Apply Matt Darfeuille's fix for fatal_error()

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -98,7 +98,7 @@ if [ -z "$vendor" ]; then
 	eval $(cat /etc/os-release | grep ^ID=)
 
 	case $ID in
-	    fedora)
+	    fedora|rhel)
 		vendor=redhat
 		;;
 	    debian|ubuntu)
@@ -195,6 +195,10 @@ elif [ -n "${options[VARDIR]}" ]; then
     fi
 fi
 
+if [ -z "${options[SERVICEDIR]}" ]; then
+    options[SERVICEDIR]="${options[SYSTEMD]}"
+fi
+
 for on in \
     HOST \
     PREFIX \
@@ -209,7 +213,7 @@ for on in \
     INITFILE \
     AUXINITSOURCE \
     AUXINITFILE \
-    SYSTEMD \
+    SERVICEDIR \
     SERVICEFILE \
     SYSCONFFILE \
     SYSCONFDIR \

Shorewall-core/configure.pl

@@ -64,7 +64,7 @@ unless ( defined $vendor ) {
 
 	$id =~ s/ID=//;
 	
-	if ( $id eq 'fedora' ) {
+	if ( $id eq 'fedora' || $id eq 'rhel' ) {
 	    $vendor = 'redhat';
 	} elsif ( $id eq 'opensuse' ) {
 	    $vendor = 'suse';
@@ -100,7 +100,7 @@ if ( defined $vendor ) {
     } elsif ( `uname` =~ '^Darwin' ) {
 	$vendor = 'apple';
 	$rcfilename = 'shorewallrc.apple';
-    } elsif ( `uname` =~ '^Cygwin' ) {
+    } elsif ( `uname` =~ /^Cygwin/i ) {
 	$vendor = 'cygwin';
 	$rcfilename = 'shorewallrc.cygwin';
     } else {
@@ -154,6 +154,8 @@ if ( $options{VARLIB} ) {
     $options{VARDIR} = '${VARLIB}/${PRODUCT}';
 }
 
+$options{SERVICEDIR}=$options{SYSTEMD} unless $options{SERVICEDIR};
+
 for ( qw/ HOST
 	  PREFIX
 	  SHAREDIR
@@ -167,8 +169,8 @@ for ( qw/ HOST
 	  INITFILE
 	  AUXINITSOURCE
 	  AUXINITFILE
-	  SYSTEMD
-          SERVICEFILE
+	  SERVICEDIR
+	  SERVICEFILE
 	  SYSCONFFILE
 	  SYSCONFDIR
 	  SPARSE

Shorewall-core/install.sh

@@ -187,7 +187,7 @@ INSTALLD='-D'
 
 if [ -z "$BUILD" ]; then
     case $(uname) in
-	cygwin*)
+	cygwin*|CYGWIN*)
 	    BUILD=cygwin
 	    ;;
 	Darwin)
@@ -198,7 +198,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID)
 
 		case $ID in
-		    fedora)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian)
@@ -329,9 +329,13 @@ if [ -n "${SYSCONFDIR}" ]; then
     chmod 755 ${DESTDIR}${SYSCONFDIR}
 fi
 
-if [ -n "${SYSTEMD}" ]; then
-    mkdir -p ${DESTDIR}${SYSTEMD}
-    chmod 755 ${DESTDIR}${SYSTEMD}
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+if [ -n "${SERVICEDIR}" ]; then
+    mkdir -p ${DESTDIR}${SERVICEDIR}
+    chmod 755 ${DESTDIR}${SERVICEDIR}
 fi
 
 mkdir -p ${DESTDIR}${SBINDIR}

Shorewall-core/lib.cli

@@ -25,7 +25,7 @@
 # loaded after this one and replaces some of the functions declared here.
 #
 
-SHOREWALL_CAPVERSION=40600
+SHOREWALL_CAPVERSION=40606
 
 [ -n "${g_program:=shorewall}" ]
 
@@ -252,7 +252,15 @@ show_classifiers() {
 
 	if [ -n "$qdisc" ]; then
 	    echo Device $device:
-	    tc -s filter ls dev $device
+	    qt tc -s filter ls root dev $device && tc -s filter ls root dev $device | grep -v '^$'
+	    tc filter show dev $device
+	    tc class show dev $device | fgrep 'leaf ' | fgrep -v ' hfsc' | sed 's/^.*leaf //;s/ .*//' | while read class; do
+		if [ -n "$class" ]; then
+		    echo
+		    echo Node $class
+		    tc filter show dev $device parent $class
+		fi
+	    done
 	    echo
 	fi
     }
@@ -263,6 +271,19 @@ show_classifiers() {
 
 }
 
+#
+# Display blacklist chains
+#
+show_bl() {
+    $g_tool -L $g_ipt_options | \
+	awk 'BEGIN           {prnt=0; };
+            /^$/             {if (prnt == 1) print ""; prnt=0; };
+            /Chain .*~ /     {prnt=1; };
+            /Chain dynamic / {prnt=1; };
+            {if (prnt == 1)  print; };
+            END {if (prnt == 1 ) print "" };'
+}
+
 #
 # Watch the Firewall Log
 #
@@ -346,6 +367,28 @@ resolve_arptables() {
     esac
 }
 
+#
+# Try to run the 'savesets' command
+#
+savesets() {
+    local supported
+
+    supported=$(run_it ${VARDIR}/firewall help | fgrep savesets )
+
+    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${g_restorepath}-ipsets 
+}
+
+#
+# Proactive save of the current ipset contents
+#
+savesets1() {
+    local supported
+
+    supported=$(run_it ${VARDIR}/firewall help | fgrep savesets )
+
+    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${VARDIR}/ipsets.save && progress_message3 "The ipsets have been saved to ${VARDIR}/ipsets.save"
+}
+
 #
 # Save currently running configuration
 #
@@ -355,7 +398,7 @@ do_save() {
     status=0
 
     if [ -f ${VARDIR}/firewall ]; then
-	if $iptables_save | iptablesbug > ${VARDIR}/restore-$$; then
+	if $iptables_save | iptablesbug | grep -v -- '-A dynamic.* -j ACCEPT' > ${VARDIR}/restore-$$; then
 	    cp -f ${VARDIR}/firewall $g_restorepath
 	    mv -f ${VARDIR}/restore-$$ ${g_restorepath}-iptables
 	    chmod +x $g_restorepath
@@ -407,45 +450,47 @@ do_save() {
 	    ;;
     esac
 
-    case ${SAVE_IPSETS:=No} in
-	[Yy]es)
-	    case ${IPSET:=ipset} in
-		*/*)
-		    if [ ! -x "$IPSET" ]; then
-			error_message "ERROR: IPSET=$IPSET does not exist or is not executable - ipsets are not saved"
-			IPSET=
+    if ! savesets;  then
+	case ${SAVE_IPSETS:=No} in
+	    [Yy]es)
+		case ${IPSET:=ipset} in
+		    */*)
+			if [ ! -x "$IPSET" ]; then
+			    error_message "ERROR: IPSET=$IPSET does not exist or is not executable - ipsets are not saved"
+			    IPSET=
+			fi
+			;;
+		    *)
+			IPSET="$(mywhich $IPSET)"
+			[ -n "$IPSET" ] || error_message "ERROR: The ipset utility cannot be located - ipsets are not saved"
+			;;
+		esac
+
+		if [ -n "$IPSET" ]; then
+		    if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then
+			#
+			# The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny
+			#
+			hack='| grep -v /31'
+		    else
+			hack=
 		    fi
-		    ;;
-		*)
-		    IPSET="$(mywhich $IPSET)"
-		    [ -n "$IPSET" ] || error_message "ERROR: The ipset utility cannot be located - ipsets are not saved"
-		    ;;
-	    esac
 
-	    if [ -n "$IPSET" ]; then
-		if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then
-                    #
-                    # The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny
-                    #
-		    hack='| grep -v /31'
-		else
-		    hack=
+		    if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then
+			#
+			# Don't save an 'empty' file
+			#
+			grep -qE -- '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${g_restorepath}-ipsets
+		    fi
 		fi
-
-		if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then
-                    #
-                    # Don't save an 'empty' file
-                    #
-		    grep -qE -- '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${g_restorepath}-ipsets
-		fi
-	    fi
-	    ;;
-	[Nn]o)
-	    ;;
-	*)
-	    error_message "WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS"
-	    ;;
-    esac
+		;;
+	    [Nn]o)
+		;;
+	    *)
+		error_message "WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS"
+		;;
+	esac
+    fi
 
     return $status
 }
@@ -459,6 +504,8 @@ save_config() {
 
     [ -x $iptables_save ] || echo "$iptables-save does not exist or is not executable" >&2
 
+    [ -n "$g_counters" ] && iptables_save="$iptables_save --counters"
+
     if product_is_started ; then
 	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}
 
@@ -1181,7 +1228,23 @@ show_command() {
 	    echo "$g_product $SHOREWALL_VERSION events at $g_hostname - $(date)"
 	    echo
 	    show_events
-	    ;;	    
+	    ;;
+	bl|blacklists)
+	    [ $# -gt 1 ] && usage 1
+	    echo "$g_product $SHOREWALL_VERSION blacklist chains at $g_hostname - $(date)"
+	    echo
+	    show_bl;
+	    ;;
+	opens)
+	    [ $# -gt 1 ] && usage 1
+	    echo "$g_product $SHOREWALL_VERSION Temporarily opened connections at $g_hostname - $(date)"
+
+	    if chain_exists dynamic; then
+		g_ipt_options="$g_ipt_options --line-numbers"
+		$g_tool -t filter -L dynamic $g_ipt_options  | head -n2
+		$g_tool -t filter -L dynamic $g_ipt_options  | fgrep ACCEPT | $output_filter
+	    fi
+	    ;;
 	*)
 	    case "$g_program" in
 		*-lite)
@@ -1443,10 +1506,22 @@ do_dump_command() {
 	$g_tool -t rawpost -L $g_ipt_options
     fi
 
-    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
-    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+    local count
+    local max
 
