Remove $OPTIONS from Shorewall-init service files.

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -195,6 +195,10 @@ elif [ -n "${options[VARDIR]}" ]; then
     fi
 fi
 
+if [ -z "${options[SERVICEDIR]}" ]; then
+    $options[SERVICEDIR]="${options[SYSTEMD]}"
+fi
+
 for on in \
     HOST \
     PREFIX \
@@ -209,7 +213,7 @@ for on in \
     INITFILE \
     AUXINITSOURCE \
     AUXINITFILE \
-    SYSTEMD \
+    SERVICEDIR \
     SERVICEFILE \
     SYSCONFFILE \
     SYSCONFDIR \

Shorewall-core/configure.pl

@@ -100,7 +100,7 @@ if ( defined $vendor ) {
     } elsif ( `uname` =~ '^Darwin' ) {
 	$vendor = 'apple';
 	$rcfilename = 'shorewallrc.apple';
-    } elsif ( `uname` =~ '^Cygwin' ) {
+    } elsif ( `uname` =~ /^Cygwin/i ) {
 	$vendor = 'cygwin';
 	$rcfilename = 'shorewallrc.cygwin';
     } else {
@@ -154,6 +154,8 @@ if ( $options{VARLIB} ) {
     $options{VARDIR} = '${VARLIB}/${PRODUCT}';
 }
 
+$options{SERVICEDIR}=$options{SYSTEMD} unless $options{SERVICEDIR};
+
 for ( qw/ HOST
 	  PREFIX
 	  SHAREDIR
@@ -167,8 +169,8 @@ for ( qw/ HOST
 	  INITFILE
 	  AUXINITSOURCE
 	  AUXINITFILE
-	  SYSTEMD
-          SERVICEFILE
+	  SERVICEDIR
+	  SERVICEFILE
 	  SYSCONFFILE
 	  SYSCONFDIR
 	  SPARSE

Shorewall-core/install.sh

@@ -187,7 +187,7 @@ INSTALLD='-D'
 
 if [ -z "$BUILD" ]; then
     case $(uname) in
-	cygwin*)
+	cygwin*|CYGWIN*)
 	    BUILD=cygwin
 	    ;;
 	Darwin)
@@ -198,7 +198,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID)
 
 		case $ID in
-		    fedora|rhel)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian)
@@ -329,9 +329,13 @@ if [ -n "${SYSCONFDIR}" ]; then
     chmod 755 ${DESTDIR}${SYSCONFDIR}
 fi
 
-if [ -n "${SYSTEMD}" ]; then
-    mkdir -p ${DESTDIR}${SYSTEMD}
-    chmod 755 ${DESTDIR}${SYSTEMD}
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+if [ -n "${SERVICEDIR}" ]; then
+    mkdir -p ${DESTDIR}${SERVICEDIR}
+    chmod 755 ${DESTDIR}${SERVICEDIR}
 fi
 
 mkdir -p ${DESTDIR}${SBINDIR}

Shorewall-core/lib.cli

@@ -271,6 +271,19 @@ show_classifiers() {
 
 }
 
+#
+# Display blacklist chains
+#
+show_bl() {
+    $g_tool -L $g_ipt_options | \
+	awk 'BEGIN           {prnt=0; };
+            /^$/             {if (prnt == 1) print ""; prnt=0; };
+            /Chain .*~ /     {prnt=1; };
+            /Chain dynamic / {prnt=1; };
+            {if (prnt == 1)  print; };
+            END {if (prnt == 1 ) print "" };'
+}
+
 #
 # Watch the Firewall Log
 #
@@ -354,6 +367,17 @@ resolve_arptables() {
     esac
 }
 
+#
+# Try to run the 'savesets' command
+#
+savesets() {
+    local supported
+
+    supported=$(run_it ${VARDIR}/firewall help | fgrep savesets )
+
+    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${g_restorepath}-ipsets
+}
+
 #
 # Save currently running configuration
 #
@@ -415,45 +439,47 @@ do_save() {
 	    ;;
     esac
 
-    case ${SAVE_IPSETS:=No} in
-	[Yy]es)
-	    case ${IPSET:=ipset} in
-		*/*)
-		    if [ ! -x "$IPSET" ]; then
-			error_message "ERROR: IPSET=$IPSET does not exist or is not executable - ipsets are not saved"
-			IPSET=
+    if ! savesets;  then
+	case ${SAVE_IPSETS:=No} in
+	    [Yy]es)
+		case ${IPSET:=ipset} in
+		    */*)
+			if [ ! -x "$IPSET" ]; then
+			    error_message "ERROR: IPSET=$IPSET does not exist or is not executable - ipsets are not saved"
+			    IPSET=
+			fi
+			;;
+		    *)
+			IPSET="$(mywhich $IPSET)"
+			[ -n "$IPSET" ] || error_message "ERROR: The ipset utility cannot be located - ipsets are not saved"
+			;;
+		esac
+
+		if [ -n "$IPSET" ]; then
+		    if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then
+			#
+			# The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny
+			#
+			hack='| grep -v /31'
+		    else
+			hack=
 		    fi
-		    ;;
-		*)
-		    IPSET="$(mywhich $IPSET)"
-		    [ -n "$IPSET" ] || error_message "ERROR: The ipset utility cannot be located - ipsets are not saved"
-		    ;;
-	    esac
 
-	    if [ -n "$IPSET" ]; then
-		if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then
-                    #
-                    # The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny
-                    #
-		    hack='| grep -v /31'
-		else
-		    hack=
+		    if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then
+			#
+			# Don't save an 'empty' file
+			#
+			grep -qE -- '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${g_restorepath}-ipsets
+		    fi
 		fi
-
-		if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then
-                    #
-                    # Don't save an 'empty' file
-                    #
-		    grep -qE -- '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${g_restorepath}-ipsets
-		fi
-	    fi
-	    ;;
-	[Nn]o)
-	    ;;
-	*)
-	    error_message "WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS"
-	    ;;
-    esac
+		;;
+	    [Nn]o)
+		;;
+	    *)
+		error_message "WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS"
+		;;
+	esac
+    fi
 
     return $status
 }
@@ -467,6 +493,8 @@ save_config() {
 
     [ -x $iptables_save ] || echo "$iptables-save does not exist or is not executable" >&2
 
+    [ -n "$g_counters" ] && iptables_save="$iptables_save --counters"
+
     if product_is_started ; then
 	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}
 
@@ -1189,7 +1217,13 @@ show_command() {
 	    echo "$g_product $SHOREWALL_VERSION events at $g_hostname - $(date)"
 	    echo
 	    show_events
-	    ;;	    
+	    ;;
+	bl|blacklists)
+	    [ $# -gt 1 ] && usage 1
+	    echo "$g_product $SHOREWALL_VERSION blacklist chains at $g_hostname - $(date)"
+	    echo
+	    show_bl;
+	    ;;
 	*)
 	    case "$g_program" in
 		*-lite)
@@ -1451,10 +1485,22 @@ do_dump_command() {
 	$g_tool -t rawpost -L $g_ipt_options
     fi
 
-    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
-    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+    local count
+    local max
 
-    heading "Conntrack Table ($count out of $max)"
+    if [ -f /proc/sys/net/netfilter/nf_conntrack_count ]; then
+	count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+	max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+
+	heading "Conntrack Table ($count out of $max)"
+    elif [ -f /proc/sys/net/ipv4/netfilter/ip_conntrack_count ]; then
+	count=$(cat /proc/sys/net/ipv4/netfilter/ip_conntrack_count)
+	max=$(cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max)
+
+	heading "Conntrack Table ($count out of $max)"
+    else
+	heading "Conntrack Table"
+    fi
 
     if [ $g_family -eq 4 ]; then
     	[ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack
@@ -1580,6 +1626,15 @@ restore_command() {
 			    g_noroutes=Yes
 			    option=${option#n}
 			    ;;
+			p*)
+			    [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system"
+			    g_purge=Yes
+			    option=${option%p}
+			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -2952,9 +3007,74 @@ show_status() {
 
 }
 
+interface_status() {
+    case $(cat $1) in
+	0)
+	    echo Enabled
+	    ;;
+	1)
+	    echo Disabled
+	    ;;
+	*)
+	    echo Unknown
+	    ;;
+    esac
+}
+
+show_interfaces() {
+    local f
+    local interface
+    local printed
+
+    for f in ${VARDIR}/*.status; do
+	interface=$(basename $f)
+	echo "   Interface ${interface%.status} is $(interface_status $f)"
+	printed=Yes
+    done
+
+    [ -n "$printed" ] && echo
+}
+
 status_command() {
+     local finished
+    finished=0
+    local option
+    local interfaces
+
+    while [ $finished -eq 0 -a $# -gt 0 ]; do
+	option=$1
+	case $option in
+	    -*)
+		option=${option#-}
+
+		while [ -n "$option" ]; do
+		    case $option in
+			-)
+			    finished=1
+			    option=
+			    ;;
+			i*)
+			    interfaces=Yes
+			    option=${option#i}
+			    ;;
+			*)
+			    usage 1
+			    ;;
+		    esac
+		done
+		shift
+		;;
+	    *)
+		finished=1
+		;;
+	esac
+    done
+
+    [ $# -eq 0 ] || usage 1
+
     [ $VERBOSITY -ge 1 ] && echo "${g_product}-$SHOREWALL_VERSION Status at $g_hostname - $(date)" && echo
     show_status
+    [ -n "$interfaces" ] && show_interfaces
     exit $status
 }
 
@@ -2999,11 +3119,45 @@ reject_command() {
 }
 
 save_command() {
+    local finished
+    finished=0
+
+    shift
+
+    while [ $finished -eq 0 -a $# -gt 0 ]; do
+	option=$1
+	case $option in
+	    -*)
+		option=${option#-}
+
+		while [ -n "$option" ]; do
+		    case $option in
+			-)
+			    finished=1
+			    option=
+			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
+			*)
+			    usage 1
+			    ;;
+		    esac
+		done
+		shift
+		;;
+	    *)
+		finished=1
+		;;
+	esac
+    done
+
     case $# in
-	1)
+	0)
 	    ;;
-	2)
-	    RESTOREFILE="$2"
+	1)
+	    RESTOREFILE="$1"
 	    validate_restorefile '<restore file>'
 	    ;;
 	*)
@@ -3298,7 +3452,11 @@ start_command() {
 	[ -n "$g_nolock" ] || mutex_on
 
 	if [ -x ${VARDIR}/firewall ]; then
-	    run_it ${VARDIR}/firewall $g_debugging start
+	    if [ -n "$g_fast" -a -x ${VARDIR}/${RESTOREFILE} -a ! ${VARDIR}/firewall -nt ${VARDIR}/${RESTOREFILE} ]; then
+		run_it ${VARDIR}/${RESTOREFILE} $g_debugging restore
+	    else
+		run_it ${VARDIR}/firewall $g_debugging start
+	    fi
 	    rc=$?
 	else
 	    error_message "${VARDIR}/firewall is missing or is not executable"
@@ -3334,6 +3492,14 @@ start_command() {
 			    finished=1
 			    option=
 			    ;;
+			f*)
+			    g_fast=Yes
+			    option=${option#f}
+			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
 			p*)
 			    [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system"
 			    g_purge=Yes
@@ -3395,6 +3561,10 @@ restart_command() {
 			    g_purge=Yes
 			    option=${option%p}
 			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -3431,6 +3601,14 @@ restart_command() {
     return $rc
 }
 
+run_command() {
+    if [ -x ${VARDIR}/firewall ] ; then
+	run_it ${VARDIR}/firewall $g_debugging $@
+    else
+	fatal_error "${VARDIR}/firewall does not exist or is not executable"
+    fi
+}
+
 #
 # Give Usage Information
 #
@@ -3460,12 +3638,14 @@ usage() # $1 = exit status
     echo "   logwatch [<refresh interval>]"
     echo "   reject <address> ..."
     echo "   reset [ <chain> ... ]"
-    echo "   restart [ -n ] [ -p ] [ -f ] [ <directory> ]"
-    echo "   restore [ -n ] [ <file name> ]"
-    echo "   save [ <file name> ]"
+    echo "   restart [ -n ] [ -p ] [ -f ] [ -C ] [ <directory> ]"
+    echo "   restore [ -n ] [ -p ] [ -C ] [ <file name> ]"
+    echo "   run <command> [ <parameter> ... ]"
+    echo "   save [ -C ] [ <file name> ]"
     echo "   [ show | list | ls ] [ -b ] [ -x ] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]"
     echo "   [ show | list | ls ] [ -f ] capabilities"
     echo "   [ show | list | ls ] arptables"
+    echo "   [ show | list | ls ] [ -x ] {bl|blacklists}"
     echo "   [ show | list | ls ] classifiers"
     echo "   [ show | list | ls ] config"
     echo "   [ show | list | ls ] connections"
@@ -3486,9 +3666,9 @@ usage() # $1 = exit status
     echo "   [ show | list | ls ] tc [ device ]"
     echo "   [ show | list | ls ] vardir"
     echo "   [ show | list | ls ] zones"
-    echo "   start [ -f ] [ -p ] [ <directory> ]"
+    echo "   start [ -f ] [ -p ] [ -C ] [ <directory> ]"
     echo "   stop"
-    echo "   status"
+    echo "   status [ -i ]"
     echo "   version [ -a ]"
     echo
     exit $1
@@ -3538,6 +3718,7 @@ shorewall_cli() {
     g_directives=
     g_inline=
     g_tcrules=
+    g_counters=
 
     VERBOSE=
     VERBOSITY=1
@@ -3733,16 +3914,21 @@ shorewall_cli() {
 		fatal_error "$g_product is not running"
 	    fi
 	    ;;
+	run)
+	    [ $# -gt 1 ] || fatal_error "Missing function name"
+	    get_config Yes
+	    run_command $@
+	    ;;
 	show|list|ls)
 	    get_config Yes No Yes
     	    shift
     	    show_command $@
 	    ;;
 	status)
-	    [ $# -eq 1 ] || usage 1
 	    [ "$(id -u)" != 0 ] && fatal_error "The status command may only be run by root"
 	    get_config
-	    status_command
+	    shift
+	    status_command $@
 	    ;;
 	dump)
 	    get_config Yes No Yes

Shorewall-core/lib.common

@@ -157,6 +157,7 @@ run_it() {
 	[ -n "$g_timestamp" ]  && options=${options}t
 	[ -n "$g_purge" ]      && options=${options}p
 	[ -n "$g_recovering" ] && options=${options}r
+	[ -n "$g_counters" ]   && options=${options}c
 
 	options="${options}V $VERBOSITY"
 
@@ -172,6 +173,7 @@ run_it() {
 error_message() # $* = Error Message
 {
    echo "   $@" >&2
+   return 1
 }
 
 #

Shorewall-core/shorewallrc.apple

@@ -14,7 +14,7 @@ INITDIR=                               #Unused on OS X
 INITFILE=                              #Unused on OS X
 INITSOURCE=                            #Unused on OS X
 ANNOTATED=                             #Unused on OS X
-SYSTEMD=                               #Unused on OS X
+SYSTEMDDIR=                            #Unused on OS X
 SERVICEFILE=                           #Unused on OS X
 SYSCONFDIR=                            #Unused on OS X
 SPARSE=Yes                             #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.

Shorewall-core/shorewallrc.archlinux

@@ -15,7 +15,7 @@ INITFILE=                              #Name of the product's installed SysV ini
 INITSOURCE=                            #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                             #If non-zero, annotated configuration files are installed
 SYSCONFDIR=                            #Directory where SysV init parameter files are installed
-SYSTEMD=/usr/lib/systemd/system        #Directory where .service files are installed (systems running systemd only)
+SYSTEMDDIR=/usr/lib/systemd/system     #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                           #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SPARSE=                                #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                        #Directory where product variable data is stored.

Shorewall-core/shorewallrc.cygwin

@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                   #Unused on Cygwin
 INITFILE=                             #Unused on Cygwin
 INITSOURCE=                           #Unused on Cygwin
 ANNOTATED=                            #Unused on Cygwin
-SYSTEMD=                              #Unused on Cygwin
+SYSTEMDDIR=                           #Unused on Cygwin
 SERVICEFILE=                          #Unused on Cygwin
 SYSCONFDIR=                           #Unused on Cygwin
 SPARSE=Yes                            #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.

Shorewall-core/shorewallrc.debian

@@ -17,7 +17,7 @@ ANNOTATED=                              #If non-zero, annotated configuration fi
 SYSCONFFILE=default.debian              #Name of the distributed file to be installed in $SYSCONFDIR
 SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default                 #Directory where SysV init parameter files are installed
-SYSTEMD=                                #Directory where .service files are installed (systems running systemd only)
+SYSTEMDDIR=                             #Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes                              #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.

Shorewall-core/shorewallrc.default

@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                     #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.sh                      #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SYSTEMD=                                #Directory where .service files are installed (systems running systemd only)
+SYSTEMDDIR=                             #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                            #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=                            #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=                             #Directory where SysV init parameter files are installed

Shorewall-core/shorewallrc.redhat

@@ -14,7 +14,7 @@ INITDIR=/etc/rc.d/init.d                #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.fedora.sh               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SYSTEMD=/lib/systemd/system             #Directory where .service files are installed (systems running systemd only)
+SYSTEMDDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
 SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed as $SYSCONFDIR/$PRODUCT
 SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter files are installed

Shorewall-core/shorewallrc.slackware

@@ -15,7 +15,7 @@ AUXINITSOURCE=init.slackware.firewall.sh   #Name of the distributed file to be i
 AUXINITFILE=rc.firewall                    #Name of the product's installed SysV init script
 INITSOURCE=init.slackware.$PRODUCT.sh      #Name of the distributed file to be installed as a second SysV init script
 INITFILE=rc.$PRODUCT                       #Name of the product's installed second init script
-SYSTEMD=                                   #Name of the directory where .service files are installed (systems running systemd only)
+SYSTEMDDIR=                                #Name of the directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                               #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=                               #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=                                #Name of the directory where SysV init parameter files are installed.

Shorewall-core/shorewallrc.suse

@@ -8,13 +8,13 @@ CONFDIR=/etc                                          #Directory where subsystem
 SHAREDIR=${PREFIX}/share                              #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/lib                              #Directory for executable scripts.
 PERLLIBDIR=${PREFIX}/lib/perl5/vendor_perl/5.14.2     #Directory to install Shorewall Perl module directory
-SBINDIR=/sbin                                         #Directory where system administration programs are installed
+SBINDIR=/usr/sbin                                     #Directory where system administration programs are installed
 MANDIR=${SHAREDIR}/man/                               #Directory where manpages are installed.
 INITDIR=/etc/init.d                                   #Directory where SysV init scripts are installed.
 INITFILE=$PRODUCT                                     #Name of the product's SysV init script
 INITSOURCE=init.suse.sh                               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                                            #If non-zero, annotated configuration files are installed
-SYSTEMD=                                              #Directory where .service files are installed (systems running systemd only)
+SYSTEMDDIR=                                           #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                      		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=sysconfig                                 #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=/etc/sysconfig/                            #Directory where SysV init parameter files are installed

Shorewall-init/init.debian.sh

@@ -123,6 +123,17 @@ shorewall_start () {
 
   echo "done."
 
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+
+      echo -n "Restoring ipsets: "
+
+      if ! ipset -R < "$SAVE_IPSETS"; then
+	  echo_notdone
+      fi
+
+      echo "done."
+  fi
+
   return 0
 }
 
@@ -142,6 +153,20 @@ shorewall_stop () {
 
   echo "done."
 
+  if [ -n "$SAVE_IPSETS" ]; then
+
+      echo "Saving ipsets: "
+
+      mkdir -p $(dirname "$SAVE_IPSETS")
+      if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+      else
+	  echo_notdone
+      fi
+
+      echo "done."
+  fi
+
   return 0
 }
 

Shorewall-init/install.sh

@@ -35,6 +35,7 @@ usage() # $1 = exit status
     echo "usage: $ME [ <configuration-file> ]"
     echo "       $ME -v"
     echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
@@ -105,9 +106,12 @@ PRODUCT=shorewall-init
 T='-T'
 
 finished=0
+configure=1
 
 while [ $finished -eq 0 ] ; do
-    case "$1" in
+    option="$1"
+
+    case "$option" in
 	-*)
 	    option=${option#-}
 
@@ -120,6 +124,10 @@ while [ $finished -eq 0 ] ; do
 			echo "Shorewall-init Firewall Installer Version $VERSION"
 			exit 0
 			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
 		    *)
 			usage 1
 			;;
@@ -176,6 +184,8 @@ for var in SHAREDIR LIBEXECDIR CONFDIR SBINDIR VARLIB VARDIR; do
     require $var
 done
 
+[ -n "$SANDBOX" ] && configure=0
+
 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 
 if [ -z "$BUILD" ]; then
@@ -191,7 +201,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID=)
 
 		case $ID in
-		    fedora|rhel)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian|ubuntu)
@@ -306,6 +316,7 @@ fi
 # Install the Firewall Script
 #
 if [ -n "$INITFILE" ]; then
+    mkdir -p ${DESTDIR}${INITDIR}
     install_file $INITSOURCE ${DESTDIR}${INITDIR}/$INITFILE 0544
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${INITDIR}/$INITFILE
     
@@ -319,13 +330,17 @@ fi
 #
 # Install the .service file
 #
-if [ -n "$SYSTEMD" ]; then
-    mkdir -p ${DESTDIR}${SYSTEMD}
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+if [ -n "$SERVICEDIR" ]; then
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
-    if [ -n "$DESTDIR" ]; then
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
+    if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${SBINDIR}
         chmod 755 ${DESTDIR}${SBINDIR}
     fi
@@ -366,14 +381,24 @@ if [ $HOST = debian ]; then
     if [ -n "${DESTDIR}" ]; then
 	mkdir -p ${DESTDIR}/etc/network/if-up.d/
 	mkdir -p ${DESTDIR}/etc/network/if-down.d/
+	mkdir -p ${DESTDIR}/etc/network/if-post-down.d/
+    elif [ $configure -eq 0 ]; then
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-post-down.d/
     fi
 
-    if [ ! -f ${DESTDIR}/etc/default/shorewall-init ]; then
+    if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
 	    mkdir ${DESTDIR}/etc/default
 	fi
 
-	install_file sysconfig ${DESTDIR}/etc/default/shorewall-init 0644
+	if [ $configure -eq 1 ]; then
+	    install_file sysconfig ${DESTDIR}/etc/default/shorewall-init 0644
+	else
+	    mkdir -p ${DESTDIR}${CONFDIR}/default
+	    install_file sysconfig ${DESTDIR}${CONFDIR}/default/shorewall-init 0644
+	fi
     fi
 
     IFUPDOWN=ifupdown.debian.sh
@@ -384,7 +409,7 @@ else
 	if [ -z "$RPM" ]; then
 	    if [ $HOST = suse ]; then
 		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-up.d
-		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d
+		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-down.d
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
@@ -415,17 +440,33 @@ mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
-    install_file ifupdown ${DESTDIR}/etc/NetworkManager/dispatcher.d/01-shorewall 0544
+    if [ $configure -eq 1 ]; then
+	install_file ifupdown ${DESTDIR}/etc/NetworkManager/dispatcher.d/01-shorewall 0544
+    else
+	mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
+	install_file ifupdown ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall 0544
+    fi
 fi
 
 case $HOST in
     debian)
-	install_file ifupdown ${DESTDIR}/etc/network/if-up.d/shorewall 0544
-	install_file ifupdown ${DESTDIR}/etc/network/if-down.d/shorewall 0544
-	install_file ifupdown ${DESTDIR}/etc/network/if-post-down.d/shorewall 0544
+	if [ $configure -eq 1 ]; then
+	    install_file ifupdown ${DESTDIR}/etc/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}/etc/network/if-down.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}/etc/network/if-post-down.d/shorewall 0544
+	else
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-down.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-post-down.d/shorewall 0544
+	fi
 	;;
     suse)
 	if [ -z "$RPM" ]; then
+	    if [ $configure -eq 0 ]; then
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-up.d/
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d/
+	    fi
+
 	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-up.d/shorewall 0544
 	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-down.d/shorewall 0544
 	fi
@@ -453,7 +494,7 @@ case $HOST in
 esac
 
 if [ -z "$DESTDIR" ]; then
-    if [ -n "$first_install" ]; then
+    if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian ]; then
 	    if mywhich insserv; then
 		if insserv ${INITDIR}/shorewall-init; then
@@ -476,7 +517,7 @@ if [ -z "$DESTDIR" ]; then
 	    # not by the installer
 	    /bin/true
 	else
-	    if [ -n "$SYSTEMD" ]; then
+	    if [ -n "$SERVICEDIR" ]; then
 		if systemctl enable shorewall-init.service; then
 		    echo "Shorewall Init will start automatically at boot"
 		fi
@@ -505,7 +546,7 @@ if [ -z "$DESTDIR" ]; then
 	fi
     fi
 else
-    if [ -n "$first_install" ]; then
+    if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian ]; then
 	    if [ -n "${DESTDIR}" ]; then
 		mkdir -p ${DESTDIR}/etc/rcS.d

