# Checklist
- `nu-ansi-term` remains the same
- [x] `reedline` is released and updated
- [x] release scripts are updated for `nu-cmd-base`
- [x] info blog post is online
- [ ] release notes are ready
- fixes#9501
# Description
`chrono::Datetime::to_rfc2822()` panics when it would format a negative
year. 3339 does not. This makes negative-year datetimes inconsistent
compared to positive ones, but it's better than a panic.
# Description
`derive(EnumIter)` is only required to run completeness tests.
Thus make the derive conditional on test and move `strum` and
`strum_macros` to the dev dependencies.
## Is it worth it?
Removing this derive does not change the binary size (checked via `cargo
bloat --crates` from `cargo-bloat`).
Compile time change is below a second so hard to judge based on a single
run of `cargo clean --profile dev; cargo build --timings`
Unsure if this negatively impacts how incremental compilation can
recompile when you switch between `cargo build`/`run` and `cargo test`
in your local workflow.
To get rid of `strum`/`strum_macros` as a proc macro crate we would need
to also remove it from `reedline`.
Further more a crate in the `polars` dependency tree uses `strum`
(curently not as relevant for the 1.0 build).
# Description
This PR improves the error message if an environment variable (that's
visible before the parser begins) is used in the form of `$PATH` instead
of `$env.PATH`.
Before:
```
Error: nu::parser::variable_not_found
× Variable not found.
╭─[entry #31:1:1]
1 │ echo $PATH
· ──┬──
· ╰── variable not found.
╰────
```
After:
```
Error: nu::parser::env_var_not_var
× Use $env.PATH instead of $PATH.
╭─[entry #1:1:1]
1 │ echo $PATH
· ──┬──
· ╰── use $env.PATH instead of $PATH
╰────
```
# User-Facing Changes
Just the improvement to the error message
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Add `test_examples()` to `use` that verifies its examples. For that, add
the necessary definitions and the `PWD` to the `nu-cmd-lang` test
support.
Note: `let-env` is a `nu-command` and thus not accessible from the
`nu-cmd-lang` tests. So replace `let-env` with `$env.<var> =`. This
should be fine, since `let-env` is supposed to be removed before 1.0
anyway.
# User-Facing Changes
Nothing
# Question for reviewer
Is there any particular reason why so many core commands (parser
keywords) don't verify their examples with tests? E.g. `break`, `hide`,
`overlay use`, etc. (I think most of them?). If there is no particular
reason, I'd make a follow up PR to enable tests for as many of them as
possible.
In the spirit of #9509 we are changing the visibility of the bits
commands
to align with the way they are correctly done in the bytes commands...
Thanks to @sholderbach for pointing out this nice improvement
to me in my PR earlier in the day...
```rust
mod and;
mod bits_;
mod not;
mod or;
mod rotate_left;
mod rotate_right;
mod shift_left;
mod shift_right;
mod xor;
```
- improves usability of datetime's in displayed text
-
# Description
Creates a config point for specifying long / short date time formats.
Defaults to humanized as we have today.
Provides for adding strftime formats into config.nu such as:
```nu
datetime_format: {
normal: "%Y-%m-%d %H:%M:%S"
table: "%Y-%m-%d"
}
```
Example:
```bash
> $env.config.datetime_format
┏━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━┓
┃ normal ┃ %a, %d %b %Y %H:%M:%S %z ┃
┃ table ┃ %m/%d/%y %I:%M:%S%p ┃
┗━━━━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━┛
> let a = (date now)
> echo $a
Thu, 22 Jun 2023 10:21:23 -0700
> echo [$a]
┏━━━┳━━━━━━━━━━━━━━━━━━━━━┓
┃ 0 ┃ 06/22/23 10:21:23AM ┃
┗━━━┻━━━━━━━━━━━━━━━━━━━━━┛
```
# User-Facing Changes
Any place converting a datetime to a user displayed value should be
impacted.
# Tests + Formatting
- `cargo fmt --all -- --check` Done
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` Done
- `cargo test --workspace` Done
- `cargo run -- crates/nu-std/tests/run.nu` Not done - doesn't seem to
work
```bash
> use toolkit.nu # or use an `env_change` hook to activate it automatically
> toolkit check pr
``` - Done
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
# Description
This change adds a new flag to the `str replace` command: `--multiline`,
`-m`. This flag will automatically add the multiline regex flag `(?m)`
to the beginning of the supplied regex, allowing for the `^` and `$`
regex characters to match the beginnings and ends of lines,
respectively.
The main advantage of this addition is to make `str replace` more
closely match sed's default behavior of performing matches per-line with
a simple cli flag as opposed to forcing the user to add the {somewhat
clunky) regex flag themselves. This could be an especially valuable
addition since [`str replace` is listed as an alternative to sed in the
official
documentation](https://www.nushell.sh/book/coming_from_bash.html).
With this change, the following two commands would be functionally
equivalent:
```bash
# bash
printf "non-matching line\n123. one line\n124. another line\n" | sed -r 's/^[0-9]+\. //'
```
```bash
# nu
"non-matching line\n123. one line\n124. another line\n" | str replace -am '^[0-9]+\. ' ''
```
both producing the following output:
```
non-matching line
one line
another line
```
# User-Facing Changes
1. Adds a new flag to the `str replace` command: `--multiline`, `-m`.
# Tests + Formatting
I have update the unit tests to test this flag.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I will submit a PR for all relevant documentation changes as soon as
this PR is approved.
# Description
This PR cleans up the deprecated legacy config options that were
deprecated in nushell version 0.72.0. These are the config points that
were in the root of the config but also duplicated in the nested
structures. For instance `use_ls_colors` was in the root of the config
and also in the `ls.use_ls_colors` nested structure. This was originally
done to preserve backwards compatibility when nested structures were
introduced in the config file.
Here's a list of the legacy config points that were removed.
- `use_ls_colors` - previously replaced with `ls.use_ls_colors`
- `rm_always_trash` - previously replaced with `rm.always_trash`
- `history_file_format` - previously replaced with `history.file_format`
- `sync_history_on_enter` - previously replaced with
`history.sync_on_enter`
- `max_history_size` - previously replaced with `history.max_size`
- `quick_completions` - previously replaced with `completions.quick`
- `partial_completions` - previously replaced with `completions.partial`
- `max_external_completion_results` - previously replaced with
`completions.external.max_results`
- `completion_algorithm` - previously replaced with
`completions.algorithm`
- `case_sensitive_completions` - previously replaced with
`completions.case_sensitive`
- `enable_external_completion` - previously replaced with
`completions.external.enable`
- `external_completer` - previously replaced with
`completions.external.completer`
- `table_mode` - previously replaced with `table.mode`
- `table_index_mode` - previously replaced with `table.index_mode`
- `table_trim` - previously replaced with `table.trim`
- `show_clickable_links_in_ls` - previously replaced with
`ls.clickable_links`
- `cd_with_abbreviations` - previously replaced with `cd.abbreviations`
- `filesize_metric` - previously replaced with `filesize.metric`
- `filesize_format` - previously replaced with `filesize.format`
- `cursor_shape_vi_insert` - previously replaced with
`cursor_shape.vi_insert`
- `cursor_shape_vi_normal` - previously replaced with
`cursor_shape.vi_normal`
- `cursor_shape_emacs` - previously replaced with `cursor_shape.emacs`
Removes log_level from the config since it doesn't do anything any
longer. We moved log-level to a nushell parameter some time ago.