-    heading "Conntrack Table ($count out of $max)"
+    if [ -f /proc/sys/net/netfilter/nf_conntrack_count ]; then
+	count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+	max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+
+	heading "Conntrack Table ($count out of $max)"
+    elif [ -f /proc/sys/net/ipv4/netfilter/ip_conntrack_count ]; then
+	count=$(cat /proc/sys/net/ipv4/netfilter/ip_conntrack_count)
+	max=$(cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max)
+
+	heading "Conntrack Table ($count out of $max)"
+    else
+	heading "Conntrack Table"
+    fi
 
     if [ $g_family -eq 4 ]; then
     	[ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack
@@ -1572,6 +1647,15 @@ restore_command() {
 			    g_noroutes=Yes
 			    option=${option#n}
 			    ;;
+			p*)
+			    [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system"
+			    g_purge=Yes
+			    option=${option%p}
+			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -1896,7 +1980,7 @@ add_command() {
 		ipset=6_${zone}_${interface};
 	    fi
 
-	    ipset=$(echo $ipset | sed 's/./_/g');
+	    ipset=$(echo $ipset | sed 's/\./_/g');
 
 	    if ! qt $IPSET -L $ipset; then
 		fatal_error "Zone $zone, interface $interface does not have a dynamic host list"
@@ -2013,6 +2097,166 @@ delete_command() {
     fi
 }
 
+open_close_command() {
+    local command
+    local desc
+    local proto
+    local icmptype
+
+    open_close_setup() {
+	[ -n "$g_nolock" ] || mutex_on
+
+	if ! product_is_started ; then
+	    [ -n "$g_nolock" ] || mutex_off
+	    fatal_error "The $COMMAND command requires the firewall to be running"
+	fi
+
+	if ! chain_exists dynamic; then
+	    [ -n "$g_nolock" ] || mutex_off
+	    fatal_error "The $COMMAND command requires DYNAMIC_BLACKLIST=Yes in the running configuration"
+	fi
+    }
+
+    [ $# -le 4 ] || fatal_error "Too many parameters"
+
+    if [ $COMMAND = open ]; then
+	[ $# -ge 2 ] || fatal_error "Too few parameters"
+    else
+	[ $# -ge 1 ] || fatal_error "Too few parameters"
+    fi
+
+    if [ $# -eq 1 ]; then
+	#
+	# close <rule number>
+	#
+	case $1 in
+	    [1-9]|[1-9][0-9]|[1-9][0-9][0-9]*)
+		;;
+	    *)
+		fatal_error "$1 is not a valid temporary open number"
+		;;
+	esac
+
+	open_close_setup #Conditionally acquires mutex
+
+	if $g_tool -L dynamic --line-numbers | grep -q "^$1 .* ACCEPT "; then
+	    if $g_tool -D dynamic $1; then
+		[ -n "$g_nolock" ] || mutex_off
+		echo "Temporary open #$1 closed"
+		return 0
+	    fi
+	    [ -n "$g_nolock" ] || mutex_off
+	    return 2
+	else
+	    [ -n "$g_nolock" ] || mutex_off
+	    fatal_error "$1 is not a valid temporary open number"
+	fi
+    else
+	if [ $1 = all ]; then
+	    command=dynamic
+	else
+	    command="dynamic -s $1"
+	fi
+
+	if [ $2 != all ]; then
+	    command="$command -d $2"
+	fi
+
+	desc="from $1 to $2"
+
+	if [ $# -ge 3 ]; then
+	    proto=$3
+
+	    [ $proto = icmp -a $g_family -eq 6 ] && proto=58
+
+	    command="$command -p $proto"
+
+	    case $3 in
+		[0-9]*)
+		    desc="$desc protocol $3"
+		    ;;
+		*)
+		    desc="$desc $3"
+		    ;;
+	    esac
+
+	    if [ $g_family -eq 4 ]; then
+		if [ $proto = 6 -o $proto = icmp ]; then
+		    proto=icmp
+		    icmptype='--icmp-type'
+		fi
+	    else
+		if [ $proto = 58 -o $proto = ipv6-icmp ]; then
+		    proto=icmp
+		    icmptype='--icmpv6-type'
+		fi
+	    fi
+	fi
+
+	if [ $# -eq 4 ]; then
+	    if [ $proto = icmp ]; then
+		case $4 in
+		    *,*)
+			fatal_error "Only a single ICMP type may be specified"
+			;;
+		    [0-9]*)
+			desc="$desc type $4"
+			;;
+		    *)
+			desc="$desc $4"
+			;;
+		esac
+
+		command="$command $icmptype $4"
+	    else
+		case $4 in
+		*,*)
+		    command="$command -m multiport --dports $4"
+		    ;;
+		*)
+		    command="$command --dport $4"
+		    ;;
+		esac
+
+		case $4 in
+		    [0-9]*,)
+			desc="$desc ports $4"
+			;;
+		    [0-9]*)
+			desc="$desc port $4"
+			;;
+		    *)
+			desc="$desc $4"
+			;;
+		esac
+	    fi
+	fi
+
+	command="$command -j ACCEPT"
+
+	open_close_setup #Conditionally acquires mutex
+
+	if [ $COMMAND = open ]; then
+	    if $g_tool -I $command ; then
+		[ -n "$g_nolock" ] || mutex_off
+		echo "Firewall dynamically opened for connections $desc"
+		return 0
+	    fi
+	    [ -n "$g_nolock" ] || mutex_off
+	    return 2
+	fi
+
+	if $g_tool -D $command 2> /dev/null; then
+	    [ -n "$g_nolock" ] || mutex_off
+	    echo "Firewall dynamically closed for connections $desc (may still be permitted by rules/policies)"
+	    return 0
+	fi
+
+	[ -n "$g_nolock" ] || mutex_off
+	fatal_error "Connections $desc are not currently opened"
+    fi
+}
+
 #
 # 'hits' commmand executor
 #
@@ -2329,6 +2573,8 @@ determine_capabilities() {
     MASQUERADE_TGT=
     UDPLITEREDIRECT=
     NEW_TOS_MATCH=
+    TARPIT_TARGET=
+    IFACE_MATCH=
 
     AMANDA_HELPER=
     FTP_HELPER=
@@ -2482,6 +2728,10 @@ determine_capabilities() {
 	qt $NFACCT del $chain
     fi
 
+    qt $g_tool -A $chain -p tcp -j TARPIT && TARPIT_TARGET=Yes
+
+    qt $g_tool -A $chain -m iface --iface lo --loopback && IFACE_MATCH=Yes
+
     if [ -n "$MANGLE_ENABLED" ]; then
 	qt $g_tool -t mangle -N $chain
 
@@ -2759,6 +3009,8 @@ report_capabilities_unsorted() {
     report_capability "MASQUERADE Target" $MASQUERADE_TGT
     report_capability "UDPLITE Port Redirection" $UDPLITEREDIRECT
     report_capability "New tos Match" $NEW_TOS_MATCH
+    report_capability "TARPIT Target" $TARPIT_TARGET
+    report_capability "Iface Match" $IFACE_MATCH
 
     report_capability "Amanda Helper" $AMANDA_HELPER
     report_capability "FTP Helper" $FTP_HELPER
@@ -2886,6 +3138,8 @@ report_capabilities_unsorted1() {
     report_capability1 MASQUERADE_TGT
     report_capability1 UDPLITEREDIRECT
     report_capability1 NEW_TOS_MATCH
+    report_capability1 TARPIT_TARGET
+    report_capability1 IFACE_MATCH
 
     report_capability1 AMANDA_HELPER
     report_capability1 FTP_HELPER
@@ -2944,9 +3198,74 @@ show_status() {
 
 }
 
+interface_status() {
+    case $(cat $1) in
+	0)
+	    echo Enabled
+	    ;;
+	1)
+	    echo Disabled
+	    ;;
+	*)
+	    echo Unknown
+	    ;;
+    esac
+}
+
+show_interfaces() {
+    local f
+    local interface
+    local printed
+
+    for f in ${VARDIR}/*.status; do
+	interface=$(basename $f)
+	echo "   Interface ${interface%.status} is $(interface_status $f)"
+	printed=Yes
+    done
+
+    [ -n "$printed" ] && echo
+}
+
 status_command() {
+     local finished
+    finished=0
+    local option
+    local interfaces
+
+    while [ $finished -eq 0 -a $# -gt 0 ]; do
+	option=$1
+	case $option in
+	    -*)
+		option=${option#-}
+
+		while [ -n "$option" ]; do
+		    case $option in
+			-)
+			    finished=1
+			    option=
+			    ;;
+			i*)
+			    interfaces=Yes
+			    option=${option#i}
+			    ;;
+			*)
+			    usage 1
+			    ;;
+		    esac
+		done
+		shift
+		;;
+	    *)
+		finished=1
+		;;
+	esac
+    done
+
+    [ $# -eq 0 ] || usage 1
+
     [ $VERBOSITY -ge 1 ] && echo "${g_product}-$SHOREWALL_VERSION Status at $g_hostname - $(date)" && echo
     show_status
+    [ -n "$interfaces" ] && show_interfaces
     exit $status
 }
 
@@ -2991,11 +3310,45 @@ reject_command() {
 }
 
 save_command() {
+    local finished
+    finished=0
+
+    shift
+
+    while [ $finished -eq 0 -a $# -gt 0 ]; do
+	option=$1
+	case $option in
+	    -*)
+		option=${option#-}
+
+		while [ -n "$option" ]; do
+		    case $option in
+			-)
+			    finished=1
+			    option=
+			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
+			*)
+			    usage 1
+			    ;;
+		    esac
+		done
+		shift
+		;;
+	    *)
+		finished=1
+		;;
+	esac
+    done
+
     case $# in
-	1)
+	0)
 	    ;;
-	2)
-	    RESTOREFILE="$2"
+	1)
+	    RESTOREFILE="$1"
 	    validate_restorefile '<restore file>'
 	    ;;
 	*)
@@ -3228,11 +3581,6 @@ get_config() {
 
     g_hostname=$(hostname 2> /dev/null)
 