Shorewall-init/shorewall-init

@@ -63,18 +63,19 @@ shorewall_start () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
+      if [ -x ${STATEDIR}/firewall ]; then
           #
 	  # Run in a sub-shell to avoid name collisions
 	  #
 	  (
-	      if ! ${STATEDIR}/$PRODUCT/firewall status > /dev/null 2>&1; then
-		  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} stop || exit 1
+	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop || exit 1
 	      else
 		  exit 1
 	      fi
 	  )
       else
+          echo ERROR:  ${STATEDIR}/firewall does not exist or is not executable!
 	  exit 1
       fi
   done
@@ -95,8 +96,8 @@ shorewall_stop () {
   for PRODUCT in $PRODUCTS; do
       setstatedir
 
-      if [ -x ${STATEDIR}/$PRODUCT/firewall ]; then
-	  ${STATEDIR}/$PRODUCT/firewall ${OPTIONS} clear || exit 1
+      if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear || exit 1
       fi
   done
 

Shorewall-init/shorewall-init.service

@@ -1,20 +1,20 @@
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.4
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
 #
-#     Copyright 2011 Jonathan Underwood (jonathan.underwood@gmail.com)
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
-Description=Shorewall IPv4 firewall
-After=syslog.target
+Description=Shorewall IPv4 firewall (bootup security)
 Before=network.target
+Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-init
 StandardOutput=syslog
-ExecStart=/sbin/shorewall-init $OPTIONS start
-ExecStop=/sbin/shorewall-init $OPTIONS stop
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=basic.target

Shorewall-init/shorewall-init.service.214

@@ -0,0 +1,21 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#
+[Unit]
+Description=Shorewall IPv4 firewall (bootup security)
+Before=network-pre.target
+Wants=network-pre.target
+Conflicts=iptables.service firewalld.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/sysconfig/shorewall-init
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
+
+[Install]
+WantedBy=basic.target

Shorewall-init/uninstall.sh

@@ -1,4 +1,4 @@
-\#!/bin/sh
+#!/bin/sh
 #
 # Script to back uninstall Shoreline Firewall
 #
@@ -69,6 +69,42 @@ remove_file() # $1 = file to restore
     fi
 }
 
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
 #
 # Read the RC file
 #
@@ -114,22 +150,29 @@ fi
 
 echo "Uninstalling Shorewall Init $VERSION"
 
+[ -n "$SANDBOX" ] && configure=0
+
 INITSCRIPT=${CONFDIR}/init.d/shorewall-init
 
 if [ -f "$INITSCRIPT" ]; then
-    if mywhich updaterc.d ; then
-	updaterc.d shorewall-init remove
-    elif mywhich insserv ; then
-        insserv -r $INITSCRIPT
-    elif mywhich chkconfig ; then
-	chkconfig --del $(basename $INITSCRIPT)
-    elif mywhich systemctl ; then
-	systemctl disable shorewall-init
+    if [ $configure -eq 1 ]; then
+	if mywhich updaterc.d ; then
+	    updaterc.d shorewall-init remove
+	elif mywhich insserv ; then
+            insserv -r $INITSCRIPT
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $INITSCRIPT)
+	fi
     fi
 
     remove_file $INITSCRIPT
 fi
 
+if [ -n "$SYSTEMD" ]; then
+    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
+    rm -f $SYSTEMD/shorewall-init.service
+fi
+
 [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
 [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
 
@@ -159,8 +202,9 @@ if [ -d ${CONFDIR}/ppp ]; then
     done
 fi
 
+rm -f  ${SBINDIR}/shorewall-init
 rm -rf ${SHAREDIR}/shorewall-init
-rm -rf ${LIBEXEC}/shorewall-init
+rm -rf ${LIBEXECDIR}/shorewall-init
 
 echo "Shorewall Init Uninstalled"
 

Shorewall-lite/init.fedora.sh

@@ -39,7 +39,7 @@ fi
 
 start() {
     echo -n $"Starting Shorewall: "
-    $shorewall $OPTIONS start 2>&1 | $logger
+    $shorewall $OPTIONS start $STARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile
@@ -69,7 +69,7 @@ restart() {
 # Note that we don't simply stop and start since shorewall has a built in
 # restart which stops the firewall if running and then starts it.
     echo -n $"Restarting Shorewall: "
-    $shorewall $OPTIONS restart 2>&1 | $logger
+    $shorewall $OPTIONS restart $RESTARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile

Shorewall-lite/install.sh

@@ -30,6 +30,7 @@ usage() # $1 = exit status
     echo "usage: $ME [ <configuration-file> ]"
     echo "       $ME -v"
     echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
@@ -113,9 +114,13 @@ fi
 # Parse the run line
 #
 finished=0
+configure=1
 
 while [ $finished -eq 0 ] ; do
-    case "$1" in
+
+    option=$1
+
+    case "$option" in
 	-*)
 	    option=${option#-}
 
@@ -128,6 +133,10 @@ while [ $finished -eq 0 ] ; do
 			echo "$Product Firewall Installer Version $VERSION"
 			exit 0
 			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
 		    *)
 			usage 1
 			;;
@@ -186,6 +195,8 @@ done
 
 PATH=${SBINDIR}:/bin:/usr${SBINDIR}:/usr/bin:/usr/local/bin:/usr/local${SBINDIR}
 
+[ -n "$SANDBOX" ] && configure=0
+
 #
 # Determine where to install the firewall script
 #
@@ -195,7 +206,7 @@ T='-T'
 
 if [ -z "$BUILD" ]; then
     case $(uname) in
-	cygwin*)
+	cygwin*|CYGWIN*)
 	    BUILD=cygwin
 	    ;;
 	Darwin)
@@ -206,7 +217,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID)
 
 		case $ID in
-		    fedora|rhel)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian)
@@ -242,7 +253,7 @@ if [ -z "$BUILD" ]; then
 fi
 
 case $BUILD in
-    cygwin*)
+    cygwin*|CYGWIN*)
 	OWNER=$(id -un)
 	GROUP=$(id -gn)
 	;;
@@ -346,6 +357,7 @@ fi
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
 install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
+[ -n "${INITFILE}" ] && install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
 
 echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
 
@@ -358,7 +370,7 @@ mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${VARDIR}
 
 chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
-chmod 755 ${DESTDIR}/usr/share/$PRODUCT
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
 
 if [ -n "$DESTDIR" ]; then
     mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
@@ -380,12 +392,16 @@ fi
 #
 # Install the .service file
 #
-if [ -n "$SYSTEMD" ]; then
-    mkdir -p ${DESTDIR}${SYSTEMD}
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+if [ -n "$SERVICEDIR" ]; then
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
 #
 # Install the config file
@@ -466,18 +482,18 @@ done
 if [ -d manpages ]; then
     cd manpages
 
-    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${SHAREDIR}/man/man5/ ${DESTDIR}${SHAREDIR}/man/man8/
+    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
 
     for f in *.5; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${SHAREDIR}/man/man5/$f.gz
-	echo "Man page $f.gz installed to ${DESTDIR}${SHAREDIR}/man/man5/$f.gz"
+	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
     for f in *.8; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${SHAREDIR}/man/man8/$f.gz
-	echo "Man page $f.gz installed to ${DESTDIR}${SHAREDIR}/man/man8/$f.gz"
+	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
     cd ..
@@ -499,7 +515,7 @@ chmod 644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 # Remove and create the symbolic link to the init script
 #
 
-if [ -z "$DESTDIR" ]; then
+if [ -z "${DESTDIR}" -a -n "${INITFILE}" ]; then
     rm -f ${SHAREDIR}/$PRODUCT/init
     ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
 fi
@@ -526,8 +542,8 @@ if [ ${SHAREDIR} != /usr/share ]; then
     eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SBINDIR}/$PRODUCT
 fi
 
-if [ -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
-    if [ -n "$SYSTEMD" ]; then
+if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
+    if [ -n "$SERVICEDIR" ]; then
 	if systemctl enable ${PRODUCT}.service; then
 	    echo "$Product will start automatically at boot"
 	fi

Shorewall-lite/manpages/shorewall-lite.xml

@@ -299,7 +299,7 @@
 
       <arg><option>-n</option></arg>
 
-      <arg><option>-p</option></arg>
+      <arg><option>-p</option><arg><option>-C</option></arg></arg>
 
       <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
@@ -314,6 +314,8 @@
 
       <arg choice="plain"><option>restore</option></arg>
 
+      <arg><option>-C</option></arg>
+
       <arg><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
@@ -325,7 +327,23 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>save</option></arg>
+      <arg choice="plain"><option>run</option></arg>
+
+      <arg choice="plain">function</arg>
+
+      <arg><replaceable>parameter ...</replaceable></arg>
+    </cmdsynopsis>
+
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg
+      choice="plain"><option>save</option><arg><option>-C</option></arg></arg>
 
       <arg choice="opt"><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
@@ -352,6 +370,20 @@
       rep="repeat"><replaceable>chain</replaceable></arg></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="opt"><option>show | list | ls </option></arg>
+
+      <arg><option>-x</option></arg>
+
+      <arg choice="plain"><option>{bl|blacklists}</option></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -445,6 +477,10 @@
       <arg><option>-n</option></arg>
 
       <arg><option>-p</option></arg>
+
+      <arg><option>-f</option></arg>
+
+      <arg><option>-C</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -465,7 +501,8 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>status</option></arg>
+      <arg choice="plain"><arg
+      choice="plain"><option>status</option><arg><option>-i</option></arg></arg></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -496,8 +533,9 @@
 
     <para>The nolock <option>option</option> prevents the command from
     attempting to acquire the Shorewall-lite lockfile. It is useful if you
-    need to include <command>shorewall</command> commands in
-    <filename>/etc/shorewall/started</filename>.</para>
+    need to include <command>shorewall</command> commands in the
+    <filename>started</filename> <ulink
+    url="../shorewall_extension_scripts.html">extension script</ulink>.</para>
 
     <para>The <emphasis>options</emphasis> control the amount of output that
     the command produces. They consist of a sequence of the letters <emphasis
@@ -508,8 +546,8 @@
     role="bold">v</emphasis> adds one to the effective verbosity and each
     <emphasis role="bold">q</emphasis> subtracts one from the effective
     VERBOSITY. Alternately, <emphasis role="bold">v</emphasis> may be followed
-    immediately with one of -1,0,1,2 to specify a specify VERBOSITY. There may
-    be no white-space between <emphasis role="bold">v</emphasis> and the
+    immediately with one of -1,0,1,2 to specify VERBOSITY. There may be no
+    white-space between <emphasis role="bold">v</emphasis> and the
     VERBOSITY.</para>
 
     <para>The <emphasis>options</emphasis> may also include the letter
@@ -789,6 +827,12 @@
           <para>The <option>-p</option> option causes the connection tracking
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
+          If the specified (or implicit) firewall script is the one that
+          generated the current running configuration, then the running
+          netfilter configuration will be reloaded as is so as to preserve the
+          iptables packet and byte counters.</para>
         </listitem>
       </varlistentry>
 
@@ -804,6 +848,36 @@
           <emphasis>filename</emphasis> is given then Shorewall-lite will be
           restored from the file specified by the RESTOREFILE option in <ulink
           url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>
+
+          <caution>
+            <para>If your iptables ruleset depends on variables that are
+            detected at run-time, either in your params file or by
+            Shorewall-generated code, <command>restore</command> will use the
+            values that were current when the ruleset was saved, which may be
+            different from the current values.</para>
+          </caution>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
+          If the <option>-C</option> option was specified during <emphasis
+          role="bold">shorewall save</emphasis>, then the counters saved by
+          that operation will be restored.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">run</emphasis></term>
+
+        <listitem>
+          <para>Added in Shorewall 4.6.3. Executes
+          <replaceable>command</replaceable> in the context of the generated
+          script passing the supplied <replaceable>parameter</replaceable>s.
+          Normally, the <replaceable>command</replaceable> will be a function
+          declared in <filename>lib.private</filename>.</para>
+
+          <para>Before executing the <replaceable>command</replaceable>, the
+          script will detect the configuration, setting all SW_* variables and
+          will run your <filename>init</filename> extension script with
+          $COMMAND = 'run'.</para>
         </listitem>
       </varlistentry>
 
@@ -818,6 +892,10 @@
           <emphasis>filename</emphasis> is not given then the state is saved
           in the file specified by the RESTOREFILE option in <ulink
           url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>
+
+          <para>The <option>-C</option> option, added in Shorewall 4.6.5,
+          causes the iptables packet and byte counters to be saved along with
+          the chains and rules.</para>
         </listitem>
       </varlistentry>
 
@@ -829,6 +907,19 @@
           arguments:</para>
 
           <variablelist>
+            <varlistentry>
+              <term><emphasis role="bold">bl|blacklists</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 4.6.2. Displays the dynamic chain
+                along with any chains produced by entries in
+                shorewall-blrules(5).The <emphasis role="bold">-x</emphasis>
+                option is passed directly through to iptables and causes
+                actual packet and byte counts to be displayed. Without this
+                option, those counts are abbreviated.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">capabilities</emphasis></term>
 
@@ -1042,6 +1133,22 @@
           <para>The <option>-p</option> option causes the connection tracking
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
+
+          <para>The <option>-m</option> option prevents the firewall script
+          from modifying the current routing configuration.</para>
+
+          <para>The <option>-f</option> option was added in Shorewall 4.6.5.
+          If the RESTOREFILE named in <ulink
+          url="shorewall.conf.html">shorewall.conf</ulink>(5) exists, is
+          executable and is not older than the current filewall script, then
+          that saved configuration is restored.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5
+          and is only meaningful when the <option>-f</option> option is also
+          specified. If the previously-saved configuration is restored, and if
+          the <option>-C</option> option was also specified in the <emphasis
+          role="bold">save</emphasis> command, then the packet and byte
+          counters will be restored.</para>
         </listitem>
       </varlistentry>
 
@@ -1073,6 +1180,10 @@
         <listitem>
           <para>Produces a short report about the state of the
           Shorewall-configured firewall.</para>
+
+          <para>The <option>-i </option>option was added in Shorewall 4.6.2
+          and causes the status of each optional or provider interface to be
+          displayed.</para>
         </listitem>
       </varlistentry>
 

Shorewall-lite/shorewall-lite.service

@@ -1,20 +1,20 @@
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.4
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
 #
-#     Copyright 2011 Jonathan Underwood (jonathan.underwood@gmail.com)
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
 Description=Shorewall IPv4 firewall (lite)
-After=syslog.target
 After=network.target
+Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-lite
 StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start
+ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
 ExecStop=/sbin/shorewall-lite $OPTIONS stop
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=basic.target

Shorewall-lite/shorewall-lite.service.214

@@ -0,0 +1,20 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#
+[Unit]
+Description=Shorewall IPv4 firewall (lite)
+After=network-online.target
+Conflicts=iptables.service firewalld.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/sysconfig/shorewall-lite
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
+ExecStop=/sbin/shorewall-lite $OPTIONS stop
+
+[Install]
+WantedBy=basic.target

Shorewall-lite/uninstall.sh

@@ -27,11 +27,16 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx  #The Build script inserts the actual version
+PRODUCT=shorewall-lite
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <shorewallrc file> ]"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
     exit $1
 }
 
@@ -69,6 +74,42 @@ remove_file() # $1 = file to restore
     fi
 }
 
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
 #
 # Read the RC file
 #
@@ -112,8 +153,12 @@ fi
 
 echo "Uninstalling Shorewall Lite $VERSION"
 
-if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
-   shorewall-lite clear
+[ -n "$SANDBOX" ] && configure=0
+
+if [ $configure -eq 1 ]; then
+    if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
+	shorewall-lite clear
+    fi
 fi
 
 if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
@@ -123,28 +168,34 @@ elif [ -n "$INITFILE" ]; then
 fi
 
 if [ -f "$FIREWALL" ]; then
-    if mywhich updaterc.d ; then
-	updaterc.d shorewall-lite remove
-    elif mywhich insserv ; then
-        insserv -r $FIREWALL
-    elif [ mywhich chkconfig ; then
-	chkconfig --del $(basename $FIREWALL)
-    elif mywhich systemctl ; then
-	systemctl disable shorewall-lite
+    if [ $configure -eq 1 ]; then
+	if mywhich updaterc.d ; then
+	    updaterc.d shorewall-lite remove
+	elif mywhich insserv ; then
+            insserv -r $FIREWALL
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $FIREWALL)
+	fi
     fi
 
     remove_file $FIREWALL
 fi
 
+if [ -n "$SYSTEMD" ]; then
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
+    rm -f $SYSTEMD/shorewall-lite.service
+fi
+
 rm -f ${SBINDIR}/shorewall-lite
 
-rm -rf ${SBINDIR}/shorewall-lite
+rm -rf ${CONFDIR}/shorewall-lite
 rm -rf ${VARDIR}/shorewall-lite
 rm -rf ${SHAREDIR}/shorewall-lite
-rm -rf ${LIBEXEC}/shorewall-lite
+rm -rf ${LIBEXECDIR}/shorewall-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
-[ -n "$SYSTEMD" ] && rm -f  ${SYSTEMD}/shorewall-lite.service
+
+rm -f ${MANDIR}/man5/shorewall-lite*
+rm -f ${MANDIR}/man8/shorewall-lite*
 
 echo "Shorewall Lite Uninstalled"
 
-

Shorewall/Macros/macro.Amanda

@@ -14,7 +14,7 @@
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __AMANDA_HELPER )
- PARAM	-	-	udp	10080 ; helper=amanda
+ PARAM	-	-	udp	10080 { helper=amanda }
 ?else
  PARAM	-	-	udp	10080
 ?endif

Shorewall/Macros/macro.FTP

@@ -11,7 +11,7 @@
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __FTP_HELPER  )
- PARAM	-	-	tcp	21 ; helper=ftp
+ PARAM	-	-	tcp	21 { helper=ftp }
 ?else
  PARAM	-	-	tcp	21
 ?endif

Shorewall/Macros/macro.Goto-Meeting

@@ -0,0 +1,12 @@
+#
+# Shorewall version 4 - Citrix/Goto Meeting macro
+#
+# /usr/share/shorewall/macro.Goto-Meeting
+#          by Eric Teeter
+#       This macro handles Citrix/Goto Meeting
+#       Assumes that ports 80 and 443 are already open
+#       If needed, use the macros that open Http and Https to reduce redundancy
+####################################################################################
+#ACTION	   SOURCE	DEST    PROTO   DEST    SOURCE  RATE    USER/
+#                                       PORT(S) PORT(S) LIMIT   GROUP
+PARAM      -         	-       tcp     8200    # Goto Meeting only needed (TCP outbound)

Shorewall/Macros/macro.ILO

@@ -0,0 +1,23 @@
+#
+# Shorewall version 4 - ILO Macro
+#
+# /usr/share/shorewall/macro.ILO
+#
+#	This macro handles console redirection with HP ILO 2+,
+#	Use this macro to open access to your ILO interface from management
+#	workstations.
+#
+###############################################################################
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	3002		# Raw serial data
+PARAM	-	-	tcp	9300		# Shared Remote Console
+PARAM	-	-	tcp	17988		# Virtual Media
+PARAM	-	-	tcp	17990		# Console Replay
+HTTP
+HTTPS
+RDP
+SSH
+Telnet						# Remote Console/Telnet

Shorewall/Macros/macro.IPMI

@@ -3,7 +3,10 @@
 #
 # /usr/share/shorewall/macro.IPMI
 #
-#	This macro handles IPMI console redirection with Dell and Supermicro.
+#	This macro handles IPMI console redirection with Asus (AMI),
+#	Dell DRAC5+ (Avocent), and Supermicro (Aten or AMI).
+#	Use this macro to open access to your IPMI interface from management
+#	workstations.
 #
 ###############################################################################
 ?FORMAT 2
@@ -11,7 +14,13 @@
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	623		# RMCP
-PARAM	-	-	tcp	5900,5901	# Remote Console
+PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
+PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)
+PARAM	-	-	tcp	5900,5901	# Remote Console (Aten, Dell)
+PARAM	-	-	tcp	7578		# Remote Console (AMI)
 PARAM	-	-	udp	623		# RMCP
 HTTP
 HTTPS
+SNMP
+SSH						# Serial over Lan
+Telnet

Shorewall/Macros/macro.IRC

@@ -12,7 +12,7 @@
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __IRC_HELPER  )
- PARAM	-	-	tcp	6667 ; helper=irc
+ PARAM	-	-	tcp	6667 { helper=irc }
 ?else
  PARAM	-	-	tcp	6667
 ?endif

Shorewall/Macros/macro.PPtP

@@ -14,7 +14,7 @@ PARAM	-	-	47
 PARAM	DEST	SOURCE	47
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __PPTP_HELPER )
- PARAM	-	-	tcp	1723 ; helper=pptp
+ PARAM	-	-	tcp	1723 { helper=pptp }
 ?else
  PARAM	-	-	tcp	1723
 ?endif

Shorewall/Macros/macro.SANE

@@ -12,7 +12,7 @@
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __SANE_HELPER )
- PARAM	-	-	tcp	6566 ; helper=sane
+ PARAM	-	-	tcp	6566 { helper=sane }
 ?else
  PARAM	-	-	tcp	6566
 ?endif

Shorewall/Macros/macro.SIP

@@ -12,7 +12,7 @@
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __SIP_HELPER  )
- PARAM	-	-	udp	5060 ; helper=sip
+ PARAM	-	-	udp	5060 { helper=sip }
 ?else
  PARAM	-	-	udp	5060
 ?endif

Shorewall/Macros/macro.SMB

@@ -17,7 +17,7 @@
 PARAM	-	-	udp	135,445
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __NETBIOS_NS_HELPER )
- PARAM	-	-	udp	137 ; helper=netbios-ns
+ PARAM	-	-	udp	137 { helper=netbios-ns }
  PARAM	-	-	udp	138:139
 ?else
  PARAM	-	-	udp	137:139

Shorewall/Macros/macro.SMBBI

@@ -17,7 +17,7 @@
 PARAM	-	-	udp	135,445
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __NETBIOS_NS_HELPER )
- PARAM	-	-	udp	137 ; helper=netbios-ns
+ PARAM	-	-	udp	137 { helper=netbios-ns }
  PARAM	-	-	udp	138:139
 ?else
  PARAM	-	-	udp	137:139
@@ -28,7 +28,7 @@ PARAM	-	-	tcp	135,139,445
 PARAM	DEST	SOURCE	udp	135,445
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __NETBIOS_NS_HELPER )
- PARAM	DEST	SOURCE	udp	137 ; helper=netbios-ns
+ PARAM	DEST	SOURCE	udp	137 { helper=netbios-ns }
  PARAM	DEST	SOURCE	udp	138:139
 ?else
  PARAM	DEST	SOURCE	udp	137:139

Shorewall/Macros/macro.SNMP

@@ -14,7 +14,7 @@
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __SNMP_HELPER )
- PARAM	-	-  	udp     161 ; helper=snmp
+ PARAM	-	-  	udp     161 { helper=snmp }
 ?else
  PARAM	-	-	udp	161
 ?endif

Shorewall/Macros/macro.TFTP

@@ -14,7 +14,7 @@
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __TFTP_HELPER )
- PARAM	-	-	udp	69 ; helper=tftp
+ PARAM	-	-	udp	69 { helper=tftp }
 ?else
  PARAM	-	-	udp	69
 ?endif

Shorewall/Perl/Shorewall/Accounting.pm

@@ -155,8 +155,6 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 
     my ($action, $chain, $source, $dest, $proto, $ports, $sports, $user, $mark, $ipsec, $headers ) = @_;
 
-    $acctable = $config{ACCOUNTING_TABLE};
-
     $jumpchainref = 0;
 
     $asection = LEGACY if $asection < 0;
@@ -453,6 +451,8 @@ sub setup_accounting() {
 
 	set_section_function( &process_section );
 
+	$acctable = $config{ACCOUNTING_TABLE};
+
 	first_entry "$doing $fn...";
 
 	my $nonEmpty = 0;

Shorewall/Perl/Shorewall/Chains.pm

@@ -73,6 +73,7 @@ our @EXPORT = ( qw(
 		    allow_optimize
 		    allow_delete
 		    allow_move
+                    make_terminating
 		    set_optflags
 		    reset_optflags
 		    has_return
@@ -104,7 +105,6 @@ our @EXPORT = ( qw(
 		    AUDIT
 		    HELPER
 		    INLINE
-		    TERMINATING
 		    STATEMATCH
 		    USERBUILTIN
 		    INLINERULE
@@ -262,6 +262,7 @@ our %EXPORT_TAGS = (
 				       set_global_variables
 				       save_dynamic_chains
 				       load_ipsets
+				       create_save_ipsets
 				       validate_nfobject
 				       create_nfobjects
 				       create_netfilter_load
@@ -793,6 +794,13 @@ sub decr_cmd_level( $ ) {
     assert( --$_[0]->{cmdlevel} >= 0, $_[0] );
 }
 
