Clean up column/value pair editing.

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -1,8 +1,8 @@
 #!/bin/bash
 #
-#     Shorewall Packet Filtering Firewall configuration program - V5.2
+#     Shorewall Packet Filtering Firewall RPM configuration program - V4.6
 #
-#     (c) 2012,2014,2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2012,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	Shorewall documentation is available at http://www.shorewall.net
 #
@@ -109,9 +109,6 @@ if [ -z "$vendor" ]; then
 	    opensuse)
 		vendor=suse
 		;;
-	    alt|basealt|altlinux)
-		vendor=alt
-		;;
 	    *)
 		vendor="$ID"
 		;;
@@ -135,8 +132,6 @@ if [ -z "$vendor" ]; then
 	    if [ -f /etc/debian_version ]; then
 		params[HOST]=debian
 		ls -l /sbin/init | fgrep -q systemd &&  rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
-	    elif [ -f /etc/altlinux-release ] ; then
-		params[HOST]=alt
 	    elif [ -f /etc/redhat-release ]; then
 		params[HOST]=redhat
 		rcfile=shorewallrc.redhat
@@ -195,7 +190,7 @@ for p in ${!params[@]}; do
 done
 
 echo '#'                                                                 > shorewallrc
-echo "# Created by Shorewall Core version $VERSION configure - " `date --utc --date="@${SOURCE_DATE_EPOCH:-$(date +%s)}"` >> shorewallrc
+echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
 echo "# rc file: $rcfile"                                               >> shorewallrc
 echo '#'                                                                >> shorewallrc
 

Shorewall-core/configure.pl

@@ -1,6 +1,6 @@
 #! /usr/bin/perl -w
 #
-#     Shorewall Packet Filtering Firewall configuration program - V5.2
+#     Shorewall Packet Filtering Firewall RPM configuration program - V4.5
 #
 #     (c) 2012, 2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -74,8 +74,6 @@ unless ( defined $vendor ) {
 	} elsif ( $id eq 'ubuntu' || $id eq 'debian' ) {
 	    my $init = `ls -l /sbin/init`;
 	    $vendor = $init =~ /systemd/ ? 'debian.systemd' : 'debian.sysvinit';
-	} elsif ( $id eq 'alt' || $id eq 'basealt' || $id eq 'altlinux' ) {
-	    $vendor = 'alt';
 	} else {
 	    $vendor = $id;
 	}
@@ -119,9 +117,6 @@ if ( defined $vendor ) {
 	} else {
 	    $rcfilename = 'shorewallrc.debian.sysvinit';
 	}
-    } elsif ( -f '/etc/altlinux-release' ){
-	$vendor = 'alt';
-	$rcfilename = 'shorewallrc.alt';
     } elsif ( -f '/etc/redhat-release' ){
 	$vendor = 'redhat';
 	$rcfilename = 'shorewallrc.redhat';
@@ -178,12 +173,7 @@ my $outfile;
 
 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
 
-if ( $ENV{SOURCE_DATE_EPOCH} ) {
-    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s\n", VERSION, `date  --utc --date=\"\@$ENV{SOURCE_DATE_EPOCH}\"`;
-} else {
-    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
-}
-
+printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
 print $outfile "# rc file: $rcfilename\n#\n";
 
 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;

Shorewall-core/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Core Modules
 #
-#     (c) 2000-2018 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -172,9 +172,6 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
-		    alt|basealt|altlinux)
-			BUILD=alt
-			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -183,8 +180,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
-	    elif [ -f /etc/altlinux-release ]; then
-		BUILD=alt
 	    elif [ -f /etc/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f /etc/slackware-version ] ; then
@@ -243,7 +238,7 @@ case "$HOST" in
     apple)
 	echo "Installing Mac-specific configuration...";
 	;;
-    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt|alt)
+    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
 	;;
     *)
 	fatal_error "Unknown HOST \"$HOST\""
@@ -340,8 +335,9 @@ for f in lib.* ; do
 done
 
 if [ $SHAREDIR != /usr/share ]; then
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/lib.base
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/lib.cli
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.core
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.cli
 fi
 
 #

Shorewall-core/lib.base

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/lib.base
+# Shorewall 5.0 -- /usr/share/shorewall/lib.base
 #
-#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #

Shorewall-core/lib.common

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/lib.common
+# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
 #
-#     (c) 2010-2018 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -269,48 +269,53 @@ loadmodule() # $1 = module name, $2 - * arguments
 {
     local modulename
     modulename=$1
-    shift
-    local moduleoptions
-    moduleoptions=$*
     local modulefile
     local suffix
 
     if [ -d /sys/module/ ]; then
 	if ! list_search $modulename $DONT_LOAD; then
 	    if [ ! -d /sys/module/$modulename ]; then
-		case $moduleloader in
-		    insmod)
-			for directory in $moduledirectories; do
-			    for modulefile in $directory/${modulename}.*; do
-				if [ -f $modulefile ]; then
-				    insmod $modulefile $moduleoptions
-				    return
-				fi
-			    done
-			done
-			;;
-		    *)
-			modprobe -q $modulename $moduleoptions
-			;;
-		esac
-	    fi
-	fi
-    elif ! list_search $modulename $DONT_LOAD $MODULES; then
-	case $moduleloader in
-	    insmod)
-		for directory in $moduledirectories; do
-		    for modulefile in $directory/${modulename}.*; do
+		shift
+
+		for suffix in $MODULE_SUFFIX ; do
+		    for directory in $moduledirectories; do
+			modulefile=$directory/${modulename}.${suffix}
+
 			if [ -f $modulefile ]; then
-			    insmod $modulefile $moduleoptions
-			    return
+			    case $moduleloader in
+				insmod)
+				    insmod $modulefile $*
+				    ;;
+				*)
+				    modprobe $modulename $*
+				    ;;
+			    esac
+			    break 2
 			fi
 		    done
 		done
-		;;
-	    *)
-		modprobe -q $modulename $moduleoptions
-		;;
-	esac
+	    fi
+	fi
+    elif ! list_search $modulename $DONT_LOAD $MODULES; then
+	shift
+
+	for suffix in $MODULE_SUFFIX ; do
+	    for directory in $moduledirectories; do
+		modulefile=$directory/${modulename}.${suffix}
+
+		if [ -f $modulefile ]; then
+		    case $moduleloader in
+			insmod)
+			    insmod $modulefile $*
+			    ;;
+			*)
+			    modprobe $modulename $*
+			    ;;
+		    esac
+		    break 2
+		fi
+	    done
+	done
     fi
 }
 
@@ -333,6 +338,8 @@ reload_kernel_modules() {
 	moduleloader=insmod
     fi
 
+    [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
+
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)
@@ -387,6 +394,8 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	moduleloader=insmod
     fi
 
+    [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
+
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)
@@ -411,7 +420,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
     done
 
-    modules=$(find_file helpers)
+    [ -n "$LOAD_HELPERS_ONLY" ] && modules=$(find_file helpers) || modules=$(find_file modules)
 
     if [ -f $modules -a -n "$moduledirectories" ]; then
 	[ -d /sys/module/ ] || MODULES=$(lsmod | cut -d ' ' -f1)
@@ -419,7 +428,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	. $modules
 	if [ $savemoduleinfo = Yes ]; then
 	    [ -d ${VARDIR} ] || mkdir -p ${VARDIR}
-	    echo MODULESDIR=\"$MODULESDIR\" > ${VARDIR}/.modulesdir
+	    echo MODULESDIR="$MODULESDIR" > ${VARDIR}/.modulesdir
 	    cp -f $modules ${VARDIR}/.modules
 	fi
     elif [ $savemoduleinfo = Yes ]; then
@@ -501,7 +510,7 @@ ip_network() {
 
 #
 # The following hack is supplied to compensate for the fact that many of
-# the popular light-weight Bourne shell derivatives do not support XOR ("^").
+# the popular light-weight Bourne shell derivatives don't support XOR ("^").
 #
 ip_broadcast() {
     local x
@@ -751,44 +760,36 @@ mutex_on()
     lockf=${LOCKFILE:=${VARDIR}/lock}
     local lockpid
     local lockd
-    local lockbin
-    local openwrt
 
     MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}
 
-    if [ -z "$g_havemutex" -a $MUTEX_TIMEOUT -gt 0 ]; then
+    if [ $MUTEX_TIMEOUT -gt 0 ]; then
 
 	lockd=$(dirname $LOCKFILE)
 
 	[ -d "$lockd" ] || mkdir -p "$lockd"
 
-	lockbin=$(mywhich lock)
-	[ -n "$lockbin" -a -h "$lockbin" ] && openwrt=Yes
-
 	if [ -f $lockf ]; then
 	    lockpid=`cat ${lockf} 2> /dev/null`
-	    if [ -z "$lockpid" ] || [ $lockpid = 0 ]; then
+	    if [ -z "$lockpid" -o $lockpid = 0 ]; then
 		rm -f ${lockf}
 		error_message "WARNING: Stale lockfile ${lockf} removed"
-	    elif [ -z "$openwrt" ]; then
-		if [ $lockpid -eq $$ ]; then
-                    fatal_error "Mutex_on confusion"
-		elif ! qt ps --pid ${lockpid}; then
-		    rm -f ${lockf}
-		    error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
-		fi
+	    elif [ $lockpid -eq $$ ]; then
+                return 0
+	    elif ! ps | grep -v grep | qt grep ${lockpid}; then
+		rm -f ${lockf}
+		error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
 	    fi
 	fi
 
-	if [ -n "$openwrt" ]; then
-	    lock ${lockf} || fatal_error "Can't lock ${lockf}"
-	    g_havemutex="lock -u ${lockf}"
-	elif qt mywhich lockfile; then
-	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf} || fatal_error "Can't lock ${lockf}"
-	    g_havemutex="rm -f ${lockf}"
+	if qt mywhich lockfile; then
+	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf}
 	    chmod u+w ${lockf}
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
+	elif qt mywhich lock; then
+            lock ${lockf}
+            chmod u=r ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1
@@ -798,15 +799,10 @@ mutex_on()
 	    if  [ ${try} -lt ${MUTEX_TIMEOUT} ] ; then
 	        # Create the lockfile
 		echo $$ > ${lockf}
-		g_havemutex="rm -f ${lockf}"
 	    else
 		echo "Giving up on lock file ${lockf}" >&2
 	    fi
 	fi
-
-	if [ -n "$g_havemutex" ]; then
-	    trap mutex_off EXIT
-	fi
     fi
 }
 
@@ -815,10 +811,7 @@ mutex_on()
 #
 mutex_off()
 {
-    if [ -n "$g_havemutex" ]; then
-	eval $g_havemutex
-	g_havemutex=
-	trap '' exit
-    fi
+    [ -f ${CONFDIR}/rc.common ] && lock -u ${LOCKFILE:=${VARDIR}/lock}
+    rm -f ${LOCKFILE:=${VARDIR}/lock}
 }
 

Shorewall-core/lib.core

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/lib.core
+# Shorewall 5.0 -- /usr/share/shorewall/lib.core
 #
-#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -24,7 +24,7 @@
 # generated scripts.
 #
 
-SHOREWALL_LIBVERSION=50108
+SHOREWALL_LIBVERSION=50100
 
 #
 # Fatal Error

Shorewall-core/lib.installer

@@ -1,5 +1,6 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/lib.installer
+#
+# Shorewall 5.0 -- /usr/share/shorewall/lib.installer.
 #
 #     (c) 2017 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)

Shorewall-core/lib.uninstaller

@@ -1,5 +1,6 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/lib.installer
+#
+# Shorewall 5.0 -- /usr/share/shorewall/lib.installer.
 #
 #     (c) 2017 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
@@ -60,7 +61,7 @@ mywhich() {
 remove_file() # $1 = file to remove
 {
     if [ -n "$1" ] ; then
-        if [ -f $1 -o -h $1 ] ; then
+        if [ -f $1 -o -L $1 ] ; then
             rm -f $1
             echo "$1 Removed"
         fi
@@ -84,7 +85,7 @@ remove_file_with_wildcard() # $1 = file with wildcard to remove
             if [ -d $f ] ; then
                 rm -rf $f
                 echo "$f Removed"
-            elif [ -f $f -o -h $f ] ; then
+            elif [ -f $f -o -L $f ] ; then
                 rm -f $f
                 echo "$f Removed"
             fi

Shorewall-core/manpages/shorewall.xml

@@ -405,6 +405,20 @@
       <replaceable>provider</replaceable> }</arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall[6]</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>options</arg>
+
+      <arg
+      choice="plain"><option>refresh</option><arg><option>-n</option></arg><arg><option>-d</option></arg><arg><option>-T</option></arg><arg><option>-i</option></arg><arg>-<option>D</option>
+      <replaceable>directory</replaceable> </arg><arg
+      rep="repeat"><replaceable>chain</replaceable></arg></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall[6][-lite]</command>
 
@@ -445,54 +459,6 @@
       <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall[6]</command>
-
-      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
-
-      <arg>options</arg>
-
-      <arg choice="plain"><option>remote-getcaps</option></arg>
-
-      <arg><option>-s</option></arg>
-
-      <arg><option>-R</option></arg>
-
-      <arg><option>-r</option> <replaceable>root-user-name</replaceable></arg>
-
-      <arg><option>-T</option></arg>
-
-      <arg><option>-i</option></arg>
-
-      <arg><arg><option>-D</option></arg><replaceable>directory</replaceable></arg>
-
-      <arg choice="plain"><arg><replaceable>system</replaceable></arg></arg>
-    </cmdsynopsis>
-
-    <cmdsynopsis>
-      <command>shorewall[6]</command>
-
-      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
-
-      <arg>options</arg>
-
-      <arg choice="plain"><option>remote-getrc</option></arg>
-
-      <arg><option>-s</option></arg>
-
-      <arg><option>-c</option></arg>
-
-      <arg><option>-r</option> <replaceable>root-user-name</replaceable></arg>
-
-      <arg><option>-T</option></arg>
-
-      <arg><option>-i</option></arg>
-
-      <arg><arg><option>-D</option></arg><replaceable>directory</replaceable></arg>
-
-      <arg choice="plain"><arg><replaceable>system</replaceable></arg></arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall[6]</command>
 
