# Description
The `explore` command is `less`-like, but it's missing the `Emacs`
keybindings for up/down and PageUp/PageDown as well as the "q" to quit
out. When I looked into adding those additional keybindings, I noticed
there was a lot of duplicated code in the various views, so I refactored
the code into a new `trait CursorMoveHandler`. I also noticed that there
was an existing `TODO: should we add a noop transition instead of doing
Option<Transition> everywhere?` comment in the code. I went ahead and
implemented a new `Transition::None`, and that made the new `trait
CursorMoveHandler` code MUCH cleaner, in addition to making some of the
old code a little cleaner as well.
# User-Facing Changes
Users that are used to the keybindings for `less` should feel much more
comfortable using `explore`.
# Tests + Formatting
Unfortunately, there aren't any existing tests for the `explore`
command, so I didn't know where I should add new tests to cover my code
changes.
---------
Co-authored-by: paulie4 <203125+paulie4@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
The [nushell/demo](https://github.com/nushell/demo) project successfully
demonstrated running Nushell in the browser using WASM. However, the
current version of Nushell cannot be easily built for the
`wasm32-unknown-unknown` target, the default for `wasm-bindgen`.
This PR introduces initial support for the `wasm32-unknown-unknown`
target by disabling OS-dependent features such as filesystem access, IO,
and platform/system-specific functionality. This separation is achieved
using a new `os` feature in the following crates:
- `nu-cmd-lang`
- `nu-command`
- `nu-engine`
- `nu-protocol`
The `os` feature includes all functionality that interacts with an
operating system. It is enabled by default, but can be disabled using
`--no-default-features`. All crates that depend on these core crates now
use `--no-default-features` to allow compilation for WASM.
To demonstrate compatibility, the following script builds all crates
expected to work with WASM. Direct user interaction, running external
commands, working with plugins, and features requiring `openssl` are out
of scope for now due to their complexity or reliance on C libraries,
which are difficult to compile and link in a WASM environment.
```nushell
[ # compatible crates
"nu-cmd-base",
"nu-cmd-extra",
"nu-cmd-lang",
"nu-color-config",
"nu-command",
"nu-derive-value",
"nu-engine",
"nu-glob",
"nu-json",
"nu-parser",
"nu-path",
"nu-pretty-hex",
"nu-protocol",
"nu-std",
"nu-system",
"nu-table",
"nu-term-grid",
"nu-utils",
"nuon"
] | each {cargo build -p $in --target wasm32-unknown-unknown --no-default-features}
```
## Caveats
This PR has a few caveats:
1. **`miette` and `terminal-size` Dependency Issue**
`miette` depends on `terminal-size`, which uses `rustix` when the target
is not Windows. However, `rustix` requires `std::os::unix`, which is
unavailable in WASM. To address this, I opened a
[PR](https://github.com/eminence/terminal-size/pull/68) for
`terminal-size` to conditionally compile `rustix` only when the target
is Unix. For now, the `Cargo.toml` includes patches to:
- Use my forked version of `terminal-size`.
- ~~Use an unreleased version of `miette` that depends on
`terminal-size@0.4`.~~
These patches are temporary and can be removed once the upstream changes
are merged and released.
2. **Test Output Adjustments**
Due to the slight bump in the `miette` version, one test required
adjustments to accommodate minor formatting changes in the error output,
such as shifted newlines.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
This shouldn't break anything but allows using some crates for targeting
`wasm32-unknown-unknown` to revive the demo page eventually.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
I did not add any extra tests, I just checked that compiling works, also
when using the host target but unselecting the `os` feature.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
~~Breaking the wasm support can be easily done by adding some `use`s or
by adding a new dependency, we should definitely add some CI that also
at least builds against wasm to make sure that building for it keep
working.~~
I added a job to build wasm.
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This PR makes it so that when a custom completer sets `options.sort` to
true, completions aren't sorted. Previously, in #13311, I'd made it so
that setting `sort` to true would sort in alphabetical order, while
omitting it or setting it to false would sort it in the default order
for the chosen match algorithm (alphabetical for prefix matching, fuzzy
match score for fuzzy matching). I'd assumed that you'd always want to
sort completions and the important thing was choosing alphabetical
sorting vs the default sort order for your match algorithm. However,
this assumption was incorrect (see #13696 and [this
thread](https://discord.com/channels/601130461678272522/1302332259227144294)
in Discord).
An alternative would be to make `sort` accept `"alphabetical"`,
`"smart"`, and `"none"`/`null` rather than keeping it a boolean. But
that would be a breaking change and require more discussion, and I
wanted to keep this PR simple/small so that we can go back to the
sensible behavior as soon as possible.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Here are the different scenarios:
- If your custom completer returns a record with an `options` field
that's a record:
- If `options` contains `sort: true`, completions **will be sorted
according to the order set in the user's config**. Previously, they
would have been sorted in alphabetical order. This does mean that
**custom completers cannot explicitly choose to sort in alphabetical
order** anymore. I think that's an acceptable trade-off, though.
- If `options` contains `sort: false`, completions will not be sorted.
#13311 broke things so they would be sorted in the default order for the
match algorithm used. Before that PR, completions would not have been
sorted.
- If there's no `sort` option, that **will be treated as `sort: true`**.
Previously, this would have been treated as `sort: false`.
- Otherwise, nothing changes. Completions will still be sorted.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added 1 test to make sure that completions aren't sorted with `sort:
false` explicitly set.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Before this PR, you can access rendered error values that are raised in
a `try/catch` block by accessing the `rendered` element of the catch
error value:
```
$ try { ls nonexist.txt } catch {|e| print "my cool error:" $e.rendered }
my cool error:
nu:🐚:directory_not_found
× Directory not found
help: /home/rose/nonexist.txt does not exist
```
However, the rendered errors don't include the labels present in the
real rendered error, which would look like this:
```
$ ls nonexist.txt
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #46:1:4]
1 │ ls nonexist.txt
· ──────┬─────
· ╰── directory not found
╰────
help: /home/rose/nonexist.txt does not exist
```
After this PR, the rendered error includes the labels:
```
$ try { ls nonexist.txt } catch {|e| print "my cool error:" $e.rendered }
my cool error:
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #4:1:10]
1 │ try { ls nonexist.txt } catch {|e| print "my cool error:" $e.rendered }
· ──────┬─────
· ╰── directory not found
╰────
help: /home/rose/nonexist.txt does not exist
```
This change is accomplished by using the standard error formatting code
to render an error. This respects the error theme as before without any
extra scaffolding, but it means that e.g., the terminal size is also
respected. I think this is fine because the way the error is rendered
already changed based on config, and I think that a "rendered" error
should give back _exactly_ what would be shown to the user anyway.
@fdncred, let me know if you have any concerns with the way this is
handled since you were the one who implemented this feature in the first
place.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
The `rendered` element of the `try`/`catch` error record now includes
labels in the error output.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
# Description
Implements #11234 based on the comments there:
* (Previously implemented): `into record` handles nanoseconds (as well
as milliseconds and microseconds, which the deprecated commands didn't
support).
* Added deprecation warning to `date to-record` and `date to-table`
* Added new example for `into record` showing the conversion to a table
* Changed `std/dt` to use `into record`
* Added "Deprecated" category back to nu-protocol::Signature
* Assigned the deprecated commands to the Deprecated category so be
categorized properly in the online Doc.
# User-Facing Changes
Deprecated command warning
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Searched doc for existing uses of `date to-record` and `date to-table`:
* For primary English-language docs, there are no uses other than in the
auto-generated command help, which will be updated based on this PR
* Other language translations appear to have an old use in several
places and will need to be updated to match the English-language doc.
# Description
While reviewing #14388, I think we can make some improvement on parser.
For the following code:
```nushell
let a = 3
a = 10 # should be error
$a = 10 # another error
```
I think they can raise `ParseError`, so nushell doesn't need to move
forward compiling IR block.
# User-Facing Changes
```nushell
let a = 3
a = 10
```
Will raise parse error instead of compile error.
# Tests + Formatting
Added 1 test.
# Description
Adds a new `Filesize` type so that `FromValue` can be used to convert a
`Value::Filesize` to a `Filesize`. Currently, to extract a filesize from
a `Value` using `FromValue`, you have to extract an `i64` which coerces
`Value::Int`, `Value::Duration`, and `Value::Filesize` to an `i64`.
Having a separate type also allows us to enforce checked math to catch
overflows. Similarly, it allows us to specify other trait
implementations like `Display` in a common place.
