Now, Echo converts multiple values in a ValueStream, but it simply
forwards a single Value; if no PipelineData is detected as an input, an
empty string is returned as a single Value.
Values to echo need to be extracted from the call, and then converted
into PipelineData.
I also updated the first example so that its result is a List,
as in the reference implementation.
The introduction of `use <file.nu>` added the possibility of calling
`working_set.add_file()` more than once per parse pass. Some of the
logic handling the file contents offsets prevented it from working and
hopefully, this commit fixes it.
Currently, `use spam.nu` creates a module `spam`. Therefore, after the
first `use`, it is possible to call both `use spam.nu` and `use spam`
with the same effect.
In some rare cases, the global predeclarations would clash, for example:
> module spam { export def foo [] { "foo" } }; def foo [] { "bar" }
In the example, the `foo [] { "bar" }` would get predeclared first, then
the predeclaration would be overwritten and consumed by `foo [] {"foo"}`
inside the module, then when parsing the actual `foo [] { "bar" }`, it
would not find its predeclaration.
Hiding definitions now should work correctly with repeated use of 'use',
'def' and 'hide' keywords.
The key change is that 'hide foo' will hide all definitions of foo
that were defined/used within the scope (those from other scopes are
still available). This makes the logic simpler and I found it leads to a
simpler mental map: you don't need to remember the order of defined/used
commands withing the scope -- it just hides all.
See cc3653cfd9 for more on the `-c` flag.
Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
* Fixes a panic with defining two commands with the same name caused by
declaration not found after predeclaration.
* Adds a new error if a custom command is defined more than once in one
block.
* Add some tests
* Hiding logic is simplified and fixed so you can hide and unhide the
same def repeatedly.
* Separates predeclared ids into its own data structure to protect them
from hiding. Otherwise, you could hide the predeclared variable and
the actual def would panic.
* compiles on nightly now. (breaking change)
* less deps
* Switch over to new resolver
(it's been stable for a while.)
* let's leave num-format for another PR
* Output error when ls into a file without permission
* math sqrt
* added test to check fails when ls into prohibited dir
* fix lint
* math sqrt with tests and doc
* trigger wasm build
* Update filesystem_shell.rs
* Fix Running echo .. starts printing integers forever
* Allow for multiple table scraping
* linting
* Fix clippy
* linting
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
Very often we need to work with tables (say extracted from unstructured data or some
kind of final report, timeseries, and the like).
It's inevitable we will be having columns that we can't know beforehand what their names
will be, or how many.
Also, we may end up with certain cells having values we may want to remove as we explore.
Here, `update cells` fundamentally goes over every cell in the table coming in and updates
the cell's contents with the output of the block passed. Basic example here:
```
> [
[ ty1, t2, ty];
[ 1, a, $nothing]
[(wrap), (0..<10), 1Mb]
[ 1s, ({}), 1000000]
[ $true, $false, ([[]])]
] | update cells { describe }
───┬───────────────────────┬───────────────────────────┬──────────
# │ ty1 │ t2 │ ty
───┼───────────────────────┼───────────────────────────┼──────────
0 │ integer │ string │ nothing
1 │ row Column(table of ) │ range[[integer, integer)] │ filesize
2 │ string │ nothing │ integer
3 │ boolean │ boolean │ table of
───┴───────────────────────┴───────────────────────────┴──────────
```
and another one (in the examples) for cases, say we have a timeseries table generated and
we want to remove the zeros and have empty strings and save it out to something like CSV.
```
> [
[2021-04-16, 2021-06-10, 2021-09-18, 2021-10-15, 2021-11-16, 2021-11-17, 2021-11-18];
[ 37, 0, 0, 0, 37, 0, 0]
] | update cells {|value| i
if ($value | into int) == 0 {
""
} {
$value
}
}
───┬────────────┬────────────┬────────────┬────────────┬────────────┬────────────┬────────────
# │ 2021-04-16 │ 2021-06-10 │ 2021-09-18 │ 2021-10-15 │ 2021-11-16 │ 2021-11-17 │ 2021-11-18
───┼────────────┼────────────┼────────────┼────────────┼────────────┼────────────┼────────────
0 │ 37 │ │ │ │ 37 │ │
───┴────────────┴────────────┴────────────┴────────────┴────────────┴────────────┴────────────
```
* Support completion when cursor inside an argument
Bash supports completion even when cursor is in an argument, this is very useful for some fixup after the initial completion.
