Correct 'show macros'

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/install.sh

@@ -22,20 +22,64 @@
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx #The Build script inserts the actual version
+
 PRODUCT=shorewall-core
 Product="Shorewall Core"
-
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
+    echo "usage: $ME [ <configuration-file> ] "
+    echo "       $ME -v"
+    echo "       $ME -h"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    echo $dir/$1
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+cant_autostart()
+{
+    echo
+    echo  "WARNING: Unable to configure shorewall to start automatically at boot" >&2
+}
+
+delete_file() # $1 = file to delete
+{
+    rm -f $1
+}
+
 install_file() # $1 = source $2 = target $3 = mode
 {
     if cp -f $1 $2; then
@@ -54,16 +98,16 @@ install_file() # $1 = source $2 = target $3 = mode
     exit 1
 }
 
+require()
+{
+    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-#
-# Source common functions
-#
-. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
 #
 # Parse the run line
 #
@@ -82,7 +126,7 @@ while [ $finished -eq 0 ]; do
 			usage 0
 			;;
 		    v)
-			echo "$Product Firewall Installer Version $VERSION"
+			echo "Shorewall Firewall Installer Version $VERSION"
 			exit 0
 			;;
 		    *)
@@ -104,14 +148,14 @@ done
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
+	. ./shorewallrc
 	file=./shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f ~/.shorewallrc ]; then
+	. ~/.shorewallrc || exit 1
 	file=~/.shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
+	. /usr/share/shorewall/shorewallrc
 	file=/usr/share/shorewall/shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -125,7 +169,7 @@ elif [ $# -eq 1 ]; then
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
@@ -241,12 +285,13 @@ case "$HOST" in
     debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
 	;;
     *)
-	fatal_error "Unknown HOST \"$HOST\""
+	echo "ERROR: Unknown HOST \"$HOST\"" >&2
+	exit 1;
 	;;
 esac
 
 if [ -z "$file" ]; then
-    if [ $HOST = linux ]; then
+    if $HOST = linux; then
 	file=shorewallrc.default
     else
 	file=shorewallrc.${HOST}
@@ -259,8 +304,7 @@ if [ -z "$file" ]; then
     echo "" >&2
     echo "Example:" >&2
     echo "" >&2
-    echo "   ./install.sh $file" >&2
-    exit 1
+    echo "   ./install.sh $file" &>2
 fi
 
 if [ -n "$DESTDIR" ]; then
@@ -271,31 +315,45 @@ if [ -n "$DESTDIR" ]; then
     fi
 fi
 
-echo "Installing $Product Version $VERSION"
+echo "Installing Shorewall Core Version $VERSION"
 
 #
 # Create directories
 #
-make_parent_directory ${DESTDIR}${LIBEXECDIR}/shorewall 0755
+mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall
+chmod 755 ${DESTDIR}${LIBEXECDIR}/shorewall
 
-make_parent_directory ${DESTDIR}${SHAREDIR}/shorewall 0755
+mkdir -p ${DESTDIR}${SHAREDIR}/shorewall
+chmod 755 ${DESTDIR}${SHAREDIR}/shorewall
 
-make_parent_directory ${DESTDIR}${CONFDIR} 0755
+mkdir -p ${DESTDIR}${CONFDIR}
+chmod 755 ${DESTDIR}${CONFDIR}
 
-[ -n "${SYSCONFDIR}" ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+if [ -n "${SYSCONFDIR}" ]; then
+    mkdir -p ${DESTDIR}${SYSCONFDIR}
+    chmod 755 ${DESTDIR}${SYSCONFDIR}
+fi
 
 if [ -z "${SERVICEDIR}" ]; then
     SERVICEDIR="$SYSTEMD"
 fi
 
-[ -n "${SERVICEDIR}" ] && make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+if [ -n "${SERVICEDIR}" ]; then
+    mkdir -p ${DESTDIR}${SERVICEDIR}
+    chmod 755 ${DESTDIR}${SERVICEDIR}
+fi
 
-make_parent_directory ${DESTDIR}${SBINDIR} 0755
+mkdir -p ${DESTDIR}${SBINDIR}
+chmod 755 ${DESTDIR}${SBINDIR}
 
-[ -n "${MANDIR}" ] && make_parent_directory ${DESTDIR}${MANDIR} 0755
+if [ -n "${MANDIR}" ]; then
+    mkdir -p ${DESTDIR}${MANDIR}
+    chmod 755 ${DESTDIR}${MANDIR}
+fi
 
 if [ -n "${INITFILE}" ]; then
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    mkdir -p ${DESTDIR}${INITDIR}
+    chmod 755 ${DESTDIR}${INITDIR}
 
     if [ -n "$AUXINITSOURCE" -a -f "$AUXINITSOURCE" ]; then
 	install_file $AUXINITSOURCE ${DESTDIR}${INITDIR}/$AUXINITFILE 0544
@@ -311,7 +369,7 @@ fi
 #
 install_file shorewall ${DESTDIR}${SBINDIR}/shorewall 0755
 [ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall
-echo "Shorewall CLI program installed in ${DESTDIR}${SBINDIR}/shorewall"
+echo "Shorewall CLI program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
 #
 # Install wait4ifup
 #
@@ -324,14 +382,8 @@ echo "wait4ifup installed in ${DESTDIR}${LIBEXECDIR}/shorewall/wait4ifup"
 # Install the libraries
 #
 for f in lib.* ; do
-    case $f in
-        *installer)
-            ;;
-        *)
-            install_file $f ${DESTDIR}${SHAREDIR}/shorewall/$f 0644
-            echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
-            ;;
-    esac
+    install_file $f ${DESTDIR}${SHAREDIR}/shorewall/$f 0644
+    echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
 done
 
 if [ $SHAREDIR != /usr/share ]; then
@@ -346,11 +398,11 @@ fi
 if [ -n "$MANDIR" ]; then
     cd manpages
 
-    [ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
+    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man8/
 
     for f in *.8; do
 	gzip -9c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
@@ -367,7 +419,7 @@ ln -sf lib.base ${DESTDIR}${SHAREDIR}/shorewall/functions
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}${SHAREDIR}/shorewall/coreversion
-chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall/coreversion
+chmod 644 ${DESTDIR}${SHAREDIR}/shorewall/coreversion
 
 if [ -z "${DESTDIR}" ]; then
     if [ $update -ne 0 ]; then
@@ -392,20 +444,14 @@ fi
 
 if [ ${SHAREDIR} != /usr/share ]; then
     for f in lib.*; do
-        case $f in
-            *installer)
-                ;;
-            *)
-                if [ $BUILD != apple ]; then
-                    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
-                else
-                    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
-                fi
-                ;;
-        esac
+	if [ $BUILD != apple ]; then
+	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+	else
+	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+	fi
     done
 fi
 #
-# Report Success
+#  Report Success
 #
-echo "$Product Version $VERSION Installed"
+echo "Shorewall Core Version $VERSION Installed"

Shorewall-core/lib.cli

@@ -78,6 +78,29 @@ showchain() # $1 = name of chain
     fi
 }
 
+#
+# The 'awk' hack that compensates for bugs in iptables-save (or rather in the extension modules).
+#
+
+iptablesbug()
+{
+    if [ $g_family -eq 4 ]; then
+	if qt mywhich awk ; then
+	    awk 'BEGIN           { sline=""; };\
+             /^-[jg]/            { print sline $0; next };\
+             /-m policy.*-[jg] / { print $0; next };\
+             /-m policy/         { sline=$0; next };\
+             /--mask ff/         { sub( /--mask ff/, "--mask 0xff" ) };\
+                                 { print ; sline="" }'
+        else
+	    echo "   WARNING: You don't have 'awk' on this system so the output of the save command may be unusable" >&2
+	    cat
+	fi
+    else
+	cat
+    fi
+}
+
 #
 # Validate the value of RESTOREFILE
 #
@@ -1127,11 +1150,6 @@ show_macros() {
     done
 }
 
-show_an_action() {
-    echo "Shorewall $SHOREWALL_VERSION Action $1 at $g_hostname - $(date)"
-    cat ${directory}/action.$1
-}
-
 show_a_macro() {
     echo "Shorewall $SHOREWALL_VERSION Macro $1 at $g_hostname - $(date)"
     cat ${directory}/macro.$1
@@ -1440,27 +1458,12 @@ show_command() {
 		    ;;
 	    	*)
 		    case $1 in
-			action)
-			    [ $# -lt 2 ] && fatal_error 'Missing <action>'
-			    [ $# -gt 2 ] && too_many_arguments $2
-
-			    for directory in $(split $CONFIG_PATH); do
-				if [ -f ${directory}/action.$2 ]; then
-				    eval show_an_action $2 $g_pager
-				    return
-				fi
-			    done
-
-			    echo "   WARNING: Action $2 not found" >&2
-			    return
-			    ;;
 			actions)
 			    [ $# -gt 1 ] && too_many_arguments $2
 			    eval show_actions_sorted $g_pager
 			    return
 			    ;;
 			macro)
-			    [ $# -lt 2 ] && fatal_error 'Missing <macro>'
 			    [ $# -ne 2 ] && too_many_arguments $2
 			    for directory in $(split $CONFIG_PATH); do
 				if [ -f ${directory}/macro.$2 ]; then
@@ -4264,17 +4267,12 @@ usage() # $1 = exit status
     echo "   reenable <interface>"
     ecko "   refresh [ -d ] [ -n ] [ -T ] [ -D <directory> ] [ <chain>... ]"
     echo "   reject <address> ..."
-
-    if [ -n "$g_lite" ]; then
-	echo "   reload [ -n ] [ -p ] [ -f ] [ -C ] [ <directory> ]"
-    else
-	echo "   reload [ -n ] [ -p ] [-d] [ -f ] [ -c ] [ -T ] [ -i ] [ -C ] [ <directory> ]"
-    fi
+    ecko "   reload [ -s ] [ -c ] [ -r <root user> ] [ -T ] [ -i ] [ <directory> ] <system>"
 
     if [ -z "$g_lite" ]; then
-	echo "   remote-reload [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
-	echo "   remote-restart [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
-	echo "   remote-start [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-reload [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-restart [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-start [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
     fi
 
     echo "   reset [ <chain> ... ]"
@@ -4293,7 +4291,6 @@ usage() # $1 = exit status
     echo "   savesets"
     echo "   [ show | list | ls ] [ -b ] [ -x ] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]"
     ecko "   [ show | list | ls ] actions"
-    ecko "   [ show | list | ls ] action <action>"
     echo "   [ show | list | ls ] arptables"
     echo "   [ show | list | ls ] [ -f ] capabilities"
     echo "   [ show | list | ls ] [ -x ] {bl|blacklists}"
@@ -4396,10 +4393,7 @@ shorewall_cli() {
     finished=0
 
     while [ $finished -eq 0 ]; do
-	if [ $# -eq 0 ]; then
-	    setup_product_environment 1
-	    usage 1
-	fi
+	[ $# -eq 0 ] && usage 1
 	option=$1
 	case $option in
 	    -)
@@ -4529,6 +4523,10 @@ shorewall_cli() {
 	esac
     done
 
+    if [ $# -eq 0 ]; then
+	usage 1
+    fi
+
     setup_product_environment 1
 
    [ -n "$g_lite" ] || . ${SHAREDIR}/shorewall/lib.cli-std

Shorewall-core/lib.installer

@@ -1,89 +0,0 @@
-#
-#
-# Shorewall 5.0 -- /usr/share/shorewall/lib.installer.
-#
-#     (c) 2017 - Tom Eastep (teastep@shorewall.net)
-#     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
-#
-#	Complete documentation is available at http://shorewall.net
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# The purpose of this library is to hold those functions used by the products installer.
-#
-#########################################################################################
-
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-delete_file() # $1 = file to delete
-{
-    rm -f $1
-}
-
-require()
-{
-    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
-}
-
-make_directory() # $1 = directory , $2 = mode
-{
-    mkdir $1
-    chmod $2 $1
-    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
-}
-
-make_parent_directory() # $1 = directory , $2 = mode
-{
-    mkdir -p $1
-    chmod $2 $1
-    [ -n "$OWNERSHIP" ] && chown $OWNER:$GROUP $1
-}
-
-cant_autostart()
-{
-    echo
-    echo  "WARNING: Unable to configure $Product to start automatically at boot" >&2
-}

Shorewall-core/lib.uninstaller

@@ -1,106 +0,0 @@
-#
-#
-# Shorewall 5.0 -- /usr/share/shorewall/lib.installer.
-#
-#     (c) 2017 - Tom Eastep (teastep@shorewall.net)
-#     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
-#
-#	Complete documentation is available at http://shorewall.net
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# The purpose of this library is to hold those functions used by the products uninstaller.
-#
-#########################################################################################
-
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-remove_file() # $1 = file to remove
-{
-    if [ -n "$1" ] ; then
-        if [ -f $1 -o -L $1 ] ; then
-            rm -f $1
-            echo "$1 Removed"
-        fi
-    fi
-}
-
-remove_directory() # $1 = directory to remove
-{
-    if [ -n "$1" ] ; then
-        if [ -d $1 ] ; then
-            rm -rf $1
-            echo "$1 Removed"
-        fi
-    fi
-}
-
-remove_file_with_wildcard() # $1 = file with wildcard to remove
-{
-    if [ -n "$1" ] ; then
-        for f in $1; do
-            if [ -d $f ] ; then
-                rm -rf $f
-                echo "$f Removed"
-            elif [ -f $f -o -L $f ] ; then
-                rm -f $f
-                echo "$f Removed"
-            fi
-        done
-    fi
-}
-
-restore_file() # $1 = file to restore
-{
-    if [ -f ${1}-shorewall.bkout ]; then
-	if (mv -f ${1}-shorewall.bkout $1); then
-	    echo
-	    echo "$1 restored"
-        else
-	    exit 1
-        fi
-    fi
-}

Shorewall-core/manpages/shorewall.xml

@@ -432,33 +432,6 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall[6][-lite]</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>options</arg>
-
-      <arg choice="plain"><option>reload</option></arg>
-
-      <arg><option>-n</option></arg>
-
-      <arg><option>-p</option><arg><option>-d</option></arg></arg>
-
-      <arg><option>-f</option></arg>
-
-      <arg><option>-c</option></arg>
-
-      <arg><option>-T</option></arg>
-
-      <arg><option>-i</option></arg>
-
-      <arg><option>-C</option></arg>
-
-      <arg><replaceable>directory</replaceable></arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall[6]</command>
 
@@ -712,31 +685,6 @@
       <arg choice="plain"><option>capabilities</option></arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall[6]</command>
-
-      <arg>options</arg>
-
-      <arg choice="req"><option>show | list | ls </option></arg>
-
-      <arg><option>-f</option></arg>
-
-      <arg choice="plain"><option>{actions|macros}</option></arg>
-    </cmdsynopsis>
-
-    <cmdsynopsis>
-      <command>shorewall[6]</command>
-
-      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
-
-      <arg>options</arg>
-
-      <arg choice="req"><option>show | list | ls </option></arg>
-
-      <arg choice="plain"><option>action</option><arg
-      choice="plain"><replaceable>action</replaceable></arg></arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall[6][-lite]</command>
 
@@ -747,7 +695,7 @@
       <arg choice="req"><option>show | list | ls </option></arg>
 
       <arg
-      choice="req"><option>classifiers|connections|config|events|filters|ip|ipa|ipsec|zones|policies|marks</option></arg>
+      choice="req"><option>actions|classifiers|connections|config|events|filters|ip|ipa|ipsec|macros|zones|policies|marks</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -1943,11 +1891,10 @@
 
       <varlistentry>
         <term><emphasis role="bold">remote-start</emphasis>
-        [-<option>n</option>] [-<option>s</option>] [-<option>c</option>]
-        [-<option>r</option> <replaceable>root-user-name</replaceable>]
-        [-<option>T</option>] [-<option>i</option>] [ [ -D ]
-        <replaceable>directory</replaceable> ] [
-        <replaceable>system</replaceable> ]</term>
+        [-<option>s</option>] [-<option>c</option>] [-<option>r</option>
+        <replaceable>root-user-name</replaceable>] [-<option>T</option>]
+        [-<option>i</option>] [ [ -D ] <replaceable>directory</replaceable> ]
+        [ <replaceable>system</replaceable> ]</term>
 
         <listitem>
           <para>This command was renamed from <command>load</command> in
@@ -1983,9 +1930,6 @@
           <replaceable>directory</replaceable>, then the <option>-D</option>
           option must be given.</para>
 
-          <para>The <option>-n</option> option causes Shorewall to avoid
-          updating the routing table(s).</para>
-
           <para>If <emphasis role="bold">-s</emphasis> is specified and the
           <emphasis role="bold">start</emphasis> command succeeds, then the
           remote Shorewall-lite configuration is saved by executing <emphasis
@@ -2471,23 +2415,12 @@
           arguments:</para>
 
           <variablelist>
-            <varlistentry>
-              <term><emphasis role="bold">action
-              <replaceable>action</replaceable></emphasis></term>
-
-              <listitem>
-                <para>Lists the named action file. Available on Shorewall and
-                Shorewall6 only.</para>
-              </listitem>
-            </varlistentry>
-
             <varlistentry>
               <term><emphasis role="bold">actions</emphasis></term>
 
               <listitem>
                 <para>Produces a report about the available actions (built-in,
-                standard and user-defined). Available on Shorewall and
-                Shorewall6 only.</para>
+                standard and user-defined).</para>
               </listitem>
             </varlistentry>
 

Shorewall-core/shorewallrc.debian.systemd

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.0 rc file
+# Debian Shorewall 4.5 rc file
 #
 BUILD=					#Default is to detect the build system
 HOST=debian
@@ -14,7 +14,7 @@ INITDIR=				#Directory where SysV init scripts are installed.
 INITFILE=				#Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
 ANNOTATED=				#If non-zero, annotated configuration files are installed
-SYSCONFFILE=default.debian.systemd		#Name of the distributed file to be installed in $SYSCONFDIR
+SYSCONFFILE=default.debian		#Name of the distributed file to be installed in $SYSCONFDIR
 SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
 SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)

Shorewall-core/shorewallrc.debian.sysvinit

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.0 rc file
+# Debian Shorewall 4.5 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=debian
@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                     #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SYSCONFFILE=default.debian.sysvinit              #Name of the distributed file to be installed in $SYSCONFDIR
+SYSCONFFILE=default.debian              #Name of the distributed file to be installed in $SYSCONFDIR
 SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default                 #Directory where SysV init parameter files are installed
 SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)

Shorewall-core/shorewallrc.default

@@ -1,8 +1,8 @@
 #
 # Default Shorewall 5.0 rc file
 #
-BUILD=                                  #Default is to detect the build system
 HOST=linux                              #Generic Linux
+BUILD=                                  #Default is to detect the build system
 PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
 SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.

Shorewall-core/shorewallrc.openwrt

@@ -1,8 +1,8 @@
 #
-# OpenWRT Shorewall 5.0 rc file
+# Created by Shorewall Core version 5.0.2-RC1 configure -  Fri, Nov 06, 2015 10:02:03 AM
+#
+# Input: host=openwrt
 #
-BUILD=                                 #Default is to detect the build system
-HOST=openwrt
 PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
 SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.

Shorewall-core/uninstall.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall Core Modules
+# Script to back uninstall Shoreline Firewall
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
@@ -26,75 +26,63 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx # The Build script inserts the actual version
-PRODUCT=shorewall-core
+VERSION=xxx #The Build script inserts the actual version
+PRODUCT="shorewall-core"
 Product="Shorewall Core"
-
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
+    echo "usage: $ME [ <shorewallrc file> ]"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+restore_file() # $1 = file to restore
+{
+    if [ -f ${1}-shorewall.bkout ]; then
+	if (mv -f ${1}-shorewall.bkout $1); then
+	    echo
+	    echo "$1 restored"
+        else
+	    exit 1
+        fi
+    fi
+}
+
+remove_file() # $1 = file to restore
+{
+    if [ -f $1 -o -L $1 ] ; then
+	rm -f $1
+	echo "$1 Removed"
+    fi
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-#
-# Source common functions
-#
-. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
-#
-# Parse the run line
-#
-finished=0
-
-while [ $finished -eq 0 ]; do
-    option=$1
-
-    case "$option" in
-	-*)
-	    option=${option#-}
-
-	    while [ -n "$option" ]; do
-		case $option in
-		    h)
-			usage 0
-			;;
-		    v)
-			echo "$Product Firewall Uninstaller Version $VERSION"
-			exit 0
-			;;
-		    *)
-			usage 1
-			;;
-		esac
-	    done
-
-	    shift
-	    ;;
-	*)
-	    finished=1
-	    ;;
-    esac
-done
-
 #
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
-        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+	. ~/.shorewallrc || exit 1
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -104,11 +92,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
@@ -116,26 +104,20 @@ fi
 if [ -f ${SHAREDIR}/shorewall/coreversion ]; then
     INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall/coreversion)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
+	echo "WARNING: Shorewall Core Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: $Product Version $VERSION is not installed"
+    echo "WARNING: Shorewall Core Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling $Product $VERSION"
+echo "Uninstalling Shorewall Core $VERSION"
 
-if [ -n "${MANDIR}" ]; then
-    remove_file_with_wildcard ${MANDIR}/man5/shorewall\*
-    remove_file_with_wildcard ${MANDIR}/man8/shorewall\*
-fi
+rm -rf ${SHAREDIR}/shorewall
+rm -f ~/.shorewallrc
+
+echo "Shorewall Core Uninstalled"
 
-remove_directory ${SHAREDIR}/shorewall
-remove_file ~/.shorewallrc
 
-#
-# Report Success
-#
-echo "$Product $VERSION Uninstalled"

Shorewall-init/default.debian.systemd

@@ -1,21 +0,0 @@
-# List the Shorewall products that Shorewall-init is to
-# initialize (space-separated list).
-#
-# Sample: PRODUCTS="shorewall shorewall6"
-#
-PRODUCTS=""
-
-#
-# Set this to 1 if you want Shorewall-init to react to
-# ifup/ifdown and NetworkManager events
-#
-IFUPDOWN=0
-#
-# Where Up/Down events get logged
-#
-LOGFILE=/var/log/shorewall-ifupdown.log
-
-# Startup options - set verbosity to 0 (minimal reporting)
-OPTIONS="-V0"
-
-# IOF

Shorewall-init/default.debian.sysvinit

@@ -1,27 +0,0 @@
-# List the Shorewall products that Shorewall-init is to
-# initialize (space-separated list).
-#
-# Sample: PRODUCTS="shorewall shorewall6"
-#
-PRODUCTS=""
-
-#
-# Set this to 1 if you want Shorewall-init to react to
-# ifup/ifdown and NetworkManager events
-#
-IFUPDOWN=0
-#
-# Set this to the name of the file that is to hold
-# ipset contents. Shorewall-init will load those ipsets
-# during 'start' and will save them there during 'stop'.
-#
-SAVE_IPSETS=""
-#
-# Where Up/Down events get logged
-#
-LOGFILE=/var/log/shorewall-ifupdown.log
-
-# Startup options - set verbosity to 0 (minimal reporting)
-OPTIONS="-V0"
-
-# IOF

Shorewall-init/install.sh

@@ -27,21 +27,58 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx #The Build script inserts the actual version.
 PRODUCT=shorewall-init
 Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
-    echo "  -n"
+    echo "usage: $ME [ <configuration-file> ]"
+    echo "       $ME -v"
+    echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
+fatal_error() 
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+cant_autostart()
+{
+    echo
+    echo  "WARNING: Unable to configure shorewall init to start automatically at boot" >&2
+}
+
 install_file() # $1 = source $2 = target $3 = mode
 {
     if cp -f $1 $2; then
@@ -60,16 +97,23 @@ install_file() # $1 = source $2 = target $3 = mode
     exit 1
 }
 
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 0755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+}
+
+require() 
+{
+    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-#
-# Source common functions
-#
-. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
 #
 # Parse the run line
 #
@@ -90,7 +134,7 @@ while [ $finished -eq 0 ] ; do
 			usage 0
 			;;
 		    v)
-			echo "$Product Firewall Installer Version $VERSION"
+			echo "Shorewall-init Firewall Installer Version $VERSION"
 			exit 0
 			;;
 		    n*)
@@ -115,17 +159,17 @@ done
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
+    #
+    # Load packager's settings if any
+    #
     if [ -f ./shorewallrc ]; then
+	. ./shorewallrc || exit 1
 	file=./shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f ~/.shorewallrc ]; then
+	. ~/.shorewallrc || exit 1
 	file=~/.shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
-    elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	file=/usr/share/shorewall/shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
-    else
-	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
+     else
+	fatal_error "No configuration file specified and ~/.shorewallrc not found"
     fi
 elif [ $# -eq 1 ]; then
     file=$1
@@ -133,11 +177,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
@@ -254,10 +298,12 @@ case "$HOST" in
 	echo "Installing Openwrt-specific configuration..."
 	;;
     linux)
-	fatal_error "Shorewall-init is not supported on this system"
+	echo "ERROR: Shorewall-init is not supported on this system" >&2
+	exit 1
 	;;
     *)
-	fatal_error "Unsupported HOST distribution: \"$HOST\""
+	echo "ERROR: Unsupported HOST distribution: \"$HOST\"" >&2
+	exit 1;
 	;;
 esac
 
@@ -269,27 +315,30 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
     
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    make_directory ${DESTDIR}${INITDIR} 0755
 fi
 
-echo "Installing $Product Version $VERSION"
+echo "Installing Shorewall Init Version $VERSION"
 
 #
 # Check for /usr/share/shorewall-init/version
 #
-if [ -f ${DESTDIR}${SHAREDIR}/$PRODUCT/version ]; then
+if [ -f ${DESTDIR}${SHAREDIR}/shorewall-init/version ]; then
     first_install=""
 else
     first_install="Yes"
 fi
 
-[ -n "$DESTDIR" ] && make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
+if [ -n "$DESTDIR" ]; then
+    mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 0755 ${DESTDIR}${CONFDIR}/logrotate.d
+fi
 
 #
 # Install the Firewall Script
 #
 if [ -n "$INITFILE" ]; then
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    mkdir -p ${DESTDIR}${INITDIR}
     install_file $INITSOURCE ${DESTDIR}${INITDIR}/$INITFILE 0544
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${INITDIR}/$INITFILE
     
@@ -308,21 +357,25 @@ if [ -z "${SERVICEDIR}" ]; then
 fi
 
 if [ -n "$SERVICEDIR" ]; then
-    make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
     install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
-    [ -n "$DESTDIR" -o $configure -eq 0 ] && make_parent_directory ${DESTDIR}${SBINDIR} 0755
-    install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0700
-    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
-    echo "CLI installed as ${DESTDIR}${SBINDIR}/$PRODUCT"
+    if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
+	mkdir -p ${DESTDIR}${SBINDIR}
+        chmod 0755 ${DESTDIR}${SBINDIR}
+    fi
+    install_file shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init 0700
+    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall-init
+    echo "CLI installed as ${DESTDIR}${SBINDIR}/shorewall-init"
 fi
 
 #
 # Create /usr/share/shorewall-init if needed
 #
-make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
+mkdir -p ${DESTDIR}${SHAREDIR}/shorewall-init
+chmod 0755 ${DESTDIR}${SHAREDIR}/shorewall-init
 
 #
 # Install logrotate file
@@ -335,53 +388,55 @@ fi
 #
 # Create the version file
 #
-echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/$PRODUCT/version
-chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
+echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/shorewall-init/version
+chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
 
 #
 # Remove and create the symbolic link to the init script
 #
 if [ -z "$DESTDIR" ]; then
-    rm -f ${SHAREDIR}/$PRODUCT/init
-    ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
+    rm -f ${SHAREDIR}/shorewall-init/init
+    ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/shorewall-init/init
 fi
 
 if [ $HOST = debian ]; then
     if [ -n "${DESTDIR}" ]; then
-	make_parent_directory ${DESTDIR}${ETC}/network/if-up.d 0755
-	make_parent_directory ${DESTDIR}${ETC}/network/if-down.d 0755
-	make_parent_directory ${DESTDIR}${ETC}/network/if-post-down.d 0755
+	mkdir -p ${DESTDIR}${ETC}/network/if-up.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-down.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-post-down.d/
     elif [ $configure -eq 0 ]; then
-	make_parent_directory ${DESTDIR}${CONFDIR}/network/if-up.d 0755
-	make_parent_directory ${DESTDIR}${CONFDIR}/network/if-down.d 0755
-	make_parent_directory ${DESTDIR}${CONFDIR}/network/if-post-down.d 0755
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-post-down.d/
     fi
 
-    if [ ! -f ${DESTDIR}${CONFDIR}/default/$PRODUCT ]; then
-	[ -n "${DESTDIR}" ] && make_parent_directory ${DESTDIR}${ETC}/default 0755
+    if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
+	if [ -n "${DESTDIR}" ]; then
+	    mkdir -p ${DESTDIR}${ETC}/default
+	fi
 