@@ -847,7 +813,7 @@
 
       <arg choice="req"><option>show | list | ls </option></arg>
 
-      <arg choice="plain"><option>saves</option></arg>
+      <arg choice="plain"><option>tc</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -1350,7 +1316,7 @@
           by the compiled script that executed the last successful <emphasis
           role="bold">start</emphasis>, <emphasis
           role="bold">restart</emphasis> or <emphasis
-          role="bold">reload</emphasis> command if that script exists.</para>
+          role="bold">refresh</emphasis> command if that script exists.</para>
         </listitem>
       </varlistentry>
 
@@ -1807,6 +1773,63 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">refresh </emphasis> [-<option>n</option>]
+        [-<option>d</option>] [-<option>T</option>] [-i] [-<option>D
+        </option><replaceable>directory</replaceable> ] [
+        <replaceable>chain</replaceable>... ]</term>
+
+        <listitem>
+          <para>Not available with Shorewall[6]-lite.</para>
+
+          <para>All steps performed by <command>restart</command> are
+          performed by <command>refresh</command> with the exception that
+          <command>refresh</command> only recreates the chains specified in
+          the command while <command>restart</command> recreates the entire
+          Netfilter ruleset. If no <replaceable>chain</replaceable> is given,
+          the static blacklisting chain <emphasis
+          role="bold">blacklst</emphasis> is assumed.</para>
+
+          <para>The listed chains are assumed to be in the filter table. You
+          can refresh chains in other tables by prefixing the chain name with
+          the table name followed by ":" (e.g., nat:net_dnat). Chain names
+          which follow are assumed to be in that table until the end of the
+          list or until an entry in the list names another table. Built-in
+          chains such as FORWARD may not be refreshed.</para>
+
+          <para>The <option>-n</option> option was added in Shorewall 4.5.3
+          causes Shorewall to avoid updating the routing table(s).</para>
+
+          <para>The <option>-d</option> option was added in Shorewall 4.5.3
+          causes the compiler to run under the Perl debugger.</para>
+
+          <para>The <option>-T</option> option was added in Shorewall 4.5.3
+          and causes a Perl stack trace to be included with each
+          compiler-generated error and warning message.</para>
+
+          <para>The <option>-i</option> option was added in Shorewall 4.6.0
+          and causes a warning message to be issued if the current line
+          contains alternative input specifications following a semicolon
+          (";"). Such lines will be handled incorrectly if INLINE_MATCHES is
+          set to Yes in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
+
+          <para>The <option>-D</option> option was added in Shorewall 4.5.3
+          and causes Shorewall to look in the given
+          <emphasis>directory</emphasis> first for configuration files.</para>
+
+          <para>Example:<programlisting><command>shorewall refresh net2fw nat:net_dnat</command> #Refresh the 'net2loc' chain in the filter table and the 'net_dnat' chain in the nat table</programlisting></para>
+
+          <para>The <emphasis role="bold">refresh</emphasis> command has
+          slightly different behavior. When no chain name is given to the
+          <emphasis role="bold">refresh</emphasis> command, the mangle table
+          is refreshed along with the blacklist chain (if any). This allows
+          you to modify <filename>/etc/shorewall/tcrules </filename>and
+          install the changes using <emphasis
+          role="bold">refresh</emphasis>.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">reject</emphasis><replaceable>
         address</replaceable></term>
@@ -1918,57 +1941,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term><emphasis role="bold">remote-getcaps</emphasis>
-        [-<option>R</option>] [-<option>r</option>
-        <replaceable>root-user-name</replaceable>] [ [ -D ]
-        <replaceable>directory</replaceable> ] [
-        <replaceable>system</replaceable> ]</term>
-
-        <listitem>
-          <para>Added in Shoreall 5.2.0, this command executes <emphasis
-          role="bold">shorewall[6]-lite show capabilities -f &gt;
-          /var/lib/shorewall[6]-lite/capabilities</emphasis> on the remote
-          <replaceable>system</replaceable> via ssh then the generated file is
-          copied to <replaceable>directory</replaceable> on the local system.
-          If no <replaceable>directory</replaceable> is given, the current
-          working directory is assumed.</para>
-
-          <para>if <emphasis role="bold">-R</emphasis> is included, the remote
-          shorewallrc file is also copied to
-          <replaceable>directory</replaceable>.</para>
-
-          <para>If <option>-r</option> is included, it specifies that the root
-          user on <replaceable>system</replaceable> is named
-          <replaceable>root-user-name</replaceable> rather than "root".</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">remote-getrc</emphasis>
-        [-<option>c</option>] [-<option>r</option>
-        <replaceable>root-user-name</replaceable>] [ [ -D ]
-        <replaceable>directory</replaceable> ] [
-        <replaceable>system</replaceable> ]</term>
-
-        <listitem>
-          <para>Added in Shoreall 5.2.0, this command copies the shorewallrc
-          file from the remote <replaceable>system</replaceable> to
-          <replaceable>directory</replaceable> on the local system. If no
-          <replaceable>directory</replaceable> is given, the current working
-          directory is assumed.</para>
-
-          <para>if <emphasis role="bold">-c</emphasis> is included, the remote
-          capabilities are also copied to
-          <replaceable>directory</replaceable>, as is done by the
-          <command>remote-getcaps</command> command.</para>
-
-          <para>If <option>-r</option> is included, it specifies that the root
-          user on <replaceable>system</replaceable> is named
-          <replaceable>root-user-name</replaceable> rather than "root".</para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term><emphasis role="bold">remote-start</emphasis>
         [-<option>n</option>] [-<option>s</option>] [-<option>c</option>]
@@ -2020,9 +1992,9 @@
           role="bold">shorewall-lite save</emphasis> via ssh.</para>
 
           <para>if <emphasis role="bold">-c</emphasis> is included, the
-          command <emphasis role="bold">shorewall[6]-lite show capabilities -f
-          &gt; /var/lib/shorewall[6]-lite/capabilities</emphasis> is executed
-          via ssh then the generated file is copied to
+          command <emphasis role="bold">shorewall-lite show capabilities -f
+          &gt; /var/lib/shorewall-lite/capabilities</emphasis> is executed via
+          ssh then the generated file is copied to
           <replaceable>directory</replaceable> using scp. This step is
           performed before the configuration is compiled.</para>
 
@@ -2033,6 +2005,13 @@
           <para>The <option>-T</option> option was added in Shorewall 4.5.3
           and causes a Perl stack trace to be included with each
           compiler-generated error and warning message.</para>
+
+          <para>The <option>-i</option> option was added in Shorewall 4.6.0
+          and causes a warning message to be issued if the current line
+          contains alternative input specifications following a semicolon
+          (";"). Such lines will be handled incorrectly if INLINE_MATCHES is
+          set to Yes in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
         </listitem>
       </varlistentry>
 
@@ -2451,11 +2430,11 @@
         <replaceable>filename</replaceable> ]</term>
 
         <listitem>
-          <para>Creates a snapshot of the currently running firewall. The
-          dynamic blacklist is stored in /var/lib/shorewall/save. The state of
-          the firewall is stored in
+          <para>The dynamic blacklist is stored in /var/lib/shorewall/save.
+          The state of the firewall is stored in
           /var/lib/shorewall/<emphasis>filename</emphasis> for use by the
-          <emphasis role="bold">shorewall restore</emphasis> command. If
+          <emphasis role="bold">shorewall restore</emphasis> and <emphasis
+          role="bold">shorewall -f start</emphasis> commands. If
           <emphasis>filename</emphasis> is not given then the state is saved
           in the file specified by the RESTOREFILE option in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
@@ -2758,15 +2737,6 @@
               </listitem>
             </varlistentry>
 
-            <varlistentry>
-              <term><emphasis role="bold">rc</emphasis></term>
-
-              <listitem>
-                <para>Added in Shorewall 5.2.0. Displays the contents of
-                $SHAREDIR/shorewall/shorewallrc.</para>
-              </listitem>
-            </varlistentry>
-
             <varlistentry>
               <term>[-<option>c</option>]<emphasis role="bold">
               routing</emphasis></term>
@@ -2792,20 +2762,6 @@
               </listitem>
             </varlistentry>
 
-            <varlistentry>
-              <term>saves</term>
-
-              <listitem>
-                <para>Added in Shorewall 5.2.0. Lists snapshots created by the
-                <command>save</command> command. Each snapshot is listed with
-                the date and time when it was taken. If there is a snapshot
-                with the name specified in the RESTOREFILE option in <ulink
-                url="shorewall.conf.html">shorewall.conf(5</ulink>), that
-                snapshot is listed as the <emphasis>default</emphasis>
-                snapshot for the <command>restore</command> command.</para>
-              </listitem>
-            </varlistentry>
-
             <varlistentry>
               <term><emphasis role="bold">tc</emphasis></term>
 
@@ -2965,7 +2921,7 @@
           by the compiled script that executed the last successful <emphasis
           role="bold">start</emphasis>, <emphasis
           role="bold">restart</emphasis> or <emphasis
-          role="bold">reload</emphasis> command if that script exists.</para>
+          role="bold">refresh</emphasis> command if that script exists.</para>
         </listitem>
       </varlistentry>
 
@@ -3216,38 +3172,23 @@
   <refsect1>
     <title>FILES</title>
 
-    <para>/etc/shorewall/*</para>
-
-    <para>/etc/shorewall6/*</para>
+    <para>/etc/shorewall/</para>
   </refsect1>
 
   <refsect1>
     <title>See ALSO</title>
 
-    <simplelist>
-      <member><ulink
-      url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink>
-      - Describes operational aspects of Shorewall.</member>
+    <para><ulink
+    url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>
 
-      <member><ulink url="shorewall-files.html">shorewall-files(5)</ulink> -
-      Describes the various configuration files along with features and
-      conventions common to those files.</member>
-
-      <member><ulink url="shorewall-names.html">shorewall-names(5)</ulink> -
-      Describes naming of objects within a Shorewall configuration.</member>
-
-      <member><ulink
-      url="shorewall-addresses.html">shorewall-addresses(5)</ulink> -
-      Describes how to specify addresses within a Shorewall
-      configuration.</member>
-
-      <member><ulink
-      url="shorewall-exclusion.html">shorewall-exclusion(5)</ulink> -
-      Describes how to exclude certain hosts and/or networks from matching a
-      rule.</member>
-
-      <member><ulink url="shorewall-nesting.html">shorewall-nesting(5)</ulink>
-      - Describes how to nest one Shorewall zone inside another.</member>
-    </simplelist>
+    <para>shorewall-accounting(5), shorewall-actions(5),
+    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
+    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
+    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
+    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
+    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
+    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
+    shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5),
+    shorewall-tunnels(5), shorewall-zones(5)</para>
   </refsect1>
 </refentry>

Shorewall-core/shorewall

@@ -1,8 +1,8 @@
 #!/bin/sh
 #
-#     Shorewall Packet Filtering Firewall Control Program - V5.2
+#     Shorewall Packet Filtering Firewall Control Program - V5.0
 #
-#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015-2017
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015 -
 #         Tom Eastep (teastep@shorewall.net)
 #
 #	Shorewall documentation is available at http://www.shorewall.net
@@ -25,10 +25,6 @@
 #       For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
 #
 ################################################################################################
-#
-# Default product is Shorewall. PRODUCT will be set based on $0 and on passed -[46] and -l
-# options
-#
 PRODUCT=shorewall
 
 #

Shorewall-core/shorewallrc.alt

@@ -1,25 +0,0 @@
-#
-# ALT/BaseALT/ALTLinux Shorewall 5.2 rc file
-#
-BUILD=                                  #Default is to detect the build system
-HOST=alt
-PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
-SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
-LIBEXECDIR=${PREFIX}/libexec            #Directory for executable scripts.
-PERLLIBDIR=${SHAREDIR}/perl5            #Directory to install Shorewall Perl module directory
-CONFDIR=/etc                            #Directory where subsystem configurations are installed
-SBINDIR=/sbin                           #Directory where system administration programs are installed
-MANDIR=${SHAREDIR}/man                  #Directory where manpages are installed.
-INITDIR=${CONFDIR}/rc.d/init.d          #Directory where SysV init scripts are installed.
-INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
-INITSOURCE=init.alt.sh                  #Name of the distributed file to be installed as the SysV init script
-ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
-SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed as $SYSCONFDIR/$PRODUCT
-SERVICEFILE=                            #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
-SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter files are installed
-SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
-SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
-VARLIB=/var/lib                         #Directory where product variable data is stored.
-VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
-DEFAULT_PAGER=/usr/bin/less             #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.apple

@@ -1,5 +1,5 @@
 #
-# Apple OS X Shorewall 5.2 rc file
+# Apple OS X Shorewall 5.0 rc file
 #
 BUILD=apple
 HOST=apple

Shorewall-core/shorewallrc.archlinux

@@ -1,5 +1,5 @@
 #
-# Arch Linux Shorewall 5.2 rc file
+# Arch Linux Shorewall 5.0 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=archlinux

Shorewall-core/shorewallrc.cygwin

@@ -1,5 +1,5 @@
 #
-# Cygwin Shorewall 5.2 rc file
+# Cygwin Shorewall 5.0 rc file
 #
 BUILD=cygwin
 HOST=cygwin

Shorewall-core/shorewallrc.debian.systemd

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.2 rc file
+# Debian Shorewall 5.0 rc file
 #
 BUILD=					#Default is to detect the build system
 HOST=debian
@@ -13,9 +13,9 @@ MANDIR=${PREFIX}/share/man		#Directory where manpages are installed.
 INITDIR=				#Directory where SysV init scripts are installed.
 INITFILE=				#Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
-ANNOTATED=				#If non-empty, annotated configuration files are installed
-SYSCONFFILE=default.debian.systemd	#Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEFILE=$PRODUCT.service.debian	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+ANNOTATED=				#If non-zero, annotated configuration files are installed
+SYSCONFFILE=default.debian.systemd		#Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
 SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR

