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then
+			#
+			# Don't save an 'empty' file
+			#
+			grep -qE -- '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${g_restorepath}-ipsets
+		    fi
 		fi
-
-		if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then
-                    #
-                    # Don't save an 'empty' file
-                    #
-		    grep -qE -- '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${g_restorepath}-ipsets
-		fi
-	    fi
-	    ;;
-	[Nn]o)
-	    ;;
-	*)
-	    error_message "WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS"
-	    ;;
-    esac
+		;;
+	    [Nn]o)
+		;;
+	    *)
+		error_message "WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS"
+		;;
+	esac
+    fi
 
     return $status
 }
@@ -1181,7 +1204,13 @@ show_command() {
 	    echo "$g_product $SHOREWALL_VERSION events at $g_hostname - $(date)"
 	    echo
 	    show_events
-	    ;;	    
+	    ;;
+	bl|blacklists)
+	    [ $# -gt 1 ] && usage 1
+	    echo "$g_product $SHOREWALL_VERSION blacklist chains at $g_hostname - $(date)"
+	    echo
+	    show_bl;
+	    ;;
 	*)
 	    case "$g_program" in
 		*-lite)
@@ -1443,10 +1472,22 @@ do_dump_command() {
 	$g_tool -t rawpost -L $g_ipt_options
     fi
 
-    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
-    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+    local count
+    local max
 
-    heading "Conntrack Table ($count out of $max)"
+    if [ -f /proc/sys/net/netfilter/nf_conntrack_count ]; then
+	count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+	max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+
+	heading "Conntrack Table ($count out of $max)"
+    elif [ -f /proc/sys/net/ipv4/netfilter/ip_conntrack_count ]; then
+	count=$(cat /proc/sys/net/ipv4/netfilter/ip_conntrack_count)
+	max=$(cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max)
+
+	heading "Conntrack Table ($count out of $max)"
+    else
+	heading "Conntrack Table"
+    fi
 
     if [ $g_family -eq 4 ]; then
     	[ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack
@@ -1546,7 +1587,7 @@ do_dump_command() {
 }
 
 dump_command() {
-    do_dump_command | dump_filter
+    do_dump_command $@ | dump_filter
 }
 
 #
@@ -1896,6 +1937,8 @@ add_command() {
 		ipset=6_${zone}_${interface};
 	    fi
 
+	    ipset=$(echo $ipset | sed 's/./_/g');
+
 	    if ! qt $IPSET -L $ipset; then
 		fatal_error "Zone $zone, interface $interface does not have a dynamic host list"
 	    fi
@@ -1984,6 +2027,8 @@ delete_command() {
 		ipset=6_${zone}_${interface};
 	    fi
 
+	    ipset=$(echo $ipset | sed 's/./_/g');
+
 	    if ! qt $IPSET -L $ipset -n; then
 		fatal_error "Zone $zone, interface $interface does not have a dynamic host list"
 	    fi
@@ -2311,6 +2356,7 @@ determine_capabilities() {
     CONDITION_MATCH=
     IPTABLES_S=
     BASIC_FILTER=
+    BASIC_EMATCH=
     CT_TARGET=
     STATISTIC_MATCH=
     IMQ_TARGET=
@@ -2639,8 +2685,15 @@ determine_capabilities() {
     qt $g_tool -F $chain1
     qt $g_tool -X $chain1
 
-    [ -n "$TC" ] && $TC filter add flow help 2>&1 | grep -q ^Usage && FLOW_FILTER=Yes
-    [ -n "$TC" ] && $TC filter add basic help 2>&1 | grep -q ^Usage && BASIC_FILTER=Yes
+    if [ -n "$TC" ]; then
+	$TC filter add flow help 2>&1 | grep -q ^Usage && FLOW_FILTER=Yes
+
+	if $TC filter add basic help 2>&1 | grep -q ^Usage; then
+	    BASIC_FILTER=Yes
+	    $TC filter add basic help 2>&1 | egrep -q match && BASIC_EMATCH=Yes
+	fi
+    fi
+
     [ -n "$IP" ] && $IP rule add help 2>&1 | grep -q /MASK && FWMARK_RT_MASK=Yes
 
     CAPVERSION=$SHOREWALL_CAPVERSION
@@ -2685,7 +2738,7 @@ report_capabilities_unsorted() {
     report_capability "Packet length Match (LENGTH_MATCH)" $LENGTH_MATCH
     report_capability "IP range Match(IPRANGE_MATCH)" $IPRANGE_MATCH
     report_capability "Recent Match (RECENT_MATCH)" $RECENT_MATCH
-    [ -n "$RECENT_MATCH" ] && report_capability 'Recent Match "--reap" option (REAP_OPTION)'
+    [ -n "$RECENT_MATCH" ] && report_capability 'Recent Match "--reap" option (REAP_OPTION)' $REAP_OPTION
     report_capability "Owner Match (OWNER_MATCH)" $OWNER_MATCH
     report_capability "Owner Name Match (OWNER_NAME_MATCH)" $OWNER_NAME_MATCH
     if [ -n "$IPSET_MATCH" ]; then
@@ -2771,6 +2824,7 @@ report_capabilities_unsorted() {
     fi
 
     report_capability "Basic Filter (BASIC_FILTER)" $BASIC_FILTER
+    report_capability "Basic Ematch (BASIC_EMATCH)" $BASIC_EMATCH
     report_capability "CT Target (CT_TARGET)" $CT_TARGET
 
     echo "   Kernel Version (KERNELVERSION): $KERNELVERSION"
@@ -2859,6 +2913,7 @@ report_capabilities_unsorted1() {
     report_capability1 CONDITION_MATCH
     report_capability1 IPTABLES_S
     report_capability1 BASIC_FILTER
+    report_capability1 BASIC_EMATCH
     report_capability1 CT_TARGET
     report_capability1 STATISTIC_MATCH
     report_capability1 IMQ_TARGET
@@ -2921,19 +2976,83 @@ show_status() {
     fi
 
     if [ $VERBOSITY -ge 1 ]; then 
-	echo "State:$state"
 	if [ -f $g_firewall ]; then
-	    echo $g_echo_n "$g_firewall was compiled by Shorewall version "
-	    $g_firewall version
+	    state="$state ($g_firewall compiled by Shorewall version $($g_firewall version))"
 	fi
+	echo "State:$state"
+	echo
     fi
 
