Delete superfluous semicolon.

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -190,7 +190,7 @@ for p in ${!params[@]}; do
 done
 
 echo '#'                                                                 > shorewallrc
-echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
+echo "# Created by Shorewall Core version $VERSION configure - " `date --utc --date="@${SOURCE_DATE_EPOCH:-$(date +%s)}"` >> shorewallrc
 echo "# rc file: $rcfile"                                               >> shorewallrc
 echo '#'                                                                >> shorewallrc
 

Shorewall-core/configure.pl

@@ -173,7 +173,12 @@ my $outfile;
 
 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
 
-printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+if ( $ENV{SOURCE_DATE_EPOCH} ) {
+    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s\n", VERSION, `date  --utc --date=\"\@$ENV{SOURCE_DATE_EPOCH}\"`;
+} else {
+    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+}
+
 print $outfile "# rc file: $rcfilename\n#\n";
 
 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;

Shorewall-core/lib.base

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.base
+# Shorewall 5.1 -- /usr/share/shorewall/lib.base
 #
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #

Shorewall-core/lib.cli

@@ -25,7 +25,7 @@
 # loaded after this one and replaces some of the functions declared here.
 #
 
-SHOREWALL_CAPVERSION=50100
+SHOREWALL_CAPVERSION=50106
 
 if [ -z "$g_basedir" ]; then
     #
@@ -1137,16 +1137,31 @@ show_a_macro() {
     cat ${directory}/macro.$1
 }
 #
-# Don't dump empty SPD entries
+# Don't dump empty SPD entries or entries from the other address family
 #
-spd_filter()
-{
-    awk \
-    'BEGIN            { skip=0; }; \
-    /^src/            { skip=0; }; \
-    /^src 0.0.0.0\/0/ { skip=1; }; \
-    /^src ::\/0/      { skip=1; }; \
-                      { if ( skip == 0 ) print; };'
+spd_filter() {
+    #
+    # af   = Address Family (4 or 6)
+    # afok = Address Family of entry matches af
+    # p    = print the contents of A (entry is not empty)
+    # i    = Number of lines stored in A
+    #
+    awk -v af=$g_family \
+	'function prnt(A,i,    j) { while ( j < i ) print A[j++]; };\
+\
+	 /^src / { if (p) prnt( A, i );\
+		   afok = 1;\
+		   p	= 0;\
+		   i	= 0;\
+		   if ( af == 4 )\
+		       { if ( /:/ )  afok = 0; }\
+		   else\
+		       { if ( /\./ ) afok = 0; }\
+		 };\
+		 { if ( afok ) A[i++] = $0; };\
+	 /tmpl/	 { p = afok; };\
+\
+	 END	 { if (p) prnt( A, i ); }'
 }
 #
 # Print a heading with leading and trailing black lines
@@ -1159,7 +1174,8 @@ heading() {
 
 show_ipsec() {
     heading "PFKEY SPD"
-    $IP -s xfrm policy | spd_filter
+    $IP -s -$g_family xfrm policy | spd_filter
+
     heading "PFKEY SAD"
     $IP -s -$g_family xfrm state | egrep -v '[[:space:]]+(auth-trunc|enc )' # Don't divulge the keys
 }
@@ -1797,7 +1813,7 @@ do_dump_command() {
 
     echo
 
-    qt mywhich ss && ss -${g_family}tunap || { qt mywhich netstat && netatat -tunap; }
+    qt mywhich ss && ss -${g_family}tunap || { qt mywhich netstat && netstat -tunap; }
 
     if [ -n "$TC_ENABLED" ]; then
 	heading "Traffic Control"
@@ -2770,7 +2786,7 @@ determine_capabilities() {
     GOTO_TARGET=
     LOGMARK_TARGET=
     IPMARK_TARGET=
-    LOG_TARGET=Yes
+    LOG_TARGET=
     ULOG_TARGET=
     NFLOG_TARGET=
     PERSISTENT_SNAT=
@@ -2803,6 +2819,8 @@ determine_capabilities() {
     WAIT_OPTION=
     CPU_FANOUT=
     NETMAP_TARGET=
+    NFLOG_SIZE=
+    RESTORE_WAIT_OPTION=
 
     AMANDA_HELPER=
     FTP_HELPER=
@@ -2826,9 +2844,11 @@ determine_capabilities() {
 	qt $arptables -L OUT && ARPTABLESJF=Yes
     fi
 
+    [ -z "$(${g_tool}-restore --wait < /dev/null 2>&1)" ] && RESTORE_WAIT_OPTION=Yes
+
     if qt $g_tool --wait -t filter -L INPUT -n -v; then
 	WAIT_OPTION=Yes
-	tool="$tool --wait"
+	g_tool="$g_tool --wait"
     fi
 
     chain=fooX$$
@@ -3134,12 +3154,15 @@ determine_capabilities() {
     qt $g_tool -A $chain -m time --timestart 23:00 -j DROP && TIME_MATCH=Yes
     qt $g_tool -A $chain -g $chain1 && GOTO_TARGET=Yes
     qt $g_tool -A $chain -j LOGMARK && LOGMARK_TARGET=Yes
-    qt $g_tool -A $chain -j LOG || LOG_TARGET=
+    qt $g_tool -A $chain -j LOG && LOG_TARGET=Yes
     qt $g_tool -A $chain -j ULOG && ULOG_TARGET=Yes
-    qt $g_tool -A $chain -j NFLOG && NFLOG_TARGET=Yes
     qt $g_tool -A $chain -j MARK --set-mark 5 && MARK_ANYWHERE=Yes
     qt $g_tool -A $chain -m statistic --mode nth --every 2 --packet 1 && STATISTIC_MATCH=Yes
     qt $g_tool -A $chain -m geoip --src-cc US && GEOIP_MATCH=Yes
+    if qt $g_tool -A $chain -j NFLOG; then
+	NFLOG_TARGET=Yes
+	qt $g_tool -A $chain -j NFLOG --nflog-size 64 && NFLOG_SIZE=Yes
+    fi
 
     if [ $g_family -eq 4 ]; then
 	qt $g_tool -A $chain -j ACCOUNT --addr 192.168.1.0/29 --tname $chain && ACCOUNT_TARGET=Yes
@@ -3295,9 +3318,11 @@ report_capabilities_unsorted() {
     if [ $g_family -eq 4 ]; then
 	report_capability "iptables -S (IPTABLES_S)" $IPTABLES_S
 	report_capability "iptables --wait option (WAIT_OPTION)" $WAIT_OPTION
+	report_capability "iptables-restore --wait option (RESTORE_WAIT_OPTION)" $RESTORE_WAIT_OPTION
     else
 	report_capability "ip6tables -S (IPTABLES_S)" $IPTABLES_S
 	report_capability "ip6tables --wait option (WAIT_OPTION)" $WAIT_OPTION
+	report_capability "ip6tables-restore --wait option (RESTORE_WAIT_OPTION)" $RESTORE_WAIT_OPTION
     fi
 
     report_capability "Basic Filter (BASIC_FILTER)" $BASIC_FILTER
@@ -3305,6 +3330,7 @@ report_capabilities_unsorted() {
     report_capability "CT Target (CT_TARGET)" $CT_TARGET
     report_capability "NFQUEUE CPU Fanout (CPU_FANOUT)" $CPU_FANOUT
     report_capability "NETMAP Target (NETMAP_TARGET)" $NETMAP_TARGET
+    report_capability "--nflog-size support (NFLOG_SIZE)" $NFLOG_SIZE
 
     echo "   Kernel Version (KERNELVERSION): $KERNELVERSION"
     echo "   Capabilities Version (CAPVERSION): $CAPVERSION"
@@ -3411,6 +3437,8 @@ report_capabilities_unsorted1() {
     report_capability1 WAIT_OPTION
     report_capability1 CPU_FANOUT
     report_capability1 NETMAP_TARGET
+    report_capability1 NFLOG_SIZE
+    report_capability1 RESTORE_WAIT_OPTION
 
     report_capability1 AMANDA_HELPER
     report_capability1 FTP_HELPER
@@ -3715,7 +3743,7 @@ ipcalc_command() {
 
     valid_address $address || fatal_error "Invalid IP address: $address"
     [ -z "$vlsm" ] && fatal_error "Missing VLSM"
-    [ "x$address" = "x$vlsm" ] && "Invalid VLSM"
+    [ "x$address" = "x$vlsm" ] && fatal_error "Invalid VLSM"
     [ $vlsm -gt 32 ] && fatal_error "Invalid VLSM: /$vlsm"
 
     address=$address/$vlsm

Shorewall-core/lib.common

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
+# Shorewall 5.1 -- /usr/share/shorewall/lib.common.
 #
-#     (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -269,53 +269,48 @@ loadmodule() # $1 = module name, $2 - * arguments
 {
     local modulename
     modulename=$1
+    shift
+    local moduleoptions
+    moduleoptions=$*
     local modulefile
     local suffix
 
     if [ -d /sys/module/ ]; then
 	if ! list_search $modulename $DONT_LOAD; then
 	    if [ ! -d /sys/module/$modulename ]; then
-		shift
-
-		for suffix in $MODULE_SUFFIX ; do
-		    for directory in $moduledirectories; do
-			modulefile=$directory/${modulename}.${suffix}
-
-			if [ -f $modulefile ]; then
-			    case $moduleloader in
-				insmod)
-				    insmod $modulefile $*
-				    ;;
-				*)
-				    modprobe $modulename $*
-				    ;;
-			    esac
-			    break 2
-			fi
-		    done
-		done
+		case $moduleloader in
+		    insmod)
+			for directory in $moduledirectories; do
+			    for modulefile in $directory/${modulename}.*; do
+				if [ -f $modulefile ]; then
+				    insmod $modulefile $moduleoptions
+				    return
+				fi
+			    done
+			done
+			;;
+		    *)
+			modprobe -q $modulename $moduleoptions
+			;;
+		esac
 	    fi
 	fi
     elif ! list_search $modulename $DONT_LOAD $MODULES; then
-	shift
-
-	for suffix in $MODULE_SUFFIX ; do
-	    for directory in $moduledirectories; do
-		modulefile=$directory/${modulename}.${suffix}
-
-		if [ -f $modulefile ]; then
-		    case $moduleloader in
-			insmod)
-			    insmod $modulefile $*
-			    ;;
-			*)
-			    modprobe $modulename $*
-			    ;;
-		    esac
-		    break 2
-		fi
-	    done
-	done
+	case $moduleloader in
+	    insmod)
+		for directory in $moduledirectories; do
+		    for modulefile in $directory/${modulename}.*; do
+			if [ -f $modulefile ]; then
+			    insmod $modulefile $moduleoptions
+			    return
+			fi
+		    done
+		done
+		;;
+	    *)
+		modprobe -q $modulename $moduleoptions
+		;;
+	esac
     fi
 }
 
@@ -338,8 +333,6 @@ reload_kernel_modules() {
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
-
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)
@@ -394,8 +387,6 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
-
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)

Shorewall-core/lib.core

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.core
+# Shorewall 5.1 -- /usr/share/shorewall/lib.core
 #
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -24,7 +24,7 @@
 # generated scripts.
 #
 
-SHOREWALL_LIBVERSION=50100
+SHOREWALL_LIBVERSION=50108
 
 #
 # Fatal Error

Shorewall-core/lib.installer

@@ -1,6 +1,6 @@
 #
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.installer.
+# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
 #
 #     (c) 2017 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)

Shorewall-core/lib.uninstaller

@@ -1,6 +1,6 @@
 #
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.installer.
+# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
 #
 #     (c) 2017 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)

Shorewall-core/manpages/shorewall.xml

@@ -3173,6 +3173,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/</para>
+
+    <para>/etc/shorewall6/</para>
   </refsect1>
 
   <refsect1>
@@ -3182,13 +3184,18 @@
     url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>
 
     <para>shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    shorewall-arprules(5), shorewall-blrules(5), shorewall.conf(5),
+    shorewall-conntrack(5), shorewall-ecn(5), shorewall-exclusion(5),
+    shorewall-hosts(5), shorewall-init(5), shorewall_interfaces(5),
+    shorewall-ipsets(5), shorewall-logging(), shorewall-maclist(5),
+    shorewall-mangle(5), shorewall-masq(5), shorewall-modules(5),
+    shorewall-nat(5), shorewall-nesting(5), shorewall-netmap(5),
+    shorewall-params(5), shorewall-policy(5), shorewall-providers(5),
+    shorewall-proxyarp(5), shorewall6-proxyndp(5), shorewall-routes(5),
+    shorewall-rtrules(5), shorewall-rtrules(5), shorewall-rules(5),
+    shorewall-secmarks(5), shorewall-snat(5), shorewall-tcclasses(5),
+    shorewall-tcdevices(5), shorewall-tcfilters(5), shorewall-tcinterfaces(5),
+    shorewall-tcpri(5), shorewall-tunnels(5), shorewall-vardir(5),
+    shorewall-zones(5)</para>
   </refsect1>
 </refentry>

Shorewall-core/shorewall

@@ -1,8 +1,8 @@
 #!/bin/sh
 #
-#     Shorewall Packet Filtering Firewall Control Program - V5.0
+#     Shorewall Packet Filtering Firewall Control Program - V5.1
 #
-#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015 -
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015-2017
 #         Tom Eastep (teastep@shorewall.net)
 #
 #	Shorewall documentation is available at http://www.shorewall.net
@@ -25,6 +25,10 @@
 #       For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
 #
 ################################################################################################
+#
+# Default product is Shorewall. PRODUCT will be set based on $0 and on passed -[46] and -l
+# options
+#
 PRODUCT=shorewall
 
 #

Shorewall-init/init.debian.sh

@@ -73,12 +73,16 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
-	${SBINDIR}/shorewall compile
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
+    if [ -x ${STATEDIR}/firewall ]; then
+        return 0
     else
-	return 0
+        if [ $PRODUCT = shorewall ]; then
+            ${SBINDIR}/shorewall compile
+        elif [ $PRODUCT = shorewall6 ]; then
+            ${SBINDIR}/shorewall -6 compile
+        else
+            return 1
+        fi
     fi
 }
 
@@ -108,16 +112,14 @@ shorewall_start () {
 
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-              #
-	      # Run in a sub-shell to avoid name collisions
-	      #
-	      (
-		  if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		      ${STATEDIR}/firewall ${OPTIONS} stop
-		  fi
-	      )
-	  fi
+          #
+	  # Run in a sub-shell to avoid name collisions
+	  #
+	  (
+	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
+	  )
       fi
   done
 
@@ -145,9 +147,7 @@ shorewall_stop () {
   printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      ${STATEDIR}/firewall ${OPTIONS} clear
-	  fi
+	  ${STATEDIR}/firewall ${OPTIONS} clear
       fi
   done
 
@@ -159,8 +159,9 @@ shorewall_stop () {
 
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
       else
+	  rm -f "${SAVE_IPSETS}.tmp"
 	  echo_notdone
       fi
 

Shorewall-init/init.fedora.sh

@@ -44,12 +44,14 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+	return 0
+    elif [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
     else
-	return 0
+	return 1
     fi
 }
 
@@ -66,20 +68,20 @@ start () {
 
     printf "Initializing \"Shorewall-based firewalls\": "
 
+    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+	ipset -R < "$SAVE_IPSETS"
+    fi
+
     for PRODUCT in $PRODUCTS; do
 	setstatedir
 	retval=$?
 
 	if [ $retval -eq 0 ]; then
-	    if [ -x "${STATEDIR}/firewall" ]; then
-		${STATEDIR}/firewall ${OPTIONS} stop 2>&1 | $logger
-		retval=${PIPESTATUS[0]}
-		[ $retval -ne 0 ] && break
-	    else
-		retval=6 #Product not configured
-		break
-	    fi
+	    ${STATEDIR}/firewall ${OPTIONS} stop 2>&1 | $logger
+	    retval=${PIPESTATUS[0]}
+	    [ $retval -ne 0 ] && break
 	else
+	    retval=6 #Product not configured
 	    break
 	fi
     done
@@ -106,20 +108,25 @@ stop () {
 	retval=$?
 
 	if [ $retval -eq 0 ]; then
-	    if [ -x "${STATEDIR}/firewall" ]; then
-		${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | $logger
-		retval=${PIPESTATUS[0]}
-		[ $retval -ne 0 ] && break
-	    else
-		retval=6 #Product not configured
-		break
-	    fi
+	    ${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | $logger
+	    retval=${PIPESTATUS[0]}
+	    [ $retval -ne 0 ] && break
 	else
+	    retval=6 #Product not configured
 	    break
 	fi
     done
 
     if [ $retval -eq 0 ]; then
+	if [ -n "$SAVE_IPSETS" ]; then
+	    mkdir -p $(dirname "$SAVE_IPSETS")
+	    if ipset -S > "${SAVE_IPSETS}.tmp"; then
+		grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	    else
+		rm -f "${SAVE_IPSETS}.tmp"
+	    fi
+	fi
+
 	rm -f $lockfile
 	success
     else

Shorewall-init/init.openwrt.sh

@@ -75,12 +75,14 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+	return 0
+    elif [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
     else
-	return 0
+	return 1
     fi
 }
 
@@ -92,10 +94,8 @@ start () {
   printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop
-	      fi
+	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+	      ${STATEDIR}/firewall ${OPTIONS} stop
 	  fi
       fi
   done
@@ -103,6 +103,8 @@ start () {
   if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
       ipset -R < "$SAVE_IPSETS"
   fi
+
+  return 0
 }
 
 boot () {
@@ -117,17 +119,19 @@ stop () {
     printf "Clearing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
-		${STATEDIR}/firewall ${OPTIONS} clear
-	    fi
+	    ${STATEDIR}/firewall ${OPTIONS} clear
 	fi
     done
 
     if [ -n "$SAVE_IPSETS" ]; then
 	mkdir -p $(dirname "$SAVE_IPSETS")
 	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	else
+	    rm -f "${SAVE_IPSETS}.tmp"
 	fi
     fi
+
+    return 0
 }
 

Shorewall-init/init.sh

@@ -69,10 +69,12 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+	return 0
+    elif [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
     else
-	return 0
+	return 1
     fi
 }
 
@@ -84,10 +86,8 @@ shorewall_start () {
   printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop
-	      fi
+	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+	      ${STATEDIR}/firewall ${OPTIONS} stop
 	  fi
       fi
   done
@@ -107,16 +107,16 @@ shorewall_stop () {
   printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      ${STATEDIR}/firewall ${OPTIONS} clear
-	  fi
+	  ${STATEDIR}/firewall ${OPTIONS} clear
       fi
   done
 
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+      else
+	  rm -f "${SAVE_IPSETS}.tmp"
       fi
   fi
 

Shorewall-init/init.suse.sh

@@ -79,12 +79,14 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+	return 0
+    elif [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
     else
-	return 0
+	return 6
     fi
 }
 
@@ -96,10 +98,8 @@ shorewall_start () {
   printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x $STATEDIR/firewall ]; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-		  $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
-	      fi
+	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+	      $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
 	  fi
       fi
   done
@@ -117,16 +117,16 @@ shorewall_stop () {
   printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      ${STATEDIR}/firewall ${OPTIONS} clear
-	  fi
+	  ${STATEDIR}/firewall ${OPTIONS} clear
       fi
   done
 
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+      else
+	  rm -f "${SAVE_IPSETS}.tmp"
       fi
   fi
 }

Shorewall-init/shorewall-init

@@ -33,12 +33,12 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+       return 0
+    elif [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
-    else
-	return 0
     fi
 }
 
@@ -67,16 +67,14 @@ shorewall_start () {
     printf "Initializing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
-		#
-		# Run in a sub-shell to avoid name collisions
-		#
-		(
-		    if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-			${STATEDIR}/firewall ${OPTIONS} stop
-		    fi
-		)
-	    fi
+	    #
+	    # Run in a sub-shell to avoid name collisions
+	    #
+	    (
+		if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		    ${STATEDIR}/firewall ${OPTIONS} stop
+		fi
+	    )
 	fi
     done
 
@@ -95,16 +93,16 @@ shorewall_stop () {
     printf "Clearing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
-		${STATEDIR}/firewall ${OPTIONS} clear
-	    fi
+	    ${STATEDIR}/firewall ${OPTIONS} clear
 	fi
     done
 
     if [ -n "$SAVE_IPSETS" ]; then
 	mkdir -p $(dirname "$SAVE_IPSETS")
 	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	else
+	    rm -f "${SAVE_IPSETS}.tmp"
 	fi
     fi
 

Shorewall-lite/shorecap

@@ -28,7 +28,7 @@
 #
 #   On the target system (the system where the firewall program is to run):
 #
-#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] [ MODULE_SUFFIX="<module suffix list>" ] shorecap > capabilities
+#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] shorecap > capabilities
 #
 #    Now move the capabilities file to the compilation system. The file must
 #    be placed in a directory on the CONFIG_PATH to be used when compiling firewalls
@@ -38,7 +38,6 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
-#        MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not

Shorewall/Actions/action.AllowICMPs

@@ -13,7 +13,6 @@ DEFAULTS ACCEPT
     @1	-	-	icmp	time-exceeded		{comment="Needed ICMP types"}
 ?else
 ?COMMENT Needed ICMP types (RFC4890)
-
     @1	-		-	ipv6-icmp	destination-unreachable
     @1	-		-	ipv6-icmp	packet-too-big
     @1	-		-	ipv6-icmp	time-exceeded
@@ -38,7 +37,7 @@ DEFAULTS ACCEPT
     @1	-		-	ipv6-icmp	148	# Certificate path solicitation
     @1	-		-	ipv6-icmp	149	# Certificate path advertisement
 
-# The following should have a link local source address and a ttl of 1 and must be allowed to transit abridge
+# The following should have a link local source address and a ttl of 1 and must be allowed to transit a bridge
     @1	fe80::/10	-	ipv6-icmp	151	# Multicast router advertisement
     @1	fe80::/10	-	ipv6-icmp	152	# Multicast router solicitation
     @1	fe80::/10	-	ipv6-icmp	153	# Multicast router termination

Shorewall/Actions/action.FIN

@@ -0,0 +1,33 @@
+#
+# Shorewall -- /usr/share/shorewall/action.FIN
+#
+# FIN Action
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# FIN[([<action>])]
+#
+# Default action is ACCEPT
+#
+###############################################################################
+
+DEFAULTS ACCEPT,-
+
+@1	 -	-	;;+ -p 6 --tcp-flags ACK,FIN ACK,FIN

Shorewall/Actions/action.IfEvent

@@ -107,6 +107,11 @@ if ( $command & $REAP_OPT ) {
 
 $duration .= '--rttl ' if $command & $TTL_OPT;
 
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "-m recent --rcheck ${duration}--hitcount $hitcount" );
+    $action = 'ACCEPT';
+}
+
 if ( $command & $RESET_CMD ) {
     require_capability 'MARK_ANYWHERE', '"reset"', 's';
 

Shorewall/Actions/action.ResetEvent

@@ -41,6 +41,11 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
 set_action_disposition( $disposition) if supplied $disposition;
 set_action_name_to_caller;
 
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "" );
+    $action = 'ACCEPT';
+}
+
 if ( $destination eq 'dst' ) {
     perl_action_helper( $action, '', '', "-m recent --name $event --remove --rdest" );
 } else {

Shorewall/Actions/action.SetEvent

@@ -37,6 +37,11 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
 set_action_disposition( $disposition) if supplied $disposition;
 set_action_name_to_caller;
 
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "" );
+    $action = 'ACCEPT';
+}
+
 if ( $destination eq 'dst' ) {
     perl_action_helper( $action, '', '', "-m recent --name $event --set --rdest" );
 } else {

Shorewall/Actions/action.TCPFlags

@@ -26,4 +26,4 @@ $tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL FIN,URG,PSH
 $tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL NONE
 $tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,RST SYN,RST
 $tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,FIN SYN,FIN
-$tcpflags_action	-	-	;;+ -p tcp --syn --sport 0
+$tcpflags_action	-	-	;;+ -p 6 --syn --sport 0

Shorewall/Actions/action.dropBcasts

@@ -0,0 +1,39 @@
+#
+# Shorewall -- /usr/share/shorewall/action.dropBcasts
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# dropBcasts[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	Broadcast(A_DROP)
+    ?else
+	?error "Invalid argument (@1) to dropBcasts"
+    ?endif
+?else
+    Broadcast(DROP)
+?endif
+

Shorewall/Macros/macro.IPMI

@@ -15,6 +15,7 @@ PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
 PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)
 PARAM	-	-	tcp	5900,5901	# Remote Console (Aten, Dell)
 PARAM	-	-	tcp	7578		# Remote Console (AMI)
+PARAM	-	-	tcp	3520		# Remote Console (Redfish)
 PARAM	-	-	udp	623		# RMCP
 HTTP
 HTTPS

Shorewall/Macros/macro.RDP

@@ -6,4 +6,5 @@
 ###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
+PARAM	-	-	udp	3389
 PARAM	-	-	tcp	3389

Shorewall/Makefile-lite

@@ -1,82 +0,0 @@
-#     Shorewall Packet Filtering Firewall Export Directory Makefile - V4.2
-#
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 2006 - Tom Eastep (teastep@shorewall.net)
-#
-#	Shorewall documentation is available at http://www.shorewall.net
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of Version 2 of the GNU General Public License
-#	as published by the Free Software Foundation.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, write to the Free Software
-#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-################################################################################
-# Place this file in each export directory. Modify each copy to set HOST
-# to the name of the remote firewall corresponding to the directory.
-#
-#	To make the 'firewall' script, type "make".
-#
-#	Once the script is compiling correctly, you can install it by
-#	typing "make install".
-#
-################################################################################
-#                             V A R I A B L E S
-#
-# Files in the export directory on which the firewall script does not depend
-#
-IGNOREFILES =  firewall% Makefile% trace% %~
-#
-# Remote Firewall system
-#
-HOST = gateway
-#
-# Save some typing
-#
-LITEDIR = /var/lib/shorewall-lite
-#
-# Set this if the remote system has a non-standard modules directory
-#
-MODULESDIR=
-#
-# Default target is the firewall script
-#
-################################################################################
-#                                T A R G E T S
-#
-all: firewall
-#
-# Only generate the capabilities file if it doesn't already exist
-#
-capabilities:
-	ssh root@$(HOST) "MODULESDIR=$(MODULESDIR) /usr/share/shorewall-lite/shorecap > $(LITEDIR)/capabilities"
-	scp root@$(HOST):$(LITEDIR)/capabilities .
-#
-# Compile the firewall script. Using the 'wildcard' function causes "*" to be expanded so that
-# 'filter-out' will be presented with the list of files in this directory rather than "*"
-#
-firewall: $(filter-out $(IGNOREFILES) capabilities , $(wildcard *) ) capabilities
-	shorewall compile -e . firewall
-#
-# Only reload on demand.
-#
-install: firewall
-	scp firewall firewall.conf root@$(HOST):$(LITEDIR)
-	ssh root@$(HOST) "/sbin/shorewall-lite restart"
-#
-# Save running configuration
-#
-save:
-	ssh root@$(HOST) "/sbin/shorewall-lite save"
-#
-# Remove generated files
-#
-clean:
-	rm -f capabilities firewall firewall.conf reload

Shorewall/Perl/Shorewall/Accounting.pm

@@ -195,7 +195,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
     $ports  = ''    if $ports  eq 'any' || $ports  eq 'all';
     $sports = ''    if $sports eq 'any' || $sports eq 'all';
 
-    fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT;
+    fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT_SECTION;
 
     my $rule = do_proto( $proto, $ports, $sports ) . do_user ( $user ) . do_test ( $mark, $globals{TC_MASK} ) . do_headers( $headers );
     my $prerule = '';
@@ -266,7 +266,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
     if ( $source eq 'any' || $source eq 'all' ) {
         $source = ALLIP;
     } else {
-	fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT || ! $asection );
+	fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT_SECTION || ! $asection );
     }
 
     if ( have_bridges && ! $asection ) {

Shorewall/Perl/Shorewall/Chains.pm

@@ -32,6 +32,7 @@ require Exporter;
 use Scalar::Util 'reftype';
 use Digest::SHA qw(sha1_hex);
 use File::Basename;
+use Socket;
 use Shorewall::Config qw(:DEFAULT :internal);
 use Shorewall::Zones;
 use Shorewall::IPAddrs;
@@ -137,6 +138,12 @@ our %EXPORT_TAGS = (
 				       ALL_COMMANDS
 				       NOT_RESTORE
 
+				       validate_port
+				       validate_portpair
+				       validate_portpair1
+				       validate_port_list
+				       expand_port_range
+
 				       PREROUTING
 				       INPUT
 				       FORWARD
@@ -509,6 +516,7 @@ our $idiotcount1;
 our $hashlimitset;
 our $global_variables;
 our %address_variables;
+our %port_variables;
 our $ipset_rules;
 
 #
@@ -784,6 +792,7 @@ sub initialize( $$$ ) {
     %interfaceacasts    = ();
     %interfacegateways  = ();
     %address_variables  = ();
+    %port_variables     = ();
 
     $global_variables   = 0;
     $idiotcount         = 0;
@@ -819,6 +828,211 @@ sub initialize( $$$ ) {
     #
 }
 
+sub record_runtime_port( $ ) {
+    my ( $variable ) = @_;
+
+    if ( $variable =~ /^{([a-zA-Z_]\w*)}$/ ) {
+	fatal_error "Variable %variable is already used as an address variable" if $address_variables{$1};
+	$port_variables{$1} = 1;
+    } else {
+	fatal_error( "Invalid port variable (%$variable)" );
+    }
+
+    "\$$variable";
+}
+
+################################################################################
+# Functions moved from IPAddrs.pm in 5.1.5				       #
+################################################################################
+
+sub validate_port( $$ ) {
+    my ($proto, $port) = @_;
+
+    my $value;
+
+    if ( $port =~ /^(\d+)$/ || $port =~ /^0x/ ) {
+	$value = numeric_value $port;
+
+	if ( defined $value ) {
+	    if ( $value && $value <= 65535 ) {
+		return $value;
+	    } else {
+		$value = undef;
+	    }
+	}
+    } elsif ( $port =~ /^%(.*)/ ) {
+	$value = record_runtime_port( $1 );
+    } else {
+	$proto = proto_name $proto if $proto =~ /^(\d+)$/;
+	$value = getservbyname( $port, $proto );
+    }
+
+    return $value if defined $value;
+
+    fatal_error "The separator for a port range is ':', not '-' ($port)" if $port =~ /^\d+-\d+$/;
+
+    fatal_error "Invalid/Unknown $proto port/service ($_[1])" unless defined $value;
+}
+
+sub validate_portpair( $$ ) {
+    my ($proto, $portpair) = @_;
+    my $what;
+    my $pair = $portpair;
+    #
+    # Accept '-' as a port-range separator
+    #
+    $pair =~ tr/-/:/ if $pair =~ /^[-0-9]+$/;
+
+    fatal_error "Invalid port range ($portpair)" if $pair =~ tr/:/:/ > 1;
+
+    $pair = "0$pair"       if substr( $pair,  0, 1 ) eq ':';
+    $pair = "${pair}65535" if substr( $pair, -1, 1 ) eq ':';
+
+    my @ports = split /:/, $pair, 2;
+
+    my $protonum = resolve_proto( $proto ) || 0;
+
+    $_ = validate_port( $protonum, $_) for grep $_, @ports;
+
+    if ( @ports == 2 ) {
+	$what = 'port range';
+
+	unless ($ports[0] =~ /^\$/ || $ports[1] =~ /^\$/ ) {
+	    fatal_error "Invalid port range ($_[1])" unless $ports[0] < $ports[1];
+	}
+    } else {
+	$what = 'port';
+    }
+
+    fatal_error "Using a $what ( $_[1] ) requires PROTO TCP, UDP, UDPLITE, SCTP or DCCP" unless
+	defined $protonum && ( $protonum == TCP     ||
+			       $protonum == UDP     ||
+			       $protonum == UDPLITE ||
+			       $protonum == SCTP    ||
+			       $protonum == DCCP );
+    join ':', @ports;
+
+}
+
+sub validate_portpair1( $$ ) {
+    my ($proto, $portpair) = @_;
+    my $what;
+
+    fatal_error "Invalid port range ($portpair)" if $portpair =~ tr/-/-/ > 1;
+
+    $portpair = "1$portpair"       if substr( $portpair,  0, 1 ) eq ':';
+    $portpair = "${portpair}65535" if substr( $portpair, -1, 1 ) eq ':';
+
+    my @ports = split /-/, $portpair, 2;
+
+    my $protonum = resolve_proto( $proto ) || 0;
+
+    $_ = validate_port( $protonum, $_) for grep $_, @ports;
+
+    if ( @ports == 2 ) {
+	$what = 'port range';
+
+	unless ($ports[0] =~ /^\$/ || $ports[1] =~ /^\$/ ) {
+	    fatal_error "Invalid port range ($portpair)" unless $ports[0] && $ports[0] < $ports[1];
+	}
+    } else {
+	$what = 'port';
+	fatal_error 'Invalid port number (0)' unless $portpair;
+    }
+
+    fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, SCTP or DCCP" unless
+	defined $protonum && ( $protonum == TCP  ||
+			       $protonum == UDP  ||
+			       $protonum == SCTP ||
+			       $protonum == DCCP );
+    join '-', @ports;
+
+}
+
+sub validate_port_list( $$ ) {
+    my $result = '';
+    my ( $proto, $list ) = @_;
+    my @list   = split_list( $list, 'port' );
+
+    if ( @list > 1 && $list =~ /[:-]/ ) {
+	require_capability( 'XMULTIPORT' , 'Port ranges in a port list', '' );
+    }
+
+    $proto = proto_name $proto;
+
+    for ( @list ) {
+	my $value = validate_portpair( $proto , $_ );
+	$result = $result ? join ',', $result, $value : $value;
+    }
+
+    $result;
+}
+
+#
+# Expands a port range into a minimal list of ( port, mask ) pairs.
+# Each port and mask are expressed as 4 hex nibbles without a leading '0x'.
+#
+# Example:
+#
+#       DB<3> @foo = Shorewall::IPAddrs::expand_port_range( 6, '110:' ); print "@foo\n"
+#       006e fffe 0070 fff0 0080 ff80 0100 ff00 0200 fe00 0400 fc00 0800 f800 1000 f000 2000 e000 4000 c000 8000 8000
+#
+sub expand_port_range( $$ ) {
+    my ( $proto, $range ) = @_;
+
+    if ( $range =~ /^(.*):(.*)$/ ) {
+	my ( $first, $last ) = ( $1, $2);
+	my @result;
+
+	fatal_error "Invalid port range ($range)" unless $first ne '' or $last ne '';
+	#
+	# Supply missing first/last port number
+	#
+	$first = 0     if $first eq '';
+	$last  = 65535 if $last eq '';
+	#
+	# Validate the ports
+	#
+	( $first , $last ) = ( validate_port( $proto, $first || 1 ) , validate_port( $proto, $last ) );
+
+	$last++; #Increment last address for limit testing.
+	#
+	# Break the range into groups:
+	#
+	#      - If the first port in the remaining range is odd, then the next group is ( <first>, ffff ).
+	#      - Otherwise, find the largest power of two P that divides the first address such that
+	#        the remaining range has less than or equal to P ports. The next group is
+	#        ( <first> , ~( P-1 ) ).
+	#
+	while ( ( my $ports = ( $last - $first ) ) > 0 ) {
+	    my $mask = 0xffff;         #Mask for current ports in group.
+	    my $y    = 2;              #Next power of two to test
+	    my $z    = 1;              #Number of ports in current group (Previous value of $y).
+
+	    while ( ( ! ( $first % $y ) ) && ( $y <= $ports ) ) {
+		$mask <<= 1;
+		$z  = $y;
+		$y <<= 1;
+	    }
+	    #
+	    #
+	    push @result, sprintf( '%04x', $first ) , sprintf( '%04x' , $mask & 0xffff );
+	    $first += $z;
+	}
+
+	fatal_error "Invalid port range ($range)" unless @result; # first port > last port
+
+	@result;
+
+    } else {
+	( sprintf( '%04x' , validate_port( $proto, $range ) ) , 'ffff' );
+    }
+}
+
+################################################################################
+# End functions moved from IPAddrs.pm in 5.1.5				       #
+################################################################################
+
 #
 # Functions to manipulate cmdlevel
 #
@@ -1131,8 +1345,6 @@ sub format_rule( $$;$ ) {
 	    } else {
 		$rule .= join( '' , ' --', $_, ' ', $value );
 	    }
-
-	    next;
 	} elsif ( $type == EXPENSIVE ) {
 	    #
 	    # Only emit expensive matches now if there are '-m nfacct' or '-m recent' matches in the rule
@@ -1191,13 +1403,15 @@ sub compatible( $$ ) {
     }
     #
     # Don't combine chains where each specifies
-    #    -m policy
+    #    -m policy and the policies are different
     # or when one specifies
     #    -m multiport
     # and the other specifies
     #    --dport or --sport or -m multiport
     #
-    return ! ( $ref1->{policy} && $ref2->{policy} ||
+    my ( $p1, $p2 );
+
+    return ! ( ( ( $p1 = $ref1->{policy} ) && ( $p2 = $ref2->{policy} ) && $p1 ne $p2 ) ||
 	       ( ( $ref1->{multiport} && ( $ref2->{dport} || $ref2->{sport} || $ref2->{multiport} ) ) ||
 		 ( $ref2->{multiport} && ( $ref1->{dport} || $ref1->{sport} ) ) ) );
 }
@@ -1715,7 +1929,7 @@ sub delete_reference( $$ ) {
 
     assert( $toref );
 
-    delete $toref->{references}{$fromref->{name}} unless --$toref->{references}{$fromref->{name}} > 0;
+    delete $toref->{references}{$fromref->{name}} if --$toref->{references}{$fromref->{name}} <= 0;
 }
 
 #
@@ -1853,7 +2067,7 @@ sub adjust_reference_counts( $$$ ) {
     my ($toref, $name1, $name2) = @_;
 
     if ( $toref ) {
-	delete $toref->{references}{$name1} unless --$toref->{references}{$name1} > 0;
+	delete $toref->{references}{$name1} if --$toref->{references}{$name1} <= 0;
 	$toref->{references}{$name2}++;
     }
 }
@@ -3061,8 +3275,10 @@ sub initialize_chain_table($) {
 	$chainref = new_nat_chain( 'DOCKER' );
 	set_optflags( $chainref, DONT_OPTIMIZE | DONT_DELETE | DONT_MOVE );
 	add_commands( $chainref, '[ -f ${VARDIR}/.nat_DOCKER ] && cat ${VARDIR}/.nat_DOCKER >&3' );
+	$chainref = new_standard_chain( 'DOCKER-INGRESS'   );
 	$chainref = new_standard_chain( 'DOCKER-ISOLATION' );
 	set_optflags( $chainref, DONT_OPTIMIZE | DONT_DELETE | DONT_MOVE );
+	add_commands( $chainref, '[ -f ${VARDIR}/.filter_DOCKER-INGRESS   ] && cat ${VARDIR}/.filter_DOCKER-INGRESS   >&3' );
 	add_commands( $chainref, '[ -f ${VARDIR}/.filter_DOCKER-ISOLATION ] && cat ${VARDIR}/.filter_DOCKER-ISOLATION >&3' );
     }
 
@@ -3459,7 +3675,7 @@ sub optimize_level4( $$ ) {
 				#
 				delete_chain_and_references( $chainref );
 				$progress = 1;
-			    } elsif ( $chainref->{builtin} || ! $globals{KLUDGEFREE} || $firstrule->{policy} ) {
+			    } elsif ( $chainref->{builtin} || ! $globals{KLUDGEFREE} ) {
 				#
 				# This case requires a new rule merging algorithm. Ignore this chain from
 				# now on.
@@ -3686,6 +3902,15 @@ sub optimize_level8( $$$ ) {
 		    }
 
 		    $combined{ $chainref1->{name} } = $chainref->{name};
+		    #
+		    # While rare, it is possible for a policy chain to be combined with a non-policy chain. So we need to preserve
+		    # the policy attributes in the combined chain
+		    #
+		    if ( $chainref->{policychain} ) {
+			@{$chainref1}{qw(policychain policy)} = @{$chainref}{qw(policychain policy)} unless $chainref1->{policychain};
+		    } elsif ( $chainref1->{policychain} ) {
+			@{$chainref}{qw(policychain policy)} = @{$chainref1}{qw(policychain policy)} unless $chainref->{policychain};
+		    }
 		}
 	    }
 	}
@@ -4612,7 +4837,7 @@ sub do_proto( $$$;$ )
 				$multiport = 1;
 			    }  else {
 				fatal_error "Missing DEST PORT" unless supplied $ports;
-				$ports   = validate_portpair $pname , $ports;
+				$ports   = validate_portpair $pname , $ports unless $ports =~ /^\$/;
 				$output .= ( $srcndst ? "-m multiport ${invert}--ports ${ports} " : "${invert}--dport ${ports} " );
 			    }
 			}
@@ -4819,7 +5044,7 @@ sub do_iproto( $$$ )
 				$multiport = 1;
 			    }  else {
 				fatal_error "Missing DEST PORT" unless supplied $ports;
-				$ports   = validate_portpair $pname , $ports;
+				$ports   = validate_portpair $pname , $ports unless $ports =~ /^\$/;
 
 				if ( $srcndst ) {
 				    push @output, multiport => "${invert}--ports ${ports}";
@@ -5758,6 +5983,7 @@ sub record_runtime_address( $$;$$ ) {
 
     if ( $interface =~ /^{([a-zA-Z_]\w*)}$/ ) {
 	fatal_error "Mixed required/optional usage of address variable $1" if ( $address_variables{$1} || $addrtype ) ne $addrtype;
+	fatal_error "Variable %variable is already used as a port variable" if $port_variables{$1};
 	$address_variables{$1} = $addrtype;
 	return '$' . "$1 ";
     }
@@ -6103,7 +6329,7 @@ sub match_dest_net( $;$ ) {
 	return '-d ' . record_runtime_address $1, $2;
     }
 
-    $net = validate_net $net, 1;
+    $net = validate_net $net, 1 unless $net =~ /^\$/; # Don't validate if runtime address variable
     $net eq ALLIP ? '' : "-d $net ";
 }
 
@@ -6184,7 +6410,7 @@ sub imatch_dest_net( $;$ ) {
 	return ( d => record_runtime_address( $1, $2, 1 ) );
     }
 
