Go from the ill-defined `enable/disable` pairs to `.use_...` builders
This alleviates unclear properties when the underlying enhancements are
enabled. Now they are enabed when entering `Reedline::read_line` and
disabled when exiting that.
Furthermore allow setting `$env.config.use_kitty_protocol` to have an
effect when toggling during runtime. Previously it was only enabled when
receiving a value from `config.nu`. I kept the warning code there to not
pollute the log. We could move it into the REPL-loop if desired
Not sure if we should actively block the enabling of `bracketed_paste`
on Windows. Need to test what happens if it just doesn't do anything we
could remove the `cfg!` switch. At least for WSL2 Windows Terminal
already supports bracketed paste. `target_os = windows` is a bad
predictor for `conhost.exe`.
Depends on https://github.com/nushell/reedline/pull/659
(pointing to personal fork)
Closes https://github.com/nushell/nushell/issues/10982
Supersedes https://github.com/nushell/nushell/pull/10998
# Description
Fixes: #11033
Sorry for the issue, it's a regression which introduce by this pr:
#10456.
And this pr is going to fix it.
About the change: create a new field named `type_annotated` for
`Arg::Flag` and `Arg::Signature` instead of `arg_explicit_type`
variable.
When we meet a type in `TypeMode`, we set `type_annotated` field of the
argument to be true, then we know that if the arg have a annotated type
easily
# Description
Refactors the `flatten` command to remove a bunch of cloning. This was
down by passing ownership of the `Value` to `flat_value`, removing the
lifetime on `TableInside`, and using `Vec<Record>` in `FlattenedRows`
instead of a pair of `Vec` of columns and values.
For the quick benchmark below, it seems to be twice as fast now:
```nushell
let data = ls crates | where type == dir | each { ls $'($in.name)/**/*' }
timeit { for x in 0..1000 { $data | flatten } }
```
This took 550ms on v0.86.0 and only 230ms on this PR.
But considering that
```nushell
timeit { for x in 0..1000 { $data } }
```
takes 200ms on both versions, then the difference for `flatten` itself
is really 250ms vs 30ms -- 8x faster.
Provides support for reading Polars structs. This allows opening of
supported files (jsonl, parquet, etc) that contain rows with structured
data.
The following attached json lines
file([receipts.jsonl.gz](https://github.com/nushell/nushell/files/13311476/receipts.jsonl.gz))
contains a customer column with structured data. This json lines file
can now be loaded via `dfr open` and will render as follows:
<img width="525" alt="Screenshot 2023-11-09 at 10 09 18"
src="https://github.com/nushell/nushell/assets/56345/4b26ccdc-c230-43ae-a8d5-8af88a1b72de">
This also addresses some cleanup of date handling and utilizing
timezones where provided.
This pull request only addresses reading data from polars structs. I
will address converting nushell data to polars structs in a future
request as this change is large enough as it is.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
Generally elide a bunch of unnecessary clones. Both globally stopping to
clone the whole input data in a bunch of places where we need to read it
but also some minor places where we currently cloned.
As part of that, we can make the overwriting with `keep-all` and
`keep-last` inplace so the items don't need to be removed and repushed
to the record.
# Benchmarking
```nu
timeit { scope commands | transpose -r }
```
Before ~24 ms now just ~5 ms
# User-Facing Changes
This can change the order of apperance in the transposed record with
`--keep-last`/`--keep-all`. Now the
order is determined by the first appearance and not by the last
appearance in the ingoing columns.
This mirrors the behavior when not passed `keep-all` or `keep-last`.
# Tests + Formatting
Sadly the `transpose` command is so far undertested for more complex
operations.
# Description
This PR refactors `drop columns` and fixes issues #10902 and #6846.
Tables with "holes" are now handled consistently, although still
somewhat awkwardly. That is, the columns in the first row are used to
determine which columns to drop, meaning that the columns displayed all
the way to the right by `table` may not be the columns actually being
dropped. For example, `[{a: 1}, {b: 2}] | drop column` will drop column
`a` instead of `b`. Before, this would give a list of empty records.
# User-Facing Changes
`drop columns` can now take records as input.
# Description
Compatible with `Vec::truncate` and `indexmap::IndexMap::truncate`
Found useful in #10903 for `drop column`
# Tests + Formatting
Doctest with the relevant edge-cases
# Description
Add an extension trait `IgnoreCaseExt` to nu_utils which adds some case
insensitivity helpers, and use them throughout nu to improve the
handling of case insensitivity. Proper case folding is done via unicase,
which is already a dependency via mime_guess from nu-command.
In actuality a lot of code still does `to_lowercase`, because unicase
only provides immediate comparison and doesn't expose a `to_folded_case`
yet. And since we do a lot of `contains`/`starts_with`/`ends_with`, it's
not sufficient to just have `eq_ignore_case`. But if we get access in
the future, this makes us ready to use it with a change in one place.
Plus, it's clearer what the purpose is at the call site to call
`to_folded_case` instead of `to_lowercase` if it's exclusively for the
purpose of case insensitive comparison, even if it just does
`to_lowercase` still.
# User-Facing Changes
- Some commands that were supposed to be case insensitive remained only
insensitive to ASCII case (a-z), and now are case insensitive w.r.t.
non-ASCII characters as well.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Replaces the only usage of `Value::follow_cell_path_not_from_user_input`
with some `Record::get`s.
# User-Facing Changes
Breaking change for `nu-protocol`, since
`Value::follow_cell_path_not_from_user_input` was deleted.
Nushell now reports errors for when environment conversions are not
closures.
# Description
This is pretty complementary/orthogonal to @IanManske 's changes to
`Value` cellpath accessors in:
- #10925
- to a lesser extent #10926
## Steps
- Use `R.remove` in `Value.remove_data_at_cell_path`
- Pretty sound after #10875 (tests mentioned in commit message have been
removed by that)
- Update `did_you_mean` helper to use iterator
- Change `Value::columns` to return iterator
- This is not a place of honor
- Use `Record::get` in `Value::get_data_by_key`
# User-Facing Changes
None intentional, potential edge cases on duplicated columns could
change (considered undefined behavior)
# Tests + Formatting
(-)
Matches the general behavior of `Vec::drain` or
`indexmap::IndexMap::drain`:
- Drop the remaining elements (implementing the unstable `keep_rest()`
would not be compatible with something like `indexmap`)
- No `AsRef<[T]>` or `Drain::as_slice()` behavior as this would make
layout assumptions.
- `Drain: DoubleEndedIterator`
Found useful in #10903
# Description
Based of the work and discussion in #10844, this PR adds the `exec`
command for Windows. This is done by simply spawning a
`std::process::Command` and then immediately exiting via
`std::process::exit` once the child process is finished. The child
process's exit code is passed to `exit`.
# User-Facing Changes
The `exec` command is now available on Windows, and there should be no
change in behaviour for Unix systems.
# Description
Where appropriate, this PR replaces instances of
`Value::get_data_by_key` and `Value::follow_cell_path` with
`Record::get`. This avoids some unnecessary clones and simplifies the
code in some places.
Adds a special error, which is triggered by `alias foo=bar` style
commands. It adds a help string which recommends adding spaces.
Resolve#10958
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
# Description
Our config exists both as a `Config` struct for internal consumption and
as a `Value`. The latter is exposed through `$env.config` and can be
both set and read.
Thus we have a complex bug-prone mechanism, that reads a `Value` and
then tries to plug anything where the value is unrepresentable in
`Config` with the correct state from `Config`.
The parsing involves therefore mutation of the `Value` in a nested
`Record` structure. Previously this was wholy done manually, with
indices.
To enable deletion for example, things had to be iterated over from the
back. Also things were indexed in a bunch of places. This was hard to
read and an invitation for bugs.
With #10876 we can now use `Record::retain_mut` to traverse the records,
modify anything that needs fixing, and drop invalid fields.
# Parts:
- Error messages now consistently use the correct spans pointing to the
problematic value and the paths displayed in some messages are also
aligned with the keys used for lookup.
- Reconstruction of values has been fixed for:
- `table.padding`
- `buffer_editor`
- `hooks.command_not_found`
- `datetime_format` (partial solution)
- Fix validation of `table.padding` input so value is not set (and
underflows `usize` causing `table` to run forever with negative values)
- New proper types for settings. Fully validated enums instead of
strings:
- `config.edit_mode` -> `EditMode`
- Don't fall back to vi-mode on invalid string
- `config.table.mode` -> `TableMode`
- there is still a fall back to `rounded` if given an invalid
`TableMode` as argument to the `nu` binary
- `config.completions.algorithm` -> `CompletionAlgorithm`
- `config.error_style` -> `ErrorStyle`
- don't implicitly fall back to `fancy` when given an invalid value.
- This should also shrink the size of `Config` as instead of 4x24 bytes
those fields now need only 4x1 bytes in `Config`
- Completely removed macros relying on the scope of `Value::into_config`
so we can break it up into smaller parts in the future.
- Factored everything into smaller files with the types and helpers for
particular topics.
- `NuCursorShape` now explicitly expresses the `Inherit` setting.
conversion to option only happens at the interface to `reedline`
# Description
Since #10841 the goal is to remove the implementation details of
`Record` outside of core operations.
