Revert "Allow leading 's' & 'd' to be omitted when specifying two rates"

This reverts commit 23bc6f1ab5.

Shorewall-core/configure

@@ -1,8 +1,8 @@
 #!/bin/bash
 #
-#     Shorewall Packet Filtering Firewall RPM configuration program - V4.6
+#     Shorewall Packet Filtering Firewall configuration program - V5.2
 #
-#     (c) 2012,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2012,2014,2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	Shorewall documentation is available at http://www.shorewall.net
 #
@@ -109,6 +109,9 @@ if [ -z "$vendor" ]; then
 	    opensuse)
 		vendor=suse
 		;;
+	    alt|basealt|altlinux)
+		vendor=alt
+		;;
 	    *)
 		vendor="$ID"
 		;;
@@ -132,6 +135,8 @@ if [ -z "$vendor" ]; then
 	    if [ -f /etc/debian_version ]; then
 		params[HOST]=debian
 		ls -l /sbin/init | fgrep -q systemd &&  rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
+	    elif [ -f /etc/altlinux-release ] ; then
+		params[HOST]=alt
 	    elif [ -f /etc/redhat-release ]; then
 		params[HOST]=redhat
 		rcfile=shorewallrc.redhat

Shorewall-core/configure.pl

@@ -1,6 +1,6 @@
 #! /usr/bin/perl -w
 #
-#     Shorewall Packet Filtering Firewall RPM configuration program - V4.5
+#     Shorewall Packet Filtering Firewall configuration program - V5.2
 #
 #     (c) 2012, 2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -74,6 +74,8 @@ unless ( defined $vendor ) {
 	} elsif ( $id eq 'ubuntu' || $id eq 'debian' ) {
 	    my $init = `ls -l /sbin/init`;
 	    $vendor = $init =~ /systemd/ ? 'debian.systemd' : 'debian.sysvinit';
+	} elsif ( $id eq 'alt' || $id eq 'basealt' || $id eq 'altlinux' ) {
+	    $vendor = 'alt';
 	} else {
 	    $vendor = $id;
 	}
@@ -117,6 +119,9 @@ if ( defined $vendor ) {
 	} else {
 	    $rcfilename = 'shorewallrc.debian.sysvinit';
 	}
+    } elsif ( -f '/etc/altlinux-release' ){
+	$vendor = 'alt';
+	$rcfilename = 'shorewallrc.alt';
     } elsif ( -f '/etc/redhat-release' ){
 	$vendor = 'redhat';
 	$rcfilename = 'shorewallrc.redhat';

Shorewall-core/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Core Modules
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2018 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -172,6 +172,9 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
+		    alt|basealt|altlinux)
+			BUILD=alt
+			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -180,6 +183,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
+	    elif [ -f /etc/altlinux-release ]; then
+		BUILD=alt
 	    elif [ -f /etc/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f /etc/slackware-version ] ; then
@@ -238,7 +243,7 @@ case "$HOST" in
     apple)
 	echo "Installing Mac-specific configuration...";
 	;;
-    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
+    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt|alt)
 	;;
     *)
 	fatal_error "Unknown HOST \"$HOST\""

Shorewall-core/lib.base

@@ -1,5 +1,5 @@
 #
-# Shorewall 5.1 -- /usr/share/shorewall/lib.base
+# Shorewall 5.2 -- /usr/share/shorewall/lib.base
 #
 #     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-core/lib.cli

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.cli.
+# Shorewall 5.2 -- /usr/share/shorewall/lib.cli
 #
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2018 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -25,7 +25,7 @@
 # loaded after this one and replaces some of the functions declared here.
 #
 
-SHOREWALL_CAPVERSION=50106
+SHOREWALL_CAPVERSION=50200
 
 if [ -z "$g_basedir" ]; then
     #
@@ -47,6 +47,10 @@ startup_error() {
     exit 1
 }
 
+only_root() {
+    [ "$(id -u)" != 0 ] && fatal_error "The '$COMMAND' command may only be run by root"
+}
+
 #
 # Display a chain if it exists
 #
@@ -83,6 +87,8 @@ showchain() # $1 = name of chain
 #
 validate_restorefile() # $* = label
 {
+    [ -n "$RESTOREFILE" ] || RESTOREFILE=restore
+
     case $RESTOREFILE in
 	*/*)
 	    error_message "ERROR: $@ must specify a simple file name: $RESTOREFILE"
@@ -411,9 +417,9 @@ resolve_arptables() {
 savesets() {
     local supported
 
-    supported=$(run_it ${VARDIR}/firewall help | fgrep savesets )
+    supported=$(run_it $g_firewall help | fgrep savesets )
 
-    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${g_restorepath}-ipsets 
+    [ -n "$supported" ] && run_it $g_firewall savesets ${g_restorepath}-ipsets 
 }
 
 #
@@ -422,9 +428,9 @@ savesets() {
 savesets1() {
     local supported
 
-    supported=$(run_it ${VARDIR}/firewall help | fgrep savesets )
+    supported=$(run_it $g_firewall help | fgrep savesets )
 
-    [ -n "$supported" ] && run_it ${VARDIR}/firewall savesets ${VARDIR}/ipsets.save && progress_message3 "The ipsets have been saved to ${VARDIR}/ipsets.save"
+    [ -n "$supported" ] && run_it $g_firewall savesets ${VARDIR}/ipsets.save && progress_message3 "The ipsets have been saved to ${VARDIR}/ipsets.save"
 }
 
 #
@@ -435,9 +441,9 @@ do_save() {
     local arptables
     status=0
 
-    if [ -f ${VARDIR}/firewall ]; then
+    if [ -f $g_firewall ]; then
 	if $iptables_save | grep -v -- '-A dynamic.* -j ACCEPT' > ${VARDIR}/restore-$$; then
-	    cp -f ${VARDIR}/firewall $g_restorepath
+	    cp -f $g_firewall $g_restorepath
 	    mv -f ${VARDIR}/restore-$$ ${g_restorepath}-iptables
 	    chmod 700 $g_restorepath
 	    chmod 600 ${g_restorepath}-iptables
@@ -449,7 +455,7 @@ do_save() {
 	    status=1
 	fi
     else
-	echo "   ERROR: ${VARDIR}/firewall does not exist" >&2
+	echo "   ERROR: $g_firewall does not exist" >&2
 	status=1
     fi
 
@@ -634,7 +640,7 @@ show_routing() {
 	ip -$g_family rule list | find_tables | sort -u | while read table; do
 	    heading "Table $table:"
 	    if [ $g_family -eq 6 ]; then
-		ip -$g_family -o route list table $table | grep -vF cache | sort_routes
+		ip -6 -o route list table $table | grep -vF cache | sort_routes
 	    else
 		ip -4 -o route list table $table | sort_routes
 	    fi
@@ -647,7 +653,7 @@ show_routing() {
     else
 	heading "Routing Table"
 	if [ $g_family -eq 6 ]; then
-	    ip -$g_family -o route list | grep -vF cache | sort_routes
+	    ip -6 -o route list | grep -vF cache | sort_routes
 	else
 	    ip -4 -o route list table $table | sort_routes
 	fi
@@ -1185,6 +1191,32 @@ show_ipsec_command() {
     show_ipsec
 }
 
+show_saves_command() {
+    local f
+    local fn
+    local mtime
+
+    echo "$g_product $SHOREWALL_VERSION Saves at $g_hostname - $(date)"
+    echo "Saved snapshots are:"
+    echo
+
+    for f in ${VARDIR}/*-iptables; do
+	case $f in
+	    *\**)
+	        ;;
+	    *)
+		fn=$(basename $f)
+		fn=${fn%-iptables}
+		mtime=$(ls -lt $f | tail -n 1 | cut -d ' ' -f '6 7 8' )
+		[ $fn = "$RESTOREFILE" ] && fn="$fn (default)"
+		echo "   $mtime ${fn%-iptables}"
+		;;
+	esac
+    done
+
+    echo
+}
+
 #
 # Show Command Executor
 #
@@ -1203,6 +1235,7 @@ show_command() {
     show_macro() {
 	foo=`grep 'This macro' $macro | sed 's/This macro //'`
 	if [ -n "$foo" ]; then
+	    macro=$(basename $macro)
 	    macro=${macro#*.}
 	    foo=${foo%.*}
 	    if [ ${#macro} -gt 5 ]; then
@@ -1297,37 +1330,47 @@ show_command() {
 
     [ -n "$g_debugging" ] && set -x
 
+    COMMAND="$COMMAND $1"
+
     case "$1" in
 	connections)
+	    only_root
 	    eval show_connections $@ $g_pager
 	    ;;
 	nat)
+	    only_root
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_nat $g_pager
 	    ;;
 	raw)
+	    only_root
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_raw $g_pager
 	    ;;
 	tos|mangle)
+	    only_root
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_mangle $g_pager
 	    ;;
 	log)
 	    [ $# -gt 2 ] && too_many_arguments $2
 
+	    only_root
 	    setup_logread
 	    eval show_log $g_pager
 	    ;;
 	tc)
+	    only_root
 	    [ $# -gt 2 ] && too_many_arguments $2
 	    eval show_tc $@ $g_pager
 	    ;;
 	classifiers|filters)
+	    only_root
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_classifiers_command $g_pager
 	    ;;
 	zones)
+	    only_root
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    if [ -f ${VARDIR}/zones ]; then
 		echo "$g_product $SHOREWALL_VERSION Zones at $g_hostname - $(date)"
@@ -1351,6 +1394,7 @@ show_command() {
 	    fi
 	    ;;
 	capabilities)
+	    only_root
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    determine_capabilities
 	    VERBOSITY=2
@@ -1387,33 +1431,50 @@ show_command() {
 	    fi
 	    ;;
 	chain)
+	    only_root
 	    shift
 	    eval show_chain $@ $g_pager
 	    ;;
 	vardir)
 	    echo $VARDIR;
 	    ;;
+        rc)
+            shift
+	    [ $# -gt 1 ] && too_many_arguments $2
+            if [ -n "$1" -a -d "$1" ]; then
+                cat $1/shorewallrc
+            elif [ -n "$g_basedir" -a -d "$g_basedir" ]; then
+                cat $g_basedir/shorewallrc
+            else
+                fatal_error "Can not determine the location of the shorewallrc file."
+            fi
+            ;;
 	policies)
+	    only_root
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_policies $g_pager
 	    ;;
 	ipa)
+	    only_root
 	    [ $g_family -eq 4 ] || fatal_error "'show ipa' is now available in $g_product"
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_ipa $g_pager
 	    ;;
 	marks)
 	    [ $# -gt 1 ] && too_many_arguments $2
+	    only_root
 	    echo "$g_product $SHOREWALL_VERSION Mark Layout at $g_hostname - $(date)"
 	    echo
 	    [ -f ${VARDIR}/marks ] && cat ${VARDIR}/marks;
 	    ;;
 	nfacct)
 	    [ $# -gt 1 ] && too_many_arguments $2
+	    only_root
 	    eval show_nfacct_command $g_pager
 	    ;;
 	arptables)
 	    [ $# -gt 1 ] && too_many_arguments $2
+	    only_root
 	    resolve_arptables
 	    if [ -n "$arptables" -a -x $arptables ]; then
 		eval show_arptables $g_pager
@@ -1423,6 +1484,7 @@ show_command() {
 	    ;;
 	event)
 	    [ $# -gt 1 ] || too_many_arguments $2
+	    only_root
 	    echo "$g_product $SHOREWALL_VERSION events at $g_hostname - $(date)"
 	    echo
 	    shift
@@ -1430,14 +1492,18 @@ show_command() {
 	    ;;
 	events)
 	    [ $# -gt 1 ] && too_many_arguments $2
+	    only_root
 	    eval show_events_command $g_pager
 	    ;;
 	bl|blacklists)
 	    [ $# -gt 1 ] && too_many_arguments $2
+	    only_root
+	    setup_dbl
 	    eval show_blacklists $g_pager
 	    ;;
 	opens)
 	    [ $# -gt 1 ] && too_many_arguments $2
+	    only_root
 	    echo "$g_product $SHOREWALL_VERSION Temporarily opened connections at $g_hostname - $(date)"
 
 	    if chain_exists dynamic; then
@@ -1448,8 +1514,13 @@ show_command() {
 	    ;;
 	ipsec)
 	    [ $# -gt 1 ] && too_many_arguments $2
+	    only_root
 	    eval show_ipsec_command $g_pager
 	    ;;
+	saves)
+	    [ $# -gt 1 ] && too_many_arguments $2
+	    show_saves_command
+	    ;;
 	*)
 	    case "$PRODUCT" in
 		*-lite)
@@ -1496,6 +1567,8 @@ show_command() {
 		    ;;
 	    esac
 
+	    only_root
+
 	    if [ $# -gt 0 ]; then
 		if [ $1 = dynamic -a $# -gt 1 ]; then
 		    shift
@@ -1927,41 +2000,6 @@ show_proc() # $1 = name of a file
     [ -f $1 ] && echo "   $1 = $(cat $1)"
 }
 
-read_yesno_with_timeout() {
-    local timeout
-    timeout=${1:-60}
-
-    case $timeout in
-	*s)
-	    ;;
-	*m)
-	    timeout=$((${timeout%m} * 60))
-	    ;;
-	*h)
-	    timeout=$((${timeout%h} * 3600))
-	    ;;
-    esac
-
-    read -t $timeout yn 2> /dev/null
-    if [ $? -eq 2 ]
-    then
-	# read doesn't support timeout
-	test -x /bin/bash || return 2 # bash is not installed so the feature is not available
-	/bin/bash -c "read -t $timeout yn ; if [ \"\$yn\" == \"y\" ] ; then exit 0 ; else exit 1 ; fi" # invoke bash and use its version of read
-	return $?
-    else
-	# read supports timeout
-	case "$yn" in
-	    y|Y)
-		return 0
-		;;
-	    *)
-		return 1
-		;;
-	esac
-    fi
-}
-
 #
 # Create the appropriate -q option to pass onward
 #
@@ -2545,109 +2583,114 @@ hits_command() {
     fi
 }
 
+#
+# Issue an error message and terminate if the firewall isn't started
+#
+require_started() {
+    if ! product_is_started; then
+	error_message "ERROR: $g_product is not started"
+	exit 2
+    fi
+}
+
 #
 # 'allow' command executor
 #
 allow_command() {
 
+    local allowed
+    local which
+    which='-s'
+    local range
+    range='--src-range'
+    local dynexists
+
     [ -n "$g_debugging" ] && set -x
     [ $# -eq 1 ] && missing_argument
 
-    if product_is_started ; then
-	local allowed
-	local which
-	which='-s'
-	local range
-	range='--src-range'
-	local dynexists
-
-	if [ -n "$g_blacklistipset" ]; then
-
-	    case ${IPSET:=ipset} in
-		*/*)
-		    if [ ! -x "$IPSET" ]; then
-			fatal_error "IPSET=$IPSET does not exist or is not executable"
-		    fi
-		    ;;
-		*)
-		    IPSET="$(mywhich $IPSET)"
-		    [ -n "$IPSET" ] || fatal_error "The ipset utility cannot be located"
-		    ;;
-	    esac
-	fi
-
-	if chain_exists dynamic; then
-	    dynexists=Yes
-	elif [ -z "$g_blacklistipset" ]; then
-	    fatal_error "Dynamic blacklisting is not enabled in the current $g_product configuration"
-	fi
-
-	[ -n "$g_nolock" ] || mutex_on
-
-	while [ $# -gt 1 ]; do
-	    shift
-
-	    allowed=''
-
-	    case $1 in
-		from)
-		    which='-s'
-		    range='--src-range'
-		    continue
-		    ;;
-		to)
-		    which='-d'
-		    range='--dst-range'
-		    continue
-		    ;;
-		*-*)
-		    if [ -n "$g_blacklistipset" ]; then
-			if qt $IPSET -D $g_blacklistipset $1; then
-			    allowed=Yes
-			fi
-		    fi
-
-		    if [ -n "$dynexists" ]; then
-			if  qt $g_tool -D dynamic -m iprange $range $1 -j reject    ||\
-			    qt $g_tool -D dynamic -m iprange $range $1 -j DROP      ||\
-			    qt $g_tool -D dynamic -m iprange $range $1 -j logdrop   ||\
-			    qt $g_tool -D dynamic -m iprange $range $1 -j logreject
-			then
-			    allowed=Yes
-			fi
-		    fi
-		    ;;
-		*)
-		    if [ -n "$g_blacklistipset" ]; then
-			if qt $IPSET -D $g_blacklistipset $1; then
-			    allowed=Yes
-			fi
-		    fi
-
-		    if [ -n "$dynexists" ]; then
-			if  qt $g_tool -D dynamic $which $1 -j reject    ||\
-			    qt $g_tool -D dynamic $which $1 -j DROP      ||\
-			    qt $g_tool -D dynamic $which $1 -j logdrop   ||\
-			    qt $g_tool -D dynamic $which $1 -j logreject
-			then
-			    allowed=Yes
-			fi
-		    fi
-		    ;;
-	    esac
-
-	    if [ -n "$allowed" ]; then
-		progress_message2 "$1 Allowed"
-	    else
-		error_message "WARNING: $1 already allowed (not dynamically blacklisted)"
-	    fi
-	done
-
-	[ -n "$g_nolock" ] || mutex_off
-    else
-	error_message "ERROR: $g_product is not started"
-	exit 2
+    if [ -n "$g_blacklistipset" ]; then
+	case ${IPSET:=ipset} in
+	    */*)
+		if [ ! -x "$IPSET" ]; then
+		    fatal_error "IPSET=$IPSET does not exist or is not executable"
+		fi
+		;;
+	    *)
+		IPSET="$(mywhich $IPSET)"
+		[ -n "$IPSET" ] || fatal_error "The ipset utility cannot be located"
+		;;
+	esac
     fi
+
+    if chain_exists dynamic; then
+	dynexists=Yes
+    elif [ -z "$g_blacklistipset" ]; then
+	require_started
+	fatal_error "Dynamic blacklisting is not enabled in the current $g_product configuration"
+    fi
+
+    [ -n "$g_nolock" ] || mutex_on
+
+    while [ $# -gt 1 ]; do
+	shift
+
+	allowed=''
+
+	case $1 in
+	    from)
+		which='-s'
+		range='--src-range'
+		continue
+		;;
+	    to)
+		which='-d'
+		range='--dst-range'
+		continue
+		;;
+	    *-*)
+		if [ -n "$g_blacklistipset" ]; then
+		    if qt $IPSET -D $g_blacklistipset $1; then
+			allowed=Yes
+		    fi
+		fi
+
+		if [ -n "$dynexists" ]; then
+		    if  qt $g_tool -D dynamic -m iprange $range $1 -j reject    ||\
+			qt $g_tool -D dynamic -m iprange $range $1 -j DROP      ||\
+			qt $g_tool -D dynamic -m iprange $range $1 -j logdrop   ||\
+			qt $g_tool -D dynamic -m iprange $range $1 -j logreject
+		    then
+			allowed=Yes
+		    fi
+		fi
+		;;
+	    *)
+		if [ -n "$g_blacklistipset" ]; then
+		    if qt $IPSET -D $g_blacklistipset $1; then
+			allowed=Yes
+		    fi
+		fi
+
+		if [ -n "$dynexists" ]; then
+		    if  qt $g_tool -D dynamic $which $1 -j reject    ||\
+		        qt $g_tool -D dynamic $which $1 -j DROP      ||\
+			qt $g_tool -D dynamic $which $1 -j logdrop   ||\
+			qt $g_tool -D dynamic $which $1 -j logreject
+		    then
+			allowed=Yes
+		    fi
+		fi
+		;;
+	esac
+
+	if [ -n "$allowed" ]; then
+	    progress_message2 "$1 Allowed"
+	else
+	    error_message "WARNING: $1 already allowed (not dynamically blacklisted)"
+	fi
+    done
+
+    [ -n "$g_nolock" ] || mutex_off
 }
 
 #
@@ -2723,7 +2766,7 @@ determine_capabilities() {
 	g_tool=$(mywhich $tool)
 
 	if [ -z "$g_tool" ]; then
-	    fatal-error "No executable $tool binary can be found on your PATH"
+	    fatal_error "No executable $tool binary can be found on your PATH"
 	fi
     fi
 
@@ -2767,7 +2810,6 @@ determine_capabilities() {
     LENGTH_MATCH=
     CLASSIFY_TARGET=
     ENHANCED_REJECT=
-    USEPKTTYPE=
     KLUDGEFREE=
     MARK=
     XMARK=
@@ -2863,6 +2905,7 @@ determine_capabilities() {
 		qt $g_tool -t nat -A $chain -j NETMAP --to 2001:470:B:227::/64 && NETMAP_TARGET=Yes
 	    fi
 	    qt $g_tool -t nat -A $chain -j MASQUERADE && MASQUERADE_TGT=Yes
+	    qt $g_tool -t nat -L INPUT -n && NAT_INPUT_CHAIN=Yes
 	    qt $g_tool -t nat -A $chain -p udplite -m multiport --dport 33 -j REDIRECT --to-port 22 && UDPREDIRECT=Yes
 	    qt $g_tool -t nat -F $chain
 	    qt $g_tool -t nat -X $chain
@@ -3113,7 +3156,6 @@ determine_capabilities() {
 	fi
     fi
 
-    qt $g_tool -A $chain -m pkttype --pkt-type broadcast -j ACCEPT && USEPKTTYPE=Yes
     qt $g_tool -A $chain -m addrtype --src-type BROADCAST -j ACCEPT && ADDRTYPE=Yes
     qt $g_tool -A $chain -p tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1000:1500 -j ACCEPT && TCPMSS_MATCH=Yes
     qt $g_tool -A $chain -m hashlimit --hashlimit-upto 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && HASHLIMIT_MATCH=Yes
@@ -3227,7 +3269,6 @@ report_capabilities_unsorted() {
 	report_capability "Extended Connection Tracking Match Support (NEW_CONNTRACK_MATCH)" $NEW_CONNTRACK_MATCH
 	[ -n "$OLD_CONNTRACK_MATCH" ] && report_capability "Old Connection Tracking Match Syntax (OLD_CONNTRACK_MATCH)" $OLD_CONNTRACK_MATCH
     fi
-    report_capability "Packet Type Match (USEPKTTYPE)" $USEPKTTYPE
     report_capability "Policy Match (POLICY_MATCH)" $POLICY_MATCH
     report_capability "Physdev Match (PHYSDEV_MATCH)" $PHYSDEV_MATCH
     report_capability "Physdev-is-bridged Support (PHYSDEV_BRIDGE)" $PHYSDEV_BRIDGE
@@ -3237,8 +3278,8 @@ report_capabilities_unsorted() {
     [ -n "$RECENT_MATCH" ] && report_capability 'Recent Match "--reap" option (REAP_OPTION)' $REAP_OPTION
     report_capability "Owner Match (OWNER_MATCH)" $OWNER_MATCH
     report_capability "Owner Name Match (OWNER_NAME_MATCH)" $OWNER_NAME_MATCH
+    report_capability "Ipset Match (IPSET_MATCH)" $IPSET_MATCH
     if [ -n "$IPSET_MATCH" ]; then
-	report_capability "Ipset Match (IPSET_MATCH)" $IPSET_MATCH
 	[ -n "$OLD_IPSET_MATCH" ]     && report_capability "OLD_Ipset Match (OLD_IPSET_MATCH)"           $OLD_IPSET_MATCH
 	[ -n "$IPSET_MATCH_NOMATCH" ] && report_capability "Ipset Match Nomatch (IPSET_MATCH_NOMATCH)"   $IPSET_MATCH_NOMATCH
 	[ -n "$IPSET_MATCH_NOMATCH" ] && report_capability "Ipset Match Counters (IPSET_MATCH_COUNTERS)" $IPSET_MATCH_COUNTERS
@@ -3331,6 +3372,7 @@ report_capabilities_unsorted() {
     report_capability "NFQUEUE CPU Fanout (CPU_FANOUT)" $CPU_FANOUT
     report_capability "NETMAP Target (NETMAP_TARGET)" $NETMAP_TARGET
     report_capability "--nflog-size support (NFLOG_SIZE)" $NFLOG_SIZE
+    report_capability "INPUT chain in nat table (NAT_INPUT_CHAIN)" $NAT_INPUT_CHAIN
 
     echo "   Kernel Version (KERNELVERSION): $KERNELVERSION"
     echo "   Capabilities Version (CAPVERSION): $CAPVERSION"
@@ -3343,8 +3385,6 @@ report_capabilities() {
 	report_capabilities_unsorted | sort
     fi
 
-    [ -n "$PKTTYPE" ] || USEPKTTYPE=
-
 }
 
 report_capabilities_unsorted1() {
@@ -3361,7 +3401,6 @@ report_capabilities_unsorted1() {
     report_capability1 CONNTRACK_MATCH
     report_capability1 NEW_CONNTRACK_MATCH
     report_capability1 OLD_CONNTRACK_MATCH
-    report_capability1 USEPKTTYPE
     report_capability1 POLICY_MATCH
     report_capability1 PHYSDEV_MATCH
     report_capability1 PHYSDEV_BRIDGE
@@ -3439,6 +3478,7 @@ report_capabilities_unsorted1() {
     report_capability1 NETMAP_TARGET
     report_capability1 NFLOG_SIZE
     report_capability1 RESTORE_WAIT_OPTION
+    report_capability1 NAT_INPUT_CHAIN
 
     report_capability1 AMANDA_HELPER
     report_capability1 FTP_HELPER
@@ -3735,7 +3775,7 @@ ipcalc_command() {
     elif [ $# -eq 3 ]; then
 	address=$2
 	vlsm=$(ip_vlsm $3)
-    elif [ $# -eq 0 ]; then
+    elif [ $# -eq 1 ]; then
 	missing_argument
     else
 	too_many_arguments $4
@@ -3781,7 +3821,7 @@ iprange_command() {
 }
 
 ipdecimal_command() {
-    if [ $# eq 1 ]; then
+    if [ $# -eq 1 ]; then
 	missing_argument
     else
 	[ $# -eq 2 ] || too_many_arguments $3
@@ -3824,7 +3864,7 @@ noiptrace_command() {
 verify_firewall_script() {
     if [ ! -f $g_firewall ]; then
 	echo "   ERROR: $g_product is not properly installed" >&2
-	if [ -L $g_firewall ]; then
+	if [ -h $g_firewall ]; then
 	    echo "          $g_firewall is a symbolic link to a" >&2
 	    echo "          non-existant file" >&2
 	else
@@ -3924,7 +3964,7 @@ get_config() {
 
     ensure_config_path
 
-    [ -f ${VARDIR}/firewall.conf ] && . ${VARDIR}/firewall.conf
+    [ -f $g_firewall.conf ] && . ${VARDIR}/firewall.conf
 
