Support the DROP command in the mangle file

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/INSTALL

@@ -1,4 +1,4 @@
-Shoreline Firewall (Shorewall) Version 4
+Shoreline Firewall (Shorewall) Version 5
 -----         ----
 
 -----------------------------------------------------------------------------

Shorewall-core/configure

@@ -28,7 +28,7 @@
 #
 # Build updates this
 #
-VERSION=4.5.2.1
+VERSION=4.6.12
 
 case "$BASH_VERSION" in
     [4-9].*)
@@ -91,6 +91,8 @@ for p in $@; do
     fi
 done
 
+cd $(dirname $0)
+
 vendor=${params[HOST]}
 
 if [ -z "$vendor" ]; then
@@ -122,7 +124,6 @@ if [ -z "$vendor" ]; then
 	    params[HOST]=apple
 	    rcfile=shorewallrc.apple
 	    ;;
-
 	cygwin*|CYGWIN*)
 	    params[HOST]=cygwin
 	    rcfile=shorewallrc.cygwin
@@ -130,7 +131,7 @@ if [ -z "$vendor" ]; then
 	*)
 	    if [ -f /etc/debian_version ]; then
 		params[HOST]=debian
-		rcfile=shorewallrc.debian
+		ls -l /sbin/init | fgrep -q systemd &&  rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
 	    elif [ -f /etc/redhat-release ]; then
 		params[HOST]=redhat
 		rcfile=shorewallrc.redhat
@@ -143,28 +144,41 @@ if [ -z "$vendor" ]; then
 	    elif [ -f /etc/arch-release ] ; then
 		params[HOST]=archlinux
 		rcfile=shorewallrc.archlinux
+	    elif [ -f /etc/openwrt_release ]; then
+		params[HOST]=openwrt
+		rcfile=shorewallrc.openwrt
 	    else
 		params[HOST]=linux
 		rcfile=shorewallrc.default
 	    fi
 	    ;;
     esac
-
     vendor=${params[HOST]}
-elif [ $vendor = linux ]; then
-    rcfile=shorewallrc.default;
 else
-    rcfile=shorewallrc.$vendor
+    if [ $vendor = linux ]; then
+	rcfile=shorewallrc.default;
+    elif [ $vendor = debian -a -f /etc/debian_version ]; then
+	ls -l /sbin/init | fgrep -q systemd && rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
+    else
+	rcfile=shorewallrc.$vendor
+    fi
+
     if [ ! -f $rcfile ]; then
 	echo "ERROR: $vendor is not a recognized host type" >&2
 	exit 1
+    elif [ $vendor = default ]; then
+	params[HOST]=linux
+	vendor=linux
+    elif [[ $vendor == debian.* ]]; then
+	params[HOST]=debian
+	vendor=debian
     fi
 fi
 
 if [ $vendor = linux ]; then
     echo "INFO: Creating a generic Linux installation - " `date`;
 else
-    echo "INFO: Creating a ${vendor}-specific installation - " `date`;
+    echo "INFO: Creating a ${params[HOST]}-specific installation - " `date`;
 fi
 
 echo
@@ -177,6 +191,7 @@ done
 
 echo '#'                                                                 > shorewallrc
 echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
+echo "# rc file: $rcfile"                                               >> shorewallrc
 echo '#'                                                                >> shorewallrc
 
 if [ $# -gt 0 ]; then

Shorewall-core/configure.pl

@@ -31,7 +31,7 @@ use strict;
 # Build updates this
 #
 use constant {
-    VERSION => '4.5.2.1'
+    VERSION => '4.6.12'
 };
 
 my %params;
@@ -52,6 +52,9 @@ for ( @ARGV ) {
     $params{$pn} = $pv;
 }
 
+use File::Basename;
+chdir dirname($0);
+
 my $vendor = $params{HOST};
 my $rcfile;
 my $rcfilename;
@@ -68,23 +71,52 @@ unless ( defined $vendor ) {
 	    $vendor = 'redhat';
 	} elsif ( $id eq 'opensuse' ) {
 	    $vendor = 'suse';
-	} elsif ( $id eq 'ubuntu' ) {
-	    $vendor = 'debian';
+	} elsif ( $id eq 'ubuntu' || $id eq 'debian' ) {
+	    my $init = `ls -l /sbin/init`;
+	    $vendor = $init =~ /systemd/ ? 'debian.systemd' : 'debian.sysvinit';
 	} else {
 	    $vendor = $id;
 	}
     }
 
     $params{HOST} = $vendor;
+    $params{HOST} =~ s/\..*//;
 }
 
 if ( defined $vendor ) {
-    $rcfilename = $vendor eq 'linux' ? 'shorewallrc.default' : 'shorewallrc.' . $vendor;
-    die qq("ERROR: $vendor" is not a recognized host type) unless -f $rcfilename;
+    if ( $vendor eq 'debian' && -f '/etc/debian_version' ) {
+	if ( -l '/sbin/init' ) {
+	    if ( readlink('/sbin/init') =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
+	    } else {
+		$rcfilename = 'shorewallrc.debian.sysvinit';
+	    }
+	} else {
+	    $rcfilename = 'shorewallrc.debian.sysvinit';
+	}
+    } else {
+	$rcfilename = $vendor eq 'linux' ? 'shorewallrc.default' : 'shorewallrc.' . $vendor;
+    }
+
+    unless ( -f $rcfilename ) {
+	die qq("ERROR: $vendor" is not a recognized host type);
+    } elsif ( $vendor eq 'default' ) {
+	$params{HOST} = $vendor = 'linux';
+    } elsif ( $vendor =~ /^debian\./ ) {
+	$params{HOST} = $vendor = 'debian';
+    }
 } else {
     if ( -f '/etc/debian_version' ) {
 	$vendor = 'debian';
-	$rcfilename = 'shorewallrc.debian';
+	if ( -l '/sbin/init' ) {
+	    if ( readlink( '/sbin/init' ) =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
+	    } else {
+		$rcfilename = 'shorewallrc.debian.sysvinit';
+	    }
+	} else {
+	    $rcfilename = 'shorewallrc.debian.sysvinit';
+	}
     } elsif ( -f '/etc/redhat-release' ){
 	$vendor = 'redhat';
 	$rcfilename = 'shorewallrc.redhat';
@@ -117,7 +149,7 @@ my @abbr = qw( Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec );
 if ( $vendor eq 'linux' ) {
     printf "INFO: Creating a generic Linux installation - %s %2d %04d %02d:%02d:%02d\n\n", $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
 } else {
-    printf "INFO: Creating a %s-specific installation - %s %2d %04d %02d:%02d:%02d\n\n", $vendor, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
+    printf "INFO: Creating a %s-specific installation - %s %2d %04d %02d:%02d:%02d\n\n", $params{HOST}, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
 }
 
 open $rcfile, '<', $rcfilename or die "Unable to open $rcfilename for input: $!";
@@ -141,7 +173,8 @@ my $outfile;
 
 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
 
-printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n#\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+print $outfile "# rc file: $rcfilename\n#\n";
 
 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;
 

Shorewall-core/install.sh

@@ -66,15 +66,6 @@ mywhich() {
     return 2
 }
 
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
 cant_autostart()
 {
     echo
@@ -88,7 +79,20 @@ delete_file() # $1 = file to delete
 
 install_file() # $1 = source $2 = target $3 = mode
 {
-    run_install $T $OWNERSHIP -m $3 $1 ${2}
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
 }
 
 require()
@@ -181,10 +185,6 @@ done
 
 [ "${INITFILE}" != 'none/' ] && require INITSOURCE && require INITDIR
 
-T="-T"
-
-INSTALLD='-D'
-
 if [ -z "$BUILD" ]; then
     case $(uname) in
 	cygwin*|CYGWIN*)
@@ -226,6 +226,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=suse
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ] ; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -252,17 +254,15 @@ case $BUILD in
 
 	[ -z "$OWNER" ] && OWNER=root
 	[ -z "$GROUP" ] && GROUP=wheel
-	INSTALLD=
-	T=
 	;;
     *)
-	[ -z "$OWNER" ] && OWNER=root
-	[ -z "$GROUP" ] && GROUP=root
+	if [ $(id -u) -eq 0 ]; then
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
 	;;
 esac
 
-OWNERSHIP="-o $OWNER -g $GROUP"
-
 #
 # Determine where to install the firewall script
 #
@@ -276,7 +276,7 @@ case "$HOST" in
     apple)
 	echo "Installing Mac-specific configuration...";
 	;;
-    debian|gentoo|redhat|slackware|archlinux|linux|suse)
+    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
 	;;
     *)
 	echo "ERROR: Unknown HOST \"$HOST\"" >&2
@@ -305,7 +305,6 @@ if [ -n "$DESTDIR" ]; then
     if [ $BUILD != cygwin ]; then
 	if [ `id -u` != 0 ] ; then
 	    echo "Not setting file owner/group permissions, not running as root."
-	    OWNERSHIP=""
 	fi
     fi
 fi
@@ -407,9 +406,9 @@ fi
 if [ ${SHAREDIR} != /usr/share ]; then
     for f in lib.*; do
 	if [ $BUILD != apple ]; then
-	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/shorewall/$f
+	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
 	else
-	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/shorewall/$f
+	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
 	fi
     done
 fi

Shorewall-core/lib.base

@@ -1,7 +1,7 @@
 #
-# Shorewall 4.5 -- /usr/share/shorewall/lib.base
+# Shorewall 5.0 -- /usr/share/shorewall/lib.base
 #
-#     (c) 1999-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -75,6 +75,24 @@ elif [ -z "${VARDIR}" ]; then
     VARDIR="${VARLIB}/${PRODUCT}"
 fi
 
+#
+# Fatal Error
+#
+fatal_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 2
+}
+
+#
+# Not configured Error
+#
+not_configured_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 6
+}
+
 #
 # Conditionally produce message
 #

Shorewall-core/lib.cli

@@ -1,7 +1,7 @@
 #
-# Shorewall 4.5 -- /usr/share/shorewall/lib.cli.
+# Shorewall 5.0 -- /usr/share/shorewall/lib.cli.
 #
-#     (c) 1999-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -25,7 +25,7 @@
 # loaded after this one and replaces some of the functions declared here.
 #
 
-SHOREWALL_CAPVERSION=40606
+SHOREWALL_CAPVERSION=40609
 
 [ -n "${g_program:=shorewall}" ]
 
@@ -42,16 +42,6 @@ fi
 
 . ${SHAREDIR}/shorewall/lib.base
 
-
-#
-# Fatal Error
-#
-fatal_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 2
-}
-
 #
 # Issue an error message and die
 #
@@ -153,29 +143,63 @@ timed_read ()
 }
 
 #
-# Determine if 'syslog -C' is running
+# Determine if 'syslogd -C' or logd -S is running
 #
 syslog_circular_buffer() {
     local pid
     local tty
     local flags
-    local cputime
+    local time
     local path
     local args
     local arg
 
-    ps ax 2> /dev/null | while read pid tty flags cputime path args; do
-	case $path in
-	    syslogd|*/syslogd)
-		for arg in $args; do
-		    if [ x$arg = x-C ]; then
-			echo Yes
-			return
-		    fi
-		done
-		;;
-	esac
-    done
+    ps w 2> /dev/null | (
+	while read pid tty stat time path args; do
+	    case $path in
+		syslogd|*/syslogd)
+		    for arg in $args; do
+			case $arg in
+			    -C*)
+				return 0
+				;;
+			esac
+		    done
+		    ;;
+		logd|*/logd)
+		    for arg in $args; do
+			case $arg in
+			    -S*)
+				return 0
+				;;
+			esac
+		    done
+		    ;;
+	    esac
+	done
+
+	return 1 )
+}
+
+setup_logread() {
+    [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages
+
+    if syslog_circular_buffer; then
+	LOGFILE=logread
+	if qt mywhich tac; then
+	    g_logread="logread | tac"
+	else
+	    g_logread="logread"
+	fi
+    elif [ -r $LOGFILE ]; then
+	if qt mywhich tac; then
+	    g_logread="tac $LOGFILE"
+	else
+	    g_logread="cat $LOGFILE"
+	fi
+    else
+	fatal_error "LOGFILE ($LOGFILE) does not exist or is not readable!"
+    fi
 }
 
 #
@@ -183,31 +207,59 @@ syslog_circular_buffer() {
 #
 packet_log() # $1 = number of messages
 {
-    if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
-	if [ $g_family -eq 4 ]; then
-	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | head -n$1 | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+    if qt mywhich tac; then
+	if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
+	    if [ $g_family -eq 4 ]; then
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | head -n$1 | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	    else
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' | head -n$1 | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    fi
+	elif [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  head -n$1 | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
 	else
-	    $g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' | head -n$1 | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' |  head -n$1 | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
 	fi
-    elif [ $g_family -eq 4 ]; then
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  head -n$1 | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
     else
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' |  head -n$1 | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
-    fi
+	if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
+	    if [ $g_family -eq 4 ]; then
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | tail -n$1 | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	    else
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' | tail -n$1 | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    fi
+	elif [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  tail -n$1 | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
+	else
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' |  tail -n$1 | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	fi
+    fi	
 }
 
 search_log() # $1 = IP address to search for
 {
-    if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
-        if [ $g_family -eq 4 ]; then
-	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+    if qt mywhich tac; then
+	if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
+            if [ $g_family -eq 4 ]; then
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	    else
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    fi
+	elif [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
 	else
-	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
 	fi
-    elif [ $g_family -eq 4 ]; then
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
     else
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
+            if [ $g_family -eq 4 ]; then
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	    else
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    fi
+	elif [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
+	else
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	fi
     fi
 }
 