 }
 
+interface_status() {
+    case $(cat $1) in
+	0)
+	    echo Enabled
+	    ;;
+	1)
+	    echo Disabled
+	    ;;
+	*)
+	    echo Unknown
+	    ;;
+    esac
+}
+
+show_interfaces() {
+    local f
+    local interface
+    local printed
+
+    for f in ${VARDIR}/*.status; do
+	interface=$(basename $f)
+	echo "   Interface ${interface%.status} is $(interface_status $f)"
+	printed=Yes
+    done
+
+    [ -n "$printed" ] && echo
+}
+
 status_command() {
+     local finished
+    finished=0
+    local option
+    local interfaces
+
+    while [ $finished -eq 0 -a $# -gt 0 ]; do
+	option=$1
+	case $option in
+	    -*)
+		option=${option#-}
+
+		while [ -n "$option" ]; do
+		    case $option in
+			-)
+			    finished=1
+			    option=
+			    ;;
+			i*)
+			    interfaces=Yes
+			    option=${option#i}
+			    ;;
+			*)
+			    usage 1
+			    ;;
+		    esac
+		done
+		shift
+		;;
+	    *)
+		finished=1
+		;;
+	esac
+    done
+
+    [ $# -eq 0 ] || usage 1
+
     [ $VERBOSITY -ge 1 ] && echo "${g_product}-$SHOREWALL_VERSION Status at $g_hostname - $(date)" && echo
     show_status
-    [ $VERBOSITY -ge 1 ] && echo
+    [ -n "$interfaces" ] && show_interfaces
     exit $status
 }
 
@@ -3410,6 +3529,14 @@ restart_command() {
     return $rc
 }
 
+run_command() {
+    if [ -x ${VARDIR}/firewall ] ; then
+	run_it ${VARDIR}/firewall $g_debugging $@
+    else
+	fatal_error "${VARDIR}/firewall does not exist or is not executable"
+    fi
+}
+
 #
 # Give Usage Information
 #
@@ -3423,7 +3550,7 @@ usage() # $1 = exit status
     echo "   delete <interface>[:<host-list>] ... <zone>"
     echo "   disable <interface>"
     echo "   drop <address> ..."
-    echo "   dump [ -x ]"
+    echo "   dump [ -x ] [ -l ] [ -m ]"
     echo "   enable <interface>"
     echo "   forget [ <file name> ]"
     echo "   help"
@@ -3441,10 +3568,12 @@ usage() # $1 = exit status
     echo "   reset [ <chain> ... ]"
     echo "   restart [ -n ] [ -p ] [ -f ] [ <directory> ]"
     echo "   restore [ -n ] [ <file name> ]"
+    echo "   run <command> [ <parameter> ... ]"
     echo "   save [ <file name> ]"
     echo "   [ show | list | ls ] [ -b ] [ -x ] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]"
     echo "   [ show | list | ls ] [ -f ] capabilities"
     echo "   [ show | list | ls ] arptables"
+    echo "   [ show | list | ls ] [ -x ] {bl|blacklists}"
     echo "   [ show | list | ls ] classifiers"
     echo "   [ show | list | ls ] config"
     echo "   [ show | list | ls ] connections"
@@ -3467,7 +3596,7 @@ usage() # $1 = exit status
     echo "   [ show | list | ls ] zones"
     echo "   start [ -f ] [ -p ] [ <directory> ]"
     echo "   stop"
-    echo "   status"
+    echo "   status [ -i ]"
     echo "   version [ -a ]"
     echo
     exit $1
@@ -3516,6 +3645,7 @@ shorewall_cli() {
     g_doing="Compiling"
     g_directives=
     g_inline=
+    g_tcrules=
 
     VERBOSE=
     VERBOSITY=1
@@ -3711,16 +3841,21 @@ shorewall_cli() {
 		fatal_error "$g_product is not running"
 	    fi
 	    ;;
+	run)
+	    [ $# -gt 1 ] || fatal_error "Missing function name"
+	    get_config Yes
+	    run_command $@
+	    ;;
 	show|list|ls)
 	    get_config Yes No Yes
     	    shift
     	    show_command $@
 	    ;;
 	status)
-	    [ $# -eq 1 ] || usage 1
 	    [ "$(id -u)" != 0 ] && fatal_error "The status command may only be run by root"
 	    get_config
-	    status_command
+	    shift
+	    status_command $@
 	    ;;
 	dump)
 	    get_config Yes No Yes

Shorewall-core/lib.common

@@ -172,6 +172,7 @@ run_it() {
 error_message() # $* = Error Message
 {
    echo "   $@" >&2
+   return 1
 }
 
 #

Shorewall-core/shorewallrc.suse

@@ -8,7 +8,7 @@ CONFDIR=/etc                                          #Directory where subsystem
 SHAREDIR=${PREFIX}/share                              #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/lib                              #Directory for executable scripts.
 PERLLIBDIR=${PREFIX}/lib/perl5/vendor_perl/5.14.2     #Directory to install Shorewall Perl module directory
-SBINDIR=/sbin                                         #Directory where system administration programs are installed
+SBINDIR=/usr/sbin                                     #Directory where system administration programs are installed
 MANDIR=${SHAREDIR}/man/                               #Directory where manpages are installed.
 INITDIR=/etc/init.d                                   #Directory where SysV init scripts are installed.
 INITFILE=$PRODUCT                                     #Name of the product's SysV init script

Shorewall-init/init.debian.sh

@@ -105,24 +105,35 @@ shorewall_start () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
+      if [ -x ${STATEDIR}/firewall ]; then
           #
 	  # Run in a sub-shell to avoid name collisions
 	  #
 	  ( 
-	      if ! ${STATEDIR}/$PRODUCT/firewall status > /dev/null 2>&1; then
-		  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} stop || echo_notdone
+	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop || echo_notdone
 	      else
 		  echo_notdone
 	      fi
 	  )
       else
-	  echo echo_notdone
+	  echo_notdone
       fi
   done
 
   echo "done."
 
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+
+      echo -n "Restoring ipsets: "
+
+      if ! ipset -R < "$SAVE_IPSETS"; then
+	  echo_notdone
+      fi
+
+      echo "done."
+  fi
+
   return 0
 }
 
@@ -135,13 +146,27 @@ shorewall_stop () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
-	  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} clear || echo_notdone
+      if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear || echo_notdone
       fi
   done
 
   echo "done."
 