-    IP=$(mywhich ip 2> /dev/null)
-    if [ -z "$IP" ] ; then
-	fatal_error "Can't find ip executable"
-    fi
-
     if [ -n "$IPSET" ]; then
 	case "$IPSET" in
 	    */*)
@@ -3254,6 +3602,10 @@ get_config() {
 
     TC=tc
 
+    IP=$(mywhich ip 2> /dev/null)
+
+    g_loopback=$(find_loopback_interfaces)
+
 }
 
 #
@@ -3290,7 +3642,11 @@ start_command() {
 	[ -n "$g_nolock" ] || mutex_on
 
 	if [ -x ${VARDIR}/firewall ]; then
-	    run_it ${VARDIR}/firewall $g_debugging start
+	    if [ -n "$g_fast" -a -x ${VARDIR}/${RESTOREFILE} -a ! ${VARDIR}/firewall -nt ${VARDIR}/${RESTOREFILE} ]; then
+		run_it ${VARDIR}/${RESTOREFILE} $g_debugging restore
+	    else
+		run_it ${VARDIR}/firewall $g_debugging start
+	    fi
 	    rc=$?
 	else
 	    error_message "${VARDIR}/firewall is missing or is not executable"
@@ -3326,6 +3682,14 @@ start_command() {
 			    finished=1
 			    option=
 			    ;;
+			f*)
+			    g_fast=Yes
+			    option=${option#f}
+			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
 			p*)
 			    [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system"
 			    g_purge=Yes
@@ -3387,6 +3751,10 @@ restart_command() {
 			    g_purge=Yes
 			    option=${option%p}
 			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -3423,6 +3791,14 @@ restart_command() {
     return $rc
 }
 
+run_command() {
+    if [ -x ${VARDIR}/firewall ] ; then
+	run_it ${VARDIR}/firewall $g_debugging $@
+    else
+	fatal_error "${VARDIR}/firewall does not exist or is not executable"
+    fi
+}
+
 #
 # Give Usage Information
 #
@@ -3433,6 +3809,7 @@ usage() # $1 = exit status
     echo "   add <interface>[:<host-list>] ... <zone>"
     echo "   allow <address> ..."
     echo "   clear"
+    echo "   close <source> <dest> [ <protocol> [ <port> ] ]" 
     echo "   delete <interface>[:<host-list>] ... <zone>"
     echo "   disable <interface>"
     echo "   drop <address> ..."
@@ -3450,14 +3827,18 @@ usage() # $1 = exit status
     echo "   logdrop <address> ..."
     echo "   logreject <address> ..."
     echo "   logwatch [<refresh interval>]"
+    echo "   open <source> <dest> [ <protocol> [ <port> ] ]" 
     echo "   reject <address> ..."
     echo "   reset [ <chain> ... ]"
-    echo "   restart [ -n ] [ -p ] [ -f ] [ <directory> ]"
-    echo "   restore [ -n ] [ <file name> ]"
-    echo "   save [ <file name> ]"
+    echo "   restart [ -n ] [ -p ] [ -f ] [ -C ] [ <directory> ]"
+    echo "   restore [ -n ] [ -p ] [ -C ] [ <file name> ]"
+    echo "   run <command> [ <parameter> ... ]"
+    echo "   save [ -C ] [ <file name> ]"
+    echo "   savesets"
     echo "   [ show | list | ls ] [ -b ] [ -x ] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]"
     echo "   [ show | list | ls ] [ -f ] capabilities"
     echo "   [ show | list | ls ] arptables"
+    echo "   [ show | list | ls ] [ -x ] {bl|blacklists}"
     echo "   [ show | list | ls ] classifiers"
     echo "   [ show | list | ls ] config"
     echo "   [ show | list | ls ] connections"
@@ -3473,14 +3854,15 @@ usage() # $1 = exit status
     echo "   [ show | list | ls ] [ -m ] log [<regex>]"
     echo "   [ show | list | ls ] [ -x ] mangle|nat|raw|rawpost"
     echo "   [ show | list | ls ] nfacct"
+    echo "   [ show | list | ls ] opens"
     echo "   [ show | list | ls ] policies"
     echo "   [ show | list | ls ] routing"
     echo "   [ show | list | ls ] tc [ device ]"
     echo "   [ show | list | ls ] vardir"
     echo "   [ show | list | ls ] zones"
-    echo "   start [ -f ] [ -p ] [ <directory> ]"
+    echo "   start [ -f ] [ -p ] [ -C ] [ <directory> ]"
     echo "   stop"
-    echo "   status"
+    echo "   status [ -i ]"
     echo "   version [ -a ]"
     echo
     exit $1
@@ -3530,6 +3912,8 @@ shorewall_cli() {
     g_directives=
     g_inline=
     g_tcrules=
+    g_counters=
+    g_loopback=
 
     VERBOSE=
     VERBOSITY=1
@@ -3725,16 +4109,21 @@ shorewall_cli() {
 		fatal_error "$g_product is not running"
 	    fi
 	    ;;
+	run)
+	    [ $# -gt 1 ] || fatal_error "Missing function name"
+	    get_config Yes
+	    run_command $@
+	    ;;
 	show|list|ls)
 	    get_config Yes No Yes
     	    shift
     	    show_command $@
 	    ;;
 	status)
-	    [ $# -eq 1 ] || usage 1
 	    [ "$(id -u)" != 0 ] && fatal_error "The status command may only be run by root"
 	    get_config
-	    status_command
+	    shift
+	    status_command $@
 	    ;;
 	dump)
 	    get_config Yes No Yes
@@ -3775,6 +4164,11 @@ shorewall_cli() {
 	    [ $# -eq 1 ] && usage 1
 	    reject_command $@
 	    ;;
+	open|close)
+	    get_config
+	    shift
+	    open_close_command $@
+	    ;;
 	allow)
 	    get_config
 	    allow_command $@
@@ -3838,6 +4232,12 @@ shorewall_cli() {
 	    shift
 	    noiptrace_command $@
 	    ;;
+	savesets)
+	    [ $# -eq 1 ] || usage 1
+	    get_config
+	    [ -n "$g_debugging" ] && set -x
+	    savesets1
+	    ;;
 	*)
 	    if [ -z "$g_lite" ]; then
 		compiler_command $@

Shorewall-core/lib.common

@@ -157,6 +157,7 @@ run_it() {
 	[ -n "$g_timestamp" ]  && options=${options}t
 	[ -n "$g_purge" ]      && options=${options}p
 	[ -n "$g_recovering" ] && options=${options}r
+	[ -n "$g_counters" ]   && options=${options}c
 
 	options="${options}V $VERBOSITY"
 
@@ -172,6 +173,7 @@ run_it() {
 error_message() # $* = Error Message
 {
    echo "   $@" >&2
+   return 1
 }
 
 #
@@ -372,7 +374,7 @@ reload_kernel_modules() {
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=ko ko.gz o o.gz gz}" ]
+    [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
 
     [ -z "$MODULESDIR" ] && \
 	uname=$(uname -r) && \
@@ -411,7 +413,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=o gz ko o.gz ko.gz}" ]
+    [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
 
     [ -z "$MODULESDIR" ] && \
 	uname=$(uname -r) && \
@@ -643,6 +645,24 @@ find_first_interface_address_if_any() # $1 = interface
     fi
 }
 
+#
+#Determines if the passed interface is a loopback interface
+#
+loopback_interface() { #$1 = Interface name
+    [ "$1" = lo ] || $IP link show $1 | fgrep -q LOOPBACK
+}
+
+#
+# Find Loopback Interfaces
+#
+find_loopback_interfaces() {
+    local interfaces
+
+    [ -x "$IP" ] && interfaces=$($IP link show | fgrep LOOPBACK | sed 's/://g' | cut -d ' ' -f 2)
+
+    [ -n "$interfaces" ] && echo $interfaces || echo lo
+}
+
 #
 # Internal version of 'which'
 #

Shorewall-core/shorewallrc.apple

@@ -14,7 +14,7 @@ INITDIR=                               #Unused on OS X
 INITFILE=                              #Unused on OS X
 INITSOURCE=                            #Unused on OS X
 ANNOTATED=                             #Unused on OS X
-SYSTEMD=                               #Unused on OS X
+SERVICEDIR=                            #Unused on OS X
 SERVICEFILE=                           #Unused on OS X
 SYSCONFDIR=                            #Unused on OS X
 SPARSE=Yes                             #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.

Shorewall-core/shorewallrc.archlinux

@@ -8,14 +8,14 @@ SHAREDIR=${PREFIX}/share               #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/share             #Directory for executable scripts.
 PERLLIBDIR=${PREFIX}/share/shorewall   #Directory to install Shorewall Perl module directory
 CONFDIR=/etc                           #Directory where subsystem configurations are installed
-SBINDIR=/usr/sbin                      #Directory where system administration programs are installed
+SBINDIR=/usr/bin                       #Directory where system administration programs are installed
 MANDIR=${SHAREDIR}/man                 #Directory where manpages are installed.
 INITDIR=                               #Directory where SysV init scripts are installed.
 INITFILE=                              #Name of the product's installed SysV init script
 INITSOURCE=                            #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                             #If non-zero, annotated configuration files are installed
 SYSCONFDIR=                            #Directory where SysV init parameter files are installed
-SYSTEMD=/usr/lib/systemd/system        #Directory where .service files are installed (systems running systemd only)
+SERVICEDIR=/usr/lib/systemd/system     #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                           #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SPARSE=                                #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                        #Directory where product variable data is stored.

Shorewall-core/shorewallrc.cygwin

@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                   #Unused on Cygwin
 INITFILE=                             #Unused on Cygwin
 INITSOURCE=                           #Unused on Cygwin
 ANNOTATED=                            #Unused on Cygwin
-SYSTEMD=                              #Unused on Cygwin
+SERVICEDIR=                           #Unused on Cygwin
 SERVICEFILE=                          #Unused on Cygwin
 SYSCONFDIR=                           #Unused on Cygwin
 SPARSE=Yes                            #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.

