Renew timeout on matched dbl entries

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -235,7 +235,8 @@ for on in \
     SPARSE \
     ANNOTATED \
     VARLIB \
-    VARDIR
+    VARDIR \
+    DEFAULT_PAGER
 do
     echo "$on=${options[${on}]}"
     echo "$on=${options[${on}]}" >> shorewallrc

Shorewall-core/configure.pl

@@ -209,7 +209,8 @@ for ( qw/ HOST
 	  SPARSE
 	  ANNOTATED
 	  VARLIB
-	  VARDIR / ) {
+	  VARDIR
+          DEFAULT_PAGER / ) {
 
     my $val = $options{$_} || '';
 

Shorewall-core/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Core Modules
 #
-#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #

Shorewall-core/lib.common

@@ -25,6 +25,22 @@
 # scripts rather than loaded at run-time.
 #
 #########################################################################################
+#
+# Wrapper around logger that sets the tag according to $SW_LOGGERTAG
+#
+mylogger() {
+    local level
+
+    level=$1
+    shift
+
+    if [ -n "$SW_LOGGERTAG" ]; then
+	logger -p $level -t "$SW_LOGGERTAG" $*
+    else
+	logger -p $level $*
+    fi
+}
+
 #
 # Issue a message and stop
 #
@@ -33,24 +49,24 @@ startup_error() # $* = Error Message
     echo "   ERROR: $@: Firewall state not changed" >&2
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%b %d %T') "
+        timestamp="$(date +'%b %e %T') "
         echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
     fi
 
     case $COMMAND in
         start)
-	    logger -p kern.err "ERROR:$g_product start failed:Firewall state not changed"
+	    mylogger kern.err "ERROR:$g_product start failed:Firewall state not changed"
 	    ;;
 	restart)
-	    logger -p kern.err "ERROR:$g_product restart failed:Firewall state not changed"
+	    mylogger kern.err "ERROR:$g_product restart failed:Firewall state not changed"
 	    ;;
 	restore)
-	    logger -p kern.err "ERROR:$g_product restore failed:Firewall state not changed"
+	    mylogger kern.err "ERROR:$g_product restore failed:Firewall state not changed"
 	    ;;
     esac
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%b %d %T') "
+        timestamp="$(date +'%b %e %T') "
 
 	case $COMMAND in
 	    start)
@@ -696,9 +712,9 @@ find_file()
 set_state () # $1 = state
 {
     if [ $# -gt 1 ]; then
-	echo "$1 ($(date)) from $2" > ${VARDIR}/state
+	echo "$1 $(date) from $2" > ${VARDIR}/state
     else
-	echo "$1 ($(date))" > ${VARDIR}/state
+	echo "$1 $(date)" > ${VARDIR}/state
     fi
 }
 
@@ -760,7 +776,7 @@ mutex_on()
 		error_message "WARNING: Stale lockfile ${lockf} removed"
 	    elif [ $lockpid -eq $$ ]; then
                 return 0
-	    elif ! qt ps p ${lockpid}; then
+	    elif ! ps | grep -v grep | qt grep ${lockpid}; then
 		rm -f ${lockf}
 		error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
 	    fi
@@ -772,10 +788,8 @@ mutex_on()
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
 	elif qt mywhich lock; then
-            lock -${MUTEX_TIMEOUT} -r1 ${lockf}
-            chmod u+w ${lockf}
-            echo $$ > ${lockf}
-            chmod u-w ${lockf}
+            lock ${lockf}
+            chmod u=r ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1
@@ -797,6 +811,7 @@ mutex_on()
 #
 mutex_off()
 {
+    [ -f ${CONFDIR}/rc.common ] && lock -u ${LOCKFILE:=${VARDIR}/lock}
     rm -f ${LOCKFILE:=${VARDIR}/lock}
 }
 

Shorewall-core/shorewallrc.apple

@@ -19,3 +19,4 @@ SERVICEFILE=                           #Unused on OS X
 SYSCONFDIR=                            #Unused on OS X
 SPARSE=Yes                             #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
 VARLIB=/var/lib                        #Unused on OS X
+DEFAULT_PAGER=			       #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.archlinux

@@ -20,3 +20,4 @@ SERVICEFILE=                           #Name of the file to install in $SYSTEMD.
 SPARSE=                                #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                        #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT              #Directory where product variable data is stored.
+DEFAULT_PAGER=			       #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.cygwin

@@ -19,3 +19,4 @@ SERVICEFILE=                          #Unused on Cygwin
 SYSCONFDIR=                           #Unused on Cygwin
 SPARSE=Yes                            #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
 VARLIB=/var/lib                       #Unused on Cygwin
+DEFAULT_PAGER=			      #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.debian.systemd

@@ -21,3 +21,4 @@ SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (s
 SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib				#Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT		#Directory where product variable data is stored.
+DEFAULT_PAGER=/usr/bin/less		#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.debian.sysvinit

@@ -21,3 +21,4 @@ SERVICEDIR=				#Directory where .service files are installed (systems running sy
 SPARSE=Yes                              #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=/usr/bin/less		#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.default

@@ -21,3 +21,4 @@ SYSCONFDIR=                             #Directory where SysV init parameter fil
 SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.openwrt

@@ -21,3 +21,4 @@ SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.se
 SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/lib                             #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.redhat

@@ -21,3 +21,4 @@ SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter fil
 SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.slackware

@@ -22,3 +22,4 @@ SYSCONFDIR=                                #Name of the directory where SysV ini
 ANNOTATED=                                 #If non-empty, install annotated configuration files
 VARLIB=/var/lib                            #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT                  #Directory where product variable data is stored.
+DEFAULT_PAGER=				   #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.suse

@@ -7,17 +7,18 @@ PREFIX=/usr                                           #Top-level directory for s
 CONFDIR=/etc                                          #Directory where subsystem configurations are installed
 SHAREDIR=${PREFIX}/share                              #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/lib                              #Directory for executable scripts.
-PERLLIBDIR=${PREFIX}/lib/perl5/vendor_perl/5.14.2     #Directory to install Shorewall Perl module directory
+PERLLIBDIR=${PREFIX}/lib/perl5/site-perl              #Directory to install Shorewall Perl module directory
 SBINDIR=/usr/sbin                                     #Directory where system administration programs are installed
 MANDIR=${SHAREDIR}/man/                               #Directory where manpages are installed.
 INITDIR=/etc/init.d                                   #Directory where SysV init scripts are installed.
-INITFILE=$PRODUCT                                     #Name of the product's SysV init script
+INITFILE=                                             #Name of the product's SysV init script
 INITSOURCE=init.suse.sh                               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                                            #If non-zero, annotated configuration files are installed
-SERVICEDIR=                                           #Directory where .service files are installed (systems running systemd only)
-SERVICEFILE=                      		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SERVICEDIR=/usr/lib/systemd/system                    #Directory where .service files are installed (systems running systemd only)
+SERVICEFILE=$PRODUCT.service          		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=sysconfig                                 #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=/etc/sysconfig/                            #Directory where SysV init parameter files are installed
 SPARSE=                                               #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                                       #Directory where persistent product data is stored.
 VARDIR=${VARLIB}/$PRODUCT                             #Directory where product variable data is stored.
+DEFAULT_PAGER=				   	      #Pager to use if none specified in shorewall[6].conf

Shorewall-core/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://www.shorewall.net
 #
@@ -117,6 +117,7 @@ fi
 echo "Uninstalling Shorewall Core $VERSION"
 
 rm -rf ${SHAREDIR}/shorewall
+rm -f ~/.shorewallrc
 
 echo "Shorewall Core Uninstalled"
 

Shorewall-init/README.txt

@@ -1 +0,0 @@
-This is the Shorewall-init stable 4.4 branch of Git.

Shorewall-init/init.debian.sh

@@ -30,7 +30,7 @@
 # Required-Stop:     $local_fs
 # X-Stop-After:      $network
 # Default-Start:     S
-# Default-Stop:      0 6
+# Default-Stop:      0 1 6
 # Short-Description: Initialize the firewall at boot time
 # Description:       Place the firewall in a safe state at boot time prior to
 #                    bringing up the network

Shorewall-init/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Init
 #
-#     (c) 2000-20114 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2010 - Roberto C. Sanchez (roberto@connexer.com)
 #
 #       Shorewall documentation is available at http://shorewall.net
@@ -412,7 +412,7 @@ if [ $HOST = debian ]; then
 
     if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
-	    mkdir ${DESTDIR}${ETC}/default
+	    mkdir -p ${DESTDIR}${ETC}/default
 	fi
 
 	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
@@ -572,9 +572,9 @@ if [ -z "$DESTDIR" ]; then
 		    cant_autostart
 		fi
 	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
-		/etc/init.d/shorewall-inir enable
+		/etc/init.d/$PRODUCT enable
 		if /etc/init.d/shorewall-init enabled; then
-		    echo "Shorrewall Init will start automatically at boot"
+		    echo "$Product will start automatically at boot"
 		else
 		    cant_autostart
 		fi
@@ -585,7 +585,7 @@ if [ -z "$DESTDIR" ]; then
     fi
 else
     if [ $configure -eq 1 -a -n "$first_install" ]; then
-	if [ $HOST = debian ]; then
+	if [ $HOST = debian -a -z "$SERVICEDIR" ]; then
 	    if [ -n "${DESTDIR}" ]; then
 		mkdir -p ${DESTDIR}/etc/rcS.d
 	    fi

Shorewall-init/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.sourceforge.net
 #

Shorewall-lite/README.txt

@@ -1 +0,0 @@
-This is the Shorewall-lite stable 4.4 branch of Git.

Shorewall-lite/init.debian.sh

@@ -5,7 +5,7 @@
 # Required-Start:    $network $remote_fs
 # Required-Stop:     $network $remote_fs
 # Default-Start:     S
-# Default-Stop:      0 6
+# Default-Stop:      0 1 6
 # Short-Description: Configure the firewall at boot time
 # Description:       Configure the firewall according to the rules specified in
 #                    /etc/shorewall-lite
@@ -92,10 +92,11 @@ shorewall_start () {
 
 # stop the firewall
 shorewall_stop () {
-  echo -n "Stopping \"Shorewall firewall\": "
   if [ "$SAFESTOP" = 1 ]; then
+      echo -n "Stopping \"Shorewall Lite firewall\": "
       $SRWL $SRWL_OPTS stop >> $INITLOG 2>&1 && echo "done." || echo_notdone
   else
+      echo -n "Clearing all \"Shorewall Lite firewall\" rules: "
       $SRWL $SRWL_OPTS clear >> $INITLOG 2>&1 && echo "done." || echo_notdone
   fi
   return 0

Shorewall-lite/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Lite
 #
-#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -495,7 +495,7 @@ done
 # Install the Man Pages
 #
 
-if [ -d manpages ]; then
+if [ -d manpages -a -n "$MANDIR" ]; then
     cd manpages
 
     mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
@@ -550,7 +550,7 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
     fi
 
     install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
-    echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+    echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ ${SHAREDIR} != /usr/share ]; then

Shorewall-lite/manpages/shorewall-lite.xml

@@ -47,6 +47,19 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>blacklist</option></arg>
+
+      <arg choice="plain"><replaceable>address</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -689,7 +702,45 @@
           blacklisted by a <emphasis role="bold">drop</emphasis>, <emphasis
           role="bold">logdrop</emphasis>, <emphasis
           role="bold">reject</emphasis>, or <emphasis
-          role="bold">logreject</emphasis> command.</para>
+          role="bold">logreject</emphasis> command. Beginning with Shorewall
+          5.0.10, this command can also re-enable addresses blacklisted using
+          the <command>blacklist</command> command.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">blacklist</emphasis>
+        <replaceable>address</replaceable> [ <replaceable>option</replaceable>
+        ... ]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8 and requires
+          DYNAMIC_BLACKLIST=ipset.. in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).
+          Causes packets from the given host or network
+          <replaceable>address</replaceable> to be dropped, based on the
+          setting of BLACKLIST in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). The
+          <replaceable>address</replaceable> along with any
+          <replaceable>option</replaceable>s are passed to the <command>ipset
+          add</command> command.</para>
+
+          <para>If the <option>disconnect</option> option is specified in the
+          DYNAMIC_BLACKLISTING setting, then the effective VERBOSITY
+          determines the amount of information displayed:</para>
+
+          <itemizedlist>
+            <listitem>
+              <para>If the effective verbosity is &gt; 0, then a message
+              giving the number of conntrack flows deleted by the command is
+              displayed.</para>
+            </listitem>
+
+            <listitem>
+              <para>If the effective verbosity is &gt; 1, then the conntrack
+              table entries deleted by the command are also displayed.</para>
+            </listitem>
+          </itemizedlist>
         </listitem>
       </varlistentry>
 
