Commit Graph

908 Commits

Author SHA1 Message Date
Daniel Buch Hansen
850ecf648a
Protocol: debug_assert!() Span to reflect a valid slice (#6806)
Also enforce this by #[non_exhaustive] span such that going forward we
cannot, in debug builds (1), construct invalid spans.

The motivation for this stems from #6431 where I've seen crashes due to
invalid slice indexing.

My hope is this will mitigate such senarios

1. https://github.com/nushell/nushell/pull/6431#issuecomment-1278147241

# Description

(description of your pull request here)

# Tests

Make sure you've done the following:

- [ ] Add tests that cover your changes, either in the command examples,
the crate/tests folder, or in the /tests folder.
- [ ] Try to think about corner cases and various ways how your changes
could break. Cover them with tests.
- [ ] If adding tests is not possible, please document in the PR body a
minimal example with steps on how to reproduce so one can verify your
change works.

Make sure you've run and fixed any issues with these commands:

- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [ ] `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- [ ] `cargo test --workspace --features=extra` to check that all the
tests pass

# Documentation

- [ ] If your PR touches a user-facing nushell feature then make sure
that there is an entry in the documentation
(https://github.com/nushell/nushell.github.io) for the feature, and
update it if necessary.
2022-12-03 11:44:12 +02:00
Reilly Wood
3ac36879e0
Handle ctrl-c in RawStream iterator (#7314)
Fixes #7246 and #1898.

Darren noticed that `open /dev/random` could not be interrupted by
`ctrl+c`. Thankfully the solution was very simple; it looks like we just
forgot to check `ctrlc` in the `impl Iterator for RawStream`!

To reproduce this, just run `open /dev/random` and then cancel it with
`ctrl+c`.
2022-12-02 08:00:56 -08:00
Leon
f491d3e1e1
Rename $env.config.explore_config to $env.config.explore (for consistency with $env.config.ls, $env.config.table etc.) (#7317)
# Description

* `$env.config.explore_config` renamed to `$env.config.explore`. This
follows the principle that config subrecords relating to single commands
(as this relates to `explore`) should be exactly named after the command
(see `ls`, `rm`, `table` etc.)
* In `into_config()`, moved the match arm relating to
`$env.config.explore` out of the "legacy options" section (which is
slated for removal in a later version).

# User-Facing Changes

`explore` is not in any public releases yet, so this has no end-user
impact.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-02 01:42:18 -05:00
Maxim Zhiburt
718ee3d545
[MVP][WIP] less like pager (#6984)
Run it as `explore`.

#### example

```nu
ls | explore
```

Configuration points in `config.nu` file.
```
  # A 'explore' utility config
   explore_config: {
     highlight: { bg: 'yellow', fg: 'black' }
     status_bar: { bg: '#C4C9C6', fg: '#1D1F21' }
     command_bar: { fg: '#C4C9C6' }
     split_line: '#404040'
     cursor: true
     # selected_column: 'blue'
     # selected_row: { fg: 'yellow', bg: '#C1C2A3' }
     # selected_cell: { fg: 'white', bg: '#777777' }
     # line_shift: false,
     # line_index: false,
     # line_head_top: false,
     # line_head_bottom: false,
   }
```

You can start without a pipeline and type `explore` and it'll give you a
few tips.

![image](https://user-images.githubusercontent.com/343840/205088971-a8c0262f-f222-4641-b13a-027fbd4f5e1a.png)

If you type `:help` you an see the help screen with some information on
what tui keybindings are available.

![image](https://user-images.githubusercontent.com/343840/205089461-c4c54217-7ec4-4fa0-96c0-643d68dc0062.png)

From the `:help` screen you can now hit `i` and that puts you in
`cursor` aka `inspection` mode and you can move the cursor left right up
down and it you put it on an area such as `[table 5 rows]` and hit the
enter key, you'll see something like this, which shows all the `:`
commands. If you hit `esc` it will take you to the previous screen.

![image](https://user-images.githubusercontent.com/343840/205090155-3558a14b-87b7-4072-8dfb-dc8cc2ef4943.png)

If you then type `:try` you'll get this type of window where you can
type in the top portion and see results in the bottom.

![image](https://user-images.githubusercontent.com/343840/205089185-3c065551-0792-43d6-a13c-a52762856209.png)

The `:nu` command is interesting because you can type pipelines like
`:nu ls | sort-by type size` or another pipeline of your choosing such
as `:nu sys` and that will show the table that looks like this, which
we're calling "table mode".