+#
+# Mark an action as terminating
+#
+sub make_terminating( $ ) {
+    $terminating{$_[0]} = 1;
+}
+
 #
 # Transform the passed iptables rule into an internal-form hash reference.
 # Most of the compiler has been converted to use the new form natively.
@@ -1654,7 +1662,8 @@ sub insert_rule($$$) {
 sub insert_irule( $$$$;@ ) {
     my ( $chainref, $jump, $target, $number, @matches ) = @_;
 
-    my $ruleref = {};
+    my $rulesref = $chainref->{rules};
+    my $ruleref  = {};
 
     $ruleref->{mode} = ( $ruleref->{cmdlevel} = $chainref->{cmdlevel} ) ? CMD_MODE : CAT_MODE;
 
@@ -1673,7 +1682,15 @@ sub insert_irule( $$$$;@ ) {
     
     $ruleref->{comment} = shortlineinfo( $chainref->{origin} ) || $ruleref->{comment} || $comment;
 
-    splice( @{$chainref->{rules}}, $number, 0, $ruleref );
+    if ( $number >= @$rulesref ) {
+	#
+	# Avoid failure in spice if we insert beyond the end of the chain
+	#
+	$number = @$rulesref;
+	push @$rulesref, $ruleref;
+    } else {
+	splice( @$rulesref, $number, 0, $ruleref );
+    }
 
     trace( $chainref, 'I', ++$number, format_rule( $chainref, $ruleref ) ) if $debug;
 
@@ -3503,7 +3520,7 @@ sub optimize_level8( $$$ ) {
     %renamed = ();
 
     while ( $progress ) {
-	my @chains   = ( sort level8_compare grep $_->{referenced} && ! $_->{builtin}, values %{$tableref} );
+	my @chains   = ( sort { level8_compare($a, $b) } ( grep $_->{referenced} && ! $_->{builtin}, values %{$tableref} ) );
 	my @chains1  = @chains;
 	my $chains   = @chains;
 	my %rename;
@@ -4859,62 +4876,79 @@ my %norate = ( DROP => 1, REJECT => 1 );
 # Create a "-m limit" match for the passed LIMIT/BURST
 #
 sub do_ratelimit( $$ ) {
-    my ( $rate, $action ) = @_;
+    my ( $rates, $action ) = @_;
 
-    return '' unless $rate and $rate ne '-';
+    return '' unless $rates and $rates ne '-';
 
     fatal_error "Rate Limiting not available with $action" if $norate{$action};
-    #
-    # "-m hashlimit" match for the passed LIMIT/BURST
-    #
-    if ( $rate =~ /^[sd]:{1,2}/ ) {
-	require_capability 'HASHLIMIT_MATCH', 'Per-ip rate limiting' , 's';
 
-	my $limit = "-m hashlimit ";
-	my $match = have_capability( 'OLD_HL_MATCH' ) ? 'hashlimit' : 'hashlimit-upto';
-	my $units;
+    my @rates = split_list $rates, 'rate';
 
-	if ( $rate =~ /^[sd]:((\w*):)?((\d+)(\/(sec|min|hour|day))?):(\d+)$/ ) {
-	    fatal_error "Invalid Rate ($3)" unless $4;
-	    fatal_error "Invalid Burst ($7)" unless $7;
-	    $limit .= "--$match $3 --hashlimit-burst $7 --hashlimit-name ";
-	    $limit .= $2 ? $2 : 'shorewall' . $hashlimitset++;
-	    $limit .= ' --hashlimit-mode ';
-	    $units = $6;
-	} elsif ( $rate =~ /^[sd]:((\w*):)?((\d+)(\/(sec|min|hour|day))?)$/ ) {
-	    fatal_error "Invalid Rate ($3)" unless $4;
-	    $limit .= "--$match $3 --hashlimit-name ";
-	    $limit .= $2 ? $2 :  'shorewall' . $hashlimitset++;
-	    $limit .= ' --hashlimit-mode ';
-	    $units = $6;
-	} else {
-	    fatal_error "Invalid rate ($rate)";
-	}
+    if ( @rates == 2 ) {
+	$rates[0] = 's:' . $rates[0];
+	$rates[1] = 'd:' . $rates[1];
+    } elsif ( @rates > 2 ) {
+	fatal error "Only two rates may be specified";
+    }
 
-	$limit .= $rate =~ /^s:/ ? 'srcip ' : 'dstip ';
+    my $limit = '';
 
-	if ( $units && $units ne 'sec' ) {
-	    my $expire = 60000; # 1 minute in milliseconds
+    for my $rate ( @rates ) {
+	#
+	# "-m hashlimit" match for the passed LIMIT/BURST
+	#
+	if ( $rate =~ /^([sd]):{1,2}/ ) {
+	    require_capability 'HASHLIMIT_MATCH', 'Per-ip rate limiting' , 's';
 
-	    if ( $units ne 'min' ) {
-		$expire *= 60; #At least an hour
-		$expire *= 24 if $units eq 'day';
+	    my $match = have_capability( 'OLD_HL_MATCH' ) ? 'hashlimit' : 'hashlimit-upto';
+	    my $units;
+
+	    $limit .= "-m hashlimit ";
+	    
+	    if ( $rate =~ /^[sd]:((\w*):)?((\d+)(\/(sec|min|hour|day))?):(\d+)$/ ) {
+		fatal_error "Invalid Rate ($3)" unless $4;
+		fatal_error "Invalid Burst ($7)" unless $7;
+		$limit .= "--$match $3 --hashlimit-burst $7 --hashlimit-name ";
+		$limit .= $2 ? $2 : 'shorewall' . $hashlimitset++;
+		$limit .= ' --hashlimit-mode ';
+		$units = $6;
+	    } elsif ( $rate =~ /^[sd]:((\w*):)?((\d+)(\/(sec|min|hour|day))?)$/ ) {
+		fatal_error "Invalid Rate ($3)" unless $4;
+		$limit .= "--$match $3 --hashlimit-name ";
+		$limit .= $2 ? $2 :  'shorewall' . $hashlimitset++;
+		$limit .= ' --hashlimit-mode ';
+		$units = $6;
+	    } else {
+		fatal_error "Invalid rate ($rate)";
 	    }
 
-	    $limit .= "--hashlimit-htable-expire $expire ";
-	}
+	    $limit .= $rate =~ /^s:/ ? 'srcip ' : 'dstip ';
 
-	$limit;
-    } elsif ( $rate =~ /^((\d+)(\/(sec|min|hour|day))?):(\d+)$/ ) {
-	fatal_error "Invalid Rate ($1)" unless $2;
-	fatal_error "Invalid Burst ($5)" unless $5;
-	"-m limit --limit $1 --limit-burst $5 ";
-    } elsif ( $rate =~ /^(\d+)(\/(sec|min|hour|day))?$/ )  {
-	fatal_error "Invalid Rate (${1}${2})" unless $1;
-	"-m limit --limit $rate ";
-    } else {
-	fatal_error "Invalid rate ($rate)";
+	    if ( $units && $units ne 'sec' ) {
+		my $expire = 60000; # 1 minute in milliseconds
+
+		if ( $units ne 'min' ) {
+		    $expire *= 60; #At least an hour
+		    $expire *= 24 if $units eq 'day';
+		}
+
+		$limit .= "--hashlimit-htable-expire $expire ";
+	    }
+	} else {
+	    if ( $rate =~ /^((\d+)(\/(sec|min|hour|day))?):(\d+)$/ ) {
+		fatal_error "Invalid Rate ($1)" unless $2;
+		fatal_error "Invalid Burst ($5)" unless $5;
+		$limit = "-m limit --limit $1 --limit-burst $5 ";
+	    } elsif ( $rate =~ /^(\d+)(\/(sec|min|hour|day))?$/ )  {
+		fatal_error "Invalid Rate (${1}${2})" unless $1;
+		$limit = "-m limit --limit $rate ";
+	    } else {
+		fatal_error "Invalid rate ($rate)";
+	    }
+	}
     }
+
+    $limit;
 }
 
 #
@@ -6487,7 +6521,6 @@ sub set_chain_variables() {
 
 	emit( 'IPTABLES_RESTORE=${IPTABLES}-restore',
 	      '[ -x "$IPTABLES_RESTORE" ] || startup_error "$IPTABLES_RESTORE does not exist or is not executable"' );
-
 	emit( 'g_tool=$IPTABLES' );
     } else {
 	if ( $config{IP6TABLES} ) {
@@ -6502,7 +6535,6 @@ sub set_chain_variables() {
 
 	emit( 'IP6TABLES_RESTORE=${IP6TABLES}-restore',
 	      '[ -x "$IP6TABLES_RESTORE" ] || startup_error "$IP6TABLES_RESTORE does not exist or is not executable"' );
-
 	emit( 'g_tool=$IP6TABLES' );
     }
 
@@ -6723,20 +6755,25 @@ sub interface_mac( $$ ) {
 #
 # Record the fact that the ruleset requires MAC address of the passed gateway IP routed out of the passed interface for the passed provider number
 #
-sub get_interface_mac( $$$ ) {
-    my ( $ipaddr, $logical , $table ) = @_;
+sub get_interface_mac( $$$$ ) {
+    my ( $ipaddr, $logical , $table, $mac ) = @_;
 
     my $interface = get_physical( $logical );
     my $variable = interface_mac( $interface , $table );
 
     $global_variables |= NOT_RESTORE;
-
-    if ( interface_is_optional $logical ) {
-	$interfacemacs{$table} = qq($variable=\$(find_mac $ipaddr $interface)\n);
+    
+    if ( $mac ) {
+	$interfacemacs{$table} = qq($variable=$mac);
     } else {
-	$interfacemacs{$table} = qq($variable=\$(find_mac $ipaddr $interface)
+	if ( interface_is_optional $logical ) {
+	    $interfacemacs{$table} = qq($variable=\$(find_mac $ipaddr $interface)\n);
+	} else {
+	    $interfacemacs{$table} = qq($variable=\$(find_mac $ipaddr $interface)
 [ -n "\$$variable" ] || startup_error "Unable to determine the MAC address of $ipaddr through interface \\"$interface\\""
 );
+
+       }
     }
 
     "\$$variable";
@@ -7565,7 +7602,7 @@ sub expand_rule( $$$$$$$$$$$;$ )
 						     $exceptionrule,
 						     $actparms{disposition} || $disposition,
 						     $target ),
-					   $terminating{$basictarget} || ( $targetref || $targetref->{complete} ),
+					   $terminating{$basictarget} || ( $targetref && $targetref->{complete} ),
 					   $matches );
 		    }
 
@@ -7870,14 +7907,18 @@ sub emitr1( $$ ) {
 
 sub save_dynamic_chains() {
 
-    my $tool;
+    my $tool    = $family == F_IPV4 ? '${IPTABLES}'      : '${IP6TABLES}';
+    my $utility = $family == F_IPV4 ? 'iptables-restore' : 'ip6tables-restore';
 
     emit ( 'if [ "$COMMAND" = restart -o "$COMMAND" = refresh ]; then' );
     push_indent;
 
-    if ( have_capability 'IPTABLES_S' ) {
-	$tool = $family == F_IPV4 ? '${IPTABLES}' : '${IP6TABLES}';
+    emit( 'if [ -n "$g_counters" ]; then' ,
+	  "    ${tool}-save --counters | grep -vE '[ :]shorewall ' > \${VARDIR}/.${utility}-input",
+	  "fi\n"
+	);
 
+    if ( have_capability 'IPTABLES_S' ) {
 	emit <<"EOF";
 if chain_exists 'UPnP -t nat'; then
     $tool -t nat -S UPnP | tail -n +2 > \${VARDIR}/.UPnP
@@ -7897,6 +7938,7 @@ else
     rm -f \${VARDIR}/.dynamic
 fi
 EOF
+
     } else {
 	$tool = $family == F_IPV4 ? '${IPTABLES}-save' : '${IP6TABLES}-save';
 
@@ -7974,11 +8016,99 @@ sub ensure_ipset( $ ) {
     }
 }
 
+#
+# Generate the save_ipsets() function
+#
+sub create_save_ipsets() {
+    my @ipsets = all_ipsets;
+
+    emit( "#\n#Save the ipsets specified by the SAVE_IPSETS setting and by dynamic zones\n#",
+	  'save_ipsets() {' );
+
+    if ( @ipsets || @{$globals{SAVED_IPSETS}} || ( $config{SAVE_IPSETS} && have_ipset_rules ) ) {
+	emit( '    local file' ,
+	      '',
+	      '    file=$1'
+	    );
+
+	if ( @ipsets ) {
+	    emit '';
+	    ensure_ipset( $_ ) for @ipsets;
+	}
+
+	if ( $config{SAVE_IPSETS} ) {
+	    if ( $family == F_IPV6 || $config{SAVE_IPSETS} eq 'ipv4' ) {
+		my $select = $family == F_IPV4 ? '^create.*family inet ' : 'create.*family inet6 ';
+
+		emit( '' ,
+		      '    rm -f $file' ,
+		      '    touch $file' ,
+		      '    local set' ,
+		    );
+
+		if ( @ipsets ) {
+		    emit '';
+		    emit( "    \$IPSET -S $_ >> \$file" ) for @ipsets;
+		}
+
+		emit( '',
+		      "    for set in \$(\$IPSET save | grep '$select' | cut -d' ' -f2); do" ,
+		      "        \$IPSET save \$set >> \$file" ,
+		      "    done" );
+	    } else {
+		emit ( '' ,
+		       '    if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then' ,
+		       '        #',
+		       '        # The \'grep -v\' is a hack for a bug in ipset\'s nethash implementation when xtables-addons is applied to Lenny' ,
+		       '        #',
+		       '        hack=\'| grep -v /31\'' ,
+		       '    else' ,
+		       '        hack=' ,
+		       '    fi' ,
+		       '',
+		       '    if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then' ,
+		       "        grep -qE -- \"^(-N|create )\" \${VARDIR}/ipsets.tmp && mv -f \${VARDIR}/ipsets.tmp \$file" ,
+		       '    fi' );
+ 	    }
+
+	    emit("}\n" );
+	} elsif ( @ipsets || $globals{SAVED_IPSETS} ) {
+	    emit( '' ,
+		  '    rm -f ${VARDIR}/ipsets.tmp' ,
+		  '    touch ${VARDIR}/ipsets.tmp' ,
+		);
+
+	    if ( @ipsets ) {
+		emit '';
+		emit( "    \$IPSET -S $_ >> \${VARDIR}/ipsets.tmp" ) for @ipsets;
+	    }
+
+	    emit( '' ,
+		  "    if qt \$IPSET list $_; then" ,
+		  "        \$IPSET save $_ >> \${VARDIR}/ipsets.tmp" ,
+		  '    else' ,
+		  "        error_message 'ipset $_ not saved (not found)'" ,
+		  "    fi\n" ) for @{$globals{SAVED_IPSETS}};
+
+	    emit( '' ,
+		  "    grep -qE -- \"(-N|^create )\" \${VARDIR}/ipsets.tmp && cat \${VARDIR}/ipsets.tmp >> \$file\n" ,
+		  '' ,
+		  "}\n" );
+	}
+    } elsif ( $config{SAVE_IPSETS} ) {
+	emit( '    error_message "WARNING: No ipsets were saved"',
+	      "}\n" );
+    } else {
+	emit( '    true',
+	      "}\n" );
+    }
+}
+
 sub load_ipsets() {
 
     my @ipsets = all_ipsets;
 
-    if ( @ipsets || ( $config{SAVE_IPSETS} && have_ipset_rules ) ) {
+    if ( @ipsets || @{$globals{SAVED_IPSETS}} || ( $config{SAVE_IPSETS} && have_ipset_rules ) ) {
 	emit ( '',
 	       'local hack',
 	       '',
@@ -8005,9 +8135,25 @@ sub load_ipsets() {
 		emit ( '' );
 		ensure_ipset( $_ ) for @ipsets;
 		emit ( '' );
+
+		emit ( '    if [ -f ${VARDIR}/ipsets.save ]; then' ,
+		       '        $IPSET flush' ,
+		       '        $IPSET destroy' ,
+		       '        $IPSET restore < ${VARDIR}/ipsets.save' ,
+		       "    fi\n" ) for @{$globals{SAVED_IPSETS}};
 	    }
 	} else {
 	    ensure_ipset( $_ ) for @ipsets;
+
+	    if ( @{$globals{SAVED_IPSETS}} ) {
+		emit ( '' );
+
+		emit ( '    if [ -f ${VARDIR}/ipsets.save ]; then' ,
+		       '        $IPSET flush' ,
+		       '        $IPSET destroy' ,
+		       '        $IPSET restore < ${VARDIR}/ipsets.save' ,
+		       "    fi\n" ) for @{$globals{SAVED_IPSETS}};
+	    }
 	}
 
 	emit ( 'elif [ "$COMMAND" = restore -a -z "$g_recovering" ]; then' );
@@ -8031,6 +8177,12 @@ sub load_ipsets() {
 	    }
 	} else {
 	    ensure_ipset( $_ ) for @ipsets;
+
+	    emit ( '    if [ -f ${VARDIR}/ipsets.save ]; then' ,
+		   '        $IPSET flush' ,
+		   '        $IPSET destroy' ,
+		   '        $IPSET restore < ${VARDIR}/ipsets.save' ,
+		   "    fi\n" ) for @{$globals{SAVED_IPSETS}};
 	}
 
 	if ( @ipsets ) {
@@ -8038,36 +8190,14 @@ sub load_ipsets() {
 	    ensure_ipset( $_ ) for @ipsets;
 	}
 
-	emit( 'elif [ "$COMMAND" = stop ]; then' );
-
-	if ( @ipsets ) {
-	    ensure_ipset( $_ ) for @ipsets;
-	    emit( '' );
-	}
-
-	if ( $family == F_IPV4 ) {
-	    emit ( '    if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then' ,
-		   '        #',
-		   '        # The \'grep -v\' is a hack for a bug in ipset\'s nethash implementation when xtables-addons is applied to Lenny' ,
-		   '        #',
-		   '        hack=\'| grep -v /31\'' ,
-		   '    else' ,
-		   '        hack=' ,
-		   '    fi' ,
-		   '',
-		   '    if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then' ,
-		   '        grep -qE -- "^(-N|create )" ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${VARDIR}/ipsets.save' ,
-		   '    fi' );
-	} else {
-	    emit ( '    if eval $IPSET -S > ${VARDIR}/ipsets.tmp; then' ,
-		   '        grep -qE -- "^(-N|create )" ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${VARDIR}/ipsets.save' ,
-		   '    fi' );
-	}
+	emit( 'elif [ "$COMMAND" = stop ]; then' ,
+	      '   save_ipsets'
+	    );
 
 	if ( @ipsets ) {
 	    emit( 'elif [ "$COMMAND" = refresh ]; then' );
 	    ensure_ipset( $_ ) for @ipsets;
-	}
+	};
 
 	emit ( 'fi' ,
 	       '' );
@@ -8113,17 +8243,29 @@ sub create_netfilter_load( $ ) {
 	   '# Create the input to iptables-restore/ip6tables-restore and pass that input to the utility',
 	   '#',
 	   'setup_netfilter()',
-	   '{'
-	   );
+	   '{',
+	   '    local option',
+	);
 
     push_indent;
 
     my $utility = $family == F_IPV4 ? 'iptables-restore' : 'ip6tables-restore';
     my $UTILITY = $family == F_IPV4 ? 'IPTABLES_RESTORE' : 'IP6TABLES_RESTORE';
 
-    save_progress_message "Preparing $utility input...";
+    emit( '',
+	  'if [ "$COMMAND" = restart -a -n "$g_counters" ] && chain_exists $g_sha1sum1 && chain_exists $g_sha1sum2 ; then',
+	  '    option="--counters"',
+	  '',
+	  '    progress_message "Reusing existing ruleset..."',
+	  '',
+	  'else'
+	);
 
-    emit '';
+    push_indent;
+
+    emit 'option=';
+
+    save_progress_message "Preparing $utility input...";
 
     emit "exec 3>\${VARDIR}/.${utility}-input";
 
@@ -8163,6 +8305,14 @@ sub create_netfilter_load( $ ) {
 		push @chains, $chainref;
 	    }
 	}
+	#
+	# SHA1SUM chains for handling 'restart -s'
+	#
+	if ( $table eq 'filter' ) {
+	    emit_unindented ':$g_sha1sum1 - [0:0]';
+	    emit_unindented ':$g_sha1sum2 - [0:0]';
+	}
+
 	#
 	# Then emit the rules
 	#
@@ -8177,20 +8327,24 @@ sub create_netfilter_load( $ ) {
     }
 
     enter_cmd_mode;
+
+    pop_indent, emit "fi\n";
     #
     # Now generate the actual ip[6]tables-restore command
     #
     emit(  'exec 3>&-',
-	   '',
-	   '[ -n "$g_debug_iptables" ] && command=debug_restore_input || command=$' . $UTILITY,
-	   '',
-	   'progress_message2 "Running $command..."',
-	   '',
-	   "cat \${VARDIR}/.${utility}-input | \$command # Use this nonsensical form to appease SELinux",
-	   'if [ $? != 0 ]; then',
-	   qq(    fatal_error "iptables-restore Failed. Input is in \${VARDIR}/.${utility}-input"),
-	   "fi\n"
-	   );
+	   '' );
+
+    emit( '[ -n "$g_debug_iptables" ] && command=debug_restore_input || command="$' . $UTILITY . ' $option"' );
+
+    emit( '',
+	  'progress_message2 "Running $command..."',
+	  '',
+	  "cat \${VARDIR}/.${utility}-input | \$command # Use this nonsensical form to appease SELinux",
+	  'if [ $? != 0 ]; then',
+	  qq(    fatal_error "iptables-restore Failed. Input is in \${VARDIR}/.${utility}-input"),
+	  "fi\n"
+	);
 
     pop_indent;
 

Shorewall/Perl/Shorewall/Compiler.pm

@@ -280,42 +280,43 @@ sub generate_script_2() {
 
     if ( $global_variables ) {
 
-	emit( 'case $COMMAND in' );
-
-	push_indent;
-
 	if ( $global_variables & NOT_RESTORE ) {
-	    emit( 'start|restart|refresh|disable|enable)' );
-	} else {
-	    emit( 'start|restart|refresh|disable|enable|restore)' );
-	}
 
-	push_indent;
+	    emit( 'case $COMMAND in' );
 
-	set_global_variables(1);
-
-	handle_optional_interfaces(0);
-
-	emit ';;';
-
-	if ( $global_variables == ( ALL_COMMANDS | NOT_RESTORE ) ) {
-	    pop_indent;
+	    push_indent;
 
 	    emit 'restore)';
 
 	    push_indent;
 
-	    set_global_variables(0);
+	    if ( $global_variables == ( ALL_COMMANDS | NOT_RESTORE ) ) {
 
-	    handle_optional_interfaces(0);
+		set_global_variables(0);
+
+		handle_optional_interfaces(0);
+	    }
 
 	    emit ';;';
+
+	    pop_indent;
+
+	    emit '*)';
+
+	    push_indent;
 	}
 
-	pop_indent;
-	pop_indent;
+	set_global_variables(1);
 
-	emit ( 'esac' ) ,
+	if ( $global_variables & NOT_RESTORE ) {
+	    handle_optional_interfaces(0);
+	    emit ';;';
+	    pop_indent;
+	    pop_indent;
+	    emit ( 'esac' );
+	} else {
+	    handle_optional_interfaces(1);
+	}
     } else {
 	emit( 'true' ) unless handle_optional_interfaces(1);
     }
@@ -347,10 +348,12 @@ sub generate_script_3($) {
     create_netfilter_load( $test );
     create_arptables_load( $test ) if $have_arptables;
     create_chainlist_reload( $_[0] );
+    create_save_ipsets;
 
     emit "#\n# Start/Restart the Firewall\n#";
 
-    emit 'define_firewall() {';
+    emit( 'define_firewall() {',
+	  '    local options' );
 
     push_indent;
 
