Restore debian service file

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -91,6 +91,8 @@ for p in $@; do
     fi
 done
 
+cd $(dirname $0)
+
 vendor=${params[HOST]}
 
 if [ -z "$vendor" ]; then
@@ -102,7 +104,7 @@ if [ -z "$vendor" ]; then
 		vendor=redhat
 		;;
 	    debian|ubuntu)
-		ls -l /sbin/init |fgrep -q systemd | vendor=debian.systemd | vendor=debian.sysvinit
+		vendor=debian
 		;;
 	    opensuse)
 		vendor=suse
@@ -122,7 +124,6 @@ if [ -z "$vendor" ]; then
 	    params[HOST]=apple
 	    rcfile=shorewallrc.apple
 	    ;;
-
 	cygwin*|CYGWIN*)
 	    params[HOST]=cygwin
 	    rcfile=shorewallrc.cygwin
@@ -130,7 +131,7 @@ if [ -z "$vendor" ]; then
 	*)
 	    if [ -f /etc/debian_version ]; then
 		params[HOST]=debian
-		rcfile=shorewallrc.debian.sysvinit
+		ls -l /sbin/init | fgrep -q systemd &&  rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
 	    elif [ -f /etc/redhat-release ]; then
 		params[HOST]=redhat
 		rcfile=shorewallrc.redhat
@@ -143,28 +144,41 @@ if [ -z "$vendor" ]; then
 	    elif [ -f /etc/arch-release ] ; then
 		params[HOST]=archlinux
 		rcfile=shorewallrc.archlinux
+	    elif [ -f /etc/openwrt_release ]; then
+		params[HOST]=openwrt
+		rcfile=shorewallrc.openwrt
 	    else
 		params[HOST]=linux
 		rcfile=shorewallrc.default
 	    fi
 	    ;;
     esac
-
     vendor=${params[HOST]}
-elif [ $vendor = linux ]; then
-    rcfile=shorewallrc.default;
 else
-    rcfile=shorewallrc.$vendor
+    if [ $vendor = linux ]; then
+	rcfile=shorewallrc.default;
+    elif [ $vendor = debian -a -f /etc/debian_version ]; then
+	ls -l /sbin/init | fgrep -q systemd && rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
+    else
+	rcfile=shorewallrc.$vendor
+    fi
+
     if [ ! -f $rcfile ]; then
 	echo "ERROR: $vendor is not a recognized host type" >&2
 	exit 1
+    elif [ $vendor = default ]; then
+	params[HOST]=linux
+	vendor=linux
+    elif [[ $vendor == debian.* ]]; then
+	params[HOST]=debian
+	vendor=debian
     fi
 fi
 
 if [ $vendor = linux ]; then
     echo "INFO: Creating a generic Linux installation - " `date`;
 else
-    echo "INFO: Creating a ${vendor}-specific installation - " `date`;
+    echo "INFO: Creating a ${params[HOST]}-specific installation - " `date`;
 fi
 
 echo
@@ -177,6 +191,7 @@ done
 
 echo '#'                                                                 > shorewallrc
 echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
+echo "# rc file: $rcfile"                                               >> shorewallrc
 echo '#'                                                                >> shorewallrc
 
 if [ $# -gt 0 ]; then

Shorewall-core/configure.pl

@@ -52,6 +52,9 @@ for ( @ARGV ) {
     $params{$pn} = $pv;
 }
 
+use File::Basename;
+chdir dirname($0);
+
 my $vendor = $params{HOST};
 my $rcfile;
 my $rcfilename;
@@ -81,12 +84,39 @@ unless ( defined $vendor ) {
 }
 
 if ( defined $vendor ) {
-    $rcfilename = $vendor eq 'linux' ? 'shorewallrc.default' : 'shorewallrc.' . $vendor;
-    die qq("ERROR: $vendor" is not a recognized host type) unless -f $rcfilename;
+    if ( $vendor eq 'debian' && -f '/etc/debian_version' ) {
+	if ( -l '/sbin/init' ) {
+	    if ( readlink('/sbin/init') =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
+	    } else {
+		$rcfilename = 'shorewallrc.debian.sysvinit';
+	    }
+	} else {
+	    $rcfilename = 'shorewallrc.debian.sysvinit';
+	}
+    } else {
+	$rcfilename = $vendor eq 'linux' ? 'shorewallrc.default' : 'shorewallrc.' . $vendor;
+    }
+
+    unless ( -f $rcfilename ) {
+	die qq("ERROR: $vendor" is not a recognized host type);
+    } elsif ( $vendor eq 'default' ) {
+	$params{HOST} = $vendor = 'linux';
+    } elsif ( $vendor =~ /^debian\./ ) {
+	$params{HOST} = $vendor = 'debian';
+    }
 } else {
     if ( -f '/etc/debian_version' ) {
 	$vendor = 'debian';
-	$rcfilename = 'shorewallrc.debian.sysvinit';
+	if ( -l '/sbin/init' ) {
+	    if ( readlink( '/sbin/init' ) =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
+	    } else {
+		$rcfilename = 'shorewallrc.debian.sysvinit';
+	    }
+	} else {
+	    $rcfilename = 'shorewallrc.debian.sysvinit';
+	}
     } elsif ( -f '/etc/redhat-release' ){
 	$vendor = 'redhat';
 	$rcfilename = 'shorewallrc.redhat';
@@ -143,7 +173,8 @@ my $outfile;
 
 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
 
-printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n#\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+print $outfile "# rc file: $rcfilename\n#\n";
 
 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;
 

Shorewall-core/install.sh

@@ -24,6 +24,9 @@
 
 VERSION=xxx #The Build script inserts the actual version
 
+PRODUCT=shorewall-core
+Product="Shorewall Core"
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
@@ -66,15 +69,6 @@ mywhich() {
     return 2
 }
 
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
 cant_autostart()
 {
     echo
@@ -88,7 +82,20 @@ delete_file() # $1 = file to delete
 
 install_file() # $1 = source $2 = target $3 = mode
 {
-    run_install $T $OWNERSHIP -m $3 $1 ${2}
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
 }
 
 require()
@@ -96,6 +103,9 @@ require()
     eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }
 
+#
+# Change to the directory containing this script
+#
 cd "$(dirname $0)"
 
 #
@@ -181,10 +191,6 @@ done
 
 [ "${INITFILE}" != 'none/' ] && require INITSOURCE && require INITDIR
 
-T="-T"
-
-INSTALLD='-D'
-
 if [ -z "$BUILD" ]; then
     case $(uname) in
 	cygwin*|CYGWIN*)
@@ -226,6 +232,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=suse
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ] ; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -252,17 +260,15 @@ case $BUILD in
 
 	[ -z "$OWNER" ] && OWNER=root
 	[ -z "$GROUP" ] && GROUP=wheel
-	INSTALLD=
-	T=
 	;;
     *)
-	[ -z "$OWNER" ] && OWNER=root
-	[ -z "$GROUP" ] && GROUP=root
+	if [ $(id -u) -eq 0 ]; then
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
 	;;
 esac
 
-OWNERSHIP="-o $OWNER -g $GROUP"
-
 #
 # Determine where to install the firewall script
 #
@@ -276,7 +282,7 @@ case "$HOST" in
     apple)
 	echo "Installing Mac-specific configuration...";
 	;;
-    debian|gentoo|redhat|slackware|archlinux|linux|suse)
+    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
 	;;
     *)
 	echo "ERROR: Unknown HOST \"$HOST\"" >&2
@@ -305,7 +311,6 @@ if [ -n "$DESTDIR" ]; then
     if [ $BUILD != cygwin ]; then
 	if [ `id -u` != 0 ] ; then
 	    echo "Not setting file owner/group permissions, not running as root."
-	    OWNERSHIP=""
 	fi
     fi
 fi
@@ -341,8 +346,10 @@ fi
 mkdir -p ${DESTDIR}${SBINDIR}
 chmod 755 ${DESTDIR}${SBINDIR}
 
-mkdir -p ${DESTDIR}${MANDIR}
-chmod 755 ${DESTDIR}${MANDIR}
+if [ -n "${MANDIR}" ]; then
+    mkdir -p ${DESTDIR}${MANDIR}
+    chmod 755 ${DESTDIR}${MANDIR}
+fi
 
 if [ -n "${INITFILE}" ]; then
     mkdir -p ${DESTDIR}${INITDIR}
@@ -407,9 +414,9 @@ fi
 if [ ${SHAREDIR} != /usr/share ]; then
     for f in lib.*; do
 	if [ $BUILD != apple ]; then
-	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/shorewall/$f
+	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
 	else
-	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/shorewall/$f
+	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
 	fi
     done
 fi

Shorewall-core/lib.cli

@@ -25,7 +25,7 @@
 # loaded after this one and replaces some of the functions declared here.
 #
 
-SHOREWALL_CAPVERSION=40609
+SHOREWALL_CAPVERSION=50004
 
 [ -n "${g_program:=shorewall}" ]
 
@@ -143,29 +143,63 @@ timed_read ()
 }
 
 #
-# Determine if 'syslog -C' is running
+# Determine if 'syslogd -C' or logd -S is running
 #
 syslog_circular_buffer() {
     local pid
     local tty
     local flags
-    local cputime
+    local time
     local path
     local args
     local arg
 
-    ps ax 2> /dev/null | while read pid tty flags cputime path args; do
-	case $path in
-	    syslogd|*/syslogd)
-		for arg in $args; do
-		    if [ x$arg = x-C ]; then
-			echo Yes
-			return
-		    fi
-		done
-		;;
-	esac
-    done
+    ps w 2> /dev/null | (
+	while read pid tty stat time path args; do
+	    case $path in
+		syslogd|*/syslogd)
+		    for arg in $args; do
+			case $arg in
+			    -C*)
+				return 0
+				;;
+			esac
+		    done
+		    ;;
+		logd|*/logd)
+		    for arg in $args; do
+			case $arg in
+			    -S*)
+				return 0
+				;;
+			esac
+		    done
+		    ;;
+	    esac
+	done
+
+	return 1 )
+}
+
+setup_logread() {
+    [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages
+
+    if syslog_circular_buffer; then
+	LOGFILE=logread
+	if qt mywhich tac; then
+	    g_logread="logread | tac"
+	else
+	    g_logread="logread"
+	fi
+    elif [ -r $LOGFILE ]; then
+	if qt mywhich tac; then
+	    g_logread="tac $LOGFILE"
+	else
+	    g_logread="cat $LOGFILE"
+	fi
+    else
+	fatal_error "LOGFILE ($LOGFILE) does not exist or is not readable!"
+    fi
 }
 
 #
@@ -173,31 +207,59 @@ syslog_circular_buffer() {
 #
 packet_log() # $1 = number of messages
 {
-    if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
-	if [ $g_family -eq 4 ]; then
-	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | head -n$1 | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+    if qt mywhich tac; then
+	if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
+	    if [ $g_family -eq 4 ]; then
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | head -n$1 | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	    else
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' | head -n$1 | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    fi
+	elif [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  head -n$1 | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
 	else
-	    $g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' | head -n$1 | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' |  head -n$1 | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
 	fi
-    elif [ $g_family -eq 4 ]; then
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  head -n$1 | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
     else
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' |  head -n$1 | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
-    fi
+	if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
+	    if [ $g_family -eq 4 ]; then
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | tail -n$1 | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	    else
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' | tail -n$1 | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    fi
+	elif [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  tail -n$1 | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
+	else
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' |  tail -n$1 | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	fi
+    fi	
 }
 
 search_log() # $1 = IP address to search for
 {
-    if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
-        if [ $g_family -eq 4 ]; then
-	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+    if qt mywhich tac; then
+	if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
+            if [ $g_family -eq 4 ]; then
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	    else
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    fi
+	elif [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
 	else
-	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
 	fi
-    elif [ $g_family -eq 4 ]; then
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
     else
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
+            if [ $g_family -eq 4 ]; then
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	    else
+		$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	    fi
+	elif [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
+	else
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	fi
     fi
 }
 
@@ -280,17 +342,7 @@ show_bl() {
 logwatch() # $1 = timeout -- if negative, prompt each time that
 	   #		     an 'interesting' packet count changes
 {
-    if [ -z "$LOGFILE" ]; then
-	LOGFILE=/var/log/messages
-
-	if [ -n "$(syslog_circular_buffer)" ]; then
-	    g_logread="logread | tac"
-	elif [ -r $LOGFILE ]; then
-	    g_logread="tac $LOGFILE"
-	else
-	    fatal_error "LOGFILE ($LOGFILE) does not exist!"
-	fi
-    fi
+    setup_logread
 
     host=$(echo $g_hostname | sed 's/\..*$//')
     oldrejects=$($g_tool -L -v -n | grep 'LOG')
@@ -1000,11 +1052,13 @@ show_command() {
 		conntrack -f ipv6 -L $@ | show_connections_filter
 	    else
 		[ $# -gt 1 ] && usage 1
-		local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
-		local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
-		echo "$g_product $SHOREWALL_VERSION Connections ($count of $max) at $g_hostname - $(date)"
-		echo
-		grep '^ipv6' /proc/net/nf_conntrack | sed -r 's/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | show_connections_filter
+		if [ -f /proc/sys/net/netfilter/nf_conntrack_count -a -f /proc/sys/net/nf_conntrack ]; then
+		    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+		    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+		    echo "$g_product $SHOREWALL_VERSION Connections ($count of $max) at $g_hostname - $(date)"
+		    echo
+		    grep '^ipv6' /proc/net/nf_conntrack | sed -r 's/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | show_connections_filter
+		fi
 	    fi
 	    ;;
 	nat)
@@ -1038,17 +1092,7 @@ show_command() {
 	log)
 	    [ $# -gt 2 ] && usage 1
 
-	    if [ -z "$LOGFILE" ]; then
-		LOGFILE=/var/log/messages
-
-		if [ -n "$(syslog_circular_buffer)" ]; then
-		    g_logread="logread | tac"
-		elif [ -r $LOGFILE ]; then
-		    g_logread="tac $LOGFILE"
-		else
-		    fatal_error "LOGFILE ($LOGFILE) does not exist!"
-		fi
-	    fi
+	    setup_logread
 
 	    echo "$g_product $SHOREWALL_VERSION Log ($LOGFILE) at $g_hostname - $(date)"
 	    echo
@@ -1427,17 +1471,7 @@ do_dump_command() {
 	esac
     done
 
-    if [ -z "$LOGFILE" ]; then
-	LOGFILE=/var/log/messages
-
-	if [ -n "$(syslog_circular_buffer)" ]; then
-	    g_logread="logread | tac"
-	elif [ -r $LOGFILE ]; then
-	    g_logread="tac $LOGFILE"
-	else
-	    fatal_error "LOGFILE ($LOGFILE) does not exist! - See http://www.shorewall.net/shorewall_logging.html"
-	fi
-    fi
+    setup_logread
 
     g_ipt_options="$g_ipt_options $g_ipt_options1"
 
@@ -1592,7 +1626,7 @@ do_dump_command() {
 
     echo
 
-    ss -${g_family}tunap
+    qt mywhich ss && ss -${g_family}tunap || { qt mywhich netstat && netatat -tunap; }
 
     if [ -n "$TC_ENABLED" ]; then
 	heading "Traffic Control"
@@ -2559,6 +2593,7 @@ determine_capabilities() {
     TARPIT_TARGET=
     IFACE_MATCH=
     TCPMSS_TARGET=
+    WAIT_OPTION=
 
     AMANDA_HELPER=
     FTP_HELPER=
@@ -2582,6 +2617,11 @@ determine_capabilities() {
 	qt $arptables -L OUT && ARPTABLESJF=Yes
     fi
 
+    if qt $g_tool --wait -t filter -L INPUT -n -v; then
+	WAIT_OPTION=Yes
+	tool="$tool --wait"
+    fi
+
     chain=fooX$$
 
     if [ -n "$NAT_ENABLED" ]; then
@@ -3040,8 +3080,10 @@ report_capabilities_unsorted() {
 
     if [ $g_family -eq 4 ]; then
 	report_capability "iptables -S (IPTABLES_S)" $IPTABLES_S
+	report_capability "iptables --wait option (WAIT_OPTION)" $WAIT_OPTION
     else
 	report_capability "ip6tables -S (IPTABLES_S)" $IPTABLES_S
+	report_capability "ip6tables --wait option (WAIT_OPTION)" $WAIT_OPTION
     fi
 
     report_capability "Basic Filter (BASIC_FILTER)" $BASIC_FILTER
@@ -3151,6 +3193,7 @@ report_capabilities_unsorted1() {
     report_capability1 TARPIT_TARGET
     report_capability1 IFACE_MATCH
     report_capability1 TCPMSS_TARGET
+    report_capability1 WAIT_OPTION
 
     report_capability1 AMANDA_HELPER
     report_capability1 FTP_HELPER
@@ -3495,10 +3538,34 @@ noiptrace_command() {
 	fatal_error "$g_product is not started"
     fi
 }
+
 #
-# Set the configuration variables from shorewall-lite.conf
+# Verify that we have a compiled firewall script
+#
+verify_firewall_script() {
+    if [ ! -f $g_firewall ]; then
+	echo "   ERROR: $g_product is not properly installed" >&2
+	if [ -L $g_firewall ]; then
+	    echo "          $g_firewall is a symbolic link to a" >&2
+	    echo "          non-existant file" >&2
+	else
+	    echo "          The file $g_firewall does not exist" >&2
+	fi
+
+	exit 2
+    fi
+}
+
+################################################################################
+# The remaining functions are used by the Lite cli - they are overloaded by
+# the Standard CLI by loading lib.cli-std
+################################################################################
+#
+# Set the configuration variables from shorewall[6]-lite.conf.
 #
 get_config() {
+    local config
+    local lib
 
     ensure_config_path
 
@@ -3520,15 +3587,7 @@ get_config() {
 
     [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 
-    [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages
-
-    if ( ps ax 2> /dev/null | grep -v grep |  qt grep 'syslogd.*-C' ) ; then
-	g_logread="logread | tac"
-    elif [ -r $LOGFILE ]; then
-	g_logread="tac $LOGFILE"
-    else
-	fatal_error "LOGFILE ($LOGFILE) does not exist!"
-    fi
+    setup_logread
     #
     # See if we have a real version of "tail" -- use separate redirection so
     # that ash (aka /bin/sh on LRP) doesn't crap
@@ -3636,29 +3695,11 @@ get_config() {
 
     g_loopback=$(find_loopback_interfaces)
 
+    lib=$(find_file lib.cli-user)
+
+    [ -f $lib ] && . $lib
+
 }
-
-#
-# Verify that we have a compiled firewall script
-#
-verify_firewall_script() {
-    if [ ! -f $g_firewall ]; then
-	echo "   ERROR: $g_product is not properly installed" >&2
-	if [ -L $g_firewall ]; then
-	    echo "          $g_firewall is a symbolic link to a" >&2
-	    echo "          non-existant file" >&2
-	else
-	    echo "          The file $g_firewall does not exist" >&2
-	fi
-
-	exit 2
-    fi
-}
-
-################################################################################
-# The remaining functions are used by the Lite cli - they are overloaded by
-# the Standard CLI by loading lib.cli-std
-################################################################################
 #
 # Start Command Executor
 #
@@ -3885,6 +3926,13 @@ usage() # $1 = exit status
     ecko "   refresh [ -d ] [ -n ] [ -T ] [ -D <directory> ] [ <chain>... ]"
     echo "   reject <address> ..."
     ecko "   reload [ -s ] [ -c ] [ -r <root user> ] [ -T ] [ -i ] [ <directory> ] <system>"
+
+    if [ -z "$g_lite" ]; then
+	echo "   remote-reload [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-restart [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-start [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+    fi
+
     echo "   reset [ <chain> ... ]"
 
     if [ -n "$g_lite" ]; then

Shorewall-core/lib.common

@@ -33,7 +33,7 @@ startup_error() # $* = Error Message
     echo "   ERROR: $@: Firewall state not changed" >&2
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%_b %d %T') "
+        timestamp="$(date +'%b %d %T') "
         echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
     fi
 
@@ -50,7 +50,7 @@ startup_error() # $* = Error Message
     esac
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%_b %d %T') "
+        timestamp="$(date +'%b %d %T') "
 
 	case $COMMAND in
 	    start)
@@ -316,6 +316,7 @@ reload_kernel_modules() {
     local moduleloader
     moduleloader=modprobe
     local uname
+    local extras
 
     if ! qt mywhich modprobe; then
 	moduleloader=insmod
@@ -323,9 +324,25 @@ reload_kernel_modules() {
 