@@ -290,17 +342,7 @@ show_bl() {
 logwatch() # $1 = timeout -- if negative, prompt each time that
 	   #		     an 'interesting' packet count changes
 {
-    if [ -z "$LOGFILE" ]; then
-	LOGFILE=/var/log/messages
-
-	if [ -n "$(syslog_circular_buffer)" ]; then
-	    g_logread="logread | tac"
-	elif [ -r $LOGFILE ]; then
-	    g_logread="tac $LOGFILE"
-	else
-	    fatal_error "LOGFILE ($LOGFILE) does not exist!"
-	fi
-    fi
+    setup_logread
 
     host=$(echo $g_hostname | sed 's/\..*$//')
     oldrejects=$($g_tool -L -v -n | grep 'LOG')
@@ -375,7 +417,18 @@ savesets() {
 
     supported=$(run_it ${VARDIR}/firewall help | fgrep savesets )
 
-    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${g_restorepath}-ipsets
+    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${g_restorepath}-ipsets 
+}
+
+#
+# Proactive save of the current ipset contents
+#
+savesets1() {
+    local supported
+
+    supported=$(run_it ${VARDIR}/firewall help | fgrep savesets )
+
+    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${VARDIR}/ipsets.save && progress_message3 "The ipsets have been saved to ${VARDIR}/ipsets.save"
 }
 
 #
@@ -387,7 +440,7 @@ do_save() {
     status=0
 
     if [ -f ${VARDIR}/firewall ]; then
-	if $iptables_save | iptablesbug | grep -v -- '-A dynamic.* -j ACCEPT' > ${VARDIR}/restore-$$; then
+	if $iptables_save | grep -v -- '-A dynamic.* -j ACCEPT' > ${VARDIR}/restore-$$; then
 	    cp -f ${VARDIR}/firewall $g_restorepath
 	    mv -f ${VARDIR}/restore-$$ ${g_restorepath}-iptables
 	    chmod +x $g_restorepath
@@ -408,10 +461,7 @@ do_save() {
 	    resolve_arptables
 
 	    if [ -n "$arptables" ]; then
-	        #
-	        # 'sed' command is a hack to work around broken arptables_jf
-	        #
-		if ${arptables}-save | sed 's/-p[[:space:]]\+0\([[:digit:]]\)00\/ffff/-p 000\1\/ffff/' > ${VARDIR}/restore-$$; then
+		if ${arptables}-save > ${VARDIR}/restore-$$; then
 		    if grep -q '^-A' ${VARDIR}/restore-$$; then
 			mv -f ${VARDIR}/restore-$$ ${g_restorepath}-arptables
 		    else
@@ -456,16 +506,7 @@ do_save() {
 		esac
 
 		if [ -n "$IPSET" ]; then
-		    if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then
-			#
-			# The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny
-			#
-			hack='| grep -v /31'
-		    else
-			hack=
-		    fi
-
-		    if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then
+		    if eval $IPSET -S > ${VARDIR}/ipsets.tmp; then
 			#
 			# Don't save an 'empty' file
 			#
@@ -473,7 +514,7 @@ do_save() {
 		    fi
 		fi
 		;;
-	    [Nn]o)
+	    [Nn]o|ipv4|ipv6)
 		;;
 	    *)
 		error_message "WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS"
@@ -980,8 +1021,6 @@ show_command() {
 
     case "$1" in
 	connections)
-	    [ $# -gt 1 ] && usage 1
-
 	    if [ $g_family -eq 4 ]; then
 		if [ -d /proc/sys/net/netfilter/ ]; then
 		    local count
@@ -996,8 +1035,10 @@ show_command() {
 		echo
 
 		if qt mywhich conntrack ; then
-		    conntrack -f ipv${g_family} -L | show_connections_filter
+		    shift
+		    conntrack -f ipv4 -L $@ | show_connections_filter
 		else
+		    [ $# -gt 1 ] && usage 1
 		    if [ -f /proc/net/ip_conntrack ]; then
 			cat /proc/net/ip_conntrack | show_connections_filter
 		    else
@@ -1005,15 +1046,19 @@ show_command() {
 		    fi
 	        fi
 	    elif qt mywhich conntrack ; then
+		shift
 		echo "$g_product $SHOREWALL_VERSION Connections at $g_hostname - $(date)"
 		echo
-		conntrack -f ipv6 -L | show_connections_filter
+		conntrack -f ipv6 -L $@ | show_connections_filter
 	    else
-		local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
-		local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
-		echo "$g_product $SHOREWALL_VERSION Connections ($count of $max) at $g_hostname - $(date)"
-		echo
-		grep '^ipv6' /proc/net/nf_conntrack | sed -r 's/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | show_connections_filter
+		[ $# -gt 1 ] && usage 1
+		if [ -f /proc/sys/net/netfilter/nf_conntrack_count -a -f /proc/sys/net/nf_conntrack ]; then
+		    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+		    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+		    echo "$g_product $SHOREWALL_VERSION Connections ($count of $max) at $g_hostname - $(date)"
+		    echo
+		    grep '^ipv6' /proc/net/nf_conntrack | sed -r 's/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | show_connections_filter
+		fi
 	    fi
 	    ;;
 	nat)
@@ -1047,17 +1092,7 @@ show_command() {
 	log)
 	    [ $# -gt 2 ] && usage 1
 
-	    if [ -z "$LOGFILE" ]; then
-		LOGFILE=/var/log/messages
-
-		if [ -n "$(syslog_circular_buffer)" ]; then
-		    g_logread="logread | tac"
-		elif [ -r $LOGFILE ]; then
-		    g_logread="tac $LOGFILE"
-		else
-		    fatal_error "LOGFILE ($LOGFILE) does not exist!"
-		fi
-	    fi
+	    setup_logread
 
 	    echo "$g_product $SHOREWALL_VERSION Log ($LOGFILE) at $g_hostname - $(date)"
 	    echo
@@ -1436,17 +1471,7 @@ do_dump_command() {
 	esac
     done
 
-    if [ -z "$LOGFILE" ]; then
-	LOGFILE=/var/log/messages
-
-	if [ -n "$(syslog_circular_buffer)" ]; then
-	    g_logread="logread | tac"
-	elif [ -r $LOGFILE ]; then
-	    g_logread="tac $LOGFILE"
-	else
-	    fatal_error "LOGFILE ($LOGFILE) does not exist! - See http://www.shorewall.net/shorewall_logging.html"
-	fi
-    fi
+    setup_logread
 
     g_ipt_options="$g_ipt_options $g_ipt_options1"
 
@@ -1512,7 +1537,9 @@ do_dump_command() {
 	heading "Conntrack Table"
     fi
 
-    if [ $g_family -eq 4 ]; then
+    if qt mywhich conntrack; then
+	conntrack -f ipv${g_family} -L 2> /dev/null
+    elif [ $g_family -eq 4 ]; then
     	[ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack
     else
 	grep '^ipv6' /proc/net/nf_conntrack
@@ -1599,7 +1626,7 @@ do_dump_command() {
 
     echo
 
-    ss -${g_family}tunap
+    qt mywhich ss && ss -${g_family}tunap || { qt mywhich netstat && netatat -tunap; }
 
     if [ -n "$TC_ENABLED" ]; then
 	heading "Traffic Control"
@@ -1672,7 +1699,7 @@ restore_command() {
 
     if [ -z "$STARTUP_ENABLED" ]; then
 	error_message "ERROR: Startup is disabled"
-	exit 2
+	exit 6
     fi
 
     g_restorepath=${VARDIR}/$RESTOREFILE
@@ -2089,6 +2116,8 @@ delete_command() {
 open_close_command() {
     local command
     local desc
+    local proto
+    local icmptype
 
     open_close_setup() {
 	[ -n "$g_nolock" ] || mutex_on
@@ -2152,7 +2181,11 @@ open_close_command() {
 	desc="from $1 to $2"
 
 	if [ $# -ge 3 ]; then
-	    command="$command -p $3"
+	    proto=$3
+
+	    [ $proto = icmp -a $g_family -eq 6 ] && proto=58
+
+	    command="$command -p $proto"
 
 	    case $3 in
 		[0-9]*)
@@ -2162,22 +2195,57 @@ open_close_command() {
 		    desc="$desc $3"
 		    ;;
 	    esac
+
+	    if [ $g_family -eq 4 ]; then
+		if [ $proto = 6 -o $proto = icmp ]; then
+		    proto=icmp
+		    icmptype='--icmp-type'
+		fi
+	    else
+		if [ $proto = 58 -o $proto = ipv6-icmp ]; then
+		    proto=icmp
+		    icmptype='--icmpv6-type'
+		fi
+	    fi
 	fi
 
 	if [ $# -eq 4 ]; then
-	    command="$command -m multiport --dports $4"
+	    if [ $proto = icmp ]; then
+		case $4 in
+		    *,*)
+			fatal_error "Only a single ICMP type may be specified"
+			;;
+		    [0-9]*)
+			desc="$desc type $4"
+			;;
+		    *)
+			desc="$desc $4"
+			;;
+		esac
 
-	    case $4 in
-		[0-9]*,)
-		    desc="$desc ports $4"
-		    ;;
-		[0-9]*)
-		    desc="$desc port $4"
+		command="$command $icmptype $4"
+	    else
+		case $4 in
+		*,*)
+		    command="$command -m multiport --dports $4"
 		    ;;
 		*)
-		    desc="$desc $4"
+		    command="$command --dport $4"
 		    ;;
-	    esac
+		esac
+
+		case $4 in
+		    [0-9]*,)
+			desc="$desc ports $4"
+			;;
+		    [0-9]*)
+			desc="$desc port $4"
+			;;
+		    *)
+			desc="$desc $4"
+			;;
+		esac
+	    fi
 	fi
 
 	command="$command -j ACCEPT"
@@ -2423,6 +2491,7 @@ determine_capabilities() {
     local chain
     local chain1
     local arptables
+    local helper
 
     if [ -z "$g_tool" ]; then
 	[ $g_family -eq 4 ] && tool=iptables || tool=ip6tables
@@ -2523,6 +2592,7 @@ determine_capabilities() {
     NEW_TOS_MATCH=
     TARPIT_TARGET=
     IFACE_MATCH=
+    TCPMSS_TARGET=
 
     AMANDA_HELPER=
     FTP_HELPER=
@@ -2680,6 +2750,8 @@ determine_capabilities() {
 
     qt $g_tool -A $chain -m iface --iface lo --loopback && IFACE_MATCH=Yes
 
+    qt $g_tool -A $chain -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu && TCPMSS_TARGET=Yes
+
     if [ -n "$MANGLE_ENABLED" ]; then
 	qt $g_tool -t mangle -N $chain
 
@@ -2721,21 +2793,44 @@ determine_capabilities() {
 	if qt $g_tool -t raw -A $chain -j CT --notrack; then
 	    CT_TARGET=Yes;
 
-	    qt $g_tool -t raw -A $chain -p udp --dport 10080 -j CT --helper amanda     && AMANDA_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p tcp --dport 21    -j CT --helper ftp        && FTP_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p tcp --dport 21    -j CT --helper ftp-0      && FTP0_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p udp --dport 1719  -j CT --helper RAS        && H323_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p tcp --dport 6667  -j CT --helper irc        && IRC_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p tcp --dport 6667  -j CT --helper irc-0      && IRC0_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p udp --dport 137   -j CT --helper netbios-ns && NETBIOS_NS_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p tcp --dport 1729  -j CT --helper pptp       && PPTP_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p tcp --dport 6566  -j CT --helper sane       && SANE_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p tcp --dport 6566  -j CT --helper sane-0     && SANE0_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p udp --dport 5060  -j CT --helper sip        && SIP_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p udp --dport 5060  -j CT --helper sip-0      && SIP0_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p udp --dport 161   -j CT --helper snmp       && SNMP_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p udp --dport 69    -j CT --helper tftp       && TFTP_HELPER=Yes
-	    qt $g_tool -t raw -A $chain -p udp --dport 69    -j CT --helper tftp-0     && TFTP0_HELPER=Yes
+	    for helper in amanda ftp ftp0 h323 irc irc0 netbios_ns pptp sane sane0 sip sip0 snmp tftp tftp0; do
+		eval ${helper}_ENABLED=''
+	    done
+
+	    if [ -n "$HELPERS" ]; then
+		for helper in $(split_list "$HELPERS"); do
+		    case $helper in
+			none)
+			    ;;
+			amanda|ftp|ftp0|h323|irc|irc0|netbios_ns|pptp|sane|sane0|sip|sip0|snmp|tftp|tftp0)
+			    eval ${helper}_ENABLED=Yes
+			    ;;
+			*)
+			    error_message "WARNING: Invalid helper ($helper) ignored"
+			    ;;
+		    esac
+		done
+	    else
+		for helper in amanda ftp ftp0 h323 irc irc0 netbios_ns pptp sane sane0 sip sip0 snmp tftp tftp0; do
+		    eval ${helper}_ENABLED=Yes
+		done
+	    fi
+
+	    [ -n "$amanda_ENABLED" ]     && qt $g_tool -t raw -A $chain -p udp --dport 10080 -j CT --helper amanda     && AMANDA_HELPER=Yes
+	    [ -n "$ftp_ENABLED" ]        && qt $g_tool -t raw -A $chain -p tcp --dport 21    -j CT --helper ftp        && FTP_HELPER=Yes
+	    [ -n "$ftp0_ENABLED" ]       && qt $g_tool -t raw -A $chain -p tcp --dport 21    -j CT --helper ftp-0      && FTP0_HELPER=Yes
+	    [ -n "$h323_ENABLED" ]       && qt $g_tool -t raw -A $chain -p udp --dport 1719  -j CT --helper RAS        && H323_HELPER=Yes
+	    [ -n "$irc_ENABLED" ]        && qt $g_tool -t raw -A $chain -p tcp --dport 6667  -j CT --helper irc        && IRC_HELPER=Yes
+	    [ -n "$irc0_ENABLED" ]       && qt $g_tool -t raw -A $chain -p tcp --dport 6667  -j CT --helper irc-0      && IRC0_HELPER=Yes
+	    [ -n "$netbios_ns_ENABLED" ] && qt $g_tool -t raw -A $chain -p udp --dport 137   -j CT --helper netbios-ns && NETBIOS_NS_HELPER=Yes
+	    [ -n "$pptp_ENABLED" ]       && qt $g_tool -t raw -A $chain -p tcp --dport 1729  -j CT --helper pptp       && PPTP_HELPER=Yes
+	    [ -n "$sane_ENABLED" ]       && qt $g_tool -t raw -A $chain -p tcp --dport 6566  -j CT --helper sane       && SANE_HELPER=Yes
+	    [ -n "$sane0_ENABLED" ]      && qt $g_tool -t raw -A $chain -p tcp --dport 6566  -j CT --helper sane-0     && SANE0_HELPER=Yes
+	    [ -n "$sip_ENABLED" ]        && qt $g_tool -t raw -A $chain -p udp --dport 5060  -j CT --helper sip        && SIP_HELPER=Yes
+	    [ -n "$sip0_ENABLED" ]       && qt $g_tool -t raw -A $chain -p udp --dport 5060  -j CT --helper sip-0      && SIP0_HELPER=Yes
+	    [ -n "$snmp_ENABLED" ]       && qt $g_tool -t raw -A $chain -p udp --dport 161   -j CT --helper snmp       && SNMP_HELPER=Yes
+	    [ -n "$tftp_ENABLED" ]       && qt $g_tool -t raw -A $chain -p udp --dport 69    -j CT --helper tftp       && TFTP_HELPER=Yes
+	    [ -n "$tftp0_ENABLED" ]      && qt $g_tool -t raw -A $chain -p udp --dport 69    -j CT --helper tftp-0     && TFTP0_HELPER=Yes
 	fi
 