Shorewall-core/shorewallrc.debian

@@ -17,7 +17,7 @@ ANNOTATED=                              #If non-zero, annotated configuration fi
 SYSCONFFILE=default.debian              #Name of the distributed file to be installed in $SYSCONFDIR
 SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default                 #Directory where SysV init parameter files are installed
-SYSTEMD=                                #Directory where .service files are installed (systems running systemd only)
+SERVICEDIR=                             #Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes                              #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.

Shorewall-core/shorewallrc.default

@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                     #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.sh                      #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SYSTEMD=                                #Directory where .service files are installed (systems running systemd only)
+SERVICEDIR=                             #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                            #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=                            #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=                             #Directory where SysV init parameter files are installed

Shorewall-core/shorewallrc.redhat

@@ -14,7 +14,7 @@ INITDIR=/etc/rc.d/init.d                #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.fedora.sh               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SYSTEMD=/lib/systemd/system             #Directory where .service files are installed (systems running systemd only)
+SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
 SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed as $SYSCONFDIR/$PRODUCT
 SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter files are installed

Shorewall-core/shorewallrc.slackware

@@ -15,7 +15,7 @@ AUXINITSOURCE=init.slackware.firewall.sh   #Name of the distributed file to be i
 AUXINITFILE=rc.firewall                    #Name of the product's installed SysV init script
 INITSOURCE=init.slackware.$PRODUCT.sh      #Name of the distributed file to be installed as a second SysV init script
 INITFILE=rc.$PRODUCT                       #Name of the product's installed second init script
-SYSTEMD=                                   #Name of the directory where .service files are installed (systems running systemd only)
+SERVICEDIR=                                #Name of the directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                               #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=                               #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=                                #Name of the directory where SysV init parameter files are installed.

Shorewall-core/shorewallrc.suse

@@ -8,13 +8,13 @@ CONFDIR=/etc                                          #Directory where subsystem
 SHAREDIR=${PREFIX}/share                              #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/lib                              #Directory for executable scripts.
 PERLLIBDIR=${PREFIX}/lib/perl5/vendor_perl/5.14.2     #Directory to install Shorewall Perl module directory
-SBINDIR=/sbin                                         #Directory where system administration programs are installed
+SBINDIR=/usr/sbin                                     #Directory where system administration programs are installed
 MANDIR=${SHAREDIR}/man/                               #Directory where manpages are installed.
 INITDIR=/etc/init.d                                   #Directory where SysV init scripts are installed.
 INITFILE=$PRODUCT                                     #Name of the product's SysV init script
 INITSOURCE=init.suse.sh                               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                                            #If non-zero, annotated configuration files are installed
-SYSTEMD=                                              #Directory where .service files are installed (systems running systemd only)
+SERVICEDIR=                                           #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                      		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=sysconfig                                 #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=/etc/sysconfig/                            #Directory where SysV init parameter files are installed

Shorewall-core/uninstall.sh

@@ -35,6 +35,12 @@ usage() # $1 = exit status
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
 qt()
 {
     "$@" >/dev/null 2>&1

Shorewall-init/ifupdown.debian.sh

@@ -28,7 +28,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
 	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then

Shorewall-init/ifupdown.fedora.sh

@@ -31,7 +31,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x "$STATEDIR/firewall" ]; then
 	if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then

Shorewall-init/ifupdown.suse.sh

@@ -28,7 +28,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
 	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then

Shorewall-init/init.debian.sh

@@ -71,7 +71,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || echo_notdone
@@ -105,24 +105,35 @@ shorewall_start () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
+      if [ -x ${STATEDIR}/firewall ]; then
           #
 	  # Run in a sub-shell to avoid name collisions
 	  #
 	  ( 
-	      if ! ${STATEDIR}/$PRODUCT/firewall status > /dev/null 2>&1; then
-		  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} stop || echo_notdone
+	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop || echo_notdone
 	      else
 		  echo_notdone
 	      fi
 	  )
       else
-	  echo echo_notdone
+	  echo_notdone
       fi
   done
 
   echo "done."
 
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+
+      echo -n "Restoring ipsets: "
+
+      if ! ipset -R < "$SAVE_IPSETS"; then
+	  echo_notdone
+      fi
+
+      echo "done."
+  fi
+
   return 0
 }
 
@@ -135,13 +146,27 @@ shorewall_stop () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
-	  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} clear || echo_notdone
+      if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear || echo_notdone
       fi
   done
 
   echo "done."
 
+  if [ -n "$SAVE_IPSETS" ]; then
+
+      echo "Saving ipsets: "
+
+      mkdir -p $(dirname "$SAVE_IPSETS")
+      if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+      else
+	  echo_notdone
+      fi
+
+      echo "done."
+  fi
+
   return 0
 }
 

Shorewall-init/init.fedora.sh

@@ -42,7 +42,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
 	${SBINDIR}/$PRODUCT $OPTIONS compile -c

Shorewall-init/init.sh

@@ -67,7 +67,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
 	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then

Shorewall-init/init.suse.sh

@@ -77,7 +77,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || exit

Shorewall-init/install.sh

@@ -35,6 +35,7 @@ usage() # $1 = exit status
     echo "usage: $ME [ <configuration-file> ]"
     echo "       $ME -v"
     echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
@@ -105,9 +106,12 @@ PRODUCT=shorewall-init
 T='-T'
 
 finished=0
+configure=1
 
 while [ $finished -eq 0 ] ; do
-    case "$1" in
+    option="$1"
+
+    case "$option" in
 	-*)
 	    option=${option#-}
 
@@ -120,6 +124,10 @@ while [ $finished -eq 0 ] ; do
 			echo "Shorewall-init Firewall Installer Version $VERSION"
 			exit 0
 			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
 		    *)
 			usage 1
 			;;
@@ -176,8 +184,12 @@ for var in SHAREDIR LIBEXECDIR CONFDIR SBINDIR VARLIB VARDIR; do
     require $var
 done
 
+[ -n "$SANDBOX" ] && configure=0
+
 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 
+[ $configure -eq 1 ] && ETC=/etc || ETC="${CONFDIR}"
+
 if [ -z "$BUILD" ]; then
     case $(uname) in
 	cygwin*)
@@ -191,7 +203,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID=)
 
 		case $ID in
-		    fedora)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian|ubuntu)
@@ -306,6 +318,7 @@ fi
 # Install the Firewall Script
 #
 if [ -n "$INITFILE" ]; then
+    mkdir -p ${DESTDIR}${INITDIR}
     install_file $INITSOURCE ${DESTDIR}${INITDIR}/$INITFILE 0544
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${INITDIR}/$INITFILE
     
@@ -319,13 +332,17 @@ fi
 #
 # Install the .service file
 #
-if [ -n "$SYSTEMD" ]; then
-    mkdir -p ${DESTDIR}${SYSTEMD}
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+if [ -n "$SERVICEDIR" ]; then
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 600 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
-    if [ -n "$DESTDIR" ]; then
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
+    if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${SBINDIR}
         chmod 755 ${DESTDIR}${SBINDIR}
     fi
@@ -364,16 +381,22 @@ fi
 
 if [ $HOST = debian ]; then
     if [ -n "${DESTDIR}" ]; then
-	mkdir -p ${DESTDIR}/etc/network/if-up.d/
-	mkdir -p ${DESTDIR}/etc/network/if-down.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-up.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-down.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-post-down.d/
+    elif [ $configure -eq 0 ]; then
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-post-down.d/
     fi
 
-    if [ ! -f ${DESTDIR}/etc/default/shorewall-init ]; then
+    if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
-	    mkdir ${DESTDIR}/etc/default
+	    mkdir ${DESTDIR}${ETC}/default
 	fi
 
-	install_file sysconfig ${DESTDIR}/etc/default/shorewall-init 0644
+	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
+	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
     fi
 
     IFUPDOWN=ifupdown.debian.sh
@@ -383,13 +406,13 @@ else
 
 	if [ -z "$RPM" ]; then
 	    if [ $HOST = suse ]; then
-		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-up.d
-		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d
+		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-up.d
+		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-down.d
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
 	    else
-		mkdir -p ${DESTDIR}/etc/NetworkManager/dispatcher.d
+		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
 	    fi
 	fi
     fi
@@ -415,17 +438,29 @@ mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
-    install_file ifupdown ${DESTDIR}/etc/NetworkManager/dispatcher.d/01-shorewall 0544
+    [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
+    install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
 fi
 
 case $HOST in
     debian)
-	install_file ifupdown ${DESTDIR}/etc/network/if-up.d/shorewall 0544
-	install_file ifupdown ${DESTDIR}/etc/network/if-down.d/shorewall 0544
-	install_file ifupdown ${DESTDIR}/etc/network/if-post-down.d/shorewall 0544
+	if [ $configure -eq 1 ]; then
+	    install_file ifupdown ${DESTDIR}/etc/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}/etc/network/if-down.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}/etc/network/if-post-down.d/shorewall 0544
+	else
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-down.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-post-down.d/shorewall 0544
+	fi
 	;;
     suse)
 	if [ -z "$RPM" ]; then
+	    if [ $configure -eq 0 ]; then
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-up.d/
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d/
+	    fi
+
 	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-up.d/shorewall 0544
 	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-down.d/shorewall 0544
 	fi
@@ -453,7 +488,7 @@ case $HOST in
 esac
 
 if [ -z "$DESTDIR" ]; then
-    if [ -n "$first_install" ]; then
+    if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian ]; then
 	    if mywhich insserv; then
 		if insserv ${INITDIR}/shorewall-init; then
@@ -476,7 +511,7 @@ if [ -z "$DESTDIR" ]; then
 	    # not by the installer
 	    /bin/true
 	else
-	    if [ -n "$SYSTEMD" ]; then
+	    if [ -n "$SERVICEDIR" ]; then
 		if systemctl enable shorewall-init.service; then
 		    echo "Shorewall Init will start automatically at boot"
 		fi
@@ -505,7 +540,7 @@ if [ -z "$DESTDIR" ]; then
 	fi
     fi
 else
-    if [ -n "$first_install" ]; then
+    if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian ]; then
 	    if [ -n "${DESTDIR}" ]; then
 		mkdir -p ${DESTDIR}/etc/rcS.d