To this end use Record iterators and map-like accessors in a bunch of
places. In this PR I try to collect the boring cases where I don't
expect any dramatic performance impacts or don't have doubts about the
correctness afterwards
- Use checked record construction in `nu_plugin_example`
- Use `Record::into_iter` in `columns`
- Use `Record` iterators in `headers` cmd
- Use explicit record iterators in `split-by`
- Use `Record::into_iter` in variable completions
- Use `Record::values` iterator in `into sqlite`
- Use `Record::iter_mut` for-loop in `default`
- Change `nu_engine::nonexistent_column` to use iterator
- Use `Record::columns` iter in `nu-cmd-base`
- Use `Record::get_index` in `nu-command/network/http`
- Use `Record.insert()` in `merge`
- Refactor `move` to use encapsulated record API
- Use `Record.insert()` in `explore`
- Use proper `Record` API in `explore`
- Remove defensiveness around record in `explore`
- Use encapsulated record API in more `nu-command`s
# User-Facing Changes
None intentional
# Tests + Formatting
(-)
# Description
This change allows the vscode-specific ansi escape sequence of
633;P;Cwd= to be run when nushell detects that it's running inside of
vscode's terminal. Otherwise the standard OSC7 will run. This is helpful
with ctrl+g inside of vscode terminal as well.
closed#10989
/cc @CAD97
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
- Simplify `table` record highlight with `.get_mut`
- pretty straight forward
- Use record iterators in `table` abbreviation logic
- This required some rework if we go from guaranted contiguous arrays to
iterators
- Refactor `nu-table` internals to new record API
# User-Facing Changes
None intened
# Tests + Formatting
(-)
# Description
Rewrite `find` internals with the same principles as in #10927.
Here we can remove an unnecessary lookup accross all columns when not
narrowing find to particular columns
- Change `find` internal fns to use iterators
- Remove unnecessary quadratic lookup in `find`
- Refactor `find` record highlight logic
# User-Facing Changes
Should provide a small speedup when not providing `find --columns`
# Tests + Formatting
(-)
# Description
Changes the `captures` field in `Closure` from a `HashMap` to a `Vec`
and makes `Stack::captures_to_stack` take an owned `Vec` instead of a
borrowed `HashMap`.
This eliminates the conversion to a `Vec` inside `captures_to_stack` and
makes it possible to avoid clones altogether when using an owned
`Closure` (which is the case for most commands). Additionally, using a
`Vec` reduces the size of `Value` by 8 bytes (down to 72).
# User-Facing Changes
Breaking API change for `nu-protocol`.
# Description
This is easy to do with rust-analyzer, but I didn't want to just pump
these all out without feedback.
Part of #10700
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
`split-by` only works on a `Record`, the error type was updated to
match, and now uses a more-specific type. (Two type fixes for the price
of one!)
The `usage` was updated to say "record" as well
# User-Facing Changes
* Providing the wrong type to `split-by` now gives an error messages
with the correct required input type
Previously:
```
❯ ls | get name | split-by type
Error: × unsupported input
╭─[entry #267:1:1]
1 │ ls | get name | split-by type
· ─┬─
· ╰── requires a table with one row for splitting
╰────
```
With this PR:
```
❯ ls | get name | split-by type
Error: nu:🐚:type_mismatch
× Type mismatch.
╭─[entry #1:1:1]
1 │ ls | get name | split-by type
· ─┬─
· ╰── requires a record to split
╰────
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Only generated commands need to be updated
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Limit the test `-p nu-command --test main
commands::run_external::redirect_combine` which uses `sh` to running on
`not(Windows)` like is done for other tests assuming unixy CLI items;
`sh` doesn't exist on Windows.
# User-Facing Changes
None; this is a change to tests only.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
@jntrnr discovered that `items` wasn't properly setting the
`eval_block_with_early_return()` block settings. This change fixes that
which allows `echo` to be redirected and therefore pass data through the
pipeline.
Without `echo`
```nushell
❯ { new: york, san: francisco } | items {|key, value| $'($key) ($value)' }
╭─┬─────────────╮
│0│new york │
│1│san francisco│
╰─┴─────────────╯
```
With `echo`
```nushell
❯ { new: york, san: francisco } | items {|key, value| echo $'($key) ($value)' }
╭─┬─────────────╮
│0│new york │
│1│san francisco│
╰─┴─────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the `items` example so that it doesn't use `echo`.
`echo` now works like print unless it's being redirected, so it doesn't
send values through the pipeline anymore like the example showed.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The `PluginSignature` type supports extra usage but this was not
available in `plugin_name --help`. It also supports search terms but
these did not appear in `help commands`
New behavior show below is the "Extra usage for nu-example-1" line and
the "Search terms:" line
```
❯ nu-example-1 --help
PluginSignature test 1 for plugin. Returns Value::Nothing
Extra usage for nu-example-1
Search terms: example
Usage:
> nu-example-1 {flags} <a> <b> (opt) ...(rest)
Flags:
-h, --help - Display the help message for this command
-f, --flag - a flag for the signature
-n, --named <String> - named string
Parameters:
a <int>: required integer value
b <string>: required string value
opt <int>: Optional number (optional)
...rest <string>: rest value string
Examples:
running example with an int value and string value
> nu-example-1 3 bb
```
Search terms are also available in `help commands`:
```
❯ help commands | where name == "nu-example-1" | select name search_terms
╭──────────────┬──────────────╮
│ name │ search_terms │
├──────────────┼──────────────┤
│ nu-example-1 │ example │
╰──────────────┴──────────────╯
```
# User-Facing Changes
Users can now see plugin extra usage and search terms
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Added "Use `--help` for more information." to the help of
MissingPositional error
- this PR should close
[#10946](https://github.com/nushell/nushell/issues/10946)
**Before:**
**After:**
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Denis Zorya <denis.zorya@trafigura.com>
- Replaced `start`/`end` with span.
- Fixed standard library.
- Add `help` option.
- Add a couple more errors for invalid record types.
Resolve#10914
# Description
# User-Facing Changes
- **BREAKING CHANGE:** `error make` now takes in `span` instead of
`start`/`end`:
```Nushell
error make {
msg: "Message"
label: {
text: "Label text"
span: (metadata $var).span
}
}
```
- `error make` now has a `help` argument for custom error help.
# Description
After talking to @CAD97, I decided to change these unwraps to expects.
See the comments. The bigger question is, how did unwrap pass the CI?
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Replaces the `Vec::remove` in `Record::retain_mut` with some swaps which
should eliminate the `O(n^2)` complexity due to repeated shifting of
elements.
Now the `input list` command, when nothing is selected, will return a
null instead of empty string or an empty list.
Resolves#10909.
# User-Facing Changes
`input list` now returns a `null` when nothing is selected.
# Description
Consequences of #10841
This does not yet make the assumption that columns are always
duplicated. Follow the existing logic here
- Use saner record API in `nu-engine/src/eval.rs`
- Use checked record construction in `nu-engine/src/scope.rs`
- Use `values` iterator in `nu-engine/src/scope.rs`
- Use `columns` iterator in `nu_engine::get_columns()`
- Start using record API in `value/mod.rs`
- Use `.insert` in `eval_const.rs` Record code
- Record API for `eval_const.rs` table code
# User-Facing Changes
None
# Tests + Formatting
None
# Description
Pretty much all operations/commands in Nushell assume that the column
names/keys in a record and thus also in a table (which consists of a
list of records) are unique.
Access through a string-like cell path should refer to a single column
or key/value pair and our output through `table` will only show the last
mention of a repeated column name.
```nu
[[a a]; [1 2]]
╭─#─┬─a─╮
│ 0 │ 2 │
╰───┴───╯
```
While the record parsing already either errors with the
`ShellError::ColumnDefinedTwice` or silently overwrites the first
occurence with the second occurence, the table literal syntax `[[header
columns]; [val1 val2]]` currently still allowed the creation of tables
(and internally records with more than one entry with the same name.
This is not only confusing, but also breaks some assumptions around how
we can efficiently perform operations or in the past lead to outright
bugs (e.g. #8431 fixed by #8446).
This PR proposes to make this an error.
After this change another hole which allowed the construction of records
with non-unique column names will be plugged.
## Parts
- Fix `SE::ColumnDefinedTwice` error code
- Remove previous tests permitting duplicate columns
- Deny duplicate column in table literal eval
- Deny duplicate column in const eval
- Deny duplicate column in `from nuon`
# User-Facing Changes
`[[a a]; [1 2]]` will now return an error:
```
Error: nu:🐚:column_defined_twice
× Record field or table column used twice
╭─[entry #2:1:1]
1 │ [[a a]; [1 2]]
· ┬ ┬
· │ ╰── field redefined here
· ╰── field first defined here
╰────
```
this may under rare circumstances block code from evaluating.
Furthermore this makes some NUON files invalid if they previously
contained tables with repeated column names.
# Tests + Formatting
Added tests for each of the different evaluation paths that materialize
tables.
# Description
This change allows `compact` to also compact things with empty strings,
empty lists, and empty records if the `--empty` switch is used. Let's
add a quality-of-life improvement here to just compact all this mess. If
this is a bad idea, please cite examples demonstrating why.
```
❯ [[name position]; [Francis Lead] [Igor TechLead] [Aya null]] | compact position
╭#┬─name──┬position╮
│0│Francis│Lead │
│1│Igor │TechLead│
╰─┴───────┴────────╯
❯ [[name position]; [Francis Lead] [Igor TechLead] [Aya ""]] | compact position --empty
╭#┬─name──┬position╮
│0│Francis│Lead │
│1│Igor │TechLead│
╰─┴───────┴────────╯
❯ [1, null, 2, "", 3, [], 4, {}, 5] | compact
╭─┬─────────────────╮
│0│ 1│
│1│ 2│
│2│ │
│3│ 3│
│4│[list 0 items] │
│5│ 4│
│6│{record 0 fields}│
│7│ 5│
╰─┴─────────────────╯
❯ [1, null, 2, "", 3, [], 4, {}, 5] | compact --empty
╭─┬─╮
│0│1│
│1│2│
│2│3│
│3│4│
│4│5│
╰─┴─╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Changes `FromValue` to take owned `Value`s instead of borrowed `Value`s.
This eliminates some unnecessary clones (e.g., in `call_ext.rs`).
