Restore debian service file

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -169,13 +169,16 @@ else
     elif [ $vendor = default ]; then
 	params[HOST]=linux
 	vendor=linux
+    elif [[ $vendor == debian.* ]]; then
+	params[HOST]=debian
+	vendor=debian
     fi
 fi
 
 if [ $vendor = linux ]; then
     echo "INFO: Creating a generic Linux installation - " `date`;
 else
-    echo "INFO: Creating a $params[HOST]-specific installation - " `date`;
+    echo "INFO: Creating a ${params[HOST]}-specific installation - " `date`;
 fi
 
 echo

Shorewall-core/configure.pl

@@ -52,6 +52,9 @@ for ( @ARGV ) {
     $params{$pn} = $pv;
 }
 
+use File::Basename;
+chdir dirname($0);
+
 my $vendor = $params{HOST};
 my $rcfile;
 my $rcfilename;
@@ -83,8 +86,8 @@ unless ( defined $vendor ) {
 if ( defined $vendor ) {
     if ( $vendor eq 'debian' && -f '/etc/debian_version' ) {
 	if ( -l '/sbin/init' ) {
-	    if ( readlink '/sbin/init' =~ /systemd/ ) {
-		$rcfilename = 'debian.systemd';
+	    if ( readlink('/sbin/init') =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
 	    } else {
 		$rcfilename = 'shorewallrc.debian.sysvinit';
 	    }
@@ -99,13 +102,15 @@ if ( defined $vendor ) {
 	die qq("ERROR: $vendor" is not a recognized host type);
     } elsif ( $vendor eq 'default' ) {
 	$params{HOST} = $vendor = 'linux';
+    } elsif ( $vendor =~ /^debian\./ ) {
+	$params{HOST} = $vendor = 'debian';
     }
 } else {
     if ( -f '/etc/debian_version' ) {
 	$vendor = 'debian';
 	if ( -l '/sbin/init' ) {
-	    if ( readlink '/sbin/init' =~ /systemd/ ) {
-		$rcfilename = 'debian.systemd';
+	    if ( readlink( '/sbin/init' ) =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
 	    } else {
 		$rcfilename = 'shorewallrc.debian.sysvinit';
 	    }
@@ -168,7 +173,8 @@ my $outfile;
 
 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
 
-printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n#\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+print $outfile "# rc file: $rcfilename\n#\n";
 
 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;
 

Shorewall-core/install.sh

@@ -24,6 +24,9 @@
 
 VERSION=xxx #The Build script inserts the actual version
 
+PRODUCT=shorewall-core
+Product="Shorewall Core"
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
@@ -100,6 +103,9 @@ require()
     eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }
 
+#
+# Change to the directory containing this script
+#
 cd "$(dirname $0)"
 
 #
@@ -340,8 +346,10 @@ fi
 mkdir -p ${DESTDIR}${SBINDIR}
 chmod 755 ${DESTDIR}${SBINDIR}
 
-mkdir -p ${DESTDIR}${MANDIR}
-chmod 755 ${DESTDIR}${MANDIR}
+if [ -n "${MANDIR}" ]; then
+    mkdir -p ${DESTDIR}${MANDIR}
+    chmod 755 ${DESTDIR}${MANDIR}
+fi
 
 if [ -n "${INITFILE}" ]; then
     mkdir -p ${DESTDIR}${INITDIR}

Shorewall-core/lib.cli

@@ -25,7 +25,7 @@
 # loaded after this one and replaces some of the functions declared here.
 #
 
-SHOREWALL_CAPVERSION=40609
+SHOREWALL_CAPVERSION=50004
 
 [ -n "${g_program:=shorewall}" ]
 
@@ -2593,6 +2593,7 @@ determine_capabilities() {
     TARPIT_TARGET=
     IFACE_MATCH=
     TCPMSS_TARGET=
+    WAIT_OPTION=
 
     AMANDA_HELPER=
     FTP_HELPER=
@@ -2616,6 +2617,11 @@ determine_capabilities() {
 	qt $arptables -L OUT && ARPTABLESJF=Yes
     fi
 
+    if qt $g_tool --wait -t filter -L INPUT -n -v; then
+	WAIT_OPTION=Yes
+	tool="$tool --wait"
+    fi
+
     chain=fooX$$
 
     if [ -n "$NAT_ENABLED" ]; then
@@ -3074,8 +3080,10 @@ report_capabilities_unsorted() {
 
     if [ $g_family -eq 4 ]; then
 	report_capability "iptables -S (IPTABLES_S)" $IPTABLES_S
+	report_capability "iptables --wait option (WAIT_OPTION)" $WAIT_OPTION
     else
 	report_capability "ip6tables -S (IPTABLES_S)" $IPTABLES_S
+	report_capability "ip6tables --wait option (WAIT_OPTION)" $WAIT_OPTION
     fi
 
     report_capability "Basic Filter (BASIC_FILTER)" $BASIC_FILTER
@@ -3185,6 +3193,7 @@ report_capabilities_unsorted1() {
     report_capability1 TARPIT_TARGET
     report_capability1 IFACE_MATCH
     report_capability1 TCPMSS_TARGET
+    report_capability1 WAIT_OPTION
 
     report_capability1 AMANDA_HELPER
     report_capability1 FTP_HELPER

Shorewall-core/shorewallrc.openwrt

@@ -3,24 +3,21 @@
 #
 # Input: host=openwrt
 #
-HOST=openwrt
-PREFIX=/usr                             
-SHAREDIR=${PREFIX}/share                
-LIBEXECDIR=${PREFIX}/share              
-PERLLIBDIR=${PREFIX}/share/shorewall    
-CONFDIR=/etc                            
-SBINDIR=/sbin                           
-MANDIR=${PREFIX}/man                    
-INITDIR=/etc/init.d                     
-INITSOURCE=init.openwrt.sh
-INITFILE=$PRODUCT                       
-AUXINITSOURCE=
-AUXINITFILE=
-SERVICEDIR=                             
-SERVICEFILE=                            
-SYSCONFFILE=default.openwrt
-SYSCONFDIR=${CONFDIR}/sysconfig
-SPARSE=                                 
-ANNOTATED=                              
-VARLIB=/lib
-VARDIR=${VARLIB}/$PRODUCT               
+PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall    #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                            #Directory where subsystem configurations are installed
+SBINDIR=/sbin                           #Directory where system administration programs are installed
+MANDIR=                                 #Directory where manpages are installed.
+INITDIR=/etc/init.d                     #Directory where SysV init scripts are installed.
+INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITSOURCE=init.openwrt.sh              #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                              #If non-zero, annotated configuration files are installed
+SYSCONFDIR=${CONFDIR}/sysconfig         #Directory where SysV init parameter files are installed
+SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
+SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/lib                             #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.