Renames history_isolation to isolation in the config.nu for consistency.
Fixes a couple bugs where values weren't being set in the "//
Reconstruct" sections (history_isolation, table_show_empty).
Reorganized/Moved things around a tiny bit and added a few comments.
# User-Facing Changes
history.histor_isolation is now history.isolation.
If anyone is still using the legacy config points, deprecated since
0.72.0 2022-11-29, their config will break.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
make history.max_size bigger so it doesn't eat history
closes#9493
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
- https://github.com/nushell/nushell/pull/9404
# Description
to support our cratification effort and moving non-1.0 commands outside
of the main focus, this PR
- creates a new `nu-cmd-base` crate to hold the common structs, traits
and functions used by all command-related crates
- to start the transition, moves the `input_handler` module from
`nu-command` to `nu-cmd-base`
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
This splits off `scope` from `$nu`, creating a set of `scope` commands
for the various types of scope you might be interested in.
This also simplifies the `$nu` variable a bit.
# User-Facing Changes
This changes `$nu` to be a bit simpler and introduces a set of `scope`
subcommands.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
- https://github.com/nushell/nushell/pull/8544
cc/ @jntrnr @ahkrr
# Description
some of the tests in the `dots.rs` file are a bit hard to read because
some of the paths look like command calls 🤔
in an attempt to making them easier to read, in the tests of `dots.rs`,
this PR
- replaces `file .../` with `not_a_cmd.../` because it's not a call to
the `file` command
- removes the space in `not_a_cmd .../` to see it's not a command call
- adds a bit more `not a cmd` to the last tests, to be consistent with
the other tests
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
In my view we should revert nushell/nushell#8395 for now
## Potentially inconsistent application of semantic change
#8395 (1d5e7b441b) was loosening the type
coercion rules significantly, to let missing data / void returns that
were either expressed by `PipelineData::Empty` or the `Value::nothing`
be accept by specifically those commands/operations that made use of
`PipelineData::into_iter_strict()`. This could apply the new rules
inconsistently.
## Turning explicit failures into silent continuations
Furthermore the effect of this breaking change to the missing data
semantics could make previous errors into silent failures.
This could either just reduce the effectiveness of teaching error
messages in interactive use:
### Contrived example before
```bash
> cd . | where blah
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #13:1:1]
1 │ cd . | where blah
· ──┬──┬
· │ ╰── input type: null
· ╰── only list, binary, raw data or range input data is supported
╰────
```
### ...after, with #8395
```bash
> cd . | where blah
╭────────────╮
│ empty list │
╰────────────╯
```
In rare cases people could already try to rely on catching an error of a
downstream command to actually deal with the missing data, so it would
be a breaking change for their existing code.
## Problem with `PipelineData::into_iter_strict()`
Maybe this makes `_strict` a bit of a misnomer for this particular
iterator construction.
Further we did not actively test the `PipelineData::empty` branch before
## Parsimonious solution exists
For the motivating issue https://github.com/nushell/nushell/issues/8393
there already exists a fix that makes `ls` more consistent with the type
system by returning an empty `Value::List`
https://github.com/nushell/nushell/pull/8439
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This PR fixes the following nightly clippy warnings.
```
warning: you should consider adding a `Default` implementation for `HjsonFormatter<'a>`
--> crates/nu-json/src/ser.rs:700:5
|
700 | / pub fn new() -> Self {
701 | | HjsonFormatter::with_indent(b" ")
702 | | }
| |_____^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default
= note: `#[warn(clippy::new_without_default)]` on by default
help: try adding this
|
698 + impl<'a> Default for HjsonFormatter<'a> {
699 + fn default() -> Self {
700 + Self::new()
701 + }
702 + }
|
warning: `nu-json` (lib) generated 1 warning
warning: private item shadows public glob re-export
--> crates/nu-command/src/strings/mod.rs:8:1
|
8 | mod str_;
| ^^^^^^^^^
|
note: the name `str_` in the type namespace is supposed to be publicly re-exported here
--> crates/nu-command/src/strings/mod.rs:17:9
|
17 | pub use str_::*;
| ^^^^^^^
note: but the private item here shadows it
--> crates/nu-command/src/strings/mod.rs:8:1
|
8 | mod str_;
| ^^^^^^^^^
= note: `#[warn(hidden_glob_reexports)]` on by default
warning: incorrect NaN comparison, NaN cannot be directly compared to itself
--> crates/nu-command/src/formats/to/nuon.rs:186:20
|
186 | && val != &f64::NAN
| ^^^^^^^^^^^^^^^^
|
= note: `#[warn(invalid_nan_comparisons)]` on by default
help: use `f32::is_nan()` or `f64::is_nan()` instead
|
186 - && val != &f64::NAN
186 + && !val.is_nan()
|
warning: `nu-command` (lib) generated 2 warnings (run `cargo clippy --fix --lib -p nu-command` to apply 1 suggestion)
Compiling nu v0.81.1 (/data/source/nushell)
warning: this expression creates a reference which is immediately dereferenced by the compiler
--> crates/nu-command/tests/commands/rm.rs:392:27
|
392 | dir_to_clean: &test_dir,
| ^^^^^^^^^ help: change this to: `test_dir`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
= note: `#[warn(clippy::needless_borrow)]` on by default
warning: `nu-command` (test "main") generated 1 warning (run `cargo clippy --fix --test "main"` to apply 1 suggestion)
warning: `nu-command` (lib test) generated 2 warnings (2 duplicates)
warning: `nu-json` (lib test) generated 1 warning (1 duplicate)
Finished dev [unoptimized + debuginfo] target(s) in 3.89s
```
# User-Facing Changes
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
this PR should close#9018
# Description
This PR aims to fix the `input` command with `--suppress-output` on
Windows
This fixes two separates issues :
- Keypresses being duplicated in output due to "Release" event not being
ignored
- "Return" event from entering the `input -s "blah :"` still being in
the event buffer (need to be cleared before reading keypresses)
# Tests + Formatting
- `cargo fmt --all -- --check` ✔️
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` ✔️
- `cargo test --workspace` ✔️
- `cargo run -- crates/nu-std/tests/run.nu` ✔️
# Description
In cases that a path contained 3 or more `.` in succession followed by a
path-separator, the dots would be expanded.
This logic didn't take into account the cases where characters other
than a separator could appear before the `...`, which would lead to
`...` in filenames being expanded.
This PR changes the behavior so that path-segments consisting of 3 or
more dots only will be expanded.
This PR fixes issue #8386
# User-Facing Changes
Paths with filenames like `.../folder.../file.txt` will be correctly
expanded.
# Tests + Formatting
I added tests that cover a number of cases.
# Description
This allows empty pipelines to pass their emptiness through a filter.
This helps fix issues like trying to run a filter on an `ls` in an empty
directory. It also feels a bit more reasonable that a filter filters
what is *there* but doesn't require something to be there.
fixes#8393
# User-Facing Changes
No breaking changes (that I know of). Should allow filtering to be a
little less surprising with emptiness.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
Fixes a small bug with `rm` where names of files which couldn't be
deleted due to error were not printed.
Fixes https://github.com/nushell/nushell/issues/9004
# User-Facing Changes
Slightly different error message than previously. Nothing significant,
though.