 	qt $g_tool -t raw -F $chain
@@ -2949,16 +3044,17 @@ report_capabilities_unsorted() {
     report_capability "IMQ Target (IMQ_TARGET)" $IMQ_TARGET
     report_capability "DSCP Match (DSCP_MATCH)" $DSCP_MATCH
     report_capability "DSCP Target (DSCP_TARGET)" $DSCP_TARGET
-    report_capability "Geo IP match" $GEOIP_MATCH
-    report_capability "RPFilter match" $RPFILTER_MATCH
-    report_capability "NFAcct match" $NFACCT_MATCH
-    report_capability "Checksum Target" $CHECKSUM_TARGET
-    report_capability "Arptables JF" $ARPTABLESJF
-    report_capability "MASQUERADE Target" $MASQUERADE_TGT
-    report_capability "UDPLITE Port Redirection" $UDPLITEREDIRECT
-    report_capability "New tos Match" $NEW_TOS_MATCH
-    report_capability "TARPIT Target" $TARPIT_TARGET
-    report_capability "Iface Match" $IFACE_MATCH
+    report_capability "Geo IP Match (GEOIP_MATCH)" $GEOIP_MATCH
+    report_capability "RPFilter Match (RPFILTER_MATCH)" $RPFILTER_MATCH
+    report_capability "NFAcct Match" $NFACCT_MATCH
+    report_capability "Checksum Target (CHECKSUM_TARGET)" $CHECKSUM_TARGET
+    report_capability "Arptables JF (ARPTABLESJF)" $ARPTABLESJF
+    report_capability "MASQUERADE Target (MASQUERADE_TGT)" $MASQUERADE_TGT
+    report_capability "UDPLITE Port Redirection (UDPLITEREDIRECT)" $UDPLITEREDIRECT
+    report_capability "New tos Match (NEW_TOS_MATCH)" $NEW_TOS_MATCH
+    report_capability "TARPIT Target (TARPIT_TARGET)" $TARPIT_TARGET
+    report_capability "Iface Match (IFACE_MATCH)" $IFACE_MATCH
+    report_capability "TCPMSS Target (TCPMSS_TARGET)" $TCPMSS_TARGET
 
     report_capability "Amanda Helper" $AMANDA_HELPER
     report_capability "FTP Helper" $FTP_HELPER
@@ -3088,6 +3184,7 @@ report_capabilities_unsorted1() {
     report_capability1 NEW_TOS_MATCH
     report_capability1 TARPIT_TARGET
     report_capability1 IFACE_MATCH
+    report_capability1 TCPMSS_TARGET
 
     report_capability1 AMANDA_HELPER
     report_capability1 FTP_HELPER
@@ -3432,10 +3529,34 @@ noiptrace_command() {
 	fatal_error "$g_product is not started"
     fi
 }
+
 #
-# Set the configuration variables from shorewall-lite.conf
+# Verify that we have a compiled firewall script
+#
+verify_firewall_script() {
+    if [ ! -f $g_firewall ]; then
+	echo "   ERROR: $g_product is not properly installed" >&2
+	if [ -L $g_firewall ]; then
+	    echo "          $g_firewall is a symbolic link to a" >&2
+	    echo "          non-existant file" >&2
+	else
+	    echo "          The file $g_firewall does not exist" >&2
+	fi
+
+	exit 2
+    fi
+}
+
+################################################################################
+# The remaining functions are used by the Lite cli - they are overloaded by
+# the Standard CLI by loading lib.cli-std
+################################################################################
+#
+# Set the configuration variables from shorewall[6]-lite.conf.
 #
 get_config() {
+    local config
+    local lib
 
     ensure_config_path
 
@@ -3457,15 +3578,7 @@ get_config() {
 
     [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 
-    [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages
-
-    if ( ps ax 2> /dev/null | grep -v grep |  qt grep 'syslogd.*-C' ) ; then
-	g_logread="logread | tac"
-    elif [ -r $LOGFILE ]; then
-	g_logread="tac $LOGFILE"
-    else
-	fatal_error "LOGFILE ($LOGFILE) does not exist!"
-    fi
+    setup_logread
     #
     # See if we have a real version of "tail" -- use separate redirection so
     # that ash (aka /bin/sh on LRP) doesn't crap
@@ -3527,7 +3640,13 @@ get_config() {
 	VERBOSITY=2
     fi
 
-    g_hostname=$(hostname 2> /dev/null)
+    if qt mywhich hostname; then
+	g_hostname=$(hostname 2> /dev/null)
+    elif qt mywhich uname; then
+	g_hostname=$(uname -n 2> /dev/null)
+    else
+	g_hostname=localhost
+    fi
 
     if [ -n "$IPSET" ]; then
 	case "$IPSET" in
@@ -3548,35 +3667,30 @@ get_config() {
 	IPSET=''
     fi
 
+    if [ -n "$WORKAROUNDS" ]; then
+	case $WORKAROUNDS in
+	    [Yy]es)
+	        ;;
+	    [Nn]o)
+		WORKAROUNDS=''
+		;;
+	    *)
+		fatal_error "Invalid setting ($WORKAROUNDS) for WORKAROUNDS"
+		;;
+	esac
+    fi
+
     TC=tc
 
     IP=$(mywhich ip 2> /dev/null)
 
     g_loopback=$(find_loopback_interfaces)
 
+    lib=$(find_file lib.cli-user)
+
+    [ -f $lib ] && . $lib
+
 }
-
-#
-# Verify that we have a compiled firewall script
-#
-verify_firewall_script() {
-    if [ ! -f $g_firewall ]; then
-	echo "   ERROR: $g_product is not properly installed" >&2
-	if [ -L $g_firewall ]; then
-	    echo "          $g_firewall is a symbolic link to a" >&2
-	    echo "          non-existant file" >&2
-	else
-	    echo "          The file $g_firewall does not exist" >&2
-	fi
-
-	exit 2
-    fi
-}
-
-################################################################################
-# The remaining functions are used by the Lite cli - they are overloaded by
-# the Standard CLI by loading lib.cli-std
-################################################################################
 #
 # Start Command Executor
 #
@@ -3599,7 +3713,7 @@ start_command() {
 	else
 	    error_message "${VARDIR}/firewall is missing or is not executable"
 	    logger -p kern.err "ERROR:$g_product start failed"
-	    rc=2
+	    rc=6
 	fi
 
 	[ -n "$g_nolock" ] || mutex_off
@@ -3668,7 +3782,7 @@ start_command() {
 }
 
 #
-# Restart Command Executor
+# Reload/Restart Command Executor
 #
 restart_command() {
     local finished
@@ -3727,12 +3841,12 @@ restart_command() {
     [ -n "$g_nolock" ] || mutex_on
 
     if [ -x ${VARDIR}/firewall ]; then
-	run_it ${VARDIR}/firewall $g_debugging restart
+	run_it ${VARDIR}/firewall $g_debugging $COMMAND
 	rc=$?
     else
 	error_message "${VARDIR}/firewall is missing or is not executable"
-	logger -p kern.err "ERROR:$g_product restart failed"
-	rc=2
+	logger -p kern.err "ERROR:$g_product $COMMAND failed"
+	rc=6
     fi
 
     [ -n "$g_nolock" ] || mutex_off
@@ -3747,6 +3861,12 @@ run_command() {
     fi
 }
 
+#
+# Echo the parameters if product is Shorewall or Shorewall6
+#
+ecko() {
+    [ -z "$g_lite" ] && echo "$@"
+}
 #
 # Give Usage Information
 #
@@ -3756,13 +3876,16 @@ usage() # $1 = exit status
     echo "where <command> is one of:"
     echo "   add <interface>[:<host-list>] ... <zone>"
     echo "   allow <address> ..."
+    ecko "   [ check | ck ] [ -e ] [ -r ] [ -p ] [ -r ] [ -T ] [ -i ] [ <directory> ]"
     echo "   clear"
+    ecko "   [ compile | co ] [ -e ] [ -p ] [ -t ] [ -c ] [ -d ] [ -T ] [ -i ] [ <directory name> ] [ <path name> ]"
     echo "   close <source> <dest> [ <protocol> [ <port> ] ]" 
     echo "   delete <interface>[:<host-list>] ... <zone>"
     echo "   disable <interface>"
     echo "   drop <address> ..."
     echo "   dump [ -x ] [ -l ] [ -m ]"
     echo "   enable <interface>"
+    ecko "   export [ <directory1> ] [<user>@]<system>[:<directory2>]"
     echo "   forget [ <file name> ]"
     echo "   help"
 
@@ -3772,19 +3895,53 @@ usage() # $1 = exit status
 	echo "   iprange <address>-<address>"
     fi
 
+    if [ $g_family -eq 4 ]; then
+	echo "   iptrace <iptables match expression>"
+    else
+	echo "   iptrace <ip6tables match expression>"
+    fi
+
+    ecko "   load [ -s ] [ -c ] [ -r <root user> ] [ -T ] [ -i ] [ <directory> ] <system>"
     echo "   logdrop <address> ..."
     echo "   logreject <address> ..."
     echo "   logwatch [<refresh interval>]"
+
+    if [ $g_family -eq 4 ]; then
+	echo "   noiptrace <iptables match expression>"
+    else
+	echo "   noiptrace <ip6tables match expression>"
+    fi
+
     echo "   open <source> <dest> [ <protocol> [ <port> ] ]" 
+    echo "   reenable <interface>"
+    ecko "   refresh [ -d ] [ -n ] [ -T ] [ -D <directory> ] [ <chain>... ]"
     echo "   reject <address> ..."
+    ecko "   reload [ -s ] [ -c ] [ -r <root user> ] [ -T ] [ -i ] [ <directory> ] <system>"
+
+    if [ -z "$g_lite" ]; then
+	echo "   remote-reload [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-restart [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-start [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+    fi
+
     echo "   reset [ <chain> ... ]"
-    echo "   restart [ -n ] [ -p ] [ -f ] [ -C ] [ <directory> ]"
+
+    if [ -n "$g_lite" ]; then
+	echo "   restart [ -n ] [ -p ] [ -f ] [ -C ] [ <directory> ]"
+    else
+	echo "   restart [ -n ] [ -p ] [-d] [ -f ] [ -c ] [ -T ] [ -i ] [ -C ] [ <directory> ]"
+    fi
+
     echo "   restore [ -n ] [ -p ] [ -C ] [ <file name> ]"
     echo "   run <command> [ <parameter> ... ]"
+    ecko "   safe-restart [ -t <timeout> ] [ <directory> ]"
+    ecko "   safe-start [ -t <timeout> ] [ <directory> ]"
     echo "   save [ -C ] [ <file name> ]"
+    echo "   savesets"
     echo "   [ show | list | ls ] [ -b ] [ -x ] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]"
-    echo "   [ show | list | ls ] [ -f ] capabilities"
+    ecko "   [ show | list | ls ] actions"
     echo "   [ show | list | ls ] arptables"
+    echo "   [ show | list | ls ] [ -f ] capabilities"
     echo "   [ show | list | ls ] [ -x ] {bl|blacklists}"
     echo "   [ show | list | ls ] classifiers"
     echo "   [ show | list | ls ] config"
@@ -3800,6 +3957,8 @@ usage() # $1 = exit status
 
     echo "   [ show | list | ls ] [ -m ] log [<regex>]"
     echo "   [ show | list | ls ] [ -x ] mangle|nat|raw|rawpost"
+    ecko "   [ show | list | ls ] macro <macro>"
+    ecko "   [ show | list | ls ] macros"
     echo "   [ show | list | ls ] nfacct"
     echo "   [ show | list | ls ] opens"
     echo "   [ show | list | ls ] policies"
@@ -3807,9 +3966,17 @@ usage() # $1 = exit status
     echo "   [ show | list | ls ] tc [ device ]"
     echo "   [ show | list | ls ] vardir"
     echo "   [ show | list | ls ] zones"
-    echo "   start [ -f ] [ -p ] [ -C ] [ <directory> ]"
-    echo "   stop"
+
+    if [ -n "$g_lite" ]; then
+	echo "   start [ -f ] [ -p ] [ -C ] [ <directory> ]"
+    else
+	echo "   start [ -f ] [ -n ] [ -p ] [ -c ] [ -T ] [ -i ] [ -C ] [ <directory> ]"
+    fi
+
     echo "   status [ -i ]"
+    echo "   stop"
+    ecko "   try <directory> [ <timeout> ]"
+    ecko "   update [ -a ] [ -b ] [ -r ] [ -T ]  [ -D ] [ -i ] [-t] [-s] [-n] [-A] [ <directory> ]"
     echo "   version [ -a ]"
     echo
     exit $1
@@ -3847,7 +4014,6 @@ shorewall_cli() {
     g_refreshchains=:none:
     g_confess=
     g_update=
-    g_convert=
     g_annotate=
     g_recovering=
     g_timestamp=
@@ -3856,11 +4022,10 @@ shorewall_cli() {
     g_conditional=
     g_file=
     g_doing="Compiling"
-    g_directives=
     g_inline=
-    g_tcrules=
     g_counters=
     g_loopback=
+    g_compiled=
 