-	[ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/default 0755
-	install_file ${SYSCONFFILE} ${DESTDIR}${ETC}/default/$PRODUCT 0644
-	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
+	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
+	echo "sysconfig file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     IFUPDOWN=ifupdown.debian.sh
 else
     if [ -n "$DESTDIR" ]; then
-	make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+	mkdir -p ${DESTDIR}${SYSCONFDIR}
 
 	if [ -z "$RPM" ]; then
 	    if [ $HOST = suse ]; then
-		make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-up.d 0755
-		make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-down.d 0755
+		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-up.d
+		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-down.d
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
 	    elif [ $HOST = openwrt ]; then
-		# Not implemented on OpenWRT
+		# Not implemented on openwrt
 		/bin/true
 	    else
-		make_parent_directory ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d 0755
+		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
 	    fi
 	fi
     fi
@@ -403,13 +458,13 @@ if [ $HOST != openwrt ]; then
 
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
 
-    make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
+    mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 
-    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown 0544
+    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
 fi
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
-    [ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d 0755
+    [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
     install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
 fi
 
@@ -428,8 +483,8 @@ case $HOST in
     suse)
 	if [ -z "$RPM" ]; then
 	    if [ $configure -eq 0 ]; then
-		make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-up.d 0755
-		make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-down.d 0755
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-up.d/
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d/
 	    fi
 
 	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-up.d/shorewall 0544
@@ -463,17 +518,17 @@ if [ -z "$DESTDIR" ]; then
 	if [ $HOST = debian ]; then
 	    if [ -n "$SERVICEDIR" ]; then
 		if systemctl enable ${PRODUCT}.service; then
-                    echo "$Product will start automatically at boot"
+                    echo "Shorewall Init will start automatically at boot"
 		fi
 	    elif mywhich insserv; then
-		if insserv ${INITDIR}/$PRODUCT; then
-                    echo "$Product will start automatically at boot"
+		if insserv ${INITDIR}/shorewall-init; then
+		    echo "Shorewall Init will start automatically at boot"
 		else
 		    cant_autostart
 		fi
 	    elif mywhich update-rc.d ; then
 		if update-rc.d $PRODUCT enable; then
-                    echo "$Product will start automatically at boot"
+		    echo "$PRODUCT will start automatically at boot"
 		    echo "Set startup=1 in ${CONFDIR}/default/$PRODUCT to enable"
 		else
 		    cant_autostart
@@ -494,31 +549,31 @@ if [ -z "$DESTDIR" ]; then
 	    /bin/true
 	else
 	    if [ -n "$SERVICEDIR" ]; then
-		if systemctl enable ${PRODUCT}.service; then
-		    echo "$Product will start automatically at boot"
+		if systemctl enable shorewall-init.service; then
+		    echo "Shorewall Init will start automatically at boot"
 		fi
 	    elif [ -x ${SBINDIR}/insserv -o -x /usr${SBINDIR}/insserv ]; then
-		if insserv ${INITDIR}/$PRODUCT ; then
-		    echo "$Product will start automatically at boot"
+		if insserv ${INITDIR}/shorewall-init ; then
+		    echo "Shorewall Init will start automatically at boot"
 		else
 		    cant_autostart
 		fi
 	    elif [ -x ${SBINDIR}/chkconfig -o -x /usr${SBINDIR}/chkconfig ]; then
-		if chkconfig --add $PRODUCT ; then
-		    echo "$Product will start automatically at boot"
-		    chkconfig --list $PRODUCT
+		if chkconfig --add shorewall-init ; then
+		    echo "Shorewall Init will start automatically in run levels as follows:"
+		    chkconfig --list shorewall-init
 		else
 		    cant_autostart
 		fi
 	    elif [ -x ${SBINDIR}/rc-update ]; then
-		if rc-update add $PRODUCT default; then
-		    echo "$Product will start automatically at boot"
+		if rc-update add shorewall-init default; then
+		    echo "Shorewall Init will start automatically at boot"
 		else
 		    cant_autostart
 		fi
 	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
 		/etc/init.d/$PRODUCT enable
-		if /etc/init.d/$PRODUCT enabled; then
+		if /etc/init.d/shorewall-init enabled; then
 		    echo "$Product will start automatically at boot"
 		else
 		    cant_autostart
@@ -532,11 +587,11 @@ else
     if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian -a -z "$SERVICEDIR" ]; then
 	    if [ -n "${DESTDIR}" ]; then
-		make_parent_directory ${DESTDIR}/etc/rcS.d 0755
+		mkdir -p ${DESTDIR}/etc/rcS.d
 	    fi
 
-	    ln -sf ../init.d/$PRODUCT ${DESTDIR}${CONFDIR}/rcS.d/S38${PRODUCT}
-	    echo "$Product will start automatically at boot"
+	    ln -sf ../init.d/shorewall-init ${DESTDIR}${CONFDIR}/rcS.d/S38shorewall-init
+	    echo "Shorewall Init will start automatically at boot"
 	fi
     fi
 fi
@@ -547,8 +602,8 @@ if [ -d ${DESTDIR}/etc/ppp ]; then
     case $HOST in
 	debian|suse)
 	    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
-		make_parent_directory ${DESTDIR}/etc/ppp/$directory 0755 #SuSE doesn't create the IPv6 directories
-		cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown ${DESTDIR}${CONFDIR}/ppp/$directory/shorewall
+		mkdir -p ${DESTDIR}/etc/ppp/$directory #SuSE doesn't create the IPv6 directories
+		cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown ${DESTDIR}${CONFDIR}/ppp/$directory/shorewall
 	    done
 	    ;;
 	redhat)
@@ -559,19 +614,19 @@ if [ -d ${DESTDIR}/etc/ppp ]; then
 		FILE=${DESTDIR}/etc/ppp/$file
 		if [ -f $FILE ]; then
 		    if grep -qF Shorewall-based $FILE ; then
-			cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
+			cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown $FILE
 		    else
 			echo "$FILE already exists -- ppp devices will not be handled"
 			break
 		    fi
 		else
-		    cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
+		    cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown $FILE
 		fi
 	    done
 	    ;;
     esac
 fi
 #
-# Report Success
+#  Report Success
 #
 echo "shorewall Init Version $VERSION Installed"

Shorewall-init/uninstall.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall Init
+# Script to back uninstall Shoreline Firewall
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
@@ -26,34 +26,62 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx  #The Build script inserts the actual version
 PRODUCT=shorewall-init
 Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
-    echo "  -n"
+    echo "usage: $ME [ <shorewallrc file> ]"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+remove_file() # $1 = file to restore
+{
+    if [ -f $1 -o -L $1 ] ; then
+	rm -f $1
+	echo "$1 Removed"
+    fi
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-#
-# Source common functions
-#
-. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
-#
-# Parse the run line
-#
 finished=0
 configure=1
 
@@ -90,17 +118,16 @@ while [ $finished -eq 0 ]; do
 	    ;;
     esac
 done
-
 #
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
-        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+	. ~/.shorewallrc || exit 1
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -110,72 +137,72 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file || exit 1
 else
     usage 1
 fi
 
-if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
-    INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
+if [ -f ${SHAREDIR}/shorewall-init/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall-init/version)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
+	echo "WARNING: Shorewall Init Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: $Product Version $VERSION is not installed"
+    echo "WARNING: Shorewall Init Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling $Product $VERSION"
+[ -n "${LIBEXEC:=${SHAREDIR}}" ]
+
+echo "Uninstalling Shorewall Init $VERSION"
 
 [ -n "$SANDBOX" ] && configure=0
 
-[ -n "${LIBEXEC:=${SHAREDIR}}" ]
+INITSCRIPT=${CONFDIR}/init.d/shorewall-init
 
-remove_file  ${SBINDIR}/$PRODUCT
-
-FIREWALL=${CONFDIR}/init.d/$PRODUCT
-
-if [ -f "$FIREWALL" ]; then
+if [ -f "$INITSCRIPT" ]; then
     if [ $configure -eq 1 ]; then
-	if [ $HOST = openwrt ] ; then
-	    if /etc/init.d/$PRODUCT enabled; then
-		/etc/init.d/$PRODUCT disable
+	if [ $HOST = openwrt ]; then
+	    if /etc/init.d/shorewall-init enabled; then
+		/etc/init.d/shorewall-init disable
 	    fi
+	elif mywhich updaterc.d ; then
+	    updaterc.d shorewall-init remove
 	elif mywhich insserv ; then
-            insserv -r $FIREWALL
-	elif mywhich update-rc.d ; then
-	    update-rc.d ${PRODUCT} remove
+            insserv -r $INITSCRIPT
 	elif mywhich chkconfig ; then
-	    chkconfig --del $(basename $FIREWALL)
+	    chkconfig --del $(basename $INITSCRIPT)
 	fi
     fi
 
-    remove_file $FIREWALL
+    remove_file $INITSCRIPT
 fi
 
-[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
 
 if [ -n "$SERVICEDIR" ]; then
-    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
-    remove_file $SERVICEDIR/${PRODUCT}.service
+    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
+    rm -f $SERVICEDIR/shorewall-init.service
 fi
 
 if [ $HOST = openwrt ]; then
-    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
+    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
 else
-    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
+    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
 fi
 
-remove_file ${CONFDIR}/default/$PRODUCT
-remove_file ${CONFDIR}/sysconfig/$PRODUCT
+remove_file ${CONFDIR}/default/shorewall-init
+remove_file ${CONFDIR}/sysconfig/shorewall-init
 
 remove_file ${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall
 
@@ -200,11 +227,10 @@ if [ -d ${CONFDIR}/ppp ]; then
     done
 fi
 
-remove_directory ${SHAREDIR}/$PRODUCT
-remove_directory ${LIBEXECDIR}/$PRODUCT
-remove_file  ${CONFDIR}/logrotate.d/$PRODUCT
+rm -f  ${SBINDIR}/shorewall-init
+rm -rf ${SHAREDIR}/shorewall-init
+rm -rf ${LIBEXECDIR}/shorewall-init
+
+echo "Shorewall Init Uninstalled"
+
 
-#
-# Report Success
-#
-echo "$Product $VERSION Uninstalled"

Shorewall-lite/default.debian

@@ -1,5 +1,5 @@
 # prevent startup with default configuration
-# set the following variable to 1 in order to allow Shorewall-lite to start
+# set the following varible to 1 in order to allow Shorewall-lite to start
 
 startup=0
 
@@ -16,7 +16,7 @@ startup=0
 #    wait_interface=
 
 #
-# Global start/restart/reload/stop options
+# Startup options
 #
 OPTIONS=""
 
@@ -30,16 +30,6 @@ STARTOPTIONS=""
 #
 RESTARTOPTIONS=""
 
-#
-# Reload options
-#
-RELOADOPTIONS=""
-
-#
-# Stop options
-#
-STOPOPTIONS=""
-
 #
 # Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf
 #

Shorewall-lite/default.debian.systemd

@@ -1,26 +0,0 @@
-#
-# Global start/restart/reload/stop options
-#
-OPTIONS=""
-
-#
-# Start options
-#
-STARTOPTIONS=""
-
-#
-# Restart options
-#
-RESTARTOPTIONS=""
-
-#
-# Reload options
-#
-RELOADOPTIONS=""
-
-#
-# Stop options
-#
-STOPOPTIONS=""
-
-# EOF

Shorewall-lite/install.sh

@@ -22,19 +22,62 @@
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx #The Build script inserts the actual version
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
-    echo "  -n"
+    echo "usage: $ME [ <configuration-file> ]"
+    echo "       $ME -v"
+    echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    echo $dir/$1
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+cant_autostart()
+{
+    echo
+    echo  "WARNING: Unable to configure $Product to start automatically at boot" >&2
+}
+
+delete_file() # $1 = file to delete
+{
+    rm -f $1
+}
+
 install_file() # $1 = source $2 = target $3 = mode
 {
     if cp -f $1 $2; then
@@ -53,6 +96,19 @@ install_file() # $1 = source $2 = target $3 = mode
     exit 1
 }
 
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+
+}
+
+require()
+{
+    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
+}
+
 #
 # Change to the directory containing this script
 #
@@ -66,11 +122,6 @@ else
     Product="Shorewall6 Lite"
 fi
 
-#
-# Source common functions
-#
-. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
 #
 # Parse the run line
 #
@@ -117,14 +168,12 @@ done
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
+	. ./shorewallrc || exit 1
 	file=./shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f ~/.shorewallrc ]; then
-	file=~/.shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
+	. ~/.shorewallrc
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	file=/usr/share/shorewall/shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -134,11 +183,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
@@ -269,7 +318,8 @@ case "$HOST" in
     linux)
 	;;
     *)
-	fatal_error "ERROR: Unknown HOST \"$HOST\""
+	echo "ERROR: Unknown HOST \"$HOST\"" >&2
+	exit 1;
 	;;
 esac
 
@@ -281,7 +331,7 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
 
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    make_directory ${DESTDIR}${INITDIR} 755
 
 else
     if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
@@ -321,20 +371,25 @@ fi
 
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
-[ -n "${INITFILE}" ] && make_parent_directory ${DESTDIR}${INITDIR} 0755
+[ -n "${INITFILE}" ] && make_directory ${DESTDIR}${INITDIR} 755
 
 #
 # Create ${CONFDIR}/$PRODUCT, /usr/share/$PRODUCT and /var/lib/$PRODUCT if needed
 #
-make_parent_directory ${DESTDIR}${CONFDIR}/$PRODUCT 0755
-make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
-make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
-make_parent_directory ${DESTDIR}${SBINDIR} 0755
-make_parent_directory ${DESTDIR}${VARDIR} 0755
+mkdir -p ${DESTDIR}${CONFDIR}/$PRODUCT
+mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT
+mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
+mkdir -p ${DESTDIR}${SBINDIR}
+mkdir -p ${DESTDIR}${VARDIR}
+
+chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
 
 if [ -n "$DESTDIR" ]; then
-    make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
+    mkdir -p ${DESTDIR}${INITDIR}
+    chmod 755 ${DESTDIR}${INITDIR}
 fi
 
 if [ -n "$INITFILE" ]; then
@@ -355,9 +410,9 @@ if [ -z "${SERVICEDIR}" ]; then
 fi
 
 if [ -n "$SERVICEDIR" ]; then
-    make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
@@ -386,14 +441,8 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 #
 for f in lib.* ; do
     if [ -f $f ]; then
-        case $f in
-            *installer)
-                ;;
-            *)
-                install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-                echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
-                ;;
-        esac
+	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+	echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
     fi
 done
 
@@ -421,12 +470,12 @@ if [ -f modules ]; then
 fi
 
 if [ -f helpers ]; then
-    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 0600
+    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 600
     echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
 fi
 
 for f in modules.*; do
-    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 644
     echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
 done
 
@@ -437,19 +486,19 @@ done
 if [ -d manpages -a -n "$MANDIR" ]; then
     cd manpages
 
-    make_parent_directory ${DESTDIR}${MANDIR}/man5 0755
+    mkdir -p ${DESTDIR}${MANDIR}/man5/
 
     for f in *.5; do
 	gzip -c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 0644
+	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
-    make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
+    mkdir -p ${DESTDIR}${MANDIR}/man8/
 
     for f in *.8; do
 	gzip -c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
@@ -459,7 +508,7 @@ if [ -d manpages -a -n "$MANDIR" ]; then
 fi
 
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 644
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -467,7 +516,7 @@ fi
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}${SHAREDIR}/$PRODUCT/version
-chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
+chmod 644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 #
 # Remove and create the symbolic link to the init script
 #
@@ -490,7 +539,10 @@ ln -sf shorewall ${DESTDIR}${SBINDIR}/${PRODUCT}
 # Note -- not all packages will have the SYSCONFFILE so we need to check for its existance here
 #
 if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
-    [ ${DESTDIR} ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+    if [ ${DESTDIR} ]; then
+	mkdir -p ${DESTDIR}${SYSCONFDIR}
+	chmod 755 ${DESTDIR}${SYSCONFDIR}
+    fi
 
     install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
     echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
@@ -558,6 +610,6 @@ if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${
 fi
 
 #
-# Report Success
+#  Report Success
 #
 echo "$Product Version $VERSION Installed"

Shorewall-lite/shorewall-lite.service.debian

@@ -16,7 +16,7 @@ RemainAfterExit=yes
 EnvironmentFile=-/etc/default/shorewall-lite
 StandardOutput=syslog
 ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall-lite $OPTIONS clear
+ExecStop=/sbin/shorewall-lite $OPTIONS stop
 ExecReload=/sbin/shorewall-lite $OPTIONS reload $RELOADOPTIONS
 
 [Install]

Shorewall-lite/uninstall.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall Lite
+# Script to back uninstall Shoreline Firewall
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
@@ -26,7 +26,9 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx  #The Build script inserts the actual version
+PRODUCT=shorewall-lite
+Product="Shorewall Lite"
 
 usage() # $1 = exit status
 {
@@ -39,27 +41,46 @@ usage() # $1 = exit status
     exit $1
 }
 
-#
-# Change to the directory containing this script
-#
-cd "$(dirname $0)"
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
 
-if [ -f shorewall-lite.service ]; then
-    PRODUCT=shorewall-lite
-    Product="Shorewall Lite"
-else
-    PRODUCT=shorewall6-lite
-    Product="Shorewall6 Lite"
-fi
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
 
-#
-# Source common functions
-#
-. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+remove_file() # $1 = file to restore
+{
+    if [ -f $1 -o -L $1 ] ; then
+	rm -f $1
+	echo "$1 Removed"
+    fi
+}
 
-#
-# Parse the run line
-#
 finished=0
 configure=1
 
@@ -76,7 +97,7 @@ while [ $finished -eq 0 ]; do
 			usage 0
 			;;
 		    v)
-			echo "$Product Firewall Uninstaller Version $VERSION"
+			echo "$Product Firewall Installer Version $VERSION"
 			exit 0
 			;;
 		    n*)
@@ -96,17 +117,16 @@ while [ $finished -eq 0 ]; do
 	    ;;
     esac
 done
-
 #
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
-        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+	. ~/.shorewallrc || exit 1
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -116,50 +136,46 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
 
-if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
-    INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
+if [ -f ${SHAREDIR}/shorewall-lite/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall-lite/version)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
+	echo "WARNING: Shorewall Lite Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: $Product Version $VERSION is not installed"
+    echo "WARNING: Shorewall Lite Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling $Product $VERSION"
+echo "Uninstalling Shorewall Lite $VERSION"
 
 [ -n "$SANDBOX" ] && configure=0
 
 if [ $configure -eq 1 ]; then
     if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
-	${SBINDIR}/$PRODUCT clear
-    elif qt ip6tables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall6 ]; then
-	${SBINDIR}/$PRODUCT clear
+	shorewall-lite clear
     fi
 fi
 
-remove_file ${SBINDIR}/$PRODUCT
-
-if [ -L ${SHAREDIR}/$PRODUCT/init ]; then
+if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
     if [ $HOST = openwrt ]; then
-	if [ $configure -eq 1 ] && /etc/init.d/$PRODUCT enabled; then
-	    /etc/init.d/$PRODUCT disable
+	if [ $configure -eq 1 ] && /etc/init.d/shorewall-lite enabled; then
+	    /etc/init.d/shorewall-lite disable
 	fi
 	
-	FIREWALL=$(readlink ${SHAREDIR}/$PRODUCT/init)
+	FIREWALL=$(readlink ${SHAREDIR}/shorewall-lite/init)
     else
-	FIREWALL=$(readlink -m -q ${SHAREDIR}/$PRODUCT/init)
+	FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
     fi
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
@@ -167,10 +183,10 @@ fi
 
 if [ -f "$FIREWALL" ]; then
     if [ $configure -eq 1 ]; then
-	if mywhich insserv ; then
+	if mywhich updaterc.d ; then
+	    updaterc.d shorewall-lite remove
+	elif mywhich insserv ; then
             insserv -r $FIREWALL
-	elif mywhich update-rc.d ; then
-	    update-rc.d ${PRODUCT} remove
 	elif mywhich chkconfig ; then
 	    chkconfig --del $(basename $FIREWALL)
 	fi
@@ -179,29 +195,26 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
+[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
 
 if [ -n "$SERVICEDIR" ]; then
-    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
-    remove_file $SERVICEDIR/${PRODUCT}.service
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
+    rm -f $SERVICEDIR/shorewall-lite.service
 fi
 
-remove_directory ${CONFDIR}/$PRODUCT
-remove_directory ${VARDIR}
-remove_directory ${SHAREDIR}/$PRODUCT
-remove_directory ${LIBEXECDIR}/$PRODUCT
-remove_file  ${CONFDIR}/logrotate.d/$PRODUCT
+rm -f ${SBINDIR}/shorewall-lite
 
-if [ -n "$SYSCONFDIR" ]; then
-    [ -n "$SYSCONFFILE" ] && remove_file ${SYSCONFDIR}/${PRODUCT}
-fi
+rm -rf ${CONFDIR}/shorewall-lite
+rm -rf ${VARDIR}
+rm -rf ${SHAREDIR}/shorewall-lite
+rm -rf ${LIBEXECDIR}/shorewall-lite
+rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
+rm -f  ${SYSCONFDIR}/shorewall-lite
 
 if [ -n "${MANDIR}" ]; then
-    remove_file_with_wildcard ${MANDIR}/man5/${PRODUCT}\*
-    remove_file_with_wildcard ${MANDIR}/man8/${PRODUCT}\*
+    rm -f ${MANDIR}/man5/shorewall-lite*
+    rm -f ${MANDIR}/man8/shorewall-lite*
 fi
 
-#
-# Report Success
-#
-echo "$Product $VERSION Uninstalled"
+echo "Shorewall Lite Uninstalled"
+

Shorewall/Actions/action.A_AllowICMPs.deprecated

@@ -1,9 +0,0 @@
-#
-# Shorewall6 -- /usr/share/shorewall/action.A_AllowICMPs
-#
-# This action A_ACCEPTs needed ICMP types
-#
-###############################################################################
-#ACTION		SOURCE		DEST	PROTO		DPORT
-
-AllowICMPs(A_ACCEPT)

Shorewall/Actions/action.A_Drop

@@ -12,8 +12,6 @@
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 #
-?require AUDIT_TARGET
-?warning "You are using the deprecated A_Drop default action. Please see http://www.shorewall.net/Actions.html
 ###############################################################################
 #ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
 #
@@ -32,10 +30,9 @@ Auth(A_DROP)
 #
 A_AllowICMPs	-	-	icmp
 #
-# Don't log broadcasts and multicasts
+# Don't log broadcasts
 #
 dropBcast(audit)
-dropMcast(audit)
 #
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log.

Shorewall/Actions/action.A_REJECT

@@ -22,9 +22,8 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-# A_REJECT[([<option>])] where <option> is a valid REJECT option.#
+# A_REJECTWITH[([<option>])] where <option> is a valid REJECT option.#
 ###############################################################################
-?require AUDIT_TARGET
 
 DEFAULTS -
 

Shorewall/Actions/action.A_REJECT!

@@ -22,9 +22,8 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-# A_REJECT[([<option>])] where <option> is a valid REJECT option.#
+# A_REJECTWITH[([<option>])] where <option> is a valid REJECT option.#
 ###############################################################################
-?require AUDIT_TARGET
 
 DEFAULTS -
 

Shorewall/Actions/action.A_Reject.deprecated

@@ -11,8 +11,6 @@
 #    internet operation are always ACCEPTed.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
-?require AUDIT_TARGET
-?warning "You are using the deprecated A_REJECT default action. Please see http://www.shorewall.net/Actions.html
 ###############################################################################
 #ACTION		SOURCE	DEST	PROTO
 #
@@ -27,11 +25,10 @@ COUNT
 #
 A_AllowICMPs	-	-	icmp
 #
-# Drop Broadcasts and multicasts so they don't clutter up the log
-# (these must *not* be rejected).
+# Drop Broadcasts so they don't clutter up the log
+# (broadcasts must *not* be rejected).
 #
 dropBcast(audit)
-dropMcast(audit)
 #
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log (these ICMPs cannot be

Shorewall/Actions/action.AllowICMPs

@@ -1,45 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.AllowICMPs
-#
-# This action ACCEPTs needed ICMP types.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-DEFAULTS ACCEPT
-
-?if __IPV4
-    @1	-	-	icmp	fragmentation-needed	{comment="Needed ICMP types"}
-    @1	-	-	icmp	time-exceeded		{comment="Needed ICMP types"}
-?else
-?COMMENT Needed ICMP types (RFC4890)
-
-    @1	-		-	ipv6-icmp	destination-unreachable
-    @1	-		-	ipv6-icmp	packet-too-big
-    @1	-		-	ipv6-icmp	time-exceeded
-    @1	-		-	ipv6-icmp	parameter-problem
-
-# The following should have a ttl of 255 and must be allowed to transit a bridge
-    @1	-		-	ipv6-icmp	router-solicitation
-    @1	-		-	ipv6-icmp	router-advertisement
-    @1	-		-	ipv6-icmp	neighbour-solicitation
-    @1	-		-	ipv6-icmp	neighbour-advertisement
-    @1	-		-	ipv6-icmp	137	# Redirect
-    @1	-		-	ipv6-icmp	141	# Inverse neighbour discovery solicitation
-    @1	-		-	ipv6-icmp	142	# Inverse neighbour discovery advertisement
-
-# The following should have a link local source address and must be allowed to transit a bridge
-    @1	fe80::/10	-	ipv6-icmp	130	# Listener query
-    @1	fe80::/10	-	ipv6-icmp	131	# Listener report
-    @1	fe80::/10	-	ipv6-icmp	132	# Listener done
-    @1	fe80::/10	-	ipv6-icmp	143	# Listener report v2
-
-# The following should be received with a ttl of 255 and must be allowed to transit a bridge
-    @1	-		-	ipv6-icmp	148	# Certificate path solicitation
-    @1	-		-	ipv6-icmp	149	# Certificate path advertisement
-
-# The following should have a link local source address and a ttl of 1 and must be allowed to transit abridge
-    @1	fe80::/10	-	ipv6-icmp	151	# Multicast router advertisement
-    @1	fe80::/10	-	ipv6-icmp	152	# Multicast router solicitation
-    @1	fe80::/10	-	ipv6-icmp	153	# Multicast router termination
-?endif

Shorewall/Actions/action.BLACKLIST

@@ -1,50 +0,0 @@
-#
-# Shorewall - /usr/share/shorewall/action.BLACKLIST
-#
-# This action:
-#
-#   - Adds the sender to the dynamic blacklist ipset
-#   - Optionally acts on the packet (default is DROP)
-#
-# Parameters:
-#
-# 1 - Action to take after adding the packet. Default is DROP.
-#     Pass -- if you don't want to take any action.
-# 2 - Timeout for ipset entry. Default is the timeout specified in
-#     DYNAMIC_BLACKLIST or the one specified when the ipset was created.
-#
-###############################################################################
-# Note -- This action is defined with the 'section' option, so the first
-#         parameter is always the section name. That means that in the
-#         following text, the first parameter passed in the rule is actually
-#         @2.
-###############################################################################
-?if $1 eq 'BLACKLIST'
-   ?if $BLACKLIST_LOG_LEVEL
-       blacklog
-   ?else
-       $BLACKLIST_DISPOSITION
-   ?endif
-?else
-   ?if ! "$SW_DBL_IPSET"
-   ?   error The BLACKLIST action may only be used with ipset-based dynamic blacklisting
-   ?endif
-
-   DEFAULTS -,DROP,-
-   #
-   # Add to the blacklist
-   #
-   ?if passed(@3)
-       ADD($SW_DBL_IPSET:src:@3)
-   ?elsif $SW_DBL_TIMEOUT
-       ADD($SW_DBL_IPSET:src:$SW_DBL_TIMEOUT)
-   ?else
-       ADD($SW_DBL_IPSET:src)
-   ?endif
-   #
-   # Dispose of the packet if asked
-   #
-   ?if passed(@2)
-      @2
-   ?endif
-?endif

Shorewall/Actions/action.Broadcast

@@ -20,7 +20,7 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-# Broadcast[([<action>|[,{audit|-}])]
+# Broadcast[([<action>|-[,{audit|-}])]
 #
 # Default action is DROP
 #
@@ -29,37 +29,31 @@
 DEFAULTS DROP,-
 
 ?if __ADDRTYPE
-    @1	-	-	-	;; -m addrtype --dst-type BROADCAST
-    @1	-	-	-	;; -m addrtype --dst-type ANYCAST
+@1	-	-	-	;; -m addrtype --dst-type BROADCAST
+@1	-	-	-	;; -m addrtype --dst-type MULTICAST
+@1	-	-	-	;; -m addrtype --dst-type ANYCAST
 ?else
-    ?begin perl;
+?begin perl;
 
-    use strict;
-    use Shorewall::IPAddrs;
-    use Shorewall::Config;
-    use Shorewall::Chains;
+use Shorewall::IPAddrs;
+use Shorewall::Config;
+use Shorewall::Chains;
 
-    my ( $action, $audit ) = get_action_params( 2 );
-    my $chainref           = get_action_chain;
-    my ( $level, $tag )    = get_action_logging;
+my ( $action )         = get_action_params( 1 );
+my $chainref           = get_action_chain;
+my ( $level, $tag )    = get_action_logging;
 
-    fatal_error "Invalid parameter to action Broadcast" if supplied $audit && $audit ne 'audit';
+add_commands $chainref, 'for address in $ALL_BCASTS; do';
+incr_cmd_level $chainref;
+log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
+add_jump $chainref, $action, 0, "-d \$address ";
+decr_cmd_level $chainref;
+add_commands $chainref, 'done';
 
-    my $target             = require_audit ( $action , $audit );
+log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d 224.0.0.0/4 ' if $level ne '';
+add_jump $chainref, $action, 0, '-d 224.0.0.0/4 ';
 
-    if ( $family == F_IPV4 ) {
-        add_commands $chainref, 'for address in $ALL_BCASTS; do';
-    } elsif ($family == F_IPV6 ) {
-        add_commands $chainref, 'for address in $ALL_ACASTS; do';
-    }
+1;
 
-    incr_cmd_level $chainref;
-    log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
-    add_jump $chainref, $target, 0, "-d \$address ";
-    decr_cmd_level $chainref;
-    add_commands $chainref, 'done';
-
-    1;
-
-    ?end perl;
+?end perl;
 ?endif

Shorewall/Actions/action.Drop

@@ -1,7 +1,7 @@
 #
 # Shorewall -- /usr/share/shorewall/action.Drop
 #
-# The former default DROP common rules. Use of this action is now deprecated
+# The default DROP common rules
 #
 # This action is invoked before a DROP policy is enforced. The purpose
 # of the action is:
@@ -20,7 +20,7 @@
 #     depending on the setting of the first parameter.
 # 4 - Action to take with required ICMP packets. Default is ACCEPT or
 #     A_ACCEPT depending on the first parameter.
-# 5 - Action to take with late DNS replies (UDP source port 53). Default
+# 5 - Action to take with late UDP replies (UDP source port 53). Default
 #     is DROP or A_DROP depending on the first parameter.
 # 6 - Action to take with UPnP packets. Default is DROP or A_DROP
 #     depending on the first parameter.
@@ -28,7 +28,6 @@
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 #
 ###############################################################################
-?warning "You are using the deprecated Drop default action. Please see http://www.shorewall.net/Actions.html#Default"
 
 ?if passed(@1)
     ?if @1 eq 'audit'
@@ -59,10 +58,9 @@ Auth(@2)
 #
 AllowICMPs(@4)	-	-	icmp
 #
-# Don't log broadcasts or multicasts
+# Don't log broadcasts
 #
 Broadcast(DROP,@1)
-Multicast(DROP,@1)
 #
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log.