-    $net = validate_net $net, 1;
+    $net = validate_net $net, 1 unless $net =~ /^\$/; # Don't validate if runtime address variable
     $net eq ALLIP ? () : ( d =>  $net );
 }
 
@@ -6843,6 +7069,8 @@ sub interface_gateway( $ ) {
 sub get_interface_gateway ( $;$$ ) {
     my ( $logical, $protect, $provider ) = @_;
 
+    $provider = '' unless defined $provider;
+
     my $interface = get_physical $logical;
     my $variable = interface_gateway( $interface );
     my $gateway  = get_interface_option( $interface, 'gateway' );
@@ -6856,9 +7084,9 @@ sub get_interface_gateway ( $;$$ ) {
     }
 
     if ( interface_is_optional $logical ) {
-	$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface));
+	$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface $provider));
     } else {
-	$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface)
+	$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface $provider)
 [ -n "\$$variable" ] || startup_error "Unable to detect the gateway through interface $interface");
     }
 
@@ -7045,6 +7273,19 @@ sub verify_address_variables() {
 	      qq(    startup_error "Invalid value ($address) for address variable $variable"),
 	      qq(fi\n) );
     }
+
+    for my $variable( keys %port_variables ) {
+	my $port = "\$$variable";
+	my $type = $port_variables{$variable};
+
+	emit( qq(if [ -z "$port" ]; then) ,
+	      qq(    $variable=255) ,
+	      qq(elif qt \$g_tool -A INPUT -p 6 --dport $port; then) ,
+	      qq(    qt \$g_tool -D INPUT -p 6 --dport $variable) ,
+	      qq(else) ,
+	      qq(    startup_error "Invalid valid ($port) for port variable $variable") ,
+	      qq(fi\n) );
+    }
 }
 
 #
@@ -7294,6 +7535,11 @@ sub isolate_dest_interface( $$$$ ) {
 
 	    $rule .= "-d $variable ";
 	}
+    } elsif ( $dest =~ /^\$/ ) {
+	#
+	# Runtime address variable
+	#
+	$dnets  = $dest;
     } elsif ( $family == F_IPV4 ) {
 	if ( $dest =~ /^(.+?):(.+)$/ ) {
 	    $diface = $1;
@@ -8217,6 +8463,7 @@ sub save_docker_rules($) {
 	  qq(    $tool -t nat -S OUTPUT | tail -n +2 | fgrep DOCKER > \${VARDIR}/.nat_OUTPUT),
 	  qq(    $tool -t nat -S POSTROUTING | tail -n +2 | fgrep -v SHOREWALL > \${VARDIR}/.nat_POSTROUTING),
 	  qq(    $tool -t filter -S DOCKER | tail -n +2 > \${VARDIR}/.filter_DOCKER),
+	  qq(    [ -n "\$g_dockeringress" ] && $tool -t filter -S DOCKER-INGRESS   | tail -n +2 > \${VARDIR}/.filter_DOCKER-INGRESS),
 	  qq(    [ -n "\$g_dockernetwork" ] && $tool -t filter -S DOCKER-ISOLATION | tail -n +2 > \${VARDIR}/.filter_DOCKER-ISOLATION)
 	);
 
@@ -8232,6 +8479,7 @@ sub save_docker_rules($) {
 	  q(    rm -f ${VARDIR}/.nat_OUTPUT),
 	  q(    rm -f ${VARDIR}/.nat_POSTROUTING),
 	  q(    rm -f ${VARDIR}/.filter_DOCKER),
+	  q(    rm -f ${VARDIR}/.filter_DOCKER-INGRESS),
 	  q(    rm -f ${VARDIR}/.filter_DOCKER-ISOLATION),
 	  q(    rm -f ${VARDIR}/.filter_FORWARD),
 	  q(fi)
@@ -8674,9 +8922,15 @@ sub create_netfilter_load( $ ) {
     my $UTILITY = $family == F_IPV4 ? 'IPTABLES_RESTORE' : 'IP6TABLES_RESTORE';
 
     emit( '',
-	  'if [ "$COMMAND" = reload -a -n "$g_counters" ] && chain_exists $g_sha1sum1 && chain_exists $g_sha1sum2 ; then',
-	  '    option="--counters"',
-	  '',
+	  'if [ "$COMMAND" = reload -a -n "$g_counters" ] && chain_exists $g_sha1sum1 && chain_exists $g_sha1sum2 ; then' );
+
+    if ( have_capability( 'RESTORE_WAIT_OPTION' ) ) {
+	emit( '    option="--counters --wait "' . $config{MUTEX_TIMEOUT} );
+    } else {
+	emit( '    option="--counters"' );
+    }
+
+    emit( '',
 	  '    progress_message "Reusing existing ruleset..."',
 	  '',
 	  'else'
@@ -8684,7 +8938,11 @@ sub create_netfilter_load( $ ) {
 
     push_indent;
 
-    emit 'option=';
+    if ( have_capability( 'RESTORE_WAIT_OPTION' ) ) {
+	emit 'option="--wait "' . $config{MUTEX_TIMEOUT};
+    } else {
+	emit 'option=';
+    }
 
     save_progress_message "Preparing $utility input...";
 
@@ -8733,6 +8991,10 @@ sub create_netfilter_load( $ ) {
 			enter_cmd_mode;
 			emit( '[ -n "$g_dockernetwork" ] && echo ":DOCKER-ISOLATION - [0:0]" >&3' );
 			enter_cat_mode;
+		    } elsif ( $name eq 'DOCKER-INGRESS' ) {
+			enter_cmd_mode;
+			emit( '[ -n "$g_dockeringress" ] && echo ":DOCKER-INGRESS - [0:0]" >&3' );
+			enter_cat_mode;
 		    } else {		    
 			emit_unindented ":$name - [0:0]";
 		    }
@@ -8837,6 +9099,11 @@ sub preview_netfilter_load() {
 			print( '[ -n "$g_dockernetwork" ] && echo ":DOCKER-ISOLATION - [0:0]" >&3' );
 			print "\n";
 			enter_cat_mode1;
+		    } elsif ( $name eq 'DOCKER-INGRESS' ) {
+			enter_cmd_mode1 unless $mode == CMD_MODE;
+			print( '[ -n "$g_dockeringress" ] && echo ":DOCKER-INGRESS - [0:0]" >&3' );
+			print "\n";
+			enter_cat_mode1;
 		    } else {		    
 			enter_cmd_mode1 unless $mode == CMD_MODE;
 			print( ":$name - [0:0]\n" );
@@ -9074,6 +9341,10 @@ sub create_stop_load( $ ) {
 			enter_cmd_mode;
 			emit( '[ -n "$g_dockernetwork" ] && echo ":DOCKER-ISOLATION - [0:0]" >&3' );
 			enter_cat_mode;
+		    } elsif ( $name eq 'DOCKER-INGRESS' ) {
+			enter_cmd_mode;
+			emit( '[ -n "$g_dockeringress" ] && echo ":DOCKER-INGRESS - [0:0]" >&3' );
+			enter_cat_mode;
 		    } else {		    
 			emit_unindented ":$name - [0:0]";
 		    }
@@ -9099,7 +9370,11 @@ sub create_stop_load( $ ) {
 
     enter_cmd_mode;
 
-    emit( '[ -n "$g_debug_iptables" ] && command=debug_restore_input || command=$' . $UTILITY );
+    if ( have_capability( 'RESTORE_WAIT_OPTION' ) ) {
+	emit( '[ -n "$g_debug_iptables" ] && command=debug_restore_input || command="$' . $UTILITY . ' --wait ' . $config{MUTEX_TIMEOUT} . '"' );
+    } else {
+	emit( '[ -n "$g_debug_iptables" ] && command=debug_restore_input || command=$' . $UTILITY );
+    }
 
     emit( '',
 	  'progress_message2 "Running $command..."',

Shorewall/Perl/Shorewall/Compiler.pm

@@ -59,7 +59,7 @@ our $have_arptables;
 # Initilize the package-globals in the other modules
 #
 sub initialize_package_globals( $$$ ) {
-    Shorewall::Config::initialize($family, $_[1], $_[2]);
+    Shorewall::Config::initialize($family, $export, $_[1], $_[2]);
     Shorewall::Chains::initialize ($family, 1, $export );
     Shorewall::Zones::initialize ($family, $_[0]);
     Shorewall::Nat::initialize($family);
@@ -109,7 +109,7 @@ sub generate_script_1( $ ) {
 ################################################################################
 EOF
 
-    for my $exit ( qw/init start tcclear started stop stopped clear refresh refreshed restored/ ) {
+    for my $exit ( qw/init start tcclear started stop stopped clear refresh refreshed restored enabled disabled/ ) {
 	emit "\nrun_${exit}_exit() {";
 	push_indent;
 	append_file $exit or emit 'true';
@@ -209,6 +209,8 @@ sub generate_script_2() {
     emit (   '[ -f ${g_confdir}/vardir ] && . ${g_confdir}/vardir' );
     emit ( qq([ -n "\${VARDIR:=$shorewallrc1{VARDIR}}" ]) );
     emit ( qq([ -n "\${VARLIB:=$shorewallrc1{VARLIB}}" ]) );
+    emit ( qq([ -n "\${CONFDIR:=$shorewallrc1{CONFDIR}}" ]) );
+    emit ( qq([ -n "\${SHAREDIR:=$shorewallrc1{SHAREDIR}}" ]) );
 
     emit 'TEMPFILE=';
 
@@ -266,7 +268,8 @@ sub generate_script_2() {
 	emit( '',
 	      'chain_exists DOCKER nat && chain_exists DOCKER && g_docker=Yes',
 	    );
-	emit( 'chain_exists DOCKER-ISOLATION && g_dockernetwork=Yes]' );
+	emit( 'chain_exists DOCKER-INGRESS   && g_dockeringress=Yes' );
+	emit( 'chain_exists DOCKER-ISOLATION && g_dockernetwork=Yes' );
 	emit( '' );
     }
 
@@ -689,6 +692,7 @@ sub compiler {
     set_timestamp( $timestamp );
     set_debug( $debug , $confess );
     #
+    #                                      S H O R E W A L L R C ,
     #                      S H O R E W A L L . C O N F  A N D  C A P A B I L I T I E S
     #
     get_configuration( $export , $update , $annotate , $inline );
@@ -793,13 +797,10 @@ sub compiler {
 	emit '}'; # End of setup_common_rules()
     }
 
-    disable_script;
     #
     #                      R O U T I N G _ A N D _ T R A F F I C _ S H A P I N G
     #         (Writes the setup_routing_and_traffic_shaping() function to the compiled script)
     #
-    enable_script;
-    #
     # Validate the TC files so that the providers will know what interfaces have TC
     #
     my $tcinterfaces = process_tc;

Shorewall/Perl/Shorewall/Config.pm

@@ -30,17 +30,97 @@
 #   into those files (emitters) and finalizing those files (renaming
 #   them to their final name and setting their mode appropriately).
 #
+#   A significant portion of this module is dedicated to the preprocessor:
+#
+#	process_compiler_directive() - processes compiler directives
+#
+#	embedded_shell() - handles embedded shell scripting
+#
+#	embedded_perl() - handles embedded perl scripting
+#
+#	read_a_line() - Reads the next configuration file record to
+#			be passed to the function processing the file.
+#
+#	    - Detects compiler directives and passes then to
+#	      process_compiler_directive() for handling.
+#
+#	    - Handles line continuation
+#
+#	    - Invokes a callback when the first (concatinated) non-directive
+#	      record is read from a file.
+#
+#	    - Conditionally expands variables.
+#
+#	    - Conditionally detects embedded Shell and Perl and passes them
+#	      off to embedded_shell() and embedded_perl() respectively.
+#
+#	    - Conditionally detects and handles [?}INCLUDE directives.
+#
+#	    - Conditionally detects and handles ?SECTION directives.
+#	      File processing functions can supply a callback to be
+#	      called during this processing.
+#
+#   File processing routines may need to open a second (third, fourth, ...)
+#   file while processing the main file (macro and/or action files). Two
+#   functions are provided to make that possible:
+#
+#      push_open() - open a file while leaving the current file open.
+#
+#      pop_open() - close the current file, and make the previous
+#		    file (if any) the current one.
+#
+#   Because this module expands variables, it must be aware of action
+#   parameters.
+#
+#	push_action_params() - populates the %actparams hash and
+#			       returns a reference to the previous
+#			       contents of that hash. The caller is
+#			       expected to store those contents locally.
+#
+#	pop_action_params()  - Restores the %actparams hash from
+#			       the reference returned by
+#			       push_action_params().
+#
+#   The following routines are provided for INLINE PERL within
+#   action bodies:
+#
+#	default_action_params() - called to fill in omitted
+#				  arguments when a DEFAULTS
+#				  line is encountered.
+#
+#	get_action_params() - returns an array of arguments.
+#
+#	setup_audit_action() - helper for A_* actions.
+#
+#	get_action_logging() - returns log level and tag
+#			       from the action's invocation.
+#
+#	get_action_chain_name() - returns chain name.
+#
+#	set_action_name_to_caller() - replace chain name
+#				      with that of invoking
+#				      chain for logging purposes.
+#
+#	set_action_disposition() - set the current action
+#				   disposition for logging purposes.
+#
+#	get_action_disposition() - get the current action disposition.
+#
+#	set_action_param() - set the value of an argument.
+#
 package Shorewall::Config;
 
 use strict;
 use warnings;
 use File::Basename;
 use File::Temp qw/ tempfile tempdir /;
+use File::Glob ':globally';
 use Cwd qw(abs_path getcwd);
 use autouse 'Carp' => qw(longmess confess);
 use Scalar::Util 'reftype';
 use FindBin;
 use Digest::SHA qw(sha1_hex);
+use Errno qw(:POSIX);
 
 our @ISA = qw(Exporter);
 #
@@ -315,7 +395,7 @@ our %renamed = ( AUTO_COMMENT => 'AUTOCOMMENT', BLACKLIST_LOGLEVEL => 'BLACKLIST
 #
 # Config options and global settings that are to be copied to output script
 #
-our @propagateconfig = qw/ DISABLE_IPV6 MODULESDIR MODULE_SUFFIX LOAD_HELPERS_ONLY LOCKFILE SUBSYSLOCK LOG_VERBOSITY RESTART/;
+our @propagateconfig = qw/ DISABLE_IPV6 MODULESDIR LOAD_HELPERS_ONLY LOCKFILE SUBSYSLOCK LOG_VERBOSITY RESTART/;
 #
 # From parsing the capabilities file or detecting capabilities
 #
@@ -413,7 +493,9 @@ our %capdesc = ( NAT_ENABLED     => 'NAT',
                  WAIT_OPTION     => 'iptables --wait option',
                  CPU_FANOUT      => 'NFQUEUE CPU Fanout',
                  NETMAP_TARGET   => 'NETMAP Target',
-
+                 NFLOG_SIZE      => '--nflog-size support',
+		 RESTORE_WAIT_OPTION
+				 => 'iptables-restore --wait option',
 		 AMANDA_HELPER   => 'Amanda Helper',
 		 FTP_HELPER      => 'FTP Helper',
 		 FTP0_HELPER     => 'FTP-0 Helper',
@@ -488,53 +570,55 @@ our %helpers_aliases;
 our %helpers_enabled;
 
 our %config_files = ( #accounting      => 1,
-		      actions          => 1,
-		      blacklist        => 1,
-		      clear            => 1,
-		      conntrack        => 1,
-		      ecn              => 1,
-		      findgw           => 1,
-		      hosts            => 1,
-		      init             => 1,
-		      initdone         => 1,
+		      actions	       => 1,
+		      blacklist	       => 1,
+		      clear	       => 1,
+		      conntrack	       => 1,
+		      ecn	       => 1,
+		      findgw	       => 1,
+		      hosts	       => 1,
+		      init	       => 1,
+		      initdone	       => 1,
 		      interfaces       => 1,
-		      isusable         => 1,
-		      maclist          => 1,
-		      masq             => 1,
-		      nat              => 1,
-		      netmap           => 1,
-		      params           => 1,
-		      policy           => 1,
-		      providers        => 1,
-		      proxyarp         => 1,
-		      refresh          => 1,
-		      refreshed        => 1,
-		      restored         => 1,
-		      rawnat           => 1,
+		      isusable	       => 1,
+		      maclist	       => 1,
+		      mangle	       => 1,
+		      masq	       => 1,
+		      nat	       => 1,
+		      netmap	       => 1,
+		      params	       => 1,
+		      policy	       => 1,
+		      providers	       => 1,
+		      proxyarp	       => 1,
+		      refresh	       => 1,
+		      refreshed	       => 1,
+		      restored	       => 1,
+		      rawnat	       => 1,
 		      route_rules      => 1,
-		      routes           => 1,
+		      routes	       => 1,
 		      routestopped     => 1,
-		      rtrules          => 1,
-		      rules            => 1,
-		      scfilter         => 1,
-		      secmarks         => 1,
-		      start            => 1,
-		      started          => 1,
-		      stop             => 1,
-		      stopped          => 1,
+		      rtrules	       => 1,
+		      rules	       => 1,
+		      scfilter	       => 1,
+		      secmarks	       => 1,
+		      snat	       => 1,
+		      start	       => 1,
+		      started	       => 1,
+		      stop	       => 1,
+		      stopped	       => 1,
 		      stoppedrules     => 1,
-		      tcclasses        => 1,
-		      tcclear          => 1,
-		      tcdevices        => 1,
-		      tcfilters        => 1,
+		      tcclasses	       => 1,
+		      tcclear	       => 1,
+		      tcdevices	       => 1,
+		      tcfilters	       => 1,
 		      tcinterfaces     => 1,
-		      tcpri            => 1,
-		      tcrules          => 1,
-		      tos              => 1,
-		      tunnels          => 1,
-		      zones            => 1 );
+		      tcpri	       => 1,
+		      tcrules	       => 1,
+		      tos	       => 1,
+		      tunnels	       => 1,
+		      zones	       => 1 );
 #
-# Options that involve the the AUDIT target
+# Options that involve the AUDIT target
 #
 our @auditoptions = qw( BLACKLIST_DISPOSITION MACLIST_DISPOSITION TCP_FLAGS_DISPOSITION );
 #
@@ -591,6 +675,7 @@ our $debug;                  # Global debugging flag
 our $confess;                # If true, use Carp to report errors with stack trace.
 
 our $family;                 # Protocol family (4 or 6)
+our $export;                 # True when compiling for export
 our $toolname;               # Name of the tool to use (iptables or iptables6)
 our $toolNAME;               # Tool name in CAPS
 our $product;                # Name of product that will run the generated script
@@ -644,6 +729,7 @@ our %eliminated = ( LOGRATE          => 1,
 		    HIGH_ROUTE_MARKS => 1,
 		    BLACKLISTNEWONLY => 1,
 		    CHAIN_SCRIPTS    => 1,
+                    MODULE_SUFFIX    => 1,
 		  );
 #
 # Variables involved in ?IF, ?ELSE ?ENDIF processing
@@ -703,8 +789,8 @@ sub add_variables( \% );
 #   2. The compiler can run multiple times in the same process so it has to be
 #      able to re-initialize its dependent modules' state.
 #
-sub initialize( $;$$) {
-    ( $family, my ( $shorewallrc, $shorewallrc1 ) ) = @_;
+sub initialize( $;$$$) {
+    ( $family, $export, my ( $shorewallrc, $shorewallrc1 ) ) = @_;
 
     if ( $family == F_IPV4 ) {
 	( $product, $Product, $toolname, $toolNAME ) = qw( shorewall  Shorewall iptables  IPTABLES );
@@ -748,8 +834,8 @@ sub initialize( $;$$) {
 		    TC_SCRIPT               => '',
 		    EXPORT                  => 0,
 		    KLUDGEFREE              => '',
-		    VERSION                 => "5.1.4-Beta1",
-		    CAPVERSION              => 50100 ,
+		    VERSION                 => "5.1.8-Beta1",
+		    CAPVERSION              => 50106 ,
 		    BLACKLIST_LOG_TAG       => '',
 		    RELATED_LOG_TAG         => '',
 		    MACLIST_LOG_TAG         => '',
@@ -844,7 +930,6 @@ sub initialize( $;$$) {
 	  BLACKLIST => undef,
 	  BLACKLISTNEWONLY => undef,
 	  DELAYBLACKLISTLOAD => undef,
-	  MODULE_SUFFIX => undef,
 	  DISABLE_IPV6 => undef,
 	  DYNAMIC_ZONES => undef,
 	  PKTTYPE=> undef,
@@ -908,6 +993,7 @@ sub initialize( $;$$) {
 	  FIREWALL => undef ,
 	  BALANCE_PROVIDERS => undef ,
 	  PERL_HASH_SEED => undef ,
+	  USE_NFLOG_SIZE => undef ,
 	  #
 	  # Packet Disposition
 	  #
@@ -1003,7 +1089,7 @@ sub initialize( $;$$) {
 	       CONNLIMIT_MATCH => undef,
 	       TIME_MATCH => undef,
 	       GOTO_TARGET => undef,
-	       LOG_TARGET => 1,         # Assume that we have it.
+	       LOG_TARGET => undef,
 	       ULOG_TARGET => undef,
 	       NFLOG_TARGET => undef,
 	       LOGMARK_TARGET => undef,
@@ -1041,6 +1127,8 @@ sub initialize( $;$$) {
 	       WAIT_OPTION => undef,
 	       CPU_FANOUT => undef,
 	       NETMAP_TARGET => undef,
+	       NFLOG_SIZE => undef,
+	       RESTORE_WAIT_OPTION => undef,
 
 	       AMANDA_HELPER => undef,
 	       FTP_HELPER => undef,
@@ -1166,7 +1254,7 @@ sub initialize( $;$$) {
     #
     # Process the global shorewallrc file
     #
-    #   Note: The build file executes this function passing only the protocol family
+    #   Note: The build script calls this function passing only the protocol family
     #
     process_shorewallrc( $shorewallrc,
 			 $family == F_IPV4 ? 'shorewall' : 'shorewall6'
@@ -1217,10 +1305,9 @@ sub compiletime() {
 # Create 'currentlineinfo'
 #
 sub currentlineinfo() {
-    my $linenumber = $currentlinenumber || 1;
-
     if ( $currentfilename ) {
-	my $lineinfo = " $currentfilename ";
+	my $linenumber = $currentlinenumber || 1;
+	my $lineinfo   = " $currentfilename ";
 	
 	if ( $linenumber eq 'EOF' ) {
 	    $lineinfo .= '(EOF)'
@@ -1986,6 +2073,7 @@ sub find_file($)
     for my $directory ( @config_path ) {
 	my $file = "$directory$filename";
 	return $file if -f $file;
+	$!{ENOENT} || fatal_error "Unable to access $file: " . $!; 
     }
 
     "$config_path[0]$filename";
@@ -2340,7 +2428,7 @@ sub split_line2( $$;$$$ ) {
 
 	    $inline_matches = $pairs;
 
-	    if ( $columns =~ /^(\s*|.*[^&@%]){(.*)}\s*$/ ) {
+	    if ( $columns =~ /^(\s*|.*[^&@%])\{(.*)\}\s*$/ ) {
 		#
 		# Pairs are enclosed in curly brackets.
 		#
@@ -2356,7 +2444,7 @@ sub split_line2( $$;$$$ ) {
 	    if ( $currline =~ /^\s*INLINE(?:\(.*\)(:.*)?|:.*)?\s/ || $currline =~ /^\s*IP6?TABLES(?:\(.*\)|:.*)?\s/ ) {
 		$inline_matches = $pairs;
 
-		if ( $columns =~ /^(\s*|.*[^&@%]){(.*)}\s*$/ ) {
+		if ( $columns =~ /^(\s*|.*[^&@%])\{(.*)\}\s*$/ ) {
 		    #
 		    # Pairs are enclosed in curly brackets.
 		    #
@@ -2370,7 +2458,7 @@ sub split_line2( $$;$$$ ) {
 	} elsif ( $checkinline ) {
 	    warning_message "This entry needs to be changed before INLINE_MATCHES can be set to Yes";
 	}
-    } elsif ( $currline =~ /^(\s*|.*[^&@%]){(.*)}$/ ) {
+    } elsif ( $currline =~ /^(\s*|.*[^&@%])\{(.*)\}$/ ) {
 	#
 	# Pairs are enclosed in curly brackets.
 	#
@@ -2568,7 +2656,7 @@ sub open_file( $;$$$$ ) {
 	$max_format       = supplied $mf ? $mf : 1;
 	$comments_allowed = supplied $ca ? $ca : 0;
 	$nocomment        = $nc;
-	do_open_file $fname;;
+	do_open_file $fname;
     } else {
 	$ifstack = @ifstack;
 	'';
@@ -4045,7 +4133,7 @@ sub make_mask( $ ) {
     0xffffffff >> ( 32 - $_[0] );
 }
 
-my @suffixes = qw(group range threshold nlgroup cprange qthreshold);
+my @suffixes;
 
 #
 # Validate a log level -- Drop the trailing '!' and translate to numeric value if appropriate"
@@ -4281,7 +4369,7 @@ sub which( $ ) {
 # Load the kernel modules defined in the 'modules' file.
 #
 sub load_kernel_modules( ) {
-    my $moduleloader = which( 'modprobe' ) || ( which 'insmod' );
+    my $moduleloader = which( 'modprobe' ) || which( 'insmod' );
 
     my $modulesdir = $config{MODULESDIR};
 
@@ -4314,25 +4402,20 @@ sub load_kernel_modules( ) {
 
 	close LSMOD;
 
-	$config{MODULE_SUFFIX} = 'o gz xz ko o.gz o.xz ko.gz ko.xz' unless $config{MODULE_SUFFIX};
-
-	my @suffixes = split /\s+/ , $config{MODULE_SUFFIX};
-
+      MODULE:
 	while ( read_a_line( NORMAL_READ ) ) {
 	    fatal_error "Invalid modules file entry" unless ( $currentline =~ /^loadmodule\s+([a-zA-Z]\w*)\s*(.*)$/ );
 	    my ( $module, $arguments ) = ( $1, $2 );
 	    unless ( $loadedmodules{ $module } ) {
-		for my $directory ( @moduledirectories ) {
-		    for my $suffix ( @suffixes ) {
-			my $modulefile = "$directory/$module.$suffix";
-			if ( -f $modulefile ) {
-			    if ( $moduleloader eq 'insmod' ) {
-				system ("insmod $modulefile $arguments" );
-			    } else {
-				system( "modprobe $module $arguments" );
-			    }
-
+		if ( $moduleloader =~ /modprobe$/ ) {
+		    system( "modprobe -q $module $arguments" );
+		    $loadedmodules{ $module } = 1;
+		} else {
+		    for my $directory ( @moduledirectories ) {
+			for my $modulefile ( <$directory/$module.*> ) {
+			    system ("insmod $modulefile $arguments" );
 			    $loadedmodules{ $module } = 1;
+			    next MODULE;
 			}
 		    }
 		}
@@ -4817,6 +4900,10 @@ sub NFLog_Target() {
     qt1( "$iptables $iptablesw -A $sillyname -j NFLOG" );
 }
 
+sub NFLog_Size() {
+    have_capability( 'NFLOG_TARGET' ) && qt1( "$iptables $iptablesw -A $sillyname -j NFLOG --nflog-size 64" );
+}
+
 sub Logmark_Target() {
     qt1( "$iptables $iptablesw -A $sillyname -j LOGMARK" );
 }
@@ -4940,6 +5027,10 @@ sub Cpu_Fanout() {
     have_capability( 'NFQUEUE_TARGET' ) && qt1( "$iptables -A $sillyname -j NFQUEUE --queue-balance 0:3 --queue-cpu-fanout" );
 }
 
+sub Restore_Wait_Option() {
+    length( `${iptables}-restore --wait < /dev/null 2>&1` ) == 0;
+}
+
 our %detect_capability =
     ( ACCOUNT_TARGET =>\&Account_Target,
       AMANDA_HELPER => \&Amanda_Helper,
@@ -4992,6 +5083,7 @@ our %detect_capability =
       LOG_TARGET => \&Log_Target,
       ULOG_TARGET => \&Ulog_Target,
       NFLOG_TARGET => \&NFLog_Target,
+      NFLOG_SIZE => \&NFLog_Size,
       MANGLE_ENABLED => \&Mangle_Enabled,
       MANGLE_FORWARD => \&Mangle_Forward,
       MARK => \&Mark,
@@ -5019,6 +5111,7 @@ our %detect_capability =
       REALM_MATCH => \&Realm_Match,
       REAP_OPTION => \&Reap_Option,
       RECENT_MATCH => \&Recent_Match,
+      RESTORE_WAIT_OPTION => \&Restore_Wait_Option,
       RPFILTER_MATCH => \&RPFilter_Match,
       SANE_HELPER => \&SANE_Helper,
       SANE0_HELPER => \&SANE0_Helper,
@@ -5185,6 +5278,9 @@ sub determine_capabilities() {
 	$capabilities{TCPMSS_TARGET}   = detect_capability( 'TCPMSS_TARGET' );
 	$capabilities{CPU_FANOUT}      = detect_capability( 'CPU_FANOUT' );
 	$capabilities{NETMAP_TARGET}   = detect_capability( 'NETMAP_TARGET' );
+	$capabilities{NFLOG_SIZE}      = detect_capability( 'NFLOG_SIZE' );
+	$capabilities{RESTORE_WAIT_OPTION}
+				       = detect_capability( 'RESTORE_WAIT_OPTION' );
 
 	unless ( have_capability 'CT_TARGET' ) {
 	    $capabilities{HELPER_MATCH} = detect_capability 'HELPER_MATCH';
@@ -5233,7 +5329,13 @@ sub ensure_config_path() {
 	fatal_error "CONFIG_PATH not found in $f" unless $config{CONFIG_PATH};
     }
 
-    @config_path = split /:/, $config{CONFIG_PATH};
+    my $path = $config{CONFIG_PATH};
+
+    my $chop = ( $path =~ s/^:// );
+
+    @config_path = split /:/, $path;
+
+    shift @config_path if $chop && ( $export || $> != 0 );
 
     #
     # To accomodate Cygwin-based compilation, we have separate directories for files whose names
@@ -5362,11 +5464,11 @@ sub update_config_file( $ ) {
 	update_default( 'BALANCE_PROVIDERS', 'Yes' );
     }
 
-    update_default( 'EXPORTMODULES',     'No' );
-    update_default( 'RESTART',           'reload' );
-    update_default( 'PAGER',             $shorewallrc1{DEFAULT_PAGER} );
-    update_default( 'LOGFORMAT',         'Shorewall:%s:%s:' );
-    update_default( 'LOGLIMIT',          '' );
+    update_default( 'EXPORTMODULES',         'No' );
+    update_default( 'RESTART',               'reload' );
+    update_default( 'PAGER',                 $shorewallrc1{DEFAULT_PAGER} );
+    update_default( 'LOGFORMAT',             'Shorewall:%s:%s:' );
+    update_default( 'LOGLIMIT',              '' );
 
     if ( $family == F_IPV4 ) {
 	update_default( 'BLACKLIST_DEFAULT', 'dropBcasts,dropNotSyn,dropInvalid' );
@@ -6051,7 +6153,6 @@ sub get_configuration( $$$$ ) {
     #
     # get_capabilities requires that the true settings of these options be established
     #
-    default 'MODULE_PREFIX', 'ko ko.gz o o.gz gz';
     default_yes_no 'LOAD_HELPERS_ONLY'          , 'Yes';
 
     if ( ! $export && $> == 0 ) {
@@ -6237,7 +6338,7 @@ sub get_configuration( $$$$ ) {
 	$config{LOG_VERBOSITY} = -1;
     }
 
-    default_yes_no 'ADD_IP_ALIASES'             , 'Yes';
+    default_yes_no 'ADD_IP_ALIASES'             , $family == F_IPV4 ? 'Yes' : '';
     default_yes_no 'ADD_SNAT_ALIASES'           , '';
     default_yes_no 'DETECT_DNAT_IPADDRS'        , '';
     default_yes_no 'DETECT_DNAT_IPADDRS'        , '';
@@ -6392,6 +6493,17 @@ sub get_configuration( $$$$ ) {
     default_yes_no 'AUTOMAKE'                   , '';
     default_yes_no 'TRACK_PROVIDERS'            , '';
     default_yes_no 'BALANCE_PROVIDERS'          , $config{USE_DEFAULT_RT} ? 'Yes' : '';
+    default_yes_no 'USE_NFLOG_SIZE'             , '';
+
+    if ( $config{USE_NFLOG_SIZE} ) {
+	if ( have_capability( 'NFLOG_SIZE' ) ) {
+	    @suffixes = qw(group size threshold nlgroup cprange qthreshold);
+	} else {
+	    fatal_error "USE_NFLOG_SIZE=Yes, but the --nflog-size capabiity is not present";
+	}
+    } else {
+	@suffixes = qw(group range threshold nlgroup cprange qthreshold);
+    }
 
     unless ( ( $config{NULL_ROUTE_RFC1918} || '' ) =~ /^(?:blackhole|unreachable|prohibit)$/ ) {
 	default_yes_no( 'NULL_ROUTE_RFC1918', '' );
@@ -6812,6 +6924,12 @@ sub get_configuration( $$$$ ) {
 	}
     }
 
+    if ( supplied( $val = $config{MUTEX_TIMEOUT} ) ) {
+	fatal_error "Invalid value ($val) for MUTEX_TIMEOUT" unless $val && $val =~ /^\d+$/;
+    } else {
+	$config{MUTEX_TIMEOUT} = 60;
+    }
+
     add_variables %config;
 
     while ( my ($var, $val ) = each %renamed ) {

Shorewall/Perl/Shorewall/IPAddrs.pm

@@ -63,7 +63,6 @@ our @EXPORT = ( qw( ALLIPv4
 		  validate_host
 		  validate_range
 		  ip_range_explicit
-		  expand_port_range
 		  allipv4
 		  allipv6
 		  allip
@@ -74,10 +73,6 @@ our @EXPORT = ( qw( ALLIPv4
 		  resolve_proto
 		  resolve_dnsname
 		  proto_name
-		  validate_port
-		  validate_portpair
-		  validate_portpair1
-		  validate_port_list
 		  validate_icmp
 		  validate_icmp6
 		 ) );
@@ -411,114 +406,6 @@ sub proto_name( $ ) {
     $proto =~ /^(\d+)$/ ? $prototoname[ $proto ] || scalar getprotobynumber $proto : $proto
 }
 
-sub validate_port( $$ ) {
-    my ($proto, $port) = @_;
-
-    my $value;
-
-    if ( $port =~ /^(\d+)$/ || $port =~ /^0x/ ) {
-	$port = numeric_value $port;
-	return $port if defined $port && $port && $port <= 65535;
-    } else {
-	$proto = proto_name $proto if $proto =~ /^(\d+)$/;
-	$value = getservbyname( $port, $proto );
-    }
-
-    return $value if defined $value;
-
-    fatal_error "The separator for a port range is ':', not '-' ($port)" if $port =~ /^\d+-\d+$/;
-
-    fatal_error "Invalid/Unknown $proto port/service ($_[1])" unless defined $value;
-}
-
-sub validate_portpair( $$ ) {
-    my ($proto, $portpair) = @_;
-    my $what;
-    my $pair = $portpair;
-    #
-    # Accept '-' as a port-range separator
-    #
-    $pair =~ tr/-/:/ if $pair =~ /^[-0-9]+$/;
-
-    fatal_error "Invalid port range ($portpair)" if $pair =~ tr/:/:/ > 1;
-
-    $pair = "0$pair"       if substr( $pair,  0, 1 ) eq ':';
-    $pair = "${pair}65535" if substr( $pair, -1, 1 ) eq ':';
-
-    my @ports = split /:/, $pair, 2;
-
-    my $protonum = resolve_proto( $proto ) || 0;
-
-    $_ = validate_port( $protonum, $_) for grep $_, @ports;
-
-    if ( @ports == 2 ) {
-	$what = 'port range';
-	fatal_error "Invalid port range ($portpair)" unless $ports[0] < $ports[1];
-    } else {
-	$what = 'port';
-    }
-
-    fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, UDPLITE, SCTP or DCCP" unless
-	defined $protonum && ( $protonum == TCP     ||
-			       $protonum == UDP     ||
-			       $protonum == UDPLITE ||
-			       $protonum == SCTP    ||
-			       $protonum == DCCP );
-    join ':', @ports;
-
-}
-
-sub validate_portpair1( $$ ) {
-    my ($proto, $portpair) = @_;
-    my $what;
-
-    fatal_error "Invalid port range ($portpair)" if $portpair =~ tr/-/-/ > 1;
-
-    $portpair = "1$portpair"       if substr( $portpair,  0, 1 ) eq ':';
-    $portpair = "${portpair}65535" if substr( $portpair, -1, 1 ) eq ':';
-
-    my @ports = split /-/, $portpair, 2;
-
-    my $protonum = resolve_proto( $proto ) || 0;
-
-    $_ = validate_port( $protonum, $_) for grep $_, @ports;
-
-    if ( @ports == 2 ) {
-	$what = 'port range';
-	fatal_error "Invalid port range ($portpair)" unless $ports[0] && $ports[0] < $ports[1];
-    } else {
-	$what = 'port';
-	fatal_error 'Invalid port number (0)' unless $portpair;
-    }
-
-    fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, SCTP or DCCP" unless
-	defined $protonum && ( $protonum == TCP  ||
-			       $protonum == UDP  ||
-			       $protonum == SCTP ||
-			       $protonum == DCCP );
-    join '-', @ports;
-
-}
-
-sub validate_port_list( $$ ) {
-    my $result = '';
-    my ( $proto, $list ) = @_;
-    my @list   = split_list( $list, 'port' );
-
-    if ( @list > 1 && $list =~ /[:-]/ ) {
-	require_capability( 'XMULTIPORT' , 'Port ranges in a port list', '' );
-    }
-
-    $proto = proto_name $proto;
-
-    for ( @list ) {
-	my $value = validate_portpair( $proto , $_ );
-	$result = $result ? join ',', $result, $value : $value;
-    }
-
-    $result;
-}
-
 my %icmp_types = ( any                          => 'any',
 		   'echo-reply'                 => 0,
 		   'destination-unreachable'    => 3,
@@ -572,67 +459,6 @@ sub validate_icmp( $ ) {
     fatal_error "Invalid ICMP Type ($type)"
 }
 
-#
-# Expands a port range into a minimal list of ( port, mask ) pairs.
-# Each port and mask are expressed as 4 hex nibbles without a leading '0x'.
-#
-# Example:
-#
-#       DB<3> @foo = Shorewall::IPAddrs::expand_port_range( 6, '110:' ); print "@foo\n"
-#       006e fffe 0070 fff0 0080 ff80 0100 ff00 0200 fe00 0400 fc00 0800 f800 1000 f000 2000 e000 4000 c000 8000 8000
-#
-sub expand_port_range( $$ ) {
-    my ( $proto, $range ) = @_;
-
-    if ( $range =~ /^(.*):(.*)$/ ) {
-	my ( $first, $last ) = ( $1, $2);
-	my @result;
-
-	fatal_error "Invalid port range ($range)" unless $first ne '' or $last ne '';
-	#
-	# Supply missing first/last port number
-	#
-	$first = 0     if $first eq '';
-	$last  = 65535 if $last eq '';
-	#
-	# Validate the ports
-	#
-	( $first , $last ) = ( validate_port( $proto, $first || 1 ) , validate_port( $proto, $last ) );
-
-	$last++; #Increment last address for limit testing.
-	#
-	# Break the range into groups:
-	#
-	#      - If the first port in the remaining range is odd, then the next group is ( <first>, ffff ).
-	#      - Otherwise, find the largest power of two P that divides the first address such that
-	#        the remaining range has less than or equal to P ports. The next group is
-	#        ( <first> , ~( P-1 ) ).
-	#
-	while ( ( my $ports = ( $last - $first ) ) > 0 ) {
-	    my $mask = 0xffff;         #Mask for current ports in group.
-	    my $y    = 2;              #Next power of two to test
-	    my $z    = 1;              #Number of ports in current group (Previous value of $y).
-
-	    while ( ( ! ( $first % $y ) ) && ( $y <= $ports ) ) {
-		$mask <<= 1;
-		$z  = $y;
-		$y <<= 1;
-	    }
-	    #
-	    #
-	    push @result, sprintf( '%04x', $first ) , sprintf( '%04x' , $mask & 0xffff );
-	    $first += $z;
-	}
-
-	fatal_error "Invalid port range ($range)" unless @result; # first port > last port
-
-	@result;
-
-    } else {
-	( sprintf( '%04x' , validate_port( $proto, $range ) ) , 'ffff' );
-    }
-}
-
 sub valid_6address( $ ) {
     my $address = $_[0];
 

Shorewall/Perl/Shorewall/Misc.pm

@@ -667,6 +667,7 @@ sub create_docker_rules() {
 
     my $chainref = $filter_table->{FORWARD};
 
+    add_commands( $chainref, '[ -n "$g_dockeringress" ] && echo "-A FORWARD -j DOCKER-INGRESS"   >&3', );
     add_commands( $chainref, '[ -n "$g_dockernetwork" ] && echo "-A FORWARD -j DOCKER-ISOLATION" >&3', );
 
     if ( my $dockerref = known_interface('docker0') ) {
@@ -2447,7 +2448,7 @@ sub setup_mss( ) {
     my $clampmss = $config{CLAMPMSS};
     my $option;
     my @match;
-    my $chainref = $filter_table->{FORWARD};
+    my $chainref = $mangle_table->{FORWARD};
 
     if ( $clampmss ) {
 	if ( "\L$clampmss" eq 'yes' ) {

Shorewall/Perl/Shorewall/Nat.pm

@@ -941,7 +941,17 @@ sub handle_nat_rule( $$$$$$$$$$$$$ ) {
 	} else {
 	    $server = $1 if $family == F_IPV6 && $server =~ /^\[(.+)\]$/;
 	    fatal_error "Invalid server IP address ($server)" if $server eq ALLIP || $server eq NILIP;
-	    my @servers = validate_address $server, 1;
+
+	    my @servers;
+
+	    if ( ( $server =~ /^([&%])(.+)/ ) ) {
+		$server = record_runtime_address( $1, $2 );
+		$server =~ s/ $//;
+		@servers = ( $server );
+	    } else {
+		@servers = validate_address $server, 1;
+	    }
+
 	    $server = join ',', @servers;
 	}
 