Let add this feature as well.
Signed-off-by: Tw <wei.tan@intel.com>
* Add test for when cursor inside an argument
To support test this case, let's also take the position into account.
Signed-off-by: Tw <wei.tan@intel.com>
* Change path join signature
* Appending now works without flag
* Column path operation is behind a -c flag
* Move column path arg retrieval to a function
Also improves errors
* Fix path join tests
* Propagate column path changes to all path commands
* Update path command examples with columns paths
* Modernize path command examples by removing "echo"
* Improve structured path error message
* Fix typo
It is implemented as a preliminary check when parsing a call and relies
on a fact that a token that successfully parses as a range is unlikely
to be a valid path or command name.
* Expand path when converting value -> PathBuf
Also includes Tagged<PathBuf>.
Fixes#3605
* Expand path for PATH env. variable
Fixes#1834
* Remove leftover Cows after nu-path refactor
There were some unnecessary Cow conversions leftover from the old
nu-path implementation.
* Use canonicalize in source command; Improve errors
Previously, `source` used `expand_path()` which does not follow
symlinks.
As a follow up, I improved the source error messages so they now tell
why the source file could not be canonicalized or read into string.
This means that commands cannot start with these characters.
However, we get the following benefits:
* Negative numbers > -10
* Ranges with negative numbers > -10..-1
* Left-unbounded ranges > ..10
```
> [
[ msg, labels, span];
["The message", "Helpful message here", ([[start, end]; [0, 141]])]
] | error make
error: The message
┌─ shell:1:1
│
1 │ ╭ [
2 │ │ [ msg, labels, span];
3 │ │ ["The message", "Helpful message here", ([[start, end]; [0, 141]])]
│ ╰─────────────────────────────────────────────────────────────────────^ Helpful message here
```
Adding a more flexible approach for creating error values. One use case, for instance is the
idea of a test framework. A failed assertion instead of printing to the screen it could create
tables with more details of the failed assertion and pass it to this command for making a full
fledge error that Nu can show. This can (and should) be extended for capturing error values as well
in the pipeline. One could also use it for inspection.
For example: `.... | error inspect { # inspection here }`
or "error handling" as well, like so: `.... | error capture { fix here }`
However, we start here only with `error make` that creates an error value for you with limited support for the time being.
* Add subcommand `into filesize`
It's currently not possible to convert a number or a string containing a number
into a filesize. The only way to create an instance of filesize type today is
with a literal in nushell syntax. This commit adds the `into filesize`
subcommand so that file sizes can be created from the outputs of programs
producing numbers or strings, like standard unix tools.
There is a limitation with this - it doesn't currently parse values like `10 MB`
or `10 MiB`, it can only look at the number itself. If the desire is there, more
flexible parsing can be added.
* fixup! Add subcommand `into filesize`
* fixup! Add subcommand `into filesize`
* feat: spawn the executables directly if possible
This pull request changes nu-command so that it spawns the process directly if:
- They are a `.exe` on Windows
- They are not a `.sh` or `.bash` on not windows.
Benefits:
- As I explained in [this comment](https://github.com/nushell/nushell/issues/3898#issuecomment-894000812), this is another step towards making Nushell a standalone shell, that doesn't need to shell out unless it is running a script for a particular shell (cmd, sh, ps1, etc.).
- Fixes the bug with multiline strings
- Better performance due to direct spawning.
For example, this script shows ~20 ms less latency.
After:
```nu
C:\> benchmark { node -e 'console.log("sssss")' }
───┬──────────────────
# │ real time
───┼──────────────────
0 │ 63ms 921us 600ns
───┴──────────────────
```
Before
```nu
C:\> benchmark { node -e 'console.log("sssss")' }
───┬──────────────────
# │ real time
───┼──────────────────
0 │ 79ms 136us 800ns
───┴──────────────────
```
Fixes#3898
* fix: make which dependency optional
Also fixes clippy warnings
* refactor: refactor spawn_exe, spawn_cmd, spawn_sh, and spawn_any
* fix: use which feature instead of which-support
* fix: use which_in to use the cwd of nu
* fix: use case insensitive comparison of the extensions
Sometimes the case of the extension is uppercased by the "which_in" function
Also use unix instead of not windows. Some os might not have sh support
* Resolve rebase artifacts
* Remove leftover dependencies on removed feature
* Remove unnecessary 'pub'
* Start taking notes and fooling around
* Split canonicalize to two versions; Add TODOs
One that takes `relative_to` and one that doesn't.
