Just a quick change: the test I made for `--no-newline` was missing
`--no-config-file`, so it could false-negative if you have problems with
your config.
# Description
Fixes a potential panic in `ls`.
# User-Facing Changes
Entries in the same directory are sorted first based on whether or not
they errored. Errors will be listed first, potentially stopping the
pipeline short.
# Description
Fix the docs repo CI build error here:
https://github.com/nushell/nushell.github.io/actions/runs/12425087184/job/34691291790#step:5:18
The doc generated by `make_docs.nu` for `polars profile` command will
make the CI build fail due to the indention error of markdown front
matters. I used to fix it manually before, for the long run, it's better
to fix it from the source code.
# Description
@maxim-uvarov found some bugs in the new `config flatten` command. This
PR should take care of what's been identified so far.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
I had issues with the following tests:
- `commands::network::http::delete::http_delete_timeout`
- `commands::network::http::get::http_get_timeout`
- `commands::network::http::options::http_options_timeout`
- `commands::network::http::patch::http_patch_timeout`
- `commands::network::http::post::http_post_timeout`
- `commands::network::http::put::http_put_timeout`
I checked what the actual issue was and my problem was that the tested
string `"did not properly respond after a period of time"` wasn't in the
actual error. This happened because my german Windows would return a
german error message which obviosly did not include that string. To fix
that I replaced the string check with the os error code that is also
part of the error message which should be language agnostic. (I hope.)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
\o/
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This file is not made accessible to the user through any of our `config`
commands.
Thus I discussed with Douglas to delete it, to ensure it doesn't go out
of date (the version added with #14601 was not yet part of the bumping
script)
All the necessary information on how to setup a `login.nu` file is
provided in the website documentation
Stumbled over unnecessary `pub` `fn action` and `struct Arguments` when
reworking `into bits` in #14634
Stuff like this should be local until proven otherwise and then named
approrpiately.
# Description
This PR continues to tweak `config flatten` by looking up the closures
and block_ids and extracts the content into the produced record.
Example
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
#14019 deprecated the `split-by` command. This sets its doc-category to
"deprecated" so that it will display that way in the in-shell and online
help
# User-Facing Changes
`split-by` will now show as a deprecated command in Help. Will also be
reported using:
```nushell
help commands | where category == deprecated
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Adds `$env.config.color_config.shape_garbage` to the default config so
that it is populated out of the box.
Thanks to @PerchunPak for finding that it was missing.
# User-Facing Changes
I think this is useful on two levels, but it will be a change for a lot
of users:
1. Accessing it won't generate an error out-of-the-box
2. Garbage errors are highlighted in reverse-red in real-time in the
REPL. This means that, for example, typing just a `$` will start out as
an error - Once a valid variable (e.g., `$env`) is completed, then the
highlight will change to the parsed shape.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
There is an opportunity to give a bogus block id to view source. This
makes it more resilient and not panic when an invalid block id is passed
in.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is supposed to be a Quality-of-Life command that just makes some
things easier when dealing with a nushell config. Really all it does is
show you the current config in a flattened state. That's it. I was
thinking this could be useful when comparing config settings between old
and new config files. There are still room for improvements. For
instance, closures are listed as an int. They can be updated with a
`view source <int>` pipeline but that could all be built in too.
The command works by getting the current configuration, serializing it
to json, then flattening that json. BTW, there's a new flatten_json.rs
in nu-utils. Theoretically all this mess could be done in a custom
command script, but it's proven to be exceedingly difficult based on the
work from discord.
Here's some more complex items to flatten.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is meant to add another nushell introspection/debug command,
`view blocks`. This command shows what is in the EngineState's memory
that is parsed and stored as blocks. Blocks may continue to grow as you
use the repl.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds the `merge deep` command. This allows you to merge nested
records and tables/lists within records together, instead of overwriting
them. The code for `merge` was reworked to support more general merging
of values, so `merge` and `merge deep` use the same underlying code.
`merge deep` mostly works like `merge`, except it recurses into inner
records which exist in both the input and argument rather than just
overwriting. For lists and by extension tables, `merge deep` has a
couple different strategies for merging inner lists, which can be
selected with the `--strategy` flag. These are:
- `table`: Merges tables element-wise, similarly to the merge command.
Non-table lists are not merged.
- `overwrite`: Lists and tables are overwritten with their corresponding
value from the argument, similarly to scalars.
- `append`: Lists and tables in the input are appended with the
corresponding list from the argument.
- `prepend`: Lists and tables in the input are prepended with the
corresponding list from the argument.
This can also be used with the new config changes to write a monolithic
record of _only_ the config values you want to change:
```nushell
# in config file:
const overrides = {
history: {
file_format: "sqlite",
isolation: true
}
}
# use append strategy for lists, e.g., menus keybindings
$env.config = $env.config | merge deep --strategy=append $overrides
# later, in REPL:
$env.config.history
# => ╭───────────────┬────────╮
# => │ max_size │ 100000 │
# => │ sync_on_enter │ true │
# => │ file_format │ sqlite │
# => │ isolation │ true │
# => ╰───────────────┴────────╯
```
<details>
<summary>Performance details</summary>
For those interested, there was less than one standard deviation of
difference in startup time when setting each config item individually
versus using <code>merge deep</code>, so you can use <code>merge
deep</code> in your config at no measurable performance cost. Here's my
results:
My normal config (in 0.101 style, with each `$env.config.[...]` value
updated individually)
```nushell
bench --pretty { ./nu -l -c '' }
# => 45ms 976µs 983ns +/- 455µs 955ns
```
Equivalent config with a single `overrides` record and `merge deep -s
append`:
```nushell
bench --pretty { ./nu -l -c '' }
# => 45ms 587µs 428ns +/- 702µs 944ns
```
</details>
Huge thanks to @Bahex for designing the strategies API and helping
finish up this PR while I was sick ❤️
Related: #12148
# User-Facing Changes
Adds the `merge deep` command to recursively merge records. For example:
```nushell
{a: {foo: 123 bar: "overwrite me"}, b: [1, 2, 3]} | merge deep {a: {bar: 456, baz: 789}, b: [4, 5, 6]}
# => ╭───┬───────────────╮
# => │ │ ╭─────┬─────╮ │
# => │ a │ │ foo │ 123 │ │
# => │ │ │ bar │ 456 │ │
# => │ │ │ baz │ 789 │ │
# => │ │ ╰─────┴─────╯ │
# => │ │ ╭───┬───╮ │
# => │ b │ │ 0 │ 4 │ │
# => │ │ │ 1 │ 5 │ │
# => │ │ │ 2 │ 6 │ │
# => │ │ ╰───┴───╯ │
# => ╰───┴───────────────╯
```
`merge deep` also has different strategies for merging inner lists and
tables. For example, you can use the `append` strategy to _merge_ the
inner `b` list instead of overwriting it.
```nushell
{a: {foo: 123 bar: "overwrite me"}, b: [1, 2, 3]} | merge deep --strategy=append {a: {bar: 456, baz: 789}, b: [4, 5, 6]}
# => ╭───┬───────────────╮
# => │ │ ╭─────┬─────╮ │
# => │ a │ │ foo │ 123 │ │
# => │ │ │ bar │ 456 │ │
# => │ │ │ baz │ 789 │ │
# => │ │ ╰─────┴─────╯ │
# => │ │ ╭───┬───╮ │
# => │ b │ │ 0 │ 1 │ │
# => │ │ │ 1 │ 2 │ │
# => │ │ │ 2 │ 3 │ │
# => │ │ │ 3 │ 4 │ │
# => │ │ │ 4 │ 5 │ │
# => │ │ │ 5 │ 6 │ │
# => │ │ ╰───┴───╯ │
# => ╰───┴───────────────╯
```
**Note to release notes writers**: Please credit @Bahex for this PR as
well 😄
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added tests for deep merge
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
---------
Co-authored-by: Bahex <bahey1999@gmail.com>
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.28.2 to
1.28.4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.28.4</h2>
<h2>[1.28.4] - 2024-12-16</h2>
<h3>Features</h3>
<ul>
<li><code>--format sarif</code> support</li>
</ul>
<h2>v1.28.3</h2>
<h2>[1.28.3] - 2024-12-12</h2>
<h3>Fixes</h3>
<ul>
<li>Correct <code>imlementations</code>, <code>includs</code>,
<code>qurorum</code>, <code>transatctions</code>,
<code>trasnactions</code>, <code>validasted</code>,
<code>vview</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.28.4] - 2024-12-16</h2>
<h3>Features</h3>
<ul>
<li><code>--format sarif</code> support</li>
</ul>
<h2>[1.28.3] - 2024-12-12</h2>
<h3>Fixes</h3>
<ul>
<li>Correct <code>imlementations</code>, <code>includs</code>,
<code>qurorum</code>, <code>transatctions</code>,
<code>trasnactions</code>, <code>validasted</code>,
<code>vview</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="9d89015957"><code>9d89015</code></a>
chore: Release</li>
<li><a
href="6b24563a99"><code>6b24563</code></a>
chore: Release</li>
<li><a
href="bd0a2769ae"><code>bd0a276</code></a>
docs: Update changelog</li>
<li><a
href="370109dd4d"><code>370109d</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1047">#1047</a>
from Zxilly/sarif</li>
<li><a
href="63908449a7"><code>6390844</code></a>
feat: Implement sarif format reporter</li>
<li><a
href="32b96444b9"><code>32b9644</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1169">#1169</a>
from klensy/deps</li>
<li><a
href="720258f60b"><code>720258f</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1176">#1176</a>
from Ghaniyyat05/master</li>
<li><a
href="a42904ad6e"><code>a42904a</code></a>
Update README.md</li>
<li><a
href="d1c850b2b5"><code>d1c850b</code></a>
chore: Release</li>
<li><a
href="a491fd56c0"><code>a491fd5</code></a>
chore: Release</li>
<li>Additional commits viewable in <a
href="https://github.com/crate-ci/typos/compare/v1.28.2...v1.28.4">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
With great thanks to @fdncred and especially @PerchunPak (see #14601)
for finding and fixing a number of issues that I pulled in here due to
the filename changes and upcoming freeze.
This PR primarily fixes a poor wording choice in the new filenames and
`config` command options. The fact that these were called
`sample_config.nu` (etc.) and accessed via `config --sample` created a
great deal of confusion. These were never intended to be used as-is as
config files, but rather as in-shell documentation.
As such, I've renamed them:
* `sample_config.nu` becomes `doc_config.nu`
* `sample_env.nu` becomes `doc_env.nu`
* `config nu --sample` becomes `config nu --doc`
* `config env --sample` because `config env --doc`
Also the following:
* Updates `doc_config.nu` with a few additional comment-fixes on top of
@PerchunPak's changes.
* Adds version numbers to all files - Will need to update the version
script to add some files after this PR.
* Additional doc on plugin and plugin_gc configuration which I had
failed to previously completely update from the older wording
* Updated the comments in the `scaffold_*.nu` files to point people to
`help config`/`help nu` so that, if things change in the future, it will
become more difficult for the comments to be outdated.
*
# User-Facing Changes
Mostly doc.
`config nu` and `config env` changes update new behavior previously
added in 0.100.1
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
* Update configuration chapter of doc
* Update the blog entry on migrating config
* Update `bump-version.nu`
# Description
This PR allows the `view source` command to view source based on an int
value. I wrote this specifically to be able to see closures where the
text is hidden. For example:
And then you can use those `<Closure #>` with the `view source` command
like this.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- fixes#14572
# Description
This allowed columns to be coalesced on full joins with `polars join`,
providing functionality simlar to the old `--outer` join behavior.
# User-Facing Changes
- Provides a new flag `--coalesce-columns` on the `polars join` command
# Description
Add tests for `path self`.
I wasn't very familiar with the code base, especially the testing
utilities, when I first implemented `path self`. It's been on my mind to
add tests for it since then.
# Description
Fixes#14600 by adding a default value for missing keys in
`default_config.nu`:
* `$env.config.color_config.glob`
* `$env.config.color_config.closure`
# User-Facing Changes
Will no longer error when accessing these keys.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
`from ...` conversions pass along all metadata except `content_type`,
which they set to `None`.
## Rationale
`open`ing a file results in no `content_type` metadata if it can be
parsed into a nu data structure, and using `open --raw` results in
`content_type` metadata.
`from ...` commands should preserve metadata ***except*** for
`content_type`, as after parsing it's no longer that `content_type` and
just structured nu data.
These commands should return identical data *and* identical metadata
```nushell
open foo.csv
```
```nushell
open foo.csv --raw | from csv
```
# User-Facing Changes
N/A
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
N/A
# Description
With `NU_LIB_DIRS`, `NU_PLUGIN_DIRS`, and `ENV_CONVERSIONS` now moved
out of `default_env.nu`, we're down to just a few left. This moves all
non-closure `PROMPT` variables out as well (and into Rust `main()`. It
also:
* Implements #14565 and sets the default
`TRANSIENT_PROMPT_COMMAND_RIGHT` and `TRANSIENT_MULTILINE_INDICATOR` to
an empty string so that they are removed for easier copying from the
terminal.
* Reverses portions of #14249 where I was overzealous in some of the
variables that were imported
* Fixes#12096
* Will be the final fix in place, I believe, to close#13670
# User-Facing Changes
Transient prompt will now remove the right-prompt and
multiline-indicator once a commandline has been entered.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
-
# After Submitting
Release notes addition
# Description
I noticed that `std/iter scan`'s closure has the order of parameters
reversed compared to `reduce`, so changed it to be consistent.
Also it didn't have `$acc` as `$in` like `reduce`, so fixed that as
well.
# User-Facing Changes
> [!WARNING]
> This is a breaking change for all operations where order of `$it` and
`$acc` matter.
- This is still fine.
```nushell
[1 2 3] | iter scan 0 {|x, y| $x + $y}
```
- This is broken
```nushell
[a b c d] | iter scan "" {|x, y| [$x, $y] | str join} -n
```
and should be changed to either one of these
- ```nushell
[a b c d] | iter scan "" {|it, acc| [$acc, $it] | str join} -n
```
- ```nushell
[a b c d] | iter scan "" {|it| append $it | str join} -n
```
# Tests + Formatting
Only change is in the std and its tests
- 🟢 toolkit test stdlib
# After Submitting
Mention in release notes
# Description
A lot of filter commands that have a closure argument (`each`, `filter`,
etc), have a wrong signature for the closure, indicating an extra int
argument for the closure.
I think they are a left over from before `enumerate` was added, used to
access iteration index. None of the commands changed in this PR actually
supply this int argument.
# User-Facing Changes
N/A
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
N/A
# Description
Add an example to `reduce` that shows accumulator can also be accessed
pipeline input.
# User-Facing Changes
N/A
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
N/A
Addresses some null handling issues in #6882
# Description
This changes the implementation of guessing a column type when a schema
is not specified.
New behavior:
1. Use the first non-Value::Nothing value type for the columns data type
2. If the value type changes (ignoring Value::Nothing) in subsequent
values, the datatype will be changed to DataType::Object("Value", None)
3. If a column type does not have a value type,
DataType::Object("Value", None) will be assumed.
Fixes#14542
# User-Facing Changes
Constant values are no longer missing from `scope variables` output
when the IR evaluator is enabled:
```diff
const foo = 1
scope variables | where name == "$foo" | get value.0 | to nuon
-null
+int
```
This PR should close
1. #10327
1. #13667
1. #13810
1. #14129
# Description
For `#` to start a comment, then it either need to be the first
character of the token or prefixed with ` ` (space).
So now you can do this:
```
~/Projects/nushell> 1..10 | each {echo test#testing } 12/05/2024 05:37:19 PM
╭───┬──────────────╮
│ 0 │ test#testing │
│ 1 │ test#testing │
│ 2 │ test#testing │
│ 3 │ test#testing │
│ 4 │ test#testing │
│ 5 │ test#testing │
│ 6 │ test#testing │
│ 7 │ test#testing │
│ 8 │ test#testing │
│ 9 │ test#testing │
╰───┴──────────────╯
```
# User-Facing Changes
It is a breaking change if anyone expected comments to start in the
middle of a string without any prefixing ` ` (space).
# Tests + Formatting
Did all:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
# After Submitting
I cant see that I need to update anything in [the
documentation](https://github.com/nushell/nushell.github.io) but please
point me in the direction if there is anything.
# Description
Closes#14521
This PR tweaks the way 64-bit hex numbers are parsed.
### Before
```nushell
❯ 0xffffffffffffffef
Error: nu:🐚:external_command
× External command failed
╭─[entry #1:1:1]
1 │ 0xffffffffffffffef
· ─────────┬────────
· ╰── Command `0xffffffffffffffef` not found
╰────
help: `0xffffffffffffffef` is neither a Nushell built-in or a known external command
```
### After
```nushell
❯ 0xffffffffffffffef
-17
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fixes#14554
# User-Facing Changes
Raw strings are now supported in match patterns:
```diff
match "foo" { r#'foo'# => true, _ => false }
-false
+true
```
#14556 Seems strange to me, because it downgrade `windows-target`
version.
So In this pr I tried to update it by hand, and also run `cargo update`
manually to see how it goes
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
fixes#14567
Now NuShell's `exec` command will decrement `SHLVL` env value before
passing it to target executable.
It only works in interactive session, the same as `SHLVL`
initialization.
In addition, this PR also make a simple change to `SHLVL` initialization
(only remove an unnecessary type conversion).
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Formatted.
With interactively tested with several shells (bash, zsh, fish) and
cross-exec-ing them, it works well this time.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
With Windows Path case-insensitivity in place, we no longer need an
`ENV_CONVERSIONS` for `PATH`, as the
`nu_engine::env::convert_env_values()` handles it automatically.
This PR:
* Removes the default `ENV_CONVERSIONS` for path from `default_env.nu`
* Sets `ENV_CONVERSIONS` to an empty record (so it can be `merge`'d) in
`main()` instead
# User-Facing Changes
No behavioral changes - Users will now have an empty `ENV_CONVERSIONS`
at startup by default, but the behavior should not change.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
# Description
Tidying up some of the wording of the sample and scaffold files to align
with our current recommendations:
* Continue to generate a commented-only `env.nu` and `config.nu` on
first launch.
* The generated `env.nu` mentions that most configuration can be done in
`config.nu`
* The `sample_env.nu` mentions the same. I might try getting rid of
`config env --sample` entirely (it's new since 0.100 anyway).
* All configuration is now documented "in-shell" in `sample_config.nu`,
which can be viewed using `config nu --sample` - This means that
environment variables that used to be in `sample_env.nu` have been moved
to `sample_config.new`.
# User-Facing Changes
Doc-only
# Tests + Formatting
Doc-only changes, but:
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Need to work on updates to Config chapter
# Description
Fix#14544 and is also the reciprocal of #14549.
Before: If both a const and env `NU_PLUGIN_DIRS` were defined at the
same time, the env paths would not be used.
After: The directories from `const NU_PLUGIN_DIRS` are searched for a
matching filename, and if not found, `$env.NU_PLUGIN_DIRS` directories
will be searched.
Before: `$env.NU_PLUGIN_DIRS` was unnecessary set both in main() and in
default_env.nu
After: `$env.NU_PLUGIN_DIRS` is only set in main()
Before: `$env.NU_PLUGIN_DIRS` was set to `plugins` in the config
directory
After: `$env.NU_PLUGIN_DIRS` is set to an empty list and `const
NU_PLUGIN_DIRS` is set to the directory above.
Also updates `sample_env.nu` to use the `const`
# User-Facing Changes
Most scenarios should work just fine as there continues to be an
`$env.NU_PLUGIN_DIRS` to append to or override.
However, there is a small chance of a breaking change if someone was
*querying* the old default `$env.NU_PLUGIN_DIRS`.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Also updated the `env` tests and added one for the `const`.
# After Submitting
Config doc updates
Bumps [scraper](https://github.com/causal-agent/scraper) from 0.21.0 to
0.22.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/causal-agent/scraper/releases">scraper's
releases</a>.</em></p>
<blockquote>
<h2>v0.22.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Make current nightly version of Clippy happy. by <a
href="https://github.com/adamreichold"><code>@adamreichold</code></a>
in <a
href="https://redirect.github.com/rust-scraper/scraper/pull/220">rust-scraper/scraper#220</a></li>
<li>RFC: Drop hash table for per-element attributes for more compact
sorted vector by <a
href="https://github.com/adamreichold"><code>@adamreichold</code></a>
in <a
href="https://redirect.github.com/rust-scraper/scraper/pull/221">rust-scraper/scraper#221</a></li>
<li>Bump ego-tree to version 0.10.0 by <a
href="https://github.com/cfvescovo"><code>@cfvescovo</code></a> in <a
href="https://redirect.github.com/rust-scraper/scraper/pull/222">rust-scraper/scraper#222</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/rust-scraper/scraper/compare/v0.21.0...v0.22.0">https://github.com/rust-scraper/scraper/compare/v0.21.0...v0.22.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="dcf5e0c781"><code>dcf5e0c</code></a>
Version 0.22.0</li>
<li><a
href="932ed03849"><code>932ed03</code></a>
Merge pull request <a
href="https://redirect.github.com/causal-agent/scraper/issues/222">#222</a>
from rust-scraper/bump-ego-tree</li>
<li><a
href="483ecab721"><code>483ecab</code></a>
Bump ego-tree to version 0.10.0</li>
<li><a
href="26f04ed47c"><code>26f04ed</code></a>
Merge pull request <a
href="https://redirect.github.com/causal-agent/scraper/issues/221">#221</a>
from rust-scraper/sorted-vec-instead-of-hash-table</li>
<li><a
href="ee66ee8d23"><code>ee66ee8</code></a>
Drop hash table for per-element attributes for more compact sorted
vector.</li>
<li><a
href="8d3e74bf36"><code>8d3e74b</code></a>
Merge pull request <a
href="https://redirect.github.com/causal-agent/scraper/issues/220">#220</a>
from rust-scraper/make-clippy-happy</li>
<li><a
href="47cc9de953"><code>47cc9de</code></a>
Make current nightly version of Clippy happy.</li>
<li>See full diff in <a
href="https://github.com/causal-agent/scraper/compare/v0.21.0...v0.22.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This PR should close
1. #10327
1. #13667
1. #13810
1. #14129
# Description
For `#` to start a comment, then it either need to be the first
character of the token or prefixed with ` ` (space).
So now you can do this:
```
~/Projects/nushell> 1..10 | each {echo test#testing } 12/05/2024 05:37:19 PM
╭───┬──────────────╮
│ 0 │ test#testing │
│ 1 │ test#testing │
│ 2 │ test#testing │
│ 3 │ test#testing │
│ 4 │ test#testing │
│ 5 │ test#testing │
│ 6 │ test#testing │
│ 7 │ test#testing │
│ 8 │ test#testing │
│ 9 │ test#testing │
╰───┴──────────────╯
```
# User-Facing Changes
It is a breaking change if anyone expected comments to start in the
middle of a string without any prefixing ` ` (space).
# Tests + Formatting
Did all:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
# After Submitting
I cant see that I need to update anything in [the
documentation](https://github.com/nushell/nushell.github.io) but please
point me in the direction if there is anything.
---------
Co-authored-by: Wind <WindSoilder@outlook.com>
# Description
Closes: #14387
~To make it happen, just need to added `-l` flag to `du`, and pass it to
`DirBuilder`, `DirInfo`, `FileInfo`
Then tweak `impl From<DirInfo> for Value` and `impl From<FileInfo> for
Value` impl.~
---
Edit: this PR is going to:
1. Exclude directories and files columns by default
2. Added `-l/--long` flag to output directories and files columns
3. When running `du`, it will output the files as well. Previously it
doesn't output the size of file.
To make it happen, just need to added `-r` flag to `du`, and pass it to
`DirBuilder`, `DirInfo`, `FileInfo`
Then tweak `impl From<DirInfo> for Value` and `impl From<FileInfo> for
Value` impl.
And rename some variables.
# User-Facing Changes
`du` is no longer output `directories` and `file` columns by default,
added `-r` flag will show `directories` column, `-f` flag will show
`files` column.
```nushell
> du nushell
╭───┬────────────────────────────────────┬──────────┬──────────╮
│ # │ path │ apparent │ physical │
├───┼────────────────────────────────────┼──────────┼──────────┤
│ 0 │ /home/windsoilder/projects/nushell │ 34.6 GiB │ 34.7 GiB │
├───┼────────────────────────────────────┼──────────┼──────────┤
│ # │ path │ apparent │ physical │
╰───┴────────────────────────────────────┴──────────┴──────────╯
> du nushell --recursive --files # It outputs two more columns, `directories` and `files`, but the output is too long to paste here.
```
# Tests + Formatting
Added 1 test
# After Submitting
NaN
# Description
Before this PR, `help commands` uses the name from a command's
declaration rather than the name in the scope. This is problematic when
trying to view the help page for the `main` command of a module. For
example, `std bench`:
```nushell
use std/bench
help bench
# => Error: nu::parser::not_found
# =>
# => × Not found.
# => ╭─[entry #10:1:6]
# => 1 │ help bench
# => · ──┬──
# => · ╰── did not find anything under this name
# => ╰────
```
This can also cause confusion when importing specific commands from
modules. Furthermore, if there are multiple commands with the same name
from different modules, the help text for _both_ will appear when
querying their help text (this is especially problematic for `main`
commands, see #14033):
```nushell
use std/iter
help iter find
# => Error: nu::parser::not_found
# =>
# => × Not found.
# => ╭─[entry #3:1:6]
# => 1│ help iter find
# => · ────┬────
# => · ╰── did not find anything under this name
# => ╰────
help find
# => Searches terms in the input.
# =>
# => Search terms: filter, regex, search, condition
# =>
# => Usage:
# => > find {flags} ...(rest)
# [...]
# => Returns the first element of the list that matches the
# => closure predicate, `null` otherwise
# [...]
# (full text omitted for brevity)
```
This PR changes `help commands` to use the name as it is in scope, so
prefixing any command in scope with `help` will show the correct help
text.
```nushell
use std/bench
help bench
# [help text for std bench]
use std/iter
help iter find
# [help text for std iter find]
use std
help std bench
# [help text for std bench]
help std iter find
# [help text for std iter find]
```
Additionally, the IR code generation for commands called with the
`--help` text has been updated to reflect this change.
This does have one side effect: when a module has a `main` command
defined, running `help <name>` (which checks `help aliases`, then `help
commands`, then `help modules`) will show the help text for the `main`
command rather than the module. The help text for the module is still
accessible with `help modules <name>`.
Fixes#10499, #10311, #11609, #13470, #14033, and #14402.
Partially fixes#10707.
Does **not** fix#11447.
# User-Facing Changes
* Help text for commands can be obtained by running `help <command
name>`, where the command name is the same thing you would type in order
to execute the command. Previously, it was the name of the function as
written in the source file.
* For example, for the following module `spam` with command `meow`:
```nushell
module spam {
# help text
export def meow [] {}
}
```
* Before this PR:
* Regardless of how `meow` is `use`d, the help text is viewable by
running `help meow`.
* After this PR:
* When imported with `use spam`: The `meow` command is executed by
running `spam meow` and the `help` text is viewable by running `help
spam meow`.
* When imported with `use spam foo`: The `meow` command is executed by
running `meow` and the `help` text is viewable by running `meow`.
* When a module has a `main` command defined, `help <module name>` will
return help for the main command, rather than the module. To access the
help for the module, use `help modules <module name>`.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fixes#14401 where expressions passed to `timeit` will execute twice.
This PR removes the expression support for `timeit`, as this behavior is
almost exclusive to `timeit` and can hinder migration to the IR
evaluator in the future. Additionally, `timeit` used to be able to take
a `block` as an argument. Blocks should probably only be allowed for
parser keywords, so this PR changes `timeit` to instead only take
closures as an argument. This also fixes an issue where environment
updates inside the `timeit` block would affect the parent scope and all
commands later in the pipeline.
```nu
> timeit { $env.FOO = 'bar' }; print $env.FOO
bar
```
# User-Facing Changes
`timeit` now only takes a closure as the first argument.
# After Submitting
Update examples in the book/docs if necessary.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Noticed this TODO, so I did as it said.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A (the functionality was already removed)
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
N/A
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
A slower, gentler alternative to #14531, in that we're just moving one
setting *out* of `default_env.nu` in this PR ;-).
All this does is transition from using `$env.NU_LIB_DIRS` in the startup
config to `const $NU_LIB_DIRS`. Also updates the `sample_env.nu` to
reflect the changes.
Details:
Before: `$env.NU_LIB_DIRS` was unnecessary set both in `main()` and in
`default_env.nu`
After: `$env.NU_LIB_DIRS` is only set in `main()`
Before: `$env.NU_LIB_DIRS` was set to `config-dir/scripts` and
`data-dir/completions`
After: `$env.NU_LIB_DIRS` is set to an empty list, and `const
NU_LIB_DIRS` is set to the directories above
Before: Using `--include-path (-I)` would set the `$env.NU_LIB_DIRS`
After: Using `--include-path (-I)` sets the constant `$NU_LIB_DIRS`
# User-Facing Changes
There shouldn't be any breaking changes here. The `$env.NU_LIBS_DIRS`
still works for most cases. There are a few areas we need to clean-up to
make sure that the const is usable (`nu-check`, et. al.) but they will
still work in the meantime with the older `$env` version.
# Tests + Formatting
* Changed the Type-check on the `$env` version.
* Added a type check for the const version.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Doc updates
# Description
#14249 loaded `convert_env_values()` several times to force more updates
to `ENV_CONVERSION`. This allows the user to treat variables as
structured data inside `config.nu` (and others).
Unfortunately, `convert_env_values()` did not originally anticipate
being called more than once, so it would attempt to re-convert values
that had already been converted. This usually leads to an error in the
conversion closure.
With this PR, values are only converted with `from_string` if they are
still strings; otherwise they are skipped and their existing value is
used.
# User-Facing Changes
No user-facing change when compared to 0.100, since closures written for
0.100's `ENV_CONVERSION` now work again without errors.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
-
# After Submitting
Will remove the "workaround" from the Config doc preview.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
In this PR I made the `cwd` parameter in the functions from the `table`
command not used when targeting `not(feature = "os)`. As without an OS
and therefore without filesystem we don't have any real concept of a
current working directory. This allows using the `table` command in the
WASM context.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
My tests timed out on the http stuff but I cannot think why this would
trigger a test failure. Let's see what the CI finds out.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates nushell to the latest commit of reedline that fixes some
rendering issues on window resize.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- This PR should fix/close:
- #11266
- #12893
- #13736
- #13748
- #14170
- It doesn't fix#13736 though unfortunately. The issue there is at a
different level to this fix (I think probably in the lexing somewhere,
which I haven't touched).
