Reinstate IPv6 DropSmurfs

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/INSTALL

@@ -1,4 +1,4 @@
-Shoreline Firewall (Shorewall) Version 5
+Shoreline Firewall (Shorewall) Version 4
 -----         ----
 
 -----------------------------------------------------------------------------

Shorewall-core/configure

@@ -28,7 +28,7 @@
 #
 # Build updates this
 #
-VERSION=4.6.12
+VERSION=4.5.2.1
 
 case "$BASH_VERSION" in
     [4-9].*)
@@ -102,7 +102,7 @@ if [ -z "$vendor" ]; then
 		vendor=redhat
 		;;
 	    debian|ubuntu)
-		ls -l /sbin/init |fgrep -q systemd | vendor=debian.systemd | vendor=debian.sysvinit
+		vendor=debian
 		;;
 	    opensuse)
 		vendor=suse
@@ -130,7 +130,7 @@ if [ -z "$vendor" ]; then
 	*)
 	    if [ -f /etc/debian_version ]; then
 		params[HOST]=debian
-		rcfile=shorewallrc.debian.sysvinit
+		rcfile=shorewallrc.debian
 	    elif [ -f /etc/redhat-release ]; then
 		params[HOST]=redhat
 		rcfile=shorewallrc.redhat
@@ -195,10 +195,6 @@ elif [ -n "${options[VARDIR]}" ]; then
     fi
 fi
 
-if [ -z "${options[SERVICEDIR]}" ]; then
-    options[SERVICEDIR]="${options[SYSTEMD]}"
-fi
-
 for on in \
     HOST \
     PREFIX \
@@ -213,7 +209,7 @@ for on in \
     INITFILE \
     AUXINITSOURCE \
     AUXINITFILE \
-    SERVICEDIR \
+    SYSTEMD \
     SERVICEFILE \
     SYSCONFFILE \
     SYSCONFDIR \

Shorewall-core/configure.pl

@@ -31,7 +31,7 @@ use strict;
 # Build updates this
 #
 use constant {
-    VERSION => '4.6.12'
+    VERSION => '4.5.2.1'
 };
 
 my %params;
@@ -68,16 +68,14 @@ unless ( defined $vendor ) {
 	    $vendor = 'redhat';
 	} elsif ( $id eq 'opensuse' ) {
 	    $vendor = 'suse';
-	} elsif ( $id eq 'ubuntu' || $id eq 'debian' ) {
+	} elsif ( $id eq 'ubuntu' ) {
-	    my $init = `ls -l /sbin/init`;
+	    $vendor = 'debian';
-	    $vendor = $init =~ /systemd/ ? 'debian.systemd' : 'debian.sysvinit';
 	} else {
 	    $vendor = $id;
 	}
     }
 
     $params{HOST} = $vendor;
-    $params{HOST} =~ s/\..*//;
 }
 
 if ( defined $vendor ) {
@@ -86,7 +84,7 @@ if ( defined $vendor ) {
 } else {
     if ( -f '/etc/debian_version' ) {
 	$vendor = 'debian';
-	$rcfilename = 'shorewallrc.debian.sysvinit';
+	$rcfilename = 'shorewallrc.debian';
     } elsif ( -f '/etc/redhat-release' ){
 	$vendor = 'redhat';
 	$rcfilename = 'shorewallrc.redhat';
@@ -119,7 +117,7 @@ my @abbr = qw( Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec );
 if ( $vendor eq 'linux' ) {
     printf "INFO: Creating a generic Linux installation - %s %2d %04d %02d:%02d:%02d\n\n", $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
 } else {
-    printf "INFO: Creating a %s-specific installation - %s %2d %04d %02d:%02d:%02d\n\n", $params{HOST}, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
+    printf "INFO: Creating a %s-specific installation - %s %2d %04d %02d:%02d:%02d\n\n", $vendor, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
 }
 
 open $rcfile, '<', $rcfilename or die "Unable to open $rcfilename for input: $!";
@@ -156,8 +154,6 @@ if ( $options{VARLIB} ) {
     $options{VARDIR} = '${VARLIB}/${PRODUCT}';
 }
 
-$options{SERVICEDIR}=$options{SYSTEMD} unless $options{SERVICEDIR};
-
 for ( qw/ HOST
 	  PREFIX
 	  SHAREDIR
@@ -171,7 +167,7 @@ for ( qw/ HOST
 	  INITFILE
 	  AUXINITSOURCE
 	  AUXINITFILE
-	  SERVICEDIR
+	  SYSTEMD
           SERVICEFILE
 	  SYSCONFFILE
 	  SYSCONFDIR

Shorewall-core/install.sh

@@ -329,13 +329,9 @@ if [ -n "${SYSCONFDIR}" ]; then
     chmod 755 ${DESTDIR}${SYSCONFDIR}
 fi
 
-if [ -z "${SERVICEDIR}" ]; then
+if [ -n "${SYSTEMD}" ]; then
-    SERVICEDIR="$SYSTEMD"
+    mkdir -p ${DESTDIR}${SYSTEMD}
-fi
+    chmod 755 ${DESTDIR}${SYSTEMD}
-
-if [ -n "${SERVICEDIR}" ]; then
-    mkdir -p ${DESTDIR}${SERVICEDIR}
-    chmod 755 ${DESTDIR}${SERVICEDIR}
 fi
 
 mkdir -p ${DESTDIR}${SBINDIR}

Shorewall-core/lib.base

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.base
+# Shorewall 4.5 -- /usr/share/shorewall/lib.base
 #
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -75,24 +75,6 @@ elif [ -z "${VARDIR}" ]; then
     VARDIR="${VARLIB}/${PRODUCT}"
 fi
 
-#
-# Fatal Error
-#
-fatal_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 2
-}
-
-#
-# Not configured Error
-#
-not_configured_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 6
-}
-
 #
 # Conditionally produce message
 #

Shorewall-core/lib.cli

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.cli.
+# Shorewall 4.5 -- /usr/share/shorewall/lib.cli.
 #
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -25,7 +25,7 @@
 # loaded after this one and replaces some of the functions declared here.
 #
 
-SHOREWALL_CAPVERSION=40609
+SHOREWALL_CAPVERSION=40600
 
 [ -n "${g_program:=shorewall}" ]
 
@@ -42,6 +42,16 @@ fi
 
 . ${SHAREDIR}/shorewall/lib.base
 
+
+#
+# Fatal Error
+#
+fatal_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 2
+}
+
 #
 # Issue an error message and die
 #
@@ -357,28 +367,6 @@ resolve_arptables() {
     esac
 }
 
-#
-# Try to run the 'savesets' command
-#
-savesets() {
-    local supported
-
-    supported=$(run_it ${VARDIR}/firewall help | fgrep savesets )
-
-    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${g_restorepath}-ipsets 
-}
-
-#
-# Proactive save of the current ipset contents
-#
-savesets1() {
-    local supported
-
-    supported=$(run_it ${VARDIR}/firewall help | fgrep savesets )
-
-    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${VARDIR}/ipsets.save && progress_message3 "The ipsets have been saved to ${VARDIR}/ipsets.save"
-}
-
 #
 # Save currently running configuration
 #
@@ -388,7 +376,7 @@ do_save() {
     status=0
 
     if [ -f ${VARDIR}/firewall ]; then
-	if $iptables_save | grep -v -- '-A dynamic.* -j ACCEPT' > ${VARDIR}/restore-$$; then
+	if $iptables_save | iptablesbug > ${VARDIR}/restore-$$; then
 	    cp -f ${VARDIR}/firewall $g_restorepath
 	    mv -f ${VARDIR}/restore-$$ ${g_restorepath}-iptables
 	    chmod +x $g_restorepath
@@ -409,7 +397,10 @@ do_save() {
 	    resolve_arptables
 
 	    if [ -n "$arptables" ]; then
-		if ${arptables}-save > ${VARDIR}/restore-$$; then
+	        #
+	        # 'sed' command is a hack to work around broken arptables_jf
+	        #
+		if ${arptables}-save | sed 's/-p[[:space:]]\+0\([[:digit:]]\)00\/ffff/-p 000\1\/ffff/' > ${VARDIR}/restore-$$; then
 		    if grep -q '^-A' ${VARDIR}/restore-$$; then
 			mv -f ${VARDIR}/restore-$$ ${g_restorepath}-arptables
 		    else
@@ -437,7 +428,7 @@ do_save() {
 	    ;;
     esac
 
-    if ! savesets;  then
+    if ! run_it ${VARDIR}/firewall savesets ${g_restorepath}-ipsets; then
 	case ${SAVE_IPSETS:=No} in
 	    [Yy]es)
 		case ${IPSET:=ipset} in
@@ -454,7 +445,16 @@ do_save() {
 		esac
 
 		if [ -n "$IPSET" ]; then
-		    if eval $IPSET -S > ${VARDIR}/ipsets.tmp; then
+		    if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then
+			#
+			# The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny
+			#
+			hack='| grep -v /31'
+		    else
+			hack=
+		    fi
+
+		    if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then
 			#
 			# Don't save an 'empty' file
 			#
@@ -462,7 +462,7 @@ do_save() {
 		    fi
 		fi
 		;;
-	    [Nn]o|ipv4|ipv6)
+	    [Nn]o)
 		;;
 	    *)
 		error_message "WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS"
@@ -482,8 +482,6 @@ save_config() {
 
     [ -x $iptables_save ] || echo "$iptables-save does not exist or is not executable" >&2
 
-    [ -n "$g_counters" ] && iptables_save="$iptables_save --counters"
-
     if product_is_started ; then
 	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}
 
@@ -969,6 +967,8 @@ show_command() {
 
     case "$1" in
 	connections)
+	    [ $# -gt 1 ] && usage 1
+
 	    if [ $g_family -eq 4 ]; then
 		if [ -d /proc/sys/net/netfilter/ ]; then
 		    local count
@@ -983,10 +983,8 @@ show_command() {
 		echo
 
 		if qt mywhich conntrack ; then
-		    shift
+		    conntrack -f ipv${g_family} -L | show_connections_filter
-		    conntrack -f ipv4 -L $@ | show_connections_filter
 		else
-		    [ $# -gt 1 ] && usage 1
 		    if [ -f /proc/net/ip_conntrack ]; then
 			cat /proc/net/ip_conntrack | show_connections_filter
 		    else
@@ -994,12 +992,10 @@ show_command() {
 		    fi
 	        fi
 	    elif qt mywhich conntrack ; then
-		shift
 		echo "$g_product $SHOREWALL_VERSION Connections at $g_hostname - $(date)"
 		echo
-		conntrack -f ipv6 -L $@ | show_connections_filter
+		conntrack -f ipv6 -L | show_connections_filter
 	    else
-		[ $# -gt 1 ] && usage 1
 		local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
 		local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
 		echo "$g_product $SHOREWALL_VERSION Connections ($count of $max) at $g_hostname - $(date)"
@@ -1215,16 +1211,6 @@ show_command() {
 	    echo
 	    show_bl;
 	    ;;
-	opens)
-	    [ $# -gt 1 ] && usage 1
-	    echo "$g_product $SHOREWALL_VERSION Temporarily opened connections at $g_hostname - $(date)"
-
-	    if chain_exists dynamic; then
-		g_ipt_options="$g_ipt_options --line-numbers"
-		$g_tool -t filter -L dynamic $g_ipt_options  | head -n2
-		$g_tool -t filter -L dynamic $g_ipt_options  | fgrep ACCEPT | $output_filter
-	    fi
-	    ;;
 	*)
 	    case "$g_program" in
 		*-lite)
@@ -1503,9 +1489,7 @@ do_dump_command() {
 	heading "Conntrack Table"
     fi
 
-    if qt mywhich conntrack; then
+    if [ $g_family -eq 4 ]; then
-	conntrack -f ipv${g_family} -L 2> /dev/null
-    elif [ $g_family -eq 4 ]; then
     	[ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack
     else
 	grep '^ipv6' /proc/net/nf_conntrack
@@ -1629,15 +1613,6 @@ restore_command() {
 			    g_noroutes=Yes
 			    option=${option#n}
 			    ;;
-			p*)
-			    [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system"
-			    g_purge=Yes
-			    option=${option%p}
-			    ;;
-			C*)
-			    g_counters=Yes
-			    option=${option#C}
-			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -1665,7 +1640,7 @@ restore_command() {
 
     if [ -z "$STARTUP_ENABLED" ]; then
 	error_message "ERROR: Startup is disabled"
-	exit 6
+	exit 2
     fi
 
     g_restorepath=${VARDIR}/$RESTOREFILE
@@ -1962,7 +1937,7 @@ add_command() {
 		ipset=6_${zone}_${interface};
 	    fi
 
-	    ipset=$(echo $ipset | sed 's/\./_/g');
+	    ipset=$(echo $ipset | sed 's/./_/g');
 
 	    if ! qt $IPSET -L $ipset; then
 		fatal_error "Zone $zone, interface $interface does not have a dynamic host list"
@@ -2079,166 +2054,6 @@ delete_command() {
     fi
 }
 