Shorewall/Actions/action.DropDNSrep

@@ -1,10 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.DropDNSrep
-#
-# This macro silently drops DNS UDP replies that are in the New state
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-DEFAULTS DROP
-@1	-	-	udp	-	53 { comment="Late DNS Replies" }

Shorewall/Actions/action.GlusterFS

@@ -13,9 +13,9 @@
 DEFAULTS 2,0
 
 ?if @1 !~ /^\d+/ || ! @1 || @1 > 1024
-    ?error Invalid value (@1) for the GlusterFS Bricks argument
+    ?error Invalid value for Bricks (@1)
 ?elsif @2 !~ /^[01]$/
-    ?error Invalid value (@2) for the GlusterFS IB argument
+    ?error Invalid value for IB (@2)
 ?endif
 
 #ACTION		SOURCE		DEST		PROTO	DPORT

Shorewall/Actions/action.Limit

@@ -1,70 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.Limit
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Limit(<recent-set>,<num-connections>,<timeout>)
-#
-###############################################################################
-
-DEFAULTS -,-,-
-
-?begin perl
-
-use strict;
-use Shorewall::Config;
-use Shorewall::Chains;
-
-my $chainref        = get_action_chain;
-my @param           = get_action_params(3);
-my ( $level, $tag ) = get_action_logging;
-
-@param = split( ',', $tag ), $tag = $param[0] unless supplied( join '', @param );
-
-fatal_error 'Limit rules must include <set name>,<max connections>,<interval> as the log tag or as parameters' unless @param == 3;
-
-my $set   = $param[0];
-
-for ( @param[1,2] ) {
-    fatal_error 'Max connections and interval in Limit rules must be numeric (' . join( ':', 'Limit', $level eq '' ? 'none' : $level, $tag ) . ')' unless /^\d+$/
-}
-
-my $count = $param[1] + 1;
-
-require_capability( 'RECENT_MATCH' , 'Limit rules' , '' );
-
-warning_message "The Limit action is deprecated in favor of per-IP rate limiting using the RATE LIMIT column";
-
-add_irule $chainref, recent => "--name $set --set";
-
-if ( $level ne '' ) {
-    my $xchainref = new_chain 'filter' , "$chainref->{name}%";
-    log_irule_limit( $level, $xchainref, '', 'DROP', [], $tag, 'add' , '' );
-    add_ijump $xchainref, j => 'DROP';
-    add_ijump $chainref,  j => $xchainref, recent => "--name $set --update --seconds $param[2] --hitcount $count";
-} else {
-    add_ijump $chainref, j => 'DROP', recent => "--update --name $set --seconds $param[2] --hitcount $count";
-}
-
-add_ijump $chainref, j => 'ACCEPT';
-
-1;
-
-?end perl

Shorewall/Actions/action.Multicast

@@ -1,56 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.Multicast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Multicast[([<action>|-[,{audit|-}])]
-#
-# Default action is DROP
-#
-###############################################################################
-
-DEFAULTS DROP,-
-
-?if __ADDRTYPE
-    @1	-	-	-	;; -m addrtype --dst-type MULTICAST
-?else
-    ?begin perl;
-
-    use strict;
-    use Shorewall::IPAddrs;
-    use Shorewall::Config;
-    use Shorewall::Chains;
-
-    my ( $action, $audit ) = get_action_params( 2 );
-    my $chainref           = get_action_chain;
-    my ( $level, $tag )    = get_action_logging;
-
-    fatal_error "Invalid parameter to action Multicast" if supplied $audit && $audit ne 'audit';
-
-    my $target = require_audit ( $action , $audit );
-    my $dest   = ( $family == F_IPV4 ) ? join( ' ', '-d', IPv4_MULTICAST . ' ' ) : join( ' ', '-d', IPv6_MULTICAST . ' ' );
-
-    log_rule_limit( $level, $chainref, 'Multicast' , $action, '', $tag, 'add', $dest ) if $level ne '';
-    add_jump $chainref, $target, 0, $dest;
-
-    1;
-
-    ?end perl;
-?endif

Shorewall/Actions/action.Reject

@@ -1,7 +1,7 @@
 #
 # Shorewall -- /usr/share/shorewall/action.Reject
 #
-# The former default REJECT action common rules. Use of this action is deprecated.
+# The default REJECT action common rules
 #
 # This action is invoked before a REJECT policy is enforced. The purpose
 # of the action is:
@@ -20,14 +20,13 @@
 #     depending on the setting of the first parameter.
 # 4 - Action to take with required ICMP packets. Default is ACCEPT or
 #     A_ACCEPT depending on the first parameter.
-# 5 - Action to take with late DNS replies (UDP source port 53). Default
+# 5 - Action to take with late UDP replies (UDP source port 53). Default
 #     is DROP or A_DROP depending on the first parameter.
 # 6 - Action to take with UPnP packets. Default is DROP or A_DROP
 #     depending on the first parameter.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 ###############################################################################
-?warning "You are using the deprecated Reject default action. Please see http://www.shorewall.net/Actions.html#Default"
 
 ?if passed(@1)
     ?if @1 eq 'audit'
@@ -62,7 +61,6 @@ AllowICMPs(@4)	-	-	icmp
 # (broadcasts must *not* be rejected).
 #
 Broadcast(DROP,@1)
-Multicast(DROP,@1)
 #
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log (these ICMPs cannot be

Shorewall/Actions/action.allowBcast

@@ -1,38 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.allowBcast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# allowBcast[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Broadcast(A_ACCEPT)
-    ?else
-	?error "Invalid argument (@1) to allowBcast"
-    ?endif
-?else
-    Broadcast(ACCEPT)
-?endif

Shorewall/Actions/action.allowMcast

@@ -1,38 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.allowMcast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# allowMcast[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Multicast(A_ACCEPT)
-    ?else
-	?error "Invalid argument (@1) to allowMcast"
-    ?endif
-?else
-    Multicast(ACCEPT)
-?endif

Shorewall/Actions/action.allowinUPnP

@@ -1,40 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.allowinUPnP
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# allowinUPnP[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	A_ACCEPT - - 17 1900
-	A_ACCEPT - -  6 49152
-    ?else
-	?error "Invalid argument (@1) to allowinUPnP"
-    ?endif
-?else
-    ACCEPT - - 17 1900
-    ACCEPT - -	6 49152
-?endif

Shorewall/Actions/action.dropBcast

@@ -1,39 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.dropBcast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# dropBcast[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Broadcast(A_DROP)
-    ?else
-	?error "Invalid argument (@1) to dropBcast"
-    ?endif
-?else
-    Broadcast(DROP)
-?endif
-

Shorewall/Actions/action.dropMcast

@@ -1,38 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.dropMcast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# dropMcast[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Multicast(A_DROP)
-    ?else
-	?error "Invalid argument (@1) to dropMcast"
-    ?endif
-?else
-    Multicast(DROP)
-?endif

Shorewall/Actions/action.dropNotSyn

@@ -1,38 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.dropNotSyn
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# dropNotSyn[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	A_DROP {proto=6:!syn}
-    ?else
-	?error "Invalid argument (@1) to dropNotSyn"
-    ?endif
-?else
-    DROP {proto=6:!syn}
-?endif

Shorewall/Actions/action.forwardUPnP

@@ -1,43 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.forwardUPnP
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# forwardUPnP
-#
-###############################################################################
-
-DEFAULTS -
-
-?begin perl
-
-use strict;
-use Shorewall::Config;
-use Shorewall::Chains;
-
-my $chainref = get_action_chain;
-
-set_optflags( $chainref, DONT_OPTIMIZE );
-
-add_commands( $chainref , '[ -f ${VARDIR}/.forwardUPnP ] && cat ${VARDIR}/.forwardUPnP >&3' );
-
-1;
-
-?end perl

Shorewall/Actions/action.rejNotSyn

@@ -1,39 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.rejNotSyn
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# rejNotSyn[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	A_REJECT {proto=6:!syn}
-    ?else
-	?error "Invalid argument (@1) to rejNotSyn"
-    ?endif
-?else
-    REJECT(tcp-reset) {proto=6:!syn}
-?endif
-

Shorewall/Macros/macro.AllowICMPs

@@ -0,0 +1,13 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.AllowICMPs
+#
+# This macro ACCEPTs needed ICMP types.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+?COMMENT Needed ICMP types
+
+DEFAULT ACCEPT
+PARAM	-	-	icmp	fragmentation-needed
+PARAM	-	-	icmp	time-exceeded

Shorewall/Macros/macro.BLACKLIST

@@ -0,0 +1,13 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.blacklist
+#
+# This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+?if $BLACKLIST_LOGLEVEL
+blacklog
+?else
+$BLACKLIST_DISPOSITION
+?endif

Shorewall/Macros/macro.Drop

@@ -0,0 +1,49 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.Drop
+#
+# This macro generates the same rules as the Drop default action
+# It is used in place of action.Drop when USE_ACTIONS=No.
+#
+# Example:
+#
+#	Drop	net	all
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#
+# Don't log 'auth' DROP
+#
+DROP	-	-	tcp	113
+#
+# Drop Broadcasts so they don't clutter up the log
+# (broadcasts must *not* be rejected).
+#
+dropBcast
+#
+# ACCEPT critical ICMP types
+#
+ACCEPT	-	-	icmp	fragmentation-needed
+ACCEPT	-	-	icmp	time-exceeded
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log (these ICMPs cannot be
+# rejected).
+#
+dropInvalid
+#
+# Drop Microsoft noise so that it doesn't clutter up the log.
+#
+DROP	-	-	udp	135,445
+DROP	-	-	udp	137:139
+DROP	-	-	udp	1024:	137
+DROP	-	-	tcp	135,139,445
+DROP	-	-	udp	1900
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+dropNotSyn
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+DROP	-	-	udp	-	53

Shorewall/Macros/macro.DropDNSrep

@@ -0,0 +1,12 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.DropDNSrep
+#
+# This macro silently drops DNS UDP replies
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+?COMMENT Late DNS Replies
+
+DEFAULT DROP
+PARAM	-	-	udp	-	53

Shorewall/Macros/macro.Reject

@@ -0,0 +1,49 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.Reject
+#
+# This macro generates the same rules as the Reject default action
+# It is used in place of action.Reject when USE_ACTIONS=No.
+#
+# Example:
+#
+#	Reject	loc	fw
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#
+# Don't log 'auth' REJECT
+#
+REJECT	-	-	tcp	113
+#
+# Drop Broadcasts so they don't clutter up the log
+# (broadcasts must *not* be rejected).
+#
+dropBcast
+#
+# ACCEPT critical ICMP types
+#
+ACCEPT	-	-	icmp	fragmentation-needed
+ACCEPT	-	-	icmp	time-exceeded
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log (these ICMPs cannot be
+# rejected).
+#
+dropInvalid
+#
+# Reject Microsoft noise so that it doesn't clutter up the log.
+#
+REJECT	-	-	udp	135,445
+REJECT	-	-	udp	137:139
+REJECT	-	-	udp	1024:	137
+REJECT	-	-	tcp	135,139,445
+DROP	-	-	udp	1900
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+dropNotSyn
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+DROP	-	-	udp	-	53

Shorewall/Perl/Shorewall/Accounting.pm

@@ -519,9 +519,9 @@ sub setup_accounting() {
 
 		while ( $chainswithjumps && $progress ) {
 		    $progress = 0;
-		    for my $chain1 ( keys %accountingjumps ) {
+		    for my $chain1 ( sort  keys %accountingjumps ) {
 			if ( keys %{$accountingjumps{$chain1}} ) {
-			    for my $chain2 ( keys %{$accountingjumps{$chain1}} ) {
+			    for my $chain2 ( sort keys %{$accountingjumps{$chain1}} ) {
 				delete $accountingjumps{$chain1}{$chain2}, $progress = 1 unless $accountingjumps{$chain2};
 			    }
 			} else {

Shorewall/Perl/Shorewall/Chains.pm

@@ -1223,7 +1223,7 @@ sub merge_rules( $$$ ) {
 	}
     }
 
-    for my $option ( grep ! $opttype{$_} || $_ eq 'nfacct' || $_ eq 'recent', keys %$fromref ) {
+    for my $option ( grep ! $opttype{$_} || $_ eq 'nfacct' || $_ eq 'recent', sort { $b cmp $a } keys %$fromref ) {
 	set_rule_option( $toref, $option, $fromref->{$option} );
     }
 
@@ -1239,7 +1239,7 @@ sub merge_rules( $$$ ) {
 
     set_rule_option( $toref, 'policy', $fromref->{policy} ) if exists $fromref->{policy};
 
-    for my $option ( grep( get_opttype( $_, 0 ) == EXPENSIVE, keys %$fromref ) ) {
+    for my $option ( grep( get_opttype( $_, 0 ) == EXPENSIVE, sort keys %$fromref ) ) {
 	set_rule_option( $toref, $option, $fromref->{$option} );
     }
 
@@ -3691,7 +3691,7 @@ sub optimize_level8( $$$ ) {
 	}
 
 	if ( $progress ) {
-	    my @rename = keys %rename;
+	    my @rename = sort keys %rename;
 	    #
 	    # First create aliases for each renamed chain and change the {name} member.
 	    #
@@ -4556,8 +4556,7 @@ sub do_proto( $$$;$ )
 
     if ( $proto ne '' ) {
 
-	my $synonly  = ( $proto =~ s/:(!)?syn$//i );
-	my $notsyn   = $1;
+	my $synonly  = ( $proto =~ s/:syn$//i );
 	my $invert   = ( $proto =~ s/^!// ? '! ' : '' );
 	my $protonum = resolve_proto $proto;
 
@@ -4575,7 +4574,7 @@ sub do_proto( $$$;$ )
 		$output  = "${invert}-p ${proto} ";
 	    } else {
 		fatal_error '":syn" is only allowed with tcp' unless $proto == TCP && ! $invert;
-		$output = $notsyn ? "-p $proto ! --syn " : "-p $proto --syn ";
+		$output = "-p $proto --syn ";
 	    }
 
 	    fatal_error "SOURCE/DEST PORT(S) not allowed with PROTO !$pname" if $invert && ($ports ne '' || $sports ne '');
@@ -6981,13 +6980,13 @@ sub set_global_variables( $$ ) {
     if ( $conditional ) {
 	my ( $interface, @interfaces );
 
-	@interfaces = keys %interfaceaddr;
+	@interfaces = sort keys %interfaceaddr;
 
 	for $interface ( @interfaces ) {
 	    emit( qq([ -z "\$interface" -o "\$interface" = "$interface" ] && $interfaceaddr{$interface}) );
 	}
 
-	@interfaces = keys %interfacegateways;
+	@interfaces = sort keys %interfacegateways;
 
 	for $interface ( @interfaces ) {
 	    emit( qq(if [ -z "\$interface" -o "\$interface" = "$interface" ]; then) );
@@ -6997,36 +6996,36 @@ sub set_global_variables( $$ ) {
 	    emit( qq(fi\n) );
 	}
 
-	@interfaces = keys %interfacemacs;
+	@interfaces = sort keys %interfacemacs;
 
 	for $interface ( @interfaces ) {
 	    emit( qq([ -z "\$interface" -o "\$interface" = "$interface" ] && $interfacemacs{$interface}) );
 	}
     } else {
-	emit $_     for values %interfaceaddr;
-	emit "$_\n" for values %interfacegateways;
-	emit $_     for values %interfacemacs;
+	emit $_     for sort values %interfaceaddr;
+	emit "$_\n" for sort values %interfacegateways;
+	emit $_     for sort values %interfacemacs;
     }
 
     if ( $setall ) {
-	emit $_ for values %interfaceaddrs;
-	emit $_ for values %interfacenets;
+	emit $_ for sort values %interfaceaddrs;
+	emit $_ for sort values %interfacenets;
 
 	unless ( have_capability( 'ADDRTYPE' ) ) {
 
 	    if ( $family == F_IPV4 ) {
 		emit 'ALL_BCASTS="$(get_all_bcasts) 255.255.255.255"';
-		emit $_ for values %interfacebcasts;
+		emit $_ for sort values %interfacebcasts;
 	    } else {
 		emit 'ALL_ACASTS="$(get_all_acasts)"';
-		emit $_ for values %interfaceacasts;
+		emit $_ for sort values %interfaceacasts;
 	    }
 	}
     }
 }
 
 sub verify_address_variables() {
-    for my $variable ( keys %address_variables ) {
+    for my $variable ( sort keys %address_variables ) {
 	my $type = $address_variables{$variable};
 	my $address = "\$$variable";
 
@@ -7943,7 +7942,7 @@ sub add_interface_options( $ ) {
 	#
 	# Generate a digest for each chain
 	#
-	for my $chainref ( values %input_chains, values %forward_chains ) {
+	for my $chainref ( sort { $a->{name} cmp $b->{name} } values %input_chains, values %forward_chains ) {
 	    my $digest = '';
 
 	    assert( $chainref );
@@ -7962,7 +7961,7 @@ sub add_interface_options( $ ) {
 	# Insert jumps to the interface chains into the rules chains
 	#
 	for my $zone1 ( off_firewall_zones ) {
-	    my @input_interfaces   = keys %{zone_interfaces( $zone1 )};
+	    my @input_interfaces   = sort keys %{zone_interfaces( $zone1 )};
 	    my @forward_interfaces = @input_interfaces;
 
 	    if ( @input_interfaces > 1 ) {
@@ -8048,7 +8047,7 @@ sub add_interface_options( $ ) {
 	for my $zone1 ( firewall_zone, vserver_zones ) {
 	    for my $zone2 ( off_firewall_zones ) {
 		my $chainref = $filter_table->{rules_chain( $zone1, $zone2 )};
-		my @interfaces = keys %{zone_interfaces( $zone2 )};
+		my @interfaces = sort keys %{zone_interfaces( $zone2 )};
 		my $chain1ref;
 
 		for my $interface ( @interfaces ) {
@@ -8454,7 +8453,7 @@ sub create_save_ipsets() {
 	    #
 	    $ipsets{$_} = 1 for ( @ipsets, @{$globals{SAVED_IPSETS}} );
 
-	    my @sets = keys %ipsets;
+	    my @sets = sort keys %ipsets;
 
 	    emit( '' ,
 		  '    rm -f $file' ,
@@ -8630,7 +8629,7 @@ sub create_load_ipsets() {
 #
 sub create_nfobjects() {
     
-    my @objects = ( keys %nfobjects );
+    my @objects = ( sort keys %nfobjects );
 
     if ( @objects ) {
 	if ( $config{NFACCT} ) {
@@ -8645,7 +8644,7 @@ sub create_nfobjects() {
 	}
     }
 
-    for ( keys %nfobjects ) {
+    for ( sort keys %nfobjects ) {
 	emit( qq(if ! qt \$NFACCT get $_; then),
 	      qq(    \$NFACCT add $_),
 	      qq(fi\n) );
@@ -9121,7 +9120,7 @@ sub initialize_switches() {
     if ( keys %switches ) {
 	emit( 'if [ $COMMAND = start ]; then' );
 	push_indent;
-	for my $switch ( keys %switches ) {
+	for my $switch ( sort keys %switches ) {
 	    my $setting = $switches{$switch};
 	    my $file = "/proc/net/nf_condition/$switch";
 	    emit "[ -f $file ] && echo $setting->{setting} > $file";

Shorewall/Perl/Shorewall/Compiler.pm

@@ -93,10 +93,11 @@ sub generate_script_1( $ ) {
 	    my $date = compiletime;
 
 	    emit "#!$config{SHOREWALL_SHELL}\n#\n# Compiled firewall script generated by Shorewall $globals{VERSION} - $date\n#";
+
+	    copy  $globals{SHAREDIRPL} . '/lib.runtime', 0;
+	    copy2 $globals{SHAREDIRPL} . '/lib.common' , $debug;
 	}
 
-	copy  $globals{SHAREDIRPL} . '/lib.runtime', 0;
-	copy2 $globals{SHAREDIRPL} . '/lib.common' , $debug;
     }
 
     my $lib = find_file 'lib.private';
@@ -944,7 +945,7 @@ sub compiler {
 	#
 	# Copy the footer to the script
 	#
-	copy $globals{SHAREDIRPL} . 'prog.footer';
+	copy $globals{SHAREDIRPL} . 'prog.footer' unless $test;
 
 	disable_script;
 	#

Shorewall/Perl/Shorewall/Config.pm

@@ -86,9 +86,6 @@ our @EXPORT = qw(
 		 kernel_version
 
                  compiletime
-				       
-		 F_IPV4
-		 F_IPV6
                 );
 
 our @EXPORT_OK = qw( $shorewall_dir initialize shorewall);
@@ -199,6 +196,9 @@ our %EXPORT_TAGS = ( internal => [ qw( create_temp_script
 
                                        PARMSMODIFIED
                                        USEDCALLER
+				       
+		                       F_IPV4
+		                       F_IPV6
 
 				       TCP
 				       UDP
@@ -748,7 +748,7 @@ sub initialize( $;$$) {
 		    TC_SCRIPT               => '',
 		    EXPORT                  => 0,
 		    KLUDGEFREE              => '',
-		    VERSION                 => "5.1.4-Beta1",
+		    VERSION                 => "5.0.9-Beta2",
 		    CAPVERSION              => 50100 ,
 		    BLACKLIST_LOG_TAG       => '',
 		    RELATED_LOG_TAG         => '',
@@ -792,7 +792,6 @@ sub initialize( $;$$) {
 	  INVALID_LOG_LEVEL => undef,
 	  UNTRACKED_LOG_LEVEL => undef,
 	  LOG_BACKEND => undef,
-	  LOG_LEVEL => undef,
 	  #
 	  # Location of Files
 	  #
@@ -817,7 +816,6 @@ sub initialize( $;$$) {
 	  ACCEPT_DEFAULT => undef,
 	  QUEUE_DEFAULT => undef,
 	  NFQUEUE_DEFAULT => undef,
-	  BLACKLIST_DEFAULT => undef,
 	  #
 	  # RSH/RCP Commands
 	  #
@@ -906,7 +904,6 @@ sub initialize( $;$$) {
 	  VERBOSE_MESSAGES => undef ,
 	  ZERO_MARKS => undef ,
 	  FIREWALL => undef ,
-	  BALANCE_PROVIDERS => undef ,
 	  #
 	  # Packet Disposition
 	  #
@@ -1092,7 +1089,7 @@ sub initialize( $;$$) {
 
     %compiler_params = ();
 
-    %actparams = ( 0 => 0, loglevel => '', logtag => '', chain => '', disposition => '', caller => '', callfile => '', callline => ''  );
+    %actparams = ( 0 => 0, loglevel => '', logtag => '', chain => '', disposition => '', caller => ''  );
     $parmsmodified = 0;
     $usedcaller    = 0;
     %ipsets = ();
@@ -1218,7 +1215,7 @@ sub compiletime() {
 sub currentlineinfo() {
     my $linenumber = $currentlinenumber || 1;
 
-    if ( $currentfilename ) {
+    if ( $currentfile ) {
 	my $lineinfo = " $currentfilename ";
 	
 	if ( $linenumber eq 'EOF' ) {
@@ -2177,7 +2174,7 @@ sub split_list3( $$ ) {
 	    $element = join ',', $element , $_;
 	}
     }
-
+    
     unless ( $opencount == 0 ) {
 	fatal_error "Invalid $type ($list)";
     }
@@ -2232,7 +2229,7 @@ sub split_list4( $ ) {
 sub split_columns( $ ) {
     my ($list) = @_;
 
-    return split ' ', $list unless $list =~ /[()]/;
+    return split ' ', $list unless $list =~ /\(/;
 
     my @list1 = split ' ', $list;
     my @list2;
@@ -2273,7 +2270,9 @@ sub split_columns( $ ) {
 	}
     }
 
-    fatal_error "Mismatched parentheses ($list)" unless $opencount == 0;
+    unless ( $opencount == 0 ) {
+	fatal_error "Mismatched parentheses ($list)";
+    }
 
     @list2;
 }
@@ -2286,7 +2285,7 @@ sub clear_comment();
 #    ensure that it has an appropriate number of columns.
 #    supply '-' in omitted trailing columns.
 #    Handles all of the supported forms of column/pair specification
-#    Handles segragating raw iptables input in rules
+#    Handles segragating raw iptables input in INLINE rules
 #
 sub split_line2( $$;$$$ ) {
     my ( $description, $columnsref, $nopad, $maxcolumns, $inline ) = @_;
@@ -2435,12 +2434,12 @@ sub split_line2( $$;$$$ ) {
 		}
 	    } else {
 		fatal_error "Unknown column ($1)" unless exists $columnsref->{$column};
+		$column = $columnsref->{$column};
+		fatal_error "Non-ASCII gunk in file" if $columns =~ /[^\s[:print:]]/;
 		$value = $1 if $value =~ /^"([^"]+)"$/;
 		$value =~ s/\\"/"/g;
-		fatal_error "Non-ASCII gunk in the value of the $column column" if $value =~ /[^\s[:print:]]/;
-		my $colnum = $columnsref->{$column};
-		warning_message qq(Replacing "$line[$colnum]" with "$value" in the ) . uc( $column ) . ' column' if $line[$colnum] ne '-';
-		$line[$colnum] = $value;
+		fatal_error "Non-ASCII gunk in the value of the $column column" if $columns =~ /[^\s[:print:]]/;
+		$line[$column] = $value;
 	    }
 	}
     }
@@ -2711,13 +2710,13 @@ sub directive_info( $$$$ ) {
 # Add quotes to the passed value if the passed 'first part' has an odd number of quotes
 # Return an expression that concatenates $first, $val and $rest
 #
-sub join_parts( $$$$ ) {
-    my ( $first, $val, $rest, $just_expand ) = @_;
+sub join_parts( $$$ ) {
+    my ( $first, $val, $rest ) = @_;
 
     $val = '' unless defined $val;
-    $val = "'$val'" unless $just_expand || ( $val =~ /^-?\d+$/               ||    # Value is numeric
-					     ( ( ( $first =~ tr/"/"/ ) & 1 ) ||    # There are an odd number of double quotes preceding the value
-					       ( ( $first =~ tr/'/'/ ) & 1 ) ) );  # There are an odd number of single quotes preceding the value
+    $val = "'$val'" unless ( $val =~ /^-?\d+$/               ||    # Value is numeric
+			     ( ( ( $first =~ tr/"/"/ ) & 1 ) ||    # There are an odd number of double quotes preceding the value
+			       ( ( $first =~ tr/'/'/ ) & 1 ) ) );  # There are an odd number of single quotes preceding the value
     join( '', $first, $val, $rest );
 }
 