# The Problem
The linked issues have many examples of the problem and the related
confusion it causes, but I'll give some more examples here for
illustration. It boils down to the following:
This doesn't type check (good):
```nu
def foo []: string -> int { false }
```
This does (bad):
```nu
def foo [] : string -> int { false }
```
Because the parser is completely ignoring all the characters. This also
compiles in 0.100.0:
```nu
def blue [] Da ba Dee da Ba da { false }
```
And this also means commands which have a completely fine type, but an
extra space before `:`, lose that type information and end up as `any ->
any`, e.g.
```nu
def foo [] : int -> int {$in + 3}
```
```bash
$ foo --help
Input/output types:
╭───┬───────┬────────╮
│ # │ input │ output │
├───┼───────┼────────┤
│ 0 │ any │ any │
╰───┴───────┴────────╯
```
# The Fix
Special thank you to @texastoland whose draft PR (#12358) I referenced
heavily while making this fix.
That PR seeks to fix the invalid parsing by disallowing whitespace
between `[]` and `:` in declarations, e.g. `def foo [] : int -> any {}`
This PR instead allows the whitespace while properly parsing the type
signature. I think this is the better choice for a few reasons:
- The parsing is still straightforward and the information is all there
anyway,
- It's more consistent with type annotations in other places, e.g. `do
{|nums : list<int>| $nums | describe} [ 1 2 3 ]` from the [Type
Signatures doc
page](https://www.nushell.sh/lang-guide/chapters/types/type_signatures.html)
- It's more consistent with the new nu parser, which allows `let x :
bool = false` (current nu doesn't, but this PR doesn't change that)
- It will be less disruptive and should only break code where the types
are actually wrong (if your types were correct, but you had a space
before the `:`, those declarations will still compile and now have more
type information vs. throwing an error in all cases and requiring spaces
to be deleted)
- It's the more intuitive syntax for most functional programmers like
myself (haskell/lean/coq/agda and many more either allow or require
whitespace for type annotations)
I don't use Rust a lot, so I tried to keep most things the same and the
rest I wrote as if it was Haskell (if you squint a bit). Code
review/suggestions very welcome. I added all the tests I could think of
and `toolkit check pr` gives it the all-clear.
# User-Facing Changes
This PR meets part of the goal of #13849, but doesn't do anything about
parsing signatures twice and doesn't do much to improve error messages,
it just enforces the existing errors and error messages.
This will no doubt be a breaking change, mostly because the code is
already broken and users don't realise yet (one of my personal scripts
stopped compiling after this fix because I thought `def foo [] -> string
{}` was valid syntax). It shouldn't break any type-correct code though.
# Description
fixes
[this](https://github.com/nushell/nushell/pull/14303#issuecomment-2525100480)
where lsp and ide integration would produce the following error
---
```sh
nu --ide-check 100 "/path/to/env.nu"
```
with
```nu
const const_env = path self
```
would lead to
```
Error: nu:🐚:file_not_found
× File not found
╭─[/path/to/env.nu:1:19]
1 │ const const_env = path self
· ────┬────
· ╰── Couldn't find current file
╰────
```
# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
In this PR I exposed the struct `ToHtml` that comes from `nu-cmd-extra`.
I know this command isn't in a best state and should be changed in some
way in the future but having the struct exposed makes transforming data
to html way more simple for external tools as the `PipelineData` can
easily be placed in the `ToHtml::run` method.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I did `fmt` and `check` but not `test`, shouldn't break any tests
regardless.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
For the demo page or my jupyter kernel would this make my life easiert.
Alternative solution to:
- #12195
The other approach:
- #14305
# Description
Adds ~`path const`~ `path self`, a parse-time only command for getting
the absolute path of the source file containing it, or any file relative
to the source file.
- Useful for any script or module that makes use of non nuscript files.
- Removes the need for `$env.CURRENT_FILE` and `$env.FILE_PWD`.
- Can be used in modules, sourced files or scripts.
# Examples
```nushell
# ~/.config/nushell/scripts/foo.nu
const paths = {
self: (path self),
dir: (path self .),
sibling: (path self sibling),
parent_dir: (path self ..),
cousin: (path self ../cousin),
}
export def main [] {
$paths
}
```
```nushell
> use foo.nu
> foo
╭────────────┬────────────────────────────────────────────╮
│ self │ /home/user/.config/nushell/scripts/foo.nu │
│ dir │ /home/user/.config/nushell/scripts │
│ sibling │ /home/user/.config/nushell/scripts/sibling │
│ parent_dir │ /home/user/.config/nushell │
│ cousin │ /home/user/.config/nushell/cousin │
╰────────────┴────────────────────────────────────────────╯
```
Trying to run in a non-const context
```nushell
> path self
Error: × this command can only run during parse-time
╭─[entry #1:1:1]
1 │ path self
· ─────┬────
· ╰── can't run after parse-time
╰────
help: try assigning this command's output to a const variable
```
Trying to run in the REPL i.e. not in a file
```nushell
> const foo = path self
Error: × Error: nu:🐚:file_not_found
│
│ × File not found
│ ╭─[entry #3:1:13]
│ 1 │ const foo = path self
│ · ─────┬────
│ · ╰── Couldn't find current file
│ ╰────
│
╭─[entry #3:1:13]
1 │ const foo = path self
· ─────┬────
· ╰── Encountered error during parse-time evaluation
╰────
```
# Comparison with #14305
## Pros
- Self contained implementation, does not require changes in the parser.
- More concise usage, especially with parent directories.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
- fixes flakey tests from solving #14241
# Description
This is a preliminary fix for the flaky tests and also
shortened the `--max-time` in the tests.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
---------
Signed-off-by: Alex Kattathra Johnson <alex.kattathra.johnson@gmail.com>
The `--name` flag of `polars with-column` only works when used with an
eager dataframe. I will not work with lazy dataframes and it will not
work when used with expressions (which forces a conversion to a
lazyframe). This pull request adds better documentation to the flags and
errors messages when used in cases where it will not work.
# Description
This PR adds a `file` column to the `scope modules` output table.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- should close https://github.com/nushell/nushell/issues/14517
# Description
this will change `to ndnuon` so that newlines are encoded as a literal
`\n` which `from ndnuon` is already able to handle
# User-Facing Changes
users should be able to encode multiline strings in NDNUON
# Tests + Formatting
new tests have been added:
- they don't pass on the first commit
- they do pass with the fix
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Fixes#14515
Also tweaks the fix from #11261 _just in case_ someone has a `foo`
executable
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds a new function that allows one to get an env var
case-insensitively. I did this so we can hopefully stop having problems
when Windows has HKLM as path and HKCU as Path.
Instead of just changing every function that used the original one, I
chose the ones that I thought were specific to getting the path. I
didn't want to go all in and make every env get case insensitive, but
maybe we should? 🤷🏻♂️closes#12676
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
closes https://github.com/nushell/nushell/issues/14487
This PR tries to allow the `select` to stream better by changing the for
loops that collected the output into a `Vec<Value>` prior to returning
it into a map that returns the data as it is processed.
One curiosity, `select` transforms the input into a `PipelineIterator`.
If I remove this code, it still passes all tests. I'm not sure all this
`PipelineIterator` code is even needed. I left it for someone to tell me
if it's necessary.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- this PR should close#14238
# Description
Solved as described here (First suggestion):
https://github.com/nushell/nushell/issues/14238#issuecomment-2506387012
Below I make the example from the issue, it shows that the completion
now works past the first parameter.
```
~/Projects/nushell> def list [...args] { 11/30/2024 03:21:24 PM
::: $args
::: | each {
::: open $args
::: }
::: }
~/Projects/nushell> cd tests/fixtures/completions/ 11/30/2024 03:25:24 PM
~/Projects/nushell/tests/fixtures/completions| list custom_completion.nu 11/30/2024 03:25:35 PM
another/ custom_completion.nu directory_completion/ nushell
test_a/ test_b/ .hidden_file .hidden_folder/
```
# User-Facing Changes
The changes introduced to completions in
`baadaee0163a5066ae73509ff6052962b3422673` now does not return if it did
not find "Operator completions".
This could have impact on more than just custom commands, but it could
be seemed as making everything a bit more robust.
# Tests + Formatting
I ran all of:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
# After Submitting
I do not think there is any need to update [the
documentation](https://github.com/nushell/nushell.github.io), right?
---------
Co-authored-by: Daniel Winther Petersen <daniel.winther.petersen@subaio.com>
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.6.0 to
2.7.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's
changelog</a>.</em></p>
<blockquote>
<h2>2.7.0 (2024-11-30)</h2>
<ul>
<li>Added methods <code>Entry::insert_entry</code> and
<code>VacantEntry::insert_entry</code>, returning
an <code>OccupiedEntry</code> after insertion.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="539b401151"><code>539b401</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/361">#361</a>
from cuviper/insert_entry</li>
<li><a
href="998edb12fe"><code>998edb1</code></a>
Release 2.7.0</li>
<li><a
href="2a0ca97417"><code>2a0ca97</code></a>
Add <code>{Entry,VacantEntry}::insert_entry</code></li>
<li><a
href="dceb0f0598"><code>dceb0f0</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/360">#360</a>
from cuviper/collect_vec_list</li>
<li><a
href="c095322249"><code>c095322</code></a>
ci: downgrade hashbrown for 1.63</li>
<li><a
href="7d8cef8b4b"><code>7d8cef8</code></a>
Use rayon-1.9.0's <code>collect_vec_list</code></li>
<li>See full diff in <a
href="https://github.com/indexmap-rs/indexmap/compare/2.6.0...2.7.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
v3 drops the dependency on joinery, as well as on lazy_static. The MSRV
is bumped to 1.70.0 but that is still way below what nushell requires.
# User-Facing Changes
N/A
# Tests + Formatting
All tests pass (including nu-command which is the direct user)
# After Submitting
N/A
Signed-off-by: Michel Lind <salimma@fedoraproject.org>
Bumps [multipart-rs](https://github.com/feliwir/multipart-rs) from
0.1.11 to 0.1.13.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/feliwir/multipart-rs/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [ureq](https://github.com/algesten/ureq) from 2.10.1 to 2.12.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/algesten/ureq/blob/main/CHANGELOG.md">ureq's
changelog</a>.</em></p>
<blockquote>
<h1>2.12.0</h1>
<ul>
<li>Bump MSRV 1.67 -> 1.71 because rustls will soon adopt it (<a
href="https://redirect.github.com/algesten/ureq/issues/905">#905</a>)</li>
<li>Unpin rustls dep (>=0.23.19) (<a
href="https://redirect.github.com/algesten/ureq/issues/905">#905</a>)</li>
</ul>
<h1>2.11.0</h1>
<ul>
<li>Fixes for changes to cargo-deny (<a
href="https://redirect.github.com/algesten/ureq/issues/882">#882</a>)</li>
<li>Pin rustls dep on 0.23.19 to keep MSRV 1.67 (<a
href="https://redirect.github.com/algesten/ureq/issues/878">#878</a>)</li>
<li>Bump MSRV 1.63 -> 1.67 due to time crate (<a
href="https://redirect.github.com/algesten/ureq/issues/878">#878</a>)</li>
<li>Re-export rustls (<a
href="https://redirect.github.com/algesten/ureq/issues/813">#813</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="3d6048e5b0"><code>3d6048e</code></a>
2.12.0</li>
<li><a
href="3e09aea948"><code>3e09aea</code></a>
Fix http crate confusion</li>
<li><a
href="cd6a0849bb"><code>cd6a084</code></a>
Github CI only run 1.71</li>
<li><a
href="dfab2607d6"><code>dfab260</code></a>
Update readme</li>
<li><a
href="af2143be89"><code>af2143b</code></a>
Update changelog</li>
<li><a
href="feea74b343"><code>feea74b</code></a>
Unpin rustls and bump MSRV to 1.71</li>
<li><a
href="937b1da311"><code>937b1da</code></a>
Update changelog</li>
<li><a
href="a44804833c"><code>a448048</code></a>
Note in readme about MSRV</li>
<li><a
href="24686d0829"><code>24686d0</code></a>
2.11.0</li>
<li><a
href="10869e22c0"><code>10869e2</code></a>
Fix incorrect feature flags</li>
<li>Additional commits viewable in <a
href="https://github.com/algesten/ureq/compare/2.10.1...2.12.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [bytes](https://github.com/tokio-rs/bytes) from 1.8.0 to 1.9.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/tokio-rs/bytes/releases">bytes's
releases</a>.</em></p>
<blockquote>
<h2>Bytes v1.9.0</h2>
<h1>1.9.0 (November 27, 2024)</h1>
<h3>Added</h3>
<ul>
<li>Add <code>Bytes::from_owner</code> to enable externally-allocated
memory (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/742">#742</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>Fix typo in Buf::chunk() comment (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/744">#744</a>)</li>
</ul>
<h3>Internal changes</h3>
<ul>
<li>Replace BufMut::put with BufMut::put_slice in Writer impl (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/745">#745</a>)</li>
<li>Rename hex_impl! to fmt_impl! and reuse it for fmt::Debug (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/743">#743</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/tokio-rs/bytes/blob/master/CHANGELOG.md">bytes's
changelog</a>.</em></p>
<blockquote>
<h1>1.9.0 (November 27, 2024)</h1>
<h3>Added</h3>
<ul>
<li>Add <code>Bytes::from_owner</code> to enable externally-allocated
memory (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/742">#742</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>Fix typo in Buf::chunk() comment (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/744">#744</a>)</li>
</ul>
<h3>Internal changes</h3>
<ul>
<li>Replace BufMut::put with BufMut::put_slice in Writer impl (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/745">#745</a>)</li>
<li>Rename hex_impl! to fmt_impl! and reuse it for fmt::Debug (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/743">#743</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d0a14deeb5"><code>d0a14de</code></a>
chore: prepare bytes v1.9.0 (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/748">#748</a>)</li>
<li><a
href="54f1c26f69"><code>54f1c26</code></a>
Rename hex_impl! to fmt_impl! and reuse it for fmt::Debug (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/743">#743</a>)</li>
<li><a
href="4cd8969e85"><code>4cd8969</code></a>
Replace <code>BufMut::put</code> with <code>BufMut::put_slice</code> in
Writer impl (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/745">#745</a>)</li>
<li><a
href="2d996a2b41"><code>2d996a2</code></a>
Fix typo in <code>Buf::chunk()</code> comment (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/744">#744</a>)</li>
<li><a
href="30ee8e9cba"><code>30ee8e9</code></a>
Add <code>Bytes::from_owner</code> (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/742">#742</a>)</li>
<li>See full diff in <a
href="https://github.com/tokio-rs/bytes/compare/v1.8.0...v1.9.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.28.1 to
1.28.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.28.2</h2>
<h2>[1.28.2] - 2024-12-02</h2>
<h3>Fixes</h3>
<ul>
<li>Don't correct <code>parametrize</code> variants</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.28.2] - 2024-12-02</h2>
<h3>Fixes</h3>
<ul>
<li>Don't correct <code>parametrize</code> variants</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="2872c382bb"><code>2872c38</code></a>
chore: Release</li>
<li><a
href="6af7c259ed"><code>6af7c25</code></a>
docs: Update changelog</li>
<li><a
href="2d9a242c9f"><code>2d9a242</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1165">#1165</a>
from epage/fix</li>
<li><a
href="97bbab80c8"><code>97bbab8</code></a>
fix(dict): Don't correct parametrized</li>
<li><a
href="679c99cf66"><code>679c99c</code></a>
test(dict): Consistenty filter out unverified entries</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.28.1...v1.28.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Makes the `glob` command stream
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
The glob command now streams
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
# Description
Better discoverability of `drop` subcommands
"I want to remove items by index" -> `drop nth`
h/t @amtoine
# User-Facing Changes
More search terms
This PR implements PWD-per-drive as described in discussion #14355
# Description
On Windows, CMD or PowerShell assigns each drive its own current
directory. For example, if you are in 'C:\Windows', switch to 'D:', and
navigate to 'D:\Game', you can return to 'C:\Windows' by simply typing
'C:'.
This PR enables Nushell on Windows to have the same capability, allowing
each drive to maintain its own PWD (Present Working Directory).
# User-Facing Changes
Currently, 'cd' or 'ls' only accept absolute paths if the path starts
with 'C:' or another drive letter. With PWD-per-drive, users can use
'cd' (or auto cd) and 'ls' in the same way as 'cd' and 'dir' in
PowerShell, or similarly to 'cd' and 'dir' in CMD (noting that cd in CMD
has slightly different behavior, 'cd' for another drive only changes
current directory of that drive, but does not switch there).
Interaction example on switching between drives:
```Nushell
~>D:
D:\>cd Test
D:\Test\>C:
~>D:
D:\Test\>C:
~>cd D:..
D:\>C:x/../y/../z/..
~>cd D:Test\Test
D:\Test\Test>C:
~>D:...
D:\>
```
Interaction example on auto-completion at cmd line:
```Nushell
~>cd D:\test[Enter]
D:\test>~[Enter]
~>D:[TAB]
~>D:\test[Enter]
D:\test>c:.c[TAB]
c:\users\nushell\.cargo\ c:\users\nushell\.config\
```
Interaction example on pass PWD-per-drive to child process: (Note CMD
will use it, but PowerShell will ignore it though it still prepares such
info for child process)
```Nushell
~>cd D:\Test
D:\Test>cd E:\Test
E:\Test\>~
~>CMD
Microsoft Windows [Version 10.0.22631.4460]
(c) Microsoft Corporation. All rights reserved.
C:\Users\Nushell>d:
D:\Test>e:
E:\Test>
```
# Brief Change Description
1.Added 'crates/nu-path/src/pwd_per_drive.rs' to implement a 26-slot
array mapping drive letters to PWDs. Test cases are included in the same
file, along with a doctest for the usage of PWD-per-drive.
2. Modified 'crates/nu-path/src/lib.rs' to declare module of
pwd_per_drive and export struct for PWD-per-drive.
3. Modified 'crates/nu-protocol/src/engine/stack.rs' to sync PWD when
set_cwd() is called. Add PWD-per-drive map as member. Clone between
parent and child. Stub/proxy for nu_path::expand_path_with() to
facilitate filesystem commands using PWD-per-drive.
4. Modified 'crates/nu-cli/src/repl.rs' auto_cd uses PWD-per-drive to
expand path.
5. Modified 'crates/nu-cli/src/completions/completion_common.rs' to
expand relative path when press [TAB] at command line.
6. Modified 'crates/nu-engine/src/env.rs' to collect PWD-per-drive info
as env vars for child process as CMD or PowerShell do, this can let
child process inherit PWD-per-drive info.
7. Modified 'crates/nu-engine/src/eval.rs', caller clone callee's
PWD-per-drive info, supporting 'def --env'
8. Modified 'crates/nu-engine/src/eval_ir.rs', 'def --env' support.
Remove duplicated fn redirect_env()
9. Modified 'src/run.rs', to init PWD-per-drive when startup.
filesystem commands that modified:
1. Modified 'crates/nu-command/src/filesystem/cd.rs', 1 line change to
use stackscoped PWD-per-drive.
Other commands, commit pending....
Local test def --env OK:
```nushell
E:\study\nushell> def --env env_cd_demo [] {
::: cd ~
::: cd D:\Project
::: cd E:Crates
::: }
E:\study\nushell>
E:\study\nushell> def cd_no_demo [] {
::: cd ~
::: cd D:\Project
::: cd E:Crates
::: }
E:\study\nushell> cd_no_demo
E:\study\nushell> C:
C:\>D:
D:\>E:
E:\study\nushell>env_cd_demo
E:\study\nushell\crates> C:
~>D:
D:\Project>E:
E:\study\nushell\crates>
```
# Tests + Formatting
- `cargo fmt --all -- --check` passed.
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
passed.
- `cargo test --workspace` passed on Windows developer mode and Ubuntu.
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` passed.
- nushell:
```
> use toolkit.nu # or use an `env_change` hook to activate it automatically
> toolkit check pr
> ```
passed
---------
Co-authored-by: pegasus.cadence@gmail.com <pegasus.cadence@gmail.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
In #14418 I added the `plugin` feature to the crate `nu-cmd-lang`. I
forgot to include that feature in the `nushell/plugin` feature. This
caused the `version` command to not have the `installed_plugins` field.
With this PR I fixed that.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None 😇
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Running `version` shows `installed_plugins` again.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
That should be it.
# Description
I always wondered why the module env vars `CURRENT_FILE`, `FILE_PWD`,
`PROCESS_PATH` weren't available in the source command. I tried to add
them here. I think it could be helpful but I'm not sure. I'm also not
sure this hack is what we should do but I thought I'd put it out there
for fun.
Thoughts?
### Run Module (works as it did before)
```nushell
❯ open test_module.nu
def main [] {
print $"$env.CURRENT_FILE = ($env.CURRENT_FILE?)"
print $"$env.FILE_PWD = ($env.FILE_PWD?)"
print $"$env.PROCESS_PATH = ($env.PROCESS_PATH?)"
}
❯ nu test_module.nu
$env.CURRENT_FILE = /Users/fdncred/src/nushell/test_module.nu
$env.FILE_PWD = /Users/fdncred/src/nushell
$env.PROCESS_PATH = test_module.nu
```
### Use Module (works as it did before)
```nushell
❯ open test_module2.nu
export-env {
print $"$env.CURRENT_FILE = ($env.CURRENT_FILE?)"
print $"$env.FILE_PWD = ($env.FILE_PWD?)"
print $"$env.PROCESS_PATH = ($env.PROCESS_PATH?)"
}
❯ use test_module2.nu
$env.CURRENT_FILE = /Users/fdncred/src/nushell/test_module.nu
$env.FILE_PWD = /Users/fdncred/src/nushell
$env.PROCESS_PATH =
```
### Sourced non-module script (this is the new part)
> [!NOTE]
> Note: We intentionally left out PROCESS_PATH since it's supposed to
> to work like argv[0] in C, which is the name of the program being
executed.
> Since we're not executing a program, we don't need to set it.
```nushell
❯ open test_source.nu
print $"$env.CURRENT_FILE = ($env.CURRENT_FILE?)"
print $"$env.FILE_PWD = ($env.FILE_PWD?)"
print $"$env.PROCESS_PATH = ($env.PROCESS_PATH?)"
❯ source test_source.nu
$env.CURRENT_FILE = /Users/fdncred/src/nushell/test_source.nu
$env.FILE_PWD = /Users/fdncred/src/nushell
$env.PROCESS_PATH =
```
Also, what is PROCESS_PATH even supposed to be?
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
- Refactor code to be simpler.
- Make the mentioned changes.
- `scopeguard` is added as a direct dependency. Helps simplify the code.
Rather than roll an ad-hoc version of it myself, I thought it would be
better to use `scopeguard` as it was already an indirect dependency.
# User-Facing Changes
- Add `--beginning` flag, which is used to validate the response and
provide early errors in case of unexpected inputs.
- Both `terminator` and `beginning` sequences (when provided) are not
included in the command's output. Turns out they are almost always
removed from the output, and because they are known beforehand they can
be added back by the user.
# Description
Removes unnecessary usages of `Call::rest_iter_flattened` and
`get_rest_for_glob_pattern` and replaces them with `CallExt::rest`.
# User-Facing Changes
None
# Description
This PR enables some tests that were disabled on macos.
We shall see if the CI passes. (Update: CI has passed.)
# User-Facing Changes
Should be no user-facing changes as only a test-file is modified.
# Tests + Formatting
Test coverage should increase
Co-authored-by: Jasha <jsimpson@hiddenroad.com>
# Description
Fixes#14470 where the `sys cpu` command is slow. This was done by
removing the `cpu_usage` column from the default output, since it takes
400ms to calculate. Instead a `--long` flag was added that, when
provided, adds back the `cpu_usage` column.
```nu
# Before
> bench { sys cpu | length } | get mean
401ms 591µs 896ns
# After
> bench { sys cpu | length } | get mean
500µs 13ns # around 1-2ms in practice
```
# User-Facing Changes
- `sys cpu` no longer has a `cpu_usage` column by default.
- Added a `--long` flag for `sys cpu` to add back the removed column.
# Description
The `explore` command is `less`-like, but it's missing the `Emacs`
keybindings for up/down and PageUp/PageDown as well as the "q" to quit
out. When I looked into adding those additional keybindings, I noticed
there was a lot of duplicated code in the various views, so I refactored
the code into a new `trait CursorMoveHandler`. I also noticed that there
was an existing `TODO: should we add a noop transition instead of doing
Option<Transition> everywhere?` comment in the code. I went ahead and
implemented a new `Transition::None`, and that made the new `trait
CursorMoveHandler` code MUCH cleaner, in addition to making some of the
old code a little cleaner as well.
# User-Facing Changes
Users that are used to the keybindings for `less` should feel much more
comfortable using `explore`.
# Tests + Formatting
Unfortunately, there aren't any existing tests for the `explore`
command, so I didn't know where I should add new tests to cover my code
changes.
---------
Co-authored-by: paulie4 <203125+paulie4@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
The [nushell/demo](https://github.com/nushell/demo) project successfully
demonstrated running Nushell in the browser using WASM. However, the
current version of Nushell cannot be easily built for the
`wasm32-unknown-unknown` target, the default for `wasm-bindgen`.
This PR introduces initial support for the `wasm32-unknown-unknown`
target by disabling OS-dependent features such as filesystem access, IO,
and platform/system-specific functionality. This separation is achieved
using a new `os` feature in the following crates:
- `nu-cmd-lang`
- `nu-command`
- `nu-engine`
- `nu-protocol`
The `os` feature includes all functionality that interacts with an
operating system. It is enabled by default, but can be disabled using
`--no-default-features`. All crates that depend on these core crates now
use `--no-default-features` to allow compilation for WASM.
To demonstrate compatibility, the following script builds all crates
expected to work with WASM. Direct user interaction, running external
commands, working with plugins, and features requiring `openssl` are out
of scope for now due to their complexity or reliance on C libraries,
which are difficult to compile and link in a WASM environment.
```nushell
[ # compatible crates
"nu-cmd-base",
"nu-cmd-extra",
"nu-cmd-lang",
"nu-color-config",
"nu-command",
"nu-derive-value",
"nu-engine",
"nu-glob",
"nu-json",
"nu-parser",
"nu-path",
"nu-pretty-hex",
"nu-protocol",
"nu-std",
"nu-system",
"nu-table",
"nu-term-grid",
"nu-utils",
"nuon"
] | each {cargo build -p $in --target wasm32-unknown-unknown --no-default-features}
```
## Caveats
This PR has a few caveats:
1. **`miette` and `terminal-size` Dependency Issue**
`miette` depends on `terminal-size`, which uses `rustix` when the target
is not Windows. However, `rustix` requires `std::os::unix`, which is
unavailable in WASM. To address this, I opened a
[PR](https://github.com/eminence/terminal-size/pull/68) for
`terminal-size` to conditionally compile `rustix` only when the target
is Unix. For now, the `Cargo.toml` includes patches to:
- Use my forked version of `terminal-size`.
- ~~Use an unreleased version of `miette` that depends on
`terminal-size@0.4`.~~
These patches are temporary and can be removed once the upstream changes
are merged and released.
2. **Test Output Adjustments**
Due to the slight bump in the `miette` version, one test required
adjustments to accommodate minor formatting changes in the error output,
such as shifted newlines.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
This shouldn't break anything but allows using some crates for targeting
`wasm32-unknown-unknown` to revive the demo page eventually.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
I did not add any extra tests, I just checked that compiling works, also
when using the host target but unselecting the `os` feature.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
~~Breaking the wasm support can be easily done by adding some `use`s or
by adding a new dependency, we should definitely add some CI that also
at least builds against wasm to make sure that building for it keep
working.~~
I added a job to build wasm.
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This PR makes it so that when a custom completer sets `options.sort` to
true, completions aren't sorted. Previously, in #13311, I'd made it so
that setting `sort` to true would sort in alphabetical order, while
omitting it or setting it to false would sort it in the default order
for the chosen match algorithm (alphabetical for prefix matching, fuzzy
match score for fuzzy matching). I'd assumed that you'd always want to
sort completions and the important thing was choosing alphabetical
sorting vs the default sort order for your match algorithm. However,
this assumption was incorrect (see #13696 and [this
thread](https://discord.com/channels/601130461678272522/1302332259227144294)
in Discord).
An alternative would be to make `sort` accept `"alphabetical"`,
`"smart"`, and `"none"`/`null` rather than keeping it a boolean. But
that would be a breaking change and require more discussion, and I
wanted to keep this PR simple/small so that we can go back to the
sensible behavior as soon as possible.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Here are the different scenarios:
- If your custom completer returns a record with an `options` field
that's a record:
- If `options` contains `sort: true`, completions **will be sorted
according to the order set in the user's config**. Previously, they
would have been sorted in alphabetical order. This does mean that
**custom completers cannot explicitly choose to sort in alphabetical
order** anymore. I think that's an acceptable trade-off, though.
- If `options` contains `sort: false`, completions will not be sorted.
#13311 broke things so they would be sorted in the default order for the
match algorithm used. Before that PR, completions would not have been
sorted.
- If there's no `sort` option, that **will be treated as `sort: true`**.
Previously, this would have been treated as `sort: false`.
- Otherwise, nothing changes. Completions will still be sorted.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added 1 test to make sure that completions aren't sorted with `sort:
false` explicitly set.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Before this PR, you can access rendered error values that are raised in
a `try/catch` block by accessing the `rendered` element of the catch
error value:
```
$ try { ls nonexist.txt } catch {|e| print "my cool error:" $e.rendered }
my cool error:
nu:🐚:directory_not_found
× Directory not found
help: /home/rose/nonexist.txt does not exist
```
However, the rendered errors don't include the labels present in the
real rendered error, which would look like this:
```
$ ls nonexist.txt
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #46:1:4]
1 │ ls nonexist.txt
· ──────┬─────
· ╰── directory not found
╰────
help: /home/rose/nonexist.txt does not exist
```
After this PR, the rendered error includes the labels:
```
$ try { ls nonexist.txt } catch {|e| print "my cool error:" $e.rendered }
my cool error:
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #4:1:10]
1 │ try { ls nonexist.txt } catch {|e| print "my cool error:" $e.rendered }
· ──────┬─────
· ╰── directory not found
╰────
help: /home/rose/nonexist.txt does not exist
```
This change is accomplished by using the standard error formatting code
to render an error. This respects the error theme as before without any
extra scaffolding, but it means that e.g., the terminal size is also
respected. I think this is fine because the way the error is rendered
already changed based on config, and I think that a "rendered" error
should give back _exactly_ what would be shown to the user anyway.