# User-Facing Changes
Breaking API change for `nu_protocol`.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
If an external completer is used and it returns no completions for a
filepath, we fall back to the builtin path completer.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Path completions will remain consistent with the use of an external
completer.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
- fixes#10766
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
If the partial supplied to the completion function is shorter than the
span, the cursor is in between the path, we are trying to complete an
intermediate directory. In such a case we:
- only suggest directory names
- don't append the slash since it is already present
- only complete the path till the component the cursor is on
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Intermediate directories can be completed without erasing the rest of
the path.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Reuses the existing `Closure` type in `Value::Closure`. This will help
with the span refactoring for `Value`. Additionally, this allows us to
more easily box or unbox the `Closure` case should we chose to do so in
the future.
# User-Facing Changes
Breaking API change for `nu_protocol`.
# Description
These macros simply took a `Span` and a shared reference to `Config` and
returned a Value, for better readability and reasoning about their
behavior convert them to simple function as they don't do anything
relevant with their macro powers.
# User-Facing Changes
None
# Tests + Formatting
(-)
# Description
While we have now a few ways to add items or iterate over the
collection, we don't have a way to cleanly remove items from `Record`.
This PR fixes that:
- Add `Record.remove()` to remove by key
- makes the assumption that keys are unique, so can not be used
universally, yet (see #10875 for an important example)
- Add naive `Record.retain()` for inplace removal
- This follows the two separate `retain`/`retain_mut` in the Rust std
library types, compared to the value-mutating `retain` in `indexmap`
- Add `Record.retain_mut()` for one-pass pruning
Continuation of #10841
# User-Facing Changes
None yet.
# Tests + Formatting
Doctests for the `retain`ing fun
# Description
This PR restores and old functionality that must of been broken with the
input_output_types() updating. It allows commands like this to work
again.
```nushell
open $nu.history-path |
get history.command_line |
split column ' ' cmd |
group-by cmd --to-table |
update items {|u| $u.items | length} |
sort-by items -r |
first 10 |
table -n 1
```
output
```
╭#─┬group─┬items╮
│1 │exit │ 3004│
│2 │ls │ 2591│
│3 │git │ 1678│
│4 │help │ 1549│
│5 │open │ 1374│
│6 │cd │ 1186│
│7 │cargo │ 944│
│8 │let │ 784│
│9 │source│ 755│
│10│z │ 486│
╰#─┴group─┴items╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Previously `group-by` returned a record containing each group as a
column. This data layout is hard to work with for some tasks because you
have to further manipulate the result to do things like determine the
number of items in each group, or the number of groups. `transpose` will
turn the record returned by `group-by` into a table, but this is
expensive when `group-by` is run on a large input.
In a discussion with @fdncred [several
workarounds](https://github.com/nushell/nushell/discussions/10462) to
common tasks were discussed, but they seem unsatisfying in general.
Now when `group-by --to-table` is used a table is returned with the
columns "groups" and "items" making it easier to do things like count
the number of groups (`| length`) or count the number of items in each
group (`| each {|g| $g.items | length`)
# User-Facing Changes
* `group-by` returns a `table` with "group" and "items" columns instead
of a `record` with one column per group name
# Tests + Formatting
Tests for `group-by` were updated
# After Submitting
* No breaking changes were made. The new `--to-table` switch should be
added automatically to the [`group-by`
documentation](https://www.nushell.sh/commands/docs/group-by.html)
# Description
> Our `Record` looks like a map, quacks like a map, so let's treat it
with the API for a map
Implement common methods found on e.g. `std::collections::HashMap` or
the insertion-ordered [indexmap](https://docs.rs/indexmap).
This allows contributors to not have to worry about how to get to the
relevant items and not mess up the assumptions of a Nushell record.
## Record assumptions
- `cols` and `vals` are of equal length
- for all practical purposes, keys/columns should be unique
## End goal
The end goal of the upcoming series of PR's is to allow us to make
`cols` and `vals` private.
Then it would be possible to exchange the backing datastructure to best
fit the expected workload.
This could be statically (by finding the best balance) or dynamically by
using an `enum` of potential representations.
## Parts
- Add validating explicit part constructor
`Record::from_raw_cols_vals()`
- Add `Record.columns()` iterator
- Add `Record.values()` iterator
- Add consuming `Record.into_values()` iterator
- Add `Record.contains()` helper
- Add `Record.insert()` that respects existing keys
- Add key-based `.get()`/`.get_mut()` to `Record`
- Add `Record.get_index()` for index-based access
- Implement `Extend` for `Record` naively
- Use checked constructor in `record!` macro
- Add `Record.index_of()` to get index by key
# User-Facing Changes
None directly
# Developer facing changes
You don't have to roll your own record handling and can use a familiar
API
# Tests + Formatting
No explicit unit tests yet. Wouldn't be too tricky to validate core
properties directly.
Will be exercised by the following PRs using the new
methods/traits/iterators.
# Description
Use `record!` macro instead of defining two separate `vec!` for `cols`
and `vals` when appropriate.
This visually aligns the key with the value.
Further more you don't have to deal with the construction of `Record {
cols, vals }` so we can hide the implementation details in the future.
## State
Not covering all possible commands yet, also some tests/examples are
better expressed by creating cols and vals separately.
# User/Developer-Facing Changes
The examples and tests should read more natural. No relevant functional
change
# Bycatch
Where I noticed it I replaced usage of `Value` constructors with
`Span::test_data()` or `Span::unknown()` to the `Value::test_...`
constructors. This should make things more readable and also simplify
changes to the `Span` system in the future.
# Description
as we can see in the [documentation of
`str.to_lowercase`](https://doc.rust-lang.org/std/primitive.str.html#method.to_lowercase),
not only ASCII symbols have lower and upper variants.
- `str upcase` uses the correct method to convert the string
7ac5a01e2f/crates/nu-command/src/strings/str_/case/upcase.rs (L93)
- `str downcase` incorrectly converts only ASCII characters
7ac5a01e2f/crates/nu-command/src/strings/str_/case/downcase.rs (L124)
this PR uses `str.to_lower_case` instead of `str.to_ascii_lowercase` in
`str downcase`.
# User-Facing Changes
- upcase still works fine
```nushell
~ l> "ὀδυσσεύς" | str upcase
ὈΔΥΣΣΕΎΣ
```
- downcase now works
👉 before
```nushell
~ l> "ὈΔΥΣΣΕΎΣ" | str downcase
ὈΔΥΣΣΕΎΣ
```
👉 after
```nushell
~ l> "ὈΔΥΣΣΕΎΣ" | str downcase
ὀδυσσεύς
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
adds two tests
- `non_ascii_upcase`
- `non_ascii_downcase`
# After Submitting
# Description
looking at the [Wax documentation about
`wax::Walk.not`](https://docs.rs/wax/latest/wax/struct.Walk.html#examples),
especially
> therefore does not read directory trees from the file system when a
directory matches an [exhaustive glob
expression](https://docs.rs/wax/latest/wax/trait.Pattern.html#tymethod.is_exhaustive)
> **Important**
> in the following of this PR description, i talk about *pruning* and a
`--prune` option, but this has been changed to *exclusion* and
`--exclude` after a discussion with @fdncred.
this looks like a *pruning* operation to me, right? 😮
i wanted to make the `glob` option `--not` clearer about that, because
> -n, --not <List(String)> - Patterns to exclude from the results
from `help glob` is not very explicit about whether the search is pruned
when entering a directory matching a pattern in `--not` or just removing
it from the output 😕
## changelog
this PR proposes to rename the `glob --not` option to `glob --prune` and
make it's documentation more explicit 😋
## benchmarking
to support the *pruning* behaviour put forward above, i've run a
benchmark
1. define two closures to compare the behaviour between removing
patterns manually or using `--not`
```nushell
let where = {
[.*/\.local/.*, .*/documents/.*, .*/\.config/.*]
| reduce --fold (glob **) {|pat, acc| $acc | where $it !~ $pat}
| length
}
```
```nushell
let not = { glob ** --not [**/.local/**, **/documents/**, **/.config/**] | length }
```
2. run the two to make sure they give similar results
```nushell
> do $where
33424
```
```nushell
> do $not
33420
```
👌
3. measure the performance
```nushell
use std bench
```
```nushell
> bench --verbose --pretty --rounds 25 $not
44ms 52µs 285ns +/- 977µs 571ns
```
```nushell
> bench --verbose --pretty --rounds 5 $where
1sec 250ms 187µs 99ns +/- 8ms 538µs 57ns
```
👉 we can see that the results are (almost) the same but
`--not` is much faster, looks like pruning 😋
# User-Facing Changes
- `--not` will give a warning message but still work
- `--prune` will work just as `--not` without warning and with a more
explicit doc
- `--prune` and `--not` at the same time will give an error
# Tests + Formatting
this PR fixes the examples of `glob` using the `--not` option.
# After Submitting
prepare the removal PR and mention in release notes.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Implements `whoami` using the `whoami` command from uutils as backend.
This is a draft because it depends on
https://github.com/uutils/coreutils/pull/5310 and a new release of
uutils needs to be made (and the paths in `Cargo.toml` should be
updated). At this point, this is more of a proof of concept 😄
Additionally, this implements a (simple and naive) conversion from the
uutils `UResult` to the nushell `ShellError`, which should help with the
integration of other utils, too. I can split that off into a separate PR
if desired.
I put this command in the "platform" category. If it should go somewhere
else, let me know!
The tests will currently fail, because I've used a local path to uutils.
Once the PR on the uutils side is merged, I'll update it to a git path
so that it can be tested and runs on more machines than just mine.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New `whoami` command. This might break some users who expect the system
`whoami` command. However, the result of this new command should be very
close, just with a nicer help message, at least for Linux users. The
default `whoami` on Windows is quite different from this implementation:
https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/whoami
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
related to
-
https://discord.com/channels/601130461678272522/614593951969574961/1162406310155923626
# Description
this PR
- does a bit of minor refactoring
- makes sure the input paths get expanded
- makes sure the input PATH gets split on ":"
- adds a test
- fixes the other tests
# User-Facing Changes
should give a better overall experience with `std path add`
# Tests + Formatting
adds a new test case to the `path_add` test and fixes the others.