The new error message looks like this
```
~/Projects/rust/nushell> rm /proc/1/mem 05/06/2023 01:13:23 PM
Error: nu:🐚:remove_not_possible
× Remove not possible
╭─[entry #3:1:1]
1 │ rm /proc/1/mem
· ─────┬─────
· ╰── Could not delete /proc/1/mem: Operation not permitted (os error 1)
╰────
```
or when using a glob (only showing a single entry for brevity)
```
Error: nu:🐚:remove_not_possible
× Remove not possible
╭─[entry #2:1:1]
1 │ rm --recursive --force --verbose /proc/1/*
· ────┬────
· ╰── Could not delete /proc/1/comm: Operation not permitted (os error 1)
╰────
```
# Tests + Formatting
No new unit tests were added for this change as it is pretty difficult
to test this particular case. However, manual testing was run with the
following commands
```
rm /proc/1/mem
rm --recursive --force --verbose /proc/1/*
```
# After Submitting
N/A
This PR reverts https://github.com/nushell/nushell/pull/9391
We try not to revert PRs like this, though after discussion with the
Nushell team, we decided to revert this one.
The main reason is that Nushell, as a codebase, isn't ready for these
kinds of optimisations. It's in the part of the development cycle where
our main focus should be on improving the algorithms inside of Nushell
itself. Once we have matured our algorithms, then we can look for
opportunities to switch out technologies we're using for alternate
forms.
Much of Nushell still has lots of opportunities for tuning the codebase,
paying down technical debt, and making the codebase generally cleaner
and more robust. This should be the focus. Performance improvements
should flow out of that work.
Said another, optimisation that isn't part of tuning the codebase is
premature at this stage. We need to focus on doing the hard work of
making the engine, parser, etc better.
# User-Facing Changes
Reverts the HashMap -> ahash change.
cc @FilipAndersson245
closes https://github.com/nushell/nushell/issues/9437
cc/ @Sygmei 😉
# Description
the syntax of *captures* used in `str replace` can be confusing for
people not used to the `regex` syntax.
there is already a capture example in `help str replace`
```bash
Find and replace with fancy-regex
> 'a successful b' | str replace '\b([sS])uc(?:cs|s?)e(ed(?:ed|ing|s?)|ss(?:es|ful(?:ly)?|i(?:ons?|ve(?:ly)?)|ors?)?)\b' '${1}ucce$2'
a successful b
```
but it's really not trivial to understand the *capture* syntax...
this PR adds a simpler example only focused on *captures*
🥳
```bash
Use captures to manipulate the input text
> "abc-def" | str replace "(.+)-(.+)" "${2}_${1}"
def_abc
```
# User-Facing Changes
an example in `help str replace` to understand the syntax of *captures*.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
Fixes#9448
# Description
Attempts to fix a bug from the linked issue.
# User-Facing Changes
- The editor doesn't crash on wrong commands
# Tests + Formatting
Tests cover my changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Added comments to support API docs for the `nu-plugin` crate. Removed a
few items that I'd expect should only be used internally to Nushell from
the documentation and reduced the visibility of some items that did not
need to be public.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
There should be no user facing impact.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Standard tests run. Additionally numerous doctests were added to the
`nu-plugin` crate.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
No changes to the website necessary.
# Description
When the directory stack contains only two directories, then std dirs
drop
used to misbehave and (essentially) drop the other directory, instead of
dropping the current directory.
This is fixed by always cd'ing for std dirs drop.
Before:
/tmp〉enter ..
/〉dexit
/〉
After:
/tmp〉enter ..
/〉dexit
/tmp〉
Additionally, I propose to explain the relevant environment variables a
bit
more thoroughly.
# User-Facing Changes
- Fix bug in dexit (std dirs drop) when two directories are remaining
# Tests + Formatting
Added a regression test. Made the existing test easier to understand.
Parse the data from string to json if the `--content-type
"application/json"` flag is used for the request.
Fixes: https://github.com/nushell/nushell/issues/9408
In the issue, the actual data is a string `'{ "query": "{ greeting }"
}'` representing json, and it would match the case `Value::String { val,
.. }`
-------------------------
The example in the issue does set the `content-type` to
`application/json` but sends the body as a string note the `'`.
```
(
::: http post
::: -fer
::: # -H [ "Content-Type" "application/json" ]
::: --content-type "application/json"
::: 'http://127.0.0.1:3000/greetings/hello'
::: '{ "query": "{ greeting }" }'
::: )
```
```
╭─────────┬───────────────────────╮
│ headers │ {record 14 fields} │
│ body │ {"content_type":null} │
│ status │ 200 │
╰─────────┴───────────────────────╯
```
If we send the same request but using actual json as the body, the
Header is set correctly.
```
(
::: http post
::: -fer
::: # -H [ "Content-Type" "application/json" ]
::: --content-type "application/json"
::: 'http://127.0.0.1:3000/greetings/hello'
::: { "query": "{ greeting }" }
::: )
```
```
╭─────────┬─────────────────────────────────────╮
│ headers │ {record 14 fields} │
│ body │ {"content_type":"application/json"} │
│ status │ 200 │
╰─────────┴─────────────────────────────────────╯
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
- fixes: #5517
- fixes: #9250
For the following commands:
```
ls
# | le
| length
```
I found that it generates a bad lite parsing result:
```
LiteBlock {
block: [
LitePipeline {
commands: [
Command(None, LiteCommand { comments: [], parts: [Span { start: 138600, end: 138602 }] })
]
},
LitePipeline {
commands: [
Command(Some(Span { start: 138610, end: 138611 }),
LiteCommand { comments: [Span { start: 138603, end: 138609 }], parts: [Span { start: 138612, end: 138618 }] })
]
}
]
}
```
Which should contains only one `LitePipeline`, and the second
`LitePipeline` is generated because of `Eol` lex token:
```
[
Token { contents: Item, span: Span { start: 138600, end: 138602 } },
Token { contents: Eol, span: Span { start: 138602, end: 138603 } }, // it generates the second LitePipeline
Token { contents: Comment, span: Span { start: 138603, end: 138609 } },
Token { contents: Pipe, span: Span { start: 138610, end: 138611 } },
Token { contents: Item, span: Span { start: 138612, end: 138618 } }
]
```
To fix the issue, I remove the `Eol` token when we meet `Comment` right
after `Eol`, then it will generate a good LiteBlock, and everything will
work fine.
### After the fix:
Token:
```
[
Token { contents: Item, span: Span { start: 138618, end: 138620 } },
Token { contents: Comment, span: Span { start: 138622, end: 138628 } },
Token { contents: Pipe, span: Span { start: 138629, end: 138630 } },
Token { contents: Item, span: Span { start: 138631, end: 138637 } }
]
```
LiteBlock:
```
LiteBlock {
block: [
LitePipeline {
commands: [
Command(
None,
LiteCommand {
comments: [Span { start: 138622, end: 138628 }],
parts: [Span { start: 138618, end: 138620 }]
}
),
Command(
Some(Span { start: 138629, end: 138630 }),
LiteCommand { comments: [], parts: [Span { start: 138631, end: 138637 }] })] }] }
```
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
this PR makes nushell use mimalloc as the default allocator, this has
the benefit of reducing startup time on my machine. `17%` on linux and
`22%` on windows, when testing using hyperfine.
the overhead to compile seem to be quite small, aswell as the increase
of binary size quite small
on linux the binary went from `33.1mb` to `33.2mb`
linux
windows
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Make sure that our different crates that contain commands can be
compiled in parallel.
This can under certain circumstances accelerate the compilation with
sufficient multithreading available.