+  if [ -n "$SAVE_IPSETS" ]; then
+
+      echo "Saving ipsets: "
+
+      mkdir -p $(dirname "$SAVE_IPSETS")
+      if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+      else
+	  echo_notdone
+      fi
+
+      echo "done."
+  fi
+
   return 0
 }
 

Shorewall-init/install.sh

@@ -35,6 +35,7 @@ usage() # $1 = exit status
     echo "usage: $ME [ <configuration-file> ]"
     echo "       $ME -v"
     echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
@@ -105,9 +106,12 @@ PRODUCT=shorewall-init
 T='-T'
 
 finished=0
+configure=1
 
 while [ $finished -eq 0 ] ; do
-    case "$1" in
+    option="$1"
+
+    case "$option" in
 	-*)
 	    option=${option#-}
 
@@ -120,6 +124,10 @@ while [ $finished -eq 0 ] ; do
 			echo "Shorewall-init Firewall Installer Version $VERSION"
 			exit 0
 			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
 		    *)
 			usage 1
 			;;
@@ -176,6 +184,8 @@ for var in SHAREDIR LIBEXECDIR CONFDIR SBINDIR VARLIB VARDIR; do
     require $var
 done
 
+[ -n "$SANDBOX" ] && configure=0
+
 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 
 if [ -z "$BUILD" ]; then
@@ -191,7 +201,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID=)
 
 		case $ID in
-		    fedora)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian|ubuntu)
@@ -306,6 +316,7 @@ fi
 # Install the Firewall Script
 #
 if [ -n "$INITFILE" ]; then
+    mkdir -p ${DESTDIR}${INITDIR}
     install_file $INITSOURCE ${DESTDIR}${INITDIR}/$INITFILE 0544
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${INITDIR}/$INITFILE
     
@@ -322,10 +333,10 @@ fi
 if [ -n "$SYSTEMD" ]; then
     mkdir -p ${DESTDIR}${SYSTEMD}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 600 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
-    if [ -n "$DESTDIR" ]; then
+    if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${SBINDIR}
         chmod 755 ${DESTDIR}${SBINDIR}
     fi
@@ -357,6 +368,8 @@ chmod 644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
 #
 # Remove and create the symbolic link to the init script
 #
+echo CONFDIR is $CONFDIR
+
 if [ -z "$DESTDIR" ]; then
     rm -f ${SHAREDIR}/shorewall-init/init
     ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/shorewall-init/init
@@ -366,14 +379,24 @@ if [ $HOST = debian ]; then
     if [ -n "${DESTDIR}" ]; then
 	mkdir -p ${DESTDIR}/etc/network/if-up.d/
 	mkdir -p ${DESTDIR}/etc/network/if-down.d/
+	mkdir -p ${DESTDIR}/etc/network/if-post-down.d/
+    elif [ $configure -eq 0 ]; then
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-post-down.d/
     fi
 
-    if [ ! -f ${DESTDIR}/etc/default/shorewall-init ]; then
+    if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
 	    mkdir ${DESTDIR}/etc/default
 	fi
 
-	install_file sysconfig ${DESTDIR}/etc/default/shorewall-init 0644
+	if [ $configure -eq 1 ]; then
+	    install_file sysconfig ${DESTDIR}/etc/default/shorewall-init 0644
+	else
+	    mkdir -p ${DESTDIR}${CONFDIR}/default
+	    install_file sysconfig ${DESTDIR}${CONFDIR}/default/shorewall-init 0644
+	fi
     fi
 
     IFUPDOWN=ifupdown.debian.sh
@@ -384,7 +407,7 @@ else
 	if [ -z "$RPM" ]; then
 	    if [ $HOST = suse ]; then
 		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-up.d
-		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d
+		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-down.d
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
@@ -415,17 +438,33 @@ mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
-    install_file ifupdown ${DESTDIR}/etc/NetworkManager/dispatcher.d/01-shorewall 0544
+    if [ $configure -eq 1 ]; then
+	install_file ifupdown ${DESTDIR}/etc/NetworkManager/dispatcher.d/01-shorewall 0544
+    else
+	mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
+	install_file ifupdown ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall 0544
+    fi
 fi
 
 case $HOST in
     debian)
-	install_file ifupdown ${DESTDIR}/etc/network/if-up.d/shorewall 0544
-	install_file ifupdown ${DESTDIR}/etc/network/if-down.d/shorewall 0544
-	install_file ifupdown ${DESTDIR}/etc/network/if-post-down.d/shorewall 0544
+	if [ $configure -eq 1 ]; then
+	    install_file ifupdown ${DESTDIR}/etc/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}/etc/network/if-down.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}/etc/network/if-post-down.d/shorewall 0544
+	else
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-down.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-post-down.d/shorewall 0544
+	fi
 	;;
     suse)
 	if [ -z "$RPM" ]; then
+	    if [ $configure -eq 0 ]; then
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-up.d/
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d/
+	    fi
+
 	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-up.d/shorewall 0544
 	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-down.d/shorewall 0544
 	fi
@@ -453,7 +492,7 @@ case $HOST in
 esac
 
 if [ -z "$DESTDIR" ]; then
-    if [ -n "$first_install" ]; then
+    if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian ]; then
 	    if mywhich insserv; then
 		if insserv ${INITDIR}/shorewall-init; then
@@ -505,7 +544,7 @@ if [ -z "$DESTDIR" ]; then
 	fi
     fi
 else
-    if [ -n "$first_install" ]; then
+    if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian ]; then
 	    if [ -n "${DESTDIR}" ]; then
 		mkdir -p ${DESTDIR}/etc/rcS.d

Shorewall-init/shorewall-init

@@ -63,18 +63,19 @@ shorewall_start () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
+      if [ -x ${STATEDIR}/firewall ]; then
           #
 	  # Run in a sub-shell to avoid name collisions
 	  #
 	  (
-	      if ! ${STATEDIR}/$PRODUCT/firewall status > /dev/null 2>&1; then
-		  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} stop || exit 1
+	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop || exit 1
 	      else
 		  exit 1
 	      fi
 	  )
       else
+          echo ERROR:  ${STATEDIR}/firewall does not exist or is not executable!
 	  exit 1
       fi
   done
@@ -95,8 +96,8 @@ shorewall_stop () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
-	  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} clear || exit 1
+      if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear || exit 1
       fi
   done
 