     [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 
@@ -4078,15 +4118,15 @@ start_command() {
 	rc=0
 	[ -n "$g_nolock" ] || mutex_on
 
-	if [ -x ${VARDIR}/firewall ]; then
-	    if [ -n "$g_fast" -a -x ${VARDIR}/${RESTOREFILE} -a ! ${VARDIR}/firewall -nt ${VARDIR}/${RESTOREFILE} ]; then
+	if [ -x $g_firewall ]; then
+	    if [ -n "$g_fast" -a -x ${VARDIR}/${RESTOREFILE} -a ! $g_firewall -nt ${VARDIR}/${RESTOREFILE} ]; then
 		run_it ${VARDIR}/${RESTOREFILE} $g_debugging restore
 	    else
-		run_it ${VARDIR}/firewall $g_debugging start
+		run_it $g_firewall $g_debugging start
 	    fi
 	    rc=$?
 	else
-	    error_message "${VARDIR}/firewall is missing or is not executable"
+	    error_message "$g_firewall is missing or is not executable"
 	    mylogger kern.err "ERROR:$g_product start failed"
 	    rc=6
 	fi
@@ -4215,11 +4255,11 @@ restart_command() {
 
     [ -n "$g_nolock" ] || mutex_on
 
-    if [ -x ${VARDIR}/firewall ]; then
-	run_it ${VARDIR}/firewall $g_debugging $COMMAND
+    if [ -x $g_firewall ]; then
+	run_it $g_firewall $g_debugging $COMMAND
 	rc=$?
     else
-	error_message "${VARDIR}/firewall is missing or is not executable"
+	error_message "$g_firewall is missing or is not executable"
 	mylogger kern.err "ERROR:$g_product $COMMAND failed"
 	rc=6
     fi
@@ -4229,10 +4269,10 @@ restart_command() {
 }
 
 run_command() {
-    if [ -x ${VARDIR}/firewall ] ; then
-	run_it ${VARDIR}/firewall $g_debugging $@
+    if [ -x $g_firewall ] ; then
+	run_it $g_firewall $g_debugging $@
     else
-	fatal_error "${VARDIR}/firewall does not exist or is not executable"
+	fatal_error "$g_firewall does not exist or is not executable"
     fi
 }
 
@@ -4290,7 +4330,6 @@ usage() # $1 = exit status
 
     echo "   open <source> <dest> [ <protocol> [ <port> ] ]" 
     echo "   reenable <interface>"
-    ecko "   refresh [ -d ] [ -n ] [ -T ] [ -D <directory> ] [ <chain>... ]"
     echo "   reject <address> ..."
 
     if [ -n "$g_lite" ]; then
@@ -4300,9 +4339,11 @@ usage() # $1 = exit status
     fi
 
     if [ -z "$g_lite" ]; then
-	echo "   remote-reload [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
-	echo "   remote-restart [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
-	echo "   remote-start [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-getrc [ -T ] [ -c ] [ -r <root-name> ] [ [ -D ] <directory> ] [ <system> ]"
+	echo "   remote-getcaps [ -T ] [ -R ] [ -r <root-name> ] [ [ -D ] <directory> ] [ <system> ]"
+	echo "   remote-reload [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] [ <system> ]"
+	echo "   remote-restart [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] [ <system> ]"
+	echo "   remote-start [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] [ <system> ]"
     fi
 
     echo "   reset [ <chain> ... ]"
@@ -4345,7 +4386,9 @@ usage() # $1 = exit status
     echo "   [ show | list | ls ] nfacct"
     echo "   [ show | list | ls ] opens"
     echo "   [ show | list | ls ] policies"
+    echo "   [ show | list | ls ] rc"
     echo "   [ show | list | ls ] routing"
+    echo "   [ show | list | ls ] saves"
     echo "   [ show | list | ls ] tc [ device ]"
     echo "   [ show | list | ls ] vardir"
     echo "   [ show | list | ls ] zones"
@@ -4394,7 +4437,6 @@ shorewall_cli() {
     g_use_verbosity=
     g_debug=
     g_export=
-    g_refreshchains=:none:
     g_confess=
     g_update=
     g_annotate=
@@ -4413,6 +4455,7 @@ shorewall_cli() {
     g_nopager=
     g_blacklistipset=
     g_disconnect=
+    g_havemutex=
 
     VERBOSE=
     VERBOSITY=1
@@ -4585,12 +4628,14 @@ shorewall_cli() {
 
     case "$COMMAND" in
 	start)
+	    only_root
 	    get_config Yes Yes
 	    shift
 	    start_command $@
 	    ;;
 	stop|clear)
 	    [ $# -ne 1 ] && too_many_arguments $2
+	    only_root
 	    get_config
 	    [ -x $g_firewall ] || fatal_error "$g_product has never been started"
 	    [ -n "$g_nolock" ] || mutex_on
@@ -4598,6 +4643,7 @@ shorewall_cli() {
 	    [ -n "$g_nolock" ] || mutex_off
 	    ;;
 	reset)
+	    only_root
 	    get_config
 	    shift
 	    [ -n "$g_nolock" ] || mutex_on
@@ -4606,19 +4652,22 @@ shorewall_cli() {
 	    [ -n "$g_nolock" ] || mutex_off
 	    ;;
 	reload|restart)
+	    only_root
 	    get_config Yes Yes
 	    shift
 	    restart_command $@
 	    ;;
 	disable|enable|reenable)
+	    only_root
 	    get_config Yes
 	    if product_is_started; then
-		run_it ${VARDIR}/firewall $g_debugging $@
+		run_it $g_firewall $g_debugging $@
 	    else
 		fatal_error "$g_product is not running"
 	    fi
 	    ;;
 	blacklist)
+	    only_root
 	    get_config Yes
 	    shift
 	    [ -n "$g_nolock" ] || mutex_on
@@ -4627,6 +4676,7 @@ shorewall_cli() {
 	    ;;
 	run)
 	    [ $# -gt 1 ] || fatal_error "Missing function name"
+	    only_root
 	    get_config Yes
 	    run_command $@
 	    ;;
@@ -4636,18 +4686,20 @@ shorewall_cli() {
     	    show_command $@
 	    ;;
 	status)
-	    [ "$(id -u)" != 0 ] && fatal_error "The status command may only be run by root"
+	    only_root
 	    get_config
 	    shift
 	    status_command $@
 	    ;;
 	dump)
+	    only_root
 	    get_config Yes No Yes
     	    shift
     	    dump_command $@
 	    ;;
 	hits)
 	    [ $g_family -eq 6 ] && fatal_error "$g_product does not support the hits command"
+	    only_root
 	    get_config Yes No Yes
 	    [ -n "$g_debugging" ] && set -x
 	    shift
@@ -4658,53 +4710,63 @@ shorewall_cli() {
 	    version_command $@
 	    ;;
 	logwatch)
+	    only_root
 	    get_config Yes Yes Yes
 	    banner="${g_product}-$SHOREWALL_VERSION Logwatch at $g_hostname -"
 	    logwatch_command $@
 	    ;;
 	drop)
+	    only_root
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    [ $# -eq 1 ] && missing_argument
 	    drop_command $@
 	    ;;
 	logdrop)
+	    only_root
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    [ $# -eq 1 ] && missing_argument
 	    logdrop_command $@
 	    ;;
 	reject|logreject)
+	    only_root
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    [ $# -eq 1 ] && missing_argument
 	    reject_command $@
 	    ;;
 	open|close)
+	    only_root
 	    get_config
 	    shift
 	    open_close_command $@
 	    ;;
 	allow)
+	    only_root
 	    get_config
 	    allow_command $@
 	    ;;
 	add)
+	    only_root
 	    get_config
 	    shift
 	    add_command $@
 	    ;;
 	delete)
+	    only_root
 	    get_config
 	    shift
 	    delete_command $@
 	    ;;
 	save)
+	    only_root
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    save_command $@
 	    ;;
 	forget)
+	    only_root
 	    get_config
 	    forget_command $@
 	    ;;
@@ -4721,11 +4783,13 @@ shorewall_cli() {
 	    ipdecimal_command $@
 	    ;;
 	restore)
+	    only_root
 	    get_config
 	    shift
 	    restore_command $@
             ;;
 	call)
+	    only_root
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    #
@@ -4763,17 +4827,20 @@ shorewall_cli() {
 	    usage
 	    ;;
 	iptrace)
+	    only_root
 	    get_config
 	    shift
 	    iptrace_command $@
 	    ;;
 	noiptrace)
+	    only_root
 	    get_config
 	    shift
 	    noiptrace_command $@
 	    ;;
 	savesets)
 	    [ $# -eq 1 ] || too_many_arguments $2
+	    only_root
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    savesets1

Shorewall-core/lib.common

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.1 -- /usr/share/shorewall/lib.common.
+# Shorewall 5.2 -- /usr/share/shorewall/lib.common
 #
-#     (c) 2010-2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2018 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -419,7 +419,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	. $modules
 	if [ $savemoduleinfo = Yes ]; then
 	    [ -d ${VARDIR} ] || mkdir -p ${VARDIR}
-	    echo MODULESDIR="$MODULESDIR" > ${VARDIR}/.modulesdir
+	    echo MODULESDIR=\"$MODULESDIR\" > ${VARDIR}/.modulesdir
 	    cp -f $modules ${VARDIR}/.modules
 	fi
     elif [ $savemoduleinfo = Yes ]; then
@@ -501,7 +501,7 @@ ip_network() {
 
 #
 # The following hack is supplied to compensate for the fact that many of
-# the popular light-weight Bourne shell derivatives don't support XOR ("^").
+# the popular light-weight Bourne shell derivatives do not support XOR ("^").
 #
 ip_broadcast() {
     local x
@@ -751,36 +751,44 @@ mutex_on()
     lockf=${LOCKFILE:=${VARDIR}/lock}
     local lockpid
     local lockd
+    local lockbin
+    local openwrt
 
     MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}
 
-    if [ $MUTEX_TIMEOUT -gt 0 ]; then
+    if [ -z "$g_havemutex" -a $MUTEX_TIMEOUT -gt 0 ]; then
 
 	lockd=$(dirname $LOCKFILE)
 
 	[ -d "$lockd" ] || mkdir -p "$lockd"
 
+	lockbin=$(mywhich lock)
+	[ -n "$lockbin" -a -h "$lockbin" ] && openwrt=Yes
+
 	if [ -f $lockf ]; then
 	    lockpid=`cat ${lockf} 2> /dev/null`
-	    if [ -z "$lockpid" -o $lockpid = 0 ]; then
+	    if [ -z "$lockpid" ] || [ $lockpid = 0 ]; then
 		rm -f ${lockf}
 		error_message "WARNING: Stale lockfile ${lockf} removed"
-	    elif [ $lockpid -eq $$ ]; then
-                return 0
-	    elif ! ps | grep -v grep | qt grep ${lockpid}; then
-		rm -f ${lockf}
-		error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
+	    elif [ -z "$openwrt" ]; then
+		if [ $lockpid -eq $$ ]; then
+                    fatal_error "Mutex_on confusion"
+		elif ! qt ps --pid ${lockpid}; then
+		    rm -f ${lockf}
+		    error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
+		fi
 	    fi
 	fi
 
-	if qt mywhich lockfile; then
-	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf}
+	if [ -n "$openwrt" ]; then
+	    lock ${lockf} || fatal_error "Can't lock ${lockf}"
+	    g_havemutex="lock -u ${lockf}"
+	elif qt mywhich lockfile; then
+	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf} || fatal_error "Can't lock ${lockf}"
+	    g_havemutex="rm -f ${lockf}"
 	    chmod u+w ${lockf}
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
-	elif qt mywhich lock; then
-            lock ${lockf}
-            chmod u=r ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1
@@ -790,10 +798,15 @@ mutex_on()
 	    if  [ ${try} -lt ${MUTEX_TIMEOUT} ] ; then
 	        # Create the lockfile
 		echo $$ > ${lockf}
+		g_havemutex="rm -f ${lockf}"
 	    else
 		echo "Giving up on lock file ${lockf}" >&2
 	    fi
 	fi
+
+	if [ -n "$g_havemutex" ]; then
+	    trap mutex_off EXIT
+	fi
     fi
 }
 
@@ -802,7 +815,10 @@ mutex_on()
 #
 mutex_off()
 {
-    [ -f ${CONFDIR}/rc.common ] && lock -u ${LOCKFILE:=${VARDIR}/lock}
-    rm -f ${LOCKFILE:=${VARDIR}/lock}
+    if [ -n "$g_havemutex" ]; then
+	eval $g_havemutex
+	g_havemutex=
+	trap '' exit
+    fi
 }
 

Shorewall-core/lib.core

@@ -1,5 +1,5 @@
 #
-# Shorewall 5.1 -- /usr/share/shorewall/lib.core
+# Shorewall 5.2 -- /usr/share/shorewall/lib.core
 #
 #     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-core/lib.installer

@@ -1,6 +1,5 @@
 #
-#
-# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
+# Shorewall 5.2 -- /usr/share/shorewall/lib.installer
 #
 #     (c) 2017 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)

Shorewall-core/lib.uninstaller

@@ -1,6 +1,5 @@
 #
-#
-# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
+# Shorewall 5.2 -- /usr/share/shorewall/lib.installer
 #
 #     (c) 2017 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
@@ -61,7 +60,7 @@ mywhich() {
 remove_file() # $1 = file to remove
 {
     if [ -n "$1" ] ; then
-        if [ -f $1 -o -L $1 ] ; then
+        if [ -f $1 -o -h $1 ] ; then
             rm -f $1
             echo "$1 Removed"
         fi
@@ -85,7 +84,7 @@ remove_file_with_wildcard() # $1 = file with wildcard to remove
             if [ -d $f ] ; then
                 rm -rf $f
                 echo "$f Removed"
-            elif [ -f $f -o -L $f ] ; then
+            elif [ -f $f -o -h $f ] ; then
                 rm -f $f
                 echo "$f Removed"
             fi

Shorewall-core/manpages/shorewall.xml

@@ -405,20 +405,6 @@
       <replaceable>provider</replaceable> }</arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall[6]</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>options</arg>
-
-      <arg
-      choice="plain"><option>refresh</option><arg><option>-n</option></arg><arg><option>-d</option></arg><arg><option>-T</option></arg><arg><option>-i</option></arg><arg>-<option>D</option>
-      <replaceable>directory</replaceable> </arg><arg
-      rep="repeat"><replaceable>chain</replaceable></arg></arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall[6][-lite]</command>
 
@@ -459,6 +445,54 @@
       <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall[6]</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>options</arg>
+
+      <arg choice="plain"><option>remote-getcaps</option></arg>
+
+      <arg><option>-s</option></arg>
+
+      <arg><option>-R</option></arg>
+
+      <arg><option>-r</option> <replaceable>root-user-name</replaceable></arg>
+
+      <arg><option>-T</option></arg>
+
+      <arg><option>-i</option></arg>
+
+      <arg><arg><option>-D</option></arg><replaceable>directory</replaceable></arg>
+
+      <arg choice="plain"><arg><replaceable>system</replaceable></arg></arg>
+    </cmdsynopsis>
+
+    <cmdsynopsis>
+      <command>shorewall[6]</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>options</arg>
+
+      <arg choice="plain"><option>remote-getrc</option></arg>
+
+      <arg><option>-s</option></arg>
+
+      <arg><option>-c</option></arg>
+
+      <arg><option>-r</option> <replaceable>root-user-name</replaceable></arg>
+
+      <arg><option>-T</option></arg>
+
+      <arg><option>-i</option></arg>
+
+      <arg><arg><option>-D</option></arg><replaceable>directory</replaceable></arg>
+
+      <arg choice="plain"><arg><replaceable>system</replaceable></arg></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall[6]</command>
 
@@ -813,7 +847,7 @@
 
       <arg choice="req"><option>show | list | ls </option></arg>
 
-      <arg choice="plain"><option>tc</option></arg>
+      <arg choice="plain"><option>saves</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -1316,7 +1350,7 @@
           by the compiled script that executed the last successful <emphasis
           role="bold">start</emphasis>, <emphasis
           role="bold">restart</emphasis> or <emphasis
-          role="bold">refresh</emphasis> command if that script exists.</para>
+          role="bold">reload</emphasis> command if that script exists.</para>
         </listitem>
       </varlistentry>
 
@@ -1773,63 +1807,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term><emphasis role="bold">refresh </emphasis> [-<option>n</option>]
-        [-<option>d</option>] [-<option>T</option>] [-i] [-<option>D
-        </option><replaceable>directory</replaceable> ] [
-        <replaceable>chain</replaceable>... ]</term>
-
-        <listitem>
-          <para>Not available with Shorewall[6]-lite.</para>
-
-          <para>All steps performed by <command>restart</command> are
-          performed by <command>refresh</command> with the exception that
-          <command>refresh</command> only recreates the chains specified in
-          the command while <command>restart</command> recreates the entire
-          Netfilter ruleset. If no <replaceable>chain</replaceable> is given,
-          the static blacklisting chain <emphasis
-          role="bold">blacklst</emphasis> is assumed.</para>
-
-          <para>The listed chains are assumed to be in the filter table. You
-          can refresh chains in other tables by prefixing the chain name with
-          the table name followed by ":" (e.g., nat:net_dnat). Chain names
-          which follow are assumed to be in that table until the end of the
-          list or until an entry in the list names another table. Built-in
-          chains such as FORWARD may not be refreshed.</para>
-
-          <para>The <option>-n</option> option was added in Shorewall 4.5.3
-          causes Shorewall to avoid updating the routing table(s).</para>
-
-          <para>The <option>-d</option> option was added in Shorewall 4.5.3
-          causes the compiler to run under the Perl debugger.</para>
-
-          <para>The <option>-T</option> option was added in Shorewall 4.5.3
-          and causes a Perl stack trace to be included with each
-          compiler-generated error and warning message.</para>
-
-          <para>The <option>-i</option> option was added in Shorewall 4.6.0
-          and causes a warning message to be issued if the current line
-          contains alternative input specifications following a semicolon
-          (";"). Such lines will be handled incorrectly if INLINE_MATCHES is
-          set to Yes in <ulink
-          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
-
-          <para>The <option>-D</option> option was added in Shorewall 4.5.3
-          and causes Shorewall to look in the given
-          <emphasis>directory</emphasis> first for configuration files.</para>
-
-          <para>Example:<programlisting><command>shorewall refresh net2fw nat:net_dnat</command> #Refresh the 'net2loc' chain in the filter table and the 'net_dnat' chain in the nat table</programlisting></para>
-
-          <para>The <emphasis role="bold">refresh</emphasis> command has
-          slightly different behavior. When no chain name is given to the
-          <emphasis role="bold">refresh</emphasis> command, the mangle table
-          is refreshed along with the blacklist chain (if any). This allows
-          you to modify <filename>/etc/shorewall/tcrules </filename>and
-          install the changes using <emphasis
-          role="bold">refresh</emphasis>.</para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term><emphasis role="bold">reject</emphasis><replaceable>
         address</replaceable></term>
@@ -1941,6 +1918,57 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">remote-getcaps</emphasis>
+        [-<option>R</option>] [-<option>r</option>
+        <replaceable>root-user-name</replaceable>] [ [ -D ]
+        <replaceable>directory</replaceable> ] [
+        <replaceable>system</replaceable> ]</term>
+
+        <listitem>
+          <para>Added in Shoreall 5.2.0, this command executes <emphasis
+          role="bold">shorewall[6]-lite show capabilities -f &gt;
+          /var/lib/shorewall[6]-lite/capabilities</emphasis> on the remote
+          <replaceable>system</replaceable> via ssh then the generated file is
+          copied to <replaceable>directory</replaceable> on the local system.
+          If no <replaceable>directory</replaceable> is given, the current
+          working directory is assumed.</para>
+
+          <para>if <emphasis role="bold">-R</emphasis> is included, the remote
+          shorewallrc file is also copied to
+          <replaceable>directory</replaceable>.</para>
+
+          <para>If <option>-r</option> is included, it specifies that the root
+          user on <replaceable>system</replaceable> is named
+          <replaceable>root-user-name</replaceable> rather than "root".</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">remote-getrc</emphasis>
+        [-<option>c</option>] [-<option>r</option>
+        <replaceable>root-user-name</replaceable>] [ [ -D ]
+        <replaceable>directory</replaceable> ] [
+        <replaceable>system</replaceable> ]</term>
+
+        <listitem>
+          <para>Added in Shoreall 5.2.0, this command copies the shorewallrc
+          file from the remote <replaceable>system</replaceable> to
+          <replaceable>directory</replaceable> on the local system. If no
+          <replaceable>directory</replaceable> is given, the current working
+          directory is assumed.</para>
+
+          <para>if <emphasis role="bold">-c</emphasis> is included, the remote
+          capabilities are also copied to
+          <replaceable>directory</replaceable>, as is done by the
+          <command>remote-getcaps</command> command.</para>
+
+          <para>If <option>-r</option> is included, it specifies that the root
+          user on <replaceable>system</replaceable> is named
+          <replaceable>root-user-name</replaceable> rather than "root".</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">remote-start</emphasis>
         [-<option>n</option>] [-<option>s</option>] [-<option>c</option>]
@@ -1992,9 +2020,9 @@
           role="bold">shorewall-lite save</emphasis> via ssh.</para>
 
           <para>if <emphasis role="bold">-c</emphasis> is included, the
-          command <emphasis role="bold">shorewall-lite show capabilities -f
-          &gt; /var/lib/shorewall-lite/capabilities</emphasis> is executed via
-          ssh then the generated file is copied to
+          command <emphasis role="bold">shorewall[6]-lite show capabilities -f
+          &gt; /var/lib/shorewall[6]-lite/capabilities</emphasis> is executed
+          via ssh then the generated file is copied to
           <replaceable>directory</replaceable> using scp. This step is
           performed before the configuration is compiled.</para>
 
@@ -2005,13 +2033,6 @@
           <para>The <option>-T</option> option was added in Shorewall 4.5.3
           and causes a Perl stack trace to be included with each
           compiler-generated error and warning message.</para>
-
-          <para>The <option>-i</option> option was added in Shorewall 4.6.0
-          and causes a warning message to be issued if the current line
-          contains alternative input specifications following a semicolon
-          (";"). Such lines will be handled incorrectly if INLINE_MATCHES is
-          set to Yes in <ulink
-          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
         </listitem>
       </varlistentry>
 
@@ -2430,11 +2451,11 @@
         <replaceable>filename</replaceable> ]</term>
 
         <listitem>
-          <para>The dynamic blacklist is stored in /var/lib/shorewall/save.
-          The state of the firewall is stored in
+          <para>Creates a snapshot of the currently running firewall. The
+          dynamic blacklist is stored in /var/lib/shorewall/save. The state of
+          the firewall is stored in
           /var/lib/shorewall/<emphasis>filename</emphasis> for use by the
-          <emphasis role="bold">shorewall restore</emphasis> and <emphasis
-          role="bold">shorewall -f start</emphasis> commands. If
+          <emphasis role="bold">shorewall restore</emphasis> command. If
           <emphasis>filename</emphasis> is not given then the state is saved
           in the file specified by the RESTOREFILE option in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
@@ -2737,6 +2758,15 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis role="bold">rc</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.2.0. Displays the contents of
+                $SHAREDIR/shorewall/shorewallrc.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term>[-<option>c</option>]<emphasis role="bold">
               routing</emphasis></term>
@@ -2762,6 +2792,20 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term>saves</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.2.0. Lists snapshots created by the
+                <command>save</command> command. Each snapshot is listed with
+                the date and time when it was taken. If there is a snapshot
+                with the name specified in the RESTOREFILE option in <ulink
+                url="shorewall.conf.html">shorewall.conf(5</ulink>), that
+                snapshot is listed as the <emphasis>default</emphasis>
+                snapshot for the <command>restore</command> command.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">tc</emphasis></term>
 
@@ -2921,7 +2965,7 @@
           by the compiled script that executed the last successful <emphasis
           role="bold">start</emphasis>, <emphasis
           role="bold">restart</emphasis> or <emphasis
-          role="bold">refresh</emphasis> command if that script exists.</para>
+          role="bold">reload</emphasis> command if that script exists.</para>
         </listitem>
       </varlistentry>
 
@@ -3172,30 +3216,38 @@
   <refsect1>
     <title>FILES</title>
 
-    <para>/etc/shorewall/</para>
+    <para>/etc/shorewall/*</para>
 
-    <para>/etc/shorewall6/</para>
+    <para>/etc/shorewall6/*</para>
   </refsect1>
 
   <refsect1>
     <title>See ALSO</title>
 
-    <para><ulink
-    url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>
+    <simplelist>
+      <member><ulink
+      url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink>
+      - Describes operational aspects of Shorewall.</member>
 
-    <para>shorewall-accounting(5), shorewall-actions(5),
-    shorewall-arprules(5), shorewall-blrules(5), shorewall.conf(5),
-    shorewall-conntrack(5), shorewall-ecn(5), shorewall-exclusion(5),
-    shorewall-hosts(5), shorewall-init(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-logging(), shorewall-maclist(5),
-    shorewall-mangle(5), shorewall-masq(5), shorewall-modules(5),
-    shorewall-nat(5), shorewall-nesting(5), shorewall-netmap(5),
-    shorewall-params(5), shorewall-policy(5), shorewall-providers(5),
-    shorewall-proxyarp(5), shorewall6-proxyndp(5), shorewall-routes(5),
-    shorewall-rtrules(5), shorewall-rtrules(5), shorewall-rules(5),
-    shorewall-secmarks(5), shorewall-snat(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-tcfilters(5), shorewall-tcinterfaces(5),
-    shorewall-tcpri(5), shorewall-tunnels(5), shorewall-vardir(5),
-    shorewall-zones(5)</para>
+      <member><ulink url="shorewall-files.html">shorewall-files(5)</ulink> -
+      Describes the various configuration files along with features and
+      conventions common to those files.</member>
+
+      <member><ulink url="shorewall-names.html">shorewall-names(5)</ulink> -
+      Describes naming of objects within a Shorewall configuration.</member>
+
+      <member><ulink
+      url="shorewall-addresses.html">shorewall-addresses(5)</ulink> -
+      Describes how to specify addresses within a Shorewall
+      configuration.</member>
+
+      <member><ulink
+      url="shorewall-exclusion.html">shorewall-exclusion(5)</ulink> -
+      Describes how to exclude certain hosts and/or networks from matching a
+      rule.</member>
+
+      <member><ulink url="shorewall-nesting.html">shorewall-nesting(5)</ulink>
+      - Describes how to nest one Shorewall zone inside another.</member>
+    </simplelist>
   </refsect1>
 </refentry>