# User-Facing Changes
Multiplication with filesizes now error on overflow. Should not be a
breaking change for plugins (i.e., serialization) since `Filesize` is
marked with `serde(transparent)`.
# Tests + Formatting
Updated some tests.
# Description
This removes the need for the `shape_and` and `shape_or` entries in the
themes. We did not color those underlying FlatShapes or operators
differently.
Closes#14372
# User-Facing Changes
Our theme handling currently doesn't reject invalid entries so should
not cause an error. The non-functional nature was already documented.
# Description
Follow up to #14341. Changes the fields of `Hooks` to `Vec` or `Hashmap`
to match the new config defaults.
# User-Facing Changes
Mostly the same as #14341. `pre_prompt` and `pre_execution` must now be
a list, and `env_change` must be a record.
# Description
Before this PR, `length` did not check its input type at run-time, so it
would attempt to calculate a length for any input with indeterminate
type (e.g., `echo` which has an `any` output type). This PR makes
`length` only work on the types specifically supported in its
input/output types (list/table, binary, and nothing), making the
behavior the same at parse-time and at run-time.
Fixes#14462
# User-Facing Changes
Length will error if passed an unsupported type:
Before (only caught at parse-time):
```nushell
"hello" | length
Error: nu::parser::input_type_mismatch
× Command does not support string input.
╭─[entry #2:1:11]
1 │ "hello" | length
· ───┬──
· ╰── command doesn't support string input
╰────
echo "hello" | length
# => 1
```
After (caught at parse-time and run-time):
```nushell
"hello" | length
Error: nu::parser::input_type_mismatch
× Command does not support string input.
╭─[entry #22:1:11]
1 │ "hello" | length
· ───┬──
· ╰── command doesn't support string input
╰────
echo "hello" | length
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #23:1:6]
1 │ echo "hello" | length
· ───┬─── ───┬──
· │ ╰── only list, table, binary, and nothing input data is supported
· ╰── input type: string
╰────
```
# Description
When looking into #14395, I found that `unicode-width` from 0.1 to 0.2
contains a breaking change, the mainly change is it treats newlines as
width 1. So relative tests(str stats) are broken.
But I think it's ok to adjust the test.
# User-Facing Changes
The output of `str stats` might change if there are `\n` in the input.
### Before
```nushell
> "a\nb" | str stats | get unicode-width
2
```
### After
```nushell
> "a\nb" | str stats | get unicode-width
3
```
# Tests + Formatting
Adjusted 2 tests.
# After Submitting
NaN
# Description
Due to #14249 loading `default_env.nu` before the user's `env.nu`,
variables that were defined there were overriding:
* Inherited values
* Some values that were set in the Rust code, such as the `NU_LIB_PATH`
when set using `--include-path`.
This change checks to see if a variable already exists, uses its value
if so, and sets the default value otherwise.
Note: `ENV_CONVERSIONS` is still "forced" to a default value regardless,
as it needs to run reliably. There's probably not much reason to inherit
it, but I'm open to the idea if there's a use-case.
# User-Facing Changes
* Before: Variables that were set in `default_env.nu` always overrode
those that were inherited from the parent process or set internally
* After: Inherited and internal environment variables will take
priority.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Will try to find a good place to mention this behavior in the Config
chapter updates
# Description
Someone noticed today that I had left a TODO in the Readme. It has since
been completed and needed to be removed. Also made some other minor
fixes and wordsmithing while I was in it.
# User-Facing Changes
None
# Tests + Formatting
Clippy and fmt passed, and that should be all that matters on the
Readme.
# After Submitting
N/A
# Description
The test is failed when updating miette from 7.2 to 7.3. After looking
into the test, I think it's ok to adjust test.
# User-Facing Changes
For the given custom command:
```nushell
def force_error [ x: any ] {
error make {
msg: "oh no!"
label: {
text: "here's the error"
span: (metadata $x).span
}
}
}
```
### Before
```
> force_error "My error"
Error: × oh no!
╭─[entry #8:1:13]
1 │ force_error "My error"
· ─────┬────
· ╰── here's the error
╰────
```
### After
```
> force_error "My error"
Error:
× oh no!
╭─[entry #9:1:13]
1 │ force_error "My error"
· ─────┬────
· ╰── here's the error
╰────
```
As we can see, the message `oh no!` is output in a new line, and there
is one less trailing line. I have makes some testing, and it seems that
it only happened on `error make` command.
# Tests + Formatting
Changed 1 test
# After Submitting
NaN
# Description
Propagate existing errors in the pipeline, rather than a type error.
# User-Facing Changes
Nothing that previously worked should be affected, this should just
change the errors.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
i was playing with the NDNUON format and using local definitions of
`from ndnuon` and `to ndnuon` but then i thought they could live in the
standard library next to `from ndjson` and `to ndjson` 😋
# User-Facing Changes
users can now add the following to their configs and get NDNUON ready to
go
```nushell
use std formats ["from ndnuon" "to ndnuon"]
```
# Tests + Formatting
i did simply mimic the tests for `from ndjson` and `to ndjson`, i hope
it's fine since the recent big change to the standard library
# After Submitting
---------
Co-authored-by: Douglas <32344964+NotTheDr01ds@users.noreply.github.com>
# Description
As title, this pr is going to deprecate `--ignore-shell-errors` and
`--ignore-program-errors`.
Because I think these two flags makes `do` command complicate, and it
should be easy to use `-i` instead.
# User-Facing Changes
After the pr, using these two flags will raise deprecated warning.
```nushell
> do --ignore-program-errors { ^pwd }
Error: × Deprecated option
╭─[entry #2:1:1]
1 │ do --ignore-program-errors { ^pwd }
· ─┬
· ╰── `--ignore-program-errors` is deprecated and will be removed in 0.102.0.
╰────
help: Please use the `--ignore-errors(-i)`
/home/windsoilder/projects/nushell
> do --ignore-shell-errors { ^pwd }
Error: × Deprecated option
╭─[entry #3:1:1]
1 │ do --ignore-shell-errors { ^pwd }
· ─┬
· ╰── `--ignore-shell-errors` is deprecated and will be removed in 0.102.0.
╰────
help: Please use the `--ignore-errors(-i)`
/home/windsoilder/projects/nushell
```
# Tests + Formatting
NaN
# Description
List values and list streams have the same type (`list<>`). Rather,
streaming is a separate property of the pipeline/command output. This PR
removes the unnecessary `ListStream` type.
# User-Facing Changes
Should be none, except `random dice` now has a more specific output
type.
# Description
Fixes: #13159
After the change, `std help` will no-longer print out "double error"
messages.
Actually I think it's tricky to make it right. To make `help <cmd>`
keeps paging feature from fallback `man` command. I have to split
`commands` into `scope-commands` and `external-commands`.
If we don't split it, simply call `let commands = (try { commands
$target_item --find $find })` in `help main` will cause us to lost
paging feature, which is not we want.
A comment from original issue:
> If there are no objections, I'd like to remove the man page fallback
code from std help for the moment. While it's probably fixable, it's
also platform specific and requires testing on all platforms. It also
seems like a low-value add here.
Actually I think it's a beautiful feature of `std help`, so I want to
keep it here.
# User-Facing Changes
### Before
```nushell
> help commands asdfadsf
Help pages from external command asdfadsf:
No manual entry for asdfadsf
Error: × std::help::command_not_found
╭─[entry #11:1:15]
1 │ help commands asdfadsf
· ────┬───
· ╰── command not found
╰────
```
### After
```nushell
> help commands asdfasdf
Help pages from external command asdfasdf:
No manual entry for asdfasdf
```
# Tests + Formatting
Actually it's a little hard to add test because it required user input
(especially for fallback `man` command)
# Description
I just completely left out `$env.PROMPT_COMMAND_RIGHT` in the
`sample_env.nu`. This adds it in.
# User-Facing Changes
`config env --sample` will now include doc for `PROMPT_COMMAND_RIGHT`.
# Tests + Formatting
Doc-only
# After Submitting
n/a
## Related
- #10150
- https://github.com/nushell/nushell/pull/10150#issuecomment-1721238336
- #10387
- https://github.com/nushell/nushell/pull/10387#issuecomment-1722228185
# Description
`term query`: a command for querying information from the terminal.
Prints the `$query`, and immediately starts reading raw bytes from
stdin.
The standard input will be read until the `terminator` sequence is
encountered.
The `terminator` is not removed from the output.
It also stops on <kbd>Ctrl-C</kbd> with an error.