Shorewall-init/shorewall-init.service

@@ -1,12 +1,12 @@
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.4
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
 #
-#     Copyright 2011 Jonathan Underwood (jonathan.underwood@gmail.com)
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
-Description=Shorewall IPv4 firewall
-After=syslog.target
+Description=Shorewall IPv4 firewall (bootup security)
 Before=network.target
+Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot
@@ -17,4 +17,4 @@ ExecStart=/sbin/shorewall-init $OPTIONS start
 ExecStop=/sbin/shorewall-init $OPTIONS stop
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=basic.target

Shorewall-init/uninstall.sh

@@ -1,4 +1,4 @@
-\#!/bin/sh
+#!/bin/sh
 #
 # Script to back uninstall Shoreline Firewall
 #
@@ -69,6 +69,42 @@ remove_file() # $1 = file to restore
     fi
 }
 
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
 #
 # Read the RC file
 #
@@ -114,22 +150,29 @@ fi
 
 echo "Uninstalling Shorewall Init $VERSION"
 
+[ -n "$SANDBOX" ] && configure=0
+
 INITSCRIPT=${CONFDIR}/init.d/shorewall-init
 
 if [ -f "$INITSCRIPT" ]; then
-    if mywhich updaterc.d ; then
-	updaterc.d shorewall-init remove
-    elif mywhich insserv ; then
-        insserv -r $INITSCRIPT
-    elif mywhich chkconfig ; then
-	chkconfig --del $(basename $INITSCRIPT)
-    elif mywhich systemctl ; then
-	systemctl disable shorewall-init
+    if [ $configure -eq 1 ]; then
+	if mywhich updaterc.d ; then
+	    updaterc.d shorewall-init remove
+	elif mywhich insserv ; then
+            insserv -r $INITSCRIPT
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $INITSCRIPT)
+	fi
     fi
 
     remove_file $INITSCRIPT
 fi
 
+if [ -n "$SYSTEMD" ]; then
+    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
+    rm -f $SYSTEMD/shorewall-init.service
+fi
+
 [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
 [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
 
@@ -159,8 +202,9 @@ if [ -d ${CONFDIR}/ppp ]; then
     done
 fi
 
+rm -f  ${SBINDIR}/shorewall-init
 rm -rf ${SHAREDIR}/shorewall-init
-rm -rf ${LIBEXEC}/shorewall-init
+rm -rf ${LIBEXECDIR}/shorewall-init
 
 echo "Shorewall Init Uninstalled"
 

Shorewall-lite/install.sh

@@ -30,6 +30,7 @@ usage() # $1 = exit status
     echo "usage: $ME [ <configuration-file> ]"
     echo "       $ME -v"
     echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
@@ -113,9 +114,13 @@ fi
 # Parse the run line
 #
 finished=0
+configure=1
 
 while [ $finished -eq 0 ] ; do
-    case "$1" in
+
+    option=$1
+
+    case "$option" in
 	-*)
 	    option=${option#-}
 
@@ -128,6 +133,10 @@ while [ $finished -eq 0 ] ; do
 			echo "$Product Firewall Installer Version $VERSION"
 			exit 0
 			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
 		    *)
 			usage 1
 			;;
@@ -186,6 +195,8 @@ done
 
 PATH=${SBINDIR}:/bin:/usr${SBINDIR}:/usr/bin:/usr/local/bin:/usr/local${SBINDIR}
 
+[ -n "$SANDBOX" ] && configure=0
+
 #
 # Determine where to install the firewall script
 #
@@ -195,7 +206,7 @@ T='-T'
 
 if [ -z "$BUILD" ]; then
     case $(uname) in
-	cygwin*)
+	cygwin*|CYGWIN*)
 	    BUILD=cygwin
 	    ;;
 	Darwin)
@@ -206,7 +217,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID)
 
 		case $ID in
-		    fedora)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian)
@@ -242,7 +253,7 @@ if [ -z "$BUILD" ]; then
 fi
 
 case $BUILD in
-    cygwin*)
+    cygwin*|CYGWIN*)
 	OWNER=$(id -un)
 	GROUP=$(id -gn)
 	;;
@@ -346,6 +357,7 @@ fi
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
 install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
+[ -n "${INITFILE}" ] && install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
 
 echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
 
@@ -358,7 +370,7 @@ mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${VARDIR}
 
 chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
-chmod 755 ${DESTDIR}/usr/share/$PRODUCT
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
 
 if [ -n "$DESTDIR" ]; then
     mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
@@ -383,7 +395,7 @@ fi
 if [ -n "$SYSTEMD" ]; then
     mkdir -p ${DESTDIR}${SYSTEMD}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 600 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
 fi
@@ -466,18 +478,18 @@ done
 if [ -d manpages ]; then
     cd manpages
 
-    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${SHAREDIR}/man/man5/ ${DESTDIR}${SHAREDIR}/man/man8/
+    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
 
     for f in *.5; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${SHAREDIR}/man/man5/$f.gz
-	echo "Man page $f.gz installed to ${DESTDIR}${SHAREDIR}/man/man5/$f.gz"
+	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
     for f in *.8; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${SHAREDIR}/man/man8/$f.gz
-	echo "Man page $f.gz installed to ${DESTDIR}${SHAREDIR}/man/man8/$f.gz"
+	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
     cd ..
@@ -499,7 +511,7 @@ chmod 644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 # Remove and create the symbolic link to the init script
 #
 
-if [ -z "$DESTDIR" ]; then
+if [ -z "${DESTDIR}" -a -n "${INITFILE}" ]; then
     rm -f ${SHAREDIR}/$PRODUCT/init
     ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
 fi
@@ -526,7 +538,7 @@ if [ ${SHAREDIR} != /usr/share ]; then
     eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SBINDIR}/$PRODUCT
 fi
 
-if [ -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
+if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
     if [ -n "$SYSTEMD" ]; then
 	if systemctl enable ${PRODUCT}.service; then
 	    echo "$Product will start automatically at boot"

Shorewall-lite/manpages/shorewall-lite-vardir.xml

@@ -6,6 +6,8 @@
     <refentrytitle>shorewall-lite-vardir</refentrytitle>
 
     <manvolnum>5</manvolnum>
+
+    <refmiscinfo>Configuration Files</refmiscinfo>
   </refmeta>
 