     [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
 
-    [ -z "$MODULESDIR" ] && \
-	uname=$(uname -r) && \
+    if [ -n "$MODULESDIR" ]; then
+	case "$MODULESDIR" in
+	    +*)
+		extras="$MODULESDIR"
+		extras=${extras#+}
+		MODULESDIR=
+		;;
+	esac
+    fi
+
+    if [ -z "$MODULESDIR" ]; then
+	uname=$(uname -r)
 	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	if [ -n "$extras" ]; then
+	    for directory in $(split "$extras"); do
+		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
+	    done
+	fi
+    fi
 
     [ -d /sys/module/ ] || MODULES=$(lsmod | cut -d ' ' -f1)
 
@@ -355,6 +372,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
     local savemoduleinfo
     savemoduleinfo=${1:-Yes} # So old compiled scripts still work
     local uname
+    local extras
 
     if ! qt mywhich modprobe; then
 	moduleloader=insmod
@@ -362,9 +380,25 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 
     [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
 
-    [ -z "$MODULESDIR" ] && \
-	uname=$(uname -r) && \
+    if [ -n "$MODULESDIR" ]; then
+	case "$MODULESDIR" in
+	    +*)
+		extras="$MODULESDIR"
+		extras=${extras#+}
+		MODULESDIR=
+		;;
+	esac
+    fi
+
+    if [ -z "$MODULESDIR" ]; then
+	uname=$(uname -r)
 	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	if [ -n "$extras" ]; then
+	    for directory in $(split "$extras"); do
+		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
+	    done
+	fi
+    fi
 
     for directory in $(split $MODULESDIR); do
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
@@ -709,12 +743,15 @@ mutex_on()
     local lockf
     lockf=${LOCKFILE:=${VARDIR}/lock}
     local lockpid
+    local lockd
 
     MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}
 
     if [ $MUTEX_TIMEOUT -gt 0 ]; then
 
-	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}
+	lockd=$(dirname $LOCKFILE)
+
+	[ -d "$lockd" ] || mkdir -p "$lockd"
 
 	if [ -f $lockf ]; then
 	    lockpid=`cat ${lockf} 2> /dev/null`
@@ -734,6 +771,11 @@ mutex_on()
 	    chmod u+w ${lockf}
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
+	elif qt mywhich lock; then
+            lock -${MUTEX_TIMEOUT} -r1 ${lockf}
+            chmod u+w ${lockf}
+            echo $$ > ${lockf}
+            chmod u-w ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1

Shorewall-core/shorewallrc.openwrt

@@ -0,0 +1,23 @@
+#
+# Created by Shorewall Core version 5.0.2-RC1 configure -  Fri, Nov 06, 2015 10:02:03 AM
+#
+# Input: host=openwrt
+#
+PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall    #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                            #Directory where subsystem configurations are installed
+SBINDIR=/sbin                           #Directory where system administration programs are installed
+MANDIR=                                 #Directory where manpages are installed.
+INITDIR=/etc/init.d                     #Directory where SysV init scripts are installed.
+INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITSOURCE=init.openwrt.sh              #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                              #If non-zero, annotated configuration files are installed
+SYSCONFDIR=${CONFDIR}/sysconfig         #Directory where SysV init parameter files are installed
+SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
+SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/lib                             #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.

Shorewall-core/uninstall.sh

@@ -27,7 +27,9 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx #The Build script inserts the actual version
-
+PRODUCT="shorewall-core"
+Product="Shorewall Core"
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
@@ -66,6 +68,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 #
 # Read the RC file
 #

Shorewall-init/init.openwrt.sh

@@ -0,0 +1,131 @@
+#!/bin/sh /etc/rc.common
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#
+#     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)
+#
+#       On most distributions, this file should be called /etc/init.d/shorewall-init.
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+#
+
+# arg1 of init script is arg2 when rc.common is sourced
+
+case "$action" in
+  start|stop|boot)
+      if [ "$(id -u)" != "0" ]
+      then
+	  echo "You must be root to start, stop or restart \"Shorewall \"."
+	  exit 1
+      fi
+
+      # check if shorewall-init is configured or not
+      if [ -f "/etc/sysconfig/shorewall-init" ]
+      then
+	  . /etc/sysconfig/shorewall-init
+	  if [ -z "$PRODUCTS" ]
+	  then
+	      exit 0
+	  fi
+      else
+	  exit 0
+      fi
+
+      ;;
+  enable|disable|enabled)
+      # Openwrt related
+      # start and stop runlevel variable
+      START=19
+      STOP=91
+      ;;
+  *)
+      echo "Usage: /etc/init.d/shorewall-init {start|stop}"
+      exit 1
+esac
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+# Locate the current PRODUCT's statedir
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . ${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
+    else
+	return 0
+    fi
+}
+
+# Initialize the firewall
+start () {
+    local PRODUCT
+  local STATEDIR
+
+  echo -n "Initializing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
+	  fi
+      fi
+  done
+
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+      ipset -R < "$SAVE_IPSETS"
+  fi
+}
+
+boot () {
+    start
+}
+
+# Clear the firewall
+stop () {
+    local PRODUCT
+    local STATEDIR
+
+    echo -n "Clearing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
+	fi
+    done
+
+    if [ -n "$SAVE_IPSETS" ]; then
+	mkdir -p $(dirname "$SAVE_IPSETS")
+	if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	fi
+    fi
+}
+

Shorewall-init/install.sh

@@ -28,6 +28,8 @@
 #
 
 VERSION=xxx #The Build script inserts the actual version.
+PRODUCT=shorewall-init
+Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
@@ -71,39 +73,50 @@ mywhich() {
     return 2
 }
 
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
 cant_autostart()
 {
     echo
     echo  "WARNING: Unable to configure shorewall init to start automatically at boot" >&2
 }
 
+install_file() # $1 = source $2 = target $3 = mode
+{
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
+}
+
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 0755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+}
+
 require() 
 {
     eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }
 
-install_file() # $1 = source $2 = target $3 = mode
-{
-    run_install $T $OWNERSHIP -m $3 $1 ${2}
-}
-
+#
+# Change to the directory containing this script
+#
 cd "$(dirname $0)"
 
-PRODUCT=shorewall-init
-
 #
 # Parse the run line
 #
-T='-T'
 
 finished=0
 configure=1
@@ -230,6 +243,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=slackware
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ]; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -237,22 +252,24 @@ if [ -z "$BUILD" ]; then
     esac
 fi
 
-[ -n "$OWNER" ] || OWNER=$(id -un)
-[ -n "$GROUP" ] || GROUP=$(id -gn)
-
 case $BUILD in
     apple)
-	T=
-	;;
-    debian|gentoo|redhat|suse|slackware|archlinux)
+	[ -z "$OWNER" ] && OWNER=root
+	[ -z "$GROUP" ] && GROUP=wheel
 	;;
+    cygwin*|CYGWIN*)
+	OWNER=$(id -un)
+	GROUP=$(id -gn)
+ 	;;
     *)
-	[ -n "$BUILD" ] && echo "ERROR: Unknown BUILD environment ($BUILD)" >&2 || echo "ERROR: Unknown BUILD environment"
-	exit 1
+	if [ $(id -u) -eq 0 ]; then
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
 	;;
 esac
 
-OWNERSHIP="-o $OWNER -g $GROUP"
+[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
 
 [ -n "$HOST" ] || HOST=$BUILD
 
@@ -277,6 +294,9 @@ case "$HOST" in
     suse)
 	echo "Installing SuSE-specific configuration..."
 	;;
+    openwrt)
+	echo "Installing Openwrt-specific configuration..."
+	;;
     linux)
 	echo "ERROR: Shorewall-init is not supported on this system" >&2
 	exit 1
@@ -290,12 +310,12 @@ esac
 [ -z "$TARGET" ] && TARGET=$HOST
 
 if [ -n "$DESTDIR" ]; then
-    if [ `id -u` != 0 ] ; then
+    if [ $(id -u) != 0 ] ; then
 	echo "Not setting file owner/group permissions, not running as root."
 	OWNERSHIP=""
     fi
     
-    install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
+    make_directory ${DESTDIR}${INITDIR} 0755
 fi
 
 echo "Installing Shorewall Init Version $VERSION"
@@ -311,7 +331,7 @@ fi
 
 if [ -n "$DESTDIR" ]; then
     mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
-    chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 0755 ${DESTDIR}${CONFDIR}/logrotate.d
 fi
 
 #
@@ -339,14 +359,14 @@ fi
 if [ -n "$SERVICEDIR" ]; then
     mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
     if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${SBINDIR}
-        chmod 755 ${DESTDIR}${SBINDIR}
+        chmod 0755 ${DESTDIR}${SBINDIR}
     fi
-    run_install $OWNERSHIP -m 700 shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init
+    install_file shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init 0700
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall-init
     echo "CLI installed as ${DESTDIR}${SBINDIR}/shorewall-init"
 fi
@@ -355,13 +375,13 @@ fi
 # Create /usr/share/shorewall-init if needed
 #
 mkdir -p ${DESTDIR}${SHAREDIR}/shorewall-init
-chmod 755 ${DESTDIR}${SHAREDIR}/shorewall-init
+chmod 0755 ${DESTDIR}${SHAREDIR}/shorewall-init
 
 #
 # Install logrotate file
 #
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -369,7 +389,7 @@ fi
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/shorewall-init/version
-chmod 644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
+chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
 
 #
 # Remove and create the symbolic link to the init script
@@ -397,6 +417,7 @@ if [ $HOST = debian ]; then
 
 	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
 	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
+	echo "sysconfig file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     IFUPDOWN=ifupdown.debian.sh
@@ -411,6 +432,9 @@ else
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
+	    elif [ $HOST = openwrt ]; then
+		# Not implemented on openwrt
+		/bin/true
 	    else
 		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
 	    fi
@@ -418,8 +442,8 @@ else
     fi
 
     if [ -n "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
-	run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT
-	echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+	install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT 0644
+	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     [ $HOST = suse ] && IFUPDOWN=ifupdown.suse.sh || IFUPDOWN=ifupdown.fedora.sh
@@ -429,13 +453,15 @@ fi
 # Install the ifupdown script
 #
 
-cp $IFUPDOWN ifupdown
+if [ $HOST != openwrt ]; then
+    cp $IFUPDOWN ifupdown
 
-[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
+    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
 
-mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
+    mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 
-install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
+    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
+fi
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
     [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
@@ -488,9 +514,13 @@ case $HOST in
 esac
 
 if [ -z "$DESTDIR" ]; then
-    if [ $configure -eq 1 -a -n "$first_install" ]; then
+    if [ $configure -eq 1 -a -n "first_install" ]; then
 	if [ $HOST = debian ]; then
-	    if mywhich insserv; then
+	    if [ -n "$SERVICEDIR" ]; then
+		if systemctl enable ${PRODUCT}.service; then
+                    echo "Shorewall Init will start automatically at boot"
+		fi
+	    elif mywhich insserv; then
 		if insserv ${INITDIR}/shorewall-init; then
 		    echo "Shorewall Init will start automatically at boot"
 		else
@@ -506,6 +536,13 @@ if [ -z "$DESTDIR" ]; then
 	    else
 		cant_autostart
 	    fi
+	elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+	    /etc/init.d/$PRODUCT enable
+	    if /etc/init.d/$PRODUCT enabled; then
+		echo "$Product will start automatically at boot"
+	    else
+		cant_autostart
+	    fi
 	elif [ $HOST = gentoo ]; then
 	    # On Gentoo, a service must be enabled manually by the user,
 	    # not by the installer
@@ -534,6 +571,13 @@ if [ -z "$DESTDIR" ]; then
 		else
 		    cant_autostart
 		fi
+	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+		/etc/init.d/shorewall-inir enable
+		if /etc/init.d/shorewall-init enabled; then
+		    echo "Shorrewall Init will start automatically at boot"
+		else
+		    cant_autostart
+		fi
 	    else
 		cant_autostart
 	    fi
@@ -554,7 +598,7 @@ fi
 
 [ -z "${DESTDIR}" ] && [ ! -f ~/.shorewallrc ] && cp ${SHAREDIR}/shorewall/shorewallrc .
 
-if [ -f ${DESTDIR}/etc/ppp ]; then
+if [ -d ${DESTDIR}/etc/ppp ]; then
     case $HOST in
 	debian|suse)
 	    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do

Shorewall-init/shorewall-init.service

@@ -5,7 +5,8 @@
 #
 [Unit]
 Description=Shorewall firewall (bootup security)
-Before=network.target
+Before=network-pre.target
+Wants=network-pre.target
 
 [Service]
 Type=oneshot

Shorewall-init/shorewall-init.service.214

@@ -1,20 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network-pre.target
-Wants=network-pre.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target

Shorewall-init/shorewall-init.service.214.debian

@@ -1,21 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network-pre.target
-Wants=network-pre.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/default/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target

Shorewall-init/uninstall.sh

@@ -27,6 +27,8 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx  #The Build script inserts the actual version
+PRODUCT=shorewall-init
+Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
@@ -75,6 +77,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 finished=0
 configure=1
 
@@ -162,7 +169,11 @@ INITSCRIPT=${CONFDIR}/init.d/shorewall-init
 
 if [ -f "$INITSCRIPT" ]; then
     if [ $configure -eq 1 ]; then
-	if mywhich updaterc.d ; then
+	if [ $HOST = openwrt ]; then
+	    if /etc/init.d/shorewall-init enabled; then
+		/etc/init.d/shorewall-init disable
+	    fi
+	elif mywhich updaterc.d ; then
 	    updaterc.d shorewall-init remove
 	elif mywhich insserv ; then
             insserv -r $INITSCRIPT
@@ -174,13 +185,22 @@ if [ -f "$INITSCRIPT" ]; then
     remove_file $INITSCRIPT
 fi
 
-if [ -n "$SYSTEMD" ]; then
-    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
-    rm -f $SYSTEMD/shorewall-init.service
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
 fi
 
-[ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
-[ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+if [ -n "$SERVICEDIR" ]; then
+    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
+    rm -f $SERVICEDIR/shorewall-init.service
+fi
+
+if [ $HOST = openwrt ]; then
+    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+else
+    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+fi
 
 remove_file ${CONFDIR}/default/shorewall-init
 remove_file ${CONFDIR}/sysconfig/shorewall-init
@@ -194,16 +214,16 @@ remove_file ${CONFDIR}/network/if-post-down.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-up.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-down.d/shorewall
 
-[ -n "$SYSTEMD" ] && remove_file ${SYSTEMD}/shorewall.service
-
 if [ -d ${CONFDIR}/ppp ]; then
     for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
 	remove_file ${CONFDIR}/ppp/$directory/shorewall
     done
 
     for file in if-up.local if-down.local; do
-	if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
-	    remove_file ${CONFDIR}/ppp/$FILE
+	if [ -f ${CONFDIR}/ppp/$file ]; then
+	    if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
+		remove_file ${CONFDIR}/ppp/$FILE
+	    fi
 	fi
     done
 fi

Shorewall-lite/init.openwrt.sh

@@ -0,0 +1,97 @@
+#!/bin/sh /etc/rc.common
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)
+#
+#	On most distributions, this file should be called /etc/init.d/shorewall.
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#	If an error occurs while starting or restarting the firewall, the
+#	firewall is automatically stopped.
+#
+#	Commands are:
+#
+#	   shorewall-lite start			  Starts the firewall
+#	   shorewall-lite restart		  Restarts the firewall
+#	   shorewall-lite reload		  Reload the firewall
+#	   shorewall-lite stop			  Stops the firewall
+#	   shorewall-lite status		  Displays firewall status
+#
+
+# description: Packet filtering firewall
+
+# Product name variable
+PRODUCT=shorewall-lite
++
+# Openwrt related
+# start and stop runlevel variable
+START=50
+STOP=89
+# variable to display what the status command do when /etc/init.d/shorewall-lite is invoke without argument
+EXTRA_COMMANDS="status"
+EXTRA_HELP="status displays shorewall status"
+
+################################################################################
+# Get startup options (override default)
+################################################################################
+OPTIONS=
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f ${SYSCONFDIR}/$PRODUCT ]; then
+    . ${SYSCONFDIR}/$PRODUCT
+fi
+
+SHOREWALL_INIT_SCRIPT=1
+
+################################################################################
+# E X E C U T I O N    B E G I N S   H E R E				       #
+################################################################################
+# arg1 of init script is arg2 when rc.common is sourced; set to action variable
+command="$action"
+
+start() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STARTOPTIONS
+}
+
+boot() {
+local command="start"
+start
+}
+
+restart() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RESTARTOPTIONS
+}
+
+reload() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RELOADOPTION
+}
+
+stop() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STOPOPTIONS
+}
+
+status() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STATUSOPTIONS
+}

Shorewall-lite/install.sh

@@ -67,15 +67,6 @@ mywhich() {
     return 2
 }
 
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
 cant_autostart()
 {
     echo
@@ -89,7 +80,28 @@ delete_file() # $1 = file to delete
 
 install_file() # $1 = source $2 = target $3 = mode
 {
-    run_install $T $OWNERSHIP -m $3 $1 ${2}
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
+}
+
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+
 }
 
 require()
@@ -187,7 +199,7 @@ elif [ -z "${VARDIR}" ]; then
     VARDIR=${VARLIB}/${PRODUCT}
 fi
 
-for var in SHAREDIR LIBEXECDIRDIRDIR CONFDIR SBINDIR VARLIB VARDIR; do
+for var in SHAREDIR LIBEXECDIR CONFDIR SBINDIR VARLIB VARDIR; do
     require $var
 done
 
@@ -201,8 +213,6 @@ PATH=${SBINDIR}:/bin:/usr${SBINDIR}:/usr/bin:/usr/local/bin:/usr/local${SBINDIR}
 # Determine where to install the firewall script
 #
 cygwin=
-INSTALLD='-D'
-T='-T'
 
 if [ -z "$BUILD" ]; then
     case $(uname) in
@@ -245,6 +255,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=slackware
 	    elif [ -f ${CONFDIR}/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ]; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -260,16 +272,16 @@ case $BUILD in
     apple)
 	[ -z "$OWNER" ] && OWNER=root
 	[ -z "$GROUP" ] && GROUP=wheel
-	INSTALLD=
-	T=
 	;;
     *)
-	[ -z "$OWNER" ] && OWNER=root
-	[ -z "$GROUP" ] && GROUP=root
+	if [ $(id -u) -eq 0 ]; then
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
 	;;
 esac
 
-OWNERSHIP="-o $OWNER -g $GROUP"
+[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
 
 [ -n "$HOST" ] || HOST=$BUILD
 
@@ -300,6 +312,9 @@ case "$HOST" in
     suse)
 	echo "Installing Suse-specific configuration..."
 	;;
+    openwrt)
+	echo "Installing OpenWRT-specific configuration..."
+	;;
     linux)
 	;;
     *)
@@ -316,8 +331,9 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
 
-    install -d $OWNERSHIP -m 755 ${DESTDIR}/${SBINDIR}
-    install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
+    make_directory ${DESTDIR}${SBINDIR} 755
+    make_directory ${DESTDIR}${INITDIR} 755
+
 else
     if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
 	echo "$PRODUCT $VERSION requires Shorewall Core which does not appear to be installed" >&2
@@ -357,7 +373,7 @@ fi
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
 install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
-[ -n "${INITFILE}" ] && install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
+[ -n "${INITFILE}" ] && make_directory ${DESTDIR}${INITDIR} 755
 
 echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
 
@@ -399,7 +415,7 @@ fi
 if [ -n "$SERVICEDIR" ]; then
     mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
@@ -421,9 +437,9 @@ fi
 #
 # Install the  Makefile
 #
-run_install $OWNERSHIP -m 0600 Makefile ${DESTDIR}${CONFDIR}/$PRODUCT
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${CONFDIR}/$PRODUCT/Makefile
-[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}/${CONFDIR}/$PRODUCT/Makefile
+install_file Makefile ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile 0600
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
+[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
 echo "Makefile installed as ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile"
 
 #
@@ -438,7 +454,7 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 for f in lib.* ; do
     if [ -f $f ]; then
 	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-	echo "Library ${f#*.} file installed as ${DESTDIR}/${SHAREDIR}/$PRODUCT/$f"
+	echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
     fi
 done
 
