Avoid silly duplicate rules

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/lib.cli

@@ -339,7 +339,15 @@ show_classifiers() {
 #
 # Display blacklist chains
 #
+blacklist_filter() {
+    awk \
+	'BEGIN          { prnt=0; }; \
+        /^Members:/     { print "Dynamic:"; prnt=1; next; }; \
+                        { if (prnt == 1) print; };'
+}
+
 show_bl() {
+    [ -n "$g_blacklistipset" ] && ipset -L $g_blacklistipset | blacklist_filter && echo
     $g_tool -L $g_ipt_options | \
 	awk 'BEGIN           {prnt=0; };
             /^$/             {if (prnt == 1) print ""; prnt=0; };
@@ -723,12 +731,29 @@ list_zone() {
     done
 }
 
+option_error() {
+    fatal_error "The $COMMAND command does not accept this option: -$1"
+}
+
+too_many_arguments() {
+    fatal_error "Too many arguments: $1"
+}
+
+missing_argument() {
+    fatal_error "Missing argument"
+}
+
+missing_option_value() {
+    fatal_error "The $1 option requires a value"
+}
+
 version_command() {
     local finished
     finished=0
     local all
     all=
     local product
+    local compiletime
 
     while [ $finished -eq 0 -a $# -gt 0 ]; do
 	option=$1
@@ -747,7 +772,7 @@ version_command() {
 			    option=${option#a}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -759,7 +784,7 @@ version_command() {
 	esac
     done
 
-    [ $# -gt 0 ] && usage 1
+    [ $# -gt 0 ] && too_many_arguments
 
     if [ -n "$all" ]; then
 	echo "shorewall-core: $(cat ${SHAREDIR}/shorewall/coreversion)"
@@ -771,8 +796,16 @@ version_command() {
 	done
 
 	if [ "$(id -u)" -eq 0 -a -f $g_firewall ]; then
-	    echo $g_echo_n "$g_firewall was compiled by Shorewall version "
-	    $g_firewall version
+	    compiletime=$(run_it $g_firewall info 2>/dev/null)
+
+	    case $compiletime in
+		compiled\ *)
+		    echo "$g_firewall was $compiletime"
+		    ;;
+		*)
+		    echo "$g_firewall was compiled by Shorewall version $(run_it $g_firewall version))"
+		    ;;
+	    esac
 	fi
     else
 	echo $SHOREWALL_VERSION
@@ -1057,7 +1090,7 @@ show_connections() {
 	    shift
 	    conntrack -f ipv4 -L $@ | show_connections_filter
 	else
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments
 	    if [ -f /proc/net/ip_conntrack ]; then
 		cat /proc/net/ip_conntrack | show_connections_filter
 	    else
@@ -1070,7 +1103,7 @@ show_connections() {
 	echo
 	conntrack -f ipv6 -L $@ | show_connections_filter
     else
-	[ $# -gt 1 ] && usage 1
+	[ $# -gt 1 ] && too_many_arguments
 	if [ -f /proc/sys/net/netfilter/nf_conntrack_count -a -f /proc/sys/net/nf_conntrack ]; then
 	    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
 	    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
@@ -1191,7 +1224,7 @@ show_command() {
 			    option=${option#f}
 			    ;;
 			t)
-			    [ $# -eq 1 ] && usage 1
+			    [ $# -eq 1 ] && missing_option_value -t
 
 			    case $2 in
 				mangle|nat|filter|raw|rawpost)
@@ -1219,7 +1252,7 @@ show_command() {
 			    option=${option#b}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1241,37 +1274,37 @@ show_command() {
 	    eval show_connections $@ $g_pager
 	    ;;
 	nat)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_nat $g_pager
 	    ;;
 	raw)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_raw $g_pager
 	    ;;
 	rawpost)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_rawpost $g_pager
 	    ;;
 	tos|mangle)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_mangle $g_pager
 	    ;;
 	log)
-	    [ $# -gt 2 ] && usage 1
+	    [ $# -gt 2 ] && too_many_arguments $2
 
 	    setup_logread
 	    eval show_log $g_pager
 	    ;;
 	tc)
-	    [ $# -gt 2 ] && usage 1
+	    [ $# -gt 2 ] && too_many_arguments $2
 	    eval show_tc $@ $g_pager
 	    ;;
 	classifiers|filters)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_classifiers_command $g_pager
 	    ;;
 	zones)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    if [ -f ${VARDIR}/zones ]; then
 		echo "$g_product $SHOREWALL_VERSION Zones at $g_hostname - $(date)"
 		echo
@@ -1294,7 +1327,7 @@ show_command() {
 	    fi
 	    ;;
 	capabilities)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    determine_capabilities
 	    VERBOSITY=2
 	    if [ -n "$g_filemode" ]; then
@@ -1304,11 +1337,11 @@ show_command() {
 	    fi
 	    ;;
 	ip)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_ip_addresses $g_pager
 	    ;;
 	routing)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_routing_command $g_pager
 	    ;;
 	config)
@@ -1337,26 +1370,26 @@ show_command() {
 	    echo $VARDIR;
 	    ;;
 	policies)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_policies $g_pager
 	    ;;
 	ipa)
-	    [ $g_family -eq 4 ] || usage 1
-	    [ $# -gt 1 ] && usage 1
+	    [ $g_family -eq 4 ] || fatal_error "'show ipa' is now available in $g_product"
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_ipa $g_pager
 	    ;;
 	marks)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    echo "$g_product $SHOREWALL_VERSION Mark Layout at $g_hostname - $(date)"
 	    echo
 	    [ -f ${VARDIR}/marks ] && cat ${VARDIR}/marks;
 	    ;;
 	nfacct)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_nfacct_command $g_pager
 	    ;;
 	arptables)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    resolve_arptables
 	    if [ -n "$arptables" -a -x $arptables ]; then
 		eval show_arptables $g_pager
@@ -1365,22 +1398,22 @@ show_command() {
 	    fi
 	    ;;
 	event)
-	    [ $# -gt 1 ] || usage 1
+	    [ $# -gt 1 ] || too_many_arguments $2
 	    echo "$g_product $SHOREWALL_VERSION events at $g_hostname - $(date)"
 	    echo
 	    shift
 	    show_events $@
 	    ;;
 	events)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_events_command $g_pager
 	    ;;
 	bl|blacklists)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_blacklists $g_pager
 	    ;;
 	opens)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    echo "$g_product $SHOREWALL_VERSION Temporarily opened connections at $g_hostname - $(date)"
 
 	    if chain_exists dynamic; then
@@ -1396,12 +1429,12 @@ show_command() {
 	    	*)
 		    case $1 in
 			actions)
-			    [ $# -gt 1 ] && usage 1
+			    [ $# -gt 1 ] && too_many_arguments $2
 			    eval show_actions_sorted $g_pager
 			    return
 			    ;;
 			macro)
-			    [ $# -ne 2 ] && usage 1
+			    [ $# -ne 2 ] && too_many_arguments $2
 			    for directory in $(split $CONFIG_PATH); do
 				if [ -f ${directory}/macro.$2 ]; then
 				    echo "Shorewall $SHOREWALL_VERSION Macro $2 at $g_hostname - $(date)"
@@ -1413,7 +1446,7 @@ show_command() {
 			    return
 			    ;;
 			macros)
-			    [ $# -gt 1 ] && usage 1
+			    [ $# -gt 1 ] && too_many_arguments $2
 			    eval show_macros $g_pager
 			    return
 			    ;;
@@ -1424,7 +1457,7 @@ show_command() {
 	    if [ $# -gt 0 ]; then
 		if [ $1 = dynamic -a $# -gt 1 ]; then
 		    shift
-		    [ $# -eq 1 ] || usage 1
+		    [ $# -eq 1 ] || too_many_arguments $2
 		    list_zone $1
 		    return;
                 fi
@@ -1499,6 +1532,49 @@ dump_filter_wrapper() {
     eval dump_filter $g_pager
 }
 
+show_status() {
+    local compiletime
+    local state
+
+    if product_is_started ; then
+	[ $VERBOSITY -ge 1 ] && echo "$g_product is running"
+	status=0
+    else
+	[ $VERBOSITY -ge 1 ] && echo "$g_product is stopped"
+	status=4
+    fi
+
+    if [ -f ${VARDIR}/state ]; then
+	state="$(cat ${VARDIR}/state)"
+	case $state in
+	    Stopped*|Closed*|Clear*)
+		status=3
+		;;
+	esac
+    else
+	state=Unknown
+    fi
+
+    if [ $VERBOSITY -ge 1 ]; then 
+	if [ -f $g_firewall ]; then
+	    compiletime=$(run_it $g_firewall info 2>/dev/null)
+
+	    case $compiletime in
+		compiled\ *)
+		    state="$state ($g_firewall $compiletime)"
+		    ;;
+		*)
+		    state="$state ($g_firewall compiled by Shorewall version $(run_it $g_firewall version))"
+		    ;;
+	    esac
+	fi
+
+	echo "State:$state"
+	echo
+    fi
+
+}
+
 #
 # Dump Command Executor
 #
@@ -1538,7 +1614,7 @@ do_dump_command() {
 			    option=${option#c}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1557,7 +1633,7 @@ do_dump_command() {
     [ $VERBOSITY -lt 2 ] && VERBOSITY=2
 
     [ -n "$g_debugging" ] && set -x
-    [ $# -eq 0 ] || usage 1
+    [ $# -eq 0 ] || too_many_arguments $1
     clear_term
     echo "$g_product $SHOREWALL_VERSION Dump at $g_hostname - $(date)"
     echo
@@ -1752,7 +1828,7 @@ restore_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error
 			    ;;
 		    esac
 		done
@@ -1772,7 +1848,7 @@ restore_command() {
 	validate_restorefile '<restore file>'
 	;;
     *)
-	usage 1
+	too_many_arguments $2
 	;;
     esac
 
@@ -2378,7 +2454,7 @@ hits_command() {
 			    option=${option#t}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -2390,7 +2466,7 @@ hits_command() {
 	esac
     done
 
-    [ $# -eq 0 ] || usage 1
+    [ $# -eq 0 ] || too_many_arguments $1
 
     clear_term
     echo "$g_product $SHOREWALL_VERSION Hits at $g_hostname - $(date)"
@@ -2446,21 +2522,46 @@ hits_command() {
 # 'allow' command executor
 #
 allow_command() {
+
     [ -n "$g_debugging" ] && set -x
-    [ $# -eq 1 ] && usage 1
+    [ $# -eq 1 ] && missing_argument
+
     if product_is_started ; then
+	local allowed
 	local which
 	which='-s'
 	local range
 	range='--src-range'
+	local dynexists
 
-	if ! chain_exists dynamic; then
+	if [ -n "$g_blacklistipset" ]; then
+
+	    case ${IPSET:=ipset} in
+		*/*)
+		    if [ ! -x "$IPSET" ]; then
+			fatal_error "IPSET=$IPSET does not exist or is not executable"
+		    fi
+		    ;;
+		*)
+		    IPSET="$(mywhich $IPSET)"
+		    [ -n "$IPSET" ] || fatal_error "The ipset utility cannot be located"
+		    ;;
+	    esac
+	fi
+
+	if chain_exists dynamic; then
+	    dynexists=Yes
+	elif [ -z "$g_blacklistipset" ]; then
 	    fatal_error "Dynamic blacklisting is not enabled in the current $g_product configuration"
 	fi
 
 	[ -n "$g_nolock" ] || mutex_on
+
 	while [ $# -gt 1 ]; do
 	    shift
+
+	    allowed=''
+
 	    case $1 in
 		from)
 		    which='-s'
@@ -2473,29 +2574,48 @@ allow_command() {
 		    continue
 		    ;;
 		*-*)
-		    if  qt $g_tool -D dynamic -m iprange $range $1 -j reject    ||\
-			qt $g_tool -D dynamic -m iprange $range $1 -j DROP      ||\
-			qt $g_tool -D dynamic -m iprange $range $1 -j logdrop   ||\
-			qt $g_tool -D dynamic -m iprange $range $1 -j logreject
+		    if [ -n "$g_blacklistipset" ]; then
+			if qt $IPSET -D $g_blacklistipset $1; then
+			    allowed=Yes
+			fi
+		    fi
+
+		    if [ -n "$dynexists" ]; then
+			if  qt $g_tool -D dynamic -m iprange $range $1 -j reject    ||\
+			    qt $g_tool -D dynamic -m iprange $range $1 -j DROP      ||\
+			    qt $g_tool -D dynamic -m iprange $range $1 -j logdrop   ||\
+			    qt $g_tool -D dynamic -m iprange $range $1 -j logreject
 			then
-			echo "$1 Allowed"
-		    else
-			echo "$1 Not Dropped or Rejected"
+			    allowed=Yes
+			fi
 		    fi
 		    ;;
 		*)
-		    if  qt $g_tool -D dynamic $which $1 -j reject    ||\
-			qt $g_tool -D dynamic $which $1 -j DROP      ||\
-			qt $g_tool -D dynamic $which $1 -j logdrop   ||\
-			qt $g_tool -D dynamic $which $1 -j logreject
+		    if [ -n "$g_blacklistipset" ]; then
+			if qt $IPSET -D $g_blacklistipset $1; then
+			    allowed=Yes
+			fi
+		    fi
+
+		    if [ -n "$dynexists" ]; then
+			if  qt $g_tool -D dynamic $which $1 -j reject    ||\
+			    qt $g_tool -D dynamic $which $1 -j DROP      ||\
+			    qt $g_tool -D dynamic $which $1 -j logdrop   ||\
+			    qt $g_tool -D dynamic $which $1 -j logreject
 			then
-			echo "$1 Allowed"
-		    else
-			echo "$1 Not Dropped or Rejected"
+			    allowed=Yes
+			fi
 		    fi
 		    ;;
 	    esac
+
+	    if [ -n "$allowed" ]; then
+		progress_message2 "$1 Allowed"
+	    else
+		error_message "WARNING: $1 already allowed (not dynamically blacklisted)"
+	    fi
 	done
+
 	[ -n "$g_nolock" ] || mutex_off
     else
 	error_message "ERROR: $g_product is not started"
@@ -2517,8 +2637,6 @@ logwatch_command() {
 	    -*)
 		option=${option#-}
 
-		[ -z "$option" ] && usage 1
-
 		while [ -n "$option" ]; do
 		    case $option in
 			v*)
@@ -2538,7 +2656,7 @@ logwatch_command() {
 			    option=
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -2557,7 +2675,7 @@ logwatch_command() {
     elif [ $# -eq 0 ]; then
 	logwatch 30
     else
-	usage 1
+	too_many_arguments $2
     fi
 }
 
@@ -3301,36 +3419,6 @@ report_capabilities1() {
     report_capabilities_unsorted1 | sort
 }
 
-show_status() {
-    if product_is_started ; then
-	[ $VERBOSITY -ge 1 ] && echo "$g_product is running"
-	status=0
-    else
-	[ $VERBOSITY -ge 1 ] && echo "$g_product is stopped"
-	status=4
-    fi
-
-    if [ -f ${VARDIR}/state ]; then
-	state="$(cat ${VARDIR}/state)"
-	case $state in
-	    Stopped*|Closed*|Clear*)
-		status=3
-		;;
-	esac
-    else
-	state=Unknown
-    fi
-
-    if [ $VERBOSITY -ge 1 ]; then 
-	if [ -f $g_firewall ]; then
-	    state="$state ($g_firewall compiled by Shorewall version $($g_firewall version))"
-	fi
-	echo "State:$state"
-	echo
-    fi
-
-}
-
 interface_status() {
     case $(cat $1) in
 	0)
@@ -3384,7 +3472,7 @@ status_command() {
 			    option=${option#i}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -3396,7 +3484,7 @@ status_command() {
 	esac
     done
 
-    [ $# -eq 0 ] || usage 1
+    [ $# -eq 0 ] || missing_argument
 
     [ $VERBOSITY -ge 1 ] && echo "${g_product}-$SHOREWALL_VERSION Status at $g_hostname - $(date)" && echo
     show_status
@@ -3444,6 +3532,29 @@ reject_command() {
     fi
 }
 
+blacklist_command() {
+    local family
+
+    [ $# -gt 0 ] || fatal_error "Missing address"
+
+    [ -z "$g_blacklistipset" ] && fatal_error "The blacklist command is not supported in the current $g_product configuration"
+
+    case ${IPSET:=ipset} in
+	*/*)
+	    if [ ! -x "$IPSET" ]; then
+		fatal_error "IPSET=$IPSET does not exist or is not executable"
+	    fi
+	    ;;
+	*)
+	    IPSET="$(mywhich $IPSET)"
+	    [ -n "$IPSET" ] || fatal_error "The ipset utility cannot be located"
+	    ;;
+    esac
+
+    $IPSET -A $g_blacklistipset $@ && progress_message2 "$1 Blacklisted" || { error_message "ERROR: Address $1 not blacklisted"; return 1; }
+
+    return 0
+}
 save_command() {
     local finished
     finished=0
@@ -3467,7 +3578,7 @@ save_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -3487,7 +3598,7 @@ save_command() {
 	    validate_restorefile '<restore file>'
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
 	esac
 
@@ -3506,6 +3617,9 @@ save_command() {
 
 forget_command() {
     case $# in
+	0)
+	    missing_argument
+	    ;;
 	1)
 	    ;;
 	2)
@@ -3513,7 +3627,7 @@ forget_command() {
 	    validate_restorefile '<restore file>'
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -3535,7 +3649,7 @@ ipcalc_command() {
     local address
     local vlsm
 
-    [ $g_family -eq 6 ] && usage 1
+    [ $g_family -eq 6 ] && fatal_error "$g_product does not support the ipcalc command"
 
     if [ $# -eq 2 ]; then
 	address=${2%/*}
@@ -3543,13 +3657,15 @@ ipcalc_command() {
     elif [ $# -eq 3 ]; then
 	address=$2
 	vlsm=$(ip_vlsm $3)
+    elif [ $# -eq 0 ]; then
+	missing_argument
     else
-	usage 1
+	too_many_arguments $4
     fi
 
     valid_address $address || fatal_error "Invalid IP address: $address"
-    [ -z "$vlsm" ] && usage 2
-    [ "x$address" = "x$vlsm" ] && usage 2
+    [ -z "$vlsm" ] && fatal_error "Missing VLSM"
+    [ "x$address" = "x$vlsm" ] && "Invalid VLSM"
     [ $vlsm -gt 32 ] && fatal_error "Invalid VLSM: /$vlsm"
 
     address=$address/$vlsm
@@ -3563,7 +3679,7 @@ ipcalc_command() {
 iprange_command() {
     local range
 
-    [ $g_family -eq 6 ] && usage 1
+    [ $g_family -eq 6 ] && fatal_error "$g_product does not support the iprange command"
 
     range=''
 
@@ -3581,15 +3697,19 @@ iprange_command() {
 	    ip_range $range
 	    ;;
 	*)
-	    usage 1
+	    fatal_error "Invalid ip range: $range"
 	    ;;
     esac
 }
 
 ipdecimal_command() {
-    [ $# -eq 2 ] || usage 1
+    if [ $# eq 1 ]; then
+	missing_argument
+    else
+	[ $# -eq 2 ] || too_many_arguments $3
+    fi
 
-    [ $g_family -eq 6 ] && usage 1
+    [ $g_family -eq 6 ] && fatal_error "$g_product does not support the iprange command"
 
     case $2 in
 	*.*.*.*)
@@ -3793,6 +3913,38 @@ get_config() {
 	g_pager="| $g_pager"
      fi
 
+    if [ -n "$DYNAMIC_BLACKLIST" ]; then
+	case $DYNAMIC_BLACKLIST in
+	    [Nn]o)
+		DYNAMIC_BLACKLIST='';
+		;;
+	    [Yy]es)
+	        ;;
+	    ipset|ipset::*|ipset-only|ipset-only::*|ipset,src-dst|ipset-only,src-dst::*)
+		g_blacklistipset=SW_DBL$g_family
+		;;
+	    ipset:[a-zA-Z]*)
+		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset:}
+		g_blacklistipset=${g_blacklistipset%%:*}
+		;;
+	    ipset,src-dst:[a-zA-Z]*)
+		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset,src-dst:}
+		g_blacklistipset=${g_blacklistipset%%:*}
+		;;
+	    ipset-only:[a-zA-Z]*)
+		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset-only:}
+		g_blacklistipset=${g_blacklistipset%%:*}
+		;;
+	    ipset-only,src-dst:[a-zA-Z]*)
+		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset-only,src-dst:}
+		g_blacklistipset=${g_blacklistipset%%:*}
+		;;
+	    *)
+		fatal_error "Invalid value ($DYNAMIC_BLACKLIST) for DYNAMIC_BLACKLIST"
+		;;
+	esac
+    fi
+
     lib=$(find_file lib.cli-user)
 