Shorewall-core/uninstall.sh

@@ -27,7 +27,9 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx #The Build script inserts the actual version
-
+PRODUCT="shorewall-core"
+Product="Shorewall Core"
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
@@ -66,6 +68,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 #
 # Read the RC file
 #

Shorewall-init/init.openwrt.sh

@@ -0,0 +1,131 @@
+#!/bin/sh /etc/rc.common
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#
+#     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)
+#
+#       On most distributions, this file should be called /etc/init.d/shorewall-init.
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+#
+
+# arg1 of init script is arg2 when rc.common is sourced
+
+case "$action" in
+  start|stop|boot)
+      if [ "$(id -u)" != "0" ]
+      then
+	  echo "You must be root to start, stop or restart \"Shorewall \"."
+	  exit 1
+      fi
+
+      # check if shorewall-init is configured or not
+      if [ -f "/etc/sysconfig/shorewall-init" ]
+      then
+	  . /etc/sysconfig/shorewall-init
+	  if [ -z "$PRODUCTS" ]
+	  then
+	      exit 0
+	  fi
+      else
+	  exit 0
+      fi
+
+      ;;
+  enable|disable|enabled)
+      # Openwrt related
+      # start and stop runlevel variable
+      START=19
+      STOP=91
+      ;;
+  *)
+      echo "Usage: /etc/init.d/shorewall-init {start|stop}"
+      exit 1
+esac
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+# Locate the current PRODUCT's statedir
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . ${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
+    else
+	return 0
+    fi
+}
+
+# Initialize the firewall
+start () {
+    local PRODUCT
+  local STATEDIR
+
+  echo -n "Initializing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
+	  fi
+      fi
+  done
+
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+      ipset -R < "$SAVE_IPSETS"
+  fi
+}
+
+boot () {
+    start
+}
+
+# Clear the firewall
+stop () {
+    local PRODUCT
+    local STATEDIR
+
+    echo -n "Clearing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
+	fi
+    done
+
+    if [ -n "$SAVE_IPSETS" ]; then
+	mkdir -p $(dirname "$SAVE_IPSETS")
+	if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	fi
+    fi
+}
+

Shorewall-init/install.sh

@@ -28,6 +28,8 @@
 #
 
 VERSION=xxx #The Build script inserts the actual version.
+PRODUCT=shorewall-init
+Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
@@ -71,39 +73,50 @@ mywhich() {
     return 2
 }
 
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
 cant_autostart()
 {
     echo
     echo  "WARNING: Unable to configure shorewall init to start automatically at boot" >&2
 }
 
+install_file() # $1 = source $2 = target $3 = mode
+{
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
+}
+
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 0755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+}
+
 require() 
 {
     eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }
 
-install_file() # $1 = source $2 = target $3 = mode
-{
-    run_install $T $OWNERSHIP -m $3 $1 ${2}
-}
-
+#
+# Change to the directory containing this script
+#
 cd "$(dirname $0)"
 
-PRODUCT=shorewall-init
-
 #
 # Parse the run line
 #
-T='-T'
 
 finished=0
 configure=1
@@ -230,6 +243,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=slackware
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ]; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -237,22 +252,24 @@ if [ -z "$BUILD" ]; then
     esac
 fi
 
-[ -n "$OWNER" ] || OWNER=$(id -un)
-[ -n "$GROUP" ] || GROUP=$(id -gn)
-
 case $BUILD in
     apple)
-	T=
-	;;
-    debian|gentoo|redhat|suse|slackware|archlinux)
+	[ -z "$OWNER" ] && OWNER=root
+	[ -z "$GROUP" ] && GROUP=wheel
 	;;
+    cygwin*|CYGWIN*)
+	OWNER=$(id -un)
+	GROUP=$(id -gn)
+ 	;;
     *)
-	[ -n "$BUILD" ] && echo "ERROR: Unknown BUILD environment ($BUILD)" >&2 || echo "ERROR: Unknown BUILD environment"
-	exit 1
+	if [ $(id -u) -eq 0 ]; then
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
 	;;
 esac
 
-OWNERSHIP="-o $OWNER -g $GROUP"
+[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
 
 [ -n "$HOST" ] || HOST=$BUILD
 
@@ -277,6 +294,9 @@ case "$HOST" in
     suse)
 	echo "Installing SuSE-specific configuration..."
 	;;
+    openwrt)
+	echo "Installing Openwrt-specific configuration..."
+	;;
     linux)
 	echo "ERROR: Shorewall-init is not supported on this system" >&2
 	exit 1
@@ -290,12 +310,12 @@ esac
 [ -z "$TARGET" ] && TARGET=$HOST
 
 if [ -n "$DESTDIR" ]; then
-    if [ `id -u` != 0 ] ; then
+    if [ $(id -u) != 0 ] ; then
 	echo "Not setting file owner/group permissions, not running as root."
 	OWNERSHIP=""
     fi
     
-    install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
+    make_directory ${DESTDIR}${INITDIR} 0755
 fi
 
 echo "Installing Shorewall Init Version $VERSION"
@@ -311,7 +331,7 @@ fi
 
 if [ -n "$DESTDIR" ]; then
     mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
-    chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 0755 ${DESTDIR}${CONFDIR}/logrotate.d
 fi
 
 #
@@ -339,14 +359,14 @@ fi
 if [ -n "$SERVICEDIR" ]; then
     mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
     if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${SBINDIR}
-        chmod 755 ${DESTDIR}${SBINDIR}
+        chmod 0755 ${DESTDIR}${SBINDIR}
     fi
-    run_install $OWNERSHIP -m 700 shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init
+    install_file shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init 0700
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall-init
     echo "CLI installed as ${DESTDIR}${SBINDIR}/shorewall-init"
 fi
@@ -355,13 +375,13 @@ fi
 # Create /usr/share/shorewall-init if needed
 #
 mkdir -p ${DESTDIR}${SHAREDIR}/shorewall-init
-chmod 755 ${DESTDIR}${SHAREDIR}/shorewall-init
+chmod 0755 ${DESTDIR}${SHAREDIR}/shorewall-init
 
 #
 # Install logrotate file
 #
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -369,7 +389,7 @@ fi
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/shorewall-init/version
-chmod 644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
+chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
 
