# Description
Dividing two ints can currently return either an int or a float. Not
having a single return type for an operation between two types seems
problematic. Additionally, the type signature for division says that
dividing two ints returns only an int which does not match the current
implementation (it can also return a float). This PR changes division
between almost all types to return a float (except for `filesize /
number` or `duration / number`, since there are no float representations
for these types).
Currently, floor division between certain types is not implemented even
though the type signature allows it. Also, the current implementation of
floor division uses a combination of clamping and flooring rather than
simply performing floor division which this PR fixes. Additionally, the
signature was changed so that `int // float`, `float // int`, and `float
// float` now return float instead of int. This matches the automatic
float promotion in the rest of the operators (as well as how Python does
floor division which I think is the original inspiration).
Since regular division has always returned fractional values (and now
returns a float to reflect that), `mod` is now defined in terms of floor
division. That is, `D // d = q`, `D mod d = r`, and `D = d * q + r `.
This is just like the `%` operator in Python, which is also based off
floor division (at least for ints and floats). Additionally,
implementations missing from `mod`'s current type signature have been
added (`duration mod int` and `duration mod float`).
This PR also overhauls the overflow checking and errors for div, mod,
and floor div. If an operation overflows, it will now cause an error.
# User-Facing Changes
- Div now returns a float in most cases.
- Floor division now actually does floor division.
- Floor division now does automatic float promotion, returning a float
in more instances.
- Floor division now actually allows division with filesize and
durations as its type signature claimed.
- Mod is now defined and implemented in terms of floor division rather
than truncating division.
- Mod now actually allows filesize and durations as its type signature
claimed.
- Div, mod, and floor div now all have proper overflow checks.
## Examples
When the divisor and the dividend have the same sign, the quotient and
remainder will be the same as before. (Except that this PR will give
more accurate results, since it does not do an intermediate float
conversion). If the signs of the divisor and dividend are different,
then the results will be different, or rather actually correct.
Before:
```nu
let q = 8 // -3 # -3
let r = 8 mod -3 # 2
8 == $q * -3 + $r # false
```
After:
```nu
let q = 8 // -3 # -3
let r = 8 mod -3 # -1
8 == $q * -3 + $r # true
```
Before:
```nu
let q = -8 // 3 # -3
let r = -8 mod 3 # -2
-8 == $q * 3 + $r # false
```
After:
```nu
let q = -8 // 3 # -3
let r = -8 mod 3 # 1
-8 == $q * 3 + $r # true
```
# Tests + Formatting
Added a few tests.
# After Submitting
Probably update the docs.
Fixes#14145
# User-Facing Changes
An empty rest match would be `null` previously. Now it will be an empty
list.
This is a breaking change for any scripts relying on the old behavior.
Example script:
```nu
match [1] {
[_ ..$rest] => {
match $rest {
null => { "old" }
[] => { "new" }
}
}
}
```
This expression would evaluate to "old" on current nu versions and "new"
with this patch.
# Description
Fixes#14222. The ability to set duration unit for `--max-time` when using the `http`
command util.
Signed-off-by: Alex Johnson <alex.kattathra.johnson@gmail.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds --no-deref flag to `touch`. Nice and backwards compatible, and I
get to touch symlinks. I still don't get to set their dates directly,
but maybe that'll come with utouch.
Some sadness in the implementation, since `set_symlink_file_times`
doesn't take Option values and we call it twice with the old "read"
values from reference (or now, if missing). This shouldn't be a big
concern since `touch` already did two calls if you set both mtime and
atime. Also, `--no-deref` applies both to the reference file, and to the
target file. No splitting them up, because that's silly.
Can always bikeshed. I nicked `--no-deref` from the uutils flag, and
made the short flag `-d` because it obviously can't be `-h`. I thought
of `-S` like in `glob`, for the "negative/filter out" uppercase short
letters. Ultimately I don't think it matters much.
Should fix#14212 since it's not really tied to uutils, besides the
comment about setting a `datetime` value directly.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New flag.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Maybe.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes: #13362
This PR fixes the `Display` impl for `CellPath`, as laid out in #13362
and #14090:
```nushell
> $.0."0"
$.0."0"
> $."foo.bar".baz
$."foo.bar".baz
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Cell-paths are now printed using the same `$.` notation that is used to
create them, and ambiguous column names are properly quoted.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
verb 'setup' -> 'set up'
setup as verb [is a misspelling of set
up](https://en.wiktionary.org/wiki/setup#Verb)
* [verb: set up](https://en.wiktionary.org/wiki/set_up)
* [noun: setup](https://en.wiktionary.org/wiki/setup)
*I split this from #14229 typo corrections because 'setup' is not as
clear-cut wrong. Having read the dictionary pages (linked) I'm even more
confident in this change being correct rather than only subjectively
better.*
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
A few simple changes:
* Extends the range of previews to include the attributes - Bold,
italic, underline, etc.