# After Submitting
# Description
just noticed `$env.config.filesize.metric` is not the same in
`default_config.nu` and `config.rs`
# User-Facing Changes
filesizes will show in "binary" mode by default when using the default
config files, i.e. `kib` instead of `kb`.
# Tests + Formatting
# After Submitting
# Description
Currently the following command is broken:
```nushell
echo a o+e> 1.txt
```
It's because we don't redirect output of `echo` command. This pr is
trying to fix it.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes an overlook from a previous PR. It now correctly returns
the details on lazy records.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Describe detailed now returns the expected result.
# Description
- this PR should close#10819
# User-Facing Changes
Behaviour is similar to pre 0.86.0 behaviour of the cp command and
should as such not have a user-facing change, only compared to the
current version, were the option is readded.
# After Submitting
I guess the documentation will be automatically updated and as this
feature is no further highlighted, probably, no more work will be needed
here.
# Considerations
coreutils actually allows a third option:
```
pub enum UpdateMode {
// --update=`all`,
ReplaceAll,
// --update=`none`
ReplaceNone,
// --update=`older`
// -u
ReplaceIfOlder,
}
```
namely `ReplaceNone`, which I have not added. Also I think that
specifying `--update 'abc'` is non functional.
# Description
Fixes: #10830
The issue happened during lite-parsing, when we want to put a
`LiteElement` to a `LitePipeline`, we do nothing if relative redirection
target is empty.
So the command `echo aaa o> | ignore` will be interpreted to `echo aaa |
ignore`.
This pr is going to check and return an error if redirection target is
empty.
# User-Facing Changes
## Before
```
❯ echo aaa o> | ignore # nothing happened
```
## After
```nushell
❯ echo aaa o> | ignore
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #1:1:1]
1 │ echo aaa o> | ignore
· ─┬
· ╰── expected redirection target
╰────
```
# Description
Support pattern matching against the `null` literal. Fixes#10799
### Before
```nushell
> match null { null => "success", _ => "failure" }
failure
```
### After
```nushell
> match null { null => "success", _ => "failure" }
success
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users can pattern match against a `null` literal.
# Description
`from tsv` and `from csv` both support a `--flexible` flag. This flag
can be used to "allow the number of fields in records to be variable".
Previously, a record's invariant that `rec.cols.len() == rec.vals.len()`
could be broken during parsing. This can cause runtime errors as in
#10693. Other commands, like `select` were also affected.
The inconsistencies are somewhat hard to see, as most nushell code
assumes an equal number of columns and values.
# Before
### Fewer values than columns
```nushell
> let record = (echo "one,two\n1" | from csv --flexible | first)
# There are two columns
> $record | columns | to nuon
[one, two]
# But only one value
> $record | values | to nuon
[1]
# And printing the record doesn't show the second column!
> $record | to nuon
{one: 1}
```
### More values than columns
```nushell
> let record = (echo "one,two\n1,2,3" | from csv --flexible | first)
# There are two columns
> $record | columns | to nuon
[one, two]
# But three values
> $record | values | to nuon
[1, 2, 3]
# And printing the record doesn't show the third value!
> $record | to nuon
{one: 1, two: 2}
```
# After
### Fewer values than columns
```nushell
> let record = (echo "one,two\n1" | from csv --flexible | first)
# There are two columns
> $record | columns | to nuon
[one, two]
# And a matching number of values
> $record | values | to nuon
[1, null]
# And printing the record works as expected
> $record | to nuon
{one: 1, two: null}
```
### More values than columns
```nushell
> let record = (echo "one,two\n1,2,3" | from csv --flexible | first)
# There are two columns
> $record | columns | to nuon
[one, two]
# And a matching number of values
> $record | values | to nuon
[1, 2]
# And printing the record works as expected
> $record | to nuon
{one: 1, two: 2}
```
# User-Facing Changes
Using the `--flexible` flag with `from csv` and `from tsv` will not
result in corrupted record state.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is just a fixup PR. There was a describe PR that passed CI but then
later didn't pass main. This PR fixes that issue.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- Add `detailed` flag for `describe`
- Improve detailed describe and better format when running examples.
# Rationale
For now, neither `describe` nor any of the `debug` commands provide an
easy and structured way of inspecting the data's type and more. This
flag provides a structured way of getting such information. Allows also
to avoid the rather hacky solution
```nu
$in | describe | str replace --regex '<.*' ''
```
# User-facing changes
Adds a new flag to ``describe`.
Reverts nushell/nushell#10812
This goes back to a version of `regex` and its dependencies that is
shared with a lot of our other dependencies. Before this we did not
duplicate big dependencies of `regex` that affect binary size and
compile time.
As there is no known bug or security problem we suffer from, we can wait
on receiving the performance improvements to `regex` with the rest of
our `regex` dependents.
r? @fdncred
Last one, I hope. At least short of completely redesigning `registry
query`'s interface. (Which I wouldn't implement without asking around
first.)
# Description
User-Facing Changes has the general overview. Inline comments provide a
lot of justification on specific choices. Most of the type conversions
should be reasonably noncontroversial, but expanding `REG_EXPAND_SZ`
needs some justification. First, an example of the behavior there:
```shell
> # release nushell:
> version | select version commit_hash | to md --pretty
| version | commit_hash |
| ------- | ---------------------------------------- |
| 0.85.0 | a6f62e05ae |
> registry query --hkcu Environment TEMP | get value
%USERPROFILE%\AppData\Local\Temp
> # with this patch:
> version | select version commit_hash | to md --pretty
| version | commit_hash |
| ------- | ---------------------------------------- |
| 0.86.1 | 0c5a4c991f |
> registry query --hkcu Environment TEMP | get value
C:\Users\CAD\AppData\Local\Temp
> # Microsoft CLI tooling behavior:
> ^pwsh -c `(Get-ItemProperty HKCU:\Environment).TEMP`
C:\Users\CAD\AppData\Local\Temp
> ^reg query HKCU\Environment /v TEMP
HKEY_CURRENT_USER\Environment
TEMP REG_EXPAND_SZ %USERPROFILE%\AppData\Local\Temp
```
As noted in the inline comments, I'm arguing that it makes more sense to
eagerly expand the %EnvironmentString% placeholders, as none of
Nushell's path functionality will interpret these placeholders. This
makes the behavior of `registry query` match the behavior of pwsh's
`Get-ItemProperty` registry access, and means that paths (the most
common use of `REG_EXPAND_SZ`) are actually usable.
This does *not* break nu_script's
[`update-path`](https://github.com/nushell/nu_scripts/blob/main/sourced/update-path.nu);
it will just be slightly inefficient as it will not find any
`%Placeholder%`s to manually expand anymore. But also, note that
`update-path` is currently *wrong*, as a path including
`%LocalAppData%Low` is perfectly valid and sometimes used (to go to
`Appdata\LocalLow`); expansion isn't done solely on a path segment
basis, as is implemented by `update-path`.
I believe that the type conversions implemented by this patch are
essentially always desired. But if we want to keep `registry query`
"pure", we could easily introduce a `registry get`[^get] which does the
more complete interpretation of registry types, and leave `registry
query` alone as doing the bare minimum. Or we could teach `path expand`
to do `ExpandEnvironmentStringsW`. But REG_EXPAND_SZ being the odd one
out of not getting its registry type semantics decoded by `registry
query` seems wrong.
[^get]: This is the potential redesign I alluded to at the top. One
potential change could be to make `registry get Environment` produce
`record<Path: string, TEMP: string, TMP: string>` instead of `registry
query`'s `table<name: string, value: string, type: string>`, the idea
being to make it feel as native as possible. We could even translate
between Nu's cell-path and registry paths -- cell paths with spaces do
actually work, if a bit awkwardly -- or even introduce lazy records so
the registry can be traversed with normal data manipulation ... but that
all seems a bit much.
# User-Facing Changes
- `registry query`'s produced `value` has changed. Specifically:
- ❗ Rows `where type == REG_EXPAND_SZ` now expand `%EnvironmentVarable%`
placeholders for you. For example, `registry query --hkcu Environment
TEMP | get value` returns `C:\Users\CAD\AppData\Local\Temp` instead of
`%USERPROFILE%\AppData\Local\Temp`.
- You can restore the old behavior and preserve the placeholders by
passing a new `--no-expand` switch.
- Rows `where type == REG_MULTI_SZ` now provide a `list<string>` value.
They previously had that same list, but `| str join "\n"`.
- Rows `where type == REG_DWORD_BIG_ENDIAN` now provide the correct
numeric value instead of a byte-swapped value.
- Rows `where type == REG_QWORD` now provide the correct numeric
value[^sign] instead of the value modulo 2<sup>32</sup>.
- Rows `where type == REG_LINK` now provide a string value of the link
target registry path instead of an internal debug string representation.
(This should never be visible, as links should be transparently
followed.)
- Rows `where type =~ RESOURCE` now provide a binary value instead of an
internal debug string representation.
[^sign]: Nu's `int` is a signed 64-bit integer. As such, values >=
2<sup>63</sup> will be reported as their negative two's compliment
value. This might sometimes be the correct interpretation -- the
registry does not distinguish between signed and unsigned integer values
-- but regedit and pwsh display all values as unsigned.
# Description
Remove the `clean_string` hack used in `registry query`.
This was a workaround for a [bug][gentoo90/winreg-rs#52] in winreg which
has since [been fixed][edf9eef] and released in [winreg v0.12.0].
winreg now properly displays strings in RegKey's Display impl instead of
outputting their debug representation. We remove our `clean_string` such
that registry entries which happen to start/end with `"` or contain `\\`
won't get mangled. This is very important for entries in UNC path format
as those begin with a double backslash.