     [ -f $lib ] && . $lib
@@ -3819,7 +3971,7 @@ start_command() {
 	    rc=$?
 	else
 	    error_message "${VARDIR}/firewall is missing or is not executable"
-	    logger -p kern.err "ERROR:$g_product start failed"
+	    mylogger kern.err "ERROR:$g_product start failed"
 	    rc=6
 	fi
 
@@ -3865,7 +4017,7 @@ start_command() {
 			    option=${option%p}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -3881,7 +4033,7 @@ start_command() {
 	0)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $1
 	    ;;
     esac
 
@@ -3925,7 +4077,7 @@ restart_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -3941,7 +4093,7 @@ restart_command() {
 	0)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $1
 	    ;;
     esac
 
@@ -3952,7 +4104,7 @@ restart_command() {
 	rc=$?
     else
 	error_message "${VARDIR}/firewall is missing or is not executable"
-	logger -p kern.err "ERROR:$g_product $COMMAND failed"
+	mylogger kern.err "ERROR:$g_product $COMMAND failed"
 	rc=6
     fi
 
@@ -3983,6 +4135,7 @@ usage() # $1 = exit status
     echo "where <command> is one of:"
     echo "   add <interface>[:<host-list>] ... <zone>"
     echo "   allow <address> ..."
+    echo "   blacklist <address> [ <option> ... ]"
     ecko "   [ check | ck ] [ -e ] [ -r ] [ -p ] [ -r ] [ -T ] [ -i ] [ <directory> ]"
     echo "   clear"
     ecko "   [ compile | co ] [ -e ] [ -p ] [ -t ] [ -c ] [ -d ] [ -T ] [ -i ] [ <directory name> ] [ <path name> ]"
@@ -4134,6 +4287,7 @@ shorewall_cli() {
     g_loopback=
     g_compiled=
     g_pager=
+    g_blacklistipset=
 
     VERBOSE=
     VERBOSITY=1
@@ -4155,7 +4309,8 @@ shorewall_cli() {
 		while [ -n "$option" ]; do
 		    case $option in
 			c)
-			    [ $# -eq 1 -o -n "$g_lite" ] && usage 1
+			    [ $# -eq 1 ]     && missing_option_value -c
+			    [ -n "$g_lite" ] && fatal_error "$g_product does not support the -c option"
 
 			    if [ ! -d $2 ]; then
 				if [ -e $2 ]; then
@@ -4170,7 +4325,7 @@ shorewall_cli() {
 			    shift
 			    ;;
 			e*)
-			    [ -n "$g_lite" ] && usage 1
+			    [ -n "$g_lite" ] && fatal_error "$g_product does not support the -e option"
 			    g_export=Yes
 			    option=${option#e}
 			    ;;
@@ -4232,7 +4387,7 @@ shorewall_cli() {
 			    option=
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -4297,7 +4452,7 @@ shorewall_cli() {
 	    start_command $@
 	    ;;
 	stop|clear)
-	    [ $# -ne 1 ] && usage 1
+	    [ $# -ne 1 ] && too_many_arguments $2
 	    get_config
 	    [ -x $g_firewall ] || fatal_error "$g_product has never been started"
 	    [ -n "$g_nolock" ] || mutex_on
@@ -4325,6 +4480,13 @@ shorewall_cli() {
 		fatal_error "$g_product is not running"
 	    fi
 	    ;;
+	blacklist)
+	    get_config Yes
+	    shift
+	    [ -n "$g_nolock" ] || mutex_on
+	    blacklist_command $@
+	    [ -n "$g_nolock" ] || mutex_off
+	    ;;
 	run)
 	    [ $# -gt 1 ] || fatal_error "Missing function name"
 	    get_config Yes
@@ -4347,7 +4509,7 @@ shorewall_cli() {
     	    dump_command $@
 	    ;;
 	hits)
-	    [ $g_family -eq 6 ] && usage 1
+	    [ $g_family -eq 6 ] && fatal_error "$g_product does not support the hits command"
 	    get_config Yes No Yes
 	    [ -n "$g_debugging" ] && set -x
 	    shift
@@ -4365,19 +4527,19 @@ shorewall_cli() {
 	drop)
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
-	    [ $# -eq 1 ] && usage 1
+	    [ $# -eq 1 ] && missing_argument
 	    drop_command $@
 	    ;;
 	logdrop)
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
-	    [ $# -eq 1 ] && usage 1
+	    [ $# -eq 1 ] && missing_argument
 	    logdrop_command $@
 	    ;;
 	reject|logreject)
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
-	    [ $# -eq 1 ] && usage 1
+	    [ $# -eq 1 ] && missing_argument
 	    reject_command $@
 	    ;;
 	open|close)
@@ -4442,6 +4604,11 @@ shorewall_cli() {
 		    # It's a shell function -- call it
 		    #
 		    $@
+		elif type $1 2> /dev/null | fgrep -q 'is a shell function'; then
+		    #
+		    # It's a shell function -- call it
+		    #
+		    $@
 		else
 		    #
 		    # It isn't a function visible to this script -- try
@@ -4450,7 +4617,7 @@ shorewall_cli() {
 		    run_it $g_firewall $g_debugging call $@
 		fi
 	    else
-		usage 1
+		missing_argument
 	    fi
 	    ;;
 	help)
@@ -4468,7 +4635,7 @@ shorewall_cli() {
 	    noiptrace_command $@
 	    ;;
 	savesets)
-	    [ $# -eq 1 ] || usage 1
+	    [ $# -eq 1 ] || too_many_arguments $2
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    savesets1
@@ -4477,7 +4644,7 @@ shorewall_cli() {
 	    if [ -z "$g_lite" ]; then
 		compiler_command $@
 	    else
-		usage 1
+		fatal_error "Invalid command: $COMMAND"
 	    fi
 	    ;;
     esac

Shorewall-core/lib.common

@@ -25,6 +25,22 @@
 # scripts rather than loaded at run-time.
 #
 #########################################################################################
+#
+# Wrapper around logger that sets the tag according to $SW_LOGGERTAG
+#
+mylogger() {
+    local level
+
+    level=$1
+    shift
+
+    if [ -n "$SW_LOGGERTAG" ]; then
+	logger -p $level -t "$SW_LOGGERTAG" $*
+    else
+	logger -p $level $*
+    fi
+}
+
 #
 # Issue a message and stop
 #
@@ -33,24 +49,24 @@ startup_error() # $* = Error Message
     echo "   ERROR: $@: Firewall state not changed" >&2
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%b %d %T') "
+        timestamp="$(date +'%b %e %T') "
         echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
     fi
 
     case $COMMAND in
         start)
-	    logger -p kern.err "ERROR:$g_product start failed:Firewall state not changed"
+	    mylogger kern.err "ERROR:$g_product start failed:Firewall state not changed"
 	    ;;
 	restart)
-	    logger -p kern.err "ERROR:$g_product restart failed:Firewall state not changed"
+	    mylogger kern.err "ERROR:$g_product restart failed:Firewall state not changed"
 	    ;;
 	restore)
-	    logger -p kern.err "ERROR:$g_product restore failed:Firewall state not changed"
+	    mylogger kern.err "ERROR:$g_product restore failed:Firewall state not changed"
 	    ;;
     esac
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%b %d %T') "
+        timestamp="$(date +'%b %e %T') "
 
 	case $COMMAND in
 	    start)
@@ -696,9 +712,9 @@ find_file()
 set_state () # $1 = state
 {
     if [ $# -gt 1 ]; then
-	echo "$1 ($(date)) from $2" > ${VARDIR}/state
+	echo "$1 $(date) from $2" > ${VARDIR}/state
     else
-	echo "$1 ($(date))" > ${VARDIR}/state
+	echo "$1 $(date)" > ${VARDIR}/state
     fi
 }
 
@@ -760,7 +776,7 @@ mutex_on()
 		error_message "WARNING: Stale lockfile ${lockf} removed"
 	    elif [ $lockpid -eq $$ ]; then
                 return 0
-	    elif ! qt ps p ${lockpid}; then
+	    elif ! ps | grep -v grep | qt grep ${lockpid}; then
 		rm -f ${lockf}
 		error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
 	    fi
@@ -772,10 +788,8 @@ mutex_on()
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
 	elif qt mywhich lock; then
-            lock -${MUTEX_TIMEOUT} -r1 ${lockf}
-            chmod u+w ${lockf}
-            echo $$ > ${lockf}
-            chmod u-w ${lockf}
+            lock ${lockf}
+            chmod u=r ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1
@@ -797,6 +811,7 @@ mutex_on()
 #
 mutex_off()
 {
+    [ -f ${CONFDIR}/rc.common ] && lock -u ${LOCKFILE:=${VARDIR}/lock}
     rm -f ${LOCKFILE:=${VARDIR}/lock}
 }
 

Shorewall-core/shorewallrc.suse

@@ -7,15 +7,15 @@ PREFIX=/usr                                           #Top-level directory for s
 CONFDIR=/etc                                          #Directory where subsystem configurations are installed
 SHAREDIR=${PREFIX}/share                              #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/lib                              #Directory for executable scripts.
-PERLLIBDIR=${PREFIX}/lib/perl5/vendor_perl/5.14.2     #Directory to install Shorewall Perl module directory
+PERLLIBDIR=${PREFIX}/lib/perl5/site-perl              #Directory to install Shorewall Perl module directory
 SBINDIR=/usr/sbin                                     #Directory where system administration programs are installed
 MANDIR=${SHAREDIR}/man/                               #Directory where manpages are installed.
 INITDIR=/etc/init.d                                   #Directory where SysV init scripts are installed.
-INITFILE=$PRODUCT                                     #Name of the product's SysV init script
+INITFILE=                                             #Name of the product's SysV init script
 INITSOURCE=init.suse.sh                               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                                            #If non-zero, annotated configuration files are installed
-SERVICEDIR=                                           #Directory where .service files are installed (systems running systemd only)
-SERVICEFILE=                      		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SERVICEDIR=/usr/lib/systemd/system                    #Directory where .service files are installed (systems running systemd only)
+SERVICEFILE=$PRODUCT.service          		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=sysconfig                                 #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=/etc/sysconfig/                            #Directory where SysV init parameter files are installed
 SPARSE=                                               #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR

Shorewall-core/uninstall.sh

@@ -117,6 +117,7 @@ fi
 echo "Uninstalling Shorewall Core $VERSION"
 
 rm -rf ${SHAREDIR}/shorewall
+rm -f ~/.shorewallrc
 
 echo "Shorewall Core Uninstalled"
 

Shorewall-init/install.sh

@@ -412,7 +412,7 @@ if [ $HOST = debian ]; then
 
     if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
-	    mkdir ${DESTDIR}${ETC}/default
+	    mkdir -p ${DESTDIR}${ETC}/default
 	fi
 
 	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
@@ -572,9 +572,9 @@ if [ -z "$DESTDIR" ]; then
 		    cant_autostart
 		fi
 	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
-		/etc/init.d/shorewall-inir enable
+		/etc/init.d/$PRODUCT enable
 		if /etc/init.d/shorewall-init enabled; then
-		    echo "Shorrewall Init will start automatically at boot"
+		    echo "$Product will start automatically at boot"
 		else
 		    cant_autostart
 		fi
@@ -585,7 +585,7 @@ if [ -z "$DESTDIR" ]; then
     fi
 else
     if [ $configure -eq 1 -a -n "$first_install" ]; then
-	if [ $HOST = debian ]; then
+	if [ $HOST = debian -a -z "$SERVICEDIR" ]; then
 	    if [ -n "${DESTDIR}" ]; then
 		mkdir -p ${DESTDIR}/etc/rcS.d
 	    fi

Shorewall-lite/install.sh

@@ -495,7 +495,7 @@ done
 # Install the Man Pages
 #
 
-if [ -d manpages ]; then
+if [ -d manpages -a -n "$MANDIR" ]; then
     cd manpages
 
     mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
@@ -550,7 +550,7 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
     fi
 
     install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
-    echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+    echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ ${SHAREDIR} != /usr/share ]; then

Shorewall-lite/manpages/shorewall-lite.xml

@@ -47,6 +47,19 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>blacklist</option></arg>
+
+      <arg choice="plain"><replaceable>address</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -689,7 +702,28 @@
           blacklisted by a <emphasis role="bold">drop</emphasis>, <emphasis
           role="bold">logdrop</emphasis>, <emphasis
           role="bold">reject</emphasis>, or <emphasis
-          role="bold">logreject</emphasis> command.</para>
+          role="bold">logreject</emphasis> command. Beginning with Shorewall
+          5.0.10, this command can also re-enable addresses blacklisted using
+          the <command>blacklist</command> command.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">blacklist</emphasis>
+        <replaceable>address</replaceable> [ <replaceable>option</replaceable>
+        ... ]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8 and requires
+          DYNAMIC_BLACKLIST=ipset.. in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).
+          Causes packets from the given host or network
+          <replaceable>address</replaceable> to be dropped, based on the
+          setting of BLACKLIST in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). The
+          <replaceable>address</replaceable> along with any
+          <replaceable>option</replaceable>s are passed to the <command>ipset
+          add</command> command.</para>
         </listitem>
       </varlistentry>
 
@@ -1553,6 +1587,34 @@
     started.</para>
   </refsect1>
 
+  <refsect1>
+    <title>ENVIRONMENT</title>
+
+    <para>Two environmental variables are recognized by Shorewall-lite:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term>SHOREWALL_INIT_SCRIPT</term>
+
+        <listitem>
+          <para>When set to 1, causes Std out to be redirected to the file
+          specified in the STARTUP_LOG option in <ulink
+          url="shorewall.conf.html">shorewall.conf(5)</ulink>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>SW_LOGGERTAG</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8. When set to a non-empty value, that
+          value is passed to the logger utility in its -t (--tag)
+          option.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
   <refsect1>
     <title>FILES</title>
 

Shorewall/Macros/macro.RedisCluster

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.RedisCluster
+#
+# This macro handles Redis Cluster traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	16379

Shorewall/Macros/macro.RedisSentinel

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.RedisSentinel
+#
+# This macro handles Redis Sentinel traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	26379

Shorewall/Perl/Shorewall/ARP.pm

@@ -244,7 +244,7 @@ sub create_arptables_load( $ ) {
 
     emit "exec 3>\${VARDIR}/.arptables-input";
 
-    my $date = localtime;
+    my $date = compiletime;
 
     unless ( $test ) {
 	emit_unindented '#';
@@ -294,7 +294,7 @@ sub create_arptables_load( $ ) {
 #
 sub preview_arptables_load() {
 
-    my $date = localtime;
+    my $date = compiletime;
 
     print "#\n# Generated by Shorewall $globals{VERSION} - $date\n#\n";
 

Shorewall/Perl/Shorewall/Chains.pm

@@ -279,6 +279,7 @@ our %EXPORT_TAGS = (
 				       save_docker_rules
 				       load_ipsets
 				       create_save_ipsets
+				       create_load_ipsets
 				       validate_nfobject
 				       create_nfobjects
 				       create_netfilter_load
@@ -286,6 +287,7 @@ our %EXPORT_TAGS = (
 				       create_chainlist_reload
 				       create_stop_load
 				       initialize_switches
+				       terminating
 				       %targets
 				       %builtin_target
 				       %dscpmap
@@ -808,14 +810,13 @@ sub initialize( $$$ ) {
 		     NETMAP       => 1,
 		     NFQUEUE      => 1,
 		     NOTRACK      => 1,
-		     REDIRECT     => 1,
 		     RAWDNAT      => 1,
+		     REDIRECT     => 1,
 		     RAWSNAT      => 1,
 		     REJECT       => 1,
 		     SAME         => 1,
 		     SNAT         => 1,
 		     TPROXY       => 1,
-		     reject       => 1,
 		   );
     #
     # The chain table is initialized via a call to initialize_chain_table() after the configuration and capabilities have been determined.
@@ -842,6 +843,24 @@ sub make_terminating( $ ) {
     $terminating{$_[0]} = 1;
 }
 
+#
+# Determine if a chain is terminating
+#
+sub terminating( $ ) {
+    my ( $chainref ) = @_;
+
+    return $chainref->{complete} && ! ( $chainref->{optflags} & RETURNS );
+}
+
+sub is_terminating( $$ ) {
+    my ( $table, $target ) = @_;
+
+    if ( my $chainref = $chain_table{$table}{$target} ) {
+	terminating( $chainref );
+    } else {
+	$terminating{$target};
+    }
+}
 #
 # Transform the passed iptables rule into an internal-form hash reference.
 # Most of the compiler has been converted to use the new form natively.
@@ -1309,6 +1328,8 @@ sub push_rule( $$ ) {
     my $complete = 0;
     my $ruleref  = transform_rule( $_[1], $complete );
 
+    fatal_error "Chain $chainref->{name} jumps to itself" if ( $ruleref->{target} || '' ) eq $chainref->{name};
+
     set_irule_comment( $chainref, $ruleref );
 
     $ruleref->{mode}    = CMD_MODE if $ruleref->{cmdlevel} = $chainref->{cmdlevel};
@@ -1539,6 +1560,7 @@ sub create_irule( $$$;@ ) {
 	$ruleref->{jump}       = $jump;
 	$ruleref->{target}     = $target;
 	$chainref->{optflags} |= RETURNS_DONT_MOVE if $target eq 'RETURN';
+	$chainref->{complete} ||= ( ! @matches && ( $jump eq 'g' || is_terminating( $chainref->{table}, $target ) ) );
 	$ruleref->{targetopts} = $targetopts if $targetopts;
     } else {
 	$ruleref->{target} = '';
@@ -2485,7 +2507,7 @@ sub add_ijump_internal( $$$$$;@ ) {
     }
 
     if ( $ruleref->{simple} ) {
-	$fromref->{complete} = 1 if $jump eq 'g' || $terminating{$to};
+	$fromref->{complete} = 1 if $jump eq 'g' || ( $toref ? terminating( $toref ) : $terminating{$to} );
     }
 
     $ruleref->{origin} = $origin if $origin;
@@ -5198,6 +5220,8 @@ sub do_user( $ ) {
 
     if ( supplied $2 ) {
 	$user  = $2;
+	$user =~ s/:$//;
+
 	if ( $user =~ /^(\d+)(-(\d+))?$/ ) {
 	    if ( supplied $2 ) {
 		fatal_error "Invalid User Range ($user)" unless $3 >= $1;
@@ -7744,7 +7768,10 @@ sub expand_rule( $$$$$$$$$$$$;$ )
 			# No logging or user-specified logging -- add the target rule with matches to the rule chain
 			#
 			if ( $targetref ) {
-			    add_expanded_jump( $chainref, $targetref , 0, $prerule . $matches );
+			    add_expanded_jump( $chainref ,
+					       $targetref ,
+					       terminating( $targetref ) ,
+					       $prerule . $matches );
 			} else {
 			    add_rule( $chainref, $prerule . $matches . $jump , 1 );
 			}
@@ -8224,14 +8251,22 @@ EOF
     emit( '' ), save_docker_rules( $tool ), emit( '' ) if $config{DOCKER};
 }
 
-sub ensure_ipset( $ ) {
-    my $set = shift;
+sub ensure_ipsets( @ ) {
+    my $set;
+
+    if ( @_ > 1 ) {
+	push_indent;
+	emit( "for set in @_; do" );
+	$set = '$set';
+    } else {
+	$set = $_[0];
+    }
 
     if ( $family == F_IPV4 ) {
 	if ( have_capability 'IPSET_V5' ) {
 	    emit ( qq(    if ! qt \$IPSET -L $set -n; then) ,
-		   qq(        error_message "WARNING: ipset $set does not exist; creating it as an hash:ip set") ,
-		   qq(        \$IPSET -N $set hash:ip family inet) ,
+		   qq(        error_message "WARNING: ipset $set does not exist; creating it as an hash:net set") ,
+		   qq(        \$IPSET -N $set hash:net family inet timeout 0 counters) ,
 		   qq(    fi) );
 	} else {
 	    emit ( qq(    if ! qt \$IPSET -L $set -n; then) ,
@@ -8241,10 +8276,15 @@ sub ensure_ipset( $ ) {
 	}
     } else {
 	emit ( qq(    if ! qt \$IPSET -L $set -n; then) ,
-	       qq(        error_message "WARNING: ipset $set does not exist; creating it as an hash:ip set") ,
-	       qq(        \$IPSET -N $set hash:ip family inet6) ,
+	       qq(        error_message "WARNING: ipset $set does not exist; creating it as an hash:net set") ,
+	       qq(        \$IPSET -N $set hash:net family inet6 timeout 0 counters) ,
 	       qq(    fi) );
     }
+
+    if ( @_ > 1 ) {
+	emit 'done';
+	pop_indent;
+    }
 }
 