Shorewall-core/shorewall

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     Shorewall Packet Filtering Firewall Control Program - V5.1
+#     Shorewall Packet Filtering Firewall Control Program - V5.2
 #
 #     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015-2017
 #         Tom Eastep (teastep@shorewall.net)

Shorewall-core/shorewallrc.alt

@@ -0,0 +1,25 @@
+#
+# ALT/BaseALT/ALTLinux Shorewall 5.2 rc file
+#
+BUILD=                                  #Default is to detect the build system
+HOST=alt
+PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/libexec            #Directory for executable scripts.
+PERLLIBDIR=${SHAREDIR}/perl5            #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                            #Directory where subsystem configurations are installed
+SBINDIR=/sbin                           #Directory where system administration programs are installed
+MANDIR=${SHAREDIR}/man                  #Directory where manpages are installed.
+INITDIR=${CONFDIR}/rc.d/init.d          #Directory where SysV init scripts are installed.
+INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITSOURCE=init.alt.sh                  #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                              #If non-zero, annotated configuration files are installed
+SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
+SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed as $SYSCONFDIR/$PRODUCT
+SERVICEFILE=                            #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter files are installed
+SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
+SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/var/lib                         #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=/usr/bin/less             #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.apple

@@ -1,5 +1,5 @@
 #
-# Apple OS X Shorewall 5.0 rc file
+# Apple OS X Shorewall 5.2 rc file
 #
 BUILD=apple
 HOST=apple

Shorewall-core/shorewallrc.archlinux

@@ -1,5 +1,5 @@
 #
-# Arch Linux Shorewall 5.0 rc file
+# Arch Linux Shorewall 5.2 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=archlinux

Shorewall-core/shorewallrc.cygwin

@@ -1,5 +1,5 @@
 #
-# Cygwin Shorewall 5.0 rc file
+# Cygwin Shorewall 5.2 rc file
 #
 BUILD=cygwin
 HOST=cygwin

Shorewall-core/shorewallrc.debian.systemd

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.0 rc file
+# Debian Shorewall 5.2 rc file
 #
 BUILD=					#Default is to detect the build system
 HOST=debian
@@ -13,9 +13,9 @@ MANDIR=${PREFIX}/share/man		#Directory where manpages are installed.
 INITDIR=				#Directory where SysV init scripts are installed.
 INITFILE=				#Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
-ANNOTATED=				#If non-zero, annotated configuration files are installed
-SYSCONFFILE=default.debian.systemd		#Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+ANNOTATED=				#If non-empty, annotated configuration files are installed
+SYSCONFFILE=default.debian.systemd	#Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEFILE=$PRODUCT.service.debian	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
 SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR

Shorewall-core/shorewallrc.debian.sysvinit

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.0 rc file
+# Debian Shorewall 5.2 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=debian

Shorewall-core/shorewallrc.default

@@ -1,5 +1,5 @@
 #
-# Default Shorewall 5.0 rc file
+# Default Shorewall 5.2 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=linux                              #Generic Linux

Shorewall-core/shorewallrc.openwrt

@@ -1,5 +1,5 @@
 #
-# OpenWRT Shorewall 5.0 rc file
+# OpenWRT/LEDE Shorewall 5.2 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=openwrt

Shorewall-core/shorewallrc.redhat

@@ -1,5 +1,5 @@
 #
-# RedHat/FedoraShorewall 5.0 rc file
+# RedHat/FedoraShorewall 5.2 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=redhat

Shorewall-core/shorewallrc.sandbox

@@ -0,0 +1,28 @@
+#
+# Shorewall 5.2 rc file for installing into a Sandbox
+#
+BUILD=                                       # Default is to detect the build system
+HOST=linux
+INSTALLDIR=				     # Set this to the directory where you want Shorewall installed
+PREFIX=${INSTALLDIR}/usr		     # Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share		     # Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share		     # Directory for executable scripts.	
+PERLLIBDIR=${PREFIX}/share/shorewall	     # Directory to install Shorewall Perl module directory	
+CONFDIR=${INSTALLDIR}/etc		     # Directory where subsystem configurations are installed				
+SBINDIR=${INSTALLDIR}/sbin		     # Directory where system administration programs are installed			
+MANDIR=		     			     # Leave empty
+INITDIR=				     # Leave empty				     				
+INITSOURCE=				     # Leave empty
+INITFILE=				     # Leave empty
+AUXINITSOURCE=				     # Leave empty
+AUXINITFILE=				     # Leave empty
+SERVICEDIR=				     # Leave empty
+SERVICEFILE=    			     # Leave empty
+SYSCONFFILE=				     # Leave empty
+SYSCONFDIR=				     # Leave empty			
+SPARSE=					     # Leave empty			
+ANNOTATED=				     # If non-empty, annotated configuration files are installed				
+VARLIB=${INSTALLDIR}/var/lib		     # Directory where product variable data is stored.				
+VARDIR=${VARLIB}/$PRODUCT		     # Directory where product variable data is stored.		
+DEFAULT_PAGER=/usr/bin/less		     # Pager to use if none specified in shorewall[6].conf
+SANDBOX=Yes				     # Indicates SANDBOX installation

Shorewall-core/shorewallrc.slackware

@@ -1,5 +1,5 @@
 #
-# Slackware Shorewall 5.0 rc file
+# Slackware Shorewall 5.2 rc file
 #
 BUILD=slackware
 HOST=slackware

Shorewall-core/shorewallrc.suse

@@ -1,5 +1,5 @@
 #
-# SuSE Shorewall 5.0 rc file
+# SuSE Shorewall 5.2 rc file
 #
 BUILD=                                                #Default is to detect the build system
 HOST=suse

Shorewall-core/wait4ifup

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     Shorewall interface helper utility - V4.2
+#     Shorewall interface helper utility - V5.2
 #
 #     (c) 2007,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-init/init.alt.sh

@@ -0,0 +1,150 @@
+#!/bin/sh
+#
+# Shorewall init script
+#
+# chkconfig: - 09 91
+# description: Initialize the shorewall firewall at boot time
+#
+### BEGIN INIT INFO
+# Provides: shorewall-init
+# Required-Start: $local_fs
+# Required-Stop: $local_fs
+# Default-Start: 3 4 5
+# Default-Stop:  0 1 2 6
+# Short-Description: Initialize the shorewall firewall at boot time
+# Description:       Place the firewall in a safe state at boot time
+#                    prior to bringing up the network.
+### END INIT INFO
+
+# Do not load RH compatibility interface.
+WITHOUT_RC_COMPAT=1
+
+# Source function library.
+. /etc/init.d/functions
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+NAME="Shorewall-init firewall"
+PROG="shorewall-init"
+SHOREWALL="$SBINDIR/$PROG"
+LOGGER="logger -i -t $PROG"
+
+# Get startup options (override default)
+OPTIONS=
+
+LOCKFILE=/var/lock/subsys/shorewall-init
+
+# check if shorewall-init is configured or not
+if [ -f "/etc/sysconfig/shorewall-init" ]; then
+	. /etc/sysconfig/shorewall-init
+	if [ -z "$PRODUCTS" ]; then
+		echo "No PRODUCTS configured"
+		exit 6
+	fi
+else
+	echo "/etc/sysconfig/shorewall-init not found"
+	exit 6
+fi
+
+RETVAL=0
+
+# set the STATEDIR variable
+setstatedir() {
+	local statedir
+	if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+		statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+	fi
+
+	[ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+	if [ -x ${STATEDIR}/firewall ]; then
+		return 0
+	elif [ $PRODUCT = shorewall ]; then
+		${SBINDIR}/shorewall compile
+	elif [ $PRODUCT = shorewall6 ]; then
+		${SBINDIR}/shorewall -6 compile
+	else
+		return 1
+	fi
+}
+
+start() {
+	local PRODUCT
+	local STATEDIR
+
+	printf "Initializing \"Shorewall-based firewalls\": "
+
+	for PRODUCT in $PRODUCTS; do
+		if setstatedir; then
+			$STATEDIR/$PRODUCT/firewall ${OPTIONS} stop 2>&1 | "$LOGGER"
+			RETVAL=$?
+		else
+			RETVAL=6
+			break
+		fi
+	done
+
+	if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+		ipset -R < "$SAVE_IPSETS"
+	fi
+
+	[ $RETVAL -eq 0 ] && touch "$LOCKFILE"
+	return $RETVAL
+}
+
+stop() {
+	local PRODUCT
+	local STATEDIR
+
+	printf "Clearing \"Shorewall-based firewalls\": "
+	for PRODUCT in $PRODUCTS; do
+		if setstatedir; then
+			${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | "$LOGGER"
+			RETVAL=$?
+		else
+			RETVAL=6
+			break
+		fi
+	done
+
+	if [ -n "$SAVE_IPSETS" ]; then
+		mkdir -p $(dirname "$SAVE_IPSETS")
+		if ipset -S > "${SAVE_IPSETS}.tmp"; then
+			grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+		else
+			rm -f "${SAVE_IPSETS}.tmp"
+		fi
+	fi
+
+	[ $RETVAL -eq 0 ] && rm -f "$LOCKFILE"
+	return $RETVAL
+}
+
+# See how we were called.
+case "$1" in
+	start)
+	    start
+	    ;;
+	stop)
+	    stop
+	    ;;
+	restart|reload|condrestart|condreload)
+	    # "Not implemented"
+	    ;;
+	condstop)
+	    if [ -e "$LOCKFILE" ]; then
+		stop
+	    fi
+	    ;;
+	status)
+	    status "$PROG"
+	     RETVAL=$?
+	    ;;
+	*)
+	    echo $"Usage: ${0##*/}  {start|stop|restart|reload|condrestart|condstop|status}"
+	    RETVAL=1
+esac
+
+exit $RETVAL

Shorewall-init/init.debian.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall-init/init.openwrt.sh

@@ -1,5 +1,5 @@
 #!/bin/sh /etc/rc.common
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)

Shorewall-init/init.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-init/init.suse.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall-init/install.sh

@@ -181,6 +181,9 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
+		    alt|basealt|altlinux)
+			BUILD=alt
+			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -191,6 +194,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
+	    elif [ -f /etc/altlinux-release ]; then
+		BUILD=alt
 	    elif [ -f /etc/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f /etc/SuSE-release ]; then
@@ -253,6 +258,9 @@ case "$HOST" in
     openwrt)
 	echo "Installing Openwrt-specific configuration..."
 	;;
+    alt)
+	echo "Installing ALT-specific configuration...";
+	;;
     linux)
 	fatal_error "Shorewall-init is not supported on this system"
 	;;

Shorewall-init/shorewall-init

@@ -1,5 +1,5 @@
 #!/bin/bash
-#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #	(c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -34,7 +34,7 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ -x ${STATEDIR}/firewall ]; then
-       return 0
+        return 0
     elif [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then

Shorewall-lite/init.alt.sh

@@ -0,0 +1,117 @@
+#!/bin/sh
+#
+# Shorewall-Lite init script
+#
+# chkconfig: - 28 90
+# description: Packet filtering firewall
+#
+### BEGIN INIT INFO
+# Provides: shorewall-lite
+# Required-Start: $local_fs $remote_fs $syslog $network
+# Should-Start: $time $named
+# Required-Stop:
+# Default-Start: 3 4 5
+# Default-Stop:  0 1 2 6
+# Short-Description: Packet filtering firewall
+# Description: The Shoreline Firewall, more commonly known as "Shorewall", is a
+#              Netfilter (iptables) based firewall
+### END INIT INFO
+
+# Do not load RH compatibility interface.
+WITHOUT_RC_COMPAT=1
+
+# Source function library.
+. /etc/init.d/functions
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+NAME="Shorewall-Lite firewall"
+PROG="shorewall"
+SHOREWALL="$SBINDIR/$PROG -l"
+LOGGER="logger -i -t $PROG"
+
+# Get startup options (override default)
+OPTIONS=
+
+SourceIfNotEmpty $SYSCONFDIR/${PROG}-lite
+
+LOCKFILE="/var/lock/subsys/${PROG}-lite"
+RETVAL=0
+
+start() {
+	action $"Applying $NAME rules:" "$SHOREWALL" "$OPTIONS" start "$STARTOPTIONS" 2>&1 | "$LOGGER"
+	RETVAL=$?
+	[ $RETVAL -eq 0 ] && touch "$LOCKFILE"
+	return $RETVAL
+}
+
+stop() {
+	action $"Stoping $NAME :" "$SHOREWALL" "$OPTIONS" stop "$STOPOPTIONS" 2>&1 | "$LOGGER"
+	RETVAL=$?
+	[ $RETVAL -eq 0 ] && rm -f "$LOCKFILE"
+	return $RETVAL
+}
+
+restart() {
+	action $"Restarting $NAME rules: " "$SHOREWALL" "$OPTIONS" restart "$RESTARTOPTIONS" 2>&1 | "$LOGGER"
+	RETVAL=$?
+	return $RETVAL
+}
+
+reload() {
+	action $"Reloadinging $NAME rules: " "$SHOREWALL" "$OPTIONS" reload "$RELOADOPTIONS" 2>&1 | "$LOGGER"
+	RETVAL=$?
+	return $RETVAL
+}
+
+clear() {
+	action $"Clearing $NAME rules: " "$SHOREWALL" "$OPTIONS" clear 2>&1 | "$LOGGER"
+	RETVAL=$?
+	return $RETVAL
+}
+
+# See how we were called.
+case "$1" in
+	start)
+	    start
+	    ;;
+	stop)
+	    stop
+	    ;;
+	restart)
+	    restart
+	    ;;
+	reload)
+	    reload
+	    ;;
+	clear)
+	    clear
+	    ;;
+	condrestart)
+	    if [ -e "$LOCKFILE" ]; then
+		restart
+	    fi
+	    ;;
+	condreload)
+	    if [ -e "$LOCKFILE" ]; then
+		restart
+	    fi
+	    ;;
+	condstop)
+	    if [ -e "$LOCKFILE" ]; then
+		stop
+	    fi
+	    ;;
+	status)
+	    "$SHOREWALL" status
+	     RETVAL=$?
+	    ;;
+	*)
+	    echo $"Usage: ${0##*/}  {start|stop|restart|reload|clear|condrestart|condstop|status}"
+	    RETVAL=1
+esac
+
+exit $RETVAL

Shorewall-lite/init.openwrt.sh

@@ -1,6 +1,6 @@
 #!/bin/sh /etc/rc.common
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)

Shorewall-lite/init.sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 RCDLINKS="2,S41 3,S41 6,K41"
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-lite/init.suse.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall-lite/install.sh

@@ -190,6 +190,9 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
+		    alt|basealt|altlinux)
+			BUILD=alt
+			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -198,6 +201,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
+	    elif [ -f /etc/altlinux-release ]; then
+		BUILD=alt
 	    elif [ -f ${CONFDIR}/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f ${CONFDIR}/SuSE-release ]; then
@@ -266,6 +271,9 @@ case "$HOST" in
     openwrt)
 	echo "Installing OpenWRT-specific configuration..."
 	;;
+    alt)
+	echo "Installing ALT-specific configuration...";
+	;;
     linux)
 	;;
     *)

Shorewall-lite/lib.base

@@ -1,5 +1,5 @@
 #
-# Shorewall 4.4 -- /usr/share/shorewall-lite/lib.base
+# Shorewall 5.2 -- /usr/share/shorewall-lite/lib.base
 #
 #     (c) 2011,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-lite/uninstall.sh

@@ -151,7 +151,7 @@ fi
 
 remove_file ${SBINDIR}/$PRODUCT
 
-if [ -L ${SHAREDIR}/$PRODUCT/init ]; then
+if [ -h ${SHAREDIR}/$PRODUCT/init ]; then
     if [ $HOST = openwrt ]; then
 	if [ $configure -eq 1 ] && /etc/init.d/$PRODUCT enabled; then
 	    /etc/init.d/$PRODUCT disable

Shorewall/Actions/action.A_AllowICMPs.deprecated

@@ -1,9 +0,0 @@
-#
-# Shorewall6 -- /usr/share/shorewall/action.A_AllowICMPs
-#
-# This action A_ACCEPTs needed ICMP types
-#
-###############################################################################
-#ACTION		SOURCE		DEST	PROTO		DPORT
-
-AllowICMPs(A_ACCEPT)

Shorewall/Actions/action.A_Drop.deprecated

@@ -1,57 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.A_Drop
-#
-# The audited default DROP common rules
-#
-# This action is invoked before a DROP policy is enforced. The purpose
-# of the action is:
-#
-# a) Avoid logging lots of useless cruft.
-# b) Ensure that certain ICMP packets that are necessary for successful
-#    internet operation are always ACCEPTed.
-#
-# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
-#
-?require AUDIT_TARGET
-?warning "You are using the deprecated A_Drop default action. Please see http://www.shorewall.net/Actions.html
-###############################################################################
-#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
-#
-# Count packets that come through here
-#
-COUNT
-#
-# Special Handling for Auth
-#
-Auth(A_DROP)
-#
-# ACCEPT critical ICMP types
-#
-# For IPv6 connectivity ipv6-icmp broadcasting is required so
-# AllowICMPs must be before broadcast Drop.
-#
-A_AllowICMPs	-	-	icmp
-#
-# Don't log broadcasts and multicasts
-#
-dropBcast(audit)
-dropMcast(audit)
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log.
-#
-dropInvalid(audit)
-#
-# Drop Microsoft noise so that it doesn't clutter up the log.
-#
-SMB(A_DROP)
-A_DropUPnP
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-dropNotSyn(audit)	-	-	tcp
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-A_DropDNSrep

Shorewall/Actions/action.A_REJECT

@@ -1,11 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/action.A_REJECTWITH
+# Shorewall -- /usr/share/shorewall/action.A_REJECT
 #
 # A_REJECT Action.
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.A_REJECT!

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.A_Reject.deprecated

@@ -1,54 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.A_Reject
-#
-# The audited default REJECT action common rules
-#
-# This action is invoked before a REJECT policy is enforced. The purpose
-# of the action is:
-#
-# a) Avoid logging lots of useless cruft.
-# b) Ensure that certain ICMP packets that are necessary for successful
-#    internet operation are always ACCEPTed.
-#
-# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
-?require AUDIT_TARGET
-?warning "You are using the deprecated A_REJECT default action. Please see http://www.shorewall.net/Actions.html
-###############################################################################
-#ACTION		SOURCE	DEST	PROTO
-#
-# Count packets that come through here
-#
-COUNT
-#
-# ACCEPT critical ICMP types
-#
-# For IPv6 connectivity ipv6-icmp broadcasting is required so
-# AllowICMPs must be before broadcast Drop.
-#
-A_AllowICMPs	-	-	icmp
-#
-# Drop Broadcasts and multicasts so they don't clutter up the log
-# (these must *not* be rejected).
-#
-dropBcast(audit)
-dropMcast(audit)
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log (these ICMPs cannot be
-# rejected).
-#
-dropInvalid(audit)
-#
-# Reject Microsoft noise so that it doesn't clutter up the log.
-#
-SMB(A_REJECT)
-A_DropUPnP
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-dropNotSyn(audit)	-	-	tcp
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-A_DropDNSrep

Shorewall/Actions/action.Broadcast

@@ -3,7 +3,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.DNSAmp

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Drop.deprecated

@@ -1,84 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.Drop
-#
-# The former default DROP common rules. Use of this action is now deprecated
-#
-# This action is invoked before a DROP policy is enforced. The purpose
-# of the action is:
-#
-# a) Avoid logging lots of useless cruft.
-# b) Ensure that certain ICMP packets that are necessary for successful
-#    internet operation are always ACCEPTed.
-#
-# The action accepts six optional parameters:
-#
-# 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
-#     actions.
-# 2 - Action to take with Auth requests. Default is to do nothing special
-#     with them.
-# 3 - Action to take with SMB requests. Default is DROP or A_DROP,
-#     depending on the setting of the first parameter.
-# 4 - Action to take with required ICMP packets. Default is ACCEPT or
-#     A_ACCEPT depending on the first parameter.
-# 5 - Action to take with late DNS replies (UDP source port 53). Default
-#     is DROP or A_DROP depending on the first parameter.
-# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
-#     depending on the first parameter.
-#
-# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
-#
-###############################################################################
-?warning "You are using the deprecated Drop default action. Please see http://www.shorewall.net/Actions.html#Default"
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-DEFAULTS -,-,A_DROP,A_ACCEPT,A_DROP,A_DROP
-    ?else
-        ?error The first parameter to Drop must be 'audit' or '-'
-    ?endif
-?else
-DEFAULTS -,-,DROP,ACCEPT,DROP,DROP
-?endif
-
-#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
-#
-# Count packets that come through here
-#
-COUNT
-#
-# Special Handling for Auth
-#
-?if passed(@2)
-Auth(@2)
-?endif
-#
-# ACCEPT critical ICMP types
-#
-# For IPv6 connectivity ipv6-icmp broadcasting is required so
-# AllowICMPs must be before silent broadcast Drop.
-#
-AllowICMPs(@4)	-	-	icmp
-#
-# Don't log broadcasts or multicasts
-#
-Broadcast(DROP,@1)
-Multicast(DROP,@1)
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log.
-#
-Invalid(DROP,@1)
-#
-# Drop Microsoft noise so that it doesn't clutter up the log.
-#
-SMB(@3)
-DropUPnP(@6)
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-NotSyn(DROP,@1)	-	-	tcp
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-DropDNSrep(@5)

Shorewall/Actions/action.Established

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.FIN

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.IfEvent

@@ -135,7 +135,7 @@ if ( $command & $RESET_CMD ) {
     #
     # if the event is armed, remove it and perform the action
     #
-    perl_action_helper( $action , "-m mark --mark $mark/$mark -m recent --remove --name $event" );
+    perl_action_helper( $action , "-m mark --mark $mark/$mark -m recent --remove --name $event $srcdst" );
 } elsif ( $command & $UPDATE_CMD ) {
     perl_action_helper( $action, "-m recent --update ${duration}--hitcount $hitcount --name $event $srcdst" );
 } else {

Shorewall/Actions/action.Invalid

@@ -4,7 +4,7 @@
 # Invalid Action
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Multicast

@@ -3,7 +3,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.New

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.NotSyn

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.RST

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Reject.deprecated

@@ -1,85 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.Reject
-#
-# The former default REJECT action common rules. Use of this action is deprecated.
-#
-# This action is invoked before a REJECT policy is enforced. The purpose
-# of the action is:
-#
-# a) Avoid logging lots of useless cruft.
-# b) Ensure that certain ICMP packets that are necessary for successful
-#    internet operation are always ACCEPTed.
-#
-# The action accepts six optional parameters:
-#
-# 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
-#     actions.
-# 2 - Action to take with Auth requests. Default is to do nothing
-#     special with them.
-# 3 - Action to take with SMB requests. Default is REJECT or A_REJECT,
-#     depending on the setting of the first parameter.
-# 4 - Action to take with required ICMP packets. Default is ACCEPT or
-#     A_ACCEPT depending on the first parameter.
-# 5 - Action to take with late DNS replies (UDP source port 53). Default
-#     is DROP or A_DROP depending on the first parameter.
-# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
-#     depending on the first parameter.
-#
-# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
-###############################################################################
-?warning "You are using the deprecated Reject default action. Please see http://www.shorewall.net/Actions.html#Default"
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-DEFAULTS -,-,A_REJECT,A_ACCEPT,A_DROP,A_DROP
-    ?else
-	?error The first parameter to Reject must be 'audit' or '-'
-    ?endif
-?else
-DEFAULTS -,-,REJECT,ACCEPT,DROP,DROP
-?endif
-
-#ACTION		SOURCE	DEST	PROTO
-#
-# Count packets that come through here
-#
-COUNT
-#
-# Special handling for Auth
-#
-?if passed(@2)
-Auth(@2)
-?endif
-#
-# ACCEPT critical ICMP types
-#
-# For IPv6 connectivity ipv6-icmp broadcasting is required so
-# AllowICMPs must be before silent broadcast Drop.
-#
-AllowICMPs(@4)	-	-	icmp
-#
-# Drop Broadcasts so they don't clutter up the log
-# (broadcasts must *not* be rejected).
-#
-Broadcast(DROP,@1)
-Multicast(DROP,@1)
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log (these ICMPs cannot be
-# rejected).
-#
-Invalid(DROP,@1)
-#
-# Reject Microsoft noise so that it doesn't clutter up the log.
-#
-SMB(@3)
-DropUPnP(@6)
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-NotSyn(DROP,@1)	-	-	tcp
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-DropDNSrep(@5)

Shorewall/Actions/action.Related

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Untracked

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.allowInvalid

@@ -3,7 +3,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.dropInvalid

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Contrib/swping

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     Shorewall WAN Interface monitor - V4.4
+#     Shorewall WAN Interface monitor - V5.2
 #
 #     Inspired by Angsuman Chakraborty's gwping script.
 #

Shorewall/Contrib/swping.init

@@ -1,5 +1,5 @@
 #!/bin/sh
-#     Shorewall WAN Interface monitor - V4.4
+#     Shorewall WAN Interface monitor - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall/Macros/IPFS-swarm

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.IPFS-swarm
+#
+# This macro handles IPFS data traffic (the connection to IPFS swarm).
+#
+###############################################################################
+#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
+
+PARAM   -       -       tcp     4001

Shorewall/Macros/macro.Apcupsd

@@ -1,9 +1,9 @@
 #
-# Shorewall - /usr/share/shorewall/macro.SNMPtrap
+# Shorewall -- /usr/share/shorewall/macro.Apcupsd
 #
-# This macro deprecated by SNMPtrap.
+# This macro handles apcupsd traffic.
 #
 ###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
-SNMPtrap
+PARAM	-	-	tcp	3551

Shorewall/Macros/macro.Cockpit

@@ -0,0 +1,12 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.Cockpit
+#
+# This macro handles Time protocol (RFC868).
+# Unless you are supporting extremely old hardware or software,
+# you shouldn't be using this.  NTP is a superior alternative.
+#
+#		By Eric Teeter
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	9090

Shorewall/Macros/macro.FreeIPA

@@ -0,0 +1,16 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.FreeIPA
+#
+# This macro handles FreeIPA server traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+DNS
+HTTP
+HTTPS
+Kerberos
+Kpasswd
+LDAP
+LDAPS
+NTP

Shorewall/Macros/macro.IPFS-API

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.IPFS-API
+#
+# This macro handles IPFS API port (commands for the IPFS daemon).
+#
+###############################################################################
+#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
+
+PARAM   -       -       tcp     5001