 #
 # Remove and create the symbolic link to the init script
@@ -397,6 +417,7 @@ if [ $HOST = debian ]; then
 
 	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
 	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
+	echo "sysconfig file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     IFUPDOWN=ifupdown.debian.sh
@@ -411,6 +432,9 @@ else
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
+	    elif [ $HOST = openwrt ]; then
+		# Not implemented on openwrt
+		/bin/true
 	    else
 		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
 	    fi
@@ -418,8 +442,8 @@ else
     fi
 
     if [ -n "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
-	run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT
-	echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+	install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT 0644
+	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     [ $HOST = suse ] && IFUPDOWN=ifupdown.suse.sh || IFUPDOWN=ifupdown.fedora.sh
@@ -429,13 +453,15 @@ fi
 # Install the ifupdown script
 #
 
-cp $IFUPDOWN ifupdown
+if [ $HOST != openwrt ]; then
+    cp $IFUPDOWN ifupdown
 
-[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
+    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
 
-mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
+    mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 
-install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
+    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
+fi
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
     [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
@@ -488,11 +514,11 @@ case $HOST in
 esac
 
 if [ -z "$DESTDIR" ]; then
-    if [ $configure -eq 1 -a -n "$first_install" ]; then
+    if [ $configure -eq 1 -a -n "first_install" ]; then
 	if [ $HOST = debian ]; then
 	    if [ -n "$SERVICEDIR" ]; then
 		if systemctl enable ${PRODUCT}.service; then
-		    echo "Shorewall INit will start automatically at boot"
+                    echo "Shorewall Init will start automatically at boot"
 		fi
 	    elif mywhich insserv; then
 		if insserv ${INITDIR}/shorewall-init; then
@@ -510,6 +536,13 @@ if [ -z "$DESTDIR" ]; then
 	    else
 		cant_autostart
 	    fi
+	elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+	    /etc/init.d/$PRODUCT enable
+	    if /etc/init.d/$PRODUCT enabled; then
+		echo "$Product will start automatically at boot"
+	    else
+		cant_autostart
+	    fi
 	elif [ $HOST = gentoo ]; then
 	    # On Gentoo, a service must be enabled manually by the user,
 	    # not by the installer
@@ -538,6 +571,13 @@ if [ -z "$DESTDIR" ]; then
 		else
 		    cant_autostart
 		fi
+	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+		/etc/init.d/shorewall-inir enable
+		if /etc/init.d/shorewall-init enabled; then
+		    echo "Shorrewall Init will start automatically at boot"
+		else
+		    cant_autostart
+		fi
 	    else
 		cant_autostart
 	    fi
@@ -558,7 +598,7 @@ fi
 
 [ -z "${DESTDIR}" ] && [ ! -f ~/.shorewallrc ] && cp ${SHAREDIR}/shorewall/shorewallrc .
 
-if [ -f ${DESTDIR}/etc/ppp ]; then
+if [ -d ${DESTDIR}/etc/ppp ]; then
     case $HOST in
 	debian|suse)
 	    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do

Shorewall-init/shorewall-init.service

@@ -5,7 +5,8 @@
 #
 [Unit]
 Description=Shorewall firewall (bootup security)
-Before=network.target
+Before=network-pre.target
+Wants=network-pre.target
 
 [Service]
 Type=oneshot

Shorewall-init/shorewall-init.service.214

@@ -1,20 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network-pre.target
-Wants=network-pre.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target

Shorewall-init/shorewall-init.service.214.debian

@@ -1,21 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network-pre.target
-Wants=network-pre.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/default/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target

Shorewall-init/uninstall.sh

@@ -27,6 +27,8 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx  #The Build script inserts the actual version
+PRODUCT=shorewall-init
+Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
@@ -75,6 +77,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 finished=0
 configure=1
 
@@ -162,7 +169,11 @@ INITSCRIPT=${CONFDIR}/init.d/shorewall-init
 
 if [ -f "$INITSCRIPT" ]; then
     if [ $configure -eq 1 ]; then
-	if mywhich updaterc.d ; then
+	if [ $HOST = openwrt ]; then
+	    if /etc/init.d/shorewall-init enabled; then
+		/etc/init.d/shorewall-init disable
+	    fi
+	elif mywhich updaterc.d ; then
 	    updaterc.d shorewall-init remove
 	elif mywhich insserv ; then
             insserv -r $INITSCRIPT
@@ -174,13 +185,22 @@ if [ -f "$INITSCRIPT" ]; then
     remove_file $INITSCRIPT
 fi
 
-if [ -n "$SYSTEMD" ]; then
-    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
-    rm -f $SYSTEMD/shorewall-init.service
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
 fi
 
-[ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
-[ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+if [ -n "$SERVICEDIR" ]; then
+    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
+    rm -f $SERVICEDIR/shorewall-init.service
+fi
+
+if [ $HOST = openwrt ]; then
+    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+else
+    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+fi
 
 remove_file ${CONFDIR}/default/shorewall-init
 remove_file ${CONFDIR}/sysconfig/shorewall-init
@@ -194,16 +214,16 @@ remove_file ${CONFDIR}/network/if-post-down.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-up.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-down.d/shorewall
 
-[ -n "$SYSTEMD" ] && remove_file ${SYSTEMD}/shorewall.service
-
 if [ -d ${CONFDIR}/ppp ]; then
     for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
 	remove_file ${CONFDIR}/ppp/$directory/shorewall
     done
 
     for file in if-up.local if-down.local; do
-	if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
-	    remove_file ${CONFDIR}/ppp/$FILE
+	if [ -f ${CONFDIR}/ppp/$file ]; then
+	    if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
+		remove_file ${CONFDIR}/ppp/$FILE
+	    fi
 	fi
     done
 fi

Shorewall-lite/init.openwrt.sh

@@ -32,38 +32,37 @@
 #	   shorewall-lite start			  Starts the firewall
 #	   shorewall-lite restart		  Restarts the firewall
 #	   shorewall-lite reload		  Reload the firewall
-#						  (same as restart)
 #	   shorewall-lite stop			  Stops the firewall
 #	   shorewall-lite status		  Displays firewall status
 #
 
 # description: Packet filtering firewall
 
-# openwrt stuph
+# Product name variable
+PRODUCT=shorewall-lite
++
+# Openwrt related
 # start and stop runlevel variable
-#START=21
-#STOP=91
+START=50
+STOP=89
 # variable to display what the status command do when /etc/init.d/shorewall-lite is invoke without argument
 EXTRA_COMMANDS="status"
-EXTRA_HELP="Displays shorewall status"
+EXTRA_HELP="status displays shorewall status"
 