@@ -468,10 +471,12 @@ sub generate_script_3($) {
     emit( '',
 	  'if [ $COMMAND = restore ]; then',
 	  '    iptables_save_file=${VARDIR}/$(basename $0)-iptables',
-	  '    if [ -f $iptables_save_file ]; then' );
+	  '    if [ -f $iptables_save_file ]; then',
+	  '        [ -n "$g_counters" ] && options=--counters'
+	);
 
     if ( $family == F_IPV4 ) {
-	emit( '        cat $iptables_save_file | $IPTABLES_RESTORE # Use this nonsensical form to appease SELinux' );
+	emit( '        cat $iptables_save_file | $IPTABLES_RESTORE $options # Use this nonsensical form to appease SELinux' );
 
 	emit( '',
 	      '        arptables_save_file=${VARDIR}/$(basename $0)-arptables',
@@ -481,7 +486,7 @@ sub generate_script_3($) {
 	    if $config{SAVE_ARPTABLES};
 
     } else {
-	emit '        cat $iptables_save_file | $IP6TABLES_RESTORE # Use this nonsensical form to appease SELinux'
+	emit '        cat $iptables_save_file | $IP6TABLES_RESTORE $options # Use this nonsensical form to appease SELinux'
     }
 
     emit( '    else',
@@ -510,45 +515,41 @@ EOF
     #
     # Use a parameter list rather than 'here documents' to avoid an extra blank line
     #
-    emit(
-'    run_refreshed_exit',
-'    do_iptables -N shorewall' );
+    emit( '    run_refreshed_exit',
+	  '    do_iptables -N shorewall' );
 
     emit ( '    do_iptables -A shorewall -m recent --set --name %CURRENTTIME' ) if have_capability 'RECENT_MATCH';
 
     emit(
-"    set_state Started $config_dir",
-'    [ $0 = ${VARDIR}/firewall ] || cp -f $(my_pathname) ${VARDIR}/firewall',
-'else',
-'    setup_netfilter'
+	"    set_state Started $config_dir",
+	'    [ $0 = ${VARDIR}/firewall ] || cp -f $(my_pathname) ${VARDIR}/firewall',
+        'else',
+	'    setup_netfilter'
 	);
+
     push_indent;
     emit 'setup_arptables' if $have_arptables;
     setup_load_distribution;
     pop_indent;
 
-    emit<<'EOF';
-    conditionally_flush_conntrack
-EOF
+    emit( "    conditionally_flush_conntrack\n" );
+
     push_indent;
     initialize_switches;
     setup_forwarding( $family , 0 );
     pop_indent;
 
-    emit<<"EOF";
-    run_start_exit
-    do_iptables -N shorewall
-EOF
+    emit( '    run_start_exit', 
+	  '    do_iptables -N shorewall',
+	  '' );
 
-    emit ( '    do_iptables -A shorewall -m recent --set --name %CURRENTTIME' ) if have_capability 'RECENT_MATCH';
+    emit( '    do_iptables -A shorewall -m recent --set --name %CURRENTTIME' ) if have_capability 'RECENT_MATCH';
 
-    emit<<"EOF";
-    set_state Started $config_dir
-    my_pathname=\$(my_pathname)
-    [ \$my_pathname = \${VARDIR}/firewall ] || cp -f \$my_pathname \${VARDIR}/firewall
-    run_started_exit
-fi
-EOF
+    emit( "    set_state Started $config_dir",
+	  '    my_pathname=$(my_pathname)',
+	  '    [ $my_pathname = ${VARDIR}/firewall ] || cp -f $my_pathname ${VARDIR}/firewall',
+	  '    run_started_exit',
+	  "fi\n" );
 
     emit<<'EOF';
 date > ${VARDIR}/restarted
@@ -741,6 +742,8 @@ sub compiler {
     }
 
     setup_source_routing($family);
+
+    setup_log_backend($family);
     #
     # Proxy Arp/Ndp
     #
@@ -974,8 +977,7 @@ sub compiler {
 	    # compile_stop_firewall() also validates the routestopped file. Since we don't
 	    # call that function during normal 'check', we must validate routestopped here.
 	    #
-	    process_routestopped;
-	    process_stoppedrules;
+	    process_routestopped unless process_stoppedrules;
 	}
 	#
 	# Report used/required capabilities

Shorewall/Perl/Shorewall/Config.pm

@@ -40,6 +40,7 @@ use Cwd qw(abs_path getcwd);
 use autouse 'Carp' => qw(longmess confess);
 use Scalar::Util 'reftype';
 use FindBin;
+use Digest::SHA qw(sha1_hex);
 
 our @ISA = qw(Exporter);
 #
@@ -88,6 +89,7 @@ our @EXPORT = qw(
 our @EXPORT_OK = qw( $shorewall_dir initialize shorewall);
 
 our %EXPORT_TAGS = ( internal => [ qw( create_temp_script
+                                       generate_sha1
 				       finalize_script
 				       enable_script
 				       disable_script
@@ -741,6 +743,7 @@ sub initialize( $;$$) {
 	  RPFILTER_LOG_LEVEL => undef,
 	  INVALID_LOG_LEVEL => undef,
 	  UNTRACKED_LOG_LEVEL => undef,
+	  LOG_BACKEND => undef,
 	  #
 	  # Location of Files
 	  #
@@ -1105,7 +1108,8 @@ sub initialize( $;$$) {
 			 $family == F_IPV4 ? 'shorewall' : 'shorewall6'
 		       ) if defined $shorewallrc;
 
-    $globals{SHAREDIRPL} = "$shorewallrc{SHAREDIR}/shorewall/";
+    $globals{SHAREDIRPL}   = "$shorewallrc{SHAREDIR}/shorewall/";
+    $globals{SAVED_IPSETS} = [];
 
     if ( $family == F_IPV4 ) {
 	$globals{SHAREDIR}      = "$shorewallrc{SHAREDIR}/shorewall";
@@ -1758,6 +1762,13 @@ sub create_temp_script( $$ ) {
 
 }
 
+# Generate the SHA1 digest of the (incomplete script)
+#
+sub generate_sha1() {
+    my $data = `cat $tempfile`;
+    sha1_hex $data;
+}
+
 #
 # Finalize the script file
 #
@@ -1767,6 +1778,19 @@ sub finalize_script( $ ) {
     $script = 0;
 
     if ( $file ne '-' ) {
+	my $sha1sum  = generate_sha1;
+	my $sha1sum1 = join( '-', 'sha-lh', substr( $sha1sum, 0, 20 ) );
+	my $sha1sum2 = join( '-', 'sha-rh', substr( $sha1sum, -20   ) );
+
+	@ARGV = ( $tempfile );
+	$^I = '';
+
+	while ( <> ) {
+	    s/g_sha1sum1=/g_sha1sum1=$sha1sum1/;
+	    s/g_sha1sum2=/g_sha1sum2=$sha1sum2/;
+	    print;
+	}
+
 	rename $tempfile, $file or fatal_error "Cannot Rename $tempfile to $file: $!";
 	chmod 0700, $file or fatal_error "Cannot secure $file for execute access";
 	progress_message3 "Shorewall configuration compiled to $file" unless $export;
@@ -3259,7 +3283,11 @@ sub expand_variables( \$ ) {
 	fatal_error "Variable Expansion Loop" if ++$count > 100;
     }
 
-    if ( $actparms{0} ) {
+    if ( $chain ) {
+	#
+	# We're in an action body -- allow escaping at signs (@) for u32
+	#
+	$$lineref =~ s/\\@/??/g;
 	#                         $1      $2   $3                     -     $4
 	while ( $$lineref =~ m( ^(.*?) \@({)? (\d+|[a-zA-Z_]\w*) (?(2)}) (.*)$ )x ) {
 	    my ( $first, $var, $rest ) = ( $1, $3, $4);
@@ -3268,6 +3296,8 @@ sub expand_variables( \$ ) {
 	    $$lineref = join( '', $first , $val , $rest );
 	    fatal_error "Variable Expansion Loop" if ++$count > 100;
 	}
+
+	$$lineref =~ s/\?\?/@/g;
     }
 }
 
@@ -3496,8 +3526,9 @@ sub default ( $$ ) {
 #
 # Provide a default value for a yes/no configuration variable.
 #
-sub default_yes_no ( $$ ) {
-    my ( $var, $val ) = @_;
+sub default_yes_no ( $$;$ ) {
+    my ( $var, $val, $other ) = @_;
+    my $result = 1;
 
     my $curval = $config{$var};
 
@@ -3506,12 +3537,31 @@ sub default_yes_no ( $$ ) {
 
 	if (  $curval eq 'no' ) {
 	    $config{$var} = '';
+	} elsif ( defined( $other ) ) {
+	    if ( $other eq '*' ) {
+		if ( $curval eq 'yes' ) {
+		    $config{$var} = 'Yes';
+		} else {
+		    $result = 0;
+		}
+	    } elsif ( $curval eq $other ) {
+		#
+		# Downshift value for later comparison
+		#
+		$config{$var} = $curval;
+	    }
 	} else {
 	    fatal_error "Invalid value for $var ($curval)" unless $curval eq 'yes';
+	    #
+	    # Make Case same as default
+	    #
+	    $config{$var} = 'Yes';
 	}
     } else {
 	$config{$var} = $val;
     }
+
+    $result;
 }
 
 sub default_yes_no_ipv4 ( $$ ) {
@@ -4118,7 +4168,7 @@ sub IPSet_Match() {
     if ( $ipset && -x $ipset ) {
 	qt( "$ipset -X $sillyname" );
 
-	if ( qt( "$ipset -N $sillyname iphash" ) || qt( "$ipset -N $sillyname hash:ip family $fam") ) {
+	if ( qt( "$ipset -N $sillyname hash:ip family $fam" ) || qt( "$ipset -N $sillyname iphash" ) ) {
 	    if ( qt1( "$iptables $iptablesw -A $sillyname -m set --match-set $sillyname src -j ACCEPT" ) ) {
 		$capabilities{IPSET_MATCH_NOMATCH}  = qt1( "$iptables $iptablesw -A $sillyname -m set --match-set $sillyname src --return-nomatch -j ACCEPT" );
 		$capabilities{IPSET_MATCH_COUNTERS} = qt1( "$iptables $iptablesw -A $sillyname -m set --match-set $sillyname src --packets-lt 100 -j ACCEPT" );
@@ -4140,7 +4190,7 @@ sub IPSet_Match_Nomatch() {
 }
 
 sub IPSet_Match_Counters() {
-    have_capability 'IPSET_MATCH' && $capabilities{IPSET_MATCH_COUNTGERS};
+    have_capability 'IPSET_MATCH' && $capabilities{IPSET_MATCH_COUNTERS};
 }
 
 sub IPSET_V5() {
@@ -4615,6 +4665,7 @@ sub determine_capabilities() {
 	$capabilities{FWMARK_RT_MASK}  = detect_capability( 'FWMARK_RT_MASK' );
 	$capabilities{MARK_ANYWHERE}   = detect_capability( 'MARK_ANYWHERE' );
 	$capabilities{ACCOUNT_TARGET}  = detect_capability( 'ACCOUNT_TARGET' );
+	$capabilities{HEADER_MATCH}    = detect_capability( 'HEADER_MATCH' );
 	$capabilities{AUDIT_TARGET}    = detect_capability( 'AUDIT_TARGET' );
 	$capabilities{IPSET_V5}        = detect_capability( 'IPSET_V5' );
 	$capabilities{CONDITION_MATCH} = detect_capability( 'CONDITION_MATCH' );
@@ -4630,6 +4681,7 @@ sub determine_capabilities() {
 	$capabilities{RPFILTER_MATCH}  = detect_capability( 'RPFILTER_MATCH' );
 	$capabilities{NFACCT_MATCH}    = detect_capability( 'NFACCT_MATCH' );
 	$capabilities{CHECKSUM_TARGET} = detect_capability( 'CHECKSUM_TARGET' );
+	$capabilities{ARPTABLESJF}     = detect_capability( 'ARPTABLESJF' );
 	$capabilities{MASQUERADE_TGT}  = detect_capability( 'MASQUERADE_TGT' );
 	$capabilities{UDPLITEREDIRECT} = detect_capability( 'UDPLITEREDIRECT' );
 	$capabilities{NEW_TOS_MATCH}   = detect_capability( 'NEW_TOS_MATCH' );
@@ -5026,15 +5078,23 @@ sub unsupported_yes_no_warning( $ ) {
 #
 # Process the params file
 #
-sub get_params() {
+sub get_params( $ ) {
+    my $export = $_[0];
+
     my $fn = find_file 'params';
 
     my %reserved = ( COMMAND => 1, CONFDIR => 1, SHAREDIR => 1, VARDIR => 1 );
 
     if ( -f $fn ) {
+	my $shellpath = $export ? '/bin/sh' : $config{SHOREWALL_SHELL} || '/bin/sh';
+
+	$shellpath = which( $shellpath ) unless $shellpath =~ '/';
+
+	fatal_error "SHOREWALL_SHELL ($shellpath) is not found or is not executable" unless -x $shellpath;
+
 	progress_message2 "Processing $fn ...";
 
-	my $command = "$FindBin::Bin/getparams $fn " . join( ':', @config_path ) . " $family";
+	my $command = "$shellpath $FindBin::Bin/getparams $fn " . join( ':', @config_path ) . " $family";
 	#
 	# getparams silently sources the params file under 'set -a', then executes 'export -p'
 	#
@@ -5304,7 +5364,7 @@ sub get_configuration( $$$$$ ) {
 
     ensure_config_path;
 
-    get_params;
+    get_params( $export );
 
     process_shorewall_conf( $update, $annotate, $directives );
 
@@ -5541,7 +5601,16 @@ sub get_configuration( $$$$$ ) {
     unsupported_yes_no         'BRIDGING';
     unsupported_yes_no_warning 'RFC1918_STRICT';
 
-    default_yes_no 'SAVE_IPSETS'                , '';
+    unless (default_yes_no 'SAVE_IPSETS', '', '*' ) {
+	$val = $config{SAVE_IPSETS};
+	unless ( $val eq 'ipv4' ) {
+	    my @sets = split_list( $val , 'ipset' );
+	    $globals{SAVED_IPSETS} = \@sets;
+	    require_capability 'IPSET_V5', 'A saved ipset list', 's';
+	    $config{SAVE_IPSETS} = '';
+	}
+    }
+
     default_yes_no 'SAVE_ARPTABLES'             , '';
     default_yes_no 'STARTUP_ENABLED'            , 'Yes';
     default_yes_no 'DELAYBLACKLISTLOAD'         , '';
@@ -5739,6 +5808,20 @@ sub get_configuration( $$$$$ ) {
     default_log_level 'INVALID_LOG_LEVEL',    '';
     default_log_level 'UNTRACKED_LOG_LEVEL',  '';
 
+    if ( supplied( $val = $config{LOG_BACKEND} ) ) {
+	if ( $family == F_IPV4 && $val eq 'ULOG' ) {
+	    $val = 'ipt_ULOG';
+	} elsif ( $val eq 'netlink' ) {
+	    $val = 'nfnetlink_log';
+	} elsif ( $val eq 'LOG' ) {
+	    $val = $family == F_IPV4 ? 'ipt_LOG' : 'ip6t_log';
+	} else {
+	    fatal_error "Invalid LOG Backend ($val)";
+	}
+
+	$config{LOG_BACKEND} = $val;
+    }
+
     warning_message "RFC1918_LOG_LEVEL=$config{RFC1918_LOG_LEVEL} ignored. The 'norfc1918' interface/host option is no longer supported" if $config{RFC1918_LOG_LEVEL};
 
     default_log_level 'SMURF_LOG_LEVEL',     '';

Shorewall/Perl/Shorewall/Misc.pm

@@ -690,11 +690,10 @@ sub process_stoppedrules() {
     my $result;
 
     if ( my $fn = open_file 'stoppedrules' , 1, 1 ) {
-	first_entry sub() {
-	    progress_message2("$doing $fn...");
+	first_entry sub () {
+	    progress_message2( "$doing $fn..." );
 	    unless ( $config{ADMINISABSENTMINDED} ) {
-		warning_message("Entries in the routestopped file are processed as if ADMINISABSENTMINDED=Yes");
-		$config{ADMINISABSENTMINDED} = 'Yes';
+		insert_ijump $filter_table ->{$_}, j => 'ACCEPT', 0, state_imatch 'ESTABLISHED,RELATED' for qw/INPUT FORWARD/;
 	    }
 	};
 
@@ -994,7 +993,7 @@ sub add_common_rules ( $$ ) {
 	for my $hostref  ( @$list ) {
 	    $interface     = $hostref->[0];
 	    my $ipsec      = $hostref->[1];
-	    my @policy     = have_ipsec ? ( policy => "--pol $ipsec --dir in" ) : ();
+	    my @policy     = $ipsec && have_ipsec ? ( policy => "--pol $ipsec --dir in" ) : ();
 	    my $target     = source_exclusion( $hostref->[3], $chainref );
 
 	    for $chain ( option_chains $interface ) {
@@ -1118,7 +1117,8 @@ sub add_common_rules ( $$ ) {
 	for my $hostref  ( @$list ) {
 	    my $interface  = $hostref->[0];
 	    my $target     = source_exclusion( $hostref->[3], $chainref );
-	    my @policy     = have_ipsec ? ( policy => "--pol $hostref->[1] --dir in" ) : ();
+	    my $ipsec      = $hostref->[1];
+	    my @policy     = $ipsec && have_ipsec ? ( policy => "--pol $ipsec --dir in" ) : ();
 
 	    for $chain ( option_chains $interface ) {
 		add_ijump( $filter_table->{$chain} , j => $target, p => 'tcp', imatch_source_net( $hostref->[2] ), @policy );
@@ -1289,7 +1289,7 @@ sub setup_mac_lists( $ ) {
 	for my $hostref ( @$maclist_hosts ) {
 	    my $interface  = $hostref->[0];
 	    my $ipsec      = $hostref->[1];
-	    my @policy     = have_ipsec ? ( policy => "--pol $ipsec --dir in" ) : ();
+	    my @policy     = $ipsec && have_ipsec ? ( policy => "--pol $ipsec --dir in" ) : ();
 	    my @source     = imatch_source_net $hostref->[2];
 
 	    my @state = have_capability( 'RAW_TABLE' ) ? state_imatch 'NEW,UNTRACKED' : state_imatch 'NEW';
@@ -2606,42 +2606,11 @@ EOF
 
     my @ipsets = all_ipsets;
 
-    if ( @ipsets || ( $config{SAVE_IPSETS} && have_ipset_rules ) ) {
-	emit <<'EOF';
-
-    case $IPSET in
-        */*)
-            if [ ! -x "$IPSET" ]; then
-                error_message "ERROR: IPSET=$IPSET does not exist or is not executable - ipsets are not saved"
-                IPSET=
-            fi
-	    ;;
-	*)
-	    IPSET="$(mywhich $IPSET)"
-	    [ -n "$IPSET" ] || error_message "ERROR: The ipset utility cannot be located - ipsets are not saved"
-	    ;;
-    esac
-
-    if [ -n "$IPSET" ]; then
-        if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then
-            #
-            # The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny
-            #
-            hack='| grep -v /31'
-        else
-            hack=
-        fi
-
-        if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then
-            #
-            # Don't save an 'empty' file
-            #
-            grep -qE '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${VARDIR}/ipsets.save
-        fi
-    fi
-EOF
+    if ( @ipsets || @{$globals{SAVED_IPSETS}} || ( $config{SAVE_IPSETS} && have_ipset_rules ) ) {
+	emit( '',
+	      '    save_ipsets ${VARDIR}/ipsets.save' );
     }
-
+	
     emit '
 
     set_state "Stopped"

Shorewall/Perl/Shorewall/Proc.pm

@@ -42,6 +42,7 @@ our @EXPORT = qw(
 		 setup_source_routing
 		 setup_accept_ra
 		 setup_forwarding
+                 setup_log_backend
 		 );
 our @EXPORT_OK = qw( setup_interface_proc );
 our $VERSION = 'MODULEVERSION';
@@ -348,5 +349,43 @@ sub setup_interface_proc( $ ) {
     }
 }
 
+sub setup_log_backend($) {
+    if ( my $setting = $config{LOG_BACKEND} ) {
+	my $family   = shift;
+	my $file     = '/proc/sys/net/netfilter/nf_log/' . ( $family == F_IPV4 ? '2' : '10' );
+
+	emit( 'progress_message2 "Setting up log backend"',
+	      '',
+	      "if [ -f $file ]; then"
+	    );
+
+	if ( $setting =~ /ip6?t_log/i ) {
+	    my $alternative = 'nf_log_ipv' . $family;
+
+	    emit( "    setting=$setting",
+		  '',
+		  "    fgrep -q $setting /proc/net/netfilter/nf_log || setting=$alternative",
+		  '',
+		  "    if echo \$setting > $file; then",
+		  '       progress_message "Log Backend set to $setting"',
+		  '   else',
+		  '       error_message "WARNING: Unable to set log backend to $setting"',
+		  '   fi',
+		  'else',
+		  "    error_message 'WARNING: $file does not exist - log backend not set'",
+		  "fi\n"
+		);
+	} else {
+	    emit( "    if echo $setting > $file; then",
+		  "        progress_message 'Log Backend set to $setting'",
+		  '    else',
+		  "        error_message 'WARNING: Unable to set log backend to $setting'",
+		  '    fi',
+		  'else',
+		  "    error_message 'WARNING: $file does not exist - log backend not set'",
+		  "fi\n" );
+	}
+    }
+}
 
 1;

Shorewall/Perl/Shorewall/Providers.pm

@@ -258,7 +258,7 @@ sub copy_and_edit_table( $$$$$ ) {
     emit '';
 
     if ( $realm ) {
-	emit  ( "\$IP -$family -o route show table $duplicate | sed -r 's/ realm [[:alnum:]]+//' | ${filter}while read net route; do" )
+	emit  ( "\$IP -$family -o route show table $duplicate | sed -r 's/ realm [[:alnum:]_]+//' | ${filter}while read net route; do" )
     } else {
 	emit  ( "\$IP -$family -o route show table $duplicate | ${filter}while read net route; do" )
     }
@@ -442,10 +442,11 @@ sub process_a_provider( $ ) {
 
     fatal_error 'INTERFACE must be specified' if $interface eq '-';
 
-    ( $interface, my $address ) = split /:/, $interface;
+    ( $interface, my $address ) = split /:/, $interface, 2;
 
     my $shared = 0;
     my $noautosrc = 0;
+    my $mac = '';
 
     if ( defined $address ) {
 	validate_address $address, 0;
@@ -453,10 +454,33 @@ sub process_a_provider( $ ) {
 	require_capability 'REALM_MATCH', "Configuring multiple providers through one interface", "s";
     }
 
-    fatal_error "Unknown Interface ($interface)" unless known_interface( $interface );
+    my $interfaceref = known_interface( $interface );
+
+    fatal_error "Unknown Interface ($interface)" unless $interfaceref;
+
     fatal_error "A bridge port ($interface) may not be configured as a provider interface" if port_to_bridge $interface;
 
-    my $physical    = get_physical $interface;
+    #
+    # Switch to the logical name if a physical name was passed
+    #
+    my $physical;
+
+    if ( $interface eq $interfaceref->{name} ) {
+	#
+	# The logical interface name was specified
+	#
+	$physical = $interfaceref->{physical};
+    } else {
+	#
+	# A Physical name was specified
+	#
+	$physical = $interface;
+	#
+	# Switch to the logical name unless it is a wildcard
+	#
+	$interface = $interfaceref->{name} unless $interfaceref->{wildcard};
+    } 
+
     my $gatewaycase = '';
 
     if ( $physical =~ /\+$/ ) {
@@ -469,7 +493,17 @@ sub process_a_provider( $ ) {
 	$gateway = get_interface_gateway $interface;
 	$gatewaycase = 'detect';
     } elsif ( $gateway && $gateway ne '-' ) {
+	( $gateway, $mac ) = split_host_list( $gateway, 0 );
 	validate_address $gateway, 0;
+
+	if ( defined $mac ) {
+	    $mac =~ tr/-/:/;
+	    $mac =~ s/^~//;
+	    fatal_error "Invalid MAC address ($mac)" unless $mac =~ /^(?:[0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}$/;
+	} else {
+	    $mac = '';
+	}
+
 	$gatewaycase = 'specified';
     } else {
 	$gatewaycase = 'none';
@@ -644,6 +678,7 @@ sub process_a_provider( $ ) {
 			   loose       => $loose ,
 			   duplicate   => $duplicate ,
 			   address     => $address ,
+			   mac         => $mac ,
 			   local       => $local ,
 			   tproxy      => $tproxy ,
 			   load        => $load ,
@@ -720,6 +755,7 @@ sub add_a_provider( $$ ) {
     my $loose       = $providerref->{loose};
     my $duplicate   = $providerref->{duplicate};
     my $address     = $providerref->{address};
+    my $mac         = $providerref->{mac};
     my $local       = $providerref->{local};
     my $tproxy      = $providerref->{tproxy};
     my $load        = $providerref->{load};
@@ -733,7 +769,7 @@ sub add_a_provider( $$ ) {
     my $realm = '';
 
     if ( $shared ) {
-	my $variable = $providers{$table}{mac} = get_interface_mac( $gateway, $interface , $table );
+	my $variable = $providers{$table}{mac} = get_interface_mac( $gateway, $interface , $table, $mac );
 	$realm = "realm $number";
 	start_provider( $label , $table, $number, $id, qq(if interface_is_usable $physical && [ -n "$variable" ]; then) );
     } elsif ( $pseudo ) {
@@ -1260,9 +1296,11 @@ sub start_providers() {
 	    emit_unindented "$providers{$_}{number}\t$_" unless $providers{$_}{pseudo};
 	}
 