@@ -451,7 +467,7 @@ echo "Common functions linked through ${DESTDIR}${SHAREDIR}/$PRODUCT/functions"
 #
 
 install_file shorecap ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap 0755
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${LIBEXECDIR}/$PRODUCT/shorecap
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap
 
 echo
 echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap"
@@ -461,17 +477,17 @@ echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shor
 #
 
 if [ -f modules ]; then
-    run_install $OWNERSHIP -m 0600 modules ${DESTDIR}${SHAREDIR}/$PRODUCT
+    install_file modules ${DESTDIR}${SHAREDIR}/$PRODUCT/modules 0600
     echo "Modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/modules"
 fi
 
 if [ -f helpers ]; then
-    run_install $OWNERSHIP -m 0600 helpers ${DESTDIR}${SHAREDIR}/$PRODUCT
+    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 600
     echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
 fi
 
 for f in modules.*; do
-    run_install $OWNERSHIP -m 0644 $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f
+    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 644
     echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
 done
 
@@ -482,17 +498,17 @@ done
 if [ -d manpages ]; then
     cd manpages
 
-    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
+    mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
 
     for f in *.5; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
     for f in *.8; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
@@ -502,7 +518,7 @@ if [ -d manpages ]; then
 fi
 
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 644
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -533,13 +549,13 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
 	chmod 755 ${DESTDIR}${SYSCONFDIR}
     fi
 
-    run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT}
+    install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
     echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ ${SHAREDIR} != /usr/share ]; then
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/${PRODUCT}/lib.base
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SBINDIR}/$PRODUCT
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
@@ -587,6 +603,13 @@ if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${
 	else
 	    cant_autostart
 	fi
+    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+	/etc/init.d/$PRODUCT enable
+	if /etc/init.d/$PRODUCT enabled; then
+            echo "$PRODUCT will start automatically at boot"
+	else
+            cant_autostart
+	fi
     elif [ "$INITFILE" != rc.${PRODUCT} ]; then #Slackware starts this automatically
 	cant_autostart
     fi

Shorewall-lite/shorewall-lite.service.214

@@ -1,21 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv4 firewall (lite)
-Wants=network-online.target
-After=network-online.target
-Conflicts=iptables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall-lite
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall-lite $OPTIONS stop
-
-[Install]
-WantedBy=basic.target

Shorewall-lite/sysconfig

@@ -0,0 +1,25 @@
+# sysV init file script configuration(/etc/sysconfdir/shorewall-lite)
+
+# startup option(default "-vvv")
+OPTIONS=
+
+# change default start run level(if none empty; /etc/init.d/shorewall-lite enable)
+START=50
+
+# change default stop run level(if none empty; /etc/init.d/shorewall-lite enable)
+STOP=
+
+# option to pass when shorewall start is executed
+STARTOPTIONS=
+
+# option to pass when shorewall restart is executed
+RESTARTOPTIONS=
+
+# option to pass when shorewall reload is executed
+RELOADOPTIONS=
+
+# option to pass when shorewall stop is executed
+STOPOPTIONS=
+
+# option to pass when shorewall status is executed
+STATUSOPTIONS=

Shorewall-lite/uninstall.sh

@@ -28,6 +28,7 @@
 
 VERSION=xxx  #The Build script inserts the actual version
 PRODUCT=shorewall-lite
+Product="Shorewall Lite"
 
 usage() # $1 = exit status
 {
@@ -168,7 +169,15 @@ if [ $configure -eq 1 ]; then
 fi
 
 if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
-    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
+    if [ $HOST = openwrt ]; then
+	if [ $configure -eq 1 ] && /etc/init.d/shorewall-lite enabled; then
+	    /etc/init.d/shorewall-lite disable
+	fi
+	
+	FIREWALL=$(readlink ${SHAREDIR}/shorewall-lite/init)
+    else
+	FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
+    fi
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
 fi
@@ -187,21 +196,26 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-if [ -n "$SYSTEMD" ]; then
+[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
+
+if [ -n "$SERVICEDIR" ]; then
     [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
-    rm -f $SYSTEMD/shorewall-lite.service
+    rm -f $SERVICEDIR/shorewall-lite.service
 fi
 
 rm -f ${SBINDIR}/shorewall-lite
 
 rm -rf ${CONFDIR}/shorewall-lite
-rm -rf ${VARDIR}/shorewall-lite
+rm -rf ${VARDIR}
 rm -rf ${SHAREDIR}/shorewall-lite
 rm -rf ${LIBEXECDIR}/shorewall-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
+rm -f  ${SYSCONFDIR}/shorewall-lite
 
-rm -f ${MANDIR}/man5/shorewall-lite*
-rm -f ${MANDIR}/man8/shorewall-lite*
+if [ -n "${MANDIR}" ]; then
+    rm -f ${MANDIR}/man5/shorewall-lite*
+    rm -f ${MANDIR}/man8/shorewall-lite*
+fi
 
 echo "Shorewall Lite Uninstalled"
 

Shorewall/Perl/Shorewall/Accounting.pm

@@ -291,7 +291,8 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 			    '' ,
 			    $target ,
 			    '' ,
-			    $disposition ,
+		            $disposition ,
+		            '' ,
 			    ''  );
 	    }
 	}
@@ -386,6 +387,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 	$target ,
 	'' ,
 	$disposition ,
+	'' ,
 	'' ;
 
     if ( $rule2 || $jump ) {
@@ -414,7 +416,8 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 		    '' ,
 		    '' ,
 		    '' ,
-		    '' ,
+	            '' ,
+	            '' ,
 		    '' );
     }
 

Shorewall/Perl/Shorewall/Chains.pm

@@ -6242,7 +6242,7 @@ sub log_rule_limit( $$$$$$$$ ) {
 		if ( $tag =~ /^,/ ) {
 		    ( $disposition = $tag ) =~ s/,//;
 		} elsif ( $tag =~ /,/ ) {
-		    ( $chain, $disposition ) = split ',', $tag;
+		    ( $chain, $disposition ) = split ',', $tag, 2;
 		} else { 
 		    $chain = $tag;
 		}
@@ -6336,7 +6336,7 @@ sub log_irule_limit( $$$$$$$@ ) {
 		if ( $tag =~ /^,/ ) {
 		    ( $disposition = $tag ) =~ s/,//;
 		} elsif ( $tag =~ /,/ ) {
-		    ( $chain, $disposition ) = split ',', $tag;
+		    ( $chain, $disposition ) = split ',', $tag, 2;
 		} else { 
 		    $chain = $tag;
 		}
@@ -6562,6 +6562,8 @@ sub set_chain_variables() {
 	emit( 'g_tool=$IP6TABLES' );
     }
 
+    emit 'g_tool="$g_tool --wait"' if have_capability 'WAIT_OPTION';
+
     if ( $config{IP} ) {
 	emit( qq(IP="$config{IP}") ,
 	      '[ -x "$IP" ] || startup_error "IP=$IP does not exist or is not executable"'
@@ -7031,7 +7033,7 @@ sub isolate_source_interface( $ ) {
 	    $inets  = $2;
 	} elsif ( $source =~ /^(.+?):\[(.+)\]\s*$/ ||
 		  $source =~ /^(.+?):(!?\+.+)$/    ||
-		  $source =~ /^(.+?):(!?[&%].+)$/  ||
+		  $source =~ /^(.+?):(!?[&%~].+)$/ ||
 		  $source =~ /^(.+?):(\[.+\]\/(?:\d+))\s*$/
 		) {
 	    $iiface = $1;
@@ -7428,7 +7430,7 @@ sub handle_exclusion( $$$$$$$$$$$$$$$$$$$$$ ) {
 #
 # Returns the destination interface specified in the rule, if any.
 #
-sub expand_rule( $$$$$$$$$$$;$ )
+sub expand_rule( $$$$$$$$$$$$;$ )
 {
     my ($chainref ,    # Chain
 	$restriction,  # Determines what to do with interface names in the SOURCE or DEST
@@ -7441,6 +7443,7 @@ sub expand_rule( $$$$$$$$$$$;$ )
 	$loglevel ,    # Log level (and tag)
 	$disposition,  # Primtive part of the target (RETURN, ACCEPT, ...)
 	$exceptionrule,# Caller's matches used in exclusion case
+	$usergenerated,# Rule came from the IP[6]TABLES target
 	$logname,      # Name of chain to name in log messages
        ) = @_;
 
@@ -7490,7 +7493,7 @@ sub expand_rule( $$$$$$$$$$$;$ )
 	    $loglevel = validate_level( $loglevel );
 	    $logtag   = '' unless defined $logtag;
 	}
-    } elsif ( $disposition eq 'LOG' ) {
+    } elsif ( $disposition eq 'LOG' && ! $usergenerated ) {
 	fatal_error "LOG requires a level";
     }
     #
@@ -7605,9 +7608,9 @@ sub expand_rule( $$$$$$$$$$$;$ )
 
 		    my $cond3 = conditional_rule( $chainref, $dnet );
 
-		    if ( $loglevel eq '' ) {
+		    if ( $loglevel eq '' || $usergenerated ) {
 			#
-			# No logging -- add the target rule with matches to the rule chain
+			# No logging or user-specified logging -- add the target rule with matches to the rule chain
 			#
 			if ( $targetref ) {
 			    add_expanded_jump( $chainref, $targetref , 0, $matches );

Shorewall/Perl/Shorewall/Config.pm

@@ -396,6 +396,7 @@ our %capdesc = ( NAT_ENABLED     => 'NAT',
 		 TARPIT_TARGET   => 'TARPIT Target',
 		 IFACE_MATCH     => 'Iface Match',
                  TCPMSS_TARGET   => 'TCPMSS Target',
+                 WAIT_OPTION     => 'iptables --wait option',
 
 		 AMANDA_HELPER   => 'Amanda Helper',
 		 FTP_HELPER      => 'FTP Helper',
@@ -714,7 +715,7 @@ sub initialize( $;$$) {
 		    EXPORT                  => 0,
 		    KLUDGEFREE              => '',
 		    VERSION                 => "5.0.1",
-		    CAPVERSION              => 40609 ,
+		    CAPVERSION              => 50004 ,
 		    BLACKLIST_LOG_TAG       => '',
 		    RELATED_LOG_TAG         => '',
 		    MACLIST_LOG_TAG         => '',
@@ -989,6 +990,7 @@ sub initialize( $;$$) {
 	       TARPIT_TARGET => undef,
 	       IFACE_MATCH => undef,
 	       TCPMSS_TARGET => undef,
+	       WAIT_OPTION => undef,
 
 	       AMANDA_HELPER => undef,
 	       FTP_HELPER => undef,
@@ -2212,7 +2214,10 @@ sub split_line2( $$;$$$ ) {
 	$pairs = '';
     }
 
-    fatal_error "Shorewall Configuration file entries may not contain double quotes, single back quotes or backslashes" if $columns =~ /["`\\]/;
+    unless ( $currline =~ /^\s*IP6?TABLES\(.*\)/ ) {
+	fatal_error "Shorewall Configuration file entries may not contain double quotes, single back quotes or backslashes" if $columns =~ /["`\\]/;
+    }
+
     fatal_error "Non-ASCII gunk in file" if $columns =~ /[^\s[:print:]]/;
 
     my @line = split_columns( $columns );
@@ -2245,7 +2250,7 @@ sub split_line2( $$;$$$ ) {
 
 	for ( @pairs ) {
 	    fatal_error "Invalid column/value pair ($_)" unless /^(\w+)(?:=>?|:)(.+)$/;
-	    my ( $column, $value ) = ( lc $1, $2 );
+	    my ( $column, $value ) = ( lc( $1 ), $2 );
 	    fatal_error "Unknown column ($1)" unless exists $columnsref->{$column};
 	    $column = $columnsref->{$column};
 	    fatal_error "Non-ASCII gunk in file" if $columns =~ /[^\s[:print:]]/;
@@ -3963,7 +3968,7 @@ sub Udpliteredirect() {
 
 sub Mangle_Enabled() {
     if ( qt1( "$iptables $iptablesw -t mangle -L -n" ) ) {
-	system( "$iptables -t mangle -N $sillyname" ) == 0 || fatal_error "Cannot Create Mangle chain $sillyname";
+	system( "$iptables $iptablesw -t mangle -N $sillyname" ) == 0 || fatal_error "Cannot Create Mangle chain $sillyname";
     }
 }
 
@@ -4605,7 +4610,8 @@ sub determine_capabilities() {
 
     my $pid     = $$;
 
-    $capabilities{CAPVERSION} = $globals{CAPVERSION};
+    $capabilities{CAPVERSION}  = $globals{CAPVERSION};
+    $capabilities{WAIT_OPTION} = $iptablesw;
 
     determine_kernelversion;
 
@@ -5083,6 +5089,8 @@ sub read_capabilities() {
 
     $globals{KLUDGEFREE} = $capabilities{KLUDGEFREE};
 
+    $iptablesw = '-w' if $capabilities{WAIT_OPTION};
+
 }
 
 #
@@ -5147,6 +5155,7 @@ sub unsupported_yes_no_warning( $ ) {
 #
 sub get_params( $ ) {
     my $export = $_[0];
+    my $cygwin = ( $shorewallrc{HOST} eq 'cygwin' );
 
     my $fn = find_file 'params';
 
@@ -5188,14 +5197,16 @@ sub get_params( $ ) {
 	    $shell = BASH;
 
 	    for ( @params ) {
-		if ( /^declare -x (.*?)="(.*[^\\])"$/ ) {
+		chomp;
+		if ( $cygwin && /^declare -x (.*?)="(.*)"$/ ) {
+		    $params{$1} = $2 unless $1 eq '_';
+		} elsif ( /^declare -x (.*?)="(.*[^\\])"$/ ) {
 		    $params{$1} = $2 unless $1 eq '_';
 		} elsif ( /^declare -x (.*?)="(.*)$/ ) {
 		    $params{$variable=$1} = $2 eq '"' ? '' : "${2}\n";
 		} elsif ( /^declare -x (.*)\s+$/ || /^declare -x (.*)=""$/ ) {
 		    $params{$1} = '';
 		} else {
-		    chomp;
 		    if ($variable) {
 			s/"$//;
 			$params{$variable} .= $_;
@@ -5216,14 +5227,16 @@ sub get_params( $ ) {
 	    $shell = OLDBASH;
 
 	    for ( @params ) {
-		if ( /^export (.*?)="(.*[^\\])"$/ ) {
+		chomp;
+		if ( $cygwin && /^export (.*?)="(.*)"$/ ) {
+		    $params{$1} = $2 unless $1 eq '_';
+		} elsif ( /^export (.*?)="(.*[^\\])"$/ ) {
 		    $params{$1} = $2 unless $1 eq '_';
 		} elsif ( /^export (.*?)="(.*)$/ ) {
 		    $params{$variable=$1} = $2 eq '"' ? '' : "${2}\n";
 		} elsif ( /^export ([^\s=]+)\s*$/ || /^export (.*)=""$/ ) {
 		    $params{$1} = '';
 		} else {
-		    chomp;
 		    if ($variable) {
 			s/"$//;
 			$params{$variable} .= $_;
@@ -5243,6 +5256,7 @@ sub get_params( $ ) {
 	    $shell = ASH;
 
 	    for ( @params ) {
+		chomp;
 		if ( /^export (.*?)='(.*'"'"')$/ ) {
 		    $params{$variable=$1}="${2}\n";
 		} elsif ( /^export (.*?)='(.*)'$/ ) {
@@ -5250,7 +5264,6 @@ sub get_params( $ ) {
 		} elsif ( /^export (.*?)='(.*)$/ ) {
 		    $params{$variable=$1}="${2}\n";
 		} else {
-		    chomp;
 		    if ($variable) {
 			s/'$//;
 			$params{$variable} .= $_;
@@ -5262,9 +5275,23 @@ sub get_params( $ ) {
 	}
 
 	for ( keys %params ) {
-	    unless ( $_ eq 'SHOREWALL_INIT_SCRIPT' ) {
-		fatal_error "The variable name $_ is reserved and may not be set in the params file"
-		    if /^SW_/ || /^SHOREWALL_/ || ( exists $config{$_} && ! exists $ENV{$_} ) || exists $reserved{$_};
+	    if ( /[^\w]/ ) {
+		#
+		# Useless variable with special characters in its name
+		#
+		delete $params{$_};
+	    } elsif ( /^(?:SHLVL|OLDPWD)$/ ) {
+		#
+		# The shell running getparams generates those
+		#
+		delete $params{$_};
+	    } else {
+		unless ( $_ eq 'SHOREWALL_INIT_SCRIPT' ) {
+		    fatal_error "The variable name $_ is reserved and may not be set in the params file"
+			if /^SW_/ || /^SHOREWALL_/ || ( exists $config{$_} && ! exists $ENV{$_} ) || exists $reserved{$_};
+		}
+
+		$params{$_} = '' unless defined $params{$_};
 	    }
 	}
 
@@ -5314,6 +5341,8 @@ sub export_params() {
 	next if exists $compiler_params{$param};
 
 	my $value = $params{$param};
+
+	chomp $value;
 	#
 	# Values in %params are generated from the output of 'export -p'.
 	# The different shells have different conventions for delimiting
@@ -5324,19 +5353,27 @@ sub export_params() {
 	    $value =~ s/\\"/"/g;
 	} elsif ( $shell == OLDBASH ) {
 	    $value =~ s/\\'/'/g;
+	    $value =~ s/\\"/"/g;
+	    $value =~ s/\\\\/\\/g;
 	} else {
 	    $value =~ s/'"'"'/'/g;
 	}
 	#
 	# Don't export pairs from %ENV
 	#
-	next if defined $ENV{$param} && $value eq $ENV{$param};
+	if ( defined $ENV{$param} ) {
+	    next if $value eq $ENV{$param};
+	} elsif ( exists $ENV{$param} ) {
+	    next unless supplied $value;
+	}
 
 	emit "#\n# From the params file\n#" unless $count++;
 	#
 	# We will use double quotes and escape embedded quotes with \.
 	#
-	if ( $value =~ /[\s()['"]/ ) {
+	if ( $value =~ /^"[^"]*"$/ ) {
+	    emit "$param=$value";
+	} elsif ( $value =~ /[\s()['"]/ ) {
 	    $value =~ s/"/\\"/g;
 	    emit "$param='$value'";
 	} else {

Shorewall/Perl/Shorewall/Misc.pm

@@ -614,7 +614,8 @@ sub process_stoppedrules() {
 				 $target,
 				 '',
 				 $disposition,
-				 do_proto( $proto, '-', '-' ) );
+				 do_proto( $proto, '-', '-' ),
+				 '');
 		}
 	    } else {
 		warning_message "Redundant OUTPUT rule ignored because ADMINISABSENTMINDED=Yes";

Shorewall/Perl/Shorewall/Nat.pm

@@ -345,7 +345,8 @@ sub process_one_masq1( $$$$$$$$$$$ )
 		     $target ,
 		     '' ,
 		     '' ,
-		     $exceptionrule )
+		     $exceptionrule ,
+		     '' )
 	    unless unreachable_warning( 0, $chainref );
 
 	conditional_rule_end( $chainref ) if $detectaddress || $conditional;
@@ -795,7 +796,8 @@ sub handle_nat_rule( $$$$$$$$$$$$$ ) {
 		  $target ,
 		  $loglevel ,
 		  $log_action ,
-		  $serverport ? do_proto( $proto, '', '' ) : '',
+		  $serverport ? do_proto( $proto, '', '' ) : '' ,
+		  '' ,
 		)
 	unless unreachable_warning( $wildcard, $chainref );
 
@@ -867,6 +869,7 @@ sub handle_nonat_rule( $$$$$$$$$$$ ) {
 			 $loglevel,
 			 $log_action,
 			 '',
+			 '',
 			 dnat_chain( $sourcezone  ) )
 		unless unreachable_warning( $wildcard, $chn );
 
@@ -888,6 +891,7 @@ sub handle_nonat_rule( $$$$$$$$$$$ ) {
 		 $loglevel ,
 		 $log_action ,
 		 '',
+		 '',
 	       )
 	unless unreachable_warning( $wildcard, $nonat_chain );
 }

Shorewall/Perl/Shorewall/Providers.pm

@@ -661,6 +661,10 @@ sub process_a_provider( $ ) {
 	fatal_error 'A non-empty COPY column requires that a routing table be specified in the DUPLICATE column' unless $copy eq 'none';
     }
 