## Details
- Move `help` commands from `nu-cmd-lang` back to `nu-command`
- This also makes sense as the commands are implemented in an
ANSI-terminal specific way
- Make `nu-cmd-lang` only a dev dependency for `nu-command`
- Change context creation helpers for `nu-cmd-extra` and
`nu-cmd-dataframe` to have a consistent api used in
`src/main.rs`:`get_engine_state()`
- `nu-command` now indepedent from `nu-cmd-extra` and `nu-cmd-dataframe`
that are now dependencies of `nu` directly. (change to internal
features)
- Fix tests that previously used `nu-command::create_default_context()`
with replacement functions
## From scratch compilation times:
just debug (dev) build and default features
```
cargo clean --profile dev && cargo build --timings
```
### before
### after
# User-Facing Changes
None direct, only change to compilation on multithreaded jobs expected.
# Tests + Formatting
Tests that previously chose to use `nu-command` for their scope will
still use `nu-cmd-lang` + `nu-command` (command list in the granularity
at the time)
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR removes ZB and ZiB from file size type, as they
were showing incorrect values due to an integer overflow.
Fixes: #9337
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the ini dependency.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Update the polars dependency for dataframes to stay on-version.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
I'm not sure if this is a good idea or now but I did it to fix#9418. It
allows you to pass empty string arguments like this.
file named foo.nu
```
def main [--arg: string = dog] {
if ($arg | is-empty) {
echo "empty string"
} else {
echo $arg
}
}
```
`> nu foo.nu --arg ""`
or
`> nu foo.nu --arg=""`
this gives an error
`> nu foo.nu --arg`
this returns the default argument
`> nu foo.nu`
closes#9418
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is trying to allow you to have `[blah]` in your path and yet
still have `ls` work. This is done by trying to separate the path from
the pattern to be searched for. It may still need more work.
I've tested it with:
- mkdir "[test]"
- cd "[test]"
- ls
Related to #9307
Hopefully fixes#9232
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
close#9335
I am not sure whether the fix was better to be delived as a minor bump
but it is what is is.
Could you @fdncred test it somehow?
I did it by checking out back the the original commit before the PR
refered in the issue.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Makes use of the feature introduced by nushell/reedline#566
If we consider this to be problematic we can decide to add a config
point for this behavior, but at first I was a bit hesistant expanding
the config in this area.
# User-Facing Changes
Follows precedent found in bash/zsh/fish to exclude lines starting with
a space from the history.
Like in fish you can still recall the last entry once but it will not be
stored and will be forgotten after the next submitted entry.
# Tests + Formatting
(-)
Just makes it easier to find these commands when using the `help` system
- the `find` command already has the "regex" search term.
Co-authored-by: ja_cop <ja_cop@hoshi>
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Trying to fix#9394.
The problem with PR #9159 seems to be when searching for multiple terms,
each term is checked against the original values. It outputs a new value
for each such check, thus introducing replication for each search term.
As a result, it works fine with num of search term = 1.
# Description
Test runner now performs following actions in order to run tests:
* Module file is opened
* Public function with random name is added to the source code, this
function calls user-specified private function
* Modified module file is saved under random name in $nu.temp-path
* Modified module file is imported in subprocess, injected function is
called by the test runner
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* Test functions no longer need to be exported
* test functions no longer need to reside in separate test_ files
* setup and teardown renamed to before-each and after-each respectively
* before-all and after-all functions added that run before all tests in
given module. This matches the behavior of test runners used by other
languages such as JUnit/TestNG or Mocha
# Tests + Formatting
# After Submitting
---------
Co-authored-by: Kamil <skelly37@protonmail.com>
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
Adds a new iter feature `zip-into-record` (#9380)
# User-Facing Changes
User can use `[1 2] | iter zip-into-record [3 4]` to create a table `[[1
2]; [3 4]]`
# Tests + Formatting
I noticed trailing spaces in std library that may wish to be cleaned in
the future.
Co-authored-by: amtoine <stevan.antoine@gmail.com>
cc/ @stormasm
# Description
i was about to start the cratification of the 0% commands and thought i
could refactor and simplify a bit the declaration of the `bits`
commands, having hopefully a simpler structure to work with the other
commands 😌
this PR:
- gives real names to all the `bits` commands, instead of `SubCommand`
- make them publicly available inside the `nu-cmd-extra` crate to
declare them through `add_extra_decls`
- move the declaration code to the top-level `mod.nu` of `nu-cmd-extra`
so that all commands can be declared there as in `default_context` in
`nu-command`
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
see https://github.com/nushell/nushell/issues/9390
using `ahash` instead of the default hasher. this will not affect
compile time as we where already building `ahash`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #9218
When user execute some commands involve user input, currently if we
enable `bracketed_paste`, it will results strange behavior (Pasting `0~`
and `1~` around texts, e.g: `aaa` -> `0~aaa1~`) And this is why `gpg`
with paste failed.
Sorry that it's hard to make relative testing...
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
It's not a good idea to save `stdout` and `stderr` to the same file from
`save` command directly.
Because it saves `stdout` and `stderr` in different thread, which leads
to in-consistent output. As replace, we can use `o+e` redirection to fix
the issue
# User-Facing Changes
```
❯ do -i { "aa" } | save foo.txt -e foo.txt
Error: × input and stderr input to same file
╭─[entry #3:1:1]
1 │ do -i { "aa" } | save foo.txt -e foo.txt
· ───┬───
· ╰── can't save both input and stderr input to the same file
╰────
help: you should use `o+e> file` instead
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #9293
The problem is caused by `save` makes a `BufferWriter` for output file,
when external commands redirect it's output to a file, the content is
bufferred first...
To fix the issue, I'd like to introduce a `--no-buf` flag for `save`
command, and it's only used in redirection scenario.
Sorry it's hard to test against it in test, because it requires external
command to sleep or pause...
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
closes: #9344
Different to other http commands, `http options` command always returns
header, according to
[MDN](https://developer.mozilla.org/en-US/docs/Web/HTTP/Methods/OPTIONS),
the response information is included in header.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix for #9347
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- [x] Add unit tests
- [x] Run all cargo tests + fmt commands
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
`cargo +stable check` was complaining about ambiguous wildcard
reexports. Fixed by making the reexport of modules not pub as only the
explicitly named symbols are actually needed in the current state.
# User-Facing Changes
None
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
I have (hopefully) simplified the `log.nu` internal structure and added
customizable log format for all `log` commands
# User-Facing Changes
- [x] Replaced constants with env records for:
- ansi (newly added)
- log level
- prefix
- short prefix
- [x] Added `format` argument to all log commands
- [x] Assertions for (not) equality (equal, not equal, greater,
lesser...) now put left and right values inside `'` quotes, so the
assertions for strings are more meaningful
- [x] Documented the %-formatting of log messages
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
closes#9348
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
In keeping with our tradition of staying 2 versions behind the latest
rust compiler version, this PR bump the toolchain to 1.68.2.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This change allows you to have a list of exclude globs such as:
```
glob **/* --not [**/target/** **/.git/**]
```
TODO: Allow the input glob to be multiples too with
`wax::any(patterns)?`
The breaking change part is that the excludes have to be supplied as a
list, between [ and ].
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This change introduces new `search_result` style supported in the color
config. The change also removes obsolete check for `config.ls_colors`
for computing the style. `config.ls_colors` has been removed last year,
so this removes the reference to the obsolete flag, along with a cleanup
that removes all the code that used to rely on ls_colors for
highlighting search results.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds some tests that were generated in GitHub Copilot Chat
Preview. I was just playing around and figured that more tests couldn't
hurt.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
We needed to include the nu-cmd-extra crate in the version command's
features...