Shorewall/Macros/macro.IPFS-gateway

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.IPFS-gateway
+#
+# This macro handles the IPFS gateway to HTTP.
+#
+###############################################################################
+#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
+
+PARAM   -       -       tcp     8080

Shorewall/Macros/macro.IPFS-swarm

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.IPFS-swarm
+#
+# This macro handles IPFS data traffic (the connection to IPFS swarm).
+#
+###############################################################################
+#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
+
+PARAM   -       -       tcp     4001

Shorewall/Macros/macro.IPMI

@@ -11,14 +11,20 @@
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
 PARAM	-	-	tcp	623		# RMCP
+PARAM	-	-	udp	623		# RMCP
 PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
-PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)
+PARAM	-	-	tcp	5120,5122,5123	# CD,FD,HD (Asus, Aten)
 PARAM	-	-	tcp	5900,5901	# Remote Console (Aten, Dell)
 PARAM	-	-	tcp	7578		# Remote Console (AMI)
-PARAM	-	-	tcp	3520		# Remote Console (Redfish)
-PARAM	-	-	udp	623		# RMCP
+PARAM	-	-	tcp	8889		# WS-MAN
 HTTP
-HTTPS
-SNMP
-SSH						# Serial over Lan
 Telnet
+SNMP
+
+# TLS/secure ports
+PARAM	-	-	tcp	3520		# Remote Console (Redfish)
+PARAM	-	-	tcp	3669		# Virtual Media (Dell)
+PARAM	-	-	tcp	5124,5126,5127	# CD,FD,HD (AMI)
+PARAM	-	-	tcp	7582		# Remote Console (AMI)
+HTTPS
+SSH						# Serial over Lan

Shorewall/Macros/macro.Kpasswd

@@ -0,0 +1,10 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.Kpasswd
+#
+# This macro handles Kerberos "passwd" traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	464
+PARAM	-	-	udp	464

Shorewall/Macros/macro.RedisSecure

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.RedisSecure
+#
+# This macro handles Redis Secure (SSL/TLS) traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	6380

Shorewall/Macros/macro.Rwhois

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.Rwhois
+#
+# This macro handles Remote Who Is (rwhois) traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	4321

Shorewall/Macros/macro.SSDP

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.SSDP
+#
+# This macro handles SSDP (used by DLNA/UPnP) client traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	udp	1900

Shorewall/Macros/macro.SSDPserver

@@ -0,0 +1,10 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.SSDPserver
+#
+# This macro handles SSDP (used by DLNA/UPnP) server bidirectional traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	udp	1900
+PARAM	DEST	SOURCE	udp	-	1900

Shorewall/Perl/Shorewall/ARP.pm

@@ -1,5 +1,5 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/ARP.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/ARP.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall/Perl/Shorewall/Accounting.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Accounting.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Accounting.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -282,7 +282,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 
 	    if ( $dest eq 'any' || $dest eq 'all' || $dest eq ALLIP ) {
 		expand_rule(
-			    ensure_rules_chain ( 'accountout' ) ,
+			    ensure_chain ( $config{ACCOUNTING_TABLE}, 'accountout' ) ,
 			    OUTPUT_RESTRICT ,
 			    $prerule ,
 			    $rule ,

Shorewall/Perl/Shorewall/Compiler.pm

@@ -1,10 +1,10 @@
 #! /usr/bin/perl -w
 #
-#     The Shoreline Firewall Packet Filtering Firewall Compiler - V5.0
+#     The Shoreline Firewall Packet Filtering Firewall Compiler - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2018 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -103,13 +103,13 @@ sub generate_script_1( $ ) {
 
     copy2( $lib, $debug ) if -f $lib;
 
-    emit <<'EOF';
+    emithd<<'EOF';
 ################################################################################
 # Functions to execute the various user exits (extension scripts)
 ################################################################################
 EOF
 
-    for my $exit ( qw/init start tcclear started stop stopped clear refresh refreshed restored enabled disabled/ ) {
+    for my $exit ( qw/init start tcclear started stop stopped clear restored enabled disabled/ ) {
 	emit "\nrun_${exit}_exit() {";
 	push_indent;
 	append_file $exit or emit 'true';
@@ -125,7 +125,7 @@ EOF
 	emit '}';
     }
 
-    emit <<'EOF';
+    emithd <<'EOF';
 ################################################################################
 # End user exit functions
 ################################################################################
@@ -269,13 +269,17 @@ sub generate_script_2() {
 	      'chain_exists DOCKER nat && chain_exists DOCKER && g_docker=Yes',
 	    );
 	emit( 'chain_exists DOCKER-INGRESS   && g_dockeringress=Yes' );
-	emit( 'chain_exists DOCKER-ISOLATION && g_dockernetwork=Yes' );
-	emit( '' );
+	emit( 'chain_exists DOCKER-USER      && g_dockeruser=Yes' );
+	emit( 'if chain_exists DOCKER-ISOLATION; then',
+	      '    g_dockernetwork=One',
+	      'elif chain_exists DOCKER-ISOLATION-STAGE-1; then',
+	      '    g_dockernetwork=Two',
+	      'fi' );
     }
 
     pop_indent;
 
-    emit "\n}\n"; # End of initialize()
+    emit "}\n"; # End of initialize()
 
     emit( '' ,
 	  '#' ,
@@ -312,10 +316,9 @@ sub generate_script_2() {
 	    push_indent;
 
 	    if ( $global_variables == ( ALL_COMMANDS | NOT_RESTORE ) ) {
-
+		verify_required_interfaces(0);
 		set_global_variables(0, 0);
-
-		handle_optional_interfaces(0);
+		handle_optional_interfaces;
 	    }
 
 	    emit ';;';
@@ -327,19 +330,19 @@ sub generate_script_2() {
 	    push_indent;
 	}
 
+	verify_required_interfaces(1);
 	set_global_variables(1,1);
+	handle_optional_interfaces;
 
 	if ( $global_variables & NOT_RESTORE ) {
-	    handle_optional_interfaces(1);
 	    emit ';;';
 	    pop_indent;
 	    pop_indent;
 	    emit ( 'esac' );
-	} else {
-	    handle_optional_interfaces(1);
 	}
     } else {
-	emit( 'true' ) unless handle_optional_interfaces(1);
+	verify_required_interfaces(1);
+	emit( 'true' ) unless handle_optional_interfaces;
     }
 
     pop_indent;
@@ -358,7 +361,7 @@ sub generate_script_2() {
 #    Note: This function is not called when $command eq 'check'. So it must have no side effects other
 #          than those related to writing to the output script file.
 #
-sub generate_script_3($) {
+sub generate_script_3() {
 
     if ( $family == F_IPV4 ) {
 	progress_message2 "Creating iptables-restore input...";
@@ -368,7 +371,6 @@ sub generate_script_3($) {
 
     create_netfilter_load( $test );
     create_arptables_load( $test ) if $have_arptables;
-    create_chainlist_reload( $_[0] );
     create_save_ipsets;
     create_load_ipsets;
 
@@ -385,7 +387,7 @@ sub generate_script_3($) {
 	my $fn = find_file( $config{LOAD_HELPERS_ONLY} ? 'helpers' : 'modules' );
 
 	if ( -f $fn && ( $config{EXPORTMODULES} || ( $export && ! $fn =~ "^$globals{SHAREDIR}/" ) ) ) {
-	    emit 'echo MODULESDIR="$MODULESDIR" > ${VARDIR}/.modulesdir';
+	    emit 'echo MODULESDIR=\"$MODULESDIR\" > ${VARDIR}/.modulesdir';
 	    emit 'cat > ${VARDIR}/.modules << EOF';
 	    open_file $fn;
 
@@ -400,16 +402,10 @@ sub generate_script_3($) {
 	emit 'load_kernel_modules Yes';
     }
 
-    emit '';
-
-    emit ( 'if [ "$COMMAND" = refresh ]; then' ,
-	   '   run_refresh_exit' ,
-	   'else' ,
-	   '    run_init_exit',
-	   'fi',
-	   '' );
-
-    emit( 'load_ipsets' ,
+    emit( '' ,
+	  'run_init_exit',
+	  '' ,
+	  'load_ipsets' ,
 	  '' );
 
     create_nfobjects;
@@ -467,11 +463,6 @@ sub generate_script_3($) {
     dump_proxy_arp;
     emit_unindented '__EOF__';
 
-    emit( '',
-	  'if [ "$COMMAND" != refresh ]; then' );
-
-    push_indent;
-
     emit 'cat > ${VARDIR}/zones << __EOF__';
     dump_zone_contents;
     emit_unindented '__EOF__';
@@ -484,10 +475,6 @@ sub generate_script_3($) {
     dump_mark_layout;
     emit_unindented '__EOF__';
 
-    pop_indent;
-
-    emit "fi\n";
-
     emit '> ${VARDIR}/nat';
 
     add_addresses;
@@ -526,29 +513,12 @@ sub generate_script_3($) {
 
     my $config_dir = $globals{CONFIGDIR};
 
-    emit<<"EOF";
+    emithd <<"EOF";
     set_state Started $config_dir
     run_restored_exit
-elif [ \$COMMAND = refresh ]; then
-    chainlist_reload
+else
+    setup_netfilter
 EOF
-    push_indent;
-    setup_load_distribution;
-    setup_forwarding( $family , 0 );
-    pop_indent;
-    #
-    # Use a parameter list rather than 'here documents' to avoid an extra blank line
-    #
-    emit( '    run_refreshed_exit',
-	  '    do_iptables -N shorewall' );
-
-    emit( '    do_iptables -A shorewall -m recent --set --name %CURRENTTIME' ) if have_capability 'RECENT_MATCH';
-
-    emit( "    set_state Started $config_dir",
-	  '    [ $0 = ${VARDIR}/firewall ] || cp -f $(my_pathname) ${VARDIR}/firewall',
-	  'else',
-	  '    setup_netfilter'	);
-
     push_indent;
     emit 'setup_arptables' if $have_arptables;
     setup_load_distribution;
@@ -573,7 +543,7 @@ EOF
 	  '    run_started_exit',
 	  "fi\n" );
 
-    emit<<'EOF';
+    emithd<<'EOF';
 date > ${VARDIR}/restarted
 
 case $COMMAND in
@@ -583,9 +553,6 @@ case $COMMAND in
     reload)
         mylogger kern.info "$g_product reloaded"
         ;;
-    refresh)
-        mylogger kern.info "$g_product refreshed"
-        ;;
     restore)
         mylogger kern.info "$g_product restored"
         ;;
@@ -620,8 +587,8 @@ sub compile_info_command() {
 #
 sub compiler {
 
-    my ( $scriptfilename, $directory, $verbosity, $timestamp , $debug, $chains , $log , $log_verbosity, $preview, $confess , $update , $annotate , $config_path, $shorewallrc                      , $shorewallrc1 , $inline ) =
-       ( '',              '',         -1,          '',          0,      '',       '',   -1,             0,        0,         0,        0,        , ''          , '/usr/share/shorewall/shorewallrc', ''            , 0 );
+    my ( $scriptfilename, $directory, $verbosity, $timestamp , $debug, $log , $log_verbosity, $preview, $confess , $update , $annotate , $config_path, $shorewallrc                      , $shorewallrc1 ) =
+       ( '',              '',         -1,         '',          0,      '',    -1,             0,        0,         0,        0,        , ''          , '/usr/share/shorewall/shorewallrc', ''            );
 
     $export         = 0;
     $test           = 0;
@@ -650,7 +617,6 @@ sub compiler {
 		  timestamp     => { store => \$timestamp,     validate => \&validate_boolean   } ,
 		  debug         => { store => \$debug,         validate => \&validate_boolean   } ,
 		  export        => { store => \$export ,       validate => \&validate_boolean   } ,
-		  chains        => { store => \$chains },
 		  log           => { store => \$log },
 		  log_verbosity => { store => \$log_verbosity, validate => \&validate_verbosity } ,
 		  test          => { store => \$test },
@@ -658,7 +624,6 @@ sub compiler {
 		  confess       => { store => \$confess,       validate=> \&validate_boolean    } ,
 		  update        => { store => \$update,        validate=> \&validate_boolean    } ,
 		  annotate      => { store => \$annotate,      validate=> \&validate_boolean    } ,
-		  inline        => { store => \$inline,        validate=> \&validate_boolean    } ,
 		  config_path   => { store => \$config_path } ,
 		  shorewallrc   => { store => \$shorewallrc } ,
 		  shorewallrc1  => { store => \$shorewallrc1 } ,
@@ -695,7 +660,7 @@ sub compiler {
     #                                      S H O R E W A L L R C ,
     #                      S H O R E W A L L . C O N F  A N D  C A P A B I L I T I E S
     #
-    get_configuration( $export , $update , $annotate , $inline );
+    get_configuration( $export , $update , $annotate );
     #
     # Chain table initialization depends on shorewall.conf and capabilities. So it must be deferred until
     # now when shorewall.conf has been processed and the capabilities have been determined.
@@ -818,7 +783,7 @@ sub compiler {
     #
     # Setup Masquerade/SNAT
     #
-    setup_snat( $update );
+    setup_snat;
     #
     # Setup Nat
     #
@@ -899,7 +864,7 @@ sub compiler {
 
 	optimize_level0;
 
-	if ( ( my $optimize = $config{OPTIMIZE} ) & 0x1E ) {
+	if ( ( my $optimize = $config{OPTIMIZE} ) & OPTIMIZE_MASK ) {
 	    progress_message2 'Optimizing Ruleset...';
 	    #
 	    # Optimize Policy Chains
@@ -921,7 +886,7 @@ sub compiler {
 	#                          N E T F I L T E R   L O A D
 	#    (Produces setup_netfilter(), setup_arptables(), chainlist_reload() and define_firewall() )
 	#
-	generate_script_3( $chains );
+	generate_script_3();
 	#
 	# We must reinitialize Shorewall::Chains before generating the iptables-restore input
 	# for stopping the firewall

Shorewall/Perl/Shorewall/Config.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Config.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Config.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2018 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -189,6 +189,7 @@ our %EXPORT_TAGS = ( internal => [ qw( create_temp_script
 		                       in_hex8
 		                       in_hexp
 				       emit
+				       emithd
 				       emitstd
 				       emit_unindented
 				       save_progress_message
@@ -302,10 +303,10 @@ our %EXPORT_TAGS = ( internal => [ qw( create_temp_script
                                        DO_SECTION
 				       NORMAL_READ
 
+				       OPTIMIZE_MASK
 				       OPTIMIZE_POLICY_MASK
 				       OPTIMIZE_POLICY_MASK2n4
 				       OPTIMIZE_RULESET_MASK
-				       OPTIMIZE_USE_FIRST
 				       OPTIMIZE_ALL
 				     ) , ] ,
 		   protocols => [ qw (
@@ -413,7 +414,6 @@ our %capdesc = ( NAT_ENABLED     => 'NAT',
 		                    'Old conntrack match syntax',
 		 NEW_CONNTRACK_MATCH =>
 		                    'Extended Connection Tracking Match',
-		 USEPKTTYPE      => 'Packet Type Match',
 		 POLICY_MATCH    => 'Policy Match',
 		 PHYSDEV_MATCH   => 'Physdev Match',
 		 PHYSDEV_BRIDGE  => 'Physdev-is-bridged support',
@@ -465,7 +465,7 @@ our %capdesc = ( NAT_ENABLED     => 'NAT',
 		 TPROXY_TARGET   => 'TPROXY Target',
 		 FLOW_FILTER     => 'Flow Classifier',
 		 FWMARK_RT_MASK  => 'fwmark route mask',
-		 MARK_ANYWHERE   => 'Mark in the filter table',
+		 MARK_ANYWHERE   => 'Mark in the filter and nat tables',
 		 HEADER_MATCH    => 'Header Match',
 		 ACCOUNT_TARGET  => 'ACCOUNT Target',
 		 AUDIT_TARGET    => 'AUDIT Target',
@@ -496,6 +496,10 @@ our %capdesc = ( NAT_ENABLED     => 'NAT',
                  NFLOG_SIZE      => '--nflog-size support',
 		 RESTORE_WAIT_OPTION
 				 => 'iptables-restore --wait option',
+                 NAT_INPUT_CHAIN => 'INPUT chain in NAT table',
+		 #
+		 # Helpers
+		 #
 		 AMANDA_HELPER   => 'Amanda Helper',
 		 FTP_HELPER      => 'FTP Helper',
 		 FTP0_HELPER     => 'FTP-0 Helper',
@@ -543,9 +547,8 @@ use constant {
 	       OPTIMIZE_POLICY_MASK    => 0x02 , # Call optimize_policy_chains()
 	       OPTIMIZE_POLICY_MASK2n4 => 0x06 ,
 	       OPTIMIZE_RULESET_MASK   => 0x1C , # Call optimize_ruleset()
+               OPTIMIZE_MASK           => 0x1E , # Do optimizations beyond level 1
 	       OPTIMIZE_ALL            => 0x1F , # Maximum value for documented categories.
-
-	       OPTIMIZE_USE_FIRST      => 0x1000 # Always use interface 'first' chains -- undocumented
 	     };
 
 our %helpers = ( amanda          => UDP,
@@ -559,7 +562,9 @@ our %helpers = ( amanda          => UDP,
 		 sip             => UDP,
 		 snmp            => UDP,
 		 tftp            => UDP,
-	       );
+    );
+
+use constant { INCLUDE_LIMIT     => 20 };
 
 our %helpers_map;
 
@@ -590,8 +595,6 @@ our %config_files = ( #accounting      => 1,
 		      policy	       => 1,
 		      providers	       => 1,
 		      proxyarp	       => 1,
-		      refresh	       => 1,
-		      refreshed	       => 1,
 		      restored	       => 1,
 		      rawnat	       => 1,
 		      route_rules      => 1,
@@ -666,7 +669,6 @@ our $comments_allowed;       # True if [?]COMMENT is allowed in the current file
 our $nocomment;              # When true, ignore [?]COMMENT in the current file
 our $sr_comment;             # When true, $comment should only be applied to the current rule
 our $warningcount;           # Used to suppress duplicate warnings about missing COMMENT support
-our $checkinline;            # The -i option to check/compile/etc.
 our $directive_callback;     # Function to call in compiler_directive
 
 our $shorewall_dir;          # Shorewall Directory; if non-empty, search here first for files.
@@ -709,13 +711,13 @@ our %validlevels;            # Valid log levels.
 # Deprecated options with their default values
 #
 our %deprecated = (
-		   LEGACY_RESTART => 'no'
+		   LEGACY_RESTART => 'no' ,
 		  );
 #
 # Deprecated options that are eliminated via update
 #
 our %converted = (
-		  LEGACY_RESTART => 1
+		    LEGACY_RESTART => 1 ,
 		 );
 #
 # Eliminated options
@@ -730,6 +732,8 @@ our %eliminated = ( LOGRATE          => 1,
 		    BLACKLISTNEWONLY => 1,
 		    CHAIN_SCRIPTS    => 1,
                     MODULE_SUFFIX    => 1,
+                    MAPOLDACTIONS    => 1,
+		    INLINE_MATCHES   => 1,
 		  );
 #
 # Variables involved in ?IF, ?ELSE ?ENDIF processing
@@ -834,8 +838,8 @@ sub initialize( $;$$$) {
 		    TC_SCRIPT               => '',
 		    EXPORT                  => 0,
 		    KLUDGEFREE              => '',
-		    VERSION                 => "5.1.8-Beta1",
-		    CAPVERSION              => 50106 ,
+		    VERSION                 => '5.2.0-Beta1',
+		    CAPVERSION              => 50200 ,
 		    BLACKLIST_LOG_TAG       => '',
 		    RELATED_LOG_TAG         => '',
 		    MACLIST_LOG_TAG         => '',
@@ -879,6 +883,7 @@ sub initialize( $;$$$) {
 	  UNTRACKED_LOG_LEVEL => undef,
 	  LOG_BACKEND => undef,
 	  LOG_LEVEL => undef,
+	  LOG_ZONE => undef,
 	  #
 	  # Location of Files
 	  #
@@ -937,7 +942,6 @@ sub initialize( $;$$$) {
 	  MACLIST_TTL => undef,
 	  SAVE_IPSETS => undef,
 	  SAVE_ARPTABLES => undef,
-	  MAPOLDACTIONS => undef,
 	  FASTACCEPT => undef,
 	  IMPLICIT_CONTINUE => undef,
 	  IPSET_WARNINGS => undef,
@@ -980,7 +984,6 @@ sub initialize( $;$$$) {
 	  USE_RT_NAMES => undef,
 	  TRACK_RULES => undef,
 	  REJECT_ACTION => undef,
-	  INLINE_MATCHES => undef,
 	  BASIC_FILTERS => undef,
 	  WORKAROUNDS => undef ,
 	  LEGACY_RESTART => undef ,
@@ -994,6 +997,7 @@ sub initialize( $;$$$) {
 	  BALANCE_PROVIDERS => undef ,
 	  PERL_HASH_SEED => undef ,
 	  USE_NFLOG_SIZE => undef ,
+	  RENAME_COMBINED => undef ,
 	  #
 	  # Packet Disposition
 	  #
@@ -1051,7 +1055,6 @@ sub initialize( $;$$$) {
 	       CONNTRACK_MATCH => undef,
 	       NEW_CONNTRACK_MATCH => undef,
 	       OLD_CONNTRACK_MATCH => undef,
-	       USEPKTTYPE => undef,
 	       POLICY_MATCH => undef,
 	       PHYSDEV_MATCH => undef,
 	       PHYSDEV_BRIDGE => undef,
@@ -1129,6 +1132,7 @@ sub initialize( $;$$$) {
 	       NETMAP_TARGET => undef,
 	       NFLOG_SIZE => undef,
 	       RESTORE_WAIT_OPTION => undef,
+	       NAT_INPUT_CHAIN => undef,
 
 	       AMANDA_HELPER => undef,
 	       FTP_HELPER => undef,
@@ -1688,6 +1692,7 @@ sub emit {
 		$line =~ s/^\n// if $lastlineblank;
 		$line =~ s/^/$indent/gm if $indent;
 		$line =~ s/        /\t/gm;
+		$line =~ s/[ \t]+\n/\n/gm;
 		print $script "$line\n" if $script;
 		$lastlineblank = ( substr( $line, -1, 1 ) eq "\n" );
 
@@ -1708,6 +1713,15 @@ sub emit {
     }
 }
 
+#
+# Used to emit a 'here documents' string without introducing an unwanted blank line at the end
+#
+sub emithd( $ ) {
+    my ( $line ) = @_; #make writable
+    chomp $line;
+    emit $line;
+}
+
 #
 # Version of emit() that writes to standard out unconditionally
 #
@@ -1718,6 +1732,7 @@ sub emitstd {
 	    $line =~ s/^\n// if $lastlineblank;
 	    $line =~ s/^/$indent/gm if $indent;
 	    $line =~ s/        /\t/gm;
+	    $line =~ s/[ \t]+\n/\n/gm;
 	    print "$line\n";
 	    $lastlineblank = ( substr( $line, -1, 1 ) eq "\n" );
 	} else {
@@ -2380,8 +2395,6 @@ sub clear_comment();
 sub split_line2( $$;$$$ ) {
     my ( $description, $columnsref, $nopad, $maxcolumns, $inline ) = @_;
 
-    my $inlinematches = $config{INLINE_MATCHES};
-
     my ( $columns, $pairs, $rest );
 
     my $currline = $currentline;
@@ -2404,16 +2417,20 @@ sub split_line2( $$;$$$ ) {
 	    fatal_error "Only one set of double semicolons (';;') allowed on a line" if defined $rest;
 
 	    $currline = $columns;
+	    #
+	    # Remove trailing white space
+	    #
+	    $currline =~ s/\s*$//;
 
 	    $inline_matches = $pairs;
 	    #
 	    # Don't look for matches below
 	    #
-	    $inline = $inlinematches = '';
+	    $inline = '';
 	}
     }
     #
-    # Next, see if there is a semicolon on the line; what follows will be column/value pairs or raw iptables input
+    # Next, see if there is a single semicolon on the line; what follows will be column/value pairs
     #
     ( $columns, $pairs, $rest ) = split( ';', $currline );
 
@@ -2422,42 +2439,6 @@ sub split_line2( $$;$$$ ) {
 	# Found it -- be sure there wasn't more than one.
 	#
 	fatal_error "Only one semicolon (';') allowed on a line" if defined $rest;
-
-	if ( $inlinematches ) {
-	    fatal_error "The $description does not support inline matches (INLINE_MATCHES=Yes)" unless $inline;
-
-	    $inline_matches = $pairs;
-
-	    if ( $columns =~ /^(\s*|.*[^&@%])\{(.*)\}\s*$/ ) {
-		#
-		# Pairs are enclosed in curly brackets.
-		#
-		$columns = $1;
-		$pairs   = $2;
-	    } else {
-		$pairs = '';
-	    }
-	} elsif ( $inline ) {
-	    #
-	    # This file supports INLINE or IPTABLES
-	    #
-	    if ( $currline =~ /^\s*INLINE(?:\(.*\)(:.*)?|:.*)?\s/ || $currline =~ /^\s*IP6?TABLES(?:\(.*\)|:.*)?\s/ ) {
-		$inline_matches = $pairs;
-
-		if ( $columns =~ /^(\s*|.*[^&@%])\{(.*)\}\s*$/ ) {
-		    #
-		    # Pairs are enclosed in curly brackets.
-		    #
-		    $columns = $1;
-		    $pairs   = $2;
-		} else {
-		    warning_message "This entry needs to be changed before INLINE_MATCHES can be set to Yes" if $checkinline;
-		    $pairs = '';
-		}
-	    } 
-	} elsif ( $checkinline ) {
-	    warning_message "This entry needs to be changed before INLINE_MATCHES can be set to Yes";
-	}
     } elsif ( $currline =~ /^(\s*|.*[^&@%])\{(.*)\}$/ ) {
 	#
 	# Pairs are enclosed in curly brackets.
@@ -2548,6 +2529,10 @@ sub split_rawline2( $$;$$$ ) {
     # Delete trailing comment
     #
     $currentline =~ s/\s*#.*//;
+    #
+    # Convert ${...} to $...
+    #
+    $currentline =~ s/\$\{(.*?)\}/\$$1/g;
 
     my @result = &split_line2( @_ );
 