   <refnamediv>
@@ -54,7 +56,7 @@
         /opt/var/lib/shorewall-lite/.</para>
       </blockquote>
 
-      <para> When VARDIR is set in /etc/shorewall-lite/vardir, Shorewall Lite
+      <para>When VARDIR is set in /etc/shorewall-lite/vardir, Shorewall Lite
       will save its state in the <replaceable>directory</replaceable>
       specified.</para>
     </note>

Shorewall-lite/manpages/shorewall-lite.conf.xml

@@ -6,6 +6,8 @@
     <refentrytitle>shorewall-lite.conf</refentrytitle>
 
     <manvolnum>5</manvolnum>
+
+    <refmiscinfo>Configuration Files</refmiscinfo>
   </refmeta>
 
   <refnamediv>

Shorewall-lite/manpages/shorewall-lite.xml

@@ -6,6 +6,8 @@
     <refentrytitle>shorewall-lite</refentrytitle>
 
     <manvolnum>8</manvolnum>
+
+    <refmiscinfo>Administrative Commands</refmiscinfo>
   </refmeta>
 
   <refnamediv>
@@ -315,6 +317,21 @@
       <arg><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>run</option></arg>
+
+      <arg choice="plain">function</arg>
+
+      <arg><replaceable>parameter ...</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -350,6 +367,20 @@
       rep="repeat"><replaceable>chain</replaceable></arg></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="opt"><option>show | list | ls </option></arg>
+
+      <arg><option>-x</option></arg>
+
+      <arg choice="plain"><option>{bl|blacklists}</option></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -463,7 +494,8 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>status</option></arg>
+      <arg choice="plain"><arg
+      choice="plain"><option>status</option><arg><option>-i</option></arg></arg></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -805,6 +837,23 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">run</emphasis></term>
+
+        <listitem>
+          <para>Added in Shorewall 4.6.3. Executes
+          <replaceable>command</replaceable> in the context of the generated
+          script passing the supplied <replaceable>parameter</replaceable>s.
+          Normally, the <replaceable>command</replaceable> will be a function
+          declared in <filename>lib.private</filename>.</para>
+
+          <para>Before executing the <replaceable>command</replaceable>, the
+          script will detect the configuration, setting all SW_* variables and
+          will run your <filename>init</filename> extension script with
+          $COMMAND = 'run'.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">save</emphasis></term>
 
@@ -827,6 +876,19 @@
           arguments:</para>
 
           <variablelist>
+            <varlistentry>
+              <term><emphasis role="bold">bl|blacklists</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 4.6.2. Displays the dynamic chain
+                along with any chains produced by entries in
+                shorewall-blrules(5).The <emphasis role="bold">-x</emphasis>
+                option is passed directly through to iptables and causes
+                actual packet and byte counts to be displayed. Without this
+                option, those counts are abbreviated.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">capabilities</emphasis></term>
 
@@ -1071,6 +1133,10 @@
         <listitem>
           <para>Produces a short report about the state of the
           Shorewall-configured firewall.</para>
+
+          <para>The <option>-i </option>option was added in Shorewall 4.6.2
+          and causes the status of each optional or provider interface to be
+          displayed.</para>
         </listitem>
       </varlistentry>
 

Shorewall-lite/shorewall-lite.service

@@ -1,12 +1,12 @@
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.4
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
 #
-#     Copyright 2011 Jonathan Underwood (jonathan.underwood@gmail.com)
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
 Description=Shorewall IPv4 firewall (lite)
-After=syslog.target
 After=network.target
+Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot
@@ -17,4 +17,4 @@ ExecStart=/sbin/shorewall-lite $OPTIONS start
 ExecStop=/sbin/shorewall-lite $OPTIONS stop
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=basic.target

Shorewall-lite/uninstall.sh

@@ -27,11 +27,16 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx  #The Build script inserts the actual version
+PRODUCT=shorewall-lite
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <shorewallrc file> ]"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
     exit $1
 }
 
@@ -69,6 +74,42 @@ remove_file() # $1 = file to restore
     fi
 }
 
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
 #
 # Read the RC file
 #
@@ -112,8 +153,12 @@ fi
 
 echo "Uninstalling Shorewall Lite $VERSION"
 
-if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
-   shorewall-lite clear
+[ -n "$SANDBOX" ] && configure=0
+
+if [ $configure -eq 1 ]; then
+    if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
+	shorewall-lite clear
+    fi
 fi
 
 if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
@@ -123,28 +168,34 @@ elif [ -n "$INITFILE" ]; then
 fi
 
 if [ -f "$FIREWALL" ]; then
-    if mywhich updaterc.d ; then
-	updaterc.d shorewall-lite remove
-    elif mywhich insserv ; then
-        insserv -r $FIREWALL
-    elif [ mywhich chkconfig ; then
-	chkconfig --del $(basename $FIREWALL)
-    elif mywhich systemctl ; then
-	systemctl disable shorewall-lite
+    if [ $configure -eq 1 ]; then
+	if mywhich updaterc.d ; then
+	    updaterc.d shorewall-lite remove
+	elif mywhich insserv ; then
+            insserv -r $FIREWALL
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $FIREWALL)
+	fi
     fi
 
     remove_file $FIREWALL
 fi
 
+if [ -n "$SYSTEMD" ]; then
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
+    rm -f $SYSTEMD/shorewall-lite.service
+fi
+
 rm -f ${SBINDIR}/shorewall-lite
 
-rm -rf ${SBINDIR}/shorewall-lite
+rm -rf ${CONFDIR}/shorewall-lite
 rm -rf ${VARDIR}/shorewall-lite
 rm -rf ${SHAREDIR}/shorewall-lite
-rm -rf ${LIBEXEC}/shorewall-lite
+rm -rf ${LIBEXECDIR}/shorewall-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
-[ -n "$SYSTEMD" ] && rm -f  ${SYSTEMD}/shorewall-lite.service
+
+rm -f ${MANDIR}/man5/shorewall-lite*
+rm -f ${MANDIR}/man8/shorewall-lite*
 
 echo "Shorewall Lite Uninstalled"
 