-open_close_command() {
-    local command
-    local desc
-    local proto
-    local icmptype
-
-    open_close_setup() {
-	[ -n "$g_nolock" ] || mutex_on
-
-	if ! product_is_started ; then
-	    [ -n "$g_nolock" ] || mutex_off
-	    fatal_error "The $COMMAND command requires the firewall to be running"
-	fi
-
-	if ! chain_exists dynamic; then
-	    [ -n "$g_nolock" ] || mutex_off
-	    fatal_error "The $COMMAND command requires DYNAMIC_BLACKLIST=Yes in the running configuration"
-	fi
-    }
-
-    [ $# -le 4 ] || fatal_error "Too many parameters"
-
-    if [ $COMMAND = open ]; then
-	[ $# -ge 2 ] || fatal_error "Too few parameters"
-    else
-	[ $# -ge 1 ] || fatal_error "Too few parameters"
-    fi
-
-    if [ $# -eq 1 ]; then
-	#
-	# close <rule number>
-	#
-	case $1 in
-	    [1-9]|[1-9][0-9]|[1-9][0-9][0-9]*)
-		;;
-	    *)
-		fatal_error "$1 is not a valid temporary open number"
-		;;
-	esac
-
-	open_close_setup #Conditionally acquires mutex
-
-	if $g_tool -L dynamic --line-numbers | grep -q "^$1 .* ACCEPT "; then
-	    if $g_tool -D dynamic $1; then
-		[ -n "$g_nolock" ] || mutex_off
-		echo "Temporary open #$1 closed"
-		return 0
-	    fi
-	    [ -n "$g_nolock" ] || mutex_off
-	    return 2
-	else
-	    [ -n "$g_nolock" ] || mutex_off
-	    fatal_error "$1 is not a valid temporary open number"
-	fi
-    else
-	if [ $1 = all ]; then
-	    command=dynamic
-	else
-	    command="dynamic -s $1"
-	fi
-
-	if [ $2 != all ]; then
-	    command="$command -d $2"
-	fi
-
-	desc="from $1 to $2"
-
-	if [ $# -ge 3 ]; then
-	    proto=$3
-
-	    [ $proto = icmp -a $g_family -eq 6 ] && proto=58
-
-	    command="$command -p $proto"
-
-	    case $3 in
-		[0-9]*)
-		    desc="$desc protocol $3"
-		    ;;
-		*)
-		    desc="$desc $3"
-		    ;;
-	    esac
-
-	    if [ $g_family -eq 4 ]; then
-		if [ $proto = 6 -o $proto = icmp ]; then
-		    proto=icmp
-		    icmptype='--icmp-type'
-		fi
-	    else
-		if [ $proto = 58 -o $proto = ipv6-icmp ]; then
-		    proto=icmp
-		    icmptype='--icmpv6-type'
-		fi
-	    fi
-	fi
-
-	if [ $# -eq 4 ]; then
-	    if [ $proto = icmp ]; then
-		case $4 in
-		    *,*)
-			fatal_error "Only a single ICMP type may be specified"
-			;;
-		    [0-9]*)
-			desc="$desc type $4"
-			;;
-		    *)
-			desc="$desc $4"
-			;;
-		esac
-
-		command="$command $icmptype $4"
-	    else
-		case $4 in
-		*,*)
-		    command="$command -m multiport --dports $4"
-		    ;;
-		*)
-		    command="$command --dport $4"
-		    ;;
-		esac
-
-		case $4 in
-		    [0-9]*,)
-			desc="$desc ports $4"
-			;;
-		    [0-9]*)
-			desc="$desc port $4"
-			;;
-		    *)
-			desc="$desc $4"
-			;;
-		esac
-	    fi
-	fi
-
-	command="$command -j ACCEPT"
-
-	open_close_setup #Conditionally acquires mutex
-
-	if [ $COMMAND = open ]; then
-	    if $g_tool -I $command ; then
-		[ -n "$g_nolock" ] || mutex_off
-		echo "Firewall dynamically opened for connections $desc"
-		return 0
-	    fi
-	    [ -n "$g_nolock" ] || mutex_off
-	    return 2
-	fi
-
-	if $g_tool -D $command 2> /dev/null; then
-	    [ -n "$g_nolock" ] || mutex_off
-	    echo "Firewall dynamically closed for connections $desc (may still be permitted by rules/policies)"
-	    return 0
-	fi
-
-	[ -n "$g_nolock" ] || mutex_off
-	fatal_error "Connections $desc are not currently opened"
-    fi
-}
-
 #
 # 'hits' commmand executor
 #
@@ -2457,7 +2272,6 @@ determine_capabilities() {
     local chain
     local chain1
     local arptables
-    local helper
 
     if [ -z "$g_tool" ]; then
 	[ $g_family -eq 4 ] && tool=iptables || tool=ip6tables
@@ -2556,9 +2370,6 @@ determine_capabilities() {
     MASQUERADE_TGT=
     UDPLITEREDIRECT=
     NEW_TOS_MATCH=
-    TARPIT_TARGET=
-    IFACE_MATCH=
-    TCPMSS_TARGET=
 
     AMANDA_HELPER=
     FTP_HELPER=
@@ -2712,12 +2523,6 @@ determine_capabilities() {
 	qt $NFACCT del $chain
     fi
 
-    qt $g_tool -A $chain -p tcp -j TARPIT && TARPIT_TARGET=Yes
-
-    qt $g_tool -A $chain -m iface --iface lo --loopback && IFACE_MATCH=Yes
-
-    qt $g_tool -A $chain -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu && TCPMSS_TARGET=Yes
-
     if [ -n "$MANGLE_ENABLED" ]; then
 	qt $g_tool -t mangle -N $chain
 
@@ -2759,44 +2564,21 @@ determine_capabilities() {
 	if qt $g_tool -t raw -A $chain -j CT --notrack; then
 	    CT_TARGET=Yes;
 
-	    for helper in amanda ftp ftp0 h323 irc irc0 netbios_ns pptp sane sane0 sip sip0 snmp tftp tftp0; do
+	    qt $g_tool -t raw -A $chain -p udp --dport 10080 -j CT --helper amanda     && AMANDA_HELPER=Yes
-		eval ${helper}_ENABLED=''
+	    qt $g_tool -t raw -A $chain -p tcp --dport 21    -j CT --helper ftp        && FTP_HELPER=Yes
-	    done
+	    qt $g_tool -t raw -A $chain -p tcp --dport 21    -j CT --helper ftp-0      && FTP0_HELPER=Yes
-
+	    qt $g_tool -t raw -A $chain -p udp --dport 1719  -j CT --helper RAS        && H323_HELPER=Yes
-	    if [ -n "$HELPERS" ]; then
+	    qt $g_tool -t raw -A $chain -p tcp --dport 6667  -j CT --helper irc        && IRC_HELPER=Yes
-		for helper in $(split_list "$HELPERS"); do
+	    qt $g_tool -t raw -A $chain -p tcp --dport 6667  -j CT --helper irc-0      && IRC0_HELPER=Yes
-		    case $helper in
+	    qt $g_tool -t raw -A $chain -p udp --dport 137   -j CT --helper netbios-ns && NETBIOS_NS_HELPER=Yes
-			none)
+	    qt $g_tool -t raw -A $chain -p tcp --dport 1729  -j CT --helper pptp       && PPTP_HELPER=Yes
-			    ;;
+	    qt $g_tool -t raw -A $chain -p tcp --dport 6566  -j CT --helper sane       && SANE_HELPER=Yes
-			amanda|ftp|ftp0|h323|irc|irc0|netbios_ns|pptp|sane|sane0|sip|sip0|snmp|tftp|tftp0)
+	    qt $g_tool -t raw -A $chain -p tcp --dport 6566  -j CT --helper sane-0     && SANE0_HELPER=Yes
-			    eval ${helper}_ENABLED=Yes
+	    qt $g_tool -t raw -A $chain -p udp --dport 5060  -j CT --helper sip        && SIP_HELPER=Yes
-			    ;;
+	    qt $g_tool -t raw -A $chain -p udp --dport 5060  -j CT --helper sip-0      && SIP0_HELPER=Yes
-			*)
+	    qt $g_tool -t raw -A $chain -p udp --dport 161   -j CT --helper snmp       && SNMP_HELPER=Yes
-			    error_message "WARNING: Invalid helper ($helper) ignored"
+	    qt $g_tool -t raw -A $chain -p udp --dport 69    -j CT --helper tftp       && TFTP_HELPER=Yes
-			    ;;
+	    qt $g_tool -t raw -A $chain -p udp --dport 69    -j CT --helper tftp-0     && TFTP0_HELPER=Yes
-		    esac
-		done
-	    else
-		for helper in amanda ftp ftp0 h323 irc irc0 netbios_ns pptp sane sane0 sip sip0 snmp tftp tftp0; do
-		    eval ${helper}_ENABLED=Yes
-		done
-	    fi
-
-	    [ -n "$amanda_ENABLED" ]     && qt $g_tool -t raw -A $chain -p udp --dport 10080 -j CT --helper amanda     && AMANDA_HELPER=Yes
-	    [ -n "$ftp_ENABLED" ]        && qt $g_tool -t raw -A $chain -p tcp --dport 21    -j CT --helper ftp        && FTP_HELPER=Yes
-	    [ -n "$ftp0_ENABLED" ]       && qt $g_tool -t raw -A $chain -p tcp --dport 21    -j CT --helper ftp-0      && FTP0_HELPER=Yes
-	    [ -n "$h323_ENABLED" ]       && qt $g_tool -t raw -A $chain -p udp --dport 1719  -j CT --helper RAS        && H323_HELPER=Yes
-	    [ -n "$irc_ENABLED" ]        && qt $g_tool -t raw -A $chain -p tcp --dport 6667  -j CT --helper irc        && IRC_HELPER=Yes
-	    [ -n "$irc0_ENABLED" ]       && qt $g_tool -t raw -A $chain -p tcp --dport 6667  -j CT --helper irc-0      && IRC0_HELPER=Yes
-	    [ -n "$netbios_ns_ENABLED" ] && qt $g_tool -t raw -A $chain -p udp --dport 137   -j CT --helper netbios-ns && NETBIOS_NS_HELPER=Yes
-	    [ -n "$pptp_ENABLED" ]       && qt $g_tool -t raw -A $chain -p tcp --dport 1729  -j CT --helper pptp       && PPTP_HELPER=Yes
-	    [ -n "$sane_ENABLED" ]       && qt $g_tool -t raw -A $chain -p tcp --dport 6566  -j CT --helper sane       && SANE_HELPER=Yes
-	    [ -n "$sane0_ENABLED" ]      && qt $g_tool -t raw -A $chain -p tcp --dport 6566  -j CT --helper sane-0     && SANE0_HELPER=Yes
-	    [ -n "$sip_ENABLED" ]        && qt $g_tool -t raw -A $chain -p udp --dport 5060  -j CT --helper sip        && SIP_HELPER=Yes
-	    [ -n "$sip0_ENABLED" ]       && qt $g_tool -t raw -A $chain -p udp --dport 5060  -j CT --helper sip-0      && SIP0_HELPER=Yes
-	    [ -n "$snmp_ENABLED" ]       && qt $g_tool -t raw -A $chain -p udp --dport 161   -j CT --helper snmp       && SNMP_HELPER=Yes
-	    [ -n "$tftp_ENABLED" ]       && qt $g_tool -t raw -A $chain -p udp --dport 69    -j CT --helper tftp       && TFTP_HELPER=Yes
-	    [ -n "$tftp0_ENABLED" ]      && qt $g_tool -t raw -A $chain -p udp --dport 69    -j CT --helper tftp-0     && TFTP0_HELPER=Yes
 	fi
 
 	qt $g_tool -t raw -F $chain
@@ -3010,17 +2792,14 @@ report_capabilities_unsorted() {
     report_capability "IMQ Target (IMQ_TARGET)" $IMQ_TARGET
     report_capability "DSCP Match (DSCP_MATCH)" $DSCP_MATCH
     report_capability "DSCP Target (DSCP_TARGET)" $DSCP_TARGET
-    report_capability "Geo IP Match (GEOIP_MATCH)" $GEOIP_MATCH
+    report_capability "Geo IP match" $GEOIP_MATCH
-    report_capability "RPFilter Match (RPFILTER_MATCH)" $RPFILTER_MATCH
+    report_capability "RPFilter match" $RPFILTER_MATCH
-    report_capability "NFAcct Match" $NFACCT_MATCH
+    report_capability "NFAcct match" $NFACCT_MATCH
-    report_capability "Checksum Target (CHECKSUM_TARGET)" $CHECKSUM_TARGET
+    report_capability "Checksum Target" $CHECKSUM_TARGET
-    report_capability "Arptables JF (ARPTABLESJF)" $ARPTABLESJF
+    report_capability "Arptables JF" $ARPTABLESJF
-    report_capability "MASQUERADE Target (MASQUERADE_TGT)" $MASQUERADE_TGT
+    report_capability "MASQUERADE Target" $MASQUERADE_TGT
-    report_capability "UDPLITE Port Redirection (UDPLITEREDIRECT)" $UDPLITEREDIRECT
+    report_capability "UDPLITE Port Redirection" $UDPLITEREDIRECT
-    report_capability "New tos Match (NEW_TOS_MATCH)" $NEW_TOS_MATCH
+    report_capability "New tos Match" $NEW_TOS_MATCH
-    report_capability "TARPIT Target (TARPIT_TARGET)" $TARPIT_TARGET
-    report_capability "Iface Match (IFACE_MATCH)" $IFACE_MATCH
-    report_capability "TCPMSS Target (TCPMSS_TARGET)" $TCPMSS_TARGET
 
     report_capability "Amanda Helper" $AMANDA_HELPER
     report_capability "FTP Helper" $FTP_HELPER
@@ -3148,9 +2927,6 @@ report_capabilities_unsorted1() {
     report_capability1 MASQUERADE_TGT
     report_capability1 UDPLITEREDIRECT
     report_capability1 NEW_TOS_MATCH
-    report_capability1 TARPIT_TARGET
-    report_capability1 IFACE_MATCH
-    report_capability1 TCPMSS_TARGET
 
     report_capability1 AMANDA_HELPER
     report_capability1 FTP_HELPER
@@ -3321,45 +3097,11 @@ reject_command() {
 }
 
 save_command() {
-    local finished
-    finished=0
-
-    shift
-
-    while [ $finished -eq 0 -a $# -gt 0 ]; do
-	option=$1
-	case $option in
-	    -*)
-		option=${option#-}
-
-		while [ -n "$option" ]; do
-		    case $option in
-			-)
-			    finished=1
-			    option=
-			    ;;
-			C*)
-			    g_counters=Yes
-			    option=${option#C}
-			    ;;
-			*)
-			    usage 1
-			    ;;
-		    esac
-		done
-		shift
-		;;
-	    *)
-		finished=1
-		;;
-	esac
-    done
-
     case $# in
-	0)
-	    ;;
 	1)
-	    RESTOREFILE="$1"
+	    ;;
+	2)
+	    RESTOREFILE="$2"
 	    validate_restorefile '<restore file>'
 	    ;;
 	*)
@@ -3592,6 +3334,11 @@ get_config() {
 
     g_hostname=$(hostname 2> /dev/null)
 