     VERBOSE=
     VERBOSITY=1
@@ -3982,10 +4147,6 @@ shorewall_cli() {
 
     [ -n "${VARDIR:=/var/lib/$g_program}" ]
 
-    if [ ! -f ${VARDIR}/firewall ]; then
-	[ -f ${VARDIR}/.restore ] && cp -f ${VARDIR}/.rstore ${VARDIR}/firewall
-    fi
-
     g_firewall=${VARDIR}/firewall
 
     version_file=${g_sharedir}/version
@@ -4043,12 +4204,12 @@ shorewall_cli() {
 	    run_it $g_firewall $g_debugging reset $@
 	    [ -n "$g_nolock" ] || mutex_off
 	    ;;
-	restart)
+	reload|restart)
 	    get_config Yes Yes
 	    shift
 	    restart_command $@
 	    ;;
-	disable|enable)
+	disable|enable|reenable)
 	    get_config Yes
 	    if product_is_started; then
 		run_it ${VARDIR}/firewall $g_debugging $@
@@ -4160,10 +4321,29 @@ shorewall_cli() {
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    #
-	    # Undocumented way to call functions in the libraries directly
+	    # Way to call functions in the libraries directly
 	    #
 	    shift
-	    $@
+
+	    if [ $# -gt 0 ]; then
+		#
+		# First look for it here
+		#
+		if type $1 2> /dev/null | fgrep -q 'is a function'; then
+		    #
+		    # It's a shell function -- call it
+		    #
+		    $@
+		else
+		    #
+		    # It isn't a function visible to this script -- try
+		    # the compiled firewall
+		    #
+		    run_it $g_firewall $g_debugging call $@
+		fi
+	    else
+		usage 1
+	    fi
 	    ;;
 	help)
 	    shift
@@ -4179,6 +4359,12 @@ shorewall_cli() {
 	    shift
 	    noiptrace_command $@
 	    ;;
+	savesets)
+	    [ $# -eq 1 ] || usage 1
+	    get_config
+	    [ -n "$g_debugging" ] && set -x
+	    savesets1
+	    ;;
 	*)
 	    if [ -z "$g_lite" ]; then
 		compiler_command $@

Shorewall-core/lib.common

@@ -1,7 +1,7 @@
 #
-# Shorewall 4.5 -- /usr/share/shorewall/lib.common.
+# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
 #
-#     (c) 2010-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -33,7 +33,7 @@ startup_error() # $* = Error Message
     echo "   ERROR: $@: Firewall state not changed" >&2
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%_b %d %T') "
+        timestamp="$(date +'%b %d %T') "
         echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
     fi
 
@@ -50,7 +50,7 @@ startup_error() # $* = Error Message
     esac
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%_b %d %T') "
+        timestamp="$(date +'%b %d %T') "
 
 	case $COMMAND in
 	    start)
@@ -71,99 +71,35 @@ startup_error() # $* = Error Message
 }
 
 #
-# Get the Shorewall version of the passed script
-#
-get_script_version() { # $1 = script
-    local temp
-    local version
-    local ifs
-    local digits
-    local verbosity
-
-    verbosity="$VERBOSITY"
-    VERBOSITY=0
-
-    temp=$( $SHOREWALL_SHELL $1 version | tail -n 1 | sed 's/-.*//' )
-
-    if [ -z "$temp" ]; then
-	version=0
-    else
-	ifs=$IFS
-	IFS=.
-	temp=$(echo $temp)
-	IFS=$ifs
-	digits=0
-
-	for temp in $temp; do
-	    version=${version}$(printf '%02d' $temp)
-	    digits=$(($digits + 1))
-	    [ $digits -eq 3 ] && break
-	done
-    fi
-
-    echo $version
-
-    VERBOSITY="$verbosity"
-}
-
-#
-# Do required exports or create the required option string and run the passed script using
+# Create the required option string and run the passed script using
 # $SHOREWALL_SHELL
 #
 run_it() {
     local script
     local options
-    local version
 
     export VARDIR
 
     script=$1
     shift
 
-    version=$(get_script_version $script)
-
-    if [ $version -lt 040408 ]; then
-	#
-	# Old script that doesn't understand 4.4.8 script options
-	#
-	export RESTOREFILE
-	export VERBOSITY
-	export NOROUTES=$g_noroutes
-	export PURGE=$g_purge
-	export TIMESTAMP=$g_timestamp
-	export RECOVERING=$g_recovering
-
-	case "$g_program" in
-	    *-lite)
-		#
-		# Shorewall Lite
-		#
-		export LOGFORMAT
-		export IPTABLES
-		;;
-	esac
+    if [ x$1 = xtrace -o x$1 = xdebug ]; then
+	options="$1 -"
+	shift;
     else
-	#
-	# 4.4.8 or later -- no additional exports required
-	#
-	if [ x$1 = xtrace -o x$1 = xdebug ]; then
-	    options="$1 -"
-	    shift;
-	else
-	    options='-'
-	fi
-
-	[ -n "$g_noroutes" ]   && options=${options}n
-	[ -n "$g_timestamp" ]  && options=${options}t
-	[ -n "$g_purge" ]      && options=${options}p
-	[ -n "$g_recovering" ] && options=${options}r
-	[ -n "$g_counters" ]   && options=${options}c
-
-	options="${options}V $VERBOSITY"
-
-	[ -n "$RESTOREFILE" ] && options="${options} -R $RESTOREFILE"
+	options='-'
     fi
 
+    [ -n "$g_noroutes" ]   && options=${options}n
+    [ -n "$g_timestamp" ]  && options=${options}t
+    [ -n "$g_purge" ]      && options=${options}p
+    [ -n "$g_recovering" ] && options=${options}r
+    [ -n "$g_counters" ]   && options=${options}c
+
+    options="${options}V $VERBOSITY"
+
+    [ -n "$RESTOREFILE" ] && options="${options} -R $RESTOREFILE"
+
     $SHOREWALL_SHELL $script $options $@
 }
 
@@ -211,6 +147,17 @@ split() {
     IFS=$ifs
 }
 
+#
+# Split a comma-separated list into a space-separated list
+#
+split_list() {
+    local ifs
+    ifs=$IFS
+    IFS=,
+    echo $*
+    IFS=$ifs
+}
+
 #
 # Search a list looking for a match -- returns zero if a match found
 # 1 otherwise
@@ -369,6 +316,7 @@ reload_kernel_modules() {
     local moduleloader
     moduleloader=modprobe
     local uname
+    local extras
 
     if ! qt mywhich modprobe; then
 	moduleloader=insmod
@@ -376,9 +324,25 @@ reload_kernel_modules() {
 
     [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
 
-    [ -z "$MODULESDIR" ] && \
-	uname=$(uname -r) && \
+    if [ -n "$MODULESDIR" ]; then
+	case "$MODULESDIR" in
+	    +*)
+		extras="$MODULESDIR"
+		extras=${extras#+}
+		MODULESDIR=
+		;;
+	esac
+    fi
+
+    if [ -z "$MODULESDIR" ]; then
+	uname=$(uname -r)
 	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	if [ -n "$extras" ]; then
+	    for directory in $(split "$extras"); do
+		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
+	    done
+	fi
+    fi
 
     [ -d /sys/module/ ] || MODULES=$(lsmod | cut -d ' ' -f1)
 
@@ -408,6 +372,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
     local savemoduleinfo
     savemoduleinfo=${1:-Yes} # So old compiled scripts still work
     local uname
+    local extras
 
     if ! qt mywhich modprobe; then
 	moduleloader=insmod
@@ -415,9 +380,25 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 
     [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
 
-    [ -z "$MODULESDIR" ] && \
-	uname=$(uname -r) && \
+    if [ -n "$MODULESDIR" ]; then
+	case "$MODULESDIR" in
+	    +*)
+		extras="$MODULESDIR"
+		extras=${extras#+}
+		MODULESDIR=
+		;;
+	esac
+    fi
+
+    if [ -z "$MODULESDIR" ]; then
+	uname=$(uname -r)
 	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	if [ -n "$extras" ]; then
+	    for directory in $(split "$extras"); do
+		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
+	    done
+	fi
+    fi
 
     for directory in $(split $MODULESDIR); do
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
@@ -552,9 +533,9 @@ in_network() # $1 = IP address, $2 = CIDR network
 #
 # Query NetFilter about the existence of a filter chain
 #
-chain_exists() # $1 = chain name
+chain_exists() # $1 = chain name, $2 = table name (optional)
 {
-    qt1 $g_tool -L $1 -n
+    qt1 $g_tool -t ${2:-filter} -L $1 -n
 }
 
 #
@@ -762,12 +743,15 @@ mutex_on()
     local lockf
     lockf=${LOCKFILE:=${VARDIR}/lock}
     local lockpid
+    local lockd
 
     MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}
 
     if [ $MUTEX_TIMEOUT -gt 0 ]; then
 
-	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}
+	lockd=$(dirname $LOCKFILE)
+
+	[ -d "$lockd" ] || mkdir -p "$lockd"
 
 	if [ -f $lockf ]; then
 	    lockpid=`cat ${lockf} 2> /dev/null`
@@ -787,6 +771,11 @@ mutex_on()
 	    chmod u+w ${lockf}
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
+	elif qt mywhich lock; then
+            lock -${MUTEX_TIMEOUT} -r1 ${lockf}
+            chmod u+w ${lockf}
+            echo $$ > ${lockf}
+            chmod u-w ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1

Shorewall-core/shorewallrc.apple

@@ -1,5 +1,5 @@
 #
-# Apple OS X Shorewall 4.5 rc file
+# Apple OS X Shorewall 5.0 rc file
 #
 BUILD=apple
 HOST=apple

Shorewall-core/shorewallrc.archlinux

@@ -1,5 +1,5 @@
 #
-# Arch Linux Shorewall 4.5 rc file
+# Arch Linux Shorewall 5.0 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=archlinux

Shorewall-core/shorewallrc.cygwin

@@ -1,5 +1,5 @@
 #
-# Cygwin Shorewall 4.5 rc file
+# Cygwin Shorewall 5.0 rc file
 #
 BUILD=cygwin
 HOST=cygwin

Shorewall-core/shorewallrc.debian.systemd

@@ -0,0 +1,23 @@
+#
+# Debian Shorewall 4.5 rc file
+#
+BUILD=					#Default is to detect the build system
+HOST=debian
+PREFIX=/usr				#Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share		#Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share		#Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall	#Directory to install Shorewall Perl module directory
+CONFDIR=/etc				#Directory where subsystem configurations are installed
+SBINDIR=/sbin				#Directory where system administration programs are installed
+MANDIR=${PREFIX}/share/man		#Directory where manpages are installed.
+INITDIR=				#Directory where SysV init scripts are installed.
+INITFILE=				#Name of the product's installed SysV init script
+INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
+ANNOTATED=				#If non-zero, annotated configuration files are installed
+SYSCONFFILE=default.debian		#Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
+SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
+SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/var/lib				#Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT		#Directory where product variable data is stored.

Shorewall-core/shorewallrc.debian.sysvinit

@@ -15,9 +15,9 @@ INITFILE=$PRODUCT                       #Name of the product's installed SysV in
 INITSOURCE=init.debian.sh               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
 SYSCONFFILE=default.debian              #Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default                 #Directory where SysV init parameter files are installed
-SERVICEDIR=                             #Directory where .service files are installed (systems running systemd only)
+SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes                              #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.