More TODO notes.
* Merge absolutize to and rename resolve_dots
* Add custom absolutize fn and use it in path expand
* Convert a couple of dunce::canonicalize to ours
* Update nu-path description
* Replace all canonicalize with nu-path version
* Remove leftover dunce dependencies
* Fix broken autocd with trailing slash
Trailing slash is preserved *only* in paths that do not contain "." or
"..". This should be fixed in the future to cover all paths but for now
it at least covers basic cases.
* Use dunce::canonicalize for canonicalizing
* Alow cd recovery from non-existent cwd
* Disable removed canonicalize functionality tests
Remove unused import
* Break down nu-path into separate modules
* Remove unused public imports
* Remove abundant cow mapping
* Fix clippy warning
* Reformulate old canonicalize tests to expand_path
They wouldn't work with the new canonicalize.
* Canonicalize also ~ and ndots; Unify path joining
Also, add doc comments in nu_path::expansions.
* Add comment
* Avoid expanding ndots if path is not valid UTF-8
With this change, no lossy path->string conversion should happen in the
nu-path crate.
* Fmt
* Slight expand_tilde refactor; Add doc comments
* Start nu-path integration tests
* Add tests TODO
* Fix docstring typo
* Fix some doc strings
* Add README for nu-path crate
* Add a couple of canonicalize tests
* Add nu-path integration tests
* Add trim trailing slashes tests
* Update nu-path dependency
* Remove unused import
* Regenerate lockfile
* chore: Replace surf with reqwest
Removes a lot of older, duplication versions of some dependencies
(roughtly 90 dependencies removed in total)
* chore: Remove syn 0.11
* chore: Remove unnecessary features from ptree
Removes some more duplicate dependencies
* cargo update
* Ensure we run the fetch and post plugins on the tokio runtime
* Fix clippy warning
* fix: Github requires a user agent on requests
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Allow different names for ...rest
* Resolves#3945
* This change requires an explicit name for the rest argument in `WholeStreamCommand`,
which is why there are so many changed files.
* Remove redundant clone
* Add tests
* Allow environment variables to be hidden
This change allows environment variables in Nushell to have a value of
`Nothing`, which can be set by the user by passing `$nothing` to
`let-env` and friends.
Environment variables with a value of Nothing behave as if they are not
set at all. This allows a user to shadow the value of an environment
variable in a parent scope, effectively removing it from their current
scope. This was not possible before, because a scope can not affect its
parent scopes.
This is a workaround for issues like #3920.
Additionally, this allows a user to simultaneously set, change and
remove multiple environment variables via `load-env`. Any environment
variables set to $nothing will be hidden and thus act as if they are
removed. This simplifies working with virtual environments, which rely
on setting multiple environment variables, including PATH, to specific
values, and remove/change them on deactivation.
One surprising behavior is that an environment variable set to $nothing
will act as if it is not set when querying it (via $nu.env.X), but it is
still possible to remove it entirely via `unlet-env`. If the same
environment variable is present in the parent scope, the value in the
parent scope will be visible to the user. This might be surprising
behavior to users who are not familiar with the implementation details.
An additional corner case is the the shorthand form of `with-env` does
not work with this feature. Using `X=$nothing` will set $nu.env.X to the
string "$nothing". The long-form works as expected: `with-env [X
$nothing] {...}`.
* Remove unused import
* Allow all primitives to be convert to strings
Given we can write nu scripts. As the codebase grows, splitting into many smaller nu scripts is necessary.
In general, when we work with paths and files we seem to face quite a few difficulties. Here we just tackle one of them and it involves sourcing
files that also source other nu files and so forth. The current working directory becomes important here and being on a different directory
when sourcing scripts will not work. Mostly because we expand the path on the current working directory and parse the files when a source command
call is done.