+    IP=$(mywhich ip 2> /dev/null)
+    if [ -z "$IP" ] ; then
+	fatal_error "Can't find ip executable"
+    fi
+
     if [ -n "$IPSET" ]; then
 	case "$IPSET" in
 	    */*)
@@ -3611,25 +3358,8 @@ get_config() {
 	IPSET=''
     fi
 
-    if [ -n "$WORKAROUNDS" ]; then
-	case $WORKAROUNDS in
-	    [Yy]es)
-	        ;;
-	    [Nn]o)
-		WORKAROUNDS=''
-		;;
-	    *)
-		fatal_error "Invalid setting ($WORKAROUNDS) for WORKAROUNDS"
-		;;
-	esac
-    fi
-
     TC=tc
 
-    IP=$(mywhich ip 2> /dev/null)
-
-    g_loopback=$(find_loopback_interfaces)
-
 }
 
 #
@@ -3666,16 +3396,12 @@ start_command() {
 	[ -n "$g_nolock" ] || mutex_on
 
 	if [ -x ${VARDIR}/firewall ]; then
-	    if [ -n "$g_fast" -a -x ${VARDIR}/${RESTOREFILE} -a ! ${VARDIR}/firewall -nt ${VARDIR}/${RESTOREFILE} ]; then
-		run_it ${VARDIR}/${RESTOREFILE} $g_debugging restore
-	    else
 	    run_it ${VARDIR}/firewall $g_debugging start
-	    fi
 	    rc=$?
 	else
 	    error_message "${VARDIR}/firewall is missing or is not executable"
 	    logger -p kern.err "ERROR:$g_product start failed"
-	    rc=6
+	    rc=2
 	fi
 
 	[ -n "$g_nolock" ] || mutex_off
@@ -3706,14 +3432,6 @@ start_command() {
 			    finished=1
 			    option=
 			    ;;
-			f*)
-			    g_fast=Yes
-			    option=${option#f}
-			    ;;
-			C*)
-			    g_counters=Yes
-			    option=${option#C}
-			    ;;
 			p*)
 			    [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system"
 			    g_purge=Yes
@@ -3744,7 +3462,7 @@ start_command() {
 }
 
 #
-# Reload/Restart Command Executor
+# Restart Command Executor
 #
 restart_command() {
     local finished
@@ -3775,10 +3493,6 @@ restart_command() {
 			    g_purge=Yes
 			    option=${option%p}
 			    ;;
-			C*)
-			    g_counters=Yes
-			    option=${option#C}
-			    ;;
 			*)
 			    usage 1
 			    ;;
@@ -3803,12 +3517,12 @@ restart_command() {
     [ -n "$g_nolock" ] || mutex_on
 
     if [ -x ${VARDIR}/firewall ]; then
-	run_it ${VARDIR}/firewall $g_debugging $COMMAND
+	run_it ${VARDIR}/firewall $g_debugging restart
 	rc=$?
     else
 	error_message "${VARDIR}/firewall is missing or is not executable"
-	logger -p kern.err "ERROR:$g_product $COMMAND failed"
+	logger -p kern.err "ERROR:$g_product restart failed"
-	rc=6
+	rc=2
     fi
 
     [ -n "$g_nolock" ] || mutex_off
@@ -3823,12 +3537,6 @@ run_command() {
     fi
 }
 
-#
-# Echo the parameters if product is Shorewall or Shorewall6
-#
-ecko() {
-    [ -z "$g_lite" ] && echo "$@"
-}
 #
 # Give Usage Information
 #
@@ -3838,16 +3546,12 @@ usage() # $1 = exit status
     echo "where <command> is one of:"
     echo "   add <interface>[:<host-list>] ... <zone>"
     echo "   allow <address> ..."
-    ecko "   [ check | ck ] [ -e ] [ -r ] [ -p ] [ -r ] [ -T ] [ -i ] [ <directory> ]"
     echo "   clear"
-    ecko "   [ compile | co ] [ -e ] [ -p ] [ -t ] [ -c ] [ -d ] [ -T ] [ -i ] [ <directory name> ] [ <path name> ]"
-    echo "   close <source> <dest> [ <protocol> [ <port> ] ]" 
     echo "   delete <interface>[:<host-list>] ... <zone>"
     echo "   disable <interface>"
     echo "   drop <address> ..."
     echo "   dump [ -x ] [ -l ] [ -m ]"
     echo "   enable <interface>"
-    ecko "   export [ <directory1> ] [<user>@]<system>[:<directory2>]"
     echo "   forget [ <file name> ]"
     echo "   help"
 
@@ -3857,46 +3561,18 @@ usage() # $1 = exit status
 	echo "   iprange <address>-<address>"
     fi
 
-    if [ $g_family -eq 4 ]; then
-	echo "   iptrace <iptables match expression>"
-    else
-	echo "   iptrace <ip6tables match expression>"
-    fi
-
-    ecko "   load [ -s ] [ -c ] [ -r <root user> ] [ -T ] [ -i ] [ <directory> ] <system>"
     echo "   logdrop <address> ..."
     echo "   logreject <address> ..."
     echo "   logwatch [<refresh interval>]"
-
-    if [ $g_family -eq 4 ]; then
-	echo "   noiptrace <iptables match expression>"
-    else
-	echo "   noiptrace <ip6tables match expression>"
-    fi
-
-    echo "   open <source> <dest> [ <protocol> [ <port> ] ]" 
-    echo "   reenable <interface>"
-    ecko "   refresh [ -d ] [ -n ] [ -T ] [ -D <directory> ] [ <chain>... ]"
     echo "   reject <address> ..."
-    ecko "   reload [ -s ] [ -c ] [ -r <root user> ] [ -T ] [ -i ] [ <directory> ] <system>"
     echo "   reset [ <chain> ... ]"
-
+    echo "   restart [ -n ] [ -p ] [ -f ] [ <directory> ]"
-    if [ -n "$g_lite" ]; then
+    echo "   restore [ -n ] [ <file name> ]"
-	echo "   restart [ -n ] [ -p ] [ -f ] [ -C ] [ <directory> ]"
-    else
-	echo "   restart [ -n ] [ -p ] [-d] [ -f ] [ -c ] [ -T ] [ -i ] [ -C ] [ <directory> ]"
-    fi
-
-    echo "   restore [ -n ] [ -p ] [ -C ] [ <file name> ]"
     echo "   run <command> [ <parameter> ... ]"
-    ecko "   safe-restart [ -t <timeout> ] [ <directory> ]"
+    echo "   save [ <file name> ]"
-    ecko "   safe-start [ -t <timeout> ] [ <directory> ]"
-    echo "   save [ -C ] [ <file name> ]"
-    echo "   savesets"
     echo "   [ show | list | ls ] [ -b ] [ -x ] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]"
-    ecko "   [ show | list | ls ] actions"
-    echo "   [ show | list | ls ] arptables"
     echo "   [ show | list | ls ] [ -f ] capabilities"
+    echo "   [ show | list | ls ] arptables"
     echo "   [ show | list | ls ] [ -x ] {bl|blacklists}"
     echo "   [ show | list | ls ] classifiers"
     echo "   [ show | list | ls ] config"
@@ -3912,26 +3588,15 @@ usage() # $1 = exit status
 
     echo "   [ show | list | ls ] [ -m ] log [<regex>]"
     echo "   [ show | list | ls ] [ -x ] mangle|nat|raw|rawpost"
-    ecko "   [ show | list | ls ] macro <macro>"
-    ecko "   [ show | list | ls ] macros"
     echo "   [ show | list | ls ] nfacct"
-    echo "   [ show | list | ls ] opens"
     echo "   [ show | list | ls ] policies"
     echo "   [ show | list | ls ] routing"
     echo "   [ show | list | ls ] tc [ device ]"
     echo "   [ show | list | ls ] vardir"
     echo "   [ show | list | ls ] zones"
-
+    echo "   start [ -f ] [ -p ] [ <directory> ]"
-    if [ -n "$g_lite" ]; then
-	echo "   start [ -f ] [ -p ] [ -C ] [ <directory> ]"
-    else
-	echo "   start [ -f ] [ -n ] [ -p ] [ -c ] [ -T ] [ -i ] [ -C ] [ <directory> ]"
-    fi
-
-    echo "   status [ -i ]"
     echo "   stop"
-    ecko "   try <directory> [ <timeout> ]"
+    echo "   status [ -i ]"
-    ecko "   update [ -a ] [ -b ] [ -r ] [ -T ]  [ -D ] [ -i ] [-t] [-s] [-n] [-A] [ <directory> ]"
     echo "   version [ -a ]"
     echo
     exit $1
@@ -3969,6 +3634,7 @@ shorewall_cli() {
     g_refreshchains=:none:
     g_confess=
     g_update=
+    g_convert=
     g_annotate=
     g_recovering=
     g_timestamp=
@@ -3977,10 +3643,9 @@ shorewall_cli() {
     g_conditional=
     g_file=
     g_doing="Compiling"
+    g_directives=
     g_inline=
-    g_counters=
+    g_tcrules=
-    g_loopback=
-    g_compiled=
 
     VERBOSE=
     VERBOSITY=1
@@ -4102,6 +3767,10 @@ shorewall_cli() {
 
     [ -n "${VARDIR:=/var/lib/$g_program}" ]
 
+    if [ ! -f ${VARDIR}/firewall ]; then
+	[ -f ${VARDIR}/.restore ] && cp -f ${VARDIR}/.rstore ${VARDIR}/firewall
+    fi
+
     g_firewall=${VARDIR}/firewall
 
     version_file=${g_sharedir}/version
@@ -4159,12 +3828,12 @@ shorewall_cli() {
 	    run_it $g_firewall $g_debugging reset $@
 	    [ -n "$g_nolock" ] || mutex_off
 	    ;;
-	reload|restart)
+	restart)
 	    get_config Yes Yes
 	    shift
 	    restart_command $@
 	    ;;
-	disable|enable|reenable)
+	disable|enable)
 	    get_config Yes
 	    if product_is_started; then
 		run_it ${VARDIR}/firewall $g_debugging $@
@@ -4227,11 +3896,6 @@ shorewall_cli() {
 	    [ $# -eq 1 ] && usage 1
 	    reject_command $@
 	    ;;
-	open|close)
-	    get_config
-	    shift
-	    open_close_command $@
-	    ;;
 	allow)
 	    get_config
 	    allow_command $@
@@ -4276,29 +3940,10 @@ shorewall_cli() {
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    #
-	    # Way to call functions in the libraries directly
+	    # Undocumented way to call functions in the libraries directly
 	    #
 	    shift
-
-	    if [ $# -gt 0 ]; then
-		#
-		# First look for it here
-		#
-		if type $1 2> /dev/null | fgrep -q 'is a function'; then
-		    #
-		    # It's a shell function -- call it
-		    #
 	    $@
-		else
-		    #
-		    # It isn't a function visible to this script -- try
-		    # the compiled firewall
-		    #
-		    run_it $g_firewall $g_debugging call $@
-		fi
-	    else
-		usage 1
-	    fi
 	    ;;
 	help)
 	    shift
@@ -4314,12 +3959,6 @@ shorewall_cli() {
 	    shift
 	    noiptrace_command $@
 	    ;;
-	savesets)
-	    [ $# -eq 1 ] || usage 1
-	    get_config
-	    [ -n "$g_debugging" ] && set -x
-	    savesets1
-	    ;;
 	*)
 	    if [ -z "$g_lite" ]; then
 		compiler_command $@