@@ -2770,7 +2769,7 @@ sub evaluate_expression( $$$$ ) {
 		     exists $capdesc{$var}   ? have_capability( $var ) : '' );
 	}
 
-	$expression = join_parts( $first, $val, $rest, $just_expand );
+	$expression = join_parts( $first, $val, $rest );
 	directive_error( "Variable Expansion Loop" , $filename, $linenumber ) if ++$count > 100;
     }
 
@@ -2780,8 +2779,8 @@ sub evaluate_expression( $$$$ ) {
 	    my ( $first, $var, $rest ) = ( $1, $3, $4);
 	    $var = numeric_value( $var ) if $var =~ /^\d/;
 	    $val = $var ? $actparams{$var} : $chain;
-	    $usedcaller = USEDCALLER if $var =~ /^(?:caller|callfile|callline)$/;
-	    $expression = join_parts( $first, $val, $rest , $just_expand );
+	    $usedcaller = USEDCALLER if $var eq 'caller';
+	    $expression = join_parts( $first, $val, $rest );
 	    directive_error( "Variable Expansion Loop" , $filename, $linenumber ) if ++$count > 100;
 	}
     }
@@ -2816,6 +2815,7 @@ sub evaluate_expression( $$$$ ) {
 	#
 	# Not a simple one-term expression -- compile it
 	#
+
 	declare_passed unless $evals++;
 
 	$val = eval qq(package Shorewall::User;
@@ -2832,7 +2832,6 @@ sub evaluate_expression( $$$$ ) {
     $val;
 }
 
-sub pop_open();
 #
 # Set callback
 #
@@ -2840,40 +2839,6 @@ sub directive_callback( $ ) {
     $directive_callback = shift;
 }
 
-sub directive_message( \&$$$$ ) {
-    my ( $functptr, $verbose, $expression, $filename, $linenumber ) = @_;
-
-    unless ( $omitting ) {
-	if ( $actparams{0} ) {
-	    #
-	    # When issuing a message from an action, report the action invocation
-	    # site rather than the action file and line number.
-	    #
-	    # Avoid double-reporting by temporarily removing the invocation site
-	    # from the open stack.
-	    #
-	    my $saveopens = pop @openstack;
-
-	    $functptr->( $verbose ,
-			 evaluate_expression( $expression ,
-					      $filename ,
-					      $linenumber ,
-					      1 ),
-			 $actparams{callfile} ,
-			 $actparams{callline} );
-	    push @openstack, $saveopens;
-	} else {
-	    $functptr->( $verbose ,
-			 evaluate_expression( $expression ,
-					      $filename ,
-					      $linenumber ,
-					      1 ),
-			 $filename ,
-			 $linenumber );
-	}
-    }
-}
-
 #
 # Each entry in @ifstack consists of a 4-tupple
 #
@@ -2887,8 +2852,7 @@ sub process_compiler_directive( $$$$ ) {
 
     print "CD===> $line\n" if $debug;
 
-    directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber )
-	unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*|ERROR\s+|WARNING\s+|INFO\s+|WARNING!\s+|INFO!\s+|REQUIRE\s+)(.*)$/i;
+    directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber ) unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*|ERROR\s+|WARNING\s+|INFO\s+|WARNING!\s+|INFO!\s+)(.*)$/i;
 
     my ($keyword, $expression) = ( uc $1, $2 );
 
@@ -2990,16 +2954,15 @@ sub process_compiler_directive( $$$$ ) {
 		      $var = $2 || 'chain';
 		      directive_error( "Shorewall variables may only be RESET in the body of an action", $filename, $linenumber ) unless $actparams{0};
 		      if ( exists $actparams{$var} ) {
-			  if ( $var =~ /^(?:loglevel|logtag|chain|disposition|caller|callfile|callline)$/ ) {
+			  if ( $var =~ /^loglevel|logtag|chain|disposition|caller$/ ) {
 			      $actparams{$var} = '';
 			  } else {
 			      delete $actparams{$var}
 			  }
-
-			  $parmsmodified = PARMSMODIFIED if @ifstack > $ifstack;
 		      } else {
 			  directive_warning( 'Yes', "Shorewall variable $2 does not exist", $filename, $linenumber );
 		      }
+
 		  } else {
 		      if ( exists $variables{$2} ) {
 			  delete $variables{$2};
@@ -3029,87 +2992,52 @@ sub process_compiler_directive( $$$$ ) {
 	  } ,
 
 	  ERROR => sub() {
-	      unless ( $omitting ) {
-		  if ( $actparams{0} ) {
-		      close $currentfile;
-		      #
-		      # Avoid 'missing ?ENDIF' error in pop_open'
-		      #
-		      @ifstack = ();
-		      #
-		      # Avoid double-reporting the action invocation site
-		      #
-		      pop_open;
-
-		      directive_error( evaluate_expression( $expression ,
-							    $filename ,
-							    $linenumber ,
-							    1 ) ,
-				       $actparams{callfile} ,
-				       $actparams{callline} );
-		  } else {
-		      directive_error( evaluate_expression( $expression ,
-							    $filename ,
-							    $linenumber ,
-							    1 ) ,
-				       $filename ,
-				       $linenumber ) unless $omitting;
-		  }
-	      }
+	      directive_error( evaluate_expression( $expression ,
+						    $filename ,
+						    $linenumber ,
+						    1 ) ,
+			       $filename ,
+			       $linenumber ) unless $omitting;
 	  } ,
 
 	  WARNING => sub() {
-	      directive_message( &directive_warning ,
-				 $config{VERBOSE_MESSAGES},
-				 $expression ,
+	      directive_warning( $config{VERBOSE_MESSAGES} ,
+		                 evaluate_expression( $expression ,
+						      $filename ,
+						      $linenumber ,
+						      1 ),
 				 $filename ,
-				 $linenumber );
+				 $linenumber ) unless $omitting;
 	  } ,
 
 	  INFO => sub() {
-	      directive_message( &directive_info,
-				 $config{VERBOSE_MESSAGES} ,
-				 $expression ,
-				 $filename ,
-				 $linenumber );
+	      directive_info( $config{VERBOSE_MESSAGES} ,
+			      evaluate_expression( $expression ,
+						   $filename ,
+						   $linenumber ,
+						   1 ),
+			      $filename ,
+			      $linenumber ) unless $omitting;
 	  } ,
 
 	  'WARNING!' => sub() {
-	      directive_message( &directive_warning ,
-				 ! $config{VERBOSE_MESSAGES} ,
-				 $expression ,
+	      directive_warning( ! $config{VERBOSE_MESSAGES} ,
+		                 evaluate_expression( $expression ,
+						      $filename ,
+						      $linenumber ,
+						      1 ),
 				 $filename ,
-				 $linenumber );
+				 $linenumber ) unless $omitting;
 	  } ,
 
 	  'INFO!' => sub() {
-	      directive_message( &directive_info ,
-				 ! $config{VERBOSE_MESSAGES} ,
-				 $expression ,
-				 $filename ,
-				 $linenumber );
-	  } ,
-
-	  REQUIRE => sub() {
-	      unless ( $omitting ) {
-		  fatal_error "?REQUIRE may only be used within action files" unless $actparams{0};
-		  fatal_error "Unknown capability ($expression)" unless ( my $capdesc = $capdesc{$expression} );
-		  unless ( have_capability( $expression ) ) {
-		      close $currentfile;
-		      #
-		      # Avoid 'missing ?ENDIF' error in pop_open'
-		      #
-		      @ifstack = ();
-		      #
-		      # Avoid double-reporting the action call site
-		      #
-		      pop_open;
-
-		      directive_error( "The $actparams{action} action requires the $capdesc capability",
-				       $actparams{callfile} ,
-				       $actparams{callline} );
-		  }
-	      }
+	      directive_info( ! $config{VERBOSE_MESSAGES} ,
+			      evaluate_expression( $expression ,
+						   $filename ,
+						   $linenumber ,
+						   1 ),
+			      $filename ,
+			      $linenumber ) unless $omitting;
 	  } ,
 
 	);
@@ -3610,8 +3538,6 @@ sub push_action_params( $$$$$$ ) {
     $actparams{loglevel}    = $loglevel;
     $actparams{logtag}      = $logtag;
     $actparams{caller}      = $caller;
-    $actparams{callfile}    = $currentfilename;
-    $actparams{callline}    = $currentlinenumber;
     $actparams{disposition} = '' if $chainref->{action};
     #
     # The Shorewall variable '@chain' has non-word characters other than hyphen removed
@@ -3742,7 +3668,6 @@ sub expand_variables( \$ ) {
 	    $usedcaller = USEDCALLER if $var eq 'caller';
 	} else {
 	    fatal_error "Undefined shell variable (\$$var)" unless $config{IGNOREUNKNOWNVARIABLES} || exists $config{$var};
-	    $val = $config{$var};
 	}
 
 	$val = '' unless defined $val;
@@ -3828,7 +3753,7 @@ sub read_a_line($) {
 	    #
 	    # Handle directives
 	    #
-	    if ( /^\s*\?(?:IF|ELSE|ELSIF|ENDIF|SET|RESET|FORMAT|COMMENT|ERROR|WARNING|INFO|REQUIRE)/i ) {
+	    if ( /^\s*\?(?:IF|ELSE|ELSIF|ENDIF|SET|RESET|FORMAT|COMMENT|ERROR|WARNING|INFO)/i ) {
 		$omitting = process_compiler_directive( $omitting, $_, $currentfilename, $. );
 		next;
 	    }
@@ -5354,24 +5279,11 @@ sub update_config_file( $ ) {
     }
 
     update_default( 'USE_DEFAULT_RT', 'No' );
-
-    if ( $config{USE_DEFAULT_RT} eq '' || $config{USE_DEFAULT_RT} =~ /^no$/i ) {
-	update_default( 'BALANCE_PROVIDERS', 'No' );
-    } else {
-	update_default( 'BALANCE_PROVIDERS', 'Yes' );
-    }
-
-    update_default( 'EXPORTMODULES',     'No' );
-    update_default( 'RESTART',           'reload' );
-    update_default( 'PAGER',             $shorewallrc1{DEFAULT_PAGER} );
-    update_default( 'LOGFORMAT',         'Shorewall:%s:%s:' );
-    update_default( 'LOGLIMIT',          '' );
-
-    if ( $family == F_IPV4 ) {
-	update_default( 'BLACKLIST_DEFAULT', 'dropBcasts,dropNotSyn,dropInvalid' );
-    } else {
-	update_default( 'BLACKLIST_DEFAULT', 'AllowICMPs,dropBcasts,dropNotSyn,dropInvalid' );
-    }	
+    update_default( 'EXPORTMODULES',  'No' );
+    update_default( 'RESTART',        'reload' );
+    update_default( 'PAGER',          $shorewallrc1{DEFAULT_PAGER} );
+    update_default( 'LOGFORMAT',      'Shorewall:%s:%s:' );
+    update_default( 'LOGLIMIT',       '' );
 
     my $fn;
 
@@ -5422,12 +5334,8 @@ sub update_config_file( $ ) {
 		    }
 
 		}
-		if ( supplied $val ) {
-		    #
-		    # Log LEVEL and DEFAULT settings often contain parens
-		    #
-		    $val = ($var =~ /(?:LEVEL|DEFAULT)$/) ? qq("$val") : conditional_quote $val;
-		}
+
+		$val = conditional_quote $val;
 
 		$_ = "$var=$val\n";
 	    }
@@ -5490,7 +5398,6 @@ EOF
 sub process_shorewall_conf( $$ ) {
     my ( $update, $annotate ) = @_;
     my $file   = find_file "$product.conf";
-    my @vars;
 
     if ( -f $file ) {
 	$globals{CONFIGDIR} =  $configfile = $file;
@@ -5504,7 +5411,7 @@ sub process_shorewall_conf( $$ ) {
 	    # Don't expand shell variables or allow embedded scripting
 	    #
 	    while ( read_a_line( STRIP_COMMENTS | SUPPRESS_WHITESPACE  | CHECK_GUNK ) ) {
-		if ( $currentline =~ /^\s*([a-zA-Z]\w*)=(.*)$/ ) {
+		if ( $currentline =~ /^\s*([a-zA-Z]\w*)=(.*?)\s*$/ ) {
 		    my ($var, $val) = ($1, $2);
 
 		    if ( exists $config{$var} ) {
@@ -5523,12 +5430,6 @@ sub process_shorewall_conf( $$ ) {
 			next;
 		    }
 
-		    if ( $update ) {
-			push @vars, $var;
-		    } else {
-			expand_variables( $val ) unless $val =~ /^'.*'$/;
-		    }
-
 		    $config{$var} = ( $val =~ /\"([^\"]*)\"$/ ? $1 : $val );
 
 		    warning_message "Option $var=$val is deprecated"
@@ -5549,19 +5450,14 @@ sub process_shorewall_conf( $$ ) {
     #
     # Now update the config file if asked
     #
-    if ( $update ) {
-	update_config_file( $annotate ); 
-	#
-	# Config file update requires that the option values not have
-	# Shell variables expanded. We do that now.
-	#
-	# To handle options like LOG_LEVEL, we process the options
-	# in the order in which they appear in the .conf file.
-	#
-	for ( @vars ) {
-	    if ( supplied( my $val = $config{$_} ) ) {
-		expand_variables( $config{$_} ) unless $val =~ /^'.*'$/;
-	    }
+    update_config_file( $annotate ) if $update;
+    #
+    # Config file update requires that the option values not have
+    # Shell variables expanded. We do that now.
+    #
+    for ( values  %config ) {
+	if ( supplied $_ ) {
+	    expand_variables( $_ ) unless /^'(.+)'$/;
 	}
     }
 }
@@ -6390,7 +6286,6 @@ sub get_configuration( $$$$ ) {
     default_yes_no 'RESTORE_DEFAULT_ROUTE'      , 'Yes';
     default_yes_no 'AUTOMAKE'                   , '';
     default_yes_no 'TRACK_PROVIDERS'            , '';
-    default_yes_no 'BALANCE_PROVIDERS'          , $config{USE_DEFAULT_RT} ? 'Yes' : '';
 
     unless ( ( $config{NULL_ROUTE_RFC1918} || '' ) =~ /^(?:blackhole|unreachable|prohibit)$/ ) {
 	default_yes_no( 'NULL_ROUTE_RFC1918', '' );
@@ -6407,8 +6302,6 @@ sub get_configuration( $$$$ ) {
 	$config{ACCOUNTING_TABLE} = 'filter';
     }
 
-    my %variables = ( SW_DBL_IPSET => '', SW_DBL_TIMEOUT => 0 );
-
     if ( supplied( $val = $config{DYNAMIC_BLACKLIST} ) ) {
 	if ( $val =~ /^ipset/ ) {
 	    my %simple_options = ( 'src-dst' => 1, 'disconnect' => 1 );
@@ -6449,9 +6342,6 @@ sub get_configuration( $$$$ ) {
 
 	    require_capability( 'IPSET_V5', 'DYNAMIC_BLACKLIST=ipset...', 's' );
 
-	    $variables{SW_DBL_IPSET}   = $set;
-	    $variables{SW_DBL_TIMEOUT} = $globals{DBL_TIMEOUT};
-
 	} else {
 	    default_yes_no( 'DYNAMIC_BLACKLIST', 'Yes' );
 	}
@@ -6459,8 +6349,6 @@ sub get_configuration( $$$$ ) {
 	default_yes_no( 'DYNAMIC_BLACKLIST', 'Yes' );
     }
 
-    add_variables( %variables );
-
     default_yes_no 'REQUIRE_INTERFACE'          , '';
     default_yes_no 'FORWARD_CLEAR_MARK'         , have_capability( 'MARK' ) ? 'Yes' : '';
     default_yes_no 'COMPLETE'                   , '';
@@ -6558,12 +6446,6 @@ sub get_configuration( $$$$ ) {
     default_log_level 'INVALID_LOG_LEVEL',    '';
     default_log_level 'UNTRACKED_LOG_LEVEL',  '';
 
-    if ( supplied( $val = $config{LOG_LEVEL} ) ) {
-	validate_level( $val );
-    } else {
-	$config{LOG_LEVEL} = 'info';
-    }
-
     if ( supplied( $val = $config{LOG_BACKEND} ) ) {
 	if ( $family == F_IPV4 && $val eq 'ULOG' ) {
 	    $val = 'ipt_ULOG';
@@ -6732,16 +6614,13 @@ sub get_configuration( $$$$ ) {
     }
 
     default 'RESTOREFILE'           , 'restore';
-
-    default 'DROP_DEFAULT'          , 'none';
-
-    default 'REJECT_DEFAULT'        , 'none';
-    default 'BLACKLIST_DEFAULT'     , 'none';
+    default 'DROP_DEFAULT'          , 'Drop';
+    default 'REJECT_DEFAULT'        , 'Reject';
     default 'QUEUE_DEFAULT'         , 'none';
     default 'NFQUEUE_DEFAULT'       , 'none';
     default 'ACCEPT_DEFAULT'        , 'none';
 
-    for my $default ( qw/DROP_DEFAULT REJECT_DEFAULT BLACKLIST_DEFAULT QUEUE_DEFAULT NFQUEUE_DEFAULT ACCEPT_DEFAULT/ ) {
+    for my $default ( qw/DROP_DEFAULT REJECT_DEFAULT QUEUE_DEFAULT NFQUEUE_DEFAULT ACCEPT_DEFAULT/ ) {
 	$config{$default} = 'none' if "\L$config{$default}" eq 'none';
     }
 

Shorewall/Perl/Shorewall/IPAddrs.pm

@@ -389,8 +389,6 @@ sub resolve_proto( $ ) {
     my $proto = $_[0];
     my $number;
 
-    $proto =~ s/:.*//;
-
     if ( $proto =~ /^\d+$/ || $proto =~ /^0x/ ) {
 	$number = numeric_value ( $proto );
 	defined $number && $number <= 255 ? $number : undef;

Shorewall/Perl/Shorewall/Misc.pm

@@ -127,7 +127,7 @@ sub setup_ecn()
 	}
 
 	if ( @hosts ) {
-	    my @interfaces = ( keys %interfaces );
+	    my @interfaces = ( sort { interface_number($a) <=> interface_number($b) } keys %interfaces );
 
 	    progress_message "$doing ECN control on @interfaces...";
 
@@ -1213,53 +1213,55 @@ sub add_common_rules ( $ ) {
 	}
     }
 
-    my $announced = 0;
+    if ( $family == F_IPV4 ) {
+	my $announced = 0;
 
-    $list = find_interfaces_by_option 'upnp';
+	$list = find_interfaces_by_option 'upnp';
 
-    if ( @$list ) {
-	progress_message2 "$doing UPnP";
+	if ( @$list ) {
+	    progress_message2 "$doing UPnP";
 
-	$chainref = set_optflags( new_nat_chain( 'UPnP' ), DONT_OPTIMIZE );
+	    $chainref = set_optflags( new_nat_chain( 'UPnP' ), DONT_OPTIMIZE );
 
-	add_commands( $chainref, '[ -s /${VARDIR}/.UPnP ] && cat ${VARDIR}/.UPnP >&3' );
+	    add_commands( $chainref, '[ -s /${VARDIR}/.UPnP ] && cat ${VARDIR}/.UPnP >&3' );
 
-	my $chainref1;
+	    my $chainref1;
 
-	if ( $config{MINIUPNPD} ) {
-	    $chainref1 = set_optflags( new_nat_chain( 'MINIUPNPD-POSTROUTING' ), DONT_OPTIMIZE ); 
-	    add_commands( $chainref, '[ -s /${VARDIR}/.MINIUPNPD-POSTROUTING ] && cat ${VARDIR}/.MINIUPNPD-POSTROUTING >&3' );
+	    if ( $config{MINIUPNPD} ) {
+		$chainref1 = set_optflags( new_nat_chain( 'MINIUPNPD-POSTROUTING' ), DONT_OPTIMIZE ); 
+		add_commands( $chainref, '[ -s /${VARDIR}/.MINIUPNPD-POSTROUTING ] && cat ${VARDIR}/.MINIUPNPD-POSTROUTING >&3' );
+	    }
+
+	    $announced = 1;
+
+	    for $interface ( @$list ) {
+		add_ijump_extended $nat_table->{PREROUTING} ,            j => 'UPnP',                   get_interface_origin($interface), imatch_source_dev ( $interface );
+		add_ijump_extended $nat_table->{$globals{POSTROUTING}} , j => 'MINIUPNPD-POSTROUTING' , $origin{MINIUPNPD}              , imatch_dest_dev   ( $interface ) if $chainref1;
+	    }
 	}
 
-	$announced = 1;
+	$list = find_interfaces_by_option 'upnpclient';
 
-	for $interface ( @$list ) {
-	    add_ijump_extended $nat_table->{PREROUTING} ,            j => 'UPnP',                   get_interface_origin($interface), imatch_source_dev ( $interface );
-	    add_ijump_extended $nat_table->{$globals{POSTROUTING}} , j => 'MINIUPNPD-POSTROUTING' , $origin{MINIUPNPD}              , imatch_dest_dev   ( $interface ) if $chainref1;
-	}
-    }
+	if ( @$list ) {
+	    progress_message2 "$doing UPnP" unless $announced;
 
-    $list = find_interfaces_by_option 'upnpclient';
+	    for $interface ( @$list ) {
+		my $chainref = $filter_table->{input_option_chain $interface};
+		my $base     = uc var_base get_physical $interface;
+		my $optional = interface_is_optional( $interface );
+		my $variable = get_interface_gateway( $interface, ! $optional );
+		my $origin   = get_interface_origin( $interface );
 
-    if ( @$list ) {
-	progress_message2 "$doing UPnP" unless $announced;
-
-	for $interface ( @$list ) {
-	    my $chainref = $filter_table->{input_option_chain $interface};
-	    my $base     = uc var_base get_physical $interface;
-	    my $optional = interface_is_optional( $interface );
-	    my $variable = get_interface_gateway( $interface, ! $optional );
-	    my $origin   = get_interface_origin( $interface );
-
-	    if ( $optional ) {
-		add_commands( $chainref,
-			      qq(if [ -n "SW_\$${base}_IS_USABLE" -a -n "$variable" ]; then) );
-		incr_cmd_level( $chainref );
-		add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
-		decr_cmd_level( $chainref );
-		add_commands( $chainref, 'fi' );
-	    } else {
-		add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
+		if ( $optional ) {
+		    add_commands( $chainref,
+				  qq(if [ -n "SW_\$${base}_IS_USABLE" -a -n "$variable" ]; then) );
+		    incr_cmd_level( $chainref );
+		    add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
+		    decr_cmd_level( $chainref );
+		    add_commands( $chainref, 'fi' );
+		} else {
+		    add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
+		}
 	    }
 	}
     }
@@ -1295,7 +1297,7 @@ sub setup_mac_lists( $ ) {
 	$maclist_interfaces{ $hostref->[0] } = 1;
     }
 
-    my @maclist_interfaces = ( keys %maclist_interfaces );
+    my @maclist_interfaces = ( sort keys %maclist_interfaces );
 
     if ( $phase == 1 ) {
 
@@ -1616,7 +1618,7 @@ sub handle_loopback_traffic() {
 	    # Handle conntrack rules
 	    #
 	    if ( $notrackref->{referenced} ) {
-		for my $hostref ( @{defined_zone( $z1 )->{hosts}{ip}{'%vserver%'}} ) {
+		for my $hostref ( sort { $a->{type} cmp $b->{type} } @{defined_zone( $z1 )->{hosts}{ip}{'%vserver%'}} ) {
 		    my $exclusion   = source_exclusion( $hostref->{exclusions}, $notrackref);
 		    my @ipsec_match = match_ipsec_in $z1 , $hostref;
 
@@ -1637,8 +1639,8 @@ sub handle_loopback_traffic() {
 	    #
 	    my $source_hosts_ref = defined_zone( $z1 )->{hosts};
 
-	    for my $typeref ( values %{$source_hosts_ref} ) {
-		for my $hostref ( @{$typeref->{'%vserver%'}} ) {
+	    for my $typeref ( sort { $a->{type} cmp $b->{type} } values %{$source_hosts_ref} ) {
+		for my $hostref ( sort { $a->{type} cmp $b->{type} } @{$typeref->{'%vserver%'}} ) {
 		    my $exclusion   = source_exclusion( $hostref->{exclusions}, $natref);
 
 		    for my $net ( @{$hostref->{hosts}} ) {
@@ -1660,7 +1662,7 @@ sub add_interface_jumps {
     our %input_jump_added;
     our %output_jump_added;
     our %forward_jump_added;
-    my @interfaces = grep $_ ne '%vserver%', @_;
+    my @interfaces = sort grep $_ ne '%vserver%', @_;
     my $dummy;
     my $lo_jump_added = interface_zone( loopback_interface ) && ! get_interface_option( loopback_interface, 'destonly' );
     #
@@ -1774,7 +1776,7 @@ sub handle_complex_zone( $$ ) {
 	my $type       = $zoneref->{type};
 	my $source_ref = ( $zoneref->{hosts}{ipsec} ) || {};
 
-	for my $interface ( keys %$source_ref ) {
+	for my $interface ( sort { interface_number( $a ) <=> interface_number( $b ) } keys %$source_ref ) {
 	    my $sourcechainref = $filter_table->{forward_chain $interface};
 	    my @interfacematch;
 	    my $interfaceref = find_interface $interface;
@@ -2286,9 +2288,9 @@ sub generate_matrix() {
 	#
 	# Take care of PREROUTING, INPUT and OUTPUT jumps
 	#
-	for my $type ( keys %$source_hosts_ref ) {
+	for my $type ( sort keys %$source_hosts_ref ) {
 	    my $typeref = $source_hosts_ref->{$type};
-	    for my $interface ( keys %$typeref ) {
+	    for my $interface ( sort { interface_number( $a ) <=> interface_number( $b ) } keys %$typeref ) {
 		if ( get_physical( $interface ) eq '+' ) {
 		    #
 		    # Insert the interface-specific jumps before this one which is not interface-specific
@@ -2373,9 +2375,9 @@ sub generate_matrix() {
 
 		my $chainref = $filter_table->{$chain}; #Will be null if $chain is a Netfilter Built-in target like ACCEPT
 
-		for my $type ( keys %{$zone1ref->{hosts}} ) {
+		for my $type ( sort keys %{$zone1ref->{hosts}} ) {
 		    my $typeref = $zone1ref->{hosts}{$type};
-		    for my $interface ( keys %$typeref ) {
+		    for my $interface ( sort { interface_number( $a ) <=> interface_number( $b ) } keys %$typeref ) {
 			for my $hostref ( @{$typeref->{$interface}} ) {
 			    next if $hostref->{options}{sourceonly};
 			    if ( $zone ne $zone1 || $num_ifaces > 1 || $hostref->{options}{routeback} ) {

Shorewall/Perl/Shorewall/Providers.pm

@@ -519,11 +519,11 @@ sub process_a_provider( $ ) {
     my ( $loose, $track, $balance, $default, $default_balance, $optional, $mtu, $tproxy, $local, $load, $what, $hostroute, $persistent );
 
     if ( $pseudo ) {	
-	( $loose, $track,                   $balance , $default, $default_balance,                   $optional,                           $mtu, $tproxy , $local, $load, $what ,      $hostroute,        $persistent ) =
-	( 0,      0                       , 0 ,        0,        0,                                  1                                  , ''  , 0       , 0,      0,     'interface', 0,                 0);
+	( $loose, $track,                   $balance , $default, $default_balance,                $optional,                           $mtu, $tproxy , $local, $load, $what ,      $hostroute,        $persistent ) =
+	( 0,      0                       , 0 ,        0,        0,                               1                                  , ''  , 0       , 0,      0,     'interface', 0,                 0);
     } else {
-	( $loose, $track,                   $balance , $default, $default_balance,                   $optional,                           $mtu, $tproxy , $local, $load, $what      , $hostroute,        $persistent  )=
-	( 0,      $config{TRACK_PROVIDERS}, 0 ,        0,        $config{BALANCE_PROVIDERS} ? 1 : 0, interface_is_optional( $interface ), ''  , 0       , 0,      0,     'provider',  1,                 0);
+	( $loose, $track,                   $balance , $default, $default_balance,                $optional,                           $mtu, $tproxy , $local, $load, $what      , $hostroute,        $persistent  )=
+	( 0,      $config{TRACK_PROVIDERS}, 0 ,        0,        $config{USE_DEFAULT_RT} ? 1 : 0, interface_is_optional( $interface ), ''  , 0       , 0,      0,     'provider',  1,                 0);
     }
 
     unless ( $options eq '-' ) {
@@ -603,37 +603,19 @@ sub process_a_provider( $ ) {
 
     fatal_error "A provider interface must have at least one associated zone" unless $tproxy || %{interface_zones($interface)};
 