In the style of this PR which fixed the dataframe feature upon adding
the nu-cmd-dataframe crate...
https://github.com/nushell/nushell/pull/9262
I wanted to get the infrastructure in place for starters for our
*nu-cmd-extra* crate...
The plan is to put inside here the following commands...
* bits
* bytes
* math
I thought it would be easier to do one at a time as well as get the
nu-cmd-extra crate out there on crates.io
for this upcoming release...
Once this lands the infrastructure will be in place to move over the
other noted commands for now...
And then add other stuff we do NOT want to be in 1.0.
Adding more float constants for when
https://github.com/rust-lang/rust/issues/103883 is accepted and merged.
And fixing a small conflation in the description of the Euler number.
Please take a look and let me know if I've missed or screwed up
anything.
# Description
Improves the output when running `input list` on tabular data by
aligning each column.
# User-Facing Changes
## Before
## After
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #9165
It's because `sys` returns a lazy record, and `insert`, `update`,
`upsert` can't operate on lazy record yet.
# User-Facing Changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Today the only way to extract date parts from a dfr series is the dfr
get-* set of commands. These create a new dataframe with just the
datepart in it, which is almost entirely useless. As far as I can tell
there's no way to append it as a series in the original dataframe. In
discussion with fdncred on Discord we decided the best route was to add
an expression for modifying columns created in dfr with-column. These
are the way you manipulate series within a data frame.
I'd like feedback on this approach - I think it's a fair way to handle
things. An example to test it would be:
```[[ record_time]; [ (date now)]] | dfr into-df | dfr with-column [ ((dfr col record_time) | dfr datepart nanosecond | dfr as "ns" ), (dfr col record_time | dfr datepart second | dfr as "s"), (dfr col record_time | dfr datepart minute | dfr as "m"), (dfr col record_time | dfr datepart hour | dfr as "h") ]```
I'm also proposing we deprecate the dfr get-* commands. I've not been able to figure out any meaningful way they could ever be useful, and this approach makes more sense by attaching the extracted date part to the row in the original dataframe as a new column.
<!--
Thank you for improving Nushell. Please, check our [contributing guide](../CONTRIBUTING.md) and talk to the core team before making major changes.
Description of your pull request goes here. **Provide examples and/or screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
add in dfr datepart as an expression
<!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. -->
# Tests + Formatting
Need to add some better assertive tests. I'm also not sure how to properly write the test_dataframe at the bottom, but will revisit as part of this PR. Wanted to get feedback early.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
---------
Co-authored-by: Robert Waugh <robert@waugh.io>
# Description
This PR restores cursor shape when nushell exists.
Fixes#9243
Related
[nushell/reedline#574](https://github.com/nushell/reedline/pull/574)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* windows
https://github.com/nushell/nushell/assets/15247421/ede8d1c0-ecd1-40b0-87b0-6393c1a7160f
* linux
https://github.com/nushell/nushell/assets/15247421/b428f17e-05cb-45ad-aa5f-3a9753fd9176
* macos
https://github.com/nushell/nushell/assets/15247421/5170dabd-8b9f-4bad-a7a2-bdabfca45cca
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to the namespace bullet point in
- https://github.com/nushell/nushell/issues/8450
# Description
this was the last module of the standard library with a broken
namespace, this PR takes care of this.
- `run-tests` has been moved to `std/mod.nu`
- `std/testing.nu` has been moved to `std/assert.nu`
- the namespace has been fixed
- `assert` is now called `main` and used in all the other `std assert`
commands
- for `std assert length` and `std assert str contains`, in order not to
shadow the built-in `length` and `str contains` commands, i've used
`alias "core ..." = ...` to (1) define `foo` in `assert.nu` and (2)
still use the builtin `foo` with `core foo` (replace `foo` by `length`
or `str contains`)
- tests have been fixed accordingly
# User-Facing Changes
one can not use
```
use std "assert equal"
```
anymore because `assert ...` is not exported from `std`.
`std assert` is now a *real* module.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Notes for reviewers
to test this, i think the easiest is to
- run `toolkit test stdlib` and see all the tests pass
- run `cargo run -- -n` and try `use std assert` => are all the commands
available in scope?
# Description
The old description ("Nushell table printing") is identical to that of
`nu-table`. Per `explore --help` it is probably more accurate to say
"Nushell table pager".
# User-Facing Changes
N/A
# Tests + Formatting
```
❯ cargo metadata --no-deps | from json | get packages | get 14 | get description
warning: please specify `--format-version` flag explicitly to avoid compatibility problems
Nushell table pager
```
# After Submitting
N/A - change will go out when `0.82.0` is released
Signed-off-by: Michel Alexandre Salim <salimma@fedoraproject.org>
# Description
This PR updates most dependencies and tries to get in sync with
reedline.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
in order to write tests for the `std help` commands, as we currently
have in the Rust source base, we need to be able to manipulate the
output of the `std help` commands.
however, until now they've all been directly printing the help pages as
they go...
this PR tries to build the help pages and return them at the end instead
of printing them on the fly 👍
> **Note**
> this is quite a rewrite of the `help.nu` module 🤔
> i think it might be best to either
> - look at the commits in order
> - test the changes by testing the commands in the REPL and comparing
them to their previous `std help` versions
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Add "os record" support.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
This don't change how path add works but just adds support for "os
records" aka records whose key are at least one of:
- linux
- macos
- windows
Check the
[test](a917f1a924/crates/nu-std/tests/test_std.nu (L31-L32))
if that's not clear enough
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
I don't want to rm my home again.. sadly..
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
check if there is unique argument
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
user will not easily rm their home
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Moves us over to dogfooding the git version of reedline ahead of the
next release.
# User-Facing Changes
With luck, you should see fewer bugs :D
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes the clippy warnings we're about to get hit with next time we
upgrade Rust.
The big one was shrinking ShellError and related under 128 bytes.
# User-Facing Changes
Shouldn't notice much difference. In theory, we could see a tiny perf
improvement, but I didn't notice one.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This removes some unnecessary SyntaxShapes when parsing a
SyntaxShape::Any. Recent updates to the parser look for `{` and then
handle the logic for that separately.
# User-Facing Changes
This may have a slight parser speedup.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR cleans a couple things up. Nothing major, just a few things that
caught my eye looking for something else.
1. less macros
2. hidden and italic styles weren't fully available
3. lookup_color function didn't lookup all the colors available
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes https://github.com/nushell/nushell/issues/9229.
Supersedes #9234
The reported problem was that `shells` list of active shells (a.k.a `std
dirs show` would show an inaccurate active
working directory if user changed it via `cd` command.
The fix here is for the `std dirs` module to let `$env.PWD` mask the
active slot of `$env.DIRS_LIST`. The user is free to invoke CD (or write
to `$env.PWD`) and `std dirs show` will display that as the active
working directory.
When user changes the active slot (via `n`, `p`, `add` or `drop`) `std
dirs` remembers the then current PWD in the about-to-be-vacated active
slot in `$env.DIRS_LIST`, so it is there if you come back to that slot.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None. It just works™️
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> [x] use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
I was trying `-H [key-A val-A] -H [key-B val-B]` but thanks to @Dorumin
I discovered how it should be used.
This PR just adds an extra example to the help with multiple headers.