Shorewall-core/shorewallrc.debian.sysvinit

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.2 rc file
+# Debian Shorewall 5.0 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=debian

Shorewall-core/shorewallrc.default

@@ -1,5 +1,5 @@
 #
-# Default Shorewall 5.2 rc file
+# Default Shorewall 5.0 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=linux                              #Generic Linux

Shorewall-core/shorewallrc.openwrt

@@ -1,5 +1,5 @@
 #
-# OpenWRT/LEDE Shorewall 5.2 rc file
+# OpenWRT Shorewall 5.0 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=openwrt

Shorewall-core/shorewallrc.redhat

@@ -1,5 +1,5 @@
 #
-# RedHat/FedoraShorewall 5.2 rc file
+# RedHat/FedoraShorewall 5.0 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=redhat

Shorewall-core/shorewallrc.sandbox

@@ -1,28 +0,0 @@
-#
-# Shorewall 5.2 rc file for installing into a Sandbox
-#
-BUILD=                                       # Default is to detect the build system
-HOST=linux
-INSTALLDIR=				     # Set this to the directory where you want Shorewall installed
-PREFIX=${INSTALLDIR}/usr		     # Top-level directory for shared files, libraries, etc.
-SHAREDIR=${PREFIX}/share		     # Directory for arch-neutral files.
-LIBEXECDIR=${PREFIX}/share		     # Directory for executable scripts.	
-PERLLIBDIR=${PREFIX}/share/shorewall	     # Directory to install Shorewall Perl module directory	
-CONFDIR=${INSTALLDIR}/etc		     # Directory where subsystem configurations are installed				
-SBINDIR=${INSTALLDIR}/sbin		     # Directory where system administration programs are installed			
-MANDIR=		     			     # Leave empty
-INITDIR=				     # Leave empty				     				
-INITSOURCE=				     # Leave empty
-INITFILE=				     # Leave empty
-AUXINITSOURCE=				     # Leave empty
-AUXINITFILE=				     # Leave empty
-SERVICEDIR=				     # Leave empty
-SERVICEFILE=    			     # Leave empty
-SYSCONFFILE=				     # Leave empty
-SYSCONFDIR=				     # Leave empty			
-SPARSE=					     # Leave empty			
-ANNOTATED=				     # If non-empty, annotated configuration files are installed				
-VARLIB=${INSTALLDIR}/var/lib		     # Directory where product variable data is stored.				
-VARDIR=${VARLIB}/$PRODUCT		     # Directory where product variable data is stored.		
-DEFAULT_PAGER=/usr/bin/less		     # Pager to use if none specified in shorewall[6].conf
-SANDBOX=Yes				     # Indicates SANDBOX installation

Shorewall-core/shorewallrc.slackware

@@ -1,5 +1,5 @@
 #
-# Slackware Shorewall 5.2 rc file
+# Slackware Shorewall 5.0 rc file
 #
 BUILD=slackware
 HOST=slackware

Shorewall-core/shorewallrc.suse

@@ -1,5 +1,5 @@
 #
-# SuSE Shorewall 5.2 rc file
+# SuSE Shorewall 5.0 rc file
 #
 BUILD=                                                #Default is to detect the build system
 HOST=suse

Shorewall-core/wait4ifup

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     Shorewall interface helper utility - V5.2
+#     Shorewall interface helper utility - V4.2
 #
 #     (c) 2007,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-init/init.alt.sh

@@ -1,150 +0,0 @@
-#!/bin/sh
-#
-# Shorewall init script
-#
-# chkconfig: - 09 91
-# description: Initialize the shorewall firewall at boot time
-#
-### BEGIN INIT INFO
-# Provides: shorewall-init
-# Required-Start: $local_fs
-# Required-Stop: $local_fs
-# Default-Start: 3 4 5
-# Default-Stop:  0 1 2 6
-# Short-Description: Initialize the shorewall firewall at boot time
-# Description:       Place the firewall in a safe state at boot time
-#                    prior to bringing up the network.
-### END INIT INFO
-
-# Do not load RH compatibility interface.
-WITHOUT_RC_COMPAT=1
-
-# Source function library.
-. /etc/init.d/functions
-
-#
-# The installer may alter this
-#
-. /usr/share/shorewall/shorewallrc
-NAME="Shorewall-init firewall"
-PROG="shorewall-init"
-SHOREWALL="$SBINDIR/$PROG"
-LOGGER="logger -i -t $PROG"
-
-# Get startup options (override default)
-OPTIONS=
-
-LOCKFILE=/var/lock/subsys/shorewall-init
-
-# check if shorewall-init is configured or not
-if [ -f "/etc/sysconfig/shorewall-init" ]; then
-	. /etc/sysconfig/shorewall-init
-	if [ -z "$PRODUCTS" ]; then
-		echo "No PRODUCTS configured"
-		exit 6
-	fi
-else
-	echo "/etc/sysconfig/shorewall-init not found"
-	exit 6
-fi
-
-RETVAL=0
-
-# set the STATEDIR variable
-setstatedir() {
-	local statedir
-	if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
-		statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
-	fi
-
-	[ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
-
-	if [ -x ${STATEDIR}/firewall ]; then
-		return 0
-	elif [ $PRODUCT = shorewall ]; then
-		${SBINDIR}/shorewall compile
-	elif [ $PRODUCT = shorewall6 ]; then
-		${SBINDIR}/shorewall -6 compile
-	else
-		return 1
-	fi
-}
-
-start() {
-	local PRODUCT
-	local STATEDIR
-
-	printf "Initializing \"Shorewall-based firewalls\": "
-
-	for PRODUCT in $PRODUCTS; do
-		if setstatedir; then
-			$STATEDIR/$PRODUCT/firewall ${OPTIONS} stop 2>&1 | "$LOGGER"
-			RETVAL=$?
-		else
-			RETVAL=6
-			break
-		fi
-	done
-
-	if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
-		ipset -R < "$SAVE_IPSETS"
-	fi
-
-	[ $RETVAL -eq 0 ] && touch "$LOCKFILE"
-	return $RETVAL
-}
-
-stop() {
-	local PRODUCT
-	local STATEDIR
-
-	printf "Clearing \"Shorewall-based firewalls\": "
-	for PRODUCT in $PRODUCTS; do
-		if setstatedir; then
-			${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | "$LOGGER"
-			RETVAL=$?
-		else
-			RETVAL=6
-			break
-		fi
-	done
-
-	if [ -n "$SAVE_IPSETS" ]; then
-		mkdir -p $(dirname "$SAVE_IPSETS")
-		if ipset -S > "${SAVE_IPSETS}.tmp"; then
-			grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-		else
-			rm -f "${SAVE_IPSETS}.tmp"
-		fi
-	fi
-
-	[ $RETVAL -eq 0 ] && rm -f "$LOCKFILE"
-	return $RETVAL
-}
-
-# See how we were called.
-case "$1" in
-	start)
-	    start
-	    ;;
-	stop)
-	    stop
-	    ;;
-	restart|reload|condrestart|condreload)
-	    # "Not implemented"
-	    ;;
-	condstop)
-	    if [ -e "$LOCKFILE" ]; then
-		stop
-	    fi
-	    ;;
-	status)
-	    status "$PROG"
-	     RETVAL=$?
-	    ;;
-	*)
-	    echo $"Usage: ${0##*/}  {start|stop|restart|reload|condrestart|condstop|status}"
-	    RETVAL=1
-esac
-
-exit $RETVAL

Shorewall-init/init.debian.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -73,16 +73,12 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-        return 0
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
     else
-        if [ $PRODUCT = shorewall ]; then
-            ${SBINDIR}/shorewall compile
-        elif [ $PRODUCT = shorewall6 ]; then
-            ${SBINDIR}/shorewall -6 compile
-        else
-            return 1
-        fi
+	return 0
     fi
 }
 
@@ -112,14 +108,16 @@ shorewall_start () {
 
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-          #
-	  # Run in a sub-shell to avoid name collisions
-	  #
-	  (
-	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop
-	      fi
-	  )
+	  if [ -x ${STATEDIR}/firewall ]; then
+              #
+	      # Run in a sub-shell to avoid name collisions
+	      #
+	      (
+		  if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		      ${STATEDIR}/firewall ${OPTIONS} stop
+		  fi
+	      )
+	  fi
       fi
   done
 
@@ -147,7 +145,9 @@ shorewall_stop () {
   printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
       fi
   done
 
@@ -159,9 +159,8 @@ shorewall_stop () {
 
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
       else
-	  rm -f "${SAVE_IPSETS}.tmp"
 	  echo_notdone
       fi
 

Shorewall-init/init.fedora.sh

@@ -44,14 +44,12 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-	return 0
-    elif [ $PRODUCT = shorewall ]; then
+    if [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
     else
-	return 1
+	return 0
     fi
 }
 
@@ -68,20 +66,20 @@ start () {
 
     printf "Initializing \"Shorewall-based firewalls\": "
 
-    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
-	ipset -R < "$SAVE_IPSETS"
-    fi
-
     for PRODUCT in $PRODUCTS; do
 	setstatedir
 	retval=$?
 
 	if [ $retval -eq 0 ]; then
-	    ${STATEDIR}/firewall ${OPTIONS} stop 2>&1 | $logger
-	    retval=${PIPESTATUS[0]}
-	    [ $retval -ne 0 ] && break
+	    if [ -x "${STATEDIR}/firewall" ]; then
+		${STATEDIR}/firewall ${OPTIONS} stop 2>&1 | $logger
+		retval=${PIPESTATUS[0]}
+		[ $retval -ne 0 ] && break
+	    else
+		retval=6 #Product not configured
+		break
+	    fi
 	else
-	    retval=6 #Product not configured
 	    break
 	fi
     done
@@ -108,25 +106,20 @@ stop () {
 	retval=$?
 
 	if [ $retval -eq 0 ]; then
-	    ${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | $logger
-	    retval=${PIPESTATUS[0]}
-	    [ $retval -ne 0 ] && break
+	    if [ -x "${STATEDIR}/firewall" ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | $logger
+		retval=${PIPESTATUS[0]}
+		[ $retval -ne 0 ] && break
+	    else
+		retval=6 #Product not configured
+		break
+	    fi
 	else
-	    retval=6 #Product not configured
 	    break
 	fi
     done
 
     if [ $retval -eq 0 ]; then
-	if [ -n "$SAVE_IPSETS" ]; then
-	    mkdir -p $(dirname "$SAVE_IPSETS")
-	    if ipset -S > "${SAVE_IPSETS}.tmp"; then
-		grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-	    else
-		rm -f "${SAVE_IPSETS}.tmp"
-	    fi
-	fi
-
 	rm -f $lockfile
 	success
     else

Shorewall-init/init.openwrt.sh

@@ -1,5 +1,5 @@
 #!/bin/sh /etc/rc.common
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)
@@ -75,14 +75,12 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-	return 0
-    elif [ $PRODUCT = shorewall ]; then
+    if [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
     else
-	return 1
+	return 0
     fi
 }
 
@@ -94,8 +92,10 @@ start () {
   printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      ${STATEDIR}/firewall ${OPTIONS} stop
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
 	  fi
       fi
   done
@@ -103,8 +103,6 @@ start () {
   if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
       ipset -R < "$SAVE_IPSETS"
   fi
-
-  return 0
 }
 
 boot () {
@@ -119,19 +117,17 @@ stop () {
     printf "Clearing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    ${STATEDIR}/firewall ${OPTIONS} clear
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
 	fi
     done
 
     if [ -n "$SAVE_IPSETS" ]; then
 	mkdir -p $(dirname "$SAVE_IPSETS")
 	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-	else
-	    rm -f "${SAVE_IPSETS}.tmp"
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
 	fi
     fi
-
-    return 0
 }
 

Shorewall-init/init.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -69,12 +69,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-	return 0
-    elif [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
     else
-	return 1
+	return 0
     fi
 }
 
@@ -86,8 +84,10 @@ shorewall_start () {
   printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      ${STATEDIR}/firewall ${OPTIONS} stop
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
 	  fi
       fi
   done
@@ -107,16 +107,16 @@ shorewall_stop () {
   printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
       fi
   done
 
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-      else
-	  rm -f "${SAVE_IPSETS}.tmp"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
       fi
   fi
 

Shorewall-init/init.suse.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -79,14 +79,12 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-	return 0
-    elif [ $PRODUCT = shorewall ]; then
+    if [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
     else
-	return 6
+	return 0
     fi
 }
 
@@ -98,8 +96,10 @@ shorewall_start () {
   printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
+	  if [ -x $STATEDIR/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
+	      fi
 	  fi
       fi
   done
@@ -117,16 +117,16 @@ shorewall_stop () {
   printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
       fi
   done
 
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-      else
-	  rm -f "${SAVE_IPSETS}.tmp"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
       fi
   fi
 }

Shorewall-init/install.sh

@@ -181,9 +181,6 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
-		    alt|basealt|altlinux)
-			BUILD=alt
-			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -194,8 +191,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
-	    elif [ -f /etc/altlinux-release ]; then
-		BUILD=alt
 	    elif [ -f /etc/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f /etc/SuSE-release ]; then
@@ -258,9 +253,6 @@ case "$HOST" in
     openwrt)
 	echo "Installing Openwrt-specific configuration..."
 	;;
-    alt)
-	echo "Installing ALT-specific configuration...";
-	;;
     linux)
 	fatal_error "Shorewall-init is not supported on this system"
 	;;

Shorewall-init/shorewall-init

@@ -1,5 +1,5 @@
 #!/bin/bash
-#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #	(c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -33,12 +33,12 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-        return 0
-    elif [ $PRODUCT = shorewall ]; then
+    if [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
+    else
+	return 0
     fi
 }
 