Shorewall-core/shorewallrc.default

@@ -1,5 +1,5 @@
 #
-# Default Shorewall 4.5 rc file
+# Default Shorewall 5.0 rc file
 #
 HOST=linux                              #Generic Linux
 BUILD=                                  #Default is to detect the build system

Shorewall-core/shorewallrc.openwrt

@@ -0,0 +1,26 @@
+#
+# Created by Shorewall Core version 5.0.2-RC1 configure -  Fri, Nov 06, 2015 10:02:03 AM
+#
+# Input: host=openwrt
+#
+HOST=openwrt
+PREFIX=/usr                             
+SHAREDIR=${PREFIX}/share                
+LIBEXECDIR=${PREFIX}/share              
+PERLLIBDIR=${PREFIX}/share/shorewall    
+CONFDIR=/etc                            
+SBINDIR=/sbin                           
+MANDIR=${PREFIX}/man                    
+INITDIR=/etc/init.d                     
+INITSOURCE=init.openwrt.sh
+INITFILE=$PRODUCT                       
+AUXINITSOURCE=
+AUXINITFILE=
+SERVICEDIR=                             
+SERVICEFILE=                            
+SYSCONFFILE=default.openwrt
+SYSCONFDIR=${CONFDIR}/sysconfig
+SPARSE=                                 
+ANNOTATED=                              
+VARLIB=/lib
+VARDIR=${VARLIB}/$PRODUCT               

Shorewall-core/shorewallrc.redhat

@@ -1,5 +1,5 @@
 #
-# RedHat/FedoraShorewall 4.5 rc file
+# RedHat/FedoraShorewall 5.0 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=redhat

Shorewall-core/shorewallrc.slackware

@@ -1,5 +1,5 @@
 #
-# Slackware Shorewall 4.5 rc file
+# Slackware Shorewall 5.0 rc file
 #
 BUILD=slackware
 HOST=slackware

Shorewall-core/shorewallrc.suse

@@ -1,5 +1,5 @@
 #
-# SuSE Shorewall 4.5 rc file
+# SuSE Shorewall 5.0 rc file
 #
 BUILD=                                                #Default is to detect the build system
 HOST=suse

Shorewall-core/uninstall.sh

@@ -35,6 +35,12 @@ usage() # $1 = exit status
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
 qt()
 {
     "$@" >/dev/null 2>&1

Shorewall-init/init.debian.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -74,7 +74,9 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || echo_notdone
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+    else
+	return 0
     fi
 }
 
@@ -103,21 +105,17 @@ shorewall_start () {
   echo -n "Initializing \"Shorewall-based firewalls\": "
 
   for PRODUCT in $PRODUCTS; do
-      setstatedir
-
-      if [ -x ${STATEDIR}/firewall ]; then
-          #
-	  # Run in a sub-shell to avoid name collisions
-	  #
-	  ( 
-	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop || echo_notdone
-	      else
-		  echo_notdone
-	      fi
-	  )
-      else
-	  echo_notdone
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+              #
+	      # Run in a sub-shell to avoid name collisions
+	      #
+	      (
+		  if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		      ${STATEDIR}/firewall ${OPTIONS} stop
+		  fi
+	      )
+	  fi
       fi
   done
 
@@ -144,10 +142,10 @@ shorewall_stop () {
 
   echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      setstatedir
-
-      if [ -x ${STATEDIR}/firewall ]; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear || echo_notdone
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
       fi
   done
 

Shorewall-init/init.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -69,10 +69,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ ! -x $STATEDIR/firewall ]; then
-	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
-	fi
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
+    else
+	return 0
     fi
 }
 
@@ -83,11 +83,11 @@ shorewall_start () {
 
   echo -n "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      setstatedir
-
-      if [ -x ${STATEDIR}/firewall ]; then
-	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      ${STATEDIR}/firewall ${OPTIONS} stop || exit 1
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
 	  fi
       fi
   done
@@ -106,10 +106,10 @@ shorewall_stop () {
 
   echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      setstatedir
-
-      if [ -x ${STATEDIR}/firewall ]; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear || exit 1
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
       fi
   done
 

Shorewall-init/init.suse.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -38,7 +38,7 @@
 # 0 - success
 # 1 - generic or unspecified error
 # 2 - invalid or excess argument(s)
-# 3 - unimplemented feature (e.g. "reload")
+# 3 - unimplemented feature
 # 4 - insufficient privilege
 # 5 - program is not installed
 # 6 - program is not configured
@@ -80,7 +80,9 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || exit
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+    else
+	return 0
     fi
 }
 
@@ -91,14 +93,12 @@ shorewall_start () {
 
   echo -n "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      setstatedir
-
-      if [ -x $STATEDIR/firewall ]; then
-	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop || exit
+      if setstatedir; then
+	  if [ -x $STATEDIR/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
+	      fi
 	  fi
-      else
-	  exit 6
       fi
   done
 
@@ -114,12 +114,10 @@ shorewall_stop () {
 
   echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      setstatedir
-
-      if [ -x ${STATEDIR}/firewall ]; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear || exit
-      else
-	  exit 6
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
       fi
   done
 

Shorewall-init/install.sh

@@ -188,6 +188,8 @@ done
 
 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 
+[ $configure -eq 1 ] && ETC=/etc || ETC="${CONFDIR}"
+
 if [ -z "$BUILD" ]; then
     case $(uname) in
 	cygwin*)
@@ -379,9 +381,9 @@ fi
 
 if [ $HOST = debian ]; then
     if [ -n "${DESTDIR}" ]; then
-	mkdir -p ${DESTDIR}/etc/network/if-up.d/
-	mkdir -p ${DESTDIR}/etc/network/if-down.d/
-	mkdir -p ${DESTDIR}/etc/network/if-post-down.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-up.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-down.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-post-down.d/
     elif [ $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
 	mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
@@ -390,15 +392,12 @@ if [ $HOST = debian ]; then
 
     if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
-	    mkdir ${DESTDIR}/etc/default
+	    mkdir ${DESTDIR}${ETC}/default
 	fi
 
-	if [ $configure -eq 1 ]; then
-	    install_file sysconfig ${DESTDIR}/etc/default/shorewall-init 0644
-	else
-	    mkdir -p ${DESTDIR}${CONFDIR}/default
-	    install_file sysconfig ${DESTDIR}${CONFDIR}/default/shorewall-init 0644
-	fi
+	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
+	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
+	echo "sysconfig file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     IFUPDOWN=ifupdown.debian.sh
@@ -408,13 +407,13 @@ else
 
 	if [ -z "$RPM" ]; then
 	    if [ $HOST = suse ]; then
-		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-up.d
-		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-down.d
+		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-up.d
+		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-down.d
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
 	    else
-		mkdir -p ${DESTDIR}/etc/NetworkManager/dispatcher.d
+		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
 	    fi
 	fi
     fi
@@ -440,12 +439,8 @@ mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
-    if [ $configure -eq 1 ]; then
-	install_file ifupdown ${DESTDIR}/etc/NetworkManager/dispatcher.d/01-shorewall 0544
-    else
-	mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
-	install_file ifupdown ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall 0544
-    fi
+    [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
+    install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
 fi
 
 case $HOST in
@@ -496,7 +491,11 @@ esac
 if [ -z "$DESTDIR" ]; then
     if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian ]; then
-	    if mywhich insserv; then
+	    if [ -n "$SERVICEDIR" ]; then
+		if systemctl enable ${PRODUCT}.service; then
+                    echo "Shorewall Init will start automatically at boot"
+		fi
+	    elif mywhich insserv; then
 		if insserv ${INITDIR}/shorewall-init; then
 		    echo "Shorewall Init will start automatically at boot"
 		else
@@ -560,7 +559,7 @@ fi
 
 [ -z "${DESTDIR}" ] && [ ! -f ~/.shorewallrc ] && cp ${SHAREDIR}/shorewall/shorewallrc .
 
-if [ -f ${DESTDIR}/etc/ppp ]; then
+if [ -d ${DESTDIR}/etc/ppp ]; then
     case $HOST in
 	debian|suse)
 	    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do

Shorewall-init/shorewall-init

@@ -1,18 +1,19 @@
-#! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#!/bin/bash
+#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
-#     (c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
+#	(c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
-#       On most distributions, this file should be called /etc/init.d/shorewall.
+#	On most distributions, this file should be called
+#	/etc/init.d/shorewall.
 #
-#       Complete documentation is available at http://shorewall.net
+#	Complete documentation is available at http://shorewall.net
 #
-#       This program is part of Shorewall.
+#	This program is part of Shorewall.
 #
 #	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
+#	it under the terms of the GNU General Public License as published by
+#	the Free Software Foundation, either version 2 of the license or,
+#	at your option, any later version.
 #
 #	This program is distributed in the hope that it will be useful,
 #	but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -22,7 +23,7 @@
 #	You should have received a copy of the GNU General Public License
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
-#########################################################################################
+###############################################################################
 # set the STATEDIR variable
 setstatedir() {
     local statedir
@@ -33,7 +34,9 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || exit 1
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+    else
+	return 0
     fi
 }
 
@@ -46,7 +49,7 @@ setstatedir() {
 if [ -f "$SYSCONFDIR/shorewall-init" ]; then
     . $SYSCONFDIR/shorewall-init
     if [ -z "$PRODUCTS" ]; then
-        echo "ERROR: No products configured" >&2
+	echo "ERROR: No products configured" >&2
 	exit 1
     fi
 else
@@ -56,71 +59,66 @@ fi
 
 # Initialize the firewall
 shorewall_start () {
-  local PRODUCT
-  local STATEDIR
+    local PRODUCT
+    local STATEDIR
 
-  echo -n "Initializing \"Shorewall-based firewalls\": "
-  for PRODUCT in $PRODUCTS; do
-      setstatedir
+    echo -n "Initializing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		#
+		# Run in a sub-shell to avoid name collisions
+		#
+		(
+		    if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+			${STATEDIR}/firewall ${OPTIONS} stop
+		    fi
+		)
+	    fi
+	fi
+    done
 
-      if [ -x ${STATEDIR}/firewall ]; then
-          #
-	  # Run in a sub-shell to avoid name collisions
-	  #
-	  (
-	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop || exit 1
-	      else
-		  exit 1
-	      fi
-	  )
-      else
-          echo ERROR:  ${STATEDIR}/firewall does not exist or is not executable!
-	  exit 1
-      fi
-  done
+    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+	ipset -R < "$SAVE_IPSETS"
+    fi
 
-  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
-      ipset -R < "$SAVE_IPSETS"
-  fi
-
-  return 0
+    return 0
 }
 
 # Clear the firewall
 shorewall_stop () {
-  local PRODUCT
-  local STATEDIR
+    local PRODUCT
+    local STATEDIR
 
-  echo -n "Clearing \"Shorewall-based firewalls\": "
-  for PRODUCT in $PRODUCTS; do
-      setstatedir
+    echo -n "Clearing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
+	fi
+    done
 
-      if [ -x ${STATEDIR}/firewall ]; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear || exit 1
-      fi
-  done
+    if [ -n "$SAVE_IPSETS" ]; then
+	mkdir -p $(dirname "$SAVE_IPSETS")
+	if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	fi
+    fi
 
-  if [ -n "$SAVE_IPSETS" ]; then
-      mkdir -p $(dirname "$SAVE_IPSETS")
-      if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
-      fi
-  fi
-
-  return 0
+    return 0
 }
 
 case "$1" in
-  start)
-     shorewall_start
-     ;;
-  stop)
-     shorewall_stop
-     ;;
-  *)
-     echo "Usage: $0 {start|stop}"
-     exit 1
+    start)
+	shorewall_start
+	;;
+    stop)
+	shorewall_stop
+	;;
+    *)
+	echo "Usage: $0 {start|stop}"
+	exit 1
 esac
 
 exit 0

Shorewall-init/shorewall-init.service

@@ -4,9 +4,8 @@
 #     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
-Description=Shorewall IPv4 firewall (bootup security)
+Description=Shorewall firewall (bootup security)
 Before=network.target
-Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot

Shorewall-init/shorewall-init.service.214

@@ -4,10 +4,9 @@
 #     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
-Description=Shorewall IPv4 firewall (bootup security)
+Description=Shorewall firewall (bootup security)
 Before=network-pre.target
 Wants=network-pre.target
-Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot

Shorewall-init/shorewall-init.service.214.debian

@@ -0,0 +1,21 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
+#
+[Unit]
+Description=Shorewall firewall (bootup security)
+Before=network-pre.target
+Wants=network-pre.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/default/shorewall-init
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
+
+[Install]
+WantedBy=basic.target

Shorewall-init/shorewall-init.service.debian

@@ -0,0 +1,20 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
+#
+[Unit]
+Description=Shorewall firewall (bootup security)
+Before=network.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/default/shorewall-init
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
+
+[Install]
+WantedBy=basic.target

Shorewall-init/uninstall.sh

@@ -35,6 +35,12 @@ usage() # $1 = exit status
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
 qt()
 {
     "$@" >/dev/null 2>&1
@@ -168,9 +174,13 @@ if [ -f "$INITSCRIPT" ]; then
     remove_file $INITSCRIPT
 fi
 
-if [ -n "$SYSTEMD" ]; then
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+if [ -n "$SERVICEDIR" ]; then
     [ $configure -eq 1 ] && systemctl disable shorewall-init.service
-    rm -f $SYSTEMD/shorewall-init.service
+    rm -f $SERVICEDIR/shorewall-init.service
 fi
 
 [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
@@ -196,8 +206,10 @@ if [ -d ${CONFDIR}/ppp ]; then
     done
 
     for file in if-up.local if-down.local; do
-	if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
-	    remove_file ${CONFDIR}/ppp/$FILE
+	if [ -f ${CONFDIR}/ppp/$file ]; then
+	    if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
+		remove_file ${CONFDIR}/ppp/$FILE
+	    fi
 	fi
     done
 fi

Shorewall-lite/configpath

@@ -1,5 +1,5 @@
 #
-# Shorewall Lite version 4.1 - Default Config Path
+# Shorewall Lite version 5 - Default Config Path
 #
 # /usr/share/shorewall-lite/configpath
 #

Shorewall-lite/default.openwrt

@@ -0,0 +1,25 @@
+# sysV init file script configuration(/etc/sysconfdir/shorewall-lite)
+
+# startup option(default "-vvv")
+OPTIONS=
+
+# change default start run level(if none empty; /etc/init.d/shorewall-lite enable)
+START=50
+
+# change default stop run level(if none empty; /etc/init.d/shorewall-lite enable)
+STOP=
+
+# option to pass when shorewall start is executed
+STARTOPTIONS=
+
+# option to pass when shorewall restart is executed
+RESTARTOPTIONS=
+
+# option to pass when shorewall reload is executed
+RELOADOPTIONS=
+
+# option to pass when shorewall stop is executed
+STOPOPTIONS=
+
+# option to pass when shorewall status is executed
+STATUSOPTIONS=