+    if ( $persistent ) {
+	warning_message( "Provider $table is not optional -- the 'persistent' option is ignored" ), $persistent = 0 unless $optional;
+    }
+
     $providers{$table} = { provider          => $table,
 			   number            => $number ,
 			   id                => $config{USE_RT_NAMES} ? $table : $number,
@@ -702,7 +706,7 @@ sub process_a_provider( $ ) {
     if ( $track ) {
 	if ( $routemarked_interfaces{$interface} ) {
 	    fatal_error "Interface $interface is tracked through an earlier provider" if $routemarked_interfaces{$interface} == ROUTEMARKED_UNSHARED;
-	    fatal_error "Multiple providers through the same interface must their IP address specified in the INTERFACES" unless $shared;
+	    fatal_error "Multiple providers through the same interface must have their IP address specified in the INTERFACES column" unless $shared;
 	} else {
 	    $routemarked_interfaces{$interface} = $shared ? ROUTEMARKED_SHARED : ROUTEMARKED_UNSHARED;
 	    push @routemarked_interfaces, $interface;
@@ -1346,7 +1350,7 @@ sub add_a_route( ) {
 
     my $persistent;
 
-    if ( $options != '-' ) {
+    if ( $options ne '-' ) {
 	for ( split_list1( 'option', $options ) ) {
 	    my ( $option, $value ) = split /=/, $options;
 
@@ -1764,6 +1768,7 @@ sub map_provider_to_interface() {
 
 sub setup_providers() {
     our $providers;
+    our $pseudoproviders;
 
     if ( $providers ) {
 	if ( $maxload ) {
@@ -1798,6 +1803,11 @@ sub setup_providers() {
 
 	push_indent;
 
+	if ( $pseudoproviders ) {
+	    emit '';
+	    emit "start_$providers{$_}->{what}_$_" for @providers;
+	}
+
 	emit "\nundo_routing";
 	emit "restore_default_route $config{USE_DEFAULT_RT}";
 

Shorewall/Perl/Shorewall/Raw.pm

@@ -98,6 +98,8 @@ sub process_conntrack_rule( $$$$$$$$$$ ) {
 	$action = join( ":" , 'LOG', $action );
     }
 
+    my $usergenerated;
+
     if ( $action eq 'NOTRACK' ) {
 	#
 	# A patch that deimplements the NOTRACK target has been posted on the
@@ -204,7 +206,8 @@ sub process_conntrack_rule( $$$$$$$$$$ ) {
 		 $action ,
 		 $level || '' ,
 		 $disposition ,
-		 $exception_rule );
+		 $exception_rule ,
+		 $usergenerated && ! $level );
 
     progress_message "  Conntrack rule \"$currentline\" $done";
 }
@@ -247,6 +250,7 @@ sub handle_helper_rule( $$$$$$$$$$$ ) {
 			 $action_target ,
 			 '',
 			 'CT' ,
+			 '' ,
 			 '' );
 	} else {
 	    expand_rule( ensure_raw_chain( notrack_chain( $sourceref->{name} ) ) ,
@@ -261,6 +265,7 @@ sub handle_helper_rule( $$$$$$$$$$$ ) {
 			 $action_target ,
 			 '' ,
 			 'CT' ,
+			 '' ,
 			 '' );
 	}
     }

Shorewall/Perl/Shorewall/Rules.pm

@@ -2264,6 +2264,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
     my $matches     = $rule;
     my $raw_matches = '';
     my $exceptionrule = '';
+    my $usergenerated;
 
     if ( $inchain = defined $chainref ) {
 	( $inaction, undef, undef, undef ) = split /:/, $normalized_action = $chainref->{action}, 4 if $chainref->{action};
@@ -2287,6 +2288,8 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 
     fatal_error "Unknown ACTION ($action)" unless $actiontype;
 
+    $usergenerated = $actiontype & IPTABLES;
+
     if ( $actiontype == MACRO ) {
 	#
 	# process_macro() will call process_rule() recursively for each rule in the macro body
@@ -2333,15 +2336,16 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	$param = $param eq '' ? 'drop' : $param;
 	fatal_error "Invalid AUDIT type ($param) -- must be 'accept', 'drop' or 'reject'" unless $param =~ /^(?:accept|drop|reject)$/;
 	$actiontype = STANDARD;
-    } elsif ( $actiontype & NFLOG ) {
-	validate_level( $action );
-	$loglevel = supplied $loglevel ? join( ':', $action, $loglevel ) : $action;
-	$action   = 'LOG';
-    } elsif ( ! ( $actiontype & (ACTION | INLINE | IPTABLES | TARPIT ) ) ) {
-	fatal_error "'builtin' actions may only be used in INLINE rules" if $actiontype == USERBUILTIN;
-	fatal_error "The $basictarget TARGET does not accept a parameter" unless $param eq '';
+    } elsif ( ! $usergenerated ) {
+	if ( $actiontype & NFLOG ) {
+	    validate_level( $action );
+	    $loglevel = supplied $loglevel ? join( ':', $action, $loglevel ) : $action;
+	    $action   = 'LOG';
+	} elsif ( ! ( $actiontype & (ACTION | INLINE | IPTABLES | TARPIT ) ) ) {
+	    fatal_error "'builtin' actions may only be used in INLINE rules" if $actiontype == USERBUILTIN;
+	    fatal_error "The $basictarget TARGET does not accept a parameter" unless $param eq '';
+	}
     }
-
     #
     # We can now dispense with the postfix character
     #
@@ -2477,13 +2481,21 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	    $actiontype |= HELPER;
 	} elsif ( $actiontype & SET ) {
 	    my %xlate = ( ADD => 'add-set' , DEL => 'del-set' );
+	    my ( $setname, $flags, $timeout, $rest ) = split ':', $param, 4;
 
-	    my ( $setname, $flags, $rest ) = split ':', $param, 3;
 	    fatal_error "Invalid ADD/DEL parameter ($param)" if $rest;
 	    $setname =~ s/^\+//;
 	    fatal_error "Expected ipset name ($setname)" unless $setname =~ /^(6_)?[a-zA-Z][-\w]*$/;
-	    fatal_error "Invalid flags ($flags)" unless defined $flags && $flags =~ /^(dst|src)(,(dst|src)){0,5}$/;
+	    fatal_error "Invalid flags ($flags)"         unless defined $flags && $flags =~ /^(dst|src)(,(dst|src)){0,5}$/;
+
 	    $action = join( ' ', 'SET --' . $xlate{$basictarget} , $setname , $flags );
+
+	    if ( supplied $timeout ) {
+		fatal_error "A timeout may only be supplied in an ADD rule" unless $basictarget eq 'ADD';
+		fatal_error "Invalid Timeout ($timeout)"                    unless $timeout && $timeout =~ /^\d+$/;
+
+		$action .= " --timeout $timeout";
+	    }
 	}
     }
     #
@@ -2901,7 +2913,8 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 		     $action ,
 		     $loglevel ,
 		     $log_action ,
-		     $exceptionrule )
+		     $exceptionrule ,
+		     $usergenerated && ! $loglevel )
 	    unless unreachable_warning( $wildcard || $section == DEFAULTACTION_SECTION, $chainref );
     }
 

Shorewall/Perl/Shorewall/Tc.pm

@@ -227,6 +227,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
     our $designator;
     our $ttl            = 0;
     my $fw              = firewall_zone;
+    my $usergenerated;
 
     sub handle_mark_param( $$ ) {
 	my ( $option, $marktype ) = @_;
@@ -290,7 +291,8 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 			     "$target $option " . join( '/', in_hex( $markval ) , $mask ) ,
 			     '',
 			     $target ,
-			     $exceptionrule );
+			     $exceptionrule ,
+			     ''  );
 	    }
 
 	    $done = 1;
@@ -452,6 +454,16 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 	    },
 	},
 
+	DROP       => {
+	    defaultchain   => 0,
+	    allowedchains  => PREROUTING | FORWARD | OUTPUT | POSTROUTING,
+	    minparams      => 0,
+	    maxparams      => 0,
+	    function       => sub() {
+		$target = 'DROP';
+	    }
+	},
+
 	DSCP       => {
 	    defaultchain   => 0,
 	    allowedchains  => PREROUTING | FORWARD | OUTPUT | POSTROUTING,
@@ -524,7 +536,8 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 		my $target_type = $builtin_target{$tgt};
 		fatal_error "Unknown target ($tgt)" unless $target_type;
 		fatal_error "The $tgt TARGET is not allowed in the mangle table" unless $target_type & MANGLE_TABLE;
-		$target = $params;
+		$target        = $params;
+		$usergenerated = 1;
 	    },
 	},
 
@@ -539,7 +552,8 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 		my $target_type = $builtin_target{$tgt};
 		fatal_error "Unknown target ($tgt)" unless $target_type;
 		fatal_error "The $tgt TARGET is not allowed in the mangle table" unless $target_type & MANGLE_TABLE;
-		$target = $params;
+		$target        = $params;
+		$usergenerated = 1;
 	    },
 	},
 
@@ -850,7 +864,8 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 					 $target,
 					 '' ,
 					 $target ,
-					 $exceptionrule ) )
+					 $exceptionrule ,
+					 $usergenerated ) )
 	     && $device ) {
 	    #
 	    # expand_rule() returns destination device if any
@@ -3118,6 +3133,7 @@ sub process_secmark_rule1( $$$$$$$$$ ) {
 		 $target ,
 		 '' ,
 		 $disposition,
+		 '' ,
 		 '' );
 
     progress_message "Secmarks rule \"$currentline\" $done";

Shorewall/configfiles/accounting

@@ -1,11 +1,10 @@
 #
-# Shorewall - Accounting File
+# Shorewall -- /etc/shorewall/accounting
 #
 # For information about entries in this file, type "man shorewall-accounting"
 #
 # Please see http://shorewall.net/Accounting.html for examples and
 # additional information about how to use this file.
 #
-#################################################################################################################
-#ACTION	CHAIN	SOURCE		DESTINATION	PROTO	DEST		SOURCE	USER/	MARK	IPSEC
-#							PORT(S)		PORT(S)	GROUP
+#####################################################################################################
+#ACTION		CHAIN	SOURCE		DEST		PROTO	DPORT	SPORT	USER	MARK	IPSEC

Shorewall/configfiles/actions

@@ -1,12 +1,12 @@
 #
-# Shorewall - Actions File
-#
-# /etc/shorewall/actions
+# Shorewall -- /etc/shorewall/actions
 #
 # For information about entries in this file, type "man shorewall-actions"
 #
 # Please see http://shorewall.net/Actions.html for additional information.
 #
-########################################################################################
-#ACTION    OPTIONS		COMMENT (place '# ' below the 'C' in comment followed by
-#                        	v        a comment describing the action)
+# Place '# ' below the 'C' in COMMENT followed by a comment describing
+# the action.
+#
+###############################################################################
+#ACTION		OPTIONS		COMMENT

Shorewall/configfiles/arprules

@@ -1,8 +1,7 @@
 #
-# Shorewall - arprules File
+# Shorewall -- /etc/shorewall/arprules
 #
 # For information about entries in this file, type "man shorewall-arprules"
 #
-##############################################################################################################
-#ACTION				SOURCE				DEST				ARP
-#												OPCODE
+###############################################################################
+#ACTION		SOURCE			DEST			OPCODE

Shorewall/configfiles/blrules

@@ -1,12 +1,10 @@
 #
-# Shorewall - Blacklist Rules File
+# Shorewall -- /etc/shorewall/blrules
 #
 # For information about entries in this file, type "man shorewall-blrules"
 #
 # Please see http://shorewall.net/blacklisting_support.htm for additional
 # information.
 #
-################################################################################################################################################################################################
-#ACTION		SOURCE			DEST			PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK	CONNLIMIT	TIME	HEADERS		SWITCH
-#									PORT	PORT(S)		DEST		LIMIT		GROUP
-
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER

Shorewall/configfiles/clear

@@ -1,7 +1,5 @@
 #
-# Shorewall - clear File
-#
-# /etc/shorewall/clear
+# Shorewall -- /etc/shorewall/clear
 #
 # Add commands below that you want to be executed after Shorewall has
 # processed the 'clear' command.

Shorewall/configfiles/conntrack

@@ -1,12 +1,12 @@
 #
-# Shorewall - conntrack File
+# Shorewall -- /etc/shorewall/conntrack
 #
 # For information about entries in this file, type "man shorewall-conntrack"
 #
-##############################################################################################################
 ?FORMAT 3
-#ACTION			SOURCE		DESTINATION	PROTO	DEST		SOURCE	USER/		SWITCH
-#								PORT(S)		PORT(S)	GROUP
+######################################################################################################
+#ACTION			SOURCE		DEST		PROTO	DPORT		SPORT	USER	SWITCH
+
 ?if $AUTOHELPERS && __CT_TARGET
 
 ?if __AMANDA_HELPER

Shorewall/configfiles/ecn

@@ -1,5 +1,5 @@
 #
-# Shorewall - Ecn File
+# Shorewall -- /etc/shorewall/ecn
 #
 # For information about entries in this file, type "man shorewall-ecn"
 #
@@ -7,4 +7,4 @@
 # http://www.shorewall.net/manpages/shorewall-ecn.html
 #
 ###############################################################################
-#INTERFACE	HOST(S)
+#INTERFACE	HOSTS

Shorewall/configfiles/findgw

@@ -1,7 +1,5 @@
 #
-# Shorewall - Findgw File
-#
-# /etc/shorewall/findgw
+# Shorewall -- /etc/shorewall/findgw
 #
 # The code in this file is executed when Shorewall is trying to detect the
 # gateway through an interface in /etc/shorewall/providers that has GATEWAY

Shorewall/configfiles/hosts

@@ -1,5 +1,5 @@
 #
-# Shorewall - Hosts file
+# Shorewall -- /etc/shorewall/hosts
 #
 # For information about entries in this file, type "man shorewall-hosts"
 #
@@ -7,4 +7,4 @@
 # http://www.shorewall.net/manpages/shorewall-hosts.html
 #
 ###############################################################################
-#ZONE	HOST(S)					OPTIONS
+#ZONE		HOSTS				OPTIONS

Shorewall/configfiles/init

@@ -1,10 +1,8 @@
 #
-# Shorewall - Init File
+# Shorewall -- /etc/shorewall/init
 #
-# /etc/shorewall/init
-#
-#	Add commands below that you want to be executed at the beginning of
-#	a "shorewall start", "shorewall-reload" or "shorewall restart" command.
+# Add commands below that you want to be executed at the beginning of
+# a "shorewall start", "shorewall-reload" or "shorewall restart" command.
 #
 # For additional information, see
 # http://shorewall.net/shorewall_extension_scripts.htm

Shorewall/configfiles/initdone

@@ -1,12 +1,10 @@
 #
-# Shorewall - Initdone File
+# Shorewall -- /etc/shorewall/initdone
 #
-# /etc/shorewall/initdone
-#
-#	Add commands below that you want to be executed during
-#	"shorewall start", "shorewall reload" or "shorewall restart" commands
-#	at the point where Shorewall has not yet added any permanent rules to
-#       the builtin chains.
+# Add commands below that you want to be executed during
+# "shorewall start", "shorewall reload" or "shorewall restart" commands
+# at the point where Shorewall has not yet added any permanent rules to
+# the builtin chains.
 #
 # For additional information, see
 # http://shorewall.net/shorewall_extension_scripts.htm

Shorewall/configfiles/interfaces

@@ -1,12 +1,11 @@
 #
-# Shorewall - Interfaces File
+# Shorewall -- /etc/shorewall/interfaces
 #
 # For information about entries in this file, type "man shorewall-interfaces"
 #
 # The manpage is also online at
 # http://www.shorewall.net/manpages/shorewall-interfaces.html
 #
-###############################################################################
 ?FORMAT 2
 ###############################################################################
 #ZONE		INTERFACE		OPTIONS

Shorewall/configfiles/isusable

@@ -1,20 +1,19 @@
 #
-# Shorewall - isusable File
+# Shorewall -- /etc/shorewall/isusable
 #
-# /etc/shorewall/isusable
+# This script is called when Shorewall is attempting to determine
+# if an interface named in /etc/shorewall/providers is usable.
 #
-#	This script is called when Shorewall is attempting to determine
-#	if an interface named in /etc/shorewall/providers is usable.
-#
-#	The script is invoked inside a function that accepts an interface
-#	name as a single argument. The file below is designed to work with
-#	both swping and lsm as described at
-#	http://www.shorewall.net/MultiISP.html
+# The script is invoked inside a function that accepts an interface
+# name as a single argument. The file below is designed to work with
+# both swping and lsm as described at
+# http://www.shorewall.net/MultiISP.html
 #
 # See http://shorewall.net/shorewall_extension_scripts.htm for additional
 # information.
 #
 ###############################################################################
+
 local status
 status=0
 

Shorewall/configfiles/lib.private

@@ -1,7 +1,5 @@
 #
-# Shorewall - lib.private File
-#
-# /etc/shorewall/lib.private
+# Shorewall -- /etc/shorewall/lib.private
 #
 # Use this file to declare shell functions to be called in the other
 # run-time extension scripts. The file will be copied into the generated

Shorewall/configfiles/maclist

@@ -1,9 +1,9 @@
 #
-# Shorewall - Maclist file
+# Shorewall -- /etc/shorewall/maclist
 #
 # For information about entries in this file, type "man shorewall-maclist"
 #
 # For additional information, see http://shorewall.net/MAC_Validation.html
 #
 ###############################################################################
-#DISPOSITION	INTERFACE		MAC			IP ADDRESSES (Optional)
+#DISPOSITION	INTERFACE		MAC			ADDRESSES

Shorewall/configfiles/mangle

@@ -1,5 +1,5 @@
 #
-# Shorewall - Mangle File
+# Shorewall -- /etc/shorewall/mangle
 #
 # For information about entries in this file, type "man shorewall-mangle"
 #
@@ -9,6 +9,6 @@
 #
 # See http://shorewall.net/PacketMarking.html for a detailed description of
 # the Netfilter/Shorewall packet marking mechanism.
+#
 ####################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DEST	SOURCE	USER	TEST	LENGTH	TOS	CONNBYTES	HELPER	PROBABILITY	DSCP
-#							PORT(S)	PORT(S)
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	USER	TEST	LENGTH	TOS	CONNBYTES	HELPER	PROBABILITY	DSCP

Shorewall/configfiles/masq

@@ -1,5 +1,5 @@
 #
-# Shorewall - Masq file
+# Shorewall -- /etc/shorewall/masq
 #
 # For information about entries in this file, type "man shorewall-masq"
 #
@@ -7,5 +7,4 @@
 # http://www.shorewall.net/manpages/shorewall-masq.html
 #
 ###################################################################################################################################
-#INTERFACE:DEST		SOURCE		ADDRESS		PROTO	PORT(S)	IPSEC	MARK	USER/	SWITCH	ORIGINAL	PROBABILITY
-#											GROUP		DEST
+#INTERFACE		SOURCE		ADDRESS		PROTO	PORT	IPSEC	MARK	USER	SWITCH	ORIGDEST	PROBABILITY

Shorewall/configfiles/nat

@@ -1,10 +1,9 @@
 #
-# Shorewall - Nat File
+# Shorewall -- /etc/shorewall/nat
 #
 # For information about entries in this file, type "man shorewall-nat"
 #
 # For additional information, see http://shorewall.net/NAT.htm
 #
 ###############################################################################
-#EXTERNAL	INTERFACE	INTERNAL	ALL		LOCAL
-#						INTERFACES
+#EXTERNAL	INTERFACE	INTERNAL	ALLINTS		LOCAL

Shorewall/configfiles/netmap

@@ -1,11 +1,10 @@
 #
-# Shorewall	 - Netmap File
+# Shorewall -- /etc/shorewall/netmap
 #
 # For information about entries in this file, type "man shorewall-netmap"
 #
 # See http://shorewall.net/netmap.html for an example and usage
 # information.
 #
-##############################################################################################
-#TYPE	NET1		INTERFACE	NET2		NET3		PROTO	DEST	SOURCE
-#										PORT(S)	PORT(S)
+#############################################################################################
+#TYPE	NET1		INTERFACE	NET2		NET3		PROTO	DPORT	SPORT

Shorewall/configfiles/params

@@ -1,28 +1,24 @@
 #
-# Shorewall - Params File
+# Shorewall -- /etc/shorewall/params
 #
-# /etc/shorewall/params
+# Assign any variables that you need here.
 #
-#	Assign any variables that you need here.
+# It is suggested that variable names begin with an upper case letter
+# to distinguish them from variables used internally within the
+# Shorewall programs
 #
-#	It is suggested that variable names begin with an upper case letter
-#	to distinguish them from variables used internally within the
-#	Shorewall programs
+# Example:
 #
-#	Example:
+#	NET_IF=eth0
+#	NET_BCAST=130.252.100.255
+#	NET_OPTIONS=routefilter,norfc1918
 #
-#		NET_IF=eth0
-#		NET_BCAST=130.252.100.255
-#		NET_OPTIONS=routefilter,norfc1918
+# Example (/etc/shorewall/interfaces record):
 #
-#	Example (/etc/shorewall/interfaces record):
+#	net	$NET_IF		$NET_BCAST	$NET_OPTIONS
 #
-#		net	$NET_IF		$NET_BCAST	$NET_OPTIONS
+# The result will be the same as if the record had been written
 #
-#	The result will be the same as if the record had been written
-#
-#		net	eth0		130.252.100.255	routefilter,norfc1918
+#	net	eth0		130.252.100.255	routefilter,norfc1918
 #
 ###############################################################################
-
-#LAST LINE -- DO NOT REMOVE

Shorewall/configfiles/policy

@@ -1,5 +1,5 @@
 #
-# Shorewall - Policy File
+# Shorewall -- /etc/shorewall/policy
 #
 # For information about entries in this file, type "man shorewall-policy"
 #
@@ -7,5 +7,4 @@
 # http://www.shorewall.net/manpages/shorewall-policy.html
 #
 ###############################################################################
-#SOURCE	DEST	POLICY		LOG	LIMIT:		CONNLIMIT:
-#				LEVEL	BURST		MASK
+#SOURCE		DEST		POLICY	LOGLEVEL	LIMIT	CONNLIMIT

Shorewall/configfiles/providers

@@ -1,5 +1,5 @@
 #
-# Shorewall - Providers File
+# Shorewall -- /etc/shorewall/providers
 #
 # For information about entries in this file, type "man shorewall-providers"
 #

Shorewall/configfiles/proxyarp

@@ -1,5 +1,5 @@
 #
-# Shorewall - Proxyarp File
+# Shorewall -- /etc/shorewall/proxyarp
 #
 # For information about entries in this file, type "man shorewall-proxyarp"
 #

Shorewall/configfiles/refresh

@@ -1,7 +1,5 @@
 #
-# Shorewall - refresh File
-#
-# /etc/shorewall/refresh
+# Shorewall -- /etc/shorewall/refresh
 #
 # Add commands below that you want to be executed before Shorewall
 # has processed the 'refresh' command.