 #
@@ -8253,22 +8293,26 @@ sub ensure_ipset( $ ) {
 sub create_save_ipsets() {
     my @ipsets = all_ipsets;
 
-    emit( "#\n#Save the ipsets specified by the SAVE_IPSETS setting and by dynamic zones\n#",
+    emit( "#\n#Save the ipsets specified by the SAVE_IPSETS setting and by dynamic zones and blacklisting\n#",
 	  'save_ipsets() {' );
 
     if ( @ipsets || @{$globals{SAVED_IPSETS}} || ( $config{SAVE_IPSETS} && have_ipset_rules ) ) {
 	emit( '    local file' ,
+	      '    local set' ,
 	      '',
 	      '    file=${1:-${VARDIR}/save.ipsets}'
 	    );
 
 	if ( @ipsets ) {
 	    emit '';
-	    ensure_ipset( $_ ) for @ipsets;
+	    ensure_ipsets( @ipsets );
 	}
 
 	if ( $config{SAVE_IPSETS} ) {
 	    if ( $family == F_IPV6 || $config{SAVE_IPSETS} eq 'ipv4' ) {
+		#
+		# Requires V5 or later
+		#
 		my $select = $family == F_IPV4 ? '^create.*family inet ' : 'create.*family inet6 ';
 
 		emit( '' ,
@@ -8277,11 +8321,6 @@ sub create_save_ipsets() {
 		      '    local set' ,
 		    );
 
-		if ( @ipsets ) {
-		    emit '';
-		    emit( "    \$IPSET -S $_ >> \$file" ) for @ipsets;
-		}
-
 		emit( '',
 		      "    for set in \$(\$IPSET save | grep '$select' | cut -d' ' -f2); do" ,
 		      "        \$IPSET save \$set >> \$file" ,
@@ -8289,6 +8328,9 @@ sub create_save_ipsets() {
 		      '',
 		    );
 	    } else {
+		#
+		# Saving all ipsets (IPv4 and IPv6, if any )
+		# 
 		emit ( 
 		       '',
 		       '    if eval $IPSET -S > ${VARDIR}/ipsets.tmp; then' ,
@@ -8297,28 +8339,48 @@ sub create_save_ipsets() {
 	    }
 
 	    emit( "    return 0",
-		  '',
 		  "}\n" );
 	} elsif ( @ipsets || $globals{SAVED_IPSETS} ) {
+	    #
+	    # Requires V5 or later
+	    #
+	    my %ipsets;
+	    #
+	    # Requires V
+	    #
+	    $ipsets{$_} = 1 for ( @ipsets, @{$globals{SAVED_IPSETS}} );
+
+	    my @sets = sort keys %ipsets;
+
 	    emit( '' ,
+		  '    rm -f $file' ,
+		  '    touch $file' ,
 		  '    rm -f ${VARDIR}/ipsets.tmp' ,
 		  '    touch ${VARDIR}/ipsets.tmp' ,
 		);
 
-	    if ( @ipsets ) {
-		emit '';
-		emit( "    \$IPSET -S $_ >> \${VARDIR}/ipsets.tmp" ) for @ipsets;
+	    if ( @sets > 1 ) {
+		emit( '' ,
+		      "    for set in @sets; do" , 
+		      '        if qt $IPSET list $set; then' ,
+		      '            $IPSET save $set >> ${VARDIR}/ipsets.tmp' ,
+		      '        else' ,
+		      '            error_message "ipset $set not saved (not found)"' ,
+		      '        fi' ,
+		      '    done' );
+	    } else {
+		my $set = $sets[0];
+
+		emit( '' ,
+		      "    if qt \$IPSET list $set; then" ,
+		      "        \$IPSET save $set >> \${VARDIR}/ipsets.tmp" ,
+		      '    else' ,
+		      "        error_message 'ipset $set not saved (not found)'" ,
+		      '    fi' );
 	    }
 
 	    emit( '' ,
-		  "    if qt \$IPSET list $_; then" ,
-		  "        \$IPSET save $_ >> \${VARDIR}/ipsets.tmp" ,
-		  '    else' ,
-		  "        error_message 'ipset $_ not saved (not found)'" ,
-		  "    fi\n" ) for @{$globals{SAVED_IPSETS}};
-
-	    emit( '' ,
-		  "    grep -qE -- \"(-N|^create )\" \${VARDIR}/ipsets.tmp && cat \${VARDIR}/ipsets.tmp >> \$file\n" ,
+		  "    grep -q -- \"^create \" \${VARDIR}/ipsets.tmp && mv -f \${VARDIR}/ipsets.tmp \$file\n" ,
 		  '' ,
 		  '    return 0',
 		  '' ,
@@ -8334,13 +8396,58 @@ sub create_save_ipsets() {
     }
 }
 
-sub load_ipsets() {
+sub create_load_ipsets() {
 
-    my @ipsets = all_ipsets;
+    my @ipsets = all_ipsets; #Dynamic Zone IPSETS
 
-    if ( @ipsets || @{$globals{SAVED_IPSETS}} || ( $config{SAVE_IPSETS} && have_ipset_rules ) ) {
-	emit ( '', );
-	emit ( '',
+    my $setting = $config{SAVE_IPSETS};
+
+    my $havesets =  @ipsets || @{$globals{SAVED_IPSETS}} || ( $setting && have_ipset_rules );
+
+    #
+    # Generate a function that flushes and destroys sets prior to restoring them
+    #
+    if ( $havesets ) {
+	my $select = $family == F_IPV4 ? '^create.*family inet ' : 'create.*family inet6 ';
+
+	emit ( "#\n#Flush and Destroy the sets that we will subsequently attempt to restore\n#",
+	       'zap_ipsets() {',
+	       '    local set',
+	       '' );
+
+	if ( $family == F_IPV6 || $setting !~ /yes/i ) {
+	    #
+	    # Requires V5 or later
+	    #
+	    emit( '' ,
+		  "    for set in \$(\$IPSET save | grep '$select' | cut -d' ' -f2); do" ,
+		  '        $IPSET flush $set' ,
+		  '        $IPSET destroy $set' ,
+		  "    done" ,
+		  '',
+		);
+	} else {
+	    #
+	    # Restoring all ipsets (IPv4 and IPv6, if any)
+	    #
+	    emit ( '    if [ -f ${VARDIR}/ipsets.save ]; then' ,
+		   '        $IPSET -F' ,
+		   '        $IPSET -X' ,
+		   '    fi' );
+	};
+
+	emit( '}' );
+    }
+    #
+    # Now generate load_ipsets()
+    
+    emit ( "#\n#Flush and Destroy the sets then load fresh copy from a saved ipset file\n#",
+	   'load_ipsets() {' );
+
+    push_indent;
+
+    if ( $havesets ) {
+	emit(  '',
 	       'case $IPSET in',
 	       '    */*)',
 	       '        [ -x "$IPSET" ] || startup_error "IPSET=$IPSET does not exist or is not executable"',
@@ -8351,86 +8458,56 @@ sub load_ipsets() {
 	       '        ;;',
 	       'esac' ,
 	       '' ,
-	       'if [ "$COMMAND" = start ]; then' );
+	       'if [ "$COMMAND" = start ]; then' );         ##################### Start Command ##################
 
-	if ( $config{SAVE_IPSETS} ) {
-	    emit ( '    if [ -f ${VARDIR}/ipsets.save ]; then' ,
-		   '        $IPSET -F' ,
-		   '        $IPSET -X' ,
-		   '        $IPSET -R < ${VARDIR}/ipsets.save' ,
-		   '    fi' );
-
-	    if ( @ipsets ) {
-		emit ( '' );
-		ensure_ipset( $_ ) for @ipsets;
-		emit ( '' );
-
-		emit ( '    if [ -f ${VARDIR}/ipsets.save ]; then' ,
-		       '        $IPSET flush' ,
-		       '        $IPSET destroy' ,
-		       '        $IPSET restore < ${VARDIR}/ipsets.save' ,
-		       "    fi\n" ) for @{$globals{SAVED_IPSETS}};
-	    }
-	} else {
-	    ensure_ipset( $_ ) for @ipsets;
-
-	    if ( @{$globals{SAVED_IPSETS}} ) {
-		emit ( '' );
-
-		emit ( '    if [ -f ${VARDIR}/ipsets.save ]; then' ,
-		       '        $IPSET flush' ,
-		       '        $IPSET destroy' ,
-		       '        $IPSET restore < ${VARDIR}/ipsets.save' ,
-		       "    fi\n" ) for @{$globals{SAVED_IPSETS}};
-	    }
+	if ( $config{SAVE_IPSETS} || @{$globals{SAVED_IPSETS}} ) {
+	    emit( '    if [ -f ${VARDIR}/ipsets.save ]; then',
+		  '        zap_ipsets',
+		  '        $IPSET -R < ${VARDIR}/ipsets.save',
+		  '    fi' );
 	}
 
-	emit ( 'elif [ "$COMMAND" = restore -a -z "$g_recovering" ]; then' );
+	if ( @ipsets ) {
+	    emit ( '' );
+	    ensure_ipsets( @ipsets );
+	}
 
-	if ( $config{SAVE_IPSETS} ) {
+	emit ( 'elif [ "$COMMAND" = restore -a -z "$g_recovering" ]; then' ); ### Restore Command #################
+
+	if ( $config{SAVE_IPSETS} || @{$globals{SAVED_IPSETS}} ) {
 	    emit( '    if [ -f $(my_pathname)-ipsets ]; then' ,
 		  '        if chain_exists shorewall; then' ,
 		  '            startup_error "Cannot restore $(my_pathname)-ipsets with Shorewall running"' ,
 		  '        else' ,
-		  '            $IPSET -F' ,
-		  '            $IPSET -X' ,
+		  '            zap_ipsets' ,
 		  '            $IPSET -R < $(my_pathname)-ipsets' ,
 		  '        fi' ,
 		  '    fi' ,
 		);
-
-	    if ( @ipsets ) {
-		emit ( '' );
-		ensure_ipset( $_ ) for @ipsets;
-		emit ( '' );
-	    }
-	} else {
-	    ensure_ipset( $_ ) for @ipsets;
-
-	    emit ( '    if [ -f ${VARDIR}/ipsets.save ]; then' ,
-		   '        $IPSET flush' ,
-		   '        $IPSET destroy' ,
-		   '        $IPSET restore < ${VARDIR}/ipsets.save' ,
-		   "    fi\n" ) for @{$globals{SAVED_IPSETS}};
 	}
 
 	if ( @ipsets ) {
-	    emit ( 'elif [ "$COMMAND" = reload ]; then' );
-	    ensure_ipset( $_ ) for @ipsets;
-	}
+	    emit ( '' );
+	    ensure_ipsets( @ipsets );
 
-	emit( 'elif [ "$COMMAND" = stop ]; then' ,
-	      '   save_ipsets'
-	    );
+	    emit ( 'elif [ "$COMMAND" = reload ]; then' );   ################### Reload Command ####################
+	    ensure_ipsets( @ipsets );
 
-	if ( @ipsets ) {
-	    emit( 'elif [ "$COMMAND" = refresh ]; then' );
-	    ensure_ipset( $_ ) for @ipsets;
+	    emit( 'elif [ "$COMMAND" = refresh ]; then' );   ################### Refresh Command ###################
+	    emit ( '' );
+	    ensure_ipsets( @ipsets );
+	    emit ( '' );
 	};
 
 	emit ( 'fi' ,
 	       '' );
+    } else {
+	emit 'true';
     }
+
+    pop_indent;
+
+    emit '}';	    
 }
 
 #
@@ -8500,7 +8577,7 @@ sub create_netfilter_load( $ ) {
 
     enter_cat_mode;
 
-    my $date = localtime;
+    my $date = compiletime;
 
     unless ( $test ) {
 	emit_unindented '#';
@@ -8608,7 +8685,7 @@ sub preview_netfilter_load() {
 
     enter_cat_mode1;
 
-    my $date = localtime;
+    my $date = compiletime;
 
     print "#\n# Generated by Shorewall $globals{VERSION} - $date\n#\n";
 
@@ -8844,7 +8921,7 @@ sub create_stop_load( $ ) {
     enter_cat_mode;
 
     unless ( $test ) {
-	my $date = localtime;
+	my $date = compiletime;
 	emit_unindented '#';
 	emit_unindented "# Generated by Shorewall $globals{VERSION} - $date";
 	emit_unindented '#';

Shorewall/Perl/Shorewall/Compiler.pm

@@ -76,7 +76,7 @@ sub initialize_package_globals( $$$ ) {
 #
 # First stage of script generation.
 #
-#    Copy lib.core and lib.common to the generated script.
+#    Copy lib.runtime and lib.common to the generated script.
 #    Generate the various user-exit jacket functions.
 #
 #    Note: This function is not called when $command eq 'check'. So it must have no side effects other
@@ -90,12 +90,12 @@ sub generate_script_1( $ ) {
 	if ( $test ) {
 	    emit "#!$config{SHOREWALL_SHELL}\n#\n# Compiled firewall script generated by Shorewall-perl\n#";
 	} else {
-	    my $date = localtime;
+	    my $date = compiletime;
 
 	    emit "#!$config{SHOREWALL_SHELL}\n#\n# Compiled firewall script generated by Shorewall $globals{VERSION} - $date\n#";
 
-	    copy  $globals{SHAREDIRPL} . '/lib.core', 0;
-	    copy2 $globals{SHAREDIRPL} . '/lib.common', $debug;
+	    copy  $globals{SHAREDIRPL} . '/lib.runtime', 0;
+	    copy2 $globals{SHAREDIRPL} . '/lib.common' , $debug;
 	}
 
     }
@@ -368,6 +368,7 @@ sub generate_script_3($) {
     create_arptables_load( $test ) if $have_arptables;
     create_chainlist_reload( $_[0] );
     create_save_ipsets;
+    create_load_ipsets;
 
     emit "#\n# Start/Reload the Firewall\n#";
 
@@ -406,7 +407,9 @@ sub generate_script_3($) {
 	   'fi',
 	   '' );
 
-    load_ipsets;
+    emit( 'load_ipsets' ,
+	  '' );
+
     create_nfobjects;
     verify_address_variables;
     save_dynamic_chains;
@@ -573,16 +576,16 @@ date > ${VARDIR}/restarted
 
 case $COMMAND in
     start)
-        logger -p kern.info "$g_product started"
+        mylogger kern.info "$g_product started"
         ;;
-    reloaded)
-        logger -p kern.info "$g_product reloaded"
+    reload)
+        mylogger kern.info "$g_product reloaded"
         ;;
     refresh)
-        logger -p kern.info "$g_product refreshed"
+        mylogger kern.info "$g_product refreshed"
         ;;
     restore)
-        logger -p kern.info "$g_product restored"
+        mylogger kern.info "$g_product restored"
         ;;
 esac
 EOF
@@ -593,6 +596,21 @@ EOF
 
 }
 
+#
+# Generate info_command()
+#
+sub compile_info_command() {
+    my $date = compiletime;
+
+    emit( "\n",
+	  "#",
+	  "# Echo the date and time when this script was compiled along with the Shorewall version",
+	  "#",
+	  "info_command() {" ,
+	  qq(    echo "compiled $date by Shorewall version $globals{VERSION}") ,
+	  "}\n" );
+}   
+
 #
 #  The Compiler.
 #
@@ -867,10 +885,6 @@ sub compiler {
     #
     complete_policy_chains;
     #
-    # Reject Action
-    #
-    process_reject_action if $config{REJECT_ACTION};
-    #
     # Accounting.
     #
     setup_accounting if $config{ACCOUNTING};
@@ -923,6 +937,10 @@ sub compiler {
 	#
 	compile_updown;
 	#
+	# Echo the compilation time and date
+	#
+	compile_info_command unless $test;
+	#
 	# Copy the footer to the script
 	#
 	copy $globals{SHAREDIRPL} . 'prog.footer' unless $test;

Shorewall/Perl/Shorewall/Config.pm

@@ -84,6 +84,8 @@ our @EXPORT = qw(
 		 require_capability
 		 report_used_capabilities
 		 kernel_version
+
+                 compiletime
                 );
 
 our @EXPORT_OK = qw( $shorewall_dir initialize shorewall);
@@ -161,6 +163,9 @@ our %EXPORT_TAGS = ( internal => [ qw( create_temp_script
                                        set_section_function
                                        clear_section_function
                                        directive_callback
+		                       add_ipset
+		                       all_ipsets
+                                       transfer_permissions
 
 				       $product
 				       $Product
@@ -344,7 +349,7 @@ our %capdesc = ( NAT_ENABLED     => 'NAT',
                                  => 'Ipset Match nomatch',
 		 IPSET_MATCH_COUNTERS
                                  => 'Ipset Match counters',
-		 IPSET_V5        => 'Version 5 ipsets',
+		 IPSET_V5        => 'Version 5 or later ipset',
 		 CONNMARK        => 'CONNMARK Target',
 		 XCONNMARK       => 'Extended CONNMARK Target',
 		 CONNMARK_MATCH  => 'Connmark Match',
@@ -673,11 +678,14 @@ our $section_function; #Function Reference for handling ?section
 
 our $evals = 0; # Number of times eval() called out of evaluate_expression() or embedded_perl().
 
+our %ipsets; # All required IPsets
 #
 # Files located via find_file()
 #
 our %filecache;
 
+our $compiletime;
+
 sub process_shorewallrc($$);
 sub add_variables( \% );
 #
@@ -734,7 +742,7 @@ sub initialize( $;$$) {
 		    TC_SCRIPT               => '',
 		    EXPORT                  => 0,
 		    KLUDGEFREE              => '',
-		    VERSION                 => "5.0.1",
+		    VERSION                 => "5.0.9-Beta2",
 		    CAPVERSION              => 50004 ,
 		    BLACKLIST_LOG_TAG       => '',
 		    RELATED_LOG_TAG         => '',
@@ -886,6 +894,7 @@ sub initialize( $;$$) {
 	  DOCKER => undef ,
 	  PAGER => undef ,
 	  MINIUPNPD => undef ,
+	  VERBOSE_MESSAGES => undef ,
 	  #
 	  # Packet Disposition
 	  #
@@ -1073,6 +1082,7 @@ sub initialize( $;$$) {
     %actparams = ( 0 => 0, loglevel => '', logtag => '', chain => '', disposition => '', caller => ''  );
     $parmsmodified = 0;
     $usedcaller    = 0;
+    %ipsets = ();
 
     %helpers_enabled = (
 			amanda       => 1,
@@ -1167,10 +1177,28 @@ sub initialize( $;$$) {
     %shorewallrc1 = %shorewallrc unless $shorewallrc1;
 
     add_variables %shorewallrc1;
+
+    $compiletime = `date`;
+
+    chomp $compiletime;
+
+    $compiletime =~ s/ +/ /g;
 }
 
 my @abbr = qw( Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec );
 
+sub add_ipset( $ ) {
+    $ipsets{$_[0]} = 1;
+}
+
+sub all_ipsets() {
+    sort keys %ipsets;
+}
+
+sub compiletime() {
+    $compiletime;
+}
+
 #
 # Create 'currentlineinfo'
 #
@@ -1244,6 +1272,34 @@ sub shortlineinfo( $ ) {
 
 sub handle_first_entry();
 
+#
+# Issue a Information Message
+#
+sub info_message
+{
+    my $currentlineinfo = currentlineinfo;
+    our @localtime;
+
+    handle_first_entry if $first_entry;
+
+    $| = 1; #Reset output buffering (flush any partially filled buffers).
+
+    if ( $log ) {
+	@localtime = localtime;
+	printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
+    }
+
+    if ( $confess ) {
+	print STDERR longmess( "   INFO: @_$currentlineinfo" );
+	print $log   longmess( "   INFO: @_$currentlineinfo\n" ) if $log;
+    } else {
+	print STDERR "   INFO: @_$currentlineinfo\n";
+	print $log   "   INFO: @_$currentlineinfo\n" if $log;
+    }
+
+    $| = 0; #Re-allow output buffering
+}
+
 #
 # Issue a Warning Message
 #
@@ -1673,7 +1729,7 @@ sub progress_message {
 
 	    @localtime = localtime unless $havelocaltime;
 
-	    printf $log '%s %2d %2d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
+	    printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
 	    print $log "${leading}${line}\n";
 	}
     }
@@ -1692,7 +1748,7 @@ sub progress_message_nocompress {
 
 	@localtime = localtime unless $havelocaltime;
 
-	printf $log '%s %2d %2d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
+	printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
 	print $log "@_\n";
     }
 }
@@ -1713,7 +1769,7 @@ sub progress_message2 {
 
 	@localtime = localtime unless $havelocaltime;
 