```
Usage:
> term query {flags} <query>
Flags:
-h, --help: Display the help message for this command
-t, --terminator (required parameter) <one_of(binary, string)>: stdin will be read until this sequence is encountered
Parameters:
query <one_of(binary, string)>: The query that will be printed to stdout
```
This was previously possible with `input` until #10150.
`input` command's features such as cursor control, deleting input etc.
are useful, but interfere with this use case.
`term query` makes the following uses possible:
```nushell
# get the terminal size with ansi escape codes
def terminal-size [] {
let response = term query (ansi size) --terminator 'R'
# $response should look like this
# Length: 9 (0x9) bytes | printable whitespace ascii_other non_ascii
# 00000000: 1b 5b 33 38 3b 31 35 30 52 •[38;150R
let sz = $response | bytes at 2..<-1 | decode
# 38;150
# $sz should look like 38;150
let size = ($sz | split row ';' | each {into int})
# output in record syntax
{
rows: $size.0
columns: $size.1
}
}
```
```nushell
# read clipboard content using OSC 52
term query $"(ansi --osc '52;c;?')(ansi st)" --terminator (ansi st)
| bytes at 7..<-2
| decode
| decode base64
| decode
```
# User-Facing Changes
- added `ansi query`
# Tests + Formatting
- Integration tests should be added if possible.
# Description
The "append" operator currently serves as both the append operator and
the concatenation operator. This dual role creates ambiguity when
operating on nested lists.
```nu
[1 2] ++ 3 # appends a value to a list [1 2 3]
[1 2] ++ [3 4] # concatenates two lists [1 2 3 4]
[[1 2] [3 4]] ++ [5 6]
# does this give [[1 2] [3 4] [5 6]]
# or [[1 2] [3 4] 5 6]
```
Another problem is that `++=` can change the type of a variable:
```nu
mut str = 'hello '
$str ++= ['world']
($str | describe) == list<string>
```
Note that appending is only relevant for lists, but concatenation is
relevant for lists, strings, and binary values. Additionally, appending
can be expressed in terms of concatenation (see example below). So, this
PR changes the `++` operator to only perform concatenation.
# User-Facing Changes
Using the `++` operator with a list and a non-list value will now be a
compile time or runtime error.
```nu
mut list = []
$list ++= 1 # error
```
Instead, concatenate a list with one element:
```nu
$list ++= [1]
```
Or use `append`:
```nu
$list = $list | append 1
```
# After Submitting
Update book and docs.
---------
Co-authored-by: Douglas <32344964+NotTheDr01ds@users.noreply.github.com>
# Description
This PR removes the `terminal_size` crate everywhere that it made sense.
I replaced it with crossterm's version called `size`. The places I
didn't remove it were the places that did not have a dependency on
crossterm. So, I thought it was "cheaper" to have a dep on term_size vs
crossterm in those locations.
# Description
Apparently it should be joint CRLF for the EOL marker
https://www.rfc-editor.org/rfc/rfc2616#section-2.2
Plain LF isn't particularly standardized and many backends don't
recognize it. Tested on `starlette`
# User-Facing Changes
None
# Tests + Formatting
It's two characters; everything passes
# After Submitting
Not needed
# User-Facing Changes
- `expected <type>` errors are now propagated from
`Closure | Block | Expression` instead of falling back to
"expected one of..." for the block:
Before:
```nushell
def foo [bar: bool] {}
if true {} else { foo 1 }
────┬────
╰── expected one of a list of accepted shapes: [Block, Expression]
```
After:
```nushell
if true {} else { foo 1 }
┬
╰── expected bool
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes it so that when using fuzzy matching, the score isn't
recomputed when sorting. Instead, filtering and sorting suggestions is
handled by a new `NuMatcher` struct. This struct accepts suggestions
and, if they match the user's typed text, stores those suggestions
(along with their scores and values). At the end, it returns a sorted
list of suggestions.
This probably won't have a noticeable impact on performance, but it
might be helpful if we start using Nucleo in the future.
Minor change: Makes `find_commands_by_predicate` in `StateWorkingSet`
and `EngineState` take `FnMut` rather than `Fn` for the predicate.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
When using case-insensitive matching, if you have two matches `FOO` and
`abc`, `abc` will be shown before `FOO` rather than the other way
around. I think this way makes more sense than the current behavior.
When I brought this up on Discord, WindSoilder did say it would make
sense to show uppercase matches first if the user typed, say, `F`.
However, that would be a lot more complicated to implement.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added a test for the changes in
https://github.com/nushell/nushell/pull/13302.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- fixes#14398
I will properly fill out this PR and fix any tests that might break when
I have the time, this was a quick fix.
# Description
This PR makes `from csv` and `from tsv`, with the `--flexible` flag,
stop dropping extra/unexpected columns.
# User-Facing Changes
`$text`'s contents
```csv
value
1,aaa
2,bbb
3
4,ddd
5,eee,extra
```
Old behavior
```nushell
> $text | from csv --flexible --noheaders
╭─#─┬─column0─╮
│ 0 │ value │
│ 1 │ 1 │
│ 2 │ 2 │
│ 3 │ 3 │
│ 4 │ 4 │
│ 5 │ 5 │
╰─#─┴─column0─╯
```
New behavior
```nushell
> $text | from csv --flexible --noheaders
╭─#─┬─column0─┬─column1─┬─column2─╮
│ 0 │ value │ ❎ │ ❎ │
│ 1 │ 1 │ aaa │ ❎ │
│ 2 │ 2 │ bbb │ ❎ │
│ 3 │ 3 │ ❎ │ ❎ │
│ 4 │ 4 │ ddd │ ❎ │
│ 5 │ 5 │ eee │ extra │
╰─#─┴─column0─┴─column1─┴─column2─╯
```
- The first line in a csv (or tsv) document no longer limits the number
of columns
- Missing values in columns are longer automatically filled with `null`
with this change, as a later row can introduce new columns. **BREAKING
CHANGE**
Because missing columns are different from empty columns, operations on
possibly missing columns will have to use optional access syntax e.g.
`get foo` => `get foo?`
# Tests + Formatting
Added examples that run as tests and adjusted existing tests to confirm
the new behavior.
# After Submitting
Update the workaround with fish completer mentioned
[here](https://www.nushell.sh/cookbook/external_completers.html#fish-completer)
This commit upgrades calamine in order to benefit from recent
developments, e.g. ignore annotations in column headers (see
https://github.com/tafia/calamine/pull/467 for reference).
# Description
I'm not quite sure what the point of the `split-by` command is. The only
example for the command seems to suggest it's an additional grouping
command. I.e., a record that seems to be the output of the `group-by`
command is passed to `split-by` which then adds an additional layer of
grouping based on a different column.
# User-Facing Changes
Breaking change, deprecated the command.
# Release-Notes Short Description
* Nushell now always loads its internal `default_env.nu` before the user
`env.nu` is loaded, then loads the internal `default_config.nu` before
the user's `config.nu` is loaded. This allows for a simpler
user-configuration experience. The Configuration Chapter of the Book
will be updated soon with the new behavior.
# Description
Implements the main ideas in #13671 and a few more:
* Users can now specify only the environment and config options they
want to override in *their* `env.nu` and `config.nu`and yet still have
access to all of the defaults:
* `default_env.nu` (internally defined) will be loaded whenever (and
before) the user's `env.nu` is loaded.
* `default_config.nu` (internally defined) will be loaded whenever (and
before) the user's `config.nu` is loaded.
* No more 900+ line config out-of-the-box.
* Faster startup (again): ~40-45% improvement in launch time with a
default configuration.
* New keys that are added to the defaults in the future will
automatically be available to all users after updating Nushell. No need
to regenerate config to get the new defaults.
* It is now possible to have different internal defaults (which will be
used with `-c` and scripts) vs. REPL defaults. This would have solved
many of the user complaints about the [`display_errors`
implementation](https://www.nushell.sh/blog/2024-09-17-nushell_0_98_0.html#non-zero-exit-codes-are-now-errors-toc).
* A basic "scaffold" `config.nu` and `env.nu` are created on first
launch (if the config directory isn't present).
* Improved "out-of-the-box" experience (OOBE) - No longer asks to create
the files; the minimal scaffolding will be automatically created. If
deleted, they will not be regenerated. This provides a better
"out-of-the-box" experience for the user as they no longer have to make
this decision (without much info on the pros or cons) when first
launching.