@@ -67,14 +67,16 @@ shorewall_start () {
     printf "Initializing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    #
-	    # Run in a sub-shell to avoid name collisions
-	    #
-	    (
-		if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		    ${STATEDIR}/firewall ${OPTIONS} stop
-		fi
-	    )
+	    if [ -x ${STATEDIR}/firewall ]; then
+		#
+		# Run in a sub-shell to avoid name collisions
+		#
+		(
+		    if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+			${STATEDIR}/firewall ${OPTIONS} stop
+		    fi
+		)
+	    fi
 	fi
     done
 
@@ -93,16 +95,16 @@ shorewall_stop () {
     printf "Clearing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    ${STATEDIR}/firewall ${OPTIONS} clear
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
 	fi
     done
 
     if [ -n "$SAVE_IPSETS" ]; then
 	mkdir -p $(dirname "$SAVE_IPSETS")
 	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-	else
-	    rm -f "${SAVE_IPSETS}.tmp"
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
 	fi
     fi
 

Shorewall-lite/init.alt.sh

@@ -1,117 +0,0 @@
-#!/bin/sh
-#
-# Shorewall-Lite init script
-#
-# chkconfig: - 28 90
-# description: Packet filtering firewall
-#
-### BEGIN INIT INFO
-# Provides: shorewall-lite
-# Required-Start: $local_fs $remote_fs $syslog $network
-# Should-Start: $time $named
-# Required-Stop:
-# Default-Start: 3 4 5
-# Default-Stop:  0 1 2 6
-# Short-Description: Packet filtering firewall
-# Description: The Shoreline Firewall, more commonly known as "Shorewall", is a
-#              Netfilter (iptables) based firewall
-### END INIT INFO
-
-# Do not load RH compatibility interface.
-WITHOUT_RC_COMPAT=1
-
-# Source function library.
-. /etc/init.d/functions
-
-#
-# The installer may alter this
-#
-. /usr/share/shorewall/shorewallrc
-
-NAME="Shorewall-Lite firewall"
-PROG="shorewall"
-SHOREWALL="$SBINDIR/$PROG -l"
-LOGGER="logger -i -t $PROG"
-
-# Get startup options (override default)
-OPTIONS=
-
-SourceIfNotEmpty $SYSCONFDIR/${PROG}-lite
-
-LOCKFILE="/var/lock/subsys/${PROG}-lite"
-RETVAL=0
-
-start() {
-	action $"Applying $NAME rules:" "$SHOREWALL" "$OPTIONS" start "$STARTOPTIONS" 2>&1 | "$LOGGER"
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch "$LOCKFILE"
-	return $RETVAL
-}
-
-stop() {
-	action $"Stoping $NAME :" "$SHOREWALL" "$OPTIONS" stop "$STOPOPTIONS" 2>&1 | "$LOGGER"
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f "$LOCKFILE"
-	return $RETVAL
-}
-
-restart() {
-	action $"Restarting $NAME rules: " "$SHOREWALL" "$OPTIONS" restart "$RESTARTOPTIONS" 2>&1 | "$LOGGER"
-	RETVAL=$?
-	return $RETVAL
-}
-
-reload() {
-	action $"Reloadinging $NAME rules: " "$SHOREWALL" "$OPTIONS" reload "$RELOADOPTIONS" 2>&1 | "$LOGGER"
-	RETVAL=$?
-	return $RETVAL
-}
-
-clear() {
-	action $"Clearing $NAME rules: " "$SHOREWALL" "$OPTIONS" clear 2>&1 | "$LOGGER"
-	RETVAL=$?
-	return $RETVAL
-}
-
-# See how we were called.
-case "$1" in
-	start)
-	    start
-	    ;;
-	stop)
-	    stop
-	    ;;
-	restart)
-	    restart
-	    ;;
-	reload)
-	    reload
-	    ;;
-	clear)
-	    clear
-	    ;;
-	condrestart)
-	    if [ -e "$LOCKFILE" ]; then
-		restart
-	    fi
-	    ;;
-	condreload)
-	    if [ -e "$LOCKFILE" ]; then
-		restart
-	    fi
-	    ;;
-	condstop)
-	    if [ -e "$LOCKFILE" ]; then
-		stop
-	    fi
-	    ;;
-	status)
-	    "$SHOREWALL" status
-	     RETVAL=$?
-	    ;;
-	*)
-	    echo $"Usage: ${0##*/}  {start|stop|restart|reload|clear|condrestart|condstop|status}"
-	    RETVAL=1
-esac
-
-exit $RETVAL

Shorewall-lite/init.openwrt.sh

@@ -1,6 +1,6 @@
 #!/bin/sh /etc/rc.common
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)

Shorewall-lite/init.sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 RCDLINKS="2,S41 3,S41 6,K41"
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-lite/init.suse.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall-lite/install.sh

@@ -190,9 +190,6 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
-		    alt|basealt|altlinux)
-			BUILD=alt
-			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -201,8 +198,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
-	    elif [ -f /etc/altlinux-release ]; then
-		BUILD=alt
 	    elif [ -f ${CONFDIR}/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f ${CONFDIR}/SuSE-release ]; then
@@ -271,9 +266,6 @@ case "$HOST" in
     openwrt)
 	echo "Installing OpenWRT-specific configuration..."
 	;;
-    alt)
-	echo "Installing ALT-specific configuration...";
-	;;
     linux)
 	;;
     *)
@@ -426,11 +418,6 @@ echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shor
 if [ -f modules ]; then
     install_file modules ${DESTDIR}${SHAREDIR}/$PRODUCT/modules 0600
     echo "Modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/modules"
-
-    for f in modules.*; do
-	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-	echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
-    done
 fi
 
 if [ -f helpers ]; then
@@ -438,6 +425,11 @@ if [ -f helpers ]; then
     echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
 fi
 
+for f in modules.*; do
+    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+    echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+done
+
 #
 # Install the Man Pages
 #

Shorewall-lite/lib.base

@@ -1,5 +1,5 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall-lite/lib.base
+# Shorewall 4.4 -- /usr/share/shorewall-lite/lib.base
 #
 #     (c) 2011,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-lite/shorecap

@@ -28,7 +28,7 @@
 #
 #   On the target system (the system where the firewall program is to run):
 #
-#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] shorecap > capabilities
+#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] [ MODULE_SUFFIX="<module suffix list>" ] shorecap > capabilities
 #
 #    Now move the capabilities file to the compilation system. The file must
 #    be placed in a directory on the CONFIG_PATH to be used when compiling firewalls
@@ -38,6 +38,7 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
+#        MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not

Shorewall-lite/uninstall.sh

@@ -151,7 +151,7 @@ fi
 
 remove_file ${SBINDIR}/$PRODUCT
 
-if [ -h ${SHAREDIR}/$PRODUCT/init ]; then
+if [ -L ${SHAREDIR}/$PRODUCT/init ]; then
     if [ $HOST = openwrt ]; then
 	if [ $configure -eq 1 ] && /etc/init.d/$PRODUCT enabled; then
 	    /etc/init.d/$PRODUCT disable

Shorewall/Actions/action.A_Drop.deprecated

@@ -0,0 +1,56 @@
+#
+# Shorewall -- /usr/share/shorewall/action.A_Drop
+#
+# The audited default DROP common rules
+#
+# This action is invoked before a DROP policy is enforced. The purpose
+# of the action is:
+#
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
+#
+# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
+#
+?require AUDIT_TARGET
+###############################################################################
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
+#
+# Count packets that come through here
+#
+COUNT
+#
+# Special Handling for Auth
+#
+Auth(A_DROP)
+#
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before broadcast Drop.
+#
+A_AllowICMPs	-	-	icmp
+#
+# Don't log broadcasts and multicasts
+#
+dropBcast(audit)
+dropMcast(audit)
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log.
+#
+dropInvalid(audit)
+#
+# Drop Microsoft noise so that it doesn't clutter up the log.
+#
+SMB(A_DROP)
+A_DropUPnP
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+dropNotSyn(audit)	-	-	tcp
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+A_DropDNSrep

Shorewall/Actions/action.A_REJECT

@@ -1,11 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/action.A_REJECT
+# Shorewall -- /usr/share/shorewall/action.A_REJECTWITH
 #
 # A_REJECT Action.
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.A_REJECT!

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.A_Reject.deprecated

@@ -0,0 +1,52 @@
+#
+# Shorewall -- /usr/share/shorewall/action.A_Reject
+#
+# The audited default REJECT action common rules
+#
+# This action is invoked before a REJECT policy is enforced. The purpose
+# of the action is:
+#
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
+#
+# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
+###############################################################################
+#ACTION		SOURCE	DEST	PROTO
+#
+# Count packets that come through here
+#
+COUNT
+#
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before broadcast Drop.
+#
+A_AllowICMPs	-	-	icmp
+#
+# Drop Broadcasts and multicasts so they don't clutter up the log
+# (these must *not* be rejected).
+#
+dropBcast(audit)
+dropMcast(audit)
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log (these ICMPs cannot be
+# rejected).
+#
+dropInvalid(audit)
+#
+# Reject Microsoft noise so that it doesn't clutter up the log.
+#
+SMB(A_REJECT)
+A_DropUPnP
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+dropNotSyn(audit)	-	-	tcp
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+A_DropDNSrep

Shorewall/Actions/action.AllowICMPs

@@ -7,38 +7,5 @@
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
 DEFAULTS ACCEPT
-
-?if __IPV4
-    @1	-	-	icmp	fragmentation-needed	{comment="Needed ICMP types"}
-    @1	-	-	icmp	time-exceeded		{comment="Needed ICMP types"}
-?else
-?COMMENT Needed ICMP types (RFC4890)
-    @1	-		-	ipv6-icmp	destination-unreachable
-    @1	-		-	ipv6-icmp	packet-too-big
-    @1	-		-	ipv6-icmp	time-exceeded
-    @1	-		-	ipv6-icmp	parameter-problem
-
-# The following should have a ttl of 255 and must be allowed to transit a bridge
-    @1	-		-	ipv6-icmp	router-solicitation
-    @1	-		-	ipv6-icmp	router-advertisement
-    @1	-		-	ipv6-icmp	neighbour-solicitation
-    @1	-		-	ipv6-icmp	neighbour-advertisement
-    @1	-		-	ipv6-icmp	137	# Redirect
-    @1	-		-	ipv6-icmp	141	# Inverse neighbour discovery solicitation
-    @1	-		-	ipv6-icmp	142	# Inverse neighbour discovery advertisement
-
-# The following should have a link local source address and must be allowed to transit a bridge
-    @1	fe80::/10	-	ipv6-icmp	130	# Listener query
-    @1	fe80::/10	-	ipv6-icmp	131	# Listener report
-    @1	fe80::/10	-	ipv6-icmp	132	# Listener done
-    @1	fe80::/10	-	ipv6-icmp	143	# Listener report v2
-
-# The following should be received with a ttl of 255 and must be allowed to transit a bridge
-    @1	-		-	ipv6-icmp	148	# Certificate path solicitation
-    @1	-		-	ipv6-icmp	149	# Certificate path advertisement
-
-# The following should have a link local source address and a ttl of 1 and must be allowed to transit a bridge
-    @1	fe80::/10	-	ipv6-icmp	151	# Multicast router advertisement
-    @1	fe80::/10	-	ipv6-icmp	152	# Multicast router solicitation
-    @1	fe80::/10	-	ipv6-icmp	153	# Multicast router termination
-?endif
+@1	-	-	icmp	fragmentation-needed	{comment="Needed ICMP types"}
+@1	-	-	icmp	time-exceeded		{comment="Needed ICMP types"}

Shorewall/Actions/action.Broadcast

@@ -3,7 +3,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #
@@ -20,7 +20,7 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-# Broadcast[([<action>|[,{audit|-}])]
+# Broadcast[([<action>|-[,{audit|-}])]
 #
 # Default action is DROP
 #
@@ -29,37 +29,27 @@
 DEFAULTS DROP,-
 
 ?if __ADDRTYPE
-    @1	-	-	-	;; -m addrtype --dst-type BROADCAST
-    @1	-	-	-	;; -m addrtype --dst-type ANYCAST
+@1	-	-	-	;; -m addrtype --dst-type BROADCAST
+@1	-	-	-	;; -m addrtype --dst-type ANYCAST
 ?else
-    ?begin perl;
+?begin perl;
 
-    use strict;
-    use Shorewall::IPAddrs;
-    use Shorewall::Config;
-    use Shorewall::Chains;
+use Shorewall::IPAddrs;
+use Shorewall::Config;
+use Shorewall::Chains;
 
-    my ( $action, $audit ) = get_action_params( 2 );
-    my $chainref           = get_action_chain;
-    my ( $level, $tag )    = get_action_logging;
+my ( $action )         = get_action_params( 1 );
+my $chainref           = get_action_chain;
+my ( $level, $tag )    = get_action_logging;
 
-    fatal_error "Invalid parameter to action Broadcast" if supplied $audit && $audit ne 'audit';
+add_commands $chainref, 'for address in $ALL_BCASTS; do';
+incr_cmd_level $chainref;
+log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
+add_jump $chainref, $action, 0, "-d \$address ";
+decr_cmd_level $chainref;
+add_commands $chainref, 'done';
 
-    my $target             = require_audit ( $action , $audit );
+1;
 
-    if ( $family == F_IPV4 ) {
-        add_commands $chainref, 'for address in $ALL_BCASTS; do';
-    } elsif ($family == F_IPV6 ) {
-        add_commands $chainref, 'for address in $ALL_ACASTS; do';
-    }
-
-    incr_cmd_level $chainref;
-    log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
-    add_jump $chainref, $target, 0, "-d \$address ";
-    decr_cmd_level $chainref;
-    add_commands $chainref, 'done';
-
-    1;
-
-    ?end perl;
+?end perl;
 ?endif