@fdncred, let me know if you have any concerns with the way this is
handled since you were the one who implemented this feature in the first
place.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
The `rendered` element of the `try`/`catch` error record now includes
labels in the error output.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
# Description
Implements #11234 based on the comments there:
* (Previously implemented): `into record` handles nanoseconds (as well
as milliseconds and microseconds, which the deprecated commands didn't
support).
* Added deprecation warning to `date to-record` and `date to-table`
* Added new example for `into record` showing the conversion to a table
* Changed `std/dt` to use `into record`
* Added "Deprecated" category back to nu-protocol::Signature
* Assigned the deprecated commands to the Deprecated category so be
categorized properly in the online Doc.
# User-Facing Changes
Deprecated command warning
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Searched doc for existing uses of `date to-record` and `date to-table`:
* For primary English-language docs, there are no uses other than in the
auto-generated command help, which will be updated based on this PR
* Other language translations appear to have an old use in several
places and will need to be updated to match the English-language doc.
# Description
While reviewing #14388, I think we can make some improvement on parser.
For the following code:
```nushell
let a = 3
a = 10 # should be error
$a = 10 # another error
```
I think they can raise `ParseError`, so nushell doesn't need to move
forward compiling IR block.
# User-Facing Changes
```nushell
let a = 3
a = 10
```
Will raise parse error instead of compile error.
# Tests + Formatting
Added 1 test.
# Description
Adds a new `Filesize` type so that `FromValue` can be used to convert a
`Value::Filesize` to a `Filesize`. Currently, to extract a filesize from
a `Value` using `FromValue`, you have to extract an `i64` which coerces
`Value::Int`, `Value::Duration`, and `Value::Filesize` to an `i64`.
Having a separate type also allows us to enforce checked math to catch
overflows. Similarly, it allows us to specify other trait
implementations like `Display` in a common place.
# User-Facing Changes
Multiplication with filesizes now error on overflow. Should not be a
breaking change for plugins (i.e., serialization) since `Filesize` is
marked with `serde(transparent)`.
# Tests + Formatting
Updated some tests.
# Description
This removes the need for the `shape_and` and `shape_or` entries in the
themes. We did not color those underlying FlatShapes or operators
differently.
Closes#14372
# User-Facing Changes
Our theme handling currently doesn't reject invalid entries so should
not cause an error. The non-functional nature was already documented.
# Description
Follow up to #14341. Changes the fields of `Hooks` to `Vec` or `Hashmap`
to match the new config defaults.
# User-Facing Changes
Mostly the same as #14341. `pre_prompt` and `pre_execution` must now be
a list, and `env_change` must be a record.
# Description
Before this PR, `length` did not check its input type at run-time, so it
would attempt to calculate a length for any input with indeterminate
type (e.g., `echo` which has an `any` output type). This PR makes
`length` only work on the types specifically supported in its
input/output types (list/table, binary, and nothing), making the
behavior the same at parse-time and at run-time.
Fixes#14462
# User-Facing Changes
Length will error if passed an unsupported type:
Before (only caught at parse-time):
```nushell
"hello" | length
Error: nu::parser::input_type_mismatch
× Command does not support string input.
╭─[entry #2:1:11]
1 │ "hello" | length
· ───┬──
· ╰── command doesn't support string input
╰────
echo "hello" | length
# => 1
```
After (caught at parse-time and run-time):
```nushell
"hello" | length
Error: nu::parser::input_type_mismatch
× Command does not support string input.
╭─[entry #22:1:11]
1 │ "hello" | length
· ───┬──
· ╰── command doesn't support string input
╰────
echo "hello" | length
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #23:1:6]
1 │ echo "hello" | length
· ───┬─── ───┬──
· │ ╰── only list, table, binary, and nothing input data is supported
· ╰── input type: string
╰────
```
# Description
When looking into #14395, I found that `unicode-width` from 0.1 to 0.2
contains a breaking change, the mainly change is it treats newlines as
width 1. So relative tests(str stats) are broken.
But I think it's ok to adjust the test.
# User-Facing Changes
The output of `str stats` might change if there are `\n` in the input.
### Before
```nushell
> "a\nb" | str stats | get unicode-width
2
```
### After
```nushell
> "a\nb" | str stats | get unicode-width
3
```
# Tests + Formatting
Adjusted 2 tests.
# After Submitting
NaN
# Description
Due to #14249 loading `default_env.nu` before the user's `env.nu`,
variables that were defined there were overriding:
* Inherited values
* Some values that were set in the Rust code, such as the `NU_LIB_PATH`
when set using `--include-path`.
This change checks to see if a variable already exists, uses its value
if so, and sets the default value otherwise.
Note: `ENV_CONVERSIONS` is still "forced" to a default value regardless,
as it needs to run reliably. There's probably not much reason to inherit
it, but I'm open to the idea if there's a use-case.
# User-Facing Changes
* Before: Variables that were set in `default_env.nu` always overrode
those that were inherited from the parent process or set internally
* After: Inherited and internal environment variables will take
priority.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Will try to find a good place to mention this behavior in the Config
chapter updates
# Description
Someone noticed today that I had left a TODO in the Readme. It has since
been completed and needed to be removed. Also made some other minor
fixes and wordsmithing while I was in it.
# User-Facing Changes
None
# Tests + Formatting
Clippy and fmt passed, and that should be all that matters on the
Readme.
# After Submitting
N/A
# Description
The test is failed when updating miette from 7.2 to 7.3. After looking
into the test, I think it's ok to adjust test.
# User-Facing Changes
For the given custom command:
```nushell
def force_error [ x: any ] {
error make {
msg: "oh no!"
label: {
text: "here's the error"
span: (metadata $x).span
}
}
}
```
### Before
```
> force_error "My error"
Error: × oh no!
╭─[entry #8:1:13]
1 │ force_error "My error"
· ─────┬────
· ╰── here's the error
╰────
```
### After
```
> force_error "My error"
Error:
× oh no!
╭─[entry #9:1:13]
1 │ force_error "My error"
· ─────┬────
· ╰── here's the error
╰────
```
As we can see, the message `oh no!` is output in a new line, and there
is one less trailing line. I have makes some testing, and it seems that
it only happened on `error make` command.
# Tests + Formatting
Changed 1 test
# After Submitting
NaN
# Description
@fdncred mentioned that we should be dogfooding the latest Reedline
changes in Nushell. Hoping I got the steps correct.
# User-Facing Changes
New keybindings for:
* Insert Newline: <kbd>Alt</kbd>+<kbd>Enter</kbd> and
<kbd>Shift</kbd>+<kbd>Enter</kbd>
* Enter: <kbd>Ctrl</kbd>+<kbd>J</kbd>
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
# Description
Propagate existing errors in the pipeline, rather than a type error.
# User-Facing Changes
Nothing that previously worked should be affected, this should just
change the errors.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
As I'm working on PWD-per-drive feature. Once the plugin test of env
failed. I checked the log, found sometime Windows can give drive letter
as lowercase, so the test case should be rewrite to check first letter
caseinsensitive equal, and following part normal equal.
```
assert_eq! failed at tests/plugins/env.rs:43:5
left: r"e:\Study\Nushell"
right: r"E:\Study\Nushell"
```
---------
Co-authored-by: Zhenping Zhao <pegasus.cadence@gmail.com>
# Description
As a bit of a follow-on to #13802 and #14249, this (pretty much a
"one-line" change) really does *always* populate the `$env.config`
record with the `nu-protocol::config` defaults during startup. This
means that an `$env.config` record is value (with defaults) even during:
* `nu -n` to suppress loading of config files
* `nu -c <commandstring>`
* `nu <script>`
# User-Facing Changes
There should be no case in which there isn't a valid `$env.config`.
* Before:
```nushell
nu -c "$env.config"
# -> Error
```
* After:
```nushell
nu -c "$env.config"
# -> Default $env.config record
```
Startup time impact is negligible (17.072µs from `perf!` on my system) -
Seems well worth it.
# Tests + Formatting
Added tests for several `-n -c` cases.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Config chapter update still in progress.
# Description
i was playing with the NDNUON format and using local definitions of
`from ndnuon` and `to ndnuon` but then i thought they could live in the
standard library next to `from ndjson` and `to ndjson` 😋
# User-Facing Changes
users can now add the following to their configs and get NDNUON ready to
go
```nushell
use std formats ["from ndnuon" "to ndnuon"]
```
# Tests + Formatting
i did simply mimic the tests for `from ndjson` and `to ndjson`, i hope
it's fine since the recent big change to the standard library
# After Submitting
---------
Co-authored-by: Douglas <32344964+NotTheDr01ds@users.noreply.github.com>
# Description
As title, this pr is going to deprecate `--ignore-shell-errors` and
`--ignore-program-errors`.
Because I think these two flags makes `do` command complicate, and it
should be easy to use `-i` instead.
# User-Facing Changes
After the pr, using these two flags will raise deprecated warning.
```nushell
> do --ignore-program-errors { ^pwd }
Error: × Deprecated option
╭─[entry #2:1:1]
1 │ do --ignore-program-errors { ^pwd }
· ─┬
· ╰── `--ignore-program-errors` is deprecated and will be removed in 0.102.0.
╰────
help: Please use the `--ignore-errors(-i)`
/home/windsoilder/projects/nushell
> do --ignore-shell-errors { ^pwd }
Error: × Deprecated option
╭─[entry #3:1:1]
1 │ do --ignore-shell-errors { ^pwd }
· ─┬
· ╰── `--ignore-shell-errors` is deprecated and will be removed in 0.102.0.
╰────
help: Please use the `--ignore-errors(-i)`
/home/windsoilder/projects/nushell
```
# Tests + Formatting
NaN
# Description
List values and list streams have the same type (`list<>`). Rather,
streaming is a separate property of the pipeline/command output. This PR
removes the unnecessary `ListStream` type.
# User-Facing Changes
Should be none, except `random dice` now has a more specific output
type.
# Description
Fixes: #13159
After the change, `std help` will no-longer print out "double error"
messages.
Actually I think it's tricky to make it right. To make `help <cmd>`
keeps paging feature from fallback `man` command. I have to split
`commands` into `scope-commands` and `external-commands`.
If we don't split it, simply call `let commands = (try { commands
$target_item --find $find })` in `help main` will cause us to lost
paging feature, which is not we want.
A comment from original issue:
> If there are no objections, I'd like to remove the man page fallback
code from std help for the moment. While it's probably fixable, it's
also platform specific and requires testing on all platforms. It also
seems like a low-value add here.
Actually I think it's a beautiful feature of `std help`, so I want to
keep it here.
# User-Facing Changes
### Before
```nushell
> help commands asdfadsf
Help pages from external command asdfadsf:
No manual entry for asdfadsf
Error: × std::help::command_not_found
╭─[entry #11:1:15]
1 │ help commands asdfadsf
· ────┬───
· ╰── command not found
╰────
```
### After
```nushell
> help commands asdfasdf
Help pages from external command asdfasdf:
No manual entry for asdfasdf
```
# Tests + Formatting
Actually it's a little hard to add test because it required user input
(especially for fallback `man` command)
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.27.3 to
1.28.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.28.1</h2>
<h2>[1.28.1] - 2024-11-26</h2>
<h3>Fixes</h3>
<ul>
<li>Add back in <code>lock</code> file types accidentally removed in
1.28 (<code>go.sum</code>, <code>requirements.txt</code>)</li>
</ul>
<h2>v1.28.0</h2>
<h2>[1.28.0] - 2024-11-25</h2>
<h3>Features</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1139">November
2024</a> changes</li>
<li>Add many new types and file extensions to the
<code>--type-list</code>, including ada, alire, bat, candid, carp, cml,
devicetree, dita, dockercompose, grpbuild, graphql, hare, lean, meson,
prolog, raku, reasonml, rescript, solidity, svelte, usd, v, wgsl</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.28.1] - 2024-11-26</h2>
<h3>Fixes</h3>
<ul>
<li>Add back in <code>lock</code> file types accidentally removed in
1.28 (<code>go.sum</code>, <code>requirements.txt</code>)</li>
</ul>
<h2>[1.28.0] - 2024-11-25</h2>
<h3>Features</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1139">November
2024</a> changes</li>
<li>Add many new types and file extensions to the
<code>--type-list</code>, including ada, alire, bat, candid, carp, cml,
devicetree, dita, dockercompose, grpbuild, graphql, hare, lean, meson,
prolog, raku, reasonml, rescript, solidity, svelte, usd, v, wgsl</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="bd36f89fcd"><code>bd36f89</code></a>
chore: Release</li>
<li><a
href="9b3917ceee"><code>9b3917c</code></a>
docs: Update changelog</li>
<li><a
href="8a0dae6793"><code>8a0dae6</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1159">#1159</a>
from epage/go</li>
<li><a
href="70f236086f"><code>70f2360</code></a>
fix: Re-add go.sum, requirements.txt to 'lock' file type</li>
<li><a
href="78d6d22744"><code>78d6d22</code></a>
chore: Release</li>
<li><a
href="e75389e6fb"><code>e75389e</code></a>
chore: Release</li>
<li><a
href="cd4f2950fc"><code>cd4f295</code></a>
docs: Update changelog</li>
<li><a
href="bdcd9c54e3"><code>bdcd9c5</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1157">#1157</a>
from epage/dict</li>
<li><a
href="31e5b4f5b5"><code>31e5b4f</code></a>
feat(dict): November updates</li>
<li><a
href="ea6fdd1371"><code>ea6fdd1</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1154">#1154</a>
from dseight/master</li>
<li>Additional commits viewable in <a
href="https://github.com/crate-ci/typos/compare/v1.27.3...v1.28.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
The `.nu-env` file feature was removed some time ago (probably in the
engine-q upgrade?). The tests, however, still remained as dead-code, so
this is just some basic clean-up.
If this feature was ever implemented again, the tests would need to be
rewritten anyway due to the changes in the way config is handled.
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
-
# After Submitting
N/A
# Description
I just completely left out `$env.PROMPT_COMMAND_RIGHT` in the
`sample_env.nu`. This adds it in.
# User-Facing Changes
`config env --sample` will now include doc for `PROMPT_COMMAND_RIGHT`.
# Tests + Formatting
Doc-only
# After Submitting
n/a
## Related
- #10150
- https://github.com/nushell/nushell/pull/10150#issuecomment-1721238336
- #10387
- https://github.com/nushell/nushell/pull/10387#issuecomment-1722228185
# Description
`term query`: a command for querying information from the terminal.
Prints the `$query`, and immediately starts reading raw bytes from
stdin.
The standard input will be read until the `terminator` sequence is
encountered.
The `terminator` is not removed from the output.
It also stops on <kbd>Ctrl-C</kbd> with an error.
```
Usage:
> term query {flags} <query>
Flags:
-h, --help: Display the help message for this command
-t, --terminator (required parameter) <one_of(binary, string)>: stdin will be read until this sequence is encountered
Parameters:
query <one_of(binary, string)>: The query that will be printed to stdout
```
This was previously possible with `input` until #10150.
`input` command's features such as cursor control, deleting input etc.
are useful, but interfere with this use case.
`term query` makes the following uses possible:
```nushell
# get the terminal size with ansi escape codes
def terminal-size [] {
let response = term query (ansi size) --terminator 'R'
# $response should look like this
# Length: 9 (0x9) bytes | printable whitespace ascii_other non_ascii
# 00000000: 1b 5b 33 38 3b 31 35 30 52 •[38;150R
let sz = $response | bytes at 2..<-1 | decode
# 38;150
# $sz should look like 38;150
let size = ($sz | split row ';' | each {into int})
# output in record syntax
{
rows: $size.0
columns: $size.1
}
}
```
```nushell
# read clipboard content using OSC 52
term query $"(ansi --osc '52;c;?')(ansi st)" --terminator (ansi st)
| bytes at 7..<-2
| decode
| decode base64
| decode
```
# User-Facing Changes
- added `ansi query`
# Tests + Formatting
- Integration tests should be added if possible.
# Description
The "append" operator currently serves as both the append operator and
the concatenation operator. This dual role creates ambiguity when
operating on nested lists.
```nu
[1 2] ++ 3 # appends a value to a list [1 2 3]
[1 2] ++ [3 4] # concatenates two lists [1 2 3 4]
[[1 2] [3 4]] ++ [5 6]
# does this give [[1 2] [3 4] [5 6]]
# or [[1 2] [3 4] 5 6]
```
Another problem is that `++=` can change the type of a variable:
```nu
mut str = 'hello '
$str ++= ['world']
($str | describe) == list<string>
```
Note that appending is only relevant for lists, but concatenation is
relevant for lists, strings, and binary values. Additionally, appending
can be expressed in terms of concatenation (see example below). So, this
PR changes the `++` operator to only perform concatenation.
# User-Facing Changes
Using the `++` operator with a list and a non-list value will now be a
compile time or runtime error.
```nu
mut list = []
$list ++= 1 # error
```
Instead, concatenate a list with one element:
```nu
$list ++= [1]
```
Or use `append`:
```nu
$list = $list | append 1
```
# After Submitting
Update book and docs.
---------
Co-authored-by: Douglas <32344964+NotTheDr01ds@users.noreply.github.com>
# Description
This PR removes the `terminal_size` crate everywhere that it made sense.
I replaced it with crossterm's version called `size`. The places I
didn't remove it were the places that did not have a dependency on
crossterm. So, I thought it was "cheaper" to have a dep on term_size vs
crossterm in those locations.
# Description
Apparently it should be joint CRLF for the EOL marker
https://www.rfc-editor.org/rfc/rfc2616#section-2.2
Plain LF isn't particularly standardized and many backends don't
recognize it. Tested on `starlette`
# User-Facing Changes
None
# Tests + Formatting
It's two characters; everything passes
# After Submitting
Not needed
# User-Facing Changes
- `expected <type>` errors are now propagated from
`Closure | Block | Expression` instead of falling back to
"expected one of..." for the block:
Before:
```nushell
def foo [bar: bool] {}
if true {} else { foo 1 }
────┬────
╰── expected one of a list of accepted shapes: [Block, Expression]
```
After:
```nushell
if true {} else { foo 1 }
┬
╰── expected bool
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes it so that when using fuzzy matching, the score isn't
recomputed when sorting. Instead, filtering and sorting suggestions is
handled by a new `NuMatcher` struct. This struct accepts suggestions
and, if they match the user's typed text, stores those suggestions
(along with their scores and values). At the end, it returns a sorted
list of suggestions.
This probably won't have a noticeable impact on performance, but it
might be helpful if we start using Nucleo in the future.
Minor change: Makes `find_commands_by_predicate` in `StateWorkingSet`
and `EngineState` take `FnMut` rather than `Fn` for the predicate.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
When using case-insensitive matching, if you have two matches `FOO` and
`abc`, `abc` will be shown before `FOO` rather than the other way
around. I think this way makes more sense than the current behavior.
When I brought this up on Discord, WindSoilder did say it would make
sense to show uppercase matches first if the user typed, say, `F`.
However, that would be a lot more complicated to implement.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added a test for the changes in
https://github.com/nushell/nushell/pull/13302.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- fixes#14398
I will properly fill out this PR and fix any tests that might break when
I have the time, this was a quick fix.
# Description
This PR makes `from csv` and `from tsv`, with the `--flexible` flag,
stop dropping extra/unexpected columns.
# User-Facing Changes
`$text`'s contents
```csv
value
1,aaa
2,bbb
3
4,ddd
5,eee,extra
```
Old behavior
```nushell
> $text | from csv --flexible --noheaders
╭─#─┬─column0─╮
│ 0 │ value │
│ 1 │ 1 │
│ 2 │ 2 │
│ 3 │ 3 │
│ 4 │ 4 │
│ 5 │ 5 │
╰─#─┴─column0─╯
```
New behavior
```nushell
> $text | from csv --flexible --noheaders
╭─#─┬─column0─┬─column1─┬─column2─╮
│ 0 │ value │ ❎ │ ❎ │
│ 1 │ 1 │ aaa │ ❎ │
│ 2 │ 2 │ bbb │ ❎ │
│ 3 │ 3 │ ❎ │ ❎ │
│ 4 │ 4 │ ddd │ ❎ │
│ 5 │ 5 │ eee │ extra │
╰─#─┴─column0─┴─column1─┴─column2─╯
```
- The first line in a csv (or tsv) document no longer limits the number
of columns
- Missing values in columns are longer automatically filled with `null`
with this change, as a later row can introduce new columns. **BREAKING
CHANGE**
Because missing columns are different from empty columns, operations on
possibly missing columns will have to use optional access syntax e.g.
`get foo` => `get foo?`
# Tests + Formatting
Added examples that run as tests and adjusted existing tests to confirm
the new behavior.
# After Submitting
Update the workaround with fish completer mentioned
[here](https://www.nushell.sh/cookbook/external_completers.html#fish-completer)
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Make NuShell correctly inherit and update `SHLVL` from other shells
(obviously including itself) in Unix environment.
See issue #14384
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
New code formatted.
New feature works well in interactive usage.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This commit upgrades calamine in order to benefit from recent
developments, e.g. ignore annotations in column headers (see
https://github.com/tafia/calamine/pull/467 for reference).
# Description
I'm not quite sure what the point of the `split-by` command is. The only
example for the command seems to suggest it's an additional grouping
command. I.e., a record that seems to be the output of the `group-by`
command is passed to `split-by` which then adds an additional layer of
grouping based on a different column.
# User-Facing Changes
Breaking change, deprecated the command.
# Release-Notes Short Description
* Nushell now always loads its internal `default_env.nu` before the user
`env.nu` is loaded, then loads the internal `default_config.nu` before
the user's `config.nu` is loaded. This allows for a simpler
user-configuration experience. The Configuration Chapter of the Book
will be updated soon with the new behavior.
# Description
Implements the main ideas in #13671 and a few more:
* Users can now specify only the environment and config options they
want to override in *their* `env.nu` and `config.nu`and yet still have
access to all of the defaults:
* `default_env.nu` (internally defined) will be loaded whenever (and
before) the user's `env.nu` is loaded.
* `default_config.nu` (internally defined) will be loaded whenever (and
before) the user's `config.nu` is loaded.
* No more 900+ line config out-of-the-box.
* Faster startup (again): ~40-45% improvement in launch time with a
default configuration.
* New keys that are added to the defaults in the future will
automatically be available to all users after updating Nushell. No need
to regenerate config to get the new defaults.
* It is now possible to have different internal defaults (which will be
used with `-c` and scripts) vs. REPL defaults. This would have solved
many of the user complaints about the [`display_errors`
implementation](https://www.nushell.sh/blog/2024-09-17-nushell_0_98_0.html#non-zero-exit-codes-are-now-errors-toc).
* A basic "scaffold" `config.nu` and `env.nu` are created on first
launch (if the config directory isn't present).
* Improved "out-of-the-box" experience (OOBE) - No longer asks to create
the files; the minimal scaffolding will be automatically created. If
deleted, they will not be regenerated. This provides a better
"out-of-the-box" experience for the user as they no longer have to make
this decision (without much info on the pros or cons) when first
launching.
* <s>(New: 2024-11-07) Runs the env_conversions process after the
`default_env.nu` is loaded so that users can treat `Path`/`PATH` as
lists in their own config.</s>
* (New: 2024-11-08) Given the changes in #13802, `default_config.nu`
will be a minimal file to minimize load-times. This shaves another (on
my system) ~3ms off the base launch time.
* Related: Keybindings, menus, and hooks that are already internal
defaults are no longer duplicated in `$env.config`. The documentation
will be updated to cover these scenarios.
* (New: 2024-11-08) Move existing "full" `default_config.nu` to
`sample_config.nu` for short-term "documentation" purposes.
* (New: 2024-11-18) Move the `dark-theme` and `light-theme` to Standard
Library and demonstrate their use - Also improves startup times, but
we're reaching the limit of optimization.
* (New: 2024-11-18) Extensively documented/commented `sample_env.nu` and
`sample_config.nu`. These can be displayed in-shell using (for example)
`config nu --sample | nu-highlight | less -R`. Note: Much of this will
eventually be moved to or (some) duplicated in the Doc. But for now,
this some nice in-shell doc that replaces the older
"commented/documented default".
* (New: 2024-11-20) Runs the `ENV_CONVERSIONS` process (1) after the
`default_env.nu` (allows `PATH` to be used as a list in user's `env.nu`)
and (2) before `default_config.nu` is loaded (allows user's
`ENV_CONVERSIONS` from their `env.nu` to be used in their `config.nu`).
* <s>(New: 2024-11-20) The default `ENV_CONVERSIONS` is now an empty
record. The internal Rust code handles `PATH` (and variants) conversions
regardless of the `ENV_CONVERSIONS` variable. This shaves a *very* small
amount of time off the startup.</s> Reset - Looks like there might be a
bug in `nu-enginer::env::ensure_path()` on Windows that would need to be
fixed in order for this to work.
# User-Facing Changes
By default, you shouldn't see much, if any, change when running this
with your existing configuration.
To see the greatest benefit from these changes, you'll probably want to
start with a "fresh" config. This can be easily tested using something
like:
```nushell
let temp_home = (mktemp -d)
$env.XDG_CONFIG_HOME = $temp_home
$env.XDG_DATA_HOME = $temp_home
./target/release/nu
```
You should see a message where the (mostly empty) `env.nu` and
`config.nu` are created on first start. Defaults should be the same (or
similar to) those before the PR. Please let me know if you notice any
differences.
---
Users should now specify configuration in terms of overrides of each
setting. For instance, rather than modifying `history` settings in the
monolithic `config.nu`, the following is recommended in an updated
`config.nu`:
```nu
$env.config.history = {
file_format: sqlite,
sync_on_enter: true
isolation: true
max_size: 1_000_000
}
```
or even just:
```nu
$env.config.history.file_format = sqlite
$env.config.history.isolation: true
$env.config.history.max_size = 1_000_000
```
Note: It seems many users are already appending a `source my_config.nu`
(or similar pattern) to the end of the existing `config.nu` to make
updates easier. In this case, they will likely want to remove all of the
previous defaults and just move their `my_config.nu` to `config.nu`.
Note: It should be unlikely that there are any breaking changes here,
but there's a slim chance that some code, somewhere, *expects* an
absence of certain config values. Otherwise, all config values are
available before and after this change.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Configuration Chapter (and related) of the doc is currently WIP and will
be finished in time for 0.101 release.
# Description
By request, this PR introduces a new `--flatten` parameter to the ast
command for generating a more readable version of the AST output. This
enhancement improves usability by allowing users to easily visualize the
structure of the AST.
```nushell
❯ ast 'ls | sort-by type name -i' --flatten --json
[
{
"content": "ls",
"shape": "shape_internalcall",
"span": {
"start": 0,
"end": 2
}
},
{
"content": "|",
"shape": "shape_pipe",
"span": {
"start": 3,
"end": 4
}
},
{
"content": "sort-by",
"shape": "shape_internalcall",
"span": {
"start": 5,
"end": 12
}
},
{
"content": "type",
"shape": "shape_string",
"span": {
"start": 13,
"end": 17
}
},
{
"content": "name",
"shape": "shape_string",
"span": {
"start": 18,
"end": 22
}
},
{
"content": "-i",
"shape": "shape_flag",
"span": {
"start": 23,
"end": 25
}
}
]
❯ ast 'ls | sort-by type name -i' --flatten --json --minify
[{"content":"ls","shape":"shape_internalcall","span":{"start":0,"end":2}},{"content":"|","shape":"shape_pipe","span":{"start":3,"end":4}},{"content":"sort-by","shape":"shape_internalcall","span":{"start":5,"end":12}},{"content":"type","shape":"shape_string","span":{"start":13,"end":17}},{"content":"name","shape":"shape_string","span":{"start":18,"end":22}},{"content":"-i","shape":"shape_flag","span":{"start":23,"end":25}}]
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR allows nushell to run powershell scripts easier. You can already
do `powershell -c script.ps1` but this PR takes it a step further by
doing the `powershell -c` part for you. So, if you have script.ps1 you
can execute it by running it in the command position of the repl.
or once it's in json, just consume it with nushell.
# User-Facing Changes
Easier to run powershell scripts. It should work on Windows with
powershell.exe.
# Tests + Formatting
Added 1 test
# After Submitting
---------
Co-authored-by: Wind <WindSoilder@outlook.com>
# Description
Because the IR compiler was previously optional, compile errors were not
treated as fatal errors, and were just logged like parse warnings are.
This unfortunately meant that if a user encountered a compile error,
they would see "Can't evaluate block in IR mode" as the actual error in
addition to (hopefully) logging the compile error.
This changes compile errors to be treated like parse errors so that they
show up as the last error, helping users understand what's wrong a
little bit more easily.
Fixes#14333.
# User-Facing Changes
- Shouldn't see "Can't evaluate block in IR mode"
- Should only see compile error
- No evaluation should happen
# Tests + Formatting
Didn't add any tests specifically for this, but it might be good to have
at least one that checks to ensure the compile error shows up and the
"can't evaluate" error does not.