* <s>(New: 2024-11-07) Runs the env_conversions process after the
`default_env.nu` is loaded so that users can treat `Path`/`PATH` as
lists in their own config.</s>
* (New: 2024-11-08) Given the changes in #13802, `default_config.nu`
will be a minimal file to minimize load-times. This shaves another (on
my system) ~3ms off the base launch time.
* Related: Keybindings, menus, and hooks that are already internal
defaults are no longer duplicated in `$env.config`. The documentation
will be updated to cover these scenarios.
* (New: 2024-11-08) Move existing "full" `default_config.nu` to
`sample_config.nu` for short-term "documentation" purposes.
* (New: 2024-11-18) Move the `dark-theme` and `light-theme` to Standard
Library and demonstrate their use - Also improves startup times, but
we're reaching the limit of optimization.
* (New: 2024-11-18) Extensively documented/commented `sample_env.nu` and
`sample_config.nu`. These can be displayed in-shell using (for example)
`config nu --sample | nu-highlight | less -R`. Note: Much of this will
eventually be moved to or (some) duplicated in the Doc. But for now,
this some nice in-shell doc that replaces the older
"commented/documented default".
* (New: 2024-11-20) Runs the `ENV_CONVERSIONS` process (1) after the
`default_env.nu` (allows `PATH` to be used as a list in user's `env.nu`)
and (2) before `default_config.nu` is loaded (allows user's
`ENV_CONVERSIONS` from their `env.nu` to be used in their `config.nu`).
* <s>(New: 2024-11-20) The default `ENV_CONVERSIONS` is now an empty
record. The internal Rust code handles `PATH` (and variants) conversions
regardless of the `ENV_CONVERSIONS` variable. This shaves a *very* small
amount of time off the startup.</s> Reset - Looks like there might be a
bug in `nu-enginer::env::ensure_path()` on Windows that would need to be
fixed in order for this to work.
# User-Facing Changes
By default, you shouldn't see much, if any, change when running this
with your existing configuration.
To see the greatest benefit from these changes, you'll probably want to
start with a "fresh" config. This can be easily tested using something
like:
```nushell
let temp_home = (mktemp -d)
$env.XDG_CONFIG_HOME = $temp_home
$env.XDG_DATA_HOME = $temp_home
./target/release/nu
```
You should see a message where the (mostly empty) `env.nu` and
`config.nu` are created on first start. Defaults should be the same (or
similar to) those before the PR. Please let me know if you notice any
differences.
---
Users should now specify configuration in terms of overrides of each
setting. For instance, rather than modifying `history` settings in the
monolithic `config.nu`, the following is recommended in an updated
`config.nu`:
```nu
$env.config.history = {
file_format: sqlite,
sync_on_enter: true
isolation: true
max_size: 1_000_000
}
```
or even just:
```nu
$env.config.history.file_format = sqlite
$env.config.history.isolation: true
$env.config.history.max_size = 1_000_000
```
Note: It seems many users are already appending a `source my_config.nu`
(or similar pattern) to the end of the existing `config.nu` to make
updates easier. In this case, they will likely want to remove all of the
previous defaults and just move their `my_config.nu` to `config.nu`.
Note: It should be unlikely that there are any breaking changes here,
but there's a slim chance that some code, somewhere, *expects* an
absence of certain config values. Otherwise, all config values are
available before and after this change.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Configuration Chapter (and related) of the doc is currently WIP and will
be finished in time for 0.101 release.
# Description
By request, this PR introduces a new `--flatten` parameter to the ast
command for generating a more readable version of the AST output. This
enhancement improves usability by allowing users to easily visualize the
structure of the AST.
```nushell
❯ ast 'ls | sort-by type name -i' --flatten --json
[
{
"content": "ls",
"shape": "shape_internalcall",
"span": {
"start": 0,
"end": 2
}
},
{
"content": "|",
"shape": "shape_pipe",
"span": {
"start": 3,
"end": 4
}
},
{
"content": "sort-by",
"shape": "shape_internalcall",
"span": {
"start": 5,
"end": 12
}
},
{
"content": "type",
"shape": "shape_string",
"span": {
"start": 13,
"end": 17
}
},
{
"content": "name",
"shape": "shape_string",
"span": {
"start": 18,
"end": 22
}
},
{
"content": "-i",
"shape": "shape_flag",
"span": {
"start": 23,
"end": 25
}
}
]
❯ ast 'ls | sort-by type name -i' --flatten --json --minify
[{"content":"ls","shape":"shape_internalcall","span":{"start":0,"end":2}},{"content":"|","shape":"shape_pipe","span":{"start":3,"end":4}},{"content":"sort-by","shape":"shape_internalcall","span":{"start":5,"end":12}},{"content":"type","shape":"shape_string","span":{"start":13,"end":17}},{"content":"name","shape":"shape_string","span":{"start":18,"end":22}},{"content":"-i","shape":"shape_flag","span":{"start":23,"end":25}}]
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR allows nushell to run powershell scripts easier. You can already
do `powershell -c script.ps1` but this PR takes it a step further by
doing the `powershell -c` part for you. So, if you have script.ps1 you
can execute it by running it in the command position of the repl.
or once it's in json, just consume it with nushell.
# User-Facing Changes
Easier to run powershell scripts. It should work on Windows with
powershell.exe.
# Tests + Formatting
Added 1 test
# After Submitting
---------
Co-authored-by: Wind <WindSoilder@outlook.com>
# Description
Because the IR compiler was previously optional, compile errors were not
treated as fatal errors, and were just logged like parse warnings are.
This unfortunately meant that if a user encountered a compile error,
they would see "Can't evaluate block in IR mode" as the actual error in
addition to (hopefully) logging the compile error.
This changes compile errors to be treated like parse errors so that they
show up as the last error, helping users understand what's wrong a
little bit more easily.
Fixes#14333.
# User-Facing Changes
- Shouldn't see "Can't evaluate block in IR mode"
- Should only see compile error
- No evaluation should happen
# Tests + Formatting
Didn't add any tests specifically for this, but it might be good to have
at least one that checks to ensure the compile error shows up and the
"can't evaluate" error does not.
Bumps [thiserror](https://github.com/dtolnay/thiserror) from 1.0.69 to
2.0.3.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/thiserror/releases">thiserror's
releases</a>.</em></p>
<blockquote>
<h2>2.0.3</h2>
<ul>
<li>Support the same Path field being repeated in both Debug and Display
representation in error message (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/383">#383</a>)</li>
<li>Improve error message when a format trait used in error message is
not implemented by some field (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/384">#384</a>)</li>
</ul>
<h2>2.0.2</h2>
<ul>
<li>Fix hang on invalid input inside #[error(...)] attribute (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/382">#382</a>)</li>
</ul>
<h2>2.0.1</h2>
<ul>
<li>Support errors that contain a dynamically sized final field (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/375">#375</a>)</li>
<li>Improve inference of trait bounds for fields that are interpolated
multiple times in an error message (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/377">#377</a>)</li>
</ul>
<h2>2.0.0</h2>
<h2>Breaking changes</h2>
<ul>
<li>
<p>Referencing keyword-named fields by a raw identifier like
<code>{r#type}</code> inside a format string is no longer accepted;
simply use the unraw name like <code>{type}</code> (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/347">#347</a>)</p>
<p>This aligns thiserror with the standard library's formatting macros,
which gained support for implicit argument capture later than the
release of this feature in thiserror 1.x.</p>
<pre lang="rust"><code>#[derive(Error, Debug)]
#[error("... {type} ...")] // Before: {r#type}
pub struct Error {
pub r#type: Type,
}
</code></pre>
</li>
<li>
<p>Trait bounds are no longer inferred on fields whose value is shadowed
by an explicit named argument in a format message (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/345">#345</a>)</p>
<pre lang="rust"><code>// Before: impl<T: Octal> Display for
Error<T>
// After: impl<T> Display for Error<T>
#[derive(Error, Debug)]
#[error("{thing:o}", thing = "...")]