Shorewall/configfiles/refreshed

@@ -1,7 +1,5 @@
 #
-# Shorewall - refreshed File
-#
-# /etc/shorewall/refreshed
+# Shorewall -- /etc/shorewall/refreshed
 #
 # Add commands below that you want to be executed after Shorewall has
 # processed the 'refresh' command.

Shorewall/configfiles/restored

@@ -1,10 +1,8 @@
 #
-# Shorewall - Restored File
+# Shorewall -- /etc/shorewall/restored
 #
-# /etc/shorewall/restored
-#
-#	Add commands below that you want to be executed after shorewall has
-#	completed a 'restore' command.
+# Add commands below that you want to be executed after shorewall has
+# completed a 'restore' command.
 #
 # See http://shorewall.net/shorewall_extension_scripts.htm for additional
 # information.

Shorewall/configfiles/routes

@@ -1,9 +1,9 @@
 #
-# Shorewall - routes File
+# Shorewall -- /etc/shorewall/routes
 #
 # For information about entries in this file, type "man shorewall-routes"
 #
 # For additional information, see http://www.shorewall.net/MultiISP.html
+#
 ###############################################################################
 #PROVIDER		DEST			GATEWAY		DEVICE	OPTIONS
-

Shorewall/configfiles/routestopped

@@ -1,16 +0,0 @@
-#
-# Shorewall - Routestopped File
-#
-# This file is deprecated in favor of the stoppedrules file
-#
-# For information about entries in this file, type "man shorewall-routestopped"
-#
-# The manpage is also online at
-# http://www.shorewall.net/manpages/shorewall-routestopped.html
-#
-# See http://shorewall.net/starting_and_stopping_shorewall.htm for additional
-# information.
-#
-###############################################################################
-#INTERFACE	HOST(S)			OPTIONS		PROTO	DEST	SOURCE
-#								PORT(S)	PORT(S)

Shorewall/configfiles/rtrules

@@ -1,8 +1,9 @@
 #
-# Shorewall - route rules File
+# Shorewall -- /etc/shorewall/rtrules
 #
 # For information about entries in this file, type "man shorewall-rtrules"
 #
 # For additional information, see http://www.shorewall.net/MultiISP.html
+#
 ####################################################################################
 #SOURCE			DEST			PROVIDER	PRIORITY	MASK

Shorewall/configfiles/rules

@@ -1,14 +1,14 @@
 #
-# Shorewall - Rules File
+# Shorewall -- /etc/shorewall/rules
 #
 # For information on the settings in this file, type "man shorewall-rules"
 #
 # The manpage is also online at
 # http://www.shorewall.net/manpages/shorewall-rules.html
 #
-######################################################################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK	CONNLIMIT	TIME		HEADERS		SWITCH		HELPER
-#							PORT(S)	PORT(S)		DEST		LIMIT		GROUP
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+
 ?SECTION ALL
 ?SECTION ESTABLISHED
 ?SECTION RELATED

Shorewall/configfiles/scfilter

@@ -1,7 +1,5 @@
 #
-# Shorewall - Show Connections Filter
-#
-# /etc/shorewall/scfilter
+# Shorewall -- /etc/shorewall/scfilter
 #
 # Replace the 'cat' command below to filter the output of
 # 'show connections'.
@@ -10,4 +8,5 @@
 # information.
 #
 ###############################################################################
+
 cat -

Shorewall/configfiles/secmarks

@@ -1,13 +1,7 @@
 #
-# Shorewall - Secmarks File
+# Shorewall -- /etc/shorewall/secmarks
 #
 # For information about entries in this file, type "man shorewall-secmarks"
 #
-############################################################################################################
-#SECMARK			CHAIN:	SOURCE		DEST		PROTO	DEST	SOURCE	USER/	MARK
-#				STATE						PORT(S)	PORT(S) GROUP
-
-
-
-
-
+############################################################################################
+#SECMARK	CHAIN	SOURCE		DEST		PROTO	DPORT	SPORT	USER	MARK

Shorewall/configfiles/start

@@ -1,13 +1,12 @@
 #
-# Shorewall - Start File
+# Shorewall -- /etc/shorewall/start
 #
-# /etc/shorewall/start
-#
-#	Add commands below that you want to be executed after shorewall has
-#	been started, reloaded or restarted.
+# Add commands below that you want to be executed after shorewall has
+# been started, reloaded or restarted.
 #
 # See http://shorewall.net/shorewall_extension_scripts.htm for additional
 # information.
 #
 ###############################################################################
+
 return 0

Shorewall/configfiles/started

@@ -1,17 +1,15 @@
 #
-# Shorewall - Started File
+# Shorewall -- /etc/shorewall/started
 #
-# /etc/shorewall/started
+# Add commands below that you want to be executed after shorewall has
+# been completely started, reloaded or restarted. The difference between
+# this extension script and /etc/shorewall/start is that this one is
+# invoked after the 'shorewall' chain has been created (thus
+# signaling that the firewall is completely up).
 #
-#	Add commands below that you want to be executed after shorewall has
-#	been completely started, reloaded or restarted. The difference between
-#       this extension script and /etc/shorewall/start is that this one is
-#	invoked	after the 'shorewall' chain has been created (thus
-#	signaling that the firewall is completely up).
-#
-#	This script should not change the firewall configuration directly but
-#	may do so indirectly by running /sbin/shorewall with the 'nolock'
-#	option.
+# This script should not change the firewall configuration directly but
+# may do so indirectly by running /sbin/shorewall with the 'nolock'
+# option.
 #
 # See http://shorewall.net/shorewall_extension_scripts.htm for additional
 # information.

Shorewall/configfiles/stop

@@ -1,10 +1,8 @@
 #
-# Shorewall - Stop File
+# Shorewall -- /etc/shorewall/stop
 #
-# /etc/shorewall/stop
-#
-#	Add commands below that you want to be executed at the beginning of a
-#	"shorewall stop" command.
+# Add commands below that you want to be executed at the beginning of a
+# "shorewall stop" command.
 #
 # See http://shorewall.net/shorewall_extension_scripts.htm for additional
 # information.

Shorewall/configfiles/stopped

@@ -1,10 +1,8 @@
 #
-# Shorewall - Stopped File
+# Shorewall -- /etc/shorewall/stopped
 #
-# /etc/shorewall/stopped
-#
-#	Add commands below that you want to be executed at the completion of a
-#	"shorewall stop" command.
+# Add commands below that you want to be executed at the completion of a
+# "shorewall stop" command.
 #
 # See http://shorewall.net/shorewall_extension_scripts.htm for additional
 # information.

Shorewall/configfiles/stoppedrules

@@ -1,5 +1,5 @@
 #
-# Shorewall - Stopped Rules File
+# Shorewall -- /etc/shorewall/stoppedrules
 #
 # For information about entries in this file, type "man shorewall-stoppedrules"
 #
@@ -10,5 +10,4 @@
 # information.
 #
 ###############################################################################
-#ACTION		SOURCE			DEST		PROTO	DEST	SOURCE
-#								PORT(S)	PORT(S)
+#ACTION		SOURCE			DEST		PROTO	DPORT	SPORT

Shorewall/configfiles/tcclasses

@@ -1,10 +1,9 @@
 #
-# Shorewall - Tcclasses File
+# Shorewall -- /etc/shorewall/tcclasses
 #
 # For information about entries in this file, type "man shorewall-tcclasses"
 #
 # See http://shorewall.net/traffic_shaping.htm for additional information.
 #
 ###############################################################################
-#INTERFACE:CLASS	MARK	RATE:		CEIL	PRIORITY	OPTIONS
-#				DMAX:UMAX
+#INTERFACE	MARK	RATE		CEIL		PRIO	OPTIONS

Shorewall/configfiles/tcclear

@@ -1,7 +1,5 @@
 #
-# Shorewall - tcclear File
-#
-# /etc/shorewall/tcclear
+# Shorewall -- /etc/shorewall/tcclear
 #
 # Add commands below that you want to be executed before Shorewall clears
 # the traffic shaping configuration.

Shorewall/configfiles/tcdevices

@@ -1,10 +1,9 @@
 #
-# Shorewall - Tcdevices File
+# Shorewall -- /etc/shorewall/tcdevices
 #
 # For information about entries in this file, type "man shorewall-tcdevices"
 #
 # See http://shorewall.net/traffic_shaping.htm for additional information.
 #
 ###############################################################################
-#NUMBER:	IN-BANDWITH	OUT-BANDWIDTH	OPTIONS		REDIRECTED
-#INTERFACE							INTERFACES
+#INTERFACE	IN_BANDWITH	OUT_BANDWIDTH	OPTIONS		REDIRECT

Shorewall/configfiles/tcfilters

@@ -1,10 +1,9 @@
 #
-# Shorewall - Tcfilters File
+# Shorewall -- /etc/shorewall/tcfilters
 #
 # For information about entries in this file, type "man shorewall-tcfilters"
 #
 # See http://shorewall.net/traffic_shaping.htm for additional information.
 #
-########################################################################################################
-#INTERFACE:	SOURCE		DEST		PROTO	DEST	SOURCE	TOS		LENGTH	PRIORITY
-#CLASS							PORT(S)	PORT(S)
+######################################################################################
+#CLASS		SOURCE		DEST		PROTO	DPORT	SPORT	TOS	LENGTH

Shorewall/configfiles/tcinterfaces

@@ -1,5 +1,5 @@
 #
-# Shorewall - Tcinterfaces File
+# Shorewall -- /etc/shorewall/tcinterfaces
 #
 # For information about entries in this file, type "man shorewall-tcinterfaces"
 #
@@ -7,4 +7,4 @@
 # information.
 #
 ###############################################################################
-#INTERFACE	TYPE		IN-BANDWIDTH		OUT-BANDWIDTH
+#INTERFACE	TYPE		IN_BANDWIDTH		OUT_BANDWIDTH

Shorewall/configfiles/tcpri

@@ -1,5 +1,5 @@
 #
-# Shorewall - Tcpri File
+# Shorewall -- /etc/shorewall/tcpri
 #
 # For information about entries in this file, type "man shorewall-tcpri"
 #
@@ -7,7 +7,4 @@
 # information.
 #
 ###############################################################################
-#BAND	PROTO	PORT(S)		ADDRESS		IN-INTERFACE	HELPER
-
-
-
+#BAND	PROTO	PORT		ADDRESS		INTERFACE	HELPER

Shorewall/configfiles/tunnels

@@ -1,5 +1,5 @@
 #
-# Shorewall - Tunnels File
+# Shorewall -- /etc/shorewall/tunnels
 #
 # For information about entries in this file, type "man shorewall-tunnels"
 #
@@ -7,5 +7,4 @@
 # http://www.shorewall.net/manpages/shorewall-tunnels.html
 #
 ###############################################################################
-#TYPE			ZONE	GATEWAY(S)			GATEWAY
-#								ZONE(S)
+#TYPE			ZONE		GATEWAY			GATEWAY_ZONE

Shorewall/configfiles/zones

@@ -1,5 +1,5 @@
 #
-# Shorewall - Zones File
+# Shorewall -- /etc/shorewall/zones
 #
 # For information about this file, type "man shorewall-zones"
 #
@@ -7,6 +7,6 @@
 # http://www.shorewall.net/manpages/shorewall-zones.html
 #
 ###############################################################################
-#ZONE	TYPE		OPTIONS		IN			OUT
-#					OPTIONS			OPTIONS
-fw	firewall
+#ZONE		TYPE		OPTIONS		IN_OPTIONS	OUT_OPTIONS
+
+fw		firewall

Shorewall/install.sh

@@ -389,7 +389,7 @@ if [ -z "${DESTDIR}" -a $PRODUCT = shorewall -a ! -f ${SHAREDIR}/$PRODUCT/coreve
 fi
 
 install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0755
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SBINDIR}/${PRODUCT}
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/${PRODUCT}
 echo "$PRODUCT control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
 
 #
@@ -468,16 +468,16 @@ if [ -z "$first_install" ]; then
     #
     # Delete obsolete config files and manpages
     #
-    delete_file ${DESTDIR}/${SHAREDIR}/$PRODUCT/configfiles/tos
-    delete_file ${DESTDIR}/${SHAREDIR}/$PRODUCT/configfiles/tcrules
-    delete_file ${DESTDIR}/${SHAREDIR}/$PRODUCT/configfiles/stoppedrules
-    delete_file ${DESTDIR}/${SHAREDIR}/$PRODUCT/configfiles/notrack
-    delete_file ${DESTDIR}/${SHAREDIR}/$PRODUCT/configfiles/blacklist
-    delete_file ${DESTDIR}/${MANDIR}/man5/$PRODUCT/${PRODUCT}-tos
-    delete_file ${DESTDIR}/${MANDIR}/man5/$PRODUCT/${PRODUCT}-tcrules
-    delete_file ${DESTDIR}/${MANDIR}/man5/$PRODUCT/${PRODUCT}-stoppedrules
-    delete_file ${DESTDIR}/${MANDIR}/man5/$PRODUCT/${PRODUCT}-notrack
-    delete_file ${DESTDIR}/${MANDIR}/man5/$PRODUCT/${PRODUCT}-blacklist
+    delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles/tos
+    delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles/tcrules
+    delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles/stoppedrules
+    delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles/notrack
+    delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles/blacklist
+    delete_file ${DESTDIR}${MANDIR}/man5/$PRODUCT/${PRODUCT}-tos
+    delete_file ${DESTDIR}${MANDIR}/man5/$PRODUCT/${PRODUCT}-tcrules
+    delete_file ${DESTDIR}${MANDIR}/man5/$PRODUCT/${PRODUCT}-stoppedrules
+    delete_file ${DESTDIR}${MANDIR}/man5/$PRODUCT/${PRODUCT}-notrack
+    delete_file ${DESTDIR}${MANDIR}/man5/$PRODUCT/${PRODUCT}-blacklist
 fi
 
 #
@@ -1082,7 +1082,7 @@ if [ $PRODUCT = shorewall6 ]; then
     # Symbolically link 'functions' to lib.base
     #
     ln -sf lib.base ${DESTDIR}${SHAREDIR}/$PRODUCT/functions
-    [ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/${PRODUCT}/lib.base
+    [ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
 fi
 
 if [ -d Perl ]; then

Shorewall/lib.cli-std

@@ -31,6 +31,7 @@
 #
 get_config() {
     local prog
+    local lib
 
     ensure_config_path
 
@@ -70,15 +71,7 @@ get_config() {
 	# This block is avoided for compile for export and when the user isn't root
 	#
 	if [ "$3" = Yes ]; then
-	    if [ -n "$LOGFILE" ]; then
-		if [ -n "$(syslog_circular_buffer)" ]; then
-		    g_logread="logread | tac"
-		elif [ -r $LOGFILE ]; then
-		    g_logread="tac $LOGFILE"
-		else
-		    fatal_error "LOGFILE ($LOGFILE) does not exist!"
-		fi
-	    fi
+	    setup_logread
 	fi
 
 	if [ $g_family -eq 4 ]; then
@@ -322,6 +315,10 @@ get_config() {
     fi
 
     g_loopback=$(find_loopback_interfaces)
+
+    lib=$(find_file lib.cli-user)
+
+    [ -f $lib ] && . $lib
 }
 
 #
@@ -1394,6 +1391,7 @@ remote_reload_command() # $* = original arguments less the command.
     local sharedir
     sharedir=${SHAREDIR}
     local litedir
+    local exitstatus
 
     while [ $finished -eq 0 -a $# -gt 0 ]; do
 	option=$1
@@ -1510,32 +1508,60 @@ remote_reload_command() # $* = original arguments less the command.
 
     g_file="$g_shorewalldir/firewall"
 
-    if compiler $g_debugging compiler "$g_file" && \
-	progress_message3 "Copying $file and ${file}.conf to ${system}:${litedir}..." && \
-	rcp_command "$g_shorewalldir/firewall $g_shorewalldir/firewall.conf" ${litedir}
-    then
-	save=$(find_file save);
+    exitstatus=0
 
-	[ -f $save ] && progress_message3 "Copying $save to ${system}:${confdir}/${g_program}-lite/" && rcp_command $save ${confdir}/shorewall-lite/
+    if compiler $g_debugging compiler "$g_file"; then
+	progress_message3 "Copying $file and ${file}.conf to ${system}:${litedir}..."
+	if rcp_command "$g_shorewalldir/firewall $g_shorewalldir/firewall.conf" ${litedir};  then
+	    save=$(find_file save);
 
-	progress_message3 "Copy complete"
+	    if [ -f $save ]; then
+		progress_message3 "Copying $save to ${system}:${confdir}/${g_program}-lite/"
+		rcp_command $save ${confdir}/shorewall-lite/
+		exitstatus=$?
+	    fi
 
-	if [ $COMMAND = remote-reload ]; then
-	    rsh_command "${sbindir}/${g_program}-lite $g_debugging $verbose $timestamp reload" && \
-	    progress_message3 "System $system reloaded" || saveit=
-	elif [ $COMMAND = remote-restart ]; then
-	    rsh_command "${sbindir}/${g_program}-lite $g_debugging $verbose $timestamp restart" && \
-	    progress_message3 "System $system restarted" || saveit=
+	    if [ $exitstatus -eq 0 ]; then
+
+		progress_message3 "Copy complete"
+
+		if [ $COMMAND = remote-reload ]; then
+		    if rsh_command "${sbindir}/${g_program}-lite $g_debugging $verbose $timestamp reload"; then
+			progress_message3 "System $system reloaded"
+		    else
+			exitstatus=$?
+			savit=
+		    fi
+		elif [ $COMMAND = remote-restart ]; then
+		    if rsh_command "${sbindir}/${g_program}-lite $g_debugging $verbose $timestamp restart"; then
+			progress_message3 "System $system restarted"
+		    else
+			exitstatus=$?
+			saveit=
+		    fi
+		elif rsh_command "${sbindir}/${g_program}-lite $g_debugging $verbose $timestamp start"; then
+		    progress_message3 "System $system started"
+		else
+		    exitstatus=$?
+		    saveit=
+		fi
+
+		if [ -n "$saveit" ]; then
+		    if rsh_command "${sbindir}/${g_program}-lite $g_debugging $verbose $timestamp save"; then
+			progress_message3 "Configuration on system $system saved"
+		    else
+			exitstatus=$?
+		    fi
+		fi
+	    fi
 	else
-	    rsh_command "${sbindir}/${g_program}-lite $g_debugging $verbose $timestamp start" && \
-	    progress_message3 "System $system started" || saveit=
-	fi
-
-	if [ -n "$saveit" ]; then
-	    rsh_command "${sbindir}/${g_program}-lite $g_debugging $verbose $timestamp save" && \
-	    progress_message3 "Configuration on system $system saved"
+	    exitstatus=$?
 	fi
+    else
+	exitstatus=$?
     fi
+
+    return $exitstatus
 }
 