Shorewall/Perl/Shorewall/Providers.pm

@@ -64,6 +64,8 @@ our @load_interfaces;
 
 our $balancing;
 our $fallback;
+our $balanced_providers;
+our $fallback_providers;
 our $metrics;
 our $first_default_route;
 our $first_fallback_route;
@@ -99,6 +101,8 @@ sub initialize( $ ) {
     %provider_interfaces    = ();
     @load_interfaces        = ();
     $balancing              = 0;
+    $balanced_providers     = 0;
+    $fallback_providers     = 0;
     $fallback               = 0;
     $metrics                = 0;
     $first_default_route    = 1;
@@ -121,7 +125,7 @@ sub initialize( $ ) {
 # Set up marking for 'tracked' interfaces.
 #
 sub setup_route_marking() {
-    my $mask = in_hex( $globals{PROVIDER_MASK} );
+    my $mask   = in_hex( $globals{PROVIDER_MASK} );
     my $exmask = have_capability( 'EXMARK' ) ? "/$mask" : '';
 
     require_capability( $_ , q(The provider 'track' option) , 's' ) for qw/CONNMARK_MATCH CONNMARK/;
@@ -323,7 +327,13 @@ sub balance_default_route( $$$$ ) {
     emit '';
 
     if ( $first_default_route ) {
-	if ( $gateway ) {
+	if ( $balanced_providers == 1 ) {
+	    if ( $gateway ) {
+		emit "DEFAULT_ROUTE=\"via $gateway dev $interface $realm\"";
+	    } else {
+		emit "DEFAULT_ROUTE=\"dev $interface $realm\"";
+	    }
+	} elsif ( $gateway ) {
 	    emit "DEFAULT_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
 	} else {
 	    emit "DEFAULT_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
@@ -347,7 +357,13 @@ sub balance_fallback_route( $$$$ ) {
     emit '';
 
     if ( $first_fallback_route ) {
-	if ( $gateway ) {
+	if ( $fallback_providers == 1 ) {
+	    if ( $gateway ) {
+		emit "FALLBACK_ROUTE=\"via $gateway dev $interface $realm\"";
+	    } else {
+		emit "FALLBACK_ROUTE=\"dev $interface $realm\"";
+	    }
+	} elsif ( $gateway ) {
 	    emit "FALLBACK_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
 	} else {
 	    emit "FALLBACK_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
@@ -486,7 +502,7 @@ sub process_a_provider( $ ) {
 
     if ( ( $gw = lc $gateway ) eq 'detect' ) {
 	fatal_error "Configuring multiple providers through one interface requires an explicit gateway" if $shared;
-	$gateway = get_interface_gateway( $interface, undef, 1 );
+	$gateway = get_interface_gateway( $interface, undef, $number );
 	$gatewaycase = 'detect';
 	set_interface_option( $interface, 'gateway', 'detect' );
     } elsif ( $gw eq 'none' ) {
@@ -496,6 +512,9 @@ sub process_a_provider( $ ) {
 	set_interface_option( $interface, 'gateway', 'none' );
     } elsif ( $gateway && $gateway ne '-' ) {
 	( $gateway, $mac ) = split_host_list( $gateway, 0 );
+
+	$gateway = $1 if $family == F_IPV6 && $gateway =~ /^\[(.+)\]$/;
+
 	validate_address $gateway, 0;
 
 	if ( defined $mac ) {
@@ -586,6 +605,7 @@ sub process_a_provider( $ ) {
 	    } elsif ( $option eq 'nohostroute' ) {
 		$hostroute = 0;
 	    } elsif ( $option eq 'persistent' ) {
+		warning_message "When RESTORE_DEFAULT_ROUTE=Yes, the 'persistent' option may not work as expected" if $config{RESTORE_DEFAULT_ROUTE};
 		$persistent = 1;
 	    } else {
 		fatal_error "Invalid option ($option)";
@@ -593,7 +613,12 @@ sub process_a_provider( $ ) {
 	}
     }
 
-    fatal_error q(The 'balance' and 'fallback' options are mutually exclusive) if $balance && $default;
+    if ( $balance ) {
+	fatal_error q(The 'balance' and 'fallback' options are mutually exclusive) if $default;
+	$balanced_providers++;
+    } elsif ( $default ) {
+	$fallback_providers++;
+    }
 
     if ( $load ) {
 	fatal_error q(The 'balance=<weight>' and 'load=<load-factor>' options are mutually exclusive) if $balance > 1;
@@ -667,7 +692,6 @@ sub process_a_provider( $ ) {
 	    
 	    $pref = 10000 + $number - 1;
 	}
-
     }
 
     unless ( $loose || $pseudo ) {
@@ -826,7 +850,7 @@ sub add_a_provider( $$ ) {
 	    if ( $tproxy ) {
 		emit 'run_ip route add local ' . ALLIP . " dev $physical table $id";
 	    } else {
-		emit "run_ip route add default dev $physical table $id";
+		emit "run_ip route replace default dev $physical table $id";
 	    }
 	}
 
@@ -842,7 +866,7 @@ sub add_a_provider( $$ ) {
 		emit qq(echo "\$IP route del $gateway src $address dev $physical ${mtu}table $id $realm > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing);
 	    }
 
-	    emit( "run_ip route add default via $gateway src $address dev $physical ${mtu}table $id $realm" );
+	    emit( "run_ip route replace default via $gateway src $address dev $physical ${mtu}table $id $realm" );
 	    emit( qq( echo "\$IP route del default via $gateway src $address dev $physical ${mtu}table $id $realm > /dev/null 2>&1"  >> \${VARDIR}/undo_${table}_routing) );
 	}
 
@@ -852,24 +876,24 @@ sub add_a_provider( $$ ) {
 		emit( "run_ip rule add from $address pref 20000 table $id" ,
 		      "echo \"\$IP -$family rule del from $address pref 20000> /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing" );
 	    } else {
-		emit  ( "find_interface_addresses $physical | while read address; do" );
-		emit  ( "    qt \$IP -$family rule del from \$address" );
-		emit  ( "    run_ip rule add from \$address pref 20000 table $id",
+		emit  ( "find_interface_addresses $physical | while read address; do",
+			"    qt \$IP -$family rule del from \$address",
+			"    run_ip rule add from \$address pref 20000 table $id",
 			"    echo \"\$IP -$family rule del from \$address pref 20000 > /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing",
 			'    rulenum=$(($rulenum + 1))',
 			'done'
 		      );
 	    }
+	}
 
-	    if ( @{$providerref->{persistent_routes}} ) {
-		emit '';
-		emit $_ for @{$providers{$table}->{persistent_routes}};
-	    }
+	if ( @{$providerref->{persistent_routes}} ) {
+	    emit '';
+	    emit $_ for @{$providers{$table}->{persistent_routes}};
+	}
 
-	    if ( @{$providerref->{persistent_rules}} ) {
-		emit '';
-		emit $_ for @{$providers{$table}->{persistent_rules}};
-	    }
+	if ( @{$providerref->{persistent_rules}} ) {
+	    emit '';
+	    emit $_ for @{$providers{$table}->{persistent_rules}};
 	}
 
 	pop_indent;
@@ -877,7 +901,6 @@ sub add_a_provider( $$ ) {
 	emit( qq(fi\n),
 	      qq(echo 1 > \${VARDIR}/${physical}_disabled) );
 
-
 	pop_indent;
 
 	emit( "}\n" );
@@ -903,7 +926,7 @@ sub add_a_provider( $$ ) {
 	    if ( $tproxy ) {
 		emit 'run_ip route add local ' . ALLIP . " dev $physical table $id";
 	    } else {
-		emit "run_ip route add default dev $physical table $id";
+		emit "run_ip route replace default dev $physical table $id";
 	    }
 	}
     }
@@ -935,7 +958,7 @@ CEOF
 	my $hexmark = in_hex( $mark );
 	my $mask = have_capability( 'FWMARK_RT_MASK' ) ? '/' . in_hex( $globals{ $tproxy && ! $local ? 'TPROXY_MARK' : 'PROVIDER_MASK' } ) : '';
 
-	emit ( "qt \$IP -$family rule del fwmark ${hexmark}${mask}" ) if $config{DELETE_THEN_ADD};
+	emit ( "qt \$IP -$family rule del fwmark ${hexmark}${mask}" ) if $persistent || $config{DELETE_THEN_ADD};
 
 	emit ( "run_ip rule add fwmark ${hexmark}${mask} pref $pref table $id",
 	       "echo \"\$IP -$family rule del fwmark ${hexmark}${mask} > /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing"
@@ -964,7 +987,7 @@ CEOF
 	    emit qq(run_ip route replace $gateway src $address dev $physical ${mtu}table $id $realm);
 	}
 
-	emit "run_ip route add default via $gateway src $address dev $physical ${mtu}table $id $realm";
+	emit "run_ip route replace default via $gateway src $address dev $physical ${mtu}table $id $realm";
     }
 
     if ( $balance ) {
@@ -976,14 +999,16 @@ CEOF
 	emit '';
 	if ( $gateway ) {
 	    emit qq(run_ip route replace $gateway/32 dev $physical table $id) if $hostroute;
-	    emit qq(run_ip route add default via $gateway src $address dev $physical table $id metric $number);
+	    emit qq(run_ip route replace default via $gateway src $address dev $physical table $id metric $number);
 	    emit qq(echo "\$IP -$family route del default via $gateway table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing);
 	    emit qq(echo "\$IP -4 route del $gateway/32 dev $physical table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing) if $family == F_IPV4;
 	} else {
-	    emit qq(run_ip route add default table $id dev $physical metric $number);
+	    emit qq(run_ip route replace default table $id dev $physical metric $number);
 	    emit qq(echo "\$IP -$family route del default dev $physical table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing);
 	}
 
+	emit( 'g_fallback=Yes' ) if $persistent;
+
 	$metrics = 1;
     }
 
@@ -1005,12 +1030,13 @@ CEOF
 	} elsif ( ! $noautosrc ) {
 	    if ( $shared ) {
 		if ( $persistent ) {
-		    emit( qq(if ! egrep -q "^2000:[[:space:]]+from $address lookup $id"; then),
+		    emit( qq(if ! egrep -q "^20000:[[:space:]]+from $address lookup $id"; then),
+			  qq(    qt \$IP -$family rule del from $address pref 20000),
 			  qq(    run_ip rule add from $address pref 20000 table $id),
 			  qq(    echo "\$IP -$family rule del from $address pref 20000> /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing ),
 			  qq(fi) );
 		} else {
-		    emit  "qt \$IP -$family rule del from $address" if $config{DELETE_THEN_ADD};
+		    emit  "qt \$IP -$family rule del from $address" if $persistent || $config{DELETE_THEN_ADD};
 		    emit( "run_ip rule add from $address pref 20000 table $id" ,
 			  "echo \"\$IP -$family rule del from $address pref 20000> /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing" );
 		}
@@ -1067,7 +1093,21 @@ CEOF
 	    emit( "setup_${dev}_tc" ) if $tcdevices->{$interface};
 	}
 
-	emit( qq(rm -f \${VARDIR}/${physical}_disabled) );
+	emit( qq(rm -f \${VARDIR}/${physical}_disabled),
+	      $pseudo ? "run_enabled_exit ${physical} ${interface}" : "run_enabled_exit ${physical} ${interface} ${table}"
+	    );
+
+	if ( ! $pseudo && $config{USE_DEFAULT_RT} && $config{RESTORE_DEFAULT_ROUTE} ) {
+	    emit  ( '#',
+		    '# We now have a viable default route in the \'default\' table so delete any default routes in the main table',
+		    '#',
+		    'while qt \$IP -$family route del default table ' . MAIN_TABLE . '; do',
+		    '    true',
+		    'done',
+		    ''
+		);
+	}
+
 	emit_started_message( '', 2, $pseudo, $table, $number );
 
 	if ( get_interface_option( $interface, 'used_address_variable' ) || get_interface_option( $interface, 'used_gateway_variable' ) ) {
@@ -1212,12 +1252,14 @@ CEOF
 		  "qt \$TC qdisc del dev $physical ingress\n" ) if $tcdevices->{$interface};
 	}
 
-	emit( "echo 1 > \${VARDIR}/${physical}.status" );
+	emit( "echo 1 > \${VARDIR}/${physical}.status",
+	      $pseudo ? "run_disabled_exit ${physical} ${interface}" : "run_disabled_exit ${physical} ${interface} ${table}"
+	    );
 
 	if ( $pseudo ) {
-	    emit( "progress_message2 \"   Optional Interface $table stopped\"" );
+	    emit( "progress_message2 \"Optional Interface $table stopped\"" );
 	} else {
-	    emit( "progress_message2 \"   Provider $table ($number) stopped\"" );
+	    emit( "progress_message2 \"Provider $table ($number) stopped\"" );
 	}
 
 	pop_indent;
@@ -1318,7 +1360,7 @@ sub add_an_rtrule1( $$$$$ ) {
 
     $priority = "pref $priority";
 
-    push @{$providerref->{rules}}, "qt \$IP -$family rule del $source ${dest}${mark} $priority" if $config{DELETE_THEN_ADD};
+    push @{$providerref->{rules}}, "qt \$IP -$family rule del $source ${dest}${mark} $priority" if $persistent || $config{DELETE_THEN_ADD};
     push @{$providerref->{rules}}, "run_ip rule add $source ${dest}${mark} $priority table $id";
 
     if ( $persistent ) {
@@ -1416,22 +1458,22 @@ sub add_a_route( ) {
 
     if ( $gateway ne '-' ) {
 	if ( $device ne '-' ) {
-	    push @$routes,            qq(run_ip route add $dest via $gateway dev $physical table $id);
-	    push @$persistent_routes, qq(run_ip route add $dest via $gateway dev $physical table $id) if $persistent;
+	    push @$routes,            qq(run_ip route replace $dest via $gateway dev $physical table $id);
+	    push @$persistent_routes, qq(run_ip route replace $dest via $gateway dev $physical table $id) if $persistent;
 	    push @$routes,             q(echo "$IP ) . qq(-$family route del $dest via $gateway dev $physical table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${provider}_routing) if $number >= DEFAULT_TABLE;
 	} elsif ( $null ) {
-	    push @$routes,            qq(run_ip route add $null $dest table $id);
-	    push @$persistent_routes, qq(run_ip route add $null $dest table $id) if $persistent;
+	    push @$routes,            qq(run_ip route replace $null $dest table $id);
+	    push @$persistent_routes, qq(run_ip route replace $null $dest table $id) if $persistent;
 	    push @$routes,             q(echo "$IP ) . qq(-$family route del $null $dest table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${provider}_routing) if $number >= DEFAULT_TABLE;
 	} else {
-	    push @$routes,            qq(run_ip route add $dest via $gateway table $id);
-	    push @$persistent_routes, qq(run_ip route add $dest via $gateway table $id) if $persistent;
+	    push @$routes,            qq(run_ip route replace $dest via $gateway table $id);
+	    push @$persistent_routes, qq(run_ip route replace $dest via $gateway table $id) if $persistent;
 	    push @$routes,             q(echo "$IP ) . qq(-$family route del $dest via $gateway table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${provider}_routing) if $number >= DEFAULT_TABLE;
 	}
     } else {
 	fatal_error "You must specify a device for this route" unless $physical;
-	push @$routes,            qq(run_ip route add $dest dev $physical table $id);
-	push @$persistent_routes, qq(run_ip route add $dest dev $physical table $id) if $persistent;
+	push @$routes,            qq(run_ip route replace $dest dev $physical table $id);
+	push @$persistent_routes, qq(run_ip route replace $dest dev $physical table $id) if $persistent;
 	push @$routes,             q(echo "$IP ) . qq(-$family route del $dest dev $physical table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${provider}_routing) if $number >= DEFAULT_TABLE;
     }
 
@@ -1533,10 +1575,10 @@ sub finish_providers() {
 	    emit  ( "    run_ip route replace default scope global table $table \$DEFAULT_ROUTE" );
 	} else {
 	    emit  ( "    if echo \$DEFAULT_ROUTE | grep -q 'nexthop.+nexthop'; then",
-		    "        qt \$IP -6 route delete default scope global table $table \$DEFAULT_ROUTE",
-		    "        run_ip -6 route add default scope global table $table \$DEFAULT_ROUTE",
+		    "        while qt \$IP -6 route delete default table $table; do true; done",
+		    "        run_ip route add default scope global table $table \$DEFAULT_ROUTE",
 		    '    else',
-		    "        run_ip -6 route replace default scope global table $table \$DEFAULT_ROUTE",
+		    "        run_ip route replace default scope global table $table \$DEFAULT_ROUTE",
 		    '    fi',
 		    '' );
 	}
@@ -1554,7 +1596,7 @@ sub finish_providers() {
 		'    error_message "WARNING: No Default route added (all \'balance\' providers are down)"' );
 
 	if ( $config{RESTORE_DEFAULT_ROUTE} ) {
-	    emit qq(    restore_default_route $config{USE_DEFAULT_RT} && error_message "NOTICE: Default route restored")
+	    emit qq(    [ -z "\${FALLBACK_ROUTE}\${g_fallback}" ] && restore_default_route $config{USE_DEFAULT_RT} && error_message "NOTICE: Default route restored")
 	} else {
 	    emit qq(    qt \$IP -$family route del default table $table && error_message "WARNING: Default route deleted from table $table");
 	}
@@ -1581,7 +1623,7 @@ sub finish_providers() {
 	}
 
 	emit ( '#',
-	       '# Delete any routes in the \'balance\' table',
+	       '# Delete any default routes with metric 0 in the \'balance\' table',
 	       '#',
 	       "while qt \$IP -$family route del default table $balance; do",
 	       '    true',
@@ -1596,7 +1638,7 @@ sub finish_providers() {
 	if ( $family == F_IPV4 ) {
 	    emit( "    run_ip route replace default scope global table $default \$FALLBACK_ROUTE" );
 	} else {
-	    emit( "    run_ip route delete default scope global table $default \$FALLBACK_ROUTE" );
+	    emit( "    while qt \$IP -6 route delete default table $default; do true; done" );
 	    emit( "    run_ip route add default scope global table $default \$FALLBACK_ROUTE" );
 	}
 
@@ -1609,7 +1651,10 @@ sub finish_providers() {
 	      'fi',
 	      '' );
     } elsif ( $config{USE_DEFAULT_RT} ) {
-	emit( "delete_default_routes $default",
+	emit( '#',
+	      '# No balanced fallback routes - delete any routes with metric 0 from the \'default\' table',
+	      '#',
+	      "delete_default_routes $default",
 	      ''
 	    );
     }
@@ -1654,7 +1699,7 @@ sub process_providers( $ ) {
     }
 
     if ( $providers ) {
-	fatal_error q(Either all 'fallback' providers must specify a weight or non of them can specify a weight) if $fallback && $metrics;
+	fatal_error q(Either all 'fallback' providers must specify a weight or none of them can specify a weight) if $fallback && $metrics;
 
 	my $fn = open_file( 'route_rules' );
 
@@ -1893,7 +1938,6 @@ sub setup_providers() {
 
 	emit "fi\n";
     }
-
 }
 
 #

Shorewall/Perl/Shorewall/Rules.pm

@@ -96,7 +96,7 @@ use constant { NULL_SECTION          => 0x00,
 	       INVALID_SECTION       => 0x10,
 	       UNTRACKED_SECTION     => 0x20,
 	       NEW_SECTION           => 0x40,
-	       DEFAULTACTION_SECTION => 0x80 };
+	       POLICYACTION_SECTION  => 0x80 };
 #
 # Number of elements in the action tuple
 #
@@ -216,6 +216,10 @@ our %statetable;
 # Tracks which of the state match actions (action.Invalid, etc.) that is currently being expanded
 #
 our $statematch;
+#
+# Remembers NAT-oriented columns from top-level action invocations
+#
+our %nat_columns;
 
 #
 # Action/Inline options
@@ -384,6 +388,8 @@ sub initialize( $ ) {
 	                  );
     }
 
+    %nat_columns = ( dest => '-', proto => '-', ports => '-' );
+
     ############################################################################
     # Initialize variables moved from the Tc module in Shorewall 5.0.7         #
     ############################################################################
@@ -391,7 +397,7 @@ sub initialize( $ ) {
     %tcdevices = ();
     %tcclasses = ();
     $sticky    = 0;
-    $divertref = 0;    
+    $divertref = 0;
 }
 
 #
@@ -921,6 +927,28 @@ sub process_policies()
 #
 sub process_inline ($$$$$$$$$$$$$$$$$$$$$$);
 
+#
+# Determine the protocol to be used in the jump to the passed action
+#
+sub determine_action_protocol( $$ ) {
+    my ( $action, $proto ) = @_;
+
+    if ( my $actionproto = $actions{$action}{proto} ) {
+	if ( $proto eq '-' ) {
+	    $proto = $actionproto;
+	} else {
+	    if ( defined( my $protonum = resolve_proto( $proto ) ) ) {
+		fatal_error( "The $action action is only usable with " . proto_name( $actionproto ) ) unless $actionproto == $protonum;
+		$proto = $protonum;
+	    } else {
+		fatal_error( "Unknown protocol ($proto)" );
+	    }
+	}
+    }
+
+    $proto;
+}
+
 sub add_policy_rules( $$$$$ ) {
     my ( $chainref , $target, $loglevel, $pactions, $dropmulticast ) = @_;
 
@@ -936,12 +964,16 @@ sub add_policy_rules( $$$$$ ) {
 
 	    if ( ( $targets{$action} || 0 ) & ACTION ) {
 		#
-		# Default action is a regular action -- jump to the action chain
+		# Policy action is a regular action -- jump to the action chain
 		#
-		add_ijump $chainref, j => use_policy_action( $paction, $chainref->{name} );
+		if ( ( my $proto = determine_action_protocol( $action, '-' ) ) ne '-' ) {
+		    add_ijump( $chainref, j => use_policy_action( $paction, $chainref->{name} ), p => $proto );
+		} else {
+		    add_ijump $chainref, j => use_policy_action( $paction, $chainref->{name} );
+		}
 	    } else {
 		#
-		# Default action is an inline 
+		# Policy action is an inline 
 		#
 		( undef, my $level )   = split /:/, $paction, 2;
 		( $action, my $param ) = get_target_param( $action );
@@ -1256,7 +1288,7 @@ sub finish_chain_section ($$$) {
 	if ( $chain1ref->{is_policy} ) {
 	    if ( $chain1ref->{synparams} ) {
 		my $synchainref = ensure_chain 'filter', syn_flood_chain $chain1ref;
-		if ( $section == DEFAULTACTION_SECTION ) {
+		if ( $section == POLICYACTION_SECTION ) {
 		    if ( $chain1ref->{policy} =~ /^(ACCEPT|CONTINUE|QUEUE|NFQUEUE)/ ) {
 			add_ijump $chain1ref, j => $synchainref, p => 'tcp --syn';
 		    }
@@ -1292,7 +1324,7 @@ sub ensure_rules_chain( $ )
     $chainref = new_rules_chain( $chain ) unless $chainref;
 
     unless ( $chainref->{referenced} ) {
-	if ( $section & ( NEW_SECTION | DEFAULTACTION_SECTION ) ) {
+	if ( $section & ( NEW_SECTION | POLICYACTION_SECTION ) ) {
 	    finish_chain_section $chainref , $chainref, 'ESTABLISHED,RELATED,INVALID,UNTRACKED';
 	} elsif ( $section == UNTRACKED_SECTION ) {
 	    finish_chain_section $chainref , $chainref, 'ESTABLISHED,RELATED,INVALID';
@@ -1411,13 +1443,13 @@ sub external_name( $ ) {
 #
 # Define an Action
 #
-sub new_action( $$$$$ ) {
+sub new_action( $$$$$$ ) {
 
-    my ( $action , $type, $options , $actionfile , $state ) = @_;
+    my ( $action , $type, $options , $actionfile , $state, $proto ) = @_;
 
     fatal_error "Invalid action name($action)" if reserved_name( $action );
 
-    $actions{$action} = { file => $actionfile, actchain => '' , type => $type, options => $options , state => $state };
+    $actions{$action} = { file => $actionfile, actchain => '' , type => $type, options => $options , state => $state, proto => $proto };
 
     $targets{$action} = $type;
 }
@@ -1635,7 +1667,7 @@ sub merge_inline_source_dest( $$ ) {
 		    return join( ':', $invocation, $body );
 		}
 	    } else {
-		fatal_error 'Interface names cannot appear in the DEST column within an action body' if $body =~ /:\[|:\+|/;
+		fatal_error 'Interface names cannot appear in the DEST column within an action body' if $body =~ /:\[|:\+/;
 
 		if ( $invocation =~ /:\[|:\+/ ) {
 		    $invocation =~ s/:.*//;
@@ -1652,6 +1684,19 @@ sub merge_inline_source_dest( $$ ) {
     $body || '';
 }
 
+#
+# This one is used by perl_action_helper()
+#
+sub merge_action_column( $$ ) {
+    my ( $body, $invocation ) = @_;
+
+    if ( supplied( $body ) && $body ne '-' ) {
+	$body;
+    } else {
+	$invocation;
+    }
+}
+
 sub merge_macro_column( $$ ) {
     my ( $body, $invocation ) = @_;
 
@@ -1732,6 +1777,14 @@ sub process_action(\$\$$) {
 	fatal_error "Action $action may not be used in the mangle file"  if $chainref->{table} eq 'mangle';
     }
 
+    if ( $type & NAT_TABLE ) {
+	fatal_error "Action $action may only be used in the snat file" unless $chainref->{table} eq 'nat';
+    } else {
+	fatal_error "Action $action may not be used in the snat file"  if $chainref->{table} eq 'nat';
+    }
+
+    $param = $1 if $param =~ /^.*\|(.*)$/; #Strip interface name off of the parameters
+
     my $actionfile = $actionref->{file};
 
     progress_message2 "$doing $actionfile for chain $chainref->{name}...";
@@ -1920,7 +1973,7 @@ sub process_action(\$\$$) {
 
 	    for my $proto (split_list( $protos, 'Protocol' ) ) {
 		process_snat1( $chainref,
-			       $action,
+			       $nolog ? $action : merge_levels( join(':', @actparams{'chain','loglevel','logtag'}), $action ),
 			       $source,
 			       $dest,
 			       $proto,
@@ -2022,9 +2075,10 @@ sub process_actions() {
 	    my $opts = $type == INLINE ? NOLOG_OPT : 0;
 
 	    my $state = '';
+	    my $proto = 0;
 
 	    if ( $action =~ /:/ ) {
-		warning_message 'Default Actions are now specified in /etc/shorewall/shorewall.conf';
+		warning_message 'Policy Actions are now specified in /etc/shorewall/shorewall.conf';
 		$action =~ s/:.*$//;
 	    }
 
@@ -2038,6 +2092,9 @@ sub process_actions() {
 			} else {
 			    fatal_error( q(The 'state' option is reserved for use in the actions.std file) );
 			}
+		    } elsif ( /^proto=(.+)$/ ) {
+			fatal_error "Unknown Protocol ($1)" unless defined( $proto = resolve_proto( $1 ) );
+			fatal_error "A protocol may not be specified on the REJECT_ACTION ($action)" if $action eq $config{REJECT_ACTION};
 		    } else {
 			fatal_error "Invalid option ($_)" unless $options{$_};
 			$opts |= $options{$_};
@@ -2047,9 +2104,9 @@ sub process_actions() {
 		unless ( $type & INLINE ) {
 		    $type = INLINE if $opts & INLINE_OPT;
 		}
-	    }
 
-	    fatal_error "Conflicting OPTIONS ($options)" if ( $opts & NOINLINE_OPT && $type == INLINE ) || ( $opts & INLINE_OPT && $opts & BUILTIN_OPT );
+		fatal_error "Conflicting OPTIONS ($options)" if ( $opts & NOINLINE_OPT && $type == INLINE ) || ( $opts & INLINE_OPT && $opts & BUILTIN_OPT );
+	    }
 
 	    if ( my $actiontype = $targets{$action} ) {
 		if ( ( $actiontype & ACTION ) && ( $type == INLINE ) ) {
@@ -2058,6 +2115,11 @@ sub process_actions() {
 			next;
 		    }
 
+		    $proto = $actions{$action}{proto} unless $proto;
+		    delete $actions{$action};
+		    delete $targets{$action};
+		} elsif ( ( $actiontype & INLINE ) && ( $type == ACTION ) && $opts & NOINLINE_OPT ) {
+		    $proto = $actions{$action}{proto} unless $proto;
 		    delete $actions{$action};
 		    delete $targets{$action};
 		} else {
@@ -2067,6 +2129,8 @@ sub process_actions() {
 	    }
 
 	    if ( $opts & BUILTIN_OPT ) {
+		warning_message( "The 'proto' option has no effect when specified on a builtin action" ) if $proto;
+
 		my $actiontype = USERBUILTIN | OPTIONS;
 		$actiontype   |= MANGLE_TABLE if $opts & MANGLE_OPT;
 		$actiontype   |= RAW_TABLE    if $opts & RAW_OPT;
@@ -2099,7 +2163,7 @@ sub process_actions() {
 
 		fatal_error "Missing Action File ($actionfile)" unless -f $actionfile;
 
-		new_action ( $action, $type, $opts, $actionfile , $state );
+		new_action ( $action, $type, $opts, $actionfile , $state , $proto );
 	    }
 	}
     }
@@ -2137,7 +2201,7 @@ sub process_reject_action() {
     #
     # This gets called very early in the compilation process so we fake the section
     #
-    $section = DEFAULTACTION_SECTION;
+    $section = POLICYACTION_SECTION;
 
     if ( ( $targets{$action} || 0 ) == ACTION ) {
 	add_ijump $rejectref, j => use_policy_action( $action, $rejectref->{name} );
@@ -2471,7 +2535,7 @@ sub verify_audit($;$$) {
 # the target is a macro, the macro is expanded and this function is called recursively for each rule in the expansion.
 # Similarly, if a new action tuple is encountered, this function is called recursively for each rule in the action
 # body. In this latter case, a reference to the tuple's chain is passed in the first ($chainref) argument. A chain
-# reference is also passed when rules are being generated during processing of a macro used as a default action.
+# reference is also passed when rules are being generated during processing of a macro used as a policy action.
 #
 
 sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
@@ -2510,6 +2574,8 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
     my $exceptionrule = '';
     my $usergenerated;
     my $prerule = '';
+    my %save_nat_columns = %nat_columns;
+    my $generated = 0;
     #
     # Subroutine for handling MARK and CONNMARK.
     #
@@ -2591,32 +2657,30 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 
 	$current_param = $param unless $param eq '' || $param eq 'PARAM';
 
-	my $generated = process_macro( $basictarget,
-				       $chainref,
-				       $rule . $raw_matches,
-				       $matches1,
-				       $target,
-				       $current_param,
-				       $source,
-				       $dest,
-				       $proto,
-				       $ports,
-				       $sports,
-				       $origdest,
-				       $ratelimit,
-				       $user,
-				       $mark,
-				       $connlimit,
-				       $time,
-				       $headers,
-				       $condition,
-				       $helper,
-				       $wildcard );
+	$generated = process_macro( $basictarget,
+				    $chainref,
+				    $rule . $raw_matches,
+				    $matches1,
+				    $target,
+				    $current_param,
+				    $source,
+				    $dest,
+				    $proto,
+				    $ports,
+				    $sports,
+				    $origdest,
+				    $ratelimit,
+				    $user,
+				    $mark,
+				    $connlimit,
+				    $time,
+				    $headers,
+				    $condition,
+				    $helper,
+				    $wildcard );
 
 	$macro_nest_level--;
-
-	return $generated;
-
+	goto EXIT;
     } elsif ( $actiontype & NFQ ) {
 	$action = handle_nfqueue( $param,
 				  1 # Allow 'bypass'
@@ -2688,6 +2752,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 
 	      REDIRECT => sub () {
 		  my $z = $actiontype & NATONLY ? '' : firewall_zone;
+
 		  if ( $dest eq '-' ) {
 		      if ( $family == F_IPV4 ) {
 			  $dest = ( $inchain ) ? '' : join( '', $z, '::' , $ports =~ /[:,]/ ? '' : $ports );
@@ -2816,6 +2881,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	    }
 	}
     }
+
     #
     # Isolate and validate source and destination zones
     #
@@ -2909,7 +2975,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	#
 	if ( $destref->{type} & BPORT ) {
 	    unless ( $sourceref->{bridge} eq $destref->{bridge} || single_interface( $sourcezone ) eq $destref->{bridge} ) {
-		return 0 if $wildcard;
+		goto EXIT if $wildcard;
 		fatal_error "Rules with a DESTINATION Bridge Port zone must have a SOURCE zone on the same bridge";
 	    }
 	}
@@ -2924,7 +2990,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	my $policy = $chainref->{policy};
 
 	if ( $policy eq 'NONE' ) {
-	    return 0 if $wildcard;
+	    goto EXIT if $wildcard;
 	    fatal_error "Rules may not override a NONE policy";
 	}
 	#
@@ -2933,9 +2999,9 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	if ( $optimize == 1 && $section == NEW_SECTION ) {
 	    my $loglevel = $filter_table->{$chainref->{policychain}}{loglevel};
 	    if ( $loglevel ne '' ) {
-		return 0 if $target eq "${policy}:${loglevel}";
+		goto EXIT if $target eq "${policy}:${loglevel}";
 	    } else {
-		return 0 if $basictarget eq $policy;
+		goto EXIT if $basictarget eq $policy;
 	    }
 	}
 	#
@@ -2980,6 +3046,25 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
     my $actionchain; # Name of the action chain
 
     if ( $actiontype & ACTION ) {
+	#
+	# Verify action 'proto', if any
+	#
+	$proto = determine_action_protocol( $basictarget, $proto );
+	#
+	# Save NAT-oriented column contents
+	#
+	@nat_columns{'dest', 'proto', 'ports' } = ( $dest,
+						    $proto eq '-' ? $nat_columns{proto} : $proto,
+						    $ports eq '-' ? $nat_columns{ports} : $ports );
+	#
+	# Push the current column array onto the column stack
+	#
+        my @savecolumns = @columns;
+	#
+	# And store the (modified) columns into the columns array for use by perl_action[_tcp]_helper. We
+	# only need the NAT-oriented columns
+	#
+	@columns = ( undef , undef, $dest, $proto, $ports);
 	#
 	# Handle 'section' option
 	#
@@ -3023,6 +3108,8 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	}
 
 	$action = $basictarget; # Remove params, if any, from $action.
+
+	@columns = @savecolumns;
     } elsif ( $actiontype & INLINE ) {
 	#
 	# process_inline() will call process_rule() recursively for each rule in the action body
@@ -3039,34 +3126,34 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 
 	$actionresult = 0;
 
-	my $generated = process_inline( $basictarget,
-					$chainref,
-					$prerule . $rule,
-					$matches1 . $raw_matches,
-					$loglevel,
-					$target,
-					$param,
-					$source,
-					$dest,
-					$proto,
-					$ports,
-					$sports,
-					$origdest,
-					$ratelimit,
-					$user,
-					$mark,
-					$connlimit,
-					$time,
-					$headers,
-					$condition,
-					$helper,
-					$wildcard ) || $actionresult;
+	$generated = process_inline( $basictarget,
+				     $chainref,
+				     $prerule . $rule,
+				     $matches1 . $raw_matches,
+				     $loglevel,
+				     $target,
+				     $param,
+				     $source,
+				     $dest,
+				     $proto,
+				     $ports,
+				     $sports,
+				     $origdest,
+				     $ratelimit,
+				     $user,
+				     $mark,
+				     $connlimit,
+				     $time,
+				     $headers,
+				     $condition,
+				     $helper,
+				     $wildcard ) || $actionresult;
 
 	( $actionresult, @columns ) = @$savecolumns;;
 
 	$macro_nest_level--;
 
-	return $generated;
+	goto EXIT;
     }
     #
     # Generate Fixed part of the rule
@@ -3113,7 +3200,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 		     );
     }
 
-    unless ( $section & ( NEW_SECTION | DEFAULTACTION_SECTION ) ||
+    unless ( $section & ( NEW_SECTION | POLICYACTION_SECTION ) ||
 	     $inaction ||
 	     $blacklist ||
 	     $basictarget eq 'dropInvalid' ) {
@@ -3249,10 +3336,17 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 		     $log_action ,
 		     $exceptionrule ,
 		     $usergenerated && ! $loglevel )
-	    unless unreachable_warning( $wildcard || $section == DEFAULTACTION_SECTION, $chainref );
+	    unless unreachable_warning( $wildcard || $section == POLICYACTION_SECTION, $chainref );
     }
 
-    return 1;
+    $generated = 1;
+
+  EXIT:
+    {
+      %nat_columns = %save_nat_columns;
+    }
+
+    return $generated;
 }
 
 
@@ -3320,7 +3414,7 @@ sub check_state( $ ) {
 	}
     }
 
-    if ( $section & ( NEW_SECTION | DEFAULTACTION_SECTION ) ) {
+    if ( $section & ( NEW_SECTION | POLICYACTION_SECTION ) ) {
 	if ( $state eq 'NEW' ) {
 	    #
 	    # If an INVALID or UNTRACKED rule would be emitted then we must include the state match
@@ -3406,27 +3500,60 @@ sub perl_action_helper($$;$$) {
 				 '',                              # CurrentParam
 				 @columns );
     } else {
-	$result = process_rule( $chainref,
-				$matches,
-				$matches1,
-				merge_target( $actions{$action}, $target ),
-				'',                               # Current Param
-				'-',                              # Source
-				'-',                              # Dest
-				'-',                              # Proto
-				'-',                              # Port(s)
-				'-',                              # Source Port(s)
-				'-',                              # Original Dest
-				'-',                              # Rate Limit
-				'-',                              # User
-				'-',                              # Mark
-				'-',                              # Connlimit
-				'-',                              # Time
-				'-',                              # Headers,
-				'-',                              # condition,
-				'-',                              # helper,
-				0,                                # Wildcard
-			      );
+	if ( ( $targets{$target} || 0 ) & NATRULE ) {
+	    $result = process_rule( $chainref,
+				    $matches,
+				    $matches1,
+				    merge_target( $actions{$action}, $target ),
+				    '',                               # Current Param
+				    '-',                              # Source
+				    merge_action_column(              # Dest
+					$columns[2],			      
+					$nat_columns{dest}
+				    ),
+				    merge_action_column(              #Proto
+					$columns[3],
+					$nat_columns{proto}
+				    ),
+				    merge_action_column(              #Ports
+					$columns[4],
+					$nat_columns{ports}),
+				    '-',                              # Source Port(s)
+				    '-',                              # Original Dest
+				    '-',                              # Rate Limit
+				    '-',                              # User
+				    '-',                              # Mark
+				    '-',                              # Connlimit
+				    '-',                              # Time
+				    '-',                              # Headers,
+				    '-',                              # condition,
+				    '-',                              # helper,
+				    0,                                # Wildcard
+		);
+	} else {
+	    $result = process_rule( $chainref,
+				    $matches,
+				    $matches1,
+				    merge_target( $actions{$action}, $target ),
+				    '',                               # Current Param
+				    '-',                              # Source
+				    '-',                              # Dest
+				    '-',                              # Proto
+				    '-',                              # Port(s)
+				    '-',                              # Source Port(s)
+				    '-',                              # Original Dest
+				    '-',                              # Rate Limit
+				    '-',                              # User
+				    '-',                              # Mark
+				    '-',                              # Connlimit
+				    '-',                              # Time
+				    '-',                              # Headers,
+				    '-',                              # condition,
+				    '-',                              # helper,
+				    0,                                # Wildcard
+		);
+	}
+
 	allow_optimize( $chainref );
     }
     #
@@ -3492,7 +3619,8 @@ sub perl_action_tcp_helper($$) {
 				    '-',                              # condition,
 				    '-',                              # helper,
 				    0,                                # Wildcard
-				  );
+		                  );
+
 	    allow_optimize( $chainref );
 	}
 	#
@@ -3827,7 +3955,7 @@ sub process_rules() {
     #
     # No need to finish the NEW section since no rules need to be generated
     #
-    $section = $next_section = DEFAULTACTION_SECTION;
+    $section = $next_section = POLICYACTION_SECTION;
 }
 
 sub process_mangle_inline( $$$$$$$$$$$$$$$$$$$$ ) {
@@ -4063,10 +4191,10 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 		expand_rule( $chainref,
 			     $restriction,
 			     $prerule ,
+			     do_proto( $proto, $ports, $sports ) .
 			     $match .
 			     do_user( $user ) .
-			     do_test( $testval, $globals{TC_MASK} ) .
-			     do_test( $testval, $globals{TC_MASK} ) .
+			     do_test( $testval, $mask ) .
 			     do_length( $length ) .
 			     do_tos( $tos ) .
 			     do_connbytes( $connbytes ) .
@@ -4074,6 +4202,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 			     do_headers( $headers ) .
 			     do_probability( $probability ) .
 			     do_dscp( $dscp ) .
+			     do_time( $time ) .
 			     do_condition( $condition, $chainref->{name} ) .
 			     state_match( $state ) .
 			     $raw_matches ,
@@ -4509,6 +4638,52 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 	    },
 	},
 