pub struct Error<T> {
thing: T,
}
</code></pre>
</li>
<li>
<p>Tuple structs and tuple variants can no longer use numerical
<code>{0}</code> <code>{1}</code> access at the same time as supplying
extra positional arguments for a format message, as this makes it
ambiguous whether the number refers to a tuple field vs a different
positional arg (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/354">#354</a>)</p>
<pre lang="rust"><code>#[derive(Error, Debug)]
#[error("ambiguous: {0} {}", $N)]
// ^^^ Not allowed, use #[error("... {0} {n}", n = $N)]
pub struct TupleError(i32);
</code></pre>
</li>
<li>
<p>Code containing invocations of thiserror's <code>derive(Error)</code>
must now have a direct dependency on the <code>thiserror</code> crate
regardless of the error data structure's contents (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/368">#368</a>,
<a
href="https://redirect.github.com/dtolnay/thiserror/issues/369">#369</a>,
<a
href="https://redirect.github.com/dtolnay/thiserror/issues/370">#370</a>,
<a
href="https://redirect.github.com/dtolnay/thiserror/issues/372">#372</a>)</p>
</li>
</ul>
<h2>Features</h2>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="15fd26e476"><code>15fd26e</code></a>
Release 2.0.3</li>
<li><a
href="7046023130"><code>7046023</code></a>
Simplify how has_bonus_display is accumulated</li>
<li><a
href="9cc1d0b251"><code>9cc1d0b</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/thiserror/issues/384">#384</a>
from dtolnay/nowrap</li>
<li><a
href="1d040f358a"><code>1d040f3</code></a>
Use Var wrapper only for Pointer formatting</li>
<li><a
href="6a6132d79b"><code>6a6132d</code></a>
Extend no-display ui test to cover another fmt trait</li>
<li><a
href="a061beb9dc"><code>a061beb</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/thiserror/issues/383">#383</a>
from dtolnay/both</li>
<li><a
href="63882935be"><code>6388293</code></a>
Support Display and Debug of same path in error message</li>
<li><a
href="dc0359eeec"><code>dc0359e</code></a>
Defer binding_value construction</li>
<li><a
href="520343e37d"><code>520343e</code></a>
Add test of Debug and Display of paths</li>
<li><a
href="49be39dee1"><code>49be39d</code></a>
Release 2.0.2</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/thiserror/compare/1.0.69...2.0.3">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [shadow-rs](https://github.com/baoyachi/shadow-rs) from 0.35.2 to
0.36.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/baoyachi/shadow-rs/releases">shadow-rs's
releases</a>.</em></p>
<blockquote>
<h2>v0.36.0</h2>
<h2>What's Changed</h2>
<ul>
<li>feat(HookExt): Add extended hook functionality with custom deny
lists by <a
href="https://github.com/baoyachi"><code>@baoyachi</code></a> in <a
href="https://redirect.github.com/baoyachi/shadow-rs/pull/190">baoyachi/shadow-rs#190</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.35.2...v0.36.0">https://github.com/baoyachi/shadow-rs/compare/v0.35.2...v0.36.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="909510eb5d"><code>909510e</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/190">#190</a>
from baoyachi/hook_ext</li>
<li><a
href="bad046d7a0"><code>bad046d</code></a>
Update Cargo.toml</li>
<li><a
href="84096a02c0"><code>84096a0</code></a>
feat(HookExt): Add extended hook functionality with custom deny
lists</li>
<li>See full diff in <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.35.2...v0.36.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
What it says on the tin, this change adds the `mac` and `ip` columns to
the `sys net` command, where `mac` is the interface mac address and `ip`
is a record containing ipv4 and ipv6 addresses as well as whether or not
the address is loopback and multicast. I thought it might be useful to
have this information available in Nushell. This change basically just
pulls extra information out of the underlying structs in the
`sysinfo::Networks` struct. Here's a screenshot from my system:
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Adds `mac` and `ip` columns to the `sys net` command, where `mac`
contains the interface's mac address and `ip` contains information
extracted from the `std::net::IpAddr` struct, including address,
protocol, whether or not the address is loopback, and whether or not
it's multicast
# Tests + Formatting
Didn't add any tests specifically, didn't seem like there were any
relevant tests. Ran existing tests and formatting.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# Description
I was reading through the documentation yesterday, when I stumbled upon
[this
section](https://www.nushell.sh/book/pipelines.html#behind-the-scenes)
explaining how command output is formatted using the `table` command. I
was surprised that this section didn't mention the `display_output`
hook, so I took a look in the code and was shocked to discovered that
the documentation was correct, and the `table` command _is_
automatically applied to printed pipelines.
This auto-tabling has two ramifications for the `display_output` hook:
1. The `table` command is called on the output of a pipeline after the
`display_output` has run, even if `display_output` contains the table
command. This means each pipeline output is roughly equivalent to the
following (using `ls` as an example):
```nushell
ls | do $config.hooks.display_output | table
```
2. If `display_output` returns structured data, it will _still_ be
formatted through the table command.
This PR removes the auto-table when the `display_output` hook is set.
The auto-table made sense before `display_output` was introduced, but to
me, it now seems like unnecessary "automagic" which can be accomplished
using existing Nushell features.
This means that you can now pull back the curtain a bit, and replace
your `display_output` hook with an empty closure
(`$env.config.hooks.display_output = {||}`, setting it to null retains
the previous behavior) to see the values printed normally without the
table formatting. I think this is a good thing, and makes it easier to
understand Nushell fundamentals.
It is important to note that this PR does not change how `print` and
other commands (well, specifically only `watch`) print out values. They
continue to use `table` with no arguments, so changing your
config/`display_output` hook won't affect what `print`ing a value does.
Rel: [Discord
discussion](https://discord.com/channels/601130461678272522/615329862395101194/1307102690848931904)
(cc @dcarosone)
# User-Facing Changes
Pipelines are no longer automatically formatted using the `table`
command. Instead, the `display_output` hook is used to format pipeline
output. Most users should see no impact, as the default `display_output`
hook already uses the `table` command.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Will update mentioned docs page to call out `display_output` hook.
# Description
Bump `quick-xml` to `0.37.0`.
This came about rebasing `nushell` in Fedora, which now has `quick-xml`
0.36.
There is one breaking change in 0.33 as far as `nu-command` is
concerned, in that `Event::PI` is now a dedicated `BytesPI` type:
https://github.com/tafia/quick-xml/blob/master/Changelog.md#misc-changes-5
I've tested compiling and testing locally with `0.33.0`, `0.36.0` and
`0.37.0` - but let's future-proof by requiring `0.37.0`.
# User-Facing Changes
N/A
# Tests + Formatting
No additional tests required, existing tests pass
# After Submitting
N/A
Signed-off-by: Michel Lind <salimma@fedoraproject.org>
# Description
Closes: #14248
# User-Facing Changes
Added a `--default` flag to input command, and it also added an extra
output to prompt:
```
> let x = input -d 18 "input your age"
input your age (default: 18)
> $x
18
> let x = input -d 18
> $x
18
```
# Tests + Formatting
I don't think it's easy to add a test for it :-(
# Description
This PR updates the uutils/coreutils crates to the latest version. I
hard-coded debug to false, a new uu_mv parameter. It may be interesting
to add that but I just wanted to get all the uu crates on the same
version.
I had to update the tests because --no-clobber works but doesn't say
anything when it's not clobbering and previously we were checking for an
error message.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Part of https://github.com/nushell/nushell/issues/11549
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds a `utouch` command that uses the `touch` command from
https://github.com/uutils/coreutils. Eventually, `utouch` may be able to
replace `touch`.
The conflicts in Cargo.lock and Cargo.toml are because I'm using the
uutils/coreutils main rather than the latest release, since the changes
that expose `uu_touch`'s internal functionality aren't available in the
latest release.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users will have access to a new `utouch` command with the following
flags:
todo
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# User-Facing Changes
The parser now errors on more invalid command signatures:
```nushell
# expected parameter or flag
def foo [ bar: int: ] {}
# expected type
def foo [ bar: = ] {}
def foo [ bar: ] {}
# expected default value
def foo [ bar = ] {}
```
A more involved solution to the issue pointed out
[here](https://github.com/nushell/nushell/pull/14337#issuecomment-2480392373)
# Description
With `--to-table`
- cell-path groupers are used to create column names, similar to
`select`
- closure groupers result in columns named `closure_{i}` where `i` is
the index of argument, with regards to other closures i.e. first closure
grouper results in a column named `closure_0`
Previously
- `group-by foo {...} {...}` => `table<foo, group1, group2, items>`
- `group-by {...} foo {...}` => `table<group0, foo, group2, items>`
With this PR
- `group-by foo {...} {...}` => `table<foo, closure_0, closure_1,
items>`
- `group-by {...} foo {...}` => `table<closure_0, foo, closure_1,
items>`
- no grouper argument results in a `table<group, items>` as previously
On naming conflicts caused by cell-path groupers named `items` or
`closure_{i}`, an error is thrown, suggesting to use a closure in place
of a cell-path.