-	printf $log '%s %2d %2d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
+	printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
 	print $log "@_\n";
     }
 }
@@ -1734,7 +1790,7 @@ sub progress_message3 {
 
 	@localtime = localtime unless $havelocaltime;
 
-	printf $log '%s %2d %2d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
+	printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
 	print $log "@_\n";
     }
 }
@@ -2503,11 +2559,54 @@ sub directive_error( $$$ ) {
     fatal_error $_[0];
 }
 
-sub directive_warning( $$$ ) {
-    my ( $savefilename, $savelineno ) = ( $currentfilename, $currentlinenumber );
-    ( my $warning, $currentfilename, $currentlinenumber ) = @_;
-    warning_message $warning;
-    ( $currentfilename, $currentlinenumber ) = ( $savefilename, $savelineno );
+sub directive_warning( $$$$ ) {
+    if ( shift ) {
+	my ( $savefilename, $savelineno ) = ( $currentfilename, $currentlinenumber );
+	( my $warning, $currentfilename, $currentlinenumber ) = @_;
+	warning_message $warning;
+	( $currentfilename, $currentlinenumber ) = ( $savefilename, $savelineno );
+    } else {
+	our @localtime;
+
+	handle_first_entry if $first_entry;
+
+	$| = 1; #Reset output buffering (flush any partially filled buffers).
+
+	if ( $log ) {
+	    @localtime = localtime;
+	    printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
+	    print $log  "   WARNING: $_[0]\n";
+	}
+
+	print STDERR "   WARNING: $_[0]\n";
+
+	$| = 0; #Re-allow output buffering
+    }
+}
+
+sub directive_info( $$$$ ) {
+    if ( shift ) {
+	my ( $savefilename, $savelineno ) = ( $currentfilename, $currentlinenumber );
+	( my $info, $currentfilename, $currentlinenumber ) = @_;
+	info_message $info;
+	( $currentfilename, $currentlinenumber ) = ( $savefilename, $savelineno );
+    } else {
+	our @localtime;
+
+	handle_first_entry if $first_entry;
+
+	$| = 1; #Reset output buffering (flush any partially filled buffers).
+
+	if ( $log ) {
+	    @localtime = localtime;
+	    printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
+	    print $log  "   INFO: $_[0]\n";
+	}
+
+	print STDERR "   INFO: $_[0]\n";
+
+	$| = 0; #Re-allow output buffering
+    }
 }
 
 #
@@ -2656,7 +2755,7 @@ sub process_compiler_directive( $$$$ ) {
 
     print "CD===> $line\n" if $debug;
 
-    directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber ) unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*|ERROR\s+)(.*)$/i;
+    directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber ) unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*|ERROR\s+|WARNING\s+|INFO\s+|WARNING!\s+|INFO!\s+)(.*)$/i;
 
     my ($keyword, $expression) = ( uc $1, $2 );
 
@@ -2764,14 +2863,14 @@ sub process_compiler_directive( $$$$ ) {
 			      delete $actparams{$var}
 			  }
 		      } else {
-			  directive_warning( "Shorewall variable $2 does not exist", $filename, $linenumber );
+			  directive_warning( 'Yes', "Shorewall variable $2 does not exist", $filename, $linenumber );
 		      }
 
 		  } else {
 		      if ( exists $variables{$2} ) {
 			  delete $variables{$2};
 		      } else {
-			  directive_warning( "Shell variable $2 does not exist", $filename, $linenumber );
+			  directive_warning( 'Yes', "Shell variable $2 does not exist", $filename, $linenumber );
 		      }
 		  }
 	      }
@@ -2785,7 +2884,7 @@ sub process_compiler_directive( $$$$ ) {
 			      ( $comment = $line ) =~ s/^\s*\?COMMENT\s*//;
 			      $comment =~ s/\s*$//;
 			  } else {
-			      directive_warning( "COMMENTs ignored -- require comment support in iptables/Netfilter" , $filename, $linenumber ) unless $warningcount++;
+			      directive_warning( 'Yes', "COMMENTs ignored -- require comment support in iptables/Netfilter" , $filename, $linenumber ) unless $warningcount++;
 			  }
 		      }
 		  } else {
@@ -2801,7 +2900,48 @@ sub process_compiler_directive( $$$$ ) {
 						    1 ) ,
 			       $filename ,
 			       $linenumber ) unless $omitting;
-	  }
+	  } ,
+
+	  WARNING => sub() {
+	      directive_warning( $config{VERBOSE_MESSAGES} ,
+		                 evaluate_expression( $expression ,
+						      $filename ,
+						      $linenumber ,
+						      1 ),
+				 $filename ,
+				 $linenumber ) unless $omitting;
+	  } ,
+
+	  INFO => sub() {
+	      directive_info( $config{VERBOSE_MESSAGES} ,
+			      evaluate_expression( $expression ,
+						   $filename ,
+						   $linenumber ,
+						   1 ),
+			      $filename ,
+			      $linenumber ) unless $omitting;
+	  } ,
+
+	  'WARNING!' => sub() {
+	      directive_warning( ! $config{VERBOSE_MESSAGES} ,
+		                 evaluate_expression( $expression ,
+						      $filename ,
+						      $linenumber ,
+						      1 ),
+				 $filename ,
+				 $linenumber ) unless $omitting;
+	  } ,
+
+	  'INFO!' => sub() {
+	      directive_info( ! $config{VERBOSE_MESSAGES} ,
+			      evaluate_expression( $expression ,
+						   $filename ,
+						   $linenumber ,
+						   1 ),
+			      $filename ,
+			      $linenumber ) unless $omitting;
+	  } ,
+
 	);
 
     if ( my $function = $directives{$keyword} ) {
@@ -3514,7 +3654,7 @@ sub read_a_line($) {
 	    #
 	    # Handle directives
 	    #
-	    if ( /^\s*\?(?:IF|ELSE|ELSIF|ENDIF|SET|RESET|FORMAT|COMMENT|ERROR)/i ) {
+	    if ( /^\s*\?(?:IF|ELSE|ELSIF|ENDIF|SET|RESET|FORMAT|COMMENT|ERROR|WARNING|INFO)/i ) {
 		$omitting = process_compiler_directive( $omitting, $_, $currentfilename, $. );
 		next;
 	    }
@@ -3755,9 +3895,10 @@ my %logoptions = ( tcp_sequence         => '--log-tcp-sequence',
 
 sub validate_level( $;$ ) {
     my ( $rawlevel, $option ) = @_;
-    my $level    = uc $rawlevel;
+    my $level;
 
-    if ( supplied ( $level ) ) {
+    if ( supplied ( $rawlevel ) ) {
+	$level = uc $rawlevel;
 	$level =~ s/!$//;
 	my $value = $level;
 	my $qualifier;
@@ -4894,8 +5035,16 @@ sub ensure_config_path() {
 
     @config_path = split /:/, $config{CONFIG_PATH};
 
+    #
+    # To accomodate Cygwin-based compilation, we have separate directories for files whose names
+    # clash on a case-insensitive filesystem.
+    #
+    push @config_path, $globals{SHAREDIR}    . "/deprecated";
+    push @config_path, $shorewallrc{SHAREDIR}. '/shorewall/deprecated' unless $globals{PRODUCT} eq 'shorewall';
+
     for ( @config_path ) {
 	$_ .= '/' unless m|/$|;
+        s|//|/|g;
     }
 
     if ( $shorewall_dir ) {
@@ -4941,6 +5090,19 @@ sub update_default($$) {
     $config{$var} = $val unless defined $config{$var};
 }
 
+#
+# Transfer the permissions from an old .bak file to a newly-created file
+#
+sub transfer_permissions( $$ ) {
+    my ( $old, $new ) = @_;
+
+    my @stat = stat $old;
+
+    if ( @stat ) {
+	fatal_error "Can't transfer permissions from $old to $new" unless chmod( $stat[2] & 0777, $new );
+    }
+}
+
 sub update_config_file( $ ) {
     my ( $annotate ) = @_;
 
@@ -5090,6 +5252,7 @@ EOF
 
 	if ( system( "diff -q $configfile $configfile.bak > /dev/null" ) ) {
 	    progress_message3 "Configuration file $configfile updated - old file renamed $configfile.bak";
+	    transfer_permissions( "$configfile.bak", $configfile );
 	} else {
 	    if ( rename "$configfile.bak", $configfile ) {
 		progress_message3 "No update required to configuration file $configfile; $configfile.bak not saved";
@@ -5411,7 +5574,7 @@ sub get_params( $ ) {
 		#
 		delete $params{$_};
 	    } else {
-		unless ( $_ eq 'SHOREWALL_INIT_SCRIPT' ) {
+		unless ( $_ eq 'SHOREWALL_INIT_SCRIPT' || $_ eq 'SW_LOGGERTAG' ) {
 		    fatal_error "The variable name $_ is reserved and may not be set in the params file"
 			if /^SW_/ || /^SHOREWALL_/ || ( exists $config{$_} && ! exists $ENV{$_} ) || exists $reserved{$_};
 		}
@@ -5604,6 +5767,24 @@ sub get_configuration( $$$$ ) {
 	$ENV{PATH} = $default_path;
     }
 
+    fatal_error "Shorewall-core does not appear to be installed" unless open_file "$globals{SHAREDIRPL}coreversion";
+
+    fatal_error "$globals{SHAREDIRPL}coreversion is empty" unless read_a_line( PLAIN_READ );
+
+    close_file;
+
+    warning_message "Version Mismatch: Shorewall-core is version $currentline, while the Shorewall version is $globals{VERSION}" unless $currentline eq $globals{VERSION};
+
+    if ( $family == F_IPV6 ) {
+	open_file( "$globals{SHAREDIR}/version" ) || fatal_error "Unable to open $globals{SHAREDIR}/version";
+
+	fatal_error "$globals{SHAREDIR}/version is empty" unless read_a_line( PLAIN_READ );
+
+	close_file;
+
+	warning_message "Version Mismatch: Shorewall6 is version $currentline, while the Shorewall version is $globals{VERSION}" unless $currentline eq $globals{VERSION};
+    }
+
     my $have_capabilities;
 
     if ( $export || $> != 0 ) {
@@ -5851,16 +6032,21 @@ sub get_configuration( $$$$ ) {
     unsupported_yes_no         'BRIDGING';
     unsupported_yes_no_warning 'RFC1918_STRICT';
 
+    $val = $config{SAVE_IPSETS};
+
     unless (default_yes_no 'SAVE_IPSETS', '', '*' ) {
-	$val = $config{SAVE_IPSETS};
-	unless ( $val eq 'ipv4' ) {
+	if ( $val eq 'ipv4' ) {
+	    fatal_error 'SAVE_IPSETS=ipv4 is invalid in shorewall6.conf' if $family == F_IPV6;
+	} else {
 	    my @sets = split_list( $val , 'ipset' );
 	    $globals{SAVED_IPSETS} = \@sets;
-	    require_capability 'IPSET_V5', 'A saved ipset list', 's';
 	    $config{SAVE_IPSETS} = '';
 	}
+
+	require_capability( 'IPSET_V5', "SAVE_IPSETS=$val", 's' ) if $config{SAVE_IPSETS};
     }
 
+
     default_yes_no 'SAVE_ARPTABLES'             , '';
     default_yes_no 'STARTUP_ENABLED'            , 'Yes';
     default_yes_no 'DELAYBLACKLISTLOAD'         , '';
@@ -5991,7 +6177,35 @@ sub get_configuration( $$$$ ) {
 	$config{ACCOUNTING_TABLE} = 'filter';
     }
 
-    default_yes_no 'DYNAMIC_BLACKLIST'          , 'Yes';
+    if ( supplied( $val = $config{DYNAMIC_BLACKLIST} ) ) {
+	if ( $val =~ /^ipset/ ) {
+	    my ( $key, $set, $level, $tag, $rest ) = split( ':', $val , 5 );
+
+	    fatal_error "Invalid DYNAMIC_BLACKLIST setting ( $val )" if $key !~ /^ipset(?:-only)?(?:,src-dst)?$/ || defined $rest;
+
+	    if ( supplied( $set ) ) {
+		fatal_error "Invalid DYNAMIC_BLACKLIST ipset name" unless $set =~ /^[A-Za-z][\w-]*/;
+	    } else {
+		$set = 'SW_DBL' . $family;
+	    }
+
+	    add_ipset( $set );
+	    
+	    $level = validate_level( $level );
+
+	    $tag = '' unless defined $tag;
+
+	    $config{DYNAMIC_BLACKLIST} = join( ':', $key, $set, $level, $tag );
+
+	    require_capability( 'IPSET_V5', 'DYNAMIC_BLACKLIST=ipset...', 's' );
+
+	} else {
+	    default_yes_no( 'DYNAMIC_BLACKLIST', 'Yes' );
+	}
+    } else {
+	default_yes_no( 'DYNAMIC_BLACKLIST', 'Yes' );
+    }
+
     default_yes_no 'REQUIRE_INTERFACE'          , '';
     default_yes_no 'FORWARD_CLEAR_MARK'         , have_capability( 'MARK' ) ? 'Yes' : '';
     default_yes_no 'COMPLETE'                   , '';
@@ -6004,6 +6218,7 @@ sub get_configuration( $$$$ ) {
     default_yes_no 'WARNOLDCAPVERSION'          , 'Yes';
     default_yes_no 'DEFER_DNS_RESOLUTION'       , 'Yes';
     default_yes_no 'MINIUPNPD'                  , '';
+    default_yes_no 'VERBOSE_MESSAGES'           , 'Yes';
 
     $config{IPSET} = '' if supplied $config{IPSET} && $config{IPSET} eq 'ipset';
 
@@ -6503,7 +6718,7 @@ sub generate_aux_config() {
 
     emit "#\n# Shorewall auxiliary configuration file created by Shorewall version $globals{VERSION} - $date\n#";
 
-    for my $option ( qw(VERBOSITY LOGFILE LOGFORMAT ARPTABLES IPTABLES IP6TABLES IP TC IPSET PATH SHOREWALL_SHELL SUBSYSLOCK LOCKFILE RESTOREFILE WORKAROUNDS RESTART) ) {
+    for my $option ( qw(VERBOSITY LOGFILE LOGFORMAT ARPTABLES IPTABLES IP6TABLES IP TC IPSET PATH SHOREWALL_SHELL SUBSYSLOCK LOCKFILE RESTOREFILE WORKAROUNDS RESTART DYNAMIC_BLACKLIST) ) {
 	conditionally_add_option $option;
     }
 

Shorewall/Perl/Shorewall/Misc.pm

@@ -200,6 +200,7 @@ sub remove_blacklist( $ ) {
     if ( $changed ) {
 	rename $fn, "$fn.bak" or fatal_error "Unable to rename $fn to $fn.bak: $!";
 	rename "$fn.new", $fn or fatal_error "Unable to rename $fn.new to $fn: $!";
+	transfer_permissions( "$fn.bak", $fn );
 	progress_message2 "\u$file file $fn saved in $fn.bak"
     }
 }
@@ -302,12 +303,13 @@ sub convert_blacklist() {
 	if ( @rules ) {
 	    my $fn1 = find_writable_file( 'blrules' );
 	    my $blrules;
-	    my $date = localtime;
+	    my $date = compiletime;
 
 	    if ( -f $fn1 ) {
 		open $blrules, '>>', $fn1 or fatal_error "Unable to open $fn1: $!";
 	    } else {
 		open $blrules, '>',  $fn1 or fatal_error "Unable to open $fn1: $!";
+		transfer_permissions( $fn, $fn1 );
 		print $blrules <<'EOF';
 #
 # Shorewall version 5.0 - Blacklist Rules File
@@ -393,7 +395,7 @@ sub convert_routestopped() {
 	my ( @allhosts, %source, %dest , %notrack, @rule );
 
 	my $seq  = 0;
-	my $date = localtime;
+	my $date = compiletime;
 
 	my ( $stoppedrules, $fn1 );
 
@@ -401,6 +403,7 @@ sub convert_routestopped() {
 	    open $stoppedrules, '>>', $fn1 or fatal_error "Unable to open $fn1: $!";
 	} else {
 	    open $stoppedrules, '>',  $fn1 or fatal_error "Unable to open $fn1: $!";
+	    transfer_permissions( $fn, $fn1 );
 	    print $stoppedrules <<'EOF';
 #
 # Shorewall version 5 - Stopped Rules File
@@ -421,7 +424,7 @@ EOF
 
 	first_entry(
 		    sub {
-			my $date = localtime;
+			my $date = compiletime;
 			progress_message2 "$doing $fn...";
 			print( $stoppedrules
 			       "#\n" ,
@@ -646,11 +649,18 @@ sub create_docker_rules() {
 	add_commands( $chainref, 'if [ -n "$g_docker" ]; then' );
 	incr_cmd_level( $chainref );
 	add_ijump( $chainref, j => 'DOCKER', o => 'docker0' );
+	add_ijump( $chainref, j => 'ACCEPT', o => 'docker0', state_imatch 'ESTABLISHED,RELATED' );
 	add_ijump( $chainref, j => 'ACCEPT', i => 'docker0', o => '! docker0' );
 	add_ijump( $chainref, j => 'ACCEPT', i => 'docker0', o => 'docker0' ) if $dockerref->{options}{routeback};
-	add_ijump( $filter_table->{OUTPUT}, j => 'DOCKER' );
 	decr_cmd_level( $chainref );
 	add_commands( $chainref, 'fi' );
+
+	my $outputref;
+	add_commands( $outputref = $filter_table->{OUTPUT}, 'if [ -n "$g_docker" ]; then' );
+	incr_cmd_level( $outputref );
+	add_ijump( $outputref, j => 'DOCKER' );
+	decr_cmd_level( $outputref );
+	add_commands( $outputref, 'fi' );
     }
 
     add_commands( $chainref, '[ -f ${VARDIR}/.filter_FORWARD ] && cat $VARDIR/.filter_FORWARD >&3', );
@@ -674,16 +684,88 @@ sub add_common_rules ( $ ) {
     my $level     = $config{BLACKLIST_LOG_LEVEL};
     my $tag       = $globals{BLACKLIST_LOG_TAG};
     my $rejectref = $filter_table->{reject};
+    my $dbl_type;
+    my $dbl_ipset;
+    my $dbl_level;
+    my $dbl_tag;
+    my $dbl_target;
+
+    if ( $config{REJECT_ACTION} ) {
+	process_reject_action;
+	fatal_eror( "The REJECT_ACTION ($config{REJECT_ACTION}) is not terminating" ) unless terminating( $rejectref );
+    } else {
+	if ( have_capability( 'ADDRTYPE' ) ) {
+	    add_ijump $rejectref , j => 'DROP' , addrtype => '--src-type BROADCAST';
+	} else {
+	    if ( $family == F_IPV4 ) {
+		add_commands $rejectref, 'for address in $ALL_BCASTS; do';
+	    } else {
+		add_commands $rejectref, 'for address in $ALL_ACASTS; do';
+	    }
+
+	    incr_cmd_level $rejectref;
+	    add_ijump $rejectref, j => 'DROP', d => '$address';
+	    decr_cmd_level $rejectref;
+	    add_commands $rejectref, 'done';
+	}
+
+	if ( $family == F_IPV4 ) {
+	    add_ijump $rejectref , j => 'DROP', s => '224.0.0.0/4';
+	} else {
+	    add_ijump $rejectref , j => 'DROP', s => IPv6_MULTICAST;
+	}
+
+	add_ijump $rejectref , j => 'DROP', p => 2;
+	add_ijump $rejectref , j => 'REJECT', targetopts => '--reject-with tcp-reset', p => 6;
+
+	if ( have_capability( 'ENHANCED_REJECT' ) ) {
+	    add_ijump $rejectref , j => 'REJECT', p => 17;
+
+	    if ( $family == F_IPV4 ) {
+		add_ijump $rejectref, j => 'REJECT --reject-with icmp-host-unreachable', p => 1;
+		add_ijump $rejectref, j => 'REJECT --reject-with icmp-host-prohibited';
+	    } else {
+		add_ijump $rejectref, j => 'REJECT --reject-with icmp6-addr-unreachable', p => 58;
+		add_ijump $rejectref, j => 'REJECT --reject-with icmp6-adm-prohibited';
+	    }
+	} else {
+	    add_ijump $rejectref , j => 'REJECT';
+	}
+    }
+
     #
     # Insure that Docker jumps are early in the builtin chains
     #
     create_docker_rules if $config{DOCKER};
 