![image](https://user-images.githubusercontent.com/343840/205090809-e686ff0f-6d0b-4347-8ed0-8c59adfbd741.png)

If you hit the `t` key it will now transpose the view to look like this.

![image](https://user-images.githubusercontent.com/343840/205090948-a834d7f2-1713-4dfe-92fe-5432f287df3d.png)

In table mode or transposed table mode you can use the `i` key to
inspect any collapsed field like `{record 8 fields}`, `[table 16 rows]`,
`[list x]`, etc.

One of the original benefits was that when you're in a view that has a
lot of columns, `explore` gives you the ability to scroll left, right,
up, and down.

`explore` is also smart enough to know when you're in table mode versus
preview mode. If you do `open Cargo.toml | explore` you get this.

![image](https://user-images.githubusercontent.com/343840/205091822-cac79130-3a52-4ca8-9210-eba5be30ed58.png)

If you type `open --raw Cargo.toml | explore` you get this where you can
scroll left, right, up, down. This is called preview mode.

![image](https://user-images.githubusercontent.com/343840/205091990-69455191-ab78-4fea-a961-feafafc16d70.png)

When you're in table mode, you can also type `:preview`. So, with `open
--raw Cargo.toml | explore`, if you type `:preview`, it will look like
this.

![image](https://user-images.githubusercontent.com/343840/205092569-436aa55a-0474-48d5-ab71-baddb1f43027.png)

Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
2022-12-01 09:32:10 -06:00
Darren Schroeder
3caab5de36
bump to dev release v0.72.1 (#7281)
# Description

Just bumping to the next dev version. Submitting as a draft until we're
ready.

# User-Facing Changes



# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-11-30 16:06:22 -06:00
Stefan Holderbach
fa97e819eb
Suggest using float on Value::Int overflow (#7253)
# Description

Suggest that floats support a larger range of values but warn about the
loss in precision.


![image](https://user-images.githubusercontent.com/15833959/204114339-c987cd47-f035-4c01-853f-e9a00441bf49.png)


(Doesn't apply to the types with associated units)

# Tests + Formatting

(-)
2022-11-29 13:30:02 -08:00
JT
9c800bcb2c
bump to 0.72 (#7272)
# Description

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-11-29 20:17:23 +13:00
Access
9850fbd77d
chore: chrono_update (#7132)
chrono version update

# Description

upgrade chrono to 0.4.23

# Major Changes

If you're considering making any major change to nushell, before
starting work on it, seek feedback from regular contributors and get
approval for the idea from the core team either on
[Discord](https://discordapp.com/invite/NtAbbGn) or [GitHub
issue](https://github.com/nushell/nushell/issues/new/choose).
Making sure we're all on board with the change saves everybody's time.
Thanks!

# Tests + Formatting

Make sure you've done the following, if applicable:

- Add tests that cover your changes (either in the command examples, the
crate/tests folder, or in the /tests folder)
- Try to think about corner cases and various ways how your changes
could break. Cover those in the tests

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass

# After Submitting

* Help us keep the docs up to date: If your PR affects the user
experience of Nushell (adding/removing a command, changing an
input/output type, etc.), make sure the changes are reflected in the
documentation (https://github.com/nushell/nushell.github.io) after the
PR is merged.

Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
2022-11-27 07:19:02 +13:00
Stefan Holderbach
2ccb91dc6a
Add logical xor operator (#7242)
We already have the binary `bit-xor` and the shortcircuiting logical
`or`(`||`) and `and`(`&&`).
This introduces `xor` as a compact form for both brevity and clarity.
You can express the operation through `not`/`and`/`or` with a slight
risk of introducing bugs through typos.

Operator precedence

`and` > `xor` > `or`

Added logic and precedence tests.
2022-11-26 17:02:37 +01:00
Darren Schroeder
3e76ed9122
add into record command (#7225)
# Description

This command converts things into records.
<img width="466" alt="Screenshot 2022-11-24 at 2 10 54 PM"
src="https://user-images.githubusercontent.com/343840/203858104-0e4445da-9c37-4c7c-97ec-68ec3515bc4b.png">

<img width="716" alt="Screenshot 2022-11-24 at 5 04 11 PM"
src="https://user-images.githubusercontent.com/343840/203872621-48cab199-ba57-44fe-8f36-9e1469b9c4ef.png">



It also converts dates into record but I couldn't get the test harness
to accept an example.