Shorewall-lite/init.openwrt.sh

@@ -0,0 +1,98 @@
+#!/bin/sh /etc/rc.common
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)
+#
+#	On most distributions, this file should be called /etc/init.d/shorewall.
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#	If an error occurs while starting or restarting the firewall, the
+#	firewall is automatically stopped.
+#
+#	Commands are:
+#
+#	   shorewall-lite start			  Starts the firewall
+#	   shorewall-lite restart		  Restarts the firewall
+#	   shorewall-lite reload		  Reload the firewall
+#						  (same as restart)
+#	   shorewall-lite stop			  Stops the firewall
+#	   shorewall-lite status		  Displays firewall status
+#
+
+# description: Packet filtering firewall
+
+# openwrt stuph
+# start and stop runlevel variable
+#START=21
+#STOP=91
+# variable to display what the status command do when /etc/init.d/shorewall-lite is invoke without argument
+EXTRA_COMMANDS="status"
+EXTRA_HELP="Displays shorewall status"
+
+################################################################################
+# Get startup options (override default)
+################################################################################
+OPTIONS="-vvv"
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f ${SYSCONFDIR}/shorewall-lite ]; then
+    . ${SYSCONFDIR}/shorewall-lite
+fi
+
+START=${START:-21}
+STOP=${STOP:-91}
+
+SHOREWALL_INIT_SCRIPT=1
+
+################################################################################
+# E X E C U T I O N    B E G I N S   H E R E				       #
+################################################################################
+# arg1 of init script is arg2 when rc.common is sourced; set to action variable
+command="$action"
+
+start() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${STARTOPTIONS:-$@}
+}
+
+boot() {
+local command="start"
+start
+}
+
+restart() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${RESTARTOPTIONS:-$@}
+}
+
+reload() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${RELOADOPTION:-$@}
+}
+
+stop() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${STOPOPTIONS:-$@}
+}
+
+status() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${STATUSOPTIONS:-$@}
+}

Shorewall-lite/install.sh

@@ -67,15 +67,6 @@ mywhich() {
     return 2
 }
 
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
 cant_autostart()
 {
     echo
@@ -89,7 +80,28 @@ delete_file() # $1 = file to delete
 
 install_file() # $1 = source $2 = target $3 = mode
 {
-    run_install $T $OWNERSHIP -m $3 $1 ${2}
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
+}
+
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+
 }
 
 require()
@@ -187,7 +199,7 @@ elif [ -z "${VARDIR}" ]; then
     VARDIR=${VARLIB}/${PRODUCT}
 fi
 
-for var in SHAREDIR LIBEXECDIRDIRDIR CONFDIR SBINDIR VARLIB VARDIR; do
+for var in SHAREDIR LIBEXECDIR CONFDIR SBINDIR VARLIB VARDIR; do
     require $var
 done
 
@@ -201,8 +213,6 @@ PATH=${SBINDIR}:/bin:/usr${SBINDIR}:/usr/bin:/usr/local/bin:/usr/local${SBINDIR}
 # Determine where to install the firewall script
 #
 cygwin=
-INSTALLD='-D'
-T='-T'
 
 if [ -z "$BUILD" ]; then
     case $(uname) in
@@ -245,6 +255,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=slackware
 	    elif [ -f ${CONFDIR}/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ]; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -260,16 +272,16 @@ case $BUILD in
     apple)
 	[ -z "$OWNER" ] && OWNER=root
 	[ -z "$GROUP" ] && GROUP=wheel
-	INSTALLD=
-	T=
 	;;
     *)
-	[ -z "$OWNER" ] && OWNER=root
-	[ -z "$GROUP" ] && GROUP=root
+	if [ $(id -u) -eq 0 ]; then
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
 	;;
 esac
 
-OWNERSHIP="-o $OWNER -g $GROUP"
+[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
 
 [ -n "$HOST" ] || HOST=$BUILD
 
@@ -300,6 +312,9 @@ case "$HOST" in
     suse)
 	echo "Installing Suse-specific configuration..."
 	;;
+    openwrt)
+	echo "Installing OpenWRT-specific configuration..."
+	;;
     linux)
 	;;
     *)
@@ -316,8 +331,9 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
 
-    install -d $OWNERSHIP -m 755 ${DESTDIR}/${SBINDIR}
-    install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
+    make_directory ${DESTDIR}${SBINDIR} 755
+    make_directory ${DESTDIR}${INITDIR} 755
+
 else
     if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
 	echo "$PRODUCT $VERSION requires Shorewall Core which does not appear to be installed" >&2
@@ -357,7 +373,7 @@ fi
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
 install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
-[ -n "${INITFILE}" ] && install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
+[ -n "${INITFILE}" ] && make_directory ${DESTDIR}${INITDIR} 755
 
 echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
 
@@ -399,7 +415,7 @@ fi
 if [ -n "$SERVICEDIR" ]; then
     mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
@@ -421,9 +437,9 @@ fi
 #
 # Install the  Makefile
 #
-run_install $OWNERSHIP -m 0600 Makefile ${DESTDIR}${CONFDIR}/$PRODUCT
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${CONFDIR}/$PRODUCT/Makefile
-[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}/${CONFDIR}/$PRODUCT/Makefile
+install_file Makefile ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile 0600
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
+[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
 echo "Makefile installed as ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile"
 
 #
@@ -438,7 +454,7 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 for f in lib.* ; do
     if [ -f $f ]; then
 	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-	echo "Library ${f#*.} file installed as ${DESTDIR}/${SHAREDIR}/$PRODUCT/$f"
+	echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
     fi
 done
 
@@ -451,7 +467,7 @@ echo "Common functions linked through ${DESTDIR}${SHAREDIR}/$PRODUCT/functions"
 #
 
 install_file shorecap ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap 0755
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${LIBEXECDIR}/$PRODUCT/shorecap
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap
 
 echo
 echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap"
@@ -461,17 +477,17 @@ echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shor
 #
 
 if [ -f modules ]; then
-    run_install $OWNERSHIP -m 0600 modules ${DESTDIR}${SHAREDIR}/$PRODUCT
+    install_file modules ${DESTDIR}${SHAREDIR}/$PRODUCT/modules 0600
     echo "Modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/modules"
 fi
 
 if [ -f helpers ]; then
-    run_install $OWNERSHIP -m 0600 helpers ${DESTDIR}${SHAREDIR}/$PRODUCT
+    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 600
     echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
 fi
 
 for f in modules.*; do
-    run_install $OWNERSHIP -m 0644 $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f
+    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 644
     echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
 done
 
@@ -482,17 +498,17 @@ done
 if [ -d manpages ]; then
     cd manpages
 
-    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
+    mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
 
     for f in *.5; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
     for f in *.8; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
@@ -502,7 +518,7 @@ if [ -d manpages ]; then
 fi
 
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 644
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -533,13 +549,13 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
 	chmod 755 ${DESTDIR}${SYSCONFDIR}
     fi
 
-    run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT}
+    install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
     echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ ${SHAREDIR} != /usr/share ]; then
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/${PRODUCT}/lib.base
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SBINDIR}/$PRODUCT
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
@@ -587,6 +603,13 @@ if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${
 	else
 	    cant_autostart
 	fi
+    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+	/etc/init.d/$PRODUCT enable
+	if /etc/init.d/$PRODUCT enabled; then
+            echo "$PRODUCT will start automatically at boot"
+	else
+            cant_autostart
+	fi
     elif [ "$INITFILE" != rc.${PRODUCT} ]; then #Slackware starts this automatically
 	cant_autostart
     fi

Shorewall-lite/manpages/shorewall-lite.xml

@@ -47,6 +47,19 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>allow</option></arg>
+
+      <arg choice="plain"><replaceable>address</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -289,6 +302,20 @@
       </arg> </arg></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>reenable</option></arg>
+
+      <arg choice="plain">{ <replaceable>interface</replaceable> |
+      <replaceable>provider</replaceable> }</arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -302,6 +329,21 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>reload</option></arg>
+
+      <arg><option>-n</option></arg>
+
+      <arg><option>-p</option><arg><option>-C</option></arg></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -326,8 +368,6 @@
       <arg><option>-n</option></arg>
 
       <arg><option>-p</option><arg><option>-C</option></arg></arg>
-
-      <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -374,6 +414,17 @@
       <arg choice="opt"><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>savesets</option></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -602,7 +653,10 @@
 
     <variablelist>
       <varlistentry>
-        <term><emphasis role="bold">add</emphasis></term>
+        <term><emphasis role="bold">add </emphasis>{
+        <replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
+        <replaceable>zone</replaceable> | <replaceable>zone</replaceable>
+        <replaceable>host-list</replaceable> }</term>
 
         <listitem>
           <para>Adds a list of hosts or subnets to a dynamic zone usually used
@@ -627,7 +681,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">allow</emphasis></term>
+        <term><emphasis role="bold">allow
+        </emphasis><replaceable>address</replaceable></term>
 
         <listitem>
           <para>Re-enables receipt of packets from hosts previously
@@ -639,7 +694,25 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">clear</emphasis></term>
+        <term><emphasis role="bold">call <replaceable>function</replaceable> [
+        <replaceable>parameter</replaceable> ... ]</emphasis></term>
+
+        <listitem>
+          <para>Added in Shorewall 4.6.10. Allows you to call a function in
+          one of the Shorewall libraries or in your compiled script. function
+          must name the shell function to be called. The listed parameters are
+          passed to the function.</para>
+
+          <para>The function is first searched for in
+          <filename>lib.base</filename>, <filename>lib.common</filename> and
+          <filename>lib.cli</filename>. If it is not found, the call command
+          is passed to the generated script to be executed.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">clear
+        </emphasis>[-<option>f</option>]</term>
 
         <listitem>
           <para>Clear will remove all rules and chains installed by
@@ -650,6 +723,7 @@
           <para>If <option>-f</option> is given, the command will be processed
           by the compiled script that executed the last successful <emphasis
           role="bold">start</emphasis>, <emphasis
+          role="bold">reload</emphasis>, <emphasis
           role="bold">restart</emphasis> or <emphasis
           role="bold">refresh</emphasis> command if that script exists.</para>
         </listitem>
@@ -677,7 +751,10 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">delete</emphasis></term>
+        <term><emphasis role="bold">delete </emphasis>{
+        <replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
+        <replaceable>zone</replaceable> | <replaceable>zone</replaceable>
+        <replaceable>host-list</replaceable> }</term>
 
         <listitem>
           <para>The delete command reverses the effect of an earlier <emphasis
@@ -692,7 +769,9 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">disable</emphasis></term>
+        <term><emphasis role="bold">disable </emphasis>{
+        <replaceable>interface</replaceable> |
+        <replaceable>provider</replaceable> }</term>
 
         <listitem>
           <para>Added in Shorewall 4.4.26. Disables the optional provider
@@ -704,7 +783,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">drop</emphasis></term>
+        <term><emphasis role="bold">drop
+        </emphasis><replaceable>address</replaceable></term>
 
         <listitem>
           <para>Causes traffic from the listed <emphasis>address</emphasis>es
@@ -713,7 +793,9 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">dump</emphasis></term>
+        <term><emphasis role="bold">dump </emphasis>[-<option>x</option>]
+        [-<option>l</option>] [-<option>m</option>]
+        [-<option>c</option>]</term>
 
         <listitem>
           <para>Produces a verbose report about the firewall configuration for
@@ -734,7 +816,9 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">enable</emphasis></term>
+        <term><emphasis role="bold">enable </emphasis>{
+        <replaceable>interface</replaceable> |
+        <replaceable>provider</replaceable> }</term>
 
         <listitem>
           <para>Added in Shorewall 4.4.26. Enables the optional provider
@@ -746,7 +830,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">forget</emphasis></term>
+        <term><emphasis role="bold">forget </emphasis>[
+        <replaceable>filename</replaceable> ]</term>
 
         <listitem>
           <para>Deletes /var/lib/shorewall-lite/<emphasis>filename</emphasis>
@@ -767,7 +852,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">hits</emphasis></term>
+        <term><emphasis role="bold">hits </emphasis>
+        [-<option>t</option>]</term>
 
         <listitem>
           <para>Generates several reports from Shorewall-lite log messages in
@@ -777,7 +863,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">ipcalc</emphasis></term>
+        <term><emphasis role="bold">ipcalc </emphasis>{ address mask |
+        address/vlsm }</term>
 
         <listitem>
           <para>Ipcalc displays the network address, broadcast address,
@@ -787,7 +874,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">iprange</emphasis></term>
+        <term><emphasis role="bold">iprange
+        </emphasis><replaceable>address1</replaceable>-<replaceable>address2</replaceable></term>
 
         <listitem>
           <para>Iprange decomposes the specified range of IP addresses into
@@ -796,7 +884,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">iptrace</emphasis></term>
+        <term><emphasis role="bold">iptrace </emphasis><replaceable>iptables
+        match expression</replaceable></term>
 
         <listitem>
           <para>This is a low-level debugging command that causes iptables
@@ -815,7 +904,17 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">logdrop</emphasis></term>
+        <term><emphasis role="bold">list</emphasis></term>
+
+        <listitem>
+          <para><command>list</command> is a synonym for
+          <command>show</command> -- please see below.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">logdrop
+        </emphasis><replaceable>address</replaceable></term>
 
         <listitem>
           <para>Causes traffic from the listed <emphasis>address</emphasis>es
@@ -826,7 +925,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">logwatch</emphasis></term>
+        <term><emphasis role="bold">logwatch </emphasis>[-<option>m</option>]
+        [<replaceable>refresh-interval</replaceable>]</term>
 
         <listitem>
           <para>Monitors the log file specified by the LOGFILE option in
@@ -845,7 +945,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">logreject</emphasis></term>
+        <term><emphasis role="bold">logreject
+        </emphasis><replaceable>address</replaceable></term>
 
         <listitem>
           <para>Causes traffic from the listed <emphasis>address</emphasis>es
@@ -856,7 +957,17 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">noiptrace</emphasis></term>
+        <term><emphasis role="bold">ls</emphasis></term>
+
+        <listitem>
+          <para><command>ls</command> is a synonym for <command>show</command>
+          -- please see below.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">noiptrace </emphasis><replaceable>iptables
+        match expression</replaceable></term>
 