For the moment, we introduce a `lib_dirs` configuration value and, unfortunately, introduce a new dependency in `nu-parser` (`nu-data`) to get
a handle of the configuration file to retrieve it. This should give clues and ideas as the new parser engine continues (introduce a way to also know paths)
With this PR we can do the following:
Let's assume we want to write a nu library called `my_library`. We will have the code in a directory called `project`: The file structure will looks like this:
```
project/my_library.nu
project/my_library/hello.nu
project/my_library/name.nu
```
This "pattern" works well, that is, when creating a library have a directory named `my_library` and next to it a `my_library.nu` file. Filling them like this:
```
source my_library/hello.nu
source my_library/name.nu
```
```
def hello [] {
"hello world"
}
```
```
def name [] {
"Nu"
end
```
Assuming this `project` directory is stored at `/path/to/lib/project`, we can do:
```
config set lib_dirs ['path/to/lib/project']
```
Given we have this `lib_dirs` configuration value, we can be anywhere while using Nu and do the following:
```
source my_library.nu
echo (hello) (name)
```
* Allow sourcing paths with emojis
* Add source command tests for emoji paths
* Fmt
* Disable source tests on Windows with illegal paths
* Test sourcing also ASCII and single-quoted paths
We introduce it here and allow it to work with regular lists (tables with no columns) as well as symmetric tables. Say we have two lists and wish to zip them, like so:
```
[0 2 4 6 8] | zip {
[1 3 5 7 9]
} | flatten
───┬───
0 │ 0
1 │ 1
2 │ 2
3 │ 3
4 │ 4
5 │ 5
6 │ 6
7 │ 7
8 │ 8
9 │ 9
───┴───
```
In the case for two tables instead:
```
[[symbol]; ['('] ['['] ['{']] | zip {
[[symbol]; [')'] [']'] ['}']]
} | each {
get symbol | $'($in.0)nushell($in.1)'
}
───┬───────────
0 │ (nushell)
1 │ [nushell]
2 │ {nushell}
───┴───────────
```
* Mitigate history file bug in Rustyline
Rustyline's duplicate ignoring code has a bug that can cause data loss and
history file corruption. Testing seems to indicate that disabling this behavior
and allowing duplicates will prevent the bug from showing up. Many people have
complained about this issue, I think it is worthwhile to fix the bug at the cost
of permitting duplicate history entries.
Upstream bug: https://github.com/kkawakam/rustyline/issues/559
* Increase Rustyline historyfile limit
Rustyline will only store 100 history items by default. This is quite a small
limit for a shell that people use as a daily driver. Especially when the
deduplication code is removed, we will hit that limit quickly and start to lose
history. This commit bumps the limit up to 10k. We can discuss if this is an
inappropriate limit or if we should allow users to specify this setting in their
nushell config file instead.
We very well support `nth 0 2 3 --skip 1 4` to select particular rows and skip some using a flag. However, in practice we deal with tables (whether they come from parsing or loading files and whatnot) where we don't know the size of the table up front (and everytime we have these, they may have different sizes). There are also other use cases when we use intermediate tables during processing and wish to always drop certain rows and **keep the rest**.
Usage:
```
... | drop nth 0
... | drop nth 3 8
```
The nu-serde crate allows us to become much more generic with respect to how we
convert output to `nu-protocol::Value`s. This allows us to remove a lot of the
special-case code that we wrote for deserializing JSON values.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Add the nu-serde crate
nu-serde is a crate that can be used to turn a value implementing
`serde::Serialize` into a `nu-protocol::Value`. This has the potential to
significantly simplify plugin authorship.
This crate was the previously independent
[serde-nu](https://github.com/lily-mara/serde-nu) but the nushell maintainers
expressed an interest in having it added to the mainline nushell repository.
* fixup! Add the nu-serde crate
Some environment variables, such as `RUST_LOG` include equals signs. Nushell
should support this in the shorthand environment variable syntax so that
developers using these variables can control them easily. We accomplish this by
swapping `std::str::split` for `std::str::splitn`, which ensures that we only
consider the first equals sign in the string instead of all of them, which we
did previously.