[gentoo90/winreg-rs#52]:
<https://github.com/gentoo90/winreg-rs/issues/52>
[edf9eef]:
<edf9eef38f>
[winreg v0.12.0]:
<https://github.com/gentoo90/winreg-rs/releases/tag/v0.12.0>
# User-Facing Changes
- `registry query` used to accidentally mangle values that contain a
literal `\\`, such as UNC paths. It no longer does so.
# Tests + Formatting
- [X] `toolkit check pr`
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Rename `str size` to `str stats`, for more detail see:
https://github.com/nushell/nushell/pull/10772
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Move `ansi link` from extra to default feature, close#10792
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
-
https://discord.com/channels/601130461678272522/614613939334152217/1164530991931605062
# Description
it appears `size` is a command that operates on `string`s only and gives
the user information about the chars, graphemes and bytes of a string.
this looks like a command that should be a subcommand to `str` 😏
this PR
- adds `str size`
- deprecates `size`
`size` is planned to be removed in 0.88
# User-Facing Changes
`str size` can be used for the same result as `size`.
# Tests + Formatting
# After Submitting
write a removal PR for `size`
This commit uses the new `CwdAwareHinter` in reedline. Closes#8883.
# Description
Currently, the history based hints show results from all directories,
while most commands make sense only in the directory they were run in.
This PR makes hints take the current directory into account.
# User-Facing Changes
Described above.
I haven't yet added a config option for this, because I personally
believe folks won't be against it once they try it out. We can add it if
people complain, there's some time before the next release.
Fish has this without a config option too.
# Tests + Formatting
If tests are needed, I'll need help as I'm not well versed with the
codebase.
related to
- https://github.com/nushell/nushell/pull/10770
# Description
because some people look into `unfold` already (myself included lol) and
there will be 4 weeks with that new command which has a decent section
in the release note, i fear that
https://github.com/nushell/nushell/pull/10770 is a bit too brutal,
removing `unfold` without any warning...
this PR brings `unfold` back to life.
the `unfold` command will have a deprecation warning and will be removed
in 0.88.
# User-Facing Changes
`unfold` is only deprecated, not removed.
# Tests + Formatting
# After Submitting
related to
- https://github.com/nushell/nushell/pull/10520
# Description
this PR is a followup to https://github.com/nushell/nushell/pull/10520
and removes the `random integer` command completely, in favor of `random
int`.
# User-Facing Changes
`random integer` has been fully moved to `random int`
```nushell
> random integer 0..1
Error: nu::parser::extra_positional
× Extra positional argument.
╭─[entry #1:1:1]
1 │ random integer 0..1
· ───┬───
· ╰── extra positional argument
╰────
help: Usage: random
```
# Tests + Formatting
tests have been moved from
`crates/nu-command/tests/commands/random/integer.rs` to
`crates/nu-command/tests/commands/random/int.rs`
# After Submitting
mention in 0.87.0 release notes
related to
- https://github.com/nushell/nushell/pull/10478
# Description
this PR is the followup removal to
https://github.com/nushell/nushell/pull/10478.
# User-Facing Changes
`$nothing` is now an undefined variable, unless define by the user.
```nushell
> $nothing
Error: nu::parser::variable_not_found
× Variable not found.
╭─[entry #1:1:1]
1 │ $nothing
· ────┬───
· ╰── variable not found.
╰────
```
# Tests + Formatting
# After Submitting
mention that in release notes
# Description
This PR renames the `unfold` command to `generate`.
closes#10760
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Since the `else` clause for the nested branches check for the first
unmatched argument, this PR brings together all the conditions where the
positional argument shape is numeric using the `matches!` keyword. This
also allows us to and (`&&`) the condition with when no short flags are
found unlike the `if let ...` statements. Finally, we can handle any
`unmatched_short_flags` at one place.
# User-Facing Changes
No user facing changes.
# Description
This PR adds the ability to use modulo with durations:
```nu
(2min + 31sec) mod 20sec # 11sec
```
# User-Facing Changes
Allows to use `<duration> mod <duration>`
# Description
Changed `group-by` behavior to accept empty list as input and return an
empty record instead of throwing an error. I also replaced
`errors_if_input_empty()` test to reflect the new expected behavior.
See #10713
# User-Facing Changes
`[] | group-by` or `[] | group-by a` now returns empty record
# Tests + Formatting
1 test for emptied table i.e. list
---------
Signed-off-by: Oscar <71343264+0scvr@users.noreply.github.com>
follow-up to
- https://github.com/nushell/nushell/pull/10566
# Description
this PR deprecates the use of `def-env` and `export def-env`
these two core commands will be removed in 0.88
# User-Facing Changes
using `def-env` will give a warning
```nushell
> def-env foo [] { print "foo" }; foo
Error: × Deprecated command
╭─[entry #1:1:1]
1 │ def-env foo [] { print "foo" }; foo
· ───┬───
· ╰── `def-env` is deprecated and will be removed in 0.88.
╰────
help: Use `def --env` instead
foo
```
# Tests + Formatting
# After Submitting
follow-up to
- https://github.com/nushell/nushell/pull/10566
# Description
this PR deprecates the use of `extern-wrapped` and `export
extern-wrapped`
these two core commands will be removed in 0.88
# User-Facing Changes
using `extern-wrapped` will give a warning
```nushell
> extern-wrapped foo [...args] { print "foo" }; foo
Error: × Deprecated command
╭─[entry #2:1:1]
1 │ extern-wrapped foo [...args] { print "foo" }; foo
· ───────┬──────
· ╰── `extern-wrapped` is deprecated and will be removed in 0.88.
╰────
help: Use `def --wrapped` instead
foo
```
# Tests + Formatting
# After Submitting
Add `--ignore-errors` flag to reject.
This is a PR in reference to #10215 as select has the flag, but reject
hasn't
user can now add `-i` or `--ignore-errors` flag to turn every cell path
into option.
```nushell
> let arg = [0 5 a c]
> [[a b];[1 2] [3 4] [5 6]] | reject $a | to nuon
error index to large
# ----
> let arg = [0 5 a c]
> [[a b];[1 2] [3 4] [5 6]] | reject $a -i | to nuon
[[a, b]; [1, 2], [3, 4], [5, 6]]
```
When looking into `lite_parse` function, I found that it contains some
duplicate code, and they can be expressed as an action called
`push_command_to(pipeline)`.
And I believe it will make our life easier to support something like
`o>> a.txt`, `e>> a.txt`.
In the final match of `lex_item`, we'll return `Err(ParseError)` in rare
case, normally we'll return None.
So I think making error part mutable can reduce some code, and it's
better if we want to add more lex items.
# Description
just caught a last mention to `let-env` in the `CONTRIBUTING.md`
document 😋
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
Files that begin with dashes can be ambiguous when passed to commands
like `ls`. For example if there exists a file `--help`, it might be
considered a flag if not properly escaped. This PR escapes any file that
begins with a dash.
# User-Facing Changes
Files beginning with dashes will be escaped.
# Tests + Formatting
Tests are added.
(squashed version of #10557, clean commit history and review thread)
Fixes#10571, also potentially: #10364, #10211, #9558, #9310,
# Description
Changes processing of arguments to filesystem commands that are source
paths or globs.
Applies to `cp, cp-old, mv, rm, du` but not `ls` (because it uses a
different globbing interface) or `glob` (because it uses a different
globbing library).
The core of the change is to lookup the argument first as a file and
only glob if it is not. That way,
a path containing glob metacharacters can be referenced without glob
quoting, though it will have to be single quoted to avoid nushell
parsing.
Before: A file path that looks like a glob is not matched by the glob
specified as a (source) argument and takes some thinking about to
access. You might say the glob pattern shadows a file with the same
spelling.
```
> ls a*
╭───┬────────┬──────┬──────┬────────────────╮
│ # │ name │ type │ size │ modified │
├───┼────────┼──────┼──────┼────────────────┤
│ 0 │ a[bc]d │ file │ 0 B │ 34 seconds ago │
│ 1 │ abd │ file │ 0 B │ now │
│ 2 │ acd │ file │ 0 B │ now │
╰───┴────────┴──────┴──────┴────────────────╯
> cp --verbose 'a[bc]d' dest
copied /home/bobhy/src/rust/work/r4/abd to /home/bobhy/src/rust/work/r4/dest/abd
copied /home/bobhy/src/rust/work/r4/acd to /home/bobhy/src/rust/work/r4/dest/acd
> ## Note -- a[bc]d *not* copied, and seemingly hard to access.
> cp --verbose 'a\[bc\]d' dest
Error: × No matches found
╭─[entry #33:1:1]
1 │ cp --verbose 'a\[bc\]d' dest
· ─────┬────
· ╰── no matches found
╰────
> #.. but is accessible with enough glob quoting.
> cp --verbose 'a[[]bc[]]d' dest
copied /home/bobhy/src/rust/work/r4/a[bc]d to /home/bobhy/src/rust/work/r4/dest/a[bc]d
```
Before_2: if file has glob metachars but isn't a valid pattern, user
gets a confusing error:
```
> touch 'a[b'
> cp 'a[b' dest
Error: × Pattern syntax error near position 30: invalid range pattern
╭─[entry #13:1:1]
1 │ cp 'a[b' dest
· ──┬──
· ╰── invalid pattern
╰────
```
After: Args to cp, mv, etc. are tried first as literal files, and only
as globs if not found to be files.
```
> cp --verbose 'a[bc]d' dest
copied /home/bobhy/src/rust/work/r4/a[bc]d to /home/bobhy/src/rust/work/r4/dest/a[bc]d
> cp --verbose '[a][bc]d' dest
copied /home/bobhy/src/rust/work/r4/abd to /home/bobhy/src/rust/work/r4/dest/abd
copied /home/bobhy/src/rust/work/r4/acd to /home/bobhy/src/rust/work/r4/dest/acd
```
After_2: file with glob metachars but invalid pattern just works.