-	emit_unindented "EOF\n";
+	emit_unindented 'EOF';
 
-	emit "fi\n";
+	emit( 'else',
+	      '    error_message "WARNING: /etc/iproute2/rt_tables is missing or is not writeable"',
+	      "fi\n" );
     }
 
     emit  ( '#',
@@ -1859,8 +1897,10 @@ sub handle_optional_interfaces( $ ) {
 
     if ( @$interfaces ) {
 	my $require     = $config{REQUIRE_INTERFACE};
+	my $gencase     = shift;
 
-	verify_required_interfaces( shift );
+	verify_required_interfaces( $gencase );
+	emit '' if $gencase;
 
 	emit( 'HAVE_INTERFACE=', '' ) if $require;
 	#

Shorewall/Perl/Shorewall/Rules.pm

@@ -818,9 +818,7 @@ sub apply_policy_rules() {
     progress_message2 'Applying Policies...';
 
     for my $chainref ( @policy_chains ) {
-	my $policy      = $chainref->{policy};
-
-	unless ( $policy eq 'NONE' ) {
+	unless ( ( my $policy = $chainref->{policy} ) eq 'NONE' ) {
 	    my $loglevel    = $chainref->{loglevel};
 	    my $provisional = $chainref->{provisional};
 	    my $default     = $chainref->{default};
@@ -1673,9 +1671,11 @@ sub process_action($$) {
 	    $origdest = $connlimit = $time = $headers = $condition = $helper = '-';
 	} else {
 	    ($target, $source, $dest, $proto, $ports, $sports, $origdest, $rate, $user, $mark, $connlimit, $time, $headers, $condition, $helper )
-		= split_line1( 'action file',
+		= split_line2( 'action file',
 			       \%rulecolumns,
-			       $action_commands );
+			       $action_commands,
+			       undef,
+			       1 );
 	}
 
 	fatal_error 'TARGET must be specified' if $target eq '-';
@@ -1748,14 +1748,15 @@ sub process_actions() {
 						    undef, #Columns
 						    1 );   #Allow inline matches
 
-	    my $type     = ( $action eq $config{REJECT_ACTION} ? INLINE : ACTION );
-	    my $noinline = 0;
-	    my $nolog    = ( $type == INLINE ) || 0;
-	    my $builtin  = 0;
-	    my $raw      = 0;
-	    my $mangle   = 0;
-	    my $filter   = 0;
-	    my $nat      = 0;
+	    my $type        = ( $action eq $config{REJECT_ACTION} ? INLINE : ACTION );
+	    my $noinline    = 0;
+	    my $nolog       = ( $type == INLINE ) || 0;
+	    my $builtin     = 0;
+	    my $raw         = 0;
+	    my $mangle      = 0;
+	    my $filter      = 0;
+	    my $nat         = 0;
+	    my $terminating = 0;
 
 	    if ( $action =~ /:/ ) {
 		warning_message 'Default Actions are now specified in /etc/shorewall/shorewall.conf';
@@ -1774,6 +1775,8 @@ sub process_actions() {
 			$nolog = 1;
 		    } elsif ( $_ eq 'builtin' ) {
 			$builtin = 1;
+		    } elsif ( $_ eq 'terminating' ) {
+			$terminating = 1;
 		    } elsif ( $_ eq 'mangle' ) {
 			$mangle = 1;
 		    } elsif ( $_ eq 'raw' ) {
@@ -1822,6 +1825,8 @@ sub process_actions() {
 		}
 
 		$targets{$action} = $actiontype;
+
+		make_terminating( $action ) if $terminating;
 	    } else {
 		fatal_error "Table names are only allowed for builtin actions" if $mangle || $raw || $nat || $filter;
 		new_action $action, $type, $noinline, $nolog;
@@ -2374,7 +2379,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$ ) {
 		      my ( $tgt, $options ) = split / /, $param;
 		      my $target_type = $builtin_target{$tgt};
 		      fatal_error "Unknown target ($tgt)" unless $target_type;
-		      fatal_error "The $tgt TARGET is now allowed in the filter table" unless $target_type & FILTER_TABLE;
+		      fatal_error "The $tgt TARGET is not allowed in the filter table" unless $target_type & FILTER_TABLE;
 		      $action = $param;
 		  } else {
 		      $action = '';
@@ -2387,7 +2392,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$ ) {
 		      my ( $tgt, $options ) = split / /, $param;
 		      my $target_type = $builtin_target{$tgt};
 		      fatal_error "Unknown target ($tgt)" unless $target_type;
-		      fatal_error "The $tgt TARGET is now allowed in the filter table" unless $target_type & FILTER_TABLE;
+		      fatal_error "The $tgt TARGET is not allowed in the filter table" unless $target_type & FILTER_TABLE;
 		      $action = $param;
 		  } else {
 		      $action = '';
@@ -2950,7 +2955,7 @@ sub perl_action_helper($$;$) {
 
     $matches .= ' ' unless $matches =~ /^(?:.+\s)?$/;
 
-    set_inline_matches $matches if $target =~ /^INLINE(?::.*)?$/;
+    set_inline_matches( $target =~ /^INLINE(?::.*)?$/ ? $matches : '' );
 
     if ( $isstatematch ) {
 	if ( $statematch ) {
@@ -3023,6 +3028,8 @@ sub perl_action_tcp_helper($$) {
 
     $proto .= ' ' unless $proto =~ /^(?:.+\s)?$/;
 
+    set_inline_matches( '' ) if $config{INLINE_MATCHES};
+
     if ( $passedproto eq '-' || $passedproto eq 'tcp' || $passedproto eq '6' ) {
 	#
 	# For other protos, a 'no rule generated' warning will be issued

Shorewall/Perl/Shorewall/Tc.pm

@@ -174,8 +174,8 @@ sub initialize( $ ) {
 #
 # Process a rule from the tcrules or mangle file
 #
-sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
-    our ( $file, $action, $source, $dest, $proto, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $headers, $probability , $dscp , $state ) = @_;
+sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$ ) {
+    our ( $file, $action, $source, $dest, $proto, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $headers, $probability , $dscp , $state, $time ) = @_;
 
     use constant {
 	PREROUTING     => 1,        #Actually tcpre
@@ -229,7 +229,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 
     sub handle_mark_param( $$ ) {
 	my ( $option, $marktype ) = @_;
-	my $and_or = $1 if $params =~ s/^([|&])//;
+	my $and_or = $params =~ s/^([|&])// ? $1 : '';
 
 	if ( $params =~ /-/ ) {
 	    #
@@ -423,7 +423,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 	    function       => sub () {
 		require_capability 'DSCP_TARGET', 'The DSCP action', 's';
 		my $dscp = numeric_value( $params );
-		$dscp = $dscpmap{$1} unless defined $dscp;
+		$dscp = $dscpmap{$params} unless defined $dscp;
 		fatal_error( "Invalid DSCP ($params)" ) unless defined $dscp && $dscp <= 0x38 && ! ( $dscp & 1 );
 		$target = 'DSCP --set-dscp ' . in_hex( $dscp );
 	    },
@@ -556,13 +556,13 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 	    mask           => in_hex( $globals{TC_MASK} ),
 	    function       => sub () {
 		$target = 'MARK';
-		handle_mark_param('--set-mark', , HIGHMARK );
+		handle_mark_param('', , HIGHMARK );
 	    },
 	},
 
 	RESTORE    => {
 	    defaultchain   => 0,
-	    allowedchains  => PREROUTING | FORWARD | POSTROUTING,
+	    allowedchains  => PREROUTING | FORWARD | OUTPUT | POSTROUTING,
 	    minparams      => 0,
 	    maxparams      => 1,
 	    function       => sub () {
@@ -591,7 +591,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 
 	SAVE       => {
 	    defaultchain   => 0,
-	    allowedchains  => PREROUTING | FORWARD | POSTROUTING,
+	    allowedchains  => PREROUTING | FORWARD | OUTPUT | POSTROUTING,
 	    minparams      => 0,
 	    maxparams      => 1,
 	    function       => sub () {
@@ -798,6 +798,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 					 do_probability( $probability ) .
 					 do_dscp( $dscp ) .
 					 state_match( $state ) .
+					 do_time( $time ) .
 					 $raw_matches ,
 					 $source ,
 					 $dest ,
@@ -926,21 +927,22 @@ sub process_tc_rule1( $$$$$$$$$$$$$$$$ ) {
 	$designator = '';
     }
 
-    my ( $cmd, $rest );
-
-    if ( $mark =~ /^TOS/ ) {
-	$cmd = $mark;
-	$rest = '';
-    } else {
-	($cmd, $rest) = split( '/', $mark, 2 );
-    }
-
     unless ( $command ) {
 	{
-	    if ( $cmd =~ /^([A-Z]+)/ ) {
+	    my ( $cmd, $rest ) = split( '/', $mark, 2 );
+
+	    if ( $cmd =~ /^([A-Z]+)(?:\((.+)\))?/ ) {
 		if ( my $tccmd = $tccmd{$1} ) {
 		    fatal_error "Invalid $1 ACTION ($originalmark)" unless $tccmd->{match}($cmd); 
-		    $command = $tccmd->{command} if $tccmd->{command};
+		    $command = $1;
+		    if ( supplied $rest ) {
+			fatal_error "Invalid $1 ACTION ($originalmark)" if supplied $2;
+			$mark = $rest;
+		    } elsif ( supplied $2 ) {
+			$mark = $2;
+		    } else {
+			$mark = '';
+		    }
 		}
 	    } else {
 		$command = 'MARK';
@@ -986,7 +988,9 @@ sub process_tc_rule1( $$$$$$$$$$$$$$$$ ) {
 			      $headers,
 			      $probability,
 			      $dscp,
-			      $state );
+			      $state,
+			      '-',
+	    );
     }
 }
 
@@ -1046,9 +1050,9 @@ sub process_tc_rule( ) {
 }    
 
 sub process_mangle_rule( ) {
-    my ( $originalmark, $source, $dest, $protos, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $headers, $probability , $dscp , $state );
+    my ( $originalmark, $source, $dest, $protos, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $headers, $probability , $dscp , $state, $time );
     if ( $family == F_IPV4 ) {
-	( $originalmark, $source, $dest, $protos, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $probability, $dscp, $state ) =
+	( $originalmark, $source, $dest, $protos, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $probability, $dscp, $state, $time ) =
 	    split_line2( 'tcrules file',
 			 { mark => 0,
 			   action => 0,
@@ -1065,13 +1069,15 @@ sub process_mangle_rule( ) {
 			   helper => 11,
 			   probability => 12 , 
 			   scp => 13,
-			   state => 14 },
+			   state => 14,
+			   time => 15,
+			 },
 			 {},
-			 15,
+			 16,
 	                 1 );
 	$headers = '-';
     } else {
-	( $originalmark, $source, $dest, $protos, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $headers, $probability, $dscp, $state ) =
+	( $originalmark, $source, $dest, $protos, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $headers, $probability, $dscp, $state, $time ) =
 	    split_line2( 'tcrules file',
 			 { mark => 0,
 			   action => 0,
@@ -1089,14 +1095,16 @@ sub process_mangle_rule( ) {
 			   headers => 12,
 			   probability => 13,
 			   dscp => 14,
-			   state => 15 },
+			   state => 15,
+			   time => 16,
+			 },
 			 {},
-			 16,
+			 17,
 	                 1 );
     }
 
     for my $proto (split_list( $protos, 'Protocol' ) ) {
-	process_mangle_rule1( 'Mangle', $originalmark, $source, $dest, $proto, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $headers, $probability , $dscp , $state );
+	process_mangle_rule1( 'Mangle', $originalmark, $source, $dest, $proto, $ports, $sports, $user, $testval, $length, $tos , $connbytes, $helper, $headers, $probability , $dscp , $state, $time );
     }
 }
  

Shorewall/Perl/Shorewall/Zones.pm

@@ -193,6 +193,7 @@ our %reservedName = ( all => 1,
 #                                     physical    => <physical interface name>
 #                                     base        => <shell variable base representing this interface>
 #                                     provider    => <Provider Name, if interface is associated with a provider>
+#                                     wildcard    => undef|1 # Wildcard Name
 #                                     zones       => { zone1 => 1, ... }
 #                                   }
 #                 }
@@ -1375,6 +1376,7 @@ sub process_interface( $$ ) {
 						       base       => var_base( $physical ),
 						       zones      => {},
 						       origin     => shortlineinfo(''),
+						       wildcard   => $wildcard,
 						     };
 
     if ( $zone ) {
@@ -1497,7 +1499,7 @@ sub map_physical( $$ ) {
 
     $physical =~ s/\+$//;
 
-    $physical . substr( $name, length  $interfaceref->{root} );
+    $physical . substr( $name, length( $interfaceref->{root} ) );
 }
 
 #
@@ -1531,6 +1533,7 @@ sub known_interface($)
 						   number   => $interfaceref->{number} ,
 						   physical => $physical ,
 						   base     => var_base( $physical ) ,
+						   wildcard => $interfaceref->{wildcard} ,
 						   zones    => $interfaceref->{zones} ,
 						 };
 	    }
@@ -1768,7 +1771,7 @@ sub find_interfaces_by_option1( $ ) {
 	my $optionsref = $interfaceref->{options};
 
 	if ( $optionsref && defined $optionsref->{$option} ) {
-	    $wild ||= ( $interfaceref->{physical} =~ /\+$/ );
+	    $wild ||= $interfaceref->{wildcard};
 	    push @ints , $interface
 	}
     }
@@ -2118,14 +2121,26 @@ sub have_ipsec() {
 sub find_hosts_by_option( $ ) {
     my $option = $_[0];
     my @hosts;
+    my %done;
+
+    for my $interface ( @interfaces ) {
+	my $value = $interfaces{$interface}{options}{$option};
+	if ( ! $interfaces{$interface}{zone} && $value ) {
+	    push @hosts, [ $interface, '', ALLIP , [], $value ];
+	    $done{$interface} = 1;
+	}
+    }
 
     for my $zone ( grep ! ( $zones{$_}{type} & FIREWALL ) , @zones ) {
 	while ( my ($type, $interfaceref) = each %{$zones{$zone}{hosts}} ) {
 	    while ( my ( $interface, $arrayref) = ( each %{$interfaceref} ) ) {
 		for my $host ( @{$arrayref} ) {
-		    if ( my $value = $host->{options}{$option} ) {
-			for my $net ( @{$host->{hosts}} ) {
-			    push @hosts, [ $interface, $host->{ipsec} , $net , $host->{exclusions}, $value ];
+		    my $ipsec = $host->{ipsec};
+		    unless ( $done{$interface} ) { 
+			if ( my $value = $host->{options}{$option} ) {
+			    for my $net ( @{$host->{hosts}} ) {
+				push @hosts, [ $interface, $ipsec , $net , $host->{exclusions}, $value ];
+			    }
 			}
 		    }
 		}
@@ -2133,12 +2148,6 @@ sub find_hosts_by_option( $ ) {
 	}
     }
 
-    for my $interface ( @interfaces ) {
-	if ( ! $interfaces{$interface}{zone} && $interfaces{$interface}{options}{$option} ) {
-	    push @hosts, [ $interface, 'none', ALLIP , [] ];
-	}
-    }
-
     \@hosts;
 }
 

Shorewall/Perl/lib.core

@@ -587,7 +587,7 @@ debug_restore_input() {
     done
 }
 
-interface_up() {
+interface_enabled() {
     return $(cat ${VARDIR}/$1.status)
 }
 
@@ -604,7 +604,7 @@ distribute_load() {
     totalload=0
 
     for interface in $@; do
-	if interface_up $interface; then
+	if interface_enabled $interface; then
 	    load=$(cat ${VARDIR}/${interface}_load)
 	    eval ${interface}_load=$load
 	    mark=$(cat ${VARDIR}/${interface}_mark)

Shorewall/Perl/prog.footer

@@ -17,8 +17,10 @@ usage() {
     echo "   reset"
     echo "   refresh"
     echo "   restart"
+    echo "   run <command> [ <parameter> ... ]"
     echo "   status"
     echo "   up <interface>"
+    echo "   savesets <file>"
     echo "   version"
     echo
     echo "Options are:"
@@ -27,6 +29,7 @@ usage() {
     echo "   -n               Don't update routing configuration"
     echo "   -p               Purge Conntrack Table"
     echo "   -t               Timestamp progress Messages"
+    echo "   -c               Save/restore iptables counters"
     echo "   -V <verbosity>   Set verbosity explicitly"
     echo "   -R <file>        Override RESTOREFILE setting"
     exit $1
@@ -84,6 +87,17 @@ g_purge=$PURGE
 g_noroutes=$NOROUTES
 g_timestamp=$TIMESTAMP
 g_recovering=$RECOVERING
+#
+# These two variables contain the high-order and low-order parts respectively of
+# an SHA1 digest of this file. The digest is generated before the two following
+# lines are updated to contain the value of that digest.
+#
+g_sha1sum1=
+g_sha1sum2=
+#
+# Other Globals
+#
+g_counters=
 
 initialize
 
@@ -135,6 +149,10 @@ while [ $finished -eq 0 -a $# -gt 0 ]; do
 			g_recovering=Yes
 			option=${option#r}
 			;;
+		    c*)
+			g_counters=Yes
+			option=${option#c}
+			;;
 		    V*)
 			option=${option#V}
 
@@ -371,6 +389,24 @@ case "$COMMAND" in
 	fi
 	status=0
 	;;
+    run)
+	if [ $# -gt 1 ]; then
+	    shift
+	    detect_configuration
+	    run_init_exit
+	    eval $@
+	    status=$?
+	else
+	    error_message "ERROR: Missing command"
+	fi
+	;;
+    savesets)
+	if [ $# -eq 2 ]; then
+	    save_ipsets $2
+	else
+	    usage 2
+	fi
+	;;
     version)
 	[ $# -ne 1 ] && usage 2
 	echo $SHOREWALL_VERSION

Shorewall/Samples/Universal/interfaces

@@ -11,4 +11,4 @@
 ###############################################################################
 #ZONE	INTERFACE	OPTIONS
 -	lo		ignore
-net	all		dhcp,physical=+,routeback,optional
+net	all		dhcp,physical=+,routeback

Shorewall/Samples/Universal/shorewall.conf

@@ -25,6 +25,8 @@ BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
 
+LOG_BACKEND=
+
 LOG_MARTIANS=Yes
 
 LOG_VERBOSITY=2

Shorewall/Samples/one-interface/README.txt

@@ -3,7 +3,7 @@ For instructions on using this sample configuration, please see
 http://www.shorewall.net/standalone.htm
 
     Shorewall Samples
-    Copyright (C) 2006 by the following authors:
+    Copyright (C) 2006-2014 by the following authors:
 	Thomas M. Eastep
 	Paul D. Gear
 	Cristian Rodriguez

Shorewall/Samples/one-interface/interfaces

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Interfaces File for one-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/one-interface/policy

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Policy File for one-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/one-interface/rules

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Rules File for one-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/one-interface/shorewall.conf

@@ -2,7 +2,7 @@
 #
 # Shorewall version 4.0 - Sample shorewall.conf for one-interface
 #                         configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -36,6 +36,8 @@ BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
 
+LOG_BACKEND=
+
 LOG_MARTIANS=Yes
 
 LOG_VERBOSITY=2

Shorewall/Samples/one-interface/zones

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Zones File for one-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/three-interfaces/README.txt

@@ -3,7 +3,7 @@ For instructions on using these sample configurations, please see
 http://www.shorewall.net/three-interface.htm
 
     Shorewall Samples
-    Copyright (C) 2006 by the following authors:
+    Copyright (C) 2006-2014 by the following authors:
 	Thomas M. Eastep
 	Paul D. Gear
 	Cristian Rodriguez

Shorewall/Samples/three-interfaces/interfaces

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Interfaces File for three-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/three-interfaces/masq

@@ -1,6 +1,6 @@
 #
 # Shorewall version 3.4 - Sample Masq file for three-interface configuration.
-# Copyright (C) 2006,2007 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/three-interfaces/policy

@@ -1,6 +1,6 @@
 #
 # Shorewall version 3.4 - Sample Policy File for three-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/three-interfaces/rules

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Rules File for three-interface configuration.
-# Copyright (C) 2006,2007 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/three-interfaces/shorewall.conf

@@ -2,8 +2,7 @@
 #
 # Shorewall version 4.0 - Sample shorewall.conf for three-interface
 #                         configuration.
-# Copyright (C) 2006 by the Shorewall Team
-#               2011 by Thomas M. Eastep
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -34,6 +33,8 @@ BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
 
+LOG_BACKEND=
+
 LOG_MARTIANS=Yes
 
 LOG_VERBOSITY=2

Shorewall/Samples/three-interfaces/zones

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Zones File for three-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/two-interfaces/README.txt

@@ -3,7 +3,7 @@ For instructions on using these sample configurations, please see
 http://www.shorewall.net/two-interface.htm
 
     Shorewall Samples
-    Copyright (C) 2006 by the following authors:
+    Copyright (C) 2006-2014 by the following authors:
 	Thomas M. Eastep
 	Paul D. Gear
 	Cristian Rodriguez

Shorewall/Samples/two-interfaces/interfaces

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Interfaces File for two-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/two-interfaces/masq

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Masq file for two-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/two-interfaces/policy

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Policy File for two-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/two-interfaces/rules

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Rules File for two-interface configuration.
-# Copyright (C) 2006,2007 by the Shorewall Team
+# Copyright (C) 2006-2014,2007 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/Samples/two-interfaces/shorewall.conf

@@ -2,8 +2,7 @@
 #
 # Shorewall version 4.0 - Sample shorewall.conf for two-interface
 #                         configuration.
-# Copyright (C) 2006,2007 by the Shorewall Team
-#               2011 by Thomas M. Eastep
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -37,6 +36,8 @@ BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
 
+LOG_BACKEND=
+
 LOG_MARTIANS=Yes
 
 LOG_VERBOSITY=2

Shorewall/Samples/two-interfaces/zones

@@ -1,6 +1,6 @@
 #
 # Shorewall version 4.0 - Sample Zones File for two-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
+# Copyright (C) 2006-2014 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

Shorewall/action.DNSAmp

@@ -0,0 +1,34 @@
+#
+# Shorewall 4 - DNS Amplification Action
+#
+#    /usr/share/shorewall/action.DNSAmp
+#
+#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+#     (c) 2011,2012 - Tom Eastep (teastep@shorewall.net)
+#
+#       Complete documentation is available at http://shorewall.net
+#
+#       This program is free software; you can redistribute it and/or modify
+#       it under the terms of Version 2 of the GNU General Public License
+#       as published by the Free Software Foundation.
+#
+#       This program is distributed in the hope that it will be useful,
+#       but WITHOUT ANY WARRANTY; without even the implied warranty of
+#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#       GNU General Public License for more details.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+#   DNSAmp[([<action>])]
+#
+#       Default action is DROP
+#
+##########################################################################################
+?format 2
+
+DEFAULTS DROP
+
+IPTABLES(@1)	-	-	udp	53	; -m u32 --u32 "0>>22&0x3C\@8&0xffff=0x0100 && 0>>22&0x3C\@12&0xffff0000=0x00010000"

Shorewall/actions.std

@@ -31,6 +31,7 @@ allowInvalid inline		# Accepts packets in the INVALID conntrack state
 AutoBL       noinline           # Auto-blacklist IPs that exceed thesholds
 AutoBLL      noinline           # Helper for AutoBL
 Broadcast    noinline           # Handles Broadcast/Multicast/Anycast
+DNSAmp                          # Matches one-question recursive DNS queries
 Drop		                # Default Action for DROP policy
 dropInvalid  inline		# Drops packets in the INVALID conntrack state
 DropSmurfs   noinline           # Drop smurf packets

Shorewall/configfiles/shorewall.conf

@@ -25,6 +25,8 @@ BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
 
+LOG_BACKEND=
+
 LOG_MARTIANS=Yes
 
 LOG_VERBOSITY=2

Shorewall/default.debian

@@ -16,7 +16,7 @@ startup=0
 #    wait_interface=
 
 #
-# Global start/restart/stop options
+# Global start/restart options
 #
 OPTIONS=""
 

Shorewall/helpers

@@ -57,3 +57,15 @@ loadmodule nf_nat_proto_gre
 loadmodule nf_nat_sip
 loadmodule nf_nat_snmp_basic
 loadmodule nf_nat_tftp
+#
+# While not actually helpers, these are included here so that
+# LOG_BACKEND can work correctly. Not all of them will be
+# loaded, since at least one of them will be an alias on any
+# given system.
+#
+loadmodule ipt_LOG
+loadmodule nf_log_ipv4
+loadmodule xt_LOG
+loadmodule xt_NFLOG
+loadmodule ipt_ULOG
+loadmodule nfnetlink_log