```nushell
❯ ls | rename items | group-by items --to-table
Error: × grouper arguments can't be named `items`
╭─[entry #3:1:29]
1 │ ls | rename items | group-by items --to-table
· ────────┬────────
· ╰── contains `items`
╰────
help: instead of a cell-path, try using a closure
```
And following the suggestion:
```nushell
❯ ls | rename items | group-by { get items } --to-table
╭─#──┬──────closure_0──────┬───────────────────────────items────────────────────────────╮
│ 0 │ CITATION.cff │ ╭─#─┬────items─────┬─type─┬─size──┬───modified───╮ │
│ │ │ │ 0 │ CITATION.cff │ file │ 812 B │ 3 months ago │ │
│ │ │ ╰─#─┴────items─────┴─type─┴─size──┴───modified───╯ │
│ 1 │ CODE_OF_CONDUCT.md │ ╭─#─┬───────items────────┬─type─┬──size───┬───modified───╮ │
...
```
# Description
In certain situations, we had ansi bleed on the right prompt. This PR
fixes that by prefixing the right prompt with an ansi reset `\x1b[0m`.
This PR also adds some --log-level warn logging so we can see the ansi
escapes that form the prompts.
Closes https://github.com/nushell/nushell/issues/14268
# Description - fixes#14174
This PR addresses a bug in the `seq char` command where the command's
behavior did not align with its help description, which stated that it
prints a sequence of ASCII characters. The initial implementation only
allowed alphabetic characters, leading to user confusion when
non-alphabetic characters (e.g., digits, punctuation) were rejected or
when unexpected behavior occurred for certain input ranges.
### Changes Made:
- **Updated the input validation**: Modified the `is_single_character`
function to accept any ASCII character instead of restricting to
alphabetic characters.
- **Enhanced error messages**: Clarified error messages to specify that
any single ASCII character is acceptable.
- **Expanded functionality**: Ensured that the command can now generate
sequences that include non-alphabetic ASCII characters.
- **Updated tests**: Added tests to cover new use cases involving
non-alphabetic characters and improved validation.
### Examples After Fix:
- `seq char '0' '9'` now outputs `['0', '1', '2', '3', '4', '5', '6',
'7', '8', '9']`
- `seq char ' ' '/'` outputs a list of characters from space to `/`
- `seq char 'A' 'z'` correctly includes alphabetic and non-alphabetic
characters between `A` and `z`
# User-Facing Changes
- Users can now input any single ASCII character for the `start` and
`end` parameters of `seq char`.
- The output will accurately include all characters within the specified
ASCII range, including digits and punctuation.
# Tests + Formatting
- Added new tests to ensure the `seq char` command supports sequences
including non-alphabetic ASCII characters.
Trying to reduce lint allows either by checking if they are former false
positives or by fixing the underlying warning.
- **Remove dead `allow(dead_code)`**
- **Remove recursive dead code**
- **Remove dead code**
- **Move test only functions to test module**
The unit tests that use them, themselves are somewhat sus in that they
mock the usage and not test specificly used methods of the
implementation, so there is a risk for divergence
- **Remove `clippy::uninit_vec` allow.**
May have been a false positive, or the impl has changed somewhat.
We certainly want to look at the unsafe code here to vet for
correctness.
# Description
This PR tries to correct the problem of nushell scripts being made
executable on Windows systems. In order to do this, these steps need to
take place.
1. `assoc .nu=nuscript`
2. `ftype nuscript=C:\path\to\nu.exe '%1' %*`
3. modify the env var PATHEXT by appending `;.NU` at the end
Once those steps are done and this PR is landed, one should be able to
create a script such as this.
```nushell
❯ open im_exe.nu
def main [arg] {
print $"Hello ($arg)!"
}
```
Then they should be able to do this to run the nushell script.
```nushell
❯ im_exe Nushell
Hello Nushell!
```
Under-the-hood, nushell is shelling out to cmd.exe in order to run the
nushell script.
# User-Facing Changes
closes#13020
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Release Notes Excerpt
* Hooks now default to an empty value of the proper type (e.g., `[]` or
`{}`) when not otherwise specified
# Description
```nushell
# Start with no config
nu -n
# Populate with defaults
$env.config = {}
$env.config.hooks
```
* Before: All hooks other than `display_output` were set to `null`.
Attempting to append a hook using `++=` would fail unless it had already
been assigned.
* After:
* `pre_prompt`, `pre_execution`, and `command_not_found` are set to
empty lists. This allows the user to simply append new hooks using
`++=`.
* `env_change` is set to an empty record. This allows the user to add
new hooks using `merge`, although a "helper" command would still be
useful (TODO: stdlib).
Also fixed a typo in an error message.
# User-Facing Changes
There shouldn't be any breaking changes since (before) there were no
guarantees of the hook's value/type. Previously, users would have to
check for `null` and `default` to an empty list before appending. Any
user-strategies for dealing with the problem should continue to work
after this change.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Note that, for reasons I cannot ascertain, this PR appears to have
*fixed* the `command_not_found_error_recognizes_non_executable_file`
test that was previously broken by #12953. That PR essentially rewrote
the test to match the new behavior, but it no longer tested what it was
intended to test.
Now, the test is working again as designed (and as it works in the
REPL).
# After Submitting
This will be covered in the Configuration update for #14249. This PR
will simplify several examples in the doc.
Adds support for converting from polars decimal type to nushell values.
This fix works by first converting a polars decimal series to an f64
series, then converting to Value::Float
Co-authored-by: Jack Wright <jack.wright@nike.com>
# Description
Removes the `NU_DISABLE_IR` option and some code related to evaluating
blocks with the AST
evaluator.
Does not entirely remove the AST evaluator yet. We still have some
dependencies on expression
evaluation in a few minor places which will take a little bit of effort
to fix.
Also changes `debug profile` to always include instructions, because the
output is a little
confusing otherwise, and removes the different options for
instructions/exprs.
# User-Facing Changes
- `NU_DISABLE_IR` no longer has any effect, and is removed. There is no
way to use the AST
evaluator.
- `debug profile` no longer has `--exprs`, `--instructions` options.
- `debug profile` lists `pc` and `instruction` columns by default now.
# Tests + Formatting
Eval tests fixed to only use IR.
# After Submitting
- [ ] release notes
- [ ] finish removing AST evaluator, come up with solutions for the
expression evaluation.
Fixes#14265
# User-Facing Changes
`ls` without a path argument now errors when the current working
directory is unreadable due to missing permissions:
```diff
mkdir foo
chmod 100 foo
cd foo
ls | to nuon
-[]
+Error: × Permission denied
```
Fixes#13267
As we can see from the bisect done in the comments.
Bisected to https://github.com/nushell/nushell/pull/12625 /
460a1c8f87
We can see that this update brought the use of `read_dir` and for it, it
is mentioned in the [rust
docs](https://doc.rust-lang.org/std/fs/fn.read_dir.html#platform-specific-behavior)
that it does **not** provide any specific order of files.
As was the advice there, I went and applied a manual `sort` to the
entries and tested it manually on my local machine.
If required I could probably try and add tests for the order
consistency, would need some time to find my way around them, so I'm
sending the PR first.
# Description
`test_iteration_errors` no longer requires `/root` to exist:
```
failures:
---- test::test_iteration_errors stdout ----
thread 'test::test_iteration_errors' panicked at crates/nu-glob/src/li
b.rs:1151:13:
assertion failed: next.is_some()
```
`/root` is an optional home directory in the [File Hierarchy
Standard][1].
I encountered this while running the tests in a `guix shell` container,
which doesn't include a root user.
[1]: https://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch03s14.html
# User-Facing Changes
None
# Description
Fixes#14294 - Turned out to be a whole lot easier than I expected, but
please double-check me on this, since it's an area I haven't been in
before.
# User-Facing Changes
Allow date to be added to a duration type.
# Tests + Formatting
Tests added:
* Duration + Date is allowed
* Duration - Date is not allowed
@sholderbach suggested that we need to have a test for a function can't
use mutable variable.
https://github.com/nushell/nushell/pull/14311#issuecomment-2470035194
So this pr is going to add a case for it.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Bump version to `0.100.0`
# User-Facing Changes
The new release `v0.100.0` is coming...
# Description
In #14291, I misunderstood the use-case for `into binary` with `http
post`. Thanks again to @weirdan for steering me straight on that. This
reverts the example that I changed and adds a new one for uploading text
files.
# User-Facing Changes
Doc-only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fixes test which was ignored in #14297. Also fixes related example.