@@ -2848,7 +2833,7 @@ sub evaluate_expression( $$$$ ) {
     }
 
     #                         $1      $2   $3                     -     $4
-    while ( $expression =~ m( ^(.*?) \$({)? (\d+|[a-zA-Z_]\w*) (?(2)}) (.*)$ )x ) {
+    while ( $expression =~ m( ^(.*?) \$(\{)? (\d+|[a-zA-Z_]\w*) (?(2)}) (.*)$ )x ) {
 	my ( $first, $var, $rest ) = ( $1, $3, $4);
 
 	if ( $var =~ /^\d+$/ ) {
@@ -2865,7 +2850,7 @@ sub evaluate_expression( $$$$ ) {
 
     if ( $chain ) {
 	#                         $1      $2   $3                     -     $4
-	while ( $expression =~ m( ^(.*?) \@({)? (\d+|[a-zA-Z]\w*) (?(2)}) (.*)$ )x ) {
+	while ( $expression =~ m( ^(.*?) \@(\{)? (\d+|[a-zA-Z]\w*) (?(2)}) (.*)$ )x ) {
 	    my ( $first, $var, $rest ) = ( $1, $3, $4);
 	    $var = numeric_value( $var ) if $var =~ /^\d/;
 	    $val = $var ? $actparams{$var} : $chain;
@@ -2876,7 +2861,7 @@ sub evaluate_expression( $$$$ ) {
     }
 
     #                         $1      $2   $3      -     $4
-    while ( $expression =~ m( ^(.*?) __({)? (\w+) (?(2)}) (.*)$ )x ) {
+    while ( $expression =~ m( ^(.*?) __(\{)? (\w+) (?(2)}) (.*)$ )x ) {
 	my ( $first, $cap, $rest ) = ( $1, $3, $4);
 
 	if ( exists $capdesc{$cap} ) {
@@ -3045,9 +3030,9 @@ sub process_compiler_directive( $$$$ ) {
 		      $var = $2 || 'chain';
 		      directive_error( "Shorewall variables may only be SET in the body of an action", $filename, $linenumber ) unless $actparams{0};
 		      my $val = $actparams{$var} = evaluate_expression ( $expression,
-									$filename,
-									$linenumber,
-									0  );
+									 $filename,
+									 $linenumber,
+									 0  );
 		      $parmsmodified = PARMSMODIFIED;
 		  } else {
 		      $variables{$2} = evaluate_expression( $expression,
@@ -3341,7 +3326,7 @@ sub copy1( $ ) {
 			my @line = split / /;
 
 			fatal_error "Invalid INCLUDE command"    if @line != 2;
-			fatal_error "INCLUDEs nested too deeply" if @includestack >= 4;
+			fatal_error "INCLUDEs nested too deeply" if @includestack >= INCLUDE_LIMIT;
 
 			my $filename = find_file $line[1];
 
@@ -3551,7 +3536,7 @@ sub read_a_line($);
 sub embedded_shell( $ ) {
     my $multiline = shift;
 
-    fatal_error "INCLUDEs nested too deeply" if @includestack >= 4;
+    fatal_error "INCLUDEs nested too deeply" if @includestack >= INCLUDE_LIMIT;
     my ( $command, $linenumber ) = ( "/bin/sh -c '$currentline", $currentlinenumber );
 
     $directive_callback->( 'SHELL', $currentline ) if $directive_callback;
@@ -3638,7 +3623,7 @@ sub embedded_perl( $ ) {
     $embedded--;
 
     if ( $perlscript ) {
-	fatal_error "INCLUDEs nested too deeply" if @includestack >= 4;
+	fatal_error "INCLUDEs nested too deeply" if @includestack >= INCLUDE_LIMIT;
 
 	assert( close $perlscript );
 
@@ -3806,7 +3791,7 @@ sub expand_variables( \$ ) {
     my ( $lineref, $count ) = ( $_[0], 0 );
     my $chain = $actparams{chain};
     #                         $1      $2   $3                   -     $4
-    while ( $$lineref =~ m( ^(.*?) \$({)? (\d+|[a-zA-Z_]\w*) (?(2)}) (.*)$ )x ) {
+    while ( $$lineref =~ m( ^(.*?) \$(\{)? (\d+|[a-zA-Z_]\w*) (?(2)}) (.*)$ )x ) {
 
 	my ( $first, $var, $rest ) = ( $1, $3, $4);
 
@@ -3845,7 +3830,7 @@ sub expand_variables( \$ ) {
 	#
 	$$lineref =~ s/\\@/??/g;
 	#                         $1      $2   $3                     -     $4
-	while ( $$lineref =~ m( ^(.*?) \@({)? (\d+|[a-zA-Z_]\w*) (?(2)}) (.*)$ )x ) {
+	while ( $$lineref =~ m( ^(.*?) \@(\{)? (\d+|[a-zA-Z_]\w*) (?(2)}) (.*)$ )x ) {
 	    my ( $first, $var, $rest ) = ( $1, $3, $4);
 	    my $val = $var ? $actparams{$var} : $actparams{chain};
 	    $usedcaller = USEDCALLER if $var eq 'caller';
@@ -3861,7 +3846,7 @@ sub expand_variables( \$ ) {
 sub expand_shorewallrc_variables( \$ ) {
     my ( $lineref, $count ) = ( $_[0], 0 );
     #                         $1      $2   $3                  -     $4
-    while ( $$lineref =~ m( ^(.*?) \$({)? (\d+|[a-zA-Z]\w*) (?(2)}) (.*)$ )x ) {
+    while ( $$lineref =~ m( ^(.*?) \$(\{)? (\d+|[a-zA-Z]\w*) (?(2)}) (.*)$ )x ) {
 
 	my ( $first, $var, $rest ) = ( $1, $3, $4);
 
@@ -3992,7 +3977,7 @@ sub read_a_line($) {
 		my @line = split ' ', $currentline;
 
 		fatal_error "Invalid INCLUDE command"    if @line != 2;
-		fatal_error "INCLUDEs/Scripts nested too deeply" if @includestack >= 4;
+		fatal_error "INCLUDEs/Scripts nested too deeply" if @includestack >= INCLUDE_LIMIT;
 
 		my $filename = find_file $line[1];
 
@@ -4446,6 +4431,12 @@ sub Nat_Enabled() {
     qt1( "$iptables $iptablesw -t nat -L -n" );
 }
 
+sub Nat_Input_Chain {
+    have_capability( 'NAT_ENABLED' ) || return '';
+
+    qt1( "$iptables $iptablesw -t nat -L INPUT -n" );
+}
+
 sub Persistent_Snat() {
     have_capability( 'NAT_ENABLED' ) || return '';
 
@@ -4769,10 +4760,6 @@ sub IPSET_V5() {
     $result;
 }
 
-sub Usepkttype() {
-    qt1( "$iptables $iptablesw -A $sillyname -m pkttype --pkt-type broadcast -j ACCEPT" );
-}
-
 sub Addrtype() {
     qt1( "$iptables $iptablesw -A $sillyname -m addrtype --src-type BROADCAST -j ACCEPT" );
 }
@@ -5091,6 +5078,7 @@ our %detect_capability =
       MASQUERADE_TGT => \&Masquerade_Tgt,
       MULTIPORT => \&Multiport,
       NAT_ENABLED => \&Nat_Enabled,
+      NAT_INPUT_CHAIN => \&Nat_Input_Chain,
       NETBIOS_NS_HELPER => \&Netbios_ns_Helper,
       NETMAP_TARGET => \&Netmap_Target,
       NEW_CONNTRACK_MATCH => \&New_Conntrack_Match,
@@ -5127,7 +5115,6 @@ our %detect_capability =
       TIME_MATCH => \&Time_Match,
       TPROXY_TARGET => \&Tproxy_Target,
       UDPLITEREDIRECT => \&Udpliteredirect,
-      USEPKTTYPE => \&Usepkttype,
       XCONNMARK_MATCH => \&Xconnmark_Match,
       XCONNMARK => \&Xconnmark,
       XMARK => \&Xmark,
@@ -5190,6 +5177,7 @@ sub determine_capabilities() {
 	#
 	$capabilities{NAT_ENABLED}     = detect_capability( 'NAT_ENABLED' );
 	$capabilities{PERSISTENT_SNAT} = detect_capability( 'PERSISTENT_SNAT' );
+	$capabilities{NAT_INPUT_CHAIN} = detect_capability( 'NAT_INPUT_CHAIN' );
 	$capabilities{MANGLE_ENABLED}  = detect_capability( 'MANGLE_ENABLED' );
 
 	if ( $capabilities{CONNTRACK_MATCH} = detect_capability( 'CONNTRACK_MATCH' ) ) {
@@ -5237,7 +5225,6 @@ sub determine_capabilities() {
 	$capabilities{MANGLE_FORWARD}  = detect_capability( 'MANGLE_FORWARD' );
 	$capabilities{RAW_TABLE}       = detect_capability( 'RAW_TABLE' );
 	$capabilities{IPSET_MATCH}     = detect_capability( 'IPSET_MATCH' );
-	$capabilities{USEPKTTYPE}      = detect_capability( 'USEPKTTYPE' );
 	$capabilities{ADDRTYPE}        = detect_capability( 'ADDRTYPE' );
 	$capabilities{TCPMSS_MATCH}    = detect_capability( 'TCPMSS_MATCH' );
 	$capabilities{NFQUEUE_TARGET}  = detect_capability( 'NFQUEUE_TARGET' );
@@ -5474,7 +5461,33 @@ sub update_config_file( $ ) {
 	update_default( 'BLACKLIST_DEFAULT', 'dropBcasts,dropNotSyn,dropInvalid' );
     } else {
 	update_default( 'BLACKLIST_DEFAULT', 'AllowICMPs,dropBcasts,dropNotSyn,dropInvalid' );
-    }	
+    }
+
+    for ( qw/DROP_DEFAULT REJECT_DEFAULT BLACKLIST_DEFAULT/ ) {
+	my $policy = $config{ $_ };
+
+	if ( $policy =~ /\bA_(?:Drop|Reject)\b/ ) {
+	    if ( $family == F_IPV4 ) {
+		$policy =~ s/A_(?:Drop|Reject)/Broadcast(A_DROP),Multicast(A_DROP)/;
+	    } else {
+		$policy =~ s/A_(?:Drop|Reject)/AllowICMPS(A_ACCEPT),Broadcast(A_DROP),Multicast(A_DROP)/;
+	    }
+	} elsif ( $policy =~ /\b(?:Drop|Reject)\(\s*audit.*\)/ ) {
+	    if ( $family == F_IPV4 ) {
+		$policy =~ s/(?:Drop|Reject)\(\s*audit.*\)/Broadcast(A_DROP),Multicast(A_DROP)/;
+	    } else {
+		$policy =~ s/(?:Drop|Reject)\(\s*audit.*\)/AllowICMPs(A_ACCEPT),Broadcast(A_DROP),Multicast(A_DROP)/;
+	    }
+	} elsif ( $policy =~ /\b(?:Drop|Reject)\b/ ) {
+	    if ( $family == F_IPV4 ) {
+		$policy =~ s/(?:Drop|Reject)/Broadcast(DROP),Multicast(DROP)/;
+	    } else {
+		$policy =~ s/(?:Drop|Reject)/AllowICMPs,Broadcast(DROP),Multicast(DROP)/;
+	    }
+	}
+
+	$config{$_} = $policy;
+    }
 
     my $fn;
 
@@ -5515,7 +5528,13 @@ sub update_config_file( $ ) {
 			#
 			# OPTION='' - use default if 'Yes' or 'No'
 			#
-			$config{$var} = $val = $default if $default eq 'Yes' || $default eq 'No';
+			if ( $default eq 'Yes' || $default eq 'No' ) {
+			    $config{$var} = $val = $default;
+			} elsif ( $var eq 'CONFIG_PATH' ) {
+			    $val =~ s|^/etc/|\${CONFDIR}|;
+			    $val =~ s|:/etc/|:\${CONFDIR}/g|;
+			    $val =~ s|:/usr/share/|:\${SHAREDIR}|g;
+			}
 		    } else {
 			#
 			# Wasn't mentioned in old file - use default value
@@ -5523,7 +5542,6 @@ sub update_config_file( $ ) {
 			$config{$var} = $val = $default;
 
 		    }
-
 		}
 		if ( supplied $val ) {
 		    #
@@ -5907,7 +5925,7 @@ sub get_params( $ ) {
 		#
 		delete $params{$_};
 	    } else {
-		unless ( $_ eq 'SHOREWALL_INIT_SCRIPT' || $_ eq 'SW_LOGGERTAG' ) {
+		unless ( $_ eq 'SHOREWALL_INIT_SCRIPT' || $_ eq 'SW_LOGGERTAG' || $_ eq 'SW_CONFDIR' ) {
 		    fatal_error "The variable name $_ is reserved and may not be set in the params file"
 			if /^SW_/ || /^SHOREWALL_/ || ( exists $config{$_} && ! exists $ENV{$_} ) || exists $reserved{$_};
 		}
@@ -6004,9 +6022,12 @@ sub export_params() {
 }
 
 #
-# Walk the CONFIG_PATH converting FORMAT and COMMENT lines to compiler directives
+# Walk the CONFIG_PATH converting
+# - FORMAT and COMMENT lines to compiler directives
+# - single semicolons to double semicolons in lines beginning with 'INLINE', IPTABLES or IP6TABLES
+# - Rename macros/actions to their 5.2 counterparts
 #
-sub convert_to_directives() {
+sub convert_to_version_5_2() {
     my $sharedir = $shorewallrc{SHAREDIR};
     #
     # Make a copy of @config_path so that the for-loop below doesn't clobber that list
@@ -6017,7 +6038,7 @@ sub convert_to_directives() {
 
     my $dirtest = qr|^$sharedir/+shorewall6?(?:/.*)?$|;
 
-    progress_message3 "Converting 'FORMAT', 'SECTION' and 'COMMENT' lines to compiler directives...";
+    progress_message3 "Performing Shorewall 5.2 conversions...";
 
     for my $dir ( @path ) {
 	unless ( $dir =~ /$dirtest/ ) {
@@ -6028,40 +6049,129 @@ sub convert_to_directives() {
 
 		opendir( my $dirhandle, $dir ) || fatal_error "Cannot open directory $dir for reading:$!";
 
-		while ( my $file = readdir( $dirhandle ) ) {
-		    unless ( $file eq 'capabilities'       ||
-			     $file eq 'params'             ||
-			     $file =~ /^shorewall6?.conf$/ ||
-			     $file =~ /\.bak$/ ) {
-			$file = "$dir/$file";
-		
-			if ( -f $file && -w _ ) {
+		while ( my $fname = readdir( $dirhandle ) ) {
+		    unless ( $fname eq 'capabilities'       ||
+			     $fname eq 'params'             ||
+			     $fname =~ /^shorewall6?.conf$/ ||
+			     $fname =~ /\.bak$/ ) {
+			#
+			# File we are interested in
+			#
+			my $fullname = "$dir/$fname";
+
+			if ( -f $fullname && -w _ ) {
 			    #
 			    # writeable regular file
 			    #
-			    my $result = system << "EOF";
-			    perl -pi.bak -e '/^\\s*FORMAT\\s+/ && s/FORMAT/?FORMAT/;
-                                             /^\\s*SECTION\\s+/ && s/SECTION/?SECTION/;
-                                             if ( /^\\s*COMMENT\\s+/ ) {
-                                                 s/COMMENT/?COMMENT/;
-                                             } elsif ( /^\\s*COMMENT\\s*\$/ ) {
-                                                 s/COMMENT/?COMMENT/;
-                                             }' $file
-EOF
-			    if ( $result == 0 ) {
-				if ( system( "diff -q $file ${file}.bak > /dev/null" ) ) {
-				    progress_message3 "   File $file updated - old file renamed ${file}.bak";
-				} elsif ( rename "${file}.bak" , $file ) {
-				    progress_message "   File $file not updated -- no bare 'COMMENT', 'SECTION' or 'FORMAT' lines found";
-				    progress_message "   File $file not updated -- no bare 'COMMENT' or 'FORMAT' lines found";
+			    my $v5_2_update = ( $fname eq 'rules'          ||
+						$fname =~ /^action\./      ||
+						$fname =~ /^macro\./       ||
+						$fname eq 'snat'           ||
+						$fname eq 'mangle'         ||
+						$fname eq 'conntrack'      ||
+						$fname eq 'accounting'     ||
+						$fname eq 'masq'           ||
+						$fname eq 'policy' );
+			    my $is_policy   = ( $fname eq 'policy' );
+			    my @file;
+			    my ( $ifile, $ofile );
+			    my $omitting = 0;
+			    my $changed;
+
+			    open $ifile, '<', "$fullname" or fatal_error "Unable to open $fullname: $!";
+
+			    while ( <$ifile> ) {
+				if ( $omitting ) {
+				    $omitting = 0, next if /\s*\??end\s+(?:perl|shell)/i;
 				} else {
-				    warning message "Unable to rename ${file}.bak to $file:$!";
+				    $omitting = 1, next if /\s*\??begin\s+(?:perl|shell)/i;
 				}
+
+				unless ( $omitting || /^\s*[#?]/ ) {
+				    if ( /^\s*FORMAT\s+/ ) {
+					s/FORMAT/?FORMAT/;
+					$changed = 1;
+				    }
+
+				    if ( /^\s*SECTION\s+/ ) {
+					s/SECTION/?SECTION/;
+					$changed = 1;
+				    }
+
+				    if ( /^\s*COMMENT\s+/ ) {
+					s/COMMENT/?COMMENT/;
+					$changed = 1;
+				    } elsif ( /^\\s*COMMENT\\s*\$/ ) {
+					s/COMMENT/?COMMENT/;
+				    }
+
+				    if ( $v5_2_update ) {
+					if ( /\bA_AllowICMPs\b/ ) {
+					    s/A_AllowICMPs/AllowICMPs(A_ACCEPT)/;
+					    $changed = 1;
+					}
+
+					if ( $is_policy ) {
+					    if ( /\bA_(?:Drop|Reject)\b/ ) {
+						if ( $family == F_IPV4 ) {
+						    s/A_(?:Drop|Reject)/Broadcast(A_DROP),Multicast(A_DROP)/;
+						} else {
+						    s/A_(?:Drop|Reject)/AllowICMPS(A_ACCEPT),Broadcast(A_DROP),Multicast(A_DROP)/;
+						}
+
+						$changed = 1;
+					    } elsif ( /\b(?:Drop|Reject)\(\s*audit.*\)/ ) {
+						if ( $family == F_IPV4 ) {
+						    s/(?:Drop|Reject)\(\s*audit.*\)/Broadcast(A_DROP),Multicast(A_DROP)/;
+						} else {
+						    s/(?:Drop|Reject)\(\s*audit.*\)/AllowICMPs(A_ACCEPT),Broadcast(A_DROP),Multicast(A_DROP)/;
+						}
+
+						$changed = 1;
+					    } elsif ( /\b(?:Drop|Reject)\b/ ) {
+						if ( $family == F_IPV4 ) {
+						    s/(?:Drop|Reject)/Broadcast(DROP),Multicast(DROP)/;
+						} else {
+						    s/(?:Drop|Reject)/AllowICMPs,Broadcast(DROP),Multicast(DROP)/;
+						}
+
+						$changed = 1;
+					    }
+					} else {
+					    unless ( /;;/ ) {
+						if ( /^\s*(?:INLINE|IP6?TABLES)/ ) {
+						    s/;/;;/;
+						    $changed = 1;
+						} elsif ( /^[^#]*;\s*-[mgj]/ ) {
+						    s/;/;;/;
+						    $changed = 1;
+						}
+					    }
+
+					    if ( /\bSMTPTrap\b/ ) {
+						s/SMTPTrap/SMTPtrap/;
+						$changed = 1;
+					    }
+					}
+				    }
+				}
+
+				push @file, $_;
+			    }
+
+			    close $ifile;
+
+			    if ( $changed ) {
+				fatal_error "Can't rename $fullname to $fullname.bak" unless rename $fullname, "$fullname.bak";
+				open $ofile, '>', "$fullname" or fatal_error "Unable to open $fullname: $!";
+				print $ofile $_ for @file;
+				close $ofile;
+				progress_message3 "   File $fullname updated - old file renamed ${fullname}.bak";
 			    } else {
-				warning_message ("Unable to update file $file" );
+				progress_message "   File $file not updated -- no update required";
 			    }
 			} else {
-			    warning_message( "$file skipped (not writeable)" ) unless -d _;
+			    warning_message( "$fullname skipped (not writeable)" ) unless -d _;
 			}
 		    }
 		}
@@ -6078,9 +6188,9 @@ EOF
 # - Read the capabilities file, if any
 # - establish global hashes %params, %config , %globals and %capabilities
 #
-sub get_configuration( $$$$ ) {
+sub get_configuration( $$$ ) {
 
-    ( my ( $export, $update, $annotate ) , $checkinline ) = @_;
+    my ( $export, $update, $annotate ) = @_;
 
     $globals{EXPORT} = $export;
 
@@ -6382,7 +6492,6 @@ sub get_configuration( $$$$ ) {
     default_yes_no 'SAVE_ARPTABLES'             , '';
     default_yes_no 'STARTUP_ENABLED'            , 'Yes';
     default_yes_no 'DELAYBLACKLISTLOAD'         , '';
-    default_yes_no 'MAPOLDACTIONS'              , 'Yes';
 
     warning_message 'DELAYBLACKLISTLOAD=Yes is not supported by Shorewall ' . $globals{VERSION} if $config{DELAYBLACKLISTLOAD};
 
@@ -6438,6 +6547,7 @@ sub get_configuration( $$$$ ) {
     default_yes_no 'AUTOCOMMENT'                , 'Yes';
     default_yes_no 'MULTICAST'                  , '';
     default_yes_no 'MARK_IN_FORWARD_CHAIN'      , '';
+    default_yes_no 'RENAME_COMBINED'            , 'Yes';
 
     if ( supplied ( $val = $config{TRACK_RULES} ) ) {
 	if ( lc( $val ) eq 'file' ) {
@@ -6457,7 +6567,6 @@ sub get_configuration( $$$$ ) {
 	$origin{$_} ||= '';
     }
 	    
-    default_yes_no 'INLINE_MATCHES'             , '';
     default_yes_no 'BASIC_FILTERS'              , '';
     default_yes_no 'WORKAROUNDS'                , 'Yes';
     default_yes_no 'DOCKER'                     , '';
@@ -6490,11 +6599,14 @@ sub get_configuration( $$$$ ) {
     default_yes_no 'MANGLE_ENABLED'             , have_capability( 'MANGLE_ENABLED' ) ? 'Yes' : '';
     default_yes_no 'USE_DEFAULT_RT'             , '';
     default_yes_no 'RESTORE_DEFAULT_ROUTE'      , 'Yes';
-    default_yes_no 'AUTOMAKE'                   , '';
-    default_yes_no 'TRACK_PROVIDERS'            , '';
+    default_yes_no 'TRACK_PROVIDERS'            , 'Yes';
     default_yes_no 'BALANCE_PROVIDERS'          , $config{USE_DEFAULT_RT} ? 'Yes' : '';
     default_yes_no 'USE_NFLOG_SIZE'             , '';
 
+    if ( ( $val = ( $config{AUTOMAKE} || '' ) ) !~ /^[Rr]ecursive$/ ) {
+	default_yes_no( 'AUTOMAKE' , '' ) unless $val && $val =~ /^\d{1,2}$/;
+    }
+
     if ( $config{USE_NFLOG_SIZE} ) {
 	if ( have_capability( 'NFLOG_SIZE' ) ) {
 	    @suffixes = qw(group size threshold nlgroup cprange qthreshold);
@@ -6691,6 +6803,13 @@ sub get_configuration( $$$$ ) {
 	$config{LOG_BACKEND} = $val;
     }
 
+    if ( supplied( $val = $config{LOG_ZONE} ) ) {
+	fatal_error "Invalid LOG_ZONE setting ($val)" unless $val =~ /^(src|dst|both)$/i;
+	$config{LOG_ZONE} = lc( $val );
+    } else {
+	$config{LOG_ZONE} = 'both';
+    }
+
     warning_message "RFC1918_LOG_LEVEL=$config{RFC1918_LOG_LEVEL} ignored. The 'norfc1918' interface/host option is no longer supported" if $config{RFC1918_LOG_LEVEL};
 
     default_log_level 'SMURF_LOG_LEVEL',     '';
@@ -6867,7 +6986,7 @@ sub get_configuration( $$$$ ) {
     } else {
 	$val = numeric_value $config{OPTIMIZE};
 
-	fatal_error "Invalid OPTIMIZE value ($config{OPTIMIZE})" unless supplied( $val ) && $val >= 0 && ( $val & ~OPTIMIZE_USE_FIRST ) <= OPTIMIZE_ALL;
+	fatal_error "Invalid OPTIMIZE value ($config{OPTIMIZE})" unless supplied( $val ) && $val >= 0 && $val <= OPTIMIZE_ALL;
     }
 
     require_capability 'XMULTIPORT', 'OPTIMIZE level 16', 's' if $val & 16;
@@ -6936,7 +7055,7 @@ sub get_configuration( $$$$ ) {
 	$variables{$var} = $config{$val};
     }
 
-    convert_to_directives if $update;
+    convert_to_version_5_2 if $update;
 
     cleanup_iptables if $sillyname && ! $config{LOAD_HELPERS_ONLY};
 }

Shorewall/Perl/Shorewall/IPAddrs.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/IPAddrs.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/IPAddrs.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -60,6 +60,7 @@ our @EXPORT = ( qw( ALLIPv4
 		  decompose_net
 		  decompose_net_u32
 		  compare_nets
+		  loopback_address
 		  validate_host
 		  validate_range
 		  ip_range_explicit
@@ -98,12 +99,14 @@ our $resolve_dnsname;
 our $validate_range;
 our $validate_host;
 our $family;
+our $loopback_address;
 
 use constant { ALLIPv4             => '0.0.0.0/0' ,
 	       ALLIPv6             => '::/0' ,
 	       NILIPv4             => '0.0.0.0' ,
 	       NILIPv6             => '::' ,
 	       IPv4_MULTICAST      => '224.0.0.0/4' ,
+	       IPv4_LOOPBACK       => '127.0.0.1' ,
 	       IPv6_MULTICAST      => 'ff00::/8' ,
 	       IPv6_LINKLOCAL      => 'fe80::/10' ,
 	       IPv6_SITELOCAL      => 'feC0::/10' ,
@@ -370,6 +373,10 @@ sub rfc1918_networks() {
     @rfc1918_networks
 }
 