+	TCPMSS     => {
+	    defaultchain   => FORWARD,
+	    allowedchains  => FORWARD | POSTROUTING,
+	    minparams      => 0,
+	    maxparams      => 2,
+	    function       => sub () {
+		if ( $proto eq '-' ) {
+		    $proto = TCP;
+		} else {
+		    fatal_error 'TCPMSS only valid with TCP' unless $proto eq '6' || $proto eq 'tcp';
+		}
+
+		$target   = 'TCPMSS ';
+		$matches .= '--tcp-flags SYN,RST SYN ';
+
+		if ( supplied $params ) {
+		    my ( $mss, $ipsec ) = split /,/, $params;
+
+		    if ( supplied $mss ) {
+			if ( $mss eq 'pmtu' ) {
+			    $target .= '--clamp-mss-to-pmtu';
+			} else {
+			    my $num = numeric_value $mss;
+			    fatal_error "Invalid MSS ($mss)" unless defined $num && $num >= 500 && $num < 65534;
+			    $target .= "--set-mss $num";
+			}
+		    } else {
+			$target .= '--clamp-mss-to-pmtu';
+		    }
+		    if ( supplied $ipsec && $ipsec ne 'all' ) {
+			if ( $ipsec eq '-' || $ipsec eq 'none' ) {
+			    $matches .= '-m policy --pol none --dir out ';
+			} elsif ( $ipsec eq 'ipsec' ) {
+			    $matches .= '-m policy --pol ipsec --dir out ';
+			} else {
+			    fatal_error "Invalid ipsec parameter ($ipsec)";
+			}
+
+			require_capability 'POLICY_MATCH', "The $ipsec ipsec option", 's';
+		    }
+		} else {
+		    $target .= '--clamp-mss-to-pmtu';
+		}
+	    },
+	},
+
 	TOS        => {
 	    defaultchain   => 0,
 	    allowedchains  => PREROUTING | FORWARD | OUTPUT | POSTROUTING,
@@ -4532,8 +4707,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 		my ( $port, $ip, $bad );
 
 		if ( $params ) {
-		    ( $port, $ip, $bad ) = split_list $params, 'Parameter';
-		    fatal_error "Invalid TPROXY specification( TPROXY($params) )" if defined $bad;
+		    ( $port, $ip ) = split /,/, $params, 2;
 		}
 
 		my $mark = in_hex( $globals{TPROXY_MARK} ) . '/' . in_hex( $globals{TPROXY_MARK} );
@@ -4600,6 +4774,10 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$$ ) {
 	function          => sub() {
 	    fatal_error( qq(Action $cmd may not be used in the mangle file) ) unless $actiontype & MANGLE_TABLE;
 	    #
+	    # Verify action 'proto', if any
+	    #
+	    $proto = determine_action_protocol( $cmd, $proto );
+	    #
 	    # Create the action:level:tag:param tuple.
 	    #
 	    my $normalized_target = normalize_action( $cmd, '', $params );
@@ -5125,18 +5303,23 @@ sub process_mangle_rule( $ ) {
     }
 }
 
-sub process_snat_inline( $$$$$$$$$$$$$ ) {
-    my ($inline, $chainref, $params, $source, $dest, $protos, $ports, $ipsec, $mark, $user, $condition, $origdest, $probability ) = @_;
+sub process_snat_inline( $$$$$$$$$$$$$$ ) {
+    my ($inline, $chainref, $params, $loglevel, $source, $dest, $protos, $ports, $ipsec, $mark, $user, $condition, $origdest, $probability ) = @_;
 
+    my ( $level,
+	 $tag )    = split( ':', $loglevel, 2 );
     my $oldparms   = push_action_params( $inline,
 					 $chainref,
 					 $params,
-					  'none',
-					 '' ,
+					 supplied $level ? $level : 'none',
+					 defined  $tag   ? $tag   : '' ,
 					 $chainref->{name} );
 
-    my $inlinefile = $actions{$inline}{file};
-    my $matches    = fetch_inline_matches;
+    my $actionref    = $actions{$inline};
+    my $inlinefile   = $actionref->{file};
+    my $options      = $actionref->{options};
+    my $nolog        = $options & NOLOG_OPT;
+    my $matches      = fetch_inline_matches;
 
     progress_message "..Expanding inline action $inlinefile...";
 
@@ -5170,6 +5353,8 @@ sub process_snat_inline( $$$$$$$$$$$$$ ) {
 	    next;
 	}
 
+	$maction = merge_levels( join(':', @actparams{'chain','loglevel','logtag'}), $maction ) unless $nolog;
+
 	$msource = $source if $msource eq '-';
 
 	if ( $mdest eq '-' ) {
@@ -5214,7 +5399,7 @@ sub process_snat_inline( $$$$$$$$$$$$$ ) {
 # Process a record in the snat file
 #
 sub process_snat1( $$$$$$$$$$$$ ) {
-    my ( $chainref, $action, $source, $dest, $proto, $ports, $ipsec, $mark, $user, $condition, $origdest, $probability ) = @_;
+    my ( $chainref, $origaction, $source, $dest, $proto, $ports, $ipsec, $mark, $user, $condition, $origdest, $probability ) = @_;
 
     my $inchain;
     my $inaction;
@@ -5231,6 +5416,9 @@ sub process_snat1( $$$$$$$$$$$$ ) {
     my $actiontype;
     my $interfaces;
     my $normalized_action;
+    my ( $action, $loglevel ) = split_action( $origaction );
+    my $logaction;
+    my $param;
 
     if ( $action =~ /^MASQUERADE(\+)?(?:\((.+)\))?$/ ) {
 	$target     = 'MASQUERADE';
@@ -5239,6 +5427,7 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 	$addresses  = ( $2 || '' );
 	$options    = 'random' if $addresses =~ s/:?random$//;
 	$add_snat_aliases = '';
+	$logaction  = 'MASQ';
     } elsif ( $action =~ /^SNAT(\+)?\((.+)\)$/ ) {
 	$pre_nat    = $1;
 	$addresses  = $2;
@@ -5247,13 +5436,16 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 	$options   .= ':persistent' if $addresses =~ s/:persistent//;
 	$options   .= ':random'     if $addresses =~ s/:random//;
 	$options   =~ s/^://;
+	$logaction = 'SNAT';
     } elsif ( $action =~ /^CONTINUE(\+)?$/ ) {
 	$add_snat_aliases = 0;
 	$actiontype = $builtin_target{$target = 'RETURN'};
 	$pre_nat    = $1;
+	$logaction = 'RETURN';
     } elsif ( $action eq 'MASQUERADE' ) {
 	$actiontype = $builtin_target{$target = 'MASQUERADE'};
 	$add_snat_aliases = '';
+	$logaction  = 'MASQ';
     } else {
 	( $target , $params ) = get_target_param1( $action );
 
@@ -5261,11 +5453,24 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 
 	$actiontype = ( $targets{$target} || 0 );
 
-	fatal_error "Invalid ACTION ($action)" unless $actiontype & ( ACTION | INLINE );
+	if ( $actiontype & LOGRULE ) {
+	    $logaction = 'LOG';
+	    if ( $target eq 'LOG' ) {
+		fatal_error 'LOG requires a log level' unless supplied $loglevel;
+	    } else {
+		$target   = "$target($params)";
+		validate_level( $action );
+		$loglevel = supplied $loglevel ? join( ':', $target, $loglevel ) : $target;
+		$target   = 'LOG';
+	    }
+	} else {
+	    fatal_error "Invalid ACTION ($action)" unless $actiontype & ( ACTION | INLINE );
+	    $logaction = '';
+	}
     }
 
     if ( $inchain = defined $chainref ) {
-	( $inaction, undef, $interfaces, undef, undef ) = split /:/, $normalized_action = $chainref->{action}, 5 if $chainref->{action};
+	( $inaction, undef,undef,undef,$param ) = split( /:/, $normalized_action = $chainref->{action}) if $chainref->{action};
 	fatal_error q('+' is not allowed within an action body) if $pre_nat;
     }
     #
@@ -5273,6 +5478,8 @@ sub process_snat1( $$$$$$$$$$$$ ) {
     #
     if ( $inaction ) {
 	$destnets = $dest;
+	assert( $param =~ /^(.*)\|/ );
+	$interfaces=$1;
     } elsif ( $family == F_IPV4 ) {
 	if ( $dest =~ /^([^:]+)::([^:]*)$/ ) {
 	    $add_snat_aliases = 0;
@@ -5286,7 +5493,7 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 	    $interfaces = $1;
 	} elsif ( $dest =~ /^([^:]+):([^:]*)$/ ) {
 	    my ( $one, $two ) = ( $1, $2 );
-	    if ( $2 =~ /\./ || $2 =~ /^%/ ) {
+	    if ( $2 =~ /\./ || $2 =~ /^[+%!]/ ) {
 		$interfaces = $one;
 		$destnets = $two;
 	    } else {
@@ -5514,6 +5721,7 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 	    process_snat_inline( $target,
 				 $chainref,
 				 $params,
+				 $loglevel,
 				 $source,
 				 supplied $destnets && $destnets ne '-' ? $inaction ? $destnets : join( ':', $interface, $destnets ) : $inaction ? '-' : $interface,
 				 $proto,
@@ -5528,10 +5736,14 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 	    if ( $actiontype & ACTION ) {
 		fatal_error( qq(Action $target may not be used in the snat file) ) unless $actiontype & NAT_TABLE;
 		#
+		# Verify action 'proto', if any
+		#
+		$proto = determine_action_protocol( $target, $proto );
+		#
 		# Create the action:level:tag:param tuple. Since we don't allow logging out of nat POSTROUTING, we store
 		# the interface name in the log tag
 		#
-		my $normalized_target = normalize_action( $target, "none:$interface", $params );
+		my $normalized_target = normalize_action( $target, "$loglevel", "$interface|$params" );
 		fatal_error( "Action $target invoked Recursively (" .  join( '->', map( external_name( $_ ), @actionstack , $normalized_target ) ) . ')' ) if $active{$target};
 
 		my $ref = use_action( 'nat', $normalized_target );
@@ -5541,9 +5753,6 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 		    # First reference to this tuple - process_action may modify both $normalized_target and $ref!!!
 		    #
 		    process_action( $normalized_target, $ref, $chainref->{name} );
-		    #
-		    # Capture the name of the action chain
-		    #
 		} else {
 		    #
 		    # We've seen this tuple before
@@ -5552,6 +5761,12 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 		}
 
 		$target = $ref->{name};
+
+		if ( $actions{$target}{options} & LOGJUMP_OPT ) {
+		    $logaction = $target;
+		} else {
+		    $loglevel = '';
+		}
 	    } else {
 		for my $option ( split_list2( $options , 'option' ) ) {
 		    if ( $option eq 'random' ) {
@@ -5580,8 +5795,8 @@ sub process_snat1( $$$$$$$$$$$$ ) {
 			 $destnets ,
 			 $origdest ,
 			 $target ,
-			 '' ,
-			 '' ,
+			 $loglevel ,
+			 $logaction ,
 			 $exceptionrule ,
 			 '' )
 		unless unreachable_warning( 0, $chainref );
@@ -5642,15 +5857,23 @@ sub process_snat( )
 sub setup_snat( $ ) # Convert masq->snat if true
 {
     my $fn;
+    my $have_masq;
 
-    convert_masq() if $_[0];
-
-    if ( $fn = open_file( 'masq', 1, 1 ) ) {
+    if ( $_[0] ) {
+	convert_masq();
+    } elsif ( $fn = open_file( 'masq', 1, 1 ) ) {
 	first_entry( sub { progress_message2 "$doing $fn..."; require_capability 'NAT_ENABLED' , "a non-empty masq file" , 's'; } );
-	process_one_masq(0) while read_a_line( NORMAL_READ );
-    } elsif ( $fn = open_file( 'snat', 1, 1 ) ) {
-	first_entry( sub { progress_message2 "$doing $fn..."; require_capability 'NAT_ENABLED' , "a non-empty snat file" , 's'; } );
-	process_snat while read_a_line( NORMAL_READ );
+	process_one_masq(0), $have_masq = 1 while read_a_line( NORMAL_READ );
+    }
+
+    unless ( $have_masq ) {
+	#
+	# Masq file empty or didn't exist
+	#
+	if ( $fn = open_file( 'snat', 1, 1 ) ) {
+	    first_entry( sub { progress_message2 "$doing $fn..."; require_capability 'NAT_ENABLED' , "a non-empty snat file" , 's'; } );
+	    process_snat while read_a_line( NORMAL_READ );
+	}
     }
 }
 

Shorewall/Perl/Shorewall/Tc.pm

@@ -225,11 +225,11 @@ sub handle_in_bandwidth( $$$ ) {
     if ( have_capability 'BASIC_FILTER' ) {
 	if ( $in_rate ) {
 	    emit( "run_tc filter add dev $physical parent ffff: protocol all prio 10 basic \\",
-		  "    police mpu 64 drop rate ${in_rate}kbit burst $in_burst\n" );
+		  "    police mpu 64 rate ${in_rate}kbit burst $in_burst drop\n" );
 	} else {
 	    emit( "run_tc filter add dev $physical parent ffff: protocol all prio 10 \\",
 		  "    estimator $in_interval $in_decay basic \\",
-		  "    police drop avrate ${in_avrate}kbit\n" );
+		  "    police avrate ${in_avrate}kbit drop\n" );
 	}
     } else {
 	emit( "run_tc filter add dev $physical parent ffff: protocol all prio 10 \\" ,
@@ -1434,7 +1434,7 @@ sub process_tc_filter2( $$$$$$$$$ ) {
 
 	    while ( @sportlist ) {
 		my ( $sport, $smask ) = ( shift @sportlist, shift @sportlist );
-		$rule .= "\\\n   cmp\\( u16 at 0 layer 2 mask $smask eq 0x$sport \\)";
+		$rule .= "\\\n   cmp\\( u16 at 0 layer 2 mask 0x$smask eq 0x$sport \\)";
 		$rule .= ' or' if @sportlist;
 	    }
 

Shorewall/Perl/Shorewall/Zones.pm

@@ -90,9 +90,8 @@ our @EXPORT = ( qw( NOTHING
 		    interface_is_optional
 		    interface_is_required
 		    find_interfaces_by_option
-		    find_interfaces_by_option1
 		    get_interface_option
-                    get_interface_origin
+		    get_interface_origin
 		    interface_has_option
 		    set_interface_option
 		    interface_zone
@@ -114,31 +113,31 @@ our $VERSION = 'MODULEVERSION';
 #     @zones contains the ordered list of zones with sub-zones appearing before their parents.
 #
 #     %zones{<zone1> => {name =>       <name>,
-#                        type =>       <zone type>       FIREWALL, IP, IPSEC, BPORT;
-#                        complex =>    0|1
-#                        super   =>    0|1
-#                        options =>    { in_out  => < policy match string >
-#                                        in      => < policy match string >
-#                                        out     => < policy match string >
-#                                      }
-#                        parents =>    [ <parents> ]      Parents, Children and interfaces are listed by name
-#                        children =>   [ <children> ]
-#                        interfaces => { <interfaces1> => 1, ... }
-#                        bridge =>     <bridge>
-#                        hosts { <type> } => [ { <interface1> => { ipsec   => 'ipsec'|'none'
-#                                                                  options => { <option1> => <value1>
-#                                                                               ...
-#                                                                             }
-#                                                                  hosts   => [ <net1> , <net2> , ... ]
-#                                                                  exclusions => [ <net1>, <net2>, ... ]
-#                                                                  origin   => <where defined>
-#                                                                }
-#                                                <interface2> => ...
-#                                              }
-#                                            ]
-#                       }
-#             <zone2> => ...
-#           }
+#			 type =>       <zone type>	 FIREWALL, IP, IPSEC, BPORT;
+#			 complex =>    0|1
+#			 super	 =>    0|1
+#			 options =>    { in_out	 => < policy match string >
+#					 in	 => < policy match string >
+#					 out	 => < policy match string >
+#				       }
+#			 parents =>    [ <parents> ]	  Parents, Children and interfaces are listed by name
+#			 children =>   [ <children> ]
+#			 interfaces => { <interfaces1> => 1, ... }
+#			 bridge =>     <bridge>
+#			 hosts { <type> } => [ { <interface1> => { ipsec   => 'ipsec'|'none'
+#								   options => { <option1> => <value1>
+#										...
+#									      }
+#								   hosts   => [ <net1> , <net2> , ... ]
+#								   exclusions => [ <net1>, <net2>, ... ]
+#								   origin   => <where defined>
+#								 }
+#						 <interface2> => ...
+#					       }
+#					     ]
+#			}
+#	      <zone2> => ...
+#	    }
 #
 #     $firewall_zone names the firewall zone.
 #
@@ -160,27 +159,27 @@ our %reservedName = ( all => 1,
 #
 #     @interfaces lists the interface names in the order that they appear in the interfaces file.
 #
-#     %interfaces { <interface1> => { name        => <name of interface>
-#                                     root        => <name without trailing '+'>
-#                                     options     => { port => undef|1
-#                                                    { <option1> } => <val1> ,          #See %validinterfaceoptions
-#                                                      ...
-#                                                    }
-#                                     zone        => <zone name>
-#                                     multizone   => undef|1   #More than one zone interfaces through this interface
-#                                     nets        => <number of nets in interface/hosts records referring to this interface>
-#                                     bridge      => <bridge name> # Same as ->{name} if not a bridge port.
-#                                     ports       => <number of port on this bridge>
-#                                     ipsec       => undef|1 # Has an ipsec host group
-#                                     broadcasts  => 'none', 'detect' or [ <addr1>, <addr2>, ... ]
-#                                     number      => <ordinal position in the interfaces file>
-#                                     physical    => <physical interface name>
-#                                     base        => <shell variable base representing this interface>
-#                                     wildcard    => undef|1 # Wildcard Name
-#                                     zones       => { zone1 => 1, ... }
-#                                     origin      => <where defined>
-#                                   }
-#                 }
+#     %interfaces { <interface1> => { name	  => <name of interface>
+#				      root	  => <name without trailing '+'>
+#				      options	  => { port => undef|1
+#						     { <option1> } => <val1> ,		#See %validinterfaceoptions
+#						       ...
+#						     }
+#				      zone	  => <zone name>
+#				      multizone	  => undef|1   #More than one zone interfaces through this interface
+#				      nets	  => <number of nets in interface/hosts records referring to this interface>
+#				      bridge	  => <bridge name> # Same as ->{name} if not a bridge port.
+#				      ports	  => <number of port on this bridge>
+#				      ipsec	  => undef|1 # Has an ipsec host group
+#				      broadcasts  => 'none', 'detect' or [ <addr1>, <addr2>, ... ]
+#				      number	  => <ordinal position in the interfaces file>
+#				      physical	  => <physical interface name>
+#				      base	  => <shell variable base representing this interface>
+#				      wildcard	  => undef|1 # Wildcard Name
+#				      zones	  => { zone1 => 1, ... }
+#				      origin	  => <where defined>
+#				    }
+#		  }
 #
 #    The purpose of the 'base' member is to ensure that the base names associated with the physical interfaces are assigned in
 #    the same order as the interfaces are encountered in the configuration files.
@@ -253,6 +252,17 @@ use constant { NO_UPDOWN   => 1,
 
 our %validinterfaceoptions;
 
+our %procinterfaceoptions=( accept_ra   => 1,
+			    arp_filter  => 1,
+			    arp_ignore  => 1,
+			    forward     => 1,
+			    logmartians => 1,
+			    proxyarp    => 1,
+			    proxyndp    => 1,
+			    routefilter => 1,
+			    sourceroute => 1,
+			  );
+
 our %prohibitunmanaged = (
 			  blacklist      => 1,
 			  bridge         => 1,
@@ -317,7 +327,7 @@ sub initialize( $$ ) {
     %mapbase = ();
     %mapbase1 = ();
     $baseseq = 0;
-    $minroot = 0;
+    $minroot = undef;
     $loopback_interface = '';
 
     %validzoneoptions = ( mss            => NUMERIC,
@@ -339,7 +349,7 @@ sub initialize( $$ ) {
 				  arp_ignore  => ENUM_IF_OPTION,
 				  blacklist   => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				  bridge      => SIMPLE_IF_OPTION,
-				  dbl         => ENUM_IF_OPTION,
+				  dbl         => ENUM_IF_OPTION   + IF_OPTION_WILDOK,
 				  destonly    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				  detectnets  => OBSOLETE_IF_OPTION,
 				  dhcp        => SIMPLE_IF_OPTION,
@@ -363,9 +373,9 @@ sub initialize( $$ ) {
 				  upnp        => SIMPLE_IF_OPTION,
 				  upnpclient  => SIMPLE_IF_OPTION,
 				  mss         => NUMERIC_IF_OPTION + IF_OPTION_WILDOK,
-				  physical    => STRING_IF_OPTION  + IF_OPTION_HOST,
+				  physical    => STRING_IF_OPTION  + IF_OPTION_HOST + IF_OPTION_WILDOK,
 				  unmanaged   => SIMPLE_IF_OPTION,
-				  wait        => NUMERIC_IF_OPTION + IF_OPTION_WILDOK,
+				  wait        => NUMERIC_IF_OPTION,
 				 );
 	%validhostoptions = (
 			     blacklist => 1,
@@ -390,7 +400,7 @@ sub initialize( $$ ) {
 	%validinterfaceoptions = (  accept_ra   => NUMERIC_IF_OPTION,
 				    blacklist   => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    bridge      => SIMPLE_IF_OPTION,
-				    dbl         => ENUM_IF_OPTION,
+				    dbl         => ENUM_IF_OPTION   + IF_OPTION_WILDOK,
 				    destonly    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    dhcp        => SIMPLE_IF_OPTION,
 				    ignore      => NUMERIC_IF_OPTION + IF_OPTION_WILDOK,
@@ -402,18 +412,18 @@ sub initialize( $$ ) {
 				    optional    => SIMPLE_IF_OPTION,
 				    proxyndp    => BINARY_IF_OPTION,
 				    required    => SIMPLE_IF_OPTION,
-				    routeback   => BINARY_IF_OPTION + IF_OPTION_ZONEONLY + IF_OPTION_HOST + IF_OPTION_VSERVER,
+				    routeback   => BINARY_IF_OPTION + IF_OPTION_ZONEONLY + IF_OPTION_HOST + IF_OPTION_VSERVER + IF_OPTION_WILDOK,
 				    rpfilter    => SIMPLE_IF_OPTION,
 				    sfilter     => IPLIST_IF_OPTION,
 				    sourceroute => BINARY_IF_OPTION,
 				    tcpflags    => BINARY_IF_OPTION + IF_OPTION_HOST,
 				    mss         => NUMERIC_IF_OPTION + IF_OPTION_WILDOK,
 				    forward     => BINARY_IF_OPTION,
-				    physical    => STRING_IF_OPTION + IF_OPTION_HOST,
+				    physical    => STRING_IF_OPTION + IF_OPTION_HOST + IF_OPTION_WILDOK,
 				    unmanaged   => SIMPLE_IF_OPTION,
 				    upnp        => SIMPLE_IF_OPTION,
 				    upnpclient  => SIMPLE_IF_OPTION,
-				    wait        => NUMERIC_IF_OPTION + IF_OPTION_WILDOK,
+				    wait        => NUMERIC_IF_OPTION,
 				 );
 	%validhostoptions = (
 			     blacklist => 1,
@@ -701,6 +711,40 @@ sub haveipseczones() {
     0;
 }
 
+#
+# Returns 1 if the two interfaces passed are related
+#
+sub interface_match( $$ ) {
+    my ( $piface, $ciface ) = @_;
+
+    return 1 if $piface eq $ciface;
+
+    my ( $pifaceref, $cifaceref ) = @interfaces{$piface, $ciface};
+
+    return 1 if $piface eq $cifaceref->{bridge};
+    return 1 if $ciface eq $pifaceref->{bridge};
+
+    if ( defined $minroot ) {
+	if ( $piface =~ /\+$/ ) {
+	    my $root    = $pifaceref->{root};
+	    my $rlength = length( $root );
+	    while ( length( $ciface ) >= $rlength ) {
+		return 1 if $ciface eq $root;
+		chop $ciface;
+	    }
+	} elsif ( $ciface =~ /\+$/ ) {
+	    my $root    = $cifaceref->{root};
+	    my $rlength = length( $root );
+	    while ( length( $piface ) >= $rlength ) {
+		return 1 if $piface eq $root;
+		chop $piface;
+	    }
+	}
+    }
+
+    0;
+}
+
 #
 # Report about zones.
 #
@@ -738,7 +782,7 @@ sub zone_report()
 			    if ( $family == F_IPV4 ) {
 				progress_message_nocompress "      $iref->{physical}:$grouplist";
 			    } else {
-				progress_message_nocompress "      $iref->{physical}:<$grouplist>";
+				progress_message_nocompress "      $iref->{physical}:[$grouplist]";
 			    }
 			    $printed = 1;
 			}
@@ -747,6 +791,17 @@ sub zone_report()
 	    }
 	}
 
+      PARENT:
+	for my $p ( @{$zoneref->{parents}} ) {
+	    for my $pi ( keys ( %{$zones{$p}{interfaces}} ) ) {
+		for my $ci ( keys( %{$zoneref->{interfaces}} ) ) {
+		    next PARENT if interface_match( $pi, $ci );
+		}
+	    }
+
+	    warning_message "Zone $zone is defined as a sub-zone of $p, yet the two zones have no interface in common";
+	}
+
 	unless ( $printed ) {
 	    fatal_error "No bridge has been associated with zone $zone" if $type & BPORT && ! $zoneref->{bridge};
 	    warning_message "*** $zone is an EMPTY ZONE ***" unless $type == FIREWALL;
@@ -1159,15 +1214,16 @@ sub process_interface( $$ ) {
     }
 
     my $wildcard = 0;
+    my $physwild = 0;
     my $root;
 
     if ( $interface =~ /\+$/ ) {
-	$wildcard = 1;
+	$wildcard = $physwild = 1; # Default physical name is the logical name
 	$root = substr( $interface, 0, -1 );
 	$roots{$root} = $interface;
 	my $len = length $root;
 
-	if ( $minroot ) {
+	if ( defined $minroot ) {
 	    $minroot = $len if $minroot > $len;
 	} else {
 	    $minroot = $len;
@@ -1213,8 +1269,6 @@ sub process_interface( $$ ) {
 	my %hostoptions = ( dynamic => 0 );
 
 	for my $option (split_list1 $options, 'option' ) {
-	    next if $option eq '-';
-
 	    ( $option, my $value ) = split /=/, $option;
 
 	    fatal_error "Invalid Interface option ($option)" unless my $type = $validinterfaceoptions{$option};
@@ -1251,7 +1305,6 @@ sub process_interface( $$ ) {
 	    } elsif ( $type == BINARY_IF_OPTION ) {
 		$value = 1 unless defined $value;
 		fatal_error "Option value for '$option' must be 0 or 1" unless ( $value eq '0' || $value eq '1' );
-		fatal_error "The '$option' option may not be used with a wild-card interface name" if $wildcard && ! $type && IF_OPTION_WILDOK;
 		$options{$option} = $value;
 		$hostoptions{$option} = $value if $hostopt;
 	    } elsif ( $type == ENUM_IF_OPTION ) {
@@ -1275,7 +1328,6 @@ sub process_interface( $$ ) {
 		    assert( 0 );
 		}
 	    } elsif ( $type == NUMERIC_IF_OPTION ) {
-		fatal_error "The '$option' option may not be specified on a wildcard interface" if $wildcard && ! $type && IF_OPTION_WILDOK;
 		$value = $defaultinterfaceoptions{$option} unless defined $value;
 		fatal_error "The '$option' option requires a value" unless defined $value;
 		my $numval = numeric_value $value;
@@ -1327,7 +1379,9 @@ sub process_interface( $$ ) {
 
 		    fatal_error "Duplicate physical interface name ($value)" if ( $interfaces{$value} && ! $port );
 
-		    fatal_error "The type of 'physical' name ($value) doesn't match the type of interface name ($interface)" if $wildcard && ! $value =~ /\+$/;
+		    $physwild = ( $value =~ /\+$/ );
+		    fatal_error "The type of 'physical' name ($value) doesn't match the type of interface name ($interface)" if $wildcard && ! $physwild;
+
 		    $physical = $value;
 		} else {
 		    assert(0);
@@ -1355,6 +1409,14 @@ sub process_interface( $$ ) {
 	    $options{ignore} = 0;
 	}
 
+	for my $option ( keys %options ) {
+	    if ( $root ) {
+		warning_message( "The '$option' option is ignored when used with a wildcard physical name" ) if $physwild && $procinterfaceoptions{$option};
+	    } else {
+		warning_message( "The '$option' option is ignored when used with interface name '+'" ) unless $validinterfaceoptions{$option} & IF_OPTION_WILDOK;
+	    }
+	}
+
 	if ( $netsref eq 'dynamic' ) {
 	    my $ipset = $family == F_IPV4 ? "${zone}" : "6_${zone}";
 	    $ipset = join( '_', $ipset, var_base1( $physical ) ) unless $zoneref->{options}{in_out}{dynamic_shared};	    
@@ -1413,6 +1475,7 @@ sub process_interface( $$ ) {
 						   zones      => {},
 						   origin     => shortlineinfo( '' ),
 						   wildcard   => $wildcard,
+						   physwild   => $physwild, # Currently unused
 					         };
 
     $interfaces{$physical} = $interfaceref if $physical ne $interface;
@@ -1571,13 +1634,11 @@ sub known_interface($)
 
     my $iface = $interface;
 
-    if ( $minroot ) {
+    if ( defined $minroot ) {
 	#
 	# We have wildcard interfaces -- see if this interface matches one of their roots
 	#
-	while ( length $iface > $minroot ) {
-	    chop $iface;
-
+	while ( length $iface >= $minroot ) {
 	    if ( my $i = $roots{$iface} ) {
 		#
 		# Found one
@@ -1599,6 +1660,8 @@ sub known_interface($)
 		                              };
 		return $interfaceref;
 	    }
+
+	    chop $iface;
 	}
     }
 
@@ -1812,7 +1875,8 @@ sub find_interfaces_by_option( $;$ ) {
     for my $interface ( @interfaces ) {
 	my $interfaceref = $interfaces{$interface};
 
-	next unless $interfaceref->{root};
+	next unless $interfaceref->{root};                                   # Don't return '+' interface
+	next if $procinterfaceoptions{$option} && $interfaceref->{physwild}; # Ignore /proc options on wildcard interface
 
 	my $optionsref = $interfaceref->{options};
 	if ( $nonzero ) {
@@ -1827,35 +1891,6 @@ sub find_interfaces_by_option( $;$ ) {
     \@ints;
 }
 
-#
-# Returns reference to array of interfaces with the passed option. Unlike the preceding function, this one:
-#
-# - All entries in %interfaces are searched.
-# - Returns a two-element list; the second element indicates whether any members of the list have wildcard physical names
-#
-sub find_interfaces_by_option1( $ ) {
-    my $option = $_[0];
-    my @ints = ();
-    my $wild = 0;
-
-    for my $interface ( @interfaces ) {
-	my $interfaceref = $interfaces{$interface};
-
-	next unless defined $interfaceref->{physical};
-
-	my $optionsref = $interfaceref->{options};
-
-	if ( $optionsref && defined $optionsref->{$option} ) {
-	    $wild ||= $interfaceref->{wildcard};
-	    push @ints , $interface
-	}
-    }
-
-    return unless defined wantarray;
-
-    wantarray ? ( \@ints, $wild ) : \@ints;
-}
-
 #
 # Return the value of an option for an interface
 #

Shorewall/Perl/lib.runtime

@@ -1,4 +1,4 @@
-#   (c) 1999-2016 - Tom Eastep (teastep@shorewall.net)
+#   (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	This program is part of Shorewall.
 #
@@ -369,7 +369,7 @@ replace_default_route() # $1 = USE_DEFAULT_RT
 delete_default_routes() # $1 = table number
 {
     $IP -$g_family route ls table $1 | grep -F default | grep -vF metric | while read route; do
-	qt $IP -$g_family route del $route
+	qt $IP -$g_family route del $route table $1
     done
 } 
 
@@ -421,7 +421,7 @@ restore_default_route() # $1 = USE_DEFAULT_RT
 conditionally_flush_conntrack() {
 
     if [ -n "$g_purge" ]; then
-	if [ -n $(mywhich conntrack) ]; then
+	if [ -n "$(mywhich conntrack)" ]; then
             conntrack -F
 	else
             error_message "WARNING: The '-p' option requires the conntrack utility which does not appear to be installed on this system"
@@ -899,7 +899,7 @@ detect_dynamic_gateway() { # $1 = interface
 #
 # Detect the gateway through an interface
 #
-detect_gateway() # $1 = interface
+detect_gateway() # $1 = interface $2 = table number
 {
     local interface
     interface=$1
@@ -912,6 +912,8 @@ detect_gateway() # $1 = interface
     # Maybe there's a default route through this gateway already
     #
     [ -n "$gateway" ] || gateway=$(find_gateway $($IP -4 route list dev $interface | grep ^default))
+
+    [ -z "$gateway" -a -n "$2" ] && gateway=$(find_gateway $($IP -4 route list dev $interface table $2 | grep ^default))
     #
     # Last hope -- is there a load-balancing route through the interface?
     #

Shorewall/Perl/prog.footer

@@ -78,11 +78,13 @@ reload_command() {
     detect_configuration
     define_firewall
     status=$?
-    if [ -n "$SUBSYSLOCK" ]; then
- 	[ $status -eq 0 ] && touch $SUBSYSLOCK || rm -f $SUBSYSLOCK
-    fi
 
-    [ $status -eq 0 ] && progress_message3 "done."
+    if [ $status -eq 0 ]; then
+	[ -n "$SUBSYSLOCK" ] && touch $SUBSYSLOCK
+	progress_message3 "done."
+    else
+	[ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
+    fi
 }
 
 ################################################################################
@@ -127,8 +129,10 @@ g_counters=
 g_compiled=
 g_file=
 g_docker=
+g_dockeringress=
 g_dockernetwork=
 g_forcereload=
+g_fallback=
 
 [ -n "$SERVICEDIR" ] && SUBSYSLOCK=
 
@@ -264,8 +268,10 @@ case "$COMMAND" in
 	    error_message "$g_product is not running"
 	    status=2
 	elif [ $# -eq 1 ]; then
-	    $g_tool -Z
-	    $g_tool -t mangle -Z
+	    for table in raw mangle nat filter; do
+		qt $g_tool -t $table -Z
+	    done
+
 	    date > ${VARDIR}/restarted
 	    status=0
 	    progress_message3 "$g_product Counters Reset"
@@ -418,9 +424,12 @@ case "$COMMAND" in
 	[ $# -ne 1 ] && usage 2
 	mutex_on
 	if product_is_started; then
+	    COMMAND=disable
 	    detect_configuration $1
-	    COMMAND=enable  disable_provider $1 Yes
-	    COMMAND=disable enable_provider  $1 Yes
+	    disable_provider $1 Yes
+	    COMMAND=enable
+	    detect_configuration $1
+	    enable_provider  $1 Yes
 	fi
 	mutex_off
 	status=0

Shorewall/Samples/Universal/shorewall.conf

@@ -77,7 +77,7 @@ UNTRACKED_LOG_LEVEL=
 
 ARPTABLES=
 
-CONFIG_PATH="${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
+CONFIG_PATH=":${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
 
 GEOIPDIR=/usr/share/xt_geoip/LE
 
@@ -205,8 +205,6 @@ MINIUPNPD=No
 
 MARK_IN_FORWARD_CHAIN=No
 
-MODULE_SUFFIX="ko ko.xz"
-
 MULTICAST=No
 
 MUTEX_TIMEOUT=60
@@ -249,6 +247,8 @@ TRACK_RULES=No
 
 USE_DEFAULT_RT=Yes
 
+USE_NFLOG_SIZE=No
+
 USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No

Shorewall/Samples/one-interface/interfaces

@@ -1,6 +1,6 @@
 #
 # Shorewall - Sample Interfaces File for one-interface configuration.
-# Copyright (C) 2006-2015 by the Shorewall Team
+# Copyright (C) 2006-2017 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -14,4 +14,4 @@
 ?FORMAT 2
 ###############################################################################
 #ZONE	INTERFACE	OPTIONS
-net     eth0            dhcp,tcpflags,logmartians,nosmurfs,sourceroute=0
+net     NET_IF          dhcp,tcpflags,logmartians,nosmurfs,sourceroute=0,physical=eth0

Shorewall/Samples/one-interface/shorewall.conf

@@ -88,7 +88,7 @@ UNTRACKED_LOG_LEVEL=
 
 ARPTABLES=
 
-CONFIG_PATH="${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
+CONFIG_PATH=":${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
 
 GEOIPDIR=/usr/share/xt_geoip/LE
 
@@ -216,8 +216,6 @@ MINIUPNPD=No
 
 MARK_IN_FORWARD_CHAIN=No
 
-MODULE_SUFFIX="ko ko.xz"
-
 MULTICAST=No
 
 MUTEX_TIMEOUT=60
@@ -260,6 +258,8 @@ TRACK_RULES=No
 
 USE_DEFAULT_RT=Yes
 
+USE_NFLOG_SIZE=No
+
 USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No

Shorewall/Samples/three-interfaces/interfaces

@@ -1,6 +1,6 @@
 #
 # Shorewall - Sample Interfaces File for three-interface configuration.
-# Copyright (C) 2006-2015 by the Shorewall Team
+# Copyright (C) 2006-2017 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -14,6 +14,6 @@
 ?FORMAT 2
 ###############################################################################
 #ZONE	INTERFACE	OPTIONS
-net     eth0            tcpflags,dhcp,nosmurfs,routefilter,logmartians,sourceroute=0
-loc     eth1            tcpflags,nosmurfs,routefilter,logmartians
-dmz     eth2            tcpflags,nosmurfs,routefilter,logmartians
+net     NET_IF          tcpflags,dhcp,nosmurfs,routefilter,logmartians,sourceroute=0,physical=eth0
+loc     LOC_IF          tcpflags,nosmurfs,routefilter,logmartians,physical=eth1
+dmz     DMZ_IF          tcpflags,nosmurfs,routefilter,logmartians,physical=eth2

Shorewall/Samples/three-interfaces/shorewall.conf

@@ -85,7 +85,7 @@ UNTRACKED_LOG_LEVEL=
 
 ARPTABLES=
 
-CONFIG_PATH="${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
+CONFIG_PATH=":${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
 
 GEOIPDIR=/usr/share/xt_geoip/LE
 
@@ -213,8 +213,6 @@ MINIUPNPD=No
 
 MARK_IN_FORWARD_CHAIN=No
 
-MODULE_SUFFIX="ko ko.xz"
-
 MULTICAST=No
 
 MUTEX_TIMEOUT=60
@@ -257,6 +255,8 @@ TRACK_RULES=No
 
 USE_DEFAULT_RT=Yes
 
+USE_NFLOG_SIZE=No
+
 USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No

Shorewall/Samples/three-interfaces/snat

@@ -1,6 +1,6 @@
 #
 # Shorewall - Sample SNAT/Masqueradee File for three-interface configuration.
-# Copyright (C) 2006-2016 by the Shorewall Team
+# Copyright (C) 2006-2017 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -20,4 +20,4 @@
 MASQUERADE		10.0.0.0/8,\
 			169.254.0.0/16,\
 			172.16.0.0/12,\
-			192.168.0.0/16		eth0
+			192.168.0.0/16		NET_IF

Shorewall/Samples/three-interfaces/stoppedrules

@@ -1,6 +1,6 @@
 #
 # Shorewall - Sample Stoppedrules File for three-interface configuration.
-# Copyright (C) 2012-2015 by the Shorewall Team
+# Copyright (C) 2012-2017 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -13,8 +13,8 @@
 ###############################################################################
 #ACTION		SOURCE		DEST		PROTO	DEST		SOURCE
 #							PORT(S)		PORT(S)
-ACCEPT		eth1		-
-ACCEPT		-		eth1
-ACCEPT		eth2		-
-ACCEPT		-		eth2
+ACCEPT		LOC_IF		-
+ACCEPT		-		LOC_IF
+ACCEPT		DMZ_IF		-
+ACCEPT		-		DMZ_IF
 

Shorewall/Samples/two-interfaces/interfaces

@@ -1,6 +1,6 @@
 #
 # Shorewall - Sample Interfaces File for two-interface configuration.
-# Copyright (C) 2006-2015 by the Shorewall Team
+# Copyright (C) 2006-2017 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -14,5 +14,5 @@
 ?FORMAT 2
 ###############################################################################
 #ZONE	INTERFACE	OPTIONS
-net     eth0            dhcp,tcpflags,nosmurfs,routefilter,logmartians,sourceroute=0
-loc     eth1            tcpflags,nosmurfs,routefilter,logmartians
+net     NET_IF          dhcp,tcpflags,nosmurfs,routefilter,logmartians,sourceroute=0,physical=eth0
+loc     LOC_IF          tcpflags,nosmurfs,routefilter,logmartians,physical=eth1

Shorewall/Samples/two-interfaces/shorewall.conf

@@ -88,7 +88,7 @@ UNTRACKED_LOG_LEVEL=
 
 ARPTABLES=
 
-CONFIG_PATH="${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
+CONFIG_PATH=":${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
 
 GEOIPDIR=/usr/share/xt_geoip/LE
 
@@ -216,8 +216,6 @@ MINIUPNPD=No
 
 MARK_IN_FORWARD_CHAIN=No
 
-MODULE_SUFFIX="ko ko.xz"
-
 MULTICAST=No
 
 MUTEX_TIMEOUT=60
@@ -260,6 +258,8 @@ TRACK_RULES=No
 
 USE_DEFAULT_RT=Yes
 
+USE_NFLOG_SIZE=No
+
 USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No

Shorewall/Samples/two-interfaces/snat

@@ -1,6 +1,6 @@
 #
 # Shorewall - Sample SNAT/Masqueradee File for two-interface configuration.
-# Copyright (C) 2006-2016 by the Shorewall Team
+# Copyright (C) 2006-2017 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -20,4 +20,4 @@
 MASQUERADE		10.0.0.0/8,\
 			169.254.0.0/16,\
 			172.16.0.0/12,\
-			192.168.0.0/16		eth0
+			192.168.0.0/16		NET_IF

Shorewall/Samples/two-interfaces/stoppedrules

@@ -1,6 +1,6 @@
 #
 # Shorewall - Sample Stoppedrules File for two-interface configuration.
-# Copyright (C) 2012-2015 by the Shorewall Team
+# Copyright (C) 2012-2017 by the Shorewall Team
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -13,5 +13,5 @@
 ###############################################################################
 #ACTION		SOURCE		DEST		PROTO	DEST		SOURCE
 #							PORT(S)		PORT(S)
-ACCEPT		eth1		-
-ACCEPT		-		eth1
+ACCEPT		LOC_IF		-
+ACCEPT		-		LOC_IF