Tests now use local timezone to match actual result.
More discussion in #14266
# User-Facing Changes
Tests-only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Since the human-date-parser was switched to use the users local
timezone, this test may not be needed anymore. I've just ignored it for
now and put a comment about why it's being ignored.
There are more discussions on this topic here
https://github.com/nushell/nushell/pull/14266
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Thanks to @weirdan [in
Discord](https://discord.com/channels/601130461678272522/614593951969574961/1304508148207583345)
for pointing out that correct syntax for `http post --content-type
multipart/form-data`.
The existing example was incomplete, so I've updated it.
# User-Facing Changes
Doc-only
# Tests + Formatting
`toolkit test` currently seems to be broken, so relying on CI
# After Submitting
N/A
# Description
Fixes: #14110Fixes: #14087
I think it's ok to not generating instruction to `def` and `export def`
call. Because they just return `PipelineData::Empty` without doing
anything.
If nushell generates instructions for `def` and `export def`, nushell
will try to capture variables for these block. It's not the time to do
this.
# User-Facing Changes
```
nu -c "
def bar [] {
let x = 1
($x | foo)
}
def foo [] {
foo
}
"
```
Will no longer raise error.
# Tests + Formatting
Added 4 tests
# Description
This PR fixes a problem where not equal in polars wasn't working with
strings.
## Before
```nushell
let a = ls | polars into-df
$a.type != "dir"
Error: nu:🐚:type_mismatch
× Type mismatch during operation.
╭─[entry #16:1:1]
1 │ $a.type != "dir"
· ─┬ ─┬ ──┬──
· │ │ ╰── string
· │ ╰── type mismatch for operator
· ╰── NuDataFrame
╰────
```
## After
```nushell
let a = ls | polars into-df
$a.type != "dir"
╭──#──┬─type──╮
│ 0 │ false │
│ 1 │ false │
│ 2 │ false │
...
```
/cc @ayax79 to make sure I did this right.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fixes#13776
# User-Facing Changes
Arguments to aliased externals no longer include nested import paths:
```diff
module foo { export alias bar = ^echo }
use foo
foo bar baz
-bar baz
+baz
```
# User-Facing Changes
Table literal arguments to list parameters are now correctly parsed:
```diff
def a [l: list<any>] { $l | to nuon }; a [[a]; [2]]
-[[a]]
+[[a]; [2]]
```
Addresses the following points from #14162
> - There is no built-in counterpart to url build-query for splitting a
query string
There is `from url`, which, due to naming, is a little hard to discover
and suffers from the following point
> - url parse can create records with duplicate keys
> - url parse's params should either:
> - ~group the same keys into a list.~
> - instead of a record, be a key-value table. (table<key: string,
value: string>)
# Description
## `url split-query`
Counterpart to `url build-query`, splits a url encoded query string to
key value pairs, represented as `table<key: string, value: string>`
```
> "a=one&a=two&b=three" | url split-query
╭───┬─────┬───────╮
│ # │ key │ value │
├───┼─────┼───────┤
│ 0 │ a │ one │
│ 1 │ a │ two │
│ 2 │ b │ three │
╰───┴─────┴───────╯
```
## `url parse`
The output's `param` field is now a table as well, mirroring the new
`url split-query`
```
> 'http://localhost?a=one&a=two&b=three' | url parse
╭──────────┬─────────────────────╮
│ scheme │ http │
│ username │ │
│ password │ │
│ host │ localhost │
│ port │ │
│ path │ / │
│ query │ a=one&a=two&b=three │
│ fragment │ │
│ │ ╭───┬─────┬───────╮ │
│ params │ │ # │ key │ value │ │
│ │ ├───┼─────┼───────┤ │
│ │ │ 0 │ a │ one │ │
│ │ │ 1 │ a │ two │ │
│ │ │ 2 │ b │ three │ │
│ │ ╰───┴─────┴───────╯ │
╰──────────┴─────────────────────╯
```
# User-Facing Changes
- `url parse`'s output has the mentioned change, which is backwards
incompatible.
# Description
This PR tries to fix https://github.com/nushell/nushell/issues/14195 by
setting the local time and timezone after conversion without changing
the time.
### Before
```nushell
❯ 'in 10 minutes' | into datetime
Tue, 5 Nov 2024 12:59:58 -0600 (in 9 minutes)
❯ 'yesterday' | into datetime
Sun, 3 Nov 2024 18:00:00 -0600 (2 days ago)
❯ 'tomorrow' | into datetime
Tue, 5 Nov 2024 18:00:00 -0600 (in 5 hours)
❯ 'today' | into datetime
Mon, 4 Nov 2024 18:00:00 -0600 (18 hours ago)
```
### After (these are correct)
```nushell
❯ 'in 10 minutes' | into datetime
Tue, 5 Nov 2024 12:58:44 -0600 (in 9 minutes)
❯ 'yesterday' | into datetime
Mon, 4 Nov 2024 12:49:04 -0600 (a day ago)
❯ 'tomorrow' | into datetime
Wed, 6 Nov 2024 12:49:20 -0600 (in a day)
❯ 'today' | into datetime
Tue, 5 Nov 2024 12:52:06 -0600 (now)
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.26.8 to
1.27.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.27.0</h2>
<h2>[1.27.0] - 2024-11-01</h2>
<h3>Features</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1106">October
2024</a> changes</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.27.0] - 2024-11-01</h2>
<h3>Features</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1106">October
2024</a> changes</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d01f29c66d"><code>d01f29c</code></a>
chore: Release</li>
<li><a
href="52e950bb13"><code>52e950b</code></a>
chore: Release</li>
<li><a
href="19cfc03ea4"><code>19cfc03</code></a>
docs: Update changelog</li>
<li><a
href="f80b1564bd"><code>f80b156</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1140">#1140</a>
from epage/oct</li>
<li><a
href="6b5c8079a9"><code>6b5c807</code></a>
feat(dict): Oct updates</li>
<li><a
href="d64f202a88"><code>d64f202</code></a>
chore(deps): Update compatible (<a
href="https://redirect.github.com/crate-ci/typos/issues/1137">#1137</a>)</li>
<li><a
href="e903c46287"><code>e903c46</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1136">#1136</a>
from PigeonF/PigeonF/push-mlqnlvmswwmp</li>
<li><a
href="b994765ef9"><code>b994765</code></a>
chore: Fix typo "potemtial" -> "potential"</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.26.8...v1.27.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Wind <WindSoilder@outlook.com>
# Description
Follow-up to #13842. In that commit, using one of the `dirs`/`shells`
aliases would notify the user that it would no longer be autoloaded in
future releases. This is the removal stage.
Side-benefit: Additional 1ms+ load time improvement
# User-Facing Changes
Breaking-change - `dirs` aliases are no longer autoloaded.
Users can either choose to continue using the aliases by adding the
following to the startup:
```nu
use std/dirs shells-aliases *
```
Alternatively, users can use the `dirs` subcommands (rather than the
aliases) with:
```nu
use std/dirs
```
# Description
Fixes#14151 where `to text` treats list streams and lists values
differently.
# User-Facing Changes
New line is always added after items in a list or record except for the
last item if the `--no-newline` flag is provided.
# Description
Turns out there are duplicate conversion functions: `as_i64` and
`as_f64`. In most cases, these can be replaced with `as_int` and
`as_float`, respectively.
# Description
Fixes: https://github.com/nushell/nushell/issues/13425
It's just a follow up to #13958.
User input can be a directory, in this case, we need to use the return
value of `find_in_dirs_env` carefully, so in case, I renamed
maybe_file_path to maybe_file_path_or_dir to emphasize it.
# User-Facing Changes
`$env.FILE_PWD` and `$env.CURRENT_FILE` will be more reliable to use.
# Tests + Formatting
Added 2 tests
With #14083 a dependency on `test-case` was introduced, we already
depend on the more exp(a/e)nsive `rstest` for our macro-based test case
generation (with fixtures on top)
To save on some compilation for proc macros unify to `rstest`
# Description
Dividing two ints can currently return either an int or a float. Not
having a single return type for an operation between two types seems
problematic. Additionally, the type signature for division says that
dividing two ints returns only an int which does not match the current
implementation (it can also return a float). This PR changes division
between almost all types to return a float (except for `filesize /
number` or `duration / number`, since there are no float representations
for these types).