Bumps [thiserror](https://github.com/dtolnay/thiserror) from 1.0.69 to
2.0.3.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/thiserror/releases">thiserror's
releases</a>.</em></p>
<blockquote>
<h2>2.0.3</h2>
<ul>
<li>Support the same Path field being repeated in both Debug and Display
representation in error message (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/383">#383</a>)</li>
<li>Improve error message when a format trait used in error message is
not implemented by some field (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/384">#384</a>)</li>
</ul>
<h2>2.0.2</h2>
<ul>
<li>Fix hang on invalid input inside #[error(...)] attribute (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/382">#382</a>)</li>
</ul>
<h2>2.0.1</h2>
<ul>
<li>Support errors that contain a dynamically sized final field (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/375">#375</a>)</li>
<li>Improve inference of trait bounds for fields that are interpolated
multiple times in an error message (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/377">#377</a>)</li>
</ul>
<h2>2.0.0</h2>
<h2>Breaking changes</h2>
<ul>
<li>
<p>Referencing keyword-named fields by a raw identifier like
<code>{r#type}</code> inside a format string is no longer accepted;
simply use the unraw name like <code>{type}</code> (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/347">#347</a>)</p>
<p>This aligns thiserror with the standard library's formatting macros,
which gained support for implicit argument capture later than the
release of this feature in thiserror 1.x.</p>
<pre lang="rust"><code>#[derive(Error, Debug)]
#[error("... {type} ...")] // Before: {r#type}
pub struct Error {
pub r#type: Type,
}
</code></pre>
</li>
<li>
<p>Trait bounds are no longer inferred on fields whose value is shadowed
by an explicit named argument in a format message (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/345">#345</a>)</p>
<pre lang="rust"><code>// Before: impl<T: Octal> Display for
Error<T>
// After: impl<T> Display for Error<T>
#[derive(Error, Debug)]
#[error("{thing:o}", thing = "...")]
pub struct Error<T> {
thing: T,
}
</code></pre>
</li>
<li>
<p>Tuple structs and tuple variants can no longer use numerical
<code>{0}</code> <code>{1}</code> access at the same time as supplying
extra positional arguments for a format message, as this makes it
ambiguous whether the number refers to a tuple field vs a different
positional arg (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/354">#354</a>)</p>
<pre lang="rust"><code>#[derive(Error, Debug)]
#[error("ambiguous: {0} {}", $N)]
// ^^^ Not allowed, use #[error("... {0} {n}", n = $N)]
pub struct TupleError(i32);
</code></pre>
</li>
<li>
<p>Code containing invocations of thiserror's <code>derive(Error)</code>
must now have a direct dependency on the <code>thiserror</code> crate
regardless of the error data structure's contents (<a
href="https://redirect.github.com/dtolnay/thiserror/issues/368">#368</a>,
<a
href="https://redirect.github.com/dtolnay/thiserror/issues/369">#369</a>,
<a
href="https://redirect.github.com/dtolnay/thiserror/issues/370">#370</a>,
<a
href="https://redirect.github.com/dtolnay/thiserror/issues/372">#372</a>)</p>
</li>
</ul>
<h2>Features</h2>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="15fd26e476"><code>15fd26e</code></a>
Release 2.0.3</li>
<li><a
href="7046023130"><code>7046023</code></a>
Simplify how has_bonus_display is accumulated</li>
<li><a
href="9cc1d0b251"><code>9cc1d0b</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/thiserror/issues/384">#384</a>
from dtolnay/nowrap</li>
<li><a
href="1d040f358a"><code>1d040f3</code></a>
Use Var wrapper only for Pointer formatting</li>
<li><a
href="6a6132d79b"><code>6a6132d</code></a>
Extend no-display ui test to cover another fmt trait</li>
<li><a
href="a061beb9dc"><code>a061beb</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/thiserror/issues/383">#383</a>
from dtolnay/both</li>
<li><a
href="63882935be"><code>6388293</code></a>
Support Display and Debug of same path in error message</li>
<li><a
href="dc0359eeec"><code>dc0359e</code></a>
Defer binding_value construction</li>
<li><a
href="520343e37d"><code>520343e</code></a>
Add test of Debug and Display of paths</li>
<li><a
href="49be39dee1"><code>49be39d</code></a>
Release 2.0.2</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/thiserror/compare/1.0.69...2.0.3">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [shadow-rs](https://github.com/baoyachi/shadow-rs) from 0.35.2 to
0.36.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/baoyachi/shadow-rs/releases">shadow-rs's
releases</a>.</em></p>
<blockquote>
<h2>v0.36.0</h2>
<h2>What's Changed</h2>
<ul>
<li>feat(HookExt): Add extended hook functionality with custom deny
lists by <a
href="https://github.com/baoyachi"><code>@baoyachi</code></a> in <a
href="https://redirect.github.com/baoyachi/shadow-rs/pull/190">baoyachi/shadow-rs#190</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.35.2...v0.36.0">https://github.com/baoyachi/shadow-rs/compare/v0.35.2...v0.36.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="909510eb5d"><code>909510e</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/190">#190</a>
from baoyachi/hook_ext</li>
<li><a
href="bad046d7a0"><code>bad046d</code></a>
Update Cargo.toml</li>
<li><a
href="84096a02c0"><code>84096a0</code></a>
feat(HookExt): Add extended hook functionality with custom deny
lists</li>
<li>See full diff in <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.35.2...v0.36.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
What it says on the tin, this change adds the `mac` and `ip` columns to
the `sys net` command, where `mac` is the interface mac address and `ip`
is a record containing ipv4 and ipv6 addresses as well as whether or not
the address is loopback and multicast. I thought it might be useful to
have this information available in Nushell. This change basically just
pulls extra information out of the underlying structs in the
`sysinfo::Networks` struct. Here's a screenshot from my system:
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Adds `mac` and `ip` columns to the `sys net` command, where `mac`
contains the interface's mac address and `ip` contains information
extracted from the `std::net::IpAddr` struct, including address,
protocol, whether or not the address is loopback, and whether or not
it's multicast
# Tests + Formatting
Didn't add any tests specifically, didn't seem like there were any
relevant tests. Ran existing tests and formatting.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# Description
I was reading through the documentation yesterday, when I stumbled upon
[this
section](https://www.nushell.sh/book/pipelines.html#behind-the-scenes)
explaining how command output is formatted using the `table` command. I
was surprised that this section didn't mention the `display_output`
hook, so I took a look in the code and was shocked to discovered that
the documentation was correct, and the `table` command _is_
automatically applied to printed pipelines.
This auto-tabling has two ramifications for the `display_output` hook:
1. The `table` command is called on the output of a pipeline after the
`display_output` has run, even if `display_output` contains the table
command. This means each pipeline output is roughly equivalent to the
following (using `ls` as an example):
```nushell
ls | do $config.hooks.display_output | table
```
2. If `display_output` returns structured data, it will _still_ be
formatted through the table command.
This PR removes the auto-table when the `display_output` hook is set.
The auto-table made sense before `display_output` was introduced, but to
me, it now seems like unnecessary "automagic" which can be accomplished
using existing Nushell features.
This means that you can now pull back the curtain a bit, and replace
your `display_output` hook with an empty closure
(`$env.config.hooks.display_output = {||}`, setting it to null retains
the previous behavior) to see the values printed normally without the
table formatting. I think this is a good thing, and makes it easier to
understand Nushell fundamentals.
It is important to note that this PR does not change how `print` and
other commands (well, specifically only `watch`) print out values. They
continue to use `table` with no arguments, so changing your
config/`display_output` hook won't affect what `print`ing a value does.
Rel: [Discord
discussion](https://discord.com/channels/601130461678272522/615329862395101194/1307102690848931904)
(cc @dcarosone)
# User-Facing Changes
Pipelines are no longer automatically formatted using the `table`
command. Instead, the `display_output` hook is used to format pipeline
output. Most users should see no impact, as the default `display_output`
hook already uses the `table` command.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Will update mentioned docs page to call out `display_output` hook.
# Description
Bump `quick-xml` to `0.37.0`.
This came about rebasing `nushell` in Fedora, which now has `quick-xml`
0.36.
There is one breaking change in 0.33 as far as `nu-command` is
concerned, in that `Event::PI` is now a dedicated `BytesPI` type:
https://github.com/tafia/quick-xml/blob/master/Changelog.md#misc-changes-5
I've tested compiling and testing locally with `0.33.0`, `0.36.0` and
`0.37.0` - but let's future-proof by requiring `0.37.0`.
# User-Facing Changes
N/A
# Tests + Formatting
No additional tests required, existing tests pass
# After Submitting
N/A
Signed-off-by: Michel Lind <salimma@fedoraproject.org>
# Description
Closes: #14248
# User-Facing Changes
Added a `--default` flag to input command, and it also added an extra
output to prompt:
```
> let x = input -d 18 "input your age"
input your age (default: 18)
> $x
18
> let x = input -d 18
> $x
18
```
# Tests + Formatting
I don't think it's easy to add a test for it :-(
# Description
This PR updates the uutils/coreutils crates to the latest version. I
hard-coded debug to false, a new uu_mv parameter. It may be interesting
to add that but I just wanted to get all the uu crates on the same
version.
I had to update the tests because --no-clobber works but doesn't say
anything when it's not clobbering and previously we were checking for an
error message.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Part of https://github.com/nushell/nushell/issues/11549
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds a `utouch` command that uses the `touch` command from
https://github.com/uutils/coreutils. Eventually, `utouch` may be able to
replace `touch`.
The conflicts in Cargo.lock and Cargo.toml are because I'm using the
uutils/coreutils main rather than the latest release, since the changes
that expose `uu_touch`'s internal functionality aren't available in the
latest release.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users will have access to a new `utouch` command with the following
flags:
todo
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# User-Facing Changes
The parser now errors on more invalid command signatures:
```nushell
# expected parameter or flag
def foo [ bar: int: ] {}
# expected type
def foo [ bar: = ] {}
def foo [ bar: ] {}
# expected default value
def foo [ bar = ] {}
```
A more involved solution to the issue pointed out
[here](https://github.com/nushell/nushell/pull/14337#issuecomment-2480392373)
# Description
With `--to-table`
- cell-path groupers are used to create column names, similar to
`select`
- closure groupers result in columns named `closure_{i}` where `i` is
the index of argument, with regards to other closures i.e. first closure
grouper results in a column named `closure_0`
Previously
- `group-by foo {...} {...}` => `table<foo, group1, group2, items>`
- `group-by {...} foo {...}` => `table<group0, foo, group2, items>`
With this PR
- `group-by foo {...} {...}` => `table<foo, closure_0, closure_1,
items>`
- `group-by {...} foo {...}` => `table<closure_0, foo, closure_1,
items>`
- no grouper argument results in a `table<group, items>` as previously
On naming conflicts caused by cell-path groupers named `items` or
`closure_{i}`, an error is thrown, suggesting to use a closure in place
of a cell-path.
```nushell
❯ ls | rename items | group-by items --to-table
Error: × grouper arguments can't be named `items`
╭─[entry #3:1:29]
1 │ ls | rename items | group-by items --to-table
· ────────┬────────
· ╰── contains `items`
╰────
help: instead of a cell-path, try using a closure
```
And following the suggestion:
```nushell
❯ ls | rename items | group-by { get items } --to-table
╭─#──┬──────closure_0──────┬───────────────────────────items────────────────────────────╮
│ 0 │ CITATION.cff │ ╭─#─┬────items─────┬─type─┬─size──┬───modified───╮ │
│ │ │ │ 0 │ CITATION.cff │ file │ 812 B │ 3 months ago │ │
│ │ │ ╰─#─┴────items─────┴─type─┴─size──┴───modified───╯ │
│ 1 │ CODE_OF_CONDUCT.md │ ╭─#─┬───────items────────┬─type─┬──size───┬───modified───╮ │
...
```
# Description
In certain situations, we had ansi bleed on the right prompt. This PR
fixes that by prefixing the right prompt with an ansi reset `\x1b[0m`.
This PR also adds some --log-level warn logging so we can see the ansi
escapes that form the prompts.
Closes https://github.com/nushell/nushell/issues/14268
# Description - fixes#14174
This PR addresses a bug in the `seq char` command where the command's
behavior did not align with its help description, which stated that it
prints a sequence of ASCII characters. The initial implementation only
allowed alphabetic characters, leading to user confusion when
non-alphabetic characters (e.g., digits, punctuation) were rejected or
when unexpected behavior occurred for certain input ranges.
### Changes Made:
- **Updated the input validation**: Modified the `is_single_character`
function to accept any ASCII character instead of restricting to
alphabetic characters.
- **Enhanced error messages**: Clarified error messages to specify that
any single ASCII character is acceptable.
- **Expanded functionality**: Ensured that the command can now generate
sequences that include non-alphabetic ASCII characters.
- **Updated tests**: Added tests to cover new use cases involving
non-alphabetic characters and improved validation.
### Examples After Fix:
- `seq char '0' '9'` now outputs `['0', '1', '2', '3', '4', '5', '6',
'7', '8', '9']`
- `seq char ' ' '/'` outputs a list of characters from space to `/`
- `seq char 'A' 'z'` correctly includes alphabetic and non-alphabetic
characters between `A` and `z`
# User-Facing Changes
- Users can now input any single ASCII character for the `start` and
`end` parameters of `seq char`.
- The output will accurately include all characters within the specified
ASCII range, including digits and punctuation.
# Tests + Formatting
- Added new tests to ensure the `seq char` command supports sequences
including non-alphabetic ASCII characters.
Trying to reduce lint allows either by checking if they are former false
positives or by fixing the underlying warning.
- **Remove dead `allow(dead_code)`**
- **Remove recursive dead code**
- **Remove dead code**
- **Move test only functions to test module**
The unit tests that use them, themselves are somewhat sus in that they
mock the usage and not test specificly used methods of the
implementation, so there is a risk for divergence
- **Remove `clippy::uninit_vec` allow.**
May have been a false positive, or the impl has changed somewhat.
We certainly want to look at the unsafe code here to vet for
correctness.
# Description
This PR tries to correct the problem of nushell scripts being made
executable on Windows systems. In order to do this, these steps need to
take place.
1. `assoc .nu=nuscript`
2. `ftype nuscript=C:\path\to\nu.exe '%1' %*`
3. modify the env var PATHEXT by appending `;.NU` at the end
Once those steps are done and this PR is landed, one should be able to
create a script such as this.
```nushell
❯ open im_exe.nu
def main [arg] {
print $"Hello ($arg)!"
}
```
Then they should be able to do this to run the nushell script.
```nushell
❯ im_exe Nushell
Hello Nushell!
```
Under-the-hood, nushell is shelling out to cmd.exe in order to run the
nushell script.
# User-Facing Changes
closes#13020
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Release Notes Excerpt
* Hooks now default to an empty value of the proper type (e.g., `[]` or
`{}`) when not otherwise specified
# Description
```nushell
# Start with no config
nu -n
# Populate with defaults
$env.config = {}
$env.config.hooks
```
* Before: All hooks other than `display_output` were set to `null`.
Attempting to append a hook using `++=` would fail unless it had already
been assigned.
* After:
* `pre_prompt`, `pre_execution`, and `command_not_found` are set to
empty lists. This allows the user to simply append new hooks using
`++=`.
* `env_change` is set to an empty record. This allows the user to add
new hooks using `merge`, although a "helper" command would still be
useful (TODO: stdlib).
Also fixed a typo in an error message.
# User-Facing Changes
There shouldn't be any breaking changes since (before) there were no
guarantees of the hook's value/type. Previously, users would have to
check for `null` and `default` to an empty list before appending. Any
user-strategies for dealing with the problem should continue to work
after this change.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Note that, for reasons I cannot ascertain, this PR appears to have
*fixed* the `command_not_found_error_recognizes_non_executable_file`
test that was previously broken by #12953. That PR essentially rewrote
the test to match the new behavior, but it no longer tested what it was
intended to test.
Now, the test is working again as designed (and as it works in the
REPL).
# After Submitting
This will be covered in the Configuration update for #14249. This PR
will simplify several examples in the doc.
Adds support for converting from polars decimal type to nushell values.
This fix works by first converting a polars decimal series to an f64
series, then converting to Value::Float
Co-authored-by: Jack Wright <jack.wright@nike.com>
# Description
Removes the `NU_DISABLE_IR` option and some code related to evaluating
blocks with the AST
evaluator.
Does not entirely remove the AST evaluator yet. We still have some
dependencies on expression
evaluation in a few minor places which will take a little bit of effort
to fix.
Also changes `debug profile` to always include instructions, because the
output is a little
confusing otherwise, and removes the different options for
instructions/exprs.
# User-Facing Changes
- `NU_DISABLE_IR` no longer has any effect, and is removed. There is no
way to use the AST
evaluator.
- `debug profile` no longer has `--exprs`, `--instructions` options.
- `debug profile` lists `pc` and `instruction` columns by default now.
# Tests + Formatting
Eval tests fixed to only use IR.
# After Submitting
- [ ] release notes
- [ ] finish removing AST evaluator, come up with solutions for the
expression evaluation.
Fixes#14265
# User-Facing Changes
`ls` without a path argument now errors when the current working
directory is unreadable due to missing permissions:
```diff
mkdir foo
chmod 100 foo
cd foo
ls | to nuon
-[]
+Error: × Permission denied
```
Fixes#13267
As we can see from the bisect done in the comments.
Bisected to https://github.com/nushell/nushell/pull/12625 /
460a1c8f87
We can see that this update brought the use of `read_dir` and for it, it
is mentioned in the [rust
docs](https://doc.rust-lang.org/std/fs/fn.read_dir.html#platform-specific-behavior)
that it does **not** provide any specific order of files.
As was the advice there, I went and applied a manual `sort` to the
entries and tested it manually on my local machine.
If required I could probably try and add tests for the order
consistency, would need some time to find my way around them, so I'm
sending the PR first.
# Description
`test_iteration_errors` no longer requires `/root` to exist:
```
failures:
---- test::test_iteration_errors stdout ----
thread 'test::test_iteration_errors' panicked at crates/nu-glob/src/li
b.rs:1151:13:
assertion failed: next.is_some()
```
`/root` is an optional home directory in the [File Hierarchy
Standard][1].
I encountered this while running the tests in a `guix shell` container,
which doesn't include a root user.
[1]: https://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch03s14.html
# User-Facing Changes
None
# Description
Fixes#14294 - Turned out to be a whole lot easier than I expected, but
please double-check me on this, since it's an area I haven't been in
before.
# User-Facing Changes
Allow date to be added to a duration type.
# Tests + Formatting
Tests added:
* Duration + Date is allowed
* Duration - Date is not allowed
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Downgrade `softprops/action-gh-release` to 2.0.5 to fix the release per
asset mess.
It works in https://github.com/nushell/nushell/actions/runs/11809766842
with the release draft:
https://github.com/nushell/nushell/releases/tag/untagged-c055298a78ddb780bd01,
more detail could be found here:
https://github.com/softprops/action-gh-release/issues/445
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Bump version to `0.100.0`
# User-Facing Changes
The new release `v0.100.0` is coming...
# Description
In #14291, I misunderstood the use-case for `into binary` with `http
post`. Thanks again to @weirdan for steering me straight on that. This
reverts the example that I changed and adds a new one for uploading text
files.
# User-Facing Changes
Doc-only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fixes test which was ignored in #14297. Also fixes related example.
Tests now use local timezone to match actual result.
More discussion in #14266
# User-Facing Changes
Tests-only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Since the human-date-parser was switched to use the users local
timezone, this test may not be needed anymore. I've just ignored it for
now and put a comment about why it's being ignored.
There are more discussions on this topic here
https://github.com/nushell/nushell/pull/14266
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Thanks to @weirdan [in
Discord](https://discord.com/channels/601130461678272522/614593951969574961/1304508148207583345)
for pointing out that correct syntax for `http post --content-type
multipart/form-data`.
The existing example was incomplete, so I've updated it.
# User-Facing Changes
Doc-only
# Tests + Formatting
`toolkit test` currently seems to be broken, so relying on CI
# After Submitting
N/A
# Description
This PR updates reedline to the latest commit. 7a1b344a.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #14110Fixes: #14087
I think it's ok to not generating instruction to `def` and `export def`
call. Because they just return `PipelineData::Empty` without doing
anything.
If nushell generates instructions for `def` and `export def`, nushell
will try to capture variables for these block. It's not the time to do
this.
# User-Facing Changes
```
nu -c "
def bar [] {
let x = 1
($x | foo)
}
def foo [] {
foo
}
"
```
Will no longer raise error.
# Tests + Formatting
Added 4 tests
# Description
This PR fixes a problem where not equal in polars wasn't working with
strings.
## Before
```nushell
let a = ls | polars into-df
$a.type != "dir"
Error: nu:🐚:type_mismatch
× Type mismatch during operation.
╭─[entry #16:1:1]
1 │ $a.type != "dir"
· ─┬ ─┬ ──┬──
· │ │ ╰── string
· │ ╰── type mismatch for operator
· ╰── NuDataFrame
╰────
```
## After
```nushell
let a = ls | polars into-df
$a.type != "dir"
╭──#──┬─type──╮
│ 0 │ false │
│ 1 │ false │
│ 2 │ false │
...
```
/cc @ayax79 to make sure I did this right.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fixes#13776
# User-Facing Changes
Arguments to aliased externals no longer include nested import paths:
```diff
module foo { export alias bar = ^echo }
use foo
foo bar baz
-bar baz
+baz
```
# User-Facing Changes
Table literal arguments to list parameters are now correctly parsed:
```diff
def a [l: list<any>] { $l | to nuon }; a [[a]; [2]]
-[[a]]
+[[a]; [2]]
```
Addresses the following points from #14162
> - There is no built-in counterpart to url build-query for splitting a
query string
There is `from url`, which, due to naming, is a little hard to discover
and suffers from the following point
> - url parse can create records with duplicate keys
> - url parse's params should either:
> - ~group the same keys into a list.~
> - instead of a record, be a key-value table. (table<key: string,
value: string>)
# Description
## `url split-query`
Counterpart to `url build-query`, splits a url encoded query string to
key value pairs, represented as `table<key: string, value: string>`
```
> "a=one&a=two&b=three" | url split-query
╭───┬─────┬───────╮
│ # │ key │ value │
├───┼─────┼───────┤
│ 0 │ a │ one │
│ 1 │ a │ two │
│ 2 │ b │ three │
╰───┴─────┴───────╯
```
## `url parse`
The output's `param` field is now a table as well, mirroring the new
`url split-query`
```
> 'http://localhost?a=one&a=two&b=three' | url parse
╭──────────┬─────────────────────╮
│ scheme │ http │
│ username │ │
│ password │ │
│ host │ localhost │
│ port │ │
│ path │ / │
│ query │ a=one&a=two&b=three │
│ fragment │ │
│ │ ╭───┬─────┬───────╮ │
│ params │ │ # │ key │ value │ │
│ │ ├───┼─────┼───────┤ │
│ │ │ 0 │ a │ one │ │
│ │ │ 1 │ a │ two │ │
│ │ │ 2 │ b │ three │ │
│ │ ╰───┴─────┴───────╯ │
╰──────────┴─────────────────────╯
```
# User-Facing Changes
- `url parse`'s output has the mentioned change, which is backwards
incompatible.
# Description
This PR tries to fix https://github.com/nushell/nushell/issues/14195 by
setting the local time and timezone after conversion without changing
the time.
### Before
```nushell
❯ 'in 10 minutes' | into datetime
Tue, 5 Nov 2024 12:59:58 -0600 (in 9 minutes)
❯ 'yesterday' | into datetime
Sun, 3 Nov 2024 18:00:00 -0600 (2 days ago)
❯ 'tomorrow' | into datetime
Tue, 5 Nov 2024 18:00:00 -0600 (in 5 hours)
❯ 'today' | into datetime
Mon, 4 Nov 2024 18:00:00 -0600 (18 hours ago)
```
### After (these are correct)
```nushell
❯ 'in 10 minutes' | into datetime
Tue, 5 Nov 2024 12:58:44 -0600 (in 9 minutes)
❯ 'yesterday' | into datetime
Mon, 4 Nov 2024 12:49:04 -0600 (a day ago)
❯ 'tomorrow' | into datetime
Wed, 6 Nov 2024 12:49:20 -0600 (in a day)
❯ 'today' | into datetime
Tue, 5 Nov 2024 12:52:06 -0600 (now)
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.26.8 to
1.27.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.27.0</h2>
<h2>[1.27.0] - 2024-11-01</h2>
<h3>Features</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1106">October
2024</a> changes</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.27.0] - 2024-11-01</h2>
<h3>Features</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1106">October
2024</a> changes</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d01f29c66d"><code>d01f29c</code></a>
chore: Release</li>
<li><a
href="52e950bb13"><code>52e950b</code></a>
chore: Release</li>
<li><a
href="19cfc03ea4"><code>19cfc03</code></a>
docs: Update changelog</li>
<li><a
href="f80b1564bd"><code>f80b156</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1140">#1140</a>
from epage/oct</li>
<li><a
href="6b5c8079a9"><code>6b5c807</code></a>
feat(dict): Oct updates</li>
<li><a
href="d64f202a88"><code>d64f202</code></a>
chore(deps): Update compatible (<a
href="https://redirect.github.com/crate-ci/typos/issues/1137">#1137</a>)</li>
<li><a
href="e903c46287"><code>e903c46</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1136">#1136</a>
from PigeonF/PigeonF/push-mlqnlvmswwmp</li>
<li><a
href="b994765ef9"><code>b994765</code></a>
chore: Fix typo "potemtial" -> "potential"</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.26.8...v1.27.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Wind <WindSoilder@outlook.com>
Bumps [notify-debouncer-full](https://github.com/notify-rs/notify) from
0.3.1 to 0.3.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/notify-rs/notify/releases">notify-debouncer-full's
releases</a>.</em></p>
<blockquote>
<h2>debouncer-full-0.3.2</h2>
<h2>What's Changed</h2>
<ul>
<li>FIX: ordering of debounced events could lead to a panic with Rust
1.81.0 and above by <a
href="https://github.com/dfaust"><code>@dfaust</code></a> in <a
href="https://redirect.github.com/notify-rs/notify/pull/643">notify-rs/notify#643</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/notify-rs/notify/compare/debouncer-full-0.3.1...debouncer-full-0.3.2">https://github.com/notify-rs/notify/compare/debouncer-full-0.3.1...debouncer-full-0.3.2</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/notify-rs/notify/blob/main/CHANGELOG.md">notify-debouncer-full's
changelog</a>.</em></p>
<blockquote>
<h2>debouncer-full 0.3.2 (2024-09-29)</h2>
<ul>
<li>FIX: ordering of debounced events could lead to a panic with Rust
1.81.0 and above <a
href="https://redirect.github.com/notify-rs/notify/issues/636">#636</a></li>
</ul>
<p><a
href="https://redirect.github.com/notify-rs/notify/issues/636">#636</a>:
<a
href="https://redirect.github.com/notify-rs/notify/issues/636">notify-rs/notify#636</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="2bef540ff4"><code>2bef540</code></a>
Merge pull request <a
href="https://redirect.github.com/notify-rs/notify/issues/643">#643</a>
from dfaust/release-debouncer-full-0.3.2</li>
<li><a
href="ef8bc72b4b"><code>ef8bc72</code></a>
Fix debouncer-full version number and prepare release</li>
<li><a
href="3606af8005"><code>3606af8</code></a>
Fix compatibility with MSRV 1.60</li>
<li><a
href="f5c47023a6"><code>f5c4702</code></a>
Improve <code>sort_events</code> performance</li>
<li><a
href="8f809f7197"><code>8f809f7</code></a>
Fix ordering of debounced events</li>
<li>See full diff in <a
href="https://github.com/notify-rs/notify/compare/debouncer-full-0.3.1...debouncer-full-0.3.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Follow-up to #13842. In that commit, using one of the `dirs`/`shells`
aliases would notify the user that it would no longer be autoloaded in
future releases. This is the removal stage.
Side-benefit: Additional 1ms+ load time improvement
# User-Facing Changes
Breaking-change - `dirs` aliases are no longer autoloaded.
Users can either choose to continue using the aliases by adding the
following to the startup:
```nu
use std/dirs shells-aliases *
```
Alternatively, users can use the `dirs` subcommands (rather than the
aliases) with:
```nu
use std/dirs
```
# Description
Fixes#14151 where `to text` treats list streams and lists values
differently.
# User-Facing Changes
New line is always added after items in a list or record except for the
last item if the `--no-newline` flag is provided.
# Description
Turns out there are duplicate conversion functions: `as_i64` and
`as_f64`. In most cases, these can be replaced with `as_int` and
`as_float`, respectively.
# Description
Fixes: https://github.com/nushell/nushell/issues/13425
It's just a follow up to #13958.
User input can be a directory, in this case, we need to use the return
value of `find_in_dirs_env` carefully, so in case, I renamed
maybe_file_path to maybe_file_path_or_dir to emphasize it.
# User-Facing Changes
`$env.FILE_PWD` and `$env.CURRENT_FILE` will be more reliable to use.
# Tests + Formatting
Added 2 tests
With #14083 a dependency on `test-case` was introduced, we already
depend on the more exp(a/e)nsive `rstest` for our macro-based test case
generation (with fixtures on top)
To save on some compilation for proc macros unify to `rstest`
# Description
Dividing two ints can currently return either an int or a float. Not
having a single return type for an operation between two types seems
problematic. Additionally, the type signature for division says that
dividing two ints returns only an int which does not match the current
implementation (it can also return a float). This PR changes division
between almost all types to return a float (except for `filesize /
number` or `duration / number`, since there are no float representations
for these types).
Currently, floor division between certain types is not implemented even
though the type signature allows it. Also, the current implementation of
floor division uses a combination of clamping and flooring rather than
simply performing floor division which this PR fixes. Additionally, the
signature was changed so that `int // float`, `float // int`, and `float
// float` now return float instead of int. This matches the automatic
float promotion in the rest of the operators (as well as how Python does
floor division which I think is the original inspiration).
Since regular division has always returned fractional values (and now
returns a float to reflect that), `mod` is now defined in terms of floor
division. That is, `D // d = q`, `D mod d = r`, and `D = d * q + r `.
This is just like the `%` operator in Python, which is also based off
floor division (at least for ints and floats). Additionally,
implementations missing from `mod`'s current type signature have been
added (`duration mod int` and `duration mod float`).
This PR also overhauls the overflow checking and errors for div, mod,
and floor div. If an operation overflows, it will now cause an error.
# User-Facing Changes
- Div now returns a float in most cases.
- Floor division now actually does floor division.
- Floor division now does automatic float promotion, returning a float
in more instances.
- Floor division now actually allows division with filesize and
durations as its type signature claimed.
- Mod is now defined and implemented in terms of floor division rather
than truncating division.
- Mod now actually allows filesize and durations as its type signature
claimed.
- Div, mod, and floor div now all have proper overflow checks.
## Examples
When the divisor and the dividend have the same sign, the quotient and
remainder will be the same as before. (Except that this PR will give
more accurate results, since it does not do an intermediate float
conversion). If the signs of the divisor and dividend are different,
then the results will be different, or rather actually correct.
Before:
```nu
let q = 8 // -3 # -3
let r = 8 mod -3 # 2
8 == $q * -3 + $r # false
```
After:
```nu
let q = 8 // -3 # -3
let r = 8 mod -3 # -1
8 == $q * -3 + $r # true
```
Before:
```nu
let q = -8 // 3 # -3
let r = -8 mod 3 # -2
-8 == $q * 3 + $r # false
```
After:
```nu
let q = -8 // 3 # -3
let r = -8 mod 3 # 1
-8 == $q * 3 + $r # true
```
# Tests + Formatting
Added a few tests.
# After Submitting
Probably update the docs.
Fixes#14145
# User-Facing Changes
An empty rest match would be `null` previously. Now it will be an empty
list.
This is a breaking change for any scripts relying on the old behavior.
Example script:
```nu
match [1] {
[_ ..$rest] => {
match $rest {
null => { "old" }
[] => { "new" }
}
}
}
```
This expression would evaluate to "old" on current nu versions and "new"
with this patch.
# Description
Fixes#14222. The ability to set duration unit for `--max-time` when using the `http`
command util.
Signed-off-by: Alex Johnson <alex.kattathra.johnson@gmail.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds --no-deref flag to `touch`. Nice and backwards compatible, and I
get to touch symlinks. I still don't get to set their dates directly,
but maybe that'll come with utouch.