Shorewall-init/shorewall-init

@@ -30,7 +30,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || exit 1
@@ -63,18 +63,19 @@ shorewall_start () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
+      if [ -x ${STATEDIR}/firewall ]; then
           #
 	  # Run in a sub-shell to avoid name collisions
 	  #
 	  (
-	      if ! ${STATEDIR}/$PRODUCT/firewall status > /dev/null 2>&1; then
-		  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} stop || exit 1
+	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop || exit 1
 	      else
 		  exit 1
 	      fi
 	  )
       else
+          echo ERROR:  ${STATEDIR}/firewall does not exist or is not executable!
 	  exit 1
       fi
   done
@@ -95,8 +96,8 @@ shorewall_stop () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
-	  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} clear || exit 1
+      if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear || exit 1
       fi
   done
 

Shorewall-init/shorewall-init.service

@@ -1,20 +1,20 @@
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.4
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
 #
-#     Copyright 2011 Jonathan Underwood (jonathan.underwood@gmail.com)
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
-Description=Shorewall IPv4 firewall
-After=syslog.target
+Description=Shorewall IPv4 firewall (bootup security)
 Before=network.target
+Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-init
 StandardOutput=syslog
-ExecStart=/sbin/shorewall-init $OPTIONS start
-ExecStop=/sbin/shorewall-init $OPTIONS stop
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=basic.target

Shorewall-init/shorewall-init.service.214

@@ -0,0 +1,21 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#
+[Unit]
+Description=Shorewall IPv4 firewall (bootup security)
+Before=network-pre.target
+Wants=network-pre.target
+Conflicts=iptables.service firewalld.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/sysconfig/shorewall-init
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
+
+[Install]
+WantedBy=basic.target

Shorewall-init/uninstall.sh

@@ -1,4 +1,4 @@
-\#!/bin/sh
+#!/bin/sh
 #
 # Script to back uninstall Shoreline Firewall
 #
@@ -35,6 +35,12 @@ usage() # $1 = exit status
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
 qt()
 {
     "$@" >/dev/null 2>&1
@@ -69,6 +75,42 @@ remove_file() # $1 = file to restore
     fi
 }
 
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
 #
 # Read the RC file
 #
@@ -114,22 +156,29 @@ fi
 
 echo "Uninstalling Shorewall Init $VERSION"
 
+[ -n "$SANDBOX" ] && configure=0
+
 INITSCRIPT=${CONFDIR}/init.d/shorewall-init
 
 if [ -f "$INITSCRIPT" ]; then
-    if mywhich updaterc.d ; then
-	updaterc.d shorewall-init remove
-    elif mywhich insserv ; then
-        insserv -r $INITSCRIPT
-    elif mywhich chkconfig ; then
-	chkconfig --del $(basename $INITSCRIPT)
-    elif mywhich systemctl ; then
-	systemctl disable shorewall-init
+    if [ $configure -eq 1 ]; then
+	if mywhich updaterc.d ; then
+	    updaterc.d shorewall-init remove
+	elif mywhich insserv ; then
+            insserv -r $INITSCRIPT
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $INITSCRIPT)
+	fi
     fi
 
     remove_file $INITSCRIPT
 fi
 
+if [ -n "$SYSTEMD" ]; then
+    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
+    rm -f $SYSTEMD/shorewall-init.service
+fi
+
 [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
 [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
 
@@ -159,8 +208,9 @@ if [ -d ${CONFDIR}/ppp ]; then
     done
 fi
 
+rm -f  ${SBINDIR}/shorewall-init
 rm -rf ${SHAREDIR}/shorewall-init
-rm -rf ${LIBEXEC}/shorewall-init
+rm -rf ${LIBEXECDIR}/shorewall-init
 
 echo "Shorewall Init Uninstalled"
 

Shorewall-lite/init.fedora.sh

@@ -39,7 +39,7 @@ fi
 
 start() {
     echo -n $"Starting Shorewall: "
-    $shorewall $OPTIONS start 2>&1 | $logger
+    $shorewall $OPTIONS start $STARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile
@@ -69,7 +69,7 @@ restart() {
 # Note that we don't simply stop and start since shorewall has a built in
 # restart which stops the firewall if running and then starts it.
     echo -n $"Restarting Shorewall: "
-    $shorewall $OPTIONS restart 2>&1 | $logger
+    $shorewall $OPTIONS restart $RESTARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile

Shorewall-lite/install.sh

@@ -30,6 +30,7 @@ usage() # $1 = exit status
     echo "usage: $ME [ <configuration-file> ]"
     echo "       $ME -v"
     echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
@@ -113,9 +114,13 @@ fi
 # Parse the run line
 #
 finished=0
+configure=1
 
 while [ $finished -eq 0 ] ; do
-    case "$1" in
+
+    option=$1
+
+    case "$option" in
 	-*)
 	    option=${option#-}
 
@@ -128,6 +133,10 @@ while [ $finished -eq 0 ] ; do
 			echo "$Product Firewall Installer Version $VERSION"
 			exit 0
 			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
 		    *)
 			usage 1
 			;;
@@ -186,6 +195,8 @@ done
 
 PATH=${SBINDIR}:/bin:/usr${SBINDIR}:/usr/bin:/usr/local/bin:/usr/local${SBINDIR}
 
+[ -n "$SANDBOX" ] && configure=0
+
 #
 # Determine where to install the firewall script
 #
@@ -195,7 +206,7 @@ T='-T'
 
 if [ -z "$BUILD" ]; then
     case $(uname) in
-	cygwin*)
+	cygwin*|CYGWIN*)
 	    BUILD=cygwin
 	    ;;
 	Darwin)
@@ -206,7 +217,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID)
 
 		case $ID in
-		    fedora)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian)
@@ -242,7 +253,7 @@ if [ -z "$BUILD" ]; then
 fi
 
 case $BUILD in
-    cygwin*)
+    cygwin*|CYGWIN*)
 	OWNER=$(id -un)
 	GROUP=$(id -gn)
 	;;
@@ -346,6 +357,7 @@ fi
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
 install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
+[ -n "${INITFILE}" ] && install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
 
 echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
 
@@ -358,7 +370,7 @@ mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${VARDIR}
 
 chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
-chmod 755 ${DESTDIR}/usr/share/$PRODUCT
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
 
 if [ -n "$DESTDIR" ]; then
     mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
@@ -369,7 +381,7 @@ fi
 
 if [ -n "$INITFILE" ]; then
     if [ -f "${INITSOURCE}" ]; then
-	initfile="${DESTDIR}/${INITDIR}/${INITFILE}"
+	initfile="${DESTDIR}${INITDIR}/${INITFILE}"
 	install_file ${INITSOURCE} "$initfile" 0544
 
 	[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' "$initfile"
@@ -380,12 +392,16 @@ fi
 #
 # Install the .service file
 #
-if [ -n "$SYSTEMD" ]; then
-    mkdir -p ${DESTDIR}${SYSTEMD}
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+if [ -n "$SERVICEDIR" ]; then
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 600 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
 #
 # Install the config file
@@ -466,18 +482,18 @@ done
 if [ -d manpages ]; then
     cd manpages
 
-    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${SHAREDIR}/man/man5/ ${DESTDIR}${SHAREDIR}/man/man8/
+    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
 
     for f in *.5; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${SHAREDIR}/man/man5/$f.gz
-	echo "Man page $f.gz installed to ${DESTDIR}${SHAREDIR}/man/man5/$f.gz"
+	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
     for f in *.8; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${SHAREDIR}/man/man8/$f.gz
-	echo "Man page $f.gz installed to ${DESTDIR}${SHAREDIR}/man/man8/$f.gz"
+	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
     cd ..
@@ -499,7 +515,7 @@ chmod 644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 # Remove and create the symbolic link to the init script
 #
 
-if [ -z "$DESTDIR" ]; then
+if [ -z "${DESTDIR}" -a -n "${INITFILE}" ]; then
     rm -f ${SHAREDIR}/$PRODUCT/init
     ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
 fi
@@ -526,8 +542,8 @@ if [ ${SHAREDIR} != /usr/share ]; then
     eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SBINDIR}/$PRODUCT
 fi
 
-if [ -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
-    if [ -n "$SYSTEMD" ]; then
+if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
+    if [ -n "$SERVICEDIR" ]; then
 	if systemctl enable ${PRODUCT}.service; then
 	    echo "$Product will start automatically at boot"
 	fi

Shorewall-lite/manpages/shorewall-lite.xml

@@ -59,6 +59,21 @@
       choice="plain"><option>clear</option><arg><option>-f</option></arg></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>close</option><arg choice="req">
+      <replaceable>open-number</replaceable> |
+      <replaceable>source</replaceable><replaceable>dest</replaceable><arg><replaceable>protocol</replaceable><arg>
+      <replaceable>port</replaceable> </arg></arg></arg><replaceable>
+      </replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -116,6 +131,8 @@
       <arg><option>-l</option></arg>
 
       <arg><option>-m</option></arg>
+
+      <arg><option>-c</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -263,6 +280,15 @@
       expression</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg choice="plain"><option>open</option><replaceable>
+      source</replaceable><replaceable> dest</replaceable><arg>
+      <replaceable>protocol</replaceable><arg> <replaceable>port</replaceable>
+      </arg> </arg></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -299,7 +325,7 @@
 
       <arg><option>-n</option></arg>
 
-      <arg><option>-p</option></arg>
+      <arg><option>-p</option><arg><option>-C</option></arg></arg>
 
       <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
@@ -314,6 +340,8 @@
 
       <arg choice="plain"><option>restore</option></arg>
 
+      <arg><option>-C</option></arg>
+
       <arg><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
@@ -325,11 +353,38 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>save</option></arg>
+      <arg choice="plain"><option>run</option></arg>
+
+      <arg choice="plain">function</arg>
+
+      <arg><replaceable>parameter ...</replaceable></arg>
+    </cmdsynopsis>
+
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg
+      choice="plain"><option>save</option><arg><option>-C</option></arg></arg>
 