 #
@@ -1645,7 +1671,7 @@ compiler_command() {
 	    shift
 	    update_command $@
 	    ;;
-	remote-start|remote-reload-reload|remote-restart)
+	remote-start|remote-reload|remote-restart)
 	    shift
 	    remote_reload_command $@
 	    ;;

Shorewall/manpages/shorewall-accounting.xml

@@ -403,13 +403,15 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">DESTINATION</emphasis> (dest) - {<emphasis
+        <term><emphasis role="bold">DEST</emphasis> - {<emphasis
         role="bold">-</emphasis>|<emphasis
         role="bold">any</emphasis>|<emphasis
         role="bold">all</emphasis>|<emphasis>interface</emphasis>|<emphasis>interface</emphasis><emphasis
         role="bold">:</emphasis><emphasis>address</emphasis>|<emphasis>address</emphasis>}</term>
 
         <listitem>
+          <para>This column was formerly named DESTINATION.</para>
+
           <para>Packet Destination.</para>
 
           <para>Format same as <emphasis role="bold">SOURCE</emphasis>
@@ -418,7 +420,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">PROTOCOL (proto)</emphasis> - {<emphasis
+        <term><emphasis role="bold">PROTO</emphasis> - {<emphasis
         role="bold">-</emphasis>|<emphasis
         role="bold">{any</emphasis>|<emphasis
         role="bold">all</emphasis>|<emphasis>protocol-name</emphasis>|<emphasis>protocol-number</emphasis>|<emphasis
@@ -428,6 +430,8 @@
         role="bold">all</emphasis>}]}[,...]}</term>
 
         <listitem>
+          <para>This column was formerly named PROTOCOL</para>
+
           <para>A <emphasis>protocol-name</emphasis> (from protocols(5)), a
           <emphasis>protocol-number</emphasis>, <emphasis
           role="bold">ipp2p</emphasis>, <emphasis
@@ -440,8 +444,8 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">DEST PORT(S)</emphasis> (dport) -
-        {<emphasis role="bold">-</emphasis>|<emphasis
+        <term><emphasis role="bold">DPORT</emphasis> - {<emphasis
+        role="bold">-</emphasis>|<emphasis
         role="bold">any</emphasis>|<emphasis
         role="bold">all</emphasis>|<emphasis>ipp2p-option</emphasis>|<emphasis>port-name-or-number</emphasis>[,<emphasis>port-name-or-number</emphasis>]...}</term>
 
@@ -460,12 +464,14 @@
           ("iptables -m ipp2p --help") without the leading "--". If no option
           is given in this column, <emphasis role="bold">ipp2p</emphasis> is
           assumed.</para>
+
+          <para>This column was formerly named DEST PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">SOURCE PORT(S)</emphasis> (sport)-
-        {<emphasis role="bold">-</emphasis>|<emphasis
+        <term><emphasis role="bold">SPORT</emphasis> - {<emphasis
+        role="bold">-</emphasis>|<emphasis
         role="bold">any</emphasis>|<emphasis
         role="bold">all</emphasis>|<emphasis>port-name-or-number</emphasis>[,<emphasis>port-name-or-number</emphasis>]...}</term>
 
@@ -482,20 +488,22 @@
           column, provided that the DEST PORT(S) column is non-empty. This
           causes the rule to match when either the source port or the
           destination port in a packet matches one of the ports specified in
-          DEST PORTS(S). Use of '=' requires multi-port match in your iptables
-          and kernel.</para>
+          DPORT. Use of '=' requires multi-port match in your iptables and
+          kernel.</para>
+
+          <para>This column was formerly labelled SOURCE PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">USER/GROUP</emphasis> (user) - [<emphasis
+        <term><emphasis role="bold">USER</emphasis> - [<emphasis
         role="bold">!</emphasis>][<emphasis>user-name-or-number</emphasis>][<emphasis
         role="bold">:</emphasis><emphasis>group-name-or-number</emphasis>][<emphasis
         role="bold">+</emphasis><emphasis>program-name</emphasis>]</term>
 
         <listitem>
-          <para>This column may only be non-empty if the <emphasis
-          role="bold">CHAIN</emphasis> is <emphasis
+          <para>This column was formerly named USER/GROUP and may only be
+          non-empty if the <emphasis role="bold">CHAIN</emphasis> is <emphasis
           role="bold">OUTPUT</emphasis>.</para>
 
           <para>When this column is non-empty, the rule applies only if the

Shorewall/manpages/shorewall-arprules.xml

@@ -273,7 +273,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>ARP OPCODE - [[!]<replaceable>opcode</replaceable>]</term>
+        <term>OPCODE - [[!]<replaceable>opcode</replaceable>]</term>
 
         <listitem>
           <para>Optional. Describes the type of frame. Possible

Shorewall/manpages/shorewall-conntrack.xml

@@ -424,7 +424,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term>DEST PORT(S) (dport) - port-number/service-name-list</term>
+        <term>DPORT - port-number/service-name-list</term>
 
         <listitem>
           <para>A comma-separated list of port numbers and/or service names
@@ -432,11 +432,13 @@
           ranges of the form
           <replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
           if your kernel and iptables include port range support.</para>
+
+          <para>This column was formerly labelled DEST PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term>SOURCE PORT(S) (sport) - port-number/service-name-list</term>
+        <term>SPORT - port-number/service-name-list</term>
 
         <listitem>
           <para>A comma-separated list of port numbers and/or service names
@@ -446,22 +448,24 @@
           if your kernel and iptables include port range support.</para>
 
           <para>Beginning with Shorewall 4.5.15, you may place '=' in this
-          column, provided that the DEST PORT(S) column is non-empty. This
-          causes the rule to match when either the source port or the
-          destination port in a packet matches one of the ports specified in
-          DEST PORTS(S). Use of '=' requires multi-port match in your iptables
-          and kernel.</para>
+          column, provided that the DPORT column is non-empty. This causes the
+          rule to match when either the source port or the destination port in
+          a packet matches one of the ports specified in DPORT. Use of '='
+          requires multi-port match in your iptables and kernel.</para>
+
+          <para>This column was formerly labelled SOURCE PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term>USER/GROUP (user) ‒
+        <term>USER ‒
         [<replaceable>user</replaceable>][:<replaceable>group</replaceable>]</term>
 
         <listitem>
-          <para>May only be specified if the SOURCE
-          <replaceable>zone</replaceable> is $FW. Specifies the effective user
-          id and or group id of the process sending the traffic.</para>
+          <para>This column was formerly named USER/GROUP and may only be
+          specified if the SOURCE <replaceable>zone</replaceable> is $FW.
+          Specifies the effective user id and or group id of the process
+          sending the traffic.</para>
         </listitem>
       </varlistentry>
 
@@ -520,8 +524,7 @@
 
     <para>Example 1:</para>
 
-    <programlisting>#ACTION                       SOURCE            DEST               PROTO            DEST              SOURCE              USER/GROUP
-#                                                                                   PORT(S)           PORT(S)
+    <programlisting>#ACTION                       SOURCE            DEST               PROTO            DPORT             SPORT               USER
 CT:helper:ftp(expevents=new)  fw                -                  tcp              21              </programlisting>
 
     <para>Example 2 (Shorewall 4.5.10 or later):</para>
@@ -529,14 +532,12 @@ CT:helper:ftp(expevents=new)  fw                -                  tcp
     <para>Drop traffic to/from all zones to IP address 1.2.3.4</para>
 
     <programlisting>FORMAT 2
-#ACTION                       SOURCE             DEST               PROTO            DEST              SOURCE              USER/GROUP
-#                                                                                   PORT(S)           PORT(S)
+#ACTION                       SOURCE             DEST               PROTO           DPORT             SPORT               USER
 DROP                          all-:1.2.3.4       -
 DROP                          all                1.2.3.4</programlisting>
 
     <para>or<programlisting>FORMAT 3
-#ACTION                       SOURCE             DEST               PROTO            DEST              SOURCE              USER/GROUP
-#                                                                                   PORT(S)           PORT(S)
+#ACTION                       SOURCE             DEST               PROTO           DPORT             SPORT               USER
 DROP:P                        1.2.3.4            -
 DROP:PO                       -                  1.2.3.4
 </programlisting></para>

Shorewall/manpages/shorewall-exclusion.xml

@@ -76,8 +76,7 @@ z2              net           REJECT</programlisting>
 
         <para>/etc/shorewall/rules:</para>
 
-        <programlisting>#ACTION         SOURCE        DEST        PROTO         DEST
-#                                                       PORT(S)
+        <programlisting>#ACTION         SOURCE        DEST        PROTO         DPORT
 ACCEPT          all!z2        net         tcp           22</programlisting>
 
         <para>In this case, SSH connections from <emphasis

Shorewall/manpages/shorewall-ipsets.xml

@@ -57,7 +57,7 @@
       <option>dst</option>. Example: myset[src,dst].</member>
     </simplelist>
 
-    <para>In a SOURCE or SOURCE PORT(S) column, the following pairs are
+    <para>In a SOURCE or SPORT column, the following pairs are
     equivalent:</para>
 
     <itemizedlist>
@@ -66,7 +66,7 @@
       </listitem>
     </itemizedlist>
 
-    <para>In a DEST or DEST PORT(S) column, the following pairs are
+    <para>In a DEST or DPORT column, the following pairs are
     equivalent:</para>
 
     <itemizedlist>

Shorewall/manpages/shorewall-mangle.xml

@@ -570,8 +570,7 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
                 that problem. SAME may be used in the PREROUTING and OUTPUT
                 chains. When used in PREROUTING, it causes matching
                 connections from an individual local system to all use the
-                same provider. For example: <programlisting>#ACTION           SOURCE         DEST         PROTO      DEST
-#                                                        PORT(S)
+                same provider. For example: <programlisting>#ACTION           SOURCE         DEST         PROTO      DPORT
 SAME:P            192.168.1.0/24 0.0.0.0/0    tcp        80,443</programlisting>
                 If a host in 192.168.1.0/24 attempts a connection on TCP port
                 80 or 443 and it has sent a packet on either of those ports in
@@ -581,8 +580,7 @@ SAME:P            192.168.1.0/24 0.0.0.0/0    tcp        80,443</programlisting>
 
                 <para>When used in the OUTPUT chain, it causes all matching
                 connections to an individual remote system to all use the same
-                provider. For example:<programlisting>#ACTION           SOURCE         DEST         PROTO      DEST
-#                                                        PORT(S)
+                provider. For example:<programlisting>#ACTION           SOURCE         DEST         PROTO      DPORT
 SAME              $FW            0.0.0.0/0    tcp        80,443</programlisting>The
                 optional <replaceable>timeout</replaceable> parameter was
                 added in Shorewall 4.6.7 and specifies a number of seconds .
@@ -835,7 +833,7 @@ Normal-Service       =&gt; 0x00</programlisting>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">PORT(S)</emphasis> (dport) - {<emphasis
+        <term><emphasis role="bold">DPORT</emphasis>- {<emphasis
         role="bold">-</emphasis>|<emphasis>port-name-number-or-range</emphasis>[<emphasis
         role="bold">,</emphasis><emphasis>port-name-number-or-range</emphasis>]...|+<replaceable>ipset</replaceable>}</term>
 
@@ -863,12 +861,13 @@ Normal-Service       =&gt; 0x00</programlisting>
           <replaceable>ipset</replaceable> name can be specified in this
           column. This is intended to be used with
           <firstterm>bitmap:port</firstterm> ipsets.</para>
+
+          <para>This column was formerly named DEST PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">SOURCE PORT(S)</emphasis> (sport) -
-        {<emphasis
+        <term><emphasis role="bold">SPORT</emphasis> - {<emphasis
         role="bold">-</emphasis>|<emphasis>port-name-number-or-range</emphasis>[<emphasis
         role="bold">,</emphasis><emphasis>port-name-number-or-range</emphasis>]...|+<replaceable>ipset</replaceable>}</term>
 
@@ -882,16 +881,17 @@ Normal-Service       =&gt; 0x00</programlisting>
           the following fields is supplied.</para>
 
           <para>Beginning with Shorewall 4.5.15, you may place '=' in this
-          column, provided that the DEST PORT(S) column is non-empty. This
-          causes the rule to match when either the source port or the
-          destination port in a packet matches one of the ports specified in
-          DEST PORTS(S). Use of '=' requires multi-port match in your iptables
-          and kernel.</para>
+          column, provided that the DPORT column is non-empty. This causes the
+          rule to match when either the source port or the destination port in
+          a packet matches one of the ports specified in DEST PORTS(S). Use of
+          '=' requires multi-port match in your iptables and kernel.</para>
 
           <para>Beginning with Shorewall 4.6.0, an
           <replaceable>ipset</replaceable> name can be specified in this
           column. This is intended to be used with
           <firstterm>bitmap:port</firstterm> ipsets.</para>
+
+          <para>This column was formerly labelled SOURCE PORT(S).</para>
         </listitem>
       </varlistentry>
 
@@ -1097,8 +1097,7 @@ Normal-Service       =&gt; 0x00</programlisting>
           by the named helper module.</para>
 
           <para>Example: Mark all FTP data connections with mark
-          4:<programlisting>#ACTION   SOURCE    DEST      PROTO   PORT(S)    SOURCE  USER TEST LENGTH TOS CONNBYTES HELPER
-#                                                PORT(S)
+          4:<programlisting>#ACTION   SOURCE    DEST      PROTO   DPORT      SPORT   USER TEST LENGTH TOS CONNBYTES HELPER
 4:T       0.0.0.0/0 0.0.0.0/0 TCP     -          -       -    -    -      -   -         ftp</programlisting></para>
         </listitem>
       </varlistentry>
@@ -1287,8 +1286,7 @@ Normal-Service       =&gt; 0x00</programlisting>
 
           <para>We assume packet/connection mark 0 means unclassified.</para>
 
-          <programlisting>       #ACTION    SOURCE    DEST         PROTO   PORT(S)       SOURCE  USER    TEST
-       #                                                       PORT(S)
+          <programlisting>       #ACTION    SOURCE    DEST         PROTO   DPORT         SPORT   USER    TEST
        MARK(1):T  0.0.0.0/0 0.0.0.0/0    icmp    echo-request
        MARK(1):T  0.0.0.0/0 0.0.0.0/0    icmp    echo-reply
        RESTORE:T  0.0.0.0/0 0.0.0.0/0    all     -             -       -       0
@@ -1313,8 +1311,7 @@ Normal-Service       =&gt; 0x00</programlisting>
 
           <programlisting>/etc/shorewall/tcrules:
 
-       #ACTION            SOURCE         DEST         PROTO   PORT(S)       SOURCE  USER    TEST
-       #                                                                    PORT(S)
+       #ACTION            SOURCE         DEST         PROTO   DPORT         SPORT   USER    TEST
        CONNMARK(1-3):F    192.168.1.0/24 eth0 ; state=NEW
 
 /etc/shorewall/masq:

Shorewall/manpages/shorewall-masq.xml

@@ -249,7 +249,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">PORT(S)</emphasis> (Optional) -
+        <term><emphasis role="bold">PORT</emphasis> (Optional) -
         {-|[!]<emphasis>port-name-or-number</emphasis>[,<emphasis>port-name-or-number</emphasis>]...|+<replaceable>ipset</replaceable>}</term>
 
         <listitem>
@@ -429,13 +429,14 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">USER/GROUP</emphasis> (Optional) -
-        [<emphasis
+        <term><emphasis role="bold">USER</emphasis> (Optional) - [<emphasis
         role="bold">!</emphasis>][<emphasis>user-name-or-number</emphasis>][<emphasis
         role="bold">:</emphasis><emphasis>group-name-or-number</emphasis>][<emphasis
         role="bold">+</emphasis><emphasis>program-name</emphasis>]</term>
 
         <listitem>
+          <para>This column was formerly labelled USER/GROUP.</para>
+
           <para>Only locally-generated connections will match if this column
           is non-empty.</para>
 
@@ -538,8 +539,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">ORIGINAL DEST</emphasis> (origdest) -
-        [<emphasis
+        <term><emphasis role="bold">ORIGDEST</emphasis> - [<emphasis
         role="bold">-</emphasis>|<emphasis>address</emphasis>[,<emphasis>address</emphasis>]...[<emphasis>exclusion</emphasis>]|<emphasis>exclusion</emphasis>]</term>
 
         <listitem>
@@ -550,6 +550,8 @@
           original destination address matches one of the listed addresses. It
           is useful for specifying that SNAT should occur only for connections
           that were acted on by a DNAT when they entered the firewall.</para>
+
+          <para>This column was formerly labelled ORIGINAL DEST.</para>
         </listitem>
       </varlistentry>
 
@@ -639,7 +641,7 @@
           172.20.1.0/29 to be sent from eth0 with source IP address
           206.124.146.176.</para>
 
-          <programlisting>        #INTERFACE   SOURCE           ADDRESS         PROTO   PORT(S)
+          <programlisting>        #INTERFACE   SOURCE           ADDRESS         PROTO   DPORT
         eth0         172.20.1.0/29    206.124.146.177 tcp     smtp
         eth0         172.20.1.0/29    206.124.146.176</programlisting>
 
@@ -672,8 +674,7 @@
 
           <programlisting>/etc/shorewall/tcrules:
 
-       #ACTION   SOURCE         DEST         PROTO   PORT(S)       SOURCE  USER    TEST
-       #                                                           PORT(S)
+       #ACTION   SOURCE         DEST         PROTO   DPORT         SPORT    USER    TEST
        1-3:CF    192.168.1.0/24 eth0 ; state=NEW
 
 /etc/shorewall/masq:

Shorewall/manpages/shorewall-nat.xml

@@ -106,15 +106,16 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">ALL INTERFACES</emphasis> (allints) -
-        [<emphasis role="bold">Yes</emphasis>|<emphasis
-        role="bold">No</emphasis>]</term>
+        <term><emphasis role="bold">ALLINTS</emphasis> - [<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
 
         <listitem>
           <para>If Yes or yes, NAT will be effective from all hosts. If No or
           no (or left empty) then NAT will be effective only through the
           interface named in the <emphasis role="bold">INTERFACE</emphasis>
           column.</para>
+
+          <para>This column was formerly labelled ALL INTERFACES.</para>
         </listitem>
       </varlistentry>
 
@@ -160,8 +161,7 @@ smc     eth0:10.1.10.0/24</programlisting>
 
     <para><filename>/etc/shorewall/nat</filename>:</para>
 
-    <programlisting>#EXTERNAL       INTERFACE       INTERNAL        ALL             LOCAL
-#                                               INTERFACES
+    <programlisting>#EXTERNAL       INTERFACE       INTERNAL        ALLINTS         LOCAL
 10.1.10.100     eth0            172.20.1.100
 </programlisting>
 
@@ -170,8 +170,7 @@ smc     eth0:10.1.10.0/24</programlisting>
 
     <para><filename>/etc/shorewall/rules</filename>:</para>
 
-    <programlisting>#ACTION         SOURCE          DEST            PROTO   DEST    SOURCE          ORIGINAL        RATE            USER/   MARK    CONNLIMIT       TIME            HEADERS     SWITCH           HELPER
-#                                                       PORT    PORT(S)         DEST            LIMIT           GROUP
+    <programlisting>#ACTION         SOURCE          DEST            PROTO   DPORT   SPORT           ORIGDEST        RATE            USER    MARK    CONNLIMIT       TIME            HEADERS     SWITCH           HELPER
 ?SECTION ALL
 ?SECTION ESTABLISHED
 ?SECTION RELATED

Shorewall/manpages/shorewall-nesting.xml

@@ -82,7 +82,7 @@
 
     <para>Partial <filename>/etc/shorewall/rules</filename>:</para>
 
-    <programlisting>        #ACTION   SOURCE    DEST            PROTO    DEST PORT(S)
+    <programlisting>        #ACTION   SOURCE    DEST            PROTO    DPORT
         ...
         DNAT      sam       loc:192.168.1.3 tcp      ssh
         DNAT      net       loc:192.168.1.5 tcp      www
@@ -100,7 +100,7 @@
     Because of the way that Netfilter is constructed, this requires two rules
     as follows:</para>
 
-    <programlisting>        #ACTION   SOURCE    DEST            PROTO    DEST PORT(S)
+    <programlisting>        #ACTION   SOURCE    DEST            PROTO    DPORT
         ...
         ACCEPT+   sam       $FW             tcp      ssh
         DNAT      net       loc:192.168.1.3 tcp      ssh
@@ -143,8 +143,7 @@
     </itemizedlist>
 