Some sadness in the implementation, since `set_symlink_file_times`
doesn't take Option values and we call it twice with the old "read"
values from reference (or now, if missing). This shouldn't be a big
concern since `touch` already did two calls if you set both mtime and
atime. Also, `--no-deref` applies both to the reference file, and to the
target file. No splitting them up, because that's silly.
Can always bikeshed. I nicked `--no-deref` from the uutils flag, and
made the short flag `-d` because it obviously can't be `-h`. I thought
of `-S` like in `glob`, for the "negative/filter out" uppercase short
letters. Ultimately I don't think it matters much.
Should fix#14212 since it's not really tied to uutils, besides the
comment about setting a `datetime` value directly.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New flag.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Maybe.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes: #13362
This PR fixes the `Display` impl for `CellPath`, as laid out in #13362
and #14090:
```nushell
> $.0."0"
$.0."0"
> $."foo.bar".baz
$."foo.bar".baz
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Cell-paths are now printed using the same `$.` notation that is used to
create them, and ambiguous column names are properly quoted.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #14202
After looking into the issue, I think #13910 it's not good to cut the
span if it's in external argument.
This pr is somehow revert the change, and fix
https://github.com/nushell/nushell/issues/13431 in another way.
It introduce a new state named `State::BackTickQuote`, so if an external
arg include backtick quote, it enters the state, so backtick quote won't
be the body of a string.
# User-Facing Changes
### Before
```nushell
> ^echo `(echo aa)`
aa
> ^echo `"aa"` # maybe it's not right to remove the inner quote.
aa
```
### After
```nushell
> ^echo `(echo aa)`
(echo aa)
> ^echo `"aa"` # inner quote is keeped if there are backtick quote outside.
"aa"
```
# Tests + Formatting
Added 3 tests.
Bumps [chrono-tz](https://github.com/chronotope/chrono-tz) from 0.8.6 to
0.10.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/chronotope/chrono-tz/releases">chrono-tz's
releases</a>.</em></p>
<blockquote>
<h2>chrono-tz v0.10.0: 2024b</h2>
<p><strong>TZDB</strong> version 2024b (2024-09-05).</p>
<h2>Changes</h2>
<ul>
<li>Make <code>OffsetName::abbreviation</code> return an
<code>Option</code>.
This reflects that numeric values such as <code>+11</code> are no longer
encoded in the upstream TZDB as abbreviations (<a
href="https://redirect.github.com/chronotope/chrono-tz/issues/185">#185</a>).</li>
</ul>
<h2>TZDB 2024b</h2>
<blockquote>
<p>The 2024b release of the tz code and data is available.</p>
<p>This release is prompted by the accumulated weight of many non-urgent
changes to both code and data. It changes one timestamp abbreviation,
for the long-obsolete System V setting TZ='MET'; see below. Otherwise,
the timestamps affected by this release all predate April 2008, so you
can skip this release if your application uses only tzdata and does not
use older timestamps.</p>
<p>This release contains the following changes:</p>
<h3>Briefly:</h3>
<p>Improve historical data for Mexico, Mongolia, and Portugal.
System V names are now obsolescent.
The main data form now uses %z.
The code now conforms to RFC 8536 for early timestamps.
Support POSIX.1-2024, which removes asctime_r and ctime_r.
Assume POSIX.2-1992 or later for shell scripts.
SUPPORT_C89 now defaults to 1.</p>
<h3>Changes to past timestamps</h3>
<p>Asia/Choibalsan is now an alias for Asia/Ulaanbaatar rather than
being a separate Zone with differing behavior before April 2008. This
seems better given our wildly conflicting information about Mongolia's
time zone history. (Thanks to Heitor David Pinto.)</p>
<p>Historical transitions for Mexico have been updated based on official
Mexican decrees. The affected timestamps occur during the years
1921-1927, 1931, 1945, 1949-1970, and 1981-1997. The affected zones are
America/Bahia_Banderas, America/Cancun, America/Chihuahua,
America/Ciudad_Juarez, America/Hermosillo, America/Mazatlan,
America/Merida, America/Mexico_City, America/Monterrey, America/Ojinaga,
and America/Tijuana. (Thanks to Heitor David Pinto.)</p>
<p>Historical transitions for Portugal, represented by Europe/Lisbon,
Atlantic/Azores, and Atlantic/Madeira, have been updated based on a
close reading of old Portuguese legislation, replacing previous data
mainly originating from Whitman and Shanks & Pottenger. These
changes affect a few transitions in 1917-1921, 1924, and 1940 throughout
these regions by a few hours or days, and various timestamps between
1977 and 1993 depending on the region. In particular, the Azores and
Madeira did not observe DST from 1977 to 1981. Additionally, the
adoption of standard zonal time in former Portuguese colonies have been
adjusted: Africa/Maputo in 1909, and Asia/Dili by 22 minutes at the
start of 1912. (Thanks to Tim Parenti.)</p>
<h3>Changes to past tm_isdst flags</h3>
<p>The period from 1966-04-03 through 1966-10-02 in Portugal is now
modeled as DST, to more closely reflect how contemporaneous changes in
law entered into force.</p>
<h3>Changes to data</h3>
<p>Names present only for compatibility with UNIX System V (last
released in the 1990s) have been moved to 'backward'. These names, which
for post-1970 timestamps mostly just duplicate data of geographical
names, were confusing downstream uses. Names moved to 'backward' are now
links to geographical names. This affects behavior for TZ='EET' for some
pre-1981 timestamps, for TZ='CET' for some pre-1947 timestamps, and for
TZ='WET' for some pre-1996 timestamps. Also, TZ='MET' now behaves like
TZ='CET' and so uses the abbreviation "CET" rather than
"MET". Those needing the previous TZDB behavior, which does
not match any real-world clocks, can find the old entries in 'backzone'.
(Problem reported by Justin Grant.)</p>
<p>The main source files' time zone abbreviations now use %z, supported
by zic since release 2015f and used in vanguard form since release
2022b. For example, America/Sao_Paulo now contains the zone continuation
line "-3:00 Brazil %z", which is less error prone than the old
"-3:00 Brazil -03/-02". This does not change the represented
data: the generated TZif files are unchanged. Rearguard form still
avoids %z, to support obsolescent parsers.</p>
<p>Asia/Almaty has been removed from zonenow.tab as it now agrees with
Asia/Tashkent for future timestamps, due to Kazakhstan's 2024-02-29 time
zone change. Similarly, America/Scoresbysund has been removed, as it now
agrees with America/Nuuk due to its 2024-03-31 time zone change.</p>
</blockquote>
<h2>chrono-tz v0.9.0: 2024a</h2>
<p><strong>TZDB</strong> version <a
href="https://mm.icann.org/pipermail/tz-announce/2024-February/000081.html">2024a</a>
(2024-02-01).</p>
<h2>Changes</h2>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8450e59393"><code>8450e59</code></a>
Bump chrono-tz-build to 0.4.0</li>
<li><a
href="6154fd2513"><code>6154fd2</code></a>
Bump version number to 0.10.0</li>
<li><a
href="2d0c489781"><code>2d0c489</code></a>
Update tz submodule to 2024b</li>
<li><a
href="0acd431a54"><code>0acd431</code></a>
Make timezone name optional</li>
<li><a
href="2e955104a8"><code>2e95510</code></a>
Test numeric time zone names</li>
<li><a
href="2a675e2f84"><code>2a675e2</code></a>
chrono-tz-build: resolve fixme</li>
<li><a
href="ca52db80b5"><code>ca52db8</code></a>
chrono-tz-build: make phf gated by case-insensitive feature</li>
<li><a
href="e2f4215139"><code>e2f4215</code></a>
Prepare parse-zoneinfo v0.3.1</li>
<li><a
href="e6f87e20cc"><code>e6f87e2</code></a>
Symlink LICENSE in parse-zoneinfo</li>
<li><a
href="6e58ce21ca"><code>6e58ce2</code></a>
Remove <code>AsciiExt</code> import</li>
<li>Additional commits viewable in <a
href="https://github.com/chronotope/chrono-tz/compare/v0.8.6...v0.10.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Add `RELEASE_QUERY_API` build arg for all Dockerfiles, with default
value set to
`https://api.github.com/repos/nushell/nushell/releases/latest`, So that
we can build the nightly images with the same Dockerfile but a different
`RELEASE_QUERY_API` build arg.
A nightly image build with the new Dockerfile could be found here:
https://github.com/orgs/nushell/packages/container/nushell/297473460?tag=nightly
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
The default behavior keep the same as before
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Those who want to build a docker image with the nushell nightly release
installed could run:
```nu
let queryApi = http get https://api.github.com/repos/nushell/nightly/releases | sort-by -r created_at | get 0.url
docker buildx build --build-arg $'RELEASE_QUERY_API=($queryApi)' ...
```
I feel like the limitations on what can be bound are too strict.
if an app _does_ support the Kitty keyboard protocol (Neovim,
Reedline), I can map the function keys (F27-F35 as listed below).
In Reedline everything works perfectly. The issue is for some reason we
limit the keys that can be bound in Nushell, so I am unable to do that.
Bumps [trash](https://github.com/ArturKovacs/trash) from 5.1.1 to 5.2.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/ArturKovacs/trash/releases">trash's
releases</a>.</em></p>
<blockquote>
<h2>v5.2.0</h2>
<h3>New Features</h3>
<ul>
<li>
<p>Short circuiting check for empty trash
<code>is_empty()</code> is a short circuiting function that checks if
the trash is
empty on Freedesktop compatible systems and Windows.</p>
<p>The main purpose of <code>is_empty()</code> is to avoid evaluating
the entire trash
context when the caller is only interested in whether the trash is empty
or not. This is especially useful for full trashes with many items.</p>
</li>
</ul>
<h3>Commit Statistics</h3>
<ul>
<li>2 commits contributed to the release.</li>
<li>56 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge pull request <a
href="https://redirect.github.com/ArturKovacs/trash/issues/120">#120</a>
from joshuamegnauth54/feat-short-circuiting-is-empty (0120bbe)</li>
<li>Short circuiting check for empty trash (6d59fa9)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Byron/trash-rs/blob/master/CHANGELOG.md">trash's
changelog</a>.</em></p>
<blockquote>
<h2>5.2.0 (2024-10-26)</h2>
<h3>New Features</h3>
<ul>
<li>
<p><!-- raw HTML omitted --> Short circuiting check for empty trash
<code>is_empty()</code> is a short circuiting function that checks if
the trash is
empty on Freedesktop compatible systems and Windows.</p>
<p>The main purpose of <code>is_empty()</code> is to avoid evaluating
the entire trash
context when the caller is only interested in whether the trash is empty
or not. This is especially useful for full trashes with many items.</p>
</li>
</ul>
<h3>Commit Statistics</h3>
<!-- raw HTML omitted -->
<ul>
<li>2 commits contributed to the release.</li>
<li>56 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge pull request <a
href="https://redirect.github.com/ArturKovacs/trash/issues/120">#120</a>
from joshuamegnauth54/feat-short-circuiting-is-empty (<a
href="0120bbe668"><code>0120bbe</code></a>)</li>
<li>Short circuiting check for empty trash (<a
href="6d59fa9394"><code>6d59fa9</code></a>)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="1a0fc5908a"><code>1a0fc59</code></a>
Release trash v5.2.0</li>
<li><a
href="0120bbe668"><code>0120bbe</code></a>
Merge pull request <a
href="https://redirect.github.com/ArturKovacs/trash/issues/120">#120</a>
from joshuamegnauth54/feat-short-circuiting-is-empty</li>
<li><a
href="6d59fa9394"><code>6d59fa9</code></a>
feat: Short circuiting check for empty trash</li>
<li>See full diff in <a
href="https://github.com/ArturKovacs/trash/compare/v5.1.1...v5.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [fancy-regex](https://github.com/fancy-regex/fancy-regex) from
0.13.0 to 0.14.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/fancy-regex/fancy-regex/releases">fancy-regex's
releases</a>.</em></p>
<blockquote>
<h2>0.14.0</h2>
<h3>Added</h3>
<ul>
<li>Add <code>split</code>, <code>splitn</code> methods to
<code>Regex</code> to split a string into substrings (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/140">#140</a>)</li>
<li>Add <code>case_insensitive</code> method to
<code>RegexBuilder</code> to force case-insensitive mode (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/132">#132</a>)</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Bump bit-set dependency to 0.8 (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/139">#139</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/fancy-regex/fancy-regex/blob/main/CHANGELOG.md">fancy-regex's
changelog</a>.</em></p>
<blockquote>
<h2>[0.14.0] - 2024-10-24</h2>
<h3>Added</h3>
<ul>
<li>Add <code>split</code>, <code>splitn</code> methods to
<code>Regex</code> to split a string into substrings (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/140">#140</a>)</li>
<li>Add <code>case_insensitive</code> method to
<code>RegexBuilder</code> to force case-insensitive mode (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/132">#132</a>)</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Bump bit-set dependency to 0.8 (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/139">#139</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="810a8f3c16"><code>810a8f3</code></a>
Version 0.14.0</li>
<li><a
href="33597bdd7b"><code>33597bd</code></a>
Merge pull request <a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/145">#145</a>
from fancy-regex/bump-tarpaulin</li>
<li><a
href="1a6c0f813d"><code>1a6c0f8</code></a>
Bump tarpaulin</li>
<li><a
href="2f0f000de9"><code>2f0f000</code></a>
Merge pull request <a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/144">#144</a>
from k94-ishi/dev/splitn</li>
<li><a
href="689a845112"><code>689a845</code></a>
Merge pull request <a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/132">#132</a>
from jonperry-dev/casing_option</li>
<li><a
href="f0183b46a6"><code>f0183b4</code></a>
fix check</li>
<li><a
href="988b357493"><code>988b357</code></a>
fmt</li>
<li><a
href="52105243c1"><code>5210524</code></a>
moved tests to tests/regex_options.rs</li>
<li><a
href="ce4ab06ee3"><code>ce4ab06</code></a>
fmt</li>
<li><a
href="1039f71083"><code>1039f71</code></a>
added self to authors</li>
<li>Additional commits viewable in <a
href="https://github.com/fancy-regex/fancy-regex/compare/0.13.0...0.14.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [unicase](https://github.com/seanmonstar/unicase) from 2.7.0 to
2.8.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d98191176d"><code>d981911</code></a>
v2.8.0</li>
<li><a
href="b825f9ed9f"><code>b825f9e</code></a>
upgrade to unicode 16</li>
<li><a
href="a86a4669aa"><code>a86a466</code></a>
update to 2018 edition</li>
<li><a
href="8dc84ec6f1"><code>8dc84ec</code></a>
Make license metadata SPDX compliant</li>
<li><a
href="07f81c14cd"><code>07f81c1</code></a>
feat: add to_folded_case() method</li>
<li>See full diff in <a
href="https://github.com/seanmonstar/unicase/compare/v2.7.0...v2.8.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.26.0 to
1.26.8.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.26.8</h2>
<h2>[1.26.8] - 2024-10-24</h2>
<h2>v1.26.3</h2>
<h2>[1.26.3] - 2024-10-24</h2>
<h3>Fixes</h3>
<ul>
<li>Accept <code>additionals</code></li>
</ul>
<h2>v1.26.2</h2>
<h2>[1.26.2] - 2024-10-24</h2>
<h3>Fixes</h3>
<ul>
<li>Accept <code>tesselate</code> variants</li>
</ul>
<h2>v1.26.1</h2>
<h2>[1.26.1] - 2024-10-23</h2>
<h3>Fixes</h3>
<ul>
<li>Respect <code>--force-exclude</code> for binary files</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.26.8] - 2024-10-24</h2>
<h2>[1.26.7] - 2024-10-24</h2>
<h2>[1.26.6] - 2024-10-24</h2>
<h2>[1.26.5] - 2024-10-24</h2>
<h2>[1.26.4] - 2024-10-24</h2>
<h2>[1.26.3] - 2024-10-24</h2>
<h3>Fixes</h3>
<ul>
<li>Accept <code>additionals</code></li>
</ul>
<h2>[1.26.2] - 2024-10-24</h2>
<h3>Fixes</h3>
<ul>
<li>Accept <code>tesselate</code> variants</li>
</ul>
<h2>[1.26.1] - 2024-10-23</h2>
<h3>Fixes</h3>
<ul>
<li>Respect <code>--force-exclude</code> for binary files</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="0d9e0c2c1b"><code>0d9e0c2</code></a>
chore: Release</li>
<li><a
href="e5385b07a0"><code>e5385b0</code></a>
chore(ci): Fix new release process</li>
<li><a
href="f08d1171e2"><code>f08d117</code></a>
chore: Release</li>
<li><a
href="e6e172498c"><code>e6e1724</code></a>
chore(ci): Fix new release process</li>
<li><a
href="02afc59fd4"><code>02afc59</code></a>
chore: Release</li>
<li><a
href="f981a1cd20"><code>f981a1c</code></a>
chore(ci): Fix new release process</li>
<li><a
href="afbc96c5d3"><code>afbc96c</code></a>
chore: Release</li>
<li><a
href="d3dcaaeb2d"><code>d3dcaae</code></a>
chore(ci): Fix new release process</li>
<li><a
href="fb8217bd5e"><code>fb8217b</code></a>
chore: Release</li>
<li><a
href="88ea8ea67d"><code>88ea8ea</code></a>
chore(ci): Stage releases until done</li>
<li>Additional commits viewable in <a
href="https://github.com/crate-ci/typos/compare/v1.26.0...v1.26.8">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
A few simple changes:
* Extends the range of previews to include the attributes - Bold,
italic, underline, etc.
* Also resets the colors before *every* preview. Previously we weren't
doing this, so the "string" theme color was bleeding into a few previews
(mostly, if not all, `bg` ones). Now the "default foreground" color is
used for any preview without an explicit foreground color.
* Moves the preview code into the `if use_ansi_coloring` block as a
stupid-nitpick optimization. There's no reason to populate the previews
when they are explicitly not shown with `use_ansi_coloring: false`.
* Moves `reset` to the bottom of the attribute list so that it isn't
previewed. This is a bit of a nitpick as well since internally we send
the same code for both a `reset` and `attr_normal` (which is correct),
but semantically a `reset` doesn't seem like a "previewable" thing,
whereas "normal" text can be demonstrated with a preview.
# User-Facing Changes
`ansi -l` now shows additional previews
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes the `Display` implementation for `CellPath` show a `?`
suffix on every optional entry, which makes the output consistent with
the language syntax.
Before this PR, the printing of cell paths was confusing, e.g. `$.x` and
`$.x?` were both printed as `x`. Now, the second one is printed as `x?`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
The formatting of cell paths now matches the syntax used to create them,
reducing confusion.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
All tests pass, including `stdlib` tests.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes the quoting and escaping of column names in `to nuon`.
Before the PR, column names with quotes inside them would get quoted,
but not escaped:
```nushell
> { 'a"b': 2 } | to nuon
{ "a"b": 2 }
> { 'a"b': 2 } | to nuon | from nuon
Error: × error when loading nuon text
╭─[entry #1:1:27]
1 │ { "a\"b": 2 } | to nuon | from nuon
· ────┬────
· ╰── could not load nuon text
╰────
Error: × error when parsing nuon text
╭─[entry #1:1:27]
1 │ { "a\"b": 2 } | to nuon | from nuon
· ────┬────
· ╰── could not parse nuon text
╰────
Error: × error when parsing
╭────
1 │ {"a"b": 2}
· ┬
· ╰── Unexpected end of code.
╰────
> [['a"b']; [2] [3]] | to nuon
[["a"b"]; [2], [3]]
> [['a"b']; [2] [3]] | to nuon | from nuon
Error: × error when loading nuon text
╭─[entry #1:1:32]
1 │ [['a"b']; [2] [3]] | to nuon | from nuon
· ────┬────
· ╰── could not load nuon text
╰────
Error: × error when parsing nuon text
╭─[entry #1:1:32]
1 │ [['a"b']; [2] [3]] | to nuon | from nuon
· ────┬────
· ╰── could not parse nuon text
╰────
Error: × error when parsing
╭────
1 │ [["a"b"]; [2], [3]]
· ┬
· ╰── Unexpected end of code.
╰────
```
After this PR, the quote is escaped properly:
```nushell
> { 'a"b': 2 } | to nuon
{ "a\"b": 2 }
> { 'a"b': 2 } | to nuon | from nuon
╭─────┬───╮
│ a"b │ 2 │
╰─────┴───╯
> [['a"b']; [2] [3]] | to nuon
[["a\"b"]; [2], [3]]
> [['a"b']; [2] [3]] | to nuon | from nuon
╭─────╮
│ a"b │
├─────┤
│ 2 │
│ 3 │
╰─────╯
```
The cause of the issue was that `to nuon` simply wrapped column names in
`'"'` instead of calling `escape_quote_string`.
As part of this change, I also moved the functions related to quoting
(`needs_quoting` and `escape_quote_string`) into `nu-utils`, since
previously they were defined in very ad-hoc places (and, in the case of
`escape_quote_string`, it was defined multiple times with the same
body!).
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`to nuon` now properly escapes quotes in column names.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
All tests pass, including workspace and stdlib tests.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Add Dockerfile for Debian/Ubuntu images.
Related to #14171 and PR #14191
This is largely similar to the Alpine version, however there are some
minor differences:
- I've specially added Debian Bookworm here to provide some stability
when new major versions are released. We can bump the (LTS only perhaps)
versions supported as needed.
- I moved the creation of the nushell user until later to avoid a
warning about the nu binary not (yet) being available.
- Debian doesn't come with wget or curl. I've added wget to be similar
to Alpine. I tried creating a multi-layer version to avoid installing
wget (reduced attack surface) but the image was bigger due to the extra
layer, so didn't seem worth being different.
I can transfer the relevant changes to the Alpine image if we want to
keep them easily diffable?
# User-Facing Changes
While this provides a Debian image by default. An Ubuntu image can be
created from this by changing to `FROM ubuntu:noble`. We could later
supply that as an optional argument from the build workflow to be able
to build different distros and supported versions.
# Tests + Formatting
The images produced for Debian/Ubuntu are ~75Mb bigger as listed in
`docker images`:
```
REPOSITORY TAG IMAGE ID CREATED SIZE
nu-alpine latest 71c0216eddd9 44 years ago 167MB
nu-debian latest cce3d91fc77c 44 years ago 243MB
nu-ubuntu latest ce90497da806 44 years ago 240MB
```
I've tested a few nu commands, including polars. It seems to work okay.
It makes sense to add some container-based tests once the workflows are
available. I'll probably pick that up later when @hustcer has completed
the migration of his workflows. Perhaps invoking a nushell-based test
suite if one is available. The toolkit seems to rely on cargo and the
source being available, which of course won't work here.
Related to #14181
# Description
Our understanding of `ESC[3J` has apparently been wrong. And I say "our"
because I posted a [Super User
answer](https://superuser.com/a/1738611/1210833) a couple of years ago
with the same misconception (now fixed). In addition, the [crossterm
crate
doc](https://docs.rs/crossterm/latest/crossterm/terminal/enum.ClearType.html)
is wrong on the topic.
`ESC[3J` doesn't clear the screen plus the scrollback; it *only* clears
the scrollback. Reference the official [Xterm Control Sequences
doc](https://www.xfree86.org/4.8.0/ctlseqs.html).
> CSI P s J
>
> Erase in Display (ED)
>
> P s = 0 → Erase Below (default)
> P s = 1 → Erase Above
> P s = 2 → Erase All
> P s = 3 → Erase Saved Lines (xterm)
This also means that:
```nu
$"(ansi clear_entire_screen_plus_buffer)"
```
... doesn't.
This PR updates it to `ansi clear_scrollback_buffer` (short-code remains
the same).
# User-Facing Changes
Breaking-change: `ansi clear_entire_screen_plus_buffer` is renamed `ansi
clear_scrollback_buffer`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Self-documenting command via `ansi -l`
# Description
Makes `join` `right-table` support table literal notation instead of
parsing the column list (treated as empty data):
```diff
[{a: 1}] | join [[a]; [1]] a | to nuon
-[]
+[[a]; [1]]
```
Fixes#13537, fixes#14134
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
This PR is supposed to fix#13582, #11522, as well as related goto
definition/reference issues (wrong position if non ascii characters
ahead).
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
<img width="411" alt="image"
src="https://github.com/user-attachments/assets/9a81953c-81b2-490d-a842-14ccaefd6972">
Changes:
1. span/completion should use byte offset instead of character index
2. lsp Postions related ops in Ropey remain to use character index
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Should be none, tested in neovim with config:
```lua
require("lspconfig").nushell.setup({
cmd = {
"nu",
"-I",
vim.fn.getcwd(),
"--no-config-file",
"--lsp",
},
filetypes = { "nu" },
})
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
tests::complete_command_with_utf_line parameters fixed to align with
true lsp requests (in character index, not byte).
As for the issue_11522.nu, manually tested:
<img width="520" alt="image"
src="https://github.com/user-attachments/assets/45496ba8-5a2d-4998-9190-d7bde31ee72c">
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is mainly https://github.com/nushell/nushell/pull/13450 (which got
reverted). Additionally:
- always clear IDs on import, disallow specifying IDs when piping
- added extra tests
- create backup of the history
# User-Facing Changes
New command: `history import`
# Tests + Formatting
Added mostly integration tests and a few smaller unit tests.
Addresses one of the points in #14162
# Description
Factors out part of the `url::build_query::to_url` function into a
separate function `url::query::record_to_qs()`, which is then used in
both `url::build_query` and `url::join`.
# User-Facing Changes
Like with `url build-query` (after #14073), `url join` will allow list
values in `params` and behavior of two commands will be same.
```nushell
> {a: ["one", "two"], b: "three"} | url build-query
"a=one&a=two&b=three"
> {scheme: "http", host: "host", params: {a: ["one", "two"], b: "three"}} | url join
"http://host?a=one&a=two&b=three"
```
# Tests + Formatting
Added an example to `url join` for the new behavior.
# Description
This PR allows oem code pages to be used in decoding by specifying the
code page number.
## Before
## After (umlauts)
closes https://github.com/nushell/nushell/issues/14168
I abstracted the decoding a bit. Here are my function comments on
how/why.
```rust
// Since we have two different decoding mechanisms, we allow oem_cp to be
// specified by only a number like `open file | decode 850`. If this decode
// parameter parses as a usize then we assume it was intentional and use oem_cp
// crate. Otherwise, if it doesn't parse as a usize, we assume it was a string
// and use the encoding_rs crate to try and decode it.
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Update the dockerfile for alpine image, related
https://github.com/nushell/nushell/issues/14171 :
1. Add armv7 arch support
2. Add more opencontainers labels, see:
https://github.com/opencontainers/image-spec/blob/main/annotations.md#pre-defined-annotation-keys
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Nushell docker images will be provided for each official release
- There will be a `nushell:nightly` tag for the latest nightly release
# After Submitting
1. The workflow that build the images will be provided in
[nushell/nightly](https://github.com/nushell/nightly) repo later
2. Alpine image will be provided as the default, we may also add Debian
images later
Fixes#14176
# Description
Since the Linux `/usr/bin/clear` binary doesn't exhibit the issue in
#14176, I checked to see what ANSI escapes it is emitting:
```nu
nu -c '^clear; "111\n222\n333"' | less
# or
bash -c 'clear -x; echo -e "111\n222\n333"' | less
```
Both show the same thing:
```
ESC[HESC[2JESC[3J111
222
333
(END)
```
This is the equivalent of:
```nu
$"(ansi home)(ansi clear_entire_screen)(ansi clear_entire_screen_plus_buffer)111\n222\n333"
```
However, our internal `clear` is sending only the Home and 3J. While
this *should*, in theory, work, it's (a) clear that it doesn't, and (b)
`/usr/bin/clear` seemingly knows this and already has the solution (or
at least workaround). From looking at the `ncurses` source, it appears
it is getting this information from the terminal capabilities. That
said, support for `2J` and `3J` is fairly universal, and it's what we
send in `clear` and `clear --keep-scrollback` anyway, so there's no harm
AFAICT in sending both like `/usr/bin/clear` does.
Also tested and fixes the issue on Windows. Note that PowerShell
`Clear-Host` also did not have the issue.
Side-note: It's interesting that on Tmux, which doesn't support 2J and
3J, that `/usr/bin/clear` knows this and doesn't send those codes,
sending just an escape-[J instead. However, Nushell's `clear`, of
course, isn't checking terminal capabilities, and is continuing to send
the unsupported codes. Fortunately this doesn't appear to cause any
issues on Tmux.
# User-Facing Changes
None, AFAICT - Bugfix only.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
This PR adds an indicator when listing subcommands. That indicator tells
whether the command is a plugin, alias, or custom_command.
I changed some of the API to make this work a little easier, namely
`get_signatures()` is now `get_signatures_and_declids()`. It was used in
only one other place (run-external), so I thought it was fine to change
it.
There is a long-standing issue with aliases where they reference the
command name instead of the alias name. This PR doesn't fix that bug.
Example.
```nushell
❯ alias "str fill" = str wrap
```
```nushell
❯ str
... other stuff
Subcommands:
str wrap (alias) - Alias for `str wrap`
str wrap (plugin) - Wrap text passed into pipeline.
```
# User-Facing Changes
Slightly different output of subcommands.
# Description
This PR closes#14137 and allows the display hook to be set on byte
streams. So, with a hook like this below.
```nushell
display_output: {
metadata access {|meta| match $meta.content_type? {
"application/x-nuscript" | "application/x-nuon" | "text/x-nushell" => { nu-highlight },
"application/json" => { ^bat --language=json --color=always --style=plain --paging=never },
_ => {},
}
} | table
}
```
You could type `open toolkit.nu` and the text of toolkit.nu would be
highlighted by nu-highlight. This PR also changes the way content-type
is assigned with `open`. Previously it would only assign it if `--raw`
was specified.
Lastly, it changes the `is_external()` function to only say
`ByteStreamSource::Child`'s are external instead of both Child and
`ByteStreamSource::File`. Again, this was to allow the hook to function
properly. I'm not sure what negative ramifications changing
`is_external()` could have, but there may be some?
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tries to make `to text` more consistent with how it adds
newlines and also gives you an opt-out --no-newline option.
I wasn't sure how to change the `PipelineData::ByteStream` match arm. I
figure something needs to be done there but I'm not sure how to do it.
# User-Facing Changes
newlines are more consistent.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds the `name` column back to keybindings.
This may be considered a hack since the reedline keybinding has no spot
for name, but it seems to work.