       <arg choice="opt"><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>savesets</option></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -337,7 +392,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="opt"><option>show | list | ls </option></arg>
+      <arg choice="req"><option>show | list | ls </option></arg>
 
       <arg><option>-b</option></arg>
 
@@ -359,7 +414,21 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="opt"><option>show | list | ls </option></arg>
+      <arg choice="req"><option>show | list | ls </option></arg>
+
+      <arg><option>-x</option></arg>
+
+      <arg choice="plain"><option>{bl|blacklists}</option></arg>
+    </cmdsynopsis>
+
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="req"><option>show | list | ls </option></arg>
 
       <arg><option>-f</option></arg>
 
@@ -373,7 +442,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="opt"><option>show | list | ls </option></arg>
+      <arg choice="req"><option>show | list | ls </option></arg>
 
       <arg
       choice="req"><option>classifiers|connections|config|events|filters|ip|ipa|zones|policies|marks</option></arg>
@@ -386,7 +455,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="opt"><option>show | list | ls </option></arg>
+      <arg choice="req"><option>show | list | ls </option></arg>
 
       <arg choice="plain"><option>event</option><arg
       choice="plain"><replaceable>event</replaceable></arg></arg>
@@ -399,11 +468,11 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="opt"><option>show | list | ls </option></arg>
+      <arg choice="req"><option>show | list | ls </option></arg>
 
-      <arg><option>-x</option></arg>
+      <arg><option>-c</option></arg>
 
-      <arg choice="req"><option>mangle|nat|routing|raw|rawpost</option></arg>
+      <arg choice="plain"><option>routing</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -413,7 +482,21 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="opt"><option>show | list | ls </option></arg>
+      <arg choice="req"><option>show | list | ls </option></arg>
+
+      <arg><option>-x</option></arg>
+
+      <arg choice="req"><option>mangle|nat|raw|rawpost</option></arg>
+    </cmdsynopsis>
+
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="req"><option>show | list | ls </option></arg>
 
       <arg choice="plain"><option>tc</option></arg>
     </cmdsynopsis>
@@ -425,7 +508,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="opt"><option>show | list | ls </option></arg>
+      <arg choice="req"><option>show | list | ls </option></arg>
 
       <arg><option>-m</option></arg>
 
@@ -445,6 +528,10 @@
       <arg><option>-n</option></arg>
 
       <arg><option>-p</option></arg>
+
+      <arg><option>-f</option></arg>
+
+      <arg><option>-C</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -465,7 +552,8 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>status</option></arg>
+      <arg choice="plain"><arg
+      choice="plain"><option>status</option><arg><option>-i</option></arg></arg></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -496,8 +584,9 @@
 
     <para>The nolock <option>option</option> prevents the command from
     attempting to acquire the Shorewall-lite lockfile. It is useful if you
-    need to include <command>shorewall</command> commands in
-    <filename>/etc/shorewall/started</filename>.</para>
+    need to include <command>shorewall</command> commands in the
+    <filename>started</filename> <ulink
+    url="../shorewall_extension_scripts.html">extension script</ulink>.</para>
 
     <para>The <emphasis>options</emphasis> control the amount of output that
     the command produces. They consist of a sequence of the letters <emphasis
@@ -508,8 +597,8 @@
     role="bold">v</emphasis> adds one to the effective verbosity and each
     <emphasis role="bold">q</emphasis> subtracts one from the effective
     VERBOSITY. Alternately, <emphasis role="bold">v</emphasis> may be followed
-    immediately with one of -1,0,1,2 to specify a specify VERBOSITY. There may
-    be no white-space between <emphasis role="bold">v</emphasis> and the
+    immediately with one of -1,0,1,2 to specify VERBOSITY. There may be no
+    white-space between <emphasis role="bold">v</emphasis> and the
     VERBOSITY.</para>
 
     <para>The <emphasis>options</emphasis> may also include the letter
@@ -577,6 +666,27 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">close</emphasis> {
+        <replaceable>open-number</replaceable> |
+        <replaceable>source</replaceable> <replaceable>dest</replaceable> [
+        <replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
+        ] ] }</term>
+
+        <listitem>
+          <para>Added in Shorewall 4.5.8. This command closes a temporary open
+          created by the <command>open</command> command. In the first form,
+          an <replaceable>open-number</replaceable> specifies the open to be
+          closed. Open numbers are displayed in the <emphasis
+          role="bold">num</emphasis> column of the output of the
+          <command>shorewall-lite show opens </command>command.</para>
+
+          <para>When the second form of the command is used, the parameters
+          must match those given in the earlier <command>open</command>
+          command.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">delete</emphasis></term>
 
@@ -628,6 +738,9 @@
 
           <para>The <emphasis role="bold">-l</emphasis> option causes the rule
           number for each Netfilter rule to be displayed.</para>
+
+          <para>The <option>-c</option> option causes the route cache to be
+          dumped in addition to the other routing information.</para>
         </listitem>
       </varlistentry>
 
@@ -766,6 +879,45 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">open</emphasis>
+        <replaceable>source</replaceable> <replaceable>dest</replaceable> [
+        <replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
+        ] ]</term>
+
+        <listitem>
+          <para>Added in Shorewall 4.6.8. This command requires that the
+          firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in
+          <ulink url="/manpages/shorewall.conf.html">shorewall.conf
+          (5)</ulink>. The effect of the command is to temporarily open the
+          firewall for connections matching the parameters.</para>
+
+          <para>The <replaceable>source</replaceable> and
+          <replaceable>dest</replaceable> parameters may each be specified as
+          <emphasis role="bold">all</emphasis> if you don't wish to restrict
+          the connection source or destination respectively. Otherwise, each
+          must contain a host or network address or a valid DNS name.</para>
+
+          <para>The <replaceable>protocol</replaceable> may be specified
+          either as a number or as a name listed in /etc/protocols. The
+          <replaceable>port</replaceable> may be specified numerically or as a
+          name listed in /etc/services.</para>
+
+          <para>To reverse the effect of a successful <command>open</command>
+          command, use the <command>close</command> command with the same
+          parameters or simply restart the firewall.</para>
+
+          <para>Example: To open the firewall for SSH connections to address
+          192.168.1.1, the command would be:</para>
+
+          <programlisting>    shorewall-lite open all 192.168.1.1 tcp 22</programlisting>
+
+          <para>To reverse that command, use:</para>
+
+          <screen>    shorewall-lite close all 192.168.1.1 tcp 22</screen>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">reset</emphasis></term>
 
@@ -789,6 +941,12 @@
           <para>The <option>-p</option> option causes the connection tracking
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
+          If the specified (or implicit) firewall script is the one that
+          generated the current running configuration, then the running
+          netfilter configuration will be reloaded as is so as to preserve the
+          iptables packet and byte counters.</para>
         </listitem>
       </varlistentry>
 
@@ -804,6 +962,36 @@
           <emphasis>filename</emphasis> is given then Shorewall-lite will be
           restored from the file specified by the RESTOREFILE option in <ulink
           url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>
+
+          <caution>
+            <para>If your iptables ruleset depends on variables that are
+            detected at run-time, either in your params file or by
+            Shorewall-generated code, <command>restore</command> will use the
+            values that were current when the ruleset was saved, which may be
+            different from the current values.</para>
+          </caution>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
+          If the <option>-C</option> option was specified during <emphasis
+          role="bold">shorewall save</emphasis>, then the counters saved by
+          that operation will be restored.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">run</emphasis></term>
+
+        <listitem>
+          <para>Added in Shorewall 4.6.3. Executes
+          <replaceable>command</replaceable> in the context of the generated
+          script passing the supplied <replaceable>parameter</replaceable>s.
+          Normally, the <replaceable>command</replaceable> will be a function
+          declared in <filename>lib.private</filename>.</para>
+
+          <para>Before executing the <replaceable>command</replaceable>, the
+          script will detect the configuration, setting all SW_* variables and
+          will run your <filename>init</filename> extension script with
+          $COMMAND = 'run'.</para>
         </listitem>
       </varlistentry>
 
@@ -818,6 +1006,24 @@
           <emphasis>filename</emphasis> is not given then the state is saved
           in the file specified by the RESTOREFILE option in <ulink
           url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>
+
+          <para>The <option>-C</option> option, added in Shorewall 4.6.5,
+          causes the iptables packet and byte counters to be saved along with
+          the chains and rules.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">savesets</emphasis></term>
+
+        <listitem>
+          <para>Added in shorewall 4.6.8. Performs the same action as the
+          <command>stop</command> command with respect to saving ipsets (see
+          the SAVE_IPSETS option in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink> (5)).
+          This command may be used to proactively save your ipset contents in
+          the event that a system failure occurs prior to issuing a
+          <command>stop</command> command.</para>
         </listitem>
       </varlistentry>
 
@@ -829,6 +1035,19 @@
           arguments:</para>
 
           <variablelist>
+            <varlistentry>
+              <term><emphasis role="bold">bl|blacklists</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 4.6.2. Displays the dynamic chain
+                along with any chains produced by entries in
+                shorewall-blrules(5).The <emphasis role="bold">-x</emphasis>
+                option is passed directly through to iptables and causes
+                actual packet and byte counts to be displayed. Without this
+                option, those counts are abbreviated.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">capabilities</emphasis></term>
 
@@ -976,6 +1195,16 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis role="bold">opens</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 4.5.8. Displays the iptables rules in
+                the 'dynamic' chain created through use of the <command>open
+                </command>command..</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">policies</emphasis></term>
 
@@ -992,7 +1221,9 @@
               <term><emphasis role="bold">routing</emphasis></term>
 
               <listitem>
-                <para>Displays the system's IPv4 routing configuration.</para>
+                <para>Displays the system's IPv4 routing configuration. The -c
+                option causes the route cache to be displayed in addition to
+                the other routing information.</para>
               </listitem>
             </varlistentry>
 