Shorewall/Actions/action.DNSAmp

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Drop.deprecated

@@ -0,0 +1,84 @@
+#
+# Shorewall -- /usr/share/shorewall/action.Drop
+#
+# The former default DROP common rules. Use of this action is now deprecated
+#
+# This action is invoked before a DROP policy is enforced. The purpose
+# of the action is:
+#
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
+#
+# The action accepts six optional parameters:
+#
+# 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
+#     actions.
+# 2 - Action to take with Auth requests. Default is to do nothing special
+#     with them.
+# 3 - Action to take with SMB requests. Default is DROP or A_DROP,
+#     depending on the setting of the first parameter.
+# 4 - Action to take with required ICMP packets. Default is ACCEPT or
+#     A_ACCEPT depending on the first parameter.
+# 5 - Action to take with late DNS replies (UDP source port 53). Default
+#     is DROP or A_DROP depending on the first parameter.
+# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
+#     depending on the first parameter.
+#
+# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
+#
+###############################################################################
+?warning "You are using the deprecated Drop default action. Please see http://www.shorewall.net/Actions.html#Default"
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+DEFAULTS -,-,A_DROP,A_ACCEPT,A_DROP,A_DROP
+    ?else
+        ?error The first parameter to Drop must be 'audit' or '-'
+    ?endif
+?else
+DEFAULTS -,-,DROP,ACCEPT,DROP,DROP
+?endif
+
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
+#
+# Count packets that come through here
+#
+COUNT
+#
+# Special Handling for Auth
+#
+?if passed(@2)
+Auth(@2)
+?endif
+#
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before silent broadcast Drop.
+#
+AllowICMPs(@4)	-	-	icmp
+#
+# Don't log broadcasts or multicasts
+#
+Broadcast(DROP,@1)
+Multicast(DROP,@1)
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log.
+#
+Invalid(DROP,@1)
+#
+# Drop Microsoft noise so that it doesn't clutter up the log.
+#
+SMB(@3)
+DropUPnP(@6)
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+NotSyn(DROP,@1)	-	-	tcp
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+DropDNSrep(@5)

Shorewall/Actions/action.Established

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.FIN

@@ -1,33 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.FIN
-#
-# FIN Action
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# FIN[([<action>])]
-#
-# Default action is ACCEPT
-#
-###############################################################################
-
-DEFAULTS ACCEPT,-
-
-@1	 -	-	;;+ -p 6 --tcp-flags ACK,FIN ACK,FIN

Shorewall/Actions/action.GlusterFS

@@ -13,9 +13,9 @@
 DEFAULTS 2,0
 
 ?if @1 !~ /^\d+/ || ! @1 || @1 > 1024
-    ?error Invalid value (@1) for the GlusterFS Bricks argument
+    ?error Invalid value for Bricks (@1)
 ?elsif @2 !~ /^[01]$/
-    ?error Invalid value (@2) for the GlusterFS IB argument
+    ?error Invalid value for IB (@2)
 ?endif
 
 #ACTION		SOURCE		DEST		PROTO	DPORT

Shorewall/Actions/action.IfEvent

@@ -107,11 +107,6 @@ if ( $command & $REAP_OPT ) {
 
 $duration .= '--rttl ' if $command & $TTL_OPT;
 
-if ( ( $targets{$action} || 0 ) & NATRULE ) {
-    perl_action_helper( "${action}-", "-m recent --rcheck ${duration}--hitcount $hitcount" );
-    $action = 'ACCEPT';
-}
-
 if ( $command & $RESET_CMD ) {
     require_capability 'MARK_ANYWHERE', '"reset"', 's';
 
@@ -135,7 +130,7 @@ if ( $command & $RESET_CMD ) {
     #
     # if the event is armed, remove it and perform the action
     #
-    perl_action_helper( $action , "-m mark --mark $mark/$mark -m recent --remove --name $event $srcdst" );
+    perl_action_helper( $action , "-m mark --mark $mark/$mark -m recent --remove --name $event" );
 } elsif ( $command & $UPDATE_CMD ) {
     perl_action_helper( $action, "-m recent --update ${duration}--hitcount $hitcount --name $event $srcdst" );
 } else {

Shorewall/Actions/action.Invalid

@@ -4,7 +4,7 @@
 # Invalid Action
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Multicast

@@ -3,7 +3,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #
@@ -29,28 +29,22 @@
 DEFAULTS DROP,-
 
 ?if __ADDRTYPE
-    @1	-	-	-	;; -m addrtype --dst-type MULTICAST
+@1	-	-	-	;; -m addrtype --dst-type MULTICAST
 ?else
-    ?begin perl;
+?begin perl;
 
-    use strict;
-    use Shorewall::IPAddrs;
-    use Shorewall::Config;
-    use Shorewall::Chains;
+use Shorewall::IPAddrs;
+use Shorewall::Config;
+use Shorewall::Chains;
 
-    my ( $action, $audit ) = get_action_params( 2 );
-    my $chainref           = get_action_chain;
-    my ( $level, $tag )    = get_action_logging;
+my ( $action )         = get_action_params( 1 );
+my $chainref           = get_action_chain;
+my ( $level, $tag )    = get_action_logging;
 
-    fatal_error "Invalid parameter to action Multicast" if supplied $audit && $audit ne 'audit';
+log_rule_limit $level, $chainref, 'Multicast' , $action, '', $tag, 'add', ' -d 224.0.0.0/4 ' if $level ne '';
+add_jump $chainref, $action, 0, '-d 224.0.0.0/4 ';
 
-    my $target = require_audit ( $action , $audit );
-    my $dest   = ( $family == F_IPV4 ) ? join( ' ', '-d', IPv4_MULTICAST . ' ' ) : join( ' ', '-d', IPv6_MULTICAST . ' ' );
+1;
 
-    log_rule_limit( $level, $chainref, 'Multicast' , $action, '', $tag, 'add', $dest ) if $level ne '';
-    add_jump $chainref, $target, 0, $dest;
-
-    1;
-
-    ?end perl;
+?end perl;
 ?endif

Shorewall/Actions/action.New

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.NotSyn

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.RST

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Reject.deprecated

@@ -0,0 +1,85 @@
+#
+# Shorewall -- /usr/share/shorewall/action.Reject
+#
+# The former default REJECT action common rules. Use of this action is deprecated.
+#
+# This action is invoked before a REJECT policy is enforced. The purpose
+# of the action is:
+#
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
+#
+# The action accepts six optional parameters:
+#
+# 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
+#     actions.
+# 2 - Action to take with Auth requests. Default is to do nothing
+#     special with them.
+# 3 - Action to take with SMB requests. Default is REJECT or A_REJECT,
+#     depending on the setting of the first parameter.
+# 4 - Action to take with required ICMP packets. Default is ACCEPT or
+#     A_ACCEPT depending on the first parameter.
+# 5 - Action to take with late DNS replies (UDP source port 53). Default
+#     is DROP or A_DROP depending on the first parameter.
+# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
+#     depending on the first parameter.
+#
+# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
+###############################################################################
+?warning "You are using the deprecated Reject default action. Please see http://www.shorewall.net/Actions.html#Default"
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+DEFAULTS -,-,A_REJECT,A_ACCEPT,A_DROP,A_DROP
+    ?else
+	?error The first parameter to Reject must be 'audit' or '-'
+    ?endif
+?else
+DEFAULTS -,-,REJECT,ACCEPT,DROP,DROP
+?endif
+
+#ACTION		SOURCE	DEST	PROTO
+#
+# Count packets that come through here
+#
+COUNT
+#
+# Special handling for Auth
+#
+?if passed(@2)
+Auth(@2)
+?endif
+#
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before silent broadcast Drop.
+#
+AllowICMPs(@4)	-	-	icmp
+#
+# Drop Broadcasts so they don't clutter up the log
+# (broadcasts must *not* be rejected).
+#
+Broadcast(DROP,@1)
+Multicast(DROP,@1)
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log (these ICMPs cannot be
+# rejected).
+#
+Invalid(DROP,@1)
+#
+# Reject Microsoft noise so that it doesn't clutter up the log.
+#
+SMB(@3)
+DropUPnP(@6)
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+NotSyn(DROP,@1)	-	-	tcp
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+DropDNSrep(@5)

Shorewall/Actions/action.Related

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.ResetEvent

@@ -41,11 +41,6 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
 set_action_disposition( $disposition) if supplied $disposition;
 set_action_name_to_caller;
 
-if ( ( $targets{$action} || 0 ) & NATRULE ) {
-    perl_action_helper( "${action}-", "" );
-    $action = 'ACCEPT';
-}
-
 if ( $destination eq 'dst' ) {
     perl_action_helper( $action, '', '', "-m recent --name $event --remove --rdest" );
 } else {

Shorewall/Actions/action.SetEvent

@@ -37,11 +37,6 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
 set_action_disposition( $disposition) if supplied $disposition;
 set_action_name_to_caller;
 
-if ( ( $targets{$action} || 0 ) & NATRULE ) {
-    perl_action_helper( "${action}-", "" );
-    $action = 'ACCEPT';
-}
-
 if ( $destination eq 'dst' ) {
     perl_action_helper( $action, '', '', "-m recent --name $event --set --rdest" );
 } else {

Shorewall/Actions/action.TCPFlags

@@ -26,4 +26,4 @@ $tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL FIN,URG,PSH
 $tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL NONE
 $tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,RST SYN,RST
 $tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,FIN SYN,FIN
-$tcpflags_action	-	-	;;+ -p 6 --syn --sport 0
+$tcpflags_action	-	-	;;+ -p tcp --syn --sport 0

Shorewall/Actions/action.Untracked

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.allowInvalid

@@ -3,7 +3,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.dropBcasts

@@ -1,39 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.dropBcasts
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at http://shorewall.net
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# dropBcasts[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Broadcast(A_DROP)
-    ?else
-	?error "Invalid argument (@1) to dropBcasts"
-    ?endif
-?else
-    Broadcast(DROP)
-?endif
-

Shorewall/Actions/action.dropInvalid

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Contrib/swping

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     Shorewall WAN Interface monitor - V5.2
+#     Shorewall WAN Interface monitor - V4.4
 #
 #     Inspired by Angsuman Chakraborty's gwping script.
 #

Shorewall/Contrib/swping.init

@@ -1,5 +1,5 @@
 #!/bin/sh
-#     Shorewall WAN Interface monitor - V5.2
+#     Shorewall WAN Interface monitor - V4.4
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall/Macros/IPFS-swarm

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.IPFS-swarm
-#
-# This macro handles IPFS data traffic (the connection to IPFS swarm).
-#
-###############################################################################
-#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
-
-PARAM   -       -       tcp     4001

Shorewall/Macros/macro.Bitcoin

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.Bitcoin
-#
-# Macro for handling Bitcoin P2P traffic
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	8333

Shorewall/Macros/macro.BitcoinRPC

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.BitcoinRPC
-#
-# Macro for handling Bitcoin RPC traffic
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	8332

Shorewall/Macros/macro.BitcoinZMQ

@@ -1,9 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.BitcoinZMQ
-#
-# Macro for handling Bitcoin ZMQ traffic
-# See https://github.com/bitcoin/bitcoin/blob/master/doc/zmq.md
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	28332

Shorewall/Macros/macro.Cockpit

@@ -1,12 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.Cockpit
-#
-# This macro handles Time protocol (RFC868).
-# Unless you are supporting extremely old hardware or software,
-# you shouldn't be using this.  NTP is a superior alternative.
-#
-#		By Eric Teeter
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	tcp	9090

Shorewall/Macros/macro.FreeIPA

@@ -1,16 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.FreeIPA
-#
-# This macro handles FreeIPA server traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-DNS
-HTTP
-HTTPS
-Kerberos
-Kpasswd
-LDAP
-LDAPS
-NTP

Shorewall/Macros/macro.IPFS-API

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.IPFS-API
-#
-# This macro handles IPFS API port (commands for the IPFS daemon).
-#
-###############################################################################
-#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
-
-PARAM   -       -       tcp     5001

Shorewall/Macros/macro.IPFS-gateway

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.IPFS-gateway
-#
-# This macro handles the IPFS gateway to HTTP.
-#
-###############################################################################
-#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
-
-PARAM   -       -       tcp     8080

Shorewall/Macros/macro.IPFS-swarm

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.IPFS-swarm
-#
-# This macro handles IPFS data traffic (the connection to IPFS swarm).
-#
-###############################################################################
-#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
-
-PARAM   -       -       tcp     4001

Shorewall/Macros/macro.IPMI

@@ -11,20 +11,13 @@
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
 PARAM	-	-	tcp	623		# RMCP
-PARAM	-	-	udp	623		# RMCP
 PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
-PARAM	-	-	tcp	5120,5122,5123	# CD,FD,HD (Asus, Aten)
+PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)
 PARAM	-	-	tcp	5900,5901	# Remote Console (Aten, Dell)
 PARAM	-	-	tcp	7578		# Remote Console (AMI)
-PARAM	-	-	tcp	8889		# WS-MAN
+PARAM	-	-	udp	623		# RMCP
 HTTP
-Telnet
-SNMP
-
-# TLS/secure ports
-PARAM	-	-	tcp	3520		# Remote Console (Redfish)
-PARAM	-	-	tcp	3669		# Virtual Media (Dell)
-PARAM	-	-	tcp	5124,5126,5127	# CD,FD,HD (AMI)
-PARAM	-	-	tcp	7582		# Remote Console (AMI)
 HTTPS
+SNMP
 SSH						# Serial over Lan
+Telnet

Shorewall/Macros/macro.Kpasswd

@@ -1,10 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.Kpasswd
-#
-# This macro handles Kerberos "passwd" traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	tcp	464
-PARAM	-	-	udp	464

Shorewall/Macros/macro.ONCRPC

@@ -1,8 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.ONCRPC
-#
-# This macro handles ONC RCP traffic (for rpcbind on Linux, etc).
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp,udp	111

Shorewall/Macros/macro.RDP

@@ -6,5 +6,4 @@
 ###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
-PARAM	-	-	udp	3389
 PARAM	-	-	tcp	3389

Shorewall/Macros/macro.RedisSecure

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.RedisSecure
-#
-# This macro handles Redis Secure (SSL/TLS) traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	tcp	6380

Shorewall/Macros/macro.Rwhois

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.Rwhois
-#
-# This macro handles Remote Who Is (rwhois) traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	tcp	4321