 ################################################################################
 # Get startup options (override default)
 ################################################################################
-OPTIONS="-vvv"
+OPTIONS=
 
 #
 # The installer may alter this
 #
 . /usr/share/shorewall/shorewallrc
 
-if [ -f ${SYSCONFDIR}/shorewall-lite ]; then
-    . ${SYSCONFDIR}/shorewall-lite
+if [ -f ${SYSCONFDIR}/$PRODUCT ]; then
+    . ${SYSCONFDIR}/$PRODUCT
 fi
 
-START=${START:-21}
-STOP=${STOP:-91}
-
 SHOREWALL_INIT_SCRIPT=1
 
 ################################################################################
@@ -73,7 +72,7 @@ SHOREWALL_INIT_SCRIPT=1
 command="$action"
 
 start() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${STARTOPTIONS:-$@}
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STARTOPTIONS
 }
 
 boot() {
@@ -82,17 +81,17 @@ start
 }
 
 restart() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${RESTARTOPTIONS:-$@}
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RESTARTOPTIONS
 }
 
 reload() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${RELOADOPTION:-$@}
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RELOADOPTION
 }
 
 stop() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${STOPOPTIONS:-$@}
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STOPOPTIONS
 }
 
 status() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${STATUSOPTIONS:-$@}
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STATUSOPTIONS
 }

Shorewall-lite/shorewall-lite.service.214

@@ -1,21 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv4 firewall (lite)
-Wants=network-online.target
-After=network-online.target
-Conflicts=iptables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall-lite
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall-lite $OPTIONS stop
-
-[Install]
-WantedBy=basic.target

Shorewall-lite/uninstall.sh

@@ -28,6 +28,7 @@
 
 VERSION=xxx  #The Build script inserts the actual version
 PRODUCT=shorewall-lite
+Product="Shorewall Lite"
 
 usage() # $1 = exit status
 {
@@ -153,7 +154,7 @@ if [ -f ${SHAREDIR}/shorewall-lite/version ]; then
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: Shorewal Lite Version $VERSION is not installed"
+    echo "WARNING: Shorewall Lite Version $VERSION is not installed"
     VERSION=""
 fi
 
@@ -205,14 +206,16 @@ fi
 rm -f ${SBINDIR}/shorewall-lite
 
 rm -rf ${CONFDIR}/shorewall-lite
-rm -rf ${VARDIR}/shorewall-lite
+rm -rf ${VARDIR}
 rm -rf ${SHAREDIR}/shorewall-lite
 rm -rf ${LIBEXECDIR}/shorewall-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
 rm -f  ${SYSCONFDIR}/shorewall-lite
 
-rm -f ${MANDIR}/man5/shorewall-lite*
-rm -f ${MANDIR}/man8/shorewall-lite*
+if [ -n "${MANDIR}" ]; then
+    rm -f ${MANDIR}/man5/shorewall-lite*
+    rm -f ${MANDIR}/man8/shorewall-lite*
+fi
 
 echo "Shorewall Lite Uninstalled"
 

Shorewall/Perl/Shorewall/Accounting.pm

@@ -291,7 +291,8 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 			    '' ,
 			    $target ,
 			    '' ,
-			    $disposition ,
+		            $disposition ,
+		            '' ,
 			    ''  );
 	    }
 	}
@@ -386,6 +387,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 	$target ,
 	'' ,
 	$disposition ,
+	'' ,
 	'' ;
 
     if ( $rule2 || $jump ) {
@@ -414,7 +416,8 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 		    '' ,
 		    '' ,
 		    '' ,
-		    '' ,
+	            '' ,
+	            '' ,
 		    '' );
     }
 

Shorewall/Perl/Shorewall/Chains.pm

@@ -6242,7 +6242,7 @@ sub log_rule_limit( $$$$$$$$ ) {
 		if ( $tag =~ /^,/ ) {
 		    ( $disposition = $tag ) =~ s/,//;
 		} elsif ( $tag =~ /,/ ) {
-		    ( $chain, $disposition ) = split ',', $tag;
+		    ( $chain, $disposition ) = split ',', $tag, 2;
 		} else { 
 		    $chain = $tag;
 		}
@@ -6336,7 +6336,7 @@ sub log_irule_limit( $$$$$$$@ ) {
 		if ( $tag =~ /^,/ ) {
 		    ( $disposition = $tag ) =~ s/,//;
 		} elsif ( $tag =~ /,/ ) {
-		    ( $chain, $disposition ) = split ',', $tag;
+		    ( $chain, $disposition ) = split ',', $tag, 2;
 		} else { 
 		    $chain = $tag;
 		}
@@ -6562,6 +6562,8 @@ sub set_chain_variables() {
 	emit( 'g_tool=$IP6TABLES' );
     }
 
+    emit 'g_tool="$g_tool --wait"' if have_capability 'WAIT_OPTION';
+
     if ( $config{IP} ) {
 	emit( qq(IP="$config{IP}") ,
 	      '[ -x "$IP" ] || startup_error "IP=$IP does not exist or is not executable"'
@@ -7031,7 +7033,7 @@ sub isolate_source_interface( $ ) {
 	    $inets  = $2;
 	} elsif ( $source =~ /^(.+?):\[(.+)\]\s*$/ ||
 		  $source =~ /^(.+?):(!?\+.+)$/    ||
-		  $source =~ /^(.+?):(!?[&%].+)$/  ||
+		  $source =~ /^(.+?):(!?[&%~].+)$/ ||
 		  $source =~ /^(.+?):(\[.+\]\/(?:\d+))\s*$/
 		) {
 	    $iiface = $1;
@@ -7428,7 +7430,7 @@ sub handle_exclusion( $$$$$$$$$$$$$$$$$$$$$ ) {
 #
 # Returns the destination interface specified in the rule, if any.
 #
-sub expand_rule( $$$$$$$$$$$;$ )
+sub expand_rule( $$$$$$$$$$$$;$ )
 {
     my ($chainref ,    # Chain
 	$restriction,  # Determines what to do with interface names in the SOURCE or DEST
@@ -7441,6 +7443,7 @@ sub expand_rule( $$$$$$$$$$$;$ )
 	$loglevel ,    # Log level (and tag)
 	$disposition,  # Primtive part of the target (RETURN, ACCEPT, ...)
 	$exceptionrule,# Caller's matches used in exclusion case
+	$usergenerated,# Rule came from the IP[6]TABLES target
 	$logname,      # Name of chain to name in log messages
        ) = @_;
 