* Also resets the colors before *every* preview. Previously we weren't
doing this, so the "string" theme color was bleeding into a few previews
(mostly, if not all, `bg` ones). Now the "default foreground" color is
used for any preview without an explicit foreground color.
* Moves the preview code into the `if use_ansi_coloring` block as a
stupid-nitpick optimization. There's no reason to populate the previews
when they are explicitly not shown with `use_ansi_coloring: false`.
* Moves `reset` to the bottom of the attribute list so that it isn't
previewed. This is a bit of a nitpick as well since internally we send
the same code for both a `reset` and `attr_normal` (which is correct),
but semantically a `reset` doesn't seem like a "previewable" thing,
whereas "normal" text can be demonstrated with a preview.
# User-Facing Changes
`ansi -l` now shows additional previews
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes the `Display` implementation for `CellPath` show a `?`
suffix on every optional entry, which makes the output consistent with
the language syntax.
Before this PR, the printing of cell paths was confusing, e.g. `$.x` and
`$.x?` were both printed as `x`. Now, the second one is printed as `x?`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
The formatting of cell paths now matches the syntax used to create them,
reducing confusion.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
All tests pass, including `stdlib` tests.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Related to #14181
# Description
Our understanding of `ESC[3J` has apparently been wrong. And I say "our"
because I posted a [Super User
answer](https://superuser.com/a/1738611/1210833) a couple of years ago
with the same misconception (now fixed). In addition, the [crossterm
crate
doc](https://docs.rs/crossterm/latest/crossterm/terminal/enum.ClearType.html)
is wrong on the topic.
`ESC[3J` doesn't clear the screen plus the scrollback; it *only* clears
the scrollback. Reference the official [Xterm Control Sequences
doc](https://www.xfree86.org/4.8.0/ctlseqs.html).
> CSI P s J
>
> Erase in Display (ED)
>
> P s = 0 → Erase Below (default)
> P s = 1 → Erase Above
> P s = 2 → Erase All
> P s = 3 → Erase Saved Lines (xterm)
This also means that:
```nu
$"(ansi clear_entire_screen_plus_buffer)"
```
... doesn't.
This PR updates it to `ansi clear_scrollback_buffer` (short-code remains
the same).
# User-Facing Changes
Breaking-change: `ansi clear_entire_screen_plus_buffer` is renamed `ansi
clear_scrollback_buffer`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Self-documenting command via `ansi -l`
# Description
Makes `join` `right-table` support table literal notation instead of
parsing the column list (treated as empty data):
```diff
[{a: 1}] | join [[a]; [1]] a | to nuon
-[]
+[[a]; [1]]
```
Fixes#13537, fixes#14134
Addresses one of the points in #14162
# Description
Factors out part of the `url::build_query::to_url` function into a
separate function `url::query::record_to_qs()`, which is then used in
both `url::build_query` and `url::join`.
# User-Facing Changes
Like with `url build-query` (after #14073), `url join` will allow list
values in `params` and behavior of two commands will be same.
```nushell
> {a: ["one", "two"], b: "three"} | url build-query
"a=one&a=two&b=three"
> {scheme: "http", host: "host", params: {a: ["one", "two"], b: "three"}} | url join
"http://host?a=one&a=two&b=three"
```
# Tests + Formatting
Added an example to `url join` for the new behavior.
# Description
This PR allows oem code pages to be used in decoding by specifying the
code page number.
## Before
## After (umlauts)
closes https://github.com/nushell/nushell/issues/14168
I abstracted the decoding a bit. Here are my function comments on
how/why.
```rust
// Since we have two different decoding mechanisms, we allow oem_cp to be
// specified by only a number like `open file | decode 850`. If this decode
// parameter parses as a usize then we assume it was intentional and use oem_cp
// crate. Otherwise, if it doesn't parse as a usize, we assume it was a string
// and use the encoding_rs crate to try and decode it.