-    if ( $config{DYNAMIC_BLACKLIST} ) {
-	add_rule_pair( set_optflags( new_standard_chain( 'logdrop' )  , DONT_OPTIMIZE | DONT_DELETE ), '' , 'DROP'   , $level , $tag);
-	add_rule_pair( set_optflags( new_standard_chain( 'logreject' ), DONT_OPTIMIZE | DONT_DELETE ), '' , 'reject' , $level , $tag);
-	$dynamicref =  set_optflags( new_standard_chain( 'dynamic' ) ,  DONT_OPTIMIZE );
-	add_commands( $dynamicref, '[ -f ${VARDIR}/.dynamic ] && cat ${VARDIR}/.dynamic >&3' );
+    if ( my $val = $config{DYNAMIC_BLACKLIST} ) {
+	( $dbl_type, $dbl_ipset, $dbl_level, $dbl_tag ) = split( ':', $val );
+
+	unless ( $dbl_type =~ /^ipset-only/ ) {
+	    add_rule_pair( set_optflags( new_standard_chain( 'logdrop' )  , DONT_OPTIMIZE | DONT_DELETE ), '' , 'DROP'   , $level , $tag);
+	    add_rule_pair( set_optflags( new_standard_chain( 'logreject' ), DONT_OPTIMIZE | DONT_DELETE ), '' , 'reject' , $level , $tag);
+	    $dynamicref =  set_optflags( new_standard_chain( 'dynamic' ) ,  DONT_OPTIMIZE );
+	    add_commands( $dynamicref, '[ -f ${VARDIR}/.dynamic ] && cat ${VARDIR}/.dynamic >&3' );
+	}
+
+	if ( $dbl_ipset ) {
+	    if ( $dbl_level ) {
+		my $chainref = set_optflags( new_standard_chain( $dbl_target = 'dbl_log' ) , DONT_OPTIMIZE | DONT_DELETE );
+
+		log_rule_limit( $dbl_level,
+				$chainref,
+				'dbl_log',
+				'DROP',
+				$globals{LOGLIMIT},
+				$dbl_tag,
+				'add',
+				'',
+				$origin{DYNAMIC_BLACKLIST} );
+		add_ijump_extended( $chainref, j => 'DROP', $origin{DYNAMIC_BLACKLIST} );
+	    } else {
+		$dbl_target = 'DROP'; 
+	    }
+	}
     }
 
     setup_mss;
@@ -787,8 +869,30 @@ sub add_common_rules ( $ ) {
 		}
 	    }
 
+	    if ( $dbl_ipset && ( ( my $setting = get_interface_option( $interface, 'dbl' ) ) ne '0:0' ) ) {
+
+		my ( $in, $out ) = split /:/, $setting;
+
+		if ( $in  == 1 ) {
+		    #
+		    # src
+		    #
+		    add_ijump_extended( $filter_table->{input_option_chain($interface)},   j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset src" );
+		    add_ijump_extended( $filter_table->{forward_option_chain($interface)}, j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset src" );
+		} elsif ( $in == 2 ) {
+		    add_ijump_extended( $filter_table->{forward_option_chain($interface)}, j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset dst" );
+		}
+
+		if ( $out == 2 ) {
+		    #
+		    # dst
+		    #
+		    add_ijump_extended( $filter_table->{output_option_chain($interface)},  j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset dst" );
+		}
+	    }
+	    
 	    for ( option_chains( $interface ) ) {
-		add_ijump_extended( $filter_table->{$_}, j => $dynamicref, $origin{DYNAMIC_BLACKLIST}, @state ) if $dynamicref;
+		add_ijump_extended( $filter_table->{$_}, j => $dynamicref, $origin{DYNAMIC_BLACKLIST}, @state ) if $dynamicref && ( get_interface_option( $interface, 'dbl' ) ne '0:0' );
 		add_ijump_extended( $filter_table->{$_}, j => 'ACCEPT',    $origin{FASTACCEPT},        state_imatch $faststate )->{comment} = '' if $config{FASTACCEPT};
 	    }
 	}
@@ -947,46 +1051,6 @@ sub add_common_rules ( $ ) {
 	}
     }
 
-    unless ( $config{REJECT_ACTION} ) {
-	if ( have_capability( 'ADDRTYPE' ) ) {
-	    add_ijump $rejectref , j => 'DROP' , addrtype => '--src-type BROADCAST';
-	} else {
-	    if ( $family == F_IPV4 ) {
-		add_commands $rejectref, 'for address in $ALL_BCASTS; do';
-	    } else {
-		add_commands $rejectref, 'for address in $ALL_ACASTS; do';
-	    }
-
-	    incr_cmd_level $rejectref;
-	    add_ijump $rejectref, j => 'DROP', d => '$address';
-	    decr_cmd_level $rejectref;
-	    add_commands $rejectref, 'done';
-	}
-
-	if ( $family == F_IPV4 ) {
-	    add_ijump $rejectref , j => 'DROP', s => '224.0.0.0/4';
-	} else {
-	    add_ijump $rejectref , j => 'DROP', s => IPv6_MULTICAST;
-	}
-
-	add_ijump $rejectref , j => 'DROP', p => 2;
-	add_ijump $rejectref , j => 'REJECT', targetopts => '--reject-with tcp-reset', p => 6;
-
-	if ( have_capability( 'ENHANCED_REJECT' ) ) {
-	    add_ijump $rejectref , j => 'REJECT', p => 17;
-
-	    if ( $family == F_IPV4 ) {
-		add_ijump $rejectref, j => 'REJECT --reject-with icmp-host-unreachable', p => 1;
-		add_ijump $rejectref, j => 'REJECT --reject-with icmp-host-prohibited';
-	    } else {
-		add_ijump $rejectref, j => 'REJECT --reject-with icmp6-addr-unreachable', p => 58;
-		add_ijump $rejectref, j => 'REJECT --reject-with icmp6-adm-prohibited';
-	    }
-	} else {
-	    add_ijump $rejectref , j => 'REJECT';
-	}
-    }
-
     $list = find_interfaces_by_option 'dhcp';
 
     if ( @$list ) {
@@ -1112,8 +1176,8 @@ sub add_common_rules ( $ ) {
 	    $announced = 1;
 
 	    for $interface ( @$list ) {
-		add_ijump_extended $nat_table->{PREROUTING} ,  j => 'UPnP',                   get_interface_origin($interface), imatch_source_dev ( $interface );
-		add_ijump_extended $nat_table->{POSTROUTING} , j => 'MINIUPNPD-POSTROUTING' , $origin{MINIUPNPD}              , imatch_dest_dev   ( $interface ) if $chainref1;
+		add_ijump_extended $nat_table->{PREROUTING} ,            j => 'UPnP',                   get_interface_origin($interface), imatch_source_dev ( $interface );
+		add_ijump_extended $nat_table->{$globals{POSTROUTING}} , j => 'MINIUPNPD-POSTROUTING' , $origin{MINIUPNPD}              , imatch_dest_dev   ( $interface ) if $chainref1;
 	    }
 	}
 
@@ -1801,12 +1865,14 @@ sub add_output_jumps( $$$$$$$$ ) {
     my $use_output        = 0;
     my @dest              = imatch_dest_net $net;
     my @ipsec_out_match   = match_ipsec_out $zone , $hostref;
+    my @zone_interfaces   = keys %{zone_interfaces( $zone )};
 
-    if ( @vservers || use_output_chain( $interface, $interfacechainref ) || ( @{$interfacechainref->{rules}} && ! $chain1ref ) ) {
+    if ( @vservers || use_output_chain( $interface, $interfacechainref ) || ( @{$interfacechainref->{rules}} && ! $chain1ref ) || @zone_interfaces > 1 ) {
 	#
 	# - There are vserver zones (so OUTPUT will have multiple source; or
 	# - We must use the interface output chain; or
 	# - There are rules in the interface chain and none in the rules chain
+	# - The zone has multiple interfaces
 	#
 	#   In any of these cases use the inteface output chain
 	#
@@ -1823,7 +1889,7 @@ sub add_output_jumps( $$$$$$$$ ) {
 		unless $output_jump_added{$interface}++;
 	} else {
 	    #
-	    # Not a bridge -- match the input interface
+	    # Not a bridge -- match the output interface
 	    #
 	    add_ijump_extended $filter_table->{OUTPUT}, j => $outputref, $origin, imatch_dest_dev( $interface ) unless $output_jump_added{$interface}++;
 	}
@@ -2433,16 +2499,16 @@ EOF
     emit <<'EOF';
             case $COMMAND in
 	        start)
-	            logger -p kern.err "ERROR:$g_product start failed"
+	            mylogger kern.err "ERROR:$g_product start failed"
 	            ;;
 	        reload)
-	            logger -p kern.err "ERROR:$g_product reload failed"
+	            mylogger kern.err "ERROR:$g_product reload failed"
 	            ;;
 	        refresh)
-	            logger -p kern.err "ERROR:$g_product refresh failed"
+	            mylogger kern.err "ERROR:$g_product refresh failed"
 	            ;;
                 enable)
-                    logger -p kern.err "ERROR:$g_product 'enable $g_interface' failed"
+                    mylogger kern.err "ERROR:$g_product 'enable $g_interface' failed"
                     ;;
             esac
 
@@ -2651,7 +2717,7 @@ EOF
     emit '
 
     set_state "Stopped"
-    logger -p kern.info "$g_product Stopped"
+    mylogger kern.info "$g_product Stopped"
 
     case $COMMAND in
     stop|clear)

Shorewall/Perl/Shorewall/Providers.pm

@@ -392,7 +392,7 @@ sub start_provider( $$$$$ ) {
 }
 
 #
-# Look up a provider and return it's number. If unknown provider, 0 is returned
+# Look up a provider and return a reference to its table entry. If unknown provider, undef is returned
 #
 sub lookup_provider( $ ) {
     my $provider    = $_[0];
@@ -408,7 +408,7 @@ sub lookup_provider( $ ) {
 	}
     }
 
-    $providerref ? $providerref->{number} : 0;
+    $providerref;
 }
 
 #
@@ -666,7 +666,9 @@ sub process_a_provider( $ ) {
     if ( $duplicate ne '-' ) {
 	fatal_error "The DUPLICATE column must be empty when USE_DEFAULT_RT=Yes" if $config{USE_DEFAULT_RT};
 	my $p = lookup_provider( $duplicate );
-	warning_message "Unknown routing table ($duplicate)" unless $p && ( $p == MAIN_TABLE || $p < BALANCE_TABLE );
+	my $n = $p ? $p->{number} : 0;
+	warning_message "Unknown routing table ($duplicate)" unless $n && ( $n == MAIN_TABLE || $n < BALANCE_TABLE );
+	warning_message "An optional provider ($duplicate) is listed in the DUPLICATE column - enable and disable will not work correctly on that provider" if $p && $p->{optional};
     } elsif ( $copy ne '-' ) {
 	fatal_error "The COPY column must be empty when USE_DEFAULT_RT=Yes" if $config{USE_DEFAULT_RT};
 	fatal_error 'A non-empty COPY column requires that a routing table be specified in the DUPLICATE column' unless $copy eq 'none';
@@ -1094,7 +1096,7 @@ CEOF
 
     if ( $optional ) {
 	if ( $persistent ) {
-	    emit( "persistent_${what}_${table}\n" );
+	    emit( "do_persistent_${what}_${table}\n" );
 	}
 
 	if ( $shared ) {

Shorewall/Perl/Shorewall/Raw.pm

@@ -368,12 +368,19 @@ sub setup_conntrack($) {
     if ( $convert ) {
 	my $conntrack;
 	my $empty  = 1;
-	my $date = localtime;
+	my $date = compiletime;
+	my $fn1 = find_writable_file 'conntrack';
 
-	if ( $fn ) {
-	    open $conntrack, '>>', $fn or fatal_error "Unable to open $fn for notrack conversion: $!";
+	$fn = open_file( 'notrack' , 3, 1 ) || fatal_error "Unable to open the notrack file for conversion: $!";
+
+	if ( -f $fn1 ) {
+	    open $conntrack, '>>', $fn1 or fatal_error "Unable to open $fn for notrack conversion: $!";
 	} else {
-	    open $conntrack, '>', $fn = find_file 'conntrack' or fatal_error "Unable to open $fn for notrack conversion: $!";
+	    open $conntrack, '>' , $fn1 or fatal_error "Unable to open $fn for notrack conversion: $!";
+	    #
+	    # Transfer permissions from the existing notrack file
+	    #
+	    transfer_permissions( $fn, $fn1 );
 
 	    print $conntrack <<'EOF';
 #
@@ -396,8 +403,6 @@ EOF
 	       "# Rules generated from notrack file $fn by Shorewall $globals{VERSION} - $date\n" ,
 	       "#\n" );
 
-	$fn = open_file( 'notrack' , 3, 1 ) || fatal_error "Unable to open the notrack file for conversion: $!";
-
 	while ( read_a_line( PLAIN_READ ) ) {
 	    #
 	    # Don't copy the header comments from the old notrack file

Shorewall/Perl/Shorewall/Rules.pm

@@ -2193,10 +2193,16 @@ sub use_policy_action( $$ ) {
 sub process_reject_action() {
     my $rejectref = $filter_table->{reject};
     my $action    = $config{REJECT_ACTION};
+    #
+    # This gets called very early in the compilation process so we fake the section
+    #
+    $section = DEFAULTACTION_SECTION;
 
     if ( ( $targets{$action} || 0 ) == ACTION ) {
 	add_ijump $rejectref, j => use_policy_action( $action, $rejectref->{name} );
     } else {
+	progress_message2 "$doing $actions{$action}->{file} for chain reject...";
+
 	process_inline( $action,      #Inline
 			$rejectref,   #Chain
 			'',           #Matches
@@ -2221,6 +2227,8 @@ sub process_reject_action() {
 			0,            #Wildcard
 	    );
     }
+
+    $section = '';
 }
 
 ################################################################################
@@ -2384,7 +2392,7 @@ sub process_inline ($$$$$$$$$$$$$$$$$$$$$$) {
 
     setup_audit_action( $inline ) if $options & AUDIT_OPT;
 
-    progress_message "..Expanding inline action $inlinefile...";
+    progress_message "..Expanding inline action $inlinefile..." unless $inline eq $config{REJECT_ACTION};
 
     push_open $inlinefile, 2, 1, undef , 2;
 
@@ -3769,7 +3777,7 @@ sub process_rules() {
 			UNTRACKED_SECTION,   'UNTRACKED' );
 
     #
-    # If A_REJECT was specified in shorewall[6].conf, the A_REJECT chain will already exist.
+    # If A_REJECT was specified in shorewall[6].conf, the A_REJECT chain may already exist.
     #
     $usedactions{normalize_action_name( 'A_REJECT' )} = $filter_table->{A_REJECT} if $filter_table->{A_REJECT};
     #
@@ -4456,6 +4464,16 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$ ) {
 	    },
 	},
 
+	NFLOG      => {
+	    defaultchain  => 0,
+	    allowedchains => ALLCHAINS,
+	    minparams     => 0,
+	    maxparams     => 3,
+	    function      => sub () {
+		$target = validate_level( "NFLOG($params)" );
+	    }
+	},
+
 	RESTORE    => {
 	    defaultchain   => 0,
 	    allowedchains  => PREROUTING | INPUT | FORWARD | OUTPUT | POSTROUTING,
@@ -4731,10 +4749,6 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$ ) {
 	}
     }
 
-    unless ( ( $chain || $default_chain ) == OUTPUT ) {
-	fatal_error 'A USER/GROUP may only be specified when the SOURCE is $FW' unless $user eq '-';
-    }
-
     if ( $dest ne '-' ) {
 	if ( $dest eq $fw ) {
 	    fatal_error 'Rules with DEST $FW must use the INPUT chain' if $designator && $designator ne INPUT;
@@ -4777,6 +4791,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$ ) {
 	    fatal_error "Duplicate STATE ($_)" if $state{$_}++;
 	}
     }
+
     #
     # Call the command's processing function
     #
@@ -4787,12 +4802,23 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$ ) {
 	    if ( $chain == ACTIONCHAIN ) {
 		fatal_error "$cmd rules are not allowed in the $chainlabels{$chain} chain" unless $commandref->{allowedchains} & $chainref->{allowedchains};
 		$chainref->{allowedchains} &= $commandref->{allowedchains};
+		$chainref->{allowedchains} &= (OUTPUT | POSTROUTING ) if $user ne '-';
 	    } else {
+		#
+		# Inline within one of the standard chains
+		#
 		fatal_error "$cmd rules are not allowed in the $chainlabels{$chain} chain" unless $commandref->{allowedchains} & $chain;
+		unless ( $chain == OUTPUT || $chain == POSTROUTING  ) {
+		    fatal_error 'A USER/GROUP may only be specified when the SOURCE is $FW' unless $user eq '-';
+		}
 	    }
 	} else {
 	    $resolve_chain->();
 	    fatal_error "$cmd rules are not allowed in the $chainlabels{$chain} chain" unless $commandref->{allowedchains} & $chain;
+	    unless ( $chain == OUTPUT || $chain == POSTROUTING  ) {
+		fatal_error 'A USER/GROUP may only be specified when the SOURCE is $FW' unless $user eq '-';
+	    }
+
 	    $chainref = ensure_chain( 'mangle', $chainnames{$chain} );
 	}
 
@@ -4958,6 +4984,13 @@ sub process_tc_rule1( $$$$$$$$$$$$$$$$ ) {
 			$mark = $rest;
 		    } elsif ( supplied $2 ) {
 			$mark = $2;
+			if ( supplied $mark && $command eq 'IPMARK' ) {
+			    my @params = split ',', $mark;
+			    $params[1] = '0xff' unless supplied $params[1];
+			    $params[2] = '0x00' unless supplied $params[2];
+			    $params[3] = '0'    unless supplied $params[3];
+			    $mark = join ',', @params;
+			}
 		    } else {
 			$mark = '';
 		    }
@@ -4968,7 +5001,7 @@ sub process_tc_rule1( $$$$$$$$$$$$$$$$ ) {
 	}
     }
 	
-    $command = ( $command ? "$command($mark)" : $mark ) . $designator;
+    $command = ( $command ? supplied $mark ? "$command($mark)" : $command : $mark ) . $designator;
     my $line = ( $family == F_IPV6 ?
 		 "$command\t$source\t$dest\t$proto\t$ports\t$sports\t$user\t$testval\t$length\t$tos\t$connbytes\t$helper\t$headers\t$probability\t$dscp\t$state" :
 		 "$command\t$source\t$dest\t$proto\t$ports\t$sports\t$user\t$testval\t$length\t$tos\t$connbytes\t$helper\t$probability\t$dscp\t$state" );

Shorewall/Perl/Shorewall/Tc.pm

@@ -352,7 +352,7 @@ sub process_simple_device() {
 	my $prio = 16 | $i;
 	emit "run_tc qdisc add dev $physical parent $number:$i handle ${number}${i}: sfq quantum 1875 limit 127 perturb 10";
 	emit "run_tc filter add dev $physical protocol all prio $prio parent $number: handle $i fw classid $number:$i";
-	emit "run_tc filter add dev $physical protocol all prio 1 parent ${number}$i: handle ${number}${i} flow hash keys $type divisor 1024" if $type ne '-' && have_capability 'FLOW_FILTER';
+	emit "run_tc filter add dev $physical protocol all prio 1 parent ${number}$i: flow hash keys $type divisor 1024" if $type ne '-' && have_capability 'FLOW_FILTER';
 	emit '';
     }
 
@@ -674,7 +674,8 @@ sub validate_tc_class( ) {
 	$markval = numeric_value( $mark );
 	fatal_error "Invalid MARK ($markval)" unless defined $markval;
 
-	fatal_error "Invalid Mark ($mark)" unless $markval <= $globals{TC_MAX};
+	fatal_error "MARK value too large"        unless $markval <= $globals{TC_MAX};
+	fatal_error "MARK value must be non-zero" unless $markval;
 
 	if ( $classnumber ) {
 	    fatal_error "Duplicate Class NUMBER ($classnumber)" if $tcref->{$classnumber};
@@ -2165,7 +2166,7 @@ sub convert_tos($$) {
     if ( my $fn = open_file 'tos' ) {
 	first_entry(
 		    sub {
-			my $date = localtime;
+			my $date = compiletime;
 			progress_message2 "Converting $fn...";
 			print( $mangle
 			       "#\n" ,
@@ -2233,13 +2234,19 @@ sub convert_tos($$) {
     }
 }
 