@@ -7490,7 +7493,7 @@ sub expand_rule( $$$$$$$$$$$;$ )
 	    $loglevel = validate_level( $loglevel );
 	    $logtag   = '' unless defined $logtag;
 	}
-    } elsif ( $disposition eq 'LOG' ) {
+    } elsif ( $disposition eq 'LOG' && ! $usergenerated ) {
 	fatal_error "LOG requires a level";
     }
     #
@@ -7605,9 +7608,9 @@ sub expand_rule( $$$$$$$$$$$;$ )
 
 		    my $cond3 = conditional_rule( $chainref, $dnet );
 
-		    if ( $loglevel eq '' ) {
+		    if ( $loglevel eq '' || $usergenerated ) {
 			#
-			# No logging -- add the target rule with matches to the rule chain
+			# No logging or user-specified logging -- add the target rule with matches to the rule chain
 			#
 			if ( $targetref ) {
 			    add_expanded_jump( $chainref, $targetref , 0, $matches );

Shorewall/Perl/Shorewall/Config.pm

@@ -396,6 +396,7 @@ our %capdesc = ( NAT_ENABLED     => 'NAT',
 		 TARPIT_TARGET   => 'TARPIT Target',
 		 IFACE_MATCH     => 'Iface Match',
                  TCPMSS_TARGET   => 'TCPMSS Target',
+                 WAIT_OPTION     => 'iptables --wait option',
 
 		 AMANDA_HELPER   => 'Amanda Helper',
 		 FTP_HELPER      => 'FTP Helper',
@@ -714,7 +715,7 @@ sub initialize( $;$$) {
 		    EXPORT                  => 0,
 		    KLUDGEFREE              => '',
 		    VERSION                 => "5.0.1",
-		    CAPVERSION              => 40609 ,
+		    CAPVERSION              => 50004 ,
 		    BLACKLIST_LOG_TAG       => '',
 		    RELATED_LOG_TAG         => '',
 		    MACLIST_LOG_TAG         => '',
@@ -989,6 +990,7 @@ sub initialize( $;$$) {
 	       TARPIT_TARGET => undef,
 	       IFACE_MATCH => undef,
 	       TCPMSS_TARGET => undef,
+	       WAIT_OPTION => undef,
 
 	       AMANDA_HELPER => undef,
 	       FTP_HELPER => undef,
@@ -2212,7 +2214,10 @@ sub split_line2( $$;$$$ ) {
 	$pairs = '';
     }
 
-    fatal_error "Shorewall Configuration file entries may not contain double quotes, single back quotes or backslashes" if $columns =~ /["`\\]/;
+    unless ( $currline =~ /^\s*IP6?TABLES\(.*\)/ ) {
+	fatal_error "Shorewall Configuration file entries may not contain double quotes, single back quotes or backslashes" if $columns =~ /["`\\]/;
+    }
+
     fatal_error "Non-ASCII gunk in file" if $columns =~ /[^\s[:print:]]/;
 
     my @line = split_columns( $columns );
@@ -2245,7 +2250,7 @@ sub split_line2( $$;$$$ ) {
 
 	for ( @pairs ) {
 	    fatal_error "Invalid column/value pair ($_)" unless /^(\w+)(?:=>?|:)(.+)$/;
-	    my ( $column, $value ) = ( lc $1, $2 );
+	    my ( $column, $value ) = ( lc( $1 ), $2 );
 	    fatal_error "Unknown column ($1)" unless exists $columnsref->{$column};
 	    $column = $columnsref->{$column};
 	    fatal_error "Non-ASCII gunk in file" if $columns =~ /[^\s[:print:]]/;
@@ -3963,7 +3968,7 @@ sub Udpliteredirect() {
 
 sub Mangle_Enabled() {
     if ( qt1( "$iptables $iptablesw -t mangle -L -n" ) ) {
-	system( "$iptables -t mangle -N $sillyname" ) == 0 || fatal_error "Cannot Create Mangle chain $sillyname";
+	system( "$iptables $iptablesw -t mangle -N $sillyname" ) == 0 || fatal_error "Cannot Create Mangle chain $sillyname";
     }
 }
 
@@ -4605,7 +4610,8 @@ sub determine_capabilities() {
 
     my $pid     = $$;
 
-    $capabilities{CAPVERSION} = $globals{CAPVERSION};
+    $capabilities{CAPVERSION}  = $globals{CAPVERSION};
+    $capabilities{WAIT_OPTION} = $iptablesw;
 
     determine_kernelversion;
 
@@ -5083,6 +5089,8 @@ sub read_capabilities() {
 
     $globals{KLUDGEFREE} = $capabilities{KLUDGEFREE};
 
+    $iptablesw = '-w' if $capabilities{WAIT_OPTION};
+
 }
 
 #

Shorewall/Perl/Shorewall/Misc.pm

@@ -614,7 +614,8 @@ sub process_stoppedrules() {
 				 $target,
 				 '',
 				 $disposition,
-				 do_proto( $proto, '-', '-' ) );
+				 do_proto( $proto, '-', '-' ),
+				 '');
 		}
 	    } else {
 		warning_message "Redundant OUTPUT rule ignored because ADMINISABSENTMINDED=Yes";

Shorewall/Perl/Shorewall/Nat.pm

@@ -345,7 +345,8 @@ sub process_one_masq1( $$$$$$$$$$$ )
 		     $target ,
 		     '' ,
 		     '' ,
-		     $exceptionrule )
+		     $exceptionrule ,
+		     '' )
 	    unless unreachable_warning( 0, $chainref );
 
 	conditional_rule_end( $chainref ) if $detectaddress || $conditional;
@@ -795,7 +796,8 @@ sub handle_nat_rule( $$$$$$$$$$$$$ ) {
 		  $target ,
 		  $loglevel ,
 		  $log_action ,
-		  $serverport ? do_proto( $proto, '', '' ) : '',
+		  $serverport ? do_proto( $proto, '', '' ) : '' ,
+		  '' ,
 		)
 	unless unreachable_warning( $wildcard, $chainref );
 
@@ -867,6 +869,7 @@ sub handle_nonat_rule( $$$$$$$$$$$ ) {
 			 $loglevel,
 			 $log_action,
 			 '',
+			 '',
 			 dnat_chain( $sourcezone  ) )
 		unless unreachable_warning( $wildcard, $chn );
 