         <listitem>
           <para>This is a low-level debugging command that cancels a trace
@@ -908,21 +1019,39 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">reset</emphasis></term>
+        <term><emphasis role="bold">reenable</emphasis>{
+        <replaceable>interface</replaceable> |
+        <replaceable>provider</replaceable> }</term>
 
         <listitem>
-          <para>All the packet and byte counters in the firewall are
-          reset.</para>
+          <para>Added in Shorewall 4.6.9. This is equivalent to a
+          <command>disable</command> command followed by an
+          <command>enable</command> command on the specified
+          <replaceable>interface</replaceable> or
+          <replaceable>provider</replaceable>.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">restart</emphasis></term>
+        <term><emphasis role="bold">reject</emphasis><replaceable>
+        address</replaceable></term>
 
         <listitem>
-          <para>Restart is similar to <emphasis role="bold">shorewall-lite
-          start</emphasis> except that it assumes that the firewall is already
-          started. Existing connections are maintained.</para>
+          <para>Causes traffic from the listed <emphasis>address</emphasis>es
+          to be silently rejected.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">reload </emphasis>[-n] [-p]
+        [-<option>C</option>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.0, <emphasis
+          role="bold">reload</emphasis> is similar to <emphasis
+          role="bold">shorewall-lite start</emphasis> except that it assumes
+          that the firewall is already started. Existing connections are
+          maintained.</para>
 
           <para>The <option>-n</option> option causes Shorewall-lite to avoid
           updating the routing table(s).</para>
@@ -940,7 +1069,46 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">restore</emphasis></term>
+        <term><emphasis role="bold">reset [<replaceable>chain</replaceable>,
+        ...]</emphasis><acronym/></term>
+
+        <listitem>
+          <para>Resets the packet and byte counters in the specified
+          <replaceable>chain</replaceable>(s). If no
+          <replaceable>chain</replaceable> is specified, all the packet and
+          byte counters in the firewall are reset.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">restart </emphasis>[-n] [-p]
+        [-<option>C</option>]</term>
+
+        <listitem>
+          <para>Beginning with Shorewall 5.0.0, this command performs a true
+          restart. The firewall is completely stopped as if a
+          <command>stop</command> command had been issued then it is started
+          again.</para>
+
+          <para>The <option>-n</option> option causes Shorewall-lite to avoid
+          updating the routing table(s).</para>
+
+          <para>The <option>-p</option> option causes the connection tracking
+          table to be flushed; the <command>conntrack</command> utility must
+          be installed to use this option.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
+          If the specified (or implicit) firewall script is the one that
+          generated the current running configuration, then the running
+          netfilter configuration will be reloaded as is so as to preserve the
+          iptables packet and byte counters.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">restore </emphasis>[-<option>n</option>]
+        [-<option>p</option>] [-<option>C</option>] [
+        <replaceable>filename</replaceable> ]</term>
 
         <listitem>
           <para>Restore Shorewall-lite to a state saved using the <emphasis
@@ -960,6 +1128,14 @@
             different from the current values.</para>
           </caution>
 
+          <para>The <option>-n</option> option causes Shorewall to avoid
+          updating the routing table(s).</para>
+
+          <para>The <option>-p</option> option, added in Shorewall 4.6.5,
+          causes the connection tracking table to be flushed; the
+          <command>conntrack</command> utility must be installed to use this
+          option.</para>
+
           <para>The <option>-C</option> option was added in Shorewall 4.6.5.
           If the <option>-C</option> option was specified during <emphasis
           role="bold">shorewall save</emphasis>, then the counters saved by
@@ -968,7 +1144,9 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">run</emphasis></term>
+        <term><emphasis role="bold">run
+        </emphasis><replaceable>command</replaceable> [
+        <replaceable>parameter</replaceable> ... ]</term>
 
         <listitem>
           <para>Added in Shorewall 4.6.3. Executes
@@ -985,7 +1163,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">save</emphasis></term>
+        <term><emphasis role="bold">save </emphasis>[-<option>C</option>] [
+        <replaceable>filename</replaceable> ]</term>
 
         <listitem>
           <para>The dynamic blacklist is stored in
@@ -1002,6 +1181,20 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">savesets</emphasis></term>
+
+        <listitem>
+          <para>Added in shorewall 4.6.8. Performs the same action as the
+          <command>stop</command> command with respect to saving ipsets (see
+          the SAVE_IPSETS option in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink> (5)).
+          This command may be used to proactively save your ipset contents in
+          the event that a system failure occurs prior to issuing a
+          <command>stop</command> command.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">show</emphasis></term>
 
@@ -1011,7 +1204,8 @@
 
           <variablelist>
             <varlistentry>
-              <term><emphasis role="bold">bl|blacklists</emphasis></term>
+              <term><emphasis role="bold">bl|blacklists
+              </emphasis>[-<option>x</option>]</term>
 
               <listitem>
                 <para>Added in Shorewall 4.6.2. Displays the dynamic chain
@@ -1024,7 +1218,8 @@
             </varlistentry>
 
             <varlistentry>
-              <term><emphasis role="bold">capabilities</emphasis></term>
+              <term>[-<option>f</option>] <emphasis
+              role="bold">capabilities</emphasis></term>
 
               <listitem>
                 <para>Displays your kernel/iptables capabilities. The
@@ -1035,8 +1230,10 @@
             </varlistentry>
 
             <varlistentry>
-              <term>[ [ <option>chain</option> ] <emphasis>chain</emphasis>...
-              ]</term>
+              <term>[-<option>b</option>] [-<option>x</option>]
+              [-<option>l</option>] [-<option>t</option>
+              {<option>filter</option>|<option>mangle</option>|<option>nat</option>|<option>raw</option>|<option>rawpost</option>}]
+              [ <emphasis>chain</emphasis>... ]</term>
 
               <listitem>
                 <para>The rules in each <emphasis>chain</emphasis> are
@@ -1089,11 +1286,19 @@
             </varlistentry>
 
             <varlistentry>
-              <term><emphasis role="bold">connections</emphasis></term>
+              <term><emphasis role="bold">connections
+              [<replaceable>filter_parameter</replaceable>
+              ...]</emphasis></term>
 
               <listitem>
                 <para>Displays the IP connections currently being tracked by
                 the firewall.</para>
+
+                <para>If the <command>conntrack</command> utility is
+                installed, beginning with Shorewall 4.6.11 the set of
+                connections displayed can be limited by including conntrack
+                filter parameters (-p , -s, --dport, etc). See conntrack(8)
+                for details.</para>
               </listitem>
             </varlistentry>
 
@@ -1135,7 +1340,8 @@
             </varlistentry>
 
             <varlistentry>
-              <term><emphasis role="bold">log</emphasis></term>
+              <term>[-<option>m</option>] <emphasis
+              role="bold">log</emphasis></term>
 
               <listitem>
                 <para>Displays the last 20 Shorewall-lite messages from the
@@ -1147,6 +1353,20 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term>[-<option>x</option>] <emphasis
+              role="bold">mangle</emphasis></term>
+
+              <listitem>
+                <para>Displays the Netfilter mangle table using the command
+                <emphasis role="bold">iptables -t mangle -L -n -v</emphasis>.
+                The <emphasis role="bold">-x</emphasis> option is passed
+                directly through to iptables and causes actual packet and byte
+                counts to be displayed. Without this option, those counts are
+                abbreviated.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">marks</emphasis></term>
 
@@ -1237,7 +1457,9 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">start</emphasis></term>
+        <term><emphasis role="bold">start</emphasis> [-<option>p</option>]
+        [-<option>n</option>] [<option>-f</option>]
+        [-<option>C</option>]</term>
 
         <listitem>
           <para>Start Shorewall Lite. Existing connections through
@@ -1249,7 +1471,7 @@
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
 
-          <para>The <option>-m</option> option prevents the firewall script
+          <para>The <option>-n</option> option prevents the firewall script
           from modifying the current routing configuration.</para>
 
           <para>The <option>-f</option> option was added in Shorewall 4.6.5.

Shorewall-lite/shorewall-lite.conf

@@ -1,5 +1,5 @@
 ###############################################################################
-#  /etc/shorewall-lite/shorewall-lite.conf Version 4 - Change the following
+#  /etc/shorewall-lite/shorewall-lite.conf Version 5 - Change the following
 #  variables to override the values in the shorewall.conf file used to
 #  compile /var/lib/shorewall-lite/firewall. Those values may be found in
 #  /var/lib/shorewall-lite/firewall.conf.

Shorewall-lite/shorewall-lite.service

@@ -5,6 +5,7 @@
 #
 [Unit]
 Description=Shorewall IPv4 firewall (lite)
+Wants=network-online.target
 After=network-online.target
 Conflicts=iptables.service firewalld.service
 

Shorewall-lite/shorewall-lite.service.214

@@ -5,6 +5,7 @@
 #
 [Unit]
 Description=Shorewall IPv4 firewall (lite)
+Wants=network-online.target
 After=network-online.target
 Conflicts=iptables.service firewalld.service
 

Shorewall-lite/shorewall-lite.service.debian

@@ -0,0 +1,23 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
+#
+[Unit]
+Description=Shorewall IPv4 firewall (lite)
+Wants=network-online.target
+After=network-online.target
+Conflicts=iptables.service firewalld.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/default/shorewall-lite
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
+ExecStop=/sbin/shorewall-lite $OPTIONS stop
+ExecReload=/sbin/shorewall-lite $OPTIONS reload $RELOADOPTIONS
+
+[Install]
+WantedBy=basic.target

Shorewall-lite/uninstall.sh

@@ -40,6 +40,12 @@ usage() # $1 = exit status
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
 qt()
 {
     "$@" >/dev/null 2>&1
@@ -162,7 +168,15 @@ if [ $configure -eq 1 ]; then
 fi
 
 if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
-    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
+    if [ $HOST = openwrt ]; then
+	if [ $configure -eq 1 ] && /etc/init.d/shorewall-lite enabled; then
+	    /etc/init.d/shorewall-lite disable
+	fi
+	
+	FIREWALL=$(readlink ${SHAREDIR}/shorewall-lite/init)
+    else
+	FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
+    fi
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
 fi
@@ -181,9 +195,11 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-if [ -n "$SYSTEMD" ]; then
+[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
+
+if [ -n "$SERVICEDIR" ]; then
     [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
-    rm -f $SYSTEMD/shorewall-lite.service
+    rm -f $SERVICEDIR/shorewall-lite.service
 fi
 
 rm -f ${SBINDIR}/shorewall-lite
@@ -193,6 +209,7 @@ rm -rf ${VARDIR}/shorewall-lite
 rm -rf ${SHAREDIR}/shorewall-lite
 rm -rf ${LIBEXECDIR}/shorewall-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
+rm -f  ${SYSCONFDIR}/shorewall-lite
 
 rm -f ${MANDIR}/man5/shorewall-lite*
 rm -f ${MANDIR}/man8/shorewall-lite*

Shorewall/INSTALL

@@ -1,4 +1,4 @@
-Shoreline Firewall (Shorewall) Version 4
+Shoreline Firewall (Shorewall) Version 5
 -----         ----
 
 -----------------------------------------------------------------------------

Shorewall/Macros/macro.AMQP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - AMQP Macro
+# Shorewall - AMQP Macro
 #
 # /usr/share/shorewall/macro.AMQP
 #
 #	This macro handles AMQP traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5672

Shorewall/Macros/macro.A_AllowICMPs

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - Audited AllowICMPs Macro
+# Shorewall - Audited AllowICMPs Macro
 #
 # /usr/share/shorewall/macro.A_AllowICMPs
 #
 #	This macro A_ACCEPTs needed ICMP types
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION		SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #					PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.A_DropDNSrep

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - Audited DropDNSrep Macro
+# Shorewall - Audited DropDNSrep Macro
 #
 # /usr/share/shorewall/macro.A_DropDNSrep
 #
 #	This macro silently audites and drops DNS UDP replies
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.A_DropUPnP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - ADropUPnP Macro
+# Shorewall - ADropUPnP Macro
 #
 # /usr/share/shorewall/macro.A_DropUPnP
 #
 #	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.ActiveDir

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - Samba 4 Macro
+# Shorewall - Samba 4 Macro
 #
 # /usr/share/shorewall/macro.ActiveDir
 #
@@ -9,8 +9,6 @@
 #
 #
 ###############################################################################
-?FORMAT 2 
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM   -       -       tcp     389 	#LDAP services

Shorewall/Macros/macro.AllowICMPs

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - AllowICMPs Macro
+# Shorewall - AllowICMPs Macro
 #
 # /usr/share/shorewall/macro.AllowICMPs
 #
 #	This macro ACCEPTs needed ICMP types
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.Amanda

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - Amanda Macro
+# Shorewall - Amanda Macro
 #
 # /usr/share/shorewall/macro.Amanda
 #
@@ -8,8 +8,6 @@
 #	files from those nodes.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.Auth

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - Auth Macro
+# Shorewall - Auth Macro
 #
 # /usr/share/shorewall/macro.Auth
 #
 #	This macro handles Auth (identd) traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	113

Shorewall/Macros/macro.BGP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - BGP Macro
+# Shorewall - BGP Macro
 #
 # /usr/share/shorewall/macro.BGP
 #
 #	This macro handles BGP4 traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	179	# BGP4

Shorewall/Macros/macro.BLACKLIST

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - blacklist Macro
+# Shorewall - blacklist Macro
 #
 # /usr/share/shorewall/macro.blacklist
 #
 #	This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if $BLACKLIST_LOGLEVEL

Shorewall/Macros/macro.BitTorrent

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - BitTorrent Macro
+# Shorewall - BitTorrent Macro
 #
 # /usr/share/shorewall/macro.BitTorrent
 #
@@ -9,8 +9,6 @@
 #	BitTorrent32 macro.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6889