Shorewall/init.fedora.sh

@@ -39,7 +39,7 @@ fi
 
 start() {
     echo -n $"Starting Shorewall: "
-    $shorewall $OPTIONS start 2>&1 | $logger
+    $shorewall $OPTIONS start $STARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile
@@ -69,7 +69,7 @@ restart() {
 # Note that we don't simply stop and start since shorewall has a built in
 # restart which stops the firewall if running and then starts it.
     echo -n $"Restarting Shorewall: "
-    $shorewall $OPTIONS restart 2>&1 | $logger
+    $shorewall $OPTIONS restart $RESTARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile

Shorewall/init.slackware.shorewall.sh

@@ -10,15 +10,16 @@
 
 OPTIONS=""
 
-# Use /etc/default shorewall to specify $OPTIONS to run at startup, however this
-# this might prevent shorewall from starting. use at your own risk
+# Use /etc/default shorewall to specify $OPTIONS and STARTOPTIONS to
+# run at startup, however this this might prevent shorewall from
+# starting. use at your own risk
 if [ -f /etc/default/shorewall ] ; then
     . /etc/default/shorewall
 fi
 
 start() {
 	echo "Starting IPv4 shorewall rules..."
-	exec /sbin/shorewall $OPTIONS start
+	exec /sbin/shorewall $OPTIONS start $STARTOPTIONS
 }
 
 stop() {
@@ -28,7 +29,7 @@ stop() {
 
 restart() {
 	echo "Restarting IPv4 shorewall rules..."
-	exec /sbin/shorewall restart
+	exec /sbin/shorewall restart $RESTARTOPTIONS
 }
 
 status() {

Shorewall/install.sh

@@ -35,6 +35,7 @@ usage() # $1 = exit status
     echo "       $ME -h"
     echo "       $ME -s"
     echo "       $ME -a"
+    echo "       $ME -n"
     exit $1
 }
 
@@ -118,6 +119,7 @@ T="-T"
 INSTALLD='-D'
 
 finished=0
+configure=1
 
 while [ $finished -eq 0 ]; do
     option=$1
@@ -147,6 +149,10 @@ while [ $finished -eq 0 ]; do
 			ANNOTATED=
 			option=${option#p}
 			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
 		    *)
 			usage 1
 			;;
@@ -203,9 +209,11 @@ done
 
 [ -n "${INITFILE}" ] && require INITSOURCE && require INITDIR
 
+[ -n "$SANDBOX" ] && configure=0
+
 if [ -z "$BUILD" ]; then
     case $(uname) in
-	cygwin*)
+	cygwin*|CYGWIN*)
 	    BUILD=cygwin
 	    ;;
 	Darwin)
@@ -216,7 +224,7 @@ if [ -z "$BUILD" ]; then
 		eval $(cat /etc/os-release | grep ^ID)
 
 		case $ID in
-		    fedora|rhel)
+		    fedora|rhel|centos|foobar)
 			BUILD=redhat
 			;;
 		    debian)
@@ -324,6 +332,7 @@ if [ $PRODUCT = shorewall ]; then
 	if ! perl -e 'use Digest::SHA;' 2> /dev/null ; then
 	    if perl -e 'use Digest::SHA1;' 2> /dev/null ; then
 		sed -i 's/Digest::SHA/Digest::SHA1/' Perl/Shorewall/Chains.pm
+		sed -i 's/Digest::SHA/Digest::SHA1/' Perl/Shorewall/Config.pm
 		DIGEST=SHA1
 	    else
 		echo "ERROR: Shorewall $VERSION requires either Digest::SHA or Digest::SHA1" >&2
@@ -399,7 +408,7 @@ fi
 #
 # Create /etc/$PRODUCT and other directories
 #
-mkdir -p ${DESTDIR}/${CONFDIR}/$PRODUCT
+mkdir -p ${DESTDIR}${CONFDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${PERLLIBDIR}/Shorewall
 mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles
@@ -417,12 +426,16 @@ fi
 #
 # Install the .service file
 #
-if [ -n "$SYSTEMD" ]; then
-    mkdir -p ${DESTDIR}${SYSTEMD}
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+if [ -n "$SERVICEDIR" ]; then
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
 
 #
@@ -1120,7 +1133,7 @@ chmod 644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 # Remove and create the symbolic link to the init script
 #
 
-if [ -z "$DESTDIR" ]; then
+if [ -z "${DESTDIR}" -a -n "${INITFILE}" ]; then
     rm -f ${SHAREDIR}/$PRODUCT/init
     ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
 fi
@@ -1167,8 +1180,8 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
     echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
-if [ -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
-    if [ -n "$SYSTEMD" ]; then
+if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
+    if [ -n "$SERVICEDIR" ]; then
 	if systemctl enable ${PRODUCT}.service; then
 	    echo "$Product will start automatically at boot"
 	fi

Shorewall/lib.cli-std

@@ -534,6 +534,10 @@ start_command() {
 			    g_inline=Yes
 			    option=${option#i}
 			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -570,14 +574,14 @@ start_command() {
     esac
 
     if [ -n "${g_fast}${AUTOMAKE}" ]; then
-	if [ -z "$g_fast" -o -z "$LEGACY_FASTSTART" ]; then
+	if [ -z "$g_fast" -o -z "${LEGACY_FASTSTART}${g_counters}" ]; then
 	    #
-	    # Automake or LEGACY_FASTSTART=No -- use the last compiled script
+	    # Automake or ( LEGACY_FASTSTART=No and not -C ) -- use the last compiled script
 	    #
 	    object=firewall
 	else
 	    #
-	    # 'start -f' with LEGACY_FASTSTART=Yes -- use last saved configuration
+	    # 'start -f' with ( LEGACY_FASTSTART=Yes or -C ) -- use last saved configuration
 	    #
 	    object=$RESTOREFILE
 	fi
@@ -943,6 +947,10 @@ restart_command() {
 			    g_inline=Yes
 			    option=${option#i}
 			    ;;
+			C*)
+			    g_counters=Yes
+			    option=${option#C}
+			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -1615,6 +1623,15 @@ export_command() # $* = original arguments less the command.
     fi
 }
 
+run_command() {
+    if [ -x ${VARDIR}/firewall ] ; then
+	uptodate ${VARDIR}/firewall || echo "   WARNING: ${VARDIR}/firewall is not up to date" >&2
+	run_it ${VARDIR}/firewall $g_debugging $@
+    else
+	fatal_error "${VARDIR}/firewall does not exist or is not executable"
+    fi
+}
+
 #
 # Give Usage Information
 #
@@ -1664,13 +1681,15 @@ usage() # $1 = exit status
     echo "   reject <address> ..."
     echo "   reload [ -s ] [ -c ] [ -r <root user> ] [ -T ] [ -i ] [ <directory> ] <system>"
     echo "   reset [ <chain> ... ]"
-    echo "   restart [ -n ] [ -p ] [-d] [ -f ] [ -c ] [ -T ] [ -i ] [ <directory> ]"
-    echo "   restore [ -n ] [ <file name> ]"
+    echo "   restart [ -n ] [ -p ] [-d] [ -f ] [ -c ] [ -T ] [ -i ] [ -C ] [ <directory> ]"
+    echo "   restore [ -n ] [ -p ] [ -C ] [ <file name> ]"
+    echo "   run <command> [ <parameter> ... ]"
     echo "   safe-restart [ -t <timeout> ] [ <directory> ]"
     echo "   safe-start [ -t <timeout> ] [ <directory> ]"
-    echo "   save [ <file name> ]"
+    echo "   save [ -C ] [ <file name> ]"
     echo "   [ show | list | ls ] [ -x ] [ -t {filter|mangle|nat|raw|rawpost} ] [ {chain [<chain> [ <chain> ... ]"
     echo "   [ show | list | ls ] actions"
+    echo "   [ show | list | ls ] [ -x ] {bl|blacklists}"
     echo "   [ show | list | ls ] [ -f ] capabilities"
     echo "   [ show | list | ls ] classifiers"
     echo "   [ show | list | ls ] config"
@@ -1694,11 +1713,11 @@ usage() # $1 = exit status
     echo "   [ show | list | ls ] tc [ device ]"
     echo "   [ show | list | ls ] vardir"
     echo "   [ show | list | ls ] zones"
-    echo "   start [ -f ] [ -n ] [ -p ] [ -c ] [ -T ] [ -i ] [ <directory> ]"
-    echo "   status"
+    echo "   start [ -f ] [ -n ] [ -p ] [ -c ] [ -T ] [ -i ] [ -C ] [ <directory> ]"
+    echo "   status [ -i ]"
     echo "   stop"
     echo "   try <directory> [ <timeout> ]"
-    echo "   update [ -a ] [ -b ] [ -r ] [ -T ] [ -D ] [ -i ] [-t] [-A] [ <directory> ]"
+    echo "   update [ -a ] [ -b ] [ -r ] [ -T ]  [ -D ] [ -i ] [-t] [-A] [ <directory> ]"
     echo "   version [ -a ]"
     echo
     exit $1

Shorewall/manpages/shorewall-actions.xml

@@ -71,10 +71,17 @@
                 role="bold">raw</emphasis>. If no table name(s) are given,
                 then <emphasis role="bold">filter</emphasis> is assumed. The
                 table names follow <emphasis role="bold">builtin</emphasis>
-                and are separated by commas; for example,
-                "FOOBAR,filter,mangle" would specify FOOBAR as a builtin
+                and are separated by commas; for example, "FOOBAR
+                builtin,filter,mangle" would specify FOOBAR as a builtin
                 target that can be used in the filter and mangle
                 tables.</para>
+
+                <para>Beginning with Shorewall 4.6.4, you may specify the
+                <emphasis role="bold">terminating</emphasis> option with
+                <emphasis role="bold">builtin</emphasis> to indicate to the
+                Shorewall optimizer that the action is terminating (the
+                current packet will not be passed to the next rule in the
+                chain).</para>
               </listitem>
             </varlistentry>
 
@@ -133,6 +140,17 @@
                 a subset of the rules.</para>
               </listitem>
             </varlistentry>
+
+            <varlistentry>
+              <term>terminating</term>
+
+              <listitem>
+                <para>Added in Shorewall 4.6.4. When used with
+                <replaceable>builtin</replaceable>, indicates that the
+                built-in action is termiating (i.e., if the action is jumped
+                to, the next rule in the chain is not evaluated).</para>
+              </listitem>
+            </varlistentry>
           </variablelist>
         </listitem>
       </varlistentry>

Shorewall/manpages/shorewall-mangle.xml

@@ -27,7 +27,7 @@
 
     <para>This file was introduced in Shorewall 4.6.0 and is intended to
     replace <ulink
-    url="/manpages/shorewall-mangle.html">shorewall-rules(5)</ulink>. This
+    url="/manpages/shorewall-tcrules.html">shorewall-tcrules(5)</ulink>. This
     file is only processed by the compiler if:</para>
 
     <orderedlist numeration="loweralpha">
@@ -1109,6 +1109,104 @@ Normal-Service       =&gt; 0x00</programlisting>
           of the listed states.</para>
         </listitem>
       </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">TIME</emphasis> -
+        <emphasis>timeelement</emphasis>[&amp;<emphasis>timeelement</emphasis>...]</term>
+
+        <listitem>
+          <para>Added in Shorewall 4.6.2.</para>
+
+          <para>May be used to limit the rule to a particular time period each
+          day, to particular days of the week or month, or to a range defined
+          by dates and times. Requires time match support in your kernel and
+          ip6tables.</para>
+
+          <para><replaceable>timeelement</replaceable> may be:</para>
+
+          <variablelist>
+            <varlistentry>
+              <term>timestart=<replaceable>hh</replaceable>:<replaceable>mm</replaceable>[:<replaceable>ss</replaceable>]</term>
+
+              <listitem>
+                <para>Defines the starting time of day.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>timestop=<replaceable>hh</replaceable>:<replaceable>mm</replaceable>[:<replaceable>ss</replaceable>]</term>
+
+              <listitem>
+                <para>Defines the ending time of day.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>utc</term>
+
+              <listitem>
+                <para>Times are expressed in Greenwich Mean Time.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>localtz</term>
+
+              <listitem>
+                <para>Deprecated by the Netfilter team in favor of <emphasis
+                role="bold">kerneltz</emphasis>. Times are expressed in Local
+                Civil Time (default).</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>kerneltz</term>
+
+              <listitem>
+                <para>Added in Shorewall 4.5.2. Times are expressed in Local
+                Kernel Time (requires iptables 1.4.12 or later).</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>weekdays=ddd[,ddd]...</term>
+
+              <listitem>
+                <para>where <replaceable>ddd</replaceable> is one of
+                <option>Mon</option>, <option>Tue</option>,
+                <option>Wed</option>, <option>Thu</option>,
+                <option>Fri</option>, <option>Sat</option> or
+                <option>Sun</option></para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>monthdays=dd[,dd],...</term>
+
+              <listitem>
+                <para>where <replaceable>dd</replaceable> is an ordinal day of
+                the month</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>datestart=<replaceable>yyyy</replaceable>[-<replaceable>mm</replaceable>[-<replaceable>dd</replaceable>[<option>T</option><replaceable>hh</replaceable>[:<replaceable>mm</replaceable>[:<replaceable>ss</replaceable>]]]]]</term>
+
+              <listitem>
+                <para>Defines the starting date and time.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>datestop=<replaceable>yyyy</replaceable>[-<replaceable>mm</replaceable>[-<replaceable>dd</replaceable>[<option>T</option><replaceable>hh</replaceable>[:<replaceable>mm</replaceable>[:<replaceable>ss</replaceable>]]]]]</term>
+
+              <listitem>
+                <para>Defines the ending date and time.</para>
+              </listitem>
+            </varlistentry>
+          </variablelist>
+        </listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 

Shorewall/manpages/shorewall-masq.xml

@@ -143,10 +143,10 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">SOURCE</emphasis> (Formerly called SUBNET)
-        -
-        {<emphasis>interface</emphasis>|<emphasis>address</emphasis>[<emphasis
-        role="bold">,</emphasis><emphasis>address</emphasis>][<emphasis>exclusion</emphasis>]}</term>
+        <term><emphasis role="bold">SOURCE</emphasis> (Formerly called SUBNET
+        - Optional) -
+        [<emphasis>interface</emphasis>|<emphasis>address</emphasis>[<emphasis
+        role="bold">,</emphasis><emphasis>address</emphasis>][<emphasis>exclusion</emphasis>]]</term>
 
         <listitem>
           <para>Set of hosts that you wish to masquerade. You can specify this

Shorewall/manpages/shorewall-policy.xml

@@ -242,13 +242,34 @@
 
       <varlistentry>
         <term><emphasis role="bold">BURST:LIMIT</emphasis> (limit) -
-        [{<emphasis>s</emphasis>|<emphasis
-        role="bold">d</emphasis>}:[[<replaceable>name</replaceable>]:]]]<emphasis>rate</emphasis><emphasis
-        role="bold">/</emphasis>{<emphasis
-        role="bold">second</emphasis>|<emphasis
-        role="bold">minute</emphasis>}[:<emphasis>burst</emphasis>]</term>
+        [-|<replaceable>limit</replaceable>]</term>
 
         <listitem>
+          <para>where limit is one of:</para>
+
+          <simplelist>
+            <member>[<emphasis
+            role="bold">-</emphasis>|[{<emphasis>s</emphasis>|<emphasis
+            role="bold">d</emphasis>}:[[<replaceable>name</replaceable>]:]]]<emphasis>rate</emphasis><emphasis
+            role="bold">/</emphasis>{<emphasis
+            role="bold">sec</emphasis>|<emphasis
+            role="bold">min</emphasis>|<emphasis
+            role="bold">hour</emphasis>|<emphasis
+            role="bold">day</emphasis>}[:<emphasis>burst</emphasis>]</member>
+
+            <member>[<replaceable>name</replaceable>1]:<emphasis>rate1</emphasis><emphasis
+            role="bold">/</emphasis>{<emphasis
+            role="bold">sec</emphasis>|<emphasis
+            role="bold">min</emphasis>|<emphasis
+            role="bold">hour</emphasis>|<emphasis
+            role="bold">day</emphasis>}[:<emphasis>burst1</emphasis>],[<replaceable>name</replaceable>2]:<emphasis>rate2</emphasis><emphasis
+            role="bold">/</emphasis>{<emphasis
+            role="bold">sec</emphasis>|<emphasis
+            role="bold">min</emphasis>|<emphasis
+            role="bold">hour</emphasis>|<emphasis
+            role="bold">day</emphasis>}[:<emphasis>burst2</emphasis>]</member>
+          </simplelist>
+
           <para>If passed, specifies the maximum TCP connection
           <emphasis>rate</emphasis> and the size of an acceptable
           <emphasis>burst</emphasis>. If not specified, TCP connections are
@@ -261,9 +282,19 @@
           the user and specifies a hash table to be used to count matching
           connections. If not give, the name <emphasis
           role="bold">shorewall</emphasis> is assumed. Where more than one
-          POLICY specifies the same name, the connections counts for the
-          policies are aggregated and the individual rates apply to the
+          POLICY or rule specifies the same name, the connections counts for
+          the policies are aggregated and the individual rates apply to the
           aggregated count.</para>
+
+          <para>Beginning with Shorewall 4.6.5, two<replaceable>
+          limit</replaceable>s may be specified, separated by a comma. In this
+          case, the first limit (<replaceable>name1</replaceable>,
+          <replaceable>rate1</replaceable>, burst1) specifies the per-source
+          IP limit and the second limit specifies the per-destination IP
+          limit.</para>
+
+          <para>Example: <emphasis
+          role="bold">client:10/sec:20,:60/sec:100</emphasis></para>
         </listitem>
       </varlistentry>
 

Shorewall/manpages/shorewall-providers.xml

@@ -129,11 +129,15 @@
 
       <varlistentry>
         <term><emphasis role="bold">GATEWAY</emphasis> - {<emphasis
-        role="bold">-</emphasis>|<emphasis>address</emphasis>|<emphasis
+        role="bold">-</emphasis>|<emphasis>address</emphasis>[,<emphasis>mac</emphasis>]|<emphasis
         role="bold">detect</emphasis>}</term>
 
         <listitem>
-          <para>The IP address of the provider's gateway router.</para>
+          <para>The IP address of the provider's gateway router. Beginning
+          with Shorewall 4.6.2, you may also specify the MAC address of the
+          gateway when there are multiple providers serviced through the same
+          interface. When the MAC is not specified, Shorewall will detect the
+          MAC during firewall start or restart.</para>
 
           <para>You can enter "detect" here and Shorewall will attempt to
           detect the gateway automatically.</para>

Shorewall/manpages/shorewall-rules.xml

@@ -476,24 +476,32 @@
             </varlistentry>
 
             <varlistentry>
-              <term>IPTABLES({<replaceable>target</replaceable>
+              <term>IPTABLES({<replaceable>iptables-target</replaceable>
               [<replaceable>option</replaceable> ...])</term>
 
               <listitem>
                 <para>This action allows you to specify an iptables target
                 with options (e.g., 'IPTABLES(MARK --set-xmark 0x01/0xff)'. If
-                the target is not one recognized by Shorewall, the following
-                error message will be issued:</para>
+                the <replaceable>iptables-target</replaceable> is not one
+                recognized by Shorewall, the following error message will be
+                issued:</para>
 
-                <simplelist>
-                  <member>ERROR: Unknown target
-                  (<replaceable>target</replaceable>)</member>
-                </simplelist>
+                <programlisting>    ERROR: Unknown target (<replaceable>iptables-target</replaceable>)</programlisting>
 
                 <para>This error message may be eliminated by adding the
-                <replaceable>target</replaceable> as a builtin action in
-                <ulink
+                <replaceable>iptables-</replaceable><replaceable>target</replaceable>
+                as a builtin action in <ulink
                 url="/manpages/shorewall-actions.html">shorewall-actions</ulink>(5).</para>
+
+                <important>
+                  <para>If you specify REJECT as the
+                  <replaceable>iptables-target</replaceable>, the target of
+                  the rule will be the iptables REJECT target and not
+                  Shorewall's builtin 'reject' chain which is used when REJECT
+                  (see below) is specified as the
+                  <replaceable>target</replaceable> in the ACTION
+                  column.</para>
+                </important>
               </listitem>
             </varlistentry>
 
@@ -993,7 +1001,7 @@
           role="bold">DNAT-</emphasis>, the connections will be assigned to
           addresses in the range in a round-robin fashion.</para>
 
-          <para>If you kernel and iptables have ipset match support then you
+          <para>If your kernel and iptables have ipset match support then you
           may give the name of an ipset prefaced by "+". The ipset name may be
           optionally followed by a number from 1 to 6 enclosed in square
           brackets ([]) to indicate the number of levels of destination
@@ -1218,22 +1226,41 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">RATE LIMIT</emphasis> (rate) - [<emphasis
-        role="bold">-</emphasis>|[{<emphasis>s</emphasis>|<emphasis
-        role="bold">d</emphasis>}:[[<replaceable>name</replaceable>]:]]]<emphasis>rate</emphasis><emphasis
-        role="bold">/</emphasis>{<emphasis
-        role="bold">sec</emphasis>|<emphasis
-        role="bold">min</emphasis>|<emphasis
-        role="bold">hour</emphasis>|<emphasis
-        role="bold">day</emphasis>}[:<emphasis>burst</emphasis>]</term>
+        <term><emphasis role="bold">RATE LIMIT</emphasis> (rate) -
+        <replaceable>limit</replaceable></term>
 
         <listitem>
+          <para>where <replaceable>limit</replaceable> is one of:</para>
+
+          <simplelist>
+            <member>[<emphasis
+            role="bold">-</emphasis>|[{<emphasis>s</emphasis>|<emphasis
+            role="bold">d</emphasis>}:[[<replaceable>name</replaceable>]:]]]<emphasis>rate</emphasis><emphasis
+            role="bold">/</emphasis>{<emphasis
+            role="bold">sec</emphasis>|<emphasis
+            role="bold">min</emphasis>|<emphasis
+            role="bold">hour</emphasis>|<emphasis
+            role="bold">day</emphasis>}[:<emphasis>burst</emphasis>]</member>
+
+            <member>[<replaceable>name</replaceable>1]:<emphasis>rate1</emphasis><emphasis
+            role="bold">/</emphasis>{<emphasis
+            role="bold">sec</emphasis>|<emphasis
+            role="bold">min</emphasis>|<emphasis
+            role="bold">hour</emphasis>|<emphasis
+            role="bold">day</emphasis>}[:<emphasis>burst1</emphasis>],[<replaceable>name</replaceable>2]:<emphasis>rate2</emphasis><emphasis
+            role="bold">/</emphasis>{<emphasis
+            role="bold">sec</emphasis>|<emphasis
+            role="bold">min</emphasis>|<emphasis
+            role="bold">hour</emphasis>|<emphasis
+            role="bold">day</emphasis>}[:<emphasis>burst2</emphasis>]</member>
+          </simplelist>
+
           <para>You may optionally rate-limit the rule by placing a value in
           this column:</para>
 
-          <para><emphasis>rate</emphasis> is the number of connections per
+          <para><emphasis>rate*</emphasis> is the number of connections per
           interval (<emphasis role="bold">sec</emphasis> or <emphasis
-          role="bold">min</emphasis>) and <emphasis>burst</emphasis> is the
+          role="bold">min</emphasis>) and <emphasis>burst</emphasis>* is the
           largest burst permitted. If no <emphasis>burst</emphasis> is given,
           a value of 5 is assumed. There may be no no white-space embedded in
           the specification.</para>
@@ -1242,15 +1269,28 @@
 
           <para>When <option>s:</option> or <option>d:</option> is specified,
           the rate applies per source IP address or per destination IP address
-          respectively. The <replaceable>name</replaceable> may be chosen by
-          the user and specifies a hash table to be used to count matching
+          respectively. The <replaceable>name</replaceable>s may be chosen by
+          the user and specifiy a hash table to be used to count matching
           connections. If not given, the name <emphasis
           role="bold">shorewallN</emphasis> (where N is a unique integer) is
-          assumed. Where more than one rule specifies the same name, the
-          connections counts for the rules are aggregated and the individual
-          rates apply to the aggregated count.</para>
+          assumed. Where more than one rule or POLICY specifies the same name,
+          the connections counts for the rules are aggregated and the
+          individual rates apply to the aggregated count.</para>
 