@@ -1553,6 +1604,34 @@
     started.</para>
   </refsect1>
 
+  <refsect1>
+    <title>ENVIRONMENT</title>
+
+    <para>Two environmental variables are recognized by Shorewall-lite:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term>SHOREWALL_INIT_SCRIPT</term>
+
+        <listitem>
+          <para>When set to 1, causes Std out to be redirected to the file
+          specified in the STARTUP_LOG option in <ulink
+          url="shorewall.conf.html">shorewall.conf(5)</ulink>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>SW_LOGGERTAG</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8. When set to a non-empty value, that
+          value is passed to the logger utility in its -t (--tag)
+          option.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
   <refsect1>
     <title>FILES</title>
 

Shorewall-lite/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.sourceforge.net
 #

Shorewall/Macros/macro.RedisCluster

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.RedisCluster
+#
+# This macro handles Redis Cluster traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	16379

Shorewall/Macros/macro.RedisSentinel

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.RedisSentinel
+#
+# This macro handles Redis Sentinel traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	26379

Shorewall/Macros/macro.SNMPTrap.deprecated

@@ -0,0 +1,9 @@
+#
+# Shorewall - /usr/share/shorewall/macro.SNMPtrap
+#
+# This macro deprecated by SNMPtrap.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+SNMPtrap

Shorewall/Perl/Shorewall/ARP.pm

@@ -244,7 +244,7 @@ sub create_arptables_load( $ ) {
 
     emit "exec 3>\${VARDIR}/.arptables-input";
 
-    my $date = localtime;
+    my $date = compiletime;
 
     unless ( $test ) {
 	emit_unindented '#';
@@ -294,7 +294,7 @@ sub create_arptables_load( $ ) {
 #
 sub preview_arptables_load() {
 
-    my $date = localtime;
+    my $date = compiletime;
 
     print "#\n# Generated by Shorewall $globals{VERSION} - $date\n#\n";
 

Shorewall/Perl/Shorewall/Accounting.pm

@@ -59,21 +59,21 @@ our $acctable;
 #
 
 use constant {
-	      LEGACY      => 0,
-	      PREROUTING  => 1,
-	      INPUT       => 2,
-	      OUTPUT      => 3,
-	      FORWARD     => 4,
-	      POSTROUTING => 5
+	      LEGACY_SECTION      => 0,
+	      PREROUTING_SECTION  => 1,
+	      INPUT_SECTION       => 2,
+	      OUTPUT_SECTION      => 3,
+	      FORWARD_SECTION     => 4,
+	      POSTROUTING_SECTION => 5
 	  };
 #
 # Map names to values
 #
-our %asections = ( PREROUTING  => PREROUTING,
-		   INPUT       => INPUT,
-		   FORWARD     => FORWARD,
-		   OUTPUT      => OUTPUT,
-		   POSTROUTING => POSTROUTING
+our %asections = ( PREROUTING  => PREROUTING_SECTION,
+		   INPUT       => INPUT_SECTION,
+		   FORWARD     => FORWARD_SECTION,
+		   OUTPUT      => OUTPUT_SECTION,
+		   POSTROUTING => POSTROUTING_SECTION
 		 );
 
 #
@@ -157,7 +157,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 
     $jumpchainref = 0;
 
-    $asection = LEGACY if $asection < 0;
+    $asection = LEGACY_SECTION if $asection < 0;
 
     our $disposition = '';
 

Shorewall/Perl/Shorewall/Compiler.pm

@@ -76,7 +76,7 @@ sub initialize_package_globals( $$$ ) {
 #
 # First stage of script generation.
 #
-#    Copy lib.core and lib.common to the generated script.
+#    Copy lib.runtime and lib.common to the generated script.
 #    Generate the various user-exit jacket functions.
 #
 #    Note: This function is not called when $command eq 'check'. So it must have no side effects other
@@ -90,12 +90,12 @@ sub generate_script_1( $ ) {
 	if ( $test ) {
 	    emit "#!$config{SHOREWALL_SHELL}\n#\n# Compiled firewall script generated by Shorewall-perl\n#";
 	} else {
-	    my $date = localtime;
+	    my $date = compiletime;
 
 	    emit "#!$config{SHOREWALL_SHELL}\n#\n# Compiled firewall script generated by Shorewall $globals{VERSION} - $date\n#";
 
-	    copy  $globals{SHAREDIRPL} . '/lib.core', 0;
-	    copy2 $globals{SHAREDIRPL} . '/lib.common', 0;
+	    copy  $globals{SHAREDIRPL} . '/lib.runtime', 0;
+	    copy2 $globals{SHAREDIRPL} . '/lib.common' , $debug;
 	}
 
     }
@@ -261,7 +261,15 @@ sub generate_script_2() {
 	   '# The library requires that ${VARDIR} exist',
 	   '#',
 	   '[ -d ${VARDIR} ] || mkdir -p ${VARDIR}'
-	   );
+	);
+
+    if ( $config{DOCKER} ) {
+	emit( '',
+	      'chain_exists DOCKER nat && chain_exists DOCKER && g_docker=Yes',
+	    );
+	emit( 'chain_exists DOCKER-ISOLATION && g_dockernetwork=Yes]' );
+	emit( '' );
+    }
 
     pop_indent;
 
@@ -360,6 +368,7 @@ sub generate_script_3($) {
     create_arptables_load( $test ) if $have_arptables;
     create_chainlist_reload( $_[0] );
     create_save_ipsets;
+    create_load_ipsets;
 
     emit "#\n# Start/Reload the Firewall\n#";
 
@@ -398,7 +407,9 @@ sub generate_script_3($) {
 	   'fi',
 	   '' );
 
-    load_ipsets;
+    emit( 'load_ipsets' ,
+	  '' );
+
     create_nfobjects;
     verify_address_variables;
     save_dynamic_chains;
@@ -565,16 +576,16 @@ date > ${VARDIR}/restarted
 
 case $COMMAND in
     start)
-        logger -p kern.info "$g_product started"
+        mylogger kern.info "$g_product started"
         ;;
-    reloaded)
-        logger -p kern.info "$g_product reloaded"
+    reload)
+        mylogger kern.info "$g_product reloaded"
         ;;
     refresh)
-        logger -p kern.info "$g_product refreshed"
+        mylogger kern.info "$g_product refreshed"
         ;;
     restore)
-        logger -p kern.info "$g_product restored"
+        mylogger kern.info "$g_product restored"
         ;;
 esac
 EOF
@@ -585,6 +596,21 @@ EOF
 
 }
 
+#
+# Generate info_command()
+#
+sub compile_info_command() {
+    my $date = compiletime;
+
+    emit( "\n",
+	  "#",
+	  "# Echo the date and time when this script was compiled along with the Shorewall version",
+	  "#",
+	  "info_command() {" ,
+	  qq(    echo "compiled $date by Shorewall version $globals{VERSION}") ,
+	  "}\n" );
+}   
+
 #
 #  The Compiler.
 #
@@ -859,10 +885,6 @@ sub compiler {
     #
     complete_policy_chains;
     #
-    # Reject Action
-    #
-    process_reject_action if $config{REJECT_ACTION};
-    #
     # Accounting.
     #
     setup_accounting if $config{ACCOUNTING};
@@ -915,6 +937,10 @@ sub compiler {
 	#
 	compile_updown;
 	#
+	# Echo the compilation time and date
+	#
+	compile_info_command unless $test;
+	#
 	# Copy the footer to the script
 	#
 	copy $globals{SHAREDIRPL} . 'prog.footer' unless $test;

Shorewall/Perl/Shorewall/IPAddrs.pm

@@ -432,13 +432,18 @@ sub validate_port( $$ ) {
 sub validate_portpair( $$ ) {
     my ($proto, $portpair) = @_;
     my $what;
+    my $pair = $portpair;
+    #
+    # Accept '-' as a port-range separator
+    #
+    $pair =~ tr/-/:/;
 
-    fatal_error "Invalid port range ($portpair)" if $portpair =~ tr/:/:/ > 1;
+    fatal_error "Invalid port range ($portpair)" if $pair =~ tr/:/:/ > 1;
 
-    $portpair = "0$portpair"       if substr( $portpair,  0, 1 ) eq ':';
-    $portpair = "${portpair}65535" if substr( $portpair, -1, 1 ) eq ':';
+    $pair = "0$pair"       if substr( $pair,  0, 1 ) eq ':';
+    $pair = "${pair}65535" if substr( $pair, -1, 1 ) eq ':';
 
-    my @ports = split /:/, $portpair, 2;
+    my @ports = split /:/, $pair, 2;
 
     my $protonum = resolve_proto( $proto ) || 0;
 
@@ -497,7 +502,7 @@ sub validate_port_list( $$ ) {
     my ( $proto, $list ) = @_;
     my @list   = split_list( $list, 'port' );
 
-    if ( @list > 1 && $list =~ /:/ ) {
+    if ( @list > 1 && $list =~ /[:-]/ ) {
 	require_capability( 'XMULTIPORT' , 'Port ranges in a port list', '' );
     }
 

Shorewall/Perl/Shorewall/Misc.pm

@@ -89,6 +89,7 @@ sub setup_ecn()
 {
     my %interfaces;
     my @hosts;
+    my $interfaceref;
 
     if ( my $fn = open_file 'ecn' ) {
 
@@ -105,7 +106,13 @@ sub setup_ecn()
 						    2 );
 
 	    fatal_error 'INTERFACE must be specified' if $interface eq '-';
-	    fatal_error "Unknown interface ($interface)" unless known_interface $interface;
+	    fatal_error "Unknown interface ($interface)" unless $interfaceref = known_interface( $interface );
+
+	    if ( $interfaceref->{root} ) {
+		$interface = $interfaceref->{name} if $interface eq $interfaceref->{physical};
+	    } else {
+		$interface = $interfaceref->{name};
+	    }
 
 	    my $lineinfo = shortlineinfo( '' );
 
@@ -127,12 +134,12 @@ sub setup_ecn()
 	    for my $interface ( @interfaces ) {
 		my $chainref = ensure_chain 'mangle', ecn_chain( $interface );
 
-		add_ijump_extended $mangle_table->{POSTROUTING} , j => $chainref, $interfaces{$interface}, p => 'tcp', imatch_dest_dev( $interface ) if have_capability 'MANGLE_FORWARD';
-		add_ijump_extended $mangle_table->{OUTPUT},       j => $chainref, $interfaces{$interface}, p => 'tcp', imatch_dest_dev( $interface );
+		add_ijump $mangle_table->{POSTROUTING} , j => $chainref, $interfaces{$interface}, p => 'tcp', imatch_dest_dev( $interface ) if have_capability 'MANGLE_FORWARD';
+		add_ijump $mangle_table->{OUTPUT},       j => $chainref, $interfaces{$interface}, p => 'tcp', imatch_dest_dev( $interface );
 	    }
 
 	    for my $host ( @hosts ) {
-		add_ijump_extended( $mangle_table->{ecn_chain $host->[0]}, j => 'ECN', $host=>[1], targetopts => '--ecn-tcp-remove', p => 'tcp',  imatch_dest_net( $host->[2] ) );
+		add_ijump( $mangle_table->{ecn_chain $host->[0]}, j => 'ECN', $host->[1], targetopts => '--ecn-tcp-remove', p => 'tcp',  imatch_dest_net( $host->[2] ) );
 	    }
 	}
     }
@@ -193,6 +200,7 @@ sub remove_blacklist( $ ) {
     if ( $changed ) {
 	rename $fn, "$fn.bak" or fatal_error "Unable to rename $fn to $fn.bak: $!";
 	rename "$fn.new", $fn or fatal_error "Unable to rename $fn.new to $fn: $!";
+	transfer_permissions( "$fn.bak", $fn );
 	progress_message2 "\u$file file $fn saved in $fn.bak"
     }
 }
@@ -295,12 +303,13 @@ sub convert_blacklist() {
 	if ( @rules ) {
 	    my $fn1 = find_writable_file( 'blrules' );
 	    my $blrules;
-	    my $date = localtime;
+	    my $date = compiletime;
 
 	    if ( -f $fn1 ) {
 		open $blrules, '>>', $fn1 or fatal_error "Unable to open $fn1: $!";
 	    } else {
 		open $blrules, '>',  $fn1 or fatal_error "Unable to open $fn1: $!";
+		transfer_permissions( $fn, $fn1 );
 		print $blrules <<'EOF';
 #
 # Shorewall version 5.0 - Blacklist Rules File
@@ -386,7 +395,7 @@ sub convert_routestopped() {
 	my ( @allhosts, %source, %dest , %notrack, @rule );
 
 	my $seq  = 0;
-	my $date = localtime;
+	my $date = compiletime;
 
 	my ( $stoppedrules, $fn1 );
 