Shorewall/Macros/macro.BitTorrent32

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - BitTorrent 3.2 Macro
+# Shorewall - BitTorrent 3.2 Macro
 #
 # /usr/share/shorewall/macro.BitTorrent32
 #
 #	This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6999

Shorewall/Macros/macro.CVS

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - CVS Macro
+# Shorewall - CVS Macro
 #
 # /usr/share/shorewall/macro.CVS
 #
 #	This macro handles connections to the CVS pserver.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2401

Shorewall/Macros/macro.Citrix

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - Citrix/ICA Macro
+# Shorewall - Citrix/ICA Macro
 #
 # /usr/share/shorewall/macro.Citrix
 #
@@ -7,8 +7,6 @@
 #	ICA Session Reliability)
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1494	# ICA

Shorewall/Macros/macro.DAAP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - DAAP Macro
+# Shorewall - DAAP Macro
 #
 # /usr/share/shorewall/macro.DAAP
 #
@@ -7,8 +7,6 @@
 #	The protocol is used by iTunes, Rythmbox and other similar daemons.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3689

Shorewall/Macros/macro.DCC

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - DCC Macro
+# Shorewall - DCC Macro
 #
 # /usr/share/shorewall/macro.DCC
 #
@@ -7,8 +7,6 @@
 #	DCC is a distributed spam filtering mechanism.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	6277

Shorewall/Macros/macro.DHCPfwd

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - DHCPfwd Macro
+# Shorewall - DHCPfwd Macro
 #
 # /usr/share/shorewall/macro.DHCPfwd
 #
 #	This macro (bidirectional) handles forwarded DHCP traffic
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	67:68	67:68	# DHCP

Shorewall/Macros/macro.DNS

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - DNS Macro
+# Shorewall - DNS Macro
 #
 # /usr/share/shorewall/macro.DNS
 #
 #	This macro handles DNS traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	53

Shorewall/Macros/macro.Distcc

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - Distcc Macro
+# Shorewall - Distcc Macro
 #
 # /usr/share/shorewall/macro.Distcc
 #
 #	This macro handles connections to the Distributed Compiler service.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3632

Shorewall/Macros/macro.Drop

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - Drop Macro
+# Shorewall - Drop Macro
 #
 # /usr/share/shorewall/macro.Drop
 #
@@ -11,8 +11,6 @@
 #		Drop	net	all
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 #

Shorewall/Macros/macro.DropDNSrep

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - DropDNSrep Macro
+# Shorewall - DropDNSrep Macro
 #
 # /usr/share/shorewall/macro.DropDNSrep
 #
 #	This macro silently drops DNS UDP replies
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.DropUPnP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - DropUPnP Macro
+# Shorewall - DropUPnP Macro
 #
 # /usr/share/shorewall/macro.DropUPnP
 #
 #	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.Edonkey

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - Edonkey Macro
+# Shorewall - Edonkey Macro
 #
 # /usr/share/shorewall/macro.Edonkey
 #
@@ -28,8 +28,6 @@
 #	applications such as aMule WebServer or aMuleCMD.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	4662

Shorewall/Macros/macro.FTP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - FTP Macro
+# Shorewall - FTP Macro
 #
 # /usr/share/shorewall/macro.FTP
 #
 #	This macro handles FTP traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __FTP_HELPER  )

Shorewall/Macros/macro.Finger

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - Finger Macro
+# Shorewall - Finger Macro
 #
 # /usr/share/shorewall/macro.Finger
 #
@@ -7,8 +7,6 @@
 #	your finger information to internet.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	79

Shorewall/Macros/macro.GNUnet

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - GNUnet Macro
+# Shorewall - GNUnet Macro
 #
 # /usr/share/shorewall/macro.GNUnet
 #
 #	This macro handles GNUnet (secure peer-to-peer networking) traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2086

Shorewall/Macros/macro.GRE

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - GRE Macro
+# Shorewall - GRE Macro
 #
 # /usr/share/shorewall/macro.GRE
 #
@@ -7,8 +7,6 @@
 #	traffic (RFC 1701)
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	47	# GRE

Shorewall/Macros/macro.Git

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - Git Macro
+# Shorewall - Git Macro
 #
 # /usr/share/shorewall/macro.Git
 #
 #	This macro handles Git traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9418

Shorewall/Macros/macro.Gnutella

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - Gnutella Macro
+# Shorewall - Gnutella Macro
 #
 # /usr/share/shorewall/macro.Gnutella
 #
 #	This macro handles Gnutella traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6346

Shorewall/Macros/macro.Goto-Meeting

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - Citrix/Goto Meeting macro
+# Shorewall - Citrix/Goto Meeting macro
 #
 # /usr/share/shorewall/macro.Goto-Meeting
 #          by Eric Teeter
@@ -7,8 +7,6 @@
 #       Assumes that ports 80 and 443 are already open
 #       If needed, use the macros that open Http and Https to reduce redundancy
 ####################################################################################
-?FORMAT 2
-####################################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM      -    -       tcp     8200    # Goto Meeting only needed (TCP outbound)

Shorewall/Macros/macro.HKP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - HKP Macro
+# Shorewall - HKP Macro
 #
 # /usr/share/shorewall/macro.HKP
 #
 #	This macro handles OpenPGP HTTP keyserver protocol traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	11371

Shorewall/Macros/macro.HTTP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - HTTP Macro
+# Shorewall - HTTP Macro
 #
 # /usr/share/shorewall/macro.HTTP
 #
 #	This macro handles plaintext HTTP (WWW) traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	80

Shorewall/Macros/macro.HTTPS

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - HTTPS Macro
+# Shorewall - HTTPS Macro
 #
 # /usr/share/shorewall/macro.HTTPS
 #
 #	This macro handles HTTPS (WWW over SSL) traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	443

Shorewall/Macros/macro.ICPV2

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - ICPV2 Macro
+# Shorewall - ICPV2 Macro
 #
 # /usr/share/shorewall/macro.ICPV2
 #
 #	This macro handles Internet Cache Protocol V2 (Squid) traffic
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	3130

Shorewall/Macros/macro.ICQ

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - ICQ Macro
+# Shorewall - ICQ Macro
 #
 # /usr/share/shorewall/macro.ICQ
 #
 #	This macro handles ICQ, now called AOL Instant Messenger (or AIM).
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5190

Shorewall/Macros/macro.ILO

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - ILO Macro
+# Shorewall - ILO Macro
 #
 # /usr/share/shorewall/macro.ILO
 #
@@ -8,8 +8,6 @@
 #	workstations.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3002		# Raw serial data

Shorewall/Macros/macro.IMAP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - IMAP Macro
+# Shorewall - IMAP Macro
 #
 # /usr/share/shorewall/macro.IMAP
 #
@@ -7,8 +7,6 @@
 #	see macro.IMAPS.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	143

Shorewall/Macros/macro.IMAPS

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - IMAPS Macro
+# Shorewall - IMAPS Macro
 #
 # /usr/share/shorewall/macro.IMAPS
 #
@@ -7,8 +7,6 @@
 #	(not recommended), see macro.IMAP.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	993

Shorewall/Macros/macro.IPIP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - IPIP Macro
+# Shorewall - IPIP Macro
 #
 # /usr/share/shorewall/macro.IPIP
 #
 #	This macro (bidirectional) handles IPIP capsulation traffic
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	94	# IPIP

Shorewall/Macros/macro.IPMI

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - IPMI Macro
+# Shorewall - IPMI Macro
 #
 # /usr/share/shorewall/macro.IPMI
 #
@@ -9,8 +9,6 @@
 #	workstations.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	623		# RMCP

Shorewall/Macros/macro.IPP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 3.2 - IPP Macro
+# Shorewall - IPP Macro
 #
 # /usr/share/shorewall/macro.IPP
 #
 #	This macro handles Internet Printing Protocol (IPP).
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	631

Shorewall/Macros/macro.IPPbrd

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - IPP Broadcast Macro
+# Shorewall - IPP Broadcast Macro
 #
 # /usr/share/shorewall/macro.IPPbrd
 #
@@ -8,8 +8,6 @@
 #       direction, use the IPPserver Macro
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	631

Shorewall/Macros/macro.IPPserver

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - IPPserver Macro
+# Shorewall - IPPserver Macro
 #
 # /usr/share/shorewall/macro.IPPserver
 #
@@ -23,8 +23,6 @@
 #		IPPserver/ACCEPT $FW loc
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	SOURCE	DEST	tcp	631

Shorewall/Macros/macro.IPsec

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - IPsec Macro
+# Shorewall - IPsec Macro
 #
 # /usr/share/shorewall/macro.IPsec
 #
 #	This macro (bidirectional) handles IPsec traffic
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecah

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - IPsecah Macro
+# Shorewall - IPsecah Macro
 #
 # /usr/share/shorewall/macro.IPsecah
 #
@@ -7,8 +7,6 @@
 #       This is insecure. You should use ESP with encryption for security.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecnat

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - IPsecnat Macro
+# Shorewall - IPsecnat Macro
 #
 # /usr/share/shorewall/macro.IPsecnat
 #
 #	This macro (bidirectional) handles IPsec traffic and Nat-Traversal
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	# IKE

Shorewall/Macros/macro.IRC

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 IRC Macro
+# Shorewall IRC Macro
 #
 # /usr/share/shorewall/macro.IRC
 #
 #	This macro handles IRC traffic (Internet Relay Chat).
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.JAP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - JAP Macro
+# Shorewall - JAP Macro
 #
 # /usr/share/shorewall/macro.JAP
 #
@@ -8,8 +8,6 @@
 #	to browse anonymously!
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	8080 # HTTP port

Shorewall/Macros/macro.Jabber

@@ -0,0 +1,11 @@
+#
+# Shorewall - Jabber Macro
+#
+# /usr/share/shorewall/macro.Jabber
+#
+#	This macro accepts Jabber traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	5222

Shorewall/Macros/macro.JabberPlain

@@ -1,13 +1,12 @@
 #
-# Shorewall version 3.4 - JabberPlain Macro
+# Shorewall - JabberPlain Macro
 #
 # /usr/share/shorewall/macro.JabberPlain
 #
-#	This macro accepts Jabber traffic (plaintext).
+#	This macro accepts Jabber traffic (plaintext). This macro is
+#	deprecated - use of macro.Jabber instead is recommended.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
-PARAM	-	-	tcp	5222
+Jabber

Shorewall/Macros/macro.JabberSecure

@@ -1,13 +1,13 @@
 #
-# Shorewall version 3.4 - JabberSecure (ssl) Macro
+# Shorewall - JabberSecure (SSL) Macro
 #
 # /usr/share/shorewall/macro.JabberSecure
 #
-#	This macro accepts Jabber traffic (ssl).
+#	This macro accepts Jabber traffic (SSL). Use of Jabber with SSL
+#	is deprecated, please configure Jabber with STARTTLS and use
+#	Jabber macro instead.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5223

Shorewall/Macros/macro.Jabberd

@@ -1,13 +1,11 @@
 #
-# Shorewall version 3.4 - Jabberd (server intercommunication)
+# Shorewall - Jabberd (server intercommunication)
 #
 # /usr/share/shorewall/macro.Jabberd
 #
 #	This macro accepts Jabberd intercommunication traffic
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5269

Shorewall/Macros/macro.Jetdirect

@@ -1,13 +1,11 @@
 #
-# Shorewall version 3.2 - Jetdirect Macro
+# Shorewall - Jetdirect Macro
 #
 # /usr/share/shorewall/macro.Jetdirect
 #
 #	This macro handles HP Jetdirect printing.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9100

Shorewall/Macros/macro.Kerberos

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - Kerberos Macro
+# Shorewall - Kerberos Macro
 #
 # /usr/share/shorewall/macro.Kerberos
 #
 #	This macro handles Kerberos traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	88

Shorewall/Macros/macro.L2TP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - L2TP Macro
+# Shorewall - L2TP Macro
 #
 # /usr/share/shorewall/macro.L2TP
 #
@@ -7,8 +7,6 @@
 #	(RFC 2661)
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	1701	# L2TP

Shorewall/Macros/macro.LDAP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - LDAP Macro
+# Shorewall - LDAP Macro
 #
 # /usr/share/shorewall/macro.LDAP
 #
@@ -11,8 +11,6 @@
 #	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	389

Shorewall/Macros/macro.LDAPS

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - LDAPS Macro
+# Shorewall - LDAPS Macro
 #
 # /usr/share/shorewall/macro.LDAPS
 #
@@ -11,8 +11,6 @@
 #	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	636

Shorewall/Macros/macro.MSNP

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - MSNP Macro
+# Shorewall - MSNP Macro
 #
 # /usr/share/shorewall/macro.MSNP
 #
 #	This macro handles MSNP (MicroSoft Notification Protocol)
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1863

Shorewall/Macros/macro.MSSQL

@@ -1,13 +1,12 @@
 #
-# Shorewall version 4 - MSSQL Macro
+# Shorewall - MSSQL Macro
 #
 # /usr/share/shorewall/macro.MSSQL
 #
 #	This macro handles MSSQL (Microsoft SQL Server)
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1433
+PARAM	-	-	udp	1434

Shorewall/Macros/macro.Mail

@@ -1,5 +1,5 @@
 #
-# Shorewall version 4 - Mail Macro
+# Shorewall - Mail Macro
 #
 # /usr/share/shorewall/macro.Mail
 #
@@ -12,8 +12,6 @@
 #	the POP3 or IMAP macros.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	25

Shorewall/Macros/macro.MongoDB

@@ -1,13 +1,11 @@
 #
-# Shorewall version 4 - MongoDB Macro
+# Shorewall - MongoDB Macro
 #
 # /usr/share/shorewall/macro.MongoDB
 #
 #	This macro handles MongoDB Daemon/Router traffic.
 #
 ###############################################################################
-?FORMAT 2
-###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	27017