Shorewall-core/lib.common

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
+# Shorewall 4.5 -- /usr/share/shorewall/lib.common.
 #
-#     (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -71,18 +71,81 @@ startup_error() # $* = Error Message
 }
 
 #
-# Create the required option string and run the passed script using
+# Get the Shorewall version of the passed script
+#
+get_script_version() { # $1 = script
+    local temp
+    local version
+    local ifs
+    local digits
+    local verbosity
+
+    verbosity="$VERBOSITY"
+    VERBOSITY=0
+
+    temp=$( $SHOREWALL_SHELL $1 version | tail -n 1 | sed 's/-.*//' )
+
+    if [ -z "$temp" ]; then
+	version=0
+    else
+	ifs=$IFS
+	IFS=.
+	temp=$(echo $temp)
+	IFS=$ifs
+	digits=0
+
+	for temp in $temp; do
+	    version=${version}$(printf '%02d' $temp)
+	    digits=$(($digits + 1))
+	    [ $digits -eq 3 ] && break
+	done
+    fi
+
+    echo $version
+
+    VERBOSITY="$verbosity"
+}
+
+#
+# Do required exports or create the required option string and run the passed script using
 # $SHOREWALL_SHELL
 #
 run_it() {
     local script
     local options
+    local version
 
     export VARDIR
 
     script=$1
     shift
 
+    version=$(get_script_version $script)
+
+    if [ $version -lt 040408 ]; then
+	#
+	# Old script that doesn't understand 4.4.8 script options
+	#
+	export RESTOREFILE
+	export VERBOSITY
+	export NOROUTES=$g_noroutes
+	export PURGE=$g_purge
+	export TIMESTAMP=$g_timestamp
+	export RECOVERING=$g_recovering
+
+	case "$g_program" in
+	    *-lite)
+		#
+		# Shorewall Lite
+		#
+		export LOGFORMAT
+		export IPTABLES
+		;;
+	esac
+    else
+	#
+	# 4.4.8 or later -- no additional exports required
+	#
 	if [ x$1 = xtrace -o x$1 = xdebug ]; then
 	    options="$1 -"
 	    shift;
@@ -94,11 +157,11 @@ run_it() {
 	[ -n "$g_timestamp" ]  && options=${options}t
 	[ -n "$g_purge" ]      && options=${options}p
 	[ -n "$g_recovering" ] && options=${options}r
-    [ -n "$g_counters" ]   && options=${options}c
 
 	options="${options}V $VERBOSITY"
 
 	[ -n "$RESTOREFILE" ] && options="${options} -R $RESTOREFILE"
+    fi
 
     $SHOREWALL_SHELL $script $options $@
 }
@@ -147,17 +210,6 @@ split() {
     IFS=$ifs
 }
 
-#
-# Split a comma-separated list into a space-separated list
-#
-split_list() {
-    local ifs
-    ifs=$IFS
-    IFS=,
-    echo $*
-    IFS=$ifs
-}
-
 #
 # Search a list looking for a match -- returns zero if a match found
 # 1 otherwise
@@ -321,7 +373,7 @@ reload_kernel_modules() {
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
+    [ -n "${MODULE_SUFFIX:=ko ko.gz o o.gz gz}" ]
 
     [ -z "$MODULESDIR" ] && \
 	uname=$(uname -r) && \
@@ -360,7 +412,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
+    [ -n "${MODULE_SUFFIX:=o gz ko o.gz ko.gz}" ]
 
     [ -z "$MODULESDIR" ] && \
 	uname=$(uname -r) && \
@@ -499,9 +551,9 @@ in_network() # $1 = IP address, $2 = CIDR network
 #
 # Query NetFilter about the existence of a filter chain
 #
-chain_exists() # $1 = chain name, $2 = table name (optional)
+chain_exists() # $1 = chain name
 {
-    qt1 $g_tool -t ${2:-filter} -L $1 -n
+    qt1 $g_tool -L $1 -n
 }
 
 #
@@ -592,24 +644,6 @@ find_first_interface_address_if_any() # $1 = interface
     fi
 }
 
-#
-#Determines if the passed interface is a loopback interface
-#
-loopback_interface() { #$1 = Interface name
-    [ "$1" = lo ] || $IP link show $1 | fgrep -q LOOPBACK
-}
-
-#
-# Find Loopback Interfaces
-#
-find_loopback_interfaces() {
-    local interfaces
-
-    [ -x "$IP" ] && interfaces=$($IP link show | fgrep LOOPBACK | sed 's/://g' | cut -d ' ' -f 2)
-
-    [ -n "$interfaces" ] && echo $interfaces || echo lo
-}
-
 #
 # Internal version of 'which'
 #

Shorewall-core/shorewallrc.apple

@@ -1,5 +1,5 @@
 #
-# Apple OS X Shorewall 5.0 rc file
+# Apple OS X Shorewall 4.5 rc file
 #
 BUILD=apple
 HOST=apple
@@ -14,7 +14,7 @@ INITDIR=                               #Unused on OS X
 INITFILE=                              #Unused on OS X
 INITSOURCE=                            #Unused on OS X
 ANNOTATED=                             #Unused on OS X
-SERVICEDIR=                            #Unused on OS X
+SYSTEMD=                               #Unused on OS X
 SERVICEFILE=                           #Unused on OS X
 SYSCONFDIR=                            #Unused on OS X
 SPARSE=Yes                             #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.

Shorewall-core/shorewallrc.archlinux

@@ -1,5 +1,5 @@
 #
-# Arch Linux Shorewall 5.0 rc file
+# Arch Linux Shorewall 4.5 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=archlinux
@@ -8,14 +8,14 @@ SHAREDIR=${PREFIX}/share               #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/share             #Directory for executable scripts.
 PERLLIBDIR=${PREFIX}/share/shorewall   #Directory to install Shorewall Perl module directory
 CONFDIR=/etc                           #Directory where subsystem configurations are installed
-SBINDIR=/usr/bin                       #Directory where system administration programs are installed
+SBINDIR=/usr/sbin                      #Directory where system administration programs are installed
 MANDIR=${SHAREDIR}/man                 #Directory where manpages are installed.
 INITDIR=                               #Directory where SysV init scripts are installed.
 INITFILE=                              #Name of the product's installed SysV init script
 INITSOURCE=                            #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                             #If non-zero, annotated configuration files are installed
 SYSCONFDIR=                            #Directory where SysV init parameter files are installed
-SERVICEDIR=/usr/lib/systemd/system     #Directory where .service files are installed (systems running systemd only)
+SYSTEMD=/usr/lib/systemd/system        #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                           #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SPARSE=                                #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                        #Directory where product variable data is stored.

Shorewall-core/shorewallrc.cygwin

@@ -1,5 +1,5 @@
 #
-# Cygwin Shorewall 5.0 rc file
+# Cygwin Shorewall 4.5 rc file
 #
 BUILD=cygwin
 HOST=cygwin
@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                   #Unused on Cygwin
 INITFILE=                             #Unused on Cygwin
 INITSOURCE=                           #Unused on Cygwin
 ANNOTATED=                            #Unused on Cygwin
-SERVICEDIR=                           #Unused on Cygwin
+SYSTEMD=                              #Unused on Cygwin
 SERVICEFILE=                          #Unused on Cygwin
 SYSCONFDIR=                           #Unused on Cygwin
 SPARSE=Yes                            #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.

Shorewall-core/shorewallrc.debian

@@ -17,7 +17,7 @@ ANNOTATED=                              #If non-zero, annotated configuration fi
 SYSCONFFILE=default.debian              #Name of the distributed file to be installed in $SYSCONFDIR
 SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default                 #Directory where SysV init parameter files are installed
-SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
+SYSTEMD=                                #Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes                              #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.

Shorewall-core/shorewallrc.debian.systemd

@@ -1,23 +0,0 @@
-#
-# Debian Shorewall 4.5 rc file
-#
-BUILD=					#Default is to detect the build system
-HOST=debian
-PREFIX=/usr				#Top-level directory for shared files, libraries, etc.
-SHAREDIR=${PREFIX}/share		#Directory for arch-neutral files.
-LIBEXECDIR=${PREFIX}/share		#Directory for executable scripts.
-PERLLIBDIR=${PREFIX}/share/shorewall	#Directory to install Shorewall Perl module directory
-CONFDIR=/etc				#Directory where subsystem configurations are installed
-SBINDIR=/sbin				#Directory where system administration programs are installed
-MANDIR=${PREFIX}/share/man		#Directory where manpages are installed.
-INITDIR=				#Directory where SysV init scripts are installed.
-INITFILE=				#Name of the product's installed SysV init script
-INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
-ANNOTATED=				#If non-zero, annotated configuration files are installed
-SYSCONFFILE=default.debian		#Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
-SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
-SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
-SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
-VARLIB=/var/lib				#Directory where product variable data is stored.
-VARDIR=${VARLIB}/$PRODUCT		#Directory where product variable data is stored.

Shorewall-core/shorewallrc.default

@@ -1,5 +1,5 @@
 #
-# Default Shorewall 5.0 rc file
+# Default Shorewall 4.5 rc file
 #
 HOST=linux                              #Generic Linux
 BUILD=                                  #Default is to detect the build system
@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                     #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.sh                      #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SERVICEDIR=                             #Directory where .service files are installed (systems running systemd only)
+SYSTEMD=                                #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                            #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=                            #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=                             #Directory where SysV init parameter files are installed

Shorewall-core/shorewallrc.redhat

@@ -1,5 +1,5 @@
 #
-# RedHat/FedoraShorewall 5.0 rc file
+# RedHat/FedoraShorewall 4.5 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=redhat
@@ -14,7 +14,7 @@ INITDIR=/etc/rc.d/init.d                #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.fedora.sh               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
+SYSTEMD=/lib/systemd/system             #Directory where .service files are installed (systems running systemd only)
 SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed as $SYSCONFDIR/$PRODUCT
 SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter files are installed

Shorewall-core/shorewallrc.slackware

@@ -1,5 +1,5 @@
 #
-# Slackware Shorewall 5.0 rc file
+# Slackware Shorewall 4.5 rc file
 #
 BUILD=slackware
 HOST=slackware
@@ -15,7 +15,7 @@ AUXINITSOURCE=init.slackware.firewall.sh   #Name of the distributed file to be i
 AUXINITFILE=rc.firewall                    #Name of the product's installed SysV init script
 INITSOURCE=init.slackware.$PRODUCT.sh      #Name of the distributed file to be installed as a second SysV init script
 INITFILE=rc.$PRODUCT                       #Name of the product's installed second init script
-SERVICEDIR=                                #Name of the directory where .service files are installed (systems running systemd only)
+SYSTEMD=                                   #Name of the directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                               #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=                               #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=                                #Name of the directory where SysV init parameter files are installed.

Shorewall-core/shorewallrc.suse

@@ -1,5 +1,5 @@
 #
-# SuSE Shorewall 5.0 rc file
+# SuSE Shorewall 4.5 rc file
 #
 BUILD=                                                #Default is to detect the build system
 HOST=suse
@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                                   #Directory where SysV init
 INITFILE=$PRODUCT                                     #Name of the product's SysV init script
 INITSOURCE=init.suse.sh                               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                                            #If non-zero, annotated configuration files are installed
-SERVICEDIR=                                           #Directory where .service files are installed (systems running systemd only)
+SYSTEMD=                                              #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                      		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=sysconfig                                 #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=/etc/sysconfig/                            #Directory where SysV init parameter files are installed

Shorewall-core/uninstall.sh

@@ -35,12 +35,6 @@ usage() # $1 = exit status
     exit $1
 }
 
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
 qt()
 {
     "$@" >/dev/null 2>&1

Shorewall-init/ifupdown.debian.sh

@@ -28,7 +28,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
 	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then

Shorewall-init/ifupdown.fedora.sh

@@ -31,7 +31,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
 
     if [ ! -x "$STATEDIR/firewall" ]; then
 	if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then

Shorewall-init/ifupdown.suse.sh

@@ -28,7 +28,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
 	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then

Shorewall-init/init.debian.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -71,12 +71,10 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
 
     if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || echo_notdone
-    else
-	return 0
     fi
 }
 
@@ -105,17 +103,21 @@ shorewall_start () {
   echo -n "Initializing \"Shorewall-based firewalls\": "
 
   for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
+      setstatedir
+
       if [ -x ${STATEDIR}/firewall ]; then
           #
 	  # Run in a sub-shell to avoid name collisions
 	  #
 	  ( 
 	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		      ${STATEDIR}/firewall ${OPTIONS} stop
+		  ${STATEDIR}/firewall ${OPTIONS} stop || echo_notdone
+	      else
+		  echo_notdone
 	      fi
 	  )
-	  fi
+      else
+	  echo_notdone
       fi
   done
 
@@ -142,10 +144,10 @@ shorewall_stop () {
 
   echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
+      setstatedir
+
       if [ -x ${STATEDIR}/firewall ]; then
-	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  ${STATEDIR}/firewall ${OPTIONS} clear || echo_notdone
-	  fi
       fi
   done
 

Shorewall-init/init.fedora.sh

@@ -42,7 +42,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
 
     if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
 	${SBINDIR}/$PRODUCT $OPTIONS compile -c