@@ -394,6 +403,7 @@ sub convert_routestopped() {
 	    open $stoppedrules, '>>', $fn1 or fatal_error "Unable to open $fn1: $!";
 	} else {
 	    open $stoppedrules, '>',  $fn1 or fatal_error "Unable to open $fn1: $!";
+	    transfer_permissions( $fn, $fn1 );
 	    print $stoppedrules <<'EOF';
 #
 # Shorewall version 5 - Stopped Rules File
@@ -414,7 +424,7 @@ EOF
 
 	first_entry(
 		    sub {
-			my $date = localtime;
+			my $date = compiletime;
 			progress_message2 "$doing $fn...";
 			print( $stoppedrules
 			       "#\n" ,
@@ -628,6 +638,34 @@ sub process_stoppedrules() {
     $result;
 }
 
+sub create_docker_rules() {
+    add_commands( $nat_table->{PREROUTING} , '[ -n "$g_docker" ] && echo "-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER" >&3' );
+
+    my $chainref = $filter_table->{FORWARD};
+
+    add_commands( $chainref, '[ -n "$g_dockernetwork" ] && echo "-A FORWARD -j DOCKER-ISOLATION" >&3', );
+
+    if ( my $dockerref = known_interface('docker0') ) {
+	add_commands( $chainref, 'if [ -n "$g_docker" ]; then' );
+	incr_cmd_level( $chainref );
+	add_ijump( $chainref, j => 'DOCKER', o => 'docker0' );
+	add_ijump( $chainref, j => 'ACCEPT', o => 'docker0', state_imatch 'ESTABLISHED,RELATED' );
+	add_ijump( $chainref, j => 'ACCEPT', i => 'docker0', o => '! docker0' );
+	add_ijump( $chainref, j => 'ACCEPT', i => 'docker0', o => 'docker0' ) if $dockerref->{options}{routeback};
+	decr_cmd_level( $chainref );
+	add_commands( $chainref, 'fi' );
+
+	my $outputref;
+	add_commands( $outputref = $filter_table->{OUTPUT}, 'if [ -n "$g_docker" ]; then' );
+	incr_cmd_level( $outputref );
+	add_ijump( $outputref, j => 'DOCKER' );
+	decr_cmd_level( $outputref );
+	add_commands( $outputref, 'fi' );
+    }
+
+    add_commands( $chainref, '[ -f ${VARDIR}/.filter_FORWARD ] && cat $VARDIR/.filter_FORWARD >&3', );
+}
+
 sub setup_mss();
 
 sub add_common_rules ( $ ) {
@@ -646,12 +684,123 @@ sub add_common_rules ( $ ) {
     my $level     = $config{BLACKLIST_LOG_LEVEL};
     my $tag       = $globals{BLACKLIST_LOG_TAG};
     my $rejectref = $filter_table->{reject};
+    my $dbl_type;
+    my $dbl_ipset;
+    my $dbl_level;
+    my $dbl_tag;
+    my $dbl_src_target;
+    my $dbl_dst_target;
 
-    if ( $config{DYNAMIC_BLACKLIST} ) {
-	add_rule_pair( set_optflags( new_standard_chain( 'logdrop' )  , DONT_OPTIMIZE | DONT_DELETE ), '' , 'DROP'   , $level , $tag);
-	add_rule_pair( set_optflags( new_standard_chain( 'logreject' ), DONT_OPTIMIZE | DONT_DELETE ), '' , 'reject' , $level , $tag);
-	$dynamicref =  set_optflags( new_standard_chain( 'dynamic' ) ,  DONT_OPTIMIZE );
-	add_commands( $dynamicref, '[ -f ${VARDIR}/.dynamic ] && cat ${VARDIR}/.dynamic >&3' );
+    if ( $config{REJECT_ACTION} ) {
+	process_reject_action;
+	fatal_eror( "The REJECT_ACTION ($config{REJECT_ACTION}) is not terminating" ) unless terminating( $rejectref );
+    } else {
+	if ( have_capability( 'ADDRTYPE' ) ) {
+	    add_ijump $rejectref , j => 'DROP' , addrtype => '--src-type BROADCAST';
+	} else {
+	    if ( $family == F_IPV4 ) {
+		add_commands $rejectref, 'for address in $ALL_BCASTS; do';
+	    } else {
+		add_commands $rejectref, 'for address in $ALL_ACASTS; do';
+	    }
+
+	    incr_cmd_level $rejectref;
+	    add_ijump $rejectref, j => 'DROP', d => '$address';
+	    decr_cmd_level $rejectref;
+	    add_commands $rejectref, 'done';
+	}
+
+	if ( $family == F_IPV4 ) {
+	    add_ijump $rejectref , j => 'DROP', s => '224.0.0.0/4';
+	} else {
+	    add_ijump $rejectref , j => 'DROP', s => IPv6_MULTICAST;
+	}
+
+	add_ijump $rejectref , j => 'DROP', p => 2;
+	add_ijump $rejectref , j => 'REJECT', targetopts => '--reject-with tcp-reset', p => 6;
+
+	if ( have_capability( 'ENHANCED_REJECT' ) ) {
+	    add_ijump $rejectref , j => 'REJECT', p => 17;
+
+	    if ( $family == F_IPV4 ) {
+		add_ijump $rejectref, j => 'REJECT --reject-with icmp-host-unreachable', p => 1;
+		add_ijump $rejectref, j => 'REJECT --reject-with icmp-host-prohibited';
+	    } else {
+		add_ijump $rejectref, j => 'REJECT --reject-with icmp6-addr-unreachable', p => 58;
+		add_ijump $rejectref, j => 'REJECT --reject-with icmp6-adm-prohibited';
+	    }
+	} else {
+	    add_ijump $rejectref , j => 'REJECT';
+	}
+    }
+
+    #
+    # Insure that Docker jumps are early in the builtin chains
+    #
+    create_docker_rules if $config{DOCKER};
+
+    if ( my $val = $config{DYNAMIC_BLACKLIST} ) {
+	( $dbl_type, $dbl_ipset, $dbl_level, $dbl_tag ) = split( ':', $val );
+
+	unless ( $dbl_type =~ /^ipset-only/ ) {
+	    add_rule_pair( set_optflags( new_standard_chain( 'logdrop' )  , DONT_OPTIMIZE | DONT_DELETE ), '' , 'DROP'   , $level , $tag);
+	    add_rule_pair( set_optflags( new_standard_chain( 'logreject' ), DONT_OPTIMIZE | DONT_DELETE ), '' , 'reject' , $level , $tag);
+	    $dynamicref =  set_optflags( new_standard_chain( 'dynamic' ) ,  DONT_OPTIMIZE );
+	    add_commands( $dynamicref, '[ -f ${VARDIR}/.dynamic ] && cat ${VARDIR}/.dynamic >&3' );
+	}
+
+	if ( $dbl_ipset ) {
+	    if ( $val = $globals{DBL_TIMEOUT} ) {
+		$dbl_src_target = $globals{DBL_OPTIONS} =~ /src-dst/ ? 'dbl_src' : 'dbl_log';
+
+		my $chainref = set_optflags( new_standard_chain( $dbl_src_target ) , DONT_OPTIMIZE | DONT_DELETE );
+
+		log_rule_limit( $dbl_level,
+				$chainref,
+				'dbl_log',
+				'DROP',
+				$globals{LOGLIMIT},
+				$dbl_tag,
+				'add',
+				'',
+				$origin{DYNAMIC_BLACKLIST} ) if $dbl_level;
+		add_ijump_extended( $chainref, j => "SET --add-set $dbl_ipset src --exist --timeout $val", $origin{DYNAMIC_BLACKLIST} );
+		add_ijump_extended( $chainref, j => 'DROP', $origin{DYNAMIC_BLACKLIST} );
+
+		if ( $dbl_src_target eq 'dbl_src' ) {
+		    $chainref = set_optflags( new_standard_chain( $dbl_dst_target = 'dbl_dst' ) , DONT_OPTIMIZE | DONT_DELETE );
+
+		    log_rule_limit( $dbl_level,
+				    $chainref,
+				    'dbl_log',
+				    'DROP',
+				    $globals{LOGLIMIT},
+				    $dbl_tag,
+				    'add',
+				    '',
+				    $origin{DYNAMIC_BLACKLIST} ) if $dbl_level;
+		    add_ijump_extended( $chainref, j => "SET --add-set $dbl_ipset dst --exist --timeout $val", $origin{DYNAMIC_BLACKLIST} );
+		    add_ijump_extended( $chainref, j => 'DROP', $origin{DYNAMIC_BLACKLIST} );
+		} else {
+		    $dbl_dst_target = $dbl_src_target;
+		}		    
+	    } elsif ( $dbl_level ) {
+		my $chainref = set_optflags( new_standard_chain( $dbl_src_target = 'dbl_log' ) , DONT_OPTIMIZE | DONT_DELETE );
+
+		log_rule_limit( $dbl_level,
+				$chainref,
+				'dbl_log',
+				'DROP',
+				$globals{LOGLIMIT},
+				$dbl_tag,
+				'add',
+				'',
+				$origin{DYNAMIC_BLACKLIST} );
+		add_ijump_extended( $chainref, j => 'DROP', $origin{DYNAMIC_BLACKLIST} );
+	    } else {
+		$dbl_src_target = $dbl_dst_target = 'DROP'; 
+	    }
+	}
     }
 
     setup_mss;
@@ -755,8 +904,30 @@ sub add_common_rules ( $ ) {
 		}
 	    }
 
+	    if ( $dbl_ipset && ( ( my $setting = get_interface_option( $interface, 'dbl' ) ) ne '0:0' ) ) {
+
+		my ( $in, $out ) = split /:/, $setting;
+
+		if ( $in  == 1 ) {
+		    #
+		    # src
+		    #
+		    add_ijump_extended( $filter_table->{input_option_chain($interface)},   j => $dbl_src_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset src" );
+		    add_ijump_extended( $filter_table->{forward_option_chain($interface)}, j => $dbl_src_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset src" );
+		} elsif ( $in == 2 ) {
+		    add_ijump_extended( $filter_table->{forward_option_chain($interface)}, j => $dbl_dst_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset dst" );
+		}
+
+		if ( $out == 2 ) {
+		    #
+		    # dst
+		    #
+		    add_ijump_extended( $filter_table->{output_option_chain($interface)},  j => $dbl_dst_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset dst" );
+		}
+	    }
+	    
 	    for ( option_chains( $interface ) ) {
-		add_ijump_extended( $filter_table->{$_}, j => $dynamicref, $origin{DYNAMIC_BLACKLIST}, @state ) if $dynamicref;
+		add_ijump_extended( $filter_table->{$_}, j => $dynamicref, $origin{DYNAMIC_BLACKLIST}, @state ) if $dynamicref && ( get_interface_option( $interface, 'dbl' ) ne '0:0' );
 		add_ijump_extended( $filter_table->{$_}, j => 'ACCEPT',    $origin{FASTACCEPT},        state_imatch $faststate )->{comment} = '' if $config{FASTACCEPT};
 	    }
 	}
@@ -915,46 +1086,6 @@ sub add_common_rules ( $ ) {
 	}
     }
 