@@ -888,6 +891,7 @@ sub handle_nonat_rule( $$$$$$$$$$$ ) {
 		 $loglevel ,
 		 $log_action ,
 		 '',
+		 '',
 	       )
 	unless unreachable_warning( $wildcard, $nonat_chain );
 }

Shorewall/Perl/Shorewall/Raw.pm

@@ -98,6 +98,8 @@ sub process_conntrack_rule( $$$$$$$$$$ ) {
 	$action = join( ":" , 'LOG', $action );
     }
 
+    my $usergenerated;
+
     if ( $action eq 'NOTRACK' ) {
 	#
 	# A patch that deimplements the NOTRACK target has been posted on the
@@ -204,7 +206,8 @@ sub process_conntrack_rule( $$$$$$$$$$ ) {
 		 $action ,
 		 $level || '' ,
 		 $disposition ,
-		 $exception_rule );
+		 $exception_rule ,
+		 $usergenerated && ! $level );
 
     progress_message "  Conntrack rule \"$currentline\" $done";
 }
@@ -247,6 +250,7 @@ sub handle_helper_rule( $$$$$$$$$$$ ) {
 			 $action_target ,
 			 '',
 			 'CT' ,
+			 '' ,
 			 '' );
 	} else {
 	    expand_rule( ensure_raw_chain( notrack_chain( $sourceref->{name} ) ) ,
@@ -261,6 +265,7 @@ sub handle_helper_rule( $$$$$$$$$$$ ) {
 			 $action_target ,
 			 '' ,
 			 'CT' ,
+			 '' ,
 			 '' );
 	}
     }

Shorewall/Perl/Shorewall/Rules.pm

@@ -2264,6 +2264,7 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
     my $matches     = $rule;
     my $raw_matches = '';
     my $exceptionrule = '';
+    my $usergenerated;
 
     if ( $inchain = defined $chainref ) {
 	( $inaction, undef, undef, undef ) = split /:/, $normalized_action = $chainref->{action}, 4 if $chainref->{action};
@@ -2287,6 +2288,8 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 
     fatal_error "Unknown ACTION ($action)" unless $actiontype;
 
+    $usergenerated = $actiontype & IPTABLES;
+
     if ( $actiontype == MACRO ) {
 	#
 	# process_macro() will call process_rule() recursively for each rule in the macro body
@@ -2333,15 +2336,16 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	$param = $param eq '' ? 'drop' : $param;
 	fatal_error "Invalid AUDIT type ($param) -- must be 'accept', 'drop' or 'reject'" unless $param =~ /^(?:accept|drop|reject)$/;
 	$actiontype = STANDARD;
-    } elsif ( $actiontype & NFLOG ) {
-	validate_level( $action );
-	$loglevel = supplied $loglevel ? join( ':', $action, $loglevel ) : $action;
-	$action   = 'LOG';
-    } elsif ( ! ( $actiontype & (ACTION | INLINE | IPTABLES | TARPIT ) ) ) {
-	fatal_error "'builtin' actions may only be used in INLINE rules" if $actiontype == USERBUILTIN;
-	fatal_error "The $basictarget TARGET does not accept a parameter" unless $param eq '';
+    } elsif ( ! $usergenerated ) {
+	if ( $actiontype & NFLOG ) {
+	    validate_level( $action );
+	    $loglevel = supplied $loglevel ? join( ':', $action, $loglevel ) : $action;
+	    $action   = 'LOG';
+	} elsif ( ! ( $actiontype & (ACTION | INLINE | IPTABLES | TARPIT ) ) ) {
+	    fatal_error "'builtin' actions may only be used in INLINE rules" if $actiontype == USERBUILTIN;
+	    fatal_error "The $basictarget TARGET does not accept a parameter" unless $param eq '';
+	}
     }
-
     #
     # We can now dispense with the postfix character
     #
@@ -2477,13 +2481,21 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 	    $actiontype |= HELPER;
 	} elsif ( $actiontype & SET ) {
 	    my %xlate = ( ADD => 'add-set' , DEL => 'del-set' );
+	    my ( $setname, $flags, $timeout, $rest ) = split ':', $param, 4;
 
-	    my ( $setname, $flags, $rest ) = split ':', $param, 3;
 	    fatal_error "Invalid ADD/DEL parameter ($param)" if $rest;
 	    $setname =~ s/^\+//;
 	    fatal_error "Expected ipset name ($setname)" unless $setname =~ /^(6_)?[a-zA-Z][-\w]*$/;
-	    fatal_error "Invalid flags ($flags)" unless defined $flags && $flags =~ /^(dst|src)(,(dst|src)){0,5}$/;
+	    fatal_error "Invalid flags ($flags)"         unless defined $flags && $flags =~ /^(dst|src)(,(dst|src)){0,5}$/;
+
 	    $action = join( ' ', 'SET --' . $xlate{$basictarget} , $setname , $flags );
+
+	    if ( supplied $timeout ) {
+		fatal_error "A timeout may only be supplied in an ADD rule" unless $basictarget eq 'ADD';
+		fatal_error "Invalid Timeout ($timeout)"                    unless $timeout && $timeout =~ /^\d+$/;
+
+		$action .= " --timeout $timeout";
+	    }
 	}
     }
     #
@@ -2901,7 +2913,8 @@ sub process_rule ( $$$$$$$$$$$$$$$$$$$$ ) {
 		     $action ,
 		     $loglevel ,
 		     $log_action ,
-		     $exceptionrule )
+		     $exceptionrule ,
+		     $usergenerated && ! $loglevel )
 	    unless unreachable_warning( $wildcard || $section == DEFAULTACTION_SECTION, $chainref );
     }
 

Shorewall/Perl/Shorewall/Tc.pm

@@ -227,6 +227,7 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
     our $designator;
     our $ttl            = 0;
     my $fw              = firewall_zone;
+    my $usergenerated;
 
     sub handle_mark_param( $$ ) {
 	my ( $option, $marktype ) = @_;
@@ -290,7 +291,8 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 			     "$target $option " . join( '/', in_hex( $markval ) , $mask ) ,
 			     '',
 			     $target ,
-			     $exceptionrule );
+			     $exceptionrule ,
+			     ''  );
 	    }
 
 	    $done = 1;
@@ -452,6 +454,16 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 	    },
 	},
 