(though Windows does not allow file name to contain `*`.).
```
> cp --verbose 'a[b' dest
copied /home/bobhy/src/rust/work/r4/a[b to /home/bobhy/src/rust/work/r4/dest/a[b
```
So, with this fix, a file shadows a glob pattern with the same spelling.
If you have such a file and really want to use the glob pattern, you
will have to glob quote some of the characters in the pattern. I think
that's less confusing to the user: if ls shows a file with a weird name,
s/he'll still be able to copy, rename or delete it.
# User-Facing Changes
Could break some existing scripts. If user happened to have a file with
a globbish name but was using a glob pattern with the same spelling, the
new version will process the file and not expand the glob.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR is just a quick change to add `coreutils` to the `cp` command. I
thought that it would be a good search term as we start to integrate
more `coreutils` commands.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds a new command called `debug info`. I'm not sure if the name
is right but we can rename it if needed. The purpose of this command is
to show a user how much memory nushell is using. This is what the output
looks like.
I feel like the further we go with nushell, the more we'll need to
easily monitor the memory usage. With this command, we should easily be
able to do that with scripts or just running the command.
```nushell
❯ debug info | table -e
╭─────────┬──────────────────────────────────────────────────────────────────────╮
│pid │31036 │
│ppid │29388 │
│ │╭─────────────────┬────────────────────────────────────────────────╮ │
│process ││memory │63.5 MB │ │
│ ││virtual_memory │5.6 GB │ │
│ ││status │Runnable │ │
│ ││root │C:\cartar\debug │ │
│ ││cwd │C:\Users\us991808\source\repos\forks\nushell\ │ │
│ ││exe_path │C:\cartar\debug\nu.exe │ │
│ ││command │c:\cartar\debug\nu.exe -l │ │
│ ││name │nu.exe │ │
│ ││environment │{record 110 fields} │ │
│ │╰─────────────────┴────────────────────────────────────────────────╯ │
│ │╭────────────────┬───────╮ │
│system ││total_memory │17.1 GB│ │
│ ││free_memory │5.9 GB │ │
│ ││used_memory │11.3 GB│ │
│ ││available_memory│5.9 GB │ │
│ │╰────────────────┴───────╯ │
╰─────────┴──────────────────────────────────────────────────────────────────────╯
```
> [!NOTE]
The `process.environment` is not the nushell `$env` but the environment
that the process was created with at launch time.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Refer to
https://github.com/nushell/nushell/pull/10600#issuecomment-1762863791
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
A path is escaped when it can be entirely parsed as a floating point
number. This includes `nan`, `inf` and their negative counterparts since
nu also supports them.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Paths with numbers that cannot be ambiguous are no longer surrounded by
backticks.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR allows `open` to handle files with multiple extensions; i.e it
will try to call `from tar.gz`, `from gz` when calling
```nu
open file.tar.gz
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No breaking changes.
# Description
After the addition of the prefix tab completion support, the older
`partial_from` function is left with a single invocation. This PR moves
the code inside the function to the point of invocation.
# User-Facing Changes
No user facing changes.
# Tests + Formatting
Tests are passing.
Fixes#10696
# Description
As reported, you could mess up the ring of remembered directories in
`std dirs` (a.k.a the `shells` commands) with a sequence like this:
```
~/test> mkdir b c
~/test> pushd b
~/test/b> cd ../c
~/test/c> goto 0
~/test> goto 1
## expect to end up in ~/test/c
## observe you're in ~/test/b
~/test/b>
```
Problem was `dirs goto` was not updating the remembered directories
before leaving the current slot for some other. This matters if the user
did a manual `cd` (which cannot update the remembered directories ring)
# User-Facing Changes
None! it just works ™️
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Re-fixes #3674, if that is seen as desirable to do.
# Description
This PR changes the implementation of the `--features=extra` string
casing commands from Inflector to `heck`, as in PR #4081. This PR landed
a long time ago, but somewhere along the way (i can't find it) the
implementation ended up being switched back to Inflector.
# User-Facing Changes
Inflector and `heck` implement casing differently, so all of the
commands have different behavior around edge cases (consecutive
capitals, interspersed numbers and letters, etc)
### Before
```nu
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str camel-case
╭───┬───────────╮
│ 0 │ userID │
│ 1 │ abcdefGHI │
│ 2 │ foo123Bar │
╰───┴───────────╯
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str snake-case
╭───┬─────────────╮
│ 0 │ user_id │
│ 1 │ ab_cdef_ghi │
│ 2 │ foo_12_3bar │
╰───┴─────────────╯
```
### After
```nu
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str camel-case
╭───┬───────────╮
│ 0 │ userId │
│ 1 │ abCdefGhi │
│ 2 │ foo123bar │
╰───┴───────────╯
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str snake-case
╭───┬─────────────╮
│ 0 │ user_id │
│ 1 │ ab_cdef_ghi │
│ 2 │ foo123bar │
╰───┴─────────────╯
```
# Tests + Formatting
The existing string casing tests pass... because none of them relied on
any of these edge cases
# Description
Open question:
Undocumented behavior for the new argument `ambiguous` to the
`as_datetime`
methods. I cheated by passing a default (assuming empty string).
This appears like an API primarily serving the python impl:
https://pola-rs.github.io/polars/py-polars/html/reference/expressions/api/polars.Expr.str.to_datetime.html#polars-expr-str-to-datetime
# User-Facing Changes
Only dependent on breaking changes to the behavior of polars.
# Tests + Formatting
No observed changes to tests
Manually checked `dfr as-datetime`, doesn't seem to panic.
# Description
Those commands either only return `Type::Float` or `Type::Int`
Narrow the type to the correct output
# User-Facing Changes
More correct type in documentation
# Description
This PR changes `Type::Float` to point at `SyntaxShape::Float` instead
of `SyntaxShape::Number`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This will only display the list of subcommands.
Prompted by a question on Discord why completions may be missing.
With standard completion settings getting the subcommands doesn't seem
to be a problem but we could add this command for good measure.
# User-Facing Changes
New command `dfr` that does nothing apart from displaying the
subcommands and hogging a space in the completions
# Tests + Formatting
(-)
# Description
This PR renames nushell's `cp` command to `cp-old` to make room for
`ucp` to be renamed to `cp`, making the coreutils version of `cp` the
default for nushell. After some period of time, we should remove
`cp-old` entirely.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
followup to
- https://github.com/nushell/nushell/pull/9979
## ⚠️ wait for just before 0.86 ⚠️
# Description
after deprecation comes removal 😏
# User-Facing Changes
`into decimal` is removed in favor of `into float`
# Tests + Formatting
# After Submitting
# Description
Fix#10506 by adding `ExpectedNonNull` `ShellError` if required field is
entered as `$nothing`, `null`, " ", etc.
This adds a new `ShellError`, `ExpectedNonNull`, taking the expected
type and span.
# User-Facing Changes
Will get a more helpful error in the case described by #10506. Examples:
```nushell
➜ {scheme: "", host: "github.com"} | url join
Error: nu:🐚:expected_non_null
× Expected string found null.
╭─[entry #16:1:1]
1 │ {scheme: "", host: "github.com"} | url join
· ─┬
· ╰── expected string, found null
╰────
```
```nushell
❯ {scheme: "https", host: null} | url join
Error: nu:🐚:expected_non_null
× Expected string found null.
╭─[entry #19:1:1]
1 │ {scheme: "https", host: null} | url join
· ──┬─
· ╰── expected string, found null
╰────
```
# Tests + Formatting
All pass.
followup to
- https://github.com/nushell/nushell/pull/9979
## ⚠️ wait for just before 0.86 ⚠️
# Description
after deprecation comes removal 😏
# User-Facing Changes
`into decimal` is removed in favor of `into float`
# Tests + Formatting
# After Submitting
# Description
The issue #10318 is resolved by introducing helper methods within the
existing `get_documentation` function in the nu-engine crate. Initially,
I considered using nu-color-config crate to convert HEX config color to
ANSI color and employing the following method
[https://github.com/nushell/nushell/blob/main/crates/nu-color-config/src/color_config.rs#L9C1-L20C2](https://github.com/nushell/nushell/blob/main/crates/nu-color-config/src/color_config.rs#L9C1-L20C2).
However, this approach was deemed impractical due to circular
dependencies. Consequently, in a manner akin to how we invoke the
`table` command from the nu-command crate in `get_documentation`
function to create a themed-colored table, we invoke the `ansi` command
from nu-command to obtain the ANSI theme color code.
# User-Facing Changes
Visual Changes Only: the help command now uses configured theme, else it
falls back on default hard coded values.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
-
https://discord.com/channels/601130461678272522/615329862395101194/1159484770468773990
# Description
because the following might not be trivial
```nushell
> "/foo/bar" | path join "/" "baz"
/baz
```
i thought adding a few examples to the `path join` command might help
😇
# User-Facing Changes
two new examples in `help path join` one with `..` and the other with
`/` 👍
# Tests + Formatting
the examples have `result`s so that they are checked.
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
- fixes#10649
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
Tab completions for paths starting with `./` shall have the prefix
preserved.
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This pr fix clippy warnings in latest clippy version(1.72.0):
Unfortunally it's not easy to handle for [try
fold](https://rust-lang.github.io/rust-clippy/master/index.html#/manual_try_fold)
warning in `start command`
Refer to known issue:
> This lint doesn’t take into account whether a function does something
on the failure case, i.e., whether short-circuiting will affect
behavior. Refactoring to try_fold is not desirable in those cases.
That's the case for our code, which does something on the failure case.
So this pr is making a little refactor on `try_commands`.
# Description
Relax typechecking of key-less `table`/`record`
Assume that they are acceptable for more narrowly specified
`table<...>`/`record<...>` where `...` specifies keys and potentially
types for those keys/columns.