-    unless ( $config{REJECT_ACTION} ) {
-	if ( have_capability( 'ADDRTYPE' ) ) {
-	    add_ijump $rejectref , j => 'DROP' , addrtype => '--src-type BROADCAST';
-	} else {
-	    if ( $family == F_IPV4 ) {
-		add_commands $rejectref, 'for address in $ALL_BCASTS; do';
-	    } else {
-		add_commands $rejectref, 'for address in $ALL_ACASTS; do';
-	    }
-
-	    incr_cmd_level $rejectref;
-	    add_ijump $rejectref, j => 'DROP', d => '$address';
-	    decr_cmd_level $rejectref;
-	    add_commands $rejectref, 'done';
-	}
-
-	if ( $family == F_IPV4 ) {
-	    add_ijump $rejectref , j => 'DROP', s => '224.0.0.0/4';
-	} else {
-	    add_ijump $rejectref , j => 'DROP', s => IPv6_MULTICAST;
-	}
-
-	add_ijump $rejectref , j => 'DROP', p => 2;
-	add_ijump $rejectref , j => 'REJECT', targetopts => '--reject-with tcp-reset', p => 6;
-
-	if ( have_capability( 'ENHANCED_REJECT' ) ) {
-	    add_ijump $rejectref , j => 'REJECT', p => 17;
-
-	    if ( $family == F_IPV4 ) {
-		add_ijump $rejectref, j => 'REJECT --reject-with icmp-host-unreachable', p => 1;
-		add_ijump $rejectref, j => 'REJECT --reject-with icmp-host-prohibited';
-	    } else {
-		add_ijump $rejectref, j => 'REJECT --reject-with icmp6-addr-unreachable', p => 58;
-		add_ijump $rejectref, j => 'REJECT --reject-with icmp6-adm-prohibited';
-	    }
-	} else {
-	    add_ijump $rejectref , j => 'REJECT';
-	}
-    }
-
     $list = find_interfaces_by_option 'dhcp';
 
     if ( @$list ) {
@@ -1070,10 +1201,18 @@ sub add_common_rules ( $ ) {
 
 	    add_commands( $chainref, '[ -s /${VARDIR}/.UPnP ] && cat ${VARDIR}/.UPnP >&3' );
 
+	    my $chainref1;
+
+	    if ( $config{MINIUPNPD} ) {
+		$chainref1 = set_optflags( new_nat_chain( 'MINIUPNPD-POSTROUTING' ), DONT_OPTIMIZE ); 
+		add_commands( $chainref, '[ -s /${VARDIR}/.MINIUPNPD-POSTROUTING ] && cat ${VARDIR}/.MINIUPNPD-POSTROUTING >&3' );
+	    }
+
 	    $announced = 1;
 
 	    for $interface ( @$list ) {
-		add_ijump_extended $nat_table->{PREROUTING} , j => 'UPnP', get_interface_origin($interface), imatch_source_dev ( $interface );
+		add_ijump_extended $nat_table->{PREROUTING} ,            j => 'UPnP',                   get_interface_origin($interface), imatch_source_dev ( $interface );
+		add_ijump_extended $nat_table->{$globals{POSTROUTING}} , j => 'MINIUPNPD-POSTROUTING' , $origin{MINIUPNPD}              , imatch_dest_dev   ( $interface ) if $chainref1;
 	    }
 	}
 
@@ -1508,13 +1647,15 @@ sub add_interface_jumps {
     # Add Nat jumps
     #
     for my $interface ( @_ ) {
-	addnatjump 'POSTROUTING' , snat_chain( $interface ), imatch_dest_dev( $interface );
+	addnatjump $globals{POSTROUTING} , snat_chain( $interface ), imatch_dest_dev( $interface );
     }
 
+    addnatjump( 'POSTROUTING', 'SHOREWALL' ) if $config{DOCKER};
+
     for my $interface ( @interfaces  ) {
 	addnatjump 'PREROUTING'  , input_chain( $interface )  , imatch_source_dev( $interface );
-	addnatjump 'POSTROUTING' , output_chain( $interface ) , imatch_dest_dev( $interface );
-	addnatjump 'POSTROUTING' , masq_chain( $interface ) , imatch_dest_dev( $interface );
+	addnatjump $globals{POSTROUTING} , output_chain( $interface ) , imatch_dest_dev( $interface );
+	addnatjump $globals{POSTROUTING} , masq_chain( $interface ) , imatch_dest_dev( $interface );
 
 	if ( have_capability 'RAWPOST_TABLE' ) {
 	    insert_ijump ( $rawpost_table->{POSTROUTING}, j => postrouting_chain( $interface ), 0, imatch_dest_dev( $interface) )   if $rawpost_table->{postrouting_chain $interface};
@@ -1759,12 +1900,14 @@ sub add_output_jumps( $$$$$$$$ ) {
     my $use_output        = 0;
     my @dest              = imatch_dest_net $net;
     my @ipsec_out_match   = match_ipsec_out $zone , $hostref;
+    my @zone_interfaces   = keys %{zone_interfaces( $zone )};
 
-    if ( @vservers || use_output_chain( $interface, $interfacechainref ) || ( @{$interfacechainref->{rules}} && ! $chain1ref ) ) {
+    if ( @vservers || use_output_chain( $interface, $interfacechainref ) || ( @{$interfacechainref->{rules}} && ! $chain1ref ) || @zone_interfaces > 1 ) {
 	#
 	# - There are vserver zones (so OUTPUT will have multiple source; or
 	# - We must use the interface output chain; or
 	# - There are rules in the interface chain and none in the rules chain
+	# - The zone has multiple interfaces
 	#
 	#   In any of these cases use the inteface output chain
 	#
@@ -1781,7 +1924,7 @@ sub add_output_jumps( $$$$$$$$ ) {
 		unless $output_jump_added{$interface}++;
 	} else {
 	    #
-	    # Not a bridge -- match the input interface
+	    # Not a bridge -- match the output interface
 	    #
 	    add_ijump_extended $filter_table->{OUTPUT}, j => $outputref, $origin, imatch_dest_dev( $interface ) unless $output_jump_added{$interface}++;
 	}
@@ -2246,8 +2389,8 @@ sub generate_matrix() {
     #
     # Make sure that the 1:1 NAT jumps are last in PREROUTING
     #
-    addnatjump 'PREROUTING'  , 'nat_in';
-    addnatjump 'POSTROUTING' , 'nat_out';
+    addnatjump 'PREROUTING'          , 'nat_in';
+    addnatjump $globals{POSTROUTING} , 'nat_out';
 
     add_interface_jumps @interfaces unless $interface_jumps_added;
 
@@ -2391,16 +2534,16 @@ EOF
     emit <<'EOF';
             case $COMMAND in
 	        start)
-	            logger -p kern.err "ERROR:$g_product start failed"
+	            mylogger kern.err "ERROR:$g_product start failed"
 	            ;;
 	        reload)
-	            logger -p kern.err "ERROR:$g_product reload failed"
+	            mylogger kern.err "ERROR:$g_product reload failed"
 	            ;;
 	        refresh)
-	            logger -p kern.err "ERROR:$g_product refresh failed"
+	            mylogger kern.err "ERROR:$g_product refresh failed"
 	            ;;
                 enable)
-                    logger -p kern.err "ERROR:$g_product 'enable $g_interface' failed"
+                    mylogger kern.err "ERROR:$g_product 'enable $g_interface' failed"
                     ;;
             esac
 
@@ -2452,9 +2595,18 @@ EOF
     if [ $COMMAND = clear -a -f /proc/sys/net/netfilter/nf_conntrack_helper ]; then
         echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper
     fi
-
 EOF
 
+    if ( $config{DOCKER} ) {
+	push_indent;
+	emit( 'if [ $COMMAND = stop ]; then' );
+	push_indent;
+	save_docker_rules( $family == F_IPV4 ? '${IPTABLES}'      : '${IP6TABLES}');
+	pop_indent;
+	emit( "fi\n");
+	pop_indent;
+    }
+
     if ( have_capability( 'NAT_ENABLED' ) ) {
 	emit<<'EOF';
     if [ -f ${VARDIR}/nat ]; then
@@ -2504,6 +2656,10 @@ EOF
     emit( 'undo_routing',
 	  "restore_default_route $config{USE_DEFAULT_RT}"
 	  );
+    #
+    # Insure that Docker jumps are early in the builtin chains
+    #
+    create_docker_rules if $config{DOCKER};
 
     if ( $config{ADMINISABSENTMINDED} ) {
 	add_ijump $filter_table ->{$_}, j => 'ACCEPT', state_imatch 'ESTABLISHED,RELATED' for qw/INPUT FORWARD/;
@@ -2596,7 +2752,7 @@ EOF
     emit '
 
     set_state "Stopped"
-    logger -p kern.info "$g_product Stopped"
+    mylogger kern.info "$g_product Stopped"
 
     case $COMMAND in
     stop|clear)

Shorewall/Perl/Shorewall/Nat.pm

@@ -69,6 +69,7 @@ sub process_one_masq1( $$$$$$$$$$$ )
     my $destnets = '';
     my $baserule = '';
     my $inlinematches = '';
+    my $prerule       = '';
     #
     # Leading '+'
     #
@@ -83,6 +84,13 @@ sub process_one_masq1( $$$$$$$$$$$ )
 	$inlinematches = get_inline_matches(0);
     }	
     #
+    # Handle early matches
+    #
+    if ( $inlinematches =~ s/s*\+// ) {
+	$prerule = $inlinematches;
+	$inlinematches = '';
+    }
+    #
     # Parse the remaining part of the INTERFACE column
     #
     if ( $family == F_IPV4 ) {
@@ -165,7 +173,9 @@ sub process_one_masq1( $$$$$$$$$$$ )
 
 	fatal_error "Unknown interface ($interface)" unless my $interfaceref = known_interface( $interface );
 
-	unless ( $interfaceref->{root} ) {
+	if ( $interfaceref->{root} ) {
+	    $interface = $interfaceref->{name} if $interface eq $interfaceref->{physical};
+	} else {
 	    $rule .= match_dest_dev( $interface );
 	    $interface = $interfaceref->{name};
 	}
@@ -336,7 +346,7 @@ sub process_one_masq1( $$$$$$$$$$$ )
 	#
 	expand_rule( $chainref ,
 		     POSTROUTE_RESTRICT ,
-		     '' ,
+		     $prerule ,
 		     $baserule . $inlinematches . $rule ,
 		     $networks ,
 		     $destnets ,
@@ -449,7 +459,9 @@ sub do_one_nat( $$$$$ )
 
     fatal_error "Unknown interface ($interface)" unless my $interfaceref = known_interface( $interface );
 
-    unless ( $interfaceref->{root} ) {
+    if ( $interfaceref->{root} ) {
+	$interface = $interfaceref->{name} if $interface eq $interfaceref->{physical};
+    } else {
 	$rulein  = match_source_dev $interface;
 	$ruleout = match_dest_dev $interface;
 	$interface = $interfaceref->{name};
@@ -551,7 +563,9 @@ sub setup_netmap() {
 		    $net1 = validate_net $net1, 0;
 		    $net2 = validate_net $net2, 0;
 
-		    unless ( $interfaceref->{root} ) {
+		    if ( $interfaceref->{root} ) {
+			$interface = $interfaceref->{name} if $interface eq $interfaceref->{physical};
+		    } else {
 			@rulein  = imatch_source_dev( $interface );
 			@ruleout = imatch_dest_dev( $interface );
 			$interface = $interfaceref->{name};

Shorewall/Perl/Shorewall/Providers.pm

@@ -125,6 +125,13 @@ sub setup_route_marking() {
     my $exmask = have_capability( 'EXMARK' ) ? "/$mask" : '';
 
     require_capability( $_ , q(The provider 'track' option) , 's' ) for qw/CONNMARK_MATCH CONNMARK/;
+    #
+    # Clear the mark -- we have seen cases where the mark is non-zero even in the raw table chains!
+    #
+
+    if ( $config{ZERO_MARKS} ) {
+	add_ijump( $mangle_table->{$_}, j => 'MARK', targetopts => '--set-mark 0' ) for qw/PREROUTING OUTPUT/;
+    }
 
     if ( $config{RESTORE_ROUTEMARKS} ) {
 	add_ijump $mangle_table->{$_} , j => 'CONNMARK', targetopts => "--restore-mark --mask $mask" for qw/PREROUTING OUTPUT/;
@@ -302,27 +309,14 @@ sub balance_default_route( $$$$ ) {
     emit '';
 
     if ( $first_default_route ) {
-	if ( $family == F_IPV4 ) {
-	    if ( $gateway ) {
-		emit "DEFAULT_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
-	    } else {
-		emit "DEFAULT_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
-	    }
+	if ( $gateway ) {
+	    emit "DEFAULT_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
 	} else {
-	    #
-	    # IPv6 doesn't support multi-hop routes
-	    #
-	    if ( $gateway ) {
-		emit "DEFAULT_ROUTE=\"via $gateway dev $interface $realm\"";
-	    } else {
-		emit "DEFAULT_ROUTE=\"dev $interface $realm\"";
-	    }
+	    emit "DEFAULT_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
 	}
 