Shorewall/actions.std

@@ -21,33 +21,46 @@ allowMcast   inline		# Silently Allow Multicast
 AutoBL	     noinline		# Auto-blacklist IPs that exceed thesholds
 AutoBLL	     noinline		# Helper for AutoBL
 BLACKLIST    logjump,section	# Add sender to the dynamic blacklist
+?if __ADDRTYPE
+Broadcast    inline,audit	# Handles Broadcast/Anycast
+?else
 Broadcast    noinline,audit	# Handles Broadcast/Anycast
-DNSAmp				# Matches one-question recursive DNS queries
+?endif
+DNSAmp	     proto=17		# Matches one-question recursive DNS queries
 Drop				# Default Action for DROP policy (deprecated)
 dropBcast    inline		# Silently Drop Broadcast
+dropBcasts   inline		# Silently Drop Broadcast
 dropInvalid  inline		# Drops packets in the INVALID conntrack state
 dropMcast    inline		# Silently Drop Multicast
-dropNotSyn   noinline		# Silently Drop Non-syn TCP packets
-DropDNSrep   inline		# Drops DNS replies
+dropNotSyn   noinline,proto=6	# Silently Drop Non-syn TCP packets
+DropDNSrep   inline,proto=17	# Drops DNS replies
 DropSmurfs   noinline		# Drop smurf packets
 Established  inline,\		# Handles packets in the ESTABLISHED state
 	     state=ESTABLISHED	#
+FIN	     inline,audit,\	# Handles ACK,FIN packets
+	     proto=6
 forwardUPnP  noinline		# Allow traffic that upnpd has redirected from 'upnp' interfaces.
 GlusterFS    inline		# Handles GlusterFS
 IfEvent	     noinline		# Perform an action based on an event
 Invalid	     inline,audit,\	# Handles packets in the INVALID conntrack state
 	     state=INVALID	#
 Limit	     noinline		# Limit the rate of connections from each individual IP address
+?if __ADDRTYPE
+Multicast    inline,audit	# Handles Multicast
+?else
 Multicast    noinline,audit	# Handles Multicast
+?endif
 New	     inline,state=NEW	# Handles packets in the NEW conntrack state
-NotSyn	     inline,audit	# Handles TCP packets which do not have SYN=1 and ACK=0
-rejNotSyn    noinline		# Silently Reject Non-syn TCP packets
+NotSyn	     inline,audit,\	# Handles TCP packets which do not have SYN=1 and ACK=0
+	     proto=6
+rejNotSyn    noinline,proto=6	# Silently Reject Non-syn TCP packets
 Reject				# Default Action for REJECT policy (deprecated)
 Related	     inline,\		# Handles packets in the RELATED conntrack state
 	     state=RELATED	#
 ResetEvent   inline		# Reset an Event
-RST	     inline,audit	# Handle packets with RST set
+RST	     inline,audit,\	# Handle packets with RST set
+	     proto=6
 SetEvent     inline		# Initialize an event
-TCPFlags			# Handle bad flag combinations.
+TCPFlags     proto=6		# Handle bad flag combinations.
 Untracked    inline,\		# Handles packets in the UNTRACKED conntrack state
 	     state=UNTRACKED	#

Shorewall/configfiles/disabled

@@ -0,0 +1,12 @@
+#
+# Shorewall -- /etc/shorewall/disabled
+#
+# Add commands below that you want executed when an optional
+# interface is successfully disabled using the 'disable' command
+#
+# When the commands are invoked:
+#
+#  $1 contains the physical name of the interface
+#  $2 contains the logical name of the interface
+#  $3 contains the name of the provider associated with the interface,
+      if any

Shorewall/configfiles/enabled

@@ -0,0 +1,12 @@
+#
+# Shorewall -- /etc/shorewall/enabled
+#
+# Add commands below that you want executed when an optional
+# interface is successfully enabled using the 'enable' command
+#
+# When the commands are invoked:
+#
+#  $1 contains the physical name of the interface
+#  $2 contains the logical name of the interface
+#  $3 contains the name of the provider associated with the interface,
+      if any

Shorewall/configfiles/shorewall.conf

@@ -77,7 +77,7 @@ UNTRACKED_LOG_LEVEL=
 
 ARPTABLES=
 
-CONFIG_PATH="${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
+CONFIG_PATH=":${CONFDIR}/shorewall:${SHAREDIR}/shorewall"
 
 GEOIPDIR=/usr/share/xt_geoip/LE
 
@@ -205,8 +205,6 @@ MARK_IN_FORWARD_CHAIN=No
 
 MINIUPNPD=No
 
-MODULE_SUFFIX=ko
-
 MULTICAST=No
 
 MUTEX_TIMEOUT=60
@@ -249,6 +247,8 @@ TRACK_RULES=No
 
 USE_DEFAULT_RT=Yes
 
+USE_NFLOG_SIZE=No
+
 USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No

Shorewall/configpath

@@ -3,4 +3,4 @@
 #
 # /usr/share/shorewall/configpath
 #
-CONFIG_PATH=${CONFDIR}/shorewall:${SHAREDIR}/shorewall
+CONFIG_PATH=":${CONFDIR}/shorewall:${SHAREDIR}/shorewall"

Shorewall/install.sh

@@ -213,6 +213,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=suse
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ] ; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -264,6 +266,9 @@ case "$HOST" in
     archlinux)
 	echo "Installing ArchLinux-specific configuration..."
 	;;
+    openwrt)
+	echo "Installing OpenWRT-specific configuration..."
+	;;
     linux)
 	;;
     *)
@@ -492,8 +497,11 @@ fi
 #
 # Install the config file
 #
-run_install $OWNERSHIP -m 0644 $PRODUCT.conf           ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles/
-run_install $OWNERSHIP -m 0644 $PRODUCT.conf.annotated ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles/
+run_install $OWNERSHIP -m 0644 $PRODUCT.conf            ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles/
+
+if [ $PRODUCT = shorewall ]; then
+    run_install $OWNERSHIP -m 0644 shorewall.conf.annotated ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles/
+fi
 
 if [ ! -f ${DESTDIR}${CONFDIR}/$PRODUCT/$PRODUCT.conf ]; then
     run_install $OWNERSHIP -m 0600 ${PRODUCT}.conf${suffix} ${DESTDIR}${CONFDIR}/$PRODUCT/$PRODUCT.conf
@@ -613,8 +621,14 @@ run_install $OWNERSHIP -m 0644 params.annotated ${DESTDIR}${SHAREDIR}/$PRODUCT/c
 if [ -f ${DESTDIR}${CONFDIR}/$PRODUCT/params ]; then
     chmod 0644 ${DESTDIR}${CONFDIR}/$PRODUCT/params
 else
-    run_install $OWNERSHIP -m 0600 params${suffix} ${DESTDIR}${CONFDIR}/$PRODUCT/params
-    echo "Parameter file installed as ${DESTDIR}${CONFDIR}/$PRODUCT/params"
+    case "$SPARSE" in
+	[Vv]ery)
+	;;
+	*)
+	    run_install $OWNERSHIP -m 0600 params${suffix} ${DESTDIR}${CONFDIR}/$PRODUCT/params
+	    echo "Parameter file installed as ${DESTDIR}${CONFDIR}/$PRODUCT/params"
+	    ;;
+    esac
 fi
 
 if [ $PRODUCT = shorewall ]; then
@@ -690,10 +704,16 @@ fi
 run_install $OWNERSHIP -m 0644 conntrack           ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles
 run_install $OWNERSHIP -m 0644 conntrack.annotated ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles
 
-if [ ! -f ${DESTDIR}${CONFDIR}/$PRODUCT/conntrack ]; then
-    run_install $OWNERSHIP -m 0600 conntrack${suffix} ${DESTDIR}${CONFDIR}/$PRODUCT/conntrack
-    echo "Conntrack file installed as ${DESTDIR}${CONFDIR}/$PRODUCT/conntrack"
-fi
+case "$SPARSE" in
+    [Vv]ery)
+    ;;
+    *)
+	if [ ! -f ${DESTDIR}${CONFDIR}/$PRODUCT/conntrack ]; then
+	    run_install $OWNERSHIP -m 0600 conntrack${suffix} ${DESTDIR}${CONFDIR}/$PRODUCT/conntrack
+	    echo "Conntrack file installed as ${DESTDIR}${CONFDIR}/$PRODUCT/conntrack"
+	fi
+	;;
+esac
 
 #
 # Install the Mangle file
@@ -1147,13 +1167,39 @@ if [ -n "$MANDIR" ]; then
 
 cd manpages
 
-[ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man5 0755
+if [ $PRODUCT = shorewall ]; then
+    [ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man5 0755
 
-for f in *.5; do
-    gzip -9c $f > $f.gz
-    run_install $INSTALLD  -m 0644 $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz
-    echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
-done
+    for f in *.5; do
+	gzip -9c $f > $f.gz
+	run_install $INSTALLD  -m 0644 $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
+    done
+fi
+
+if [ $PRODUCT = shorewall6 ]; then
+    make_parent_directory ${DESTDIR}${MANDIR}/man5 0755
+
+    rm -f ${DESTDIR}${MANDIR}/man5/shorewall6*
+
+    for f in \
+	shorewall-accounting.5  shorewall-ipsets.5   shorewall-providers.5     shorewall-tcclasses.5     \
+	shorewall-actions.5     shorewall-maclist.5                            shorewall-tcdevices.5     \
+	                        shorewall-mangle.5   shorewall-proxyndp.5      shorewall-tcfilters.5     \
+	shorewall-blacklist.5   shorewall-masq.5     shorewall-routes.5        shorewall-tcinterfaces.5  \
+	shorewall-blrules.5     shorewall-modules.5  shorewall-routestopped.5  shorewall-tcpri.5         \
+	shorewall-conntrack.5   shorewall-nat.5      shorewall-rtrules.5       shorewall-tcrules.5       \
+                                shorewall-nesting.5  shorewall-rules.5         shorewall-tos.5           \
+	shorewall-exclusion.5   shorewall-netmap.5   shorewall-secmarks.5      shorewall-tunnels.5       \
+	shorewall-hosts.5       shorewall-params.5   shorewall-snat.5          shorewall-vardir.5        \
+	shorewall-interfaces.5  shorewall-policy.5   shorewall-stoppedrules.5  shorewall-zones.5
+    do
+	f6=shorewall6-${f#*-}
+	echo ".so man5/$f" > ${DESTDIR}${MANDIR}/man5/$f6
+    done
+
+    echo ".so man5/shorewall.conf.5" > ${DESTDIR}${MANDIR}/man5/shorewall6.conf.5
+fi
 
 [ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
 

Shorewall/lib.cli-std

@@ -211,30 +211,35 @@ get_config() {
 	LOG_VERBOSITY=-1
     fi
 
-    if [ -n "$SHOREWALL_SHELL" -a -z "$g_export" ]; then
-	if [ ! -x "$SHOREWALL_SHELL" ]; then
-	    echo "   WARNING: The program specified in SHOREWALL_SHELL does not exist or is not executable; falling back to /bin/sh" >&2
-	    SHOREWALL_SHELL=/bin/sh
+    if [ -z "${g_export}${g_test}" ]; then
+	if [ -n "$SHOREWALL_SHELL" ]; then
+	    if [ ! -x "$SHOREWALL_SHELL" ]; then
+		echo "   WARNING: The program specified in SHOREWALL_SHELL does not exist or is not executable; falling back to /bin/sh" >&2
+		SHOREWALL_SHELL=/bin/sh
+	    fi
 	fi
-    fi
 
-    if [ -n "$IP" ]; then
-	case "$IP" in
-	    */*)
-		if [ ! -x "$IP" ] ; then
-		    fatal_error "The program specified in IP ($IP) does not exist or is not executable"
-		fi
-		;;
-	    *)
-		prog="$(mywhich $IP 2> /dev/null)"
-		if [ -z "$prog" ] ; then
-		    fatal_error "Can't find $IP executable"
-		fi
-		IP=$prog
-		;;
-	esac
+	if [ -n "$IP" ]; then
+	    case "$IP" in
+		*/*)
+		    if [ ! -x "$IP" ] ; then
+			fatal_error "The program specified in IP ($IP) does not exist or is not executable"
+		    fi
+		    ;;
+		*)
+		    prog="$(mywhich $IP 2> /dev/null)"
+		    if [ -z "$prog" ] ; then
+			fatal_error "Can't find $IP executable"
+		    fi
+		    IP=$prog
+		    ;;
+	    esac
+	else
+	    IP='ip'
+	fi
     else
-	IP='ip'
+	[ -n "$SHOREWALL_SHELL" ] || SHOREWALL_SHELL=/bin/sh
+	[ -n "$IP" ]              || IP='ip'
     fi
 
     case $VERBOSITY in
@@ -770,6 +775,10 @@ check_command() {
 			    g_profile=Yes
 			    option=${option#p}
 			    ;;
+			t*)
+			    g_test=Yes
+			    option=${option#t}
+			    ;;
 			d*)
 			    g_debug=Yes;
 			    option=${option#d}
@@ -854,6 +863,10 @@ update_command() {
 			    g_profile=Yes
 			    option=${option#p}
 			    ;;
+			t*)
+			    g_test=Yes
+			    option=${option#t}
+			    ;;
 			d*)
 			    g_debug=Yes;
 			    option=${option#d}
@@ -1527,6 +1540,8 @@ remote_reload_command() # $* = original arguments less the command.
 	litedir="${VARDIR}-lite"
     fi
 
+    g_export=Yes
+
     if [ -f $g_shorewalldir/${PRODUCT}.conf ]; then
 	if [ -f $g_shorewalldir/params ]; then
 	    . $g_shorewalldir/params
@@ -1556,18 +1571,16 @@ remote_reload_command() # $* = original arguments less the command.
 
 	progress_message "Getting Capabilities on system $system..."
 	if [ $g_family -eq 4 ]; then
-	    if ! rsh_command "MODULESDIR=$MODULESDIR MODULE_SUFFIX=\"$MODULE_SUFFIX\" IPTABLES=$IPTABLES DONT_LOAD=\"$DONT_LOAD\" $libexec/shorewall-lite/shorecap" > $g_shorewalldir/capabilities; then
+	    if ! rsh_command "MODULESDIR=$MODULESDIR IPTABLES=$IPTABLES DONT_LOAD=\"$DONT_LOAD\" $libexec/shorewall-lite/shorecap" > $g_shorewalldir/capabilities; then
 	        fatal_error "Capturing capabilities on system $system failed"
 	    fi
-	elif ! rsh_command "MODULESDIR=$MODULESDIR MODULE_SUFFIX=\"$MODULE_SUFFIX\" IP6TABLES=$IP6TABLES DONT_LOAD=\"$DONT_LOAD\" $libexec/shorewall6-lite/shorecap" > $g_shorewalldir/capabilities; then
+	elif ! rsh_command "MODULESDIR=$MODULESDIR IP6TABLES=$IP6TABLES DONT_LOAD=\"$DONT_LOAD\" $libexec/shorewall6-lite/shorecap" > $g_shorewalldir/capabilities; then
 	    fatal_error "Capturing capabilities on system $system failed"
 	fi
     fi
 
     file=$(resolve_file $g_shorewalldir/firewall)
 
-    g_export=Yes
-
     program=$sbindir/${PRODUCT}-lite
     #
     # Handle nonstandard remote VARDIR

Shorewall/manpages/shorewall-accounting.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/accounting</command>
+      <command>/etc/shorewall[6]/accounting</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -783,29 +783,19 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/accounting</para>
+
+    <para>/etc/shorewall6/accounting</para>
   </refsect1>
 
   <refsect1>
     <title>See ALSO</title>
 
     <para><ulink
-    url="/Accounting.html">http://www.shorewall.net/Accounting.html
-    </ulink></para>
-
-    <para><ulink
-    url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink></para>
+    url="shorewall-logging.htm">shorewall-logging(5)</ulink></para>
 
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-actions(5), shorewall-blacklist(5),
-    shorewall-hosts(5), shorewall_interfaces(5), shorewall-ipsets(5),
-    shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5),
-    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-actions.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/actions</command>
+      <command>/etc/shorewall[6]/actions</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -148,8 +148,8 @@
               <listitem>
                 <para>Added in Shorewall 5.0.7. Specifies that this action is
                 to be used in <ulink
-                url="/manpages/shorewall-mangle.html">shorewall-mangle(5)</ulink> rather
-                than <ulink
+                url="/manpages/shorewall-mangle.html">shorewall-mangle(5)</ulink>
+                rather than <ulink
                 url="/manpages/shorewall-rules.html">shorewall-rules(5)</ulink>.</para>
               </listitem>
             </varlistentry>
@@ -160,11 +160,11 @@
               <listitem>
                 <para>Added in Shorewall 5.0.13. Specifies that this action is
                 to be used in <ulink
-                url="/manpages/shorewall-snat.html">shorewall-snat(5)</ulink> rather
-                than <ulink
-                url="/manpages/shorewall-rules.html">shorewall-rules(5)</ulink>. The
-                <option>mangle</option> and <option>nat</option> options are
-                mutually exclusive.</para>
+                url="/manpages/shorewall-snat.html">shorewall-snat(5)</ulink>
+                rather than <ulink
+                url="/manpages/shorewall-rules.html">shorewall-rules(5)</ulink>.
+                The <option>mangle</option> and <option>nat</option> options
+                are mutually exclusive.</para>
               </listitem>
             </varlistentry>
 
@@ -191,6 +191,27 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><option>proto</option>=<replaceable>protocol</replaceable></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.1.10. Specifies that the action is
+                only usable with the specified
+                <replaceable>protocol</replaceable> (name or number). When the
+                action is invoked with no protocol specified in the PROTO
+                column, or if the action is used as a Policy Action, the named
+                <replaceable>protocol</replaceable> will be assumed. If a
+                protocol is specified in the PROTO column of an invocation,
+                then it must match the named
+                <replaceable>protocol</replaceable>.</para>
+
+                <para>The <option>proto</option> option has no effect if the
+                <option>inline</option> or <option>builtin</option> option is
+                specified. A warning is issued if <option>proto</option> is
+                specified along with <option>builtin</option>.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><option>section</option></term>
 
@@ -206,7 +227,7 @@
                 <para>Given that neither the <filename>snat</filename> nor the
                 <filename>mangle</filename> file is sectioned, this parameter
                 has no effect when <option>mangle</option> or
-                <option>nat</option> is specified. </para>
+                <option>nat</option> is specified.</para>
               </listitem>
             </varlistentry>
 
@@ -239,6 +260,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/actions</para>
+
+    <para>/etc/shorewall6/actions</para>
   </refsect1>
 
   <refsect1>
@@ -247,14 +270,6 @@
     <para><ulink
     url="/Actions.html">http://www.shorewall.net/Actions.html</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-blacklist(5),
-    shorewall-hosts(5), shorewall_interfaces(5), shorewall-ipsets(5),
-    shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5),
-    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-arprules.xml

@@ -25,6 +25,8 @@
   <refsect1>
     <title>Description</title>
 
+    <para>IPv4 only.</para>
+
     <para>This file was added in Shorewall 4.5.12 and is used to describe
     low-level rules managed by arptables (8). These rules only affect Address
     Resolution Protocol (ARP), Reverse Address Resolution Protocol (RARP) and
@@ -377,4 +379,10 @@ SNAT:10.1.10.11        -                       eth1:10.1.10.0/24   1</programlis
 
     <para>/etc/shorewall/arprules</para>
   </refsect1>
+
+  <refsect1>
+    <title>See ALSO</title>
+
+    <para>shorewall(8)</para>
+  </refsect1>
 </refentry>

Shorewall/manpages/shorewall-blrules.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/blrules</command>
+      <command>/etc/shorewall[6]/blrules</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -27,12 +27,9 @@
 
     <para>This file is used to perform blacklisting and whitelisting.</para>
 
-    <para>Rules in this file are applied depending on the setting of
-    BLACKLISTNEWONLY in <ulink
-    url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). If
-    BLACKLISTNEWONLY=No, then they are applied regardless of the connection
-    tracking state of the packet. If BLACKLISTNEWONLY=Yes, they are applied to
-    connections in the NEW and INVALID states.</para>
+    <para>Rules in this file are applied depending on the setting of BLACKLIST
+    in <ulink
+    url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
 
     <para>The format of rules in this file is the same as the format of rules
     in <ulink url="/manpages/shorewall-rules.html">shorewall-rules
@@ -118,10 +115,10 @@
             </varlistentry>
 
             <varlistentry>
-              <term>A_DROP and A_DROP!</term>
+              <term>A_DROP</term>
 
               <listitem>
-                <para>Audited versions of DROP. Requires AUDIT_TARGET support
+                <para>Audited version of DROP. Requires AUDIT_TARGET support
                 in the kernel and ip6tables.</para>
               </listitem>
             </varlistentry>
@@ -170,7 +167,7 @@
               <listitem>
                 <para>queues matching packets to a back end logging daemon via
                 a netlink socket then continues to the next rule. See <ulink
-                url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
+                url="shorewall-logging.html">shorewall-logging(5)</ulink>.</para>
               </listitem>
             </varlistentry>
 
@@ -261,7 +258,7 @@
           <para>You may also specify <emphasis role="bold">NFLOG</emphasis>
           (must be in upper case) as a log level.This will log to the NFLOG
           target for routing to a separate log through use of ulogd (<ulink
-          url="http://www.netfilter.org/projects/ulogd/index.html">http://www.netfilter.org/projects/ulogd/index.html</ulink>).</para>
+          url="shorewall-logging.html">shorewall-logging.htm</ulink>).</para>
 
           <para>Actions specifying logging may be followed by a log tag (a
           string of alphanumeric characters) which is appended to the string
@@ -276,11 +273,11 @@
   </refsect1>
 
   <refsect1>
-    <title>Example</title>
+    <title>Examples</title>
 
     <variablelist>
       <varlistentry>
-        <term>Example 1:</term>
+        <term>IPv4 Example 1:</term>
 
         <listitem>
           <para>Drop Teredo packets from the net.</para>
@@ -290,7 +287,28 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 2:</term>
+        <term>IPv4 Example 2:</term>
+
+        <listitem>
+          <para>Don't subject packets from 2001:DB8::/64 to the remaining
+          rules in the file.</para>
+
+          <programlisting>WHITELIST     net:[2001:DB8::/64]        all</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 1:</term>
+
+        <listitem>
+          <para>Drop Teredo packets from the net.</para>
+
+          <programlisting>DROP          net:[2001::/32]            all</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 2:</term>
 
         <listitem>
           <para>Don't subject packets from 2001:DB8::/64 to the remaining
@@ -306,6 +324,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/blrules</para>
+
+    <para>/etc/shorewall6/blrules</para>
   </refsect1>
 
   <refsect1>
@@ -317,12 +337,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-hosts(5), shorewall-interfaces(5), shorewall-maclist(5),
-    shorewall6-netmap(5),shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-rtrules(5), shorewall-routestopped(5),
-    shorewall-rules(5), shorewall.conf(5), shorewall-secmarks(5),
-    shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-mangle(5),
-    shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-conntrack.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/conntrack</command>
+      <command>/etc/shorewall[6]/conntrack</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -35,7 +35,7 @@
     <emphasis role="bold">conntrack</emphasis>.</para>
 
     <para>The file supports three different column layouts: FORMAT 1, FORMAT
-    2, and FORMAT 3, FORMAT 1 being the default. The three differ as
+    2, and FORMAT 3 with FORMAT 1 being the default. The three differ as
     follows:</para>
 
     <itemizedlist>
@@ -311,9 +311,9 @@
             <listitem>
               <para><option>ULOG</option></para>
 
-              <para>Added in Shoreawll 4.6.0. Queues the packet to a backend
-              logging daemon using the ULOG netfilter target with the
-              specified <replaceable>ulog-parameters</replaceable>.</para>
+              <para>IPv4 only. Added in Shoreawll 4.6.0. Queues the packet to
+              a backend logging daemon using the ULOG netfilter target with
+              the specified <replaceable>ulog-parameters</replaceable>.</para>
             </listitem>
           </itemizedlist>
 
@@ -447,7 +447,7 @@
 
               <listitem>
                 <para>This form combines the preceding two and requires that
-                both the incoming interace and source address match.</para>
+                both the incoming interface and source address match.</para>
               </listitem>
             </varlistentry>
 
@@ -543,7 +543,7 @@
 
               <listitem>
                 <para>This form combines the preceding two and requires that
-                both the outgoing interace and destination address
+                both the outgoing interface and destination address
                 match.</para>
               </listitem>
             </varlistentry>
@@ -689,31 +689,57 @@
   <refsect1>
     <title>EXAMPLE</title>
 
-    <para>Example 1:</para>
+    <para>IPv4 Example 1:</para>
 
     <programlisting>#ACTION                       SOURCE            DEST               PROTO            DPORT             SPORT               USER
 CT:helper:ftp(expevents=new)  fw                -                  tcp              21              </programlisting>
 
-    <para>Example 2 (Shorewall 4.5.10 or later):</para>
+    <para>IPv4 Example 2 (Shorewall 4.5.10 or later):</para>
 
     <para>Drop traffic to/from all zones to IP address 1.2.3.4</para>
 
-    <programlisting>FORMAT 2
+    <programlisting>?FORMAT 2
 #ACTION                       SOURCE             DEST               PROTO           DPORT             SPORT               USER
 DROP                          all-:1.2.3.4       -
 DROP                          all                1.2.3.4</programlisting>
 
-    <para>or<programlisting>FORMAT 3
+    <para>or<programlisting>?FORMAT 3
 #ACTION                       SOURCE             DEST               PROTO           DPORT             SPORT               USER
 DROP:P                        1.2.3.4            -
 DROP:PO                       -                  1.2.3.4
 </programlisting></para>
+
+    <para>IPv6 Example 1:</para>
+
+    <para>Use the FTP helper for TCP port 21 connections from the firewall
+    itself.</para>
+
+    <programlisting>FORMAT 2
+#ACTION                       SOURCE            DEST               PROTO            DPORT             SPORT               USER
+CT:helper:ftp(expevents=new)  fw                -                  tcp              21              </programlisting>
+
+    <para>IPv6 Example 2 (Shorewall 4.5.10 or later):</para>
+
+    <para>Drop traffic to/from all zones to IP address 2001:1.2.3::4</para>
+
+    <programlisting>FORMAT 2
+#ACTION                       SOURCE             DEST               PROTO            DPORT             SPORT               USER
+DROP                          all-:2001:1.2.3::4 -
+DROP                          all                2001:1.2.3::4
+</programlisting>
+
+    <para>or<programlisting>FORMAT 3
+#ACTION                       SOURCE             DEST               PROTO            DPORT             SPORT               USER
+DROP:P                        2001:1.2.3::4      -
+DROP:PO                       -                  2001:1.2.3::4</programlisting></para>
   </refsect1>
 
   <refsect1>
     <title>FILES</title>
 
     <para>/etc/shorewall/conntrack</para>
+
+    <para>/etc/shorewall6/conntrack</para>
   </refsect1>
 
   <refsect1>
@@ -722,14 +748,6 @@ DROP:PO                       -                  1.2.3.4
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-masq(5), shorewall-nat(5),
-    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-ecn.xml

@@ -25,8 +25,12 @@
   <refsect1>
     <title>Description</title>
 
+    <para>IPv4 only.</para>
+
     <para>Use this file to list the destinations for which you want to disable
-    ECN (Explicit Congestion Notification).</para>
+    ECN (Explicit Congestion Notification). Use of this file is deprecated in
+    favor of ECN rules in <ulink
+    url="/manpages/shorewall-mangle.html">shorewall-mangle</ulink>(8).</para>
 
     <para>The columns in the file are as follows.</para>
 
@@ -65,14 +69,6 @@
   <refsect1>
     <title>See ALSO</title>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-exclusion.xml

@@ -49,9 +49,10 @@
 
     <para>Beginning in Shorewall 4.4.13, the second form of exclusion is
     allowed after <emphasis role="bold">all</emphasis> and <emphasis
-    role="bold">any</emphasis> in the SOURCE and DEST columns of
-    /etc/shorewall/rules. It allows you to omit arbitrary zones from the list
-    generated by those key words.</para>
+    role="bold">any</emphasis> in the SOURCE and DEST columns of <ulink
+    url="/manpages/shorewall-rules.html">shorewall-rules</ulink>(5). It allows
+    you to omit arbitrary zones from the list generated by those key
+    words.</para>
 
     <warning>
       <para>If you omit a sub-zone and there is an explicit or explicit
@@ -117,7 +118,7 @@ ACCEPT          all!z2        net         tcp           22</programlisting>
 
     <variablelist>
       <varlistentry>
-        <term>Example 1 - All IPv4 addresses except 192.168.3.4</term>
+        <term>IPv4 Example 1 - All IPv4 addresses except 192.168.3.4</term>
 
         <listitem>
           <para>!192.168.3.4</para>
@@ -125,8 +126,8 @@ ACCEPT          all!z2        net         tcp           22</programlisting>
       </varlistentry>
 
       <varlistentry>
-        <term>Example 2 - All IPv4 addresses except the network 192.168.1.0/24
-        and the host 10.2.3.4</term>
+        <term>IPv4 Example 2 - All IPv4 addresses except the network
+        192.168.1.0/24 and the host 10.2.3.4</term>
 
         <listitem>
           <para>!192.168.1.0/24,10.1.3.4</para>
@@ -134,7 +135,7 @@ ACCEPT          all!z2        net         tcp           22</programlisting>
       </varlistentry>
 
       <varlistentry>
-        <term>Example 3 - All IPv4 addresses except the range
+        <term>IPv4 Example 3 - All IPv4 addresses except the range
         192.168.1.3-192.168.1.12 and the network 10.0.0.0/8</term>
 
         <listitem>
@@ -143,8 +144,8 @@ ACCEPT          all!z2        net         tcp           22</programlisting>
       </varlistentry>
 
       <varlistentry>
-        <term>Example 4 - The network 192.168.1.0/24 except hosts 192.168.1.3
-        and 192.168.1.9</term>
+        <term>IPv4 Example 4 - The network 192.168.1.0/24 except hosts
+        192.168.1.3 and 192.168.1.9</term>
 
         <listitem>
           <para>192.168.1.0/24!192.168.1.3,192.168.1.9</para>
@@ -176,14 +177,6 @@ ACCEPT          all!z2        net         tcp           22</programlisting>
   <refsect1>
     <title>See ALSO</title>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-hosts.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/hosts</command>
+      <command>/etc/shorewall[6]/hosts</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -270,6 +270,8 @@ vpn         ppp+:192.168.3.0/24</programlisting></para>
     <title>FILES</title>
 
     <para>/etc/shorewall/hosts</para>
+
+    <para>/etc/shorewall6/hosts</para>
   </refsect1>
 
   <refsect1>
@@ -278,14 +280,6 @@ vpn         ppp+:192.168.3.0/24</programlisting></para>
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall_interfaces(5), shorewall-ipsets(5),
-    shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5),
-    shorewall-nesting(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-init.xml

@@ -165,14 +165,6 @@
   <refsect1>
     <title>See ALSO</title>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-interfaces.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/interfaces</command>
+      <command>/etc/shorewall[6]/interfaces</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -104,9 +104,7 @@ loc     eth2            -</programlisting>
           <para>You may use wildcards here by specifying a prefix followed by
           the plus sign ("+"). For example, if you want to make an entry that
           applies to all PPP interfaces, use 'ppp+'; that would match ppp0,
-          ppp1, ppp2, … Please note that the '+' means '<emphasis
-          role="bold">one</emphasis> or more additional characters' so 'ppp'
-          does not match 'ppp+'.</para>
+          ppp1, ppp2, …</para>
 
           <para>When using Shorewall versions before 4.1.4, care must be
           exercised when using wildcards where there is another zone that uses
@@ -114,7 +112,10 @@ loc     eth2            -</programlisting>
           url="/manpages/shorewall-nesting.html">shorewall-nesting</ulink>(5)
           for a discussion of this problem.</para>
 
-          <para>Shorewall allows '+' as an interface name.</para>
+          <para>Shorewall allows '+' as an interface name, but that usage is
+          deprecated. A better approach is to specify
+          '<option>physical</option>=+' in the OPTIONS column (see
+          below).</para>
 
           <para>There is no need to define the loopback interface (lo) in this
           file.</para>
@@ -195,27 +196,76 @@ loc     eth2            -</programlisting>
           should have no embedded white-space.</para>
 
           <variablelist>
+            <varlistentry>
+              <term><emphasis
+              role="bold">accept_ra</emphasis>[={0|1|2}]</term>
+
+              <listitem>
+                <para>IPv6 only; added in Shorewall 4.5.16. Values are:</para>
+
+                <variablelist>
+                  <varlistentry>
+                    <term>0</term>
+
+                    <listitem>
+                      <para>Do not accept Router Advertisements.</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>1</term>
+
+                    <listitem>
+                      <para>Accept Route Advertisements if forwarding is
+                      disabled.</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>2</term>
+
+                    <listitem>
+                      <para>Overrule forwarding behavior. Accept Route
+                      Advertisements even if forwarding is enabled.</para>
+                    </listitem>
+                  </varlistentry>
+                </variablelist>
+
+                <para>If the option is specified without a value, then the
+                value 1 is assumed.</para>
+
+                <note>
+                  <para>This option does not work with a wild-card <emphasis
+                  role="bold">physical</emphasis> name (e.g., eth0.+).
+                  Beginning with Shorewall 5.1.10, If this option is
+                  specified, a warning is issued and the option is
+                  ignored.</para>
+                </note>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">arp_filter[={0|1}]</emphasis></term>
 
               <listitem>
-                <para>If specified, this interface will only respond to ARP
-                who-has requests for IP addresses configured on the interface.
-                If not specified, the interface can respond to ARP who-has
-                requests for IP addresses on any of the firewall's interface.
-                The interface must be up when Shorewall is started.</para>
+                <para>IPv4 only. If specified, this interface will only
+                respond to ARP who-has requests for IP addresses configured on
+                the interface. If not specified, the interface can respond to
+                ARP who-has requests for IP addresses on any of the firewall's
+                interface. The interface must be up when Shorewall is
+                started.</para>
 
                 <para>Only those interfaces with the
                 <option>arp_filter</option> option will have their setting
                 changed; the value assigned to the setting will be the value
                 specified (if any) or 1 if no value is given.</para>
 
-                <para/>
-
                 <note>
-                  <para>This option does not work with a wild-card
-                  <replaceable>interface</replaceable> name (e.g., eth0.+) in
-                  the INTERFACE column.</para>
+                  <para>This option does not work with a wild-card <emphasis
+                  role="bold">physical</emphasis> name (e.g., eth0.+).
+                  Beginning with Shorewall 5.1.10, If this option is
+                  specified, a warning is issued and the option is
+                  ignored.</para>
                 </note>
               </listitem>
             </varlistentry>
@@ -225,8 +275,8 @@ loc     eth2            -</programlisting>
               role="bold">arp_ignore</emphasis>[=<emphasis>number</emphasis>]</term>
 
               <listitem>
-                <para>If specified, this interface will respond to arp
-                requests based on the value of <emphasis>number</emphasis>
+                <para>IPv4 only. If specified, this interface will respond to
+                arp requests based on the value of <emphasis>number</emphasis>
                 (defaults to 1).</para>
 
                 <para>1 - reply only if the target IP address is local address
@@ -244,16 +294,14 @@ loc     eth2            -</programlisting>
 
                 <para>8 - do not reply for all local addresses</para>
 
-                <para/>
-
                 <note>
-                  <para>This option does not work with a wild-card
-                  <replaceable>interface</replaceable> name (e.g., eth0.+) in
-                  the INTERFACE column.</para>
+                  <para>This option does not work with a wild-card <emphasis
+                  role="bold">physical</emphasis> name (e.g., eth0.+).
+                  Beginning with Shorewall 5.1.10, If this option is
+                  specified, a warning is issued and the option is
+                  ignored.</para>
                 </note>
 
-                <para/>
-
                 <warning>
                   <para>Do not specify <emphasis
                   role="bold">arp_ignore</emphasis> for any interface involved
@@ -411,8 +459,8 @@ loc     eth2            -</programlisting>
 
                   <listitem>
                     <para>the interface is a <ulink
-                    url="/SimpleBridge.html">simple bridge</ulink> with a
-                    DHCP server on one port and DHCP clients on another
+                    url="/SimpleBridge.html">simple bridge</ulink> with a DHCP
+                    server on one port and DHCP clients on another
                     port.</para>
 
                     <note>
@@ -431,6 +479,25 @@ loc     eth2            -</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis role="bold">forward</emphasis>[={0|1}]</term>
+
+              <listitem>
+                <para>IPv6 only Sets the
+                /proc/sys/net/ipv6/conf/interface/forwarding option to the
+                specified value. If no value is supplied, then 1 is
+                assumed.</para>
+
+                <note>
+                  <para>This option does not work with a wild-card <emphasis
+                  role="bold">physical</emphasis> name (e.g., eth0.+).
+                  Beginning with Shorewall 5.1.10, If this option is
+                  specified, a warning is issued and the option is
+                  ignored.</para>
+                </note>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">ignore[=1]</emphasis></term>
 
@@ -467,15 +534,15 @@ loc     eth2            -</programlisting>
               role="bold">logmartians[={0|1}]</emphasis></term>
 
               <listitem>
-                <para>Turn on kernel martian logging (logging of packets with
-                impossible source addresses. It is strongly suggested that if
-                you set <emphasis role="bold">routefilter</emphasis> on an
-                interface that you also set <emphasis
-                role="bold">logmartians</emphasis>. Even if you do not specify
-                the <option>routefilter</option> option, it is a good idea to
-                specify <option>logmartians</option> because your distribution
-                may have enabled route filtering without you knowing
-                it.</para>
+                <para>IPv4 only. Turn on kernel martian logging (logging of
+                packets with impossible source addresses. It is strongly
+                suggested that if you set <emphasis
+                role="bold">routefilter</emphasis> on an interface that you
+                also set <emphasis role="bold">logmartians</emphasis>. Even if
+                you do not specify the <option>routefilter</option> option, it
+                is a good idea to specify <option>logmartians</option> because
+                your distribution may have enabled route filtering without you
+                knowing it.</para>
 
                 <para>Only those interfaces with the
                 <option>logmartians</option> option will have their setting
@@ -497,9 +564,11 @@ loc     eth2            -</programlisting>
                 <para/>
 
                 <note>
-                  <para>This option does not work with a wild-card
-                  <replaceable>interface</replaceable> name (e.g., eth0.+) in
-                  the INTERFACE column.</para>
+                  <para>This option does not work with a wild-card <emphasis
+                  role="bold">physical</emphasis> name (e.g., eth0.+).
+                  Beginning with Shorewall 5.1.10, If this option is
+                  specified, a warning is issued and the option is
+                  ignored.</para>
                 </note>
 
                 <blockquote>
@@ -576,8 +645,8 @@ loc     eth2            -</programlisting>
               <term><emphasis role="bold">nosmurfs</emphasis></term>
 
               <listitem>
-                <para>Filter packets for smurfs (packets with a broadcast
-                address as the source).</para>
+                <para>IPv4 only. Filter packets for smurfs (packets with a
+                broadcast address as the source).</para>
 
                 <para>Smurfs will be optionally logged based on the setting of
                 SMURF_LOG_LEVEL in <ulink
@@ -596,9 +665,9 @@ loc     eth2            -</programlisting>
                 <itemizedlist>
                   <listitem>
                     <para>a <filename
-                    class="directory">/proc/sys/net/ipv4/conf/</filename>
+                    class="directory">/proc/sys/net/ipv[46]/conf/</filename>
                     entry for the interface cannot be modified (including for
-                    proxy ARP).</para>
+                    proxy ARP or proxy NDP).</para>
                   </listitem>
 
                   <listitem>
@@ -626,7 +695,10 @@ loc     eth2            -</programlisting>
 
                 <para>If the <emphasis>interface</emphasis> name is a wildcard
                 name (ends with '+'), then the physical
-                <emphasis>name</emphasis> must also end in '+'.</para>
+                <emphasis>name</emphasis> must also end in '+'. The physical
+                <replaceable>name</replaceable> may end in '+' (or be exactly
+                '+') when the <replaceable>interface</replaceable> name is not
+                a wildcard name.</para>
 
                 <para>If <option>physical</option> is not specified, then it's
                 value defaults to the <emphasis>interface</emphasis>
@@ -638,7 +710,7 @@ loc     eth2            -</programlisting>
               <term><emphasis role="bold">proxyarp[={0|1}]</emphasis></term>
 
               <listitem>
-                <para>Sets
+                <para>IPv4 only. Sets
                 /proc/sys/net/ipv4/conf/<emphasis>interface</emphasis>/proxy_arp.
                 Do NOT use this option if you are employing Proxy ARP through
                 entries in <ulink
@@ -648,9 +720,13 @@ loc     eth2            -</programlisting>
                 url="http://tldp.org/HOWTO/Proxy-ARP-Subnet/index.html">http://tldp.org/HOWTO/Proxy-ARP-Subnet/index.html.
                 </ulink></para>
 
-                <para><emphasis role="bold">Note</emphasis>: This option does
-                not work with a wild-card <replaceable>interface</replaceable>
-                name (e.g., eth0.+) in the INTERFACE column.</para>
+                <note>
+                  <para>This option does not work with a wild-card <emphasis
+                  role="bold">physical</emphasis> name (e.g., eth0.+).
+                  Beginning with Shorewall 5.1.10, If this option is
+                  specified, a warning is issued and the option is
+                  ignored.</para>
+                </note>
 
                 <para>Only those interfaces with the <option>proxyarp</option>
                 option will have their setting changed; the value assigned to
@@ -659,6 +735,28 @@ loc     eth2            -</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis role="bold">proxyndp</emphasis>[={0|1}]</term>
+
+              <listitem>
+                <para>IPv6 only. Sets
+                /proc/sys/net/ipv6/conf/<emphasis>interface</emphasis>/proxy_ndp.</para>
+
+                <note>
+                  <para>This option does not work with a wild-card <emphasis
+                  role="bold">physical</emphasis> name (e.g., eth0.+).
+                  Beginning with Shorewall 5.1.10, If this option is
+                  specified, a warning is issued and the option is
+                  ignored.</para>
+                </note>
+
+                <para>Only those interfaces with the <option>proxyndp</option>
+                option will have their setting changed; the value assigned to
+                the setting will be the value specified (if any) or 1 if no
+                value is given.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">required</emphasis></term>
 
@@ -700,8 +798,8 @@ loc     eth2            -</programlisting>
               role="bold">routefilter[={0|1|2}]</emphasis></term>
 
               <listitem>
-                <para>Turn on kernel route filtering for this interface
-                (anti-spoofing measure).</para>
+                <para>IPv4 only. Turn on kernel route filtering for this
+                interface (anti-spoofing measure).</para>
 
                 <para>Only those interfaces with the
                 <option>routefilter</option> option will have their setting
@@ -714,9 +812,11 @@ loc     eth2            -</programlisting>
                 filtering.</para>
 