This ensures that you can use commands that specify general return
values statically with more specific input-/args-type requirements.
Reduces the power of the type-check a bit but unlocks you to actually
use the specific annotations in more places.
Incompatibilities will only be raised if an output type declares
specific columns/keys.
Closes#9702
Supersedes #10594 as a simpler solution requiring no extra distinction.
h/t @1kinoti, @NotLebedev
# User-Facing Changes
Now legal at type-check time
```nu
def foo []: nothing -> table { [] }
def foo []: nothing -> table<> { ls }
def bar []: table<a:int,b:string> -> nothing {}
foo | bar
```
# Tests + Formatting
- 1 explicit test with specified relaxed return type passed to concrete
expected input type
- 1 test leveraging the general output type of a built-in command
- 1 test wrapping a general built-in command and verifying the type
inference in the function body
# Description
Fixes https://github.com/nushell/nushell/issues/10605 (again).
The loop looking for `[` to determine signature position didn't stop
early enough, so it thought the second `[` denoting the inp/out types
marks the beginning of the signature.
# User-Facing Changes
# Tests + Formatting
adds a new `predecl_signature_multiple_inp_out_types` test
# After Submitting
I haven't tested cause can't reproduce, but the issue very likely was
related to a emojies. (I mean I probably could but ....)
Could you try it @fdncred?
fix#10560
# Description
This PR bumps the rust toolchain to 1.71.1
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Closes#10537. Basically error message was unhelpful, and this temporary
measure adds back the nice previous nushell error message. Ideally, we
would like to add a more permanent solution mentioned in the issue
[comments](https://github.com/nushell/nushell/issues/10537#issuecomment-1743686122),
but since we want to have `ucp` as `cp` on new release, this is hackier
but way simpler so this fix should do it.
Only downside is that now behavior differs from `uutils` in the sense
that:
```
uutils:
> cp a foo/ bar
ls bar
# foo/a
nushell:
>ucp a foo/ bar
# directory error (not copied) ....
```
So, since its non fatal error, uutils copies a, but nushell errors out
with nothing copied. If we go to option 3 mentioned above, then we can
decide what we want to do, and perhaps continue on a non fatal error.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [X] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Fixes#10586
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Any partial path that begins with or is surrounded by a quote or
backtick will be tab completed. The completed result would be surrounded
by backticks unconditionally.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
See above.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Formatted and added test cases.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
To my knowledge `type@completer` annotations only make sense in
arguments at the moment.
Restrict the parsing.
Also fix a bug in parsing the completer annotation should there be more
than 1 `@`
- Add test that we disallow completer in type
- Guard against `@` inside command name
- Disallow custom completers in type specification
# User-Facing Changes
Error when annotating a variable or input-output type with a completer
# Tests + Formatting
Tests to verify the error message
Implemented URL decoding as a url subcommand, created corresponding unit
tests. The logic, examples and descriptions were based on the existing
`url encode` command.
Resolves#10563
# Description
Added a new `url decode` command to compliment the existing `url
encode`, as proposed by myself in #10563.
It takes a string, list of strings or cell path and produces the
corresponding decoded strings.
# User-Facing Changes
New url subcommand `url decode`, as described above.
# Tests + Formatting
I've added unit tests for the new subcommand and ensured all actions
outlined below showed no issues.
- [x] `cargo fmt --all -- --check`
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
- [x] `cargo test --workspace`
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"`
# Description
This PR removes the underline from the log format. It's been messing
things up for me since there is no ansi reset in the log format and
therefore everything after it is underlined.
This PR should end things like this.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Reverts nushell/nushell#10596
Using the long option in examples is going to be confusing as it makes
the reader think the long option is required. It also isn't idiomatic
Nushell.
The examples should be copy-paste-able as idiomatic Nushell, so as such
we shouldn't expand them to the long flag name.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Long options are preferable over short ones for documentation.
This PR ports some command examples to exclusively use long options.
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
✅
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
- https://github.com/nushell/nushell/issues/9373
- https://github.com/nushell/nushell/issues/8639
might be able to close https://github.com/nushell/nushell/issues/8639?
# Description
"can't follow stream paths" errors have always been a bit scary and
obnoxious because they give no information about what happens...
in this PR i try to slightly improve the error message by telling if the
stream was empty or not and give span information when available.
# User-Facing Changes
```nushell
> update value (get value)
Error: nu:🐚:incompatible_path_access
× Data cannot be accessed with a cell path
╭─[entry #1:1:1]
1 │ update value (get value)
· ─┬─
· ╰── empty pipeline doesn't support cell paths
╰────
```
```nushell
> ^echo "foo" | get 0
Error: nu:🐚:incompatible_path_access
× Data cannot be accessed with a cell path
╭─[entry #2:1:1]
1 │ ^echo "foo" | get 0
· ──┬─
· ╰── external stream doesn't support cell paths
╰────
```
# Tests + Formatting
# After Submitting
# Description
When referring to the type use `int` consistently. Only when referring
to the concept of integer numbers use `integer`.
- Fix `random integer` to `random int` tests
- Forgot in #10520
- Use int instead of integer in error messages
- Use int type name in bits commands
- Fix messages in `for` examples
- Use int typename in `into` commands
- Use int typename in rest of commands
- Report errors in `nu-protocol` with int typename
Work for #10332
# User-Facing Changes
User errorrs should now use `int` so you can easily find the necessary
commands or type annotations.
# Tests + Formatting
Only two tests found that needed updating
code cleanup of *eval.rs*
I was reviewing the engine code and noticed this...
The *eval_element_with_input* method in eval.rs does not need to be
public at the moment
because no one is calling it...
@jntrnr is making this method not public going to block someone in the
future who might need it ?
Right now its not being used so I decided to tighten up the API a bit...
# Description
This removes the old style "cd with abbreviations" that would attempt to
guess what directory you wanted to `cd` to. This would sometimes have
false positives, so we left it off by default in the config.
In the current main, we have much-improved path completions
(https://github.com/nushell/nushell/pull/10543) so you can now do `cd
a/b<tab>` and get a much better experience (because you can see the
directory you're about to cd to). This removes the need for the previous
abbreviation system.
# User-Facing Changes
This does remove the old abbreviation system. It will likely mean that
old config files that have settings for abbreviations will now get
errors.
update: here's an example of the error you'll see:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This allows auto-cd (cd'ing by just typing the directory name with `cd`)
to work if there's a trailing slash in the path.
# User-Facing Changes
This should be an improvement over previous behaviour. I don't think
this clashes with any existing assumptions.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close#5683
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR allows tab completion for nested directories while only
specifying a part of the directory names. To illustrate this, if I type
`tar/de/inc` and hit tab, it autocompletes to
`./target/debug/incremental`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Nested paths can be tab completed by typing lesser characters.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests cases are added.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds a few more grid icons and updates some existing ones.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds warning to `url join` when input key is not supported as suggested
by @amtoine in #10506.
It just adds a `println!` statement but it seems like that is all that
is done for other warnings, e.g.,
20aaaaf90c/crates/nu-glob/src/lib.rs (L434)
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
All pass.
follow up to
- #10283
# Description
even though it appears defining `to foo` does not allow to do `save
x.foo` for free (see https://github.com/nushell/nushell/issues/10429),
because #10283 did add `from ndjson` and `from jsonl` to the standard
library, i thought adding their `to ...` counterpart would make sense
😋
# User-Facing Changes
users can now convert structured data back to NDJSON and JSONL 👌
# Tests + Formatting
this PR adds the exact same tests as for the `from ...` commands
- structured data is in `result` and the string is now the expected
- the two invalid `from ...` tests cannot be reproduced for `to ...`
afaik
# After Submitting
Remove code for 2 no-longer-used configuration options in `explore`:
`explore.config.cursor_color` and `explore.config.border_color`.
Think I made these unnecessary in
https://github.com/nushell/nushell/pull/10533 and
https://github.com/nushell/nushell/pull/10270 but missed this code, my
bad. The `explore` config code is a little hard to follow because it
does so many key lookups in hashmaps.
# Description
Retrieving tests and their annotation no longer uses nu --ide-ast
spawned in a subprocess which should reduce test runner startup time.
# User-Facing Changes
# Tests + Formatting
# After Submitting
This PR removes the `line_head_top`, `line_head_bottom`, `line_shift`,
and `line_index` configuration options from `explore`. These were
previously used to control whether the horizontal+vertical lines in this
`ls | explore -i` screenshot would be displayed:
Now, all lines are displayed (same as the previous default config
values) and this is no longer configurable.
## Context
I'm continuing to chip away at `explore` when I have time. I have a
long-term goal to make `explore` simpler for users+developers. For now
I'm mostly making small incremental changes where I find underused
functionality+configuration and remove it; hopefully eventually this
will make it easier to make larger changes.
I found these specific config options a little hard to understand when
reading `explore` code, and when reading `config.nu` as a user their
behaviour+naming is not obvious. I also think that in the long term,
`explore` styling should inherit most styling from `table` instead of
having its own styling system.
The value rendering code in explore is _very_ flexible; values can be
rendered with orientation `Top`, `Left`, `Bottom`, or `Right`. The
default is `Top` for tables (header at the top) and `Left` for records
(header on the left).
This PR removes `Bottom` and `Right`; they are largely untested,
probably used by nobody, and they complicate the rendering code.
## Testing Performed
I've manually confirmed that tables and records still render the same
ass before, and the `t`/transpose command still works.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
> [!NOTE]
> This PR description originally used examples where the `generator`
closure returned a list. It has since been updated to use records
instead.
The `unfold` command allows users to dynamically generate streams of
data. The stream is generated by repeatedly invoking a `generator`
closure. The `generator` closure accepts a single argument and returns a
record containing two optional keys: 'out' and 'next'. Each invocation,
the 'out' value, if present, is added to the stream. If a 'next' key is
present, it is used as the next argument to the closure, otherwise
generation stops.
