* Factor out `reduce_rows_f32` from common.cuh
This increases iteration cycle speed by not having to recompile
every kernel all the time
* Hide memory-latency by loop unrolling in reduce_rows_f32
* Further optimizations to `reduce_rows_f32`
1. Increase threadblock size to better hide latency of memory requests.
As a consequence of bigger threadblocks, do 2-step summation, using
shared memory to communicate results between invocations
2. Use sum_temp array to reduce waits on sum
3. Adjust num_unroll to reflext bigger threadblock
4. Improve default block_dims, increase support for more block_dims
* Add perf tests for `reduce_rows_f32` kernel
* Add heuristic to toggle 128/512 threads based on sm count
Break even point was the minimum of the following multiples.
| GPU Model | Nrow SM Count Multiple |
| ----------- | ----------- |
| RTX 4000 SFF ADA | 2.0x |
| RTX 6000 ADA | 2.5x |
| RTX PRO 6000 Blackwell Max-Q | 3.04x |
| RTX PRO 4500 Blackwell | 3.15x |
* Ensure perf gains also for small ncols and large nrows
Alternative to this, one could have also made the number of unrollings
template-able, but that would require compiling the kernel multiple
times, increasing binary size unnecessarily
* Modify perf and unit-tests
* Apply auto-formatting by clang
* Fix CI build failure
See https://github.com/ggml-org/llama.cpp/actions/runs/16798370266/job/47573716079?pr=15132#step:7:486
Building with VS generator worked though.
* Remove sm_count property from `ggml_backend_cuda_context`
Requested by @JohannesGaessler, and should fix remaining CI issues as a
side-effect
* Add CUB-based implementation for GGML_OP_MEAN
Currently this branch is only executed for nrows==1
* Add heuristics to execute CUB branch only when it brings perf
Heuristics were determined on the following HW:
* RTX 4000 SFF ADA
* RTX 6000 ADA
* RTX PRO 6000 Blackwell Max-Q
* RTX PRO 4500 Blackwell
* Add unit-test for CUB-based mean
Tests should run with CUDA Graphs enabled per default on NVGPUs
* Rename `USE_CUB` to `GGML_CUDA_USE_CUB`
Suggested by @JohannesGaessler
* Unindent Preprocessor directives
See
https://github.com/ggml-org/llama.cpp/pull/15132#discussion_r2269213506
* ggml-rpc: chunk send()/recv() to avoid EINVAL for very large tensors over RPC (macOS & others). Fixes#15055
* ggml-rpc: rename RPC_IO_CHUNK->MAX_CHUNK_SIZE, use std::min() for cap, switch to GGML_LOG_ERROR, handle 0-length send/recv
* rpc: drop n==0 special case in send_data(); retry in loop per review
* rpc: remove trailing whitespace in send_data()
---------
Co-authored-by: Shinnosuke Takagi <nosuke@nosukenoMacBook-Pro.local>
* cuda: refactored ssm_scan to use CUB
* fixed compilation error when when not using CUB
* assign L to constant and use size_t instead of int
* deduplicated functions
* change min blocks per mp to 1
* Use cub load and store warp transpose
* suppress clang warning
* feat(cann): add optional support for ACL Graph execution
This commit adds support for executing ggml computational graphs using
Huawei's ACL graph mode via the USE_CANN_GRAPH flag. The support can be
enabled at compile time using the CMake option:
-DUSE_CANN_GRAPH=ON
By default, ACL graph execution is **disabled**, and the fallback path
uses node-by-node execution.
Key additions:
- CMake option to toggle graph mode
- Graph capture and execution logic using
- Tensor property matching to determine whether graph update is required
- Safe fallback and logging if the environment variable LLAMA_SET_ROWS
is unset or invalid
This prepares the backend for performance improvements in repetitive graph
execution scenarios on Ascend devices.
Signed-off-by: noemotiovon <757486878@qq.com>
* Fix review comments
Signed-off-by: noemotiovon <757486878@qq.com>
* remane USE_CANN_GRAPH to USE_ACL_GRAPH
Signed-off-by: noemotiovon <757486878@qq.com>
* fix typo
Signed-off-by: noemotiovon <757486878@qq.com>
---------
Signed-off-by: noemotiovon <757486878@qq.com>
* cmake: Add GGML_BACKEND_DIR option
This can be used by distributions to specify where to look for backends
when ggml is built with GGML_BACKEND_DL=ON.
* Fix phrasing
- Increase tile size for k-quants, to match non-k-quants
- Choose more carefully between large and medium tiles, considering how it
interacts with split_k
- Allow larger/non-power of two split_k, and make the splits a multiple of 256
- Use split_k==3 to when >1/2 and <=2/3 of the SMs would hae been used
* vulkan: optimizations for direct convolution
- Empirically choose a better tile size. Reducing BS_K/BS_NPQ helps fill
the GPU. The new size should be amenable to using coopmat, too.
- Fix shmem bank conflicts. 16B padding should work with coopmat.
- Some explicit loop unrolling.
- Skip math/stores work for parts of the tile that are OOB.
- Apply fastdiv opt.
- Disable shuffles for NV.
* Three tiles sizes for CONV_2D, and a heuristic to choose
* reallow collectives for pre-Turing
* make SHMEM_PAD a spec constant
* fixes for intel perf - no shmem padding, placeholder shader core count
* shader variants with/without unrolling
* 0cc4m's fixes for AMD perf
Co-authored-by: 0cc4m <picard12@live.de>
---------
Co-authored-by: 0cc4m <picard12@live.de>
* Initial Q2_K Block Interleaving Implementation
* Addressed review comments and clean up of the code
* Post rebase fixes
* Initial CI/CD fixes
* Update declarations in arch-fallback.h
* Changes for GEMV Q2_K in arch-fallback.h
* Enable repacking only on AVX-512 machines
* Update comments in repack.cpp
* Address q2k comments
---------
Co-authored-by: Manogna-Sree <elisetti.manognasree@multicorewareinc.com>
This is useful for testing for regressions on GCN with CDNA hardware.
With GGML_HIP_MMQ_MFMA=Off and GGML_CUDA_FORCE_MMQ=On we can conveniently test the GCN code path on CDNA. As CDNA is just GCN renamed with MFMA added and limited use ACC registers, this provides a good alternative for regression testing when GCN hardware is not available.
llvm with the amdgcn target dose not support unrolling loops with conditional break statements, when those statements can not be resolved at compile time. Similar to other places in GGML lets simply ignore this warning.