-    unless ( $pseudo ) {
-	if ( $local ) {
-	    fatal_error "GATEWAY not valid with 'local' provider"  unless $gatewaycase eq 'omitted';
-	    fatal_error "'track' not valid with 'local'"           if $track;
-	    fatal_error "DUPLICATE not valid with 'local'"         if $duplicate ne '-';
-	    fatal_error "'persistent' is not valid with 'local"    if $persistent;
-	} elsif ( $tproxy ) {
-	    fatal_error "Only one 'tproxy' provider is allowed"    if $tproxies++;
-	    fatal_error "GATEWAY not valid with 'tproxy' provider" unless $gatewaycase eq 'omitted';
-	    fatal_error "'track' not valid with 'tproxy'"          if $track;
-	    fatal_error "DUPLICATE not valid with 'tproxy'"        if $duplicate ne '-';
-	    fatal_error "MARK not allowed with 'tproxy'"           if $mark ne '-';
-	    fatal_error "'persistent' is not valid with 'tproxy"   if $persistent;
-	    $mark = $globals{TPROXY_MARK};
-	} elsif ( ( my $rf = ( $config{ROUTE_FILTER} eq 'on' ) ) || $interfaceref->{options}{routefilter} ) {
-	    if ( $config{USE_DEFAULT_RT} ) {
-		if ( $rf ) {
-		    fatal_error "There may be no providers when ROUTE_FILTER=Yes and USE_DEFAULT_RT=Yes";
-		} else {
-		    fatal_error "Providers interfaces may not specify 'routefilter' when USE_DEFAULT_RT=Yes";
-		}
-	    } else {
-		unless ( $balance ) {
-		    if ( $rf ) {
-			fatal_error "The 'balance' option is required when ROUTE_FILTER=Yes";
-		    } else {
-			fatal_error "Provider interfaces may not specify 'routefilter' without 'balance' or 'primary'";
-		    }
-		}
-	    }
-	}
+    if ( $local ) {
+	fatal_error "GATEWAY not valid with 'local' provider"  unless $gatewaycase eq 'omitted';
+	fatal_error "'track' not valid with 'local'"           if $track;
+	fatal_error "DUPLICATE not valid with 'local'"         if $duplicate ne '-';
+	fatal_error "'persistent' is not valid with 'local"    if $persistent;
+    } elsif ( $tproxy ) {
+	fatal_error "Only one 'tproxy' provider is allowed"    if $tproxies++;
+	fatal_error "GATEWAY not valid with 'tproxy' provider" unless $gatewaycase eq 'omitted';
+	fatal_error "'track' not valid with 'tproxy'"          if $track;
+	fatal_error "DUPLICATE not valid with 'tproxy'"        if $duplicate ne '-';
+	fatal_error "MARK not allowed with 'tproxy'"           if $mark ne '-';
+	fatal_error "'persistent' is not valid with 'tproxy"   if $persistent;
+	$mark = $globals{TPROXY_MARK};
     }
 
     my $val = 0;
@@ -1799,7 +1781,7 @@ sub map_provider_to_interface() {
 
     my $haveoptional;
 
-    for my $providerref ( values %providers ) {
+    for my $providerref ( sort { $a->{number} cmp $b->{number} } values %providers ) {
 	if ( $providerref->{optional} ) {
 	    unless ( $haveoptional++ ) {
 		emit( 'if [ -n "$interface" ]; then',
@@ -1963,7 +1945,7 @@ sub compile_updown() {
     }
 
     my @nonshared = ( grep $providers{$_}->{optional},
-		      values %provider_interfaces );
+		      sort( { $providers{$a}->{number} <=> $providers{$b}->{number} } values %provider_interfaces ) );
 
     if ( @nonshared ) {
 	my $interfaces = join( '|', map $providers{$_}->{physical}, @nonshared );
@@ -2158,7 +2140,7 @@ sub handle_optional_interfaces( $ ) {
     # names but they might derive from wildcard interface entries. Optional interfaces which do not have
     # wildcard physical names are also included in the providers table.
     #
-    for my $providerref ( grep $_->{optional} , values %providers ) {
+    for my $providerref ( grep $_->{optional} , sort { $a->{number} <=> $b->{number} } values %providers ) {
 	push @interfaces, $providerref->{interface};
 	$wildcards ||= $providerref->{wildcard};
     }

Shorewall/Perl/Shorewall/Proxyarp.pm

@@ -154,7 +154,7 @@ sub setup_proxy_arp() {
 
 	emit '';
 
-	for my $interface ( keys %reset ) {
+	for my $interface ( sort keys %reset ) {
 	    unless ( $set{interface} ) {
 		my $physical = get_physical $interface;
 		emit  ( "if [ -f /proc/sys/net/ipv$family/conf/$physical/$proc_file ]; then" ,
@@ -163,7 +163,7 @@ sub setup_proxy_arp() {
 	    }
 	}
 
-	for my $interface ( keys %set ) {
+	for my $interface ( sort keys %set ) {
 	    my $physical = get_physical $interface;
 	    emit  ( "if [ -f /proc/sys/net/ipv$family/conf/$physical/$proc_file ]; then" ,
 		    "    echo 1 > /proc/sys/net/ipv$family/conf/$physical/$proc_file" );

Shorewall/Perl/Shorewall/Rules.pm

@@ -138,12 +138,14 @@ our %section_rmap = ( ALL_SECTION ,        'ALL',
 
 our @policy_chains;
 
-our %policy_actions;
+our %default_actions;
 
 our %macros;
 
 our $family;
 
+our @builtins;
+
 #
 # Commands that can be embedded in a basic rule and how many total tokens on the line (0 => unlimited).
 #
@@ -231,7 +233,6 @@ use constant { INLINE_OPT           => 1 ,
 	       TERMINATING_OPT      => 256 ,
 	       AUDIT_OPT            => 512 ,
 	       LOGJUMP_OPT          => 1024 ,
-	       SECTION_OPT          => 2048 ,
 };
 
 our %options = ( inline      => INLINE_OPT ,
@@ -245,7 +246,6 @@ our %options = ( inline      => INLINE_OPT ,
 		 terminating => TERMINATING_OPT ,
 		 audit       => AUDIT_OPT ,
 		 logjump     => LOGJUMP_OPT ,
-		 section     => SECTION_OPT ,
     );
 
 our %reject_options;
@@ -309,14 +309,11 @@ sub initialize( $ ) {
     # This is updated from the *_DEFAULT settings in shorewall.conf. Those settings were stored
     # in the %config hash when shorewall[6].conf was processed.
     #
-    %policy_actions  = ( DROP	    => [] ,
-			 REJECT    => [] ,
-			 BLACKLIST => [] ,
-			 ACCEPT    => [] ,
-			 QUEUE	   => [] ,
-			 NFQUEUE   => [] ,
-			 CONTINUE  => [] ,
-			 NONE      => [] ,
+    %default_actions  = ( DROP     => 'none' ,
+		 	  REJECT   => 'none' ,
+			  ACCEPT   => 'none' ,
+			  QUEUE    => 'none' ,
+			  NFQUEUE  => 'none' ,
 			);
     #
     # These are set to 1 as sections are encountered.
@@ -350,7 +347,7 @@ sub initialize( $ ) {
     #
     $macro_nest_level  = 0;
     #
-    # All actions mentioned in /etc/shorewall[6]/actions and /usr/share/shorewall[6]/actions.std
+    # All builtin actions plus those mentioned in /etc/shorewall[6]/actions and /usr/share/shorewall[6]/actions.std
     #
     %actions           = ();
     #
@@ -361,6 +358,7 @@ sub initialize( $ ) {
     @columns           = ( ( '-' ) x LAST_COLUMN, 0 );
 
     if ( $family == F_IPV4 ) {
+	@builtins = qw/dropBcast allowBcast dropNotSyn rejNotSyn allowinUPnP forwardUPnP Limit/;
 	%reject_options = ( 'icmp-net-unreachable'   => 1,
 			    'icmp-host-unreachable'  => 1,
 			    'icmp-port-unreachable'  => 1,
@@ -369,10 +367,10 @@ sub initialize( $ ) {
 			    'icmp-host-prohibited'   => 1,
 			    'icmp-admin-prohibited'  => 1,
 			    'icmp-tcp-reset'         => 2,
-			    'tcp-reset'              => 2,
 	                  );
 			    
     } else {
+	@builtins = qw/dropBcast allowBcast dropNotSyn rejNotSyn/;
 	%reject_options = ( 'icmp6-no-route'         => 1,
 			    'no-route'               => 1,
 			    'icmp6-adm-prohibited'   => 1,
@@ -429,7 +427,6 @@ sub convert_to_policy_chain($$$$$$)
     $chainref->{audit}       = $audit;
     $chainref->{policychain} = $chainref->{name};
     $chainref->{policypair}  = [ $source, $dest ];
-    $chainref->{pactions}    = [];
 }
 
 #
@@ -479,7 +476,7 @@ sub set_policy_chain($$$$$$)
 		$chainref->{synchain}    = $polchainref->{synchain};
 	    }
 
-	    $chainref->{pactions}    = $polchainref->{pactions} || [];
+	    $chainref->{default}     = $polchainref->{default} if defined $polchainref->{default};
 	    $chainref->{is_policy}   = 1;
 	    push @policy_chains, $chainref;
 	} else {
@@ -528,12 +525,12 @@ sub normalize_action( $$$ );
 sub normalize_action_name( $ );
 sub normalize_single_action( $ );
 
-sub process_policy_action( $$$$ ) {
-    my ( $originalpolicy, $policy, $paction, $level ) = @_;
+sub process_default_action( $$$$ ) {
+    my ( $originalpolicy, $policy, $default, $level ) = @_;
 
-    if ( supplied $paction ) {
-	my $paction_option = ( $policy =~ /_DEFAULT$/ );
-	my ( $act, $param ) = get_target_param( $paction );
+    if ( supplied $default ) {
+	my $default_option = ( $policy =~ /_DEFAULT$/ );
+	my ( $def, $param ) = get_target_param( $default );
 
 	if ( supplied $level ) {
 	    validate_level( $level );
@@ -541,49 +538,35 @@ sub process_policy_action( $$$$ ) {
 	    $level = 'none';
 	}
 
-	if ( ( $targets{$act} || 0 ) & ACTION ) {
-	    $paction = supplied $param  ? normalize_action( $act, $level, $param  ) :
-		       $level eq 'none' ? normalize_action_name $act :
-		       normalize_action( $act, $level, '' );
-	} elsif ( ( $targets{$act} || 0 ) == INLINE ) {
-	    $paction = $act;
-	    $paction = "$act($param)" if supplied $param;
-	    $paction = join( ':', $paction, $level ) if $level ne 'none';
-	} elsif ( $paction_option ) {
-	    fatal_error "Unknown Action ($paction) in $policy setting";
-	} else {
-	    fatal_error "Unknown Policy Action ($paction)";
-	}
-
-    } else {
-	$paction = $policy_actions{$policy};
-    }
-
-    $paction;
-}
-
-sub process_policy_actions( $$$ ) {
-    my ( $originalpolicy, $policy, $pactions ) = @_;
-
-    if ( supplied $pactions ) {
-	my @pactions;
-
-	if ( lc $pactions ne 'none' ) {
-	    @pactions = @{$policy_actions{$policy}} if $pactions =~ s/^\+//;
-
-	    for my $paction ( split_list3( $pactions, 'Policy Action' ) ) {
-		my ( $action, $level, $remainder ) = split( /:/, $paction, 3 );
-
-		fatal_error "Invalid policy action ($paction:$level:$remainder)" if defined $remainder;
-
-		push @pactions, process_policy_action( $originalpolicy, $policy, $action, $level );
+	if ( "\L$default" eq 'none' ) {
+	    if ( supplied $param || ( supplied $level && $level ne 'none' ) ) {
+		if ( $default_option ) {
+		    fatal_error "Invalid setting ($originalpolicy) for $policy";
+		} else {
+		    fatal_error "Invalid policy ($originalpolicy)";
+		}
 	    }
+
+	    $default = 'none';
+	} elsif ( ( $targets{$def} || 0 ) == ACTION ) {
+	    $default = supplied $param  ? normalize_action( $def, $level, $param  ) :
+		       $level eq 'none' ? normalize_action_name $def :
+		       normalize_action( $def, $level, '' );
+	} elsif ( ( $targets{$def} || 0 ) == INLINE ) {
+	    $default = $def;
+	    $default = "$def($param)" if supplied $param;
+	    $default = join( ':', $default, $level ) if $level ne 'none';
+	} elsif ( $default_option ) {
+	    fatal_error "Unknown Action ($default) in $policy setting";
+	} else {
+	    fatal_error "Unknown Default Action ($default)";
 	}
 
-	\@pactions;
     } else {
-	$policy_actions{$policy};
+	$default = $default_actions{$policy} || 'none';
     }
+
+    $default;
 }
 
 #
@@ -671,10 +654,12 @@ sub process_a_policy1($$$$$$$) {
 
     require_capability 'AUDIT_TARGET', ":audit", "s" if $audit;
 
-    my ( $policy, $pactions ) = split( /:/, $originalpolicy, 2 );
+    my ( $policy, $default, $level, undef, $remainder ) = split( /:/, $originalpolicy, ACTION_TUPLE_ELEMENTS );
 
     fatal_error "Invalid or missing POLICY ($originalpolicy)" unless $policy;
 
+    fatal_error "Invalid default action ($default:$level:$remainder)" if defined $remainder;
+
     ( $policy , my $queue ) = get_target_param $policy;
 
     fatal_error "Invalid policy ($policy)" unless exists $validpolicies{$policy};
@@ -683,7 +668,7 @@ sub process_a_policy1($$$$$$$) {
 	fatal_error "A $policy policy may not be audited" unless $auditpolicies{$policy};
     }
 
-    my $pactionref = process_policy_actions( $originalpolicy, $policy, $pactions );
+    $default = process_default_action( $originalpolicy, $policy, $default, $level );
 
     if ( defined $queue ) {
 	$policy = handle_nfqueue( $queue,
@@ -694,8 +679,6 @@ sub process_a_policy1($$$$$$$) {
 	    if $clientwild || $serverwild;
 	fatal_error "NONE policy not allowed to/from firewall zone"
 	    if ( zone_type( $client ) == FIREWALL ) || ( zone_type( $server ) == FIREWALL );
-    } elsif ( $policy eq 'BLACKLIST' ) {
-	fatal_error 'BLACKLIST policies require ipset-based dynamic blacklisting' unless $config{DYNAMIC_BLACKLIST} =~ /^ipset/;
     }
 
     unless ( $clientwild || $serverwild ) {
@@ -740,28 +723,32 @@ sub process_a_policy1($$$$$$$) {
 	$chainref->{synchain}  = $chain
     }
 
-    $chainref->{pactions} = $pactionref;
-    $chainref->{origin}   = shortlineinfo('');
+    assert( $default );
+    my $chainref1 = $usedactions{$default};
+    $chainref->{default} = $chainref1 ? $chainref1->{name} : $default;
+
+    $chainref->{origin} = shortlineinfo('');
 
     if ( $clientwild ) {
 	if ( $serverwild ) {
 	    for my $zone ( @zonelist ) {
 		for my $zone1 ( @zonelist ) {
-		    set_policy_chain rules_chain( ${zone}, ${zone1} ), $zone, $zone1, $chainref, $policy, $intrazone;
+		    set_policy_chain rules_chain( ${zone}, ${zone1} ), $client, $server, $chainref, $policy, $intrazone;
 		    print_policy $zone, $zone1, $originalpolicy, $chain;
 		}
 	    }
 	} else {
 	    for my $zone ( all_zones ) {
-		set_policy_chain rules_chain( ${zone}, ${server} ), $zone, $server, $chainref, $policy, $intrazone;
+		set_policy_chain rules_chain( ${zone}, ${server} ), $client, $server, $chainref, $policy, $intrazone;
 		print_policy $zone, $server, $originalpolicy, $chain;
 	    }
 	}
     } elsif ( $serverwild ) {
 	for my $zone ( @zonelist ) {
-	    set_policy_chain rules_chain( ${client}, ${zone} ), $client, $zone, $chainref, $policy, $intrazone;
+	    set_policy_chain rules_chain( ${client}, ${zone} ), $client, $server, $chainref, $policy, $intrazone;
 	    print_policy $client, $zone, $originalpolicy, $chain;
 	}
+
     } else {
 	print_policy $client, $server, $originalpolicy, $chain;
     }
@@ -773,11 +760,7 @@ sub process_a_policy() {
     our @zonelist;
 
     my ( $clients, $servers, $policy, $loglevel, $synparams, $connlimit ) =
-	split_line2( 'policy file',
-		     { source => 0, dest => 1, policy => 2, loglevel => 3, limit => 4, rate => 4, connlimit => 5 } ,
-		     {} , # nopad
-		     6  , # maxcolumns
-		    );
+	split_line 'policy file', { source => 0, dest => 1, policy => 2, loglevel => 3, limit => 4, connlimit => 5 } ;
 
     $loglevel  = '' if $loglevel  eq '-';
     $synparams = '' if $synparams eq '-';
@@ -834,35 +817,33 @@ sub process_policies()
     our %validpolicies = (
 			  ACCEPT => undef,
 			  REJECT => undef,
-			  DROP	 => undef,
+			  DROP   => undef,
 			  CONTINUE => undef,
-			  BLACKLIST => undef,
 			  QUEUE => undef,
 			  NFQUEUE => undef,
 			  NONE => undef
 			  );
 
-    our %map = ( DROP_DEFAULT      => 'DROP' ,
-		 REJECT_DEFAULT    => 'REJECT' ,
-		 BLACKLIST_DEFAULT => 'BLACKLIST' ,
-		 ACCEPT_DEFAULT    => 'ACCEPT' ,
-		 QUEUE_DEFAULT     => 'QUEUE' ,
-		 NFQUEUE_DEFAULT   => 'NFQUEUE' );
+    our %map = ( DROP_DEFAULT    => 'DROP' ,
+		 REJECT_DEFAULT  => 'REJECT' ,
+		 ACCEPT_DEFAULT  => 'ACCEPT' ,
+		 QUEUE_DEFAULT   => 'QUEUE' ,
+		 NFQUEUE_DEFAULT => 'NFQUEUE' );
 
     my $zone;
     my $firewall = firewall_zone;
     our @zonelist = $config{EXPAND_POLICIES} ? all_zones : ( all_zones, 'all' );
 
-    for my $option ( qw( DROP_DEFAULT REJECT_DEFAULT BLACKLIST_DEFAULT ACCEPT_DEFAULT QUEUE_DEFAULT NFQUEUE_DEFAULT) ) {
-	my $actions = $config{$option};
+    for my $option ( qw( DROP_DEFAULT REJECT_DEFAULT ACCEPT_DEFAULT QUEUE_DEFAULT NFQUEUE_DEFAULT) ) {
+	my $action = $config{$option};
 
-	if ( $actions eq 'none' ) {
-	    $actions = [];
-	} else {
-	    $actions = process_policy_actions( $actions, $option, $actions );
+	unless ( $action eq 'none' ) {
+	    my ( $default, $level, $remainder ) = split( /:/, $action, 3 );
+	    fatal_error "Invalid setting ( $action ) for $option" if supplied $remainder;
+	    $action = process_default_action( $action, $option, $default, $level );
 	}
 
-	$policy_actions{$map{$option}} = $actions;
+	$default_actions{$map{$option}} = $action;
     }
 
     for $zone ( all_zones ) {
@@ -922,36 +903,31 @@ sub process_policies()
 sub process_inline ($$$$$$$$$$$$$$$$$$$$$$);
 
 sub add_policy_rules( $$$$$ ) {
-    my ( $chainref , $target, $loglevel, $pactions, $dropmulticast ) = @_;
+    my ( $chainref , $target, $loglevel, $default, $dropmulticast ) = @_;
 
     unless ( $target eq 'NONE' ) {
-	my @pactions;
-
-	@pactions = @$pactions;
-
 	add_ijump $chainref, j => 'RETURN', d => '224.0.0.0/4' if $dropmulticast && $target ne 'CONTINUE' && $target ne 'ACCEPT';
 
-	for my $paction ( @pactions ) {
-	    my ( $action ) = split ':', $paction;
+	if ( $default && $default ne 'none' ) {
+	    my ( $action ) = split ':', $default;
 
-	    if ( ( $targets{$action} || 0 ) & ACTION ) {
+	    if ( ( $targets{$action} || 0 ) == ACTION ) {
 		#
 		# Default action is a regular action -- jump to the action chain
 		#
-		add_ijump $chainref, j => use_policy_action( $paction, $chainref->{name} );
+		add_ijump $chainref, j => use_policy_action( $default, $chainref->{name} );
 	    } else {
 		#
 		# Default action is an inline 
 		#
-		( undef, my $level )   = split /:/, $paction, 2;
 		( $action, my $param ) = get_target_param( $action );
 
 		process_inline( $action,      #Inline
 				$chainref,    #Chain
 				'',           #Matches
 				'',           #Matches1
-				$level || '', #Log Level and Tag
-				$paction,     #Target
+				$loglevel,    #Log Level and Tag
+				$default,     #Target
 				$param || '', #Param
 				'-',          #Source
 				'-',          #Dest
@@ -975,20 +951,7 @@ sub add_policy_rules( $$$$$ ) {
 	log_rule $loglevel , $chainref , $target , '' if $loglevel ne '';
 	fatal_error "Null target in policy_rules()" unless $target;
 
-	if ( $target eq 'BLACKLIST' ) {
-	    my ( $dbl_type, $dbl_ipset, $dbl_level, $dbl_tag ) = split( ':', $config{DYNAMIC_BLACKLIST} );
-
-	    if ( my $timeout = $globals{DBL_TIMEOUT} ) {
-		add_ijump( $chainref, j => "SET --add-set $dbl_ipset src --exist --timeout $timeout" );
-	    } else {
-		add_ijump( $chainref, j => "SET --add-set $dbl_ipset src --exist" );
-	    }
-
-	    $target = 'DROP';
-	} else {
-	    add_ijump( $chainref , j => 'AUDIT', targetopts => '--type ' . lc $target ) if $chainref->{audit};
-	}
-
+	add_ijump( $chainref , j => 'AUDIT', targetopts => '--type ' . lc $target ) if $chainref->{audit};
 	add_ijump( $chainref , g => $target eq 'REJECT' ? 'reject' : $target ) unless $target eq 'CONTINUE';
     }
 }
@@ -1004,26 +967,27 @@ sub complete_policy_chain( $$$ ) { #Chainref, Source Zone, Destination Zone
     my $chainref   = $_[0];
     my $policyref  = $filter_table->{$chainref->{policychain}};
     my $synparams  = $policyref->{synparams};
-    my $defaults   = $policyref->{pactions};
+    my $default    = $policyref->{default};
     my $policy     = $policyref->{policy};
     my $loglevel   = $policyref->{loglevel};
 
     assert( $policyref );
 
     if ( $chainref eq $policyref ) {
-	add_policy_rules $chainref , $policy, $loglevel , $defaults, $config{MULTICAST};
+	add_policy_rules $chainref , $policy, $loglevel , $default, $config{MULTICAST};
     } else {
 	if ( $policy eq 'ACCEPT' || $policy eq 'QUEUE' || $policy =~ /^NFQUEUE/ ) {
 	    if ( $synparams ) {
 		report_syn_flood_protection;
-		add_policy_rules $chainref , $policy , $loglevel , $defaults, $config{MULTICAST};
+		add_policy_rules $chainref , $policy , $loglevel , $default, $config{MULTICAST};
 	    } else {
 		add_ijump $chainref,  g => $policyref;
 		$chainref = $policyref;
+		add_policy_rules( $chainref, $policy, $loglevel, $default, $config{MULTICAST} ) if $default =~/^macro\./;
 	    }
 	} elsif ( $policy eq 'CONTINUE' ) {
 	    report_syn_flood_protection if $synparams;
-	    add_policy_rules $chainref , $policy , $loglevel , $defaults, $config{MULTICAST};
+	    add_policy_rules $chainref , $policy , $loglevel , $default, $config{MULTICAST};
 	} else {
 	    report_syn_flood_protection if $synparams;
 	    add_ijump $chainref , g => $policyref;
@@ -1046,7 +1010,7 @@ sub complete_policy_chains() {
 	unless ( ( my $policy = $chainref->{policy} ) eq 'NONE' ) {
 	    my $loglevel    = $chainref->{loglevel};
 	    my $provisional = $chainref->{provisional};
-	    my $defaults    = $chainref->{pactions};
+	    my $default     = $chainref->{default};
 	    my $name        = $chainref->{name};
 	    my $synparms    = $chainref->{synparms};
 
@@ -1058,7 +1022,7 @@ sub complete_policy_chains() {
 		    # is a single jump. Generate_matrix() will just use the policy target when
 		    # needed.
 		    #
-		    ensure_rules_chain $name if ( @$defaults         ||
+		    ensure_rules_chain $name if ( $default ne 'none' ||
 						  $loglevel          ||
 						  $synparms          ||
 						  $config{MULTICAST} ||
@@ -1069,7 +1033,7 @@ sub complete_policy_chains() {
 	    }
 
 	    if ( $name =~ /^all[-2]|[-2]all$/ ) {
-		add_policy_rules $chainref , $policy, $loglevel , $defaults, $config{MULTICAST};
+		add_policy_rules $chainref , $policy, $loglevel , $default, $config{MULTICAST};
 	    }
 	}
     }
@@ -1098,18 +1062,20 @@ sub complete_standard_chain ( $$$$ ) {
     my ( $stdchainref, $zone, $zone2, $default ) = @_;
 
     my $ruleschainref = $filter_table->{rules_chain( ${zone}, ${zone2} ) } || $filter_table->{rules_chain( 'all', 'all' ) };
-    my ( $policy, $loglevel ) = ( $default , 6 );
-    my $policy_actions = $policy_actions{$policy};
+    my ( $policy, $loglevel, $defaultaction ) = ( $default , 6, $config{$default . '_DEFAULT'} );
     my $policychainref;
 
     $policychainref = $filter_table->{$ruleschainref->{policychain}} if $ruleschainref;
 
     if ( $policychainref ) {
-	( $policy, $loglevel, $policy_actions ) = @{$policychainref}{'policy', 'loglevel', 'pactions' };
+	( $policy, $loglevel, $defaultaction ) = @{$policychainref}{'policy', 'loglevel', 'default' };
 	$stdchainref->{origin} = $policychainref->{origin};
+    } elsif ( $defaultaction !~ /:/ ) {
+	$defaultaction = normalize_single_action( $defaultaction );
     }
 
-    add_policy_rules $stdchainref , $policy , $loglevel, $policy_actions, 0;
+
+    add_policy_rules $stdchainref , $policy , $loglevel, $defaultaction, 0;
 }
 