Shorewall/Macros/macro.SNMPTrap.deprecated

@@ -1,9 +1,9 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Apcupsd
+# Shorewall - /usr/share/shorewall/macro.SNMPtrap
 #
-# This macro handles apcupsd traffic.
+# This macro deprecated by SNMPtrap.
 #
 ###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
-PARAM	-	-	tcp	3551
+SNMPtrap

Shorewall/Macros/macro.SSDP

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.SSDP
-#
-# This macro handles SSDP (used by DLNA/UPnP) client traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	udp	1900

Shorewall/Macros/macro.SSDPserver

@@ -1,10 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.SSDPserver
-#
-# This macro handles SSDP (used by DLNA/UPnP) server bidirectional traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	udp	1900
-PARAM	DEST	SOURCE	udp	-	1900

Shorewall/Macros/macro.Tor

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.Tor
-#
-# Macro for handling Tor Onion Network traffic
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	9001	

Shorewall/Macros/macro.TorBrowserBundle

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.TorBrowserBundle
-#
-# Macro for handling Tor Onion Network traffic provided by Tor Browser Bundle
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	9150

Shorewall/Macros/macro.TorControl

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.TorControl
-#
-# Macro for handling Tor Controller Applications traffic
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	9051	

Shorewall/Macros/macro.TorDirectory

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.TorDirectory
-#
-# Macro for handling Tor Directory traffic
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	9030

Shorewall/Macros/macro.TorSocks

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.TorSocks
-#
-# Macro for handling Tor Socks Proxy traffic
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	9050	

Shorewall/Macros/macro.WUDO

@@ -1,9 +0,0 @@
-
-# Shorewall -- /usr/share/shorewall/macro.WUDO
-#
-# This macro handles WUDO (Windows Update Delivery Optimization)
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	tcp	7680

Shorewall/Makefile-lite

@@ -0,0 +1,82 @@
+#     Shorewall Packet Filtering Firewall Export Directory Makefile - V4.2
+#
+#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+#     (c) 2006 - Tom Eastep (teastep@shorewall.net)
+#
+#	Shorewall documentation is available at http://www.shorewall.net
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of Version 2 of the GNU General Public License
+#	as published by the Free Software Foundation.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, write to the Free Software
+#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+################################################################################
+# Place this file in each export directory. Modify each copy to set HOST
+# to the name of the remote firewall corresponding to the directory.
+#
+#	To make the 'firewall' script, type "make".
+#
+#	Once the script is compiling correctly, you can install it by
+#	typing "make install".
+#
+################################################################################
+#                             V A R I A B L E S
+#
+# Files in the export directory on which the firewall script does not depend
+#
+IGNOREFILES =  firewall% Makefile% trace% %~
+#
+# Remote Firewall system
+#
+HOST = gateway
+#
+# Save some typing
+#
+LITEDIR = /var/lib/shorewall-lite
+#
+# Set this if the remote system has a non-standard modules directory
+#
+MODULESDIR=
+#
+# Default target is the firewall script
+#
+################################################################################
+#                                T A R G E T S
+#
+all: firewall
+#
+# Only generate the capabilities file if it doesn't already exist
+#
+capabilities:
+	ssh root@$(HOST) "MODULESDIR=$(MODULESDIR) /usr/share/shorewall-lite/shorecap > $(LITEDIR)/capabilities"
+	scp root@$(HOST):$(LITEDIR)/capabilities .
+#
+# Compile the firewall script. Using the 'wildcard' function causes "*" to be expanded so that
+# 'filter-out' will be presented with the list of files in this directory rather than "*"
+#
+firewall: $(filter-out $(IGNOREFILES) capabilities , $(wildcard *) ) capabilities
+	shorewall compile -e . firewall
+#
+# Only reload on demand.
+#
+install: firewall
+	scp firewall firewall.conf root@$(HOST):$(LITEDIR)
+	ssh root@$(HOST) "/sbin/shorewall-lite restart"
+#
+# Save running configuration
+#
+save:
+	ssh root@$(HOST) "/sbin/shorewall-lite save"
+#
+# Remove generated files
+#
+clean:
+	rm -f capabilities firewall firewall.conf reload

Shorewall/Perl/Shorewall/ARP.pm

@@ -1,5 +1,5 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/ARP.pm
+# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/ARP.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall/Perl/Shorewall/Accounting.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Accounting.pm
+# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Accounting.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2019 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -195,19 +195,12 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
     $ports  = ''    if $ports  eq 'any' || $ports  eq 'all';
     $sports = ''    if $sports eq 'any' || $sports eq 'all';
 
-    fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT_SECTION;
+    fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT;
 
     my $rule = do_proto( $proto, $ports, $sports ) . do_user ( $user ) . do_test ( $mark, $globals{TC_MASK} ) . do_headers( $headers );
     my $prerule = '';
     my $rule2 = 0;
     my $jump  = 0;
-    my $raw_matches = get_inline_matches(1);
-
-    if ( $raw_matches =~ s/^\s*+// ) {
-	$prerule = $raw_matches;
-    } else {
-	$rule .= $raw_matches;
-    }
 
     unless ( $action eq 'COUNT' ) {
 	if ( $action eq 'DONE' ) {
@@ -249,7 +242,9 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 		    $rule .= do_nfacct( $_ );
 		}
 	    }
-	} elsif ( $action ne 'INLINE' ) {
+	} elsif ( $action eq 'INLINE' ) {
+	    $rule .= get_inline_matches(1);
+	} else {
 	    ( $action, my $cmd ) = split /:/, $action;
 
 	    if ( $cmd ) {
@@ -271,7 +266,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
     if ( $source eq 'any' || $source eq 'all' ) {
         $source = ALLIP;
     } else {
-	fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT_SECTION || ! $asection );
+	fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT || ! $asection );
     }
 
     if ( have_bridges && ! $asection ) {
@@ -287,7 +282,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 
 	    if ( $dest eq 'any' || $dest eq 'all' || $dest eq ALLIP ) {
 		expand_rule(
-			    ensure_chain ( $config{ACCOUNTING_TABLE}, 'accountout' ) ,
+			    ensure_rules_chain ( 'accountout' ) ,
 			    OUTPUT_RESTRICT ,
 			    $prerule ,
 			    $rule ,

Shorewall/Perl/Shorewall/Compiler.pm

@@ -1,10 +1,10 @@
 #! /usr/bin/perl -w
 #
-#     The Shoreline Firewall Packet Filtering Firewall Compiler - V5.2
+#     The Shoreline Firewall Packet Filtering Firewall Compiler - V5.0
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2019 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -47,19 +47,19 @@ our @EXPORT = qw( compiler );
 our @EXPORT_OK = qw( $export );
 our $VERSION = 'MODULEVERSION';
 
-our $export;          # True when compiling for export
+our $export;
 
-our $test;            # True when running regression tests
+our $test;
 
-our $family;          # IP address family (4 or 6)
+our $family;
 
-our $have_arptables;  # True if we have arptables rules
+our $have_arptables;
 
 #
 # Initilize the package-globals in the other modules
 #
 sub initialize_package_globals( $$$ ) {
-    Shorewall::Config::initialize($family, $export, $_[1], $_[2]);
+    Shorewall::Config::initialize($family, $_[1], $_[2]);
     Shorewall::Chains::initialize ($family, 1, $export );
     Shorewall::Zones::initialize ($family, $_[0]);
     Shorewall::Nat::initialize($family);
@@ -103,13 +103,13 @@ sub generate_script_1( $ ) {
 
     copy2( $lib, $debug ) if -f $lib;
 
-    emithd<<'EOF';
+    emit <<'EOF';
 ################################################################################
 # Functions to execute the various user exits (extension scripts)
 ################################################################################
 EOF
 
-    for my $exit ( qw/init start tcclear started stop stopped clear restored enabled disabled/ ) {
+    for my $exit ( qw/init start tcclear started stop stopped clear refresh refreshed restored/ ) {
 	emit "\nrun_${exit}_exit() {";
 	push_indent;
 	append_file $exit or emit 'true';
@@ -125,7 +125,7 @@ EOF
 	emit '}';
     }
 
-    emithd <<'EOF';
+    emit <<'EOF';
 ################################################################################
 # End user exit functions
 ################################################################################
@@ -209,8 +209,6 @@ sub generate_script_2() {
     emit (   '[ -f ${g_confdir}/vardir ] && . ${g_confdir}/vardir' );
     emit ( qq([ -n "\${VARDIR:=$shorewallrc1{VARDIR}}" ]) );
     emit ( qq([ -n "\${VARLIB:=$shorewallrc1{VARLIB}}" ]) );
-    emit ( qq([ -n "\${CONFDIR:=$shorewallrc1{CONFDIR}}" ]) );
-    emit ( qq([ -n "\${SHAREDIR:=$shorewallrc1{SHAREDIR}}" ]) );
 
     emit 'TEMPFILE=';
 
@@ -268,18 +266,13 @@ sub generate_script_2() {
 	emit( '',
 	      'chain_exists DOCKER nat && chain_exists DOCKER && g_docker=Yes',
 	    );
-	emit( 'chain_exists DOCKER-INGRESS   && g_dockeringress=Yes' );
-	emit( 'chain_exists DOCKER-USER      && g_dockeruser=Yes' );
-	emit( 'if chain_exists DOCKER-ISOLATION; then',
-	      '    g_dockernetwork=One',
-	      'elif chain_exists DOCKER-ISOLATION-STAGE-1; then',
-	      '    g_dockernetwork=Two',
-	      'fi' );
+	emit( 'chain_exists DOCKER-ISOLATION && g_dockernetwork=Yes]' );
+	emit( '' );
     }
 
     pop_indent;
 
-    emit "}\n"; # End of initialize()
+    emit "\n}\n"; # End of initialize()
 
     emit( '' ,
 	  '#' ,
@@ -316,9 +309,10 @@ sub generate_script_2() {
 	    push_indent;
 
 	    if ( $global_variables == ( ALL_COMMANDS | NOT_RESTORE ) ) {
-		verify_required_interfaces(0);
+
 		set_global_variables(0, 0);
-		handle_optional_interfaces;
+
+		handle_optional_interfaces(0);
 	    }
 
 	    emit ';;';
@@ -330,19 +324,19 @@ sub generate_script_2() {
 	    push_indent;
 	}
 
-	verify_required_interfaces(1);
 	set_global_variables(1,1);
-	handle_optional_interfaces;
 
 	if ( $global_variables & NOT_RESTORE ) {
+	    handle_optional_interfaces(1);
 	    emit ';;';
 	    pop_indent;
 	    pop_indent;
 	    emit ( 'esac' );
+	} else {
+	    handle_optional_interfaces(1);
 	}
     } else {
-	verify_required_interfaces(1);
-	emit( 'true' ) unless handle_optional_interfaces;
+	emit( 'true' ) unless handle_optional_interfaces(1);
     }
 
     pop_indent;
@@ -361,7 +355,7 @@ sub generate_script_2() {
 #    Note: This function is not called when $command eq 'check'. So it must have no side effects other
 #          than those related to writing to the output script file.
 #
-sub generate_script_3() {
+sub generate_script_3($) {
 
     if ( $family == F_IPV4 ) {
 	progress_message2 "Creating iptables-restore input...";
@@ -371,6 +365,7 @@ sub generate_script_3() {
 
     create_netfilter_load( $test );
     create_arptables_load( $test ) if $have_arptables;
+    create_chainlist_reload( $_[0] );
     create_save_ipsets;
     create_load_ipsets;
 
@@ -384,10 +379,10 @@ sub generate_script_3() {
     save_progress_message 'Initializing...';
 
     if ( $export || $config{EXPORTMODULES} ) {
-	my $fn = find_file( 'helpers' );
+	my $fn = find_file( $config{LOAD_HELPERS_ONLY} ? 'helpers' : 'modules' );
 
 	if ( -f $fn && ( $config{EXPORTMODULES} || ( $export && ! $fn =~ "^$globals{SHAREDIR}/" ) ) ) {
-	    emit 'echo MODULESDIR=\"$MODULESDIR\" > ${VARDIR}/.modulesdir';
+	    emit 'echo MODULESDIR="$MODULESDIR" > ${VARDIR}/.modulesdir';
 	    emit 'cat > ${VARDIR}/.modules << EOF';
 	    open_file $fn;
 
@@ -402,10 +397,16 @@ sub generate_script_3() {
 	emit 'load_kernel_modules Yes';
     }
 
-    emit( '' ,
-	  'run_init_exit',
-	  '' ,
-	  'load_ipsets' ,
+    emit '';
+
+    emit ( 'if [ "$COMMAND" = refresh ]; then' ,
+	   '   run_refresh_exit' ,
+	   'else' ,
+	   '    run_init_exit',
+	   'fi',
+	   '' );
+
+    emit( 'load_ipsets' ,
 	  '' );
 
     create_nfobjects;
@@ -463,6 +464,11 @@ sub generate_script_3() {
     dump_proxy_arp;
     emit_unindented '__EOF__';
 
+    emit( '',
+	  'if [ "$COMMAND" != refresh ]; then' );
+
+    push_indent;
+
     emit 'cat > ${VARDIR}/zones << __EOF__';
     dump_zone_contents;
     emit_unindented '__EOF__';
@@ -475,6 +481,10 @@ sub generate_script_3() {
     dump_mark_layout;
     emit_unindented '__EOF__';
 
+    pop_indent;
+
+    emit "fi\n";
+
     emit '> ${VARDIR}/nat';
 
     add_addresses;
@@ -513,12 +523,29 @@ sub generate_script_3() {
 
     my $config_dir = $globals{CONFIGDIR};
 