+sub loopback_address() {
+    $loopback_address;
+}
+
 #
 # Protocol/port validation
 #
@@ -755,6 +762,7 @@ sub initialize( $ ) {
 	$nilip            = NILIPv4;
 	@nilip            = @nilipv4;
 	$vlsm_width       = VLSMv4;
+	$loopback_address = IPv4_LOOPBACK;
 	$valid_address    = \&valid_4address;
 	$validate_address = \&validate_4address;
 	$validate_net     = \&validate_4net;
@@ -767,6 +775,7 @@ sub initialize( $ ) {
 	$nilip            = NILIPv6;
 	@nilip            = @nilipv6;
 	$vlsm_width       = VLSMv6;
+	$loopback_address = IPv6_LOOPBACK;
 	$valid_address    = \&valid_6address;
 	$validate_address = \&validate_6address;
 	$validate_net     = \&validate_6net;

Shorewall/Perl/Shorewall/Misc.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Misc.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Misc.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -667,8 +667,18 @@ sub create_docker_rules() {
 
     my $chainref = $filter_table->{FORWARD};
 
-    add_commands( $chainref, '[ -n "$g_dockeringress" ] && echo "-A FORWARD -j DOCKER-INGRESS"   >&3', );
-    add_commands( $chainref, '[ -n "$g_dockernetwork" ] && echo "-A FORWARD -j DOCKER-ISOLATION" >&3', );
+    add_commands( $chainref, '[ -n "$g_dockeringress" ] && echo "-A FORWARD -j DOCKER-INGRESS" >&3', );
+    add_commands( $chainref, '[ -n "$g_dockeruser" ]    && echo "-A FORWARD -j DOCKER-USER"    >&3', );
+    add_commands( $chainref ,
+		  '',
+		  'case "$g_dockernetwork" in',
+		  '    One)',
+		  '        echo "-A FORWARD -j DOCKER-ISOLATION" >&3',
+		  '        ;;',
+		  '    Two)',
+		  '        echo "-A FORWARD -j DOCKER-ISOLATION-STAGE-1" >&3',
+		  '        ;;',
+		  'esac' );
 
     if ( my $dockerref = known_interface('docker0') ) {
 	add_commands( $chainref, 'if [ -n "$g_docker" ]; then' );
@@ -718,7 +728,7 @@ sub add_common_rules ( $ ) {
 
     if ( $config{REJECT_ACTION} ) {
 	process_reject_action;
-	fatal_eror( "The REJECT_ACTION ($config{REJECT_ACTION}) is not terminating" ) unless terminating( $rejectref );
+	fatal_error( "The REJECT_ACTION ($config{REJECT_ACTION}) is not terminating" ) unless terminating( $rejectref );
     } else {
 	if ( have_capability( 'ADDRTYPE' ) ) {
 	    add_ijump $rejectref , j => 'DROP' , addrtype => '--src-type BROADCAST';
@@ -810,7 +820,7 @@ sub add_common_rules ( $ ) {
 		    $dbl_dst_target = $dbl_src_target;
 		}		    
 	    } elsif ( $dbl_level ) {
-		my $chainref = set_optflags( new_standard_chain( $dbl_src_target = 'dbl_log' ) , DONT_OPTIMIZE | DONT_DELETE );
+		my $chainref = set_optflags( new_standard_chain( $dbl_src_target = $dbl_dst_target = 'dbl_log' ) , DONT_OPTIMIZE | DONT_DELETE );
 
 		log_rule_limit( $dbl_level,
 				$chainref,
@@ -1714,9 +1724,9 @@ sub add_interface_jumps {
 	    add_ijump( $filter_table->{input_chain $bridge },
 		       j => $inputref ,
 		       imatch_source_dev( $interface, 1 )
-		    ) unless $input_jump_added{$interface}   || ! use_input_chain $interface, $inputref;
+		) unless $input_jump_added{$interface}   || ! use_interface_chain( $interface, 'use_input_chain' );
 
-	    unless ( $output_jump_added{$interface} || ! use_output_chain $interface, $outputref ) {
+	    unless ( $output_jump_added{$interface} || ! use_interface_chain( $interface, 'use_output_chain') ) {
 		add_ijump( $filter_table->{output_chain $bridge} ,
 			   j => $outputref ,
 			   imatch_dest_dev( $interface, 1 ) )
@@ -1725,10 +1735,10 @@ sub add_interface_jumps {
 	} else {
 	    add_ijump ( $filter_table->{FORWARD}, j => 'ACCEPT', imatch_source_dev( $interface) , imatch_dest_dev( $interface) ) unless $interfaceref->{nets} || ! $interfaceref->{options}{bridge};
 
-	    add_ijump( $filter_table->{FORWARD} , j => $forwardref , imatch_source_dev( $interface ) ) if use_forward_chain( $interface, $forwardref ) && ! $forward_jump_added{$interface}++;
-	    add_ijump( $filter_table->{INPUT}   , j => $inputref ,   imatch_source_dev( $interface ) ) if use_input_chain( $interface, $inputref )     && ! $input_jump_added{$interface}++;
+	    add_ijump( $filter_table->{FORWARD} , j => $forwardref , imatch_source_dev( $interface ) ) if use_forward_chain( $interface, $forwardref )         && ! $forward_jump_added{$interface}++;
+	    add_ijump( $filter_table->{INPUT}   , j => $inputref ,   imatch_source_dev( $interface ) ) if use_interface_chain( $interface, 'use_input_chain' ) && ! $input_jump_added{$interface}++;
 
-	    if ( use_output_chain $interface, $outputref ) {
+	    if ( use_interface_chain( $interface, 'use_output_chain' ) ) {
 		add_ijump $filter_table->{OUTPUT} , j => $outputref , imatch_dest_dev( $interface ) unless get_interface_option( $interface, 'port' ) || $output_jump_added{$interface}++;
 	    }
 	}
@@ -1917,7 +1927,7 @@ sub add_output_jumps( $$$$$$$$ ) {
     my @ipsec_out_match   = match_ipsec_out $zone , $hostref;
     my @zone_interfaces   = keys %{zone_interfaces( $zone )};
 
-    if ( @vservers || use_output_chain( $interface, $interfacechainref ) || ( @{$interfacechainref->{rules}} && ! $chain1ref ) || @zone_interfaces > 1 ) {
+    if ( @vservers || use_interface_chain( $interface, 'use_output_chain' ) || ( @{$interfacechainref->{rules}} && ! $chain1ref ) || @zone_interfaces > 1 ) {
 	#
 	# - There are vserver zones (so OUTPUT will have multiple source; or
 	# - We must use the interface output chain; or
@@ -2051,7 +2061,7 @@ sub add_input_jumps( $$$$$$$$$ ) {
     my @source            = imatch_source_net $net;
     my @ipsec_in_match    = match_ipsec_in  $zone , $hostref;
 
-    if ( @vservers || use_input_chain( $interface, $interfacechainref ) || ! $chain2 || ( @{$interfacechainref->{rules}} && ! $chain2ref ) ) {
+    if ( @vservers || use_interface_chain( $interface, 'use_input_chain' ) || ! $chain2 || ( @{$interfacechainref->{rules}} && ! $chain2ref ) ) {
 	#
 	# - There are vserver zones (so INPUT will have multiple destinations; or
 	# - We must use the interface input chain; or
@@ -2554,9 +2564,6 @@ EOF
 	        reload)
 	            mylogger kern.err "ERROR:$g_product reload failed"
 	            ;;
-	        refresh)
-	            mylogger kern.err "ERROR:$g_product refresh failed"
-	            ;;
                 enable)
                     mylogger kern.err "ERROR:$g_product 'enable $g_interface' failed"
                     ;;
@@ -2646,7 +2653,6 @@ EOF
 
         rm -f ${VARDIR}/proxyarp
     fi
-
 EOF
     } else {
 	emit <<'EOF';
@@ -2660,7 +2666,6 @@ EOF
 
         rm -f ${VARDIR}/proxyndp
     fi
-
 EOF
     }
 

Shorewall/Perl/Shorewall/Nat.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Nat.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Nat.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -37,7 +37,7 @@ use strict;
 
 our @ISA = qw(Exporter);
 our @EXPORT = qw( setup_nat setup_netmap add_addresses );
-our %EXPORT_TAGS = ( rules => [ qw ( handle_nat_rule handle_nonat_rule process_one_masq convert_masq @addresses_to_add %addresses_to_add ) ] );
+our %EXPORT_TAGS = ( rules => [ qw ( handle_nat_rule handle_nonat_rule convert_masq @addresses_to_add %addresses_to_add ) ] );
 our @EXPORT_OK = ();
 
 Exporter::export_ok_tags('rules');
@@ -587,11 +587,11 @@ EOF
 # Convert a masq file into the equivalent snat file
 #
 sub convert_masq() {
+    my $have_masq_rules;
+
     if ( my $fn = open_file( 'masq', 1, 1 ) ) {
 	my ( $snat, $fn1 ) = open_snat_for_output( $fn );
 
-	my $have_masq_rules;
-
 	directive_callback(
 	    sub ()
 	    {
@@ -647,6 +647,8 @@ sub convert_masq() {
 
 	close $snat, directive_callback( 0 );
     }
+
+    $have_masq_rules;
 }
 
 #

Shorewall/Perl/Shorewall/Proc.pm

@@ -1,5 +1,5 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Proc.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Proc.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall/Perl/Shorewall/Providers.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Providers.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Providers.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -60,7 +60,7 @@ our @routemarked_providers;
 our %routemarked_interfaces;
 our @routemarked_interfaces;
 our %provider_interfaces;
-our @load_interfaces;
+our @load_providers;
 
 our $balancing;
 our $fallback;
@@ -99,7 +99,7 @@ sub initialize( $ ) {
     %routemarked_interfaces = ();
     @routemarked_interfaces = ();
     %provider_interfaces    = ();
-    @load_interfaces        = ();
+    @load_providers         = ();
     $balancing              = 0;
     $balanced_providers     = 0;
     $fallback_providers     = 0;
@@ -161,6 +161,15 @@ sub setup_route_marking() {
 		add_ijump_extended $mangle_table->{PREROUTING} , j => $chainref,  $origin, i => $physical,     mark => "--mark 0/$mask";
 		add_ijump_extended $mangle_table->{PREROUTING} , j => $chainref1, $origin, i => "! $physical", mark => "--mark  $mark/$mask";
 		add_ijump_extended $mangle_table->{OUTPUT}     , j => $chainref2, $origin,                     mark => "--mark  $mark/$mask";
+
+		if ( have_ipsec ) {
+		    if ( have_capability( 'MARK_ANYWHERE' ) && ( my $chainref = $filter_table->{forward_chain($interface)} ) ) {
+			add_ijump_extended $chainref, j => 'CONNMARK', $origin, targetopts => "--set-mark 0${exmask}",               , state_imatch('NEW'), policy => '--dir in --pol ipsec';
+		    } elsif ( have_capability( 'MANGLE_FORWARD' ) ) {
+			add_ijump_extended $mangle_table->{FORWARD},                   j => 'CONNMARK', $origin, targetopts => "--set-mark 0${exmask}", i => $physical, state_imatch('NEW'), policy => '--dir in --pol ipsec';
+		    }
+		}
+
 		$marked_interfaces{$interface} = 1;
 	    }
 
@@ -176,16 +185,16 @@ sub setup_route_marking() {
 	add_ijump $chainref, j => 'CONNMARK', targetopts => "--save-mark --mask $mask", mark => "! --mark 0/$mask";
     }
 
-    if ( @load_interfaces ) {
+    if ( @load_providers ) {
 	my $chainref1 = new_chain 'mangle', 'balance';
 	my @match;
 
 	add_ijump $chainref,               g => $chainref1, mark => "--mark 0/$mask";
 	add_ijump $mangle_table->{OUTPUT}, j => $chainref1, state_imatch( 'NEW,RELATED' ), mark => "--mark 0/$mask";
 
-	for my $physical ( @load_interfaces ) {
+	for my $provider ( @load_providers ) {
 
-	    my $chainref2 = new_chain( 'mangle', load_chain( $physical ) );
+	    my $chainref2 = new_chain( 'mangle', load_chain( $provider ) );
 
 	    set_optflags( $chainref2, DONT_OPTIMIZE | DONT_MOVE | DONT_DELETE );
 
@@ -329,22 +338,22 @@ sub balance_default_route( $$$$ ) {
     if ( $first_default_route ) {
 	if ( $balanced_providers == 1 ) {
 	    if ( $gateway ) {
-		emit "DEFAULT_ROUTE=\"via $gateway dev $interface $realm\"";
+		emit qq(DEFAULT_ROUTE="via $gateway dev $interface $realm");
 	    } else {
-		emit "DEFAULT_ROUTE=\"dev $interface $realm\"";
+		emit qq(DEFAULT_ROUTE="dev $interface $realm");
 	    }
 	} elsif ( $gateway ) {
-	    emit "DEFAULT_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
+	    emit qq(DEFAULT_ROUTE="nexthop via $gateway dev $interface weight $weight $realm");
 	} else {
-	    emit "DEFAULT_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
+	    emit qq(DEFAULT_ROUTE="nexthop dev $interface weight $weight $realm");
 	}
 
 	$first_default_route = 0;
     } else {
 	if ( $gateway ) {
-	    emit "DEFAULT_ROUTE=\"\$DEFAULT_ROUTE nexthop via $gateway dev $interface weight $weight $realm\"";
+	    emit qq(DEFAULT_ROUTE="\$DEFAULT_ROUTE nexthop via $gateway dev $interface weight $weight $realm");
 	} else {
-	    emit "DEFAULT_ROUTE=\"\$DEFAULT_ROUTE nexthop dev $interface weight $weight $realm\"";
+	    emit qq(DEFAULT_ROUTE="\$DEFAULT_ROUTE nexthop dev $interface weight $weight $realm");
 	}
     }
 }
@@ -359,22 +368,22 @@ sub balance_fallback_route( $$$$ ) {
     if ( $first_fallback_route ) {
 	if ( $fallback_providers == 1 ) {
 	    if ( $gateway ) {
-		emit "FALLBACK_ROUTE=\"via $gateway dev $interface $realm\"";
+		emit qq(FALLBACK_ROUTE="via $gateway dev $interface $realm");
 	    } else {
-		emit "FALLBACK_ROUTE=\"dev $interface $realm\"";
+		emit qq(FALLBACK_ROUTE="dev $interface $realm");
 	    }
 	} elsif ( $gateway ) {
-	    emit "FALLBACK_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
+	    emit qq(FALLBACK_ROUTE="nexthop via $gateway dev $interface weight $weight $realm");
 	} else {
-	    emit "FALLBACK_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
+	    emit qq(FALLBACK_ROUTE="nexthop dev $interface weight $weight $realm");
 	}
 
 	$first_fallback_route = 0;
     } else {
 	if ( $gateway ) {
-	    emit "FALLBACK_ROUTE=\"\$FALLBACK_ROUTE nexthop via $gateway dev $interface weight $weight $realm\"";
+	    emit qq(FALLBACK_ROUTE="\$FALLBACK_ROUTE nexthop via $gateway dev $interface weight $weight $realm");
 	} else {
-	    emit "FALLBACK_ROUTE=\"\$FALLBACK_ROUTE nexthop dev $interface weight $weight $realm\"";
+	    emit qq(FALLBACK_ROUTE="\$FALLBACK_ROUTE nexthop dev $interface weight $weight $realm");
 	}
     }
 }
@@ -437,7 +446,7 @@ sub process_a_provider( $ ) {
     fatal_error 'NAME must be specified' if $table eq '-';
 
     unless ( $pseudo ) {
-	fatal_error "Invalid Provider Name ($table)" unless $table =~ /^[\w]+$/;
+	fatal_error "Invalid Provider Name ($table)" unless $table =~ /^[A-Za-z][\w]*$/;
 
 	my $num = numeric_value $number;
 
@@ -627,6 +636,7 @@ sub process_a_provider( $ ) {
     }
 
     fatal_error "A provider interface must have at least one associated zone" unless $tproxy || %{interface_zones($interface)};
+    fatal_error "An interface supporting multiple providers may not be optional" if $shared && $optional;
 
     unless ( $pseudo ) {
 	if ( $local ) {
@@ -770,7 +780,7 @@ sub process_a_provider( $ ) {
 	push @routemarked_providers, $providers{$table};
     }
 
-    push @load_interfaces, $physical if $load;
+    push @load_providers, $table if $load;
 
     push @providers, $table;
 
@@ -867,7 +877,7 @@ sub add_a_provider( $$ ) {
 	    }
 
 	    emit( "run_ip route replace default via $gateway src $address dev $physical ${mtu}table $id $realm" );
-	    emit( qq( echo "\$IP route del default via $gateway src $address dev $physical ${mtu}table $id $realm > /dev/null 2>&1"  >> \${VARDIR}/undo_${table}_routing) );
+	    emit( qq(echo "\$IP route del default via $gateway src $address dev $physical ${mtu}table $id $realm > /dev/null 2>&1"  >> \${VARDIR}/undo_${table}_routing) );
 	}
 
 	if ( ! $noautosrc ) {
@@ -876,7 +886,8 @@ sub add_a_provider( $$ ) {
 		emit( "run_ip rule add from $address pref 20000 table $id" ,
 		      "echo \"\$IP -$family rule del from $address pref 20000> /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing" );
 	    } else {
-		emit  ( "find_interface_addresses $physical | while read address; do",
+		emit  ( '',
+			"find_interface_addresses $physical | while read address; do",
 			"    qt \$IP -$family rule del from \$address",
 			"    run_ip rule add from \$address pref 20000 table $id",
 			"    echo \"\$IP -$family rule del from \$address pref 20000 > /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing",
@@ -931,8 +942,9 @@ sub add_a_provider( $$ ) {
 	}
     }
 
-    emit( "echo $load > \${VARDIR}/${physical}_load",
-	  'echo ' . in_hex( $mark ) . '/' . in_hex( $globals{PROVIDER_MASK} ) . " > \${VARDIR}/${physical}_mark" ) if $load;
+    emit( "echo $load > \${VARDIR}/${table}_load",
+	  'echo ' . in_hex( $mark ) . '/' . in_hex( $globals{PROVIDER_MASK} ) . " > \${VARDIR}/${table}_mark",
+	  "echo $physical > \${VARDIR}/${table}_interface" ) if $load;
 
     emit( '',
 	  "cat <<EOF >> \${VARDIR}/undo_${table}_routing" );
@@ -1087,7 +1099,7 @@ CEOF
 	    $weight = 1;
 	}
 
-	emit ( "distribute_load $maxload @load_interfaces" ) if $load;
+	emit ( "distribute_load $maxload @load_providers" ) if $load;
 
 	unless ( $shared ) {
 	    emit( "setup_${dev}_tc" ) if $tcdevices->{$interface};
@@ -1234,14 +1246,14 @@ CEOF
 	}
 
 	emit ( '',
-	       "distribute_load $maxload @load_interfaces" ) if $load;
+	       "distribute_load $maxload @load_providers" ) if $load;
 
 	if ( $persistent ) {
 	    emit ( '',
 		   'if [ $COMMAND = disable ]; then',
 		   "    do_persistent_${what}_${table}",
 		   "else",
-		   "    echo 1 > \${VARDIR}/${physical}_disabled\n",
+		   "    echo 1 > \${VARDIR}/${physical}_disabled",
 		   "fi\n",
 		 );
 	}
@@ -1584,7 +1596,8 @@ sub finish_providers() {
 	}
 
 	if ( $config{USE_DEFAULT_RT} ) {
-	    emit  ( "    while qt \$IP -$family route del default table $main; do",
+	    emit  ( '',
+		    "    while qt \$IP -$family route del default table $main; do",
 		    '        true',
 		    '    done',
 		    ''
@@ -1604,7 +1617,7 @@ sub finish_providers() {
 	emit(   'fi',
 		'' );
     } else {
-	if ( ( $fallback || @load_interfaces ) && $config{USE_DEFAULT_RT} ) {
+	if ( ( $fallback || @load_providers ) && $config{USE_DEFAULT_RT} ) {
 	    emit  ( q(#),
 		    q(# Delete any default routes in the 'main' table),
 		    q(#),
@@ -1730,7 +1743,7 @@ sub process_providers( $ ) {
 
     add_a_provider( $providers{$_}, $tcdevices ) for @providers;
 
-    emit << 'EOF';;
+    emithd << 'EOF';;
 
 #
 # Enable an optional provider
@@ -1776,12 +1789,11 @@ EOF
     pop_indent;
     pop_indent;
 
-    emit << 'EOF';;
+    emithd << 'EOF';;
         *)
             startup_error "$g_interface is not an optional provider or interface"
             ;;
     esac
-
 }
 
 #
@@ -1885,38 +1897,38 @@ sub setup_providers() {
 
 	start_providers;
 
-	setup_null_routing if $config{NULL_ROUTE_RFC1918};
+	setup_null_routing, emit '' if $config{NULL_ROUTE_RFC1918};
 
-	emit '';
-
-	emit "start_$providers{$_}->{what}_$_" for @providers;
-
-	emit '';
+	if ( @providers ) {
+	    emit "start_$providers{$_}->{what}_$_" for @providers;
+	    emit '';
+	}
 
 	finish_providers;
 
 	emit "\nrun_ip route flush cache";
 
 	pop_indent;
-	emit "fi\n";
+	emit 'fi';
 
-	setup_route_marking if @routemarked_interfaces || @load_interfaces;
+	setup_route_marking if @routemarked_interfaces || @load_providers;
     } else {
 	emit "\nif [ -z \"\$g_noroutes\" ]; then";
 
 	push_indent;
 
+	emit "undo_routing";
+	emit "restore_default_route $config{USE_DEFAULT_RT}";
+
 	if ( $pseudoproviders ) {
 	    emit '';
 	    emit "start_$providers{$_}->{what}_$_" for @providers;
 	}
 
-	emit "\nundo_routing";
-	emit "restore_default_route $config{USE_DEFAULT_RT}";
-
 	my $standard_routes = @{$providers{main}{routes}} || @{$providers{default}{routes}};
 
 	if ( $config{NULL_ROUTE_RFC1918} ) {
+	    emit '';
 	    setup_null_routing;
 	    emit "\nrun_ip route flush cache" unless $standard_routes;
 	}
@@ -1936,7 +1948,7 @@ sub setup_providers() {
 
 	pop_indent;
 
-	emit "fi\n";
+	emit 'fi';
     }
 }
 
@@ -2186,17 +2198,13 @@ sub provider_realm( $ ) {
 }
 
 #
-# This function is called by the compiler when it is generating the detect_configuration() function.
-# The function calls Shorewall::Zones::verify_required_interfaces then emits code to set the
-# ..._IS_USABLE interface variables appropriately for the  optional interfaces
+# Perform processing related to optional interfaces. Returns true if there are optional interfaces.
+
 #
-# Returns true if there were required or optional interfaces
-#
-sub handle_optional_interfaces( $ ) {
+sub handle_optional_interfaces() {
 
     my @interfaces;
     my $wildcards;
-
     #
     # First do the provider interfacess. Those that are real providers will never have wildcard physical
     # names but they might derive from wildcard interface entries. Optional interfaces which do not have
@@ -2220,10 +2228,6 @@ sub handle_optional_interfaces( $ ) {
 
     if ( @interfaces ) {
 	my $require     = $config{REQUIRE_INTERFACE};
-	my $gencase     = shift;
-
-	verify_required_interfaces( $gencase );
-	emit '' if $gencase;
 
 	emit( 'HAVE_INTERFACE=', '' ) if $require;
 	#
@@ -2366,7 +2370,7 @@ sub handle_optional_interfaces( $ ) {
 	    emit( '',
 		  'if [ -z "$HAVE_INTERFACE" ]; then' ,
 		  '    case "$COMMAND" in',
-		  '        start|reload|restore|refresh)'
+		  '        start|reload|restore)'
 		);
 
 	    if ( $family == F_IPV4 ) {
@@ -2387,8 +2391,6 @@ sub handle_optional_interfaces( $ ) {
 
 	return 1;
     }
-
-    verify_required_interfaces( shift );
 }
 
 #
@@ -2485,7 +2487,7 @@ sub handle_stickiness( $ ) {
 	}
     }
 
-    if ( @routemarked_providers || @load_interfaces ) {
+    if ( @routemarked_providers || @load_providers ) {
 	delete_jumps $mangle_table->{PREROUTING}, $setstickyref unless @{$setstickyref->{rules}};
 	delete_jumps $mangle_table->{OUTPUT},     $setstickoref unless @{$setstickoref->{rules}};
     }
@@ -2493,9 +2495,9 @@ sub handle_stickiness( $ ) {
 
 sub setup_load_distribution() {
     emit ( '',
-	   "distribute_load $maxload @load_interfaces" ,
+	   "distribute_load $maxload @load_providers" ,
 	   ''
-	 ) if @load_interfaces;
+	 ) if @load_providers;
 }
 
 1;

Shorewall/Perl/Shorewall/Proxyarp.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Proxyarp.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Proxyarp.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -96,6 +96,7 @@ sub setup_one_proxy_arp( $$$$$$$ ) {
     }
 
     emit ( "run_ip neigh add proxy $address nud permanent dev $extphy" ,
+	   '' ,
 	   qq(progress_message "   Host $address connected to $interface added to $proto on $extphy"\n) );
 
     push @proxyarp, "$address $interface $external $haveroute";

Shorewall/Perl/Shorewall/Raw.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Raw.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Raw.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2009-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2009-2018 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -91,7 +91,7 @@ sub process_conntrack_rule( $$$$$$$$$$ ) {
 
     my $disposition = $action;
     my $exception_rule = '';
-    my $rule = do_proto( $proto, $ports, $sports ) . do_user ( $user ) . do_condition( $switch , $chainref->{name} );
+
     my $level = '';
 
     if ( $action =~ /^(?:NFLOG|ULOG)/ ) {
@@ -138,6 +138,14 @@ sub process_conntrack_rule( $$$$$$$$$$ ) {
 
 	require_capability 'CT_TARGET', 'CT entries in the conntrack file', '';
 
+	if ( $proto ne '-' ) {
+	    if ( $proto =~ s/:all$// ) {
+		fatal_error '":all" may only be used with TCP' unless resolve_proto( $proto ) == TCP;
+	    } else {
+		$proto = TCP . ':syn' if $proto !~ /:syn/ && resolve_proto( $proto ) == TCP;
+	    }
+	}
+
 	if ( $option eq 'notrack' ) {
 	    fatal_error "Invalid conntrack ACTION ( $action )" if supplied $args;
 	    $action = 'CT --notrack';
@@ -199,7 +207,9 @@ sub process_conntrack_rule( $$$$$$$$$$ ) {
     expand_rule( $chainref ,
 		 $restriction ,
 		 '',
-		 $rule,
+		 do_proto( $proto, $ports, $sports ) . 
+		 do_user ( $user ) . 
+		 do_condition( $switch , $chainref->{name} ),
 		 $source ,
 		 $dest ,
 		 '' ,