Thanks to @WindSoilder for writing the "hard" parts of this. :)


_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

Co-authored-by: WindSoilder <WindSoilder@outlook.com>
2022-11-26 09:00:47 -06:00
JT
2223fd663a
Clean up keyword lines in help (#7243)
# Description

This makes the help messages cleaner for keyword-style arguments.

Before:
```
  (optional) else_expression <Keyword([101, 108, 115, 101], Expression)>: expression or block to run if check fails
```

Now:
```
  (optional) "else" + <expression>: expression or block to run if check fails
```


# User-Facing Changes

Changes how help is printed, so we use slightly different shape names

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-11-26 20:16:39 +13:00
JT
62e34b69b3
New commands: break, continue, return, and loop (#7230)
# Description

This adds `break`, `continue`, `return`, and `loop`.

* `break` - breaks out a loop
* `continue` - continues a loop at the next iteration
* `return` - early return from a function call
* `loop` - loop forever (until the loop hits a break)

Examples:
```
for i in 1..10 {
    if $i == 5 {
       continue
    } 
    print $i
}
```

```
for i in 1..10 {
    if $i == 5 {
        break
    } 
    print $i
}
```

```
def foo [x] {
    if true {
        return 2
    }
    $x
}
foo 100
```

```
loop { print "hello, forever" }
```

```
[1, 2, 3, 4, 5] | each {|x| 
    if $x > 3 { break }
    $x
}
```

# User-Facing Changes

Adds the above commands.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-11-25 09:39:16 +13:00
WindSoilder
b662c2eb96
Make external command substitution works friendly(like fish shell, trailing ending newlines) (#7156)
# Description

As title, when execute external sub command, auto-trimming end
new-lines, like how fish shell does.

And if the command is executed directly like: `cat tmp`, the result
won't change.

Fixes: #6816
Fixes: #3980


Note that although nushell works correctly by directly replace output of
external command to variable(or other places like string interpolation),
it's not friendly to user, and users almost want to use `str trim` to
trim trailing newline, I think that's why fish shell do this
automatically.

If the pr is ok, as a result, no more `str trim -r` is required when
user is writing scripts which using external commands.

# User-Facing Changes
Before:
<img width="523" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468810-86b04dbb-c147-459a-96a5-e0095eeaab3d.png">

After:
<img width="505" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468599-7b537488-3d6b-458e-9d75-d85780826db0.png">


# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-11-23 16:51:57 +13:00
JT
74a73f9838
Stdout/Stderr redirection (#7185)
This adds new pipeline connectors called out> and err> which redirect either stdout or stderr to a file. You can also use out+err> (or err+out>) to redirect both streams into a file.
2022-11-23 07:26:13 +13:00
Martin Habovštiak
d9d6cea5a9
Make json require string and pass around metadata (#7010)
* Make json require string and pass around metadata

The json deserializer was accepting any inputs by coercing non-strings
into strings. As an example, if the input was `[1, 2]` the coercion
would turn into `[12]` and deserialize as a list containing number
twelve instead of a list of two numbers, one and two. This could lead
to silent data corruption.

Aside from that pipeline metadata wasn't passed aroud.

This commit fixes the type issue by adding a strict conversion
function that errors if the input type is not a string or external
stream. It then uses this function instead of the original
`collect_string()`. In addition, this function returns the pipeline
metadata so it can be passed along.

* Make other formats require string

The problem with json coercing non-string types to string was present in
all other text formats. This reuses the `collect_string_strict` function
to fix them.

* `IntoPipelineData` cleanup

The method `into_pipeline_data_with_metadata` can now be conveniently
used.
2022-11-20 17:06:09 -08:00
WindSoilder
d01ccd5a54
add signature information when get help on one command (#7079)
* add signature information when help on one command

* tell user that one command support operated on cell paths

Also, make type output to be more friendly, like `record<>` should just be `record`

And the same to `table<>`, which should be `table`

* simplify code

* don't show signatures for parser keyword

* update comment

* output arg syntax shape as type, so it's the same as describe command

* fix string when no positional args

* update signature body

* update

* add help signature test

* fix arg output format for composed data type like list or record

* fix clippy

* add comment
2022-11-20 07:22:42 -06:00
Leon
d89d1894d0
Add missing legacy support for config.table_index_mode. (#7170) 2022-11-20 00:46:13 -05:00
Leon
7479173811
Grouped config commands better (closes #6911) (#6983)
* Grouped config commands better

* Tweaked test slightly

* Fix merge conflict(?)