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fixes#14176
# Description
Since the Linux `/usr/bin/clear` binary doesn't exhibit the issue in
#14176, I checked to see what ANSI escapes it is emitting:
```nu
nu -c '^clear; "111\n222\n333"' | less
# or
bash -c 'clear -x; echo -e "111\n222\n333"' | less
```
Both show the same thing:
```
ESC[HESC[2JESC[3J111
222
333
(END)
```
This is the equivalent of:
```nu
$"(ansi home)(ansi clear_entire_screen)(ansi clear_entire_screen_plus_buffer)111\n222\n333"
```
However, our internal `clear` is sending only the Home and 3J. While
this *should*, in theory, work, it's (a) clear that it doesn't, and (b)
`/usr/bin/clear` seemingly knows this and already has the solution (or
at least workaround). From looking at the `ncurses` source, it appears
it is getting this information from the terminal capabilities. That
said, support for `2J` and `3J` is fairly universal, and it's what we
send in `clear` and `clear --keep-scrollback` anyway, so there's no harm
AFAICT in sending both like `/usr/bin/clear` does.
Also tested and fixes the issue on Windows. Note that PowerShell
`Clear-Host` also did not have the issue.
Side-note: It's interesting that on Tmux, which doesn't support 2J and
3J, that `/usr/bin/clear` knows this and doesn't send those codes,
sending just an escape-[J instead. However, Nushell's `clear`, of
course, isn't checking terminal capabilities, and is continuing to send
the unsupported codes. Fortunately this doesn't appear to cause any
issues on Tmux.
# User-Facing Changes
None, AFAICT - Bugfix only.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
This PR adds an indicator when listing subcommands. That indicator tells
whether the command is a plugin, alias, or custom_command.
I changed some of the API to make this work a little easier, namely
`get_signatures()` is now `get_signatures_and_declids()`. It was used in
only one other place (run-external), so I thought it was fine to change
it.
There is a long-standing issue with aliases where they reference the
command name instead of the alias name. This PR doesn't fix that bug.
Example.
```nushell
❯ alias "str fill" = str wrap
```
```nushell
❯ str
... other stuff
Subcommands:
str wrap (alias) - Alias for `str wrap`
str wrap (plugin) - Wrap text passed into pipeline.
```
# User-Facing Changes
Slightly different output of subcommands.
# Description
This PR closes#14137 and allows the display hook to be set on byte
streams. So, with a hook like this below.
```nushell
display_output: {
metadata access {|meta| match $meta.content_type? {
"application/x-nuscript" | "application/x-nuon" | "text/x-nushell" => { nu-highlight },
"application/json" => { ^bat --language=json --color=always --style=plain --paging=never },
_ => {},
}
} | table
}
```
You could type `open toolkit.nu` and the text of toolkit.nu would be
highlighted by nu-highlight. This PR also changes the way content-type
is assigned with `open`. Previously it would only assign it if `--raw`
was specified.
Lastly, it changes the `is_external()` function to only say
`ByteStreamSource::Child`'s are external instead of both Child and
`ByteStreamSource::File`. Again, this was to allow the hook to function
properly. I'm not sure what negative ramifications changing
`is_external()` could have, but there may be some?
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tries to make `to text` more consistent with how it adds
newlines and also gives you an opt-out --no-newline option.
I wasn't sure how to change the `PipelineData::ByteStream` match arm. I
figure something needs to be done there but I'm not sure how to do it.
# User-Facing Changes
newlines are more consistent.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR aims to close#14027, in which it was noticed that the transpose
command "swallows" error messages.
*Note that in exploring the linked issue, [other situations were
identified](https://github.com/nushell/nushell/issues/14027#issuecomment-2414602880)
which also produce inconsistent behaviour. These have knowingly been
omitted from this PR, to minimize its scope, and since they seem to have
a different cause. It's probably best to make a separate issue/PR in
which to tackle a broader scan of error handling, with a suspected
relation to streams.*
# User-Facing Changes
The user will see errors from deeper in the pipeline, in case the errors
originated there.
# Tests + Formatting
Toolkit PR check was run successfully.
One test was added, covering this exact situation, in order to prevent
regressions.
The bug is relatively obscure, so it may be prone to reappear during
refactorings.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Swagger supports lists (a.k.a arrays) in query parameters:
https://swagger.io/docs/specification/v3_0/serialization/
It supports three different styles:
- explode=true
- spaceDelimited
- pipeDelimited
With explode=true being the default and hence most common. It is the
hardest to use inside of nushell, as the others are just a `string join`
away. This commit adds lists with the explode=true format.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Before:
: {a[]: [one two three], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #33:1:1]
1 │ {a[]: [one two three], b: four} | url build-query
· ───────────────┬─────────────── ───────┬───────
· │ ╰── Expected a record with string values
· ╰── value originates from here
╰────
After:
: {a[]: [one two three], b: four} | url build-query
a%5B%5D=one&a%5B%5D=two&a%5B%5D=three&b=four
Despite reading CONTRIBUTING.md I didn't get approval before making the
change. My judgment is that this doesn't qualify as being "change
something significantly".