Bumps [uuid](https://github.com/uuid-rs/uuid) from 1.10.0 to 1.11.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/uuid-rs/uuid/releases">uuid's
releases</a>.</em></p>
<blockquote>
<h2>1.11.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Upgrade zerocopy to 0.8 by <a
href="https://github.com/yotamofek"><code>@yotamofek</code></a> in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/771">uuid-rs/uuid#771</a></li>
<li>Prepare for 1.11.0 release by <a
href="https://github.com/KodrAus"><code>@KodrAus</code></a> in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/772">uuid-rs/uuid#772</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/yotamofek"><code>@yotamofek</code></a>
made their first contribution in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/771">uuid-rs/uuid#771</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/uuid-rs/uuid/compare/1.10.0...1.11.0">https://github.com/uuid-rs/uuid/compare/1.10.0...1.11.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="4473398413"><code>4473398</code></a>
Merge pull request <a
href="https://redirect.github.com/uuid-rs/uuid/issues/772">#772</a> from
uuid-rs/cargo/1.11.0</li>
<li><a
href="59fbb1e695"><code>59fbb1e</code></a>
prepare for 1.11.0 release</li>
<li><a
href="d9b34e7c93"><code>d9b34e7</code></a>
Merge pull request <a
href="https://redirect.github.com/uuid-rs/uuid/issues/771">#771</a> from
yotamofek/zerocopy_0.8</li>
<li><a
href="14b24206c6"><code>14b2420</code></a>
Upgrade zerocopy to 0.8</li>
<li>See full diff in <a
href="https://github.com/uuid-rs/uuid/compare/1.10.0...1.11.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [bytes](https://github.com/tokio-rs/bytes) from 1.7.1 to 1.8.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/tokio-rs/bytes/releases">bytes's
releases</a>.</em></p>
<blockquote>
<h2>Bytes 1.8.0</h2>
<h1>1.8.0 (October 21, 2024)</h1>
<ul>
<li>Guarantee address in <code>split_off</code>/<code>split_to</code>
for empty slices (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/740">#740</a>)</li>
</ul>
<h2>Bytes 1.7.2</h2>
<h1>1.7.2 (September 17, 2024)</h1>
<h3>Fixed</h3>
<ul>
<li>Fix default impl of <code>Buf::{get_int, get_int_le}</code> (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/732">#732</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>Fix double spaces in comments and doc comments (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/731">#731</a>)</li>
</ul>
<h3>Internal changes</h3>
<ul>
<li>Ensure BytesMut::advance reduces capacity (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/728">#728</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/tokio-rs/bytes/blob/master/CHANGELOG.md">bytes's
changelog</a>.</em></p>
<blockquote>
<h1>1.8.0 (October 21, 2024)</h1>
<ul>
<li>Guarantee address in <code>split_off</code>/<code>split_to</code>
for empty slices (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/740">#740</a>)</li>
</ul>
<h1>1.7.2 (September 17, 2024)</h1>
<h3>Fixed</h3>
<ul>
<li>Fix default impl of <code>Buf::{get_int, get_int_le}</code> (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/732">#732</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>Fix double spaces in comments and doc comments (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/731">#731</a>)</li>
</ul>
<h3>Internal changes</h3>
<ul>
<li>Ensure BytesMut::advance reduces capacity (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/728">#728</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="c45697ce42"><code>c45697c</code></a>
chore: prepare bytes v1.8.0 (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/741">#741</a>)</li>
<li><a
href="0ac54ca706"><code>0ac54ca</code></a>
Guarantee address in split_off/split_to for empty slices (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/740">#740</a>)</li>
<li><a
href="d7c1d658d9"><code>d7c1d65</code></a>
chore: prepare bytes v1.7.2 (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/736">#736</a>)</li>
<li><a
href="ac46ebdd46"><code>ac46ebd</code></a>
ci: update nightly to nightly-2024-09-15 (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/734">#734</a>)</li>
<li><a
href="79fb85323c"><code>79fb853</code></a>
fix: apply sign extension when decoding int (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/732">#732</a>)</li>
<li><a
href="291df5acc9"><code>291df5a</code></a>
Fix double spaces in comments and doc comments (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/731">#731</a>)</li>
<li><a
href="ed7d5ff39e"><code>ed7d5ff</code></a>
test: ensure BytesMut::advance reduces capacity (<a
href="https://redirect.github.com/tokio-rs/bytes/issues/728">#728</a>)</li>
<li>See full diff in <a
href="https://github.com/tokio-rs/bytes/compare/v1.7.1...v1.8.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Update to the latest reedline commit.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR aims to close#14027, in which it was noticed that the transpose
command "swallows" error messages.
*Note that in exploring the linked issue, [other situations were
identified](https://github.com/nushell/nushell/issues/14027#issuecomment-2414602880)
which also produce inconsistent behaviour. These have knowingly been
omitted from this PR, to minimize its scope, and since they seem to have
a different cause. It's probably best to make a separate issue/PR in
which to tackle a broader scan of error handling, with a suspected
relation to streams.*
# User-Facing Changes
The user will see errors from deeper in the pipeline, in case the errors
originated there.
# Tests + Formatting
Toolkit PR check was run successfully.
One test was added, covering this exact situation, in order to prevent
regressions.
The bug is relatively obscure, so it may be prone to reappear during
refactorings.
Fixes#13757, fixes#9562
# User-Facing Changes
- `unclosed |` is returned for malformed closure parameters:
```
{ |a }
```
- Parameter list closing pipes are highlighted as part of the closure
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Swagger supports lists (a.k.a arrays) in query parameters:
https://swagger.io/docs/specification/v3_0/serialization/
It supports three different styles:
- explode=true
- spaceDelimited
- pipeDelimited
With explode=true being the default and hence most common. It is the
hardest to use inside of nushell, as the others are just a `string join`
away. This commit adds lists with the explode=true format.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Before:
: {a[]: [one two three], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #33:1:1]
1 │ {a[]: [one two three], b: four} | url build-query
· ───────────────┬─────────────── ───────┬───────
· │ ╰── Expected a record with string values
· ╰── value originates from here
╰────
After:
: {a[]: [one two three], b: four} | url build-query
a%5B%5D=one&a%5B%5D=two&a%5B%5D=three&b=four
Despite reading CONTRIBUTING.md I didn't get approval before making the
change. My judgment is that this doesn't qualify as being "change
something significantly".
# Tests + Formatting
I added the Example instance for the automatic tests. I couldn't figure
out how to add an Example for the error case, so I did that with manual
testing. E.g.:
: {a[]: [one two [three]], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #3:1:1]
1 │ {a[]: [one two [three]], b: four} | url build-query
· ────────────────┬──────────────── ───────┬───────
· │ ╰── Expected a record with list of string values
· ╰── value originates from here
╰────
: {a[]: [one two 3hr], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #4:1:1]
1 │ {a[]: [one two 3hr], b: four} | url build-query
· ──────────────┬────────────── ───────┬───────
· │ ╰── Expected a record with list of string values
· ╰── value originates from here
╰────
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I ran the four cargo commands on my local machine. I had to run the
tests with:
LANG=C and -j 1 and even then I got one failure:
thread 'commands::umkdir::mkdir_umask_permission' panicked at
crates/nu-command/tests/commands/umkdir.rs:148:9:
assertion `left == right` failed: Most *nix systems have 0o00022 as the
umask. So directory permission should be 0o40755 = 0o
40777 & (!0o00022)
left: 16893
right: 16877
but this isn't related to this change (I seem to not be running most
*nix system; and don't have a lot of RAM for the number of cores). The
other three cargo commands didn't have errors or warnings.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I will add the new example to [the
documentation](https://github.com/nushell/nushell.github.io).
# Open questions / possible future work
Things I noticed, and would like to mention and am open to adding, but
don't think I am deep enough in nushell to do them pro-actively.
## Add an argument for the other query parameter list styles
I don't know how frequent they are and I currently don't need them, so
following KISS I didn't add them.
## long input_span marked
In e.g.:
: {a[]: [one two 3hr], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #4:1:1]
1 │ {a[]: [one two 3hr], b: four} | url build-query
· ──────────────┬────────────── ───────┬───────
· │ ╰── Expected a record with list of string values
· ╰── value originates from here
╰────
the entire record is marked as input_span instead of just the "3hr" that
is causing the problem. Changing that would be trivial, but I'm not deep
enough into nushell to understand all the consequences of changing that.
## Error message says string values despite accepting numbers etc.
The error message said it only accepted strings despite accepting
numbers etc. (anything it can coerce into string). I couldn't find a
good wording myself and that was how it was before. I simply added a
"list of strings".
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
fixes#13835
The `concat` function from `span.rs` assumes that two consecutive span
intervals must overlap. But when parsing `let` and `mut` expressions, we
call `parts_including_redirection` which chains two slices of span and
leads to the above condition not holding. So my solution here is to sort
them after chaining.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes the range contains logic to take the step into account.
```nushell
# before
2 in 1..3.. # true
# now
2 in 1..3.. # false
```
---
I encountered another issue while adding tests. Due to floating point
precision, `2.1 in 1..1.1..3` will return `false`. The floating point
error is even bigger than `f64::EPSILON` (`0.09999999999999876` vs
`2.220446049250313e-16`). This issue disappears with bigger numbers.
I tried a different algorithm (checking if the estimated number of steps
is close enough to any integer) but the results are still pretty bad:
```rust
let n_steps = (value - self.start) / self.step; // 14.999999999999988
(n_steps - n_steps.round()).abs() < f64::EPSILON // returns false
```
Maybe it can be shipped like this, the REPL already has floating point
errors (`1.1 - 1` returns `0.10000000000000009`). Or maybe there's a way
to fix this that I didn't think of. I'm open to ideas! But in any case
performing this kind of checks on a range of floats seems more niche
than doing it on a range of ints.
# User-Facing Changes
Code that depended on this behavior to check if a number is between
`start` and `end` will potentially return a different value.
# Tests + Formatting
# After Submitting
With this many contributors you otherwise have to scroll really far to
get down to the license info.
The alternative would be to limit the number of faces we show, but it is
cool to have them all (as long as the generated svg doesn't take too
long to load or generate)
# Description
This PR adds `start_time` to the MacOS `ps -l` command. Was requested in
discord. `start_time` is displayed in `Local` time.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
/cc @cablehead
# Description
This PR adds a couple more options for dealing with try/catch errors. It
adds a `json` version of the error and a `rendered` version of the
error. It also respects the error_style configuration point.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates `group-by` and `split-by` to allow other nushell Values
to be used, namely bools.
### Before
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #1:1:2]
1 │ [false, false, true, false, true, false] | group-by | table -e
· ──┬──
· ╰── can't convert bool to string
╰────
```
### After
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
╭───────┬───────────────╮
│ │ ╭───┬───────╮ │
│ false │ │ 0 │ false │ │
│ │ │ 1 │ false │ │
│ │ │ 2 │ false │ │
│ │ │ 3 │ false │ │
│ │ ╰───┴───────╯ │
│ │ ╭───┬──────╮ │
│ true │ │ 0 │ true │ │
│ │ │ 1 │ true │ │
│ │ ╰───┴──────╯ │
╰───────┴───────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Nushell currently depends on three different versions of the `windows`
crate: `0.44.0`, `0.52.0`, and `0.54.0`. This PR bumps several
dependencies so that the `nu` binary only depends on `0.56.0`.
On my machine, this PR makes `cargo build` about 10% faster.
The polars plugin still uses its own version of the `windows` crate
though, which is not ideal. We'll need to bump the `polars` crate to fix
that, but it breaks a lot of our code. (`polars 1.0` release anyone?)
# Description
This PR adds `like` as a synonym for `=~` and `not-like` as a synonym
for `!~`. This is mainly a quality-of-life change to help those people
who think in sql.
closes#13261
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13967
The key changes lays in `nu-protocol/src/module.rs`, when resolving
import pattern, nushell only needs to bring `$module` with a record
value if it defines any constants.
# User-Facing Changes
```nushell
module spam {}
use spam
```
Will no longer create a `$spam` variable with an empty record.
# Tests + Formatting
Adjusted some tests and added some tests.
Closes#13654
# User-Facing Changes
- Short flags are now fully type-checked,
including null and record signatures for literal arguments:
```nushell
def test [-v: record<l: int>] {};
test -v null # error
test -v {l: ""} # error
def test2 [-v: int] {};
let v = ""
test2 -v $v # error
```
- `polars unpivot` `--index`/`--on` and `into value --columns`
now accept `list` values
# Description
[Context on
Discord](https://discord.com/channels/601130461678272522/855947301380947968/1292279795035668583)
**This is a breaking change, due to the removal of `is_running`.**
Some users find the `plugin list` command confusing, because it doesn't
show anything different after running `plugin add` or `plugin rm`. This
modifies the `plugin list` command to also look at the plugin registry
file to give some idea of how the plugins in engine state differ from
those in the plugin registry file.
The following values of `status` are now produced instead of
`is_running`:
- `added`: The plugin is present in the plugin registry file, but not in
the engine.
- `loaded`: The plugin is present both in the plugin registry file and
in the engine, but is not running.
- `running`: The plugin is currently running, and the `pid` column
should contain its process ID.
- `modified`: The plugin state present in the plugin registry file is
different from the state in the engine.
- `removed`: The plugin is still loaded in the engine, but is not
present in the plugin registry file.
- `invalid`: The data in the plugin registry file couldn't be
deserialized, and the plugin most likely needs to be added again.
Example (`commands` omitted):
```
╭──────┬─────────────────────┬────────────┬───────────┬──────────┬─────────────────────────────────────────────────────┬─────────╮
│ # │ name │ version │ status │ pid │ filename │ shell │
├──────┼─────────────────────┼────────────┼───────────┼──────────┼─────────────────────────────────────────────────────┼─────────┤
│ 0 │ custom_values │ 0.1.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_custom_values │ │
│ 1 │ dbus │ 0.11.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_dbus │ │
│ 2 │ example │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_example │ │
│ 3 │ explore_ir │ 0.3.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_explore_ir │ │
│ 4 │ formats │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_formats │ │
│ 5 │ gstat │ 0.98.1 │ running │ 236662 │ /home/devyn/.cargo/bin/nu_plugin_gstat │ │
│ 6 │ inc │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_inc │ │
│ 7 │ polars │ 0.98.1 │ added │ │ /home/devyn/.cargo/bin/nu_plugin_polars │ │
│ 8 │ query │ 0.98.1 │ removed │ │ /home/devyn/.cargo/bin/nu_plugin_query │ │
│ 9 │ stress_internals │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_stress_internals │ │
╰──────┴─────────────────────┴────────────┴───────────┴──────────┴─────────────────────────────────────────────────────┴─────────╯
```
# User-Facing Changes
To `plugin list`:
* **Breaking:** The `is_running` column is removed and replaced with
`status`. Use `status == running` to filter equivalently.
* The `--plugin-config` from other plugin management commands is now
supported.
* Added an `--engine` flag which behaves more or less like before, and
doesn't load the plugin registry file at all.
* Added a `--registry` flag which only checks the plugin registry file.
All plugins appear as `added` since there is no state to compare with.
Because the default is to check both, the `plugin list` command might be
a little bit slower. If you don't need to check the plugin registry
file, the `--engine` flag does not load the plugin registry file at all,
so it should be just as fast as before.
# Tests + Formatting
Added tests for `added` and `removed` statuses. `modified` and `invalid`
are a bit more tricky so I didn't try.
# After Submitting
- [ ] update documentation that references the `plugin list` command
- [ ] release notes
# Description
Provides the ability to decomes struct columns into seperate columns for
each field:
<img width="655" alt="Screenshot 2024-10-16 at 09 57 22"
src="https://github.com/user-attachments/assets/6706bd36-8d38-4365-b58d-ba82f2d5ba9a">
# User-Facing Changes
- provides a new command `polars unnest` for decomposing struct fields
into separate columns.
# Description
This PR adds a couple more options for dealing with try/catch errors. It
adds a `json` version of the error and a `rendered` version of the
error. It also respects the error_style configuration point.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates `group-by` and `split-by` to allow other nushell Values
to be used, namely bools.
### Before
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #1:1:2]
1 │ [false, false, true, false, true, false] | group-by | table -e
· ──┬──
· ╰── can't convert bool to string
╰────
```
### After
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
╭───────┬───────────────╮
│ │ ╭───┬───────╮ │
│ false │ │ 0 │ false │ │
│ │ │ 1 │ false │ │
│ │ │ 2 │ false │ │
│ │ │ 3 │ false │ │
│ │ ╰───┴───────╯ │
│ │ ╭───┬──────╮ │
│ true │ │ 0 │ true │ │
│ │ │ 1 │ true │ │
│ │ ╰───┴──────╯ │
╰───────┴───────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Nushell currently depends on three different versions of the `windows`
crate: `0.44.0`, `0.52.0`, and `0.54.0`. This PR bumps several
dependencies so that the `nu` binary only depends on `0.56.0`.
On my machine, this PR makes `cargo build` about 10% faster.
The polars plugin still uses its own version of the `windows` crate
though, which is not ideal. We'll need to bump the `polars` crate to fix
that, but it breaks a lot of our code. (`polars 1.0` release anyone?)
# Description
This PR adds `like` as a synonym for `=~` and `not-like` as a synonym
for `!~`. This is mainly a quality-of-life change to help those people
who think in sql.
closes#13261
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13967
The key changes lays in `nu-protocol/src/module.rs`, when resolving
import pattern, nushell only needs to bring `$module` with a record
value if it defines any constants.
# User-Facing Changes
```nushell
module spam {}
use spam
```
Will no longer create a `$spam` variable with an empty record.
# Tests + Formatting
Adjusted some tests and added some tests.
Closes#13654
# User-Facing Changes
- Short flags are now fully type-checked,
including null and record signatures for literal arguments:
```nushell
def test [-v: record<l: int>] {};
test -v null # error
test -v {l: ""} # error
def test2 [-v: int] {};
let v = ""
test2 -v $v # error
```
- `polars unpivot` `--index`/`--on` and `into value --columns`
now accept `list` values
# Description
[Context on
Discord](https://discord.com/channels/601130461678272522/855947301380947968/1292279795035668583)
**This is a breaking change, due to the removal of `is_running`.**
Some users find the `plugin list` command confusing, because it doesn't
show anything different after running `plugin add` or `plugin rm`. This
modifies the `plugin list` command to also look at the plugin registry
file to give some idea of how the plugins in engine state differ from
those in the plugin registry file.
The following values of `status` are now produced instead of
`is_running`:
- `added`: The plugin is present in the plugin registry file, but not in
the engine.
- `loaded`: The plugin is present both in the plugin registry file and
in the engine, but is not running.
- `running`: The plugin is currently running, and the `pid` column
should contain its process ID.
- `modified`: The plugin state present in the plugin registry file is
different from the state in the engine.
- `removed`: The plugin is still loaded in the engine, but is not
present in the plugin registry file.
- `invalid`: The data in the plugin registry file couldn't be
deserialized, and the plugin most likely needs to be added again.
Example (`commands` omitted):
```
╭──────┬─────────────────────┬────────────┬───────────┬──────────┬─────────────────────────────────────────────────────┬─────────╮
│ # │ name │ version │ status │ pid │ filename │ shell │
├──────┼─────────────────────┼────────────┼───────────┼──────────┼─────────────────────────────────────────────────────┼─────────┤
│ 0 │ custom_values │ 0.1.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_custom_values │ │
│ 1 │ dbus │ 0.11.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_dbus │ │
│ 2 │ example │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_example │ │
│ 3 │ explore_ir │ 0.3.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_explore_ir │ │
│ 4 │ formats │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_formats │ │
│ 5 │ gstat │ 0.98.1 │ running │ 236662 │ /home/devyn/.cargo/bin/nu_plugin_gstat │ │
│ 6 │ inc │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_inc │ │
│ 7 │ polars │ 0.98.1 │ added │ │ /home/devyn/.cargo/bin/nu_plugin_polars │ │
│ 8 │ query │ 0.98.1 │ removed │ │ /home/devyn/.cargo/bin/nu_plugin_query │ │
│ 9 │ stress_internals │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_stress_internals │ │
╰──────┴─────────────────────┴────────────┴───────────┴──────────┴─────────────────────────────────────────────────────┴─────────╯
```
# User-Facing Changes
To `plugin list`:
* **Breaking:** The `is_running` column is removed and replaced with
`status`. Use `status == running` to filter equivalently.
* The `--plugin-config` from other plugin management commands is now
supported.
* Added an `--engine` flag which behaves more or less like before, and
doesn't load the plugin registry file at all.
* Added a `--registry` flag which only checks the plugin registry file.
All plugins appear as `added` since there is no state to compare with.
Because the default is to check both, the `plugin list` command might be
a little bit slower. If you don't need to check the plugin registry
file, the `--engine` flag does not load the plugin registry file at all,
so it should be just as fast as before.
# Tests + Formatting
Added tests for `added` and `removed` statuses. `modified` and `invalid`
are a bit more tricky so I didn't try.
# After Submitting
- [ ] update documentation that references the `plugin list` command
- [ ] release notes
# Description
Provides the ability to decomes struct columns into seperate columns for
each field:
<img width="655" alt="Screenshot 2024-10-16 at 09 57 22"
src="https://github.com/user-attachments/assets/6706bd36-8d38-4365-b58d-ba82f2d5ba9a">
# User-Facing Changes
- provides a new command `polars unnest` for decomposing struct fields
into separate columns.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
The idea comes from @amtoine, I think it would be good to keey
`display_error.exit_code` same value, if user is using default config or
using no config file at all.
# Description
Adds back the `to_ascii_lowercase` deleted in #13802. Also fixes the
error messages having the lowercased value instead of the original
value.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently, the `save -p` command updates the progress animation each
time any data is written. This PR rate limits the animation so it
doesn't play as fast.
Here's an asciinema of [current
behavior](https://asciinema.org/a/8RWrWTozQSceqx6tYY7kzblqj) and
[proposed behavior](https://asciinema.org/a/E1pi0gMwMwFcxVHOy9Fv1Kk6R).
# User-Facing Changes
* `save -p` progress bar has a smoother animation
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Adds a simple command for importing history between different file
formats. It essentially opens the history of the format opposite of the
one currently selected, and writes new items to the current history. It
also supports piping, because why not.
As more history backends are added, this may need to be extended -
either make the source explicit, or autodetect based on existing files.
For now it should be good though.
This should replace some of the work-arounds mentioned in
https://github.com/nushell/nushell/issues/9403.
I suspect it will have at least one problem:
https://github.com/nushell/nushell/issues/9403 mentions the history file
might be locked on Windows. That being said, I was able to successfully
import plaintext history into sqlite on Linux, so the command should be
functional at least in that environment.
The locking issue could be solved later by plumbing reedline history to
the command (so that it doesn't have to reopen it). But first, I want to
get some general input on the approach.
# User-Facing Changes
New command: `history import`
# Tests + Formatting
There's a unit test, but didn't add a proper integration test yet. Not
entirely sure how - I see there's the `nu!` macro for that, but not sure
how feasible it's to inspect history generated by commands ran that way.
Could use a hint.2
Closes#13920
# User-Facing Changes
`random binary` and `random chars` now support filesize arguments:
```nushell
random binary 1kb
random chars --length 1kb
```
# Description
Fixes#13991. This was done by more clearly separating the case when a
pipeline is drained vs when it is being written (to a file).
I also added an `OutDest::Print` case which might not be strictly
necessary, but is a helpful addition.
# User-Facing Changes
Bug fix.
# Tests + Formatting
Added a test.
# After Submitting
There are still a few redirection bugs that I found, but they require
larger code changes, so I'll leave them until after the release.
# Description
Apologies - The updated wording I used in the last PR *description* was
not what I actually pushed. I failed to commit and push the last update.
This PR fixes the code to reflect what was described in #14065:
```
-r, --header-row - use the first input column as the table header-row (or keynames when combined with --as-record)
```
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
(And visually confirmed help changes ;-))
# After Submitting
N/A
# Description
@Yethal discovered that `FooterMode::Auto` in the config as
`$env.config.footer_mode = auto` did not work. This PR attempts to fix
that problem by implementing the auto algorithm that was already
supposed to work.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR standardizes updates to the config through a new
`UpdateFromValue` trait. For now, this trait is private in case we need
to make changes to it.
Note that this PR adds some additional `ShellError` cases to create
standard error messages for config errors. A follow-up PR will move
usages of the old error cases to these new ones. This PR also uses
`Type::custom` in lots of places (e.g., for string enums). Not sure if
this is something we want to encourage.
# User-Facing Changes
Should be none.
# Description
The help description on `transpose --header-row/-r` appears to be wrong
(and now that I understand that, it probably explains why it's confused
me for so long).
It currently says:
```
-r, --header-row - treat the first row as column names
```
This just looks wrong - The first **row** of the input data is not
considered. It's the first **column** that is used to create the
header-row of the transposed table.
For example:
To record using `-dr`:
```nu
[[col-names values ];
[foo 1 ]
[bar 5 ]
[baz 7 ]
[cat -12 ]
] | transpose -dr
╭─────┬─────╮
│ foo │ 1 │
│ bar │ 5 │
│ baz │ 7 │
│ cat │ -12 │
╰─────┴─────╯
```
To table using `-r`:
```nu
[[col-names values ];
[foo 1 ]
[bar 5 ]
[baz 7 ]
[cat -12 ]
] | transpose -r
╭───┬─────┬─────┬─────┬─────╮
│ # │ foo │ bar │ baz │ cat │
├───┼─────┼─────┼─────┼─────┤
│ 0 │ 1 │ 5 │ 7 │ -12 │
╰───┴─────┴─────┴─────┴─────╯
```
# User-Facing Changes
Updates the help description to:
```
-r, --header-row - use the first input column as the table header-row (or keynames when combined with --as-record)
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Currently there is a bit of chaos regarding construction of history file
paths. Various pieces of code across a number of crates reimplement the
same/similar logic:
- There is `get_history_path`, but it requires a directory parameter (it
really just joins it with a file name).
- Some places use a const for the directory parameter, others use a
string literal - in all cases the value seems to be `"nushell"`.
- Some places assume the `"nushell"` value, other plumb it down from
close to the top of the call stack.
- Some places use a constant for history file names while others assume
it.
This PR tries to make it so that the history/config path format is
defined in a single places and so dependencies on it are easier to
follow:
- It removes `get_history_path` and adds a `file_path` method to
`HistoryConfig` instead (an extra motivation being, this is a convenient
place that can be used from all creates that need a history file path)
- Adds a `nu_config_dir` function that returns the nushell configuration
directory.
- Updates existing code to rely on the above, effectively removing
duplicate uses of `"nushell"` and `NUSHELL_FOLDER` and assumptions about
file names associated with different history formats
# User-Facing Changes
None
# Description
Contributors to this projects will have a test failure if their `umask`
is not set to `0022`.
Apparently on Debian (at least on my install), it is set to `0002` which
makes my test fail. While `0022` is safer than the value I have, I want
to reduce the amount if issue new contributors could have.
I am making this test not assuming anything and instead, reading the
user umask.
# Related discussion
I see that the `umask` command implementation has been discussed in
#12256 . We could use this and enforce a umask for tests who rely on
this. I believe however (let me know what you think) that hard coded
values are harder to read in the test.
# User-Facing Changes
N/A
# Tests + Formatting
All green on my side after this MR 👍
# After Submitting
Documentation is not impacted
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Removes the `group` command that was deprecated back in 0.96.0 with
#13377.
# User-Facing Changes
Breaking change, removed `group` command.
# Description
This changes the names returned by CustomValue::name() of the various
custom value structs to just say the name of the thing they represent.
For instance "DataFrameCustomValue" is not just "DataFrame".
# User-Facing Changes
- Places such as or errors where NuDataFrameCustomValue would be seen,
now just shows as NuDataFrame.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Create Sha256sum file for each release binary
A test release could be found here:
https://github.com/nushell/nightly/releases/tag/0.98.2
# Description
This PR makes visual selection in Nushell a little bit more readable.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13431Fixes: #13578
The issue happened because nushell thinks external program name and
external arg with totally same rule. But actually they are a little bit
different.
When parsing external program name, backtick is a thing and it should be
keeped.
But when parsing external args, backtick is just a mark that it's a
**bareword which may contain space**. So in this context, it's already
useless.
# User-Facing Changes
After the pr, the following command will work as intended.
```nushell
> ^echo `"hello"`
hello
```
# Tests + Formatting
Added 3 test cases.
# Description
Fixes: #13425
Similar to `source-env`, `use` command should also remove `FILE_PWD` and
`CURRENT_FILE` after evaluating code block in the module file.
And user input can be a directory, in this case, we need to use the
return value of `find_in_dirs_env` carefully, so in case, I renamed
`maybe_file_path` to `maybe_file_path_or_dir` to emphasize it.
# User-Facing Changes
`$env.FILE_PWD` and `$env.CURRENT_FILE` will be more reliable to use.
# Tests + Formatting
Added 2 test cases.
# After Submitting
NaN
# Description
Uses "normal" module `std/<submodule>/mod.nu` instead of renaming the
files (as requested in #13842).
# User-Facing Changes
No user-facing changes other than in `view files` results. Imports
remain the same after this PR.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Also manually confirmed that it does not interfere with nupm, since we
did have a conflict at one point (and it's not possible to test here).
# Performance Tests
## Linux
### Nushell Startup - No config
```nu
bench --pretty -n 200 { <path_to>/nu -c "exit" }
```
| Release | Startup Time |
| --- | --- |
| 0.98.0 | 22ms 730µs 768ns +/- 1ms 515µs 942ns
| This commit | 9ms 312µs 68ns +/- 709µs 378ns
| Yesterday's nightly | 9ms 230µs 953ns +/- 9ms 67µs 689ns
### Nushell Startup - Load full standard library
Measures relative impact of a full `use std *`, which isn't recommended,
but worth tracking.
```nu
bench --pretty -n 200 { <path_to>/nu -c "use std *; exit" }
```
| Release | Startup Time |
| --- | --- |
| 0.98.0 | 23ms 10µs 636ns +/- 1ms 277µs 854ns
| This commit | 26ms 922µs 769ns +/- 562µs 538ns
| Yesterday's nightly | 28ms 133µs 95ns +/- 761µs 943ns
| `deprecated_dirs` removal PR * | 23ms 610µs 333ns +/- 369µs 436ns
\* Current increase is partially due to double-loading `dirs` with
removal warning in older version.
# After Submitting
Still TODO - Update standard library doc
# Description
This PR is from a [discussion in
Discord](https://discord.com/channels/601130461678272522/988303282931912704/1292900183742611466).
The gist is that `format date` didn't respect the $env.LC_TIME env var.
The reason for this is because it was using std::env::var which doesn't
understand nushell's env. Now, this should work.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Closes#12535
Implements sort-by functionality of #8322
Fixes sort-by part of #8667
This PR does two main things: add a new cell path and closure parameter
to `sort-by`, and attempt to make Nushell's sorting behavior
well-defined.