 #
@@ -1705,6 +1671,177 @@ sub map_old_actions( $ ) {
     }
 }
 
+#
+# The following small functions generate rules for the builtin actions of the same name
+#
+sub dropBcast( $$$$ ) {
+    my ($chainref, $level, $tag, $audit) = @_;
+
+    my $target = require_audit ( 'DROP', $audit );
+
+    if ( have_capability( 'ADDRTYPE' ) ) {
+	if ( $level ne '' ) {
+	    log_irule_limit( $level, $chainref, 'dropBcast' , 'DROP', [], $tag, 'add', '', addrtype => '--dst-type BROADCAST' );
+	    if ( $family == F_IPV4 ) {
+		log_irule_limit( $level, $chainref, 'dropBcast' , 'DROP', [], $tag, 'add', '', d => '224.0.0.0/4' );
+	    } else {
+		log_irule_limit( $level, $chainref, 'dropBcast' , 'DROP', [], $tag, 'add', '', d => IPv6_MULTICAST );
+	    }
+	}
+
+	add_ijump $chainref, j => $target, addrtype => '--dst-type BROADCAST';
+    } else {
+	if ( $family == F_IPV4 ) {
+	    add_commands $chainref, 'for address in $ALL_BCASTS; do';
+	} else {
+	    add_commands $chainref, 'for address in $ALL_ACASTS; do';
+	}
+
+	incr_cmd_level $chainref;
+	log_irule_limit( $level, $chainref, 'dropBcast' , 'DROP', [], $tag, 'add', '', d => '$address' ) if $level ne '';
+	add_ijump $chainref, j => $target, d => '$address';
+	decr_cmd_level $chainref;
+	add_commands $chainref, 'done';
+    }
+
+    if ( $family == F_IPV4 ) {
+	log_irule_limit $level, $chainref, 'dropBcast' , 'DROP', [], $tag, 'add', '', d => '224.0.0.0/4' if $level ne '';
+	add_ijump $chainref, j => $target, d => '224.0.0.0/4';
+    } else {
+	log_irule_limit( $level, $chainref, 'dropBcast' , 'DROP', [], $tag, 'add', '', d => IPv6_MULTICAST ) if $level ne '';
+	add_ijump $chainref, j => $target, d => IPv6_MULTICAST;
+    }
+}
+
+sub allowBcast( $$$$ ) {
+    my ($chainref, $level, $tag, $audit) = @_;
+
+    my $target = require_audit( 'ACCEPT', $audit );
+
+    if ( $family == F_IPV4 && have_capability( 'ADDRTYPE' ) ) {
+	if ( $level ne '' ) {
+	    log_irule_limit( $level, $chainref, 'allowBcast' , 'ACCEPT', [], $tag, 'add', '', addrtype => '--dst-type BROADCAST' );
+	    log_irule_limit( $level, $chainref, 'allowBcast' , 'ACCEPT', [], $tag, 'add', '', d => '224.0.0.0/4' );
+	}
+
+	add_ijump $chainref, j => $target, addrtype => '--dst-type BROADCAST';
+    } else {
+	if ( $family == F_IPV4 ) {
+	    add_commands $chainref, 'for address in $ALL_BCASTS; do';
+	} else {
+	    add_commands $chainref, 'for address in $ALL_MACASTS; do';
+	}
+
+	incr_cmd_level $chainref;
+	log_irule_limit( $level, $chainref, 'allowBcast' , 'ACCEPT', [], $tag, 'add', '', d => '$address' ) if $level ne '';
+	add_ijump $chainref, j => $target, d => '$address';
+	decr_cmd_level $chainref;
+	add_commands $chainref, 'done';
+    }
+
+    if ( $family == F_IPV4 ) {
+	log_irule_limit( $level, $chainref, 'allowBcast' , 'ACCEPT', [], $tag, 'add', '', d => '224.0.0.0/4' ) if $level ne '';
+	add_ijump $chainref, j => $target, d => '224.0.0.0/4';
+    } else {
+	log_irule_limit( $level, $chainref, 'allowBcast' , 'ACCEPT', '', $tag, 'add',  '', d => IPv6_MULTICAST ) if $level ne '';
+	add_ijump $chainref, j => $target, d => IPv6_MULTICAST;
+    }
+}
+
+sub dropNotSyn ( $$$$ ) {
+    my ($chainref, $level, $tag, $audit) = @_;
+
+    my $target = require_audit( 'DROP', $audit );
+
+    log_irule_limit( $level, $chainref, 'dropNotSyn' , 'DROP', [], $tag, 'add', '', p => '6 ! --syn' ) if $level ne '';
+    add_ijump $chainref , j => $target, p => '6 ! --syn';
+}
+
+sub rejNotSyn ( $$$$ ) {
+    my ($chainref, $level, $tag, $audit) = @_;
+
+    warning_message "rejNotSyn is deprecated in favor of NotSyn(REJECT)";
+
+    my $target = 'REJECT --reject-with tcp-reset';
+
+    if ( supplied $audit ) {
+	$target = require_audit( 'REJECT' , $audit );
+    }
+
+    log_irule_limit( $level, $chainref, 'rejNotSyn' , 'REJECT', [], $tag, 'add', '', p => '6 ! --syn' ) if $level ne '';
+    add_ijump $chainref , j => $target, p => '6 ! --syn';
+}
+
+sub forwardUPnP ( $$$$ ) {
+    my $chainref = set_optflags( 'forwardUPnP', DONT_OPTIMIZE );
+
+    add_commands( $chainref , '[ -f ${VARDIR}/.forwardUPnP ] && cat ${VARDIR}/.forwardUPnP >&3' );
+}
+
+sub allowinUPnP ( $$$$ ) {
+    my ($chainref, $level, $tag, $audit) = @_;
+
+    my $target = require_audit( 'ACCEPT', $audit );
+
+    if ( $level ne '' ) {
+	log_irule_limit( $level, $chainref, 'allowinUPnP' , 'ACCEPT', [], $tag, 'add', '', p => '17 --dport 1900' );
+	log_irule_limit( $level, $chainref, 'allowinUPnP' , 'ACCEPT', [], $tag, 'add', '', p => '6 --dport 49152' );
+    }
+
+    add_ijump $chainref, j => $target, p => '17 --dport 1900';
+    add_ijump $chainref, j => $target, p => '6 --dport 49152';
+}
+
+sub Limit( $$$$ ) {
+    my ($chainref, $level, $tag, $param ) = @_;
+
+    my @param;
+
+    if ( $param ) {
+	@param = split /,/, $param;
+    } else {
+	@param = split /,/, $tag;
+	$tag = '';
+    }
+
+    fatal_error 'Limit rules must include <set name>,<max connections>,<interval> as the log tag or as parameters' unless @param == 3;
+
+    my $set   = $param[0];
+
+    for ( @param[1,2] ) {
+	fatal_error 'Max connections and interval in Limit rules must be numeric (' . join( ':', 'Limit', $level eq '' ? 'none' : $level, $tag ) . ')' unless /^\d+$/
+    }
+
+    my $count = $param[1] + 1;
+
+    require_capability( 'RECENT_MATCH' , 'Limit rules' , '' );
+
+    warning_message "The Limit action is deprecated in favor of per-IP rate limiting using the RATE LIMIT column";
+
+    add_irule $chainref, recent => "--name $set --set";
+
+    if ( $level ne '' ) {
+	my $xchainref = new_chain 'filter' , "$chainref->{name}%";
+	log_irule_limit( $level, $xchainref, $param[0], 'DROP', [], $tag, 'add' , '' );
+	add_ijump $xchainref, j => 'DROP';
+	add_ijump $chainref,  j => $xchainref, recent => "--name $set --update --seconds $param[2] --hitcount $count";
+    } else {
+	add_ijump $chainref, j => 'DROP', recent => "--update --name $set --seconds $param[2] --hitcount $count";
+    }
+
+    add_ijump $chainref, j => 'ACCEPT';
+}
+
+my %builtinops = ( 'dropBcast'      => \&dropBcast,
+		   'allowBcast'     => \&allowBcast,
+		   'dropNotSyn'     => \&dropNotSyn,
+		   'rejNotSyn'      => \&rejNotSyn,
+		   'allowinUPnP'    => \&allowinUPnP,
+		   'forwardUPnP'    => \&forwardUPnP,
+		   'Limit'          => \&Limit,
+		 );
+
+
 sub process_rule ( $$$$$$$$$$$$$$$$$$$$ );
 sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ );
 sub process_snat1( $$$$$$$$$$$$ );
@@ -1726,6 +1863,12 @@ sub process_action(\$\$$) {
     my $actionref = $actions{$action};
     my $matches   = fetch_inline_matches;
 
+    if ( $type & BUILTIN ) {
+	$level = '' if $level =~ /none!?/;
+	$builtinops{$action}->( $chainref, $level, $tag, $param );
+	return 0;
+    }
+
     if ( $type & MANGLE_TABLE ) {
 	fatal_error "Action $action may only be used in the mangle file" unless $chainref->{table} eq 'mangle';
     } else {
@@ -1736,12 +1879,12 @@ sub process_action(\$\$$) {
 
     progress_message2 "$doing $actionfile for chain $chainref->{name}...";
 
+    push_open $actionfile, 2, 1, undef, 2;
+
     my $oldparms = push_action_params( $action, $chainref, $param, $level, $tag, $caller );
     my $options = $actionref->{options};
     my $nolog = $options & ( NOLOG_OPT | LOGJUMP_OPT );
 
-    push_open $actionfile, 2, 1, undef, 2;
-
     setup_audit_action( $action ) if $options & AUDIT_OPT;
 
     $active{$action}++;
@@ -1998,6 +2141,7 @@ sub process_action(\$\$$) {
 #
 # This function is called prior to processing of the policy file. It:
 #
+# - Adds the builtin actions to the target table
 # - Reads actions.std and actions (in that order) and for each entry:
 #   o Adds the action to the target table
 #   o Verifies that the corresponding action file exists
@@ -2006,6 +2150,10 @@ sub process_action(\$\$$) {
 sub process_actions() {
 
     progress_message2 "Locating Action Files...";
+    #
+    # Add built-in actions to the target table and create those actions
+    #
+    $targets{$_} = new_action( $_ , ACTION + BUILTIN, NOINLINE_OPT, '' , '' ) for @builtins;
 
     for my $file ( qw/actions.std actions/ ) {
 	open_file( $file, 2 );
@@ -2570,7 +2718,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
     #
     # Determine the validity of the action
     #
-    $actiontype = $targets{$basictarget} || find_macro( $basictarget );
+    $actiontype = ( $targets{$basictarget} || find_macro ( $basictarget ) );
 
     if ( $config{ MAPOLDACTIONS } ) {
 	( $basictarget, $actiontype , $param ) = map_old_actions( $basictarget ) unless $actiontype || supplied $param;
@@ -2718,8 +2866,6 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 			  # tcp-reset
 			  #
 			  fatal_error "tcp-reset may only be used with PROTO tcp" unless ( resolve_proto( $proto ) || 0 ) == TCP;
-			  $exceptionrule = '-p 6 ';
-			  $param = 'tcp-reset';
 		      }
 
 		      $action = "REJECT --reject-with $param";
@@ -2980,10 +3126,6 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
     my $actionchain; # Name of the action chain
 
     if ( $actiontype & ACTION ) {
-	#
-	# Handle 'section' option
-	#
-	$param = supplied $param ? join( ',' , $section_rmap{$section}, $param ) : $section_rmap{$section} if $actions{$basictarget}{options} & SECTION_OPT;
 	#
 	# Create the action:level:tag:param tuple.
 	#

Shorewall/Perl/Shorewall/Tc.pm

@@ -1924,7 +1924,7 @@ sub process_traffic_shaping() {
 
 			my ( $options, $redopts ) = ( '', $tcref->{redopts} );
 
-			for my $option ( keys %validredoptions ) {
+			for my $option ( sort keys %validredoptions ) {
 			    my $type = $validredoptions{$option};
 
 			    if ( my $value = $redopts->{$option} ) {
@@ -1943,7 +1943,7 @@ sub process_traffic_shaping() {
 
 			my ( $options, $codelopts ) = ( '', $tcref->{codelopts} );
 
-			for my $option ( keys %validcodeloptions ) {
+			for my $option ( sort keys %validcodeloptions ) {
 			    my $type = $validcodeloptions{$option};
 
 			    if ( my $value = $codelopts->{$option} ) {
@@ -2312,10 +2312,9 @@ EOF
 EOF
 
 	}
+
+	return ( $mangle, $fn1 );
     }
-
-    return ( $mangle, $fn1 );
-
 }
 
 #

Shorewall/Perl/Shorewall/Zones.pm

@@ -407,8 +407,6 @@ sub initialize( $$ ) {
 				    forward     => BINARY_IF_OPTION,
 				    physical    => STRING_IF_OPTION + IF_OPTION_HOST,
 				    unmanaged   => SIMPLE_IF_OPTION,
-				    upnp        => SIMPLE_IF_OPTION,
-				    upnpclient  => SIMPLE_IF_OPTION,
 				    wait        => NUMERIC_IF_OPTION + IF_OPTION_WILDOK,
 				 );
 	%validhostoptions = (
@@ -715,10 +713,10 @@ sub zone_report()
 	my $printed = 0;
 
 	if ( $hostref ) {
-	    for my $type ( keys %$hostref ) {
+	    for my $type ( sort keys %$hostref ) {
 		my $interfaceref = $hostref->{$type};
 
-		for my $interface ( keys %$interfaceref ) {
+		for my $interface ( sort keys %$interfaceref ) {
 		    my $iref     = $interfaces{$interface};
 		    my $arrayref = $interfaceref->{$interface};
 
@@ -768,10 +766,10 @@ sub dump_zone_contents() {
 	$entry .= ( " mark=" . in_hex( $zoneref->{mark} ) ) if exists $zoneref->{mark};
 
 	if ( $hostref ) {
-	    for my $type ( keys %$hostref ) {
+	    for my $type ( sort keys %$hostref ) {
 		my $interfaceref = $hostref->{$type};
 
-		for my $interface ( keys %$interfaceref ) {
+		for my $interface ( sort keys %$interfaceref ) {
 		    my $iref     = $interfaces{$interface};
 		    my $arrayref = $interfaceref->{$interface};
 
@@ -1277,7 +1275,6 @@ sub process_interface( $$ ) {
 		my $numval = numeric_value $value;
 		fatal_error "Invalid value ($value) for option $option" unless defined $numval && $numval <= $maxoptionvalue{$option};
 		require_capability 'TCPMSS_TARGET', "mss=$value", 's' if $option eq 'mss';
-		$options{logmartians} = 1 if $option eq 'routefilter' && $numval && ! $config{LOG_MARTIANS};
 		$options{$option} = $numval;
 		$hostoptions{$option} = $numval if $hostopt;
 	    } elsif ( $type == IPLIST_IF_OPTION ) {
@@ -2221,9 +2218,9 @@ sub find_hosts_by_option( $ ) {
     }
 
     for my $zone ( grep ! ( $zones{$_}{type} & FIREWALL ) , @zones ) {
-	for my $type (keys %{$zones{$zone}{hosts}} ) {
+	for my $type (sort keys %{$zones{$zone}{hosts}} ) {
 	    my $interfaceref = $zones{$zone}{hosts}->{$type};
-	    for my $interface ( keys %$interfaceref ) {
+	    for my $interface ( sort keys %$interfaceref ) {
 		my $arrayref = $interfaceref->{$interface};
 		for my $host ( @{$arrayref} ) {
 		    my $ipsec  = $host->{ipsec};
@@ -2251,9 +2248,9 @@ sub find_zone_hosts_by_option( $$ ) {
     my @hosts;
 
     unless ( $zones{$zone}{type} & FIREWALL ) {
-	for my $type (keys %{$zones{$zone}{hosts}} ) {
+	for my $type (sort keys %{$zones{$zone}{hosts}} ) {
 	    my $interfaceref = $zones{$zone}{hosts}->{$type};
-	    for my $interface ( keys %$interfaceref ) {
+	    for my $interface ( sort keys %$interfaceref ) {
 		my $arrayref = $interfaceref->{$interface};
 		for my $host ( @{$arrayref} ) {
 		    if ( my $value = $host->{options}{$option} ) {

Shorewall/Perl/lib.runtime

@@ -349,7 +349,7 @@ replace_default_route() # $1 = USE_DEFAULT_RT
 	case "$default_route" in
 	    *metric*)
 	        #
-	        # Don't restore a default route with a metric unless USE_DEFAULT_RT=Yes or =Exact. Otherwise, we only replace the one with metric 0
+	        # Don't restore a default route with a metric unless USE_DEFAULT_RT=Yes. Otherwise, we only replace the one with metric 0
 	        #
 		[ -n "$1" ] && qt $IP -$g_family route replace $default_route && progress_message "Default Route (${default_route# }) restored"
 		default_route=

Shorewall/Samples/Universal/params

@@ -1,13 +0,0 @@
-#
-# Shorewall - Sample Params File for universal configuration.
-# Copyright (C) 2006-2014 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------------------------------------
-# For information on entries in this file, type "man shorewall-params"
-######################################################################################################################################################################################################

Shorewall/Samples/Universal/policy

@@ -7,6 +7,7 @@
 # http://www.shorewall.net/manpages/shorewall-policy.html
 #
 ###############################################################################
-#SOURCE	DEST	POLICY		LOGLEVEL	RATE		CONNLIMIT
+#SOURCE	DEST	POLICY		LOG	LIMIT:		CONNLIMIT:
+#				LEVEL	BURST		MASK
 $FW	net	ACCEPT
-net	all	DROP		$LOG_LEVEL
+net	all	DROP

Shorewall/Samples/Universal/shorewall.conf

@@ -33,8 +33,6 @@ FIREWALL=
 #		                L O G G I N G
 ###############################################################################
 
-LOG_LEVEL="info"
-
 BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
@@ -55,19 +53,19 @@ LOGTAGONLY=No
 
 LOGLIMIT="s:1/sec:10"
 
-MACLIST_LOG_LEVEL="$LOG_LEVEL"
+MACLIST_LOG_LEVEL=info
 
 RELATED_LOG_LEVEL=
 
-RPFILTER_LOG_LEVEL="$LOG_LEVEL"
+RPFILTER_LOG_LEVEL=info
 
-SFILTER_LOG_LEVEL="$LOG_LEVEL"
+SFILTER_LOG_LEVEL=info
 
-SMURF_LOG_LEVEL="$LOG_LEVEL"
+SMURF_LOG_LEVEL=info
 
 STARTUP_LOG=/var/log/shorewall-init.log
 
-TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
+TCP_FLAGS_LOG_LEVEL=info
 
 UNTRACKED_LOG_LEVEL=
 
@@ -110,11 +108,10 @@ TC=
 ###############################################################################
 
 ACCEPT_DEFAULT="none"
-BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
-DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
+DROP_DEFAULT="Drop"
 NFQUEUE_DEFAULT="none"
 QUEUE_DEFAULT="none"
-REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
+REJECT_DEFAULT="Reject"
 
 ###############################################################################
 #                        R S H / R C P  C O M M A N D S
@@ -143,8 +140,6 @@ AUTOHELPERS=Yes
 
 AUTOMAKE=Yes
 
-BALANCE_PROVIDERS=No
-
 BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"

Shorewall/Samples/one-interface/params

@@ -1,13 +0,0 @@
-#
-# Shorewall - Sample Params File for one-interface configuration.
-# Copyright (C) 2006-2014 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------------------------------------
-# For information on entries in this file, type "man shorewall-params"
-######################################################################################################################################################################################################

Shorewall/Samples/one-interface/policy

@@ -11,8 +11,8 @@
 #-----------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-policy"
 ###############################################################################
-#SOURCE	DEST		POLICY		LOGLEVEL	RATE	CONNLIMIT
-$FW	net		ACCEPT
-net	all		DROP		$LOG_LEVEL
+#SOURCE		DEST		POLICY		LOG LEVEL	LIMIT:BURST
+$FW		net		ACCEPT
+net		all		DROP		info
 # The FOLLOWING POLICY MUST BE LAST
-all	all		REJECT		$LOG_LEVEL
+all		all		REJECT		info

Shorewall/Samples/one-interface/shorewall.conf

@@ -44,8 +44,6 @@ FIREWALL=
 #		                L O G G I N G
 ###############################################################################
 
-LOG_LEVEL=info
-
 BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
@@ -66,19 +64,19 @@ LOGTAGONLY=No
 
 LOGLIMIT="s:1/sec:10"
 
-MACLIST_LOG_LEVEL="$LOG_LEVEL"
+MACLIST_LOG_LEVEL=info
 
 RELATED_LOG_LEVEL=
 
-RPFILTER_LOG_LEVEL="$LOG_LEVEL"
+RPFILTER_LOG_LEVEL=info
 
-SFILTER_LOG_LEVEL="$LOG_LEVEL"
+SFILTER_LOG_LEVEL=info
 
-SMURF_LOG_LEVEL="$LOG_LEVEL"
+SMURF_LOG_LEVEL=info
 
 STARTUP_LOG=/var/log/shorewall-init.log
 
-TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
+TCP_FLAGS_LOG_LEVEL=info
 
 UNTRACKED_LOG_LEVEL=
 
@@ -121,11 +119,10 @@ TC=
 ###############################################################################
 
 ACCEPT_DEFAULT="none"
-BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
-DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
+DROP_DEFAULT="Drop"
 NFQUEUE_DEFAULT="none"
 QUEUE_DEFAULT="none"
-REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
+REJECT_DEFAULT="Reject"
 
 ###############################################################################
 #                        R S H / R C P  C O M M A N D S
@@ -154,8 +151,6 @@ AUTOHELPERS=Yes
 
 AUTOMAKE=Yes
 
-BALANCE_PROVIDERS=No
-
 BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"

Shorewall/Samples/three-interfaces/params

@@ -1,13 +0,0 @@
-#
-# Shorewall - Sample Params File for three-interface configuration.
-# Copyright (C) 2006-2014 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------------------------------------
-# For information on entries in this file, type "man shorewall-params"
-######################################################################################################################################################################################################

Shorewall/Samples/three-interfaces/policy

@@ -11,9 +11,9 @@
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-policy"
 ###############################################################################
-#SOURCE	DEST		POLICY		LOGLEVEL	RATE	CONNLIMIT
+#SOURCE		DEST		POLICY		LOG LEVEL	LIMIT:BURST
 
-loc	net		ACCEPT
-net	all		DROP		$LOG_LEVEL
+loc		net		ACCEPT
+net		all		DROP		info
 # THE FOLLOWING POLICY MUST BE LAST
-all	all		REJECT		$LOG_LEVEL
+all		all		REJECT		info

Shorewall/Samples/three-interfaces/shorewall.conf

@@ -41,8 +41,6 @@ FIREWALL=
 #		                L O G G I N G
 ###############################################################################
 
-LOG_LEVEL="info"
-
 BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
@@ -63,19 +61,19 @@ LOGTAGONLY=No
 
 LOGLIMIT="s:1/sec:10"
 
-MACLIST_LOG_LEVEL="$LOG_LEVEL"
+MACLIST_LOG_LEVEL=info
 
 RELATED_LOG_LEVEL=
 
-RPFILTER_LOG_LEVEL="$LOG_LEVEL"
+RPFILTER_LOG_LEVEL=info
 
-SFILTER_LOG_LEVEL="$LOG_LEVEL"
+SFILTER_LOG_LEVEL=info
 
-SMURF_LOG_LEVEL="$LOG_LEVEL"
+SMURF_LOG_LEVEL=info
 
 STARTUP_LOG=/var/log/shorewall-init.log
 
-TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
+TCP_FLAGS_LOG_LEVEL=info
 
 UNTRACKED_LOG_LEVEL=
 
@@ -118,11 +116,10 @@ TC=
 ###############################################################################
 
 ACCEPT_DEFAULT="none"
-BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
-DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
+DROP_DEFAULT="Drop"
 NFQUEUE_DEFAULT="none"
 QUEUE_DEFAULT="none"
-REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
+REJECT_DEFAULT="Reject"
 
 ###############################################################################
 #                        R S H / R C P  C O M M A N D S
@@ -151,8 +148,6 @@ AUTOHELPERS=Yes
 
 AUTOMAKE=Yes
 
-BALANCE_PROVIDERS=No
-
 BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"

Shorewall/Samples/two-interfaces/params

@@ -1,13 +0,0 @@
-#
-# Shorewall - Sample Params File for two-interface configuration.
-# Copyright (C) 2006-2014 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------------------------------------
-# For information on entries in this file, type "man shorewall-params"
-######################################################################################################################################################################################################

Shorewall/Samples/two-interfaces/policy

@@ -11,10 +11,10 @@
 #------------------------------------------------------------------------------
 # For information about entries in this file, type "man shorewall-policy"
 ###############################################################################
-#SOURCE	DEST		POLICY		LOGLEVEL	RATE	CONNLIMIT
+#SOURCE		DEST		POLICY		LOG LEVEL	LIMIT:BURST
 
-loc	net		ACCEPT
-net	all		DROP		$LOG_LEVEL
-# THE FOLOWING POLICY MUST BE LAST
-all	all		REJECT		$LOG_LEVEL
+loc		net		ACCEPT
+net		all		DROP		info
+# THE FOLLOWING POLICY MUST BE LAST
+all		all		REJECT		info
 

Shorewall/Samples/two-interfaces/shorewall.conf

@@ -44,8 +44,6 @@ FIREWALL=
 #		                L O G G I N G
 ###############################################################################
 
-LOG_LEVEL="info"
-
 BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
@@ -66,19 +64,19 @@ LOGTAGONLY=No
 
 LOGLIMIT="s:1/sec:10"
 
-MACLIST_LOG_LEVEL="$LOG_LEVEL"
+MACLIST_LOG_LEVEL=info
 
 RELATED_LOG_LEVEL=
 
-RPFILTER_LOG_LEVEL="$LOG_LEVEL"
+RPFILTER_LOG_LEVEL=info
 
-SFILTER_LOG_LEVEL="$LOG_LEVEL"
+SFILTER_LOG_LEVEL=info
 
-SMURF_LOG_LEVEL="$LOG_LEVEL"
+SMURF_LOG_LEVEL=info
 
 STARTUP_LOG=/var/log/shorewall-init.log
 
-TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
+TCP_FLAGS_LOG_LEVEL=info
 
 UNTRACKED_LOG_LEVEL=
 
@@ -121,11 +119,10 @@ TC=
 ###############################################################################
 
 ACCEPT_DEFAULT="none"
-BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
-DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
+DROP_DEFAULT="Drop"
 NFQUEUE_DEFAULT="none"
 QUEUE_DEFAULT="none"
-REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
+REJECT_DEFAULT="Reject"
 
 ###############################################################################
 #                        R S H / R C P  C O M M A N D S
@@ -154,8 +151,6 @@ AUTOHELPERS=Yes
 
 AUTOMAKE=Yes
 
-BALANCE_PROVIDERS=No
-
 BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"

Shorewall/Samples/two-interfaces/snat

@@ -20,4 +20,4 @@
 MASQUERADE		10.0.0.0/8,\
 			169.254.0.0/16,\
 			172.16.0.0/12,\
-			192.168.0.0/16		eth0
+			92.168.0.0/16		eth0

Shorewall/actions.std

@@ -6,48 +6,47 @@
 #	Please see http://shorewall.net/Actions.html for additional
 #	information.
 #
+# Builtin Actions are:
+#
+?if 0
+A_ACCEPT                        # Audits then accepts a connection request
+A_DROP                          # Audits then drops a connection request
+allowBcast		        # Silently Allow Broadcast/multicast
+dropBcast		        # Silently Drop Broadcast/multicast
+dropNotSyn		        # Silently Drop Non-syn TCP packets
+rejNotSyn		        # Silently Reject Non-syn TCP packets
+allowinUPnP	                # Allow UPnP inbound (to firewall) traffic
+forwardUPnP	                # Allow traffic that upnpd has redirected from 'upnp' interfaces.
+Limit                           # Limit the rate of connections from each individual IP address
+?endif
 ###############################################################################
 #ACTION
-A_AllowICMPs inline		# Audited version of AllowICMPs
-A_Drop				# Audited Default Action for DROP policy
-A_REJECT     noinline,logjump	# Audits then rejects a connection request
-A_REJECT!    inline		# Audits then rejects a connection request
-A_Reject			# Audited Default action for REJECT policy
-AllowICMPs   inline		# Allow Required ICMP packets
-allowBcast   inline		# Silently Allow Broadcast
-allowinUPnP  inline		# Allow UPnP inbound (to firewall) traffic
+A_Drop 		                # Audited Default Action for DROP policy
+A_REJECT     noinline,logjump   # Audits then rejects a connection request
+A_REJECT!    inline             # Audits then rejects a connection request
+A_Reject	                # Audited Default action for REJECT policy
 allowInvalid inline		# Accepts packets in the INVALID conntrack state
-allowMcast   inline		# Silently Allow Multicast
-AutoBL	     noinline		# Auto-blacklist IPs that exceed thesholds
-AutoBLL	     noinline		# Helper for AutoBL
-BLACKLIST    logjump,section	# Add sender to the dynamic blacklist
-Broadcast    noinline,audit	# Handles Broadcast/Anycast
-DNSAmp				# Matches one-question recursive DNS queries
-Drop				# Default Action for DROP policy (deprecated)
-dropBcast    inline		# Silently Drop Broadcast
+AutoBL       noinline           # Auto-blacklist IPs that exceed thesholds
+AutoBLL      noinline           # Helper for AutoBL
+Broadcast    noinline,audit     # Handles Broadcast/Multicast/Anycast
+DNSAmp                          # Matches one-question recursive DNS queries
+Drop		                # Default Action for DROP policy
 dropInvalid  inline		# Drops packets in the INVALID conntrack state
-dropMcast    inline		# Silently Drop Multicast
-dropNotSyn   noinline		# Silently Drop Non-syn TCP packets
-DropDNSrep   inline		# Drops DNS replies
-DropSmurfs   noinline		# Drop smurf packets
+DropSmurfs   noinline           # Drop smurf packets
 Established  inline,\		# Handles packets in the ESTABLISHED state
-	     state=ESTABLISHED	#
-forwardUPnP  noinline		# Allow traffic that upnpd has redirected from 'upnp' interfaces.
+	     state=ESTABLISHED  #
 GlusterFS    inline		# Handles GlusterFS
-IfEvent	     noinline		# Perform an action based on an event
-Invalid	     inline,audit,\	# Handles packets in the INVALID conntrack state
-	     state=INVALID	#
-Limit	     noinline		# Limit the rate of connections from each individual IP address
-Multicast    noinline,audit	# Handles Multicast
+IfEvent      noinline           # Perform an action based on an event
+Invalid      inline,audit,\     # Handles packets in the INVALID conntrack state
+             state=INVALID      #
 New	     inline,state=NEW	# Handles packets in the NEW conntrack state
-NotSyn	     inline,audit	# Handles TCP packets which do not have SYN=1 and ACK=0
-rejNotSyn    noinline		# Silently Reject Non-syn TCP packets
-Reject				# Default Action for REJECT policy (deprecated)
-Related	     inline,\		# Handles packets in the RELATED conntrack state
-	     state=RELATED	#
+NotSyn       inline,audit       # Handles TCP packets which do not have SYN=1 and ACK=0
+Reject                          # Default Action for REJECT policy
+Related      inline,\		# Handles packets in the RELATED conntrack state
+             state=RELATED      #
 ResetEvent   inline		# Reset an Event
-RST	     inline,audit	# Handle packets with RST set
+RST	     inline,audit       # Handle packets with RST set
 SetEvent     inline		# Initialize an event
-TCPFlags			# Handle bad flag combinations.
-Untracked    inline,\		# Handles packets in the UNTRACKED conntrack state
-	     state=UNTRACKED	#
+TCPFlags    			# Handle bad flag combinations.
+Untracked    inline,\           # Handles packets in the UNTRACKED conntrack state
+	     state=UNTRACKED    #