Shorewall-init/init.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -67,12 +67,12 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
 
+    if [ ! -x $STATEDIR/firewall ]; then
 	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
 	    ${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
-    else
+	fi
-	return 0
     fi
 }
 
@@ -83,11 +83,11 @@ shorewall_start () {
 
   echo -n "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
+      setstatedir
+
       if [ -x ${STATEDIR}/firewall ]; then
 	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      ${STATEDIR}/firewall ${OPTIONS} stop || exit 1
-	      fi
 	  fi
       fi
   done
@@ -106,10 +106,10 @@ shorewall_stop () {
 
   echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
+      setstatedir
+
       if [ -x ${STATEDIR}/firewall ]; then
-	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  ${STATEDIR}/firewall ${OPTIONS} clear || exit 1
-	  fi
       fi
   done
 

Shorewall-init/init.suse.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -38,7 +38,7 @@
 # 0 - success
 # 1 - generic or unspecified error
 # 2 - invalid or excess argument(s)
-# 3 - unimplemented feature
+# 3 - unimplemented feature (e.g. "reload")
 # 4 - insufficient privilege
 # 5 - program is not installed
 # 6 - program is not configured
@@ -77,12 +77,10 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
 
     if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || exit
-    else
-	return 0
     fi
 }
 
@@ -93,12 +91,14 @@ shorewall_start () {
 
   echo -n "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
+      setstatedir
+
       if [ -x $STATEDIR/firewall ]; then
 	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-		  $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
+	      $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop || exit
-	      fi
 	  fi
+      else
+	  exit 6
       fi
   done
 
@@ -114,10 +114,12 @@ shorewall_stop () {
 
   echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
+      setstatedir
+
       if [ -x ${STATEDIR}/firewall ]; then
-	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  ${STATEDIR}/firewall ${OPTIONS} clear || exit
-	  fi
+      else
+	  exit 6
       fi
   done
 

Shorewall-init/install.sh

@@ -188,8 +188,6 @@ done
 
 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 
-[ $configure -eq 1 ] && ETC=/etc || ETC="${CONFDIR}"
-
 if [ -z "$BUILD" ]; then
     case $(uname) in
 	cygwin*)
@@ -332,16 +330,12 @@ fi
 #
 # Install the .service file
 #
-if [ -z "${SERVICEDIR}" ]; then
+if [ -n "$SYSTEMD" ]; then
-    SERVICEDIR="$SYSTEMD"
+    mkdir -p ${DESTDIR}${SYSTEMD}
-fi
-
-if [ -n "$SERVICEDIR" ]; then
-    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
     if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${SBINDIR}
         chmod 755 ${DESTDIR}${SBINDIR}
@@ -374,6 +368,8 @@ chmod 644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
 #
 # Remove and create the symbolic link to the init script
 #
+echo CONFDIR is $CONFDIR
+
 if [ -z "$DESTDIR" ]; then
     rm -f ${SHAREDIR}/shorewall-init/init
     ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/shorewall-init/init
@@ -381,9 +377,9 @@ fi
 
 if [ $HOST = debian ]; then
     if [ -n "${DESTDIR}" ]; then
-	mkdir -p ${DESTDIR}${ETC}/network/if-up.d/
+	mkdir -p ${DESTDIR}/etc/network/if-up.d/
-	mkdir -p ${DESTDIR}${ETC}/network/if-down.d/
+	mkdir -p ${DESTDIR}/etc/network/if-down.d/
-	mkdir -p ${DESTDIR}${ETC}/network/if-post-down.d/
+	mkdir -p ${DESTDIR}/etc/network/if-post-down.d/
     elif [ $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
 	mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
@@ -392,11 +388,15 @@ if [ $HOST = debian ]; then
 
     if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
-	    mkdir ${DESTDIR}${ETC}/default
+	    mkdir ${DESTDIR}/etc/default
 	fi
 
-	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
+	if [ $configure -eq 1 ]; then
-	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
+	    install_file sysconfig ${DESTDIR}/etc/default/shorewall-init 0644
+	else
+	    mkdir -p ${DESTDIR}${CONFDIR}/default
+	    install_file sysconfig ${DESTDIR}${CONFDIR}/default/shorewall-init 0644
+	fi
     fi
 
     IFUPDOWN=ifupdown.debian.sh
@@ -406,13 +406,13 @@ else
 
 	if [ -z "$RPM" ]; then
 	    if [ $HOST = suse ]; then
-		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-up.d
+		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-up.d
-		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-down.d
+		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-down.d
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
 	    else
-		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
+		mkdir -p ${DESTDIR}/etc/NetworkManager/dispatcher.d
 	    fi
 	fi
     fi
@@ -438,8 +438,12 @@ mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
-    [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
+    if [ $configure -eq 1 ]; then
-    install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
+	install_file ifupdown ${DESTDIR}/etc/NetworkManager/dispatcher.d/01-shorewall 0544
+    else
+	mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
+	install_file ifupdown ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall 0544
+    fi
 fi
 
 case $HOST in
@@ -511,7 +515,7 @@ if [ -z "$DESTDIR" ]; then
 	    # not by the installer
 	    /bin/true
 	else
-	    if [ -n "$SERVICEDIR" ]; then
+	    if [ -n "$SYSTEMD" ]; then
 		if systemctl enable shorewall-init.service; then
 		    echo "Shorewall Init will start automatically at boot"
 		fi

Shorewall-init/shorewall-init

@@ -1,19 +1,18 @@
-#!/bin/bash
+#! /bin/bash
-#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     (c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
-#	On most distributions, this file should be called
+#       On most distributions, this file should be called /etc/init.d/shorewall.
-#	/etc/init.d/shorewall.
 #
 #       Complete documentation is available at http://shorewall.net
 #
 #       This program is part of Shorewall.
 #
 #	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by
+#	it under the terms of the GNU General Public License as published by the
-#	the Free Software Foundation, either version 2 of the license or,
+#       Free Software Foundation, either version 2 of the license or, at your
-#	at your option, any later version.
+#       option, any later version.
 #
 #	This program is distributed in the hope that it will be useful,
 #	but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -23,7 +22,7 @@
 #	You should have received a copy of the GNU General Public License
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
-###############################################################################
+#########################################################################################
 # set the STATEDIR variable
 setstatedir() {
     local statedir
@@ -31,12 +30,10 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
     fi
 
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}
 
     if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || exit 1
-    else
-	return 0
     fi
 }
 
@@ -64,17 +61,22 @@ shorewall_start () {
 
   echo -n "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-	if setstatedir; then
+      setstatedir
+
       if [ -x ${STATEDIR}/firewall ]; then
           #
 	  # Run in a sub-shell to avoid name collisions
 	  #
 	  (
 	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-			${STATEDIR}/firewall ${OPTIONS} stop
+		  ${STATEDIR}/firewall ${OPTIONS} stop || exit 1
+	      else
+		  exit 1
 	      fi
 	  )
-	    fi
+      else
+          echo ERROR:  ${STATEDIR}/firewall does not exist or is not executable!
+	  exit 1
       fi
   done
 
@@ -92,10 +94,10 @@ shorewall_stop () {
 
   echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
-	if setstatedir; then
+      setstatedir
+
       if [ -x ${STATEDIR}/firewall ]; then
-		${STATEDIR}/firewall ${OPTIONS} clear
+	  ${STATEDIR}/firewall ${OPTIONS} clear || exit 1
-	    fi
       fi
   done
 

Shorewall-init/shorewall-init.service

@@ -4,16 +4,17 @@
 #     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
-Description=Shorewall firewall (bootup security)
+Description=Shorewall IPv4 firewall (bootup security)
 Before=network.target
+Conflicts=iptables.service firewalld.service
 
 [Service]
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-init
 StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
+ExecStart=/sbin/shorewall-init $OPTIONS start
-ExecStop=/sbin/shorewall-init stop
+ExecStop=/sbin/shorewall-init $OPTIONS stop
 
 [Install]
 WantedBy=basic.target

Shorewall-init/shorewall-init.service.214

@@ -1,20 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network-pre.target
-Wants=network-pre.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target

Shorewall-init/shorewall-init.service.214.debian

@@ -1,20 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network-pre.target
-Wants=network-pre.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/default/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target

Shorewall-init/shorewall-init.service.debian

@@ -1,19 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/default/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target

Shorewall-init/uninstall.sh

@@ -35,12 +35,6 @@ usage() # $1 = exit status
     exit $1
 }
 
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
 qt()
 {
     "$@" >/dev/null 2>&1

Shorewall-lite/configpath

@@ -1,5 +1,5 @@
 #
-# Shorewall Lite version 5 - Default Config Path
+# Shorewall Lite version 4.1 - Default Config Path
 #
 # /usr/share/shorewall-lite/configpath
 #

Shorewall-lite/init.fedora.sh

@@ -39,7 +39,7 @@ fi
 
 start() {
     echo -n $"Starting Shorewall: "
-    $shorewall $OPTIONS start $STARTOPTIONS 2>&1 | $logger
+    $shorewall $OPTIONS start 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile
@@ -69,7 +69,7 @@ restart() {
 # Note that we don't simply stop and start since shorewall has a built in
 # restart which stops the firewall if running and then starts it.
     echo -n $"Restarting Shorewall: "
-    $shorewall $OPTIONS restart $RESTARTOPTIONS 2>&1 | $logger
+    $shorewall $OPTIONS restart 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
 	touch $lockfile

Shorewall-lite/install.sh

@@ -381,7 +381,7 @@ fi
 
 if [ -n "$INITFILE" ]; then
     if [ -f "${INITSOURCE}" ]; then
-	initfile="${DESTDIR}${INITDIR}/${INITFILE}"
+	initfile="${DESTDIR}/${INITDIR}/${INITFILE}"
 	install_file ${INITSOURCE} "$initfile" 0544
 
 	[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' "$initfile"
@@ -392,16 +392,12 @@ fi
 #
 # Install the .service file
 #
-if [ -z "${SERVICEDIR}" ]; then
+if [ -n "$SYSTEMD" ]; then
-    SERVICEDIR="$SYSTEMD"
+    mkdir -p ${DESTDIR}${SYSTEMD}
-fi
-
-if [ -n "$SERVICEDIR" ]; then
-    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
-    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
 fi
 #
 # Install the config file
@@ -543,7 +539,7 @@ if [ ${SHAREDIR} != /usr/share ]; then
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
-    if [ -n "$SERVICEDIR" ]; then
+    if [ -n "$SYSTEMD" ]; then
 	if systemctl enable ${PRODUCT}.service; then
 	    echo "$Product will start automatically at boot"
 	fi

Shorewall-lite/manpages/shorewall-lite.xml

@@ -47,19 +47,6 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>allow</option></arg>
-
-      <arg choice="plain"><replaceable>address</replaceable></arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -72,21 +59,6 @@
       choice="plain"><option>clear</option><arg><option>-f</option></arg></arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>close</option><arg choice="req">
-      <replaceable>open-number</replaceable> |
-      <replaceable>source</replaceable><replaceable>dest</replaceable><arg><replaceable>protocol</replaceable><arg>
-      <replaceable>port</replaceable> </arg></arg></arg><replaceable>
-      </replaceable></arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -144,8 +116,6 @@
       <arg><option>-l</option></arg>
 
       <arg><option>-m</option></arg>
-
-      <arg><option>-c</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -293,29 +263,6 @@
       expression</replaceable></arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg choice="plain"><option>open</option><replaceable>
-      source</replaceable><replaceable> dest</replaceable><arg>
-      <replaceable>protocol</replaceable><arg> <replaceable>port</replaceable>
-      </arg> </arg></arg>
-    </cmdsynopsis>
-
-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>reenable</option></arg>
-
-      <arg choice="plain">{ <replaceable>interface</replaceable> |
-      <replaceable>provider</replaceable> }</arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -329,21 +276,6 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>reload</option></arg>
-
-      <arg><option>-n</option></arg>
-
-      <arg><option>-p</option><arg><option>-C</option></arg></arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -367,7 +299,9 @@
 
       <arg><option>-n</option></arg>
 
-      <arg><option>-p</option><arg><option>-C</option></arg></arg>
+      <arg><option>-p</option></arg>
+
+      <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -380,8 +314,6 @@
 
       <arg choice="plain"><option>restore</option></arg>
 
-      <arg><option>-C</option></arg>
-
       <arg><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
@@ -408,23 +340,11 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg
+      <arg choice="plain"><option>save</option></arg>
-      choice="plain"><option>save</option><arg><option>-C</option></arg></arg>
 
       <arg choice="opt"><replaceable>filename</replaceable></arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>savesets</option></arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -432,7 +352,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>
 
       <arg><option>-b</option></arg>
 
@@ -454,7 +374,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>
 
       <arg><option>-x</option></arg>
 
@@ -468,7 +388,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>
 
       <arg><option>-f</option></arg>
 
@@ -482,7 +402,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>
 
       <arg
       choice="req"><option>classifiers|connections|config|events|filters|ip|ipa|zones|policies|marks</option></arg>
@@ -495,7 +415,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>
 