Closes#3867
* Adding parse fix for power operator error on negative integers and decimal
* Adding correct formatting
* Changed is negative check to follow conventions
* Adding tests
* Added fix for the negatives and added tests
* Removed comments
* nuframe in its own type in UntaggedValue
* Removed eager dataframe from enum
* Dataframe created from list of values
* Corrected order in dataframe columns
* Returned tag from stream collection
* Removed series from dataframe commands
* Arithmetic operators
* forced push
* forced push
* Replace all command
* String commands
* appending operations with dfs
* Testing suite for dataframes
* Unit test for dataframe commands
* improved equality for dataframes
* moving all dataframe operations to protocol
* objects in dataframes
* Removed cloning when converting to row
* Refactor Hash code to simplify md5 and sha256 implementations
Md5 and Sha256 (and other future digests) require less boilerplate code
now. Error reporting includues the name of the hash again.
* Add missing hash sha256 test
This brings the features used by the `nu_plugin_fetch` and
`nu_plugin_post` in line and drops the default-features, reducing
the number of pulled-in dependencies and avoiding a second round of
compilations.
Retry of #3777 but with different features, post and fetch plugin tested
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Select used to ignore absent values resulting in "squashing" where
columns for multiple rows could be squashed into a single row.
This fixes the problem by inserting null/nothing into absent value, thus
preserving the structure of rows. This makes sure that all selected
columns are present in each row.
* nuframe in its own type in UntaggedValue
* Removed eager dataframe from enum
* Dataframe created from list of values
* Corrected order in dataframe columns
* Returned tag from stream collection
* Removed series from dataframe commands
* Arithmetic operators
* forced push
* forced push
* Replace all command
* String commands
* appending operations with dfs
* Testing suite for dataframes
* Unit test for dataframe commands
* improved equality for dataframes
* moving all dataframe operations to protocol
Hashers now uses on Rust Crypto Digest trait which makes it trivial to
implement additional hash functions.
The original `md5` crate does not implement the Digest trait and was
replaced by `md-5` crate which does. Sha256 uses already included `sha2`
crate.
* nuframe in its own type in UntaggedValue
* Removed eager dataframe from enum
* Dataframe created from list of values
* Corrected order in dataframe columns
* Returned tag from stream collection
* Removed series from dataframe commands
* Arithmetic operators
* forced push
* forced push
* Replace all command
* String commands
* appending operations with dfs
* Testing suite for dataframes
* Unit test for dataframe commands
* improved equality for dataframes
* Read from standard input in `rm`
With this change, rm falls back to reading from the standard input if no
arguments are supplied. This leads to more intuitive pipes as seen in
https://github.com/nushell/nushell/issues/2824
ls | get name | sort-by | first 20 | each {rm $it} becomes
ls | get name | sort-by | first 20 | rm
* [Fix] Run cargo fmt, make files a rest parameter, and fix cargo build warnings
* [Fix] Fix clippy suggestions
* Fix swapped PATH env var separators
* Support pathvar to manipulate other vars than PATH
* Add tests for pathvar and its subcommands
* Adjust pathvar tests to comply with env quirks
* Make pathvar tests work on non-Windows as well
* Compact the comments in pathvar tests
* Fix last failing test
Co-authored-by: Jakub Žádník <jakub.zadnik@tuni.fi>
This allows converting strings to filepaths without having to use
`path expand` roundtrip.
Filepaths are taken as-is without any validation/conversion.
* Fix swapped PATH env var separators
* Support pathvar to manipulate other vars than PATH
* Add tests for pathvar and its subcommands
* Fix PATH env name for Windows
Seems like Windows uses PATH as well.
Co-authored-by: Jakub Žádník <jakub.zadnik@tuni.fi>
This brings the features used by the `nu_plugin_fetch` and
`nu_plugin_post` in line and drops the default-features, reducing
the number of pulled-in dependencies and avoiding a second round of
compilations.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
* kind of works but not what we really want
* updated `into binary` and `first` to work better together
* attempt to fix wasm build problem
* attempt #2 to fix wasm stuff
This brings with it a reduction in the number of duplicated
dependencies that it has and the overhead it imposes on our
build.
The number of crates that need to be built for
`cargo build --features extra` drops by roughly 50.