# Tests + Formatting
I added the Example instance for the automatic tests. I couldn't figure
out how to add an Example for the error case, so I did that with manual
testing. E.g.:
: {a[]: [one two [three]], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #3:1:1]
1 │ {a[]: [one two [three]], b: four} | url build-query
· ────────────────┬──────────────── ───────┬───────
· │ ╰── Expected a record with list of string values
· ╰── value originates from here
╰────
: {a[]: [one two 3hr], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #4:1:1]
1 │ {a[]: [one two 3hr], b: four} | url build-query
· ──────────────┬────────────── ───────┬───────
· │ ╰── Expected a record with list of string values
· ╰── value originates from here
╰────
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I ran the four cargo commands on my local machine. I had to run the
tests with:
LANG=C and -j 1 and even then I got one failure:
thread 'commands::umkdir::mkdir_umask_permission' panicked at
crates/nu-command/tests/commands/umkdir.rs:148:9:
assertion `left == right` failed: Most *nix systems have 0o00022 as the
umask. So directory permission should be 0o40755 = 0o
40777 & (!0o00022)
left: 16893
right: 16877
but this isn't related to this change (I seem to not be running most
*nix system; and don't have a lot of RAM for the number of cores). The
other three cargo commands didn't have errors or warnings.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I will add the new example to [the
documentation](https://github.com/nushell/nushell.github.io).
# Open questions / possible future work
Things I noticed, and would like to mention and am open to adding, but
don't think I am deep enough in nushell to do them pro-actively.
## Add an argument for the other query parameter list styles
I don't know how frequent they are and I currently don't need them, so
following KISS I didn't add them.
## long input_span marked
In e.g.:
: {a[]: [one two 3hr], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #4:1:1]
1 │ {a[]: [one two 3hr], b: four} | url build-query
· ──────────────┬────────────── ───────┬───────
· │ ╰── Expected a record with list of string values
· ╰── value originates from here
╰────
the entire record is marked as input_span instead of just the "3hr" that
is causing the problem. Changing that would be trivial, but I'm not deep
enough into nushell to understand all the consequences of changing that.
## Error message says string values despite accepting numbers etc.
The error message said it only accepted strings despite accepting
numbers etc. (anything it can coerce into string). I couldn't find a
good wording myself and that was how it was before. I simply added a
"list of strings".
# Description
This PR adds `start_time` to the MacOS `ps -l` command. Was requested in
discord. `start_time` is displayed in `Local` time.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
/cc @cablehead
# Description
This PR adds a couple more options for dealing with try/catch errors. It
adds a `json` version of the error and a `rendered` version of the
error. It also respects the error_style configuration point.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates `group-by` and `split-by` to allow other nushell Values
to be used, namely bools.
### Before
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #1:1:2]
1 │ [false, false, true, false, true, false] | group-by | table -e
· ──┬──
· ╰── can't convert bool to string
╰────
```
### After
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
╭───────┬───────────────╮
│ │ ╭───┬───────╮ │
│ false │ │ 0 │ false │ │
│ │ │ 1 │ false │ │
│ │ │ 2 │ false │ │
│ │ │ 3 │ false │ │
│ │ ╰───┴───────╯ │
│ │ ╭───┬──────╮ │
│ true │ │ 0 │ true │ │
│ │ │ 1 │ true │ │
│ │ ╰───┴──────╯ │
╰───────┴───────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Nushell currently depends on three different versions of the `windows`
crate: `0.44.0`, `0.52.0`, and `0.54.0`. This PR bumps several
dependencies so that the `nu` binary only depends on `0.56.0`.
On my machine, this PR makes `cargo build` about 10% faster.
The polars plugin still uses its own version of the `windows` crate
though, which is not ideal. We'll need to bump the `polars` crate to fix
that, but it breaks a lot of our code. (`polars 1.0` release anyone?)
Closes#13654
# User-Facing Changes
- Short flags are now fully type-checked,
including null and record signatures for literal arguments:
```nushell
def test [-v: record<l: int>] {};
test -v null # error
test -v {l: ""} # error
def test2 [-v: int] {};
let v = ""
test2 -v $v # error
```
- `polars unpivot` `--index`/`--on` and `into value --columns`
now accept `list` values
# Description
This PR adds a couple more options for dealing with try/catch errors. It
adds a `json` version of the error and a `rendered` version of the
error. It also respects the error_style configuration point.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates `group-by` and `split-by` to allow other nushell Values
to be used, namely bools.