       <arg choice="plain"><option>event</option><arg
       choice="plain"><replaceable>event</replaceable></arg></arg>
@@ -508,25 +428,11 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>
-
-      <arg><option>-c</option></arg>
-
-      <arg choice="plain"><option>routing</option></arg>
-    </cmdsynopsis>
-
-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="req"><option>show | list | ls </option></arg>
 
       <arg><option>-x</option></arg>
 
-      <arg choice="req"><option>mangle|nat|raw|rawpost</option></arg>
+      <arg choice="req"><option>mangle|nat|routing|raw|rawpost</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -536,7 +442,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>
 
       <arg choice="plain"><option>tc</option></arg>
     </cmdsynopsis>
@@ -548,7 +454,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>
 
       <arg><option>-m</option></arg>
 
@@ -568,10 +474,6 @@
       <arg><option>-n</option></arg>
 
       <arg><option>-p</option></arg>
-
-      <arg><option>-f</option></arg>
-
-      <arg><option>-C</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -624,9 +526,8 @@
 
     <para>The nolock <option>option</option> prevents the command from
     attempting to acquire the Shorewall-lite lockfile. It is useful if you
-    need to include <command>shorewall</command> commands in the
+    need to include <command>shorewall</command> commands in
-    <filename>started</filename> <ulink
+    <filename>/etc/shorewall/started</filename>.</para>
-    url="../shorewall_extension_scripts.html">extension script</ulink>.</para>
 
     <para>The <emphasis>options</emphasis> control the amount of output that
     the command produces. They consist of a sequence of the letters <emphasis
@@ -637,8 +538,8 @@
     role="bold">v</emphasis> adds one to the effective verbosity and each
     <emphasis role="bold">q</emphasis> subtracts one from the effective
     VERBOSITY. Alternately, <emphasis role="bold">v</emphasis> may be followed
-    immediately with one of -1,0,1,2 to specify VERBOSITY. There may be no
+    immediately with one of -1,0,1,2 to specify a specify VERBOSITY. There may
-    white-space between <emphasis role="bold">v</emphasis> and the
+    be no white-space between <emphasis role="bold">v</emphasis> and the
     VERBOSITY.</para>
 
     <para>The <emphasis>options</emphasis> may also include the letter
@@ -653,10 +554,7 @@
 
     <variablelist>
       <varlistentry>
-        <term><emphasis role="bold">add </emphasis>{
+        <term><emphasis role="bold">add</emphasis></term>
-        <replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
-        <replaceable>zone</replaceable> | <replaceable>zone</replaceable>
-        <replaceable>host-list</replaceable> }</term>
 
         <listitem>
           <para>Adds a list of hosts or subnets to a dynamic zone usually used
@@ -681,8 +579,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">allow
+        <term><emphasis role="bold">allow</emphasis></term>
-        </emphasis><replaceable>address</replaceable></term>
 
         <listitem>
           <para>Re-enables receipt of packets from hosts previously
@@ -694,25 +591,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">call <replaceable>function</replaceable> [
+        <term><emphasis role="bold">clear</emphasis></term>
-        <replaceable>parameter</replaceable> ... ]</emphasis></term>
-
-        <listitem>
-          <para>Added in Shorewall 4.6.10. Allows you to call a function in
-          one of the Shorewall libraries or in your compiled script. function
-          must name the shell function to be called. The listed parameters are
-          passed to the function.</para>
-
-          <para>The function is first searched for in
-          <filename>lib.base</filename>, <filename>lib.common</filename> and
-          <filename>lib.cli</filename>. If it is not found, the call command
-          is passed to the generated script to be executed.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">clear
-        </emphasis>[-<option>f</option>]</term>
 
         <listitem>
           <para>Clear will remove all rules and chains installed by
@@ -723,38 +602,13 @@
           <para>If <option>-f</option> is given, the command will be processed
           by the compiled script that executed the last successful <emphasis
           role="bold">start</emphasis>, <emphasis
-          role="bold">reload</emphasis>, <emphasis
           role="bold">restart</emphasis> or <emphasis
           role="bold">refresh</emphasis> command if that script exists.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">close</emphasis> {
+        <term><emphasis role="bold">delete</emphasis></term>
-        <replaceable>open-number</replaceable> |
-        <replaceable>source</replaceable> <replaceable>dest</replaceable> [
-        <replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
-        ] ] }</term>
-
-        <listitem>
-          <para>Added in Shorewall 4.5.8. This command closes a temporary open
-          created by the <command>open</command> command. In the first form,
-          an <replaceable>open-number</replaceable> specifies the open to be
-          closed. Open numbers are displayed in the <emphasis
-          role="bold">num</emphasis> column of the output of the
-          <command>shorewall-lite show opens </command>command.</para>
-
-          <para>When the second form of the command is used, the parameters
-          must match those given in the earlier <command>open</command>
-          command.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">delete </emphasis>{
-        <replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
-        <replaceable>zone</replaceable> | <replaceable>zone</replaceable>
-        <replaceable>host-list</replaceable> }</term>
 
         <listitem>
           <para>The delete command reverses the effect of an earlier <emphasis
@@ -769,9 +623,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">disable </emphasis>{
+        <term><emphasis role="bold">disable</emphasis></term>
-        <replaceable>interface</replaceable> |
-        <replaceable>provider</replaceable> }</term>
 
         <listitem>
           <para>Added in Shorewall 4.4.26. Disables the optional provider
@@ -783,8 +635,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">drop
+        <term><emphasis role="bold">drop</emphasis></term>
-        </emphasis><replaceable>address</replaceable></term>
 
         <listitem>
           <para>Causes traffic from the listed <emphasis>address</emphasis>es
@@ -793,9 +644,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">dump </emphasis>[-<option>x</option>]
+        <term><emphasis role="bold">dump</emphasis></term>
-        [-<option>l</option>] [-<option>m</option>]
-        [-<option>c</option>]</term>
 
         <listitem>
           <para>Produces a verbose report about the firewall configuration for
@@ -809,16 +658,11 @@
 
           <para>The <emphasis role="bold">-l</emphasis> option causes the rule
           number for each Netfilter rule to be displayed.</para>
-
-          <para>The <option>-c</option> option causes the route cache to be
-          dumped in addition to the other routing information.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">enable </emphasis>{
+        <term><emphasis role="bold">enable</emphasis></term>
-        <replaceable>interface</replaceable> |
-        <replaceable>provider</replaceable> }</term>
 
         <listitem>
           <para>Added in Shorewall 4.4.26. Enables the optional provider
@@ -830,8 +674,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">forget </emphasis>[
+        <term><emphasis role="bold">forget</emphasis></term>
-        <replaceable>filename</replaceable> ]</term>
 
         <listitem>
           <para>Deletes /var/lib/shorewall-lite/<emphasis>filename</emphasis>
@@ -852,8 +695,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">hits </emphasis>
+        <term><emphasis role="bold">hits</emphasis></term>
-        [-<option>t</option>]</term>
 
         <listitem>
           <para>Generates several reports from Shorewall-lite log messages in
@@ -863,8 +705,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">ipcalc </emphasis>{ address mask |
+        <term><emphasis role="bold">ipcalc</emphasis></term>
-        address/vlsm }</term>
 
         <listitem>
           <para>Ipcalc displays the network address, broadcast address,
@@ -874,8 +715,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">iprange
+        <term><emphasis role="bold">iprange</emphasis></term>
-        </emphasis><replaceable>address1</replaceable>-<replaceable>address2</replaceable></term>
 
         <listitem>
           <para>Iprange decomposes the specified range of IP addresses into
@@ -884,8 +724,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">iptrace </emphasis><replaceable>iptables
+        <term><emphasis role="bold">iptrace</emphasis></term>
-        match expression</replaceable></term>
 
         <listitem>
           <para>This is a low-level debugging command that causes iptables
@@ -904,17 +743,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">list</emphasis></term>
+        <term><emphasis role="bold">logdrop</emphasis></term>
-
-        <listitem>
-          <para><command>list</command> is a synonym for
-          <command>show</command> -- please see below.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">logdrop
-        </emphasis><replaceable>address</replaceable></term>
 
         <listitem>
           <para>Causes traffic from the listed <emphasis>address</emphasis>es
@@ -925,8 +754,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">logwatch </emphasis>[-<option>m</option>]
+        <term><emphasis role="bold">logwatch</emphasis></term>
-        [<replaceable>refresh-interval</replaceable>]</term>
 
         <listitem>
           <para>Monitors the log file specified by the LOGFILE option in
@@ -945,8 +773,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">logreject
+        <term><emphasis role="bold">logreject</emphasis></term>
-        </emphasis><replaceable>address</replaceable></term>
 
         <listitem>
           <para>Causes traffic from the listed <emphasis>address</emphasis>es
@@ -957,17 +784,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">ls</emphasis></term>
+        <term><emphasis role="bold">noiptrace</emphasis></term>
-
-        <listitem>
-          <para><command>ls</command> is a synonym for <command>show</command>
-          -- please see below.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">noiptrace </emphasis><replaceable>iptables
-        match expression</replaceable></term>
 
         <listitem>
           <para>This is a low-level debugging command that cancels a trace
@@ -980,78 +797,21 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">open</emphasis>
+        <term><emphasis role="bold">reset</emphasis></term>
-        <replaceable>source</replaceable> <replaceable>dest</replaceable> [
-        <replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
-        ] ]</term>
 
         <listitem>
-          <para>Added in Shorewall 4.6.8. This command requires that the
+          <para>All the packet and byte counters in the firewall are
-          firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in
+          reset.</para>
-          <ulink url="/manpages/shorewall.conf.html">shorewall.conf
-          (5)</ulink>. The effect of the command is to temporarily open the
-          firewall for connections matching the parameters.</para>
-
-          <para>The <replaceable>source</replaceable> and
-          <replaceable>dest</replaceable> parameters may each be specified as
-          <emphasis role="bold">all</emphasis> if you don't wish to restrict
-          the connection source or destination respectively. Otherwise, each
-          must contain a host or network address or a valid DNS name.</para>
-
-          <para>The <replaceable>protocol</replaceable> may be specified
-          either as a number or as a name listed in /etc/protocols. The
-          <replaceable>port</replaceable> may be specified numerically or as a
-          name listed in /etc/services.</para>
-
-          <para>To reverse the effect of a successful <command>open</command>
-          command, use the <command>close</command> command with the same
-          parameters or simply restart the firewall.</para>
-
-          <para>Example: To open the firewall for SSH connections to address
-          192.168.1.1, the command would be:</para>
-
-          <programlisting>    shorewall-lite open all 192.168.1.1 tcp 22</programlisting>
-
-          <para>To reverse that command, use:</para>
-
-          <screen>    shorewall-lite close all 192.168.1.1 tcp 22</screen>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">reenable</emphasis>{
+        <term><emphasis role="bold">restart</emphasis></term>
-        <replaceable>interface</replaceable> |
-        <replaceable>provider</replaceable> }</term>
 
         <listitem>
-          <para>Added in Shorewall 4.6.9. This is equivalent to a
+          <para>Restart is similar to <emphasis role="bold">shorewall-lite
-          <command>disable</command> command followed by an
+          start</emphasis> except that it assumes that the firewall is already
-          <command>enable</command> command on the specified
+          started. Existing connections are maintained.</para>
-          <replaceable>interface</replaceable> or
-          <replaceable>provider</replaceable>.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">reject</emphasis><replaceable>
-        address</replaceable></term>
-
-        <listitem>
-          <para>Causes traffic from the listed <emphasis>address</emphasis>es
-          to be silently rejected.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">reload </emphasis>[-n] [-p]
-        [-<option>C</option>]</term>
-
-        <listitem>
-          <para>Added in Shorewall 5.0.0, <emphasis
-          role="bold">reload</emphasis> is similar to <emphasis
-          role="bold">shorewall-lite start</emphasis> except that it assumes
-          that the firewall is already started. Existing connections are
-          maintained.</para>
 
           <para>The <option>-n</option> option causes Shorewall-lite to avoid
           updating the routing table(s).</para>
@@ -1059,56 +819,11 @@
           <para>The <option>-p</option> option causes the connection tracking
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
-
-          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
-          If the specified (or implicit) firewall script is the one that
-          generated the current running configuration, then the running
-          netfilter configuration will be reloaded as is so as to preserve the
-          iptables packet and byte counters.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">reset [<replaceable>chain</replaceable>,
+        <term><emphasis role="bold">restore</emphasis></term>
-        ...]</emphasis><acronym/></term>
-
-        <listitem>
-          <para>Resets the packet and byte counters in the specified
-          <replaceable>chain</replaceable>(s). If no
-          <replaceable>chain</replaceable> is specified, all the packet and
-          byte counters in the firewall are reset.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">restart </emphasis>[-n] [-p]
-        [-<option>C</option>]</term>
-
-        <listitem>
-          <para>Beginning with Shorewall 5.0.0, this command performs a true
-          restart. The firewall is completely stopped as if a
-          <command>stop</command> command had been issued then it is started
-          again.</para>
-
-          <para>The <option>-n</option> option causes Shorewall-lite to avoid
-          updating the routing table(s).</para>
-
-          <para>The <option>-p</option> option causes the connection tracking
-          table to be flushed; the <command>conntrack</command> utility must
-          be installed to use this option.</para>
-
-          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
-          If the specified (or implicit) firewall script is the one that
-          generated the current running configuration, then the running
-          netfilter configuration will be reloaded as is so as to preserve the
-          iptables packet and byte counters.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">restore </emphasis>[-<option>n</option>]
-        [-<option>p</option>] [-<option>C</option>] [
-        <replaceable>filename</replaceable> ]</term>
 