 	$first_default_route = 0;
     } else {
-	fatal_error "Only one 'balance' provider is allowed with IPv6" if $family == F_IPV6;
-
 	if ( $gateway ) {
 	    emit "DEFAULT_ROUTE=\"\$DEFAULT_ROUTE nexthop via $gateway dev $interface weight $weight $realm\"";
 	} else {
@@ -339,27 +333,14 @@ sub balance_fallback_route( $$$$ ) {
     emit '';
 
     if ( $first_fallback_route ) {
-	if ( $family == F_IPV4 ) {
-	    if ( $gateway ) {
-		emit "FALLBACK_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
-	    } else {
-		emit "FALLBACK_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
-	    }
+	if ( $gateway ) {
+	    emit "FALLBACK_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
 	} else {
-	    #
-	    # IPv6 doesn't support multi-hop routes
-	    #
-	    if ( $gateway ) {
-		emit "FALLBACK_ROUTE=\"via $gateway dev $interface $realm\"";
-	    } else {
-		emit "FALLBACK_ROUTE=\"dev $interface $realm\"";
-	    }
+	    emit "FALLBACK_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
 	}
 
 	$first_fallback_route = 0;
     } else {
-	fatal_error "Only one 'fallback' provider is allowed with IPv6" if $family == F_IPV6;
-
 	if ( $gateway ) {
 	    emit "FALLBACK_ROUTE=\"\$FALLBACK_ROUTE nexthop via $gateway dev $interface weight $weight $realm\"";
 	} else {
@@ -392,7 +373,7 @@ sub start_provider( $$$$$ ) {
 }
 
 #
-# Look up a provider and return it's number. If unknown provider, 0 is returned
+# Look up a provider and return a reference to its table entry. If unknown provider, undef is returned
 #
 sub lookup_provider( $ ) {
     my $provider    = $_[0];
@@ -408,7 +389,7 @@ sub lookup_provider( $ ) {
 	}
     }
 
-    $providerref ? $providerref->{number} : 0;
+    $providerref;
 }
 
 #
@@ -481,17 +462,22 @@ sub process_a_provider( $ ) {
 	$interface = $interfaceref->{name} unless $interfaceref->{wildcard};
     } 
 
-    my $gatewaycase = '';
-
     if ( $physical =~ /\+$/ ) {
 	return 0 if $pseudo;
 	fatal_error "Wildcard interfaces ($physical) may not be used as provider interfaces";
     }
 
-    if ( $gateway eq 'detect' ) {
+    my $gatewaycase = '';
+    my $gw;
+
+    if ( ( $gw = lc $gateway ) eq 'detect' ) {
 	fatal_error "Configuring multiple providers through one interface requires an explicit gateway" if $shared;
 	$gateway = get_interface_gateway $interface;
 	$gatewaycase = 'detect';
+    } elsif ( $gw eq 'none' ) {
+	fatal_error "Configuring multiple providers through one interface requires a gateway" if $shared;
+	$gatewaycase = 'none';
+	$gateway = '';
     } elsif ( $gateway && $gateway ne '-' ) {
 	( $gateway, $mac ) = split_host_list( $gateway, 0 );
 	validate_address $gateway, 0;
@@ -506,7 +492,7 @@ sub process_a_provider( $ ) {
 
 	$gatewaycase = 'specified';
     } else {
-	$gatewaycase = 'none';
+	$gatewaycase = 'omitted';
 	fatal_error "Configuring multiple providers through one interface requires a gateway" if $shared;
 	$gateway = '';
     }
@@ -529,10 +515,11 @@ sub process_a_provider( $ ) {
 	    } elsif ( $option eq 'notrack' ) {
 		$track = 0;
 	    } elsif ( $option =~ /^balance=(\d+)$/ ) {
-		fatal_error q('balance=<weight>' is not available in IPv6) if $family == F_IPV6;
+		fatal_error q('balance' may not be spacified when GATEWAY is 'none') if $gatewaycase eq 'none';
 		fatal_error 'The balance setting must be non-zero' unless $1;
 		$balance = $1;
 	    } elsif ( $option eq 'balance' || $option eq 'primary') {
+		fatal_error qq('$option' may not be spacified when GATEWAY is 'none') if $gatewaycase eq 'none';
 		$balance = 1;
 	    } elsif ( $option eq 'loose' ) {
 		$loose   = 1;
@@ -550,11 +537,12 @@ sub process_a_provider( $ ) {
 	    } elsif ( $option =~ /^mtu=(\d+)$/ ) {
 		$mtu = "mtu $1 ";
 	    } elsif ( $option =~ /^fallback=(\d+)$/ ) {
-		fatal_error q('fallback=<weight>' is not available in IPv6) if $family == F_IPV6;
+		fatal_error q('fallback' may not be spacified when GATEWAY is 'none') if $gatewaycase eq 'none';
 		$default = $1;
 		$default_balance = 0;
 		fatal_error 'fallback must be non-zero' unless $default;
 	    } elsif ( $option eq 'fallback' ) {
+		fatal_error q('fallback' may not be spacified when GATEWAY is 'none') if $gatewaycase eq 'none';
 		$default = -1;
 		$default_balance = 0;
 	    } elsif ( $option eq 'local' ) {
@@ -567,6 +555,7 @@ sub process_a_provider( $ ) {
 		$track  = 0           if $config{TRACK_PROVIDERS};
 		$default_balance = 0  if $config{USE_DEFAULT_RT};
 	    } elsif ( $option =~ /^load=(0?\.\d{1,8})/ ) {
+		fatal_error q('fallback' may not be spacified when GATEWAY is 'none') if $gatewaycase eq 'none';
 		$load = sprintf "%1.8f", $1;
 		require_capability 'STATISTIC_MATCH', "load=$1", 's';
 	    } elsif ( $option eq 'autosrc' ) {
@@ -596,13 +585,13 @@ sub process_a_provider( $ ) {
     fatal_error "A provider interface must have at least one associated zone" unless $tproxy || %{interface_zones($interface)};
 
     if ( $local ) {
-	fatal_error "GATEWAY not valid with 'local' provider"  unless $gatewaycase eq 'none';
+	fatal_error "GATEWAY not valid with 'local' provider"  unless $gatewaycase eq 'omitted';
 	fatal_error "'track' not valid with 'local'"           if $track;
 	fatal_error "DUPLICATE not valid with 'local'"         if $duplicate ne '-';
 	fatal_error "'persistent' is not valid with 'local"    if $persistent;
     } elsif ( $tproxy ) {
 	fatal_error "Only one 'tproxy' provider is allowed"    if $tproxies++;
-	fatal_error "GATEWAY not valid with 'tproxy' provider" unless $gatewaycase eq 'none';
+	fatal_error "GATEWAY not valid with 'tproxy' provider" unless $gatewaycase eq 'omitted';
 	fatal_error "'track' not valid with 'tproxy'"          if $track;
 	fatal_error "DUPLICATE not valid with 'tproxy'"        if $duplicate ne '-';
 	fatal_error "MARK not allowed with 'tproxy'"           if $mark ne '-';
@@ -649,14 +638,16 @@ sub process_a_provider( $ ) {
 	warning_message q(The 'proxyndp' option is dangerous when specified on a Provider interface) if get_interface_option( $interface, 'proxyndp' );
     }
 
-    $balance = $default_balance unless $balance;
+    $balance = $default_balance unless $balance || $gatewaycase eq 'none';
 
     fatal_error "Interface $interface is already associated with non-shared provider $provider_interfaces{$interface}" if $provider_interfaces{$interface};
 
     if ( $duplicate ne '-' ) {
 	fatal_error "The DUPLICATE column must be empty when USE_DEFAULT_RT=Yes" if $config{USE_DEFAULT_RT};
 	my $p = lookup_provider( $duplicate );
-	warning_message "Unknown routing table ($duplicate)" unless $p && ( $p == MAIN_TABLE || $p < BALANCE_TABLE );
+	my $n = $p ? $p->{number} : 0;
+	warning_message "Unknown routing table ($duplicate)" unless $n && ( $n == MAIN_TABLE || $n < BALANCE_TABLE );
+	warning_message "An optional provider ($duplicate) is listed in the DUPLICATE column - enable and disable will not work correctly on that provider" if $p && $p->{optional};
     } elsif ( $copy ne '-' ) {
 	fatal_error "The COPY column must be empty when USE_DEFAULT_RT=Yes" if $config{USE_DEFAULT_RT};
 	fatal_error 'A non-empty COPY column requires that a routing table be specified in the DUPLICATE column' unless $copy eq 'none';
@@ -674,6 +665,7 @@ sub process_a_provider( $ ) {
 			   interface         => $interface ,
 			   physical          => $physical ,
 			   optional          => $optional ,
+			   wildcard          => $interfaceref->{wildcard} || 0,
 			   gateway           => $gateway ,
 			   gatewaycase       => $gatewaycase ,
 			   shared            => $shared ,
@@ -789,7 +781,11 @@ sub add_a_provider( $$ ) {
 
 	push_indent;
 
-	if ( $gatewaycase eq 'none' ) {
+	emit( "if interface_is_up $physical; then" );
+
+	push_indent;
+
+	if ( $gatewaycase eq 'omitted' ) {
 	    if ( $tproxy ) {
 		emit 'run_ip route add local ' . ALLIP . " dev $physical table $id";
 	    } else {
@@ -803,27 +799,24 @@ sub add_a_provider( $$ ) {
 	    emit( qq([ -z "$address" ] && return\n) );
 
 	    if ( $hostroute ) {
-		if ( $family == F_IPV4 ) {
-		    emit qq(run_ip route replace $gateway src $address dev $physical ${mtu});
-		    emit qq(run_ip route replace $gateway src $address dev $physical ${mtu}table $id $realm);
-		} else {
-		    emit qq(qt \$IP -6 route add $gateway src $address dev $physical ${mtu});
-		    emit qq(qt \$IP -6 route del $gateway src $address dev $physical ${mtu}table $id $realm);
-		    emit qq(run_ip route add $gateway src $address dev $physical ${mtu}table $id $realm);
-		}
+		emit qq(run_ip route replace $gateway src $address dev $physical ${mtu});
+		emit qq(run_ip route replace $gateway src $address dev $physical ${mtu}table $id $realm);
+		emit qq(echo "\$IP route del $gateway src $address dev $physical ${mtu} > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing);
+		emit qq(echo "\$IP route del $gateway src $address dev $physical ${mtu}table $id $realm > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing);
 	    }
 
-	    emit "run_ip route add default via $gateway src $address dev $physical ${mtu}table $id $realm";
+	    emit( "run_ip route add default via $gateway src $address dev $physical ${mtu}table $id $realm" );
+	    emit( qq( echo "\$IP route del default via $gateway src $address dev $physical ${mtu}table $id $realm > /dev/null 2>&1"  >> \${VARDIR}/undo_${table}_routing) );
 	}
 
 	if ( ! $noautosrc ) {
 	    if ( $shared ) {
-		emit  "qt \$IP -$family rule del from $address" if $config{DELETE_THEN_ADD};
+		emit  "qt \$IP -$family rule del from $address";
 		emit( "run_ip rule add from $address pref 20000 table $id" ,
 		      "echo \"\$IP -$family rule del from $address pref 20000> /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing" );
 	    } else {
 		emit  ( "find_interface_addresses $physical | while read address; do" );
-		emit  ( "    qt \$IP -$family rule del from \$address" ) if $config{DELETE_THEN_ADD};
+		emit  ( "    qt \$IP -$family rule del from \$address" );
 		emit  ( "    run_ip rule add from \$address pref 20000 table $id",
 			"    echo \"\$IP -$family rule del from \$address pref 20000 > /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing",
 			'    rulenum=$(($rulenum + 1))',
@@ -842,8 +835,10 @@ sub add_a_provider( $$ ) {
 	    }
 	}
 
-	emit( qq(\n),
-	      qq(rm -f \${VARDIR}/${physical}_enabled) );
+	pop_indent;
+
+	emit( qq(fi\n),
+	      qq(echo 1 > \${VARDIR}/${physical}_disabled) );
 
 
 	pop_indent;
@@ -867,7 +862,7 @@ sub add_a_provider( $$ ) {
 	}
 	$provider_interfaces{$interface} = $table;
 