Currently, floor division between certain types is not implemented even
though the type signature allows it. Also, the current implementation of
floor division uses a combination of clamping and flooring rather than
simply performing floor division which this PR fixes. Additionally, the
signature was changed so that `int // float`, `float // int`, and `float
// float` now return float instead of int. This matches the automatic
float promotion in the rest of the operators (as well as how Python does
floor division which I think is the original inspiration).
Since regular division has always returned fractional values (and now
returns a float to reflect that), `mod` is now defined in terms of floor
division. That is, `D // d = q`, `D mod d = r`, and `D = d * q + r `.
This is just like the `%` operator in Python, which is also based off
floor division (at least for ints and floats). Additionally,
implementations missing from `mod`'s current type signature have been
added (`duration mod int` and `duration mod float`).
This PR also overhauls the overflow checking and errors for div, mod,
and floor div. If an operation overflows, it will now cause an error.
# User-Facing Changes
- Div now returns a float in most cases.
- Floor division now actually does floor division.
- Floor division now does automatic float promotion, returning a float
in more instances.
- Floor division now actually allows division with filesize and
durations as its type signature claimed.
- Mod is now defined and implemented in terms of floor division rather
than truncating division.
- Mod now actually allows filesize and durations as its type signature
claimed.
- Div, mod, and floor div now all have proper overflow checks.
## Examples
When the divisor and the dividend have the same sign, the quotient and
remainder will be the same as before. (Except that this PR will give
more accurate results, since it does not do an intermediate float
conversion). If the signs of the divisor and dividend are different,
then the results will be different, or rather actually correct.
Before:
```nu
let q = 8 // -3 # -3
let r = 8 mod -3 # 2
8 == $q * -3 + $r # false
```
After:
```nu
let q = 8 // -3 # -3
let r = 8 mod -3 # -1
8 == $q * -3 + $r # true
```
Before:
```nu
let q = -8 // 3 # -3
let r = -8 mod 3 # -2
-8 == $q * 3 + $r # false
```
After:
```nu
let q = -8 // 3 # -3
let r = -8 mod 3 # 1
-8 == $q * 3 + $r # true
```
# Tests + Formatting
Added a few tests.
# After Submitting
Probably update the docs.
Fixes#14145
# User-Facing Changes
An empty rest match would be `null` previously. Now it will be an empty
list.
This is a breaking change for any scripts relying on the old behavior.
Example script:
```nu
match [1] {
[_ ..$rest] => {
match $rest {
null => { "old" }
[] => { "new" }
}
}
}
```
This expression would evaluate to "old" on current nu versions and "new"
with this patch.
# Description
Fixes#14222. The ability to set duration unit for `--max-time` when using the `http`
command util.
Signed-off-by: Alex Johnson <alex.kattathra.johnson@gmail.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds --no-deref flag to `touch`. Nice and backwards compatible, and I
get to touch symlinks. I still don't get to set their dates directly,
but maybe that'll come with utouch.
Some sadness in the implementation, since `set_symlink_file_times`
doesn't take Option values and we call it twice with the old "read"
values from reference (or now, if missing). This shouldn't be a big
concern since `touch` already did two calls if you set both mtime and
atime. Also, `--no-deref` applies both to the reference file, and to the
target file. No splitting them up, because that's silly.
Can always bikeshed. I nicked `--no-deref` from the uutils flag, and
made the short flag `-d` because it obviously can't be `-h`. I thought
of `-S` like in `glob`, for the "negative/filter out" uppercase short
letters. Ultimately I don't think it matters much.
Should fix#14212 since it's not really tied to uutils, besides the
comment about setting a `datetime` value directly.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New flag.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Maybe.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes: #13362
This PR fixes the `Display` impl for `CellPath`, as laid out in #13362
and #14090:
```nushell
> $.0."0"
$.0."0"
> $."foo.bar".baz
$."foo.bar".baz
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Cell-paths are now printed using the same `$.` notation that is used to
create them, and ambiguous column names are properly quoted.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
verb 'setup' -> 'set up'
setup as verb [is a misspelling of set
up](https://en.wiktionary.org/wiki/setup#Verb)
* [verb: set up](https://en.wiktionary.org/wiki/set_up)
* [noun: setup](https://en.wiktionary.org/wiki/setup)
*I split this from #14229 typo corrections because 'setup' is not as
clear-cut wrong. Having read the dictionary pages (linked) I'm even more
confident in this change being correct rather than only subjectively
better.*
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Fixes: #14202
After looking into the issue, I think #13910 it's not good to cut the
span if it's in external argument.
This pr is somehow revert the change, and fix
https://github.com/nushell/nushell/issues/13431 in another way.
It introduce a new state named `State::BackTickQuote`, so if an external
arg include backtick quote, it enters the state, so backtick quote won't
be the body of a string.
# User-Facing Changes
### Before
```nushell
> ^echo `(echo aa)`
aa
> ^echo `"aa"` # maybe it's not right to remove the inner quote.
aa
```
### After
```nushell
> ^echo `(echo aa)`
(echo aa)
> ^echo `"aa"` # inner quote is keeped if there are backtick quote outside.
"aa"
```
# Tests + Formatting
Added 3 tests.
I feel like the limitations on what can be bound are too strict.
if an app _does_ support the Kitty keyboard protocol (Neovim,
Reedline), I can map the function keys (F27-F35 as listed below).
In Reedline everything works perfectly. The issue is for some reason we
limit the keys that can be bound in Nushell, so I am unable to do that.
Bumps [fancy-regex](https://github.com/fancy-regex/fancy-regex) from
0.13.0 to 0.14.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/fancy-regex/fancy-regex/releases">fancy-regex's
releases</a>.</em></p>
<blockquote>
<h2>0.14.0</h2>
<h3>Added</h3>
<ul>
<li>Add <code>split</code>, <code>splitn</code> methods to
<code>Regex</code> to split a string into substrings (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/140">#140</a>)</li>
<li>Add <code>case_insensitive</code> method to
<code>RegexBuilder</code> to force case-insensitive mode (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/132">#132</a>)</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Bump bit-set dependency to 0.8 (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/139">#139</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/fancy-regex/fancy-regex/blob/main/CHANGELOG.md">fancy-regex's
changelog</a>.</em></p>
<blockquote>
<h2>[0.14.0] - 2024-10-24</h2>
<h3>Added</h3>
<ul>
<li>Add <code>split</code>, <code>splitn</code> methods to
<code>Regex</code> to split a string into substrings (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/140">#140</a>)</li>
<li>Add <code>case_insensitive</code> method to
<code>RegexBuilder</code> to force case-insensitive mode (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/132">#132</a>)</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Bump bit-set dependency to 0.8 (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/139">#139</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="810a8f3c16"><code>810a8f3</code></a>
Version 0.14.0</li>
<li><a
href="33597bdd7b"><code>33597bd</code></a>
Merge pull request <a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/145">#145</a>
from fancy-regex/bump-tarpaulin</li>
<li><a
href="1a6c0f813d"><code>1a6c0f8</code></a>
Bump tarpaulin</li>
<li><a
href="2f0f000de9"><code>2f0f000</code></a>
Merge pull request <a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/144">#144</a>
from k94-ishi/dev/splitn</li>
<li><a
href="689a845112"><code>689a845</code></a>
Merge pull request <a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/132">#132</a>
from jonperry-dev/casing_option</li>
<li><a
href="f0183b46a6"><code>f0183b4</code></a>
fix check</li>
<li><a
href="988b357493"><code>988b357</code></a>
fmt</li>
<li><a
href="52105243c1"><code>5210524</code></a>
moved tests to tests/regex_options.rs</li>
<li><a
href="ce4ab06ee3"><code>ce4ab06</code></a>
fmt</li>
<li><a
href="1039f71083"><code>1039f71</code></a>
added self to authors</li>
<li>Additional commits viewable in <a
href="https://github.com/fancy-regex/fancy-regex/compare/0.13.0...0.14.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [unicase](https://github.com/seanmonstar/unicase) from 2.7.0 to
2.8.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d98191176d"><code>d981911</code></a>
v2.8.0</li>
<li><a
href="b825f9ed9f"><code>b825f9e</code></a>
upgrade to unicode 16</li>
<li><a
href="a86a4669aa"><code>a86a466</code></a>
update to 2018 edition</li>
<li><a
href="8dc84ec6f1"><code>8dc84ec</code></a>
Make license metadata SPDX compliant</li>
<li><a
href="07f81c14cd"><code>07f81c1</code></a>
feat: add to_folded_case() method</li>
<li>See full diff in <a
href="https://github.com/seanmonstar/unicase/compare/v2.7.0...v2.8.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