Shorewall/configfiles/policy

@@ -7,4 +7,4 @@
 # http://www.shorewall.net/manpages/shorewall-policy.html
 #
 ###############################################################################
-#SOURCE		DEST		POLICY	LOGLEVEL	RATE	CONNLIMIT
+#SOURCE		DEST		POLICY	LOGLEVEL	LIMIT	CONNLIMIT

Shorewall/configfiles/shorewall.conf

@@ -33,8 +33,6 @@ FIREWALL=
 #			       L O G G I N G
 ###############################################################################
 
-LOG_LEVEL="info"
-
 BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
@@ -55,19 +53,19 @@ LOGTAGONLY=No
 
 LOGLIMIT="s:1/sec:10"
 
-MACLIST_LOG_LEVEL="$LOG_LEVEL"
+MACLIST_LOG_LEVEL=info
 
 RELATED_LOG_LEVEL=
 
-RPFILTER_LOG_LEVEL="$LOG_LEVEL"
+RPFILTER_LOG_LEVEL=info
 
-SFILTER_LOG_LEVEL="$LOG_LEVEL"
+SFILTER_LOG_LEVEL=info
 
-SMURF_LOG_LEVEL="$LOG_LEVEL"
+SMURF_LOG_LEVEL=info
 
 STARTUP_LOG=/var/log/shorewall-init.log
 
-TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
+TCP_FLAGS_LOG_LEVEL=info
 
 UNTRACKED_LOG_LEVEL=
 
@@ -109,12 +107,11 @@ TC=
 #		D E F A U L T   A C T I O N S / M A C R O S
 ###############################################################################
 
-ACCEPT_DEFAULT="none"
-BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
-DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
-NFQUEUE_DEFAULT="none"
-QUEUE_DEFAULT="none"
-REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
+ACCEPT_DEFAULT=none
+DROP_DEFAULT=Drop
+NFQUEUE_DEFAULT=none
+QUEUE_DEFAULT=none
+REJECT_DEFAULT=Reject
 
 ###############################################################################
 #			 R S H / R C P	C O M M A N D S
@@ -143,8 +140,6 @@ AUTOHELPERS=Yes
 
 AUTOMAKE=Yes
 
-BALANCE_PROVIDERS=No
-
 BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"

Shorewall/default.debian

@@ -1,5 +1,5 @@
 # prevent startup with default configuration
-# set the following variable to 1 in order to allow Shorewall to start
+# set the following varible to 1 in order to allow Shorewall to start
 
 startup=0
 
@@ -16,7 +16,7 @@ startup=0
 #    wait_interface=
 
 #
-# Global start/restart/reload/stop options
+# Global start/restart options
 #
 OPTIONS=""
 
@@ -28,17 +28,12 @@ STARTOPTIONS=""
 #
 # Restart options
 #
-RESTARTOPTIONS=""
-
-#
-# Reload options
-#
 RELOADOPTIONS=""
 
 #
-# Stop options
+# Restart options
 #
-STOPOPTIONS=""
+RESTARTOPTIONS=""
 
 #
 # Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf

Shorewall/default.debian.systemd

@@ -1,26 +0,0 @@
-#
-# Global start/restart/reload/stop options
-#
-OPTIONS=""
-
-#
-# Start options
-#
-STARTOPTIONS=""
-
-#
-# Restart options
-#
-RESTARTOPTIONS=""
-
-#
-# Reload options
-#
-RELOADOPTIONS=""
-
-#
-# Stop options
-#
-STOPOPTIONS=""
-
-# EOF

Shorewall/install.sh

@@ -22,22 +22,55 @@
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=4.5.5       #The Build script inserts the actual version
 
+#
+# Change to the directory containing this script
+#
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
-    echo "  -s"
-    echo "  -a"
-    echo "  -p"
-    echo "  -n"
+    echo "usage: $ME [ <configuration-file> ]"
+    echo "       $ME -v"
+    echo "       $ME -h"
+    echo "       $ME -s"
+    echo "       $ME -a"
+    echo "       $ME -n"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
 run_install()
 {
     if ! install $*; then
@@ -47,14 +80,27 @@ run_install()
     fi
 }
 
+cant_autostart()
+{
+    echo
+    echo  "WARNING: Unable to configure $PRODUCT to start automatically at boot" >&2
+}
+
+delete_file() # $1 = file to delete
+{
+    rm -f $1
+}
+
 install_file() # $1 = source $2 = target $3 = mode
 {
     run_install $T $OWNERSHIP -m $3 $1 ${2}
 }
 
-#
-# Change to the directory containing this script
-#
+require()
+{
+    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
+}
+
 cd "$(dirname $0)"
 
 if [ -f shorewall.service ]; then
@@ -65,11 +111,6 @@ else
     Product=Shorewall6
 fi
 
-#
-# Source common functions
-#
-. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
 #
 # Parse the run line
 #
@@ -131,14 +172,11 @@ done
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-	file=./shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
+	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
-	file=~/.shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
+	. ~/.shorewallrc || exit 1
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	file=/usr/share/shorewall/shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -148,11 +186,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
@@ -267,7 +305,8 @@ case "$HOST" in
     linux)
 	;;
     *)
-	fatal_error "Unknown HOST \"$HOST\""
+	echo "ERROR: Unknown HOST \"$HOST\"" >&2
+	exit 1;
 	;;
 esac
 
@@ -278,7 +317,8 @@ if [ $PRODUCT = shorewall ]; then
 	#
 	if [ "$DIGEST" != SHA ]; then
 	    if [ "$BUILD" = "$HOST" ] && ! eval perl -e \'use Digest::$DIGEST\;\' 2> /dev/null ; then
-		fatal_error "Perl compilation with Digest::$DIGEST failed"
+		echo "ERROR: Perl compilation with Digest::$DIGEST failed" >&2
+		exit 1;
 	    fi
 
 	    cp -af Perl/Shorewall/Chains.pm Perl/Shorewall/Chains.pm.bak
@@ -301,7 +341,8 @@ if [ $PRODUCT = shorewall ]; then
 		sed -i 's/Digest::SHA/Digest::SHA1/' Perl/Shorewall/Config.pm
 		DIGEST=SHA1
 	    else
-		fatal_error "Shorewall $VERSION requires either Digest::SHA or Digest::SHA1"
+		echo "ERROR: Shorewall $VERSION requires either Digest::SHA or Digest::SHA1" >&2
+		exit 1
 	    fi
 	fi
     fi
@@ -329,10 +370,11 @@ if [ $BUILD != cygwin ]; then
     fi
 fi
 
-run_install -d $OWNERSHIP -m 0755 ${DESTDIR}${SBINDIR}
-[ -n "${INITFILE}" ] && run_install -d $OWNERSHIP -m 0755 ${DESTDIR}${INITDIR}
+install -d $OWNERSHIP -m 755 ${DESTDIR}${SBINDIR}
+[ -n "${INITFILE}" ] && install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
 if [ -z "$DESTDIR" -a $PRODUCT != shorewall ]; then
-    [ -x ${LIBEXECDIR}/shorewall/compiler.pl ] || fatal_error "Shorewall >= 4.5.0 is not installed"
+    [ -x ${LIBEXECDIR}/shorewall/compiler.pl ] || \
+	{ echo "   ERROR: Shorewall >= 4.5.0 is not installed" >&2; exit 1; }
 fi
 
 echo "Installing $Product Version $VERSION"
@@ -346,7 +388,7 @@ else
     first_install="Yes"
 fi
 
-if [ -z "${DESTDIR}" -a $PRODUCT = shorewall -a ! -f ${SHAREDIR}/shorewall/coreversion ]; then
+if [ -z "${DESTDIR}" -a $PRODUCT = shorewall -a ! -f ${SHAREDIR}/$PRODUCT/coreversion ]; then
     echo "Shorewall $VERSION requires Shorewall Core which does not appear to be installed"
     exit 1
 fi
@@ -368,16 +410,22 @@ fi
 #
 # Create /etc/$PRODUCT and other directories
 #
-make_parent_directory ${DESTDIR}${CONFDIR}/$PRODUCT 0755
-make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
-make_parent_directory ${DESTDIR}${PERLLIBDIR}/Shorewall 0755
-make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles 0755
-make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated 0755
-make_parent_directory ${DESTDIR}${VARDIR} 0755
+mkdir -p ${DESTDIR}${CONFDIR}/$PRODUCT
+mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
+mkdir -p ${DESTDIR}${PERLLIBDIR}/Shorewall
+mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles
+mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated
+mkdir -p ${DESTDIR}${VARDIR}
 
-chmod 0755 ${DESTDIR}${SHAREDIR}/$PRODUCT
+chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated
 
-[ -n "$DESTDIR" ] && make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
+if [ -n "$DESTDIR" ]; then
+    mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
+fi
 
 #
 # Install the .service file
@@ -387,9 +435,9 @@ if [ -z "${SERVICEDIR}" ]; then
 fi
 
 if [ -n "$SERVICEDIR" ]; then
-    make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 0644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
@@ -433,24 +481,6 @@ if [ -z "$first_install" ]; then
     delete_file ${DESTDIR}${MANDIR}/man5/$PRODUCT/${PRODUCT}-stoppedrules
     delete_file ${DESTDIR}${MANDIR}/man5/$PRODUCT/${PRODUCT}-notrack
     delete_file ${DESTDIR}${MANDIR}/man5/$PRODUCT/${PRODUCT}-blacklist
-
-    if [ $PRODUCT = shorewall ]; then
-	#
-	# Delete deprecated macros and actions
-	#
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall/macro.SNMPTrap
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall/action.A_REJECT
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall/action.Drop
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall/action.Reject
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall/action.A_Drop
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall/action.A_Reject
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall/action.A_AllowICMPs
-    else
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall6/action.A_AllowICMPs
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall6/action.AllowICMPs
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall6/action.Broadcast
-	delete_file ${DESTDIR}${SHAREDIR}/shorewall6/action.Multicast
-    fi
 fi
 
 #
@@ -1054,14 +1084,8 @@ cd ..
 #
 for f in lib.* Perl/lib.*; do
     if [ -f $f ]; then
-        case $f in
-            *installer)
-                ;;
-            *)
-                install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$(basename $f) 0644
-                echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
-                ;;
-        esac
+	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$(basename $f) 0644
+	echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
     fi
 done
 
@@ -1071,7 +1095,7 @@ if [ $PRODUCT = shorewall6 ]; then
     #
     ln -sf lib.base ${DESTDIR}${SHAREDIR}/$PRODUCT/functions
     #
-    # And create a symbolic link for the CLI
+    # And create a sybolic link for the CLI
     #
     ln -sf shorewall ${DESTDIR}${SBINDIR}/shorewall6
 fi
@@ -1080,7 +1104,8 @@ if [ -d Perl ]; then
     #
     # ${SHAREDIR}/$PRODUCT/$Product if needed
     #
-    make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT/$Product 0755
+    mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT/$Product
+    chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT/$Product
     #
     # Install the Compiler
     #
@@ -1129,7 +1154,7 @@ fi
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}${SHAREDIR}/$PRODUCT/version
-chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
+chmod 644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 #
 # Remove and create the symbolic link to the init script
 #
@@ -1147,7 +1172,7 @@ if [ -n "$MANDIR" ]; then
 
 cd manpages
 
-[ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man5 0755
+[ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/
 
 for f in *.5; do
     gzip -9c $f > $f.gz
@@ -1155,7 +1180,7 @@ for f in *.5; do
     echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
 done
 
-[ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
+[ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man8/
 
 for f in *.8; do
     gzip -9c $f > $f.gz
@@ -1178,7 +1203,8 @@ fi
 #
 if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
     if [ ${DESTDIR} ]; then
-	make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+	mkdir -p ${DESTDIR}${SYSCONFDIR}
+	chmod 755 ${DESTDIR}${SYSCONFDIR}
     fi
 
     run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT
@@ -1236,6 +1262,6 @@ if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${
 fi
 
 #
-# Report Success
+#  Report Success
 #
 echo "$Product Version $VERSION Installed"

Shorewall/lib.cli-std

@@ -443,21 +443,20 @@ compiler() {
     fi
 
     options="--verbose=$VERBOSITY --family=$g_family --config_path=$CONFIG_PATH --shorewallrc=${shorewallrc}"
-
-    [ -n "$shorewallrc1" ]     && options="$options --shorewallrc1=${shorewallrc1}"
-    [ -n "$STARTUP_LOG" ]      && options="$options --log=$STARTUP_LOG"
-    [ -n "$LOG_VERBOSITY" ]    && options="$options --log_verbosity=$LOG_VERBOSITY";
-    [ -n "$g_export" ]         && options="$options --export"
-    [ -n "$g_shorewalldir" ]   && options="$options --directory=$g_shorewalldir"
-    [ -n "$g_timestamp" ]      && options="$options --timestamp"
-    [ -n "$g_test" ]           && options="$options --test"
-    [ -n "$g_preview" ]        && options="$options --preview"
+    [ -n "$shorewallrc1" ] && options="$options --shorewallrc1=${shorewallrc1}"
+    [ -n "$STARTUP_LOG" ] && options="$options --log=$STARTUP_LOG"
+    [ -n "$LOG_VERBOSITY" ] && options="$options --log_verbosity=$LOG_VERBOSITY";
+    [ -n "$g_export" ] && options="$options --export"
+    [ -n "$g_shorewalldir" ] && options="$options --directory=$g_shorewalldir"
+    [ -n "$g_timestamp" ] && options="$options --timestamp"
+    [ -n "$g_test" ] && options="$options --test"
+    [ -n "$g_preview" ] && options="$options --preview"
     [ "$g_debugging" = trace ] && options="$options --debug"
-    [ -n "$g_refreshchains" ]  && options="$options --refresh=$g_refreshchains"
-    [ -n "$g_confess" ]        && options="$options --confess"
-    [ -n "$g_update" ]         && options="$options --update"
-    [ -n "$g_annotate" ]       && options="$options --annotate"
-    [ -n "$g_inline" ]         && options="$options --inline"
+    [ -n "$g_refreshchains" ] && options="$options --refresh=$g_refreshchains"
+    [ -n "$g_confess" ] && options="$options --confess"
+    [ -n "$g_update" ] && options="$options --update"
+    [ -n "$g_annotate" ] && options="$options --annotate"
+    [ -n "$g_inline" ] && options="$options --inline"
 
     if [ -n "$PERL" ]; then
 	if [ ! -x "$PERL" ]; then
@@ -484,9 +483,6 @@ compiler() {
     #
     [ "$g_debugging" != trace -a -z "$g_preview" ] || [ -n "$g_debug" ] && g_pager=
 
-    PERL_HASH_SEED=0
-    export PERL_HASH_SEED
-
     if [ ${PERLLIBDIR} = ${LIBEXECDIR}/shorewall ]; then
 	eval $PERL $debugflags $pc $options $@ $g_pager
     else

Shorewall/manpages/shorewall-actions.xml

@@ -191,25 +191,6 @@
               </listitem>
             </varlistentry>
 
-            <varlistentry>
-              <term><option>section</option></term>
-
-              <listitem>
-                <para>Added in Shorewall 5.1.1. When specified, this option
-                causes the rules file section name and a comma to be prepended
-                to the parameters passed to the action (if any). Note that
-                this means that the first parameter passed to the action by
-                the user is actually the second parameter to the action. If
-                the action is invoked out of the blrules file, 'BLACKLIST' is
-                used as the section name.</para>
-
-                <para>Given that neither the <filename>snat</filename> nor the
-                <filename>mangle</filename> file is sectioned, this parameter
-                has no effect when <option>mangle</option> or
-                <option>nat</option> is specified. </para>
-              </listitem>
-            </varlistentry>
-
             <varlistentry>
               <term><option>state</option>={<option>UNTRACKED</option>|<option>NEW</option>|<option>ESTABLISHED</option>|<option>RELATED</option>|<option>INVALID</option>}</term>
 
@@ -224,9 +205,9 @@
 
               <listitem>
                 <para>Added in Shorewall 4.6.4. When used with
-                <option>builtin</option>, indicates that the built-in action
-                is termiating (i.e., if the action is jumped to, the next rule
-                in the chain is not evaluated).</para>
+                <replaceable>builtin</replaceable>, indicates that the
+                built-in action is termiating (i.e., if the action is jumped
+                to, the next rule in the chain is not evaluated).</para>
               </listitem>
             </varlistentry>
           </variablelist>

Shorewall/manpages/shorewall-interfaces.xml

@@ -303,12 +303,6 @@ loc     eth2            -</programlisting>
                 <para>Designates the interface as a bridge. Beginning with
                 Shorewall 4.4.7, setting this option also sets
                 <option>routeback</option>.</para>
-
-                <note>
-                  <para>If you have a bridge that you don't intend to define
-                  bport zones on, then it is best to omit this option and
-                  simply specify <option>routeback</option>.</para>
-                </note>
               </listitem>
             </varlistentry>
 
@@ -768,13 +762,6 @@ loc     eth2            -</programlisting>
                     </listitem>
                   </itemizedlist>
                 </note>
-
-                <para>Beginning with Shorewall 5.1.1, when
-                <option>routefilter</option> is set to a non-zero value, the
-                <option>logmartians</option> option is also implicitly set. If
-                you actually want route filtering without logging, then you
-                must also specify <option>logmartians=0</option> after
-                <option>routefilter</option>.</para>
               </listitem>
             </varlistentry>
 

Shorewall/manpages/shorewall-mangle.xml

@@ -864,7 +864,7 @@ Normal-Service       =&gt; 0x00</programlisting>
                 on the firewall and whose source IP address matches one of the
                 listed addresses and does not match any address listed in the
                 <replaceable>exclusion</replaceable>. May not be used with a
-                chain qualifier (:P, :F, etc.) in the ACTION column.</para>
+                chain qualifier (:P, :F, etc.) in the ACTION column. </para>
               </listitem>
             </varlistentry>
 
@@ -1028,16 +1028,15 @@ Normal-Service       =&gt; 0x00</programlisting>
       <varlistentry>
         <term><emphasis role="bold">PROTO</emphasis> - {<emphasis
         role="bold">-</emphasis>|<emphasis
-        role="bold">{tcp:[!]syn</emphasis>|<emphasis
+        role="bold">{tcp:syn</emphasis>|<emphasis
         role="bold">ipp2p</emphasis>|<emphasis
         role="bold">ipp2p:udp</emphasis>|<emphasis
         role="bold">ipp2p:all</emphasis>|<emphasis>protocol-number</emphasis>|<emphasis>protocol-name</emphasis>|<emphasis
         role="bold">all}[,...]}</emphasis></term>
 
         <listitem>
-          <para>See <ulink
-          url="shorewall-rules.html">shorewall-rules(5)</ulink> for
-          details.</para>
+          <para>Protocol - <emphasis role="bold">ipp2p</emphasis> requires
+          ipp2p match support in your kernel and iptables.</para>
 
           <para>Beginning with Shorewall 4.5.12, this column can accept a
           comma-separated list of protocols.</para>

Shorewall/manpages/shorewall-policy.xml

@@ -115,12 +115,11 @@
         role="bold">ACCEPT</emphasis>|<emphasis
         role="bold">DROP</emphasis>|<emphasis
         role="bold">REJECT</emphasis>|<emphasis
-        role="bold">BLACKLIST</emphasis>|<emphasis
         role="bold">CONTINUE</emphasis>|<emphasis
         role="bold">QUEUE</emphasis>|<emphasis
         role="bold">NFQUEUE</emphasis>[(<emphasis>queuenumber1</emphasis>[:<replaceable>queuenumber2</replaceable>])]|<emphasis
         role="bold">NONE</emphasis>}[<emphasis
-        role="bold">:</emphasis>{[+]<emphasis>policy-action</emphasis>[:level][,...]|<emphasis
+        role="bold">:</emphasis>{<emphasis>default-action-or-macro</emphasis>[:level]|<emphasis
         role="bold">None</emphasis>}]</term>
 
         <listitem>
@@ -138,9 +137,8 @@
             </listitem>
 
             <listitem>
-              <para>The name of an action with optional parameters enclosed in
-              parentheses. The action will be invoked before the policy is
-              enforced.</para>
+              <para>The name of an action. The action will be invoked before
+              the policy is enforced.</para>
             </listitem>
           </orderedlist>
 
@@ -151,16 +149,7 @@
           applied to each rule in the action or body that does not already
           have a log level.</para>
 
-          <para>Beginning with Shorewall 5.1.2, multiple
-          <replaceable>action</replaceable>[:<replaceable>level</replaceable>]
-          specification may be listeded, separated by commas. The actions are
-          invoked in the order listed. Also beginning with Shorewall 5.1.2,
-          the policy-action list can be prefixed with a plus sign ("+")
-          indicating that the listed actions are in addition to those listed
-          in the related _DEFAULT setting in <ulink
-          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
-
-          <para>Possible policies are:</para>
+          <para>Possible actions are:</para>
 
           <variablelist>
             <varlistentry>
@@ -188,19 +177,6 @@
               </listitem>
             </varlistentry>
 
-            <varlistentry>
-              <term><emphasis role="bold">BLACKLIST</emphasis></term>
-
-              <listitem>
-                <para>Added in Shorewall 5.1.1 and requires that the
-                DYNAMIC_BLACKLIST setting in <ulink
-                url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
-                specifies ipset-based dynamic blacklisting. The SOURCE IP
-                address is added to the blacklist ipset and the connection
-                request is ignored.</para>
-              </listitem>
-            </varlistentry>
-
             <varlistentry>
               <term><emphasis role="bold">QUEUE</emphasis></term>
 
@@ -259,7 +235,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">LOGLEVEL</emphasis> (loglevel) -
+        <term><emphasis role="bold">LOG LEVEL</emphasis> (loglevel) -
         [<emphasis>log-level</emphasis>|<emphasis
         role="bold">ULOG|NFLOG</emphasis>]</term>
 
@@ -283,7 +259,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">RATE</emphasis> (rate) -
+        <term><emphasis role="bold">BURST:LIMIT</emphasis> (limit) -
         [-|<replaceable>limit</replaceable>]</term>
 
         <listitem>

Shorewall/manpages/shorewall-providers.xml

@@ -208,16 +208,6 @@
                 <option>balance=</option><replaceable>weight</replaceable>
                 where <replaceable>weight</replaceable> is the weight of the
                 route out of this interface.</para>
-
-                <para>Prior to Shorewall 5.1.1, when USE_DEFAULT_RT=Yes,
-                <option>balance=1</option> is assumed unless the
-                <option>fallback</option>, <option>loose</option>,
-                <option>load</option> or <option>tproxy</option> option is
-                specified. Beginning with Shorewall 5.1.1, when
-                BALANCE_PROVIDERS=Yes, <option>balance=1</option> is assumed
-                unless the <option>fallback</option>, <option>loose</option>,
-                <option>load</option> or <option>tproxy</option> option is
-                specified.</para>
               </listitem>
             </varlistentry>
 

Shorewall/manpages/shorewall-rtrules.xml

@@ -129,17 +129,6 @@
           <para>Beginning with Shorewall 5.0.2, the priority may be followed
           optionally by an exclaimation mark ("!"). This causes the rule to
           remain in place if the interface is disabled.</para>
-
-          <caution>
-            <para>Be careful when using rules of the same PRIORITY as some
-            unexpected behavior can occur when multiple rules have the same
-            SOURCE. For example, in the following rules, the second rule
-            overwrites the first unless the priority in the second is changed
-            to 19001 or higher:</para>
-
-            <programlisting>10.10.0.0/24    192.168.5.6 provider1 19000
-10.10.0.0/24    -           provider2 19000</programlisting>
-          </caution>
         </listitem>
       </varlistentry>
 

Shorewall/manpages/shorewall-rules.xml

@@ -66,7 +66,7 @@
           this section.</para>
 
           <para>The only ACTIONs allowed in this section are ACCEPT, DROP,
-          REJECT, LOG, NFQUEUE and QUEUE</para>
+          REJECT, LOG and QUEUE</para>
 
           <para>There is an implicit ACCEPT rule inserted at the end of this
           section.</para>
@@ -81,7 +81,7 @@
           section.</para>
 
           <para>The only ACTIONs allowed in this section are ACCEPT, DROP,
-          REJECT, LOG, NFQUEUE and QUEUE</para>
+          REJECT, LOG and QUEUE</para>
 
           <para>There is an implicit rule added at the end of this section
           that invokes the RELATED_DISPOSITION (<ulink
@@ -97,7 +97,7 @@
           processed by rules in this section.</para>
 
           <para>The only Actions allowed in this section are ACCEPT, DROP,
-          REJECT, LOG, NFQUEUE and QUEUE.</para>
+          REJECT, LOG and QUEUE.</para>
 
           <para>There is an implicit rule added at the end of this section
           that invokes the INVALID_DISPOSITION (<ulink
@@ -113,7 +113,7 @@
           processed by rules in this section.</para>
 
           <para>The only Actions allowed in this section are ACCEPT, DROP,
-          REJECT, LOG, NFQUEUE and QUEUE.</para>
+          REJECT, LOG and QUEUE.</para>
 
           <para>There is an implicit rule added at the end of this section
           that invokes the UNTRACKED_DISPOSITION (<ulink
@@ -138,8 +138,9 @@
       comfortable with the differences between the various connection tracking
       states, then it is suggested that you omit the <emphasis
       role="bold">ESTABLISHED</emphasis> and <emphasis
-      role="bold">RELATED</emphasis> sections and place all of your rules in
-      the NEW section (That's after the line that reads ?SECTION NEW').</para>
+      role="bold">RELATED</emphasis> sections and place all of your
+      non-blacklisting rules in the NEW section (That's after the line that
+      reads ?SECTION NEW').</para>
     </note>
 
     <warning>
@@ -729,9 +730,7 @@
                   <member><option>icmp-admin-prohibited</option></member>
 
                   <member><option>icmp-tcp-reset</option> (the PROTO column
-                  must specify TCP). Beginning with Shorewall 5.1.3, this
-                  option may also be specified as
-                  <option>tcp-reset</option>.</member>
+                  must specify TCP)</member>
                 </simplelist>
               </listitem>
             </varlistentry>
@@ -1594,7 +1593,7 @@
       <varlistentry>
         <term><emphasis role="bold">PROTO</emphasis>- {<emphasis
         role="bold">-</emphasis>|<emphasis
-        role="bold">tcp:[!]syn</emphasis>|<emphasis
+        role="bold">tcp:syn</emphasis>|<emphasis
         role="bold">ipp2p</emphasis>|<emphasis
         role="bold">ipp2p:udp</emphasis>|<emphasis
         role="bold">ipp2p:all</emphasis>|<emphasis>protocol-number</emphasis>|<emphasis>protocol-name</emphasis>|<emphasis
@@ -1605,10 +1604,7 @@
           requires ipp2p match support in your kernel and iptables. <emphasis
           role="bold">tcp:syn</emphasis> implies <emphasis
           role="bold">tcp</emphasis> plus the SYN flag must be set and the
-          RST, ACK and FIN flags must be reset. Beginning with Shorewall
-          5.1.3, you may also specify <emphasis
-          role="bold">tcp:!syn</emphasis>, which matches if SYN is not set or
-          if RST, ACK or FIN is set.</para>
+          RST,ACK and FIN flags must be reset.</para>
 
           <para>Beginning with Shorewall 4.4.19, this column can contain a
           comma-separated list of protocol-numbers and/or protocol

Shorewall/manpages/shorewall-secmarks.xml

@@ -229,9 +229,8 @@
         role="bold">all}[,...]</emphasis></term>
 
         <listitem>
-          <para> See <ulink
-          url="shorewall-rules.html">shorewall-rules(5)</ulink> for
-          details.</para>
+          <para>Protocol - <emphasis role="bold">ipp2p</emphasis> requires
+          ipp2p match support in your kernel and iptables.</para>
 
           <para>Beginning with Shorewall 4.5.12, this column can accept a
           comma-separated list of protocols.</para>

Shorewall/manpages/shorewall-snat.xml

@@ -256,9 +256,8 @@
 
         <listitem>
           <para>If you wish to restrict this entry to a particular protocol
-          then enter the protocol name (from protocols(5)) or number here. See
-          <ulink url="shorewall-rules.html">shorewall-rules(5)</ulink> for
-          details.</para>
+          then enter the protocol name (from protocols(5)) or number
+          here.</para>
 
           <para>Beginning with Shorewall 4.5.12, this column can accept a
           comma-separated list of protocols.</para>

Shorewall/manpages/shorewall.conf.xml

@@ -109,7 +109,7 @@
     <variablelist>
       <varlistentry>
         <term><emphasis
-        role="bold">ACCEPT_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>][,...]|<emphasis
+        role="bold">ACCEPT_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
         role="bold">none</emphasis>}</term>
 