Shorewall/Perl/Shorewall/Rules.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Rules.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Rules.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -112,6 +112,13 @@ our %section_functions = ( ALL_SECTION ,        \&rules_chain,
 			   UNTRACKED_SECTION,   \&untracked_chain,
 			   NEW_SECTION,         \&rules_chain );
 
+our %log_functions = ( ALL_SECTION ,         \&rules_log ,
+		       BLACKLIST_SECTION ,   \&blacklist_log ,
+		       ESTABLISHED_SECTION , \&established_log ,
+		       RELATED_SECTION ,     \&related_log ,
+		       INVALID_SECTION ,     \&invalid_log ,
+		       UNTRACKED_SECTION ,   \&untracked_log ,
+		       NEW_SECTION ,         \&rules_log );
 #
 # Section => STATE map - initialized in process_rules().
 #
@@ -403,8 +410,8 @@ sub initialize( $ ) {
 #
 # Create a rules chain
 #
-sub new_rules_chain( $ ) {
-    my $chainref = new_chain( 'filter', $_[0] );
+sub new_rules_chain( $$ ) {
+    my $chainref = new_chain( 'filter', &rules_chain( @_ ), &rules_log( @_ ) );
 
     if ( $config{FASTACCEPT} ) {
 	if ( $globals{RELATED_TARGET} eq 'ACCEPT' && ! $config{RELATED_LOG_LEVEL} ) {
@@ -445,7 +452,7 @@ sub new_policy_chain($$$$$)
 {
     my ($source, $dest, $policy, $provisional, $audit) = @_;
 
-    my $chainref = new_rules_chain( rules_chain( ${source}, ${dest} ) );
+    my $chainref = new_rules_chain( ${source}, ${dest} );
 
     convert_to_policy_chain( $chainref, $source, $dest, $policy, $provisional, $audit );
 
@@ -455,9 +462,11 @@ sub new_policy_chain($$$$$)
 #
 # Set the passed chain's policychain and policy to the passed values.
 #
-sub set_policy_chain($$$$$$)
+sub set_policy_chain($$$$$)
 {
-    my ( $chain, $source, $dest, $polchainref, $policy, $intrazone ) = @_;
+    my ( $source, $dest, $polchainref, $policy, $intrazone ) = @_;
+
+    my $chain = rules_chain( $source, $dest );
 
     my $chainref = $filter_table->{$chain};
 
@@ -467,7 +476,7 @@ sub set_policy_chain($$$$$$)
 	    $chainref->{provisional} = '';
 	}
     } else {
-	$chainref = new_rules_chain $chain;
+	$chainref = new_rules_chain( $source, $dest );
     }
 
     unless ( $chainref->{policychain} ) {
@@ -483,6 +492,7 @@ sub set_policy_chain($$$$$$)
 	    if ( defined $polchainref->{synparams} ) {
 		$chainref->{synparams}   = $polchainref->{synparams};
 		$chainref->{synchain}    = $polchainref->{synchain};
+		$chainref->{synlog}      = $polchainref->{synlog};
 	    }
 
 	    $chainref->{pactions}    = $polchainref->{pactions} || [];
@@ -580,7 +590,7 @@ sub process_policy_actions( $$$ ) {
 	    for my $paction ( split_list3( $pactions, 'Policy Action' ) ) {
 		my ( $action, $level, $remainder ) = split( /:/, $paction, 3 );
 
-		fatal_error "Invalid policy action ($paction:$level:$remainder)" if defined $remainder;
+		fatal_error "Invalid policy action ($paction)" if defined $remainder;
 
 		push @pactions, process_policy_action( $originalpolicy, $policy, $action, $level );
 	    }
@@ -743,7 +753,8 @@ sub process_a_policy1($$$$$$$) {
 	$value  = do_ratelimit $synparams, 'ACCEPT'  if $synparams ne '';
 	$value .= do_connlimit $connlimit            if $connlimit ne '';
 	$chainref->{synparams} = $value;
-	$chainref->{synchain}  = $chain
+	$chainref->{synchain}  = $chain;
+	$chainref->{synlog}    = '@' . $chainref->{logname};
     }
 
     $chainref->{pactions} = $pactionref;
@@ -753,19 +764,19 @@ sub process_a_policy1($$$$$$$) {
 	if ( $serverwild ) {
 	    for my $zone ( @zonelist ) {
 		for my $zone1 ( @zonelist ) {
-		    set_policy_chain rules_chain( ${zone}, ${zone1} ), $zone, $zone1, $chainref, $policy, $intrazone;
+		    set_policy_chain $zone, $zone1, $chainref, $policy, $intrazone;
 		    print_policy $zone, $zone1, $originalpolicy, $chain;
 		}
 	    }
 	} else {
 	    for my $zone ( all_zones ) {
-		set_policy_chain rules_chain( ${zone}, ${server} ), $zone, $server, $chainref, $policy, $intrazone;
+		set_policy_chain $zone, $server, $chainref, $policy, $intrazone;
 		print_policy $zone, $server, $originalpolicy, $chain;
 	    }
 	}
     } elsif ( $serverwild ) {
 	for my $zone ( @zonelist ) {
-	    set_policy_chain rules_chain( ${client}, ${zone} ), $client, $zone, $chainref, $policy, $intrazone;
+	    set_policy_chain $client, $zone, $chainref, $policy, $intrazone;
 	    print_policy $client, $zone, $originalpolicy, $chain;
 	}
     } else {
@@ -832,6 +843,8 @@ sub save_policies() {
     }
 }
 
+sub ensure_rules_chain( $$ );
+
 #
 # Process the policy file
 #
@@ -881,19 +894,15 @@ sub process_policies()
 	if ( $type == LOCAL ) {
 	    for my $zone1 ( off_firewall_zones ) {
 		unless ( $zone eq $zone1 ) {
-		    my $name  = rules_chain( $zone,  $zone1 );
-		    my $name1 = rules_chain( $zone1, $zone  );
-		    set_policy_chain( $name,  $zone,  $zone1, ensure_rules_chain( $name  ), 'NONE', 0 );
-		    set_policy_chain( $name1, $zone1, $zone,  ensure_rules_chain( $name1 ), 'NONE', 0 );
+		    set_policy_chain( $zone,  $zone1, ensure_rules_chain( $zone, $zone1  ), 'NONE', 0 );
+		    set_policy_chain( $zone1, $zone,  ensure_rules_chain( $zone1, $zone ), 'NONE', 0 );
 		}
 	    }
 	} elsif ( $type == LOOPBACK ) {
 	    for my $zone1 ( off_firewall_zones ) {
 		unless ( $zone eq $zone1 || zone_type( $zone1 ) == LOOPBACK ) {
-		    my $name  = rules_chain( $zone,  $zone1 );
-		    my $name1 = rules_chain( $zone1, $zone  );
-		    set_policy_chain( $name,  $zone,  $zone1, ensure_rules_chain( $name  ), 'NONE', 0 );
-		    set_policy_chain( $name1, $zone1, $zone,  ensure_rules_chain( $name1 ), 'NONE', 0 );
+		    set_policy_chain( $zone,  $zone1, ensure_rules_chain( $zone, $zone1  ), 'NONE', 0 );
+		    set_policy_chain( $zone1, $zone,  ensure_rules_chain( $zone1, $zone ), 'NONE', 0 );
 		}
 	    }
 	}
@@ -953,13 +962,9 @@ sub add_policy_rules( $$$$$ ) {
     my ( $chainref , $target, $loglevel, $pactions, $dropmulticast ) = @_;
 
     unless ( $target eq 'NONE' ) {
-	my @pactions;
-
-	@pactions = @$pactions;
-
 	add_ijump $chainref, j => 'RETURN', d => '224.0.0.0/4' if $dropmulticast && $target ne 'CONTINUE' && $target ne 'ACCEPT';
 
-	for my $paction ( @pactions ) {
+	for my $paction ( @$pactions ) {
 	    my ( $action ) = split ':', $paction;
 
 	    if ( ( $targets{$action} || 0 ) & ACTION ) {
@@ -1005,7 +1010,7 @@ sub add_policy_rules( $$$$$ ) {
 	}
  
 	log_rule $loglevel , $chainref , $target , '' if $loglevel ne '';
-	fatal_error "Null target in policy_rules()" unless $target;
+	assert( $target );
 
 	if ( $target eq 'BLACKLIST' ) {
 	    my ( $dbl_type, $dbl_ipset, $dbl_level, $dbl_tag ) = split( ':', $config{DYNAMIC_BLACKLIST} );
@@ -1066,7 +1071,7 @@ sub complete_policy_chain( $$$ ) { #Chainref, Source Zone, Destination Zone
     progress_message_nocompress "   Policy $policy from $_[1] to $_[2] using chain $chainref->{name}";
 }
 
-sub ensure_rules_chain( $ );
+sub finish_chain_sections( $ );
 
 #
 # Finish all policy Chains
@@ -1080,7 +1085,7 @@ sub complete_policy_chains() {
 	    my $provisional = $chainref->{provisional};
 	    my $defaults    = $chainref->{pactions};
 	    my $name        = $chainref->{name};
-	    my $synparms    = $chainref->{synparms};
+	    my $synparams   = $chainref->{synparams};
 
 	    unless ( $chainref->{referenced} || $provisional || $policy eq 'CONTINUE' ) {
 		if ( $config{OPTIMIZE} & 2 ) {
@@ -1090,13 +1095,13 @@ sub complete_policy_chains() {
 		    # is a single jump. Generate_matrix() will just use the policy target when
 		    # needed.
 		    #
-		    ensure_rules_chain $name if ( @$defaults         ||
-						  $loglevel          ||
-						  $synparms          ||
-						  $config{MULTICAST} ||
-						  ! ( $policy eq 'ACCEPT' || $config{FASTACCEPT} ) );
+		    finish_chain_sections( $chainref ) if ( @$defaults         ||
+							    $loglevel          ||
+							    $synparams         ||
+							    $config{MULTICAST} ||
+							    ! ( $policy eq 'ACCEPT' || $config{FASTACCEPT} ) );
 		} else {
-		    ensure_rules_chain $name;
+		    finish_chain_sections( $chainref );
 		}
 	    }
 
@@ -1153,13 +1158,14 @@ sub setup_syn_flood_chains() {
 	my $limit = $chainref->{synparams};
 	if ( $limit && ! $filter_table->{syn_flood_chain $chainref} ) {
 	    my $level = $chainref->{loglevel};
-	    my $synchainref = @zones > 1 ?
-		    new_chain 'filter' , syn_flood_chain $chainref :
-		    new_chain( 'filter' , '@' . $chainref->{name} );
+	    my $synchainref =
+		@zones > 1 ?
+		new_chain( 'filter' , syn_flood_chain $chainref , $chainref->{synlog} ) :
+		new_chain( 'filter' , '@' . $chainref->{name}   , '@' . $chainref->{logname} );
 	    add_rule $synchainref , "${limit}-j RETURN";
 	    log_irule_limit( $level ,
 			     $synchainref ,
-			     $chainref->{name} ,
+			     $synchainref->{logname} ,
 			     'DROP',
 			     @{$globals{LOGILIMIT}} ? $globals{LOGILIMIT} : [ limit => "--limit 5/min --limit-burst 5" ] ,
 			    '' ,
@@ -1226,12 +1232,12 @@ sub finish_chain_section ($$$) {
 		    if ( $twochains ) {
 			$chain2ref = $chainref;
 		    } else {
-			$chain2ref = new_chain( 'filter', "${char}$chainref->{name}" );
+			$chain2ref = new_chain( 'filter', "${char}$chainref->{name}" , "${char}$chainref->{logname}" );
 		    }
 
 		    log_rule_limit( $level,
 				    $chain2ref,
-				    $chain2ref->{name},
+				    $chain2ref->{logname},
 				    uc $target,
 				    $globals{LOGLIMIT},
 				    $tag ,
@@ -1310,20 +1316,9 @@ sub finish_chain_section ($$$) {
     pop_comment( $save_comment );
 }
 
-#
-# Create a rules chain if necessary and populate it with the appropriate ESTABLISHED,RELATED rule(s) and perform SYN rate limiting.
-#
-# Return a reference to the chain's table entry.
-#
-sub ensure_rules_chain( $ )
-{
-    my ($chain) = @_;
+sub finish_chain_sections( $ ) {
+    my ( $chainref ) = @_;
 
-    my $chainref = $filter_table->{$chain};
-
-    $chainref = new_rules_chain( $chain ) unless $chainref;
-
-    unless ( $chainref->{referenced} ) {
 	if ( $section & ( NEW_SECTION | POLICYACTION_SECTION ) ) {
 	    finish_chain_section $chainref , $chainref, 'ESTABLISHED,RELATED,INVALID,UNTRACKED';
 	} elsif ( $section == UNTRACKED_SECTION ) {
@@ -1335,7 +1330,24 @@ sub ensure_rules_chain( $ )
 	}
 
 	$chainref->{referenced} = 1;
-    }
+}
+ 
+#
+# Create a rules chain if necessary and populate it with the appropriate ESTABLISHED,RELATED rule(s) and perform SYN rate limiting.
+#
+# Return a reference to the chain's table entry.
+#
+sub ensure_rules_chain( $$ )
+{
+    my ($source, $dest) = @_;
+
+    my $chain = rules_chain( $source, $dest );
+
+    my $chainref = $filter_table->{$chain};
+
+    $chainref = new_rules_chain( $source, $dest ) unless $chainref;
+
+    finish_chain_sections( $chainref ) unless $chainref->{referenced};
 
     $chainref;
 }
@@ -1447,7 +1459,7 @@ sub new_action( $$$$$$ ) {
 
     my ( $action , $type, $options , $actionfile , $state, $proto ) = @_;
 
-    fatal_error "Invalid action name($action)" if reserved_name( $action );
+    fatal_error "Reserved action name ($action)" if reserved_name( $action );
 
     $actions{$action} = { file => $actionfile, actchain => '' , type => $type, options => $options , state => $state, proto => $proto };
 
@@ -1457,11 +1469,7 @@ sub new_action( $$$$$$ ) {
 #
 # Create and record a log action chain -- Log action chains have names
 # that are formed from the action name by prepending a "%" and appending
-# a 1- or 2-digit sequence number. In the functions that follow,
-# the $chain, $level and $tag variables serve as arguments to the user's
-# exit. We call the exit corresponding to the name of the action but we
-# set $chain to the name of the iptables chain where rules are to be added.
-# Similarly, $level and $tag contain the log level and log tag respectively.
+# a 1- or 2-digit sequence number.
 #
 # The maximum length of a chain name is 30 characters -- since the log
 # action chain name is 2-3 characters longer than the base chain name,
@@ -1722,34 +1730,6 @@ sub isolate_basic_target( $ ) {
     $target =~ /^(\w+)[(].*[)]$/ ? $1 : $target;
 }
 
-#
-# Map pre-3.0 actions to the corresponding Macro invocation
-#
-
-sub find_old_action ( $$$ ) {
-    my ( $target, $macro, $param ) = @_;
-
-    if ( my $actiontype = find_macro( $macro ) ) {
-	( $macro, $actiontype , $param );
-    } else {
-	( $target, 0, '' );
-    }
-}
-
-sub map_old_actions( $ ) {
-    my $target = shift;
-
-    if ( $target =~ /^Allow(.*)$/ ) {
-	find_old_action( $target, $1, 'ACCEPT' );
-    } elsif ( $target =~ /^Drop(.*)$/ ) {
-	find_old_action( $target, $1, 'DROP' );
-    } elsif ( $target = /^Reject(.*)$/ ) {
-	find_old_action( $target, $1, 'REJECT' );
-    } else {
-	( $target, 0, '' );
-    }
-}
-
 sub process_rule ( $$$$$$$$$$$$$$$$$$$$ );
 sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ );
 sub process_snat1( $$$$$$$$$$$$ );
@@ -2638,10 +2618,6 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
     #
     $actiontype = $targets{$basictarget} || find_macro( $basictarget );
 
-    if ( $config{ MAPOLDACTIONS } ) {
-	( $basictarget, $actiontype , $param ) = map_old_actions( $basictarget ) unless $actiontype || supplied $param;
-    }
-
     fatal_error "Unknown ACTION ($action)" unless $actiontype;
 
     $usergenerated = $actiontype & IPTABLES;
@@ -2805,7 +2781,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	      LOG => sub { fatal_error 'LOG requires a log level' unless supplied $loglevel; } ,
 
 	      HELPER => sub { 
-		  fatal_error "HELPER requires require that the helper be specified in the HELPER column" if $helper eq '-';
+		  fatal_error "HELPER requires that a helper be specified in the HELPER column" if $helper eq '-';
 		  fatal_error "HELPER rules may only appear in the NEW section" unless $section == NEW_SECTION;
 		  $action = ''; } ,
 
@@ -3007,7 +2983,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	#
 	# Mark the chain as referenced and add appropriate rules from earlier sections.
 	#
-	$chainref = ensure_rules_chain $chain;
+	$chainref = ensure_rules_chain ${sourcezone}, ${destzone};
 	#
 	# Handle rules in the BLACKLIST, ESTABLISHED, RELATED, INVALID and UNTRACKED sections
 	#
@@ -3017,7 +2993,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 
 	    unless ( $auxref ) {
 		my $save_comment = push_comment;
-		$auxref = new_chain 'filter', $auxchain;
+		$auxref = new_chain 'filter', $auxchain, $log_functions{$section}->( $sourcezone, $destzone );
 		$auxref->{blacklistsection} = 1 if $blacklist;
 
 		add_ijump( $chainref, j => $auxref, state_imatch( $section_states{$section} ) );
@@ -3161,13 +3137,14 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
     if ( $actiontype & ( NATRULE | NONAT ) && ! ( $actiontype & NATONLY ) ) {
 	#
 	# Either a DNAT, REDIRECT or ACCEPT+ rule or an Action with NAT;
-	# don't apply rate limiting twice
 	#
 	$rule .= join( '',
 		       do_proto($proto, $ports, $sports),
+		       do_ratelimit( $ratelimit, 'ACCEPT' ),
 		       do_user( $user ) ,
 		       do_test( $mark , $globals{TC_MASK} ) ,
 		       do_connlimit( $connlimit ),
+		       do_ratelimit( $ratelimit, 'ACCEPT' ),
 		       do_time( $time ) ,
 		       do_headers( $headers ) ,
 		       do_condition( $condition , $chain ) ,
@@ -3263,12 +3240,12 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	#   - the destination IP will be the server IP   ($dest)  -- also done above
 	#   - there will be no log level (we log NAT rules in the nat table rather than in the filter table).
 	#   - the target will be ACCEPT.
+	#   - don't apply rate limiting twice
 	#
 	unless ( $actiontype & NATONLY ) {
 	    $rule = join( '',
 			  $matches,
 			  do_proto( $proto, $ports, $sports ),
-			  do_ratelimit( $ratelimit, 'ACCEPT' ),
 			  do_user $user,
 			  do_test( $mark , $globals{TC_MASK} ),
 			  do_condition( $condition , $chain ),
@@ -4101,6 +4078,10 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 	O => OUTPUT,
 	T => POSTROUTING,
 	R => REALPREROUTING,
+	NP => REALPREROUTING,
+	NI => REALINPUT,
+	NO => REALOUTPUT,
+	NT => REALPOSTROUTING
 	);
 
     my %chainlabels = ( 1  => 'PREROUTING',
@@ -4109,14 +4090,17 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 			8  => 'OUTPUT',
 			16 => 'POSTROUTING' );
 
-    my %chainnames = ( 1   => 'tcpre',
-		       2   => 'tcin',
-		       4   => 'tcfor',
-		       8   => 'tcout',
-		       16  => 'tcpost',
-		       32  => 'sticky',
-		       64  => 'sticko',
-		       128 => 'PREROUTING',
+    my %chainnames = ( 1    => 'tcpre',
+		       2    => 'tcin',
+		       4    => 'tcfor',
+		       8    => 'tcout',
+		       16   => 'tcpost',
+		       32   => 'sticky',
+		       64   => 'sticko',
+		       128  => 'PREROUTING',
+		       256  => 'INPUT',
+		       512  => 'OUTPUT',
+		       1024 => 'POSTROUTING',
 	);
 
     my $inchain        = defined $chainref;
@@ -4140,6 +4124,8 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
     my $actiontype;
     my $commandref;
     my $prerule        = '';
+    my $table          = 'mangle';
+    my $tabletype      = MANGLE_TABLE;
     #
     # Subroutine for handling MARK and CONNMARK. We use an enclosure so as to keep visibility of the
     # function's local variables without making them static. process_mangle_rule1() is called
@@ -4181,7 +4167,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 
 	    $option ||= ( $and_or eq '|' ? '--or-mark' : $and_or ? '--and-mark' : '--set-mark' );
 
-	    my $chainref = ensure_chain( 'mangle', $chain = $chainnames{$chain} );
+	    my $chainref = ensure_chain( $table, $chain = $chainnames{$chain} );
 
 	    $restriction |= $chainref->{restriction};
 
@@ -4500,7 +4486,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 		my ( $tgt,  $options ) = split( ' ', $params, 2 );
 		my $target_type = $builtin_target{$tgt};
 		fatal_error "Unknown target ($tgt)" unless $target_type;
-		fatal_error "The $tgt TARGET is not allowed in the mangle table" unless $target_type & MANGLE_TABLE;
+		fatal_error "The $tgt TARGET is not allowed in the mangle table" unless $target_type & $tabletype;
 		$target        = $params;
 		$usergenerated = 1;
 	    },
@@ -4516,7 +4502,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 		my ( $tgt,  $options ) = split( ' ', $params, 2 );
 		my $target_type = $builtin_target{$tgt};
 		fatal_error "Unknown target ($tgt)" unless $target_type;
-		fatal_error "The $tgt TARGET is not allowed in the mangle table" unless $target_type & MANGLE_TABLE;
+		fatal_error "The $tgt TARGET is not allowed in the mangle table" unless $target_type & $tabletype;
 		$target        = $params;
 		$usergenerated = 1;
 	    },
@@ -4588,7 +4574,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 
 	RESTORE    => {
 	    defaultchain   => 0,
-	    allowedchains  => PREROUTING | INPUT | FORWARD | OUTPUT | POSTROUTING,
+	    allowedchains  => PREROUTING | INPUT | FORWARD | OUTPUT | POSTROUTING | REALPREROUTING | REALINPUT | REALOUTPUT | REALPOSTROUTING,
 	    minparams      => 0,
 	    maxparams      => 1,
 	    function       => sub () {
@@ -4624,7 +4610,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 
 	SAVE       => {
 	    defaultchain   => 0,
-	    allowedchains  => PREROUTING | INPUT | FORWARD | OUTPUT | POSTROUTING,
+	    allowedchains  => PREROUTING | INPUT | FORWARD | OUTPUT | POSTROUTING | REALPREROUTING | REALINPUT | REALOUTPUT | REALPOSTROUTING,
 	    minparams      => 0,
 	    maxparams      => 1,
 	    function       => sub () {
@@ -4870,6 +4856,14 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 	fatal_error "A chain designator may not be specified in an action body" if $inaction;
 	my $temp = $designators{$designator};
 	fatal_error "Invalid chain designator ( $designator )" unless $temp;
+
+	if ( $designator =~ /^N/ ) {
+	    fatal_error "Only MARK, CONNMARK, SAVE and RESTORE may be used in the nat table" unless $cmd =~ /^(?:(?:(?:CONN)MARK)|SAVE|RESTORE)[(]?/;
+	    require_capability('MARK_ANYWHERE', "The $designator designator", 's');
+	    $table = 'nat';
+	    $tabletype = NAT_TABLE;
+	}
+
 	$designator = $temp;
     }
 
@@ -4902,12 +4896,21 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 
     if ( $source ne '-' ) {
 	if ( $source eq $fw ) {
-	    fatal_error 'Rules with SOURCE $FW must use the OUTPUT chain' if $designator && $designator != OUTPUT;
-	    $chain = OUTPUT;
+	    if ( $designator ) {
+		fatal_error 'Rules with SOURCE $FW must use the OUTPUT chain' unless $designator & ( OUTPUT | REALOUTPUT );
+		$chain = $designator;
+	    } else {
+		$chain = OUTPUT;
+	    }
+
 	    $source = '-';
 	} elsif ( $source =~ s/^($fw):// ) {
-	    fatal_error 'Rules with SOURCE $FW must use the OUTPUT chain' if $designator && $designator != OUTPUT;
-	    $chain = OUTPUT;
+	    if ( $designator ) {
+		fatal_error 'Rules with SOURCE $FW must use the OUTPUT chain' unless $designator & ( OUTPUT | REALOUTPUT );
+		$chain = $designator;
+	    } else {
+		$chain = OUTPUT;
+	    }
 	}
     }
 
@@ -4977,11 +4980,11 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 	} else {
 	    $resolve_chain->();
 	    fatal_error "$cmd rules are not allowed in the $chainlabels{$chain} chain" unless $commandref->{allowedchains} & $chain;
-	    unless ( $chain == OUTPUT || $chain == POSTROUTING  ) {
+	    unless ( $chain & ( OUTPUT | POSTROUTING | REALOUTPUT | REALPOSTROUTING ) ) {
 		fatal_error 'A USER/GROUP may only be specified when the SOURCE is $FW' unless $user eq '-';
 	    }
 
-	    $chainref = ensure_chain( 'mangle', $chainnames{$chain} );
+	    $chainref = ensure_chain( $table, $chainnames{$chain} );
 	}
 
 	$restriction |= $chainref->{restriction};
@@ -5509,22 +5512,6 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 	$interfaces    = $dest;
     }
     #
-    # Handle IPSEC options, if any
-    #
-    if ( $ipsec ne '-' ) {
-	fatal_error "Non-empty IPSEC column requires policy match support in your kernel and iptables"  unless have_capability( 'POLICY_MATCH' );
-
-	if ( $ipsec =~ /^yes$/i ) {
-	    $baserule .= do_ipsec_options 'out', 'ipsec', '';
-	} elsif ( $ipsec =~ /^no$/i ) {
-	    $baserule .= do_ipsec_options 'out', 'none', '';
-	} else {
-	    $baserule .= do_ipsec_options 'out', 'ipsec', $ipsec;
-	}
-    } elsif ( have_ipsec ) {
-	$baserule .= '-m policy --pol none --dir out ';
-    }
-    #
     # Handle Protocol, Ports and Condition
     #
     $baserule .= do_proto( $proto, $ports, '' );
@@ -5535,7 +5522,9 @@ sub process_snat1( $$$$$$$$$$$$ ) {
     $baserule .= do_user( $user )                    if $user ne '-';
     $baserule .= do_probability( $probability )      if $probability ne '-';
 