@@ -1042,6 +1273,22 @@
           <para>The <option>-p</option> option causes the connection tracking
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
+
+          <para>The <option>-m</option> option prevents the firewall script
+          from modifying the current routing configuration.</para>
+
+          <para>The <option>-f</option> option was added in Shorewall 4.6.5.
+          If the RESTOREFILE named in <ulink
+          url="shorewall.conf.html">shorewall.conf</ulink>(5) exists, is
+          executable and is not older than the current filewall script, then
+          that saved configuration is restored.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5
+          and is only meaningful when the <option>-f</option> option is also
+          specified. If the previously-saved configuration is restored, and if
+          the <option>-C</option> option was also specified in the <emphasis
+          role="bold">save</emphasis> command, then the packet and byte
+          counters will be restored.</para>
         </listitem>
       </varlistentry>
 
@@ -1073,6 +1320,10 @@
         <listitem>
           <para>Produces a short report about the state of the
           Shorewall-configured firewall.</para>
+
+          <para>The <option>-i </option>option was added in Shorewall 4.6.2
+          and causes the status of each optional or provider interface to be
+          displayed.</para>
         </listitem>
       </varlistentry>
 

Shorewall-lite/shorecap

@@ -38,7 +38,7 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
-#        MODULE_SUFFIX - "o gz ko o.gz ko.gz"
+#        MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not

Shorewall-lite/shorewall-lite.service

@@ -1,20 +1,20 @@
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.4
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
 #
-#     Copyright 2011 Jonathan Underwood (jonathan.underwood@gmail.com)
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
 Description=Shorewall IPv4 firewall (lite)
-After=syslog.target
-After=network.target
+After=network-online.target
+Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-lite
 StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start
+ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
 ExecStop=/sbin/shorewall-lite $OPTIONS stop
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=basic.target

Shorewall-lite/shorewall-lite.service.214

@@ -0,0 +1,20 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#
+[Unit]
+Description=Shorewall IPv4 firewall (lite)
+After=network-online.target
+Conflicts=iptables.service firewalld.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/sysconfig/shorewall-lite
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
+ExecStop=/sbin/shorewall-lite $OPTIONS stop
+
+[Install]
+WantedBy=basic.target

Shorewall-lite/uninstall.sh

@@ -27,14 +27,25 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx  #The Build script inserts the actual version
+PRODUCT=shorewall-lite
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <shorewallrc file> ]"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
 qt()
 {
     "$@" >/dev/null 2>&1
@@ -69,6 +80,42 @@ remove_file() # $1 = file to restore
     fi
 }
 
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
 #
 # Read the RC file
 #
@@ -112,8 +159,12 @@ fi
 
 echo "Uninstalling Shorewall Lite $VERSION"
 
-if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
-   shorewall-lite clear
+[ -n "$SANDBOX" ] && configure=0
+
+if [ $configure -eq 1 ]; then
+    if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
+	shorewall-lite clear
+    fi
 fi
 
 if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
@@ -123,28 +174,34 @@ elif [ -n "$INITFILE" ]; then
 fi
 
 if [ -f "$FIREWALL" ]; then
-    if mywhich updaterc.d ; then
-	updaterc.d shorewall-lite remove
-    elif mywhich insserv ; then
-        insserv -r $FIREWALL
-    elif [ mywhich chkconfig ; then
-	chkconfig --del $(basename $FIREWALL)
-    elif mywhich systemctl ; then
-	systemctl disable shorewall-lite
+    if [ $configure -eq 1 ]; then
+	if mywhich updaterc.d ; then
+	    updaterc.d shorewall-lite remove
+	elif mywhich insserv ; then
+            insserv -r $FIREWALL
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $FIREWALL)
+	fi
     fi
 
     remove_file $FIREWALL
 fi
 
+if [ -n "$SYSTEMD" ]; then
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
+    rm -f $SYSTEMD/shorewall-lite.service
+fi
+
 rm -f ${SBINDIR}/shorewall-lite
 
-rm -rf ${SBINDIR}/shorewall-lite
+rm -rf ${CONFDIR}/shorewall-lite
 rm -rf ${VARDIR}/shorewall-lite
 rm -rf ${SHAREDIR}/shorewall-lite
-rm -rf ${LIBEXEC}/shorewall-lite
+rm -rf ${LIBEXECDIR}/shorewall-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
-[ -n "$SYSTEMD" ] && rm -f  ${SYSTEMD}/shorewall-lite.service
+
+rm -f ${MANDIR}/man5/shorewall-lite*
+rm -f ${MANDIR}/man8/shorewall-lite*
 
 echo "Shorewall Lite Uninstalled"
 
-

Shorewall/Macros/macro.AMQP

@@ -0,0 +1,14 @@
+#
+# Shorewall version 4 - AMQP Macro
+#
+# /usr/share/shorewall/macro.AMQP
+#
+#	This macro handles AMQP traffic.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	5672
+PARAM	-	-	udp	5672

Shorewall/Macros/macro.A_AllowICMPs

@@ -1,13 +1,15 @@
 #
 # Shorewall version 4 - Audited AllowICMPs Macro
 #
-# /usr/share/shorewall/macro.AAllowICMPs
+# /usr/share/shorewall/macro.A_AllowICMPs
 #
 #	This macro A_ACCEPTs needed ICMP types
 #
 ###############################################################################
-#ACTION		SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#					PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION		SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#					PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Needed ICMP types
 

Shorewall/Macros/macro.A_DropDNSrep

@@ -1,13 +1,15 @@
 #
 # Shorewall version 4 - Audited DropDNSrep Macro
 #
-# /usr/share/shorewall/macro.ADropDNSrep
+# /usr/share/shorewall/macro.A_DropDNSrep
 #
 #	This macro silently audites and drops DNS UDP replies
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Late DNS Replies
 

Shorewall/Macros/macro.A_DropUPnP

@@ -1,13 +1,15 @@
 #
 # Shorewall version 4 - ADropUPnP Macro
 #
-# /usr/share/shorewall/macro.ADropUPnP
+# /usr/share/shorewall/macro.A_DropUPnP
 #
 #	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT UPnP
 

Shorewall/Macros/macro.ActiveDir

@@ -7,10 +7,12 @@
 #
 # You can comment out the ports you do not want open
 #
-# 
+#
 ###############################################################################
-#ACTION SOURCE  DEST    PROTO   DEST    SOURCE  RATE    USER/
-#                               PORT(S) PORT(S) LIMIT   GROUP
+?FORMAT 2 
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM   -       -       tcp     389 	#LDAP services
 PARAM   -       -       udp	389  
 PARAM   -       -       tcp     636	#LDAP SSL

Shorewall/Macros/macro.AllowICMPs

@@ -6,8 +6,10 @@
 #	This macro ACCEPTs needed ICMP types
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Needed ICMP types
 

Shorewall/Macros/macro.Amanda

@@ -9,11 +9,12 @@
 #
 ###############################################################################
 ?FORMAT 2
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __AMANDA_HELPER )
- PARAM	-	-	udp	10080 ; helper=amanda
+ PARAM	-	-	udp	10080 { helper=amanda }
 ?else
  PARAM	-	-	udp	10080
 ?endif

Shorewall/Macros/macro.Auth

@@ -6,6 +6,8 @@
 #	This macro handles Auth (identd) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	113

Shorewall/Macros/macro.BGP

@@ -6,6 +6,8 @@
 #	This macro handles BGP4 traffic.
 #
 ###############################################################################
-#ACTION SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S) PORT(S) LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	179	# BGP4

Shorewall/Macros/macro.BLACKLIST

@@ -6,8 +6,10 @@
 #	This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if $BLACKLIST_LOGLEVEL
 blacklog
 ?else

Shorewall/Macros/macro.BitTorrent

@@ -7,9 +7,12 @@
 #
 #	If you are running BitTorrent 3.2 or later, you should use the
 #	BitTorrent32 macro.
+#
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6889
 #
 # It may also be necessary to allow UDP traffic:

Shorewall/Macros/macro.BitTorrent32

@@ -6,8 +6,10 @@
 #	This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6999
 #
 # It may also be necessary to allow UDP traffic:

Shorewall/Macros/macro.CVS

@@ -6,6 +6,8 @@
 #	This macro handles connections to the CVS pserver.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2401

Shorewall/Macros/macro.Citrix

@@ -6,9 +6,11 @@
 #	This macro handles Citrix/ICA traffic (ICA, ICA Browser, CGP a.k.a.
 #	ICA Session Reliability)
 #
-####################################################################################
-#ACTION SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S) PORT(S) LIMIT	GROUP
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1494	# ICA
 PARAM	-	-	udp	1604	# ICA Browser
 PARAM	-	-	tcp	2598	# CGP Session Reliabilty

Shorewall/Macros/macro.DAAP

@@ -7,7 +7,9 @@
 #	The protocol is used by iTunes, Rythmbox and other similar daemons.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3689
 PARAM	-	-	udp	3689

Shorewall/Macros/macro.DCC

@@ -7,6 +7,8 @@
 #	DCC is a distributed spam filtering mechanism.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	6277

Shorewall/Macros/macro.DHCPfwd

@@ -6,7 +6,9 @@
 #	This macro (bidirectional) handles forwarded DHCP traffic
 #
 ###############################################################################
-#ACTION SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S) PORT(S) LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	67:68	67:68	# DHCP
 PARAM	DEST	SOURCE	udp	67:68	67:68	# DHCP

Shorewall/Macros/macro.DNS

@@ -6,7 +6,9 @@
 #	This macro handles DNS traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	53
 PARAM	-	-	tcp	53

Shorewall/Macros/macro.Distcc

@@ -6,6 +6,8 @@
 #	This macro handles connections to the Distributed Compiler service.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3632

Shorewall/Macros/macro.Drop

@@ -11,12 +11,14 @@
 #		Drop	net	all
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 #
-# Don't log 'auth' REJECT
+# Don't log 'auth' DROP
 #
-REJECT	-	-	tcp	113
+DROP	-	-	tcp	113
 #
 # Drop Broadcasts so they don't clutter up the log
 # (broadcasts must *not* be rejected).