         <listitem>
@@ -119,7 +119,7 @@
 
       <varlistentry>
         <term><emphasis
-        role="bold">BLACKLIST_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>][,...]|<emphasis
+        role="bold">DROP_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
         role="bold">none</emphasis>}</term>
 
         <listitem>
@@ -129,7 +129,7 @@
 
       <varlistentry>
         <term><emphasis
-        role="bold">DROP_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>][,...]|<emphasis
+        role="bold">NFQUEUE_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
         role="bold">none</emphasis>}</term>
 
         <listitem>
@@ -139,7 +139,7 @@
 
       <varlistentry>
         <term><emphasis
-        role="bold">NFQUEUE_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>][,...]|<emphasis
+        role="bold">QUEUE_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
         role="bold">none</emphasis>}</term>
 
         <listitem>
@@ -149,23 +149,13 @@
 
       <varlistentry>
         <term><emphasis
-        role="bold">QUEUE_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>][,...]|<emphasis
+        role="bold">REJECT_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
         role="bold">none</emphasis>}</term>
 
         <listitem>
-          <para/>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis
-        role="bold">REJECT_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>][,...]|<emphasis
-        role="bold">none</emphasis>}</term>
-
-        <listitem>
-          <para>In earlier Shorewall versions, a "<firstterm>default
-          action</firstterm>" for DROP and REJECT policies was specified in
-          the file /usr/share/shorewall/actions.std.</para>
+          <para>In earlier Shorewall versions, a "default action" for DROP and
+          REJECT policies was specified in the file
+          /usr/share/shorewall/actions.std.</para>
 
           <para>In Shorewall 4.4.0, the DROP_DEFAULT, REJECT_DEFAULT,
           ACCEPT_DEFAULT, QUEUE_DEFAULT and NFQUEUE_DEFAULT options were
@@ -179,38 +169,20 @@
 
           <para>The value applied to these may be:</para>
 
-          <simplelist>
-            <member>a) The name of an <replaceable>action</replaceable>. The
-            name may optionally be followed by a comma-separated list of
-            parameters enclosed in parentheses if the specified action accepts
-            parameters (e.g., 'Drop(audit)').</member>
-
-            <member>c) <emphasis role="bold">None</emphasis> or <emphasis
-            role="bold">none</emphasis></member>
-          </simplelist>
-
-          <para>Prior to Shorewall 5.1.2, the default values are:</para>
+          <para>The default values are:</para>
 
           <simplelist>
             <member>DROP_DEFAULT="Drop"</member>
 
             <member>REJECT_DEFAULT="Reject"</member>
 
-            <member>BLACKLIST_DEFAULT="Drop" (added in Shorewall
-            5.1.1)</member>
-
             <member>ACCEPT_DEFAULT="none"</member>
 
             <member>QUEUE_DEFAULT="none"</member>
 
-            <member>NFQUEUE_DEFAULT="none"</member>
+            <member>NFQUEUE_DEFAULT="None"</member>
           </simplelist>
 
-          <para>Beginning with Shorewall 5.1.2, the default value is 'none'
-          for all of these. Note that the sample configuration files do,
-          however, provide settings for DROP_DEFAULT, BLACKLIST_DEFAULT and
-          REJECT_DEFAULT.</para>
-
           <para>If you set the value of either option to "None" then no
           default action will be used and the default action or macro must be
           specified in <ulink
@@ -225,10 +197,6 @@
           <replaceable>level</replaceable>. The level will be applied to each
           rule in the action or body that does not already have a log
           level.</para>
-
-          <para>Beginning with Shorewall 5.1.2, multiple
-          <replaceable>action</replaceable>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]
-          specifications may be listed, separated by commas.</para>
         </listitem>
       </varlistentry>
 
@@ -475,24 +443,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term><emphasis role="bold">BALANCE_PROVIDERS=</emphasis>[<emphasis
-        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
-
-        <listitem>
-          <para>Added in Shorewall 5.1.1. When USE_DEFAULT_RT=Yes, this option
-          determines whether the <option>balance</option> provider option (see
-          <ulink
-          url="shorewall-providers.html">shorewall-providers(5)</ulink>) is
-          the default. When BALANCE_PROVIDERS=Yes, then the
-          <option>balance</option> option is assumed unless the
-          <option>fallback</option>, <option>loose</option>,
-          <option>load</option> or <option>tproxy</option> option is
-          specified. If this option is not set or is set to the empty value,
-          then the default value is the value of USE_DEFAULT_RT.</para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term><emphasis role="bold">BASIC_FILTERS=</emphasis>[<emphasis
         role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
@@ -1356,20 +1306,6 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term><emphasis
-        role="bold">LOG_LEVEL=</emphasis><emphasis>log-level</emphasis>[:<replaceable>log-tag</replaceable>]</term>
-
-        <listitem>
-          <para>Added in Shorewall 5.1.2. Beginning with that release, the
-          sample configurations use this as the default log level and changing
-          it will change all packet logging done by the configuration. In any
-          configuration file (except <ulink
-          url="shorewall-params.html">shorewall-params(5)</ulink>), $LOG_LEVEL
-          will expand to this value.</para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term><emphasis role="bold">LOG_MARTIANS=</emphasis>[<emphasis
         role="bold">Yes</emphasis>|<emphasis
@@ -2895,12 +2831,8 @@ INLINE          -       -       -       ;; -j REJECT
             </listitem>
 
             <listitem>
-              <para>If running Shorewall 5.1.0 or earlier or if
-              BALANCE_PROVIDERS=Yes (Shorewall 5.1.1 or later), then the
-              <emphasis role="bold">balance</emphasis> provider option is
-              assumed unless the <option>fallback</option>,
-              <option>loose</option>, <option>load</option> or
-              <option>tproxy</option> option is specified.</para>
+              <para><emphasis role="bold">balance</emphasis> is assumed unless
+              <emphasis role="bold">loose</emphasis> is specified.</para>
             </listitem>
 
             <listitem>

Shorewall/shorewall.service.debian

@@ -16,7 +16,7 @@ RemainAfterExit=yes
 EnvironmentFile=-/etc/default/shorewall
 StandardOutput=syslog
 ExecStart=/sbin/shorewall $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall $OPTIONS clear
+ExecStop=/sbin/shorewall $OPTIONS stop
 ExecReload=/sbin/shorewall $OPTIONS reload $RELOADOPTIONS
 
 [Install]

Shorewall/uninstall.sh

@@ -26,7 +26,9 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx #The Build script inserts the actual version
+PRODUCT=shorewall
+Product=Shorewall
 
 usage() # $1 = exit status
 {
@@ -39,27 +41,51 @@ usage() # $1 = exit status
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+remove_file() # $1 = file to restore
+{
+    if [ -f $1 -o -L $1 ] ; then
+	rm -f $1
+	echo "$1 Removed"
+    fi
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-if [ -f shorewall.service ]; then
-    PRODUCT=shorewall
-    Product=Shorewall
-else
-    PRODUCT=shorewall6
-    Product=Shorewall6
-fi
-
-#
-# Source common functions
-#
-. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
-#
-# Parse the run line
-#
 finished=0
 configure=1
 
@@ -76,7 +102,7 @@ while [ $finished -eq 0 ]; do
 			usage 0
 			;;
 		    v)
-			echo "$Product Firewall Uninstaller Version $VERSION"
+			echo "$Product Firewall Installer Version $VERSION"
 			exit 0
 			;;
 		    n*)
@@ -97,16 +123,13 @@ while [ $finished -eq 0 ]; do
     esac
 done
 
-#
-# Read the RC file
-#
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
-        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+	. ~/.shorewallrc || exit 1
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -116,53 +139,52 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
 
-if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
-    INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
+if [ -f ${SHAREDIR}/shorewall/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall/version)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
+	echo "WARNING: Shorewall Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: $Product Version $VERSION is not installed"
+    echo "WARNING: Shorewall Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling $Product $VERSION"
+
+echo "Uninstalling shorewall $VERSION"
 
 [ -n "$SANDBOX" ] && configure=0
 
 if [ $configure -eq 1 ]; then
     if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall-lite ]; then
-	${SBINDIR}/$PRODUCT clear
-    elif qt ip6tables -L shorewall6 -n && [ ! -f ${SBINDIR}/shorewall6-lite ]; then
-	${SBINDIR}/$PRODUCT clear
+	shorewall clear
     fi
 fi
 
-remove_file ${SBINDIR}/$PRODUCT
+rm -f ${SBINDIR}/shorewall
 
-if [ -L ${SHAREDIR}/$PRODUCT/init ]; then
-    FIREWALL=$(readlink -m -q ${SHAREDIR}/$PRODUCT/init)
+if [ -L ${SHAREDIR}/shorewall/init ]; then
+    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall/init)
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
 fi
 
 if [ -f "$FIREWALL" ]; then
     if [ $configure -eq 1 ]; then
-	if mywhich insserv ; then
+	if mywhich updaterc.d ; then
+	    updaterc.d ${PRODUCT} remove
+	elif mywhich insserv ; then
             insserv -r $FIREWALL
-	elif mywhich update-rc.d ; then
-	    update-rc.d ${PRODUCT} remove
 	elif mywhich chkconfig ; then
 	    chkconfig --del $(basename $FIREWALL)
 	fi
@@ -171,56 +193,51 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
-
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
 if [ -n "$SERVICEDIR" ]; then
-    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
-    remove_file $SERVICEDIR/${PRODUCT}.service
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
+    rm -f $SERVICEDIR/shorewall.service
 fi
 
-remove_file ${SHAREDIR}/$PRODUCT/version
-remove_directory ${CONFDIR}/$PRODUCT
+rm -rf ${SHAREDIR}/shorewall/version
+rm -rf ${CONFDIR}/shorewall
 
 if [ -n "$SYSCONFDIR" ]; then
-    [ -n "$SYSCONFFILE" ] && remove_file ${SYSCONFDIR}/${PRODUCT}
+    [ -n "$SYSCONFFILE" ] && rm -f ${SYSCONFDIR}/${PRODUCT}
 fi
 
-remove_directory ${VARDIR}
-[ ${LIBEXECDIR} = ${SHAREDIR} ] || remove_directory ${LIBEXECDIR}/$PRODUCT
-remove_directory ${SHAREDIR}/$PRODUCT/configfiles
-remove_file_with_wildcard  ${SHAREDIR}/$PRODUCT/module\*
-remove_file  ${SHAREDIR}/$PRODUCT/helpers
-remove_file_with_wildcard  ${SHAREDIR}/$PRODUCT/action\*
-remove_file_with_wildcard  ${SHAREDIR}/$PRODUCT/macro.\*
+rm -rf ${VARDIR}/shorewall
+rm -rf ${PERLLIBDIR}/Shorewall/*
+[ ${LIBEXECDIR} = ${SHAREDIR} ] || rm -rf ${LIBEXECDIR}/shorewall
+rm -rf ${SHAREDIR}/shorewall/configfiles/
+rm -rf ${SHAREDIR}/shorewall/Samples/
+rm -rf ${SHAREDIR}/shorewall/Shorewall/
+rm -f  ${SHAREDIR}/shorewall/lib.cli-std
+rm -f  ${SHAREDIR}/shorewall/lib.runtime
+rm -f  ${SHAREDIR}/shorewall/compiler.pl
+rm -f  ${SHAREDIR}/shorewall/prog.*
+rm -f  ${SHAREDIR}/shorewall/module*
+rm -f  ${SHAREDIR}/shorewall/helpers
+rm -f  ${SHAREDIR}/shorewall/action*
+rm -f  ${SHAREDIR}/shorewall/macro.*
+rm -f  ${SHAREDIR}/shorewall/init
 
-if [ $PRODUCT = shorewall ]; then
-    remove_file_with_wildcard ${PERLLIBDIR}/$Product/\*
-    remove_directory ${SHAREDIR}/$PRODUCT/Samples
-    remove_directory ${SHAREDIR}/$PRODUCT/$Product
-    remove_file  ${SHAREDIR}/$PRODUCT/lib.cli-std
-    remove_file  ${SHAREDIR}/$PRODUCT/lib.runtime
-    remove_file  ${SHAREDIR}/$PRODUCT/compiler.pl
-    remove_file_with_wildcard  ${SHAREDIR}/$PRODUCT/prog.\*
-    remove_file  ${SHAREDIR}/$PRODUCT/init
-else
-    remove_directory ${SHAREDIR}/$PRODUCT
-fi
-
-for f in ${MANDIR}/man5/${PRODUCT}* ${MANDIR}/man8/${PRODUCT}*; do
+for f in ${MANDIR}/man5/shorewall* ${MANDIR}/man8/shorewall*; do
     case $f in
-	shorewall[6]-lite*)
+	shorewall6*|shorewall-lite*)
 	    ;;
 	*)
-	    remove_file $f
+	    rm -f $f
 	    ;;
     esac
 done
 
-remove_file  ${CONFDIR}/logrotate.d/$PRODUCT
+rm -f  ${CONFDIR}/logrotate.d/shorewall
+
+[ -n "$SYSTEMD" ] && rm -f  ${SYSTEMD}/shorewall.service
+
+echo "Shorewall Uninstalled"
 
-[ -n "$SYSTEMD" ] && remove_file ${SYSTEMD}/${PRODUCT}.service
 
-#
-# Report Success
-#
-echo "$Product $VERSION Uninstalled"

Shorewall6-lite/default.debian

@@ -1,5 +1,5 @@
 # prevent startup with default configuration
-# set the following variable to 1 in order to allow Shorewall6-lite to start
+# set the following varible to 1 in order to allow Shorewall6-lite to start
 
 startup=0
 
@@ -16,7 +16,7 @@ startup=0
 #    wait_interface=
 
 #
-# Global start/restart/reload/stop options
+# Startup options
 #
 OPTIONS=""
 
@@ -30,16 +30,6 @@ STARTOPTIONS=""
 #
 RESTARTOPTIONS=""
 
-#
-# Reload options
-#
-RELOADOPTIONS=""
-
-#
-# Stop options
-#
-STOPOPTIONS=""
-
 #
 # Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf
 #

Shorewall6-lite/default.debian.systemd

@@ -1,26 +0,0 @@
-#
-# Global start/restart/reload/stop options
-#
-OPTIONS=""
-
-#
-# Start options
-#
-STARTOPTIONS=""
-
-#
-# Restart options
-#
-RESTARTOPTIONS=""
-
-#
-# Reload options
-#
-RELOADOPTIONS=""
-
-#
-# Stop options
-#
-STOPOPTIONS=""
-
-# EOF

Shorewall6-lite/shorewall6-lite.service.debian

@@ -15,7 +15,7 @@ RemainAfterExit=yes
 EnvironmentFile=-/etc/default/shorewall6-lite
 StandardOutput=syslog
 ExecStart=/sbin/shorewall6-lite $OPTIONS start
-ExecStop=/sbin/shorewall6-lite $OPTIONS clear
+ExecStop=/sbin/shorewall6-lite $OPTIONS stop
 ExecReload=/sbin/shorewall6-lite $OPTIONS reload
 
 [Install]

Shorewall6-lite/uninstall.sh

@@ -0,0 +1,221 @@
+#!/bin/sh
+#
+# Script to back uninstall Shoreline Firewall 6 Lite
+#
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#
+#       Shorewall documentation is available at http://shorewall.sourceforge.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#    Usage:
+#
+#       You may only use this script to uninstall the version
+#       shown below. Simply run this script to remove Shorewall Firewall
+
+VERSION=xxx  #The Build script inserts the actual version
+PRODUCT=shorewall6-lite
+Product="Shorewall6 Lite"
+
+usage() # $1 = exit status
+{
+    ME=$(basename $0)
+    echo "usage: $ME [ <shorewallrc file> ]"
+    exit $1
+}
+
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+remove_file() # $1 = file to restore
+{
+    if [ -f $1 -o -L $1 ] ; then
+	rm -f $1
+	echo "$1 Removed"
+    fi
+}
+
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
+#
+# Read the RC file
+#
+if [ $# -eq 0 ]; then
+    if [ -f ./shorewallrc ]; then
+	. ./shorewallrc
+    elif [ -f ~/.shorewallrc ]; then
+	. ~/.shorewallrc || exit 1
+    elif [ -f /usr/share/shorewall/shorewallrc ]; then
+	. /usr/share/shorewall/shorewallrc
+    else
+	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
+    fi
+elif [ $# -eq 1 ]; then
+    file=$1
+    case $file in
+	/*|.*)
+	    ;;
+	*)
+	    file=./$file
+	    ;;
+    esac
+
+    . $file
+else
+    usage 1
+fi
+
+if [ -f ${SHAREDIR}/shorewall6-lite/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall6-lite/version)"
+    if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
+	echo "WARNING: Shorewall6 Lite Version $INSTALLED_VERSION is installed"
+	echo "         and this is the $VERSION uninstaller."
+	VERSION="$INSTALLED_VERSION"
+    fi
+else
+    echo "WARNING: Shorewall6 Lite Version $VERSION is not installed"
+    VERSION=""
+fi
+
+echo "Uninstalling Shorewall6 Lite $VERSION"
+
+[ -n "$SANDBOX" ] && configure=0
+
+if [ $configure -eq 1 ]; then
+    if qt ip6tables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall6 ]; then
+	${SBINDIR}/shorewall6-lite clear
+    fi
+fi
+
+if [ -f ${SHAREDIR}/shorewall6-lite/init ]; then
+    if [ $HOST = openwrt ]; then
+	if [ $configure -eq 1 ] && /etc/init.d/shorewall6-lite enabled; then
+	    /etc/init.d/shorewall6-lite disable
+	fi
+	
+	FIREWALL=$(readlink ${SHAREDIR}/shorewall6-lite/init)
+    else
+	FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall6-lite/init)
+    fi
+elif [ -n "$INITFILE" ]; then
+    FIREWALL=${INITDIR}/${INITFILE}
+fi
+
+if [ -f "$FIREWALL" ]; then
+    if [ $configure -eq 1 ]; then
+	if mywhich updaterc.d ; then
+	    updaterc.d shorewall6-lite remove
+	elif mywhich insserv ; then
+            insserv -r $FIREWALL
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $FIREWALL)
+	elif mywhich systemctl ; then
+	    systemctl disable shorewall6-lite
+	fi
+    fi
+
+    remove_file $FIREWALL
+fi
+
+[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
+
+if [ -n "$SERVICEDIR" ]; then
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
+    rm -f $SERVICEDIR/shorewall6-lite.service
+fi
+
+rm -f ${SBINDIR}/shorewall6-lite
+rm -rf ${CONFDIR}/shorewall6-lite
+rm -rf ${VARDIR}
+rm -rf ${SHAREDIR}/shorewall6-lite
+rm -rf ${LIBEXECDIR}/shorewall6-lite
+rm -f  ${CONFDIR}/logrotate.d/shorewall6-lite
+rm -f  ${SYSCONFDIR}/shorewall6-lite
+
+if [ -n "${MANDIR}" ]; then
+    rm -f ${MANDIR}/man5/shorewall6-lite*
+    rm -f ${MANDIR}/man8/shorewall6-lite*
+fi
+
+echo "Shorewall6 Lite Uninstalled"

Shorewall6/Actions/action.A_AllowICMPs

@@ -0,0 +1,38 @@
+#
+# Shorewall6 -- /usr/share/shorewall6/action.A_AllowICMPs
+#
+# This action A_ACCEPTs needed ICMP types
+#
+###############################################################################
+#ACTION		SOURCE		DEST	PROTO		DPORT
+
+?comment Needed ICMP types (RFC4890)
+
+A_ACCEPT	-		-	ipv6-icmp	destination-unreachable
+A_ACCEPT	-		-	ipv6-icmp	packet-too-big
+A_ACCEPT	-		-	ipv6-icmp	time-exceeded
+A_ACCEPT	-		-	ipv6-icmp	parameter-problem
+
+# The following should have a ttl of 255 and must be allowed to transit a bridge
+A_ACCEPT	-		-	ipv6-icmp	router-solicitation
+A_ACCEPT	-		-	ipv6-icmp	router-advertisement
+A_ACCEPT	-		-	ipv6-icmp	neighbour-solicitation
+A_ACCEPT	-		-	ipv6-icmp	neighbour-advertisement
+A_ACCEPT	-		-	ipv6-icmp	137	# Redirect
+A_ACCEPT	-		-	ipv6-icmp	141	# Inverse neighbour discovery solicitation
+A_ACCEPT	-		-	ipv6-icmp	142	# Inverse neighbour discovery advertisement
+
+# The following should have a link local source address and must be allowed to transit a bridge
+A_ACCEPT	fe80::/10	-	ipv6-icmp	130	# Listener query
+A_ACCEPT	fe80::/10	-	ipv6-icmp	131	# Listener report
+A_ACCEPT	fe80::/10	-	ipv6-icmp	132	# Listener done
+A_ACCEPT	fe80::/10	-	ipv6-icmp	143	# Listener report v2
+
+# The following should be received with a ttl of 255 and must be allowed to transit a bridge
+A_ACCEPT	-		-	ipv6-icmp	148	# Certificate path solicitation
+A_ACCEPT	-		-	ipv6-icmp	149	# Certificate path advertisement
+
+# The following should have a link local source address and a ttl of 1 and must be allowed to transit abridge
+A_ACCEPT	fe80::/10	-	ipv6-icmp	151	# Multicast router advertisement
+A_ACCEPT	fe80::/10	-	ipv6-icmp	152	# Multicast router solicitation
+A_ACCEPT	fe80::/10	-	ipv6-icmp	153	# Multicast router termination

Shorewall6/Actions/action.AllowICMPs

@@ -0,0 +1,40 @@
+#
+# Shorewall6 -- /usr/share/shorewall6/action.AllowICMPs
+#
+# This action ACCEPTs needed ICMP types
+#
+###############################################################################
+#ACTION	SOURCE		DEST	PROTO		DPORT
+
+DEFAULTS ACCEPT
+
+?COMMENT Needed ICMP types (RFC4890)
+
+$1	-		-	ipv6-icmp	destination-unreachable
+$1	-		-	ipv6-icmp	packet-too-big
+$1	-		-	ipv6-icmp	time-exceeded
+$1	-		-	ipv6-icmp	parameter-problem
+
+# The following should have a ttl of 255 and must be allowed to transit a bridge
+$1	-		-	ipv6-icmp	router-solicitation
+$1	-		-	ipv6-icmp	router-advertisement
+$1	-		-	ipv6-icmp	neighbour-solicitation
+$1	-		-	ipv6-icmp	neighbour-advertisement
+$1	-		-	ipv6-icmp	137	# Redirect
+$1	-		-	ipv6-icmp	141	# Inverse neighbour discovery solicitation
+$1	-		-	ipv6-icmp	142	# Inverse neighbour discovery advertisement
+
+# The following should have a link local source address and must be allowed to transit a bridge
+$1	fe80::/10	-	ipv6-icmp	130	# Listener query
+$1	fe80::/10	-	ipv6-icmp	131	# Listener report
+$1	fe80::/10	-	ipv6-icmp	132	# Listener done
+$1	fe80::/10	-	ipv6-icmp	143	# Listener report v2
+
+# The following should be received with a ttl of 255 and must be allowed to transit a bridge
+$1	-		-	ipv6-icmp	148	# Certificate path solicitation
+$1	-		-	ipv6-icmp	149	# Certificate path advertisement
+
+# The following should have a link local source address and a ttl of 1 and must be allowed to transit abridge
+$1	fe80::/10	-	ipv6-icmp	151	# Multicast router advertisement
+$1	fe80::/10	-	ipv6-icmp	152	# Multicast router solicitation
+$1	fe80::/10	-	ipv6-icmp	153	# Multicast router termination

Shorewall6/Actions/action.Broadcast

@@ -0,0 +1,69 @@
+#
+# Shorewall6 -- /usr/share/shorewall6/action.Broadcast
+#
+# Multicast/Anycast IPv6 Action
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Broadcast[([<action>|-[,{audit|-}])]
+#
+# Default action is DROP
+#
+###############################################################################
+
+DEFAULTS DROP,-
+
+?begin perl;
+
+use Shorewall::IPAddrs;
+use Shorewall::Config;
+use Shorewall::Chains;
+
+my $chainref           = get_action_chain;
+my ( $action, $audit ) = get_action_params( 2 );
+my ( $level, $tag )    = get_action_logging;
+my $target             = require_audit ( $action , $audit );
+
+fatal_error "Invalid parameter to action Broadcast"   if supplied $audit && $audit ne 'audit';
+
+if ( have_capability( 'ADDRTYPE' ) ) {
+    if ( $level ne '' ) {
+	log_rule_limit $level, $chainref, 'dropBcast' , $action, '', $tag, 'add', ' -m addrtype --dst-type MULTICAST ';
+	log_rule_limit $level, $chainref, 'dropBcast' , $action, '', $tag, 'add', ' -m addrtype --dst-type ANYCAST ';
+    }
+
+    add_jump $chainref, $target, 0, '-m addrtype --dst-type BROADCAST ';
+    add_jump $chainref, $target, 0, '-m addrtype --dst-type MULTICAST ';
+    add_jump $chainref, $target, 0, '-m addrtype --dst-type ANYCAST ';
+} else {
+    add_commands $chainref, 'for address in $ALL_ACASTS; do';
+    incr_cmd_level $chainref;
+    log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
+    add_jump $chainref, $target, 0, "-d \$address ";
+    decr_cmd_level $chainref;
+    add_commands $chainref, 'done';
+
+    log_rule_limit( $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', join( ' ', '-d', IPv6_MULTICAST . ' ' ) )  if $level ne '';
+    add_jump $chainref, $target, 0, join( ' ', '-d', IPv6_MULTICAST . ' ' );
+}
+
+1;
+
+?end perl;

Shorewall6/Samples6/Universal/params

@@ -1,13 +0,0 @@
-#
-# Shorewall - Sample Params File for universal configuration.
-# Copyright (C) 2006-2017 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------------------------------------
-# For information on entries in this file, type "man shorewall-params"
-######################################################################################################################################################################################################

Shorewall6/Samples6/Universal/policy

@@ -7,7 +7,8 @@
 # http://www.shorewall.net/manpages/shorewall-policy.html
 #
 ###############################################################################
-#SOURCE	DEST	POLICY		LOGLEVEL	RATE		CONNLIMIT
+#SOURCE	DEST	POLICY		LOG	LIMIT:		CONNLIMIT:
+#				LEVEL	BURST		MASK
 fw	net	ACCEPT
-net	all	DROP		$LOG_LEVEL
+net	all	DROP
 

Shorewall6/Samples6/Universal/shorewall6.conf

@@ -34,8 +34,6 @@ FIREWALL=
 #			       L O G G I N G
 ###############################################################################
 
-LOG_LEVEL="info"
-
 BLACKLIST_LOG_LEVEL=
 
 INVALID_LOG_LEVEL=
@@ -54,19 +52,19 @@ LOGLIMIT="s:1/sec:10"
 
 LOGTAGONLY=No
 
-MACLIST_LOG_LEVEL="$LOG_LEVEL"
+MACLIST_LOG_LEVEL=info
 
 RELATED_LOG_LEVEL=
 
-RPFILTER_LOG_LEVEL="$LOG_LEVEL"
+RPFILTER_LOG_LEVEL=info
 
-SFILTER_LOG_LEVEL="$LOG_LEVEL"
+SFILTER_LOG_LEVEL=info
 
-SMURF_LOG_LEVEL="$LOG_LEVEL"
+SMURF_LOG_LEVEL=info
 
 STARTUP_LOG=/var/log/shorewall6-init.log
 
-TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
+TCP_FLAGS_LOG_LEVEL=info
 
 UNTRACKED_LOG_LEVEL=
 
@@ -107,11 +105,10 @@ TC=
 ###############################################################################
 
 ACCEPT_DEFAULT="none"
-BLACKLIST_DEFAULT="AllowICMPs,Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
-DROP_DEFAULT="AllowICMPs,Broadcast(DROP),Multicast(DROP)"
+DROP_DEFAULT="Drop"
 NFQUEUE_DEFAULT="none"
 QUEUE_DEFAULT="none"
-REJECT_DEFAULT="AllowICMPs,Broadcast(DROP),Multicast(DROP)"
+REJECT_DEFAULT="Reject"
 
 ###############################################################################
 #                        R S H / R C P  C O M M A N D S
@@ -136,8 +133,6 @@ AUTOHELPERS=Yes
 
 AUTOMAKE=Yes
 
-BALANCE_PROVIDERS=No
-
 BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
@@ -188,8 +183,6 @@ MANGLE_ENABLED=Yes
 
 MARK_IN_FORWARD_CHAIN=No
 
-MINIUPNPD=No
-
 MODULE_SUFFIX="ko ko.xz"
 
 MUTEX_TIMEOUT=60
@@ -208,7 +201,7 @@ RESTORE_ROUTEMARKS=Yes
 
 SAVE_IPSETS=No
 
-TC_ENABLED=Shared
+TC_ENABLED=No
 
 TC_EXPERT=No