-          <para>Example: <emphasis role="bold">s:ssh:3/min:5</emphasis></para>
+          <para>Beginning with Shorewall 4.6.5, two<replaceable>
+          limit</replaceable>s may be specified, separated by a comma. In this
+          case, the first limit (<replaceable>name1</replaceable>,
+          <replaceable>rate1</replaceable>, burst1) specifies the per-source
+          IP limit and the second limit specifies the per-destination IP
+          limit.</para>
+
+          <para>Example: <emphasis
+          role="bold">client:10/sec:20,:60/sec:100</emphasis></para>
+
+          <para>In this example, the 'client' hash table will be used to
+          enforce the per-source limit and the compiler will pick a unique
+          name for the hash table that tracks the per-destination
+          limit.</para>
         </listitem>
       </varlistentry>
 

Shorewall/manpages/shorewall-tcfilters.xml

@@ -88,9 +88,11 @@
           <replaceable>address</replaceable>. DNS names are not allowed.
           Beginning with Shorewall 4.6.0, an ipset name (prefixed with '+')
           may be used if your kernel and ip6tables have the <firstterm>Basic
-          Ematch</firstterm>capability. The ipset name may optionally be
-          followed by a number or a comma separated list of src and/or dst
-          enclosed in square brackets ([...]). See <ulink
+          Ematch</firstterm> capability and you set BASIC_FILTERS=Yes in
+          <ulink url="shorewall.conf.html">shorewall.conf (5)</ulink>. The
+          ipset name may optionally be followed by a number or a comma
+          separated list of src and/or dst enclosed in square brackets
+          ([...]). See <ulink
           url="shorewall-ipsets.html">shorewall-ipsets(5)</ulink> for
           details.</para>
         </listitem>
@@ -105,9 +107,11 @@
           <replaceable>address</replaceable>. DNS names are not allowed.
           Beginning with Shorewall 4.6.0, an ipset name (prefixed with '+')
           may be used if your kernel and ip6tables have the <firstterm>Basic
-          Ematch</firstterm>capability. The ipset name may optionally be
-          followed by a number or a comma separated list of src and/or dst
-          enclosed in square brackets ([...]). See <ulink
+          Ematch</firstterm> capability and you set BASIC_FILTERS=Yes in
+          <ulink url="shorewall.conf.html">shorewall.conf (5)</ulink>. The
+          ipset name may optionally be followed by a number or a comma
+          separated list of src and/or dst enclosed in square brackets
+          ([...]). See <ulink
           url="shorewall-ipsets.html">shorewall-ipsets(5)</ulink> for
           details.</para>
 

Shorewall/manpages/shorewall-tcrules.xml

@@ -6,6 +6,8 @@
     <refentrytitle>shorewall-mangle</refentrytitle>
 
     <manvolnum>5</manvolnum>
+
+    <refmiscinfo>Configuration Files</refmiscinfo>
   </refmeta>
 
   <refnamediv>
@@ -28,10 +30,10 @@
 
     <important>
       <para>Unlike rules in the <ulink
-      url="/manpages/shorewall-rules.html">shorewall-rules</ulink>(5) file, evaluation
-      of rules in this file will continue after a match. So the final mark for
-      each packet will be the one assigned by the LAST tcrule that
-      matches.</para>
+      url="/manpages/shorewall-rules.html">shorewall-rules</ulink>(5) file,
+      evaluation of rules in this file will continue after a match. So the
+      final mark for each packet will be the one assigned by the LAST tcrule
+      that matches.</para>
 
       <para>If you use multiple internet providers with the 'track' option, in
       /etc/shorewall/providers be sure to read the restrictions at <ulink
@@ -311,8 +313,8 @@
               <para>When using Shorewall's built-in traffic shaping tool, the
               <emphasis>major</emphasis> class is the device number (the first
               device in <ulink
-              url="/manpages/shorewall-tcdevices.html">shorewall-tcdevices</ulink>(5) is
-              major class 1, the second device is major class 2, and so on)
+              url="/manpages/shorewall-tcdevices.html">shorewall-tcdevices</ulink>(5)
+              is major class 1, the second device is major class 2, and so on)
               and the <emphasis>minor</emphasis> class is the class's MARK
               value in <ulink
               url="/manpages/shorewall-tcclasses.html">shorewall-tcclasses</ulink>(5)
@@ -487,7 +489,8 @@
               [<replaceable>option</replaceable>] ...") after any matches
               specified at the end of the rule. If the target is not one known
               to Shorewall, then it must be defined as a builtin action in
-              <ulink url="/manpages/shorewall-actions.html">shorewall-actions</ulink>
+              <ulink
+              url="/manpages/shorewall-actions.html">shorewall-actions</ulink>
               (5).</para>
 
               <para>The following rules are equivalent:</para>
@@ -500,8 +503,8 @@ INLINE          eth0              -                 ; -p tcp -j MARK --set-mark
 </programlisting>
 
               <para>If INLINE_MATCHES=Yes in <ulink
-              url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink> then the
-              third rule above can be specified as follows:</para>
+              url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>
+              then the third rule above can be specified as follows:</para>
 
               <programlisting>2:P             eth0              -                 ; -p tcp</programlisting>
             </listitem>

Shorewall/manpages/shorewall.conf.xml

@@ -309,17 +309,22 @@
               <term>stoppedrules</term>
 
               <listitem>
-                <para>If ADMINISABSENTMINDED=No, a warning message is issued
-                and the setting is ignored.</para>
-
-                <para>In addition to connections matching entries in
-                <filename>stoppedrules</filename>, existing connections
-                continue to work and all new connections from the firewall
-                system itself are allowed. To sever all existing connections
-                when the firewall is stopped, install the conntrack utility
-                and place the command <command>conntrack -F</command> in the
-                stopped user exit
+                <para>All existing connections continue to work. To sever all
+                existing connections when the firewall is stopped, install the
+                conntrack utility and place the command <command>conntrack
+                -F</command> in the stopped user exit
                 (<filename>/etc/shorewall/stopped</filename>).</para>
+
+                <para>If ADMINISABSENTMINDED=No, only new connections matching
+                entries in <filename>stoppedrules</filename> are accepted when
+                Shorewall is stopped. Response packets and related connections
+                are automatically accepted.</para>
+
+                <para>If ADMINISABSENTMINDED=Yes, in addition to connections
+                matching entries in <filename>stoppedrules</filename>, all new
+                connections from the firewall system itself are allowed when
+                the firewall is stopped. Response packets and related
+                connections are automatically accepted.</para>
               </listitem>
             </varlistentry>
           </variablelist>
@@ -1306,6 +1311,45 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis
+        role="bold">LOG_BACKEND=</emphasis>[<emphasis>backend</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 4.6.4. LOG_BACKEND determines the logging
+          backend to be used for the <command>iptrace</command> command (see
+          <ulink url="manpages/shorewall.html">shorewall(8)</ulink>).</para>
+
+          <para><replaceable>backend</replaceable> is one of:</para>
+
+          <variablelist>
+            <varlistentry>
+              <term>LOG</term>
+
+              <listitem>
+                <para>Use standard kernel logging.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>ULOG</term>
+
+              <listitem>
+                <para>Use ULOG logging to ulogd.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>netlink</term>
+
+              <listitem>
+                <para>Use netlink logging to ulogd version 2 or later.</para>
+              </listitem>
+            </varlistentry>
+          </variablelist>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">LOG_MARTIANS=</emphasis>[<emphasis
         role="bold">Yes</emphasis>|<emphasis
@@ -2425,7 +2469,8 @@ INLINE          -       -       -       ; -j REJECT
 
       <varlistentry>
         <term><emphasis role="bold">SAVE_IPSETS=</emphasis>{<emphasis
-        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>
+        role="bold">Yes</emphasis>|<emphasis
+        role="bold">No|ipv4|<replaceable>setlist</replaceable></emphasis>}</term>
 
         <listitem>
           <para>Re-enabled in Shorewall 4.4.6. If SAVE_IPSETS=Yes, then the
@@ -2434,6 +2479,11 @@ INLINE          -       -       -       ; -j REJECT
           role="bold">shorewall save</emphasis> commands and restored by the
           <emphasis role="bold">shorewall start</emphasis> and <emphasis
           role="bold">shorewall restore</emphasis> commands.</para>
+
+          <para>Beginning with Shorewall 4.6.4, you can restrict the set of
+          ipsets saved by specifying a setlist (a comma-separated list of ipv4
+          ipset names). You may also restrict the saved sets to just the ipv4
+          ones by specifying <emphasis role="bold">ipv4</emphasis>.</para>
         </listitem>
       </varlistentry>
 

Shorewall/manpages/shorewall.xml

@@ -441,6 +441,8 @@
 
       <arg><option>-i</option></arg>
 
+      <arg><option>-C</option></arg>
+
       <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
 
@@ -452,11 +454,27 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>restore</option></arg>
+      <arg
+      choice="plain"><option>restore</option><arg><option>-n</option></arg><arg><option>-p</option></arg><arg><option>-C</option></arg></arg>
 
       <arg><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>run</option></arg>
+
+      <arg choice="plain"><replaceable>command</replaceable></arg>
+
+      <arg><replaceable>parameter ...</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall</command>
 
@@ -502,11 +520,26 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>save</option></arg>
+      <arg
+      choice="plain"><option>save</option><arg><option>-C</option></arg></arg>
 
       <arg choice="opt"><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="opt"><option>show | list | ls </option></arg>
+
+      <arg><option>-x</option></arg>
+
+      <arg choice="plain"><option>{bl|blacklists}</option></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall</command>
 
@@ -642,6 +675,8 @@
 
       <arg><option>-T</option><arg><option>-i</option></arg></arg>
 
+      <arg><option>-C</option></arg>
+
       <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
 
@@ -664,7 +699,8 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>status</option></arg>
+      <arg choice="plain"><arg
+      choice="plain"><option>status</option><arg><option>-i</option></arg></arg></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -738,7 +774,7 @@
     used for debugging. See <ulink
     url="/starting_and_stopping_shorewall.htm#Trace">http://www.shorewall.net/starting_and_stopping_shorewall.htm#Trace</ulink>.</para>
 
-    <para>The nolock <option>option</option> prevents the command from
+    <para>The <option>nolock</option> option prevents the command from
     attempting to acquire the Shorewall lockfile. It is useful if you need to
     include <command>shorewall</command> commands in
     <filename>/etc/shorewall/started</filename>.</para>
@@ -841,10 +877,11 @@
           and causes a Perl stack trace to be included with each
           compiler-generated error and warning message.</para>
 
-          <para>The -i option was added in Shorewall 4.6.0 and causes a
-          warning message to be issued if the line current line contains
-          alternative input specifications following a semicolon (";"). Such
-          lines will be handled incorrectly if INLINE_MATCHES is set to Yes in
+          <para>The <option>-i</option> option was added in Shorewall 4.6.0
+          and causes a warning message to be issued if the line current line
+          contains alternative input specifications following a semicolon
+          (";"). Such lines will be handled incorrectly if INLINE_MATCHES is
+          set to Yes in
           <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
         </listitem>
@@ -884,18 +921,17 @@
           compile -- -</command>) to suppress the 'Compiling...' message
           normally generated by <filename>/sbin/shorewall</filename>.</para>
 
-          <para>When -e is specified, the compilation is being performed on a
-          system other than where the compiled script will run. This option
-          disables certain configuration options that require the script to be
-          compiled where it is to be run. The use of -e requires the presence
-          of a configuration file named <filename>capabilities</filename>
-          which may be produced using the command <emphasis
-          role="bold">shorewall-lite show -f capabilities &gt;
-          capabilities</emphasis> on a system with Shorewall Lite
+          <para>When <option>-e</option> is specified, the compilation is being
+          performed on a system other than where the compiled script will run.
+          This option disables certain configuration options that require the
+          script to be compiled where it is to be run. The use of <option>-e</option>
+          requires the presence of a configuration file named <filename>capabilities</filename>
+          which may be produced using the command <command>shorewall-lite show -f
+          capabilities &gt; capabilities</command> on a system with Shorewall Lite
           installed</para>
 
-          <para>The <emphasis role="bold">-c</emphasis> option was added in
-          Shorewall 4.5.17 and causes conditional compilation of a script. The
+          <para>The <option>-c</option> option was added in Shorewall 4.5.17
+          and causes conditional compilation of a script. The
           script specified by <replaceable>pathname</replaceable> (or implied
           if <emphasis role="bold">pathname</emphasis> is omitted) is compiled
           if it doesn't exist or if there is any file in the
@@ -915,8 +951,8 @@
           and causes a Perl stack trace to be included with each
           compiler-generated error and warning message.</para>
 
-          <para>The -i option was added in Shorewall 4.6.0 and causes a
-          warning message to be issued if the line current line contains
+          <para>The <option>-i</option> option was added in Shorewall 4.6.0 and
+          causes a warning message to be issued if the line current line contains
           alternative input specifications following a semicolon (";"). Such
           lines will be handled incorrectly if INLINE_MATCHES is set to Yes in
           <ulink
@@ -985,9 +1021,10 @@
 
           <para>The <emphasis role="bold">-x</emphasis> option causes actual
           packet and byte counts to be displayed. Without that option, these
-          counts are abbreviated. The <emphasis role="bold">-m</emphasis>
-          option causes any MAC addresses included in Shorewall log messages
-          to be displayed.</para>
+          counts are abbreviated.</para>
+
+          <para>The <emphasis role="bold">-m</emphasis> option causes any MAC
+          addresses included in Shorewall log messages to be displayed.</para>
 
           <para>The <emphasis role="bold">-l</emphasis> option causes the rule
           number for each Netfilter rule to be displayed.</para>
@@ -1099,11 +1136,10 @@
           be one or more matches that may appear in both the raw table OUTPUT
           and raw table PREROUTING chains.</para>
 
-          <para>The trace records are written to the kernel's log buffer with
-          facility = kernel and priority = warning, and they are routed from
-          there by your logging daemon (syslogd, rsyslog, syslog-ng, ...) --
-          Shorewall has no control over where the messages go; consult your
-          logging daemon's documentation.</para>
+          <para>The log message destination is determined by the
+          currently-selected IPv4 <ulink
+          url="/shorewall_logging.html#Backends">logging
+          backend</ulink>.</para>
         </listitem>
       </varlistentry>
 
@@ -1153,8 +1189,8 @@
           and causes a Perl stack trace to be included with each
           compiler-generated error and warning message.</para>
 
-          <para>The -i option was added in Shorewall 4.6.0 and causes a
-          warning message to be issued if the line current line contains
+          <para>The <option>-i</option> option was added in Shorewall 4.6.0 and
+          causes a warning message to be issued if the line current line contains
           alternative input specifications following a semicolon (";"). Such
           lines will be handled incorrectly if INLINE_MATCHES is set to Yes in
           <ulink
@@ -1239,21 +1275,21 @@
           <para>The <option>-n</option> option was added in Shorewall 4.5.3
           causes Shorewall to avoid updating the routing table(s).</para>
 
-          <para>The <option>-d </option>option was added in Shorewall 4.5.3
+          <para>The <option>-d</option> option was added in Shorewall 4.5.3
           causes the compiler to run under the Perl debugger.</para>
 
           <para>The <option>-T</option> option was added in Shorewall 4.5.3
           and causes a Perl stack trace to be included with each
           compiler-generated error and warning message.</para>
 
-          <para>The -i option was added in Shorewall 4.6.0 and causes a
-          warning message to be issued if the line current line contains
+          <para>The <option>-i</option> option was added in Shorewall 4.6.0
+          and causes a warning message to be issued if the line current line contains
           alternative input specifications following a semicolon (";"). Such
           lines will be handled incorrectly if INLINE_MATCHES is set to Yes in
           <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
 
-          <para>The -<option>D</option> option was added in Shorewall 4.5.3
+          <para>The <option>-D</option> option was added in Shorewall 4.5.3
           and causes Shorewall to look in the given
           <emphasis>directory</emphasis> first for configuration files.</para>
 
@@ -1315,8 +1351,8 @@
           and causes a Perl stack trace to be included with each
           compiler-generated error and warning message.</para>
 
-          <para>The -i option was added in Shorewall 4.6.0 and causes a
-          warning message to be issued if the line current line contains
+          <para>The <option>-i</option> option was added in Shorewall 4.6.0
+          and causes a warning message to be issued if the line current line contains
           alternative input specifications following a semicolon (";"). Such
           lines will be handled incorrectly if INLINE_MATCHES is set to Yes in
           <ulink
@@ -1351,7 +1387,7 @@
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
 
-          <para>The <option>-d </option>option causes the compiler to run
+          <para>The <option>-d</option> option causes the compiler to run
           under the Perl debugger.</para>
 
           <para>The <option>-f</option> option suppresses the compilation step
@@ -1363,19 +1399,27 @@
           and performs the compilation step unconditionally, overriding the
           AUTOMAKE setting in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). When
-          both <option>-f</option> and <option>-c</option>are present, the
+          both <option>-f</option> and <option>-c</option> are present, the
           result is determined by the option that appears last.</para>
 
           <para>The <option>-T</option> option was added in Shorewall 4.5.3
           and causes a Perl stack trace to be included with each
           compiler-generated error and warning message.</para>
 
-          <para>The -i option was added in Shorewall 4.6.0 and causes a
-          warning message to be issued if the line current line contains
+          <para>The <option>-i</option> option was added in Shorewall 4.6.0
+          and causes a warning message to be issued if the line current line contains
           alternative input specifications following a semicolon (";"). Such
           lines will be handled incorrectly if INLINE_MATCHES is set to Yes in
           <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5
+          and is only meaningful when AUTOMAKE=Yes in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). If an
+          existing firewall script is used and if that script was the one that
+          generated the current running configuration, then the running
+          netfilter configuration will be reloaded as is so as to preserve the
+          iptables packet and byte counters.</para>
         </listitem>
       </varlistentry>
 
@@ -1391,6 +1435,53 @@
           <emphasis>filename</emphasis> is given then Shorewall will be
           restored from the file specified by the RESTOREFILE option in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
+
+          <caution>
+            <para>If your iptables ruleset depends on variables that are
+            detected at run-time, either in your params file or by
+            Shorewall-generated code, <command>restore</command> will use the
+            values that were current when the ruleset was saved, which may be
+            different from the current values.</para>
+          </caution>
+
+          <para>The <option>-n</option> option causes Shorewall to avoid
+          updating the routing table(s).</para>
+
+          <para>The <option>-p</option> option, added in Shorewall 4.6.5,
+          causes the connection tracking table to be flushed; the
+          <command>conntrack</command> utility must be installed to use this
+          option.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
+          If the <option>-C</option> option was specified during <emphasis
+          role="bold">shorewall save</emphasis>, then the counters saved by
+          that operation will be restored.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">run</emphasis></term>
+
+        <listitem>
+          <para>Added in Shorewall 4.6.3. Executes
+          <replaceable>command</replaceable> in the context of the generated
+          script passing the supplied <replaceable>parameter</replaceable>s.
+          Normally, the <replaceable>command</replaceable> will be a function
+          declared in <filename>lib.private</filename>.</para>
+
+          <para>Before executing the <replaceable>command</replaceable>, the
+          script will detect the configuration, setting all SW_* variables and
+          will run your <filename>init</filename> extension script with
+          $COMMAND = 'run'.</para>
+
+          <para>If there are files in the CONFIG_PATH that were modified after
+          the current firewall script was generated, the following warning
+          message is issued:</para>
+
+          <simplelist>
+            <member>WARNING: /var/lib/shorewall/firewall is not up to
+            date</member>
+          </simplelist>
         </listitem>
       </varlistentry>
 
@@ -1453,6 +1544,10 @@
           <emphasis>filename</emphasis> is not given then the state is saved
           in the file specified by the RESTOREFILE option in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
+
+          <para>The <option>-C</option> option, added in Shorewall 4.6.5,
+          causes the iptables packet and byte counters to be saved along with
+          the chains and rules.</para>
         </listitem>
       </varlistentry>
 
@@ -1473,6 +1568,19 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis role="bold">bl|blacklists</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 4.6.2. Displays the dynamic chain
+                along with any chains produced by entries in
+                shorewall-blrules(5). The <emphasis role="bold">-x</emphasis>
+                option is passed directly through to iptables and causes
+                actual packet and byte counts to be displayed. Without this
+                option, those counts are abbreviated.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">capabilities</emphasis></term>
 
@@ -1632,7 +1740,7 @@
 
               <listitem>
                 <para>Displays the Netfilter nat table using the command
-                <emphasis role="bold">iptables -t nat -L -n -v</emphasis>.The
+                <emphasis role="bold">iptables -t nat -L -n -v</emphasis>. The
                 <emphasis role="bold">-x</emphasis> option is passed directly
                 through to iptables and causes actual packet and byte counts
                 to be displayed. Without this option, those counts are
@@ -1665,7 +1773,7 @@
 
               <listitem>
                 <para>Displays the Netfilter raw table using the command
-                <emphasis role="bold">iptables -t raw -L -n -v</emphasis>.The
+                <emphasis role="bold">iptables -t raw -L -n -v</emphasis>. The
                 <emphasis role="bold">-x</emphasis> option is passed directly
                 through to iptables and causes actual packet and byte counts
                 to be displayed. Without this option, those counts are
@@ -1744,6 +1852,13 @@
           lines will be handled incorrectly if INLINE_MATCHES is set to Yes in
           <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5
+          and is only meaningful when the <option>-f</option> option is also
+          specified. If the previously-saved configuration is restored, and if
+          the <option>-C</option> option was also specified in the <emphasis
+          role="bold">save</emphasis> command, then the packet and byte
+          counters will be restored.</para>
         </listitem>
       </varlistentry>
 
@@ -1775,6 +1890,10 @@
         <listitem>
           <para>Produces a short report about the state of the
           Shorewall-configured firewall.</para>
+
+          <para>The <option>-i </option>option was added in Shorewall 4.6.2
+          and causes the status of each optional or provider interface to be
+          displayed.</para>
         </listitem>
       </varlistentry>
 

Shorewall/modules.essential

@@ -28,4 +28,3 @@ loadmodule iptable_nat
 loadmodule iptable_raw
 loadmodule xt_state
 loadmodule xt_tcpudp
-loadmodule ipt_LOG

Shorewall/modules.extensions

@@ -32,7 +32,6 @@ loadmodule ipt_ipp2p
 loadmodule ipt_iprange
 loadmodule ipt_length
 loadmodule ipt_limit
-loadmodule ipt_LOG
 loadmodule ipt_mac
 loadmodule ipt_mark
 loadmodule ipt_MARK
@@ -58,4 +57,3 @@ loadmodule ipt_tos
 loadmodule ipt_TOS
 loadmodule ipt_ttl
 loadmodule ipt_TTL
-loadmodule ipt_ULOG

Shorewall/modules.xtables

@@ -31,7 +31,6 @@ loadmodule xt_mac
 loadmodule xt_mark
 loadmodule xt_MARK
 loadmodule xt_multiport
-loadmodule xt_NFLOG
 loadmodule xt_NFQUEUE
 loadmodule xt_owner
 loadmodule xt_physdev

Shorewall/shorewall.service

@@ -1,20 +1,20 @@
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.4
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
 #
-#     Copyright 2011 Jonathan Underwood (jonathan.underwood@gmail.com)
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
 Description=Shorewall IPv4 firewall
-After=syslog.target
 After=network.target
+Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall
 StandardOutput=syslog
-ExecStart=/sbin/shorewall $OPTIONS start
+ExecStart=/sbin/shorewall $OPTIONS start $STARTOPTIONS
 ExecStop=/sbin/shorewall $OPTIONS stop
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=basic.target

Shorewall/shorewall.service.214

@@ -0,0 +1,20 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#
+[Unit]
+Description=Shorewall IPv4 firewall
+After=network-online.target
+Conflicts=iptables.service firewalld.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/sysconfig/shorewall
+StandardOutput=syslog
+ExecStart=/sbin/shorewall $OPTIONS start $STARTOPTIONS
+ExecStop=/sbin/shorewall $OPTIONS stop
+
+[Install]
+WantedBy=basic.target

Shorewall/uninstall.sh

@@ -27,11 +27,16 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx #The Build script inserts the actual version
+PRODUCT=shorewall
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <shorewallrc file> ]"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
     exit $1
 }
 
@@ -69,6 +74,43 @@ remove_file() # $1 = file to restore
     fi
 }
 
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
+
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
 	. ./shorewallrc
@@ -110,24 +152,39 @@ fi
 
 echo "Uninstalling shorewall $VERSION"
 