-	if ( $gatewaycase eq 'none' ) {
+	if ( $gatewaycase eq 'omitted' ) {
 	    if ( $tproxy ) {
 		emit 'run_ip route add local ' . ALLIP . " dev $physical table $id";
 	    } else {
@@ -907,7 +902,7 @@ CEOF
 
 	emit ( "run_ip rule add fwmark ${hexmark}${mask} pref $pref table $id",
 	       "echo \"\$IP -$family rule del fwmark ${hexmark}${mask} > /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing"
-	     );
+	    );
     }
 
     if ( $duplicate ne '-' ) {
@@ -928,14 +923,8 @@ CEOF
 	$address = get_interface_address $interface unless $address;
 
 	if ( $hostroute ) {
-	    if ( $family == F_IPV4 ) {
-		emit qq(run_ip route replace $gateway src $address dev $physical ${mtu});
-		emit qq(run_ip route replace $gateway src $address dev $physical ${mtu}table $id $realm);
-	    } else {
-		emit qq(qt \$IP -6 route add $gateway src $address dev $physical ${mtu});
-		emit qq(qt \$IP -6 route del $gateway src $address dev $physical ${mtu}table $id $realm);
-		emit qq(run_ip route add $gateway src $address dev $physical ${mtu}table $id $realm);
-	    }
+	    emit qq(run_ip route replace $gateway src $address dev $physical ${mtu});
+	    emit qq(run_ip route replace $gateway src $address dev $physical ${mtu}table $id $realm);
 	}
 
 	emit "run_ip route add default via $gateway src $address dev $physical ${mtu}table $id $realm";
@@ -949,13 +938,8 @@ CEOF
 	my $id = $providers{default}->{id};
 	emit '';
 	if ( $gateway ) {
-	    if ( $family == F_IPV4 ) {
-		emit qq(run_ip route replace $gateway/32 dev $physical table $id) if $hostroute;
-		emit qq(run_ip route add default via $gateway src $address dev $physical table $id metric $number);
-	    } else {
-		emit qq(qt \$IP -6 route del default via $gateway src $address dev $physical table $id metric $number);
-		emit qq(run_ip route add default via $gateway src $address dev $physical table $id metric $number);
-	    }
+	    emit qq(run_ip route replace $gateway/32 dev $physical table $id) if $hostroute;
+	    emit qq(run_ip route add default via $gateway src $address dev $physical table $id metric $number);
 	    emit qq(echo "\$IP -$family route del default via $gateway table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing);
 	    emit qq(echo "\$IP -4 route del $gateway/32 dev $physical table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing) if $family == F_IPV4;
 	} else {
@@ -983,12 +967,19 @@ CEOF
 	    }
 	} elsif ( ! $noautosrc ) {
 	    if ( $shared ) {
-		emit  "qt \$IP -$family rule del from $address" if $config{DELETE_THEN_ADD};
-		emit( "run_ip rule add from $address pref 20000 table $id" ,
-		      "echo \"\$IP -$family rule del from $address pref 20000> /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing" );
+		if ( $persistent ) {
+		    emit( qq(if ! egrep -q "^2000:[[:space:]]+from $address lookup $id"; then),
+			  qq(    run_ip rule add from $address pref 20000 table $id),
+			  qq(    echo "\$IP -$family rule del from $address pref 20000> /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing ),
+			  qq(fi) );
+		} else {
+		    emit  "qt \$IP -$family rule del from $address" if $config{DELETE_THEN_ADD};
+		    emit( "run_ip rule add from $address pref 20000 table $id" ,
+			  "echo \"\$IP -$family rule del from $address pref 20000> /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing" );
+		}
 	    } elsif ( ! $pseudo ) {
 		emit  ( "find_interface_addresses $physical | while read address; do" );
-		emit  ( "    qt \$IP -$family rule del from \$address" ) if $config{DELETE_THEN_ADD};
+		emit  ( "    qt \$IP -$family rule del from \$address" ) if $persistent || $config{DELETE_THEN_ADD};
 		emit  ( "    run_ip rule add from \$address pref 20000 table $id",
 			"    echo \"\$IP -$family rule del from \$address pref 20000 > /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing",
 			'    rulenum=$(($rulenum + 1))',
@@ -1024,23 +1015,12 @@ CEOF
 	    $tbl    = $providers{$default ? 'default' : $config{USE_DEFAULT_RT} ? 'balance' : 'main'}->{id};
 	    $weight = $balance ? $balance : $default;
 
-	    if ( $family == F_IPV4 ) {
-		if ( $gateway ) {
-		    emit qq(add_gateway "nexthop via $gateway dev $physical weight $weight $realm" ) . $tbl;
-		} else {
-		    emit qq(add_gateway "nexthop dev $physical weight $weight $realm" ) . $tbl;
-		}
+	    if ( $gateway ) {
+		emit qq(add_gateway "nexthop via $gateway dev $physical weight $weight $realm" ) . $tbl;
 	    } else {
-		#
-		# IPv6 doesn't support multi-hop routes
-		#
-		if ( $gateway ) {
-		    emit qq(add_gateway "via $gateway dev $physical $realm" ) . $tbl;
-		} else {
-		    emit qq(add_gateway "dev $physical $realm" ) . $tbl;
-		}
+		emit qq(add_gateway "nexthop dev $physical weight $weight $realm" ) . $tbl;
 	    }
-	    	} else {
+	} else {
 	    $weight = 1;
 	}
 
@@ -1050,7 +1030,7 @@ CEOF
 	    emit( "setup_${dev}_tc" ) if $tcdevices->{$interface};
 	}
 
-	emit( qq(    echo 1 > \${VARDIR}/${physical}_enabled) ) if $persistent;
+	emit( qq(rm -f \${VARDIR}/${physical}_disabled) );
 	emit_started_message( '', 2, $pseudo, $table, $number );
 
 	pop_indent;
@@ -1058,7 +1038,7 @@ CEOF
 	unless ( $pseudo ) {
 	    emit( 'else' );
 	    emit( qq(    echo $weight > \${VARDIR}/${physical}_weight) );
-	    emit( qq(    echo 1 > \${VARDIR}/${physical}_enabled) ) if $persistent;
+	    emit( qq(    rm -f \${VARDIR}/${physical}_disabled) ) if $persistent;
 	    emit_started_message( '    ', '', $pseudo, $table, $number );
 	}
 
@@ -1077,7 +1057,7 @@ CEOF
 
     if ( $optional ) {
 	if ( $persistent ) {
-	    emit( "persistent_${what}_${table}\n" );
+	    emit( "do_persistent_${what}_${table}\n" );
 	}
 
 	if ( $shared ) {
@@ -1130,7 +1110,7 @@ CEOF
 		$via = "dev $physical";
 	    }
 
-	    $via .= " weight $weight" unless $weight < 0 or $family == F_IPV6; # IPv6 doesn't support route weights
+	    $via .= " weight $weight" unless $weight < 0;
 	    $via .= " $realm"         if $realm;
 
 	    emit( qq(delete_gateway "$via" $tbl $physical) );
@@ -1152,7 +1132,7 @@ CEOF
 		   'if [ $COMMAND = disable ]; then',
 		   "    do_persistent_${what}_${table}",
 		   "else",
-		   "    rm -f \${VARDIR}/${physical}_enabled\n",
+		   "    echo 1 > \${VARDIR}/${physical}_disabled\n",
 		   "fi\n",
 		 );
 	}
@@ -1273,7 +1253,7 @@ sub add_an_rtrule1( $$$$$ ) {
     push @{$providerref->{rules}}, "run_ip rule add $source ${dest}${mark} $priority table $id";
 
     if ( $persistent ) {
-	push @{$providerref->{persistent_rules}}, "qt \$IP -$family rule del $source ${dest}${mark} $priority" if $config{DELETE_THEN_ADD};
+	push @{$providerref->{persistent_rules}}, "qt \$IP -$family rule del $source ${dest}${mark} $priority";
 	push @{$providerref->{persistent_rules}}, "run_ip rule add $source ${dest}${mark} $priority table $id";
     }
 
@@ -1479,12 +1459,7 @@ sub finish_providers() {
 
     if ( $balancing ) {
 	emit  ( 'if [ -n "$DEFAULT_ROUTE" ]; then' );
-	if ( $family == F_IPV4 ) {
-	    emit  ( "    run_ip route replace default scope global table $table \$DEFAULT_ROUTE" );
-	} else {
-	    emit  ( "    qt \$IP -6 route del default scope global table $table \$DEFAULT_ROUTE" );
-	    emit  ( "    run_ip route add default scope global table $table \$DEFAULT_ROUTE" );
-	}
+	emit  ( "    run_ip route replace default scope global table $table \$DEFAULT_ROUTE" );
 
 	if ( $config{USE_DEFAULT_RT} ) {
 	    emit  ( "    while qt \$IP -$family route del default table $main; do",
@@ -1537,12 +1512,7 @@ sub finish_providers() {
 
     if ( $fallback ) {
 	emit  ( 'if [ -n "$FALLBACK_ROUTE" ]; then' );
-	if ( $family == F_IPV4 ) {
-	    emit( "    run_ip route replace default scope global table $default \$FALLBACK_ROUTE" );
-	} else {
-	    emit( "    qt \$IP -6 route del default scope global table $default \$FALLBACK_ROUTE" );
-	    emit( "    run_ip route add default scope global table $default \$FALLBACK_ROUTE" );
-	}
+	emit( "    run_ip route replace default scope global table $default \$FALLBACK_ROUTE" );
 
 	emit( "    progress_message \"Fallback route '\$(echo \$FALLBACK_ROUTE | sed 's/\$\\s*//')' Added\"",
 	      'else',
@@ -1657,7 +1627,7 @@ EOF
 		emit ( "    if [ ! -f \${VARDIR}/undo_${provider}_routing ]; then",
 		       "        start_interface_$provider" );
 	    } elsif ( $providerref->{persistent} ) {
-		emit ( "    if [ ! -f \${VARDIR}/$providerref->{physical}_enabled ]; then",
+		emit ( "    if [ -f \${VARDIR}/$providerref->{physical}_disabled ]; then",
 		       "        start_provider_$provider" );
 	    } else {
 		emit ( "    if [ -z \"`\$IP -$family route ls table $providerref->{number}`\" ]; then",
@@ -1708,7 +1678,7 @@ EOF
 	    if ( $providerref->{pseudo} ) {
 		emit( "    if [ -f \${VARDIR}/undo_${provider}_routing ]; then" );
 	    } elsif ( $providerref->{persistent} ) {
-		emit( "    if [ -f \${VARDIR}/$providerref->{physical}_enabled ]; then" );
+		emit( "    if [ ! -f \${VARDIR}/$providerref->{physical}_disabled ]; then" );
 	    } else {
 		emit( "    if [ -n \"`\$IP -$family route ls table $providerref->{number}`\" ]; then" );
 	    }
@@ -2094,9 +2064,31 @@ sub provider_realm( $ ) {
 #
 sub handle_optional_interfaces( $ ) {
 
-    my ( $interfaces, $wildcards )  = find_interfaces_by_option1 'optional';
+    my @interfaces;
+    my $wildcards;
 
-    if ( @$interfaces ) {
+    #
+    # First do the provider interfacess. Those that are real providers will never have wildcard physical
+    # names but they might derive from wildcard interface entries. Optional interfaces which do not have
+    # wildcard physical names are also included in the providers table.
+    #
+    for my $providerref ( grep $_->{optional} , sort { $a->{number} <=> $b->{number} } values %providers ) {
+	push @interfaces, $providerref->{interface};
+	$wildcards ||= $providerref->{wildcard};
+    }
+
+    #
+    # Now do the optional wild interfaces
+    #
+    for my $interface ( grep interface_is_optional($_) && ! $provider_interfaces{$_}, all_real_interfaces ) {
+	push@interfaces, $interface;
+	unless ( $wildcards ) {
+	    my $interfaceref = find_interface($interface);
+	    $wildcards = 1 if $interfaceref->{wildcard};
+	}
+    }
+
+    if ( @interfaces ) {
 	my $require     = $config{REQUIRE_INTERFACE};
 	my $gencase     = shift;
 
@@ -2107,7 +2099,7 @@ sub handle_optional_interfaces( $ ) {
 	#
 	# Clear the '_IS_USABLE' variables
 	#
-	emit( join( '_', 'SW', uc var_base( get_physical( $_ ) ) , 'IS_USABLE=' ) ) for @$interfaces;
+	emit( join( '_', 'SW', uc var_base( get_physical( $_ ) ) , 'IS_USABLE=' ) ) for @interfaces;
 
 	if ( $wildcards ) {
 	    #
@@ -2124,74 +2116,76 @@ sub handle_optional_interfaces( $ ) {
 	    emit '';
 	}
 