-sub open_mangle_for_output() {
+sub open_mangle_for_output( $ ) {
+    my ($fn ) = @_;
     my ( $mangle, $fn1 );
 
     if ( -f ( $fn1 = find_writable_file( 'mangle' ) ) ) {
 	open( $mangle , '>>', $fn1 ) || fatal_error "Unable to open $fn1:$!";
     } else {
 	open( $mangle , '>', $fn1 ) || fatal_error "Unable to open $fn1:$!";
+	#
+	# Transfer permissions from the existing tcrules file to the new mangle file
+	#
+	transfer_permissions( $fn, $fn1 );
+
 	print $mangle <<'EOF';
 #
 # Shorewall version 4 - Mangle File
@@ -2325,13 +2332,13 @@ sub setup_tc( $ ) {
 		#
 		# We are going to convert this tcrules file to the equivalent mangle file
 		#
-		( $mangle, $fn1 ) = open_mangle_for_output;
+		( $mangle, $fn1 ) = open_mangle_for_output( $fn );
 
 		directive_callback( sub () { print $mangle "$_[1]\n" unless $_[0] eq 'FORMAT'; 0; } );
 
 		first_entry(
 			    sub {
-				my $date = localtime;
+				my $date = compiletime;
 				progress_message2 "Converting $fn...";
 				print( $mangle
 				       "#\n" ,
@@ -2375,7 +2382,7 @@ sub setup_tc( $ ) {
 		    #
 		    # We are going to convert this tosfile to the equivalent mangle file
 		    #
-		    ( $mangle, $fn1 ) = open_mangle_for_output;
+		    ( $mangle, $fn1 ) = open_mangle_for_output( $fn );
 		    convert_tos( $mangle, $fn1 );
 		    close $mangle;
 		}

Shorewall/Perl/Shorewall/Zones.pm

@@ -103,7 +103,6 @@ our @EXPORT = ( qw( NOTHING
 		    find_hosts_by_option
 		    find_zone_hosts_by_option
 		    find_zones_by_option
-		    all_ipsets
 		    have_ipsec
 		 ),
 	      );
@@ -210,7 +209,6 @@ our @interfaces;
 our %interfaces;
 our %roots;
 our @bport_zones;
-our %ipsets;
 our %basemap;
 our %basemap1;
 our %mapbase;
@@ -326,7 +324,6 @@ sub initialize( $$ ) {
     %roots = ();
     %interfaces = ();
     @bport_zones = ();
-    %ipsets = ();
     %basemap = ();
     %basemap1 = ();
     %mapbase = ();
@@ -340,6 +337,7 @@ sub initialize( $$ ) {
 				  arp_ignore  => ENUM_IF_OPTION,
 				  blacklist   => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				  bridge      => SIMPLE_IF_OPTION,
+				  dbl         => ENUM_IF_OPTION,
 				  destonly    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				  detectnets  => OBSOLETE_IF_OPTION,
 				  dhcp        => SIMPLE_IF_OPTION,
@@ -348,6 +346,7 @@ sub initialize( $$ ) {
 				  logmartians => BINARY_IF_OPTION,
 				  loopback    => BINARY_IF_OPTION,
 				  nets        => IPLIST_IF_OPTION + IF_OPTION_ZONEONLY + IF_OPTION_VSERVER,
+				  nodbl       => SIMPLE_IF_OPTION,
 				  norfc1918   => OBSOLETE_IF_OPTION,
 				  nosmurfs    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				  optional    => SIMPLE_IF_OPTION,
@@ -389,12 +388,14 @@ sub initialize( $$ ) {
 	%validinterfaceoptions = (  accept_ra   => NUMERIC_IF_OPTION,
 				    blacklist   => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    bridge      => SIMPLE_IF_OPTION,
+				    dbl         => ENUM_IF_OPTION,
 				    destonly    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    dhcp        => SIMPLE_IF_OPTION,
 				    ignore      => NUMERIC_IF_OPTION + IF_OPTION_WILDOK,
 				    loopback    => BINARY_IF_OPTION,
 				    maclist     => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    nets        => IPLIST_IF_OPTION + IF_OPTION_ZONEONLY + IF_OPTION_VSERVER,
+				    nodbl       => SIMPLE_IF_OPTION,
 				    nosmurfs    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    optional    => SIMPLE_IF_OPTION,
 				    optional    => SIMPLE_IF_OPTION,
@@ -1192,6 +1193,7 @@ sub process_interface( $$ ) {
     my %options;
 
     $options{port} = 1 if $port;
+    $options{dbl}  = $config{DYNAMIC_BLACKLIST} =~ /^ipset(-only)?,src-dst/ ? '1:2' : $config{DYNAMIC_BLACKLIST} ? '1:0' : '0:0';
 
     my $hostoptionsref = {};
 
@@ -1235,6 +1237,8 @@ sub process_interface( $$ ) {
 		    } else {
 			warning_message "The 'blacklist' option is ignored on multi-zone interfaces";
 		    }
+		} elsif ( $option eq 'nodbl' ) {
+		    $options{dbl} = '0:0';
 		} else {
 		    $options{$option} = 1;
 		    $hostoptions{$option} = 1 if $hostopt;
@@ -1257,6 +1261,11 @@ sub process_interface( $$ ) {
 		    } else {
 			$options{arp_ignore} = 1;
 		    }
+		} elsif ( $option eq 'dbl' ) {
+		    my %values = ( none => '0:0', src => '1:0', dst => '2:0', 'src-dst' => '1:2' );
+
+		    fatal_error q(The 'dbl' option requires a value) unless defined $value;
+		    fatal_error qq(Invalid setting ($value) for 'dbl') unless defined ( $options{dbl} = $values{$value} );
 		} else {
 		    assert( 0 );
 		}
@@ -1280,7 +1289,7 @@ sub process_interface( $$ ) {
 		    fatal_error q("nets=" may not be specified for a multi-zone interface) unless $zone;
 		    fatal_error "Duplicate $option option" if $netsref;
 		    if ( $value eq 'dynamic' ) {
-			require_capability( 'IPSET_MATCH', 'Dynamic nets', '');
+			require_capability( 'IPSET_V5', 'Dynamic nets', '');
 			$hostoptions{dynamic} = 1;
 			#
 			# Defer remaining processing until we have the final physical interface name
@@ -1344,7 +1353,7 @@ sub process_interface( $$ ) {
 	    my $ipset = $family == F_IPV4 ? "${zone}" : "6_${zone}";
 	    $ipset = join( '_', $ipset, var_base1( $physical ) ) unless $zoneref->{options}{in_out}{dynamic_shared};	    
 	    $netsref = [ "+$ipset" ];
-	    $ipsets{$ipset} = 1;
+	    add_ipset($ipset);
 	}
 
 	if ( $options{bridge} ) {
@@ -1907,7 +1916,7 @@ sub verify_required_interfaces( $ ) {
 
     my $returnvalue = 0;
 
-    my $interfaces = find_interfaces_by_option 'wait';
+    my $interfaces = find_interfaces_by_option( 'wait');
 
     if ( @$interfaces ) {
 	my $first = 1;
@@ -1973,7 +1982,7 @@ sub verify_required_interfaces( $ ) {
 
     }
 
-    $interfaces = find_interfaces_by_option 'required';
+    $interfaces = find_interfaces_by_option( 'required' );
 
     if ( @$interfaces ) {
 
@@ -2153,7 +2162,7 @@ sub process_host( ) {
 
 	$hosts = "+$set";
 	$optionsref->{dynamic} = 1;
-	$ipsets{$set} = 1;
+	add_ipset($set);
     }
 
     #
@@ -2161,7 +2170,7 @@ sub process_host( ) {
     #
     $interface = '%vserver%' if $type & VSERVER;
 
-    add_group_to_zone( $zone, $type , $interface, [ split_list( $hosts, 'host' ) ] , $optionsref, 1 );
+    add_group_to_zone( $zone, $type , $interface, [ split_list( $hosts, 'host' ) ] , $optionsref, 0 );
 
     progress_message "   Host \"$currentline\" validated";
 
@@ -2273,8 +2282,4 @@ sub find_zones_by_option( $$ ) {
     \@zns;
 }
 
-sub all_ipsets() {
-    sort keys %ipsets;
-}
-
 1;

Shorewall/Perl/lib.runtime

@@ -49,7 +49,7 @@
 #					generated this program
 #
 ################################################################################
-# Functions imported from /usr/share/shorewall/lib.core
+# Functions imported from /usr/share/shorewall/lib.runtime
 ################################################################################
 #		      Address family-neutral Functions
 ################################################################################
@@ -1110,7 +1110,7 @@ interface_is_usable() # $1 = interface
 #
 find_interface_addresses() # $1 = interface
 {
-    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 2' | sed 's/\s*inet6 //;s/\/.*//;s/ peer.*//'
+    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 2' | sed 's/\s*inet6 //;s/\/.*//;s/ peer [0-9a-f:]*//'
 }
 
 #
@@ -1119,7 +1119,7 @@ find_interface_addresses() # $1 = interface
 
 find_interface_full_addresses() # $1 = interface
 {
-    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 ' | sed 's/\s*inet6 //;s/ scope.*//;s/ peer.*//'
+    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 ' | sed 's/\s*inet6 //;s/ scope.*//;s/ peer [0-9a-f:]*//'
 }
 
 #

Shorewall/Perl/prog.footer

@@ -25,6 +25,7 @@ usage() {
     echo "   savesets <file>"
     echo "   call <function> [ <parameter> ... ]"
     echo "   version"
+    echo "   info"
     echo
     echo "Options are:"
     echo
@@ -469,6 +470,10 @@ case "$COMMAND" in
 	echo $SHOREWALL_VERSION
 	status=0
 	;;
+    info)
+	[ $# -ne 1 ] && usage 2
+	info_command
+	;;
     help)
 	[ $# -ne 1 ] && usage 2
 	usage 0

Shorewall/Samples/Universal/shorewall.conf

@@ -136,7 +136,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -242,6 +242,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/Samples/one-interface/shorewall.conf

@@ -147,7 +147,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -253,6 +253,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/Samples/three-interfaces/shorewall.conf

@@ -144,7 +144,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -250,6 +250,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/Samples/two-interfaces/shorewall.conf

@@ -147,7 +147,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -253,6 +253,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/action.A_Drop

@@ -23,14 +23,17 @@ COUNT
 #
 Auth(A_DROP)
 #
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before broadcast Drop.
+#
+A_AllowICMPs	-	-	icmp
+#
 # Don't log broadcasts
 #
 dropBcast(audit)
 #
-# ACCEPT critical ICMP types
-#
-A_AllowICMPs	-	-	icmp
-#
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log.
 #

Shorewall/action.A_Reject.deprecated

@@ -18,15 +18,18 @@
 #
 COUNT
 #
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before broadcast Drop.
+#
+A_AllowICMPs	-	-	icmp
+#
 # Drop Broadcasts so they don't clutter up the log
 # (broadcasts must *not* be rejected).
 #
 dropBcast(audit)
 #
-# ACCEPT critical ICMP types
-#
-A_AllowICMPs	-	-	icmp
-#
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log (these ICMPs cannot be
 # rejected).

Shorewall/action.Drop

@@ -10,7 +10,7 @@
 # b) Ensure that certain ICMP packets that are necessary for successful
 #    internet operation are always ACCEPTed.
 #
-# The action accepts five optional parameters:
+# The action accepts six optional parameters:
 #
 # 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
 #     actions.
@@ -22,6 +22,8 @@
 #     A_ACCEPT depending on the first parameter.
 # 5 - Action to take with late UDP replies (UDP source port 53). Default
 #     is DROP or A_DROP depending on the first parameter.
+# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
+#     depending on the first parameter.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 #
@@ -29,12 +31,12 @@
 
 ?if passed(@1)
     ?if @1 eq 'audit'
-DEFAULTS -,-,A_DROP,A_ACCEPT,A_DROP
+DEFAULTS -,-,A_DROP,A_ACCEPT,A_DROP,A_DROP
     ?else
         ?error The first parameter to Drop must be 'audit' or '-'
     ?endif
 ?else
-DEFAULTS -,-,DROP,ACCEPT,DROP
+DEFAULTS -,-,DROP,ACCEPT,DROP,DROP
 ?endif
 
 #ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
@@ -49,14 +51,17 @@ COUNT
 Auth(@2)
 ?endif
 #
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before silent broadcast Drop.
+#
+AllowICMPs(@4)	-	-	icmp
+#
 # Don't log broadcasts
 #
 Broadcast(DROP,@1)
 #
-# ACCEPT critical ICMP types
-#
-AllowICMPs(@4)	-	-	icmp
-#
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log.
 #
@@ -65,7 +70,7 @@ Invalid(DROP,@1)
 # Drop Microsoft noise so that it doesn't clutter up the log.
 #
 SMB(@3)
-DropUPnP
+DropUPnP(@6)
 #
 # Drop 'newnotsyn' traffic so that it doesn't get logged.
 #

Shorewall/action.Reject

@@ -10,7 +10,7 @@
 # b) Ensure that certain ICMP packets that are necessary for successful
 #    internet operation are always ACCEPTed.
 #
-# The action accepts five optional parameters:
+# The action accepts six optional parameters:
 #
 # 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
 #     actions.
@@ -22,18 +22,20 @@
 #     A_ACCEPT depending on the first parameter.
 # 5 - Action to take with late UDP replies (UDP source port 53). Default
 #     is DROP or A_DROP depending on the first parameter.
+# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
+#     depending on the first parameter.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 ###############################################################################
 
 ?if passed(@1)
     ?if @1 eq 'audit'
-DEFAULTS -,-,A_REJECT,A_ACCEPT,A_DROP
+DEFAULTS -,-,A_REJECT,A_ACCEPT,A_DROP,A_DROP
     ?else
 	?error The first parameter to Reject must be 'audit' or '-'
     ?endif
 ?else
-DEFAULTS -,-,REJECT,ACCEPT,DROP
+DEFAULTS -,-,REJECT,ACCEPT,DROP,DROP
 ?endif
 
 #ACTION		SOURCE	DEST	PROTO
@@ -48,15 +50,18 @@ COUNT
 Auth(@2)
 ?endif
 #
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before silent broadcast Drop.
+#
+AllowICMPs(@4)	-	-	icmp
+#
 # Drop Broadcasts so they don't clutter up the log
 # (broadcasts must *not* be rejected).
 #
 Broadcast(DROP,@1)
 #
-# ACCEPT critical ICMP types
-#
-AllowICMPs(@4)	-	-	icmp
-#
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log (these ICMPs cannot be
 # rejected).
@@ -66,7 +71,7 @@ Invalid(DROP,@1)
 # Reject Microsoft noise so that it doesn't clutter up the log.
 #
 SMB(@3)
-DropUPnP(@5)
+DropUPnP(@6)
 #
 # Drop 'newnotsyn' traffic so that it doesn't get logged.
 #

Shorewall/configfiles/shorewall.conf

@@ -242,6 +242,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/install.sh

@@ -419,11 +419,13 @@ mkdir -p ${DESTDIR}${CONFDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${PERLLIBDIR}/Shorewall
 mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles
+mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated
 mkdir -p ${DESTDIR}${VARDIR}
 
 chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
 chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
 chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated
 
 if [ -n "$DESTDIR" ]; then
     mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
@@ -512,7 +514,7 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 # Install the Standard Actions file
 #
 install_file actions.std ${DESTDIR}${SHAREDIR}/$PRODUCT/actions.std 0644
-echo "Standard actions file installed as ${DESTDIR}${SHAREDIR}d/$PRODUCT/actions.std"
+echo "Standard actions file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/actions.std"
 
 cd configfiles
 
@@ -1060,15 +1062,31 @@ fi
 # Install the Action files
 #
 for f in action.* ; do
-    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-    echo "Action ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+    case $f in
+	*.deprecated)
+	    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated/${f%.*} 0644
+	    echo "Action ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated/${f%.*}"
+	    ;;
+	*)
+	    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+	    echo "Action ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+	    ;;
+    esac
 done
 
 cd Macros
 
 for f in macro.* ; do
-    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-    echo "Macro ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+    case $f in
+	*.deprecated)
+	    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated/${f%.*} 0644
+	    echo "Macro ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated/${f%.*}"
+	    ;;
+	*)
+	    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+	    echo "Macro ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+	    ;;
+    esac
 done
 
 cd ..
@@ -1159,6 +1177,8 @@ fi
 # Install the Man Pages
 #
 
+if [ -n "$MANDIR" ]; then
+
 cd manpages
 
 [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
@@ -1178,6 +1198,7 @@ done
 cd ..
 
 echo "Man Pages Installed"
+fi
 
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
     run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
@@ -1194,7 +1215,7 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
     fi
 
     run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT
-    echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+    echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then

Shorewall/lib.cli-std

@@ -333,6 +333,38 @@ get_config() {
 	g_pager="| $g_pager"
     fi
 
+    if [ -n "$DYNAMIC_BLACKLIST" ]; then
+	case $DYNAMIC_BLACKLIST in
+	    [Nn]o)
+		DYNAMIC_BLACKLIST='';
+		;;
+	    [Yy]es)
+	        ;;
+	    ipset|ipset::*|ipset-only|ipset-only::*|ipset,src-dst|ipset-only,src-dst::*)
+		g_blacklistipset=SW_DBL$g_family
+		;;
+	    ipset:[a-zA-Z]*)
+		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset:}
+		g_blacklistipset=${g_blacklistipset%%:*}
+		;;
+	    ipset,src-dst:[a-zA-Z]*)
+		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset,src-dst:}
+		g_blacklistipset=${g_blacklistipset%%:*}
+		;;
+	    ipset-only:[a-zA-Z]*)
+		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset-only:}
+		g_blacklistipset=${g_blacklistipset%%:*}
+		;;
+	    ipset-only,src-dst:[a-zA-Z]*)
+		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset-only,src-dst:}
+		g_blacklistipset=${g_blacklistipset%%:*}
+		;;
+	    *)
+		fatal_error "Invalid value ($DYNAMIC_BLACKLIST) for DYNAMIC_BLACKLIST"
+		;;
+	esac
+    fi
+
     lib=$(find_file lib.cli-user)
 
     [ -f $lib ] && . $lib
@@ -403,7 +435,7 @@ compiler() {
     get_config Yes
 
     case $COMMAND in
-	*start|try|refresh)
+	*start|try|refresh|reload|restart|safe-*)
 	    ;;
 	*)
 	    STARTUP_LOG=
@@ -461,13 +493,13 @@ compiler() {
 
     case "$g_doing" in
 	Compiling|Checking)
-	    progress_message3 "$g_doing using $g_product $SHOREWALL_VERSION..."
+	    progress_message3 "$g_doing using Shorewall $SHOREWALL_VERSION..."
 	    ;;
 	Updating)
 	    progress_message3 "Updating $g_product configuration to $SHOREWALL_VERSION..."
 	    ;;
 	*)
-	    [ -n "$g_doing" ] && progress_message3 "$g_doing using $g_product $SHOREWALL_VERSION..."
+	    [ -n "$g_doing" ] && progress_message3 "$g_doing using Shorewall $SHOREWALL_VERSION..."
 	    ;;
     esac
     #
@@ -498,7 +530,6 @@ compiler() {
 start_command() {
     local finished
     finished=0
-    local object
     local rc
     rc=0
 
@@ -517,7 +548,7 @@ start_command() {
 		[ -n "$nolock" ] || mutex_off
 	    else
 		rc=$?
-		logger -p kern.err "ERROR:$g_product start failed"
+		mylogger kern.err "ERROR:$g_product start failed"
 	    fi
 	fi
 
@@ -573,7 +604,7 @@ start_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -589,7 +620,8 @@ start_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" -o -n "$g_fast" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
+	    [ -n "$g_fast" ]         && fatal_error "Directory may not be specified with the -f option"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -603,12 +635,12 @@ start_command() {
 	    AUTOMAKE=
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
     if [ -n "${g_fast}${AUTOMAKE}" ]; then
-	if ! uptodate ${VARDIR}/$object; then
+	if ! uptodate ${VARDIR}/firewall; then
 	    g_fast=
 	    AUTOMAKE=
 	fi
@@ -632,8 +664,6 @@ compile_command() {
 		shift
 		option=${option#-}
 