-if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall-lite ]; then
-   shorewall clear
+[ -n "$SANDBOX" ] && configure=0
+
+if [ $configure -eq 1 ]; then
+    if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall-lite ]; then
+	shorewall clear
+    fi
 fi
 
 rm -f ${SBINDIR}/shorewall
 
-if [ -f "$INITSCRIPT" ]; then
-    if mywhich updaterc.d ; then
-	updaterc.d ${PRODUCT} remove
-    elif mywhich insserv ; then
-        insserv -r $INITSCRIPT
-    elif mywhich chkconfig ; then
-	chkconfig --del $(basename $INITSCRIPT)
-    elif mywhich systemctl ; then
-	systemctl disable ${PRODUCT}
+if [ -L ${SHAREDIR}/shorewall6/init ]; then
+    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall6/init)
+elif [ -n "$INITFILE" ]; then
+    FIREWALL=${INITDIR}/${INITFILE}
+fi
+
+if [ -f "$FIREWALL" ]; then
+    if [ $configure -eq 1 ]; then
+	if mywhich updaterc.d ; then
+	    updaterc.d ${PRODUCT} remove
+	elif mywhich insserv ; then
+            insserv -r $FIREWALL
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $FIREWALL)
+	fi
     fi
 
-    remove_file $INITSCRIPT
+    remove_file $FIREWALL
+fi
+
+if [ -n "$SYSTEMD" ]; then
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
+    rm -f $SYSTEMD/shorewall.service
 fi
 
 rm -rf ${SHAREDIR}/shorewall/version
@@ -139,8 +196,8 @@ if [ -n "$SYSCONFDIR" ]; then
 fi
 
 rm -rf ${VARDIR}/shorewall
-rm -rf ${PERLLIB}/Shorewall/*
-rm -rf ${LIBEXEC}/shorewall
+rm -rf ${PERLLIBDIR}/Shorewall/*
+rm -rf ${LIBEXECDIR}/shorewall
 rm -rf ${SHAREDIR}/shorewall/configfiles/
 rm -rf ${SHAREDIR}/shorewall/Samples/
 rm -rf ${SHAREDIR}/shorewall/Shorewall/

Shorewall6-lite/init.fedora.sh

@@ -39,7 +39,7 @@ fi
 
 start() {
     echo -n $"Starting Shorewall: "
-    $shorewall $OPTIONS start 2>&1 | $logger
+    $shorewall $OPTIONS start $STARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile
@@ -69,7 +69,7 @@ restart() {
 # Note that we don't simply stop and start since shorewall has a built in
 # restart which stops the firewall if running and then starts it.
     echo -n $"Restarting Shorewall: "
-    $shorewall $OPTIONS restart 2>&1 | $logger
+    $shorewall $OPTIONS restart $RESTARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile

Shorewall6-lite/manpages/shorewall6-lite.xml

@@ -301,6 +301,8 @@
 
       <arg><option>-p</option></arg>
 
+      <arg><option>-C</option></arg>
+
       <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
 
@@ -314,9 +316,26 @@
 
       <arg choice="plain"><option>restore</option></arg>
 
+      <arg><option>-C</option></arg>
+
       <arg><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall6-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>run</option></arg>
+
+      <arg choice="plain">command</arg>
+
+      <arg><replaceable>parameter ...</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall6-lite</command>
 
@@ -327,6 +346,8 @@
 
       <arg choice="plain"><option>save</option></arg>
 
+      <arg><option>-C</option></arg>
+
       <arg choice="opt"><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
@@ -366,6 +387,20 @@
       <arg choice="plain"><option>capabilities</option></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall6-lite</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="opt"><option>show | list | ls </option></arg>
+
+      <arg><option>-x</option></arg>
+
+      <arg choice="plain"><option>{bl|blacklists}</option></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall6-lite</command>
 
@@ -445,6 +480,10 @@
       <arg><option>-n</option></arg>
 
       <arg><option>-p</option></arg>
+
+      <arg><option>-f</option></arg>
+
+      <arg><option>-C</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -465,7 +504,8 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>status</option></arg>
+      <arg choice="plain"><arg
+      choice="plain"><option>status</option><arg><option>-i</option></arg></arg></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -494,10 +534,11 @@
     used for debugging. See <ulink
     url="http://www.shorewall.net/starting_and_stopping_shorewall.htm#Trace">http://www.shorewall.net/starting_and_stopping_shorewall.htm#Trace</ulink>.</para>
 
-    <para>The nolock <option>option</option> prevents the command from
+    <para>The <option>nolock</option> option prevents the command from
     attempting to acquire the shorewall6-lite lockfile. It is useful if you
-    need to include <command>shorewall</command> commands in
-    <filename>/etc/shorewall/started</filename>.</para>
+    need to include <command>shorewall</command> commands in the
+    <filename>started</filename> <ulink
+    url="../shorewall_extension_scripts.html">extension script</ulink>.</para>
 
     <para>The <emphasis>options</emphasis> control the amount of output that
     the command produces. They consist of a sequence of the letters <emphasis
@@ -508,8 +549,8 @@
     role="bold">v</emphasis> adds one to the effective verbosity and each
     <emphasis role="bold">q</emphasis> subtracts one from the effective
     VERBOSITY. Alternately, <emphasis role="bold">v</emphasis> may be followed
-    immediately with one of -1,0,1,2 to specify a specify VERBOSITY. There may
-    be no white-space between <emphasis role="bold">v</emphasis> and the
+    immediately with one of -1,0,1,2 to specify VERBOSITY. There may be no
+    white-space between <emphasis role="bold">v</emphasis> and the
     VERBOSITY.</para>
 
     <para>The <emphasis>options</emphasis> may also include the letter
@@ -530,19 +571,21 @@
           <para>Adds a list of hosts or subnets to a dynamic zone usually used
           with VPN's.</para>
 
-          <para>The <emphasis>interface</emphasis> argument names an interface
-          defined in the <ulink
+          <para>The <replaceable>interface</replaceable> argument names an
+          interface defined in the <ulink
           url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
-          file. A <emphasis>host-list</emphasis> is comma-separated list whose
-          elements are host or network addresses.<caution>
-              <para>The <command>add</command> command is not very robust. If
-              there are errors in the <replaceable>host-list</replaceable>,
-              you may see a large number of error messages yet a subsequent
-              <command>shorewall6-lite show zones</command> command will
-              indicate that all hosts were added. If this happens, replace
-              <command>add</command> by <command>delete</command> and run the
-              same command again. Then enter the correct command.</para>
-            </caution></para>
+          file. A <replaceable>host-list</replaceable> is comma-separated list
+          whose elements are host or network addresses.</para>
+
+          <caution>
+            <para>The <command>add</command> command is not very robust. If
+            there are errors in the <replaceable>host-list</replaceable>, you
+            may see a large number of error messages yet a subsequent
+            <command>shorewall6-lite show zones</command> command will
+            indicate that all hosts were added. If this happens, replace
+            <command>add</command> by <command>delete</command> and run the
+            same command again. Then enter the correct command.</para>
+          </caution>
         </listitem>
       </varlistentry>
 
@@ -551,10 +594,9 @@
 
         <listitem>
           <para>Re-enables receipt of packets from hosts previously
-          blacklisted by a <emphasis role="bold">drop</emphasis>, <emphasis
-          role="bold">logdrop</emphasis>, <emphasis
-          role="bold">reject</emphasis>, or <emphasis
-          role="bold">logreject</emphasis> command.</para>
+          blacklisted by a <command>drop</command>,
+          <command>logdrop</command>, <command>reject</command>, or
+          <command>logreject</command> command.</para>
         </listitem>
       </varlistentry>
 
@@ -568,10 +610,9 @@
           the firewall is causing connection problems.</para>
 
           <para>If <option>-f</option> is given, the command will be processed
-          by the compiled script that executed the last successful <emphasis
-          role="bold">start</emphasis>, <emphasis
-          role="bold">restart</emphasis> or <emphasis
-          role="bold">refresh</emphasis> command if that script exists.</para>
+          by the compiled script that executed the last successful
+          <command>start</command>, <command>restart</command> or
+          <command>refresh</command> command if that script exists.</para>
         </listitem>
       </varlistentry>
 
@@ -579,14 +620,14 @@
         <term><emphasis role="bold">delete</emphasis></term>
 
         <listitem>
-          <para>The delete command reverses the effect of an earlier <emphasis
-          role="bold">add</emphasis> command.</para>
+          <para>The delete command reverses the effect of an earlier
+          <command>add</command> command.</para>
 
-          <para>The <emphasis>interface</emphasis> argument names an interface
-          defined in the <ulink
+          <para>The <replaceable>interface</replaceable> argument names an
+          interface defined in the <ulink
           url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
-          file. A <emphasis>host-list</emphasis> is comma-separated list whose
-          elements are a host or network address.</para>
+          file. A <replaceable>host-list</replaceable> is comma-separated list
+          whose elements are a host or network address.</para>
         </listitem>
       </varlistentry>
 
@@ -606,8 +647,8 @@
         <term><emphasis role="bold">drop</emphasis></term>
 
         <listitem>
-          <para>Causes traffic from the listed <emphasis>address</emphasis>es
-          to be silently dropped.</para>
+          <para>Causes traffic from the listed
+          <replaceable>address</replaceable>es to be silently dropped.</para>
         </listitem>
       </varlistentry>
 
@@ -618,14 +659,15 @@
           <para>Produces a verbose report about the firewall configuration for
           the purpose of problem analysis.</para>
 
-          <para>The <emphasis role="bold">-x</emphasis> option causes actual
-          packet and byte counts to be displayed. Without that option, these
-          counts are abbreviated. The <emphasis role="bold">-m</emphasis>
-          option causes any MAC addresses included in shorewall6-lite log
-          messages to be displayed.</para>
+          <para>The <option>-x</option> option causes actual packet and byte
+          counts to be displayed. Without that option, these counts are
+          abbreviated.</para>
 
-          <para>The <emphasis role="bold">-l</emphasis> option causes the rule
-          number for each Netfilter rule to be displayed.</para>
+          <para>The <option>-m</option> option causes any MAC addresses
+          included in shorewall6-lite log messages to be displayed.</para>
+
+          <para>The <option>-l</option> option causes the rule number for each
+          Netfilter rule to be displayed.</para>
         </listitem>
       </varlistentry>
 
@@ -645,10 +687,11 @@
         <term><emphasis role="bold">forget</emphasis></term>
 
         <listitem>
-          <para>Deletes /var/lib/shorewall6-lite/<emphasis>filename</emphasis>
-          and /var/lib/shorewall6-lite/save. If no
-          <emphasis>filename</emphasis> is given then the file specified by
-          RESTOREFILE in <ulink
+          <para>Deletes
+          <filename>/var/lib/shorewall6-lite/<replaceable>filename</replaceable></filename>
+          and <filename>/var/lib/shorewall6-lite/save</filename>. If no
+          <replaceable>filename</replaceable> is given then the file specified
+          by RESTOREFILE in <ulink
           url="shorewall.conf.html">shorewall6.conf</ulink>(5) is
           assumed.</para>
         </listitem>
@@ -714,10 +757,11 @@
         <term><emphasis role="bold">logdrop</emphasis></term>
 
         <listitem>
-          <para>Causes traffic from the listed <emphasis>address</emphasis>es
-          to be logged then discarded. Logging occurs at the log level
-          specified by the BLACKLIST_LOGLEVEL setting in <ulink
-          url="shorewall.conf.html">shorewall6.conf</ulink> (5).</para>
+          <para>Causes traffic from the listed
+          <replaceable>address</replaceable>es to be logged then discarded.
+          Logging occurs at the log level specified by the BLACKLIST_LOGLEVEL
+          setting in <ulink url="shorewall.conf.html">shorewall6.conf</ulink>
+          (5).</para>
         </listitem>
       </varlistentry>
 
@@ -728,15 +772,18 @@
           <para>Monitors the log file specified by the LOGFILE option in
           <ulink url="shorewall.conf.html">shorewall6.conf</ulink>(5) and
           produces an audible alarm when new shorewall6-lite messages are
-          logged. The <emphasis role="bold">-m</emphasis> option causes the
-          MAC address of each packet source to be displayed if that
-          information is available. The
-          <replaceable>refresh-interval</replaceable> specifies the time in
-          seconds between screen refreshes. You can enter a negative number by
-          preceding the number with "--" (e.g., <command>shorewall6-lite
-          logwatch -- -30</command>). In this case, when a packet count
-          changes, you will be prompted to hit any key to resume screen
-          refreshes.</para>
+          logged.</para>
+
+          <para>The <option>-m</option> option causes the MAC address of each
+          packet source to be displayed if that information is
+          available.</para>
+
+          <para>The <replaceable>refresh-interval</replaceable> specifies the
+          time in seconds between screen refreshes. You can enter a negative
+          number by preceding the number with "--" (e.g.,
+          <command>shorewall6-lite logwatch -- -30</command>). In this case,
+          when a packet count changes, you will be prompted to hit any key to
+          resume screen refreshes.</para>
         </listitem>
       </varlistentry>
 
@@ -744,10 +791,11 @@
         <term><emphasis role="bold">logreject</emphasis></term>
 
         <listitem>
-          <para>Causes traffic from the listed <emphasis>address</emphasis>es
-          to be logged then rejected. Logging occurs at the log level
-          specified by the BLACKLIST_LOGLEVEL setting in <ulink
-          url="shorewall.conf.html">shorewall6.conf</ulink> (5).</para>
+          <para>Causes traffic from the listed
+          <replaceable>address</replaceable>es to be logged then rejected.
+          Logging occurs at the log level specified by the BLACKLIST_LOGLEVEL
+          setting in <ulink url="shorewall.conf.html">shorewall6.conf</ulink>
+          (5).</para>
         </listitem>
       </varlistentry>
 
@@ -777,9 +825,17 @@
         <term><emphasis role="bold">restart</emphasis></term>
 
         <listitem>
-          <para>Restart is similar to <emphasis role="bold">shorewall6-lite
-          start</emphasis> except that it assumes that the firewall is already
-          started. Existing connections are maintained.</para>
+          <para>Restart is similar to <command>shorewall6-lite start</command>
+          except that it assumes that the firewall is already started.
+          Existing connections are maintained.</para>
+
+          <caution>
+            <para>If your ip6tables ruleset depends on variables that are
+            detected at run-time, either in your params file or by
+            Shorewall-generated code, <command>restore</command> will use the
+            values that were current when the ruleset was saved, which may be
+            different from the current values.</para>
+          </caution>
 
           <para>The <option>-n</option> option causes shorewall6-lite to avoid
           updating the routing table(s).</para>
@@ -787,6 +843,12 @@
           <para>The <option>-p</option> option causes the connection tracking
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
+          If the specified (or implicit) firewall script is the one that
+          generated the current running configuration, then the running
+          netfilter configuration will be reloaded as is so as to preserve the
+          iptables packet and byte counters.</para>
         </listitem>
       </varlistentry>
 
@@ -794,14 +856,38 @@
         <term><emphasis role="bold">restore</emphasis></term>
 
         <listitem>
-          <para>Restore shorewall6-lite to a state saved using the <emphasis
-          role="bold">shorewall6-lite save</emphasis> command. Existing
-          connections are maintained. The <emphasis>filename</emphasis> names
-          a restore file in /var/lib/shorewall6-lite created using <emphasis
-          role="bold">shorewall6-lite save</emphasis>; if no
-          <emphasis>filename</emphasis> is given then shorewall6-lite will be
-          restored from the file specified by the RESTOREFILE option in <ulink
+          <para>Restore shorewall6-lite to a state saved using the
+          <command>shorewall6-lite save</command> command. Existing
+          connections are maintained. The <replaceable>filename</replaceable>
+          names a restore file in <filename
+          class="directory">/var/lib/shorewall6-lite</filename> created using
+          <command>shorewall6-lite save</command>; if no
+          <replaceable>filename</replaceable> is given then shorewall6-lite
+          will be restored from the file specified by the RESTOREFILE option
+          in <ulink
           url="shorewall.conf.html">shorewall6.conf</ulink>(5).</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
+          If the <option>-C</option> option was specified during
+          <command>shorewall7-lite save</command>, then the counters saved by
+          that operation will be restored.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">run</emphasis></term>
+
+        <listitem>
+          <para>Added in Shorewall 4.6.3. Executes
+          <replaceable>command</replaceable> in the context of the generated
+          script passing the supplied <replaceable>parameter</replaceable>s.
+          Normally, the <replaceable>command</replaceable> will be a function
+          declared in <filename>lib.private</filename>.</para>
+
+          <para>Before executing the command, the script will detect the
+          configuration, setting all SW_* variables and will run your
+          <filename>init</filename> extension script with $COMMAND =
+          'run'.</para>
         </listitem>
       </varlistentry>
 
@@ -810,12 +896,17 @@
 
         <listitem>
           <para>The dynamic blacklist is stored in
-          /var/lib/shorewall6-lite/save. The state of the firewall is stored
-          in /var/lib/shorewall6-lite/<emphasis>filename</emphasis> for use by
-          the <emphasis role="bold">shorewall6-lite restore</emphasis>. If
-          <emphasis>filename</emphasis> is not given then the state is saved
-          in the file specified by the RESTOREFILE option in <ulink
+          <filename>/var/lib/shorewall6-lite/save</filename>. The state of the
+          firewall is stored in
+          <filename>/var/lib/shorewall6-lite/<replaceable>filename</replaceable></filename>
+          for use by the <command>shorewall6-lite restore</command> command.
+          If <replaceable>filename</replaceable> is not given then the state
+          is saved in the file specified by the RESTOREFILE option in <ulink
           url="shorewall.conf.html">shorewall6.conf</ulink>(5).</para>
+
+          <para>The <option>-C</option> option, added in Shorewall 4.6.5,
+          causes the ip6tables packet and byte counters to be saved along with
+          the chains and rules.</para>
         </listitem>
       </varlistentry>
 
@@ -827,14 +918,27 @@
           arguments:</para>
 
           <variablelist>
+            <varlistentry>
+              <term><emphasis role="bold">bl|blacklists</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 4.6.2. Displays the dynamic chain
+                along with any chains produced by entries in
+                shorewall6-blrules(5).The <option>-x</option> option is passed
+                directly through to ip6tables and causes actual packet and
+                byte counts to be displayed. Without this option, those counts
+                are abbreviated.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">capabilities</emphasis></term>
 
               <listitem>
                 <para>Displays your kernel/iptables capabilities. The
-                <emphasis role="bold">-f</emphasis> option causes the display
-                to be formatted as a capabilities file for use with <emphasis
-                role="bold">compile -e</emphasis>.</para>
+                <option>-f</option> option causes the display to be formatted
+                as a capabilities file for use with <command>compile
+                -e</command>.</para>
               </listitem>
             </varlistentry>
 
@@ -848,25 +952,26 @@
                 -L</emphasis> <emphasis>chain</emphasis> <emphasis
                 role="bold">-n -v</emphasis> command. If no
                 <emphasis>chain</emphasis> is given, all of the chains in the
-                filter table are displayed. The <emphasis
-                role="bold">-x</emphasis> option is passed directly through to
-                iptables and causes actual packet and byte counts to be
-                displayed. Without this option, those counts are abbreviated.
-                The <emphasis role="bold">-t</emphasis> option specifies the
-                Netfilter table to display. The default is <emphasis
+                filter table are displayed.</para>
+
+                <para>The <option>-x</option> option is passed directly
+                through to iptables and causes actual packet and byte counts
+                to be displayed. Without this option, those counts are
+                abbreviated.</para>
+
+                <para>The <option>-t</option> option specifies the Netfilter
+                table to display. The default is <emphasis
                 role="bold">filter</emphasis>.</para>
 
-                <para>The <emphasis role="bold">-b</emphasis> ('brief') option
-                causes rules which have not been used (i.e. which have zero
-                packet and byte counts) to be omitted from the output. Chains
-                with no rules displayed are also omitted from the
-                output.</para>
+                <para>The <option>-b</option> ('brief') option causes rules
+                which have not been used (i.e. which have zero packet and byte
+                counts) to be omitted from the output. Chains with no rules
+                displayed are also omitted from the output.</para>
 
-                <para>The <emphasis role="bold">-l</emphasis> option causes
-                the rule number for each Netfilter rule to be
-                displayed.</para>
+                <para>The <option>-l</option> option causes the rule number
+                for each Netfilter rule to be displayed.</para>
 
-                <para>If the <emphasis role="bold">t</emphasis> option and the
+                <para>If the <option>-t</option> option and the
                 <option>chain</option> keyword are both omitted and any of the
                 listed <replaceable>chain</replaceable>s do not exist, a usage
                 message is displayed.</para>
@@ -944,10 +1049,11 @@
               <listitem>
                 <para>Displays the last 20 shorewall6-lite messages from the
                 log file specified by the LOGFILE option in <ulink
-                url="shorewall.conf.html">shorewall6.conf</ulink>(5). The
-                <emphasis role="bold">-m</emphasis> option causes the MAC
-                address of each packet source to be displayed if that
-                information is available.</para>
+                url="shorewall.conf.html">shorewall6.conf</ulink>(5).</para>
+
+                <para>The <option>-m</option> option causes the MAC address of
+                each packet source to be displayed if that information is
+                available.</para>
               </listitem>
             </varlistentry>
 
@@ -966,10 +1072,10 @@
 
               <listitem>
                 <para>Displays the Netfilter nat table using the command
-                <emphasis role="bold">iptables -t nat -L -n -v</emphasis>.The
-                <emphasis role="bold">-x</emphasis> option is passed directly
-                through to iptables and causes actual packet and byte counts
-                to be displayed. Without this option, those counts are
+                <command>iptables -t nat -L -n -v</command>.The
+                <option>-x</option> option is passed directly through to
+                iptables and causes actual packet and byte counts to be
+                displayed. Without this option, those counts are
                 abbreviated.</para>
               </listitem>
             </varlistentry>
@@ -999,10 +1105,10 @@
 
               <listitem>
                 <para>Displays the Netfilter raw table using the command
-                <emphasis role="bold">iptables -t raw -L -n -v</emphasis>.The
-                <emphasis role="bold">-x</emphasis> option is passed directly
-                through to iptables and causes actual packet and byte counts
-                to be displayed. Without this option, those counts are
+                <command>iptables -t raw -L -n -v</command>.The
+                <option>-x</option> option is passed directly through to
+                iptables and causes actual packet and byte counts to be
+                displayed. Without this option, those counts are
                 abbreviated.</para>
               </listitem>
             </varlistentry>
@@ -1032,7 +1138,7 @@
         <term><emphasis role="bold">start</emphasis></term>
 
         <listitem>
-          <para>Start Shorewall Lite. Existing connections through
+          <para>Start Shorewall6 Lite. Existing connections through
           shorewall6-lite managed interfaces are untouched. New connections
           will be allowed only if they are allowed by the firewall rules or
           policies.</para>
@@ -1040,6 +1146,22 @@
           <para>The <option>-p</option> option causes the connection tracking
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
+
+          <para>The <option>-m</option> option prevents the firewall script
+          from modifying the current routing configuration.</para>
+
+          <para>The <option>-f</option> option was added in Shorewall 4.6.5.
+          If the RESTOREFILE named in <ulink
+          url="shorewall.conf.html">shorewall.conf</ulink>(5) exists, is
+          executable and is not older than the current filewall script, then
+          that saved configuration is restored.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5
+          and is only meaningful when the <option>-f</option> option is also
+          specified. If the previously-saved configuration is restored, and if
+          the <option>-C</option> option was also specified in the
+          <command>save</command> command, then the packet and byte counters
+          will be restored.</para>
         </listitem>
       </varlistentry>
 
@@ -1058,10 +1180,9 @@
           or by ADMINISABSENTMINDED.</para>
 
           <para>If <option>-f</option> is given, the command will be processed
-          by the compiled script that executed the last successful <emphasis
-          role="bold">start</emphasis>, <emphasis
-          role="bold">restart</emphasis> or <emphasis
-          role="bold">refresh</emphasis> command if that script exists.</para>
+          by the compiled script that executed the last successful
+          <command>start</command>, <command>restart</command> or
+          <command>refresh</command> command if that script exists.</para>
         </listitem>
       </varlistentry>
 
@@ -1071,6 +1192,10 @@
         <listitem>
           <para>Produces a short report about the state of the
           Shorewall-configured firewall.</para>
+
+          <para>The <option>-i</option> option was added in Shorewall 4.6.2
+          and causes the status of each optional or provider interface to be
+          displayed.</para>
         </listitem>
       </varlistentry>
 

Shorewall6-lite/shorewall6-lite.service

@@ -1,20 +1,20 @@
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.4
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
 #
-#     Copyright 2011 Jonathan Underwood (jonathan.underwood@gmail.com)
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
 Description=Shorewall IPv6 firewall (lite)
-After=syslog.target
 After=network.target
+Conflicts=ip6tables.service firewalld.service
 
 [Service]
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall6-lite
 StandardOutput=syslog
-ExecStart=/sbin/shorewall6-lite $OPTIONS start
+ExecStart=/sbin/shorewall6-lite $OPTIONS start $STARTOPTIONS
 ExecStop=/sbin/shorewall6-lite $OPTIONS stop
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=basic.target