## `sort-by` features
The `columns` parameter is replaced with a `comparator` parameter, which
can be a cell path or a closure. Examples are from docs PR.
1. Cell paths
The basic interactive usage of `sort-by` is the same. For example, `ls |
sort-by modified` still works the same as before. It is not quite a
drop-in replacement, see [behavior changes](#behavior-changes).
Here's an example of how the cell path comparator might be useful:
```nu
> let cities = [
{name: 'New York', info: { established: 1624, population: 18_819_000 } }
{name: 'Kyoto', info: { established: 794, population: 37_468_000 } }
{name: 'São Paulo', info: { established: 1554, population: 21_650_000 }
}
]
> $cities | sort-by info.established
╭───┬───────────┬────────────────────────────╮
│ # │ name │ info │
├───┼───────────┼────────────────────────────┤
│ 0 │ Kyoto │ ╭─────────────┬──────────╮ │
│ │ │ │ established │ 794 │ │
│ │ │ │ population │ 37468000 │ │
│ │ │ ╰─────────────┴──────────╯ │
│ 1 │ São Paulo │ ╭─────────────┬──────────╮ │
│ │ │ │ established │ 1554 │ │
│ │ │ │ population │ 21650000 │ │
│ │ │ ╰─────────────┴──────────╯ │
│ 2 │ New York │ ╭─────────────┬──────────╮ │
│ │ │ │ established │ 1624 │ │
│ │ │ │ population │ 18819000 │ │
│ │ │ ╰─────────────┴──────────╯ │
╰───┴───────────┴────────────────────────────╯
```
2. Key closures
You can supply a closure which will transform each value into a sorting
key (without changing the underlying data). Here's an example of a key
closure, where we want to sort a list of assignments by their average
grade:
```nu
> let assignments = [
{name: 'Homework 1', grades: [97 89 86 92 89] }
{name: 'Homework 2', grades: [91 100 60 82 91] }
{name: 'Exam 1', grades: [78 88 78 53 90] }
{name: 'Project', grades: [92 81 82 84 83] }
]
> $assignments | sort-by { get grades | math avg }
╭───┬────────────┬───────────────────────╮
│ # │ name │ grades │
├───┼────────────┼───────────────────────┤
│ 0 │ Exam 1 │ [78, 88, 78, 53, 90] │
│ 1 │ Project │ [92, 81, 82, 84, 83] │
│ 2 │ Homework 2 │ [91, 100, 60, 82, 91] │
│ 3 │ Homework 1 │ [97, 89, 86, 92, 89] │
╰───┴────────────┴───────────────────────╯
```
3. Custom sort closure
The `--custom`, or `-c`, flag will tell `sort-by` to interpret closures
as custom sort closures. A custom sort closure has two parameters, and
returns a boolean. The closure should return `true` if the first
parameter comes _before_ the second parameter in the sort order.
For a simple example, we could rewrite a cell path sort as a custom sort
(see
[here](https://github.com/nushell/nushell.github.io/pull/1568/files#diff-a7a233e66a361d8665caf3887eb71d4288000001f401670c72b95cc23a948e86R231)
for a more complex example):
```nu
> ls | sort-by -c {|a, b| $a.size < $b.size }
╭───┬─────────────────────┬──────┬──────────┬────────────────╮
│ # │ name │ type │ size │ modified │
├───┼─────────────────────┼──────┼──────────┼────────────────┤
│ 0 │ my-secret-plans.txt │ file │ 100 B │ 10 minutes ago │
│ 1 │ shopping_list.txt │ file │ 100 B │ 2 months ago │
│ 2 │ myscript.nu │ file │ 1.1 KiB │ 2 weeks ago │
│ 3 │ bigfile.img │ file │ 10.0 MiB │ 3 weeks ago │
╰───┴─────────────────────┴──────┴──────────┴────────────────╯
```
## Making sort more consistent
I think it's important for something as essential as `sort` to have
well-defined semantics. This PR contains some changes to try to make the
behavior of `sort` and `sort-by` consistent. In addition, after working
with the internals of sorting code, I have a much deeper understanding
of all of the edge cases. Here is my attempt to try to better define
some of the semantics of sorting (if you are just interested in changes,
skip to "User-Facing changes")
- `sort`, `sort -v`, and `sort-by` now all work the same. Each
individual sort implementation has been refactored into two functions in
`sort_utils.rs`: `sort`, and `sort_by`. These can also be used in other
parts of Nushell where values need to be sorted.
- `sort` and `sort-by` used to handle `-i` and `-n` differently.
- `sort -n` would consider all values which can't be coerced into a
string to be equal
- `sort-by -i` and `sort-by -n` would only work if all values were
strings
- In this PR, insensitive sort only affects comparison between strings,
and natural sort only applies to numbers and strings (see below).
- (not a change) Before and after this PR, `sort` and `sort-by` support
sorting mixed types. There was a lot of discussion about potentially
making `sort` and `sort-by` only work on lists of homogeneous types, but
the general consensus was that `sort` should not error just because its
input contains incompatible types.
- In order to try to make working with data containing `null` values
easier, I changed the PartialOrd order to sort `Nothing` values to the
end of a list, regardless of what other types the list contains. Before,
`null` would be sorted before `Binary`, `CellPath`, and `Custom` values.
- (not a change) When sorted, lists of mixed types will contain sorted
values of each type in order, for the most part
- (not a change) For example, `[0x[1] (date now) "a" ("yesterday" | into
datetime) "b" 0x[0]]` will be sorted as `["a", "b", a day ago, now, [0],
[1]]`, where sorted strings appear first, then sorted datetimes, etc.
- (not a change) The exception to this is `Int`s and `Float`s, which
will intermix, `Strings` and `Glob`s, which will intermix, and `None` as
described above. Additionally, natural sort will intermix strings with
ints and floats (see below).
- Natural sort no longer coerce all inputs to strings.
- I did originally make natural only apply to strings, but @fdncred
pointed out that the previous behavior also allowed you to sort numeric
strings with numbers. This seems like a useful feature if we are trying
to support sorting with mixed types, so I settled on coercing only
numbers (int, float). This can be reverted if people don't like it.
- Here is an example of this behavior in action, which is the same
before and after this PR:
```nushell
$ [1 "4" 3 "2"] | sort --natural
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 4 │
╰───┴───╯
```
# User-Facing Changes
## New features
- Replaces the `columns` string parameter of `sort-by` with a cell path
or a closure.
- The cell path parameter works exactly as you would expect
- By default, the `closure` parameter acts as a "key sort"; that is,
each element is transformed by the closure into a sorting key
- With the `--custom` (`-c`) parameter, you can define a comparison
function for completely custom sorting order.
## Behavior changes
<details>
<summary><code>sort -v</code> does not coerce record values to
strings</summary>
This was a bit of a surprising behavior, and is now unified with the
behavior of `sort` and `sort-by`. Here's an example where you can
observe the values being implicitly coerced into strings for sorting, as
they are sorted like strings rather than numbers:
Old behavior:
```nushell
$ {foo: 9 bar: 10} | sort -v
╭─────┬────╮
│ bar │ 10 │
│ foo │ 9 │
╰─────┴────╯
```
New behavior:
```nushell
$ {foo: 9 bar: 10} | sort -v
╭─────┬────╮
│ foo │ 9 │
│ bar │ 10 │
╰─────┴────╯
```
</details>
<details>
<summary>Changed <code>sort-by</code> parameters from
<code>string</code> to <code>cell-path</code> or <code>closure</code>.
Typical interactive usage is the same as before, but if passing a
variable to <code>sort-by</code> it must be a cell path (or closure),
not a string</summary>
Old behavior:
```nushell
$ let sort = "modified"
$ ls | sort-by $sort
╭───┬──────┬──────┬──────┬────────────────╮
│ # │ name │ type │ size │ modified │
├───┼──────┼──────┼──────┼────────────────┤
│ 0 │ foo │ file │ 0 B │ 10 hours ago │
│ 1 │ bar │ file │ 0 B │ 35 seconds ago │
╰───┴──────┴──────┴──────┴────────────────╯
```
New behavior:
```nushell
$ let sort = "modified"
$ ls | sort-by $sort
Error: nu:🐚:type_mismatch
× Type mismatch.
╭─[entry #10:1:14]
1 │ ls | sort-by $sort
· ──┬──
· ╰── Cannot sort using a value which is not a cell path or closure
╰────
$ let sort = $."modified"
$ ls | sort-by $sort
╭───┬──────┬──────┬──────┬───────────────╮
│ # │ name │ type │ size │ modified │
├───┼──────┼──────┼──────┼───────────────┤
│ 0 │ foo │ file │ 0 B │ 10 hours ago │
│ 1 │ bar │ file │ 0 B │ 2 minutes ago │
╰───┴──────┴──────┴──────┴───────────────╯
```
</details>
<details>
<summary>Insensitve and natural sorting behavior reworked</summary>
Previously, the `-i` and `-n` worked differently for `sort` and
`sort-by` (see "Making sort more consistent"). Here are examples of how
these options result in different sorts now:
1. `sort -n`
- Old behavior (types other than numbers, strings, dates, and binary
sorted incorrectly)
```nushell
$ [2sec 1sec] | sort -n
╭───┬──────╮
│ 0 │ 2sec │
│ 1 │ 1sec │
╰───┴──────╯
```
- New behavior
```nushell
$ [2sec 1sec] | sort -n
╭───┬──────╮
│ 0 │ 1sec │
│ 1 │ 2sec │
╰───┴──────╯
```
2. `sort-by -i`
- Old behavior (uppercase words appear before lowercase words as they
would in a typical sort, indicating this is not actually an insensitive
sort)
```nushell
$ ["BAR" "bar" "foo" 2 "FOO" 1] | wrap a | sort-by -i a
╭───┬─────╮
│ # │ a │
├───┼─────┤
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ BAR │
│ 3 │ FOO │
│ 4 │ bar │
│ 5 │ foo │
╰───┴─────╯
```
- New behavior (strings are sorted stably, indicating this is an
insensitive sort)
```nushell
$ ["BAR" "bar" "foo" 2 "FOO" 1] | wrap a | sort-by -i a
╭───┬─────╮
│ # │ a │
├───┼─────┤
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ BAR │
│ 3 │ bar │
│ 4 │ foo │
│ 5 │ FOO │
╰───┴─────╯
```
3. `sort-by -n`
- Old behavior (natural sort does not work when data contains non-string
values)
```nushell
$ ["10" 8 "9"] | wrap a | sort-by -n a
╭───┬────╮
│ # │ a │
├───┼────┤
│ 0 │ 8 │
│ 1 │ 10 │
│ 2 │ 9 │
╰───┴────╯
```
- New behavior
```nushell
$ ["10" 8 "9"] | wrap a | sort-by -n a
╭───┬────╮
│ # │ a │
├───┼────┤
│ 0 │ 8 │
│ 1 │ 9 │
│ 2 │ 10 │
╰───┴────╯
```
</details>
<details>
<summary>
Sorting a list of non-record values with a non-existent column/path now
errors instead of sorting the values directly (<code>sort</code> should
be used for this, not <code>sort-by</code>)
</summary>
Old behavior:
```nushell
$ [2 1] | sort-by foo
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
╰───┴───╯
```
New behavior:
```nushell
$ [2 1] | sort-by foo
Error: nu:🐚:incompatible_path_access
× Data cannot be accessed with a cell path
╭─[entry #29:1:17]
1 │ [2 1] | sort-by foo
· ─┬─
· ╰── int doesn't support cell paths
╰────
```
</details>
<details>
<summary><code>sort</code> and <code>sort-by</code> output
<code>List</code> instead of <code>ListStream</code> </summary>
This isn't a meaningful change (unless I misunderstand the purpose of
ListStream), since `sort` and `sort-by` both need to collect in order to
do the sorting anyway, but is user observable.
Old behavior:
```nushell
$ ls | sort | describe -d
╭──────────┬───────────────────╮
│ type │ stream │
│ origin │ nushell │
│ subtype │ {record 3 fields} │
│ metadata │ {record 1 field} │
╰──────────┴───────────────────╯
```
```nushell
$ ls | sort-by name | describe -d
╭──────────┬───────────────────╮
│ type │ stream │
│ origin │ nushell │
│ subtype │ {record 3 fields} │
│ metadata │ {record 1 field} │
╰──────────┴───────────────────╯
```
New behavior:
```nushell
ls | sort | describe -d
╭────────┬─────────────────╮
│ type │ list │
│ length │ 22 │
│ values │ [table 22 rows] │
╰────────┴─────────────────╯
```
```nushell
$ ls | sort-by name | describe -d
╭────────┬─────────────────╮
│ type │ list │
│ length │ 22 │
│ values │ [table 22 rows] │
╰────────┴─────────────────╯
```
</details>
- `sort` now errors when nothing is piped in (`sort-by` already did
this)
# Tests + Formatting
I added lots of unit tests on the new sort implementation to enforce new
sort behaviors and prevent regressions.
# After Submitting
See [docs PR](https://github.com/nushell/nushell.github.io/pull/1568),
which is ~2/3 finished.
---------
Co-authored-by: NotTheDr01ds <32344964+NotTheDr01ds@users.noreply.github.com>
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
This is a follow-up of
https://github.com/nushell/nushell.github.io/pull/1584
The goal is to provide the user understanding of how to escape strings
# User-Facing Changes
Nothing except documentation
# Tests + Formatting
I don't know why but these two tests are failing on my system:
- `test_std_util path_add`
- `commands::umkdir::mkdir_umask_permission`
Since I hardly believe it is linked to my changes, I will let your CI
check it. Meanwhile, I will check my system, highly likely that it is
something something related to me recently switching shells, hacking my
way through prompts environments, etc.
# After Submitting
Will check how to re-generate the [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged
# Description
This PR updates nushell to the latest commit 5e556bfd.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
* Primary purpose is to fix an issue with a missing escaped opening
parenthesis in the warning message when running an old `dirs` alias.
This was creating an error condition from improper interpolation.
Also
* Incorporates #13842 feedback from @kubouch by renaming `std/lib` to
`std/util`
* Removes duplication of code in `export-env`
* Renames submodule exports to `std/<submodule>` rather than
`./<submodule>` - No user-facing change other than `view files` appears
"prettier".
* In #13842, I converted the test cases to use `use std/<module>`
syntax. Previously, the tests were (effectively) using `use std *` (due
to pre-existing bugs, now fixed).
So "before", we only had test coverage on `use std *`, and "after" we
only had test coverage on `use std/<module>`. I've started adding test
cases so that we have coverage on *both* scenarios going forward.
For now, `formats` and `util` have been updated with tests for both
scenarios. I'll continue adding the others in future PRs.
# User-Facing Changes
No user-facing changes - Bug fix, refactor, and test cases only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Still working on updating the Doc. I ran into the `dirs` issue while
writing it and rabbit-trailed to fix it in this PR.
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.25.0 to
1.26.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.26.0</h2>
<h2>[1.26.0] - 2024-10-07</h2>
<h3>Compatibility</h3>
<ul>
<li><em>(pre-commit)</em> Requires 3.2+</li>
</ul>
<h3>Fixes</h3>
<ul>
<li><em>(pre-commit)</em> Resolve deprecations in 4.0 about deprecated
stage names</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.26.0] - 2024-10-07</h2>
<h3>Compatibility</h3>
<ul>
<li><em>(pre-commit)</em> Requires 3.2+</li>
</ul>
<h3>Fixes</h3>
<ul>
<li><em>(pre-commit)</em> Resolve deprecations in 4.0 about deprecated
stage names</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="6802cc60d4"><code>6802cc6</code></a>
chore: Release</li>
<li><a
href="caa55026ae"><code>caa5502</code></a>
docs: Update changelog</li>
<li><a
href="2114c19241"><code>2114c19</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1114">#1114</a>
from tobiasraabe/patch-1</li>
<li><a
href="9de7b2c6be"><code>9de7b2c</code></a>
Updates stage names in <code>.pre-commit-hooks.yaml</code>.</li>
<li><a
href="14f49f455c"><code>14f49f4</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1105">#1105</a>
from crate-ci/renovate/unicode-width-0.x</li>
<li><a
href="58ffa4baef"><code>58ffa4b</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1108">#1108</a>
from crate-ci/renovate/stable-1.x</li>
<li><a
href="003cb76937"><code>003cb76</code></a>
chore(deps): Update dependency STABLE to v1.81.0</li>
<li><a
href="bc00184a23"><code>bc00184</code></a>
chore(deps): Update Rust crate unicode-width to 0.2.0</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.25.0...v1.26.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.5.0 to
2.6.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's
changelog</a>.</em></p>
<blockquote>
<h2>2.6.0 (2024-10-01)</h2>
<ul>
<li>Implemented <code>Clone</code> for <code>map::IntoIter</code> and
<code>set::IntoIter</code>.</li>
<li>Updated the <code>hashbrown</code> dependency to version 0.15.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="bf0362ba25"><code>bf0362b</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/354">#354</a>
from cuviper/release-2.6.0</li>
<li><a
href="bd0b4f7c8c"><code>bd0b4f7</code></a>
Add all release dates</li>
<li><a
href="53400496f4"><code>5340049</code></a>
Release 2.6.0</li>
<li><a
href="7f8022912a"><code>7f80229</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/343">#343</a>
from cuviper/hash_table</li>
<li><a
href="e577bf2556"><code>e577bf2</code></a>
Use <code>hashbrown::HashTable</code> instead of
<code>RawTable</code></li>
<li><a
href="09b48ec3b3"><code>09b48ec</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/353">#353</a>
from cuviper/move_index</li>
<li><a
href="267b83d701"><code>267b83d</code></a>
Add an explicit bounds check in <code>move_index</code></li>
<li><a
href="d74a4daffb"><code>d74a4da</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/349">#349</a>
from waywardmonkeys/improve-doc-formatting</li>
<li><a
href="5b0ed20b87"><code>5b0ed20</code></a>
docs: Improve doc formatting with backticks</li>
<li><a
href="15518f3152"><code>15518f3</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/348">#348</a>
from cuviper/clone-intoiter</li>
<li>Additional commits viewable in <a
href="https://github.com/indexmap-rs/indexmap/compare/2.5.0...2.6.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jack Wright <jack.wright@disqo.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Add ls color highlighting for *.cjs and *.mjs files in line with regular
*.js files
Add an icon to *.cjs files in line with *.js and *.mjs files
# Description
This pull request enhances the `add_parsed_keybinding` function to
provide greater flexibility in specifying keycodes for keybindings in
Nushell. Previously, the function only supported specifying keycodes
directly through character notation (e.g., `char_e` for the character
`e`). This limited users to a small set of keybindings, especially in
scenarios where specific non-English characters were needed.
With this new version, users can also specify characters using their
Unicode codes, such as `char_u003B` for the semicolon (`;`), providing a
more flexible approach to customization, for example like this:
```nushell
{
name: move_to_line_end_or_take_history_hint
modifier: shift
keycode: char_u003B # char_;
mode: vi_normal
event: {
until: [
{ send: historyhintcomplete }
{ edit: movetolineend }
]
}
}
```
# User-Facing Changes
Added support for specifying keycodes using Unicode codes, e.g.,
char_u002C (comma - `,`):
```nushell
{
name: <command_name>, # name of the command
modifier: none, # key modifier
keycode: char_u002C, # Unicode code for the comma (',')
mode: vi_normal, # mode in which this binding should work
event: {
send: <action> # action to be performed
}
}
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Maybe we can deprecate `encode new-base64` and `decode new-base64`
first, to make the code clean and simple I'd rather remove the old
`encode base64` and `decode base64` and replace them with the `*
new-base64` commands.
Related PR: https://github.com/nushell/nushell/pull/13428
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- `encode new-base64` --> `encode base64`
- `decode new-base64` --> `decode base64`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
It's a breaking change
# Description
After a `use std *`, the environment variables exported from the
submodules' `export-env` blocks are not available because of #13403.
This causes failures in `log` (currently) and will cause issues in
`dirs` once we stop autoloading it separately.
When the submodules are loaded separately (e.g., `use std/log`),
everything already worked correctly. While this is the preferred way of
doing it, we also want `use std *` to work properly.
This is a workaround for the standard library submodules. It is
definitely not ideal, but it can be removed when and if #13403 is fixed.
For now, we need to duplicate any environment settings in both the
submodules (when loaded with `use std/log`) and in the standard library
itself (when loaded with `use std *`). Again, this should not be
necessary, but currently is because of #13403.
# User-Facing Changes
Bug fix
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
update nushell to the latest reedline
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds another type of length to `str stats`, unicode-width.
```nushell
❯ "\u{ff03}" | str stats
╭───────────────┬───╮
│ lines │ 1 │
│ words │ 0 │
│ bytes │ 3 │
│ chars │ 1 │
│ graphemes │ 1 │
│ unicode-width │ 2 │
╰───────────────┴───╯
❯ "Amélie Amelie" | str stats
╭───────────────┬────╮
│ lines │ 1 │
│ words │ 2 │
│ bytes │ 15 │
│ chars │ 14 │
│ graphemes │ 13 │
│ unicode-width │ 13 │
╰───────────────┴────╯
❯ '今天天气真好' | str stats
╭───────────────┬────╮
│ lines │ 1 │
│ words │ 6 │
│ bytes │ 18 │
│ chars │ 6 │
│ graphemes │ 6 │
│ unicode-width │ 12 │
╰───────────────┴────╯
❯ "Μπορῶ νὰ φάω σπασμένα γυαλιὰ χωρὶς νὰ πάθω τίποτα." | str stats
╭───────────────┬────╮
│ lines │ 1 │
│ words │ 9 │
│ bytes │ 96 │
│ chars │ 50 │
│ graphemes │ 50 │
│ unicode-width │ 50 │
╰───────────────┴────╯
❯ "\n" | str stats
╭───────────────┬───╮
│ lines │ 1 │
│ words │ 0 │
│ bytes │ 1 │
│ chars │ 1 │
│ graphemes │ 1 │
│ unicode-width │ 0 │
╰───────────────┴───╯
```
The idea of this PR came from me wondering if we could replace `#` with
`\u{ff03}` in tables.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This pr does two optimization for the completer:
- Switch `sort_by` to `sort_unstable_by` on `sort_completions` function
since it reduces memory allocation and the orders of the identical
completions are not matter.
- Change `prefix` type from `Vec<u8>` to `&[u8]` to reduce cloning and
memory.
# Description
Fix example in documentation for hide-env
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
* Fixes missing closing parenthesis on `not-in` completion
Also tweaks the others to give them consistent capitalization and
punctuation:
* First word initial-case, other words lower-case
* Exception - Initial-case for "also known as" after slash or inside
parens
* No closing period for any completion help
* Word-smithing on others. E.g., "Mod" is technically "Remainder"
# User-Facing Changes
Operator completions
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
-
# After Submitting
N/A
# Description
Fxes https://github.com/nushell/nupm/issues/102
Not loading `std` at startup has caused an issue with nupm and std where
the `dirs` module name clashes and nupm won't load. This was technically
a preexisting bug that was previously masked. This could have been fixed
(and also should be) by changing the import statement in nupm, but the
potential for collision would remain in other (user) modules.
This PR explicitly sets the relative path for the import statements in
`std/mod.nu` so that there are no collisions.
# User-Facing Changes
Bugfix
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fixes#14000 by once again calling `set_current_dir()`, but doing so
with the `cwd` from the current state, rather than the (previously
removed) argument to `merge_env()`.
# User-Facing Changes
Bug fix
# Tests + Formatting
If this looks good, I'll look at adding a test case for it.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
VSCode OSC 633 needs particular string escaping to function properly. I
missed some escapes during my initial implementation. This PR should
cover the escapes I missed originally.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes a small side-issue in #10977 - If a command flag didn't have a
comment/description, it would still show an unnecessary separator at the
end of the line.
This fixes that, plus uses the `: ` (colon) to separate the flag from
the description. This aligns with the way that named parameters are
handled.
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
This PR addresses #13676 . It adds completions for the operators listed
on https://www.nushell.sh/lang-guide/chapters/operators.html#operators
based on the type of the value before the cursor. Currently, values
created as the output of other operations will not have completions. For
example `(1 + 3)` will not have completions. When operators are
added/removed/updated the completions will have to be adjusted manually.
# User-Facing Changes
- Tab completions for operators
# Tests
Added unit tests to the new completion struct OperationCompletion for
int completions, float completions, and str completions
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
fixes#13518
This pr escapes file/directory names, which start with a dollar sign
since it's being interpreted as a variable.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
@kubouch noticed that the warning message from #13842 when using a
"Shells" alias mentioned `config.nu`, but he's using it in the prompt
which means loading it in `env.nu`. Updated the warning message to:
> ... feature, and to remove this warning, please add the following
> to your startup configuration (typically env.nu or config.nu):
# User-Facing Changes
No change in functionality - More clear instructions, hopefully.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Doc and release notes still to be updated for #13842
Updates Ctrl+p to open the ide_completion menu and otherwise advance to
the "previous" menu item.
Ctrl+n opens the ide_completion_menu and subsequently advances to the
"next" menu item. Ctrl+p should share this behavior for the "previous"
menu item. See nushell/nushell#13946 for detailed discussion.
Tested by building and running nushell without a custom config, falling
back to this default config.
Hi there;
I do think it must be fixed.
I also did improve performance for a fraction in case of header on
border.
I want to believe :) I didn't bench it.
But we didn't cached the width in this code branch before.
Which was causing all data reestimation.
close#13966
cc: @fdncred
Original stated it filled on the left to a width of 5 while showing the
command and output to fill on both sides to a width of 10. Changed
wording of description to match effect of example and displayed result.
# Description
I mean't to do this small change the other day but forgot. We probably
shouldn't be using MAIN_SEPARATOR because **\\*.rs is an illegal glob.
So, update this to just use slash.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Updated summary for commit
[612e0e2](612e0e2160)
- While folks are welcome to read through the entire comments, the core
information is summarized here.
# Description
This PR drastically improves startup times of Nushell by only parsing a
single submodule of the Standard Library that provides the `banner` and
`pwd` commands. All other Standard Library commands and submodules are
parsed when imported by the user. This cuts startup times by more than
60%.
At the moment, we have stopped adding to `std-lib` because every
addition adds a small amount to the Nushell startup time.
With this change, we should once again be able to allow new
functionality to be added to the Standard Library without it impacting
`nu` startup times.
# User-Facing Changes
* Nushell now starts about 60% faster
* Breaking change: The `dirs` (Shells) aliases will return a warning
message that it will not be auto-loaded in the following release, along
with instructions on how to restore it (and disable the message)
* The `use std <submodule> *` syntax is available for convenience, but
should be avoided in scripts as it parses the entire `std` module and
all other submodules and places it in scope. The correct syntax to
*just* load a submodule is `use std/<submodule> *` (asterisk optional).
The slash is important. This will be documented.
* `use std *` can be used for convenience to load all of the library but
still incurs the full loading-time.
* `std/dirs`: Semi-breaking change. The `dirs` command replaces the
`show` command. This is more in line with the directory-stack
functionality found in other shells. Existing users will not be impacted
by this as the alias (`shells`) remains the same.
* Breaking-change: Technically a breaking change, but probably only
impacts maintainers of `std`. The virtual path for the standard library
has changed. It could previously be imported using its virtual path (and
technically, this would have been the correct way to do it):
```nu
use NU_STDLIB_VIRTUAL_DIR/std
```
The path is now simply `std/`:
```nu
use std
```
All submodules have moved accordingly.
# Timings
Comparisons below were made:
* In a temporary, clean config directory using `$env.XDG_CONFIG_HOME =
(mktemp -d)`.
* `nu` was run with a release build
* `nu` was run one time to generate the default `config.nu` (etc.) files
- Otherwise timings would include the user-prompt
* The shell was exited and then restarted several times to get timing
samples
(Note: Old timings based on 0.97 rather than 0.98, but in the range of
being accurate)
| Scenario | `$nu.startup-time` |
| --- | --- |
| 0.97.2
([aaaab8e](aaaab8e070))
Without this PR | 23ms - 24ms |
| This PR with deprecated commands | 9ms - <11ms |
| This PR after deprecated commands are removed in following release |
8ms - <10ms |
| Final PR (remove deprecated), using `--no-std-lib` | 6.1ms to 6.4ms |
| Final PR (remove deprecated), using `--no-config-file` | 3.1ms - 3.6ms
|
| Final PR (remove deprecated), using `--no-config-file --no-std-lib` |
1ms - 1.5ms |
*These last two timings point to the opportunity for further
optimization (see comment in thread below (will link once I write it).*
# Implementation details for future maintenance
* `use std banner` is a ridiculously deceptive call. That call parses
and imports *all* of `std` into scope. Simply replacing it with `use
std/core *` is essentially what saves ~14-15ms. This *only* imports the
submodule with the `banner` and `pwd` commands.
* From the code-comments, the reason that `NU_STDLIB_VIRTUAL_DIR` was
used as a prefix was so that there wouldn't be an issue if a user had a
`./std/mod.nu` in the current directory. This does **not** appear to be
an issue. After removing the prefix, I tested with both a relative
module as well as one in the `$env.NU_LIB_DIRS` path, and in all cases
the *internal* `std` still took precedence.
* By removing the prefix, users can now `use std` (and variants) without
requiring that it already be parsed and in scope.
* In the next release, we'll stop autoloading the `dirs` (shells)
functionality. While this only costs an additional 1-1.5ms, I think it's
better moved to the `config.nu` where the user can optionally remove it.
The main reason is its use of aliases (which have also caused issues) -
The `n`, `p`, and `g` short-commands are valuable real-estate, and users
may want to map these to something else.
For this release, there's an `deprecated_dirs` module that is still
autoloaded. As with the top-level commands, use of these will give a
deprecation warning with instructions on how to handle going forward.
To help with this, moved the aliases to their own submodule inside the
`dirs` module.
* Also sneaks in a small change where the top-level `dirs` command is
now the replacement for `dirs show`
* Fixed a double-import of `assert` in `dirs.nu`
* The `show_banner` step is replaced with simply `banner` rather than
re-importing it.
* A `virtual_path` may now be referenced with either a forward-slash or
a backward-slash on Windows. This allows `use std/<submodule>` to work
on all platforms.
# Performance side-notes:
* Future parsing and/or IR improvements should improve performance even
further.
* While the existing load time penalty of `std-lib` was not noticeable
on many systems, Nushell runs on a wide-variety of hardware and OS
platforms. Slower platforms will naturally see a bigger jump in
performance here. For users starting multiple Nushell sessions
frequently (e.g., `tmux`, Zellij, `screen`, et. al.) it is recommended
to keep total startup time (including user configuration) under ~250ms.