-		[ -z "$option" ] && usage 1
-
 		while [ -n "$option" ]; do
 		    case $option in
 			e*)
@@ -670,7 +700,7 @@ compile_command() {
 			    option=
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -692,7 +722,7 @@ compile_command() {
 	    [ -d "$g_file" ] && fatal_error "$g_file is a directory"
 	    ;;
 	2)
-	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && usage 2
+	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -706,7 +736,7 @@ compile_command() {
 	    g_file=$2
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -760,7 +790,7 @@ check_command() {
 			    option=${option#i}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -776,7 +806,7 @@ check_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && usage 2
+	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -789,7 +819,7 @@ check_command() {
 	    g_shorewalldir=$(resolve_file $1)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -852,7 +882,7 @@ update_command() {
 			    option=${option#A}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -868,7 +898,7 @@ update_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -881,7 +911,7 @@ update_command() {
 	    g_shorewalldir=$(resolve_file $1)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -946,7 +976,7 @@ restart_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -962,7 +992,7 @@ restart_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -977,7 +1007,7 @@ restart_command() {
 	    AUTOMAKE=
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -997,7 +1027,7 @@ restart_command() {
 	    [ -n "$nolock" ] || mutex_off
 	else
 	    rc=$?
-	    logger -p kern.err "ERROR:$g_product ${COMMAND} failed"
+	    mylogger kern.err "ERROR:$g_product ${COMMAND} failed"
 	fi
     else
 	[ -x ${VARDIR}/firewall ] || fatal_error "No ${VARDIR}/firewall file found"
@@ -1055,7 +1085,7 @@ refresh_command() {
 			    fi
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1138,7 +1168,7 @@ safe_commands() {
 			    shift;
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1154,7 +1184,7 @@ safe_commands() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -1167,7 +1197,7 @@ safe_commands() {
 	    g_shorewalldir=$(resolve_file $1)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -1255,7 +1285,7 @@ try_command() {
     timeout=
 
     handle_directory() {
-	[ -n "$g_shorewalldir" ] && usage 2
+	[ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	if [ ! -d $1 ]; then
 	    if [ -e $1 ]; then
@@ -1285,7 +1315,7 @@ try_command() {
 			    option=${option#n}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1299,7 +1329,7 @@ try_command() {
 
     case $# in
 	0)
-	    usage 1
+	    missing_argument
 	    ;;
 	1)
 	    handle_directory $1
@@ -1310,7 +1340,7 @@ try_command() {
 	    timeout=$2
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -1449,7 +1479,7 @@ remote_reload_command() # $* = original arguments less the command.
 			    option=${option#i}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1462,6 +1492,9 @@ remote_reload_command() # $* = original arguments less the command.
     done
 
     case $# in
+	0)
+	    missing_argument
+	    ;;
 	1)
 	    g_shorewalldir="."
 	    system=$1
@@ -1471,7 +1504,7 @@ remote_reload_command() # $* = original arguments less the command.
 	    system=$2
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -1711,7 +1744,7 @@ compiler_command() {
 	    safe_commands $@
 	    ;;
 	*)
-	    usage 1
+	    fatal_error "Invalid command: $COMMAND"
 	    ;;
     esac
 

Shorewall/manpages/shorewall-actions.xml

@@ -130,6 +130,18 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><option>logjump</option></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.8. Performs the same function as
+                <option>nolog</option> (below), with the addition that the
+                jump to the actions chain is logged if a log level is
+                specified on the action invocation. For inline actions, this
+                option is identical to <option>nolog</option>.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><option>mangle</option></term>
 

Shorewall/manpages/shorewall-interfaces.xml

@@ -306,6 +306,72 @@ loc     eth2            -</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">dbl={none|src|dst|src-dst}</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.10. This option defined whether
+                or not dynamic blacklisting is applied to packets entering the
+                firewall through this interface and whether the source address
+                and/or destination address is to be compared against the
+                ipset-based dynamic blacklist (DYNAMIC_BLACKLIST=ipset... in
+                <ulink
+                url="manpages/shorewall.conf.html">shorewall.conf(5)</ulink>).
+                The default is determine by the setting of
+                DYNAMIC_BLACKLIST:</para>
+
+                <variablelist>
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=No</term>
+
+                    <listitem>
+                      <para>Default is <emphasis role="bold">none</emphasis>
+                      (e.g., no dynamic blacklist checking).</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=Yes</term>
+
+                    <listitem>
+                      <para>Default is <emphasis role="bold">src</emphasis>
+                      (e.g., the source IP address is checked).</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=ipset[-only]</term>
+
+                    <listitem>
+                      <para>Default is <emphasis
+                      role="bold">src</emphasis>.</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=ipset[-only],src-dst...</term>
+
+                    <listitem>
+                      <para>Default is <emphasis
+                      role="bold">src-dst</emphasis> (e.g., the source IP
+                      addresses in checked against the ipset on input and the
+                      destination IP address is checked against the ipset on
+                      packets originating from the firewall and leaving
+                      through this interface).</para>
+                    </listitem>
+                  </varlistentry>
+                </variablelist>
+
+                <para>The normal setting for this option will be <emphasis
+                role="bold">dst</emphasis> or <emphasis
+                role="bold">none</emphasis> for internal interfaces and
+                <emphasis role="bold">src</emphasis> or <emphasis
+                role="bold">src-dst</emphasis> for Internet-facing
+                interfaces.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">destonly</emphasis></term>
 
@@ -348,7 +414,7 @@ loc     eth2            -</programlisting>
                       url="../bridge-Shorewall-perl.html">Shorewall-perl for
                       firewall/bridging</ulink>, then you need to include
                       DHCP-specific rules in <ulink
-                      url="/manpages/shorewall-rules.html">shorewall-rules</ulink>(8).
+                      url="/manpages/shorewall-rules.html">shorewall-rules</ulink>(5).
                       DHCP uses UDP ports 67 and 68.</para>
                     </note>
                   </listitem>
@@ -380,7 +446,7 @@ loc     eth2            -</programlisting>
             </varlistentry>
 
             <varlistentry>
-              <term>loopback</term>
+              <term><emphasis role="bold">loopback</emphasis></term>
 
               <listitem>
                 <para>Added in Shorewall 4.6.6. Designates the interface as
@@ -451,8 +517,8 @@ loc     eth2            -</programlisting>
             </varlistentry>
 
             <varlistentry>
-              <term><emphasis
-              role="bold">mss</emphasis>=<emphasis>number</emphasis></term>
+              <term><emphasis role="bold"><emphasis
+              role="bold">mss</emphasis>=</emphasis><emphasis>number</emphasis></term>
 
               <listitem>
                 <para>Added in Shorewall 4.0.3. Causes forwarded TCP SYN
@@ -488,6 +554,18 @@ loc     eth2            -</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis role="bold">nodbl</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.8. When specified, dynamic
+                blacklisting is disabled on the interface. Beginning with
+                Shorewall 5.0.10, <emphasis role="bold">nodbl</emphasis> is
+                equivalent to <emphasis
+                role="bold">dbl=none</emphasis>.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">nosmurfs</emphasis></term>
 

Shorewall/manpages/shorewall-mangle.xml

@@ -504,7 +504,7 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
 
                     <member>0xc0a80403 LAND 0xFF = 0x03</member>
 
-                    <member>0x03 LOR 0x0x10100 = 0x10103 or class ID
+                    <member>0x03 LOR 0x10100 = 0x10103 or class ID
                     1:103</member>
                   </simplelist>
                 </blockquote>
@@ -598,6 +598,36 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">NFLOG</emphasis>[(<emphasis>nflog-parameters</emphasis>)]</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.9. Logs matching packets using
+                NFLOG. The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1.</para>
+                  </listitem>
+                </itemizedlist>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">RESTORE</emphasis>[(<emphasis>mask</emphasis>)]</term>

Shorewall/manpages/shorewall-rules.xml

@@ -595,9 +595,32 @@
                 <para>Added in Shorewall 4.5.9.3. Queues matching packets to a
                 back end logging daemon via a netlink socket then continues to
                 the next rule. See <ulink
-                url="/shorewall.logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
+                url="/shorewall.logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.
+                </para>
 
-                <para>Similar to<emphasis role="bold">
+                <para>The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1.</para>
+                  </listitem>
+                </itemizedlist>
+
+                <para>NFLOG is similar to<emphasis role="bold">
                 LOG:NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)],
                 except that the log level is not changed when this ACTION is
                 used in an action or macro body and the invocation of that

Shorewall/manpages/shorewall-tcclasses.xml

@@ -156,20 +156,23 @@
 
       <varlistentry>
         <term><emphasis role="bold">MARK</emphasis> -
-        {-|<emphasis>value</emphasis>}</term>
+        {-|<replaceable>value</replaceable>[:<replaceable>priority</replaceable>]}</term>
 
         <listitem>
           <para>The mark <emphasis>value</emphasis> which is an integer in the
           range 1-255. You set mark values in the <ulink
           url="/manpages/shorewall-mangle.html">shorewall-mangle</ulink>(5)
           file, marking the traffic you want to fit in the classes defined in
-          here. Must be specified as '-' if the <emphasis
-          role="bold">classify</emphasis> option is given for the interface in
-          <ulink
-          url="/manpages/shorewall-tcdevices.html">shorewall-tcdevices</ulink>(5)
-          and you are running Shorewall 4.5.5 or earlier.</para>
+          here. You can use the same marks for different interfaces.</para>
 
-          <para>You can use the same marks for different interfaces.</para>
+          <para>The <replaceable>priority</replaceable>, if specified, is an
+          integer in the range 1-65535 and determines the relative order in
+          which the tc mark classification filter for this class is to be
+          applied to packets being sent on the
+          <replaceable>interface</replaceable>. Filters are applied in
+          ascending numerical order. If not supplied, the value is derived
+          from the class priority (PRIORITY column value below):
+          (<replaceable>class priority</replaceable> &lt;&lt; 8) | 20.</para>
         </listitem>
       </varlistentry>
 
@@ -293,7 +296,7 @@
                 <para>This is the default class for that interface where all
                 traffic should go, that is not classified otherwise.</para>
 
-                <para></para>
+                <para/>
 
                 <note>
                   <para>You must define <emphasis
@@ -320,7 +323,7 @@
                 priority determines the order in which filter rules are
                 processed during packet classification. If not specified, the
                 value (<replaceable>class priority</replaceable> &lt;&lt; 8) |
-                10) is used.</para>
+                15) is used.</para>
               </listitem>
             </varlistentry>
 
@@ -339,7 +342,7 @@
                 (":") and a <replaceable>priority</replaceable>. This priority
                 determines the order in which filter rules are processed
                 during packet classification. If not specified, the value
-                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 10)
+                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 15)
                 is used.</para>
 
                 <programlisting>        <emphasis role="bold">tos-minimize-delay</emphasis>       0x10/0x10
@@ -372,7 +375,7 @@
                 (":") and a <replaceable>priority</replaceable>. This priority
                 determines the order in which filter rules are processed
                 during packet classification. If not specified, the value
-                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 20)
+                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 10)
                 is used.</para>
 
                 <note>

Shorewall/manpages/shorewall.conf.xml

@@ -761,15 +761,38 @@
 
       <varlistentry>
         <term><emphasis role="bold">DYNAMIC_BLACKLIST=</emphasis>{<emphasis
-        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>
+        role="bold">Yes</emphasis>|<emphasis
+        role="bold">No</emphasis>||<emphasis
+        role="bold">ipset</emphasis>[<emphasis
+        role="bold">-only</emphasis>][,<emphasis
+        role="bold">src-dst</emphasis>][:[<replaceable>setname</replaceable>][:<replaceable>log_level</replaceable>|:l<replaceable>og_tag</replaceable>]]]}</term>
 
         <listitem>
           <para>Added in Shorewall 4.4.7. When set to <emphasis
           role="bold">No</emphasis> or <emphasis role="bold">no</emphasis>,
-          dynamic blacklisting using the <command>shorewall drop</command>,
-          <command>shorewall reject</command>, <command>shorewall
-          logdrop</command> and <command>shorewall logreject</command> is
-          disabled. Default is <emphasis role="bold">Yes</emphasis>.</para>
+          chain-based dynamic blacklisting using the <command>shorewall6
+          drop</command>, <command>shorewall6 reject</command>,
+          <command>shorewall6 logdrop</command> and <command>shorewall6
+          logreject</command> is disabled. Default is <emphasis
+          role="bold">Yes</emphasis>. Beginning with Shorewall 5.0.8,
+          ipset-based dynamic blacklisting is also supported. The name of the
+          set (<replaceable>setname</replaceable>) and the level
+          (<replaceable>log_level</replaceable>), if any, at which blacklisted
+          traffic is to be logged may also be specified. The default set name
+          is SW_DBL4 and the default log level is <option>none</option> (no
+          logging). if <option>ipset-only</option> is given, then chain-based
+          dynamic blacklisting is disabled just as if DYNAMIC_BLACKLISTING=No
+          had been specified. Normally, only packets whose source address
+          matches an entry in the ipsec are dropped. If
+          <option>src-dst</option> is included, then packets whose destination
+          address matches an entry in the ipset are also dropped.</para>
+
+          <para>When ipset-based dynamic blacklisting is enabled, the contents
+          of the blacklist will be preserved over
+          <command>stop</command>/<command>reboot</command>/<command>start</command>
+          sequences if SAVE_IPSETS=Yes, SAVE_IPSETS=ipv4 or if
+          <replaceable>setname</replaceable> is included in the list of sets
+          to be saved in SAVE_IPSETS.</para>
         </listitem>
       </varlistentry>
 
@@ -824,7 +847,8 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
           packets until these packets reach the chain in which the original
           connection was accepted. So for packets going from the 'loc' zone to
           the 'net' zone, ESTABLISHED/RELATED packets are ACCEPTED in the
-          'loc2net' chain.</para>
+          'loc-net' or 'loc2net' chain, depending on the setting of ZONE2ZONE
+          (see below).</para>
 
           <para>If you set FASTACCEPT=Yes, then ESTABLISHED/RELATED packets
           are accepted early in the INPUT, FORWARD and OUTPUT chains. If you
@@ -2480,8 +2504,10 @@ INLINE          -       -       -       ; -j REJECT
           <para>If specified, determines where Shorewall will log the details
           of each <emphasis role="bold">start</emphasis>, <emphasis
           role="bold">reload</emphasis>, <emphasis
-          role="bold">restart</emphasis> and <emphasis
-          role="bold">refresh</emphasis> command. Logging verbosity is
+          role="bold">restart</emphasis>, <emphasis
+          role="bold">refresh</emphasis>, <emphasis
+          role="bold">try</emphasis>, and <emphasis
+          role="bold">safe-</emphasis>* command. Logging verbosity is
           determined by the setting of LOG_VERBOSITY above.</para>
         </listitem>
       </varlistentry>
@@ -2838,6 +2864,20 @@ INLINE          -       -       -       ; -j REJECT
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">VERBOSE_MESSAGES=</emphasis>[<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.9. When Yes (the default), messages
+          produced by the ?INFO and ?WARNING directives include the filename
+          and linenumber of the directive. When set to No, that additional
+          information is omitted. The setting may be overridden on a directive
+          by directive basis by following ?INFO or ?WARNING with '!' (no
+          intervening white space).</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis
         role="bold">VERBOSITY=</emphasis>[<emphasis>number</emphasis>]</term>

Shorewall/manpages/shorewall.xml

@@ -49,6 +49,19 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>blacklist</option></arg>
+
+      <arg choice="plain"><replaceable>address</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall</command>
 
@@ -951,7 +964,28 @@
           blacklisted by a <emphasis role="bold">drop</emphasis>, <emphasis
           role="bold">logdrop</emphasis>, <emphasis
           role="bold">reject</emphasis>, or <emphasis
-          role="bold">logreject</emphasis> command.</para>
+          role="bold">logreject</emphasis> command. Beginning with Shorewall
+          5.0.10, this command can also re-enable addresses blacklisted using
+          the <command>blacklist</command> command.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">blacklist</emphasis>
+        <replaceable>address</replaceable> [ <replaceable>option</replaceable>
+        ... ]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8 and requires
+          DYNAMIC_BLACKLIST=ipset.. in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).
+          Causes packets from the given host or network
+          <replaceable>address</replaceable> to be dropped, based on the
+          setting of BLACKLIST in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). The
+          <replaceable>address</replaceable> along with any
+          <replaceable>option</replaceable>s are passed to the <command>ipset
+          add</command> command.</para>
         </listitem>
       </varlistentry>
 
@@ -2593,6 +2627,34 @@
     started.</para>
   </refsect1>
 
+  <refsect1>
+    <title>ENVIRONMENT</title>
+
+    <para>Two environmental variables are recognized by Shorewall:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term>SHOREWALL_INIT_SCRIPT</term>
+
+        <listitem>
+          <para>When set to 1, causes Std out to be redirected to the file
+          specified in the STARTUP_LOG option in <ulink
+          url="shorewall.conf.html">shorewall.conf(5)</ulink>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>SW_LOGGERTAG</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8. When set to a non-empty value, that
+          value is passed to the logger utility in its -t (--tag)
+          option.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
   <refsect1>
     <title>FILES</title>
 

Shorewall/uninstall.sh

@@ -215,7 +215,7 @@ rm -rf ${SHAREDIR}/shorewall/configfiles/
 rm -rf ${SHAREDIR}/shorewall/Samples/
 rm -rf ${SHAREDIR}/shorewall/Shorewall/
 rm -f  ${SHAREDIR}/shorewall/lib.cli-std
-rm -f  ${SHAREDIR}/shorewall/lib.core
+rm -f  ${SHAREDIR}/shorewall/lib.runtime
 rm -f  ${SHAREDIR}/shorewall/compiler.pl
 rm -f  ${SHAREDIR}/shorewall/prog.*
 rm -f  ${SHAREDIR}/shorewall/module*

Shorewall6-lite/manpages/shorewall6-lite.xml

@@ -47,6 +47,19 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall6-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>blacklist</option></arg>
+
+      <arg choice="plain"><replaceable>address</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall6-lite</command>
 
@@ -666,7 +679,28 @@
           <para>Re-enables receipt of packets from hosts previously
           blacklisted by a <command>drop</command>,
           <command>logdrop</command>, <command>reject</command>, or
-          <command>logreject</command> command.</para>
+          <command>logreject</command> command. Beginning with Shorewall
+          5.0.10, this command can also re-enable addresses blacklisted using
+          the <command>blacklist</command> command.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">blacklist</emphasis>
+        <replaceable>address</replaceable> [ <replaceable>option</replaceable>
+        ... ]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8 and requires
+          DYNAMIC_BLACKLIST=ipset.. in <ulink
+          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5).
+          Causes packets from the given host or network
+          <replaceable>address</replaceable> to be dropped, based on the
+          setting of BLACKLIST in <ulink
+          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5).
+          The <replaceable>address</replaceable> along with any
+          <replaceable>option</replaceable>s are passed to the <command>ipset
+          add</command> command.</para>
         </listitem>
       </varlistentry>
 
@@ -1515,6 +1549,35 @@
     started.</para>
   </refsect1>
 
+  <refsect1>
+    <title>ENVIRONMENT</title>
+
+    <para>Two environmental variables are recognized by
+    Shorewall6-lite:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term>SHOREWALL_INIT_SCRIPT</term>
+
+        <listitem>
+          <para>When set to 1, causes Std out to be redirected to the file
+          specified in the STARTUP_LOG option in <ulink
+          url="shorewall6.conf.html">shorewall6.conf(5)</ulink>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>SW_LOGGERTAG</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8. When set to a non-empty value, that
+          value is passed to the logger utility in its -t (--tag)
+          option.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
   <refsect1>
     <title>See ALSO</title>
 

Shorewall6/Samples6/Universal/shorewall6.conf

@@ -129,7 +129,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -213,6 +213,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/Samples6/one-interface/shorewall6.conf

@@ -130,7 +130,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -214,6 +214,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/Samples6/three-interfaces/shorewall6.conf

@@ -129,7 +129,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -213,6 +213,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/Samples6/two-interfaces/shorewall6.conf

@@ -129,7 +129,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -213,6 +213,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/configfiles/shorewall6.conf

@@ -213,6 +213,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/manpages/shorewall6-interfaces.xml

@@ -237,6 +237,66 @@ loc     eth2            -</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">dbl={none|src|dst|src-dst}</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.10. This option defined whether
+                or not dynamic blacklisting is applied to packets entering the
+                firewall through this interface and whether the source address
+                and/or destination address is to be compared against the
+                ipset-based dynamic blacklist (DYNAMIC_BLACKLIST=ipset... in
+                <ulink
+                url="manpages6/shorewall6.conf.html">shorewall6.conf(5)</ulink>).
+                The default is determine by the setting of
+                DYNAMIC_BLACKLIST:</para>
+
+                <variablelist>
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=No</term>
+
+                    <listitem>
+                      <para>Default is <emphasis role="bold">none</emphasis>
+                      (e.g., no dynamic blacklist checking).</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=Yes</term>
+
+                    <listitem>
+                      <para>Default is <emphasis role="bold">src</emphasis>
+                      (e.g., the source IP address is checked against the
+                      ipset).</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=ipset[-only]</term>
+
+                    <listitem>
+                      <para>Default is <emphasis
+                      role="bold">src</emphasis>.</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=ipset[-only],src-dst...</term>
+
+                    <listitem>
+                      <para>Default is <emphasis
+                      role="bold">src-dst</emphasis> (e.g., the source IP
+                      addresses in checked against the ipset on input and the
+                      destination IP address is checked against the ipset on
+                      packets originating from the firewall and leaving
+                      through this interface).</para>
+                    </listitem>
+                  </varlistentry>
+                </variablelist>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">destonly</emphasis></term>
 
@@ -321,7 +381,7 @@ loc     eth2            -</programlisting>
             </varlistentry>
 