+	DROP       => {
+	    defaultchain   => 0,
+	    allowedchains  => PREROUTING | FORWARD | OUTPUT | POSTROUTING,
+	    minparams      => 0,
+	    maxparams      => 0,
+	    function       => sub() {
+		$target = 'DROP';
+	    }
+	},
+
 	DSCP       => {
 	    defaultchain   => 0,
 	    allowedchains  => PREROUTING | FORWARD | OUTPUT | POSTROUTING,
@@ -524,7 +536,8 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 		my $target_type = $builtin_target{$tgt};
 		fatal_error "Unknown target ($tgt)" unless $target_type;
 		fatal_error "The $tgt TARGET is not allowed in the mangle table" unless $target_type & MANGLE_TABLE;
-		$target = $params;
+		$target        = $params;
+		$usergenerated = 1;
 	    },
 	},
 
@@ -539,7 +552,8 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 		my $target_type = $builtin_target{$tgt};
 		fatal_error "Unknown target ($tgt)" unless $target_type;
 		fatal_error "The $tgt TARGET is not allowed in the mangle table" unless $target_type & MANGLE_TABLE;
-		$target = $params;
+		$target        = $params;
+		$usergenerated = 1;
 	    },
 	},
 
@@ -850,7 +864,8 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$ ) {
 					 $target,
 					 '' ,
 					 $target ,
-					 $exceptionrule ) )
+					 $exceptionrule ,
+					 $usergenerated ) )
 	     && $device ) {
 	    #
 	    # expand_rule() returns destination device if any
@@ -3118,6 +3133,7 @@ sub process_secmark_rule1( $$$$$$$$$ ) {
 		 $target ,
 		 '' ,
 		 $disposition,
+		 '' ,
 		 '' );
 
     progress_message "Secmarks rule \"$currentline\" $done";

Shorewall/configfiles/masq

@@ -6,5 +6,5 @@
 # The manpage is also online at
 # http://www.shorewall.net/manpages/shorewall-masq.html
 #
-######################################################################################################
-#INTERFACE		SOURCE		ADDRESS		PROTO	PORT	IPSEC	MARK	USER	SWITCH
+###################################################################################################################################
+#INTERFACE		SOURCE		ADDRESS		PROTO	PORT	IPSEC	MARK	USER	SWITCH	ORIGDEST	PROBABILITY

Shorewall/manpages/shorewall-rules.xml

@@ -241,7 +241,7 @@
 
             <varlistentry>
               <term><emphasis
-              role="bold">ADD(<replaceable>ipset</replaceable>:<replaceable>flags</replaceable>)</emphasis></term>
+              role="bold">ADD(<replaceable>ipset</replaceable>:<replaceable>flags</replaceable>[:<replaceable>timeout</replaceable>])</emphasis></term>
 
               <listitem>
                 <para>Added in Shorewall 4.4.12. Causes addresses and/or port
@@ -256,6 +256,12 @@
                 role="bold">dst</emphasis> respectively (see the -A command in
                 ipset (8)).</para>
 
+                <para>Beginning with Shorewall 5.0.3, an optional
+                <replaceable>timeout</replaceable> can be specified. This is
+                the number of seconds that the new entry in the ipset is to
+                remain valid and overrides any timeout specified when the
+                ipset was created.</para>
+
                 <para>ADD is non-terminating. Even if a packet matches the
                 rule, it is passed on to the next rule.</para>
               </listitem>

Shorewall/shorewall.service.214

@@ -1,22 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv4 firewall
-Wants=network-online.target
-After=network-online.target
-Conflicts=iptables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall
-StandardOutput=syslog
-ExecStart=/sbin/shorewall $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall $OPTIONS stop
-ExecReload=/sbin/shorewall $OPTIONS reload $RELOADOPTIONS
-
-[Install]
-WantedBy=basic.target

Shorewall/uninstall.sh

@@ -80,6 +80,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 finished=0
 configure=1
 
@@ -168,8 +173,8 @@ fi
 
 rm -f ${SBINDIR}/shorewall
 
-if [ -L ${SHAREDIR}/shorewall6/init ]; then
-    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall6/init)
+if [ -L ${SHAREDIR}/shorewall/init ]; then
+    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall/init)
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
 fi
@@ -188,17 +193,19 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-if [ -n "$SYSTEMD" ]; then
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+if [ -n "$SERVICEDIR" ]; then
     [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
-    rm -f $SYSTEMD/shorewall.service
+    rm -f $SERVICEDIR/shorewall.service
 fi
 
 rm -rf ${SHAREDIR}/shorewall/version
 rm -rf ${CONFDIR}/shorewall
 
 if [ -n "$SYSCONFDIR" ]; then
-    [ -n "$SYSCONFFILE" ] || SYSCONFFILE=${PRODUCT};
-    rm -f ${SYSCONFDIR}/${SYSCONFFILE}
+    [ -n "$SYSCONFFILE" ] && rm -f ${SYSCONFDIR}/${PRODUCT}
 fi
 
 rm -rf ${VARDIR}/shorewall

Shorewall6-lite/init.openwrt.sh

@@ -41,29 +41,26 @@
 
 # openwrt stuph
 # start and stop runlevel variable
-#START=21
-#STOP=91
+START=50
+STOP=89
 # variable to display what the status command do when /etc/init.d/shorewall6-lite is invoke without argument
 EXTRA_COMMANDS="status"
-EXTRA_HELP="Displays shorewall status"
+EXTRA_HELP="status displays shorewall status"
 
 ################################################################################
 # Get startup options (override default)
 ################################################################################
-OPTIONS="-vvv"
+OPTIONS=
 
 #
 # The installer may alter this
 #
 . /usr/share/shorewall/shorewallrc
 
-if [ -f ${SYSCONFDIR}/shorewall6-lite ]; then
-    . ${SYSCONFDIR}/shorewall6-lite
+if [ -f ${SYSCONFDIR}/$PRODUCT ]; then
+    . ${SYSCONFDIR}/$PRODUCT
 fi
 
-START=${START:-21}
-STOP=${STOP:-91}
-
 SHOREWALL_INIT_SCRIPT=1
 
 ################################################################################
@@ -73,7 +70,7 @@ SHOREWALL_INIT_SCRIPT=1
 command="$action"
 
 start() {
-	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command ${STARTOPTIONS:-$@}
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $STARTOPTIONS
 }
 
 boot() {
@@ -82,17 +79,17 @@ start
 }
 
 restart() {
-	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command ${RESTARTOPTIONS:-$@}
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $RESTARTOPTIONS
 }
 
 reload() {
-	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command ${RELOADOPTION:-$@}
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $RELOADOPTION
 }
 
 stop() {
-	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command ${STOPOPTIONS:-$@}
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $STOPOPTIONS
 }
 
 status() {
-	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command ${STATUSOPTIONS:-$@}
+	exec ${SBINDIR}/shorewall6-lite $OPTIONS $command $STATUSOPTIONS
 }