### Before
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #1:1:2]
1 │ [false, false, true, false, true, false] | group-by | table -e
· ──┬──
· ╰── can't convert bool to string
╰────
```
### After
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
╭───────┬───────────────╮
│ │ ╭───┬───────╮ │
│ false │ │ 0 │ false │ │
│ │ │ 1 │ false │ │
│ │ │ 2 │ false │ │
│ │ │ 3 │ false │ │
│ │ ╰───┴───────╯ │
│ │ ╭───┬──────╮ │
│ true │ │ 0 │ true │ │
│ │ │ 1 │ true │ │
│ │ ╰───┴──────╯ │
╰───────┴───────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Nushell currently depends on three different versions of the `windows`
crate: `0.44.0`, `0.52.0`, and `0.54.0`. This PR bumps several
dependencies so that the `nu` binary only depends on `0.56.0`.
On my machine, this PR makes `cargo build` about 10% faster.
The polars plugin still uses its own version of the `windows` crate
though, which is not ideal. We'll need to bump the `polars` crate to fix
that, but it breaks a lot of our code. (`polars 1.0` release anyone?)
Closes#13654
# User-Facing Changes
- Short flags are now fully type-checked,
including null and record signatures for literal arguments:
```nushell
def test [-v: record<l: int>] {};
test -v null # error
test -v {l: ""} # error
def test2 [-v: int] {};
let v = ""
test2 -v $v # error
```
- `polars unpivot` `--index`/`--on` and `into value --columns`
now accept `list` values
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
The idea comes from @amtoine, I think it would be good to keey
`display_error.exit_code` same value, if user is using default config or
using no config file at all.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently, the `save -p` command updates the progress animation each
time any data is written. This PR rate limits the animation so it
doesn't play as fast.
Here's an asciinema of [current
behavior](https://asciinema.org/a/8RWrWTozQSceqx6tYY7kzblqj) and
[proposed behavior](https://asciinema.org/a/E1pi0gMwMwFcxVHOy9Fv1Kk6R).
# User-Facing Changes
* `save -p` progress bar has a smoother animation
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Closes#13920
# User-Facing Changes
`random binary` and `random chars` now support filesize arguments:
```nushell
random binary 1kb
random chars --length 1kb
```
# Description
Fixes#13991. This was done by more clearly separating the case when a
pipeline is drained vs when it is being written (to a file).
I also added an `OutDest::Print` case which might not be strictly
necessary, but is a helpful addition.
# User-Facing Changes
Bug fix.
# Tests + Formatting
Added a test.
# After Submitting
There are still a few redirection bugs that I found, but they require
larger code changes, so I'll leave them until after the release.
# Description
Apologies - The updated wording I used in the last PR *description* was
not what I actually pushed. I failed to commit and push the last update.
This PR fixes the code to reflect what was described in #14065:
```
-r, --header-row - use the first input column as the table header-row (or keynames when combined with --as-record)
```
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
(And visually confirmed help changes ;-))
# After Submitting
N/A
# Description
This PR standardizes updates to the config through a new
`UpdateFromValue` trait. For now, this trait is private in case we need
to make changes to it.
Note that this PR adds some additional `ShellError` cases to create
standard error messages for config errors. A follow-up PR will move
usages of the old error cases to these new ones. This PR also uses
`Type::custom` in lots of places (e.g., for string enums). Not sure if
this is something we want to encourage.
# User-Facing Changes
Should be none.
# Description
The help description on `transpose --header-row/-r` appears to be wrong
(and now that I understand that, it probably explains why it's confused
me for so long).
It currently says:
```
-r, --header-row - treat the first row as column names
```
This just looks wrong - The first **row** of the input data is not
considered. It's the first **column** that is used to create the
header-row of the transposed table.
For example:
To record using `-dr`:
```nu
[[col-names values ];
[foo 1 ]
[bar 5 ]
[baz 7 ]
[cat -12 ]
] | transpose -dr
╭─────┬─────╮
│ foo │ 1 │
│ bar │ 5 │
│ baz │ 7 │
│ cat │ -12 │
╰─────┴─────╯
```
To table using `-r`:
```nu
[[col-names values ];
[foo 1 ]
[bar 5 ]
[baz 7 ]
[cat -12 ]
] | transpose -r
╭───┬─────┬─────┬─────┬─────╮
│ # │ foo │ bar │ baz │ cat │
├───┼─────┼─────┼─────┼─────┤
│ 0 │ 1 │ 5 │ 7 │ -12 │
╰───┴─────┴─────┴─────┴─────╯
```
# User-Facing Changes
Updates the help description to:
```
-r, --header-row - use the first input column as the table header-row (or keynames when combined with --as-record)
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