         <listitem>
           <para>Restore Shorewall-lite to a state saved using the <emphasis
@@ -1119,34 +834,11 @@
           <emphasis>filename</emphasis> is given then Shorewall-lite will be
           restored from the file specified by the RESTOREFILE option in <ulink
           url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>
-
-          <caution>
-            <para>If your iptables ruleset depends on variables that are
-            detected at run-time, either in your params file or by
-            Shorewall-generated code, <command>restore</command> will use the
-            values that were current when the ruleset was saved, which may be
-            different from the current values.</para>
-          </caution>
-
-          <para>The <option>-n</option> option causes Shorewall to avoid
-          updating the routing table(s).</para>
-
-          <para>The <option>-p</option> option, added in Shorewall 4.6.5,
-          causes the connection tracking table to be flushed; the
-          <command>conntrack</command> utility must be installed to use this
-          option.</para>
-
-          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
-          If the <option>-C</option> option was specified during <emphasis
-          role="bold">shorewall save</emphasis>, then the counters saved by
-          that operation will be restored.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">run
+        <term><emphasis role="bold">run</emphasis></term>
-        </emphasis><replaceable>command</replaceable> [
-        <replaceable>parameter</replaceable> ... ]</term>
 
         <listitem>
           <para>Added in Shorewall 4.6.3. Executes
@@ -1163,8 +855,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">save </emphasis>[-<option>C</option>] [
+        <term><emphasis role="bold">save</emphasis></term>
-        <replaceable>filename</replaceable> ]</term>
 
         <listitem>
           <para>The dynamic blacklist is stored in
@@ -1174,24 +865,6 @@
           <emphasis>filename</emphasis> is not given then the state is saved
           in the file specified by the RESTOREFILE option in <ulink
           url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>
-
-          <para>The <option>-C</option> option, added in Shorewall 4.6.5,
-          causes the iptables packet and byte counters to be saved along with
-          the chains and rules.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">savesets</emphasis></term>
-
-        <listitem>
-          <para>Added in shorewall 4.6.8. Performs the same action as the
-          <command>stop</command> command with respect to saving ipsets (see
-          the SAVE_IPSETS option in <ulink
-          url="/manpages/shorewall.conf.html">shorewall.conf</ulink> (5)).
-          This command may be used to proactively save your ipset contents in
-          the event that a system failure occurs prior to issuing a
-          <command>stop</command> command.</para>
         </listitem>
       </varlistentry>
 
@@ -1204,8 +877,7 @@
 
           <variablelist>
             <varlistentry>
-              <term><emphasis role="bold">bl|blacklists
+              <term><emphasis role="bold">bl|blacklists</emphasis></term>
-              </emphasis>[-<option>x</option>]</term>
 
               <listitem>
                 <para>Added in Shorewall 4.6.2. Displays the dynamic chain
@@ -1218,8 +890,7 @@
             </varlistentry>
 
             <varlistentry>
-              <term>[-<option>f</option>] <emphasis
+              <term><emphasis role="bold">capabilities</emphasis></term>
-              role="bold">capabilities</emphasis></term>
 
               <listitem>
                 <para>Displays your kernel/iptables capabilities. The
@@ -1230,10 +901,8 @@
             </varlistentry>
 
             <varlistentry>
-              <term>[-<option>b</option>] [-<option>x</option>]
+              <term>[ [ <option>chain</option> ] <emphasis>chain</emphasis>...
-              [-<option>l</option>] [-<option>t</option>
+              ]</term>
-              {<option>filter</option>|<option>mangle</option>|<option>nat</option>|<option>raw</option>|<option>rawpost</option>}]
-              [ <emphasis>chain</emphasis>... ]</term>
 
               <listitem>
                 <para>The rules in each <emphasis>chain</emphasis> are
@@ -1286,19 +955,11 @@
             </varlistentry>
 
             <varlistentry>
-              <term><emphasis role="bold">connections
+              <term><emphasis role="bold">connections</emphasis></term>
-              [<replaceable>filter_parameter</replaceable>
-              ...]</emphasis></term>
 
               <listitem>
                 <para>Displays the IP connections currently being tracked by
                 the firewall.</para>
-
-                <para>If the <command>conntrack</command> utility is
-                installed, beginning with Shorewall 4.6.11 the set of
-                connections displayed can be limited by including conntrack
-                filter parameters (-p , -s, --dport, etc). See conntrack(8)
-                for details.</para>
               </listitem>
             </varlistentry>
 
@@ -1340,8 +1001,7 @@
             </varlistentry>
 
             <varlistentry>
-              <term>[-<option>m</option>] <emphasis
+              <term><emphasis role="bold">log</emphasis></term>
-              role="bold">log</emphasis></term>
 
               <listitem>
                 <para>Displays the last 20 Shorewall-lite messages from the
@@ -1353,20 +1013,6 @@
               </listitem>
             </varlistentry>
 
-            <varlistentry>
-              <term>[-<option>x</option>] <emphasis
-              role="bold">mangle</emphasis></term>
-
-              <listitem>
-                <para>Displays the Netfilter mangle table using the command
-                <emphasis role="bold">iptables -t mangle -L -n -v</emphasis>.
-                The <emphasis role="bold">-x</emphasis> option is passed
-                directly through to iptables and causes actual packet and byte
-                counts to be displayed. Without this option, those counts are
-                abbreviated.</para>
-              </listitem>
-            </varlistentry>
-
             <varlistentry>
               <term><emphasis role="bold">marks</emphasis></term>
 
@@ -1390,16 +1036,6 @@
               </listitem>
             </varlistentry>
 
-            <varlistentry>
-              <term><emphasis role="bold">opens</emphasis></term>
-
-              <listitem>
-                <para>Added in Shorewall 4.5.8. Displays the iptables rules in
-                the 'dynamic' chain created through use of the <command>open
-                </command>command..</para>
-              </listitem>
-            </varlistentry>
-
             <varlistentry>
               <term><emphasis role="bold">policies</emphasis></term>
 
@@ -1416,9 +1052,7 @@
               <term><emphasis role="bold">routing</emphasis></term>
 
               <listitem>
-                <para>Displays the system's IPv4 routing configuration. The -c
+                <para>Displays the system's IPv4 routing configuration.</para>
-                option causes the route cache to be displayed in addition to
-                the other routing information.</para>
               </listitem>
             </varlistentry>
 
@@ -1457,9 +1091,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">start</emphasis> [-<option>p</option>]
+        <term><emphasis role="bold">start</emphasis></term>
-        [-<option>n</option>] [<option>-f</option>]
-        [-<option>C</option>]</term>
 
         <listitem>
           <para>Start Shorewall Lite. Existing connections through
@@ -1470,22 +1102,6 @@
           <para>The <option>-p</option> option causes the connection tracking
           table to be flushed; the <command>conntrack</command> utility must
           be installed to use this option.</para>
-
-          <para>The <option>-n</option> option prevents the firewall script
-          from modifying the current routing configuration.</para>
-
-          <para>The <option>-f</option> option was added in Shorewall 4.6.5.
-          If the RESTOREFILE named in <ulink
-          url="shorewall.conf.html">shorewall.conf</ulink>(5) exists, is
-          executable and is not older than the current filewall script, then
-          that saved configuration is restored.</para>
-
-          <para>The <option>-C</option> option was added in Shorewall 4.6.5
-          and is only meaningful when the <option>-f</option> option is also
-          specified. If the previously-saved configuration is restored, and if
-          the <option>-C</option> option was also specified in the <emphasis
-          role="bold">save</emphasis> command, then the packet and byte
-          counters will be restored.</para>
         </listitem>
       </varlistentry>
 

Shorewall-lite/shorecap

@@ -38,7 +38,7 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
-#        MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
+#        MODULE_SUFFIX - "o gz ko o.gz ko.gz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not

Shorewall-lite/shorewall-lite.conf

@@ -1,5 +1,5 @@
 ###############################################################################
-#  /etc/shorewall-lite/shorewall-lite.conf Version 5 - Change the following
+#  /etc/shorewall-lite/shorewall-lite.conf Version 4 - Change the following
 #  variables to override the values in the shorewall.conf file used to
 #  compile /var/lib/shorewall-lite/firewall. Those values may be found in
 #  /var/lib/shorewall-lite/firewall.conf.

Shorewall-lite/shorewall-lite.service

@@ -5,8 +5,7 @@
 #
 [Unit]
 Description=Shorewall IPv4 firewall (lite)
-Wants=network-online.target
+After=network.target
-After=network-online.target
 Conflicts=iptables.service firewalld.service
 
 [Service]
@@ -14,7 +13,7 @@ Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-lite
 StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
+ExecStart=/sbin/shorewall-lite $OPTIONS start
 ExecStop=/sbin/shorewall-lite $OPTIONS stop
 
 [Install]

Shorewall-lite/shorewall-lite.service.214

@@ -1,21 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv4 firewall (lite)
-Wants=network-online.target
-After=network-online.target
-Conflicts=iptables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall-lite
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall-lite $OPTIONS stop
-
-[Install]
-WantedBy=basic.target

Shorewall-lite/shorewall-lite.service.debian

@@ -1,22 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv4 firewall (lite)
-Wants=network-online.target
-After=network-online.target
-Conflicts=iptables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/default/shorewall-lite
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall-lite $OPTIONS stop
-ExecReload=/sbin/shorewall-lite $OPTIONS reload $RELOADOPTIONS
-
-[Install]
-WantedBy=basic.target

Shorewall-lite/uninstall.sh

@@ -40,12 +40,6 @@ usage() # $1 = exit status
     exit $1
 }
 
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
 qt()
 {
     "$@" >/dev/null 2>&1

Shorewall/INSTALL

@@ -1,4 +1,4 @@
-Shoreline Firewall (Shorewall) Version 5
+Shoreline Firewall (Shorewall) Version 4
 -----         ----
 
 -----------------------------------------------------------------------------

Shorewall/Macros/macro.AMQP

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - AMQP Macro
+# Shorewall version 4 - AMQP Macro
 #
 # /usr/share/shorewall/macro.AMQP
 #
 #	This macro handles AMQP traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5672

Shorewall/Macros/macro.A_AllowICMPs

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - Audited AllowICMPs Macro
+# Shorewall version 4 - Audited AllowICMPs Macro
 #
 # /usr/share/shorewall/macro.A_AllowICMPs
 #
 #	This macro A_ACCEPTs needed ICMP types
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION		SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #					PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.A_DropDNSrep

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - Audited DropDNSrep Macro
+# Shorewall version 4 - Audited DropDNSrep Macro
 #
 # /usr/share/shorewall/macro.A_DropDNSrep
 #
 #	This macro silently audites and drops DNS UDP replies
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.A_DropUPnP

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - ADropUPnP Macro
+# Shorewall version 4 - ADropUPnP Macro
 #
 # /usr/share/shorewall/macro.A_DropUPnP
 #
 #	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.ActiveDir

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - Samba 4 Macro
+# Shorewall version 4 - Samba 4 Macro
 #
 # /usr/share/shorewall/macro.ActiveDir
 #
@@ -9,8 +9,8 @@
 #
 # 
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#ACTION SOURCE  DEST    PROTO   DEST    SOURCE  RATE    USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+#                               PORT(S) PORT(S) LIMIT   GROUP
 PARAM   -       -       tcp     389 	#LDAP services
 PARAM   -       -       udp	389  
 PARAM   -       -       tcp     636	#LDAP SSL

Shorewall/Macros/macro.AllowICMPs

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - AllowICMPs Macro
+# Shorewall version 4 - AllowICMPs Macro
 #
 # /usr/share/shorewall/macro.AllowICMPs
 #
 #	This macro ACCEPTs needed ICMP types
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.Amanda

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - Amanda Macro
+# Shorewall version 4 - Amanda Macro
 #
 # /usr/share/shorewall/macro.Amanda
 #
@@ -8,6 +8,8 @@
 #	files from those nodes.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.Auth

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - Auth Macro
+# Shorewall version 4 - Auth Macro
 #
 # /usr/share/shorewall/macro.Auth
 #
 #	This macro handles Auth (identd) traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	113

Shorewall/Macros/macro.BGP

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - BGP Macro
+# Shorewall version 4 - BGP Macro
 #
 # /usr/share/shorewall/macro.BGP
 #
 #	This macro handles BGP4 traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	179	# BGP4

Shorewall/Macros/macro.BLACKLIST

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - blacklist Macro
+# Shorewall version 4 - blacklist Macro
 #
 # /usr/share/shorewall/macro.blacklist
 #
 #	This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if $BLACKLIST_LOGLEVEL

Shorewall/Macros/macro.BitTorrent

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - BitTorrent Macro
+# Shorewall version 4 - BitTorrent Macro
 #
 # /usr/share/shorewall/macro.BitTorrent
 #
@@ -9,6 +9,8 @@
 #	BitTorrent32 macro.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6889