Feel free to edit it either to merge both header examples into one or
rename the key value used, but I think it would be nice to have a sample
as the multiple -H variant doesn't error out it wasn't obvious to me.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
One more help example in `help http get`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes#9254.
# User-Facing Changes
upserting data of a cellpath that doesn't exist into a record now
creates the cellpath.
# Tests + Formatting
```
~/CodingProjects/nushell> mut a = {}
~/CodingProjects/nushell> $a.b.c = 99
~/CodingProjects/nushell> $a
╭───┬────────────╮
│ │ ╭───┬────╮ │
│ b │ │ c │ 99 │ │
│ │ ╰───┴────╯ │
╰───┴────────────╯
```
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Addresses missing features per #9261
# User-Facing Changes
Fixes output of version. Adds wasi feature output
# Tests + Formatting
No tests written
Co-authored-by: Robert Waugh <robert@waugh.io>
# Description
Closes: #7853
I found that I want this feature too...
So I take over it, sorry for that @VincenzoCarlino
# User-Facing Changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to the changes in
- #9193
# Description
when we change the namespace of a module, the internal calls to the
`export`ed commands needs to be updated as well 👀😆
without this, we have the following pretty error:
```
> std help ansi
Error: × std::help::item_not_found
╭─[entry #1:1:1]
1 │ std help ansi
· ──┬─
· ╰── item not found
╰────
```
# Description
Fixes#8896. Also went back and cleaned up the code slightly.
# User-Facing Changes
`view-source` now is more comprehensive when viewing definitions.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes#9217 (some cases, still can't accept all default expressions)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Follow-up of #8940, expanding `eval_constant` so that it can also
evaluate values with units.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- A unit test was added to verify that defaults like `1sec` are
accepted.
# Description
Title; fixes#9208.
# User-Facing Changes
`input` now can specify a certain number of characters to read.
# Tests + Formatting
No CI tests; can't find a way to implement.
```
~/CodingProjects/nushell> let user_input = (input --numchar 2)
~/CodingProjects/nushell> echo $user_input
te
```
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
All of the dataframe commands ported over with no issues...
### 11 tests are commented out (for now)
So 100 of the original 111 tests are passing with only 11 tests being
ignored for now..
As per our conversation in the core team meeting on Wednesday
I took @jntrnr suggestion and just commented out the tests dealing
with
[IntoDatetime](https://github.com/nushell/nushell/blob/main/crates/nu-command/src/conversions/into/mod.rs)
Later on we can move this functionality out of nu-command if we decide
it makes sense...
### The following tests were ignored...
```rust
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_day.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_hour.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_minute.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_month.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_nanosecond.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_ordinal.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_second.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_week.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_weekday.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_year.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/string/strftime.rs
```
# Description
A new command to simplify assertions for `false`.
The name is just a draft, though I could not come up with a better name.
I have rejected `assert false`, because I would have to rename `assert`
to `assert true` which would break the compatibility and worsen the
shell experience of the good old `assert`.
Another idea I have rejected was something like `assert_false` to keep
it consistent with the naming convention of our stdlib.
I am open to suggestions :)
# User-Facing Changes
Just a new command
# Tests + Formatting
- [x] Done
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is a test PR to see if we can remove dependencies. The crates to
remove was generated from cargo machete. If ci works, I'll update the PR
to remove deps instead of comment them out.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
`ansi strip` (used in the clip command by default) removes tab symbols,
which is sometimes not useful (for example, when using the `[[a b]; [1
2]] | to tsv | clip` command). Therefore, I added a flag to prevent
using `ansi strip` in the clip command.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
PATH and Path are different (in nushell at least) based on the OS
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None the command now works as expected
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Cleans up various tests that unnecessarily use the `cwd` argument of
`nu!`, and the `pipeline` function for single line commands. Also
replaces some unnecessary raw strings with normal strings. Part of
#8670.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
All checks pass
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
closes#9111
# Description
this pr improves parsing of values with units (`filesizes`, `durations`
and any other **future values**) by:
1. allowing underscores in the value part
```nu
> 42kb # okay
> 42_sec # okay
> 1_000_000mib # okay
> 69k_b # not okay, underscores not allowed in the unit
```
2. improving error messages involving these values
```nu
> sleep 40-sec
# before
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #42:1:1]
1 │ sleep 40-sec
· ──┬──
· ╰── expected duration with valid units
╰────
# now
Error:
× duration value must be a number
╭─[entry #41:1:1]
1 │ sleep 40-sec
· ─┬─
· ╰── not a number
╰────
```
3. unifying parsing of these values. now all of these use one function
# User-Facing Changes
filesizes and durations can now have underscores for readability
# Description
Despite the innocent-looking title, this PR involves quite a few backend
changes as the existing LazyRecord trait was not at all friendly towards
the idea of these values being generated on the fly from Nu code.
In particular, here are a few changes involved:
- The LazyRecord trait now involves a lifetime `'a`, and this lifetime
is used in the return value of `get_column_names`. This means it no
longer returns `'static str`s (but implementations still can return
these). This is more stringent on the consumption side.
- The LazyRecord trait now must be able to clone itself via a new
`clone_value` method (as requiring `Clone` is not object safe). This
pattern is borrowed from `Value::CustomValue`.
- LazyRecord no longer requires being serde serializable and
deserializable.
These, in hand, allow for the following:
- LazyRecord can now clone itself, which means that they don't have to
be collected into a Record when being cloned.
- This is especially useful in Stack, which is cloned on each repl line
and in a few other cases. This would mean that _every_ LazyRecord
instance stored in a variable would be collected in its entirety and
cloned, which can be catastrophic for performance. See: `let nulol =
$nu`.
- LazyRecord's columns don't have to be static, they can have the same
lifetime of the struct itself, so different instances of the same
LazyRecord type can have different columns and values (like the new
`NuLazyRecord`)
- Serialization and deserialization are no longer meaningless, they are
simply less.
I would consider this PR very "drafty", but everything works. It
probably requires some cleanup and testing, though, but I'd like some
eyes and pointers first.
# User-Facing Changes
New command. New restrictions are largely internal. Maybe there are some
plugins affected?
Example of new command's usage:
```
lazy make --columns [a b c] --get-value { |name| print $"getting ($name)"; $name | str upcase }
```
You can also trivially implement something like `lazy make record` to
take a record of closures and turn it into a getter-like lazy struct:
```
def "lazy make record" [
record: record
] {
let columns = ($record | columns)
lazy make --columns $columns --get-value { |col| do ($record | get $col) }
}
```
Open to bikeshedding. `lazy make` is similar to `error make` which is
also in the core commands. I didn't like `make lazy` since it sounded
like some transformation was going on.
# Tour for reviewers
Take a look at LazyMake's examples. They have `None` as the results, as
such they aren't _really_ correct and aren't being tested at all. I
didn't do this because creating the Value::LazyRecord is a little tricky
and didn't want to risk messing it up, especially as the necessary
variables aren't available when creating the examples (like stack and
engine state).
Also take a look at NuLazyRecord's get_value implementation, or in
general. It uses an Arc<Mutex<_>> for the stack, which must be accessed
mutably for eval_block but get_value only provides us with a `&self`.
This is a sad state of affairs, but I don't know if there's a better
way.
On the same code path, we also have pipeline handling, and any pipeline
that isn't a Pipeline::Value will return Value::nothing. I believe
returning a Value::Error is probably better, or maybe some other
handling. Couldn't decide on which ShellError to settle with for that
branch.