# Tests + Formatting
* All tests are green
* Updated tests:
- Removed the test that confirmed that `std` was loaded (since we
don't).
- Removed the `shells` test since it is not autoloaded. Main `dirs.nu`
functionality is tested through `stdlib-test`.
- Many tests assumed that the library was fully loaded, because it was
(even though we didn't intend for it to be). Fixed those tests.
- Tests now import only the necessary submodules (e.g., `use
std/assert`, rather than `use std assert`)
- Some tests *thought* they were loading `std/log`, but were doing so
improperly. This was masked by the now-fixed "load-everything-into-scope
bug". Local CI would pass due the `$env.NU_LOG_<...>` variables being
inherited from the calling process, but would fail in the "clean" GitHub
CI environment. These tests have also been fixed.
* Added additional tests for the changes
# After Submitting
Will update the Standard Library doc page
# Description
Title says it all, changes `EngineState::get_env_var` to return a
`Option<&'a Value>` instead of an owned `Option<Value>`. This avoids
some unnecessary clones.
I also made a similar change to the `PluginExecutionContext` trait.
# Description
Fixes#13949 where `$env.LAST_EXIT_CODE` was not being set for internal
errors.
# Tests + Formatting
Cannot test due to limitations with the `nu_repl` test bin.
# Description
This fixes an issue with converting to a dataframe when specifying a
struct in the schema. Things like the following now work correctly:
```nushell
[[foo bar]; [{a: "a_0", b:"b_0"} 1] [{a: "a_1", b: "b_1" } 2]] | polars into-df -s {foo: {a: str, b: str}, bar: u8}
```
Bumps [tempfile](https://github.com/Stebalien/tempfile) from 3.12.0 to
3.13.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Stebalien/tempfile/blob/master/CHANGELOG.md">tempfile's
changelog</a>.</em></p>
<blockquote>
<h2>3.13.0</h2>
<ul>
<li>Add <code>with_suffix</code> constructors for easily creating new
temporary files with a specific suffix (e.g., a specific file
extension). Thanks to <a
href="https://github.com/Borgerr"><code>@Borgerr</code></a>.</li>
<li>Update dependencies (fastrand & rustix).</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="a354f8cb11"><code>a354f8c</code></a>
chore: release 3.13.0</li>
<li><a
href="d21b602fa2"><code>d21b602</code></a>
chore: update deps</li>
<li><a
href="d6600da8fc"><code>d6600da</code></a>
Add for <code>with_suffix</code> (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/299">#299</a>)</li>
<li><a
href="19280c5889"><code>19280c5</code></a>
Document current default permissions for tempdirs (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/296">#296</a>)</li>
<li><a
href="c5eac9f690"><code>c5eac9f</code></a>
fix: address clippy unnecessary deref lint in test (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/294">#294</a>)</li>
<li>See full diff in <a
href="https://github.com/Stebalien/tempfile/compare/v3.12.0...v3.13.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [once_cell](https://github.com/matklad/once_cell) from 1.19.0 to
1.20.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/matklad/once_cell/blob/master/CHANGELOG.md">once_cell's
changelog</a>.</em></p>
<blockquote>
<h2>1.20.1</h2>
<ul>
<li>Allow using <code>race</code> module using just
<code>portable_atomic</code>, without <code>critical_section</code> and
provide
better error messages on targets without atomic CAS instruction,
<a
href="https://redirect.github.com/matklad/once_cell/pull/265">#265</a>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="3b9bd9b872"><code>3b9bd9b</code></a>
release 1.20.1</li>
<li><a
href="f61508a632"><code>f61508a</code></a>
Merge pull request <a
href="https://redirect.github.com/matklad/once_cell/issues/265">#265</a>
from taiki-e/portable-atomic</li>
<li><a
href="449e5d7b2d"><code>449e5d7</code></a>
Add portable-atomic feature and disable portable-atomic/critical-section
by d...</li>
<li><a
href="72f7c2e5fa"><code>72f7c2e</code></a>
Merge pull request <a
href="https://redirect.github.com/matklad/once_cell/issues/260">#260</a>
from brodycj/propagate-critical-section-to-portable-a...</li>
<li><a
href="be6b6238fb"><code>be6b623</code></a>
v1.20.0</li>
<li><a
href="f2d95bfe79"><code>f2d95bf</code></a>
update Cargo (dev-)dependencies; update Cargo.lock.msrv</li>
<li><a
href="dd6b5c2909"><code>dd6b5c2</code></a>
ci: fix TEST_BETA with TEMPORARY WORKAROUND in RUSTFLAGS</li>
<li><a
href="7317eae758"><code>7317eae</code></a>
add <code>cargo test --workspace</code> to beginning of TEST task</li>
<li><a
href="bd54bf7aff"><code>bd54bf7</code></a>
fix default-features flag for parking_lot_core in dependencies</li>
<li><a
href="bb70b9e7e6"><code>bb70b9e</code></a>
cargo fmt updates</li>
<li>Additional commits viewable in <a
href="https://github.com/matklad/once_cell/compare/v1.19.0...v1.20.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
As with #13985, credit to @AlifianK for suggesting this in
https://github.com/nushell/nushell.github.io/pull/1572
Updates the example in `wrap` to not use 1-based, sequential numbers.
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
All credit to @AlifianK for suggesting this in the doc repo
(https://github.com/nushell/nushell.github.io/pull/1571).
This updates the merge example to make it more clear by using a
different set of numbers that can't easily be confused with an `index`.
Also changes the `index` to `id` to remove the "magic column name
conversion". (#13780).
# User-Facing Changes
Help/Doc change only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Bumps
[actions-rust-lang/setup-rust-toolchain](https://github.com/actions-rust-lang/setup-rust-toolchain)
from 1.10.0 to 1.10.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/releases">actions-rust-lang/setup-rust-toolchain's
releases</a>.</em></p>
<blockquote>
<h2>v1.10.1</h2>
<ul>
<li>Fix problem matcher for rustfmt output.
The format has changed since <a
href="https://redirect.github.com/rust-lang/rustfmt/pull/5971">rust-lang/rustfmt#5971</a>
and now follows the form "filename:line".
Thanks to <a
href="https://github.com/0xcypher02"><code>@0xcypher02</code></a> for
pointing out the problem.</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/compare/v1...v1.10.1">https://github.com/actions-rust-lang/setup-rust-toolchain/compare/v1...v1.10.1</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/blob/main/CHANGELOG.md">actions-rust-lang/setup-rust-toolchain's
changelog</a>.</em></p>
<blockquote>
<h2>[1.10.1] - 2024-10-01</h2>
<ul>
<li>Fix problem matcher for rustfmt output.
The format has changed since <a
href="https://redirect.github.com/rust-lang/rustfmt/pull/5971">rust-lang/rustfmt#5971</a>
and now follows the form "filename:line".
Thanks to <a
href="https://github.com/0xcypher02"><code>@0xcypher02</code></a> for
pointing out the problem.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="11df97af8e"><code>11df97a</code></a>
Update the rustfmt problem matcher</li>
<li>See full diff in <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/compare/v1.10.0...v1.10.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
In the PR #13832 I used some newtypes for the old IDs. `SpanId` and
`RegId` already used newtypes, to streamline the code, I made them into
the same style as the other marker-based IDs.
Since `RegId` should be a bit smaller (it uses a `u32` instead of
`usize`) according to @devyn, I made the `Id` type generic with `usize`
as the default inner value.
The question still stands how `Display` should be implemented if even.
# User-Facing Changes
Users of the internal values of `RegId` or `SpanId` have breaking
changes but who outside nushell itself even uses these?
# After Submitting
The IDs will be streamlined and all type-safe.
# Description
This PR allows bools to be type checked against each other.
I looked for test and maybe we don't have any for type checked math
stuff. I didn't see any.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
closes https://github.com/nushell/nushell/issues/13759 and fixes some
odd behavior from the human-date-parser crate.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is related #11950 and serves as another potential fix alongside
rolling it back with https://github.com/nushell/nushell/pull/13959. The
idea here is to try and properly setup the input and output console
modes. I searched through a log of GitHub code to come up with this,
including deno, wezterm, conpty, among others. It seems to work but it
would be great if someone else would be able to test. I added comments
from the consoleapi.h from windows to know what the other flags are in
case we need to make other changes.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
In this PR I replaced most of the raw usize IDs with
[newtypes](https://doc.rust-lang.org/rust-by-example/generics/new_types.html).
Some other IDs already started using new types and in this PR I did not
want to touch them. To make the implementation less repetitive, I made
use of a generic `Id<T>` with marker structs. If this lands I would try
to move make other IDs also in this pattern.
Also at some places I needed to use `cast`, I'm not sure if the type was
incorrect and therefore casting not needed or if actually different ID
types intermingle sometimes.
# User-Facing Changes
Probably few, if you got a `DeclId` via a function and placed it later
again it will still work.
# Description
Old code was comparing remaining positional arguments with total number
of arguments, where it should've compared remaining positional with
with remaining arguments of any kind. This means that if a function was
given too few arguments, `calculate_end_span` would believe that it
actually had too many arguments, since after parsing the first few
arguments, the number of remaining arguments needed were fewer than the
*total* number of arguments, of which we had used several.
Fixes#9072
Fixes: https://github.com/nushell/nushell/issues/13930
Fixes: https://github.com/nushell/nushell/issues/12069
Fixes: https://github.com/nushell/nushell/issues/8385
Extracted from #10381
## Bonus
It also improves the error handling on missing positional arguments
before keywords (no longer crashing since #9851). Instead of just giving
the keyword to the parser for the missing positional, we give an
explicit error about a missing positional argument. I would like better
descriptions than "missing var_name" though, but I'm not sure if that's
available without
Old error
```
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #1:1:1]
1 │ let = if foo
· ┬
· ╰── expected valid variable name
╰────
```
New error
```
Error: nu::parser::missing_positional
× Missing required positional argument.
╭─[entry #18:1:1]
1 │ let = foo
· ┬
· ╰── missing var_name
╰────
help: Usage: let <var_name> = <initial_value>
```
# User-Facing Changes
The program `alias = = =` is no longer accepted by the parser
# Description
@cptpiepmatz and I ran into a problem where `toolkit check pr` and
`toolkit clippy --verbose` wouldn't work. I tracked it down to me using
`cargo-completions.nu` out of the nu_scripts repo. It was redefining
`cargo clippy`. The fix was to ensure that all `cargo` commands in
`toolkit.nu` use the external `^cargo`.
Specifically, the problem with `cargo clippy` in `cargo-completions.nu`
is it didn't seem to allow `-- -D blah` type parameters.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Introduces a new flag `--truncate-ragged-lines` for `polars open` that
will truncate lines that are longer than the schema.
# User-Facing Changes
- Introduction of the flag `--truncate-ragged-lines` for `polars open`
# Description
This request exposes the prelude::polars::len expression. It is ended
for doing fast select count(*) like operations:
<img width="626" alt="Screenshot 2024-09-26 at 18 14 45"
src="https://github.com/user-attachments/assets/74285fc6-f99c-46e0-9226-9a7d41738d78">
# User-Facing Changes
- Introduction of the `polars len` command
# Description
Implements #13669
When nu is started for the first time, the directory represented by
`$nu.default-config-dir` typically will not exist. In this case, Nushell
will create the directory. It will then detect that either or both
`config.nu`/`env.nu` don't exist and offer to create them.
(Existing behavior) If the user declines, the directory will still be
created (since the history file lives there as well). The
`default_config.nu` and `default_env.nu` will be loaded.
On subsequent launches, as long as the config directory continues to
exist, the user will not be prompted to recreate the config files.
Nushell will behave as if the user answered "N" to the prompt in that
`default_config.nu` and `default_env.nu` will be used.
The user can still create a `config.nu` or `env.nu` at any point, and
that will be used. In that case, `default_config.nu` and/or
`default_env.nu` will no longer be loaded (unless and until #13671 is
implemented).
# User-Facing Changes
User will no longer be prompted to create config files if they are
missing so long as the config directory exists.
## Before this change:
1. Nushell starts for the first time
2. The directory where config files are stored does not exist
3. The config files do not exist
* User is asked whether they want to create `env.nu`
- User says, "Y", `default_env.nu` is copied to the directory as
`env.nu` (and directory is created if needed)
- User says, "n", `default_env.nu` is loaded, but no file on the
filesystem is created.
* User is asked whether they want to create `config.nu`
- User says, "Y", `default_config.nu` is copied to the directory as
`config.nu` (and directory is created if needed)
- User says, "n", `default_config.nu` is loaded, but no file on the
filesystem is created.
4. The next time `nu` is run, if either file is missing, the user will
be prompted again for that file.
## After this change:
Steps 1 - 3 remains the same.
4. The next time `nu` is run, we check if the directory exists. If so:
5. Do not prompt user to create any missing files **(New Behavior)**
6. `$nu.default-config-dir/env.nu` exists?
* Yes? Use it. (Normal behavior)
* No? Evaluate `default_env.nu`. (Normal behavior)
* No file is created on the filesystem
7. `$nu.default-config-dir/config.nu` exists?
* Yes? Use it. (Normal behavior)
* No? Evaluate `default_config.nu` (Normal behavior)
* No file is created on the filesystem
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
This behavior isn't currently mentioned in the configuration doc. I'll
probably hold off on changing anything in the doc until #13671 is
implemented. Regardless, given the timing, this won't make it into a
release for at least 4 weeks.
Notable this gets https://github.com/bytecodealliance/rustix/pull/1147
which makes things work on Android again.
Without this update latest `0.98.0` release gets stuck in a loop
outputting the below error due to the `TCGETS2` usage:
> Error: Os { code: 13, kind: PermissionDenied, message: "Permission
denied" }
# Description
After PR https://github.com/nushell/nushell/pull/12953, LS_COLORS
coloring broke in the `grid` and `ls` commands because the full path to
the files were not available. This PR restores the coloring.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR sets the current working directory to the location of the
Nushell executable at startup, using `std::env::set_current_dir()`. This
is desirable because after PR
https://github.com/nushell/nushell/pull/12922, we no longer change our
current working directory even after `cd` is executed, and some OS might
lock the directory where Nushell started.
The location of the Nushell executable is chosen because it cannot be
removed while Nushell is running anyways, so we don't have to worry
about OS locking it.
This PR has the side effect that it breaks buggy command even harder.
I'll keep this PR as a draft until these commands are fixed, but it
might be helpful to pull this PR if you're working on fixing one of
those bugs.
---------
Co-authored-by: Devyn Cairns <devyn.cairns@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Fixesnushell/nushell#13891
# Description
`input listen` now respects `$env.config.use_kitty_protocol`
This is essentially a copy-paste from `keybindings listen` where it was
already implemented.
# User-Facing Changes
`input listen` now respects `$env.config.use_kitty_protocol`
# Tests + Formatting
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR updates the `folder_depth` algorithm in order to make `glob` a
bit faster. The algorithm works like this. Since `folder_depth` is
always used we need to set it to a value. If the glob pattern contains
`**` then make `folder_depth` `usize::MAX`. If `--depth` is not
provided, make it 1, otherwise use the provided value.
closes#13914
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes a couple panics:
```
> {} | inspect
Error: x Main thread panicked.
|-> at crates/nu-command/src/debug/inspect_table.rs:87:15
`-> attempt to divide by zero
```
```
> {} | explore
# see an empty column, press Down
Error: x Main thread panicked.
|-> at crates/nu-explore/src/views/cursor/mod.rs:39:9
`-> attempt to subtract with overflow
```
# User-Facing Changes
`{} | inspect` now outputs an empty table:
```
╭─────────────┬────────╮
│ description │ record │
├─────────────┴────────┤
│ │
├──────────────────────┤
```
`{} | explore` opens the help menu.
Both match the empty list behavior.
# Tests
I'm not sure how to test `explore`, as it waits for interaction.
# Description
This PR updates the shell_integration defaults so that they work as
described in default_config.nu even when there is no config.nu file.
closes#13924
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates nushell to the latest reedline commit 660a5074
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tries to allow the `ls` command to use multiple threads if so
specified. The reason why you'd want to use threads is if you notice
`ls` taking a long time. The one place I see that happening is from WSL.
I'm not sure how real-world this test is but you can see that this
simple `ls` of a folder with length takes a while 9366 ms. I've run this
test many times and it ranges from about 15 seconds to about 10 seconds.
But with the `--threads` parameter, it takes less time, 2744ms in this
screenshot.
The only way forward I could find was to _always_ use threading and
adjust the number of threads based on if the user provides a flag. That
seemed the easiest way to do it after applying @devyn's interleave
advice.
No feelings hurt if this doesn't land. It's more of an experiment but I
think it has potential.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
hi hi, this makes the parsing of modifier key combos in config more
general, and adds support for additional kitty keyboard protocol
modifiers. It seems that support for [kitty
keys](https://sw.kovidgoyal.net/kitty/keyboard-protocol) had already
been added to nushell in https://github.com/nushell/nushell/pull/10540,
and this was the only missing piece to making them available in
keybindings.
# User-Facing Changes
- keybindings in config can include the super, hyper and meta modifiers
(e.g. `modifier: super`, `modifier: shift_super`, etc.), and these
modifiers will work in supporting terminals (kitty, foot, wezterm,
alacritty...)
- all permutations of snake_cased modifier combinations now behave
equivalently for the purpose of describing keybindings in config (e.g.
`control_alt_shift` was previously supported where `shift_control_alt`
was a config error — now they're the same)
# Tests
None of this looks to be tested at the moment. I only found a smoke test
under the nu-cli crate, and I couldn't break tests elsewhere by stuffing
around with modifier handling. Works on my machine, though! ✨🌈
# Description
Instead of handling a foreground process being stopped in any way, we
were simply ignoring SIGTSTP (which the terminal usually sends to the
foreground process group when Ctrl-Z is pressed), and propagating this
to our foreground children. This works for most processes, but it
generally fails for applications which put the terminal in raw mode[1]
and implement their own suspension mechanism (typically TUI apps like
helix[2], neovim[3], top[4] or amp[5]). In these cases, triggering
suspension within the app results in the terminal getting blocked, since
the application is waiting for a SIGCONT, while nushell is waiting for
it to exit.
Fix this by unblocking SIGTSTP for our foreground children (neovim,
helix and probably others send this to themselves while trying to
suspend), and displaying the following message whenever one of them gets
stopped:
nushell currently does not support background jobs
press any key to continue
Pressing any key will then send SIGCONT to the child's process group and
resume waiting.
This fix is probably going to be superseded by a proper background job
implementation (#247) at some point, but for now it's better than
completely blocking the terminal.
[1]
https://docs.rs/crossterm/latest/crossterm/terminal/index.html#raw-mode
[2] https://helix-editor.com/
[3] https://neovim.io/
[4] https://man7.org/linux/man-pages/man1/top.1.html
[5] https://amp.rs/
- fixes#1038
- fixes#7335
- fixes#10335
# User-Facing Changes
While any foreground process is running, Ctrl-Z is no longer ignored.
Instead, the message described above is displayed, and nushell waits for
a key to be pressed.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
From [Discord
today](https://discord.com/channels/601130461678272522/729071784321876040/1286904159047778316),
`into value` isn't classified with `conversions` like the other `into
...` subcommands. I think this is correct, since it's a `table->table`
operation, so it's a filter that has the side effect of (potentially)
converting (via inference) cell values.
But we should at least have some search terms that help here, so this PR
adds *"conversion"* and *"convert"* to the command.
# User-Facing Changes
`help -f conversion` will return `into value`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fixes: #13662
I don't think nushell need to parse and keep nested quote on external
command arguments. Some nested quote is safe to removed. After the pr,
nushell will behave more likely to bash.
# User-Facing Changes
#### Before
```
> ^echo {a:1,b:'c',c:'d'}
{a:1,b:c',c:'d}
```
#### After
```
> ^echo {a:1,b:'c',c:'d'}
{a:1,b:c,c:d}
```
# Tests + Formatting
Added some tests to cover the behavior
# Description
Partialy addresses #13868. `try` does not catch non-zero exit code
errors from the last command in a pipeline if the result is assigned to
a variable using `let` (or `mut`).
This was fixed by adding a new `OutDest::Value` case. This is used when
the pipeline is in a "value" position. I.e., it will be collected into a
value. This ended up replacing most of the usages of `OutDest::Capture`.
So, this PR also renames `OutDest::Capture` to `OutDest::PipeSeparate`
to better fit the few remaining use cases for it.
# User-Facing Changes
Bug fix.
# Tests + Formatting
Added two tests.
# Description
This plugin fixes the ability to do `plugin add nu_plugin_polars` and
have nushell look in NU_PLUGINS_DIR to find the plugin and add it.
closes#13040
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Add content type metadata to the output of `view source`.
I've gone along with the mime type used [here][xdg], but this shouldn't
be merged until there is consensus #13858.
`to nuon`'s output has content type `application/x-nuon`
[xdg]:
https://gitlab.freedesktop.org/xdg/shared-mime-info/-/merge_requests/231
# User-Facing Changes
Combined with `metadata access`, allows richer display_output hooks.
Might be useful with other commands that make use of content_type like
the `http` commands.
# Description
This adds support for reading and writing binary types in the polars
commands.
The `BinaryOffset` type can be read into a Nushell native `Value` type
no problem, but unfortunately this is a lossy conversion, as there's
no Nushell-native semantic equivalent to the fixed size binary type
in Arrow.
# User-Facing Changes
`polars open` and `polars save` now work with binary types.
# Description
Similar to #13870 (thanks @WindSoilder), this PR adds a boolean which
determines whether to ignore any errors from an external command. This
is in order to fix#13876. I.e., `do -p` does not wait for externals to
complete before continuing.
# User-Facing Changes
Bug fix.
# Tests + Formatting
Added a test.
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.24.5 to
1.24.6.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.24.6</h2>
<h2>[1.24.6] - 2024-09-16</h2>
<h3>Fixes</h3>
<ul>
<li>Respect negation (<code>!</code>) in
<code>extend-exclude</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.24.6] - 2024-09-16</h2>
<h3>Fixes</h3>
<ul>
<li>Respect negation (<code>!</code>) in
<code>extend-exclude</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8e6a4285bc"><code>8e6a428</code></a>
chore: Release</li>
<li><a
href="cab7c3c4a5"><code>cab7c3c</code></a>
docs: Update changelog</li>
<li><a
href="c4a6592239"><code>c4a6592</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1100">#1100</a>
from epage/invert</li>
<li><a
href="ad3538f719"><code>ad3538f</code></a>
refactor(cli): Switch from Overrides to Gitignore</li>
<li><a
href="d9b55f966c"><code>d9b55f9</code></a>
fix(cli): Allow negative expressions in extend-exclude</li>
<li><a
href="777cf42dc2"><code>777cf42</code></a>
refactor(cli): Be explicit in overrides</li>
<li><a
href="0e8148fbbd"><code>0e8148f</code></a>
test(cli): Show inverted extend-exclude behavior</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.24.5...v1.24.6">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [shadow-rs](https://github.com/baoyachi/shadow-rs) from 0.34.0 to
0.35.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/baoyachi/shadow-rs/releases">shadow-rs's
releases</a>.</em></p>
<blockquote>
<h2>v0.35.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Update time crate by <a
href="https://github.com/diniamo"><code>@diniamo</code></a> in <a
href="https://redirect.github.com/baoyachi/shadow-rs/pull/182">baoyachi/shadow-rs#182</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/diniamo"><code>@diniamo</code></a> made
their first contribution in <a
href="https://redirect.github.com/baoyachi/shadow-rs/pull/182">baoyachi/shadow-rs#182</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.34.0...v0.35.0">https://github.com/baoyachi/shadow-rs/compare/v0.34.0...v0.35.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="4358b4a094"><code>4358b4a</code></a>
Update Cargo.toml</li>
<li><a
href="2851d669dd"><code>2851d66</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/182">#182</a>
from diniamo/update-time</li>
<li><a
href="e77dcef733"><code>e77dcef</code></a>
Update time crate</li>
<li>See full diff in <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.34.0...v0.35.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps
[unicode-segmentation](https://github.com/unicode-rs/unicode-segmentation)
from 1.11.0 to 1.12.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="9e3f88c06c"><code>9e3f88c</code></a>
Publish 1.12</li>
<li><a
href="187d8b8e84"><code>187d8b8</code></a>
Support Unicode 16.0.0 (<a
href="https://redirect.github.com/unicode-rs/unicode-segmentation/issues/140">#140</a>)</li>
<li><a
href="0f55f70b44"><code>0f55f70</code></a>
Fix unwrap panic in next_boundary() (<a
href="https://redirect.github.com/unicode-rs/unicode-segmentation/issues/137">#137</a>)</li>
<li><a
href="0fa7148d3b"><code>0fa7148</code></a>
Merge pull request <a
href="https://redirect.github.com/unicode-rs/unicode-segmentation/issues/138">#138</a>
from cardigan1008/issue-overflow</li>
<li><a
href="164f787b72"><code>164f787</code></a>
fmt</li>
<li><a
href="cbb87720d2"><code>cbb8772</code></a>
fix: arithmetic overflow</li>
<li><a
href="2081c29df7"><code>2081c29</code></a>
Merge pull request <a
href="https://redirect.github.com/unicode-rs/unicode-segmentation/issues/136">#136</a>
from Jules-Bertholet/std-tables</li>
<li><a
href="e96ec2eb6c"><code>e96ec2e</code></a>
Use stdlib alphabetic and numeric character tables</li>
<li><a
href="592ce00a3f"><code>592ce00</code></a>
Merge pull request <a
href="https://redirect.github.com/unicode-rs/unicode-segmentation/issues/134">#134</a>
from Jules-Bertholet/fix</li>
<li><a
href="dce3a345cc"><code>dce3a34</code></a>
Add comments to <code>handle_incb_consonant</code></li>
<li>Additional commits viewable in <a
href="https://github.com/unicode-rs/unicode-segmentation/compare/v1.11.0...v1.12.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [tango-bench](https://github.com/bazhenov/tango) from 0.5.0 to
0.6.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="425ddb93be"><code>425ddb9</code></a>
v0.6.0</li>
<li><a
href="0da1bf5f39"><code>0da1bf5</code></a>
Fixing incorrect path to gnuplot graph</li>
<li><a
href="6b084ea189"><code>6b084ea</code></a>
Limit visibility of internal type</li>
<li><a
href="4ea09e2216"><code>4ea09e2</code></a>
Solo support (<a
href="https://redirect.github.com/bazhenov/tango/issues/35">#35</a>)</li>
<li><a
href="abd888cbc0"><code>abd888c</code></a>
toolchain file added</li>
<li><a
href="2d722474ff"><code>2d72247</code></a>
Async poc (dev-branch) (<a
href="https://redirect.github.com/bazhenov/tango/issues/34">#34</a>)</li>
<li><a
href="5e236aec24"><code>5e236ae</code></a>
Simplify code</li>
<li><a
href="40569a9c98"><code>40569a9</code></a>
Documentation added</li>
<li><a
href="5908909fb2"><code>5908909</code></a>
README updated</li>
<li><a
href="6fb1ebd6f6"><code>6fb1ebd</code></a>
Gnuplot support (<a
href="https://redirect.github.com/bazhenov/tango/issues/33">#33</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/bazhenov/tango/compare/v0.5.0...v0.6.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
If no input is provided, will import all history items from existing history in the other format: if current history is stored in sqlite, it will store it in plain text and vice versa.
Note that history item IDs are ignored when importing from file."#
ShellError::CantConvert{to_type: format!("could not parse as datetime using format '{}'",dt.0),from_type: reason.to_string(),span: head,help: Some("you can use `into datetime` without a format string to enable flexible parsing".to_string())},
@ -503,7 +509,14 @@ mod tests {
}
#[test]
#[ignore]
fntakes_a_date_format_without_timezone(){
// Ignoring this test for now because we changed the human-date-parser to use
// the users timezone instead of UTC. We may continue to tweak this behavior.
// Another hacky solution is to set the timezone to UTC in the test, which works
// on MacOS and Linux but hasn't been tested on Windows. Plus it kind of defeats
.switch("instructions","Collect IR instructions",Some('i'))
.switch("lines","Collect line numbers",Some('l'))
.named(
"max-depth",
@ -48,37 +46,52 @@ impl Command for DebugProfile {
}
fnextra_description(&self)-> &str{
r#"The profiler profiles every evaluated pipeline element inside a closure, stepping into all
r#"The profiler profiles every evaluated instruction inside a closure, stepping into all
commands calls and other blocks/closures.
The output can be heavily customized. By default, the following columns are included:
- depth : Depth of the pipeline element. Each entered block adds one level of depth. How many
- depth : Depth of the instruction. Each entered block adds one level of depth. How many
blocks deep to step into is controlled with the --max-depth option.
- id : ID of the pipeline element
- parent_id : ID of the parent element
- source : Source code of the pipeline element. If the element has multiple lines, only the
first line is used and `...` is appended to the end. Full source code can be shown
with the --expand-source flag.
- duration_ms : How long it took to run the pipeline element in milliseconds.
- (optional) span : Span of the element. Can be viewed via the `view span` command. Enabled with
the --spans flag.
- (optional) expr : The type of expression of the pipeline element. Enabled with the --expr flag.
- (optional) output : The output value of the pipeline element. Enabled with the --values flag.
- id : ID of the instruction
- parent_id : ID of the instruction that created the parent scope
- source : Source code that generated the instruction. If the source code has multiple lines,
only the first line is used and `...` is appended to the end. Full source code can
be shown with the --expand-source flag.
- pc : The index of the instruction within the block.
- instruction : The pretty printed instruction being evaluated.
- duration_ms : How long it took to run the instruction in milliseconds.
- (optional) span : Span associated with the instruction. Can be viewed via the `view span`
command. Enabled with the --spans flag.
- (optional) output : The output value of the instruction. Enabled with the --values flag.
To illustrate the depth and IDs, consider `debug profile { if true { echo 'spam' } }`. There are
three pipeline elements:
To illustrate the depth and IDs, consider `debug profile { do { if true { echo 'spam' } } }`. A unique ID is generated each time an instruction is executed, and there are two levels of depth:
depth id parent_id
0 0 0 debug profile { do { if true { 'spam' } } }
11 0 if true { 'spam' }
2 21 'spam'
```
depth id parent_id source pc instruction
0 0 0 debug profile { do { if true { 'spam' } } } 0 <start>
"Any pipeline input given to this command is passed to the closure. Note that streaming inputs may affect timing results, and it is recommended to add a `collect` command before this if the input is a stream.
This command will bubble up any errors encountered when running the closure. The return pipeline of the closure is collected into a value and then discarded."
description: "Time a closure containing a pipeline",
example: "timeit { open some_file.txt | split chars }",
result: None,
},
]
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