Shorewall/Macros/macro.BitTorrent32

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - BitTorrent 3.2 Macro
+# Shorewall version 4 - BitTorrent 3.2 Macro
 #
 # /usr/share/shorewall/macro.BitTorrent32
 #
 #	This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6999

Shorewall/Macros/macro.CVS

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - CVS Macro
+# Shorewall version 4 - CVS Macro
 #
 # /usr/share/shorewall/macro.CVS
 #
 #	This macro handles connections to the CVS pserver.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2401

Shorewall/Macros/macro.Citrix

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - Citrix/ICA Macro
+# Shorewall version 4 - Citrix/ICA Macro
 #
 # /usr/share/shorewall/macro.Citrix
 #
@@ -7,6 +7,8 @@
 #	ICA Session Reliability)
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1494	# ICA

Shorewall/Macros/macro.DAAP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - DAAP Macro
+# Shorewall version 4 - DAAP Macro
 #
 # /usr/share/shorewall/macro.DAAP
 #
@@ -7,6 +7,8 @@
 #	The protocol is used by iTunes, Rythmbox and other similar daemons.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3689

Shorewall/Macros/macro.DCC

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - DCC Macro
+# Shorewall version 4 - DCC Macro
 #
 # /usr/share/shorewall/macro.DCC
 #
@@ -7,6 +7,8 @@
 #	DCC is a distributed spam filtering mechanism.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	6277

Shorewall/Macros/macro.DHCPfwd

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - DHCPfwd Macro
+# Shorewall version 4 - DHCPfwd Macro
 #
 # /usr/share/shorewall/macro.DHCPfwd
 #
 #	This macro (bidirectional) handles forwarded DHCP traffic
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	67:68	67:68	# DHCP

Shorewall/Macros/macro.DNS

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - DNS Macro
+# Shorewall version 4 - DNS Macro
 #
 # /usr/share/shorewall/macro.DNS
 #
 #	This macro handles DNS traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	53

Shorewall/Macros/macro.Distcc

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - Distcc Macro
+# Shorewall version 4 - Distcc Macro
 #
 # /usr/share/shorewall/macro.Distcc
 #
 #	This macro handles connections to the Distributed Compiler service.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3632

Shorewall/Macros/macro.Drop

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - Drop Macro
+# Shorewall version 4 - Drop Macro
 #
 # /usr/share/shorewall/macro.Drop
 #
@@ -11,6 +11,8 @@
 #		Drop	net	all
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 #

Shorewall/Macros/macro.DropDNSrep

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - DropDNSrep Macro
+# Shorewall version 4 - DropDNSrep Macro
 #
 # /usr/share/shorewall/macro.DropDNSrep
 #
 #	This macro silently drops DNS UDP replies
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.DropUPnP

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - DropUPnP Macro
+# Shorewall version 4 - DropUPnP Macro
 #
 # /usr/share/shorewall/macro.DropUPnP
 #
 #	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.Edonkey

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - Edonkey Macro
+# Shorewall version 4 - Edonkey Macro
 #
 # /usr/share/shorewall/macro.Edonkey
 #
@@ -28,6 +28,8 @@
 #	applications such as aMule WebServer or aMuleCMD.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	4662

Shorewall/Macros/macro.FTP

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - FTP Macro
+# Shorewall version 4 - FTP Macro
 #
 # /usr/share/shorewall/macro.FTP
 #
 #	This macro handles FTP traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __FTP_HELPER  )

Shorewall/Macros/macro.Finger

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - Finger Macro
+# Shorewall version 4 - Finger Macro
 #
 # /usr/share/shorewall/macro.Finger
 #
@@ -7,6 +7,8 @@
 #	your finger information to internet.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	79

Shorewall/Macros/macro.GNUnet

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - GNUnet Macro
+# Shorewall version 4 - GNUnet Macro
 #
 # /usr/share/shorewall/macro.GNUnet
 #
 #	This macro handles GNUnet (secure peer-to-peer networking) traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2086

Shorewall/Macros/macro.GRE

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - GRE Macro
+# Shorewall version 4 - GRE Macro
 #
 # /usr/share/shorewall/macro.GRE
 #
@@ -7,6 +7,8 @@
 #	traffic (RFC 1701)
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	47	# GRE

Shorewall/Macros/macro.Git

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - Git Macro
+# Shorewall version 4 - Git Macro
 #
 # /usr/share/shorewall/macro.Git
 #
 #	This macro handles Git traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9418

Shorewall/Macros/macro.Gnutella

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - Gnutella Macro
+# Shorewall version 4 - Gnutella Macro
 #
 # /usr/share/shorewall/macro.Gnutella
 #
 #	This macro handles Gnutella traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6346

Shorewall/Macros/macro.Goto-Meeting

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - Citrix/Goto Meeting macro
+# Shorewall version 4 - Citrix/Goto Meeting macro
 #
 # /usr/share/shorewall/macro.Goto-Meeting
 #          by Eric Teeter
@@ -7,6 +7,6 @@
 #       Assumes that ports 80 and 443 are already open
 #       If needed, use the macros that open Http and Https to reduce redundancy
 ####################################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#ACTION	   SOURCE	DEST    PROTO   DEST    SOURCE  RATE    USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+#                                       PORT(S) PORT(S) LIMIT   GROUP
 PARAM      -         	-       tcp     8200    # Goto Meeting only needed (TCP outbound)

Shorewall/Macros/macro.HKP

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - HKP Macro
+# Shorewall version 4 - HKP Macro
 #
 # /usr/share/shorewall/macro.HKP
 #
 #	This macro handles OpenPGP HTTP keyserver protocol traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	11371

Shorewall/Macros/macro.HTTP

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - HTTP Macro
+# Shorewall version 4 - HTTP Macro
 #
 # /usr/share/shorewall/macro.HTTP
 #
 #	This macro handles plaintext HTTP (WWW) traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	80

Shorewall/Macros/macro.HTTPS

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - HTTPS Macro
+# Shorewall version 4 - HTTPS Macro
 #
 # /usr/share/shorewall/macro.HTTPS
 #
 #	This macro handles HTTPS (WWW over SSL) traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	443

Shorewall/Macros/macro.ICPV2

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - ICPV2 Macro
+# Shorewall version 4 - ICPV2 Macro
 #
 # /usr/share/shorewall/macro.ICPV2
 #
 #	This macro handles Internet Cache Protocol V2 (Squid) traffic
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	3130

Shorewall/Macros/macro.ICQ

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - ICQ Macro
+# Shorewall version 4 - ICQ Macro
 #
 # /usr/share/shorewall/macro.ICQ
 #
 #	This macro handles ICQ, now called AOL Instant Messenger (or AIM).
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5190

Shorewall/Macros/macro.ILO

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - ILO Macro
+# Shorewall version 4 - ILO Macro
 #
 # /usr/share/shorewall/macro.ILO
 #
@@ -8,6 +8,8 @@
 #	workstations.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3002		# Raw serial data

Shorewall/Macros/macro.IMAP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - IMAP Macro
+# Shorewall version 4 - IMAP Macro
 #
 # /usr/share/shorewall/macro.IMAP
 #
@@ -7,6 +7,8 @@
 #	see macro.IMAPS.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	143

Shorewall/Macros/macro.IMAPS

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - IMAPS Macro
+# Shorewall version 4 - IMAPS Macro
 #
 # /usr/share/shorewall/macro.IMAPS
 #
@@ -7,6 +7,8 @@
 #	(not recommended), see macro.IMAP.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	993

Shorewall/Macros/macro.IPIP

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - IPIP Macro
+# Shorewall version 4 - IPIP Macro
 #
 # /usr/share/shorewall/macro.IPIP
 #
 #	This macro (bidirectional) handles IPIP capsulation traffic
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	94	# IPIP

Shorewall/Macros/macro.IPMI

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - IPMI Macro
+# Shorewall version 4 - IPMI Macro
 #
 # /usr/share/shorewall/macro.IPMI
 #
@@ -9,6 +9,8 @@
 #	workstations.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	623		# RMCP

Shorewall/Macros/macro.IPP

@@ -6,6 +6,8 @@
 #	This macro handles Internet Printing Protocol (IPP).
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	631

Shorewall/Macros/macro.IPPbrd

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - IPP Broadcast Macro
+# Shorewall version 4 - IPP Broadcast Macro
 #
 # /usr/share/shorewall/macro.IPPbrd
 #
@@ -8,6 +8,8 @@
 #       direction, use the IPPserver Macro
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	631

Shorewall/Macros/macro.IPPserver

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - IPPserver Macro
+# Shorewall version 4 - IPPserver Macro
 #
 # /usr/share/shorewall/macro.IPPserver
 #
@@ -23,6 +23,8 @@
 #		IPPserver/ACCEPT $FW loc
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	SOURCE	DEST	tcp	631

Shorewall/Macros/macro.IPsec

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - IPsec Macro
+# Shorewall version 4 - IPsec Macro
 #
 # /usr/share/shorewall/macro.IPsec
 #
 #	This macro (bidirectional) handles IPsec traffic
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecah

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - IPsecah Macro
+# Shorewall version 4 - IPsecah Macro
 #
 # /usr/share/shorewall/macro.IPsecah
 #
@@ -7,6 +7,8 @@
 #       This is insecure. You should use ESP with encryption for security.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecnat

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - IPsecnat Macro
+# Shorewall version 4 - IPsecnat Macro
 #
 # /usr/share/shorewall/macro.IPsecnat
 #
 #	This macro (bidirectional) handles IPsec traffic and Nat-Traversal
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	# IKE

Shorewall/Macros/macro.IRC

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 IRC Macro
+# Shorewall version 4 IRC Macro
 #
 # /usr/share/shorewall/macro.IRC
 #
 #	This macro handles IRC traffic (Internet Relay Chat).
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 

Shorewall/Macros/macro.JAP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - JAP Macro
+# Shorewall version 4 - JAP Macro
 #
 # /usr/share/shorewall/macro.JAP
 #
@@ -8,6 +8,8 @@
 #	to browse anonymously!
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	8080 # HTTP port

Shorewall/Macros/macro.Jabber

@@ -1,11 +0,0 @@
-#
-# Shorewall version 5 - Jabber Macro
-#
-# /usr/share/shorewall/macro.Jabber
-#
-#	This macro accepts Jabber traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
-PARAM	-	-	tcp	5222

Shorewall/Macros/macro.JabberPlain

@@ -1,12 +1,13 @@
 #
-# Shorewall version 5 - JabberPlain Macro
+# Shorewall version 3.4 - JabberPlain Macro
 #
 # /usr/share/shorewall/macro.JabberPlain
 #
-#	This macro accepts Jabber traffic (plaintext). This macro is
+#	This macro accepts Jabber traffic (plaintext).
-#	deprecated - use of macro.Jabber instead is recommended.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
-Jabber
+PARAM	-	-	tcp	5222

Shorewall/Macros/macro.JabberSecure

@@ -1,13 +1,13 @@
 #
-# Shorewall version 5 - JabberSecure (SSL) Macro
+# Shorewall version 3.4 - JabberSecure (ssl) Macro
 #
 # /usr/share/shorewall/macro.JabberSecure
 #
-#	This macro accepts Jabber traffic (SSL). Use of Jabber with SSL
+#	This macro accepts Jabber traffic (ssl).
-#	is deprecated, please configure Jabber with STARTTLS and use
-#	Jabber macro instead.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5223

Shorewall/Macros/macro.Jabberd

@@ -6,6 +6,8 @@
 #	This macro accepts Jabberd intercommunication traffic
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5269

Shorewall/Macros/macro.Jetdirect

@@ -6,6 +6,8 @@
 #	This macro handles HP Jetdirect printing.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9100

Shorewall/Macros/macro.Kerberos

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - Kerberos Macro
+# Shorewall version 4 - Kerberos Macro
 #
 # /usr/share/shorewall/macro.Kerberos
 #
 #	This macro handles Kerberos traffic.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	88

Shorewall/Macros/macro.L2TP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - L2TP Macro
+# Shorewall version 4 - L2TP Macro
 #
 # /usr/share/shorewall/macro.L2TP
 #
@@ -7,6 +7,8 @@
 #	(RFC 2661)
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	1701	# L2TP

Shorewall/Macros/macro.LDAP

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - LDAP Macro
+# Shorewall version 4 - LDAP Macro
 #
 # /usr/share/shorewall/macro.LDAP
 #
@@ -11,6 +11,8 @@
 #	Consult your LDAP server documentation for details.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	389

Shorewall/Macros/macro.LDAPS

@@ -1,5 +1,5 @@
 #
-# Shorewall version 5 - LDAPS Macro
+# Shorewall version 4 - LDAPS Macro
 #
 # /usr/share/shorewall/macro.LDAPS
 #
@@ -11,6 +11,8 @@
 #	Consult your LDAP server documentation for details.
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	636

Shorewall/Macros/macro.MSNP

@@ -1,11 +1,13 @@
 #
-# Shorewall version 5 - MSNP Macro
+# Shorewall version 4 - MSNP Macro
 #
 # /usr/share/shorewall/macro.MSNP
 #
 #	This macro handles MSNP (MicroSoft Notification Protocol)
 #
 ###############################################################################
+?FORMAT 2
+###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
 #				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1863