                 <note>
-                  <para>This option does not work with a wild-card
-                  <replaceable>interface</replaceable> name (e.g., eth0.+) in
-                  the INTERFACE column.</para>
+                  <para>This option does not work with a wild-card <emphasis
+                  role="bold">physical</emphasis> name (e.g., eth0.+).
+                  Beginning with Shorewall 5.1.10, If this option is
+                  specified, a warning is issued and the option is
+                  ignored.</para>
                 </note>
 
                 <para>This option can also be enabled globally via the
@@ -825,9 +925,11 @@ loc     eth2            -</programlisting>
                 specified (if any) or 1 if no value is given.</para>
 
                 <note>
-                  <para>This option does not work with a wild-card
-                  <replaceable>interface</replaceable> name (e.g., eth0.+) in
-                  the INTERFACE column.</para>
+                  <para>This option does not work with a wild-card <emphasis
+                  role="bold">physical</emphasis> name (e.g., eth0.+).
+                  Beginning with Shorewall 5.1.10, If this option is
+                  specified, a warning is issued and the option is
+                  ignored.</para>
                 </note>
               </listitem>
             </varlistentry>
@@ -886,10 +988,13 @@ loc     eth2            -</programlisting>
                       role="bold">routefilter</emphasis></member>
 
                       <member><emphasis
-                      role="bold">sourceroute</emphasis></member>
+                      role="bold">proxyarp</emphasis></member>
 
                       <member><emphasis
-                      role="bold">proxyndp</emphasis></member>
+                      role="bold">proxyudp</emphasis></member>
+
+                      <member><emphasis
+                      role="bold">sourceroute</emphasis></member>
                     </simplelist>
                   </listitem>
                 </itemizedlist>
@@ -902,7 +1007,9 @@ loc     eth2            -</programlisting>
               <listitem>
                 <para>Incoming requests from this interface may be remapped
                 via UPNP (upnpd). See <ulink
-                url="/UPnP.html">http://www.shorewall.net/UPnP.html</ulink>.</para>
+                url="/UPnP.html">http://www.shorewall.net/UPnP.html</ulink>.
+                Supported in IPv4 and in IPv6 in Shorewall 5.1.4 and
+                later.</para>
               </listitem>
             </varlistentry>
 
@@ -916,7 +1023,8 @@ loc     eth2            -</programlisting>
                 causes Shorewall to detect the default gateway through the
                 interface and to accept UDP packets from that gateway. Note
                 that, like all aspects of UPnP, this is a security hole so use
-                this option at your own risk.</para>
+                this option at your own risk. Supported in IPv4 and in IPv6 in
+                Shorewall 5.1.4 and later.</para>
               </listitem>
             </varlistentry>
 
@@ -943,7 +1051,7 @@ loc     eth2            -</programlisting>
 
     <variablelist>
       <varlistentry>
-        <term>Example 1:</term>
+        <term>IPv4 Example 1:</term>
 
         <listitem>
           <para>Suppose you have eth0 connected to a DSL modem and eth1
@@ -956,7 +1064,7 @@ loc     eth2            -</programlisting>
 
           <para>Your entries for this setup would look like:</para>
 
-          <programlisting>FORMAT 1
+          <programlisting>?FORMAT 1
 #ZONE   INTERFACE BROADCAST        OPTIONS
 net     eth0      206.191.149.223  dhcp
 loc     eth1      192.168.1.255
@@ -971,7 +1079,7 @@ dmz     eth2      192.168.2.255</programlisting>
           <para>The same configuration without specifying broadcast addresses
           is:</para>
 
-          <programlisting>FORMAT 2
+          <programlisting>?FORMAT 2
 #ZONE   INTERFACE OPTIONS
 net     eth0      dhcp
 loc     eth1      
@@ -986,7 +1094,7 @@ dmz     eth2</programlisting>
           <para>You have a simple dial-in system with no Ethernet
           connections.</para>
 
-          <programlisting>FORMAT 2
+          <programlisting>?FORMAT 2
 #ZONE   INTERFACE OPTIONS
 net     ppp0      -</programlisting>
         </listitem>
@@ -999,7 +1107,7 @@ net     ppp0      -</programlisting>
           <para>You have a bridge with no IP address and you want to allow
           traffic through the bridge.</para>
 
-          <programlisting>FORMAT 2
+          <programlisting>?FORMAT 2
 #ZONE   INTERFACE OPTIONS
 -       br0       bridge</programlisting>
         </listitem>
@@ -1011,6 +1119,8 @@ net     ppp0      -</programlisting>
     <title>FILES</title>
 
     <para>/etc/shorewall/interfaces</para>
+
+    <para>/etc/shorewall6/interfaces</para>
   </refsect1>
 
   <refsect1>
@@ -1019,13 +1129,6 @@ net     ppp0      -</programlisting>
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall-maclist(5),
-    shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5),
-    shorewall-params(5), shorewall-policy(5), shorewall-providers(5),
-    shorewall-proxyarp(5), shorewall-rtrules(5), shorewall-routestopped(5),
-    shorewall-rules(5), shorewall.conf(5), shorewall-secmarks(5),
-    shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-mangle(5),
-    shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-ipsets.xml

@@ -251,34 +251,44 @@
 
     <para>/etc/shorewall/accounting</para>
 
+    <para>/etc/shorewall6/accounting</para>
+
     <para>/etc/shorewall/blrules</para>
 
+    <para>/etc/shorewall6/blrules</para>
+
     <para>/etc/shorewall/hosts -- <emphasis role="bold">Note:</emphasis>
     Multiple matches enclosed in +[...] may not be used in this file.</para>
 
+    <para>/etc/shorewall6/hosts -- <emphasis role="bold">Note:</emphasis>
+    Multiple matches enclosed in +[...] may not be used in this file.</para>
+
     <para>/etc/shorewall/maclist -- <emphasis role="bold">Note:</emphasis>
     Multiple matches enclosed in +[...] may not be used in this file.</para>
 
-    <para>/etc/shorewall/masq</para>
+    <para>/etc/shorewall6/maclist -- <emphasis role="bold">Note:</emphasis>
+    Multiple matches enclosed in +[...] may not be used in this file.</para>
 
     <para>/etc/shorewall/rules</para>
 
+    <para>/etc/shorewall6/rules</para>
+
     <para>/etc/shorewall/secmarks</para>
 
+    <para>/etc/shorewall6/secmarks</para>
+
     <para>/etc/shorewall/mangle</para>
+
+    <para>/etc/shorewall6/mangle</para>
+
+    <para>/etc/shorewall/snat</para>
+
+    <para>/etc/shorewall6/snat</para>
   </refsect1>
 
   <refsect1>
     <title>See ALSO</title>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5),
-    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-logging.xml

@@ -0,0 +1,385 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
+<refentry>
+  <refmeta>
+    <refentrytitle>shorewall-logging</refentrytitle>
+
+    <manvolnum>5</manvolnum>
+
+    <refmiscinfo>Configuration Files</refmiscinfo>
+  </refmeta>
+
+  <refnamediv>
+    <refname>logging</refname>
+
+    <refpurpose>Shorewall logging</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <cmdsynopsis>
+      <command><replaceable>action</replaceable>:<replaceable>level</replaceable></command>
+    </cmdsynopsis>
+
+    <cmdsynopsis>
+      <command>NFLOG(<replaceable>nflog-parameters</replaceable>)</command>
+    </cmdsynopsis>
+
+    <cmdsynopsis>
+      <command>ULOG(<replaceable>ulog-parameters</replaceable>)</command>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>The disposition of packets entering a Shorewall firewall is
+    determined by one of a number of Shorewall facilities. Only some of these
+    facilities permit logging.</para>
+
+    <orderedlist>
+      <listitem>
+        <para>The packet is part of an established connection. While the
+        packet can be logged using LOG rules in the ESTABLISHED section of
+        <ulink
+        url="manpages/shorewall-rules.html">/etc/shorewall/rules</ulink>, that
+        is not recommended because of the large amount of information that may
+        be logged.</para>
+      </listitem>
+
+      <listitem>
+        <para>The packet represents a connection request that is related to an
+        established connection (such as a <ulink url="FTP.html">data
+        connection associated with an FTP control connection</ulink>). These
+        packets may be logged using LOG rules in the RELATED section of <ulink
+        url="manpages/shorewall-rules.html">shorewall-rules(5)</ulink>.</para>
+      </listitem>
+
+      <listitem>
+        <para>The packet is rejected because of an option in <ulink
+        url="manpages/shorewall.conf.html">shorewall.conf</ulink>(5) or <ulink
+        url="manpages/shorewall-interfaces.html">shorewall-interfaces(5)</ulink>.
+        These packets can be logged by setting the appropriate logging-related
+        option in <ulink
+        url="manpages/shorewall.conf.html">/etc/shorewall/shorewall.conf</ulink>.</para>
+      </listitem>
+
+      <listitem>
+        <para>The packet matches a rule in <ulink
+        url="manpages/shorewall-rules.html">shorewall-rules</ulink>(5). By
+        including a syslog level (see below) in the ACTION column of a rule
+        (e.g., <quote>ACCEPT<emphasis role="bold">:info</emphasis> net $FW tcp
+        22</quote>), the connection attempt will be logged at that
+        level.</para>
+      </listitem>
+
+      <listitem>
+        <para>The packet doesn't match a rule so it is handled by a policy
+        defined in <ulink
+        url="manpages/shorewall-policy.html">shorewall-policy(5)</ulink>.
+        These may be logged by specifying a syslog level in the LOG LEVEL
+        column of the policy's entry (e.g., <quote>loc net ACCEPT <emphasis
+        role="bold">info</emphasis></quote>).</para>
+      </listitem>
+    </orderedlist>
+  </refsect1>
+
+  <refsect1>
+    <title>Default Logging</title>
+
+    <para>By default, Shorewall directs Netfilter to log using syslog (8).
+    Syslog classifies log messages by a <emphasis>facility</emphasis> and a
+    <emphasis>priority</emphasis> (using the notation
+    <emphasis>facility.priority</emphasis>).</para>
+
+    <para>The facilities defined by syslog are <emphasis>auth, authpriv, cron,
+    daemon, kern, lpr, mail, mark, news, syslog, user, uucp</emphasis> and
+    <emphasis>local0</emphasis> through <emphasis>local7.</emphasis></para>
+
+    <para>Throughout the Shorewall documentation, the term
+    <emphasis>level</emphasis> rather than <emphasis>priority is used,
+    </emphasis>since <emphasis>level</emphasis> is the term used by Netfilter.
+    The syslog documentation uses the term
+    <emphasis>priority</emphasis>.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>Syslog Levels</title>
+
+    <para>Syslog levels are a method of describing to syslog (8) the
+    importance of a message. A number of Shorewall parameters have a syslog
+    level as their value.</para>
+
+    <para>Valid levels are:</para>
+
+    <simplelist>
+      <member>7 - <emphasis role="bold">debug</emphasis> (Debug-level
+      messages)</member>
+
+      <member>6 - <emphasis role="bold">info</emphasis>
+      (Informational)</member>
+
+      <member>5 - <emphasis role="bold">notice</emphasis> (Normal but
+      significant Condition)</member>
+
+      <member>4 - <emphasis role="bold">warning</emphasis> (Warning
+      Condition)</member>
+
+      <member>3 - <emphasis role="bold">err</emphasis> (Error
+      Condition)</member>
+
+      <member>2 - <emphasis role="bold">crit</emphasis> (Critical
+      Conditions)</member>
+
+      <member>1 - <emphasis role="bold">alert</emphasis> (must be handled
+      immediately)</member>
+
+      <member>0 - <emphasis role="bold">emerg</emphasis> (System is
+      unusable)</member>
+    </simplelist>
+
+    <para>For most Shorewall logging, a level of 6 (info) is appropriate.
+    Shorewall log messages are generated by Netfilter and are logged using the
+    <emphasis>kern</emphasis> facility and the level that you specify. If you
+    are unsure of the level to choose, 6 (info) is a safe bet. You may specify
+    levels by name or by number.</para>
+
+    <para>Beginning with Shorewall 4.5.5, the <replaceable>level</replaceable>
+    name or number may be optionally followed by a comma-separated list of one
+    or more<replaceable> log options</replaceable>. The list is enclosed in
+    parentheses. Log options cause additional information to be included in
+    each log message.</para>
+
+    <para>Valid log options are:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term><emphasis role="bold">ip_options</emphasis></term>
+
+        <listitem>
+          <para>Log messages will include the option settings from the IP
+          header.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">macdecode</emphasis></term>
+
+        <listitem>
+          <para>Decode the MAC address and protocol.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">tcp_sequence</emphasis></term>
+
+        <listitem>
+          <para>Include TCP sequence numbers.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">tcp_options</emphasis></term>
+
+        <listitem>
+          <para>Include options from the TCP header.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">uid</emphasis></term>
+
+        <listitem>
+          <para>Include the UID of the sending program; only valid for packets
+          originating on the firewall itself.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+
+    <para>Example: <emphasis
+    role="bold">info(tcp_options,tcp_sequence)</emphasis></para>
+
+    <para>Syslogd writes log messages to files (typically in <filename
+    class="directory">/var/log/</filename>*) based on their facility and
+    level. The mapping of these facility/level pairs to log files is done in
+    /etc/syslog.conf (5). If you make changes to this file, you must restart
+    syslogd before the changes can take effect.</para>
+
+    <para>Syslog may also write to your system console. See <ulink
+    url="FAQ.htm#faq16">Shorewall FAQ 16</ulink> for ways to avoid having
+    Shorewall messages written to the console.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>Configuring a Separate Log for Shorewall Messages (ulogd)</title>
+
+    <para>There are a couple of limitations to syslogd-based logging:</para>
+
+    <orderedlist>
+      <listitem>
+        <para>If you give, for example, kern.info its own log destination then
+        that destination will also receive all kernel messages of levels 5
+        (notice) through 0 (emerg).</para>
+      </listitem>
+
+      <listitem>
+        <para>All kernel.info messages will go to that destination and not
+        just those from Netfilter.</para>
+      </listitem>
+
+      <listitem>
+        <para>Netfilter (Shorewall) messages show up in
+        <command>dmesg</command>.</para>
+      </listitem>
+    </orderedlist>
+
+    <para>If your kernel has NFLOG target support (and most vendor-supplied
+    kernels do), you may also specify a log level of NFLOG (must be all caps).
+    When NFLOG is used, Shorewall will direct Netfilter to log the related
+    messages via the NFLOG target which will send them to a process called
+    <quote>ulogd</quote>. The ulogd program is included in most
+    distributions.</para>
+
+    <note>
+      <para>The NFLOG logging mechanism is <emphasis
+      role="underline">completely separate</emphasis> from syslog. Once you
+      switch to NFLOG, the settings in <filename>/etc/syslog.conf</filename>
+      have absolutely no effect on your Shorewall logging (except for
+      Shorewall status messages which still go to syslog).</para>
+    </note>
+
+    <para>You will need to change all instances of log levels (usually
+    <quote>info</quote>) in your Shorewall configuration files to
+    <quote>NFLOG</quote> - this includes entries in the policy, rules and
+    shorewall.conf files. If you initially installed using Shorewall 5.1.2 or
+    later, you can simply change the setting of LOG_LEVEL in
+    shorewall.conf.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>Understanding the Contents of Shorewall Log Messages</title>
+
+    <para>For general information on the contents of Netfilter log messages,
+    see <ulink
+    url="http://logi.cc/en/2010/07/netfilter-log-format/">http://logi.cc/en/2010/07/netfilter-log-format/</ulink>.</para>
+
+    <para>For Shorewall-specific information, see <ulink
+    url="/FAQ.htm#faq17">FAQ #17</ulink>.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>Customizing the Content of Shorewall Log Messages</title>
+
+    <para>In a Shorewall logging rule, the log level can be followed by a
+    <firstterm>log tag</firstterm> as in "DROP:NFLOG:junk". The generated log
+    message will include "<emphasis>chain-name</emphasis> junk DROP".</para>
+
+    <para>By setting the LOGTAGONLY option to Yes in <ulink
+    url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink> or <ulink
+    url="/manpages6/shorewall6.conf.html">shorewall6.conf(5)</ulink>, the
+    disposition ('DROP' in the above example) will be omitted. Consider the
+    following rule:</para>
+
+    <programlisting>#ACTION                                    SOURCE          DEST           PROTO
+REJECT(icmp-proto-unreachable):notice:IPv6 loc             net            41      # who's using IPv6 tunneling</programlisting>
+
+    <para>This rule generates the following warning at compile time:</para>
+
+    <simplelist>
+      <member>WARNING: Log Prefix shortened to "Shorewall:IPv6:REJECT(icmp-p "
+      /etc/shorewall/rules (line 212)</member>
+    </simplelist>
+
+    <para>and produces the rather ugly prefix "Shorewall:IPv6:REJECT(icmp-p
+    ".</para>
+
+    <para>Now consider this similar rule:</para>
+
+    <programlisting>#ACTION                                              SOURCE          DEST           PROTO
+REJECT(icmp-proto-unreachable):notice:IPv6,tunneling loc             net            41      # who's using IPv6 tunneling</programlisting>
+
+    <para>With LOGTAGONLY=Yes, no warning is generated and the prefix becomes
+    "Shorewall:IPv6:tunneling:"</para>
+
+    <para>See the <ulink url="shorewall.conf.html">shorewall[6].conf man
+    page</ulink> for further information about how LOGTAGONLY=Yes can be
+    used.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>Log Backends</title>
+
+    <para>Netfilter logging allows configuration of multiple backends. Logging
+    backends provide the The low-level forward of log messages. There are
+    currently three backends:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term>LOG (ipt_LOG and ip6t_LOG).</term>
+
+        <listitem>
+          <para>Normal kernel-based logging to a syslog daemon.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>ULOG (ipt_ULOG)</term>
+
+        <listitem>
+          <para>ULOG logging as described ablve. Only available for
+          IPv4.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>netlink (nfnetlink_log)</term>
+
+        <listitem>
+          <para>The logging backend behind NFLOG, defined above.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+
+    <para>The currently-available and currently-selected IPv4 and IPv6
+    backends are shown in /proc/sys/net/netfilter/nf_log:</para>
+
+    <programlisting>cat /proc/net/netfilter/nf_log
+ 0 NONE (nfnetlink_log)
+ 1 NONE (nfnetlink_log)
+ 2 ipt_ULOG (ipt_ULOG,ipt_LOG,nfnetlink_log)
+ 3 NONE (nfnetlink_log)
+ 4 NONE (nfnetlink_log)
+ 5 NONE (nfnetlink_log)
+ 6 NONE (nfnetlink_log)
+ 7 NONE (nfnetlink_log)
+ 8 NONE (nfnetlink_log)
+ 9 NONE (nfnetlink_log)
+10 ip6t_LOG (ip6t_LOG,nfnetlink_log)
+11 NONE (nfnetlink_log)
+12 NONE (nfnetlink_log)</programlisting>
+
+    <para>The magic numbers (0-12) are Linux address family numbers (AF_INET
+    is 2 and AF_INET6 is 10).</para>
+
+    <para>The name immediately following the number is the currently-selected
+    backend, and the ones in parentheses are the ones that are available. You
+    can change the currently selected backend by echoing it's name into
+    /proc/net/netfilter/nf_log.<replaceable>number</replaceable>.</para>
+
+    <para>Example - change the IPv4 backend to LOG:</para>
+
+    <programlisting>sysctl net.netfilter.nf_log.2=ipt_LOG</programlisting>
+
+    <para>Beginning with Shorewall 4.6.4, you can configure the backend using
+    the LOG_BACKEND option in <ulink
+    url="manpages/shorewall.conf.html">shorewall.conf(5)</ulink> and <ulink
+    url="manpages6/shorewall6.conf.html">shorewall6.conf(5)</ulink>.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>SEE ALSO</title>
+
+    <para><ulink
+    url="/shorewall_logging.htm">http://www.shorewall.net/shorewall_logging.html</ulink></para>
+  </refsect1>
+</refentry>

Shorewall/manpages/shorewall-maclist.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/maclist</command>
+      <command>/etc/shorewall[6]/maclist</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -97,6 +97,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/maclist</para>
+
+    <para>/etc/shorewall6/maclist</para>
   </refsect1>
 
   <refsect1>
@@ -108,14 +110,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-masq(5), shorewall-nat(5),
-    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-mangle.xml

@@ -18,31 +18,17 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/mangle</command>
+      <command>/etc/shorewall[6]/mangle</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
   <refsect1>
     <title>Description</title>
 
-    <para>This file was introduced in Shorewall 4.6.0 and is intended to
-    replace <ulink
+    <para>This file was introduced in Shorewall 4.6.0 and replaces <ulink
     url="/manpages/shorewall-tcrules.html">shorewall-tcrules(5)</ulink>. This
     file is only processed by the compiler if:</para>
 
-    <orderedlist numeration="loweralpha">
-      <listitem>
-        <para>No file named 'tcrules' exists on the current CONFIG_PATH (see
-        <ulink url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>);
-        or</para>
-      </listitem>
-
-      <listitem>
-        <para>The first file named 'tcrules' found on the CONFIG_PATH contains
-        no non-commentary entries.</para>
-      </listitem>
-    </orderedlist>
-
     <para>Entries in this file cause packets to be marked as a means of
     classifying them for traffic control or policy routing.</para>
 
@@ -117,9 +103,7 @@
           SOURCE is $FW, the generated rule is always placed in the OUTPUT
           chain. If DEST is '$FW', then the rule is placed in the INPUT chain.
           Additionally, a <replaceable>chain-designator</replaceable> may not
-          be specified in an action body unless the action is declared as
-          <option>inline</option> in <ulink
-          url="/manpages6/shorewall6-actions.html">shorewall-actions</ulink>(5).</para>
+          be specified in an action body.</para>
 
           <para>Where a command takes parameters, those parameters are
           enclosed in parentheses ("(....)") and separated by commas.</para>
@@ -365,8 +349,9 @@ DIVERTHA        -               -               tcp</programlisting>
 
               <listitem>
                 <para>Added in Shorewall 5.0.6 as an alternative to entries in
-                <ulink url="/manpages/shorewall-ecn.html">shorewall-ecn(5)</ulink>. If a
-                PROTO is specified, it must be 'tcp' (6). If no PROTO is
+                <ulink
+                url="/manpages/shorewall-ecn.html">shorewall-ecn(5)</ulink>.
+                If a PROTO is specified, it must be 'tcp' (6). If no PROTO is
                 supplied, TCP is assumed. This action causes all ECN bits in
                 the TCP header to be cleared.</para>
               </listitem>
@@ -689,6 +674,43 @@ SAME              $FW            0.0.0.0/0    tcp        80,443</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">TCPMSS</emphasis>([<replaceable>mss</replaceable>[,<replaceable>ipsec</replaceable>]])</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.1.9. This target only applies to
+                TCP traffic and alters the MSS value in SYN packets. It may be
+                used in the FORWARD and POSTROUTING chains; the default is
+                FORWARD.</para>
+
+                <para>The <replaceable>mss</replaceable> parameter may be
+                either <option>pmtu</option> or an integer in the range
+                500:65533. The value <option>pmtu</option> automatically
+                clamps the MSS value to (path_MTU - 40 for IPv4; -60 for
+                IPv6). This may not function as desired where asymmetric
+                routes with differing path MTU exist — the kernel uses the
+                path MTU which it would use to send packets from itself to the
+                source and destination IP addresses. Prior to Linux 2.6.25,
+                only the path MTU to the destination IP address was considered
+                by this option; subsequent kernels also consider the path MTU
+                to the source IP address. If an integer is given, the MSS
+                option is set to the specified value. If the MSS of the packet
+                is already lower than <replaceable>mss</replaceable>, it will
+                not be increased (from Linux 2.6.25 onwards) to avoid more
+                problems with hosts relying on a proper MSS. If
+                <replaceable>mss</replaceable> is omitted,
+                <option>pmtu</option> is assumed.</para>
+
+                <para>The <replaceable>ipsec</replaceable> parameter
+                determines whether the rule applies to IPSEC traffic
+                (<option>ipsec</option> is passed), non-IPSEC traffic
+                (<option>none</option> is passed) or both
+                (<option>all</option> is passed). If omitted,
+                <option>all</option> is assumed.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">TOS</emphasis>(<replaceable>tos</replaceable>[/<replaceable>mask</replaceable>])</term>
@@ -725,7 +747,7 @@ Normal-Service       =&gt; 0x00</programlisting>
 
             <varlistentry>
               <term><emphasis
-              role="bold">TPROXY</emphasis>([<replaceable>port</replaceable>][,<replaceable>address</replaceable>])</term>
+              role="bold">TPROXY</emphasis>([<replaceable>port</replaceable>[,<replaceable>address</replaceable>]])</term>
 
               <listitem>
                 <para>Transparently redirects a packet without altering the IP
@@ -915,7 +937,8 @@ Normal-Service       =&gt; 0x00</programlisting>
                 Matches packets leaving the firewall through the named
                 interface. May not be used in the PREROUTING chain (:P in the
                 mark column or no chain qualifier and MARK_IN_FORWARD_CHAIN=No
-                in <ulink url="/manpages/shorewall.conf">shorewall.conf</ulink>
+                in <ulink
+                url="/manpages/shorewall.conf">shorewall.conf</ulink>
                 (5)).</para>
               </listitem>
             </varlistentry>
@@ -1543,7 +1566,7 @@ Normal-Service       =&gt; 0x00</programlisting>
 
     <variablelist>
       <varlistentry>
-        <term>Example 1:</term>
+        <term>IPv4 Example 1:</term>
 
         <listitem>
           <para>Mark all ICMP echo traffic with packet mark 1. Mark all peer
@@ -1572,7 +1595,7 @@ Normal-Service       =&gt; 0x00</programlisting>
       </varlistentry>
 
       <varlistentry>
-        <term>Example 2:</term>
+        <term>IPv4 Example 2:</term>
 
         <listitem>
           <para>SNAT outgoing connections on eth0 from 192.168.1.0/24 in
@@ -1584,12 +1607,41 @@ Normal-Service       =&gt; 0x00</programlisting>
        #ACTION            SOURCE         DEST         PROTO   DPORT         SPORT   USER    TEST
        CONNMARK(1-3):F    192.168.1.0/24 eth0 ; state=NEW
 
-/etc/shorewall/masq:
+/etc/shorewall/snat:
 
-       #INTERFACE SOURCE         ADDRESS     ...
-       eth0       192.168.1.0/24 1.1.1.1 ; mark=1:C
-       eth0       192.168.1.0/24 1.1.1.3 ; mark=2:C
-       eth0       192.168.1.0/24 1.1.1.4 ; mark=3:C</programlisting>
+       #ACTION          SOURCE              DEST     ...
+       SNAT(1.1.1.1)    eth0:192.168.1.0/24 - { mark=1:C }
+       SNAT(1.1.1.3)    eth0:192.168.1.0/24 - { mark=2:C }
+       SNAT(1.1.1.4)    eth0:192.168.1.0/24 - { mark=3:C }</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 1:</term>
+
+        <listitem>
+          <para>Mark all ICMP echo traffic with packet mark 1. Mark all peer
+          to peer traffic with packet mark 4.</para>
+
+          <para>This is a little more complex than otherwise expected. Since
+          the ipp2p module is unable to determine all packets in a connection
+          are P2P packets, we mark the entire connection as P2P if any of the
+          packets are determined to match.</para>
+
+          <para>We assume packet/connection mark 0 means unclassified.</para>
+
+          <programlisting>       #ACTION    SOURCE    DEST         PROTO   DPORT         SPORT   USER    TEST
+       MARK(1):T  ::/0      ::/0         icmp    echo-request
+       MARK(1):T  ::/0      ::/0         icmp    echo-reply
+       RESTORE:T  ::/0      ::/0         all     -             -       -       0
+       CONTINUE:T ::/0      ::/0         all     -             -       -       !0
+       MARK(4):T  ::/0      ::/0         ipp2p:all
+       SAVE:T     ::/0      ::/0         all     -             -       -       !0</programlisting>
+
+          <para>If a packet hasn't been classified (packet mark is 0), copy
+          the connection mark to the packet mark. If the packet mark is set,
+          we're done. If the packet is P2P, set the packet mark to 4. If the
+          packet mark has been set, save it to the connection mark.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -1599,6 +1651,8 @@ Normal-Service       =&gt; 0x00</programlisting>
     <title>FILES</title>
 
     <para>/etc/shorewall/mangle</para>
+
+    <para>/etc/shorewall6/mangle</para>
   </refsect1>
 
   <refsect1>
@@ -1616,14 +1670,6 @@ Normal-Service       =&gt; 0x00</programlisting>
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-ecn(5), shorewall-exclusion(5),
-    shorewall-hosts(5), shorewall_interfaces(5), shorewall-ipsets(5),
-    shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5),
-    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-masq.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/masq</command>
+      <command>/etc/shorewall[6]/masq</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -579,7 +579,7 @@
 
     <variablelist>
       <varlistentry>
-        <term>Example 1:</term>
+        <term>IPv4 Example 1:</term>
 
         <listitem>
           <para>You have a simple masquerading setup where eth0 connects to a
@@ -594,7 +594,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 2:</term>
+        <term>IPv4 Example 2:</term>
 
         <listitem>
           <para>You add a router to your local network to connect subnet
@@ -607,7 +607,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 3:</term>
+        <term>IPv4 Example 3:</term>
 
         <listitem>
           <para>You have an IPSEC tunnel through ipsec0 and you want to
@@ -620,7 +620,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 4:</term>
+        <term>IPv4 Example 4:</term>
 
         <listitem>
           <para>You want all outgoing traffic from 192.168.1.0/24 through eth0
@@ -634,7 +634,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 5:</term>
+        <term>IPv4 Example 5:</term>
 
         <listitem>
           <para>You want all outgoing SMTP traffic entering the firewall from
@@ -654,7 +654,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 6:</term>
+        <term>IPv4 Example 6:</term>
 
         <listitem>
           <para>Connections leaving on eth0 and destined to any host defined
@@ -667,7 +667,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 7:</term>
+        <term>IPv4 Example 7:</term>
 
         <listitem>
           <para>SNAT outgoing connections on eth0 from 192.168.1.0/24 in
@@ -689,7 +689,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 8:</term>
+        <term>IPv4 Example 8:</term>
 
         <listitem>
           <para>Your eth1 has two public IP addresses: 70.90.191.121 and
@@ -716,6 +716,49 @@
 </programlisting>
         </listitem>
       </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 1:</term>
+
+        <listitem>
+          <para>You have a simple 'masquerading' setup where eth0 connects to
+          a DSL or cable modem and eth1 connects to your local network with
+          subnet 2001:470:b:787::0/64</para>
+
+          <para>Your entry in the file will be:</para>
+
+          <programlisting>        #INTERFACE   SOURCE                  ADDRESS
+        eth0         2001:470:b:787::0/64    -</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 2:</term>
+
+        <listitem>
+          <para>Your sit1 interface has two public IP addresses:
+          2001:470:a:227::1 and 2001:470:b:227::1. You want to use the
+          iptables statistics match to masquerade outgoing connections evenly
+          between these two addresses.</para>
+
+          <programlisting>/etc/shorewall/masq:
+
+       #INTERFACE    SOURCE         ADDRESS 
+       INLINE(sit1)  ::/0           2001:470:a:227::1 ;  -m statistic --mode random --probability 0.50
+       sit1          ::/0           2001:470:a:227::2 
+</programlisting>
+
+          <para>If INLINE_MATCHES=Yes in <ulink
+          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5),
+          then these rules may be specified as follows:</para>
+
+          <programlisting>/etc/shorewall/masq:
+
+       #INTERFACE    SOURCE         ADDRESS 
+       sit1          ::/0           2001:470:a:227::1 ;  -m statistic --mode random --probability 0.50
+       sit1          ::/0           2001:470:a:227::2</programlisting>
+        </listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 
@@ -723,6 +766,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/masq</para>
+
+    <para>/etc/shorewall6/masq</para>
   </refsect1>
 
   <refsect1>
@@ -731,14 +776,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-exclusion(5), shorewall-hosts(5),
-    shorewall_interfaces(5), shorewall-ipsets(5), shorewall-maclist(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-modules.xml

@@ -18,11 +18,11 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/usr/share/shorewall/modules</command>
+      <command>/usr/share/shorewall[6]/modules</command>
     </cmdsynopsis>
 
     <cmdsynopsis>
-      <command>/usr/share/shorewall/helpers</command>
+      <command>/usr/share/shorewall[6]/helpers</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -51,7 +51,7 @@
 
     <para>The <replaceable>modulename</replaceable> names a kernel module
     (without suffix). Shorewall will search for modules based on your
-    MODULESDIR and MODULE_SUFFIX settings in <ulink
+    MODULESDIR setting in <ulink
     url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(8). The
     <replaceable>moduleoption</replaceable>s are passed to modprobe (if
     installed) or to insmod.</para>
@@ -82,19 +82,19 @@
     <para>/etc/shorewall/modules</para>
 
     <para>/etc/shorewall/helpers</para>
+
+    <para>/usr/share/shorewall6/modules</para>
+
+    <para>/usr/share/shorewall6/helpers</para>
+
+    <para>/etc/shorewall6/modules</para>
+
+    <para>/etc/shorewall6/helpers</para>
   </refsect1>
 
   <refsect1>
     <title>See ALSO</title>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-nat.xml

@@ -34,6 +34,8 @@
       url="/FAQ.htm#faq1">http://www.shorewall.net/FAQ.htm#faq1</ulink>. Also,
       in many cases, Proxy ARP (<ulink
       url="/manpages/shorewall-proxyarp.html">shorewall-proxyarp</ulink>(5))
+      or Proxy-NDP(<ulink
+      url="/manpages6/shorewall6-proxyndp.html">shorewall6-proxyndp</ulink>(5))
       is a better solution that one-to-one NAT.</para>
     </warning>
 
@@ -208,6 +210,8 @@ all		all		REJECT		info
     <title>FILES</title>
 
     <para>/etc/shorewall/nat</para>
+
+    <para>/etc/shorewall6/nat</para>
   </refsect1>
 
   <refsect1>
@@ -219,14 +223,6 @@ all		all		REJECT		info
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-nesting.xml

@@ -200,6 +200,16 @@
     <para>/etc/shorewall/policy</para>
 
     <para>/etc/shorewall/rules</para>
+
+    <para>/etc/shorewall6/zones</para>
+
+    <para>/etc/shorewall6/interfaces</para>
+
+    <para>/etc/shorewall6/hosts</para>
+
+    <para>/etc/shorewall6/policy</para>
+
+    <para>/etc/shorewall6/rules</para>
   </refsect1>
 
   <refsect1>

Shorewall/manpages/shorewall-netmap.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/netmap</command>
+      <command>/etc/shorewall[6]/netmap</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -44,8 +44,6 @@
         role="bold">SNAT}</emphasis></term>
 
         <listitem>
-          <para>Must be DNAT or SNAT</para>
-
           <para>If DNAT, traffic entering INTERFACE and addressed to NET1 has
           its destination address rewritten to the corresponding address in
           NET2.</para>
@@ -169,6 +167,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/netmap</para>
+
+    <para>/etc/shorewall6/netmap</para>
   </refsect1>
 
   <refsect1>
@@ -180,14 +180,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-params.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/params</command>
+      <command>/etc/shorewall[6]/params</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -107,7 +107,7 @@
 
     <programlisting>NET_IF=eth0
 NET_BCAST=130.252.100.255
-NET_OPTIONS=routefilter,norfc1918</programlisting>
+NET_OPTIONS=routefilter</programlisting>
 
     <para>Example <ulink
     url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
@@ -119,13 +119,15 @@ net     $NET_IF         $NET_BCAST      $NET_OPTIONS</programlisting>
     <para>This is the same as if the interfaces file had contained:</para>
 
     <programlisting>ZONE    INTERFACE       BROADCAST       OPTIONS
-net     eth0            130.252.100.255 routefilter,norfc1918</programlisting>
+net     eth0            130.252.100.255 routefilter</programlisting>
   </refsect1>
 
   <refsect1>
     <title>FILES</title>
 
     <para>/etc/shorewall/params</para>
+
+    <para>/etc/shorewall6/params</para>
   </refsect1>
 
   <refsect1>
@@ -134,14 +136,6 @@ net     eth0            130.252.100.255 routefilter,norfc1918</programlisting>
     <para><ulink
     url="/configuration_file_basics.htm#Variables">http://www.shorewall.net/configuration_file_basics.htm#Variables</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-policy.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/policy</command>
+      <command>/etc/shorewall[6]/policy</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -33,25 +33,30 @@
       <para>The order of entries in this file is important</para>
 
       <para>This file determines what to do with a new connection request if
-      we don't get a match from the /etc/shorewall/rules file . For each
-      source/destination pair, the file is processed in order until a match is
-      found ("all" will match any source or destination).</para>
+      we don't get a match from the <ulink
+      url="/manpages/shorewall-blrules.html">shorewall-blrules</ulink>(5) or
+      <ulink url="/manpages/shorewall-rules.html">shorewall-rules</ulink>(5)
+      files. For each source/destination pair, the file is processed in order
+      until a match is found ("all" will match any source or
+      destination).</para>
     </important>
 
     <important>
       <para>Intra-zone policies are pre-defined</para>
 
-      <para>For $FW and for all of the zones defined in /etc/shorewall/zones,
-      the POLICY for connections from the zone to itself is ACCEPT (with no
+      <para>For $FW and for all of the zones defined in <ulink
+      url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5), the
+      POLICY for connections from the zone to itself is ACCEPT (with no
       logging or TCP connection rate limiting) but may be overridden by an
       entry in this file. The overriding entry must be explicit (specifying
       the zone name in both SOURCE and DEST) or it must use "all+" (Shorewall
       4.5.17 or later).</para>
 
-      <para>Similarly, if you have IMPLICIT_CONTINUE=Yes in shorewall.conf,
-      then the implicit policy to/from any sub-zone is CONTINUE. These
-      implicit CONTINUE policies may also be overridden by an explicit entry
-      in this file.</para>
+      <para>Similarly, if you have IMPLICIT_CONTINUE=Yes in <ulink
+      url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5), then the
+      implicit policy to/from any sub-zone is CONTINUE. These implicit
+      CONTINUE policies may also be overridden by an explicit entry in this
+      file.</para>
     </important>
 
     <para>The columns in the file are as follows (where the column name is
@@ -274,8 +279,8 @@
           separate log through use of ulogd (<ulink
           url="http://www.netfilter.org/projects/ulogd/index.html">http://www.netfilter.org/projects/ulogd/index.html</ulink>).</para>
 
-          <para>For a description of log levels, see <ulink
-          url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
+          <para>For a description of logging, see <ulink
+          url="/shorewall_logging.html">shorewall-logging(5)</ulink>.</para>
 
           <para>If you don't want to log but need to specify the following
           column, place "-" here.</para>
@@ -396,6 +401,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/policy</para>
+
+    <para>/etc/shorewall6/policy</para>
   </refsect1>
 
   <refsect1>
@@ -404,14 +411,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-providers.xml

@@ -82,14 +82,11 @@
           url="/manpages/shorewall-mangle.html">shorewall-mangle(5)</ulink>
           file to direct packets to this provider.</para>
 
-          <para>If HIGH_ROUTE_MARKS=Yes in <ulink
+          <para>If PROVIDER_OFFSET is non-zero in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>, then
-          the value must be a multiple of 256 between 256 and 65280 or their
-          hexadecimal equivalents (0x0100 and 0xff00 with the low-order byte
-          of the value being zero). Otherwise, the value must be between 1 and
-          255. Each provider must be assigned a unique mark value. This column
-          may be omitted if you don't use packet marking to direct connections
-          to a particular provider.</para>
+          the value must be a multiple of 2^^PROVIDER_OFFSET. In all cases, the
+          number of significant bits may not exceed PROVIDER_OFFSET +
+          PROVIDER_BITS.</para>
         </listitem>
       </varlistentry>
 
@@ -116,9 +113,9 @@
           listed in <ulink
           url="/manpages/shorewall-interfaces.html">shorewall-interfaces(5)</ulink>.
           In general, that interface should not have the
-          <option>proxyarp</option> option specified unless
-          <option>loose</option> is given in the OPTIONS column of this
-          entry.</para>
+          <option>proxyarp</option> or <option>proxyndp</option> option
+          specified unless <option>loose</option> is given in the OPTIONS
+          column of this entry.</para>
 
           <para>Where more than one provider is serviced through a single
           interface, the <emphasis>interface</emphasis> must be followed by a
@@ -217,7 +214,14 @@
                 BALANCE_PROVIDERS=Yes, <option>balance=1</option> is assumed
                 unless the <option>fallback</option>, <option>loose</option>,
                 <option>load</option> or <option>tproxy</option> option is
-                specified.</para>
+                specified.I</para>
+
+                <caution>
+                  <para>In IPV6, the <option>balance</option> option does not
+                  cause balanced default routes to be created; it rather
+                  causes a sequence of default routes with different metrics
+                  to be created.</para>
+                </caution>
               </listitem>
             </varlistentry>
 
@@ -340,6 +344,14 @@
                 <para>Prior to Shorewall 4.4.24, the option is ignored with a
                 warning message if USE_DEFAULT_RT=Yes in
                 <filename>shorewall.conf</filename>.</para>
+
+                <caution>
+                  <para>In IPV6, specifying the <option>fallback</option>
+                  option on multiple providers does not cause balanced
+                  fallback routes to be created; it rather causes a sequence
+                  of fallback routes with different metrics to be
+                  created.</para>
+                </caution>
               </listitem>
             </varlistentry>
 
@@ -426,6 +438,14 @@
                   <command>enable</command> and <command>reenable</command>
                   commands can reenable the provider.</para>
                 </note>
+
+                <important>
+                  <para>RESTORE_DEFAULT_OPTION=Yes in shorewall[6].conf is not
+                  recommended when the <option>persistent</option> option is
+                  used, as restoring default routes to the main routing table
+                  can prevent link status monitors such as foolsm from
+                  correctly detecting non-working providers.</para>
+                </important>
               </listitem>
             </varlistentry>
           </variablelist>
@@ -461,7 +481,7 @@
 
     <variablelist>
       <varlistentry>
-        <term>Example 1:</term>
+        <term>IPv4 Example 1:</term>
 