-    emithd <<"EOF";
+    emit<<"EOF";
     set_state Started $config_dir
     run_restored_exit
-else
-    setup_netfilter
+elif [ \$COMMAND = refresh ]; then
+    chainlist_reload
 EOF
+    push_indent;
+    setup_load_distribution;
+    setup_forwarding( $family , 0 );
+    pop_indent;
+    #
+    # Use a parameter list rather than 'here documents' to avoid an extra blank line
+    #
+    emit( '    run_refreshed_exit',
+	  '    do_iptables -N shorewall' );
+
+    emit( '    do_iptables -A shorewall -m recent --set --name %CURRENTTIME' ) if have_capability 'RECENT_MATCH';
+
+    emit( "    set_state Started $config_dir",
+	  '    [ $0 = ${VARDIR}/firewall ] || cp -f $(my_pathname) ${VARDIR}/firewall',
+	  'else',
+	  '    setup_netfilter'	);
+
     push_indent;
     emit 'setup_arptables' if $have_arptables;
     setup_load_distribution;
@@ -543,7 +570,7 @@ EOF
 	  '    run_started_exit',
 	  "fi\n" );
 
-    emithd<<'EOF';
+    emit<<'EOF';
 date > ${VARDIR}/restarted
 
 case $COMMAND in
@@ -553,6 +580,9 @@ case $COMMAND in
     reload)
         mylogger kern.info "$g_product reloaded"
         ;;
+    refresh)
+        mylogger kern.info "$g_product refreshed"
+        ;;
     restore)
         mylogger kern.info "$g_product restored"
         ;;
@@ -587,8 +617,8 @@ sub compile_info_command() {
 #
 sub compiler {
 
-    my ( $scriptfilename, $directory, $verbosity, $timestamp , $debug, $log , $log_verbosity, $preview, $confess , $update , $annotate , $config_path, $shorewallrc                      , $shorewallrc1 ) =
-       ( '',              '',         -1,         '',          0,      '',    -1,             0,        0,         0,        0,        , ''          , '/usr/share/shorewall/shorewallrc', ''            );
+    my ( $scriptfilename, $directory, $verbosity, $timestamp , $debug, $chains , $log , $log_verbosity, $preview, $confess , $update , $annotate , $config_path, $shorewallrc                      , $shorewallrc1 , $inline ) =
+       ( '',              '',         -1,          '',          0,      '',       '',   -1,             0,        0,         0,        0,        , ''          , '/usr/share/shorewall/shorewallrc', ''            , 0 );
 
     $export         = 0;
     $test           = 0;
@@ -617,6 +647,7 @@ sub compiler {
 		  timestamp     => { store => \$timestamp,     validate => \&validate_boolean   } ,
 		  debug         => { store => \$debug,         validate => \&validate_boolean   } ,
 		  export        => { store => \$export ,       validate => \&validate_boolean   } ,
+		  chains        => { store => \$chains },
 		  log           => { store => \$log },
 		  log_verbosity => { store => \$log_verbosity, validate => \&validate_verbosity } ,
 		  test          => { store => \$test },
@@ -624,6 +655,7 @@ sub compiler {
 		  confess       => { store => \$confess,       validate=> \&validate_boolean    } ,
 		  update        => { store => \$update,        validate=> \&validate_boolean    } ,
 		  annotate      => { store => \$annotate,      validate=> \&validate_boolean    } ,
+		  inline        => { store => \$inline,        validate=> \&validate_boolean    } ,
 		  config_path   => { store => \$config_path } ,
 		  shorewallrc   => { store => \$shorewallrc } ,
 		  shorewallrc1  => { store => \$shorewallrc1 } ,
@@ -657,10 +689,9 @@ sub compiler {
     set_timestamp( $timestamp );
     set_debug( $debug , $confess );
     #
-    #                                      S H O R E W A L L R C ,
     #                      S H O R E W A L L . C O N F  A N D  C A P A B I L I T I E S
     #
-    get_configuration( $export , $update , $annotate );
+    get_configuration( $export , $update , $annotate , $inline );
     #
     # Chain table initialization depends on shorewall.conf and capabilities. So it must be deferred until
     # now when shorewall.conf has been processed and the capabilities have been determined.
@@ -762,10 +793,13 @@ sub compiler {
 	emit '}'; # End of setup_common_rules()
     }
 
+    disable_script;
     #
     #                      R O U T I N G _ A N D _ T R A F F I C _ S H A P I N G
     #         (Writes the setup_routing_and_traffic_shaping() function to the compiled script)
     #
+    enable_script;
+    #
     # Validate the TC files so that the providers will know what interfaces have TC
     #
     my $tcinterfaces = process_tc;
@@ -783,7 +817,7 @@ sub compiler {
     #
     # Setup Masquerade/SNAT
     #
-    setup_snat;
+    setup_snat( $update );
     #
     # Setup Nat
     #
@@ -864,7 +898,7 @@ sub compiler {
 
 	optimize_level0;
 
-	if ( ( my $optimize = $config{OPTIMIZE} ) & OPTIMIZE_MASK ) {
+	if ( ( my $optimize = $config{OPTIMIZE} ) & 0x1E ) {
 	    progress_message2 'Optimizing Ruleset...';
 	    #
 	    # Optimize Policy Chains
@@ -886,7 +920,7 @@ sub compiler {
 	#                          N E T F I L T E R   L O A D
 	#    (Produces setup_netfilter(), setup_arptables(), chainlist_reload() and define_firewall() )
 	#
-	generate_script_3();
+	generate_script_3( $chains );
 	#
 	# We must reinitialize Shorewall::Chains before generating the iptables-restore input
 	# for stopping the firewall

Shorewall/Perl/Shorewall/IPAddrs.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/IPAddrs.pm
+# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/IPAddrs.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2015 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -60,10 +60,10 @@ our @EXPORT = ( qw( ALLIPv4
 		  decompose_net
 		  decompose_net_u32
 		  compare_nets
-		  loopback_address
 		  validate_host
 		  validate_range
 		  ip_range_explicit
+		  expand_port_range
 		  allipv4
 		  allipv6
 		  allip
@@ -74,6 +74,10 @@ our @EXPORT = ( qw( ALLIPv4
 		  resolve_proto
 		  resolve_dnsname
 		  proto_name
+		  validate_port
+		  validate_portpair
+		  validate_portpair1
+		  validate_port_list
 		  validate_icmp
 		  validate_icmp6
 		 ) );
@@ -99,14 +103,12 @@ our $resolve_dnsname;
 our $validate_range;
 our $validate_host;
 our $family;
-our $loopback_address;
 
 use constant { ALLIPv4             => '0.0.0.0/0' ,
 	       ALLIPv6             => '::/0' ,
 	       NILIPv4             => '0.0.0.0' ,
 	       NILIPv6             => '::' ,
 	       IPv4_MULTICAST      => '224.0.0.0/4' ,
-	       IPv4_LOOPBACK       => '127.0.0.1' ,
 	       IPv6_MULTICAST      => 'ff00::/8' ,
 	       IPv6_LINKLOCAL      => 'fe80::/10' ,
 	       IPv6_SITELOCAL      => 'feC0::/10' ,
@@ -373,10 +375,6 @@ sub rfc1918_networks() {
     @rfc1918_networks
 }
 
-sub loopback_address() {
-    $loopback_address;
-}
-
 #
 # Protocol/port validation
 #
@@ -413,6 +411,114 @@ sub proto_name( $ ) {
     $proto =~ /^(\d+)$/ ? $prototoname[ $proto ] || scalar getprotobynumber $proto : $proto
 }
 
+sub validate_port( $$ ) {
+    my ($proto, $port) = @_;
+
+    my $value;
+
+    if ( $port =~ /^(\d+)$/ || $port =~ /^0x/ ) {
+	$port = numeric_value $port;
+	return $port if defined $port && $port && $port <= 65535;
+    } else {
+	$proto = proto_name $proto if $proto =~ /^(\d+)$/;
+	$value = getservbyname( $port, $proto );
+    }
+
+    return $value if defined $value;
+
+    fatal_error "The separator for a port range is ':', not '-' ($port)" if $port =~ /^\d+-\d+$/;
+
+    fatal_error "Invalid/Unknown $proto port/service ($_[1])" unless defined $value;
+}
+
+sub validate_portpair( $$ ) {
+    my ($proto, $portpair) = @_;
+    my $what;
+    my $pair = $portpair;
+    #
+    # Accept '-' as a port-range separator
+    #
+    $pair =~ tr/-/:/ if $pair =~ /^[-0-9]+$/;
+
+    fatal_error "Invalid port range ($portpair)" if $pair =~ tr/:/:/ > 1;
+
+    $pair = "0$pair"       if substr( $pair,  0, 1 ) eq ':';
+    $pair = "${pair}65535" if substr( $pair, -1, 1 ) eq ':';
+
+    my @ports = split /:/, $pair, 2;
+
+    my $protonum = resolve_proto( $proto ) || 0;
+
+    $_ = validate_port( $protonum, $_) for grep $_, @ports;
+
+    if ( @ports == 2 ) {
+	$what = 'port range';
+	fatal_error "Invalid port range ($portpair)" unless $ports[0] < $ports[1];
+    } else {
+	$what = 'port';
+    }
+
+    fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, UDPLITE, SCTP or DCCP" unless
+	defined $protonum && ( $protonum == TCP     ||
+			       $protonum == UDP     ||
+			       $protonum == UDPLITE ||
+			       $protonum == SCTP    ||
+			       $protonum == DCCP );
+    join ':', @ports;
+
+}
+
+sub validate_portpair1( $$ ) {
+    my ($proto, $portpair) = @_;
+    my $what;
+
+    fatal_error "Invalid port range ($portpair)" if $portpair =~ tr/-/-/ > 1;
+
+    $portpair = "1$portpair"       if substr( $portpair,  0, 1 ) eq ':';
+    $portpair = "${portpair}65535" if substr( $portpair, -1, 1 ) eq ':';
+
+    my @ports = split /-/, $portpair, 2;
+
+    my $protonum = resolve_proto( $proto ) || 0;
+
+    $_ = validate_port( $protonum, $_) for grep $_, @ports;
+
+    if ( @ports == 2 ) {
+	$what = 'port range';
+	fatal_error "Invalid port range ($portpair)" unless $ports[0] && $ports[0] < $ports[1];
+    } else {
+	$what = 'port';
+	fatal_error 'Invalid port number (0)' unless $portpair;
+    }
+
+    fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, SCTP or DCCP" unless
+	defined $protonum && ( $protonum == TCP  ||
+			       $protonum == UDP  ||
+			       $protonum == SCTP ||
+			       $protonum == DCCP );
+    join '-', @ports;
+
+}
+
+sub validate_port_list( $$ ) {
+    my $result = '';
+    my ( $proto, $list ) = @_;
+    my @list   = split_list( $list, 'port' );
+
+    if ( @list > 1 && $list =~ /[:-]/ ) {
+	require_capability( 'XMULTIPORT' , 'Port ranges in a port list', '' );
+    }
+
+    $proto = proto_name $proto;
+
+    for ( @list ) {
+	my $value = validate_portpair( $proto , $_ );
+	$result = $result ? join ',', $result, $value : $value;
+    }
+
+    $result;
+}
+
 my %icmp_types = ( any                          => 'any',
 		   'echo-reply'                 => 0,
 		   'destination-unreachable'    => 3,
@@ -466,6 +572,67 @@ sub validate_icmp( $ ) {
     fatal_error "Invalid ICMP Type ($type)"
 }
 
+#
+# Expands a port range into a minimal list of ( port, mask ) pairs.
+# Each port and mask are expressed as 4 hex nibbles without a leading '0x'.
+#
+# Example:
+#
+#       DB<3> @foo = Shorewall::IPAddrs::expand_port_range( 6, '110:' ); print "@foo\n"
+#       006e fffe 0070 fff0 0080 ff80 0100 ff00 0200 fe00 0400 fc00 0800 f800 1000 f000 2000 e000 4000 c000 8000 8000
+#
+sub expand_port_range( $$ ) {
+    my ( $proto, $range ) = @_;
+
+    if ( $range =~ /^(.*):(.*)$/ ) {
+	my ( $first, $last ) = ( $1, $2);
+	my @result;
+
+	fatal_error "Invalid port range ($range)" unless $first ne '' or $last ne '';
+	#
+	# Supply missing first/last port number
+	#
+	$first = 0     if $first eq '';
+	$last  = 65535 if $last eq '';
+	#
+	# Validate the ports
+	#
+	( $first , $last ) = ( validate_port( $proto, $first || 1 ) , validate_port( $proto, $last ) );
+
+	$last++; #Increment last address for limit testing.
+	#
+	# Break the range into groups:
+	#
+	#      - If the first port in the remaining range is odd, then the next group is ( <first>, ffff ).
+	#      - Otherwise, find the largest power of two P that divides the first address such that
+	#        the remaining range has less than or equal to P ports. The next group is
+	#        ( <first> , ~( P-1 ) ).
+	#
+	while ( ( my $ports = ( $last - $first ) ) > 0 ) {
+	    my $mask = 0xffff;         #Mask for current ports in group.
+	    my $y    = 2;              #Next power of two to test
+	    my $z    = 1;              #Number of ports in current group (Previous value of $y).
+
+	    while ( ( ! ( $first % $y ) ) && ( $y <= $ports ) ) {
+		$mask <<= 1;
+		$z  = $y;
+		$y <<= 1;
+	    }
+	    #
+	    #
+	    push @result, sprintf( '%04x', $first ) , sprintf( '%04x' , $mask & 0xffff );
+	    $first += $z;
+	}
+
+	fatal_error "Invalid port range ($range)" unless @result; # first port > last port
+
+	@result;
+
+    } else {
+	( sprintf( '%04x' , validate_port( $proto, $range ) ) , 'ffff' );
+    }
+}
+
 sub valid_6address( $ ) {
     my $address = $_[0];
 
@@ -762,7 +929,6 @@ sub initialize( $ ) {
 	$nilip            = NILIPv4;
 	@nilip            = @nilipv4;
 	$vlsm_width       = VLSMv4;
-	$loopback_address = IPv4_LOOPBACK;
 	$valid_address    = \&valid_4address;
 	$validate_address = \&validate_4address;
 	$validate_net     = \&validate_4net;
@@ -775,7 +941,6 @@ sub initialize( $ ) {
 	$nilip            = NILIPv6;
 	@nilip            = @nilipv6;
 	$vlsm_width       = VLSMv6;
-	$loopback_address = IPv6_LOOPBACK;
 	$valid_address    = \&valid_6address;
 	$validate_address = \&validate_6address;
 	$validate_net     = \&validate_6net;