* Remove recently-added test case

* Revert rm.always_trash default

* Untweak rm help messages

* Formatting

* Remove example

* Add deprecation warning

* Remove deprecation timeline

Not sure we want to commit to a specific timeline just yet

Co-authored-by: Reilly Wood <26268125+rgwood@users.noreply.github.com>
2022-11-19 09:52:09 -08:00
Leon
4b83a2d27a
Improve CantFindColumn and ColumnAlreadyExists errors (#7164)
* Improve CantFindColumn and ColumnAlreadyExists errors

* Update tests
2022-11-19 09:35:55 -08:00
JT
6454bf69aa
Parser refactoring for improving pipelines (#7162)
* Remove lite_parse file

* Add LiteElement to represent different pipeline elem types

* Add PipelineElement to Pipelines

* Remove lite_parse specific tests
2022-11-19 10:46:48 +13:00
Leon
f856e64fb3
to html --list now returns a table (#7080)
* `to html --list` now returns a table

* Re-add screenshots link
2022-11-15 11:12:56 -06:00
Jakub Žádník
81b12d02ec
Change parser cwd when running a file (#7134)
* Change parser cwd when running a file

* Add test

* Add missing file
2022-11-15 00:05:27 +01:00
Reilly Wood
336df6c65e
Return errors on unexpected inputs to take and first (#7123)
* Fix `take` behaviour for unexpected input types

* Fix `first` behaviour for unexpected input types

* Fix copy paste mistake
2022-11-13 15:15:27 -08:00
Filip Andersson
817eacccd8
removes unused features. (#6938)
* removes unused features.

* Adds back multithreading feature to sysinfo.

* Adds back alloc for percent-encoding

* Adds updated lock file.

* Missed one sysinfo.

* `indexmap` just defaults

* Revert `miette``default-features=false`

Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
2022-11-12 18:44:56 +13:00
JT
c1105e945e
Add additional assignment operators (#7102) 2022-11-12 07:50:43 +13:00
JT
13515c5eb0
Limited mutable variables (#7089)
This adds support for (limited) mutable variables. Mutable variables are created with mut much the same way immutable variables are made with let.

Mutable variables allow mutation via the assignment operator (=).

❯ mut x = 100
❯ $x = 200
❯ print $x
200

Mutable variables are limited in that they're only tended to be used in the local code block. Trying to capture a local variable will result in an error:

❯ mut x = 123; {|| $x }
Error: nu::parser::expected_keyword (link)

  × Capture of mutable variable.

The intent of this limitation is to reduce some of the issues with mutable variables in general: namely they make code that's harder to reason about. By reducing the scope that a mutable variable can be used it, we can help create local reasoning about them.

Mutation can occur with fields as well, as in this case:

❯ mut y = {abc: 123}
❯ $y.abc = 456
❯ $y

On a historical note: mutable variables are something that we resisted for quite a long time, leaning as much as we could on the functional style of pipelines and dataflow. That said, we've watched folks struggle to work with reduce as an approximation for patterns that would be trivial to express with local mutation. With that in mind, we're leaning towards the happy path.
2022-11-11 19:51:08 +13:00
Darren Schroeder
3e56e81d06
fix plugin detection in help commands (#7088) 2022-11-10 16:12:09 -06:00
David Matos
312e9bf5d6
fix overflow on negative bytes (#7070) 2022-11-10 22:33:15 +01:00
JT
63433f1bc8
Split blocks and closures (#7075)
* Split closures and blocks

* Tests mostly working

* finish last fixes, passes all tests

* fmt
2022-11-10 21:21:49 +13:00
Leon
921a66554e
Replace all instances of 'column path' in help messages with 'cell path' (#7063)
* Rewrite all 'column path' instances to 'cell path'

* Minor tweak
2022-11-09 21:49:11 -08:00
Dan Davison
bb0d08a721
Fix command_type classification (#7074)
- Custom commands are true for builtin and custom
- Add classification as external command
- Specify wildcard in keyword: keyword is true for builtin and keyword
2022-11-09 19:09:33 -08:00
Dan Davison
fe14e52e77
Collapse some help commands columns into a single column (#7052) 2022-11-09 17:44:32 -08:00
Dan Davison
df94052180
Declare input and output types of commands (#6796)
* Add failing test that list of ints and floats is List<Number>