         <listitem>
           <para>You run squid in your DMZ on IP address 192.168.2.99. Your DMZ
@@ -473,7 +493,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 2:</term>
+        <term>IPv4 Example 2:</term>
 
         <listitem>
           <para>eth0 connects to ISP 1. The IP address of eth0 is
@@ -491,6 +511,36 @@
         ISP2  2       2    main      eth1      130.252.99.254  track,balance      eth2</programlisting>
         </listitem>
       </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 1:</term>
+
+        <listitem>
+          <para>You run squid in your DMZ on IP address 2002:ce7c:92b4:1::2.
+          Your DMZ interface is eth2</para>
+
+          <programlisting>        #NAME   NUMBER  MARK DUPLICATE  INTERFACE GATEWAY              OPTIONS
+        Squid   1       1    -          eth2      2002:ce7c:92b4:1::2  -</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 2:</term>
+
+        <listitem>
+          <para>eth0 connects to ISP 1. The ISP's gateway router has IP
+          address 2001:ce7c:92b4:1::2.</para>
+
+          <para>eth1 connects to ISP 2. The ISP's gateway router has IP
+          address 2001:d64c:83c9:12::8b.</para>
+
+          <para>eth2 connects to a local network.</para>
+
+          <programlisting>        #NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY               OPTIONS    COPY
+        ISP1  1       1    main      eth0     2001:ce7c:92b4:1::2   track      eth2
+        ISP2  2       2    main      eth1     2001:d64c:83c9:12::8b track      eth2</programlisting>
+        </listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 
@@ -498,6 +548,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/providers</para>
+
+    <para>/etc/shorewall6/providers</para>
   </refsect1>
 
   <refsect1>
@@ -509,14 +561,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-proxyarp.xml

@@ -25,6 +25,8 @@
   <refsect1>
     <title>Description</title>
 
+    <para>IPv4 only.</para>
+
     <para>This file is used to define Proxy ARP. There is one entry in this
     file for each IP address to be proxied.</para>
 
@@ -139,14 +141,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-routes.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/routes</command>
+      <command>/etc/shorewall[6]/routes</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -109,6 +109,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/routes</para>
+
+    <para>/etc/shorewall6/routes</para>
   </refsect1>
 
   <refsect1>
@@ -117,14 +119,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-rtrules.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/rtrules</command>
+      <command>/etc/shorewall[6]/rtrules</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -177,7 +177,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 2:</term>
+        <term>IPv4 Example 2:</term>
 
         <listitem>
           <para>You use OpenVPN (routed setup /tunX) in combination with
@@ -199,6 +199,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/rtrules</para>
+
+    <para>/etc/shorewall6/rtrules</para>
   </refsect1>
 
   <refsect1>
@@ -210,14 +212,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-rules.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/rules</command>
+      <command>/etc/shorewall[6]/rules</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -54,7 +54,8 @@
         <listitem>
           <para>This section was added in Shorewall 4.4.23. Rules in this
           section are applied, regardless of the connection tracking state of
-          the packet.</para>
+          the packet and are applied before rules in the other
+          sections.</para>
         </listitem>
       </varlistentry>
 
@@ -66,7 +67,7 @@
           this section.</para>
 
           <para>The only ACTIONs allowed in this section are ACCEPT, DROP,
-          REJECT, LOG, NFQUEUE and QUEUE</para>
+          REJECT, LOG, NFLOG, NFQUEUE and QUEUE</para>
 
           <para>There is an implicit ACCEPT rule inserted at the end of this
           section.</para>
@@ -81,7 +82,7 @@
           section.</para>
 
           <para>The only ACTIONs allowed in this section are ACCEPT, DROP,
-          REJECT, LOG, NFQUEUE and QUEUE</para>
+          REJECT, LOG, NFLOG, NFQUEUE and QUEUE</para>
 
           <para>There is an implicit rule added at the end of this section
           that invokes the RELATED_DISPOSITION (<ulink
@@ -97,7 +98,7 @@
           processed by rules in this section.</para>
 
           <para>The only Actions allowed in this section are ACCEPT, DROP,
-          REJECT, LOG, NFQUEUE and QUEUE.</para>
+          REJECT, LOG, NFLOG, NFQUEUE and QUEUE.</para>
 
           <para>There is an implicit rule added at the end of this section
           that invokes the INVALID_DISPOSITION (<ulink
@@ -113,7 +114,7 @@
           processed by rules in this section.</para>
 
           <para>The only Actions allowed in this section are ACCEPT, DROP,
-          REJECT, LOG, NFQUEUE and QUEUE.</para>
+          REJECT, LOG, NFLOG, NFQUEUE and QUEUE.</para>
 
           <para>There is an implicit rule added at the end of this section
           that invokes the UNTRACKED_DISPOSITION (<ulink
@@ -211,7 +212,8 @@
                 role="bold">DNAT</emphasis>[<emphasis
                 role="bold">-</emphasis>] or <emphasis
                 role="bold">REDIRECT</emphasis>[<emphasis
-                role="bold">-</emphasis>] rules.</para>
+                role="bold">-</emphasis>] rules. Use with IPv6 requires
+                Shorewall 4.5.14 or later.</para>
               </listitem>
             </varlistentry>
 
@@ -232,7 +234,7 @@
                 <para>The name of an <emphasis>action</emphasis> declared in
                 <ulink
                 url="/manpages/shorewall-actions.html">shorewall-actions</ulink>(5)
-                or in /usr/share/shorewall/actions.std.</para>
+                or in /usr/share/shorewall[6]/actions.std.</para>
               </listitem>
             </varlistentry>
 
@@ -286,7 +288,8 @@
               <listitem>
                 <para>Added in Shorewall 4.4.20. Audited versions of ACCEPT,
                 ACCEPT+ and ACCEPT! respectively. Require AUDIT_TARGET support
-                in the kernel and iptables.</para>
+                in the kernel and iptables. A_ACCEPT+ with IPv6 requires
+                Shorewall 4.5.14 or later.</para>
               </listitem>
             </varlistentry>
 
@@ -401,7 +404,8 @@
 
               <listitem>
                 <para>Forward the request to another system (and optionally
-                another port).</para>
+                another port). Use with IPv6 requires Shorewall 4.5.14 or
+                later.</para>
               </listitem>
             </varlistentry>
 
@@ -414,7 +418,8 @@
                 <para>Like <emphasis role="bold">DNAT</emphasis> but only
                 generates the <emphasis role="bold">DNAT</emphasis> iptables
                 rule and not the companion <emphasis
-                role="bold">ACCEPT</emphasis> rule.</para>
+                role="bold">ACCEPT</emphasis> rule. Use with IPv6 requires
+                Shorewall 4.5.14 or later.</para>
               </listitem>
             </varlistentry>
 
@@ -496,11 +501,11 @@
               [<replaceable>option</replaceable> ...])</term>
 
               <listitem>
-                <para>This action allows you to specify an iptables target
-                with options (e.g., 'IPTABLES(MARK --set-xmark 0x01/0xff)'. If
-                the <replaceable>iptables-target</replaceable> is not one
-                recognized by Shorewall, the following error message will be
-                issued:</para>
+                <para>IPv4 only. This action allows you to specify an iptables
+                target with options (e.g., 'IPTABLES(MARK --set-xmark
+                0x01/0xff)'. If the <replaceable>iptables-target</replaceable>
+                is not one recognized by Shorewall, the following error
+                message will be issued:</para>
 
                 <programlisting>    ERROR: Unknown target (<replaceable>iptables-target</replaceable>)</programlisting>
 
@@ -521,6 +526,39 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">IP6TABLES</emphasis>({<replaceable>ip6tables-target</replaceable>
+              [<replaceable>option</replaceable> ...])</term>
+
+              <listitem>
+                <para>IPv6 only. This action allows you to specify an
+                ip6tables target with options (e.g., 'IPTABLES(MARK
+                --set-xmark 0x01/0xff)'. If the
+                <replaceable>ip6tables-target</replaceable> is not one
+                recognized by Shorewall, the following error message will be
+                issued:</para>
+
+                <programlisting>    ERROR: Unknown target (<replaceable>ip6tables-target</replaceable>)</programlisting>
+
+                <para>This error message may be eliminated by adding
+                the<replaceable>
+                ip6tables-</replaceable><replaceable>target</replaceable> as a
+                builtin action in <ulink
+                url="/manpages6/shorewall6-actions.html">shorewall-actions</ulink>(5).</para>
+
+                <important>
+                  <para>If you specify REJECT as the
+                  <replaceable>ip6tables-target</replaceable>, the target of
+                  the rule will be the i6ptables REJECT target and not
+                  Shorewall's builtin 'reject' chain which is used when REJECT
+                  (see below) is specified as the
+                  <replaceable>target</replaceable> in the ACTION
+                  column.</para>
+                </important>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">LOG:<replaceable>level</replaceable></emphasis></term>
@@ -673,7 +711,8 @@
                 <para>Excludes the connection from any subsequent <emphasis
                 role="bold">DNAT</emphasis>[-] or <emphasis
                 role="bold">REDIRECT</emphasis>[-] rules but doesn't generate
-                a rule to accept the traffic.</para>
+                a rule to accept the traffic. Use with IPv6 requires Shorewall
+                4.5.14 or later.</para>
               </listitem>
             </varlistentry>
 
@@ -708,7 +747,7 @@
 
                 <para>Beginning with Shorewall 5.0.8, the type of reject may
                 be specified in the <replaceable>option</replaceable>
-                paramater. Valid <replaceable>option</replaceable> values
+                paramater. Valid IPv4 <replaceable>option</replaceable> values
                 are:</para>
 
                 <simplelist>
@@ -731,6 +770,28 @@
                   option may also be specified as
                   <option>tcp-reset</option>.</member>
                 </simplelist>
+
+                <para>Valid IPv6 <replaceable>option</replaceable> values
+                are:</para>
+
+                <simplelist>
+                  <member><option>icmp6-no-route</option></member>
+
+                  <member><option>no-route</option></member>
+
+                  <member><option>i</option><option>cmp6-adm-prohibited</option></member>
+
+                  <member><option>adm-prohibited</option></member>
+
+                  <member><option>icmp6-addr-unreachable</option></member>
+
+                  <member><option>addr-unreach</option></member>
+
+                  <member><option>icmp6-port-unreachable</option></member>
+
+                  <member><option>tcp-reset</option> (the PROTO column must
+                  specify TCP)</member>
+                </simplelist>
               </listitem>
             </varlistentry>
 
@@ -749,7 +810,8 @@
 
               <listitem>
                 <para>Redirect the request to a server running on the
-                firewall.</para>
+                firewall. Use with IPv6 requires Shorewall 4.5.14 or
+                later.</para>
               </listitem>
             </varlistentry>
 
@@ -762,7 +824,8 @@
                 <para>Like <emphasis role="bold">REDIRECT</emphasis> but only
                 generates the <emphasis role="bold">REDIRECT</emphasis>
                 iptables rule and not the companion <emphasis
-                role="bold">ACCEPT</emphasis> rule.</para>
+                role="bold">ACCEPT</emphasis> rule. Use with IPv6 requires
+                Shorewall 4.5.14 or later.</para>
               </listitem>
             </varlistentry>
 
@@ -842,10 +905,10 @@
               role="bold">ULOG</emphasis>[(<replaceable>ulog-parameters</replaceable>)]</term>
 
               <listitem>
-                <para>Added in Shorewall 4.5.10. Queues matching packets to a
-                back end logging daemon via a netlink socket then continues to
-                the next rule. See <ulink
-                url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
+                <para>IPv4 only. Added in Shorewall 4.5.10. Queues matching
+                packets to a back end logging daemon via a netlink socket then
+                continues to the next rule. See <ulink
+                url="shorewall-logging.html">shorewall-logging(5)</ulink>.</para>
 
                 <para>Similar to<emphasis role="bold">
                 LOG:ULOG</emphasis>[(<replaceable>ulog-parameters</replaceable>)],
@@ -889,11 +952,11 @@
             </listitem>
           </itemizedlist>
 
-          <para>You may also specify <emphasis role="bold">ULOG</emphasis> or
-          <emphasis role="bold">NFLOG</emphasis> (must be in upper case) as a
-          log level.This will log to the ULOG or NFLOG target for routing to a
-          separate log through use of ulogd (<ulink
-          url="http://www.netfilter.org/projects/ulogd/index.html">http://www.netfilter.org/projects/ulogd/index.html</ulink>).</para>
+          <para>You may also specify <emphasis role="bold">ULOG</emphasis>
+          (IPv4 only) or <emphasis role="bold">NFLOG</emphasis> (must be in
+          upper case) as a log level.This will log to the ULOG or NFLOG target
+          for routing to a separate log through use of ulogd (<ulink
+          url="shorewall-logging.html">shorewall-logging(5)</ulink>).</para>
 
           <para>Actions specifying logging may be followed by a log tag (a
           string of alphanumeric characters) which is appended to the string
@@ -922,9 +985,9 @@
 
               <listitem>
                 <para>The name of a zone defined in <ulink
-                url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5). When
-                only the zone name is specified, the packet source may be any
-                host in that zone.</para>
+                url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5).
+                When only the zone name is specified, the packet source may be
+                any host in that zone.</para>
 
                 <para>zone may also be one of the following:</para>
 
@@ -991,9 +1054,10 @@
                 <replaceable>zone</replaceable> in either <ulink
                 url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
                 or <ulink
-                url="/manpages/shorewall.hosts.html">shorewall-hosts</ulink>(5). Only
-                packets from hosts in the <replaceable>zone</replaceable> that
-                arrive through the named interface will match the rule.</para>
+                url="/manpages/shorewall.hosts.html">shorewall-hosts</ulink>(5).
+                Only packets from hosts in the <replaceable>zone</replaceable>
+                that arrive through the named interface will match the
+                rule.</para>
               </listitem>
             </varlistentry>
 
@@ -1208,6 +1272,49 @@
                 of the net zone.</para>
               </listitem>
             </varlistentry>
+
+            <varlistentry>
+              <term>dmz:[2002:ce7c:2b4:1::2]</term>
+
+              <listitem>
+                <para>Host 2002:ce7c:92b4:1::2 in the DMZ</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>net:2001:4d48:ad51:24::/64</term>
+
+              <listitem>
+                <para>Subnet 2001:4d48:ad51:24::/64 on the Internet</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>loc:[2002:cec792b4:1::2],[2002:cec792b4:1::44]</term>
+
+              <listitem>
+                <para>Hosts 2002:cec792b4:1::2 and 2002:cec792b4:1::44 in the
+                local zone.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>loc:~00-A0-C9-15-39-78</term>
+
+              <listitem>
+                <para>Host in the local zone with MAC address
+                00:A0:C9:15:39:78.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term>net:[2001:4d48:ad51:24::]/64![2001:4d48:ad51:24:6::]/80</term>
+
+              <listitem>
+                <para>Subnet 2001:4d48:ad51:24::/64 on the Internet except for
+                2001:4d48:ad51:24:6::/80.</para>
+              </listitem>
+            </varlistentry>
           </variablelist>
         </listitem>
       </varlistentry>
@@ -1229,9 +1336,9 @@
 
               <listitem>
                 <para>The name of a zone defined in <ulink
-                url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5). When
-                only the zone name is specified, the packet destination may be
-                any host in that zone.</para>
+                url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5).
+                When only the zone name is specified, the packet destination
+                may be any host in that zone.</para>
 
                 <para>zone may also be one of the following:</para>
 
@@ -1298,9 +1405,9 @@
                 <replaceable>zone</replaceable> in either <ulink
                 url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
                 or <ulink
-                url="/manpages/shorewall-hosts.html">shorewall-hosts</ulink>(5). Only
-                packets to hosts in the <replaceable>zone</replaceable> that
-                are sent through the named interface will match the
+                url="/manpages/shorewall-hosts.html">shorewall-hosts</ulink>(5).
+                Only packets to hosts in the <replaceable>zone</replaceable>
+                that are sent through the named interface will match the
                 rule.</para>
               </listitem>
             </varlistentry>
@@ -2082,12 +2189,100 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">HEADERS</emphasis></term>
+        <term><emphasis role="bold">HEADERS -
+        [!][any:|exactly:]</emphasis><replaceable>header-list
+        </replaceable>(Optional - Added in Shorewall 4.4.15)</term>
 
         <listitem>
-          <para>Added in Shorewall 4.4.15. Not used in IPv4 configurations. If
-          you with to supply a value for one of the later columns, enter '-'
-          in this column.</para>
+          <para>This column is only used in IPv6. In IPv4, supply "-" in this
+          column if you with to place a value in one of the following
+          columns.</para>
+
+          <para>The <replaceable>header-list</replaceable> consists of a
+          comma-separated list of headers from the following list.</para>
+
+          <variablelist>
+            <varlistentry>
+              <term><emphasis role="bold">auth</emphasis>, <emphasis
+              role="bold">ah</emphasis>, or <emphasis
+              role="bold">51</emphasis></term>
+
+              <listitem>
+                <para><firstterm>Authentication Headers</firstterm> extension
+                header.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis role="bold">esp</emphasis>, or <emphasis
+              role="bold">50</emphasis></term>
+
+              <listitem>
+                <para><firstterm>Encrypted Security Payload</firstterm>
+                extension header.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis role="bold">hop</emphasis>, <emphasis
+              role="bold">hop-by-hop</emphasis> or <emphasis
+              role="bold">0</emphasis></term>
+
+              <listitem>
+                <para>Hop-by-hop options extension header.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis role="bold">route</emphasis>, <emphasis
+              role="bold">ipv6-route</emphasis> or <emphasis
+              role="bold">43</emphasis></term>
+
+              <listitem>
+                <para>IPv6 Route extension header.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis role="bold">frag</emphasis>, <emphasis
+              role="bold">ipv6-frag</emphasis> or <emphasis
+              role="bold">44</emphasis></term>
+
+              <listitem>
+                <para>IPv6 fragmentation extension header.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis role="bold">none</emphasis>, <emphasis
+              role="bold">ipv6-nonxt</emphasis> or <emphasis
+              role="bold">59</emphasis></term>
+
+              <listitem>
+                <para>No next header</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis role="bold">proto</emphasis>, <emphasis
+              role="bold">protocol</emphasis> or <emphasis
+              role="bold">255</emphasis></term>
+
+              <listitem>
+                <para>Any protocol header.</para>
+              </listitem>
+            </varlistentry>
+          </variablelist>
+
+          <para>If <emphasis role="bold">any:</emphasis> is specified, the
+          rule will match if any of the listed headers are present. If
+          <emphasis role="bold">exactly:</emphasis> is specified, the will
+          match packets that exactly include all specified headers. If neither
+          is given, <emphasis role="bold">any:</emphasis> is assumed.</para>
+
+          <para>If <emphasis role="bold">!</emphasis> is entered, the rule
+          will match those packets which would not be matched when <emphasis
+          role="bold">!</emphasis> is omitted.</para>
         </listitem>
       </varlistentry>
 
@@ -2413,6 +2608,20 @@
         SECCTX             builtin</programlisting>
         </listitem>
       </varlistentry>
+
+      <varlistentry>
+        <term>Example 15:</term>
+
+        <listitem>
+          <para>You want to accept SSH connections to your firewall only from
+          internet IP addresses 2002:ce7c::92b4:1::2 and
+          2002:ce7c::92b4:1::22</para>
+
+          <programlisting>        #ACTION  SOURCE DEST            PROTO   DPORT   SPORT   ORIGDEST
+        ACCEPT   net:&lt;2002:ce7c::92b4:1::2,2002:ce7c::92b4:1::22&gt; \
+                        $FW              tcp     22</programlisting>
+        </listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 
@@ -2420,28 +2629,22 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/rules</para>
+
+    <para>/etc/shorewall6/rules</para>
   </refsect1>
 
   <refsect1>
     <title>See ALSO</title>
 
+    <para><ulink
+    url="shorewall-logging.html">shorewall-logging(5)</ulink></para>
+
     <para><ulink
     url="/ipsets.html">http://www.shorewall.net/ipsets.html</ulink></para>
 
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para><ulink
-    url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink></para>
-
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-blrules(5), shorewall-hosts(5),
-    shorewall_interfaces(5), shorewall-ipsets(5), shorewall-maclist(5),
-    shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5),
-    shorewall-params(5), shorewall-policy(5), shorewall-providers(5),
-    shorewall-proxyarp(5), shorewall-rtrules(5), shorewall-routestopped(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-secmarks.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/secmarks</command>
+      <command>/etc/shorewall[6]/secmarks</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -229,7 +229,7 @@
         role="bold">all}[,...]</emphasis></term>
 
         <listitem>
-          <para> See <ulink
+          <para>See <ulink
           url="shorewall-rules.html">shorewall-rules(5)</ulink> for
           details.</para>
 
@@ -404,6 +404,8 @@ RESTORE                               I:ER</programlisting>
     <title>FILES</title>
 
     <para>/etc/shorewall/secmarks</para>
+
+    <para>/etc/shorewall6/secmarks</para>
   </refsect1>
 
   <refsect1>
@@ -415,14 +417,6 @@ RESTORE                               I:ER</programlisting>
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-snat.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/snat</command>
+      <command>/etc/shorewall[6]/snat</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -52,12 +52,52 @@
         <term><emphasis role="bold">ACTION</emphasis></term>
 
         <listitem>
-          <para>Defines the type of rule to generate. Choices are:</para>
+          <para>Defines the type of rule to generate. Beginning with Shorewall
+          5.1.9, with the exception of NFLOG and ULOG, the action may be
+          followed by a colon (":") and a <replaceable>log level</replaceable>
+          (see <ulink
+          url="shorewall-logging.html">shorewall-logging(5)</ulink>).</para>
+
+          <para>Choices for ACTION are:</para>
 
           <variablelist>
             <varlistentry>
               <term><emphasis
-              role="bold">MASQUERADE[+]</emphasis>[([<replaceable>lowport</replaceable>-<replaceable>highport</replaceable>][<option>random</option>])]</term>
+              role="bold"><replaceable>action</replaceable></emphasis>[+][(<replaceable>parameter</replaceable>,...)][:<replaceable>level</replaceable>]</term>
+
+              <listitem>
+                <para>where <replaceable>action</replaceable> is an action
+                declared in <ulink
+                url="/manpages/shorewall-actions.html">shorewall-actions(5)</ulink>
+                with the <option>nat</option> option. See <ulink
+                url="/Actions.html">www.shorewall.net/Actions.html</ulink> for
+                further information.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis
+              role="bold">CONTINUE</emphasis>[+]:<replaceable>level</replaceable></term>
+
+              <listitem>
+                <para>Causes matching packets to be exempted from any
+                following rules in the file.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis
+              role="bold">LOG:<replaceable>level</replaceable></emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.1.9. Simply log the packet and
+                continue with the next rule.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis
+              role="bold">MASQUERADE[+]</emphasis>[([<replaceable>lowport</replaceable>-<replaceable>highport</replaceable>][<option>random</option>])][:<replaceable>level</replaceable>]</term>
 
               <listitem>
                 <para>Causes matching outgoing packages to have their source
@@ -73,12 +113,52 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)]</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.1.9. Queues matching packets to a
+                back end logging daemon via a netlink socket then continues to
+                the next rule. See <ulink
+                url="shorewall-logging.html">shorewall-logging(5)</ulink>.</para>
+
+                <para>The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1.</para>
+                  </listitem>
+                </itemizedlist>
+
+                <para>NFLOG is similar to<emphasis role="bold">
+                LOG:NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)],
+                except that the log level is not changed when this ACTION is
+                used in an action or macro body and the invocation of that
+                action or macro specifies a log level.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">SNAT[+]</emphasis>([<emphasis>address-or-address-range</emphasis>][:<emphasis>lowport</emphasis><emphasis
               role="bold">-</emphasis><emphasis>highport</emphasis>][<emphasis
               role="bold">:random</emphasis>][:<option>persistent</option>]|<emphasis
-              role="bold">detect</emphasis>|</term>
+              role="bold">detect</emphasis>)[:<replaceable>level</replaceable>]</term>
 
               <listitem>
                 <para>If you specify an address here, matching packets will
@@ -86,7 +166,7 @@
                 ADD_SNAT_ALIASES is set to Yes or yes in <ulink
                 url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
                 then Shorewall will automatically add this address to the
-                INTERFACE named in the first column.</para>
+                INTERFACE named in the first column (IPv4 only).</para>
 
                 <para>You may also specify a range of up to 256 IP addresses
                 if you want the SNAT address to be assigned from that range in
@@ -105,9 +185,7 @@
                 role="bold">:random</emphasis>) with <emphasis
                 role="bold">:persistent</emphasis>. This is only useful when
                 an address range is specified and causes a client to be given
-                the same source/destination IP pair. This feature replaces the
-                SAME modifier which was removed from Shorewall in version
-                4.4.0.</para>
+                the same source/destination IP pair.</para>
 
                 <para>You may also use the special value
                 <option>detect</option> which causes Shorewall to determine
@@ -134,26 +212,21 @@
               </listitem>
             </varlistentry>
 
-            <varlistentry>
-              <term><emphasis role="bold">CONTINUE</emphasis>[+]</term>
-
-              <listitem>
-                <para>Causes matching packets to be exempted from any
-                following rules in the file.</para>
-              </listitem>
-            </varlistentry>
-
             <varlistentry>
               <term><emphasis
-              role="bold"><replaceable>action</replaceable></emphasis>[+][(<replaceable>parameter</replaceable>,...)]</term>
+              role="bold">ULOG</emphasis>[(<replaceable>ulog-parameters</replaceable>)]</term>
 
               <listitem>
-                <para>where <replaceable>action</replaceable> is an action
-                declared in <ulink
-                url="/manpages/shorewall-actions.html">shorewall-actions(5)</ulink> with
-                the <option>nat</option> option. See <ulink
-                url="/Actions.html">www.shorewall.net/Actions.html</ulink> for
-                further information.</para>
+                <para>IPv4 only. Added in Shorewall 5.1.9. Queues matching
+                packets to a back end logging daemon via a netlink socket then
+                continues to the next rule. See <ulink
+                url="shorewall-logging.html">shorewall-logging(5)</ulink>.</para>
+
+                <para>Similar to<emphasis role="bold">
+                LOG:ULOG</emphasis>[(<replaceable>ulog-parameters</replaceable>)],
+                except that the log level is not changed when this ACTION is
+                used in an action or macro body and the invocation of that
+                action or macro specifies a log level.</para>
               </listitem>
             </varlistentry>
           </variablelist>
@@ -257,7 +330,8 @@
         <listitem>
           <para>If you wish to restrict this entry to a particular protocol
           then enter the protocol name (from protocols(5)) or number here. See
-          <ulink url="/manpages/shorewall-rules.html">shorewall-rules(5)</ulink> for
+          <ulink
+          url="/manpages/shorewall-rules.html">shorewall-rules(5)</ulink> for
           details.</para>
 
           <para>Beginning with Shorewall 4.5.12, this column can accept a
@@ -599,7 +673,7 @@
 
     <variablelist>
       <varlistentry>
-        <term>Example 1:</term>
+        <term>IPv4 Example 1:</term>
 
         <listitem>
           <para>You have a simple masquerading setup where eth0 connects to a
@@ -614,7 +688,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 2:</term>
+        <term>IPv4 Example 2:</term>
 
         <listitem>
           <para>You add a router to your local network to connect subnet
@@ -628,7 +702,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 3:</term>
+        <term>IPv4 Example 3:</term>
 
         <listitem>
           <para>You want all outgoing traffic from 192.168.1.0/24 through eth0
@@ -642,7 +716,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 4:</term>
+        <term>IPv4 Example 4:</term>
 
         <listitem>
           <para>You want all outgoing SMTP traffic entering the firewall from
@@ -666,7 +740,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 5:</term>
+        <term>IPv4 Example 5:</term>
 
         <listitem>
           <para>Connections leaving on eth0 and destined to any host defined
@@ -674,12 +748,12 @@
           address changed to 206.124.146.177.</para>
 
           <programlisting>        #ACTION                 SOURCE          DEST
-        SNAT(206.124.146.177)   -               eth0+myset[dst]</programlisting>
+        SNAT(206.124.146.177)   -               eth0:+myset[dst]</programlisting>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term>Example 6:</term>
+        <term>IPv4 Example 6:</term>
 
         <listitem>
           <para>SNAT outgoing connections on eth0 from 192.168.1.0/24 in
@@ -701,19 +775,34 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 7:</term>
+        <term>IPv6 Example 1:</term>
 
         <listitem>
-          <para>Your eth1 has two public IP addresses: 70.90.191.121 and
-          70.90.191.123. You want to use the iptables statistics match to
-          masquerade outgoing connections evenly between these two
-          addresses.</para>
+          <para>You have a simple 'masquerading' setup where eth0 connects to
+          a DSL or cable modem and eth1 connects to your local network with
+          subnet 2001:470:b:787::0/64</para>
+
+          <para>Your entry in the file will be:</para>
+
+          <programlisting>        #ACTION      SOURCE                  DEST
+        MASQUERADE   2001:470:b:787::0/64    eth0</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 2:</term>
+
+        <listitem>
+          <para>Your sit1 interface has two public IP addresses:
+          2001:470:a:227::1 and 2001:470:b:227::1. You want to use the
+          iptables statistics match to masquerade outgoing connections evenly
+          between these two addresses.</para>
 
           <programlisting>/etc/shorewall/snat:
 
-       #ACTION                 SOURCE           DEST
-       SNAT(70.90.191.121)     -                eth1 { probability=.50 }
-       SNAT(70.90.191.123)     -                eth1</programlisting>
+       #ACTION                      SOURCE     DEST
+       SNAT(2001:470:a:227::1)      ::/0       sit1              { probability=0.50 }
+       SNAT(2001:470:a:227::2)      ::/0       sit</programlisting>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -723,6 +812,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/snat</para>
+
+    <para>/etc/shorewall6/snat</para>
   </refsect1>
 
   <refsect1>
@@ -731,14 +822,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-exclusion(5), shorewall-hosts(5),
-    shorewall_interfaces(5), shorewall-ipsets(5), shorewall-maclist(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-stoppedrules.xml

@@ -19,7 +19,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/stoppedrules</command>
+      <command>/etc/shorewall[6]/stoppedrules</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -153,6 +153,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/stoppedrules</para>
+
+    <para>/etc/shorewall6/stoppedrules</para>
   </refsect1>
 
   <refsect1>
@@ -164,14 +166,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-tcclasses.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/tcclasses</command>
+      <command>/etc/shorewall[6]/tcclasses</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -763,6 +763,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/tcclasses</para>
+
+    <para>/etc/shorewall6/tcclasses</para>
   </refsect1>
 
   <refsect1>
@@ -778,14 +780,6 @@
 
     <para>tc-red(8)</para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-tcdevices.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/tcdevices</command>
+      <command>/etc/shorewall[6]/tcdevices</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -160,7 +160,9 @@
           how often the rate is estimated and how many samples are retained
           for estimating. Please see <ulink
           url="http://ace-host.stuart.id.au/russell/files/tc/doc/estimators.txt">http://ace-host.stuart.id.au/russell/files/tc/doc/estimators.txt</ulink>
-          for details.</para>
+          for details. If not specified, the default
+          <replaceable>interval</replaceable> is 250ms and the default
+          <replaceable>decay_interval</replaceable> is 4sec.</para>
         </listitem>
       </varlistentry>
 
@@ -276,6 +278,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/tcdevices</para>
+
+    <para>/etc/shorewall6/tcdevices</para>
   </refsect1>
 
   <refsect1>
@@ -292,14 +296,6 @@
     <para><ulink
     url="http://ace-host.stuart.id.au/russell/files/tc/doc/estimators.txt">http://ace-host.stuart.id.au/russell/files/tc/doc/estimators.txt</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-tcfilters.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/tcfilters</command>
+      <command>/etc/shorewall[6]/tcfilters</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -89,12 +89,12 @@
           Beginning with Shorewall 4.6.0, an ipset name (prefixed with '+')
           may be used if your kernel and ip6tables have the <firstterm>Basic
           Ematch</firstterm> capability and you set BASIC_FILTERS=Yes in
-          <ulink url="/manpages/shorewall.conf.html">shorewall.conf (5)</ulink>. The
-          ipset name may optionally be followed by a number or a comma
-          separated list of src and/or dst enclosed in square brackets
-          ([...]). See <ulink
-          url="/manpages/shorewall-ipsets.html">shorewall-ipsets(5)</ulink> for
-          details.</para>
+          <ulink url="/manpages/shorewall.conf.html">shorewall.conf
+          (5)</ulink>. The ipset name may optionally be followed by a number
+          or a comma separated list of src and/or dst enclosed in square
+          brackets ([...]). See <ulink
+          url="/manpages/shorewall-ipsets.html">shorewall-ipsets(5)</ulink>
+          for details.</para>
         </listitem>
       </varlistentry>
 
@@ -108,12 +108,12 @@
           Beginning with Shorewall 4.6.0, an ipset name (prefixed with '+')
           may be used if your kernel and ip6tables have the <firstterm>Basic
           Ematch</firstterm> capability and you set BASIC_FILTERS=Yes in
-          <ulink url="/manpages/shorewall.conf.html">shorewall.conf (5)</ulink>. The
-          ipset name may optionally be followed by a number or a comma
-          separated list of src and/or dst enclosed in square brackets
-          ([...]). See <ulink
-          url="/manpages/shorewall-ipsets.html">shorewall-ipsets(5)</ulink> for
-          details.</para>
+          <ulink url="/manpages/shorewall.conf.html">shorewall.conf
+          (5)</ulink>. The ipset name may optionally be followed by a number
+          or a comma separated list of src and/or dst enclosed in square
+          brackets ([...]). See <ulink
+          url="/manpages/shorewall-ipsets.html">shorewall-ipsets(5)</ulink>
+          for details.</para>
 
           <para>You may exclude certain hosts from the set already defined
           through use of an <emphasis>exclusion</emphasis> (see <ulink
@@ -288,7 +288,7 @@
 
     <variablelist>
       <varlistentry>
-        <term>Example 1:</term>
+        <term>IPv4 Example 1:</term>
 
         <listitem>
           <para>Place all 'ping' traffic on interface 1 in class 10. Note that
@@ -310,7 +310,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 2:</term>
+        <term>IPv4 Example 2:</term>
 
         <listitem>
           <para>Add two filters with priority 10 (Shorewall 4.5.8 or
@@ -324,6 +324,22 @@
        1:10      0.0.0.0/0 0.0.0.0/0    icmp    echo-reply      10</programlisting>
         </listitem>
       </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 1:</term>
+
+        <listitem>
+          <para>Add two filters with priority 10 (Shorewall 4.5.8 or
+          later).</para>
+
+          <programlisting>       #CLASS    SOURCE    DEST         PROTO   DPORT           PRIORITY
+
+       IPV6
+
+       1:10      ::/0      ::/0         icmp    echo-request    10
+       1:10      ::/0      ::/0         icmp    echo-reply      10</programlisting>
+        </listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 
@@ -331,6 +347,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/tcfilters</para>
+
+    <para>/etc/shorewall6/tcfilters</para>
   </refsect1>
 
   <refsect1>
@@ -348,14 +366,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-ecn(5), shorewall-exclusion(5),
-    shorewall-hosts(5), shorewall_interfaces(5), shorewall-ipsets(5),
-    shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5),
-    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
-    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
-    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-tcinterfaces.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/tcinterfaces</command>
+      <command>/etc/shorewall[6]/tcinterfaces</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -172,7 +172,9 @@
           how often the rate is estimated and how many samples are retained
           for estimating. Please see <ulink
           url="http://ace-host.stuart.id.au/russell/files/tc/doc/estimators.txt">http://ace-host.stuart.id.au/russell/files/tc/doc/estimators.txt</ulink>
-          for details.</para>
+          for details. If not specified, the default
+          <replaceable>interval</replaceable> is 250ms and the default
+          <replaceable>decay_interval</replaceable> is 4sec.</para>
         </listitem>
       </varlistentry>
 
@@ -201,7 +203,9 @@
   <refsect1>
     <title>FILES</title>
 
-    <para>/etc/shorewall/tcinterfaces.</para>
+    <para>/etc/shorewall/tcinterfaces</para>
+
+    <para>/etc/shorewall6/tcinterfaces</para>
   </refsect1>
 
   <refsect1>
@@ -213,14 +217,6 @@
     <para><ulink
     url="http://ace-host.stuart.id.au/russell/files/tc/doc/estimators.txt">http://ace-host.stuart.id.au/russell/files/tc/doc/estimators.txt</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcpri(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-tcpri.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/tcpri</command>
+      <command>/etc/shorewall[6]/tcpri</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -148,6 +148,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/tcpri</para>
+
+    <para>/etc/shorewall6/tcpri</para>
   </refsect1>
 
   <refsect1>
@@ -156,14 +158,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>prio(8), shorewall(8), shorewall-accounting(5),
-    shorewall-actions(5), shorewall-blacklist(5), shorewall-hosts(5),
-    shorewall_interfaces(5), shorewall-ipsets(5), shorewall-maclist(5),
-    shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5),
-    shorewall-params(5), shorewall-policy(5), shorewall-providers(5),
-    shorewall-proxyarp(5), shorewall-rtrules(5), shorewall-routestopped(5),
-    shorewall-rules(5), shorewall.conf(5), shorewall-secmarks(5),
-    shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-mangle(5),
-    shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>prio(8), shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-tunnels.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/tunnels</command>
+      <command>/etc/shorewall[6]/tunnels</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -173,7 +173,7 @@
 
     <variablelist>
       <varlistentry>
-        <term>Example 1:</term>
+        <term>IPv4 Example 1:</term>
 
         <listitem>
           <para>IPSec tunnel.</para>
@@ -187,7 +187,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 2:</term>
+        <term>IPv4 Example 2:</term>
 
         <listitem>
           <para>Road Warrior (LapTop that may connect from anywhere) where the
@@ -199,7 +199,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 3:</term>
+        <term>IPv4 Example 3:</term>
 
         <listitem>
           <para>Host 4.33.99.124 is a standalone system connected via an ipsec
@@ -211,7 +211,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 4:</term>
+        <term>IPv4 Example 4:</term>
 
         <listitem>
           <para>Road Warriors that may belong to zones vpn1, vpn2 or vpn3. The
@@ -225,7 +225,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 5:</term>
+        <term>IPv4 Example 5:</term>
 
         <listitem>
           <para>You run the Linux PPTP client on your firewall and connect to
@@ -237,7 +237,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 6:</term>
+        <term>IPv4 Example 6:</term>
 
         <listitem>
           <para>You run a PPTP server on your firewall.</para>
@@ -260,7 +260,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 8:</term>
+        <term>IPv4 Example 8:</term>
 
         <listitem>
           <para>You have a tunnel that is not one of the supported types. Your
@@ -273,7 +273,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>Example 9:</term>
+        <term>IPv4 Example 9:</term>
 
         <listitem>
           <para>TINC tunnel where the remote gateways are not specified. If
@@ -284,6 +284,83 @@
         tinc             net     0.0.0.0/0</programlisting>
         </listitem>
       </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 1:</term>
+
+        <listitem>
+          <para>IPSec tunnel.</para>
+
+          <para>The remote gateway is 2001:cec792b4:1::44. The tunnel does not
+          use the AH protocol</para>
+
+          <programlisting>        #TYPE           ZONE    GATEWAY
+        ipsec:noah      net     2002:cec792b4:1::44</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 2:</term>
+
+        <listitem>
+          <para>Road Warrior (LapTop that may connect from anywhere) where the
+          "gw" zone is used to represent the remote LapTop</para>
+
+          <programlisting>        #TYPE           ZONE    GATEWAY                 GATEWAY ZONES
+        ipsec           net     ::/0                    gw</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 3:</term>
+
+        <listitem>
+          <para>Host 2001:cec792b4:1::44 is a standalone system connected via
+          an ipsec tunnel to the firewall system. The host is in zone
+          gw.</para>
+
+          <programlisting>        #TYPE           ZONE    GATEWAY                 GATEWAY ZONES
+        ipsec           net     2001:cec792b4:1::44     gw</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 4:</term>
+
+        <listitem>
+          <para>OPENVPN tunnel. The remote gateway is 2001:cec792b4:1::44 and
+          openvpn uses port 7777.</para>
+
+          <programlisting>        #TYPE           ZONE    GATEWAY                 GATEWAY ZONES
+        openvpn:7777    net     2001:cec792b4:1::44</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 8:</term>
+
+        <listitem>
+          <para>You have a tunnel that is not one of the supported types. Your
+          tunnel uses UDP port 4444. The other end of the tunnel is
+          2001:cec792b4:1::44.</para>
+
+          <programlisting>        #TYPE            ZONE    GATEWAY                GATEWAY ZONES
+        generic:udp:4444 net     2001:cec792b4:1::44</programlisting>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>IPv6 Example 9:</term>
+
+        <listitem>
+          <para>TINC tunnel where the remote gateways are not specified. If
+          you wish to specify a list of gateways, you can do so in the GATEWAY
+          column.</para>
+
+          <programlisting>        #TYPE            ZONE    GATEWAY          GATEWAY ZONES
+        tinc             net     ::/0</programlisting>
+        </listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 
@@ -291,6 +368,8 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/tunnels</para>
+
+    <para>/etc/shorewall6/tunnels</para>
   </refsect1>
 
   <refsect1>
@@ -299,14 +378,6 @@
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-vardir.xml

@@ -18,7 +18,7 @@
 
   <refsynopsisdiv>
     <cmdsynopsis>
-      <command>/etc/shorewall/vardir</command>
+      <command>/etc/shorewall[6]/vardir</command>
     </cmdsynopsis>
   </refsynopsisdiv>
 
@@ -28,7 +28,8 @@
     <para>This file does not exist by default. You may create the file if you
     want to change the directory used by Shorewall to store state information,
     including compiled firewall scripts. By default, the directory used is
-    <filename>/var/lib/shorewall/</filename>.</para>
+    <filename>/var/lib/shorewall/</filename> for IPv4 and /var/lib/shorewall6/
+    for IPv6</para>
 
     <para>The file contains a single variable assignment:</para>
 
@@ -50,19 +51,13 @@
     <title>FILES</title>
 
     <para>/etc/shorewall/vardir</para>
+
+    <para>/etc/shorewall6/vardir</para>
   </refsect1>
 
   <refsect1>
     <title>See ALSO</title>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
-    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall-zones.xml

@@ -107,7 +107,7 @@
                 <simplelist>
                   <member>2 + 6 + 2*M + 1 = 29</member>
 