Shorewall/Perl/Shorewall/Misc.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Misc.pm
+# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Misc.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2019 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -66,9 +66,6 @@ sub initialize( $ ) {
     $family = shift;
 }
 
-#
-# Warn that the tos file is no longer supported
-#
 sub process_tos() {
 
    if ( my $fn = open_file 'tos' ) {
@@ -148,9 +145,6 @@ sub setup_ecn()
     }
 }
 
-#
-# Add a logging rule followed by a jump
-#
 sub add_rule_pair( $$$$$ ) {
     my ($chainref , $predicate , $target , $level, $tag ) = @_;
 
@@ -408,9 +402,6 @@ EOF
     }
 }
 
-#
-# Convert a routestopped file into an equivalent stoppedrules file
-#
 sub convert_routestopped() {
 
     if ( my $fn = open_file 'routestopped' ) {
@@ -671,26 +662,12 @@ sub process_stoppedrules() {
     $result;
 }
 
-#
-# Generate the rules required when DOCKER=Yes
-#
 sub create_docker_rules() {
     add_commands( $nat_table->{PREROUTING} , '[ -n "$g_docker" ] && echo "-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER" >&3' );
 
     my $chainref = $filter_table->{FORWARD};
 
-    add_commands( $chainref, '[ -n "$g_dockeringress" ] && echo "-A FORWARD -j DOCKER-INGRESS" >&3', );
-    add_commands( $chainref, '[ -n "$g_dockeruser" ]    && echo "-A FORWARD -j DOCKER-USER"    >&3', );
-    add_commands( $chainref ,
-		  '',
-		  'case "$g_dockernetwork" in',
-		  '    One)',
-		  '        echo "-A FORWARD -j DOCKER-ISOLATION" >&3',
-		  '        ;;',
-		  '    Two)',
-		  '        echo "-A FORWARD -j DOCKER-ISOLATION-STAGE-1" >&3',
-		  '        ;;',
-		  'esac' );
+    add_commands( $chainref, '[ -n "$g_dockernetwork" ] && echo "-A FORWARD -j DOCKER-ISOLATION" >&3', );
 
     if ( my $dockerref = known_interface('docker0') ) {
 	add_commands( $chainref, 'if [ -n "$g_docker" ]; then' );
@@ -715,9 +692,6 @@ sub create_docker_rules() {
 
 sub setup_mss();
 
-#
-# Add rules generated by .conf options and interface options
-#
 sub add_common_rules ( $ ) {
     my ( $upgrade ) = @_;
     my $interface;
@@ -743,7 +717,7 @@ sub add_common_rules ( $ ) {
 
     if ( $config{REJECT_ACTION} ) {
 	process_reject_action;
-	fatal_error( "The REJECT_ACTION ($config{REJECT_ACTION}) is not terminating" ) unless terminating( $rejectref );
+	fatal_eror( "The REJECT_ACTION ($config{REJECT_ACTION}) is not terminating" ) unless terminating( $rejectref );
     } else {
 	if ( have_capability( 'ADDRTYPE' ) ) {
 	    add_ijump $rejectref , j => 'DROP' , addrtype => '--src-type BROADCAST';
@@ -835,7 +809,7 @@ sub add_common_rules ( $ ) {
 		    $dbl_dst_target = $dbl_src_target;
 		}		    
 	    } elsif ( $dbl_level ) {
-		my $chainref = set_optflags( new_standard_chain( $dbl_src_target = $dbl_dst_target = 'dbl_log' ) , DONT_OPTIMIZE | DONT_DELETE );
+		my $chainref = set_optflags( new_standard_chain( $dbl_src_target = 'dbl_log' ) , DONT_OPTIMIZE | DONT_DELETE );
 
 		log_rule_limit( $dbl_level,
 				$chainref,
@@ -1239,53 +1213,55 @@ sub add_common_rules ( $ ) {
 	}
     }
 
-    my $announced = 0;
+    if ( $family == F_IPV4 ) {
+	my $announced = 0;
 
-    $list = find_interfaces_by_option 'upnp';
+	$list = find_interfaces_by_option 'upnp';
 
-    if ( @$list ) {
-	progress_message2 "$doing UPnP";
+	if ( @$list ) {
+	    progress_message2 "$doing UPnP";
 
-	$chainref = set_optflags( new_nat_chain( 'UPnP' ), DONT_OPTIMIZE );
+	    $chainref = set_optflags( new_nat_chain( 'UPnP' ), DONT_OPTIMIZE );
 
-	add_commands( $chainref, '[ -s /${VARDIR}/.UPnP ] && cat ${VARDIR}/.UPnP >&3' );
+	    add_commands( $chainref, '[ -s /${VARDIR}/.UPnP ] && cat ${VARDIR}/.UPnP >&3' );
 
-	my $chainref1;
+	    my $chainref1;
 
-	if ( $config{MINIUPNPD} ) {
-	    $chainref1 = set_optflags( new_nat_chain( 'MINIUPNPD-POSTROUTING' ), DONT_OPTIMIZE ); 
-	    add_commands( $chainref, '[ -s /${VARDIR}/.MINIUPNPD-POSTROUTING ] && cat ${VARDIR}/.MINIUPNPD-POSTROUTING >&3' );
+	    if ( $config{MINIUPNPD} ) {
+		$chainref1 = set_optflags( new_nat_chain( 'MINIUPNPD-POSTROUTING' ), DONT_OPTIMIZE ); 
+		add_commands( $chainref, '[ -s /${VARDIR}/.MINIUPNPD-POSTROUTING ] && cat ${VARDIR}/.MINIUPNPD-POSTROUTING >&3' );
+	    }
+
+	    $announced = 1;
+
+	    for $interface ( @$list ) {
+		add_ijump_extended $nat_table->{PREROUTING} ,            j => 'UPnP',                   get_interface_origin($interface), imatch_source_dev ( $interface );
+		add_ijump_extended $nat_table->{$globals{POSTROUTING}} , j => 'MINIUPNPD-POSTROUTING' , $origin{MINIUPNPD}              , imatch_dest_dev   ( $interface ) if $chainref1;
+	    }
 	}
 
-	$announced = 1;
+	$list = find_interfaces_by_option 'upnpclient';
 
-	for $interface ( @$list ) {
-	    add_ijump_extended $nat_table->{PREROUTING} ,            j => 'UPnP',                   get_interface_origin($interface), imatch_source_dev ( $interface );
-	    add_ijump_extended $nat_table->{$globals{POSTROUTING}} , j => 'MINIUPNPD-POSTROUTING' , $origin{MINIUPNPD}              , imatch_dest_dev   ( $interface ) if $chainref1;
-	}
-    }
+	if ( @$list ) {
+	    progress_message2 "$doing UPnP" unless $announced;
 
-    $list = find_interfaces_by_option 'upnpclient';
+	    for $interface ( @$list ) {
+		my $chainref = $filter_table->{input_option_chain $interface};
+		my $base     = uc var_base get_physical $interface;
+		my $optional = interface_is_optional( $interface );
+		my $variable = get_interface_gateway( $interface, ! $optional );
+		my $origin   = get_interface_origin( $interface );
 
-    if ( @$list ) {
-	progress_message2 "$doing UPnP" unless $announced;
-
-	for $interface ( @$list ) {
-	    my $chainref = $filter_table->{input_option_chain $interface};
-	    my $base     = uc var_base get_physical $interface;
-	    my $optional = interface_is_optional( $interface );
-	    my $variable = get_interface_gateway( $interface, ! $optional );
-	    my $origin   = get_interface_origin( $interface );
-
-	    if ( $optional ) {
-		add_commands( $chainref,
-			      qq(if [ -n "SW_\$${base}_IS_USABLE" -a -n "$variable" ]; then) );
-		incr_cmd_level( $chainref );
-		add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
-		decr_cmd_level( $chainref );
-		add_commands( $chainref, 'fi' );
-	    } else {
-		add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
+		if ( $optional ) {
+		    add_commands( $chainref,
+				  qq(if [ -n "SW_\$${base}_IS_USABLE" -a -n "$variable" ]; then) );
+		    incr_cmd_level( $chainref );
+		    add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
+		    decr_cmd_level( $chainref );
+		    add_commands( $chainref, 'fi' );
+		} else {
+		    add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
+		}
 	    }
 	}
     }
@@ -1298,13 +1274,6 @@ my %maclist_targets = ( ACCEPT => { target => 'RETURN' , mangle => 1 } ,
 			REJECT => { target => 'reject' , mangle => 0 } ,
 			DROP   => { target => 'DROP' ,   mangle => 1 } );
 
-#
-# Create rules generated by the 'maclist' option and by entries in the maclist file.
-#
-# The function is called twice. The first call passes '1' and causes the maclist file
-# to be processed. The second call passes '2' and generates the jumps for 'maclist'
-# interfaces.
-#
 sub setup_mac_lists( $ ) {
 
     my $phase = $_[0];
@@ -1746,9 +1715,9 @@ sub add_interface_jumps {
 	    add_ijump( $filter_table->{input_chain $bridge },
 		       j => $inputref ,
 		       imatch_source_dev( $interface, 1 )
-		) unless $input_jump_added{$interface}   || ! use_interface_chain( $interface, 'use_input_chain' );
+		    ) unless $input_jump_added{$interface}   || ! use_input_chain $interface, $inputref;
 
-	    unless ( $output_jump_added{$interface} || ! use_interface_chain( $interface, 'use_output_chain') ) {
+	    unless ( $output_jump_added{$interface} || ! use_output_chain $interface, $outputref ) {
 		add_ijump( $filter_table->{output_chain $bridge} ,
 			   j => $outputref ,
 			   imatch_dest_dev( $interface, 1 ) )
@@ -1757,10 +1726,10 @@ sub add_interface_jumps {
 	} else {
 	    add_ijump ( $filter_table->{FORWARD}, j => 'ACCEPT', imatch_source_dev( $interface) , imatch_dest_dev( $interface) ) unless $interfaceref->{nets} || ! $interfaceref->{options}{bridge};
 
-	    add_ijump( $filter_table->{FORWARD} , j => $forwardref , imatch_source_dev( $interface ) ) if use_forward_chain( $interface, $forwardref )         && ! $forward_jump_added{$interface}++;
-	    add_ijump( $filter_table->{INPUT}   , j => $inputref ,   imatch_source_dev( $interface ) ) if use_interface_chain( $interface, 'use_input_chain' ) && ! $input_jump_added{$interface}++;
+	    add_ijump( $filter_table->{FORWARD} , j => $forwardref , imatch_source_dev( $interface ) ) if use_forward_chain( $interface, $forwardref ) && ! $forward_jump_added{$interface}++;
+	    add_ijump( $filter_table->{INPUT}   , j => $inputref ,   imatch_source_dev( $interface ) ) if use_input_chain( $interface, $inputref )     && ! $input_jump_added{$interface}++;
 
-	    if ( use_interface_chain( $interface, 'use_output_chain' ) ) {
+	    if ( use_output_chain $interface, $outputref ) {
 		add_ijump $filter_table->{OUTPUT} , j => $outputref , imatch_dest_dev( $interface ) unless get_interface_option( $interface, 'port' ) || $output_jump_added{$interface}++;
 	    }
 	}
@@ -1949,7 +1918,7 @@ sub add_output_jumps( $$$$$$$$ ) {
     my @ipsec_out_match   = match_ipsec_out $zone , $hostref;
     my @zone_interfaces   = keys %{zone_interfaces( $zone )};
 
-    if ( @vservers || use_interface_chain( $interface, 'use_output_chain' ) || ( @{$interfacechainref->{rules}} && ! $chain1ref ) || @zone_interfaces > 1 ) {
+    if ( @vservers || use_output_chain( $interface, $interfacechainref ) || ( @{$interfacechainref->{rules}} && ! $chain1ref ) || @zone_interfaces > 1 ) {
 	#
 	# - There are vserver zones (so OUTPUT will have multiple source; or
 	# - We must use the interface output chain; or
@@ -2083,7 +2052,7 @@ sub add_input_jumps( $$$$$$$$$ ) {
     my @source            = imatch_source_net $net;
     my @ipsec_in_match    = match_ipsec_in  $zone , $hostref;
 
-    if ( @vservers || use_interface_chain( $interface, 'use_input_chain' ) || ! $chain2 || ( @{$interfacechainref->{rules}} && ! $chain2ref ) ) {
+    if ( @vservers || use_input_chain( $interface, $interfacechainref ) || ! $chain2 || ( @{$interfacechainref->{rules}} && ! $chain2ref ) ) {
 	#
 	# - There are vserver zones (so INPUT will have multiple destinations; or
 	# - We must use the interface input chain; or
@@ -2476,14 +2445,11 @@ sub generate_matrix() {
     }
 }
 
-#
-# Generate MSS rules
-#
 sub setup_mss( ) {
     my $clampmss = $config{CLAMPMSS};
     my $option;
     my @match;
-    my $chainref = $mangle_table->{FORWARD};
+    my $chainref = $filter_table->{FORWARD};
 
     if ( $clampmss ) {
 	if ( "\L$clampmss" eq 'yes' ) {
@@ -2589,6 +2555,9 @@ EOF
 	        reload)
 	            mylogger kern.err "ERROR:$g_product reload failed"
 	            ;;
+	        refresh)
+	            mylogger kern.err "ERROR:$g_product refresh failed"
+	            ;;
                 enable)
                     mylogger kern.err "ERROR:$g_product 'enable $g_interface' failed"
                     ;;
@@ -2678,6 +2647,7 @@ EOF
 
         rm -f ${VARDIR}/proxyarp
     fi
+
 EOF
     } else {
 	emit <<'EOF';
@@ -2691,6 +2661,7 @@ EOF
 
         rm -f ${VARDIR}/proxyndp
     fi
+
 EOF
     }