             <varlistentry>
-              <term>loopback</term>
+              <term><emphasis role="bold">loopback</emphasis></term>
 
               <listitem>
                 <para>Added in Shorewall 4.6.6. Designates the interface as
@@ -365,6 +425,18 @@ loc     eth2            -</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis role="bold">nodbl</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.8. When specified, dynamic
+                blacklisting is disabled on the interface. Beginning with
+                Shorewall 5.0.10, <emphasis role="bold">nodbl</emphasis> is
+                equivalent to <emphasis
+                role="bold">dbl=none</emphasis>.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">optional</emphasis></term>
 

Shorewall6/manpages/shorewall6-mangle.xml

@@ -515,7 +515,7 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
 
                     <member>0xc0a80403 LAND 0xFF = 0x03</member>
 
-                    <member>0x03 LOR 0x0x10100 = 0x10103 or class ID
+                    <member>0x03 LOR 0x10100 = 0x10103 or class ID
                     1:103</member>
                   </simplelist>
                 </blockquote>
@@ -609,6 +609,36 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">NFLOG</emphasis>[(<emphasis>nflog-parameters</emphasis>)]</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.9. Logs matching packets using
+                NFLOG. The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1. </para>
+                  </listitem>
+                </itemizedlist>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">RESTORE</emphasis>[(<emphasis>mask</emphasis>)]</term>

Shorewall6/manpages/shorewall6-rules.xml

@@ -574,7 +574,29 @@
                 the next rule. See <ulink
                 url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
 
-                <para>Similar to<emphasis role="bold">
+                <para>The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1.</para>
+                  </listitem>
+                </itemizedlist>
+
+                <para>NFLOG is similar to<emphasis role="bold">
                 LOG:NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)],
                 except that the log level is not changed when this ACTION is
                 used in an action or macro and the invocation of that action
@@ -1636,7 +1658,7 @@
             <varlistentry>
               <term><emphasis role="bold">route</emphasis>, <emphasis
               role="bold">ipv6-route</emphasis> or <emphasis
-              role="bold">41</emphasis></term>
+              role="bold">43</emphasis></term>
 
               <listitem>
                 <para>IPv6 Route extension header.</para>

Shorewall6/manpages/shorewall6-tcclasses.xml

@@ -152,20 +152,23 @@
 
       <varlistentry>
         <term><emphasis role="bold">MARK</emphasis> -
-        {-|<emphasis>value</emphasis>}</term>
+        {-|<replaceable>value</replaceable>[:<replaceable>priority</replaceable>]}</term>
 
         <listitem>
           <para>The mark <emphasis>value</emphasis> which is an integer in the
           range 1-255. You set mark values in the <ulink
-          url="/manpages6/shorewall6-mangle.html">shorewall6-mangle</ulink>(5)
+          url="/manpages/shorewall-mangle.html">shorewall-mangle</ulink>(5)
           file, marking the traffic you want to fit in the classes defined in
-          here. Must be specified as '-' if the <emphasis
-          role="bold">classify</emphasis> option is given for the interface in
-          <ulink
-          url="/manpages6/shorewall6-tcdevices.html">shorewall6-tcdevices</ulink>(5)
-          and you are running Shorewall 4.5 5 or earlier.</para>
+          here. You can use the same marks for different interfaces.</para>
 
-          <para>You can use the same marks for different interfaces.</para>
+          <para>The <replaceable>priority</replaceable>, if specified, is an
+          integer in the range 1-65535 and determines the relative order in
+          which the tc mark classification filter for this class is to be
+          applied to packets being sent on the
+          <replaceable>interface</replaceable>. Filters are applied in
+          ascending numerical order. If not supplied, the value is derived
+          from the class priority (PRIORITY column value below):
+          (<replaceable>class priority</replaceable> &lt;&lt; 8) | 20.</para>
         </listitem>
       </varlistentry>
 
@@ -314,7 +317,7 @@
                 priority determines the order in which filter rules are
                 processed during packet classification. If not specified, the
                 value (<replaceable>class priority</replaceable> &lt;&lt; 8) |
-                10) is used.</para>
+                15) is used.</para>
               </listitem>
             </varlistentry>
 
@@ -366,7 +369,7 @@
                 (":") and a <replaceable>priority</replaceable>. This priority
                 determines the order in which filter rules are processed
                 during packet classification. If not specified, the value
-                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 20)
+                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 10)
                 is used.</para>
 
                 <note>

Shorewall6/manpages/shorewall6.conf.xml

@@ -623,15 +623,38 @@
 
       <varlistentry>
         <term><emphasis role="bold">DYNAMIC_BLACKLIST=</emphasis>{<emphasis
-        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>
+        role="bold">Yes</emphasis>|<emphasis
+        role="bold">No</emphasis>||<emphasis
+        role="bold">ipset</emphasis>[<emphasis
+        role="bold">-only</emphasis>][,<emphasis
+        role="bold">src-dst</emphasis>][:[<replaceable>setname</replaceable>][:<replaceable>log_level</replaceable>|:l<replaceable>og_tag</replaceable>]]]}</term>
 
         <listitem>
           <para>Added in Shorewall 4.4.7. When set to <emphasis
           role="bold">No</emphasis> or <emphasis role="bold">no</emphasis>,
-          dynamic blacklisting using the <command>shorewall6 drop</command>,
-          <command>shorewall6 reject</command>, <command>shorewall6
-          logdrop</command> and <command>shorewall6 logreject</command> is
-          disabled. Default is <emphasis role="bold">Yes</emphasis>.</para>
+          chain-based dynamic blacklisting using the <command>shorewall6
+          drop</command>, <command>shorewall6 reject</command>,
+          <command>shorewall6 logdrop</command> and <command>shorewall6
+          logreject</command> is disabled. Default is <emphasis
+          role="bold">Yes</emphasis>. Beginning with Shorewall 5.0.8,
+          ipset-based dynamic blacklisting is also supported. The name of the
+          set (<replaceable>setname</replaceable>) and the level
+          (<replaceable>log_level</replaceable>), if any, at which blacklisted
+          traffic is to be logged may also be specified. The default set name
+          is SW_DBL6 and the default log level is <option>none</option> (no
+          logging). if <option>ipset-only</option> is given, then chain-based
+          dynamic blacklisting is disabled just as if DYNAMIC_BLACKLISTING=No
+          had been specified. Normally, only packets whose source address
+          matches an entry in the ipsec are dropped. If
+          <option>src-dst</option> is included, then packets whose destination
+          address matches an entry in the ipset are also dropped.</para>
+
+          <para>When ipset-based dynamic blacklisting is enabled, the contents
+          of the blacklist will be preserved over
+          <command>stop</command>/<command>reboot</command>/<command>start</command>
+          sequences if SAVE_IPSETS=Yes or if
+          <replaceable>setname</replaceable> is included in the list of sets
+          to be saved in SAVE_IPSETS.</para>
         </listitem>
       </varlistentry>
 
@@ -686,7 +709,8 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
           packets until these packets reach the chain in which the original
           connection was accepted. So for packets going from the 'loc' zone to
           the 'net' zone, ESTABLISHED/RELATED packets are ACCEPTED in the
-          'loc2net' chain.</para>
+          'loc-net' or 'loc2net' chain, depending on the setting of ZONE2ZONE
+          (see below).</para>
 
           <para>If you set FASTACCEPT=Yes, then ESTABLISHED/RELATED packets
           are accepted early in the INPUT, FORWARD and OUTPUT chains. If you
@@ -2115,11 +2139,13 @@ INLINE          -       -       -       ; -j REJECT
         role="bold">STARTUP_LOG=</emphasis>[<emphasis>pathname</emphasis>]</term>
 
         <listitem>
-          <para>If specified, determines where Shorewall6 will log the details
+          <para>If specified, determines where Shorewall will log the details
           of each <emphasis role="bold">start</emphasis>, <emphasis
           role="bold">reload</emphasis>, <emphasis
-          role="bold">restart</emphasis> and <emphasis
-          role="bold">refresh</emphasis> command. Logging verbosity is
+          role="bold">restart</emphasis>, <emphasis
+          role="bold">refresh</emphasis>, <emphasis
+          role="bold">try</emphasis>, and <emphasis
+          role="bold">safe-</emphasis>* command. Logging verbosity is
           determined by the setting of LOG_VERBOSITY above.</para>
         </listitem>
       </varlistentry>
@@ -2480,6 +2506,20 @@ INLINE          -       -       -       ; -j REJECT
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">VERBOSE_MESSAGES=</emphasis>[<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.9. When Yes (the default), messages
+          produced by the ?INFO and ?WARNING directives include the filename
+          and linenumber of the directive. When set to No, that additional
+          information is omitted. The setting may be overridden on a directive
+          by directive basis by following ?INFO or ?WARNING with '!' (no
+          intervening white space).</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis
         role="bold">VERBOSITY=</emphasis>[<emphasis>number</emphasis>]</term>

Shorewall6/manpages/shorewall6.xml

@@ -48,6 +48,19 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall6</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>blacklist</option></arg>
+
+      <arg choice="plain"><replaceable>address</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall6</command>
 
@@ -919,7 +932,28 @@
           blacklisted by a <emphasis role="bold">drop</emphasis>, <emphasis
           role="bold">logdrop</emphasis>, <emphasis
           role="bold">reject</emphasis>, or <emphasis
-          role="bold">logreject</emphasis> command.</para>
+          role="bold">logreject</emphasis> command. Beginning with Shorewall
+          5.0.10, this command can also re-enable addresses blacklisted using
+          the <command>blacklist</command> command.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">blacklist</emphasis>
+        <replaceable>address</replaceable> [ <replaceable>option</replaceable>
+        ... ]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8 and requires
+          DYNAMIC_BLACKLIST=ipset.. in <ulink
+          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5).
+          Causes packets from the given host or network
+          <replaceable>address</replaceable> to be dropped, based on the
+          setting of BLACKLIST in <ulink
+          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5).
+          The <replaceable>address</replaceable> along with any
+          <replaceable>option</replaceable>s are passed to the <command>ipset
+          add</command> command.</para>
         </listitem>
       </varlistentry>
 
@@ -2469,6 +2503,34 @@
     started.</para>
   </refsect1>
 
+  <refsect1>
+    <title>ENVIRONMENT</title>
+
+    <para>Two environmental variables are recognized by Shorewall6:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term>SHOREWALL_INIT_SCRIPT</term>
+
+        <listitem>
+          <para>When set to 1, causes Std out to be redirected to the file
+          specified in the STARTUP_LOG option in <ulink
+          url="shorewall6.conf.html">shorewall6.conf(5)</ulink>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>SW_LOGGERTAG</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8. When set to a non-empty value, that
+          value is passed to the logger utility in its -t (--tag)
+          option.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
   <refsect1>
     <title>See ALSO</title>
 

docs/Documentation_Index.xml

@@ -74,7 +74,7 @@
   <section>
     <title>Documentation for Earlier Versions</title>
 
-    <para><ulink url="4.2/Documentation_Index.html">Shorewall 4.4/4.6
+    <para><ulink url="4.6/Documentation_Index.html">Shorewall 4.4/4.6
     Documentation</ulink></para>
 
     <para><ulink url="4.2/Documentation_Index.html">Shorewall 4.0/4.2

docs/Dynamic.xml

@@ -95,6 +95,11 @@ rsyncok     eth1:<emphasis role="bold">dynamic</emphasis></programlisting>
       <para>When the <emphasis role="bold">dynamic_shared</emphasis> option is
       specified, a single ipset is created; the ipset has the same name as the
       zone.</para>
+
+      <para>In the above example, <emphasis role="bold">rsyncok</emphasis> is
+      a sub-zone of the single zone <emphasis role="bold">loc</emphasis>.
+      Making a dynamic zone a sub-zone of multiple other zones is also
+      supported.</para>
     </section>
 
     <section id="Adding">

docs/Events.xml

@@ -204,7 +204,7 @@
             <para>If the <replaceable>action</replaceable> involves logging,
             then this parameter specifies the disposition that will appear in
             the log entry prefix. If no <replaceable>disposition</replaceable>
-            is given, the log prefix is determines normally. The default is
+            is given, the log prefix is determined normally. The default is
             ACCEPT.</para>
           </listitem>
         </varlistentry>
@@ -258,7 +258,7 @@
             <para>If the <replaceable>action</replaceable> involves logging,
             then this parameter specifies the disposition that will appear in
             the log entry prefix. If no <replaceable>disposition</replaceable>
-            is given, the log prefix is determines normally.</para>
+            is given, the log prefix is determined normally.</para>
           </listitem>
         </varlistentry>
       </variablelist>
@@ -404,7 +404,7 @@
             <para>If the <replaceable>action</replaceable> involves logging,
             then this parameter specifies the disposition that will appear in
             the log entry prefix. If no <replaceable>disposition</replaceable>
-            is given, the log prefix is determines normally.</para>
+            is given, the log prefix is determined normally.</para>
           </listitem>
         </varlistentry>
       </variablelist>

docs/Shorewall-5.xml

@@ -301,8 +301,8 @@
 
       <para>COMMENT, FORMAT and SECTION Lines now require the leading question
       mark ("?"). In earlier releases, the question mark was optional. The
-      <command>shorewall[6] update -D</command> command will insert the
-      question marks for you.</para>
+      <command>shorewall[6] update -D</command> command in Shorewall 4.6 will
+      insert the question marks for you.</para>
     </section>
   </section>
 
@@ -359,7 +359,7 @@
 
     <para>It is strongly recommended that you first upgrade your installation
     to a 4.6 release that supports the <option>-A</option> option to the
-    <command>update</command> command; 4.6.13 is preferred.</para>
+    <command>update</command> command; 4.6.13.2 or later is preferred.</para>
 
     <para>Once you are on that release, execute the <command>shorewall update
     -A</command> command (and <command>shorewall6 update -A</command> if you
@@ -374,11 +374,11 @@
     likely won't start or work correctly until you do.</para>
 
     <para>The <command>update</command> command in Shorewall 5 has many fewer
-    options. The <option>-b</option>, <option>-t</option>, <option>-n</option>
-    and <option>-s </option>options have been removed -- the updates triggered
-    by those options are now performed unconditionally. The <option>-i
-    </option>and <option>-A </option>options have been retained - both enable
-    checking for issues that could result if INLINE_MATCHES were to be set to
-    Yes.</para>
+    options. The <option>-b</option>, <option>-t</option>,
+    <option>-n</option>, <option>-D</option> and <option>-s </option>options
+    have been removed -- the updates triggered by those options are now
+    performed unconditionally. The <option>-i </option>and <option>-A
+    </option>options have been retained - both enable checking for issues that
+    could result if INLINE_MATCHES were to be set to Yes.</para>
   </section>
 </article>

docs/blacklisting_support.xml

@@ -48,7 +48,7 @@
   <section id="Intro">
     <title>Introduction</title>
 
-    <para>Shorewall supports two different types of blackliisting; rule-based,
+    <para>Shorewall supports two different types of blacklisting; rule-based,
     static and dynamic. The BLACKLIST option in /etc/shorewall/shorewall.conf
     controls the degree of blacklist filtering.</para>
 

docs/configuration_file_basics.xml

@@ -18,7 +18,7 @@
     <pubdate><?dbtimestamp format="Y/m/d"?></pubdate>
 
     <copyright>
-      <year>2001-2013</year>
+      <year>2001-2016</year>
 
       <holder>Thomas M. Eastep</holder>
     </copyright>
@@ -35,9 +35,9 @@
   </articleinfo>
 
   <caution>
-    <para><emphasis role="bold">This article applies to Shorewall 4.3 and
+    <para><emphasis role="bold">This article applies to Shorewall 5.0 and
     later. If you are running a version of Shorewall earlier than Shorewall
-    4.3.5 then please see the documentation for that
+    5.0.0 then please see the documentation for that
     release.</emphasis></para>
   </caution>
 
@@ -1739,7 +1739,7 @@ SSH(ACCEPT)    net:$MYIP      $FW
 
       <listitem>
         <para><ulink
-        url="manpages/shorewall-accounting.html">shorewall-blacklist</ulink>
+        url="manpages/shorewall-blrules.html">shorewall-blrules</ulink>
         (5)</para>
       </listitem>
 
@@ -1747,6 +1747,12 @@ SSH(ACCEPT)    net:$MYIP      $FW
         <para><ulink url="Macros.html">Macro</ulink> files</para>
       </listitem>
 
+      <listitem>
+        <para><ulink
+        url="manpages/shorewall-mangle.html">shorewall-mangle</ulink>
+        (5)</para>
+      </listitem>
+
       <listitem>
         <para><ulink
         url="manpages/shorewall-nat.html">shorewall-nat</ulink>(5)</para>
@@ -1756,17 +1762,6 @@ SSH(ACCEPT)    net:$MYIP      $FW
         <para><ulink
         url="manpages/shorewall-rules.html">shorewall-rules</ulink> (5)</para>
       </listitem>
-
-      <listitem>
-        <para><ulink
-        url="manpages/shorewall-tcrules.html">shorewall-tcrules</ulink>
-        (5)</para>
-      </listitem>
-
-      <listitem>
-        <para><ulink url="manpages/shorewall-tos.html">shorewall-tos</ulink>
-        (5)</para>
-      </listitem>
     </itemizedlist>
 
     <para>They may also appear in the ORIGDEST column of:</para>
@@ -1830,7 +1825,7 @@ SSH(ACCEPT)    net:$MYIP      $FW
 
       <listitem>
         <para><ulink
-        url="manpages/shorewall-accounting.html">shorewall-blacklist</ulink>
+        url="manpages/shorewall-blrules.html">shorewall-blrules</ulink>
         (5)</para>
       </listitem>
 
@@ -1838,6 +1833,12 @@ SSH(ACCEPT)    net:$MYIP      $FW
         <para><ulink url="Macros.html">Macro</ulink> files</para>
       </listitem>
 
+      <listitem>
+        <para><ulink
+        url="manpages/shorewall-mangle.html">shorewall-mangle</ulink>
+        (5)</para>
+      </listitem>
+
       <listitem>
         <para><ulink
         url="manpages/shorewall-nat.html">shorewall-nat</ulink>(5) (As a
@@ -1846,18 +1847,13 @@ SSH(ACCEPT)    net:$MYIP      $FW
 
       <listitem>
         <para><ulink
-        url="manpages/shorewall-rules.html">shorewall-rules</ulink> (5)</para>
+        url="manpages/shorewall-routes.html">shorewall-routes</ulink>
+        (5)</para>
       </listitem>
 
       <listitem>
         <para><ulink
-        url="manpages/shorewall-tcrules.html">shorewall-tcrules</ulink>
-        (5)</para>
-      </listitem>
-
-      <listitem>
-        <para><ulink url="manpages/shorewall-tos.html">shorewall-tos</ulink>
-        (5)</para>
+        url="manpages/shorewall-rules.html">shorewall-rules</ulink> (5)</para>
       </listitem>
     </itemizedlist>
 
@@ -2227,6 +2223,20 @@ SSH(ACCEPT)    net:$MYIP      $FW
 
     <programlisting>   ERROR: Invalid value for Bricks (2000) /usr/share/shorewall/action.GlusterFS (line 15)
       from /etc/shorewall/rules (line 45)</programlisting>
+
+    <para>In Shorewall 5.0.8, ?WARNING and ?INFO directives were added.</para>
+
+    <programlisting>?WARNING <replaceable>message</replaceable>
+?INFO <replaceable>message</replaceable></programlisting>
+
+    <para>?WARNING message produces a standard Shorewall WARNING: message,
+    while ?INFO produces a similar message which is prefaced by INFO: rather
+    than WARNING:. Both write the message to STDERR. The message is also
+    written to the STARTUP_LOG, if any, provided that the command is
+    <command>start</command>, <command>try</command>,
+    <command>restart</command>, <command>reload</command>,
+    <command>refresh</command>, or one of the <command>safe</command>-*
+    commands.</para>
   </section>
 
   <section id="Embedded">

docs/dhcp.xml

@@ -109,8 +109,8 @@
 
       <listitem>
         <para>In the event that the subnet address might change while
-        Shorewall is started, you need to arrange for a <quote>shorewall
-        refresh</quote> command to be executed when a new dynamic IP address
+        Shorewall is started, you need to arrange for a <command>shorewall
+        reload</command> command to be executed when a new dynamic IP address
         gets assigned to the interface. Check your DHCP client's
         documentation.</para>
       </listitem>

docs/shorewall_logging.xml

@@ -293,7 +293,7 @@ gateway:/etc/shorewall#                                               </programl
 
       <itemizedlist>
         <listitem>
-          <para>The first number specifies the netlink group (0-32). If
+          <para>The first number specifies the netlink group (0-65535). If
           omitted (e.g., NFLOG(,0,10)) then a value of 0 is assumed.</para>
         </listitem>