The name "unfold" is borrowed from other functional-programming
languages. Whereas `fold` (or `reduce`) takes a stream of values and
outputs a single value, `unfold` takes a single value and outputs a
stream of values.
### Examples
A common example of using `unfold` is to generate a fibbonacci sequence.
See
[here](6ffdac103c/src/sources.rs (L65))
for an example of this in rust's `itertools`.
```nushell
> unfold [0, 1] {|fib| {out: $fib.0, next: [$fib.1, ($fib.0 + $fib.1)]} } | first 10
───┬────
0 │ 0
1 │ 1
2 │ 1
3 │ 2
4 │ 3
5 │ 5
6 │ 8
7 │ 13
8 │ 21
9 │ 34
───┴────
```
This command is particularly useful when consuming paginated APIs, like
Github's. Previously, nushell users might use a loop and buffer
responses into a list, before returning all responses at once. However,
this behavior is not desirable if the result result is very large. Using
`unfold` avoids buffering and allows subsequent pipeline stages to use
the data concurrently, as it's being fetched.
#### Before
```nushell
mut pages = []
for page in 1.. {
let resp = http get (
{
scheme: https,
host: "api.github.com",
path: "/repos/nushell/nushell/issues",
params: {
page: $page,
per_page: $PAGE_SIZE
}
} | url join)
$pages = ($pages | append $resp)
if ($resp | length) < $PAGE_SIZE {
break
}
}
$pages
```
#### After
```nu
unfold 1 {|page|
let resp = http get (
{
scheme: https,
host: "api.github.com",
path: "/repos/nushell/nushell/issues",
params: {
page: $page,
per_page: $PAGE_SIZE
}
} | url join)
if ($resp | length) < $PAGE_SIZE {
{out: $resp}
} else {
{out: $resp, next: ($page + 1)}
}
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- An `unfold` generator is added to the default context.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Given the complexity of the `generator` closure's return value, it would
be good to document the semantics of `unfold` and provide some in-depth
examples showcasing what it can accomplish.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
resolves#4869
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds a `help escape` command that can be used to display a table of
string escape sequences and their outputs.
```nu
help escapes
```
```nu
help escapes -h
```
The command should also appear in the list displayed when tab
autocompleting on `help`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users can now use a new `help escapes` command to output a table of
string escape sequences and their outputs.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Need to update docs to reflect existence of the new `help escapes`
command.
# Description
Fixes: #7085
Also closes: #7526
# User-Facing Changes
After this change, we need to use `-c` flag like this:
```nushell
[[a, b, c]; [1, 2, 3]] | rename -c { a: ham }
```
But we can rename many columns easily, here is another example:
```nushell
[[a, b, c]; [1, 2, 3]] | rename -c { a: ham, b: ham2 }
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This fixes the default prompt on Windows to use the correct path
direction
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The description `Custom` doesn't really reflect meaning in the set of
`SyntaxShape`. Makes it a bit more verbose but explicit
# User-Facing Changes
Only hypothetically breaking as plugins can not effectively use a
requirement on `SyntaxShape::Custom`.
# Tests + Formatting
(-)
related to
- https://github.com/nushell/nushell/pull/10532
# Description
i was reviewing https://github.com/nushell/nushell/pull/10532 and
thought
> wait a minute, this line is huge and it's basically impossible to
review properly...
i had to grab the diff and throw some Nushell magic at it to see that it
was valid 😱
in this PR, i just split the loooooong string on the `:`, put that in a
list, join with `.join(":")` and borrow that to get a `str` 👌
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
Closes#10441
Uses `String::to_lowercase()` when the file's extension `ext` is parsed
to allow `from_decl(format!("from {ext}"))` to return the desired output
regardless of extension case.
It doesn't work with sqlite files since those are handled earlier in the
parsing but I think is good- since there's no standard file extension
used by sqlite so a user will likely want case sensitivity in that case.
This also has the (possibly undesired) effect of making `open`
completely case insensitive, e.g. `open foo.JSON` will work on a file
named `foo.json` and vice versa. This is good on Windows as it treats
`foo.json` and `foo.JSON` as the same file, but may not be the desired
behaviour on Unix.
If this behaviour is undesired I assume it would be fixed with a
`#[cfg(not(unix))]` attribute on the `to_lowercase()` operation but that
produces slightly "uglier" code that I didn't wish to submit unless
necessary.
old behaviour:
new behaviour:
# User-Facing Changes
`open` will now present a table when `open`-ing files with captitalized
extensions rather than the file's raw data
# Tests + Formatting
new test: `parses_file_with_uppercase_extension` which tests the desired
behaviour
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
This pr closes#10521.
# Description
The default prompt by nushell will replace `$nu.home-path` with `~`.
E.g. for a user named `user`, `/home/user` would become `~`. This also
works with sub paths, e.g. `/home/user/docs` would become `~/docs`.
The issue is that this replacement was a tad overzealous. A path like
`/home/user-with-suffix` would become `~-with-suffix`. This PR fixes the
issue by updating the home path detection logic.
# User-Facing Changes
The bugged behavior no longer occurs.
# Tests + Formatting
* `cargo` checks were not performed as this does not touch rust.
* The updated logic was tested against
[elvish](https://github.com/elves/elvish)'s path replacement logic, for
~10,000 randomly selected folders on a linux server. All paths were
processed the same.
# Description
This merges @horasal 's changes from #10246 and #10269Closes#10205Closes#8714
Fixes the bug that editor paths with spaces are unusable
Closes#10210Closes#10269
# User-Facing Changes
You can now either pass a string with the name of the executable or a
list with the executable and any flags to
`$env.config.buffer_editor`/`$env.EDITOR`/`$env.VISUAL`
Both the external buffer editor of reedline (by default bound to
`Ctrl-o`) and the commands `config nu` and `config env` will respect
those variables in the following order:
1. `$env.config.buffer_editor`
2. `$env.EDITOR`
3. `$env.VISUAL`
Example:
```
$env.EDITOR = "nvim" # The system-wide EDITOR is neovim
$env.config.buffer_editor = ["vim" "-p2"] # Force vim to open two tabs (not particularly useful)
$env.config.buffer_editor = null # Unset `buffer_editor` -> Uses `$env.EDITOR` ergo nvim
```
# Tests + Formatting
None
---------
Co-authored-by: Horasal <1991933+horasal@users.noreply.github.com>
# Description
Support keyboard enhancement protocol as implemented by Kitty console,
hence Kitty protocol.
This PR enables Nushell to use keybinding that is not available before,
such as Ctrl+i (that alias to Tab) or Ctrl+e (that alias to Esc, likely
I mistaken). After this PR merged and you set `use_kitty_protocol`
enabled, if your console app support Kitty protocol (WezTerm, Kitty,
etc.) you will be able to set more fine-grained keybinding.
For Colemak users, this feature is a blessing, because some Ctrl+[hjkl]
that previously unmap-able to Ctlr+[hnei] now it is.
# User-Facing Changes
This adds `use_kitty_protocol` config which defaults to false. When set
to `true`, it enables kitty protocol on the line editor when supported,
or else it warns.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Fixes#10503
Also improves link to metacharacter help;
# Description
`glob` code was using pattern as provided by user. If that had leading
`..\`, `wax::Glob` is documented to treat them as literal chars to be
matched.
Fix is to use `wax::Glob.partition()` to split such invariant prefixes
off the pattern and tack them onto the working directory computed
separately.
Before
```
> ls ..
╭───┬───────┬──────┬──────┬───────────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼───────────────┤
│ 0 │ ../r1 │ dir │ 7 B │ 3 hours ago │
│ 1 │ ../r2 │ dir │ 3 B │ a day ago │
│ 2 │ ../r3 │ dir │ 13 B │ 4 minutes ago │
╰───┴───────┴──────┴──────┴───────────────╯
> glob ../r*
╭────────────╮
│ empty list │
╰────────────╯
```
After
```
> glob ../r*
╭───┬──────────────────────────────╮
│ 0 │ /home/bobhy/src/rust/work/r2 │
│ 1 │ /home/bobhy/src/rust/work/r1 │
│ 2 │ /home/bobhy/src/rust/work/r3 │
╰───┴──────────────────────────────╯
```
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
More incremental `explore` improvements!
This PR removes the `show_cursor` config from the `explore` command, in
favour of always using the background colour to highlight the selected
cell. I believe this is a better default and I'd like to remove the
`show_cursor` functionality entirely as part of the effort to simplify
`explore`.
The style for selected cells is still configurable. I went with light
blue for the default background colour, it looks OK to me.
## Before:
## After:
# Description
Those `SyntaxShape`s can not coerce to `Value`s or `Type`s that can be
used by the user in an argument or input-output-type position.
Supporting them doesn't make sense.
# User-Facing Changes
Removal of useless "types" in argument type or input/output type
positions
# Tests + Formatting
No adjustment necessary
close#10396
# Description
Change LS_COLORS variable to bring the highlighting for .fb2 files in
line with other types of text documents
### Before
### After
# Description
Fixes#2047 but for the `doas` command the same way as in #8094
# User-Facing Changes
No breaking changes. If people not using `doas`, no difference at all.
# Tests
I have not added any tests since its using same logic as for "sudo". I
guess if something would go wrong in this part, sudo tests will cover
it?
# Additional context
As a nushell user I could not find a way to implement custom completion
for a "sudo like command". Since I can see `sudo` being hardcoded in
sources, this is what I propose.
~~Also I have almost zero knowledge of rust and this is definitely not
the clean way yet~~
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
We don't use this shape during parsing and never reference it in command
signatures. Thus it should be removed.
# User-Facing Changes
None functional.
Plugin authors that used it would never be provided with data that
specifically matched `SyntaxShape::Variable`
Builds using it will now fail.
# Tests + Formatting
NA