The "unfortunate casualty" in the columns.rs file. I'm not sure just how
bad that is, though, I simply had to fight a little with the borrow
checker.
A few leftover comments like derives, comments about the now
non-existing serde requirements, and impls. I'll definitely get around
to those eventually but they're in atm
Should NuLazyRecord implement caching? I'm leaning heavily towards
**yes**, this was one of the main reasons not to use a record of
closures (besides convenience), but maybe it could be opt-out. I'd
wonder about its implementation too, but a simple way would be to move a
HashMap into the mutex state and keep cached values there.
Closes#9003.
This PR changes `group-by` so that its optional argument is interpreted
as a cell path. In turn, this lets users use `?` to ignore rows that are
missing the column they wish to group on. For example:
```
> [{foo: 123}, {foo: 234}, {bar: 345}] | group-by foo
Error: nu:🐚:column_not_found
× Cannot find column
╭─[entry #3:1:1]
1 │ [{foo: 123}, {foo: 234}, {bar: 345}] | group-by foo
· ─────┬──── ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
> [{foo: 123}, {foo: 234}, {bar: 345}] | group-by foo?
╭─────┬───────────────╮
│ 123 │ [table 1 row] │
│ 234 │ [table 1 row] │
╰─────┴───────────────╯
```
~~This removes the ability to pass `group-by` a closure or block (I
wasn't able to figure out how to make the 2 features coexist), and so it
is a breaking change. I think this is OK; I didn't even know `group-by`
could accept a closure or block because there was no example for that
functionality.~~
# Description
Fixes: #8565
Here is another pr #7240 tried to address the issue, but it works in a
wrong way.
After this change `o+e>` won't redirect all stdout message then stderr
message and it works more like how bash does.
# User-Facing Changes
For the given python code:
```python
# test.py
import sys
print('aa'*300, flush=True)
print('bb'*999999, file=sys.stderr, flush=True)
print('cc'*300, flush=True)
```
Running `python test.py out+err> a.txt` shoudn't hang nushell, and
`a.txt` keeps output in the same order
## About the change
The core idea is that when doing lite-parsing, introduce a new variant
`LiteElement::SameTargetRedirection` if we meet `out+err>` redirection
token(which is generated by lex function),
During converting from lite block to block,
LiteElement::SameTargetRedirection will be converted to
PipelineElement::SameTargetRedirection.
Then in the block eval process, if we get
PipelineElement::SameTargetRedirection, we'll invoke `run-external` with
`--redirect-combine` flag, then pipe the result into save command
## What happened internally?
Take the following command as example:
`^ls o+e> log.txt`
lex parsing result(`Tokens`) are not changed, but `LiteBlock` and
`Block` is changed after this pr.
### LiteBlock before
```rust
LiteBlock {
block: [
LitePipeline { commands: [
Command(None, LiteCommand { comments: [], parts: [Span { start: 39041, end: 39044 }] }),
// actually the span of first Redirection is wrong too..
Redirection(Span { start: 39058, end: 39062 }, StdoutAndStderr, LiteCommand { comments: [], parts: [Span { start: 39050, end: 39057 }] }),
]
}]
}
```
### LiteBlock after
```rust
LiteBlock {
block: [
LitePipeline {
commands: [
SameTargetRedirection {
cmd: (None, LiteCommand { comments: [], parts: [Span { start: 147945, end: 147948}]}),
redirection: (Span { start: 147949, end: 147957 }, LiteCommand { comments: [], parts: [Span { start: 147958, end: 147965 }]})
}
]
}
]
}
```
### Block before
```rust
Pipeline {
elements: [
Expression(None, Expression {
expr: ExternalCall(Expression { expr: String("ls"), span: Span { start: 39042, end: 39044 }, ty: String, custom_completion: None }, [], false),
span: Span { start: 39041, end: 39044 },
ty: Any, custom_completion: None
}),
Redirection(Span { start: 39058, end: 39062 }, StdoutAndStderr, Expression { expr: String("out.txt"), span: Span { start: 39050, end: 39057 }, ty: String, custom_completion: None })] }
```
### Block after
```rust
Pipeline {
elements: [
SameTargetRedirection {
cmd: (None, Expression {
expr: ExternalCall(Expression { expr: String("ls"), span: Span { start: 147946, end: 147948 }, ty: String, custom_completion: None}, [], false),
span: Span { start: 147945, end: 147948},
ty: Any, custom_completion: None
}),
redirection: (Span { start: 147949, end: 147957}, Expression {expr: String("log.txt"), span: Span { start: 147958, end: 147965 },ty: String,custom_completion: None}
}
]
}
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, when I run clippy locally, I get something like following
warning:
<img width="1383" alt="Screenshot 2023-05-15 at 22 34 57"
src="https://github.com/nushell/nushell/assets/22256154/4d4254bc-9e42-437e-9169-d15e9a97aa57">
This pr is going to fix it
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
…ses).
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
See title.
Fixes#9154
(despite name of branch)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
n/a
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> [x] toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Bump nushell to 0.80.1 development version
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Related to #8368.
# Description
as planned in #8311, the `enter`, `shells`, `g`, `n` and `p` commands
have been re-implemented in pure-`nushell` in the standard library.
this PR removes the `rust` implementations of these commands.
- all the "shells" tests have been removed from
`crates/nu-commnand/tests/commands/` in
2cc6a82da6, except for the `exit` command
- `cd` does not use the `shells` feature in its source code anymore =>
that does not change its single-shell behaviour
- all the command implementations have been removed from
`crates/nu-command/src/shells/`, except for `exit.rs` => `mod.rs` has
been modified accordingly
- the `exit` command now does not compute any "shell" related things
- the `--now` option has been removed from `exit`, as it does not serve
any purpose without sub-shells
# User-Facing Changes
users may now not use `enter`, `shells`, `g`, `n` and `p`
now they would have to use the standard library to have access to
equivalent features, thanks to the `dirs.nu` module introduced by @bobhy
in #8368
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
the website will have to be regenerated to reflect the removed commands
👍
related to
- #9101
- #9039
# Description
i actually forgot to fix in #9039 the new "*item*" introduced by
#9101... 👀
there it is 😇
# User-facing changes
going from
```
> std help git-commiteuwqi
Help pages from external command git-commiteuwqi:
No manual entry for git-commiteuwqi
Error:
× std::help::item_not_found
╭─[help:721:1]
721 │
722 │ let item = ($item | str join " ")
· ─┬─
· ╰── item not found
723 │
╰────
```
to
```
> std help git-commiteuwqi
Help pages from external command git-commiteuwqi:
No manual entry for git-commiteuwqi
Error:
× std::help::item_not_found
╭─[entry #2:1:1]
1 │ std help git-commiteuwqi
· ───────┬───────
· ╰── item not found
╰────
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
Description: Fix of #8945.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: jpaldino <jpaldino@zaloni.com>
# Description
closes#8934
this pr improves the diagnostic emitted when the name and parameters of
either `def`, `def-env` or `extern` are not separated by a space
```nu
Error:
× no space between name and parameters
╭─[entry #1:1:1]
1 │ def err[] {}
· ▲
· ╰── expected space
╰────
help: consider adding a space between the `def` command's name and its parameters
```
from
```nu
Error: nu::parser::missing_positional
× Missing required positional argument.
╭─[entry #1:1:1]
1 │ def err[] {}
╰────
help: Usage: def <def_name> <params> <body>
```
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: Jelle Besseling <jelle@pingiun.com>
This does part of the work of porting to polars 0.29.