     <para>As a consequence, the following rules will have unexpected
-    behavior:<programlisting>        #ACTION     SOURCE               DEST      PROTO        DEST
-        #                                                       PORT(S)
+    behavior:<programlisting>        #ACTION     SOURCE               DEST      PROTO        DPORT
         ACCEPT      net                  dmz       tcp          80
         REDIRECT    loc                  3128      tcp          80</programlisting></para>
 
@@ -173,8 +172,7 @@
 
     <para>When using other Shorewall versions, another way is to rewrite the
     DNAT rule (assume that the local zone is entirely within
-    192.168.2.0/23):<programlisting>        #ACTION     SOURCE                 DEST      PROTO      DEST
-        #                                                       PORT(S)
+    192.168.2.0/23):<programlisting>        #ACTION     SOURCE                 DEST      PROTO      DPORT
         ACCEPT      net                    dmz       tcp        80
         REDIRECT    loc:192.168.2.0/23     3128      tcp        80</programlisting></para>
 

Shorewall/manpages/shorewall-netmap.xml

@@ -137,7 +137,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">DEST PORT(S) (dport)</emphasis> -
+        <term><emphasis role="bold">DPORT</emphasis> -
         <emphasis>port-number-or-name-list</emphasis></term>
 
         <listitem>
@@ -160,11 +160,13 @@
           <para>An entry in this field requires that the PROTO column specify
           icmp (1), tcp (6), udp (17), sctp (132) or udplite (136). Use '-' if
           any of the following field is supplied.</para>
+
+          <para>This column was formerly labelled DEST PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">SOURCE PORT(S) (sport)</emphasis> -
+        <term><emphasis role="bold">SPORT</emphasis> -
         <emphasis>port-number-or-name-list</emphasis></term>
 
         <listitem>
@@ -176,6 +178,8 @@
           <para>An entry in this field requires that the PROTO column specify
           tcp (6), udp (17), sctp (132) or udplite (136). Use '-' if any of
           the following fields is supplied.</para>
+
+          <para>This column was formerly labelled SOURCE PORT(S).</para>
         </listitem>
       </varlistentry>
     </variablelist>

Shorewall/manpages/shorewall-routestopped.xml

@@ -1,237 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
-"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
-<refentry>
-  <refmeta>
-    <refentrytitle>shorewall-routestopped</refentrytitle>
-
-    <manvolnum>5</manvolnum>
-
-    <refmiscinfo>Configuration Files</refmiscinfo>
-  </refmeta>
-
-  <refnamediv>
-    <refname>routestopped</refname>
-
-    <refpurpose>The Shorewall file that governs what traffic flows through the
-    firewall while it is in the 'stopped' state.</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <cmdsynopsis>
-      <command>/etc/shorewall/routestopped</command>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para>This file is deprecated in favor of the <ulink
-    url="/manpages/shorewall-stoppedrules.html">shorewall-stoppedrules</ulink>(5)
-    file.</para>
-
-    <para>This file is used to define the hosts that are accessible when the
-    firewall is stopped or is being stopped.</para>
-
-    <warning>
-      <para>Changes to this file do not take effect until after the next
-      <command>shorewall start</command> or <command>shorewall
-      restart</command> command.</para>
-    </warning>
-
-    <para>The columns in the file are as follows (where the column name is
-    followed by a different name in parentheses, the different name is used in
-    the alternate specification syntax).</para>
-
-    <variablelist>
-      <varlistentry>
-        <term><emphasis role="bold">INTERFACE</emphasis> -
-        <emphasis>interface</emphasis></term>
-
-        <listitem>
-          <para>Interface through which host(s) communicate with the
-          firewall</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">HOST(S)</emphasis> (hosts) - [<emphasis
-        role="bold">-</emphasis>|<emphasis>address</emphasis>[,<emphasis>address</emphasis>]...]</term>
-
-        <listitem>
-          <para>Optional. Comma-separated list of IP/subnet addresses. If your
-          kernel and iptables include iprange match support, IP address ranges
-          are also allowed.</para>
-
-          <para>If left empty or supplied as "-", 0.0.0.0/0 is assumed.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">OPTIONS</emphasis> - [<emphasis
-        role="bold">-</emphasis>|<emphasis>option</emphasis>[<emphasis
-        role="bold">,</emphasis><emphasis>option</emphasis>]...]</term>
-
-        <listitem>
-          <para>Optional. A comma-separated list of options. The order of the
-          options is not important but the list can contain no embedded
-          white-space. The currently-supported options are:</para>
-
-          <variablelist>
-            <varlistentry>
-              <term><emphasis role="bold">routeback</emphasis></term>
-
-              <listitem>
-                <para>Set up a rule to ACCEPT traffic from these hosts back to
-                themselves. Beginning with Shorewall 4.4.9, this option is
-                automatically set if <emphasis
-                role="bold">routeback</emphasis> is specified in <ulink
-                url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>
-                (5) or if the rules compiler detects that the interface is a
-                bridge.</para>
-              </listitem>
-            </varlistentry>
-
-            <varlistentry>
-              <term><emphasis role="bold">source</emphasis></term>
-
-              <listitem>
-                <para>Allow traffic from these hosts to ANY destination.
-                Without this option or the <emphasis
-                role="bold">dest</emphasis> option, only traffic from this
-                host to other listed hosts (and the firewall) is allowed. If
-                <emphasis role="bold">source</emphasis> is specified then
-                <emphasis role="bold">routeback</emphasis> is
-                redundant.</para>
-              </listitem>
-            </varlistentry>
-
-            <varlistentry>
-              <term><emphasis role="bold">dest</emphasis></term>
-
-              <listitem>
-                <para>Allow traffic to these hosts from ANY source. Without
-                this option or the <emphasis role="bold">source</emphasis>
-                option, only traffic from this host to other listed hosts (and
-                the firewall) is allowed. If <emphasis
-                role="bold">dest</emphasis> is specified then <emphasis
-                role="bold">routeback</emphasis> is redundant.</para>
-              </listitem>
-            </varlistentry>
-
-            <varlistentry>
-              <term><emphasis role="bold">notrack</emphasis></term>
-
-              <listitem>
-                <para>The traffic will be exempted from connection
-                tracking.</para>
-              </listitem>
-            </varlistentry>
-          </variablelist>
-
-          <note>
-            <para>The <emphasis role="bold">source</emphasis> and <emphasis
-            role="bold">dest</emphasis> options work best when used in
-            conjunction with ADMINISABSENTMINDED=Yes in <ulink
-            url="shorewall6.conf.html">shorewall6.conf</ulink>(5).</para>
-          </note>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>PROTO (Optional) ‒
-        <replaceable>protocol-name-or-number</replaceable></term>
-
-        <listitem>
-          <para>Protocol.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>DEST PORT(S) (dport) ‒
-        <replaceable>service-name/port-number-list</replaceable></term>
-
-        <listitem>
-          <para>Optional. A comma-separated list of port numbers and/or
-          service names from <filename>/etc/services</filename>. May also
-          include port ranges of the form
-          <replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
-          if your kernel and iptables include port range support.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>SOURCE PORT(S) (sport) ‒
-        <replaceable>service-name/port-number-list</replaceable></term>
-
-        <listitem>
-          <para>Optional. A comma-separated list of port numbers and/or
-          service names from <filename>/etc/services</filename>. May also
-          include port ranges of the form
-          <replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
-          if your kernel and iptables include port range support.</para>
-
-          <para>Beginning with Shorewall 4.5.15, you may place '=' in this
-          column, provided that the DEST PORT(S) column is non-empty. This
-          causes the rule to match when either the source port or the
-          destination port in a packet matches one of the ports specified in
-          DEST PORTS(S). Use of '=' requires multi-port match in your iptables
-          and kernel.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-
-    <note>
-      <para>The <emphasis role="bold">source</emphasis> and <emphasis
-      role="bold">dest</emphasis> options work best when used in conjunction
-      with ADMINISABSENTMINDED=Yes in <ulink
-      url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
-    </note>
-  </refsect1>
-
-  <refsect1>
-    <title>Example</title>
-
-    <variablelist>
-      <varlistentry>
-        <term>Example 1:</term>
-
-        <listitem>
-          <programlisting>        #INTERFACE      HOST(S)                 OPTIONS         PROTO          DEST       SOURCE
-        #                                                                      PORT(S)    PORT(S)
-        eth2            192.168.1.0/24
-        eth0            192.0.2.44
-        br0             -                       routeback
-        eth3            -                       source
-        eth4            -                       notrack        41</programlisting>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>FILES</title>
-
-    <para>/etc/shorewall/routestopped</para>
-  </refsect1>
-
-  <refsect1>
-    <title>See ALSO</title>
-
-    <para><ulink
-    url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>
-
-    <para><ulink
-    url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
-
-    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
-    shorewall-rtrules(5), shorewall-rules(5), shorewall.conf(5),
-    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
-    shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
-    shorewall-zones(5)</para>
-  </refsect1>
-</refentry>

Shorewall/manpages/shorewall-rules.xml

@@ -173,9 +173,9 @@
 
       <listitem>
         <para>The remaining columns specify characteristics of the packet
-        before rewriting. In particular, the ORIGINAL DEST column gives the
-        original destination IP address of the packet and the DEST PORT(S)
-        column give the original destination port(s).</para>
+        before rewriting. In particular, the ORIGDEST column gives the
+        original destination IP address of the packet and the DPORT column
+        give the original destination port(s).</para>
       </listitem>
     </itemizedlist>
 
@@ -241,7 +241,7 @@
 
             <varlistentry>
               <term><emphasis
-              role="bold">ADD(<replaceable>ipset</replaceable>:<replaceable>flags</replaceable>)</emphasis></term>
+              role="bold">ADD(<replaceable>ipset</replaceable>:<replaceable>flags</replaceable>[:<replaceable>timeout</replaceable>])</emphasis></term>
 
               <listitem>
                 <para>Added in Shorewall 4.4.12. Causes addresses and/or port
@@ -256,6 +256,12 @@
                 role="bold">dst</emphasis> respectively (see the -A command in
                 ipset (8)).</para>
 
+                <para>Beginning with Shorewall 5.0.3, an optional
+                <replaceable>timeout</replaceable> can be specified. This is
+                the number of seconds that the new entry in the ipset is to
+                remain valid and overrides any timeout specified when the
+                ipset was created.</para>
+
                 <para>ADD is non-terminating. Even if a packet matches the
                 rule, it is passed on to the next rule.</para>
               </listitem>
@@ -1201,8 +1207,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">DEST PORT(S) (dport)</emphasis> -
-        {<emphasis
+        <term><emphasis role="bold">DPORT</emphasis> - {<emphasis
         role="bold">-</emphasis>|<emphasis>port-name-number-or-range</emphasis>[<emphasis
         role="bold">,</emphasis><emphasis>port-name-number-or-range</emphasis>]...|+<replaceable>ipset</replaceable>}</term>
 
@@ -1234,7 +1239,7 @@
 
           <para>If your kernel contains multi-port match support, then only a
           single Netfilter rule will be generated if in this list and the
-          <emphasis role="bold">CLIENT PORT(S)</emphasis> list below:</para>
+          <emphasis role="bold">SPORT</emphasis> list below:</para>
 
           <para>1. There are 15 or less ports listed.</para>
 
@@ -1245,12 +1250,13 @@
           <replaceable>ipset</replaceable> name can be specified in this
           column. This is intended to be used with
           <firstterm>bitmap:port</firstterm> ipsets.</para>
+
+          <para>This column was formerly labelled DEST PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">SOURCE PORT(S)</emphasis> (sport) -
-        {<emphasis
+        <term><emphasis role="bold">SPORT</emphasis> - {<emphasis
         role="bold">-</emphasis>|<emphasis>port-name-number-or-range</emphasis>[<emphasis
         role="bold">,</emphasis><emphasis>port-name-number-or-range</emphasis>]...|+<replaceable>ipset</replaceable>}</term>
 
@@ -1260,11 +1266,10 @@
           names, port numbers or port ranges.</para>
 
           <para>Beginning with Shorewall 4.5.15, you may place '=' in this
-          column, provided that the DEST PORT(S) column is non-empty. This
-          causes the rule to match when either the source port or the
-          destination port in a packet matches one of the ports specified in
-          DEST PORTS(S). Use of '=' requires multi-port match in your iptables
-          and kernel.</para>
+          column, provided that the DPORT column is non-empty. This causes the
+          rule to match when either the source port or the destination port in
+          a packet matches one of the ports specified in DEST PORTS(S). Use of
+          '=' requires multi-port match in your iptables and kernel.</para>
 
           <warning>
             <para>Unless you really understand IP, you should leave this
@@ -1274,12 +1279,12 @@
           </warning>
 
           <para>If you don't want to restrict client ports but need to specify
-          an <emphasis role="bold">ORIGINAL DEST</emphasis> in the next
-          column, then place "-" in this column.</para>
+          an <emphasis role="bold">ORIGDEST</emphasis> in the next column,
+          then place "-" in this column.</para>
 
           <para>If your kernel contains multi-port match support, then only a
           single Netfilter rule will be generated if in this list and the
-          <emphasis role="bold">DEST PORT(S)</emphasis> list above:</para>
+          <emphasis role="bold">DPORT</emphasis> list above:</para>
 
           <para>1. There are 15 or less ports listed.</para>
 
@@ -1290,12 +1295,13 @@
           <replaceable>ipset</replaceable> name can be specified in this
           column. This is intended to be used with
           <firstterm>bitmap:port</firstterm> ipsets.</para>
+
+          <para>This column was formerly labelled SOURCE PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">ORIGINAL DEST</emphasis> (origdest) -
-        [<emphasis
+        <term><emphasis role="bold">ORIGDEST</emphasis> - [<emphasis
         role="bold">-</emphasis>|<emphasis>address</emphasis>[,<emphasis>address</emphasis>]...[<emphasis>exclusion</emphasis>]|<emphasis>exclusion</emphasis>]</term>
 
         <listitem>
@@ -1344,11 +1350,13 @@
           url="/PortKnocking.html">http://www.shorewall.net/PortKnocking.html</ulink>
           for an example of using an entry in this column with a user-defined
           action rule.</para>
+
+          <para>This column was formerly labelled ORIGINAL DEST.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">RATE LIMIT</emphasis> (rate) -
+        <term><emphasis role="bold">RATE</emphasis> -
         <replaceable>limit</replaceable></term>
 
         <listitem>
@@ -1413,11 +1421,13 @@
           enforce the per-source limit and the compiler will pick a unique
           name for the hash table that tracks the per-destination
           limit.</para>
+
+          <para>This column was formerly labelled RATE LIMIT.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">USER/GROUP</emphasis> (user) - [<emphasis
+        <term><emphasis role="bold">USER</emphasis> - [<emphasis
         role="bold">!</emphasis>][<emphasis>user-name-or-number</emphasis>][<emphasis
         role="bold">:</emphasis><emphasis>group-name-or-number</emphasis>][,...]</term>
 
@@ -1471,6 +1481,8 @@
               </listitem>
             </varlistentry>
           </variablelist>
+
+          <para>This column was formerly labelled USER/GROUP.</para>
         </listitem>
       </varlistentry>
 
@@ -1626,6 +1638,8 @@
               <listitem>
                 <para>where <replaceable>dd</replaceable> is an ordinal day of
                 the month</para>
+
+                <para/>
               </listitem>
             </varlistentry>
 
@@ -1767,9 +1781,8 @@
         <listitem>
           <para>Accept SMTP requests from the DMZ to the internet</para>
 
-          <programlisting>         #ACTION SOURCE  DEST PROTO      DEST    SOURCE  ORIGINAL
-         #                               PORT    PORT(S) DEST
-         ACCEPT  dmz     net       tcp   smtp</programlisting>
+          <programlisting>         #ACTION SOURCE  DEST      PROTO      DPORT   SPORT   ORIGDEST
+         ACCEPT  dmz     net       tcp        smtp</programlisting>
         </listitem>
       </varlistentry>
 
@@ -1780,8 +1793,7 @@
           <para>Forward all ssh and http connection requests from the internet
           to local system 192.168.1.3</para>
 
-          <programlisting>        #ACTION SOURCE  DEST            PROTO   DEST    SOURCE  ORIGINAL
-        #                                       PORT    PORT(S) DEST
+          <programlisting>        #ACTION SOURCE  DEST            PROTO   DPORT   SPORT   ORIGDEST
         DNAT    net     loc:192.168.1.3 tcp     ssh,http</programlisting>
         </listitem>
       </varlistentry>
@@ -1792,9 +1804,8 @@
         <listitem>
           <para>Forward all http connection requests from the internet to
           local system 192.168.1.3 with a limit of 3 per second and a maximum
-          burst of 10<programlisting>        #ACTION SOURCE DEST            PROTO  DEST  SOURCE  ORIGINAL RATE
-        #                                     PORT  PORT(S) DEST     LIMIT
-        DNAT    net    loc:192.168.1.3 tcp    http  -       -        3/sec:10</programlisting></para>
+          burst of 10<programlisting>        #ACTION SOURCE DEST             PROTO  DPORT SPORT   ORIGDEST RATE
+        DNAT    net    loc:192.168.1.3  tcp    http  -       -        3/sec:10</programlisting></para>
         </listitem>
       </varlistentry>
 
@@ -1806,8 +1817,7 @@
           port 3128 on the firewall (Squid running on the firewall system)
           except when the destination address is 192.168.2.2</para>
 
-          <programlisting>        #ACTION  SOURCE DEST      PROTO DEST    SOURCE  ORIGINAL
-        #                               PORT    PORT(S) DEST
+          <programlisting>        #ACTION  SOURCE DEST      PROTO DPORT   SPORT   ORIGDEST
         REDIRECT loc    3128      tcp   www      -      !192.168.2.2</programlisting>
         </listitem>
       </varlistentry>
@@ -1819,8 +1829,7 @@
           <para>All http requests from the internet to address 130.252.100.69
           are to be forwarded to 192.168.1.3</para>
 
-          <programlisting>        #ACTION  SOURCE DEST            PROTO   DEST    SOURCE  ORIGINAL
-        #                                       PORT    PORT(S) DEST
+          <programlisting>        #ACTION  SOURCE DEST            PROTO   DPORT   SPORT   ORIGDEST
         DNAT      net   loc:192.168.1.3 tcp     80      -       130.252.100.69</programlisting>
         </listitem>
       </varlistentry>
@@ -1832,10 +1841,9 @@
           <para>You want to accept SSH connections to your firewall only from
           internet IP addresses 130.252.100.69 and 130.252.100.70</para>
 
-          <programlisting>        #ACTION  SOURCE DEST            PROTO   DEST    SOURCE  ORIGINAL
-        #                                       PORT    PORT(S) DEST
-        ACCEPT   net:130.252.100.69,130.252.100.70 $FW \
-                                        tcp     22</programlisting>
+          <programlisting>        #ACTION  SOURCE DEST            PROTO   DPORT   SPORT   ORIGDEST
+        ACCEPT   net:130.252.100.69,130.252.100.70 \
+                        $FW             tcp     22</programlisting>
         </listitem>
       </varlistentry>
 
@@ -1847,8 +1855,7 @@
           firewall on port 2222 and you want to forward them to local system
           192.168.1.3, port 22</para>
 
-          <programlisting>        #ACTION  SOURCE DEST                PROTO   DEST    SOURCE  ORIGINAL
-        #                                           PORT    PORT(S) DEST
+          <programlisting>        #ACTION  SOURCE DEST                PROTO   DPORT   SPORT   ORIGDEST
         DNAT     net    loc:192.168.1.3:22  tcp     2222</programlisting>
         </listitem>
       </varlistentry>
@@ -1860,8 +1867,7 @@
           <para>You want to redirect connection requests to port 80 randomly
           to the port range 81-90.</para>
 
-          <programlisting>        #ACTION  SOURCE DEST                PROTO DEST    SOURCE  ORIGINAL
-        #                                         PORT    PORT(S) DEST
+          <programlisting>        #ACTION  SOURCE DEST                PROTO DPORT   SPORT   ORIGDEST
         REDIRECT net    $FW::81-90:random   tcp   www</programlisting>
         </listitem>
       </varlistentry>
@@ -1897,8 +1903,7 @@
 
           <para>rules:</para>
 
-          <programlisting>        #ACTION     SOURCE          DEST       PROTO       DEST
-        #                                                  PORT(S)
+          <programlisting>        #ACTION     SOURCE          DEST       PROTO       DPORT
         REDIRECT    loc             3128       tcp         80                                                   </programlisting>
 