-

Shorewall/Macros/macro.AMQP

@@ -0,0 +1,14 @@
+#
+# Shorewall version 4 - AMQP Macro
+#
+# /usr/share/shorewall/macro.AMQP
+#
+#	This macro handles AMQP traffic.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	5672
+PARAM	-	-	udp	5672

Shorewall/Macros/macro.A_AllowICMPs

@@ -1,13 +1,15 @@
 #
 # Shorewall version 4 - Audited AllowICMPs Macro
 #
-# /usr/share/shorewall/macro.AAllowICMPs
+# /usr/share/shorewall/macro.A_AllowICMPs
 #
 #	This macro A_ACCEPTs needed ICMP types
 #
 ###############################################################################
-#ACTION		SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#					PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION		SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#					PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Needed ICMP types
 

Shorewall/Macros/macro.A_DropDNSrep

@@ -1,13 +1,15 @@
 #
 # Shorewall version 4 - Audited DropDNSrep Macro
 #
-# /usr/share/shorewall/macro.ADropDNSrep
+# /usr/share/shorewall/macro.A_DropDNSrep
 #
 #	This macro silently audites and drops DNS UDP replies
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Late DNS Replies
 

Shorewall/Macros/macro.A_DropUPnP

@@ -1,13 +1,15 @@
 #
 # Shorewall version 4 - ADropUPnP Macro
 #
-# /usr/share/shorewall/macro.ADropUPnP
+# /usr/share/shorewall/macro.A_DropUPnP
 #
 #	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT UPnP
 

Shorewall/Macros/macro.AllowICMPs

@@ -6,8 +6,10 @@
 #	This macro ACCEPTs needed ICMP types
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Needed ICMP types
 

Shorewall/Macros/macro.Amanda

@@ -9,11 +9,12 @@
 #
 ###############################################################################
 ?FORMAT 2
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __AMANDA_HELPER )
- PARAM	-	-	udp	10080 ; helper=amanda
+ PARAM	-	-	udp	10080 { helper=amanda }
 ?else
  PARAM	-	-	udp	10080
 ?endif

Shorewall/Macros/macro.Auth

@@ -6,6 +6,8 @@
 #	This macro handles Auth (identd) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	113

Shorewall/Macros/macro.BGP

@@ -6,6 +6,8 @@
 #	This macro handles BGP4 traffic.
 #
 ###############################################################################
-#ACTION SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S) PORT(S) LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	179	# BGP4

Shorewall/Macros/macro.BLACKLIST

@@ -6,8 +6,10 @@
 #	This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if $BLACKLIST_LOGLEVEL
 blacklog
 ?else

Shorewall/Macros/macro.BitTorrent

@@ -7,9 +7,12 @@
 #
 #	If you are running BitTorrent 3.2 or later, you should use the
 #	BitTorrent32 macro.
+#
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6889
 #
 # It may also be necessary to allow UDP traffic:

Shorewall/Macros/macro.BitTorrent32

@@ -6,8 +6,10 @@
 #	This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6999
 #
 # It may also be necessary to allow UDP traffic:

Shorewall/Macros/macro.CVS

@@ -6,6 +6,8 @@
 #	This macro handles connections to the CVS pserver.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2401

Shorewall/Macros/macro.Citrix

@@ -6,9 +6,11 @@
 #	This macro handles Citrix/ICA traffic (ICA, ICA Browser, CGP a.k.a.
 #	ICA Session Reliability)
 #
-####################################################################################
-#ACTION SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S) PORT(S) LIMIT	GROUP
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1494	# ICA
 PARAM	-	-	udp	1604	# ICA Browser
 PARAM	-	-	tcp	2598	# CGP Session Reliabilty

Shorewall/Macros/macro.DAAP

@@ -7,7 +7,9 @@
 #	The protocol is used by iTunes, Rythmbox and other similar daemons.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3689
 PARAM	-	-	udp	3689

Shorewall/Macros/macro.DCC

@@ -7,6 +7,8 @@
 #	DCC is a distributed spam filtering mechanism.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	6277

Shorewall/Macros/macro.DHCPfwd

@@ -6,7 +6,9 @@
 #	This macro (bidirectional) handles forwarded DHCP traffic
 #
 ###############################################################################
-#ACTION SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S) PORT(S) LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	67:68	67:68	# DHCP
 PARAM	DEST	SOURCE	udp	67:68	67:68	# DHCP

Shorewall/Macros/macro.DNS

@@ -6,7 +6,9 @@
 #	This macro handles DNS traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	53
 PARAM	-	-	tcp	53

Shorewall/Macros/macro.Distcc

@@ -6,6 +6,8 @@
 #	This macro handles connections to the Distributed Compiler service.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3632

Shorewall/Macros/macro.Drop

@@ -11,12 +11,14 @@
 #		Drop	net	all
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 #
-# Don't log 'auth' REJECT
+# Don't log 'auth' DROP
 #
-REJECT	-	-	tcp	113
+DROP	-	-	tcp	113
 #
 # Drop Broadcasts so they don't clutter up the log
 # (broadcasts must *not* be rejected).

Shorewall/Macros/macro.DropDNSrep

@@ -6,8 +6,10 @@
 #	This macro silently drops DNS UDP replies
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Late DNS Replies
 

Shorewall/Macros/macro.DropUPnP

@@ -6,8 +6,10 @@
 #	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT UPnP
 

Shorewall/Macros/macro.Edonkey

@@ -28,7 +28,9 @@
 #	applications such as aMule WebServer or aMuleCMD.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	4662
 PARAM	-	-	udp	4665

Shorewall/Macros/macro.FTP

@@ -7,10 +7,11 @@
 #
 ###############################################################################
 ?FORMAT 2
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __FTP_HELPER  )
- PARAM	-	-	tcp	21 ; helper=ftp
+ PARAM	-	-	tcp	21 { helper=ftp }
 ?else
  PARAM	-	-	tcp	21
 ?endif

Shorewall/Macros/macro.Finger

@@ -7,6 +7,8 @@
 #	your finger information to internet.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	79

Shorewall/Macros/macro.GNUnet

@@ -6,8 +6,10 @@
 #	This macro handles GNUnet (secure peer-to-peer networking) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2086
 PARAM	-	-	udp	2086
 PARAM	-	-	tcp	1080

Shorewall/Macros/macro.GRE

@@ -7,7 +7,9 @@
 #	traffic (RFC 1701)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	47	# GRE
 PARAM	DEST	SOURCE	47	# GRE