However, I am not familiar enough with this part of the codebase to
finish it.
Things to be done:
- We match two times over `polars::Expr` but `Expr::Cache` isn't
handled. I don't know what should be done here
- `ArgExpr:::List` was renamed to `ArgExpr::Implode`. Does that mean
that `dfr list` should be renamed to `dfr implode`?
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Change the parser a little bit so it does less allocations when it's
parsing, specifically when parsing lists/tables
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes the `create_left_prompt` custom command to work with
Windows.
Before:
After:
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
(*third* try at posting this PR, #9104, like #9084, got polluted with
unrelated commits. I'm never going to pull from the github feature
branch again!)
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Show parameter defaults in scope command signature, where they're
available for display by help.
per https://github.com/nushell/nushell/issues/8928.
I found unexpected ramifications in one completer (NuHelpCompleter) and
plugins, which both use the flag-formatting routine from builtin help.
For the moment I made the minimum necessary changes to get the mainline
scenario to pass tests and run. But we should circle back on what to do
with plugins and help completer..
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
1. New `parameter_default` column to `signatures` table in
`$nu.scope.commands`
It is populated with whatever parameters can be defaulted: currently
positional args and named flags.
2. Built in help (both `help <command>` and `<command> --help` will
display the defaults
3. Help completer will display defaults for flags, but not for
positionals.
Example:
A custom command with some default parameters:
```
〉cat ~/work/dflts.nu
# sample function to show defaults in help
export def main [
arg1: string # mandatory positional
arg2:string=abc # optional positional
--switch # no default here
--named:int # named flag, no default
--other:string=def # flag
--hard:record<foo:int bar:string, bas:bool> # default can be compound type
= {foo:22, bar:"other worlds", bas:false}
] { {arg1: $arg1,
arg2: $arg2,
switch: $switch,
named: $named,
other: $other,
hard: $hard, }
}
〉use ~/work/dflts.nu
〉$nu.scope.commands | where name == 'dflts' | get signatures.0.any | reject short_flag description custom_completion
╭───┬────────────────┬────────────────┬──────────────────────────────────────────┬─────────────┬───────────────────────────╮
│ # │ parameter_name │ parameter_type │ syntax_shape │ is_optional │ parameter_default │
├───┼────────────────┼────────────────┼──────────────────────────────────────────┼─────────────┼───────────────────────────┤
│ 0 │ │ input │ any │ false │ │
│ 1 │ arg1 │ positional │ string │ false │ │
│ 2 │ arg2 │ positional │ string │ true │ abc │
│ 3 │ switch │ switch │ │ true │ │
│ 4 │ named │ named │ int │ true │ │
│ 5 │ other │ named │ string │ true │ def │
│ 6 │ hard │ named │ record<foo: int, bar: string, bas: bool> │ true │ ╭───────┬───────────────╮ │
│ │ │ │ │ │ │ foo │ 22 │ │
│ │ │ │ │ │ │ bar │ other worlds │ │
│ │ │ │ │ │ │ bas │ false │ │
│ │ │ │ │ │ ╰───────┴───────────────╯ │
│ 7 │ │ output │ any │ false │ │
╰───┴────────────────┴────────────────┴──────────────────────────────────────────┴─────────────┴───────────────────────────╯
〉help dflts
sample function to show defaults in help
Usage:
> dflts {flags} <arg1> (arg2)
Flags:
--switch - switch -- no default here
--named <Int> - named flag, typed, but no default
--other <String> - flag with default (default: 'def')
--hard <Record([("foo", Int), ("bar", String), ("bas", Boolean)])> - default can be compound type (default: {foo: 22, bar: 'other worlds', bas: false})
-h, --help - Display the help message for this command
Parameters:
arg1 <string>: mandatory positional
arg2 <string>: optional positional (optional, default: 'abc')
```
Compared to (relevant bits of) help output previously:
```
Flags:
-h, --help - Display the help message for this command
-, --switch - no default here
-, --named <int> - named flag, no default
-, --other <string> - flag
-, --hard <record<foo: int, bar: string, bas: bool>> - default can be compound type
Signatures:
<any> | dflts <string> <string> -> <any>
Parameters:
arg1 <string>: mandatory positional
(optional) arg2 <string>: optional positional
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> [x] toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes issue #9043 where find -v was returning empty tables
and/or wrong output.
It also refactors some big code chunks with repetitions into it's own
functions.
# User-Facing Changes
# Tests + Formatting
Unit tests added for asserting changes.
# After Submitting
# Description
this pr adds the following commands to `std iter`
- `iter find-index` -> returns the index of the first element that
matches the predicate or `-1` if none
- `iter flat-map` -> maps a closure to each nested structure and
flattens the result
- `iter zip-with` -> zips two structures and applies a closure to each
of the zips
it also fixes some \*\*very minor\*\* inconsistencies in the module
Related to:
- #8311
- #8353
# Description
with the new `$nu.startup-time` from #8353 and as mentionned in #8311,
we are now able to fully move the `nushell` banner from the `rust`
source base to the standard library.
this PR
- removes all the `rust` source code for the banner
- rewrites a perfect clone of the banner to `std.nu`, called `std
banner`
- call `std banner` from `default_config.nu`
# User-Facing Changes
see the demo: https://asciinema.org/a/566521
- no config will show the banner (e.g. `cargo run --release --
--no-config-file`)
- a custom config without the `if $env.config.show_banner` block and no
call to `std banner` would never show the banner
- a custom config with the block and `config.show_banner = true` will
show the banner
- a custom config with the block and `config.show_banner = false` will
NOT show the banner
# Tests + Formatting
a new test line has been added to `tests.nu` to check the length of the
`std banner` output.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
```
$nothing
```
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR adds the ability to add a negation glob.
Normal Example:
```
> glob **/tsconfig.json
╭───┬────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ 0 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\client\node_modules\big-integer\tsconfig.json │
│ 1 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\client\tsconfig.json │
│ 2 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\node_modules\fastq\test\tsconfig.json │
│ 3 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\node_modules\jszip\tsconfig.json │
│ 4 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\server\tsconfig.json │
│ 5 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\tsconfig.json │
╰───┴────────────────────────────────────────────────────────────────────────────────────────────────────────╯
```
Negation Example:
```
> glob **/tsconfig.json --not **/node_modules/**
╭───┬───────────────────────────────────────────────────────────────────────────────╮
│ 0 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\client\tsconfig.json │
│ 1 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\server\tsconfig.json │
│ 2 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\tsconfig.json │
╰───┴───────────────────────────────────────────────────────────────────────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This change ensures that the ordering of map keys when reading YAML
files is consistent. Previously a `HashMap` was used to store the
mappings, but that would result in non-deterministic ordering of the
keys. Switching to an `IndexMap` fixes this.
Fixes https://github.com/nushell/nushell/issues/8662
# User-Facing Changes
User's can rely on consistent ordering of map keys from YAML.
# Tests + Formatting
A unit test ensuring the ordering has been added.
# After Submitting
None.
# Description
Use `buffer.len()` instead of `cursor_pos`, so the `.expect()` isn't
useless.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
when running `nushell` with the `--no-config-file` option, the left
prompt does not have a space to separate the directory path from the
user input.
in this PR i add a space there to make the prompt easier to read when
using `--no-config-file`!
# User-Facing Changes
before: https://asciinema.org/a/581733
after: https://asciinema.org/a/581734
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