-	for my $interface ( grep $provider_interfaces{$_}, @$interfaces ) {
-	    my $provider    = $provider_interfaces{$interface};
-	    my $physical    = get_physical $interface;
-	    my $base        = uc var_base( $physical );
-	    my $providerref = $providers{$provider};
+	for my $interface ( @interfaces ) {
+	    if ( my $provider = $provider_interfaces{ $interface } ) {
+		my $physical     = get_physical $interface;
+		my $base         = uc var_base( $physical );
+		my $providerref  = $providers{$provider};
+		my $interfaceref = known_interface( $interface );
+		my $wildbase     = uc $interfaceref->{base};
 
-	    emit( "$physical)" ), push_indent if $wildcards;
+		emit( "$physical)" ), push_indent if $wildcards;
 
-	    if ( $provider eq $physical ) {
-		#
-		# Just an optional interface, or provider and interface are the same
-		#
-		emit qq(if [ -z "\$interface" -o "\$interface" = "$physical" ]; then);
-	    } else {
-		#
-		# Provider
-		#
-		emit qq(if [ -z "\$interface" -o "\$interface" = "$physical" ]; then);
-	    }
+		if ( $provider eq $physical ) {
+		    #
+		    # Just an optional interface, or provider and interface are the same
+		    #
+		    emit qq(if [ -z "\$interface" -o "\$interface" = "$physical" ]; then);
+		} else {
+		    #
+		    # Provider
+		    #
+		    emit qq(if [ -z "\$interface" -o "\$interface" = "$physical" ]; then);
+		}
 
-	    push_indent;
-	    if ( $providerref->{gatewaycase} eq 'detect' ) {
-		emit qq(if interface_is_usable $physical && [ -n "$providerref->{gateway}" ]; then);
-	    } else {
-		emit qq(if interface_is_usable $physical; then);
-	    }
-
-	    emit( '    HAVE_INTERFACE=Yes' ) if $require;
-
-	    emit( "    SW_${base}_IS_USABLE=Yes" ,
-		  'fi' );
-
-	    pop_indent;
-
-	    emit( "fi\n" );
-
-	    emit( ';;' ), pop_indent if $wildcards;
-	}
-
-	for my $interface ( grep ! $provider_interfaces{$_}, @$interfaces ) {
-	    my $physical    = get_physical $interface;
-	    my $base        = uc var_base( $physical );
-	    my $case        = $physical;
-	    my $wild        = $case =~ s/\+$/*/;
-
-	    if ( $wildcards ) {
-		emit( "$case)" );
 		push_indent;
+		if ( $providerref->{gatewaycase} eq 'detect' ) {
+		    emit qq(if interface_is_usable $physical && [ -n "$providerref->{gateway}" ]; then);
+		} else {
+		    emit qq(if interface_is_usable $physical; then);
+		}
 
-		if ( $wild ) {
-		    emit( qq(if [ -z "\$SW_${base}_IS_USABLE" ]; then) );
+		emit( '    HAVE_INTERFACE=Yes' ) if $require;
+
+		emit( "    SW_${base}_IS_USABLE=Yes" );
+		emit( "    SW_${wildbase}_IS_USABLE=Yes" ) if $interfaceref->{wildcard};
+		emit( 'fi' );
+
+		pop_indent;
+
+		emit( "fi\n" );
+
+		emit( ';;' ), pop_indent if $wildcards;
+	    } else {
+		my $physical    = get_physical $interface;
+		my $base        = uc var_base( $physical );
+		my $case        = $physical;
+		my $wild        = $case =~ s/\+$/*/;
+
+		if ( $wildcards ) {
+		    emit( "$case)" );
 		    push_indent;
-		    emit ( 'if interface_is_usable $interface; then' );
+
+		    if ( $wild ) {
+			emit( qq(if [ -z "\$SW_${base}_IS_USABLE" ]; then) );
+			push_indent;
+			emit ( 'if interface_is_usable $interface; then' );
+		    } else {
+			emit ( "if interface_is_usable $physical; then" );
+		    }
 		} else {
 		    emit ( "if interface_is_usable $physical; then" );
 		}
-	    } else {
-		emit ( "if interface_is_usable $physical; then" );
-	    }
 
-	    emit ( '    HAVE_INTERFACE=Yes' ) if $require;
-	    emit ( "    SW_${base}_IS_USABLE=Yes" ,
-		   'fi' );
+		emit ( '    HAVE_INTERFACE=Yes' ) if $require;
+		emit ( "    SW_${base}_IS_USABLE=Yes" ,
+		       'fi' );
 
-	    if ( $wildcards ) {
-		pop_indent, emit( 'fi' ) if $wild;
-		emit( ';;' );
-		pop_indent;
+		if ( $wildcards ) {
+		    pop_indent, emit( 'fi' ) if $wild;
+		    emit( ';;' );
+		    pop_indent;
+		}
 	    }
 	}
 

Shorewall/Perl/Shorewall/Raw.pm

@@ -368,12 +368,19 @@ sub setup_conntrack($) {
     if ( $convert ) {
 	my $conntrack;
 	my $empty  = 1;
-	my $date = localtime;
+	my $date = compiletime;
+	my $fn1 = find_writable_file 'conntrack';
 
-	if ( $fn ) {
-	    open $conntrack, '>>', $fn or fatal_error "Unable to open $fn for notrack conversion: $!";
+	$fn = open_file( 'notrack' , 3, 1 ) || fatal_error "Unable to open the notrack file for conversion: $!";
+
+	if ( -f $fn1 ) {
+	    open $conntrack, '>>', $fn1 or fatal_error "Unable to open $fn for notrack conversion: $!";
 	} else {
-	    open $conntrack, '>', $fn = find_file 'conntrack' or fatal_error "Unable to open $fn for notrack conversion: $!";
+	    open $conntrack, '>' , $fn1 or fatal_error "Unable to open $fn for notrack conversion: $!";
+	    #
+	    # Transfer permissions from the existing notrack file
+	    #
+	    transfer_permissions( $fn, $fn1 );
 
 	    print $conntrack <<'EOF';
 #
@@ -396,8 +403,6 @@ EOF
 	       "# Rules generated from notrack file $fn by Shorewall $globals{VERSION} - $date\n" ,
 	       "#\n" );
 
-	$fn = open_file( 'notrack' , 3, 1 ) || fatal_error "Unable to open the notrack file for conversion: $!";
-
 	while ( read_a_line( PLAIN_READ ) ) {
 	    #
 	    # Don't copy the header comments from the old notrack file

Shorewall/Perl/Shorewall/Zones.pm

@@ -82,6 +82,7 @@ our @EXPORT = ( qw( NOTHING
 		    find_interface
 		    known_interface
 		    get_physical
+		    get_logical
 		    physical_name
 		    have_bridges
 		    port_to_bridge
@@ -102,7 +103,6 @@ our @EXPORT = ( qw( NOTHING
 		    find_hosts_by_option
 		    find_zone_hosts_by_option
 		    find_zones_by_option
-		    all_ipsets
 		    have_ipsec
 		 ),
 	      );
@@ -209,8 +209,6 @@ our @interfaces;
 our %interfaces;
 our %roots;
 our @bport_zones;
-our %ipsets;
-our %physical;
 our %basemap;
 our %basemap1;
 our %mapbase;
@@ -326,8 +324,6 @@ sub initialize( $$ ) {
     %roots = ();
     %interfaces = ();
     @bport_zones = ();
-    %ipsets = ();
-    %physical = ();
     %basemap = ();
     %basemap1 = ();
     %mapbase = ();
@@ -341,6 +337,7 @@ sub initialize( $$ ) {
 				  arp_ignore  => ENUM_IF_OPTION,
 				  blacklist   => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				  bridge      => SIMPLE_IF_OPTION,
+				  dbl         => ENUM_IF_OPTION,
 				  destonly    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				  detectnets  => OBSOLETE_IF_OPTION,
 				  dhcp        => SIMPLE_IF_OPTION,
@@ -349,6 +346,7 @@ sub initialize( $$ ) {
 				  logmartians => BINARY_IF_OPTION,
 				  loopback    => BINARY_IF_OPTION,
 				  nets        => IPLIST_IF_OPTION + IF_OPTION_ZONEONLY + IF_OPTION_VSERVER,
+				  nodbl       => SIMPLE_IF_OPTION,
 				  norfc1918   => OBSOLETE_IF_OPTION,
 				  nosmurfs    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				  optional    => SIMPLE_IF_OPTION,
@@ -390,12 +388,14 @@ sub initialize( $$ ) {
 	%validinterfaceoptions = (  accept_ra   => NUMERIC_IF_OPTION,
 				    blacklist   => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    bridge      => SIMPLE_IF_OPTION,
+				    dbl         => ENUM_IF_OPTION,
 				    destonly    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    dhcp        => SIMPLE_IF_OPTION,
 				    ignore      => NUMERIC_IF_OPTION + IF_OPTION_WILDOK,
 				    loopback    => BINARY_IF_OPTION,
 				    maclist     => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    nets        => IPLIST_IF_OPTION + IF_OPTION_ZONEONLY + IF_OPTION_VSERVER,
+				    nodbl       => SIMPLE_IF_OPTION,
 				    nosmurfs    => SIMPLE_IF_OPTION + IF_OPTION_HOST,
 				    optional    => SIMPLE_IF_OPTION,
 				    optional    => SIMPLE_IF_OPTION,
@@ -1119,6 +1119,8 @@ sub process_interface( $$ ) {
 
     my ($interface, $port, $extra) = split /:/ , $originalinterface, 3;
 
+    fatal_error "Invalid interface name ($interface)" if $interface =~ /[()\[\]\*\?%]/;
+
     fatal_error "Invalid INTERFACE ($originalinterface)" if ! $interface || defined $extra;
 
     if ( supplied $port ) {
@@ -1193,6 +1195,7 @@ sub process_interface( $$ ) {
     my %options;
 
     $options{port} = 1 if $port;
+    $options{dbl}  = $config{DYNAMIC_BLACKLIST} =~ /^ipset(-only)?.*,src-dst/ ? '1:2' : $config{DYNAMIC_BLACKLIST} ? '1:0' : '0:0';
 
     my $hostoptionsref = {};
 
@@ -1236,6 +1239,8 @@ sub process_interface( $$ ) {
 		    } else {
 			warning_message "The 'blacklist' option is ignored on multi-zone interfaces";
 		    }
+		} elsif ( $option eq 'nodbl' ) {
+		    $options{dbl} = '0:0';
 		} else {
 		    $options{$option} = 1;
 		    $hostoptions{$option} = 1 if $hostopt;
@@ -1258,6 +1263,11 @@ sub process_interface( $$ ) {
 		    } else {
 			$options{arp_ignore} = 1;
 		    }
+		} elsif ( $option eq 'dbl' ) {
+		    my %values = ( none => '0:0', src => '1:0', dst => '2:0', 'src-dst' => '1:2' );
+
+		    fatal_error q(The 'dbl' option requires a value) unless defined $value;
+		    fatal_error qq(Invalid setting ($value) for 'dbl') unless defined ( $options{dbl} = $values{$value} );
 		} else {
 		    assert( 0 );
 		}
@@ -1281,7 +1291,7 @@ sub process_interface( $$ ) {
 		    fatal_error q("nets=" may not be specified for a multi-zone interface) unless $zone;
 		    fatal_error "Duplicate $option option" if $netsref;
 		    if ( $value eq 'dynamic' ) {
-			require_capability( 'IPSET_MATCH', 'Dynamic nets', '');
+			require_capability( 'IPSET_V5', 'Dynamic nets', '');
 			$hostoptions{dynamic} = 1;
 			#
 			# Defer remaining processing until we have the final physical interface name
@@ -1308,10 +1318,10 @@ sub process_interface( $$ ) {
 		fatal_error "The '$option' option requires a value" unless defined $value;
 
 		if ( $option eq 'physical' ) {
-		    fatal_error "Invalid Physical interface name ($value)" unless $value && $value !~ /%/;
+		    fatal_error "Invalid interface name ($interface)" if $interface =~ /[()\[\]\*\?%]/;
 		    fatal_error "Virtual interfaces ($value) are not supported" if $value =~ /:\d+$/;
 