Shorewall/Macros/macro.Git

@@ -6,6 +6,8 @@
 #	This macro handles Git traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9418

Shorewall/Macros/macro.Gnutella

@@ -6,7 +6,9 @@
 #	This macro handles Gnutella traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6346
 PARAM	-	-	udp	6346

Shorewall/Macros/macro.Goto-Meeting

@@ -0,0 +1,12 @@
+#
+# Shorewall version 4 - Citrix/Goto Meeting macro
+#
+# /usr/share/shorewall/macro.Goto-Meeting
+#          by Eric Teeter
+#       This macro handles Citrix/Goto Meeting
+#       Assumes that ports 80 and 443 are already open
+#       If needed, use the macros that open Http and Https to reduce redundancy
+####################################################################################
+#ACTION	   SOURCE	DEST    PROTO   DEST    SOURCE  RATE    USER/
+#                                       PORT(S) PORT(S) LIMIT   GROUP
+PARAM      -         	-       tcp     8200    # Goto Meeting only needed (TCP outbound)

Shorewall/Macros/macro.HKP

@@ -6,6 +6,8 @@
 #	This macro handles OpenPGP HTTP keyserver protocol traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	11371

Shorewall/Macros/macro.HTTP

@@ -6,6 +6,8 @@
 #	This macro handles plaintext HTTP (WWW) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	80

Shorewall/Macros/macro.HTTPS

@@ -6,6 +6,8 @@
 #	This macro handles HTTPS (WWW over SSL) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	443

Shorewall/Macros/macro.ICPV2

@@ -6,6 +6,8 @@
 #	This macro handles Internet Cache Protocol V2 (Squid) traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	3130

Shorewall/Macros/macro.ICQ

@@ -6,6 +6,8 @@
 #	This macro handles ICQ, now called AOL Instant Messenger (or AIM).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5190

Shorewall/Macros/macro.ILO

@@ -0,0 +1,23 @@
+#
+# Shorewall version 4 - ILO Macro
+#
+# /usr/share/shorewall/macro.ILO
+#
+#	This macro handles console redirection with HP ILO 2+,
+#	Use this macro to open access to your ILO interface from management
+#	workstations.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	3002		# Raw serial data
+PARAM	-	-	tcp	9300		# Shared Remote Console
+PARAM	-	-	tcp	17988		# Virtual Media
+PARAM	-	-	tcp	17990		# Console Replay
+HTTP
+HTTPS
+RDP
+SSH
+Telnet						# Remote Console/Telnet

Shorewall/Macros/macro.IMAP

@@ -7,6 +7,8 @@
 #	see macro.IMAPS.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	143

Shorewall/Macros/macro.IMAPS

@@ -7,6 +7,8 @@
 #	(not recommended), see macro.IMAP.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	993

Shorewall/Macros/macro.IPIP

@@ -6,7 +6,9 @@
 #	This macro (bidirectional) handles IPIP capsulation traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	94	# IPIP
 PARAM	DEST	SOURCE	94	# IPIP

Shorewall/Macros/macro.IPMI

@@ -0,0 +1,26 @@
+#
+# Shorewall version 4 - IPMI Macro
+#
+# /usr/share/shorewall/macro.IPMI
+#
+#	This macro handles IPMI console redirection with Asus (AMI),
+#	Dell DRAC5+ (Avocent), and Supermicro (Aten or AMI).
+#	Use this macro to open access to your IPMI interface from management
+#	workstations.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	623		# RMCP
+PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
+PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)
+PARAM	-	-	tcp	5900,5901	# Remote Console (Aten, Dell)
+PARAM	-	-	tcp	7578		# Remote Console (AMI)
+PARAM	-	-	udp	623		# RMCP
+HTTP
+HTTPS
+SNMP
+SSH						# Serial over Lan
+Telnet

Shorewall/Macros/macro.IPP

@@ -6,6 +6,8 @@
 #	This macro handles Internet Printing Protocol (IPP).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	631

Shorewall/Macros/macro.IPPbrd

@@ -6,7 +6,10 @@
 #	This macro handles Internet Printing Protocol (IPP) broadcasts.
 #       If you also need to handle TCP 631 connections in the opposite
 #       direction, use the IPPserver Macro
+#
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	631

Shorewall/Macros/macro.IPPserver

@@ -23,7 +23,9 @@
 #		IPPserver/ACCEPT $FW loc
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	SOURCE	DEST	tcp	631
 PARAM	DEST	SOURCE	udp	631

Shorewall/Macros/macro.IPsec

@@ -6,8 +6,10 @@
 #	This macro (bidirectional) handles IPsec traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	50			# ESP
 PARAM	DEST	SOURCE	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecah

@@ -7,8 +7,10 @@
 #       This is insecure. You should use ESP with encryption for security.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	51			# AH
 PARAM	DEST	SOURCE	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecnat

@@ -6,8 +6,10 @@
 #	This macro (bidirectional) handles IPsec traffic and Nat-Traversal
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	# IKE
 PARAM	-	-	udp	4500	# NAT-T
 PARAM	-	-	50		# ESP

Shorewall/Macros/macro.IRC

@@ -7,11 +7,12 @@
 #
 ###############################################################################
 ?FORMAT 2
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __IRC_HELPER  )
- PARAM	-	-	tcp	6667 ; helper=irc
+ PARAM	-	-	tcp	6667 { helper=irc }
 ?else
  PARAM	-	-	tcp	6667
 ?endif

Shorewall/Macros/macro.JAP

@@ -8,8 +8,10 @@
 #	to browse anonymously!
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	8080 # HTTP port
 PARAM	-	-	tcp	6544 # HTTP port
 PARAM	-	-	tcp	6543 # InfoService port

Shorewall/Macros/macro.JabberPlain

@@ -6,6 +6,8 @@
 #	This macro accepts Jabber traffic (plaintext).
 #
 ###############################################################################
-#TARGET	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5222

Shorewall/Macros/macro.JabberSecure

@@ -6,6 +6,8 @@
 #	This macro accepts Jabber traffic (ssl).
 #
 ###############################################################################
-#TARGET	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5223

Shorewall/Macros/macro.Jabberd

@@ -6,6 +6,8 @@
 #	This macro accepts Jabberd intercommunication traffic
 #
 ###############################################################################
-#TARGET	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5269