On Windows, we used the `is-exeuctable` crate but on Unix, we
duplicated the check that it did, with one difference: We also
looked at whether or not it was a symlink.
The `is-executable` crate uses `std::fs::metadata` which follows
symlinks, so this scenario should never occur here, as it will
return the metadata for the target file.
Using the `is-executable` crate on both Unix and Windows lets us
make it non-optional. This lets us remove the `executable-support`
feature. (It is worth noting that this code didn't compile on
Windows when the `executable-support` feature was not specified.)
Right now, there is an alternate code path for `target_arch` being
`wasm32`. This isn't exactly correct as it should probably handle
something different for when the `target_os` is `wasi`.
Nothing used the `ptree` feature or optional dependency within
`nu-command` except to include it within the `version` output. This
may be related to when `nu-cli` also had a `ptree` feature, but
I'm not sure.
That leaves the code within `nu_plugin_tree` as the sole remaining
user of `ptree`, which is already covered by the feature `tree`
and included in the `version` output.
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
* Correct float operations
* changes in series castings to allow other types
* Clippy error correction
* Removed lists from command signatures
* Added not command for series
* take command with args
* set with idx command
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
* Correct float operations
* changes in series castings to allow other types
* Clippy error correction
* Removed lists from command signatures
* Added not command for series
Seems we do `ctrl` feature checks in `nu-cli` and `nu-command`. We should find a better way to report the enabled features un the `version` command without using the conditionals (or somewhere else)
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
* Correct float operations
* changes in series castings to allow other types
* Clippy error correction
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
* Correct float operations
* Add paste command
* fix build and format failures
* Add examples
* Make tests pass
* Format
* add cfg annotation for Clip
* format code
* remove additional import for clip
* Remove test
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
In Nu we have variables (E.g. $var-name) and these contain `Value` types.
This means we can bind to variables any structured data and column path syntax
(E.g. `$variable.path.to`) allows flexibility for "querying" said structures.
Here we offer completions for these. For example, in a Nushell session the
variable `$nu` contains environment values among other things. If we wanted to
see in the screen some environment variable (say the var `SHELL`) we do:
```
> echo $nu.env.SHELL
```
with completions we can now do: `echo $nu.env.S[\TAB]` and we get suggestions
that start at the column path `$nu.env` with vars starting with the letter `S`
in this case `SHELL` appears in the suggestions.
* Output error when ls into a file without permission
* math sqrt
* added test to check fails when ls into prohibited dir
* fix lint
* math sqrt with tests and doc
* trigger wasm build
* Update filesystem_shell.rs
* Fix Running echo .. starts printing integers forever
* Fixed panic on operations with very large durations
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* plugin: basic from_mp4 implementation
This patch introduces a very basic implementation of from_mp4, with only
a few bits of meta-data available. The rest of the available meta-data
(which is more than half left), will be included in a later patch
* Mp4: Almost all track metadata is implemented
Only meta-data that is not implemented is duration, facing some weird
issue I am going to check on later
* Mp4: All meta-data fields implemented
All meta-data fields that can be retrieved are now retrieved, with the
exception of duration for both tracks and the entire file itself because
there is still an issue. However, that will be fixed in the upcoming
patches
* fix: UntaggedValue::duration() serializes correctly now
Previous to this patch, there was an issue where when you would use
UntaggedValue::duration() it would result in an invalid JSONRPC
resulting string when using the protocol. This patch fixes this issue
* Mp4: Duration fixed for file and tracks
* plugins: Add plugin extra to src/plugins
* Mp4: Replace unwrap() with expect()
* Fix: Remove test mp4 file
We've relied on `clap` for building our cli app bootstrapping that figures out the positionals, flags, and other convenient facilities. Nu has been capable of solving this problem for quite some time. Given this and much more reasons (including the build time caused by `clap`) we start here working with our own.
* enable theming of the command line syntax
* added missing flatshape, sorted flatshapes for easier reading.
* sorted flat shapes again and saved it this time
* added sample rwb.json syntax them file to docs
* Fix and clarify description of 'exec'
Most importantly, I added the information that it replaces the current
process.
* Convert exec to OutputStream; Remove unused trait
* Remove dead code & unused imports on non-unix