           <simpara>Note that it would have been tempting to simply define the
@@ -1926,8 +1931,7 @@
           <para>Add the tuple (source IP, dest port, dest IP) of an incoming
           SSH connection to the ipset S:</para>
 
-          <programlisting>        #ACTION                       SOURCE           DEST           PROTO       DEST
-        #                                                                         PORT(S)
+          <programlisting>        #ACTION                       SOURCE           DEST           PROTO       DPORT
         ADD(+S:dst,src,dst)           net              fw             tcp         22</programlisting>
         </listitem>
       </varlistentry>
@@ -1939,8 +1943,7 @@
           <para>You wish to limit SSH connections from remote systems to 1/min
           with a burst of three (to allow for limited retry):</para>
 
-          <programlisting>        #ACTION     SOURCE          DEST       PROTO       DEST         SOURCE    ORIGINAL         RATE
-        #                                                  PORT(S)      PORT(S)   DEST             LIMIT
+          <programlisting>        #ACTION     SOURCE          DEST       PROTO       DPORT        SPORT     ORIGDEST         RATE
         SSH(ACCEPT) net             all        -           -            -         -                s:1/min:3</programlisting>
         </listitem>
       </varlistentry>
@@ -1952,8 +1955,7 @@
           <para>Forward port 80 to dmz host $BACKUP if switch 'primary_down'
           is on.</para>
 
-          <programlisting>        #ACTION     SOURCE          DEST        PROTO       DEST         SOURCE    ORIGINAL   RATE      USER/     MARK    CONNLIMIT     TIME     HEADERS    SWITCH
-        #                                                   PORT(S)      PORT(S)   DEST       LIMIT     GROUP
+          <programlisting>        #ACTION     SOURCE          DEST        PROTO       DPORT        SPORT     ORIGDEST   RATE      USER      MARK    CONNLIMIT     TIME     HEADERS    SWITCH
         DNAT        net             dmz:$BACKUP tcp         80           -         -          -         -         -       -             -        -          primary_down</programlisting>
         </listitem>
       </varlistentry>
@@ -1965,8 +1967,7 @@
           <para>Drop all email from the <emphasis>Anonymous Proxy</emphasis>
           and <emphasis>Satellite Provider</emphasis> address ranges:</para>
 
-          <programlisting>        #ACTION                       SOURCE           DEST           PROTO       DEST
-        #                                                                         PORT(S)
+          <programlisting>        #ACTION                       SOURCE           DEST           PROTO       DPORT
         DROP                          net:^A1,A2       fw             tcp         25</programlisting>
         </listitem>
       </varlistentry>
@@ -1978,8 +1979,7 @@
           <para>You want to generate your own rule involving iptables targets
           and matches not supported by Shorewall.</para>
 
-          <programlisting>        #ACTION                       SOURCE           DEST           PROTO       DEST
-        #                                                                         PORT(S)
+          <programlisting>        #ACTION                       SOURCE           DEST           PROTO       DPORT
         INLINE                        $FW              net ; -p 6 -m mickey-mouse --name test -m set --match-set set1 src -m mickey-mouse --name test2 -j SECCTX --name test3</programlisting>
 
           <para>The above will generate the following iptables-restore

Shorewall/manpages/shorewall-secmarks.xml

@@ -93,7 +93,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">CHAIN:STATE (chain) -
+        <term><emphasis role="bold">CHAIN -
         {P|I|F|O|T}[:{N|I|U|IU|NI|NU|NIU|NUI:E|ER}]</emphasis></term>
 
         <listitem>
@@ -140,6 +140,8 @@
 
             <member>:NIU - NEW, INVALID or UNTRACKED connection.</member>
           </simplelist>
+
+          <para>This column was formerly labelled CHAIN:STATE.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -236,7 +238,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">PORT(S)</emphasis> (dport) - [<emphasis
+        <term><emphasis role="bold">DPORT</emphasis> - [<emphasis
         role="bold">-</emphasis>|<emphasis>port-name-number-or-range</emphasis>[<emphasis
         role="bold">,</emphasis><emphasis>port-name-number-or-range</emphasis>]...]</term>
 
@@ -259,12 +261,13 @@
           <para>This column is ignored if PROTOCOL = all but must be entered
           if any of the following field is supplied. In that case, it is
           suggested that this field contain "-"</para>
+
+          <para>This column was formerly labelled DEST PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">SOURCE PORT(S)</emphasis> (sport) -
-        [<emphasis
+        <term><emphasis role="bold">SPORT</emphasis> - [<emphasis
         role="bold">-</emphasis>|<emphasis>port-name-number-or-range</emphasis>[<emphasis
         role="bold">,</emphasis><emphasis>port-name-number-or-range</emphasis>]...]</term>
 
@@ -272,6 +275,8 @@
           <para>Optional source port(s). If omitted, any source port is
           acceptable. Specified as a comma-separated list of port names, port
           numbers or port ranges.</para>
+
+          <para>This column was formerly labelled SOURCE PORT(S).</para>
         </listitem>
       </varlistentry>
 
@@ -388,8 +393,7 @@
 
     <para><filename>/etc/shorewall/secmarks</filename>:</para>
 
-    <programlisting>#SECMARK                              CHAIN:     SOURCE  DEST       PROTO   DEST       SOURCE      USER/     MARK
-#                                     STATE                                 PORT(S)    PORT(S)     GROUP
+    <programlisting>#SECMARK                              CHAIN      SOURCE  DEST       PROTO   DPORT      SPORT       USER      MARK       
 system_u:object_r:mysqld_packet_t:s0  I:N        lo      127.0.0.1  tcp     3306
 SAVE                                  I:N        lo      127.0.0.1  tcp     3306
 RESTORE                               I:ER</programlisting>

Shorewall/manpages/shorewall-stoppedrules.xml

@@ -112,7 +112,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">DEST PORT(S) (dport)</emphasis> ‒
+        <term><emphasis role="bold">DPORT</emphasis> ‒
         <replaceable>service-name/port-number-list</replaceable></term>
 
         <listitem>
@@ -121,11 +121,13 @@
           include port ranges of the form
           <replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
           if your kernel and iptables include port range support.</para>
+
+          <para>This column was formerly labelled DEST PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">SOURCE PORT(S) (sport)</emphasis> ‒
+        <term><emphasis role="bold">SPORT</emphasis> ‒
         <replaceable>service-name/port-number-list</replaceable></term>
 
         <listitem>
@@ -136,11 +138,12 @@
           if your kernel and iptables include port range support.</para>
 
           <para>Beginning with Shorewall 4.5.15, you may place '=' in this
-          column, provided that the DEST PORT(S) column is non-empty. This
-          causes the rule to match when either the source port or the
-          destination port in a packet matches one of the ports specified in
-          DEST PORTS(S). Use of '=' requires multi-port match in your iptables
-          and kernel.</para>
+          column, provided that the DPORT column is non-empty. This causes the
+          rule to match when either the source port or the destination port in
+          a packet matches one of the ports specified in DEST PORTS(S). Use of
+          '=' requires multi-port match in your iptables and kernel.</para>
+
+          <para>This column was formerly labelled SOURCE PORT(S).</para>
         </listitem>
       </varlistentry>
     </variablelist>

Shorewall/manpages/shorewall-tcfilters.xml

@@ -135,7 +135,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">DEST PORT</emphasis> (dport) - [<emphasis
+        <term><emphasis role="bold">DPORT</emphasis> - [<emphasis
         role="bold">-</emphasis>|<emphasis>port-name-or-number</emphasis>]</term>
 
         <listitem>
@@ -143,16 +143,19 @@
           a <emphasis>port number</emphasis>; if the protocol is <emphasis
           role="bold">icmp</emphasis>, this column is interpreted as the
           destination icmp-type(s).</para>
+
+          <para>This column was previously labelled DEST PORT(S).</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">SOURCE PORT</emphasis> (sport) -
-        [<emphasis
+        <term><emphasis role="bold">SPORT</emphasis> - [<emphasis
         role="bold">-</emphasis>|<emphasis>port-name-or-number</emphasis>]</term>
 
         <listitem>
           <para>Optional source port.</para>
+
+          <para>This column was previously labelled SOURCE PORT(S).</para>
         </listitem>
       </varlistentry>
 
@@ -292,8 +295,7 @@
           ALL cannot be used because IPv4 ICMP and IPv6 ICMP are two different
           protocols.</para>
 
-          <programlisting>       #CLASS    SOURCE    DEST         PROTO   DEST
-       #                                        PORT
+          <programlisting>       #CLASS    SOURCE    DEST         PROTO   DPORT
 
        IPV4
 
@@ -314,8 +316,7 @@
           <para>Add two filters with priority 10 (Shorewall 4.5.8 or
           later).</para>
 
-          <programlisting>       #CLASS    SOURCE    DEST         PROTO   DEST            PRIORITY
-       #                                        PORT
+          <programlisting>       #CLASS    SOURCE    DEST         PROTO   DPORT           PRIORITY
 
        IPV4
 

Shorewall/manpages/shorewall.conf.xml

@@ -1625,11 +1625,11 @@ LOG:info:,bar                        net                    fw</programlisting>
         <listitem>
           <para>This parameter specifies the directory/directories where your
           kernel netfilter modules may be found. If you leave the variable
-          empty, Shorewall will supply the value "/lib/modules/`uname
-          -r`/kernel/net/ipv4/netfilter" in versions of Shorewall prior to
-          3.2.4 and "/lib/modules/`uname
-          -r`/kernel/net/ipv4/netfilter:/lib/modules/`uname
-          -r`/kernel/net/ipv4/netfilter" in later versions.</para>
+          empty, Shorewall will supply the value
+          "/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset"
+          where <emphasis role="bold">uname</emphasis> holds the output of
+          '<command>uname -r</command>' and <emphasis
+          role="bold">g_family</emphasis> holds '4'. </para>
         </listitem>
       </varlistentry>
 

Shorewall/manpages/shorewall.xml

@@ -424,7 +424,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>remote_start</option></arg>
+      <arg choice="plain"><option>remote-start</option></arg>
 
       <arg><option>-s</option></arg>
 
@@ -448,7 +448,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>remote_reload</option></arg>
+      <arg choice="plain"><option>remote-reload</option></arg>
 
       <arg><option>-s</option></arg>
 
@@ -472,7 +472,7 @@
 
       <arg>-<replaceable>options</replaceable></arg>
 
-      <arg choice="plain"><option>remote_restart</option></arg>
+      <arg choice="plain"><option>remote-restart</option></arg>
 
       <arg><option>-s</option></arg>
 
@@ -1522,7 +1522,7 @@
         <listitem>
           <para>This command was re-implemented in Shorewall 5.0.0. The
           pre-5.0.0 <command>reload</command> command is now called
-          <command>remote_restart</command> (see below).</para>
+          <command>remote-restart</command> (see below).</para>
 
           <para>Reload is similar to <emphasis role="bold">shorewall
           start</emphasis> except that it assumes that the firewall is already
@@ -1575,7 +1575,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">remote_start</emphasis>
+        <term><emphasis role="bold">remote-start</emphasis>
         [-<option>s</option>] [-<option>c</option>] [-<option>r</option>
         <replaceable>root-user-name</replaceable>] [-<option>T</option>]
         [-<option>i</option>] [ <replaceable>directory</replaceable> ]
@@ -1637,7 +1637,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">remote_reload
+        <term><emphasis role="bold">remote-reload
         </emphasis>[-<option>s</option>] [-<option>c</option>]
         [-<option>r</option> <replaceable>root-user-name</replaceable>]
         [-<option>T</option>] [-<option>i</option>] [
@@ -1699,7 +1699,7 @@
       </varlistentry>
 
       <varlistentry>
-        <term><emphasis role="bold">remote_restart
+        <term><emphasis role="bold">remote-restart
         </emphasis>[-<option>s</option>] [-<option>c</option>]
         [-<option>r</option> <replaceable>root-user-name</replaceable>]
         [-<option>T</option>] [-<option>i</option>] [

Shorewall/shorewall.service.214

@@ -1,22 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv4 firewall
-Wants=network-online.target
-After=network-online.target
-Conflicts=iptables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall
-StandardOutput=syslog
-ExecStart=/sbin/shorewall $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall $OPTIONS stop
-ExecReload=/sbin/shorewall $OPTIONS reload $RELOADOPTIONS
-
-[Install]
-WantedBy=basic.target

Shorewall/sysconfig

@@ -0,0 +1,25 @@
+# sysV init file script configuration(/etc/sysconfdir/shorewall-lite)
+
+# startup option(default "-vvv")
+OPTIONS=
+
+# change default start run level(if none empty; /etc/init.d/shorewall-lite enable)
+START=50
+
+# change default stop run level(if none empty; /etc/init.d/shorewall-lite enable)
+STOP=
+
+# option to pass when shorewall start is executed
+STARTOPTIONS=
+
+# option to pass when shorewall restart is executed
+RESTARTOPTIONS=
+
+# option to pass when shorewall reload is executed
+RELOADOPTIONS=
+
+# option to pass when shorewall stop is executed
+STOPOPTIONS=
+
+# option to pass when shorewall status is executed
+STATUSOPTIONS=

Shorewall/uninstall.sh

@@ -80,6 +80,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 finished=0
 configure=1
 
@@ -168,8 +173,8 @@ fi
 
 rm -f ${SBINDIR}/shorewall
 
-if [ -L ${SHAREDIR}/shorewall6/init ]; then
-    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall6/init)
+if [ -L ${SHAREDIR}/shorewall/init ]; then
+    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall/init)
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
 fi
@@ -188,17 +193,19 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-if [ -n "$SYSTEMD" ]; then
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+if [ -n "$SERVICEDIR" ]; then
     [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
-    rm -f $SYSTEMD/shorewall.service
+    rm -f $SERVICEDIR/shorewall.service
 fi
 
 rm -rf ${SHAREDIR}/shorewall/version
 rm -rf ${CONFDIR}/shorewall
 
 if [ -n "$SYSCONFDIR" ]; then
-    [ -n "$SYSCONFFILE" ] || SYSCONFFILE=${PRODUCT};
-    rm -f ${SYSCONFDIR}/${SYSCONFFILE}
+    [ -n "$SYSCONFFILE" ] && rm -f ${SYSCONFDIR}/${PRODUCT}
 fi
 
 rm -rf ${VARDIR}/shorewall

Shorewall6-lite/init.openwrt.sh

@@ -0,0 +1,95 @@
+#!/bin/sh /etc/rc.common
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)
+#
+#	On most distributions, this file should be called /etc/init.d/shorewall.
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#	If an error occurs while starting or restarting the firewall, the
+#	firewall is automatically stopped.
+#
+#	Commands are:
+#
+#	   shorewall6-lite start			  Starts the firewall
+#	   shorewall6-lite restart		  Restarts the firewall
+#	   shorewall6-lite reload		  Reload the firewall
+#						  (same as restart)
+#	   shorewall6-lite stop			  Stops the firewall
+#	   shorewall6-lite status		  Displays firewall status
+#
+
+# description: Packet filtering firewall
+
+# openwrt stuph
+# start and stop runlevel variable
+START=50
+STOP=89
+# variable to display what the status command do when /etc/init.d/shorewall6-lite is invoke without argument
+EXTRA_COMMANDS="status"
+EXTRA_HELP="status displays shorewall status"
+
+################################################################################
+# Get startup options (override default)
+################################################################################
+OPTIONS=
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f ${SYSCONFDIR}/$PRODUCT ]; then
+    . ${SYSCONFDIR}/$PRODUCT
+fi
+
+SHOREWALL_INIT_SCRIPT=1
+
+################################################################################
+# E X E C U T I O N    B E G I N S   H E R E				       #
+################################################################################
+# arg1 of init script is arg2 when rc.common is sourced; set to action variable
+command="$action"
+
+start() {
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $STARTOPTIONS
+}
+
+boot() {
+local command="start"
+start
+}
+
+restart() {
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $RESTARTOPTIONS
+}
+
+reload() {
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $RELOADOPTION
+}
+
+stop() {
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $STOPOPTIONS
+}
+
+status() {
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $STATUSOPTIONS
+}

Shorewall6-lite/shorewall6-lite.service.214

@@ -1,21 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv6 firewall (lite)
-Wants=network-online.target
-After=network-online.target
-Conflicts=ip6tables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall6-lite
-StandardOutput=syslog
-ExecStart=/sbin/shorewall6-lite $OPTIONS start
-ExecStop=/sbin/shorewall6-lite $OPTIONS stop
-
-[Install]
-WantedBy=basic.target

Shorewall6-lite/sysconfig

@@ -0,0 +1,25 @@
+# sysV init file script configuration(/etc/sysconfdir/shorewall-lite)
+
+# startup option(default "-vvv")
+OPTIONS=
+
+# change default start run level(if none empty; /etc/init.d/shorewall-lite enable)
+START=50
+
+# change default stop run level(if none empty; /etc/init.d/shorewall-lite enable)
+STOP=
+
+# option to pass when shorewall start is executed
+STARTOPTIONS=
+
+# option to pass when shorewall restart is executed
+RESTARTOPTIONS=
+
+# option to pass when shorewall reload is executed
+RELOADOPTIONS=
+
+# option to pass when shorewall stop is executed
+STOPOPTIONS=
+
+# option to pass when shorewall status is executed
+STATUSOPTIONS=

Shorewall6-lite/uninstall.sh

@@ -28,6 +28,7 @@
 
 VERSION=xxx  #The Build script inserts the actual version
 PRODUCT=shorewall6-lite
+Product="Shorewall6 Lite"
 
 usage() # $1 = exit status
 {
@@ -76,6 +77,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 finished=0
 configure=1
 
@@ -144,16 +150,16 @@ fi
 if [ -f ${SHAREDIR}/shorewall6-lite/version ]; then
     INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall6-lite/version)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: Shorewall Lite Version $INSTALLED_VERSION is installed"
+	echo "WARNING: Shorewall6 Lite Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: Shorewall Lite Version $VERSION is not installed"
+    echo "WARNING: Shorewall6 Lite Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling Shorewall Lite $VERSION"
+echo "Uninstalling Shorewall6 Lite $VERSION"
 
 [ -n "$SANDBOX" ] && configure=0
 
@@ -164,7 +170,15 @@ if [ $configure -eq 1 ]; then
 fi
 
 if [ -f ${SHAREDIR}/shorewall6-lite/init ]; then
-    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall6-lite/init)
+    if [ $HOST = openwrt ]; then
+	if [ $configure -eq 1 ] && /etc/init.d/shorewall6-lite enabled; then
+	    /etc/init.d/shorewall6-lite disable
+	fi
+	
+	FIREWALL=$(readlink ${SHAREDIR}/shorewall6-lite/init)
+    else
+	FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall6-lite/init)
+    fi
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
 fi
@@ -185,20 +199,24 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-if [ -n "$SYSTEMD" ]; then
+[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
+
+if [ -n "$SERVICEDIR" ]; then
     [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
-    rm -f $SYSTEMD/shorewall6-lite.service
+    rm -f $SERVICEDIR/shorewall6-lite.service
 fi
 
 rm -f ${SBINDIR}/shorewall6-lite
 rm -rf ${CONFDIR}/shorewall6-lite
-rm -rf ${VARDIR}/shorewall6-lite
+rm -rf ${VARDIR}
 rm -rf ${SHAREDIR}/shorewall6-lite
 rm -rf ${LIBEXECDIR}/shorewall6-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall6-lite
-[ -n "$SYSTEMD" ] && rm -f  ${SYSTEMD}/shorewall6-lite.service
+rm -f  ${SYSCONFDIR}/shorewall6-lite
 
-rm -f ${MANDIR}/man5/shorewall6-lite*
-rm -f ${MANDIR}/man8/shorewall6-lite*
+if [ -n "${MANDIR}" ]; then
+    rm -f ${MANDIR}/man5/shorewall6-lite*
+    rm -f ${MANDIR}/man8/shorewall6-lite*
+fi
 
 echo "Shorewall6 Lite Uninstalled"

Shorewall6/Samples6/Universal/shorewall6.conf

@@ -159,7 +159,7 @@ INLINE_MATCHES=Yes
 
 IPSET_WARNINGS=Yes
 
-IP_FORWARDING=Off
+IP_FORWARDING=keep
 
 KEEP_RT_TABLES=Yes
 

Shorewall6/Samples6/one-interface/shorewall6.conf

@@ -160,7 +160,7 @@ INLINE_MATCHES=Yes
 
 IPSET_WARNINGS=Yes
 
-IP_FORWARDING=Off
+IP_FORWARDING=keep
 
 KEEP_RT_TABLES=Yes