-                  <member>2M = 29 - 2 + 6 + 1 = 20</member>
+                  <member>2M = 29 - 2 - 6 - 1 = 20</member>
 
                   <member>M = 10</member>
                 </simplelist>
@@ -128,9 +128,9 @@
           <para>Example:</para>
 
           <programlisting>#ZONE     TYPE     OPTIONS         IN OPTIONS        OUT OPTIONS
-a         ipv4
-b         ipv4
-c:a,b     ipv4</programlisting>
+a         ip
+b         ip
+c:a,b     ip</programlisting>
 
           <para>Currently, Shorewall uses this information to reorder the zone
           list so that parent zones appear after their subzones in the list.
@@ -140,8 +140,8 @@ c:a,b     ipv4</programlisting>
 
           <para>Where an <emphasis role="bold">ipsec</emphasis> zone is
           explicitly included as a child of an <emphasis
-          role="bold">ipv4</emphasis> zone, the ruleset allows CONTINUE
-          policies (explicit or implicit) to work as expected.</para>
+          role="bold">ip</emphasis> zone, the ruleset allows CONTINUE policies
+          (explicit or implicit) to work as expected.</para>
 
           <para>In the future, Shorewall may make additional use of nesting
           information.</para>
@@ -154,7 +154,7 @@ c:a,b     ipv4</programlisting>
         <listitem>
           <variablelist>
             <varlistentry>
-              <term><emphasis role="bold">ipv4</emphasis></term>
+              <term><emphasis role="bold">ip</emphasis></term>
 
               <listitem>
                 <para>This is the standard Shorewall zone type and is the
@@ -162,17 +162,22 @@ c:a,b     ipv4</programlisting>
                 the column. Communication with some zone hosts may be
                 encrypted. Encrypted hosts are designated using the 'ipsec'
                 option in <ulink
-                url="/manpages/shorewall-hosts.html">shorewall-hosts</ulink>(5).</para>
+                url="/manpages/shorewall-hosts.html">shorewall-hosts</ulink>(5).
+                For clarity, this zone type may be specified as
+                <option>ipv4</option> in IPv4 configurations and
+                <option>ipv6</option> in IPv6 configurations.</para>
               </listitem>
             </varlistentry>
 
             <varlistentry>
-              <term><emphasis role="bold">ipsec</emphasis> (or <emphasis
-              role="bold">ipsec4</emphasis>)</term>
+              <term><emphasis role="bold">ipsec</emphasis></term>
 
               <listitem>
                 <para>Communication with all zone hosts is encrypted. Your
-                kernel and iptables must include policy match support.</para>
+                kernel and iptables must include policy match support. For
+                clarity, this zone type may be specified as
+                <option>ipsec4</option> in IPv4 configurations and
+                <option>ipsec6</option> in IPv6 configurations.</para>
               </listitem>
             </varlistentry>
 
@@ -190,12 +195,13 @@ c:a,b     ipv4</programlisting>
             </varlistentry>
 
             <varlistentry>
-              <term><emphasis role="bold">bport</emphasis> (or <emphasis
-              role="bold">bport4</emphasis>)</term>
+              <term><emphasis role="bold">bport</emphasis></term>
 
               <listitem>
                 <para>The zone is associated with one or more ports on a
-                single bridge.</para>
+                single bridge. For clarity, this zone type may be specified as
+                <option>bport4</option> in IPv4 configurations and
+                <option>bport6</option> in IPv6 configurations.</para>
               </listitem>
             </varlistentry>
 
@@ -424,6 +430,8 @@ c:a,b     ipv4</programlisting>
     <title>FILES</title>
 
     <para>/etc/shorewall/zones</para>
+
+    <para>/etc/shorewall6/zones</para>
   </refsect1>
 
   <refsect1>
@@ -435,13 +443,6 @@ c:a,b     ipv4</programlisting>
     <para><ulink
     url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-hosts(5), shorewall_interfaces(5), shorewall-ipsets(5),
-    shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5),
-    shorewall-nesting(8), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall/manpages/shorewall.conf.xml

@@ -20,15 +20,24 @@
     <cmdsynopsis>
       <command>/etc/shorewall/shorewall.conf</command>
     </cmdsynopsis>
+
+    <cmdsynopsis>
+      <command>/etc/shorewall6/shorewall6.conf</command>
+    </cmdsynopsis>
   </refsynopsisdiv>
 
   <refsect1>
     <title>Description</title>
 
-    <para>This file sets options that apply to Shorewall as a whole.</para>
+    <para>The IPv4 and IPv6 environments each have their own configuration.
+    The IPv4 configuration resides in /etc/shorewall/ while the IPv6
+    configuration resides in /etc/shorewall6/.</para>
 
-    <para>The file consists of Shell comments (lines beginning with '#'),
-    blank lines and assignment statements
+    <para>The .conf files set options that apply to Shorewall and Shorewall6
+    as a whole.</para>
+
+    <para>The .conf files consist of Shell comments (lines beginning with
+    '#'), blank lines and assignment statements
     (<emphasis>variable</emphasis>=<emphasis>value</emphasis>). If the
     <emphasis>value</emphasis> contains shell meta characters or white-space,
     then it must be enclosed in quotes. Example:
@@ -65,16 +74,13 @@
     level to choose, 6 (info) is a safe bet. You may specify levels by name or
     by number.</para>
 
-    <para>If you have built your kernel with ULOG and/or NFLOG target support,
-    you may also specify a log level of ULOG and/or NFLOG (must be all caps).
-    Rather than log its messages to syslogd, Shorewall will direct netfilter
-    to log the messages via the ULOG or NFLOG target which will send them to a
-    process called 'ulogd'. ulogd is available with most Linux distributions
-    (although it probably isn't installed by default). Ulogd is also available
-    from <ulink
-    url="http://www.netfilter.org/projects/ulogd/index.html">http://www.netfilter.org/projects/ulogd/index.html</ulink>
-    and can be configured to log all Shorewall messages to their own log
-    file.</para>
+    <para>If you have built your kernel with ULOG (IPv4 only) and/or NFLOG
+    target support, you may also specify a log level of ULOG and/or NFLOG
+    (must be all caps). Rather than log its messages to syslogd, Shorewall
+    will direct netfilter to log the messages via the ULOG or NFLOG target
+    which will send them to a process called 'ulogd'. ulogd is available with
+    most Linux distributions (although it probably isn't installed by
+    default).</para>
 
     <note>
       <para>If you want to specify parameters to ULOG or NFLOG (e.g.,
@@ -82,7 +88,7 @@
 
       <para>Example:</para>
 
-      <programlisting>MACLIST_LOG_LEVEL="NFLOG(1,0,1)"</programlisting>
+      <programlisting>LOG_LEVEL="NFLOG(1,0,1)"</programlisting>
     </note>
 
     <para>Beginning with Shorewall 5.0.0, the log level may be followed by a
@@ -265,8 +271,9 @@
         <listitem>
           <para>This parameter determines whether Shorewall automatically adds
           the external address(es) in <ulink
-          url="/manpages/shorewall-nat.html">shorewall-nat</ulink>(5). If the
-          variable is set to <emphasis role="bold">Yes</emphasis> or <emphasis
+          url="/manpages/shorewall-nat.html">shorewall-nat</ulink>(5), and is
+          only available in IPv4 configurations. If the variable is set to
+          <emphasis role="bold">Yes</emphasis> or <emphasis
           role="bold">yes</emphasis> then Shorewall automatically adds these
           aliases. If it is set to <emphasis role="bold">No</emphasis> or
           <emphasis role="bold">no</emphasis>, you must add these aliases
@@ -293,13 +300,14 @@
         <listitem>
           <para>This parameter determines whether Shorewall automatically adds
           the SNAT ADDRESS in <ulink
-          url="/manpages/shorewall-masq.html">shorewall-masq</ulink>(5). If
-          the variable is set to <emphasis role="bold">Yes</emphasis> or
-          <emphasis role="bold">yes</emphasis> then Shorewall automatically
-          adds these addresses. If it is set to <emphasis
-          role="bold">No</emphasis> or <emphasis role="bold">no</emphasis>,
-          you must add these addresses yourself using your distribution's
-          network configuration tools.</para>
+          url="/manpages/shorewall-masq.html">shorewall-masq</ulink>(5), and
+          is only available in IPv4 configurations. If the variable is set to
+          <emphasis role="bold">Yes</emphasis> or <emphasis
+          role="bold">yes</emphasis> then Shorewall automatically adds these
+          addresses. If it is set to <emphasis role="bold">No</emphasis> or
+          <emphasis role="bold">no</emphasis>, you must add these addresses
+          yourself using your distribution's network configuration
+          tools.</para>
 
           <para>If this variable is not set or is given an empty value
           (ADD_SNAT_ALIASES="") then ADD_SNAT_ALIASES=No is assumed.</para>
@@ -379,10 +387,10 @@
         role="bold">ARPTABLES=</emphasis>[<emphasis>pathname</emphasis>]</term>
 
         <listitem>
-          <para>Added in Shorewall 4.5.12. This parameter names the arptables
-          executable to be used by Shorewall. If not specified or if specified
-          as a null value, then the arptables executable located using the
-          PATH option is used.</para>
+          <para>Added in Shorewall 4.5.12 and available in IPv4 only. This
+          parameter names the arptables executable to be used by Shorewall. If
+          not specified or if specified as a null value, then the arptables
+          executable located using the PATH option is used.</para>
 
           <para>Regardless of how the arptables utility is located (specified
           via arptables= or located via PATH), Shorewall uses the
@@ -398,8 +406,9 @@
         <listitem>
           <para>Formerly named AUTO_COMMENT. If set, if there is not a current
           comment when a macro is invoked, the behavior is as if the first
-          line of the macro file was "COMMENT &lt;macro name&gt;". The
-          AUTO_COMMENT option has a default value of 'Yes'.</para>
+          line of the macro file was "COMMENT &lt;macro name&gt;". If not
+          specified, the AUTO_COMMENT option has a default value of
+          'Yes'.</para>
         </listitem>
       </varlistentry>
 
@@ -465,7 +474,7 @@
           command, then the compilation step is skipped and the compiled
           script that executed the last <command>start</command>, <emphasis
           role="bold">reload</emphasis> or <command>restart</command> command
-          is used. The default is AUTOMAKE=No.</para>
+          is used. If not specified, the default is AUTOMAKE=No.</para>
 
           <para>The setting of the AUTOMAKE option is ignored if the
           <command>start</command>, <emphasis role="bold">reload</emphasis> or
@@ -483,8 +492,8 @@
           <para>Added in Shorewall 5.1.1. When USE_DEFAULT_RT=Yes, this option
           determines whether the <option>balance</option> provider option (see
           <ulink
-          url="/manpages/shorewall-providers.html">shorewall-providers(5)</ulink>) is
-          the default. When BALANCE_PROVIDERS=Yes, then the
+          url="/manpages/shorewall-providers.html">shorewall-providers(5)</ulink>)
+          is the default. When BALANCE_PROVIDERS=Yes, then the
           <option>balance</option> option is assumed unless the
           <option>fallback</option>, <option>loose</option>,
           <option>load</option> or <option>tproxy</option> option is
@@ -500,8 +509,8 @@
         <listitem>
           <para>Added in Shorewall-4.6.0. When set to <emphasis
           role="bold">Yes</emphasis>, causes entries in <ulink
-          url="/manpages/shorewall-tcfilters.html">shorewall-tcfilters(5)</ulink> to
-          generate a basic filter rather than a u32 filter. This setting
+          url="/manpages/shorewall-tcfilters.html">shorewall-tcfilters(5)</ulink>
+          to generate a basic filter rather than a u32 filter. This setting
           requires the <firstterm>Basic Ematch</firstterm> capability in your
           kernel and iptables.</para>
 
@@ -624,6 +633,11 @@
           marking defined in <ulink
           url="/manpages/shorewall-tcrules.html">shorewall-tcrules</ulink>(5).
           If not specified, CLEAR_TC=Yes is assumed.</para>
+
+          <warning>
+            <para>When you specify TC_ENABLED=shared (see below), then you
+            should also specify CLEAR_TC=No.</para>
+          </warning>
         </listitem>
       </varlistentry>
 
@@ -659,20 +673,20 @@
 
       <varlistentry>
         <term><emphasis
-        role="bold">CONFIG_PATH</emphasis>=[<emphasis>directory</emphasis>[:<emphasis>directory</emphasis>]...]</term>
+        role="bold">CONFIG_PATH</emphasis>=[[:]<emphasis>directory</emphasis>[:<emphasis>directory</emphasis>]...]</term>
 
         <listitem>
-          <para>Specifies where configuration files other than shorewall.conf
-          may be found. CONFIG_PATH is specifies as a list of directory names
-          separated by colons (":"). When looking for a configuration
-          file:</para>
+          <para>Specifies where configuration files other than
+          shorewall[6].conf may be found. CONFIG_PATH is specifies as a list
+          of directory names separated by colons (":"). When looking for a
+          configuration file:</para>
 
           <itemizedlist>
             <listitem>
               <para>If the command is "try" or a "&lt;configuration
               directory&gt;" was specified in the command (e.g.,
-              <command>shorewall check ./gateway</command>) then the directory
-              given in the command is searched first.</para>
+              <command>shorewall [-6] check ./gateway</command>) then the
+              directory given in the command is searched first.</para>
             </listitem>
 
             <listitem>
@@ -687,6 +701,16 @@
           /etc/shorewall:/usr/share/shorewall but your particular distribution
           may set it differently. See the output of shorewall show config for
           the default on your system.</para>
+
+          <para>Beginning with Shorewall 5.1.10, the CONFIG_PATH setting may
+          begin with a colon (":"), to signal that the first
+          <replaceable>directory</replaceable> listed will be skipped if the
+          user performing a compilation is not root or if the configuration is
+          being compiled for export (-e option specified or if running one of
+          the remote-* commands) . This prevents the compiler from looking in
+          <filename>/etc/shorewall[6]</filename>/ when compilation is being
+          done by a non-root user or if the generated script is to be sent to
+          a remote firewall system.</para>
         </listitem>
       </varlistentry>
 
@@ -697,8 +721,8 @@
         <listitem>
           <para>Added in Shorewall 4.5.12. When set to 'Yes' (the default),
           DNS names are validated in the compiler and then passed on to the
-          generated script where they are resolved by iptables-restore. This
-          is an advantage if you use AUTOMAKE=Yes and the IP address
+          generated script where they are resolved by ip[6]tables-restore.
+          This is an advantage if you use AUTOMAKE=Yes and the IP address
           associated with the DNS name is subject to change. When
           DEFER_DNS_RESOLUTION=No, DNS names are converted into IP addresses
           by the compiler. This has the advantage that when AUTOMAKE=Yes, the
@@ -706,6 +730,14 @@
           and <command>restart</command> commands will succeed even if no DNS
           server is reachable (assuming that the configuration hasn't changed
           since the compiled script was last generated).</para>
+
+          <important>
+            <para>When DEFER_DNS_RESOLUTION=No and AUTOMAKE=Yes and a DNS
+            change makes it necessary to recompile an existing firewall
+            script, the <option>-c</option> option must be used with the
+            <command>reload</command> or <command>restart</command> command to
+            force recompilation.</para>
+          </important>
         </listitem>
       </varlistentry>
 
@@ -715,7 +747,7 @@
 
         <listitem>
           <para>If set to Yes (the default value), entries in the
-          /etc/shorewall/rtrules files cause an 'ip rule del' command to be
+          /etc/shorewall[6]/rtrules files cause an 'ip rule del' command to be
           generated in addition to an 'ip rule add' command. Setting this
           option to No, causes the 'ip rule del' command to be omitted.</para>
         </listitem>
@@ -726,6 +758,8 @@
         role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
 
         <listitem>
+          <para>IPv4 only.</para>
+
           <para>If set to <emphasis role="bold">Yes</emphasis> or <emphasis
           role="bold">yes</emphasis>, Shorewall will detect the first IP
           address of the interface to the source zone and will include this
@@ -742,6 +776,8 @@
         role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
 
         <listitem>
+          <para>IPv4 only.</para>
+
           <para>If set to <emphasis role="bold">Yes</emphasis> or <emphasis
           role="bold">yes</emphasis>, IPv6 traffic to, from and through the
           firewall system is disabled. If set to <emphasis
@@ -761,7 +797,8 @@
             </listitem>
 
             <listitem>
-              <para>Change DISABLE_IPV6=Yes to DISABLE_IPV6=No</para>
+              <para>Change DISABLE_IPV6=Yes to DISABLE_IPV6=No in
+              <filename>/etc/shorewall/shorewall.conf</filename>.</para>
             </listitem>
 
             <listitem>
@@ -807,20 +844,21 @@
         <listitem>
           <para>Added in Shorewall 4.4.7. When set to <emphasis
           role="bold">No</emphasis> or <emphasis role="bold">no</emphasis>,
-          chain-based dynamic blacklisting using <command>shorewall
-          drop</command>, <command>shorewall reject</command>,
-          <command>shorewall logdrop</command> and <command>shorewall
-          logreject</command> is disabled. Default is <emphasis
+          chain-based dynamic blacklisting using <command>shorewall [-6] [-l]
+          drop</command>, <command>shorewall [-6] [-l] reject</command>,
+          <command>shorewall logdrop</command> and <command>shorewall [-6]
+          [-l] logreject</command> is disabled. Default is <emphasis
           role="bold">Yes</emphasis>. Beginning with Shorewall 5.0.8,
           ipset-based dynamic blacklisting using the <command>shorewall
           blacklist</command> command is also supported. The name of the set
           (<replaceable>setname</replaceable>) and the level
           (<replaceable>log_level</replaceable>), if any, at which blacklisted
-          traffic is to be logged may also be specified. The default set name
-          is SW_DBL4 and the default log level is <option>none</option> (no
-          logging). If <option>ipset-only</option> is given, then chain-based
-          dynamic blacklisting is disabled just as if DYNAMIC_BLACKLISTING=No
-          had been specified.</para>
+          traffic is to be logged may also be specified. The default IPv4 set
+          name is SW_DBL4 and the default IPv6 set name is SW_DBL6. The
+          default log level is <option>none</option> (no logging). If
+          <option>ipset-only</option> is given, then chain-based dynamic
+          blacklisting is disabled just as if DYNAMIC_BLACKLISTING=No had been
+          specified.</para>
 
           <para>Possible <replaceable>option</replaceable>s are:</para>
 
@@ -866,9 +904,9 @@
                 <important>
                   <para>Once the dynamic blacklisting ipset has been created,
                   changing this option setting requires a complete restart of
-                  the firewall; <command>shorewall restart</command> if
-                  RESTART=restart, otherwise <command>shorewall stop
-                  &amp;&amp; shorewall start</command></para>
+                  the firewall; <command>shorewall [-6] restart</command> if
+                  RESTART=restart, otherwise <command>shorewall [-6] [-l] stop
+                  &amp;&amp; shorewall [-6] [-l] start</command></para>
                 </important>
               </listitem>
             </varlistentry>
@@ -910,13 +948,15 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
 
         <listitem>
           <para>Added in Shorewall 4.4.17. When set to Yes when compiling for
-          use by Shorewall Lite (<command>shorewall load</command>,
-          <command>shorewall reload </command>or <command>shorewall
+          use by Shorewall Lite (<command>shorewall [-6]
+          remote-start</command>, <command>shorewall [-6] remote-reload,
+          shorewall [-6] remote-restart </command>or <command>shorewall [-6]
           export</command> commands), the compiler will copy the modules or
           helpers file from the administrative system into the script. When
           set to No or not specified, the compiler will not copy the modules
-          or helpers file from <filename>/usr/share/shorewall</filename> but
-          will copy those found in another location on the CONFIG_PATH.</para>
+          or helpers file from <filename>/usr/share/shorewall[6]</filename>
+          but will copy those found in another location on the
+          CONFIG_PATH.</para>
 
           <para>When compiling for direct use by Shorewall, causes the
           contents of the local module or helpers file to be copied into the
@@ -1114,10 +1154,12 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
           specificaitons</ulink> on the right.. When INLINE_MATCHES=Yes is
           specified, the specifications on the right are interpreted as if
           INLINE had been specified in the ACTION column. This also applies to
-          <ulink url="/manpages/shorewall-masq.html">shorewall-masq(5)</ulink> and
-          <ulink url="/manpages/shorewall-mangle.html">shorewall-mangle(5</ulink>) which
-          also support INLINE. If not specified or if specified as the empty
-          value, the value 'No' is assumed for backward compatibility.</para>
+          <ulink url="/manpages/shorewall-masq.html">shorewall-masq(5)</ulink>
+          and <ulink
+          url="/manpages/shorewall-mangle.html">shorewall-mangle(5</ulink>)
+          which also support INLINE. If not specified or if specified as the
+          empty value, the value 'No' is assumed for backward
+          compatibility.</para>
 
           <para>Beginning with Shorewall 5.0.0, it is no longer necessary to
           set INLINE_MATCHES=Yes in order to be able to specify your own
@@ -1176,9 +1218,13 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
         role="bold">Keep</emphasis>]</term>
 
         <listitem>
-          <para>This parameter determines whether Shorewall enables or
-          disables IPV4 Packet Forwarding (/proc/sys/net/ipv4/ip_forward).
-          Possible values are:</para>
+          <para>This IPv4 parameter determines whether Shorewall enables or
+          disables IPv4 Packet Forwarding
+          (<filename>/proc/sys/net/ipv4/ip_forward</filename>). In an IPv6
+          configuration, this parameter determines the setting of
+          <filename>/proc/sys/net/ipv6/config/all/ip_forwarding</filename>.</para>
+
+          <para>Possible values are:</para>
 
           <variablelist>
             <varlistentry>
@@ -1210,12 +1256,8 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
             </varlistentry>
           </variablelist>
 
-          <para/>
-
-          <blockquote>
-            <para>If this variable is not set or is given an empty value
-            (IP_FORWARD="") then IP_FORWARD=On is assumed.</para>
-          </blockquote>
+          <para>If this variable is not set or is given an empty value
+          (IP_FORWARD="") then IP_FORWARD=On is assumed.</para>
         </listitem>
       </varlistentry>
 
@@ -1258,6 +1300,8 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
         role="bold">IPTABLES=</emphasis>[<emphasis>pathname</emphasis>]</term>
 
         <listitem>
+          <para>IPv4 only.</para>
+
           <para>This parameter names the iptables executable to be used by
           Shorewall. If not specified or if specified as a null value, then
           the iptables executable located using the PATH option is
@@ -1270,22 +1314,71 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis
+        role="bold">IP6TABLES=</emphasis>[<emphasis>pathname</emphasis>]</term>
+
+        <listitem>
+          <para>IPv6 only.</para>
+
+          <para>This parameter names the ip6tables executable to be used by
+          Shorewall6. If not specified or if specified as a null value, then
+          the ip6tables executable located using the PATH option is
+          used.</para>
+
+          <para>Regardless of how the ip6tables utility is located (specified
+          via IP6TABLES= or located via PATH), Shorewall6 uses the
+          ip6tables-restore and ip6tables-save utilities from that same
+          directory.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">KEEP_RT_TABLES=</emphasis>{<emphasis
         role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>
 
         <listitem>
-          <para>When set to <option>Yes</option>, this option prevents
-          generated scripts from altering the /etc/iproute2/rt_tables database
-          when there are entries in
-          <filename>/etc/shorewall/providers</filename>. If you set this
-          option to <option>Yes</option> while Shorewall (Shorewall-lite) is
-          running, you should remove the file
-          <filename>/var/lib/shorewall/rt_tables</filename>
-          (<filename>/var/lib/shorewall-lite/rt_tables</filename>) before your
-          next <command>stop</command>, <command>refresh</command>,
-          <command>restore</command>, <emphasis role="bold">reload</emphasis>
-          or <command>restart</command> command.</para>
+          <para>IPv4:</para>
+
+          <blockquote>
+            <para>When set to <option>Yes</option>, this option prevents
+            generated scripts from altering the /etc/iproute2/rt_tables
+            database when there are entries in
+            <filename>/etc/shorewall/providers</filename>. If you set this
+            option to <option>Yes</option> while Shorewall (Shorewall-lite) is
+            running, you should remove the file
+            <filename>/var/lib/shorewall/rt_tables</filename>
+            (<filename>/var/lib/shorewall-lite/rt_tables</filename>) before
+            your next <command>stop</command>, <command>refresh</command>,
+            <command>restore</command>, <emphasis
+            role="bold">reload</emphasis> or <command>restart</command>
+            command.</para>
+          </blockquote>
+
+          <para>IPv6:</para>
+
+          <blockquote>
+            <para>When set to <option>Yes</option>, this option prevents
+            scripts generated by Shorewall6 from altering the
+            /etc/iproute2/rt_tables database when there are entries in
+            <filename>/etc/shorewall6/providers</filename>. If you set this
+            option to <option>Yes</option> while Shorewall6 (Shorewall6-lite)
+            is running, you should remove the file
+            <filename>/var/lib/shorewall6/rt_tables</filename>
+            (<filename>/var/lib/shorewall6-lite/rt_tables</filename>) before
+            your next <command>stop</command>, <command>refresh</command>,
+            <command>restore</command>, <emphasis
+            role="bold">reload</emphasis> or <command>restart</command>
+            command.</para>
+          </blockquote>
+
+          <important>
+            <para>When both IPv4 and IPv6 Shorewall configurations are
+            present, KEEP_RT_TABLES=No should be specified in only one of the
+            two configurations unless the two provider configurations are
+            identical with respect to interface and provider names and
+            numbers.</para>
+          </important>
 
           <para>The default is KEEP_RT_TABLES=No.</para>
         </listitem>
@@ -1298,9 +1391,9 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
         <listitem>
           <para>Added in Shorewall 4.4.7. When set to Yes, restricts the set
           of modules loaded by shorewall to those listed in
-          /var/lib/shorewall/helpers and those that are actually used. When
-          not set, or set to the empty value, LOAD_HELPERS_ONLY=No is
-          assumed.</para>
+          <filename>/var/lib/shorewall[6]/helpers</filename> and those that
+          are actually used. When not set, or set to the empty value,
+          LOAD_HELPERS_ONLY=No is assumed.</para>
         </listitem>
       </varlistentry>
 
@@ -1309,11 +1402,11 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
         role="bold">LOCKFILE</emphasis>=[<emphasis>pathname</emphasis>]</term>
 
         <listitem>
-          <para>Specifies the name of the Shorewall lock file, used to prevent
-          simultaneous state-changing commands. If not specified,
-          ${VARDIR}/shorewall/lock is assumed (${VARDIR} is normally /var/lib
-          but can be changed when Shorewall-core is installed -- see the
-          output of <command>shorewall show vardir</command>).</para>
+          <para>Specifies the name of the Shorewall[6] lock file, used to
+          prevent simultaneous state-changing commands. If not specified,
+          ${VARDIR}/shorewall[6]/lock is assumed (${VARDIR} is normally
+          /var/lib but can be changed when Shorewall-core is installed -- see
+          the output of <command>shorewall show vardir</command>).</para>
         </listitem>
       </varlistentry>
 
@@ -1341,6 +1434,8 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
               <term>ULOG</term>
 
               <listitem>
+                <para>IPv4 only.</para>
+
                 <para>Use ULOG logging to ulogd.</para>
               </listitem>
             </varlistentry>
@@ -1365,8 +1460,8 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
           sample configurations use this as the default log level and changing
           it will change all packet logging done by the configuration. In any
           configuration file (except <ulink
-          url="/manpages/shorewall-params.html">shorewall-params(5)</ulink>), $LOG_LEVEL
-          will expand to this value.</para>
+          url="/manpages/shorewall-params.html">shorewall-params(5)</ulink>),
+          $LOG_LEVEL will expand to this value.</para>
         </listitem>
       </varlistentry>
 
@@ -1376,6 +1471,8 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
         role="bold">No</emphasis>|Keep]</term>
 
         <listitem>
+          <para>IPv4 only.</para>
+
           <para>If set to <emphasis role="bold">Yes</emphasis> or <emphasis
           role="bold">yes</emphasis>, sets
           <filename>/proc/sys/net/ipv4/conf/*/log_martians</filename> to 1
@@ -1487,10 +1584,9 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
           log</emphasis>, and <emphasis role="bold">hits</emphasis> commands.
           If not assigned or if assigned an empty value, /var/log/messages is
           assumed. For further information, see <ulink
-          url="/manpages/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.
-          Beginning with Shorewall 5.0.10.1, you may specify
-          <option>systemd</option> to use <command>journelctl -r</command> to
-          read the log.</para>
+          url="shorewall-logging.html">shorewall-logging(8)</ulink>. Beginning
+          with Shorewall 5.0.10.1, you may specify <option>systemd</option> to
+          use <command>journelctl -r</command> to read the log.</para>
         </listitem>
       </varlistentry>
 
@@ -1523,7 +1619,9 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
 
           <caution>
             <para>Beginning with Shorewall 5.1.0, the default and sample
-            shorewall.conf files set LOGFORMAT="%s %s ". Shorewall log
+            shorewall[6].conf files set LOGFORMAT="%s %s ".</para>
+
+            <para>Regardless of the LOGFORMAT setting, Shorewall IPv4 log
             messages that use this LOGFORMAT can be uniquely identified using
             the following regular expression:</para>
 
@@ -1531,8 +1629,15 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
               <member>'IN=.* OUT=.* SRC=.*\..* DST='</member>
             </simplelist>
 
-            <para>To match all Netfilter log messages (Both IPv4 and IPv6),
-            use:</para>
+            <para>and Shorewall IPv6 log messages can be uniquely identified
+            using the following regular expression:</para>
+
+            <simplelist>
+              <member>'IN=.* OUT=.* SRC=.*:.* DST='</member>
+            </simplelist>
+
+            <para>To match all Netfilter log messages (Both IPv4 and IPv6 and
+            regardless of the LOGFORMAT setting), use:</para>
 
             <simplelist>
               <member>'IN=.* OUT=.* SRC=.* DST='</member>
@@ -1625,7 +1730,7 @@ LOG:info:,bar                        net                    fw</programlisting>
 
           <para>A_DROP and A_REJECT are audited versions of DROP and REJECT
           respectively and were added in Shorewall 4.4.20. They require
-          AUDIT_TARGET in the kernel and iptables.</para>
+          AUDIT_TARGET in the kernel and ip[6]tables.</para>
         </listitem>
       </varlistentry>
 
@@ -1668,7 +1773,7 @@ LOG:info:,bar                        net                    fw</programlisting>
           entries in <ulink
           url="/manpages/shorewall-maclist.html">shorewall-maclist</ulink>(5)
           can be improved by setting the MACLIST_TTL variable in <ulink
-          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
+          url="/manpages/shorewall.conf.html">shorewall[6].conf</ulink>(5).</para>
 
           <para>If your iptables and kernel support the "Recent Match" (see
           the output of "shorewall check" near the top), you can cache the
@@ -1710,6 +1815,8 @@ LOG:info:,bar                        net                    fw</programlisting>
         role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
 
         <listitem>
+          <para>IPv4 only.</para>
+
           <para>This option is included for compatibility with old Shorewall
           configuration. New installs should always have
           MAPOLDACTIONS=No.</para>
@@ -1740,11 +1847,11 @@ LOG:info:,bar                        net                    fw</programlisting>
           PREROUTING chain. This permits you to mark inbound traffic based on
           its destination address when DNAT is in use. To determine if your
           kernel has a FORWARD chain in the mangle table, use the <emphasis
-          role="bold">shorewall show mangle</emphasis> command; if a FORWARD
-          chain is displayed then your kernel will support this option. If
-          this option is not specified or if it is given the empty value
-          (e.g., MARK_IN_FORWARD_CHAIN="") then MARK_IN_FORWARD_CHAIN=No is
-          assumed.</para>
+          role="bold">shorewall [-6] show mangle</emphasis> command; if a
+          FORWARD chain is displayed then your kernel will support this
+          option. If this option is not specified or if it is given the empty
+          value (e.g., MARK_IN_FORWARD_CHAIN="") then MARK_IN_FORWARD_CHAIN=No
+          is assumed.</para>
         </listitem>
       </varlistentry>
 
@@ -1802,18 +1909,6 @@ LOG:info:,bar                        net                    fw</programlisting>
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term><emphasis role="bold">MODULE_SUFFIX=</emphasis>[<emphasis
-        role="bold">"</emphasis><emphasis>extension</emphasis> ...<emphasis
-        role="bold">"</emphasis>]</term>
-
-        <listitem>
-          <para>The value of this option determines the possible file
-          extensions of kernel modules. The default value is "ko ko.gz ko.xz o
-          o.gz o.xz gz xz".</para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term><emphasis
         role="bold">MODULESDIR=</emphasis>[[+]<emphasis>pathname</emphasis>[<emphasis
@@ -1826,7 +1921,8 @@ LOG:info:,bar                        net                    fw</programlisting>
           "/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset"
           where <emphasis role="bold">uname</emphasis> holds the output of
           '<command>uname -r</command>' and <emphasis
-          role="bold">g_family</emphasis> holds '4'.</para>
+          role="bold">g_family</emphasis> holds '4' in IPv4 configurations and
+          '6' in IPv6 configurations.</para>
 
           <para>The option plus sign ('+') was added in Shorewall 5.0.3 and
           causes the listed pathnames to be appended to the default list
@@ -1839,6 +1935,8 @@ LOG:info:,bar                        net                    fw</programlisting>
         role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
 
         <listitem>
+          <para>IPv4 only.</para>
+
           <para>This option will normally be set to 'No' (the default). It
           should be set to 'Yes' under the following circumstances:</para>
 
@@ -1865,17 +1963,18 @@ LOG:info:,bar                        net                    fw</programlisting>
 
         <listitem>
           <para>The value of this variable determines the number of seconds
-          that programs will wait for exclusive access to the Shorewall lock
-          file. After the number of seconds corresponding to the value of this
-          variable, programs will assume that the last program to hold the
-          lock died without releasing the lock.</para>
+          that programs will wait for exclusive access to the Shorewall[6]
+          lock file. After the number of seconds corresponding to the value of
+          this variable, programs will assume that the last program to hold
+          the lock died without releasing the lock.</para>
 
           <para>If not set or set to the empty value, a value of 60 (60
           seconds) is assumed.</para>
 
           <para>An appropriate value for this parameter would be twice the
           length of time that it takes your firewall system to process a
-          <emphasis role="bold">shorewall restart</emphasis> command.</para>
+          <emphasis role="bold">shorewall [-6] restart</emphasis>
+          command.</para>
         </listitem>
       </varlistentry>
 
@@ -1899,6 +1998,8 @@ LOG:info:,bar                        net                    fw</programlisting>
         role="bold">prohibit</emphasis>]</term>
 
         <listitem>
+          <para>IPv4 only.</para>
+
           <para>When set to Yes, causes Shorewall to null-route the IPv4
           address ranges reserved by RFC1918. The default value is
           'No'.</para>
@@ -1935,12 +2036,11 @@ LOG:info:,bar                        net                    fw</programlisting>
           <itemizedlist>
             <listitem>
               <para>Optimization category 1 - Traditionally, Shorewall has
-              created rules for the complete matrix of
-              host groups defined by the zones, interfaces and hosts
-              files. Any traffic that didn't correspond to an element
-              of that matrix was rejected in one of the built-in chains. When
-              the matrix is sparse, this results in lots of largely useless
-              rules.</para>
+              created rules for the complete matrix of host groups defined by
+              the zones, interfaces and hosts files. Any traffic that didn't
+              correspond to an element of that matrix was rejected in one of
+              the built-in chains. When the matrix is sparse, this results in
+              lots of largely useless rules.</para>
 
               <para>These extra rules can be eliminated by setting the 1 bit
               in OPTIMIZE.</para>
@@ -2118,8 +2218,9 @@ LOG:info:,bar                        net                    fw</programlisting>
             </listitem>
           </itemizedlist>
 
-          <para>The default value is zero which disables all
-          optimizations.</para>
+          <para>In versions prior to 5.1.0, the default value is zero which
+          disables all optimizations. Beginning with Shorewall 5.1.0, the
+          default value is All which enables all optimizations.</para>
         </listitem>
       </varlistentry>
 
@@ -2316,7 +2417,7 @@ RCP_COMMAND: scp ${files} ${root}@${system}:${destination}</programlisting>
 
             <listitem>
               <para>if the protocol is UDP (17) then the packet is rejected
-              with an 'port-unreachable' ICMP (ICMP6).</para>
+              with an 'port-unreachable' ICMP.</para>
             </listitem>
 
             <listitem>
@@ -2324,6 +2425,11 @@ RCP_COMMAND: scp ${files} ${root}@${system}:${destination}</programlisting>
               with a 'host-unreachable' ICMP.</para>
             </listitem>
 
+            <listitem>
+              <para>if the protocol is ICMP6 (1) then the packet is rejected
+              with a 'icmp6-addr-unreachable' ICMP6.</para>
+            </listitem>
+
             <listitem>
               <para>otherwise, the packet is rejected with a 'host-prohibited'
               ICMP.</para>
@@ -2333,11 +2439,12 @@ RCP_COMMAND: scp ${files} ${root}@${system}:${destination}</programlisting>
           <para>You can modify this behavior by implementing your own
           <replaceable>action</replaceable> that handles REJECT and specifying
           it's name in this option. The <emphasis role="bold">nolog</emphasis>
-          and <emphasis role="bold">inline</emphasis> options will
+          and <emphasis role="bold">noinline</emphasis> options will
           automatically be assumed for the specified
           <replaceable>action</replaceable>.</para>
 
-          <para>The following action implements the standard behavior:</para>
+          <para>The following action implements the default reject
+          action:</para>
 
           <programlisting>?format 2
 #TARGET         SOURCE  DEST    PROTO
@@ -2437,10 +2544,10 @@ INLINE          -       -       -       ;; -j REJECT
         <listitem>
           <para>Specifies the simple name of a file in /var/lib/shorewall to
           be used as the default restore script in the <emphasis
-          role="bold">shorewall save</emphasis>, <emphasis
-          role="bold">shorewall restore</emphasis>, <emphasis
-          role="bold">shorewall forget </emphasis>and <emphasis
-          role="bold">shorewall -f start</emphasis> commands.</para>
+          role="bold">shorewall [-6] save</emphasis>, <emphasis
+          role="bold">shorewall [-6] restore</emphasis>, <emphasis
+          role="bold">shorewall [-6] forget </emphasis>and <emphasis
+          role="bold">shorewall [6] -f start</emphasis> commands.</para>
         </listitem>
       </varlistentry>
 
@@ -2449,6 +2556,8 @@ INLINE          -       -       -       ;; -j REJECT
         role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>
 
         <listitem>
+          <para>IPv4 only.</para>
+
           <para>During <emphasis role="bold">shorewall star</emphasis>t, IP
           addresses to be added as a consequence of ADD_IP_ALIASES=Yes and
           ADD_SNAT_ALIASES=Yes are quietly deleted when <ulink
@@ -2461,7 +2570,7 @@ INLINE          -       -       -       ;; -j REJECT
           not be deleted. Regardless of the setting of RETAIN_ALIASES,
           addresses added during <emphasis role="bold">shorewall
           start</emphasis> are still deleted at a subsequent <emphasis
-          role="bold">shorewall stop</emphasis>, <emphasis
+          role="bold">shorewall [stop</emphasis>, <emphasis
           role="bold">shorewall reload</emphasis> or <emphasis
           role="bold">shorewall restart</emphasis>.</para>
         </listitem>
@@ -2981,6 +3090,40 @@ INLINE          -       -       -       ;; -j REJECT
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">USE_NFLOG_SIZE=</emphasis>[<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.1.5. The second parameter to the NFLOG
+          target specifies how many bytes of the packet to copy to the log; if
+          omitted or if supplied as zero, the entire packet is copied. This
+          feature has traditionally been implemented using the --nflog-range
+          option to the NFLOG iptables target. Unfortuntely, the --nflog-range
+          option never worked (the entire packet was always copied). To deal
+          with this issue, the Netfilter team:</para>
+
+          <itemizedlist>
+            <listitem>
+              <para>Added a warning message when --nflog-range is used</para>
+            </listitem>
+
+            <listitem>
+              <para>Added --nflog-size which works like --nflog-range was
+              intended to work.</para>
+            </listitem>
+          </itemizedlist>
+
+          <para>When USE_NFLOG_SIZE=Yes, Shorewall will attempt to use the new
+          --nflog-size feature. If that feature is not available in the
+          running kernel and ip[6]tables, an error is raised.</para>
+
+          <para>When USE_NFLOG_SIZE is not supplied, USE_NFLOG_SIZE=No is
+          assumed. When USE_NFLOG_SIZE is added by shorewall update, it is
+          added with setting No.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">USE_PHYSICAL_NAMES=</emphasis>[<emphasis
         role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
@@ -3150,19 +3293,13 @@ INLINE          -       -       -       ;; -j REJECT
     <title>FILES</title>
 
     <para>/etc/shorewall/shorewall.conf</para>
+
+    <para>/etc/shorewall6/shorewall6.conf</para>
   </refsect1>
 
   <refsect1>
     <title>See ALSO</title>
 
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
-    shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcinterfaces(5),
-    shorewall-tcpri(5), shorewall-tcrules(5), shorewall-tos(5),
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+    <para>shorewall(8)</para>
   </refsect1>
 </refentry>

Shorewall6-lite/shorecap

@@ -28,7 +28,7 @@
 #
 #   On the target system (the system where the firewall program is to run):
 #
-#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] [ MODULE_SUFFIX="<module suffix list>" ] shorecap > capabilities
+#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] shorecap > capabilities
 #
 #    Now move the capabilities file to the compilation system. The file must
 #    be placed in a directory on the CONFIG_PATH to be used when compiling firewalls
@@ -38,7 +38,6 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
-#        MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not

Shorewall6-lite/shorewall6-lite.service

@@ -8,6 +8,7 @@
 Description=Shorewall IPv6 firewall (lite)
 Wants=network-online.target
 After=network-online.target
+After=shorewall-lite.service
 Conflicts=ip6tables.service firewalld.service
 
 [Service]

Shorewall6-lite/shorewall6-lite.service.debian

@@ -7,6 +7,7 @@
 Description=Shorewall IPv6 firewall (lite)
 Wants=network-online.target
 After=network-online.target
+After=shorewall-lite.service
 Conflicts=ip6tables.service firewalld.service
 
 [Service]