Shorewall6-lite/shorewall6-lite.service.214

@@ -1,21 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv6 firewall (lite)
-Wants=network-online.target
-After=network-online.target
-Conflicts=ip6tables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall6-lite
-StandardOutput=syslog
-ExecStart=/sbin/shorewall6-lite $OPTIONS start
-ExecStop=/sbin/shorewall6-lite $OPTIONS stop
-
-[Install]
-WantedBy=basic.target

Shorewall6-lite/sysconfig

@@ -0,0 +1,25 @@
+# sysV init file script configuration(/etc/sysconfdir/shorewall-lite)
+
+# startup option(default "-vvv")
+OPTIONS=
+
+# change default start run level(if none empty; /etc/init.d/shorewall-lite enable)
+START=50
+
+# change default stop run level(if none empty; /etc/init.d/shorewall-lite enable)
+STOP=
+
+# option to pass when shorewall start is executed
+STARTOPTIONS=
+
+# option to pass when shorewall restart is executed
+RESTARTOPTIONS=
+
+# option to pass when shorewall reload is executed
+RELOADOPTIONS=
+
+# option to pass when shorewall stop is executed
+STOPOPTIONS=
+
+# option to pass when shorewall status is executed
+STATUSOPTIONS=

Shorewall6-lite/uninstall.sh

@@ -28,6 +28,7 @@
 
 VERSION=xxx  #The Build script inserts the actual version
 PRODUCT=shorewall6-lite
+Product="Shorewall6 Lite"
 
 usage() # $1 = exit status
 {
@@ -76,6 +77,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 finished=0
 configure=1
 
@@ -202,13 +208,15 @@ fi
 
 rm -f ${SBINDIR}/shorewall6-lite
 rm -rf ${CONFDIR}/shorewall6-lite
-rm -rf ${VARDIR}/shorewall6-lite
+rm -rf ${VARDIR}
 rm -rf ${SHAREDIR}/shorewall6-lite
 rm -rf ${LIBEXECDIR}/shorewall6-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall6-lite
 rm -f  ${SYSCONFDIR}/shorewall6-lite
 
-rm -f ${MANDIR}/man5/shorewall6-lite*
-rm -f ${MANDIR}/man8/shorewall6-lite*
+if [ -n "${MANDIR}" ]; then
+    rm -f ${MANDIR}/man5/shorewall6-lite*
+    rm -f ${MANDIR}/man8/shorewall6-lite*
+fi
 
 echo "Shorewall6 Lite Uninstalled"

Shorewall6/manpages/shorewall6-rules.xml

@@ -229,6 +229,12 @@
                 role="bold">dst</emphasis> respectively (see the -A command in
                 ipset (8)).</para>
 
+                <para>Beginning with Shorewall 5.0.3, an optional
+                <replaceable>timeout</replaceable> can be specified. This is
+                the number of seconds that the new entry in the ipset is to
+                remain valid and overrides any timeout specified when the
+                ipset was created.</para>
+
                 <para>ADD is non-terminating. Even if a packet matches the
                 rule, it is passed on to the next rule.</para>
               </listitem>

Shorewall6/shorewall6.service.214

@@ -1,22 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv6 firewall
-Wants=network-online.target
-After=network-online.target
-Conflicts=ip6tables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall6
-StandardOutput=syslog
-ExecStart=/sbin/shorewall6 $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall6 $OPTIONS stop
-ExecReload=/sbin/shorewall6 $OPTIONS reload $RELOADOPTIONS
-
-[Install]
-WantedBy=basic.target

Shorewall6/sysconfig

@@ -0,0 +1,25 @@
+# sysV init file script configuration(/etc/sysconfdir/shorewall-lite)
+
+# startup option(default "-vvv")
+OPTIONS=
+
+# change default start run level(if none empty; /etc/init.d/shorewall-lite enable)
+START=50
+
+# change default stop run level(if none empty; /etc/init.d/shorewall-lite enable)
+STOP=
+
+# option to pass when shorewall start is executed
+STARTOPTIONS=
+
+# option to pass when shorewall restart is executed
+RESTARTOPTIONS=
+
+# option to pass when shorewall reload is executed
+RELOADOPTIONS=
+
+# option to pass when shorewall stop is executed
+STOPOPTIONS=
+
+# option to pass when shorewall status is executed
+STATUSOPTIONS=

Shorewall6/uninstall.sh

@@ -28,6 +28,7 @@
 
 VERSION=xxx #The Build script inserts the actual version
 PRODUCT=shorewall6
+Product=Shorewall6
 
 usage() # $1 = exit status
 {
@@ -76,6 +77,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 finished=0
 configure=1
 
@@ -184,14 +190,23 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-if [ -n "$SYSTEMD" ]; then
+[ -n "$SERVICEDIR" ] || SERVICEDIR=${SYSTEMD}
+
+if [ -n "$SERVICEDIR" ]; then
     [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
-    rm -f $SYSTEMD/shorewall6.service
+    rm -f $SERVICEDIR/shorewall6.service
+fi
+
+rm -rf ${SHAREDIR}/shorewall6/version
+rm -rf ${CONFDIR}/shorewall6
+
+if [ -n "$SYSCONFDIR" ]; then
+    [ -n "$SYSCONFFILE" ] && rm -f ${SYSCONFDIR}/${PRODUCT}
 fi
 
 rm -f ${SBINDIR}/shorewall6
 rm -rf ${CONFDIR}/shorewall6
-rm -rf ${VARDIR}/shorewall6
+rm -rf ${VARDIR}
 rm -rf ${LIBEXECDIR}/shorewall6
 rm -rf ${SHAREDIR}/shorewall6
 

docs/configuration_file_basics.xml

@@ -553,8 +553,10 @@ ACCEPT      net:\
       </listitem>
     </itemizedlist>
 
-    <para>The following table shows the column names for each of the
-    table-oriented configuration files.</para>
+    <para>In Shorewall 5.0.3, the sample configuration files and the man pages
+    were updated to use the same column names in both the column headings and
+    in the alternate specification format. The following table shows the
+    column names for each of the table-oriented configuration files.</para>
 
     <note>
       <para>Column names are <emphasis