-    for my $fullinterface ( split_list( $interfaces, 'interface' ) ) {
+    my @interfaces = split_list( $interfaces, 'interface' );
+
+    for my $fullinterface ( @interfaces ) {
  
 	my $rule = '';
 	my $saveaddresses = $addresses;
@@ -5543,36 +5532,80 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 	my $savebaserule  = $baserule;
 	my $interface = $fullinterface;
 
-	$interface =~ s/:.*//;   #interface name may include 'alias'
-
-	unless ( $inaction ) {
-	    if ( $interface =~ /(.*)[(](\w*)[)]$/ ) {
-		$interface    = $1;
-		my $provider  = $2;
-
-		fatal_error "Missing Provider ($dest)" unless supplied $provider;
-
-		$dest =~ s/[(]\w*[)]//;
-		my $realm = provider_realm( $provider );
-
-		fatal_error "$provider is not a shared-interface provider" unless $realm;
-
-		$rule .= "-m realm --realm $realm ";
-	    }
-
-	    fatal_error "Unknown interface ($interface)" unless my $interfaceref = known_interface( $interface );
-
-	    if ( $interfaceref->{root} ) {
-		$interface = $interfaceref->{name} if $interface eq $interfaceref->{physical};
+	if ( $inaction ) {
+	    $interface =~ s/:.*// if $family == F_IPV4;   #interface name may include 'alias'
+	} else {
+	    if ( $interface eq firewall_zone ) {
+		if ( @interfaces == 1 ) {
+		    fatal_error q('+' not valid when the DEST is $FW) if $pre_nat;
+		    fatal_error q('MASQUERADE' not allowed when DEST is $FW) if $action eq 'MASQUERADE';
+		    require_capability 'NAT_INPUT_CHAIN', '$FW in the DEST column', 's';
+		    $interface = '';
+		} else {
+		    fatal_error q($FW may not appear in a list of interfaces);
+		}
 	    } else {
-		$rule .= match_dest_dev( $interface );
-		$interface = $interfaceref->{name};
+		$interface =~ s/:.*// if $family == F_IPV4;   #interface name may include 'alias'
+
+		if ( $interface =~ /(.*)[(](\w*)[)]$/ ) {
+		    $interface    = $1;
+		    my $provider  = $2;
+
+		    fatal_error "Missing Provider ($dest)" unless supplied $provider;
+
+		    $dest =~ s/[(]\w*[)]//;
+		    my $realm = provider_realm( $provider );
+
+		    fatal_error "$provider is not a shared-interface provider" unless $realm;
+
+		    $rule .= "-m realm --realm $realm ";
+		}
+
+		fatal_error "Unknown interface ($interface)" unless my $interfaceref = known_interface( $interface );
+
+		if ( $interfaceref->{root} ) {
+		    $interface = $interfaceref->{name} if $interface eq $interfaceref->{physical};
+		} else {
+		    $rule .= match_dest_dev( $interface );
+		    $interface = $interfaceref->{name};
+		}
 	    }
 
-	    $chainref = ensure_chain('nat', $pre_nat ? snat_chain $interface : masq_chain $interface);
+	    $chainref = $interface ? ensure_chain('nat',  $pre_nat ? snat_chain $interface : masq_chain $interface) : $nat_table->{INPUT};
+	}
+
+	if ( $chainref->{complete} ) {
+	    if ( $interface ) {
+		warning_message( "Interface $interface entry generated no $toolname rule" );
+	    } else {
+		warning_message( "Entry generated no $toolname rule" );
+	    }
+	    next;
 	}
 
 	$baserule .= do_condition( $condition , $chainref->{name} );
+	#
+	# Handle IPSEC options, if any
+	#
+	if ( $ipsec ne '-' ) {
+	    fatal_error "Non-empty IPSEC column requires policy match support in your kernel and iptables"  unless have_capability( 'POLICY_MATCH' );
+
+	    my $dir = $interface ? 'out' : 'in';
+
+	    if ( $ipsec =~ /^yes$/i ) {
+		$baserule .= do_ipsec_options $dir, 'ipsec', '';
+	    } elsif ( $ipsec =~ /^no$/i ) {
+		$baserule .= do_ipsec_options $dir, 'none', '';
+	    } else {
+		$baserule .= do_ipsec_options $dir, 'ipsec', $ipsec;
+	    }
+	} elsif ( have_ipsec ) {
+	    if ( $interface ) {
+		$baserule .= '-m policy --pol none --dir out ';
+	    } else {
+		$baserule .= '-m policy --pol none --dir in ';
+	    }
+	}
 
 	my $detectaddress = 0;
 	my $exceptionrule = '';
@@ -5580,6 +5613,7 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 
 	if ( $action eq 'SNAT' ) {
 	    if ( $addresses eq 'detect' ) {
+		fatal_error q('detect' not allowed when the destination is $FW) unless $interface;
 		my $variable = get_interface_address $interface;
 		$target .= " --to-source $variable";
 
@@ -5706,6 +5740,7 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 		$target .= $addrlist;
 	    }
 	} elsif ( $action eq 'MASQUERADE' ) {
+	    fatal_error q('MASQUERADE' not allowed when the destination is $FW') unless $interface;
 	    if ( supplied $addresses ) {
 		validate_portpair1($proto, $addresses );
 		$target .= " --to-ports $addresses";
@@ -5723,7 +5758,7 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 				 $params,
 				 $loglevel,
 				 $source,
-				 supplied $destnets && $destnets ne '-' ? $inaction ? $destnets : join( ':', $interface, $destnets ) : $inaction ? '-' : $interface,
+				 supplied( $destnets ) && $destnets ne '-' ? $inaction || $interface ? join( ':', $interface, $destnets ) : $destnets : $inaction ? '-' : $interface,
 				 $proto,
 				 $ports,
 				 $ipsec,
@@ -5788,7 +5823,7 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 	    $destnets = ALLIP unless supplied $destnets && $destnets ne '-';
 
 	    expand_rule( $chainref ,
-			 POSTROUTE_RESTRICT ,
+			 $interface ? POSTROUTE_RESTRICT : INPUT_RESTRICT ,
 			 $prerule ,
 			 $baserule . $inlinematches . $rule ,
 			 $source ,
@@ -5803,7 +5838,7 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 
 	    conditional_rule_end( $chainref ) if $detectaddress || $conditional;
 
-	    if ( $add_snat_aliases && $addresses ) {
+	    if ( $interface && $add_snat_aliases && $addresses ) {
 		my ( $interface, $alias , $remainder ) = split( /:/, $fullinterface, 3 );
 		fatal_error "Invalid alias ($alias:$remainder)" if defined $remainder;
 		for my $address ( split_list $addresses, 'address' ) {
@@ -5852,23 +5887,15 @@ sub process_snat( )
 }
 
 #
-# Process the masq or snat file
+# Process the snat file. Convert the masq file if found and non-empty
 #
-sub setup_snat( $ ) # Convert masq->snat if true
+sub setup_snat()
 {
     my $fn;
-    my $have_masq;
 
-    if ( $_[0] ) {
-	convert_masq();
-    } elsif ( $fn = open_file( 'masq', 1, 1 ) ) {
-	first_entry( sub { progress_message2 "$doing $fn..."; require_capability 'NAT_ENABLED' , "a non-empty masq file" , 's'; } );
-	process_one_masq(0), $have_masq = 1 while read_a_line( NORMAL_READ );
-    }
-
-    unless ( $have_masq ) {
+    unless ( convert_masq ) {
 	#
-	# Masq file empty or didn't exist
+	# Masq file was empty or didn't exist
 	#
 	if ( $fn = open_file( 'snat', 1, 1 ) ) {
 	    first_entry( sub { progress_message2 "$doing $fn..."; require_capability 'NAT_ENABLED' , "a non-empty snat file" , 's'; } );

Shorewall/Perl/Shorewall/Tc.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Tc.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Tc.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #     Traffic Control is from tc4shorewall Version 0.5
 #     (c) 2005 Arne Bernin <arne@ucbering.de>

Shorewall/Perl/Shorewall/Tunnels.pm

@@ -1,5 +1,5 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Tunnels.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Tunnels.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
@@ -85,8 +85,8 @@ sub setup_tunnels() {
 	    for my $zone ( split_list $gatewayzones, 'zone' ) {
 		my $type = zone_type( $zone );
 		fatal_error "Invalid zone ($zone) for GATEWAY ZONE" if $type == FIREWALL || $type == BPORT;
-		$inchainref  = ensure_rules_chain( rules_chain( ${zone}, ${fw} ) );
-		$outchainref = ensure_rules_chain( rules_chain( ${fw}, ${zone} ) );
+		$inchainref  = ensure_rules_chain( ${zone}, ${fw} );
+		$outchainref = ensure_rules_chain( ${fw}, ${zone} );
 
 		unless ( have_ipsec ) {
 		    add_tunnel_rule $inchainref,  p => 50, @$source;
@@ -250,8 +250,8 @@ sub setup_tunnels() {
 
 	fatal_error "Invalid tunnel ZONE ($zone)" if $zonetype & ( FIREWALL | BPORT );
 
-	my $inchainref  = ensure_rules_chain( rules_chain( ${zone}, ${fw} ) );
-	my $outchainref = ensure_rules_chain( rules_chain( ${fw}, ${zone} ) );
+	my $inchainref  = ensure_rules_chain( ${zone}, ${fw}   );
+	my $outchainref = ensure_rules_chain( ${fw},   ${zone} );
 
 	$gateways = ALLIP if $gateways eq '-';
 

Shorewall/Perl/Shorewall/Zones.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 4.4 -- /usr/share/shorewall/Shorewall/Zones.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Zones.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007,2008,2009,2010,2011 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007,2008,2009,2010,2011-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -2021,6 +2021,7 @@ sub verify_required_interfaces( $ ) {
 
 	emit( "esac\n" );
 
+	$returnvalue = 1;
     }
 
     $interfaces = find_interfaces_by_option( 'required' );
@@ -2030,7 +2031,7 @@ sub verify_required_interfaces( $ ) {
 	if ( $generate_case ) {
 	    emit( 'case "$COMMAND" in' );
 	    push_indent;
-	    emit( 'start|reload|restore|refresh)' );
+	    emit( 'start|reload|restore)' );
 	    push_indent;
 	}
 
@@ -2066,7 +2067,7 @@ sub verify_required_interfaces( $ ) {
 	    emit( ';;' );
 	    pop_indent;
 	    pop_indent;
-	    emit( 'esac' );
+	    emit( "esac\n" );
 	}
 
 	$returnvalue = 1;

Shorewall/Perl/compiler.pl

@@ -32,7 +32,6 @@
 #         --directory=<directory>     # Directory where configuration resides (default is /etc/shorewall)
 #         --timestamp                 # Timestamp all progress messages
 #         --debug                     # Print stack trace on warnings and fatal error.
-#         --refresh=<chainlist>       # Make the 'refresh' command refresh a comma-separated list of chains rather than 'blacklst'.
 #         --log=<filename>            # Log file
 #         --log_verbosity=<number>    # Log Verbosity range -1 to 2
 #         --family=<number>           # IP family; 4 = IPv4 (default), 6 = IPv6
@@ -40,7 +39,6 @@
 #         --shorewallrc=<path>        # Path to global shorewallrc file.
 #         --shorewallrc1=<path>       # Path to export shorewallrc file.
 #         --config_path=<path-list>   # Search path for config files
-#         --inline                    # Update alternative column specifications
 #         --update                    # Update configuration to current release
 #
 #    If the <filename> is omitted, then a 'check' operation is performed.
@@ -64,7 +62,6 @@ usage: compiler.pl [ <option> ... ] [ <filename> ]
     [ --timestamp ]
     [ --debug ]
     [ --confess ]
-    [ --refresh=<chainlist> ]
     [ --log=<filename> ]
     [ --log-verbose={-1|0-2} ]
     [ --test ]
@@ -75,7 +72,6 @@ usage: compiler.pl [ <option> ... ] [ <filename> ]
     [ --shorewallrc=<pathname> ]
     [ --shorewallrc1=<pathname> ]
     [ --config_path=<path-list> ]
-    [ --inline ]
 _EOF_
 
 exit shift @_;
@@ -90,7 +86,6 @@ my $verbose       = 0;
 my $timestamp     = 0;
 my $debug         = 0;
 my $confess       = 0;
-my $chains        = ':none:';
 my $log           = '';
 my $log_verbose   = 0;
 my $help          = 0;
@@ -102,7 +97,6 @@ my $update        = 0;
 my $config_path   = '';
 my $shorewallrc   = '';
 my $shorewallrc1  = '';
-my $inline        = 0;
 
 Getopt::Long::Configure ('bundling');
 
@@ -117,8 +111,6 @@ my $result = GetOptions('h'               => \$help,
 			'timestamp'       => \$timestamp,
 			't'               => \$timestamp,
 		        'debug'           => \$debug,
-			'r=s'             => \$chains,
-			'refresh=s'       => \$chains,
 			'log=s'           => \$log,
 			'l=s'             => \$log,
 			'log_verbosity=i' => \$log_verbose,
@@ -132,7 +124,6 @@ my $result = GetOptions('h'               => \$help,
 			'annotate'        => \$annotate,
 			'u'               => \$update,
 			'update'          => \$update,
-			'inline'          => \$inline,
 			'config_path=s'   => \$config_path,
 			'shorewallrc=s'   => \$shorewallrc,
 			'shorewallrc1=s'  => \$shorewallrc1,
@@ -147,7 +138,6 @@ compiler( script          => $ARGV[0] || '',
 	  timestamp       => $timestamp,
 	  debug           => $debug,
 	  export          => $export,
-	  chains          => $chains,
 	  log             => $log,
 	  log_verbosity   => $log_verbose,
 	  test            => $test,
@@ -159,5 +149,4 @@ compiler( script          => $ARGV[0] || '',
 	  config_path     => $config_path,
 	  shorewallrc     => $shorewallrc,
 	  shorewallrc1    => $shorewallrc1,
-	  inline          => $inline,
 	);

Shorewall/Perl/getparams

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall Packet Filtering Firewall Param File Helper - V4.4
+#     The Shoreline Firewall Packet Filtering Firewall Param File Helper - V5.2
 #
 #     (c) 2010,2011,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall/Perl/lib.runtime

@@ -1,4 +1,4 @@
-#   (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
+#   (c) 1999-2018 - Tom Eastep (teastep@shorewall.net)
 #
 #	This program is part of Shorewall.
 #
@@ -601,26 +601,29 @@ interface_enabled() {
 }
 
 distribute_load() {
+    local provider
     local interface
-    local currentload # Total load of enabled interfaces
-    local load        # Specified load of an enabled interface
-    local mark        # Mark of an enabled interface
-    local totalload   # Total load of all interfaces - usually 1.000000
-    local nload       # Normalized load of an enabled interface
-    local var         # Interface name to embed in a variable name
+    local currentload # Total load of enabled providers
+    local load        # Specified load of an enabled provider
+    local mark        # Mark of an enabled provider
+    local totalload   # Total load of all providers - usually 1.000000
+    local nload       # Normalized load of an enabled provider
 
     totalload=$1
     shift
 
     currentload=0
 
-    for interface in $@; do
+    for provider in $@; do
+
+	interface=$(cat ${VARDIR}/${provider}_interface)
+	eval ${provider}_interface=$interface
+
 	if interface_enabled $interface; then
-	    var=$(echo $interface | sed 's/[.-]/_/g')
-	    load=$(cat ${VARDIR}/${interface}_load)
-	    eval ${var}_load=$load
-	    mark=$(cat ${VARDIR}/${interface}_mark)
-	    eval ${var}_mark=$mark
+	    load=$(cat ${VARDIR}/${provider}_load)
+	    eval ${provider}_load=$load
+	    mark=$(cat ${VARDIR}/${provider}_mark)
+	    eval ${provider}_mark=$mark
 	    currentload=$( bc <<EOF
 scale=8
 $currentload + $load
@@ -630,12 +633,13 @@ EOF
     done
 
     if [ $currentload ]; then
-	for interface in $@; do
-	    qt $g_tool -t mangle -F ~$interface
+	for provider in $@; do
+	    eval interface=\$${provider}_interface
 
-	    var=$(echo $interface | sed 's/[.-]/_/g')
-	    eval load=\$${var}_load
-	    eval mark=\$${var}_mark
+	    qt $g_tool -t mangle -F ~$provider
+
+	    eval load=\$${provider}_load
+	    eval mark=\$${provider}_mark
 
 	    if [ -n "$load" ]; then
 		nload=$(bc <<EOF
@@ -651,10 +655,10 @@ EOF
 
 		case $nload in
 		    .*|0.*)
-			run_iptables -t mangle -A ~$interface -m statistic --mode random --probability $nload -j MARK --set-mark $mark
+			run_iptables -t mangle -A ~$provider -m statistic --mode random --probability $nload -j MARK --set-mark $mark
 			;;
 		    *)
-			run_iptables -t mangle -A ~$interface -j MARK --set-mark $mark
+			run_iptables -t mangle -A ~$provider -j MARK --set-mark $mark
 			;;
 		esac
 	    fi
@@ -675,7 +679,7 @@ interface_is_usable() # $1 = interface
     status=0
 
     if ! loopback_interface $1; then
-	if interface_is_up $1 && [ "$(find_first_interface_address_if_any $1)" != 0.0.0.0 ]; then
+	if interface_is_up $1 && [ "$(find_first_interface_address_if_any $1)" != 0.0.0.0 ] && [ -z "$($IP -$g_family link list dev $1 2> /dev/null | fgrep 'state DOWN')" ]; then
 	    if [ "$COMMAND" != enable ]; then
 		[ ! -f ${VARDIR}/${1}_disabled ] && run_isusable_exit $1
 		status=$?
@@ -959,7 +963,7 @@ add_gateway() # $1 = Delta $2 = Table Number
     local delta
     local dev
 
-    route=`$IP -4 -o route ls table $2 | grep ^default | sed 's/default //; s/[\]//g'`
+    route=`$IP -4 -o route ls table $2 | grep ^default | sed 's/default //; s/linkdown//g; s/[\]//g'`
 
     if [ -z "$route" ]; then
 	run_ip route add default scope global table $2 $1
@@ -993,7 +997,7 @@ delete_gateway() # $! = Description of the Gateway $2 = table number $3 = device
     local gateway
     local dev
 
-    route=`$IP -4 -o route ls table $2 | grep ^default | sed 's/[\]//g'`
+    route=`$IP -4 -o route ls table $2 | grep ^default | sed 's/linkdown//g; s/[\]//g'`
     gateway=$1
 
     if [ -n "$route" ]; then
@@ -1065,8 +1069,6 @@ clear_firewall() {
     run_iptables -F
     qt $IPTABLES -t raw -F
 
-    echo 1 > /proc/sys/net/ipv4/ip_forward
-
     if [ -n "$DISABLE_IPV6" ]; then
 	if [ -x $IP6TABLES ]; then
     	    $IP6TABLES -P INPUT   ACCEPT 2> /dev/null
@@ -1103,7 +1105,7 @@ interface_is_usable() # $1 = interface
     status=0
 
     if [ "$1" != lo ]; then
-	if interface_is_up $1 && [ "$(find_first_interface_address_if_any $1)" != :: ]; then
+	if interface_is_up $1 && [ "$(find_first_interface_address_if_any $1)" != :: ] && [ -z "$($IP -$g_family link list dev $1 2> /dev/null | fgrep 'state DOWN')" ]; then
 	    if [ "$COMMAND" != enable ]; then
 		[ ! -f ${VARDIR}/${1}_disabled ] && run_isusable_exit $1
 		status=$?
@@ -1375,8 +1377,6 @@ clear_firewall() {
     run_iptables -F
     qt $IP6TABLES -t raw -F
 
-    echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
-
     run_clear_exit
 
     set_state "Cleared"

Shorewall/Perl/prog.footer

@@ -1,5 +1,23 @@
 ###############################################################################
 # Code imported from /usr/share/shorewall/prog.footer
+#
+#   (c) 1999-2018 - Tom Eastep (teastep@shorewall.net)
+#
+#	This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#	Free Software Foundation, either version 2 of the license or, at your
+#	option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
 ###############################################################################
 #
 # Give Usage Information
@@ -355,6 +373,7 @@ case "$COMMAND" in
     clear)
 	[ $# -ne 1 ] && usage 2
 	progress_message3 "Clearing $g_product...."
+	detect_configuration
 	clear_firewall
 	status=0
 	if [ -n "$SUBSYSLOCK" ]; then

Shorewall/Samples/Universal/shorewall.conf

@@ -45,6 +45,8 @@ LOG_MARTIANS=Yes
 
 LOG_VERBOSITY=2
 
+LOG_ZONE=Both
+
 LOGALLNEW=
 
 LOGFILE=/var/log/messages
@@ -183,8 +185,6 @@ IGNOREUNKNOWNVARIABLES=No
 
 IMPLICIT_CONTINUE=No
 
-INLINE_MATCHES=Yes
-
 IPSET_WARNINGS=Yes
 
 IP_FORWARDING=On
@@ -199,8 +199,6 @@ MACLIST_TTL=
 
 MANGLE_ENABLED=Yes
 
-MAPOLDACTIONS=No
-
 MINIUPNPD=No
 
 MARK_IN_FORWARD_CHAIN=No
@@ -219,6 +217,8 @@ PERL_HASH_SEED=0
 
 REJECT_ACTION=
 
+RENAME_COMBINED=Yes
+
 REQUIRE_INTERFACE=Yes
 
 RESTART=restart

Shorewall/Samples/one-interface/shorewall.conf

@@ -56,6 +56,8 @@ LOG_MARTIANS=Yes
 
 LOG_VERBOSITY=2
 
+LOG_ZONE=Both
+
 LOGALLNEW=
 
 LOGFILE=/var/log/messages
@@ -194,8 +196,6 @@ IGNOREUNKNOWNVARIABLES=No
 
 IMPLICIT_CONTINUE=No
 
-INLINE_MATCHES=Yes
-
 IPSET_WARNINGS=Yes
 
 IP_FORWARDING=Off
@@ -210,8 +210,6 @@ MACLIST_TTL=
 
 MANGLE_ENABLED=Yes
 
-MAPOLDACTIONS=No
-
 MINIUPNPD=No
 
 MARK_IN_FORWARD_CHAIN=No
@@ -230,6 +228,8 @@ PERL_HASH_SEED=0
 
 REJECT_ACTION=
 
+RENAME_COMBINED=Yes
+
 REQUIRE_INTERFACE=No
 
 RESTART=restart

Shorewall/Samples/three-interfaces/shorewall.conf

@@ -53,6 +53,8 @@ LOG_MARTIANS=Yes
 
 LOG_VERBOSITY=2
 
+LOG_ZONE=Both
+
 LOGALLNEW=
 
 LOGFILE=/var/log/messages
@@ -191,8 +193,6 @@ IGNOREUNKNOWNVARIABLES=No
 
 IMPLICIT_CONTINUE=No
 
-INLINE_MATCHES=Yes
-
 IPSET_WARNINGS=Yes
 
 IP_FORWARDING=On
@@ -207,8 +207,6 @@ MACLIST_TTL=
 
 MANGLE_ENABLED=Yes
 
-MAPOLDACTIONS=No
-
 MINIUPNPD=No
 
 MARK_IN_FORWARD_CHAIN=No
@@ -227,6 +225,8 @@ PERL_HASH_SEED=0
 
 REJECT_ACTION=
 
+RENAME_COMBINED=Yes
+
 REQUIRE_INTERFACE=No
 
 RESTART=restart

Shorewall/Samples/two-interfaces/shorewall.conf

@@ -56,6 +56,8 @@ LOG_MARTIANS=Yes
 
 LOG_VERBOSITY=2
 
+LOG_ZONE=Both
+
 LOGALLNEW=
 
 LOGFILE=/var/log/messages
@@ -194,8 +196,6 @@ IGNOREUNKNOWNVARIABLES=No
 
 IMPLICIT_CONTINUE=No
 
-INLINE_MATCHES=Yes
-
 IPSET_WARNINGS=Yes
 
 IP_FORWARDING=On
@@ -210,8 +210,6 @@ MACLIST_TTL=
 
 MANGLE_ENABLED=Yes
 
-MAPOLDACTIONS=No
-
 MINIUPNPD=No
 
 MARK_IN_FORWARD_CHAIN=No
@@ -230,6 +228,8 @@ PERL_HASH_SEED=0
 
 REJECT_ACTION=
 
+RENAME_COMBINED=Yes
+
 REQUIRE_INTERFACE=No
 
 RESTART=restart

Shorewall/actions.std

@@ -8,11 +8,8 @@
 #
 ###############################################################################
 #ACTION
-A_AllowICMPs inline		# Audited version of AllowICMPs
-A_Drop				# Audited Default Action for DROP policy
 A_REJECT     noinline,logjump	# Audits then rejects a connection request
 A_REJECT!    inline		# Audits then rejects a connection request
-A_Reject			# Audited Default action for REJECT policy
 AllowICMPs   inline		# Allow Required ICMP packets
 allowBcast   inline		# Silently Allow Broadcast
 allowinUPnP  inline		# Allow UPnP inbound (to firewall) traffic
@@ -27,7 +24,6 @@ Broadcast    inline,audit	# Handles Broadcast/Anycast
 Broadcast    noinline,audit	# Handles Broadcast/Anycast
 ?endif
 DNSAmp	     proto=17		# Matches one-question recursive DNS queries
-Drop				# Default Action for DROP policy (deprecated)
 dropBcast    inline		# Silently Drop Broadcast
 dropBcasts   inline		# Silently Drop Broadcast
 dropInvalid  inline		# Drops packets in the INVALID conntrack state
@@ -54,7 +50,6 @@ New	     inline,state=NEW	# Handles packets in the NEW conntrack state
 NotSyn	     inline,audit,\	# Handles TCP packets which do not have SYN=1 and ACK=0
 	     proto=6
 rejNotSyn    noinline,proto=6	# Silently Reject Non-syn TCP packets
-Reject				# Default Action for REJECT policy (deprecated)
 Related	     inline,\		# Handles packets in the RELATED conntrack state
 	     state=RELATED	#
 ResetEvent   inline		# Reset an Event

Shorewall/configfiles/masq

@@ -1,10 +0,0 @@
-#
-# Shorewall -- /etc/shorewall/masq
-#
-# For information about entries in this file, type "man shorewall-masq"
-#
-# The manpage is also online at
-# http://www.shorewall.net/manpages/shorewall-masq.html
-#
-###################################################################################################################################
-#INTERFACE		SOURCE		ADDRESS		PROTO	PORT	IPSEC	MARK	USER	SWITCH	ORIGDEST	PROBABILITY