Shorewall/Macros/macro.DropDNSrep

@@ -6,8 +6,10 @@
 #	This macro silently drops DNS UDP replies
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Late DNS Replies
 

Shorewall/Macros/macro.DropUPnP

@@ -6,8 +6,10 @@
 #	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT UPnP
 

Shorewall/Macros/macro.Edonkey

@@ -28,7 +28,9 @@
 #	applications such as aMule WebServer or aMuleCMD.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	4662
 PARAM	-	-	udp	4665

Shorewall/Macros/macro.FTP

@@ -7,10 +7,11 @@
 #
 ###############################################################################
 ?FORMAT 2
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __FTP_HELPER  )
- PARAM	-	-	tcp	21 ; helper=ftp
+ PARAM	-	-	tcp	21 { helper=ftp }
 ?else
  PARAM	-	-	tcp	21
 ?endif

Shorewall/Macros/macro.Finger

@@ -7,6 +7,8 @@
 #	your finger information to internet.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	79

Shorewall/Macros/macro.GNUnet

@@ -6,8 +6,10 @@
 #	This macro handles GNUnet (secure peer-to-peer networking) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2086
 PARAM	-	-	udp	2086
 PARAM	-	-	tcp	1080

Shorewall/Macros/macro.GRE

@@ -7,7 +7,9 @@
 #	traffic (RFC 1701)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	47	# GRE
 PARAM	DEST	SOURCE	47	# GRE

Shorewall/Macros/macro.Git

@@ -6,6 +6,8 @@
 #	This macro handles Git traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9418

Shorewall/Macros/macro.Gnutella

@@ -6,7 +6,9 @@
 #	This macro handles Gnutella traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6346
 PARAM	-	-	udp	6346

Shorewall/Macros/macro.Goto-Meeting

@@ -0,0 +1,14 @@
+#
+# Shorewall version 4 - Citrix/Goto Meeting macro
+#
+# /usr/share/shorewall/macro.Goto-Meeting
+#          by Eric Teeter
+#       This macro handles Citrix/Goto Meeting
+#       Assumes that ports 80 and 443 are already open
+#       If needed, use the macros that open Http and Https to reduce redundancy
+####################################################################################
+?FORMAT 2
+####################################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM      -    -       tcp     8200    # Goto Meeting only needed (TCP outbound)

Shorewall/Macros/macro.HKP

@@ -6,6 +6,8 @@
 #	This macro handles OpenPGP HTTP keyserver protocol traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	11371

Shorewall/Macros/macro.HTTP

@@ -6,6 +6,8 @@
 #	This macro handles plaintext HTTP (WWW) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	80

Shorewall/Macros/macro.HTTPS

@@ -6,6 +6,8 @@
 #	This macro handles HTTPS (WWW over SSL) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	443

Shorewall/Macros/macro.ICPV2

@@ -6,6 +6,8 @@
 #	This macro handles Internet Cache Protocol V2 (Squid) traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	3130

Shorewall/Macros/macro.ICQ

@@ -6,6 +6,8 @@
 #	This macro handles ICQ, now called AOL Instant Messenger (or AIM).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5190

Shorewall/Macros/macro.ILO

@@ -0,0 +1,23 @@
+#
+# Shorewall version 4 - ILO Macro
+#
+# /usr/share/shorewall/macro.ILO
+#
+#	This macro handles console redirection with HP ILO 2+,
+#	Use this macro to open access to your ILO interface from management
+#	workstations.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	3002		# Raw serial data
+PARAM	-	-	tcp	9300		# Shared Remote Console
+PARAM	-	-	tcp	17988		# Virtual Media
+PARAM	-	-	tcp	17990		# Console Replay
+HTTP
+HTTPS
+RDP
+SSH
+Telnet						# Remote Console/Telnet

Shorewall/Macros/macro.IMAP

@@ -7,6 +7,8 @@
 #	see macro.IMAPS.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	143

Shorewall/Macros/macro.IMAPS

@@ -7,6 +7,8 @@
 #	(not recommended), see macro.IMAP.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	993

Shorewall/Macros/macro.IPIP

@@ -6,7 +6,9 @@
 #	This macro (bidirectional) handles IPIP capsulation traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	94	# IPIP
 PARAM	DEST	SOURCE	94	# IPIP

Shorewall/Macros/macro.IPMI

@@ -0,0 +1,26 @@
+#
+# Shorewall version 4 - IPMI Macro
+#
+# /usr/share/shorewall/macro.IPMI
+#
+#	This macro handles IPMI console redirection with Asus (AMI),
+#	Dell DRAC5+ (Avocent), and Supermicro (Aten or AMI).
+#	Use this macro to open access to your IPMI interface from management
+#	workstations.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	623		# RMCP
+PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
+PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)
+PARAM	-	-	tcp	5900,5901	# Remote Console (Aten, Dell)
+PARAM	-	-	tcp	7578		# Remote Console (AMI)
+PARAM	-	-	udp	623		# RMCP
+HTTP
+HTTPS
+SNMP
+SSH						# Serial over Lan
+Telnet

Shorewall/Macros/macro.IPP

@@ -6,6 +6,8 @@
 #	This macro handles Internet Printing Protocol (IPP).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	631

Shorewall/Macros/macro.IPPbrd

@@ -6,7 +6,10 @@
 #	This macro handles Internet Printing Protocol (IPP) broadcasts.
 #       If you also need to handle TCP 631 connections in the opposite
 #       direction, use the IPPserver Macro
+#
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	631

Shorewall/Macros/macro.IPPserver

@@ -23,7 +23,9 @@
 #		IPPserver/ACCEPT $FW loc
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	SOURCE	DEST	tcp	631
 PARAM	DEST	SOURCE	udp	631

Shorewall/Macros/macro.IPsec

@@ -6,8 +6,10 @@
 #	This macro (bidirectional) handles IPsec traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	50			# ESP
 PARAM	DEST	SOURCE	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecah

@@ -7,8 +7,10 @@
 #       This is insecure. You should use ESP with encryption for security.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	51			# AH
 PARAM	DEST	SOURCE	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecnat

@@ -6,8 +6,10 @@
 #	This macro (bidirectional) handles IPsec traffic and Nat-Traversal
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	# IKE
 PARAM	-	-	udp	4500	# NAT-T
 PARAM	-	-	50		# ESP

Shorewall/Macros/macro.IRC

@@ -7,11 +7,12 @@
 #
 ###############################################################################
 ?FORMAT 2
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __IRC_HELPER  )
- PARAM	-	-	tcp	6667 ; helper=irc
+ PARAM	-	-	tcp	6667 { helper=irc }
 ?else
  PARAM	-	-	tcp	6667
 ?endif

Shorewall/Macros/macro.JAP

@@ -8,8 +8,10 @@
 #	to browse anonymously!
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	8080 # HTTP port
 PARAM	-	-	tcp	6544 # HTTP port
 PARAM	-	-	tcp	6543 # InfoService port

Shorewall/Macros/macro.JabberPlain

@@ -6,6 +6,8 @@
 #	This macro accepts Jabber traffic (plaintext).
 #
 ###############################################################################
-#TARGET	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5222

Shorewall/Macros/macro.JabberSecure

@@ -6,6 +6,8 @@
 #	This macro accepts Jabber traffic (ssl).
 #
 ###############################################################################
-#TARGET	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5223

Shorewall/Macros/macro.Jabberd

@@ -6,6 +6,8 @@
 #	This macro accepts Jabberd intercommunication traffic
 #
 ###############################################################################
-#TARGET	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5269

Shorewall/Macros/macro.Jetdirect

@@ -6,6 +6,8 @@
 #	This macro handles HP Jetdirect printing.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9100

Shorewall/Macros/macro.Kerberos

@@ -6,7 +6,9 @@
 #	This macro handles Kerberos traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	88
 PARAM	-	-	udp	88

Shorewall/Macros/macro.L2TP

@@ -7,7 +7,9 @@
 #	(RFC 2661)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	1701	# L2TP
 PARAM	DEST	SOURCE	udp	1701	# L2TP

Shorewall/Macros/macro.LDAP

@@ -11,6 +11,8 @@
 #	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	389

Shorewall/Macros/macro.LDAPS

@@ -11,6 +11,8 @@
 #	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	636

Shorewall/Macros/macro.MSNP

@@ -6,6 +6,8 @@
 #	This macro handles MSNP (MicroSoft Notification Protocol)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1863

Shorewall/Macros/macro.MSSQL

@@ -6,6 +6,8 @@
 #	This macro handles MSSQL (Microsoft SQL Server)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1433

Shorewall/Macros/macro.Mail

@@ -12,8 +12,10 @@
 #	the POP3 or IMAP macros.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	25
 PARAM	-	-	tcp	465
 PARAM	-	-	tcp	587

Shorewall/Macros/macro.MongoDB

@@ -0,0 +1,13 @@
+#
+# Shorewall version 4 - MongoDB Macro
+#
+# /usr/share/shorewall/macro.MongoDB
+#
+#	This macro handles MongoDB Daemon/Router traffic.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	27017

Shorewall/Macros/macro.Munin

@@ -6,6 +6,8 @@
 #	This macro handles Munin networked resource monitoring traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	4949

Shorewall/Macros/macro.MySQL

@@ -6,6 +6,8 @@
 #	This macro handles connections to the MySQL server.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3306

Shorewall/Macros/macro.NNTP

@@ -7,6 +7,8 @@
 #	encrypted NNTP, see macro.NNTPS.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	119

Shorewall/Macros/macro.NNTPS

@@ -7,6 +7,8 @@
 #	plaintext NNTP, see macro.NNTP.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	563

Shorewall/Macros/macro.NTP

@@ -7,6 +7,8 @@
 #	For broadcast NTP traffic, use NTPbrd Macro.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	123

Shorewall/Macros/macro.NTPbi

@@ -6,7 +6,9 @@
 #        This macro handles  bi-directional NTP (for NTP peers)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	123
 PARAM	DEST	SOURCE	udp	123

Shorewall/Macros/macro.NTPbrd

@@ -11,7 +11,9 @@
 #	Netfilter doesn't track connections for broadcast traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	RATE	USER/
-#				PORT(S)	PORT(S)	LIMIT	GROUP
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-		-		udp	123
 PARAM	-		-		udp	1024:	123