* Start defining subtype relation

* Make it possible to declare input and output types for commands

- Enforce them in tests

* Declare input and output types of commands

* Add formatted signatures to `help commands` table

* Revert SyntaxShape::Table -> Type::Table change

* Revert unnecessary derive(Hash) on SyntaxShape

Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
2022-11-10 10:55:05 +13:00
Darren Schroeder
2b9f258126
bump to dev release 0.71.1 (#7064) 2022-11-09 13:18:34 +01:00
JT
6cc4ef6c70
bump to 0.71, use 1.63 toolchain (#7061) 2022-11-09 06:54:00 +13:00
Per Bothner
beec658872
New "display_output" hook. (#6915)
* New "display_output" hook.

* Fix unrelated "clippy" complaint in nu-tables crate.

* Fix code-formattng and style issues in "display_output" hook

* Enhance eval_hook to return PipelineData.

This allows a hook (including display_output) to return a value.

Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
2022-11-06 13:46:40 +13:00
Alex Saveau
be5d71ea47
Run a round of clippy --fix to fix a ton of lints (#7006)
Signed-off-by: Alex Saveau <saveau.alexandre@gmail.com>

Signed-off-by: Alex Saveau <saveau.alexandre@gmail.com>
2022-11-04 15:11:17 -05:00
Stefan Holderbach
ce4ae00a6f
Remove unused dependencies (#6945)
* Remove unused dependencies

Inspired by #6938 ran `cargo +nightly udeps --features extra`.
Removes 2 crates and should remove an unnecessary intra-workspace
dependency which might open up further opportunities for compilation.

* Make windows-only dependency conditional in toml

`omnipath` is only used on Windows and already behind a `#[cfg]` block
in the code. Made the dependency in `Cargo.toml` conditional as well.

* Make `nu-pretty-hex` example a proper example

This allows making `rand` a dev-dependency in this crate.
2022-10-29 21:19:12 +02:00
WindSoilder
4f7f6a2932
Friendly error message for access beyond end (#6944)
Adds `ShellError::AccessEmptyContent`
2022-10-29 19:47:50 +02:00
Leon
5add5cbd12
Further edits to help messages (#6913) 2022-10-26 09:36:42 -07:00
Reilly Wood
e0cc2c9112
Make get 1 error message better (#6892) 2022-10-24 18:22:57 -07:00
Stefan Holderbach
92ab8b831b
Reduce required dependencies for diagnostics (#6648)
Disable backtrace on miette
- gimli crate requires several seconds
Disable diagnostics on wax
- depends on an outdated miette version

Builds fine, no observable loss in diagnostics quality of life

Removes 10 crates that have to be compiled.
2022-10-24 21:42:32 +02:00
nibon7
ebca840d91
Add support to render right prompt on last line of the prompt (#6781)
* Add support to render right prompt on last line of the prompt

* reset reedline to main branch

* update reedline to fix right prompt to be rendered correctly

* reset reedline to main branch again
2022-10-23 16:18:26 +02:00
Reilly Wood
17b2bcc125
Support range in str substring (#6867) 2022-10-23 11:42:17 +02:00
Access
c9fb381d69
feat: coredump (#6791)
fix issue in https://github.com/nushell/nushell/issues/5903
return Error to pipeline_data, if match error, then return error
directly
2022-10-22 20:24:58 +02:00
pwygab
3f555a6836
add more helpful error for calling a decl that exists in a module (#6752)
* add more helpful error for calling a decl that exists in a module

* accord to suggestions

* make error more helpful
2022-10-22 11:41:31 -05:00
pwygab
5e748ae8fc
make ++ append lists (#6766)
* make `++` append lists

* fmt

* fix for database
2022-10-20 23:28:18 +13:00
Dan Davison
50e53e788a
Simplify and reduce allocations in pipeline data loop (#6790) 2022-10-20 23:22:07 +13:00
Darren Schroeder
a724a8fe7d
bump to dev version 0.70.1 (#6814) 2022-10-20 18:04:10 +13:00
JT
9ef65dcd69
Bump to 0.70 (#6800) 2022-10-19 07:13:36 +13:00