Shorewall/Macros/macro.Jetdirect

@@ -6,6 +6,8 @@
 #	This macro handles HP Jetdirect printing.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9100

Shorewall/Macros/macro.Kerberos

@@ -6,7 +6,9 @@
 #	This macro handles Kerberos traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	88
 PARAM	-	-	udp	88

Shorewall/Macros/macro.L2TP

@@ -7,7 +7,9 @@
 #	(RFC 2661)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	1701	# L2TP
 PARAM	DEST	SOURCE	udp	1701	# L2TP

Shorewall/Macros/macro.LDAP

@@ -11,6 +11,8 @@
 #	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	389

Shorewall/Macros/macro.LDAPS

@@ -11,6 +11,8 @@
 #	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	636

Shorewall/Macros/macro.MSNP

@@ -6,6 +6,8 @@
 #	This macro handles MSNP (MicroSoft Notification Protocol)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1863

Shorewall/Macros/macro.MSSQL

@@ -6,6 +6,8 @@
 #	This macro handles MSSQL (Microsoft SQL Server)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1433

Shorewall/Macros/macro.Mail

@@ -12,8 +12,10 @@
 #	the POP3 or IMAP macros.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	25
 PARAM	-	-	tcp	465
 PARAM	-	-	tcp	587

Shorewall/Macros/macro.MongoDB

@@ -0,0 +1,13 @@
+#
+# Shorewall version 4 - MongoDB Macro
+#
+# /usr/share/shorewall/macro.MongoDB
+#
+#	This macro handles MongoDB Daemon/Router traffic.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	27017

Shorewall/Macros/macro.Munin

@@ -6,6 +6,8 @@
 #	This macro handles Munin networked resource monitoring traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	4949

Shorewall/Macros/macro.MySQL

@@ -6,6 +6,8 @@
 #	This macro handles connections to the MySQL server.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3306

Shorewall/Macros/macro.NNTP

@@ -7,6 +7,8 @@
 #	encrypted NNTP, see macro.NNTPS.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	119

Shorewall/Macros/macro.NNTPS

@@ -7,6 +7,8 @@
 #	plaintext NNTP, see macro.NNTP.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	563

Shorewall/Macros/macro.NTP

@@ -7,6 +7,8 @@
 #	For broadcast NTP traffic, use NTPbrd Macro.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	123

Shorewall/Macros/macro.NTPbi

@@ -6,7 +6,9 @@
 #        This macro handles  bi-directional NTP (for NTP peers)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	123
 PARAM	DEST	SOURCE	udp	123

Shorewall/Macros/macro.NTPbrd

@@ -11,7 +11,9 @@
 #	Netfilter doesn't track connections for broadcast traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-		-		udp	123
 PARAM	-		-		udp	1024:	123

Shorewall/Macros/macro.OSPF

@@ -6,6 +6,8 @@
 #	This macro handles OSPF multicast traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	89	# OSPF

Shorewall/Macros/macro.OpenVPN

@@ -6,6 +6,8 @@
 #	This macro handles OpenVPN traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	1194

Shorewall/Macros/macro.PCA

@@ -6,7 +6,9 @@
 #	This macro handles PCAnywere (tm)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	5632
 PARAM	-	-	tcp	5631

Shorewall/Macros/macro.POP3

@@ -7,6 +7,8 @@
 #	see macro.POP3S.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	110

Shorewall/Macros/macro.POP3S

@@ -7,6 +7,8 @@
 #	see macro.POP3.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	995	# Secure POP3

Shorewall/Macros/macro.PPtP

@@ -7,13 +7,14 @@
 #
 ###############################################################################
 ?FORMAT 2
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	47
 PARAM	DEST	SOURCE	47
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __PPTP_HELPER )
- PARAM	-	-	tcp	1723 ; helper=pptp
+ PARAM	-	-	tcp	1723 { helper=pptp }
 ?else
  PARAM	-	-	tcp	1723
 ?endif

Shorewall/Macros/macro.Ping

@@ -6,6 +6,8 @@
 #	This macro handles 'ping' requests.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	icmp	8

Shorewall/Macros/macro.PostgreSQL

@@ -6,6 +6,8 @@
 #	This macro handles connections to the PostgreSQL server.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5432

Shorewall/Macros/macro.Printer

@@ -6,6 +6,8 @@
 #	This macro handles Line Printer protocol printing.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	515

Shorewall/Macros/macro.Puppet

@@ -7,6 +7,8 @@
 #	management system.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	8140

Shorewall/Macros/macro.RDP

@@ -6,6 +6,8 @@
 #	This macro handles Microsoft RDP (Remote Desktop) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3389

Shorewall/Macros/macro.RIPbi

@@ -6,8 +6,9 @@
 #        This macro handles RIP (Routing Information Protocol) - bidirectional
 #
 ###############################################################################
-#ACTION SOURCE  DEST    PROTO   DEST    SOURCE  RATE    USER/
-#                               PORT(S) PORT(S) LIMIT   GROUP
-PARAM   -       -       udp	520
-PARAM   DEST    SOURCE  udp	520
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	udp	520
+PARAM	DEST	SOURCE	udp	520

Shorewall/Macros/macro.RNDC

@@ -6,6 +6,8 @@
 #	This macro handles RNDC (BIND remote management protocol) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	953

Shorewall/Macros/macro.Razor

@@ -6,6 +6,8 @@
 #	This macro handles traffic for the Razor Antispam System
 #
 ###############################################################################
-#ACTION         SOURCE          DEST    PROTO   DEST    SOURCE  RATE    USER/
-#                                               PORT(S) PORT(S) LIMIT   GROUP
-ACCEPT          -               -       tcp     2703
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+ACCEPT	-	-	tcp	2703

Shorewall/Macros/macro.Rdate

@@ -10,6 +10,8 @@
 #	use Time macro instead.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	37

Shorewall/Macros/macro.Redis

@@ -0,0 +1,13 @@
+#
+# Shorewall version 4 - Redis Macro
+#
+# /usr/share/shorewall/macro.Redis
+#
+#	This macro handles Redis traffic.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	6379

Shorewall/Macros/macro.Reject

@@ -12,8 +12,10 @@
 #
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 #
 # Don't log 'auth' REJECT
 #