-		    fatal_error "Duplicate physical interface name ($value)" if ( $physical{$value} && ! $port );
+		    fatal_error "Duplicate physical interface name ($value)" if ( $interfaces{$value} && ! $port );
 
 		    fatal_error "The type of 'physical' name ($value) doesn't match the type of interface name ($interface)" if $wildcard && ! $value =~ /\+$/;
 		    $physical = $value;
@@ -1345,7 +1355,7 @@ sub process_interface( $$ ) {
 	    my $ipset = $family == F_IPV4 ? "${zone}" : "6_${zone}";
 	    $ipset = join( '_', $ipset, var_base1( $physical ) ) unless $zoneref->{options}{in_out}{dynamic_shared};	    
 	    $netsref = [ "+$ipset" ];
-	    $ipsets{$ipset} = 1;
+	    add_ipset($ipset);
 	}
 
 	if ( $options{bridge} ) {
@@ -1385,21 +1395,23 @@ sub process_interface( $$ ) {
 	$options{tcpflags} = $hostoptionsref->{tcpflags} = 1 unless exists $options{tcpflags};
     }
 
-    $physical{$physical} = $interfaces{$interface} = { name       => $interface ,
-						       bridge     => $bridge ,
-						       filter     => $filterref ,
-						       nets       => 0 ,
-						       number     => $nextinum ,
-						       root       => $root ,
-						       broadcasts => $broadcasts ,
-						       options    => \%options ,
-						       zone       => '',
-						       physical   => $physical ,
-						       base       => var_base( $physical ),
-						       zones      => {},
-						       origin     => shortlineinfo( '' ),
-						       wildcard   => $wildcard,
-						     };
+    my $interfaceref = $interfaces{$interface} = { name       => $interface ,
+						   bridge     => $bridge ,
+						   filter     => $filterref ,
+						   nets       => 0 ,
+						   number     => $nextinum ,
+						   root       => $root ,
+						   broadcasts => $broadcasts ,
+						   options    => \%options ,
+						   zone       => '',
+						   physical   => $physical ,
+						   base       => var_base( $physical ),
+						   zones      => {},
+						   origin     => shortlineinfo( '' ),
+						   wildcard   => $wildcard,
+					         };
+
+    $interfaces{$physical} = $interfaceref if $physical ne $interface;
 
     if ( $zone ) {
 	fatal_error "Unmanaged interfaces may not be associated with a zone" if $options{unmanaged};
@@ -1570,20 +1582,23 @@ sub known_interface($)
 
 		my $physical = map_physical( $interface, $interfaceref );
 
-		return $interfaces{$interface} = { options  => $interfaceref->{options} ,
-						   bridge   => $interfaceref->{bridge} ,
-						   name     => $i ,
-						   number   => $interfaceref->{number} ,
-						   physical => $physical ,
-						   base     => var_base( $physical ) ,
-						   wildcard => $interfaceref->{wildcard} ,
-						   zones    => $interfaceref->{zones} ,
-						 };
+		$interfaceref =
+		    $interfaces{$interface} =
+		    $interfaces{$physical} = { options  => $interfaceref->{options} ,
+					       bridge   => $interfaceref->{bridge} ,
+					       name     => $i ,
+					       number   => $interfaceref->{number} ,
+					       physical => $physical ,
+					       base     => $interfaceref->{base} ,
+					       wildcard => $interfaceref->{wildcard} ,
+					       zones    => $interfaceref->{zones} ,
+		                              };
+		return $interfaceref;
 	    }
 	}
     }
 
-    $physical{$interface} || 0;
+    0;
 }
 
 # 
@@ -1655,12 +1670,19 @@ sub find_interface( $ ) {
 }
 
 #
-# Returns the physical interface associated with the passed logical name
+# Returns the physical interface associated with the passed interface name
 #
 sub get_physical( $ ) {
     $interfaces{ $_[0] }->{physical};
 }
 
+#
+# Returns the logical interface associated with the passed interface name
+#
+sub get_logical( $ ) {
+    $interfaces{ $_[0] }->{name};
+}
+
 #
 # This one doesn't insist that the passed name be the name of a configured interface
 #
@@ -1896,7 +1918,7 @@ sub verify_required_interfaces( $ ) {
 
     my $returnvalue = 0;
 
-    my $interfaces = find_interfaces_by_option 'wait';
+    my $interfaces = find_interfaces_by_option( 'wait');
 
     if ( @$interfaces ) {
 	my $first = 1;
@@ -1962,7 +1984,7 @@ sub verify_required_interfaces( $ ) {
 
     }
 
-    $interfaces = find_interfaces_by_option 'required';
+    $interfaces = find_interfaces_by_option( 'required' );
 
     if ( @$interfaces ) {
 
@@ -2040,6 +2062,7 @@ sub process_host( ) {
 	    $interface = $1;
 	    $hosts = $2;
 	    fatal_error "Unknown interface ($interface)" unless ($interfaceref = $interfaces{$interface}) && $interfaceref->{root};
+	    $interface = $interfaceref->{name};
 	} else {
 	    fatal_error "Invalid HOST(S) column contents: $hosts";
 	}
@@ -2053,7 +2076,7 @@ sub process_host( ) {
 
 	fatal_error "Unknown interface ($interface)" unless ($interfaceref = $interfaces{$interface}) && $interfaceref->{root};
 	fatal_error "Unmanaged interfaces may not be associated with a zone" if $interfaceref->{unmanaged};
-
+	$interface = $interfaceref->{name};
 	if ( $interfaceref->{physical} eq $loopback_interface ) {
 	    fatal_error "Only a loopback zone may be associated with the loopback interface ($loopback_interface)" if $type != LOOPBACK;
 	} else {
@@ -2141,7 +2164,7 @@ sub process_host( ) {
 
 	$hosts = "+$set";
 	$optionsref->{dynamic} = 1;
-	$ipsets{$set} = 1;
+	add_ipset($set);
     }
 
     #
@@ -2149,7 +2172,7 @@ sub process_host( ) {
     #
     $interface = '%vserver%' if $type & VSERVER;
 
-    add_group_to_zone( $zone, $type , $interface, [ split_list( $hosts, 'host' ) ] , $optionsref, 1 );
+    add_group_to_zone( $zone, $type , $interface, [ split_list( $hosts, 'host' ) ] , $optionsref, 0 );
 
     progress_message "   Host \"$currentline\" validated";
 
@@ -2261,8 +2284,4 @@ sub find_zones_by_option( $$ ) {
     \@zns;
 }
 
-sub all_ipsets() {
-    sort keys %ipsets;
-}
-
 1;

Shorewall/Perl/compiler.pl

@@ -41,10 +41,7 @@
 #         --shorewallrc1=<path>       # Path to export shorewallrc file.
 #         --config_path=<path-list>   # Search path for config files
 #         --inline                    # Update alternative column specifications
-#         --update                    # Update configuration to this release
-#         --tcrules                   # Create mangle from tcrules
-#         --routestopped              # Create stoppedrules from routestopped
-#         --notrack                   # Create conntrack from notrack
+#         --update                    # Update configuration to current release
 #
 use strict;
 use FindBin;

Shorewall/Perl/lib.runtime

@@ -1,4 +1,4 @@
-#   (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#   (c) 1999-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #	This program is part of Shorewall.
 #
@@ -49,7 +49,7 @@
 #					generated this program
 #
 ################################################################################
-# Functions imported from /usr/share/shorewall/lib.core
+# Functions imported from /usr/share/shorewall/lib.runtime
 ################################################################################
 #		      Address family-neutral Functions
 ################################################################################
@@ -599,7 +599,15 @@ debug_restore_input() {
 }
 
 interface_enabled() {
-    return $(cat ${VARDIR}/$1.status)
+    status=0
+
+    if [ -f ${VARDIR}/${1}_disabled ]; then
+	status=1
+    elif [ -f ${VARDIR}/${1}.status ]; then
+	status=$(cat ${VARDIR}/${1}.status)
+    fi
+
+    return $status
 }
 
 distribute_load() {
@@ -678,8 +686,10 @@ interface_is_usable() # $1 = interface
 
     if ! loopback_interface $1; then
 	if interface_is_up $1 && [ "$(find_first_interface_address_if_any $1)" != 0.0.0.0 ]; then
-	    [ "$COMMAND" = enable ] || run_isusable_exit $1
-	    status=$?
+	    if [ "$COMMAND" != enable ]; then
+		[ ! -f ${VARDIR}/${1}_disabled ] && run_isusable_exit $1
+		status=$?
+	    fi
 	else
 	    status=1
 	fi
@@ -996,9 +1006,16 @@ delete_gateway() # $! = Description of the Gateway $2 = table number $3 = device
 
     if [ -n "$route" ]; then
 	if echo $route | grep -qF ' nexthop '; then
-	    gateway="nexthop $gateway"
-	    eval route=\`echo $route \| sed \'s/$gateway/ /\'\`
-	    run_ip route replace table $2 $route
+	    if interface_is_up $3; then
+		gateway="nexthop $gateway"
+	    else
+		gateway="nexthop $gateway dead"
+	    fi
+
+	    if eval echo $route \| fgrep -q \'$gateway\'; then
+		eval route=\`echo $route \| sed \'s/$gateway/ /\'\`
+		run_ip route replace table $2 $route
+	    fi
 	else
 	    dev=$(find_device $route)
 	    [ "$dev" = "$3" ] && run_ip route delete default table $2
@@ -1095,8 +1112,10 @@ interface_is_usable() # $1 = interface
 
     if [ "$1" != lo ]; then
 	if interface_is_up $1 && [ "$(find_first_interface_address_if_any $1)" != :: ]; then
-	    [ "$COMMAND" = enable ] || run_isusable_exit $1
-	    status=$?
+	    if [ "$COMMAND" != enable ]; then
+		[ ! -f ${VARDIR}/${1}_disabled ] && run_isusable_exit $1
+		status=$?
+	    fi
 	else
 	    status=1
 	fi
@@ -1110,7 +1129,7 @@ interface_is_usable() # $1 = interface
 #
 find_interface_addresses() # $1 = interface
 {
-    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 2' | sed 's/\s*inet6 //;s/\/.*//;s/ peer.*//'
+    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 2' | sed 's/\s*inet6 //;s/\/.*//;s/ peer [0-9a-f:]*//'
 }
 
 #
@@ -1119,7 +1138,7 @@ find_interface_addresses() # $1 = interface
 
 find_interface_full_addresses() # $1 = interface
 {
-    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 ' | sed 's/\s*inet6 //;s/ scope.*//;s/ peer.*//'
+    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 ' | sed 's/\s*inet6 //;s/ scope.*//;s/ peer [0-9a-f:]*//'
 }
 
 #

Shorewall/Perl/prog.footer

@@ -25,6 +25,7 @@ usage() {
     echo "   savesets <file>"
     echo "   call <function> [ <parameter> ... ]"
     echo "   version"
+    echo "   info"
     echo
     echo "Options are:"
     echo
@@ -125,6 +126,8 @@ g_sha1sum2=
 g_counters=
 g_compiled=
 g_file=
+g_docker=
+g_dockernetwork=
 
 initialize
 
@@ -467,6 +470,10 @@ case "$COMMAND" in
 	echo $SHOREWALL_VERSION
 	status=0
 	;;
+    info)
+	[ $# -ne 1 ] && usage 2
+	info_command
+	;;
     help)
 	[ $# -ne 1 ] && usage 2
 	usage 0

Shorewall/README.txt

@@ -1 +0,0 @@
-This is the Shorewall 4.4 stable branch of Git.

Shorewall/Samples/Universal/shorewall.conf

@@ -17,6 +17,18 @@ STARTUP_ENABLED=Yes
 
 VERBOSITY=1
 
+###############################################################################
+#			        P A G E R
+###############################################################################
+
+PAGER=
+
+###############################################################################
+#			     F I R E W A L L
+###############################################################################
+
+FIREWALL=
+
 ###############################################################################
 #		                L O G G I N G
 ###############################################################################
@@ -122,15 +134,13 @@ ADD_SNAT_ALIASES=No
 
 ADMINISABSENTMINDED=Yes
 
-BASIC_FILTERS=No
-
-IGNOREUNKNOWNVARIABLES=No
-
 AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
+
+BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -146,6 +156,8 @@ DEFER_DNS_RESOLUTION=Yes
 
 DISABLE_IPV6=No
 
+DOCKER=No
+
 DELETE_THEN_ADD=Yes
 
 DETECT_DNAT_IPADDRS=No
@@ -164,6 +176,8 @@ FORWARD_CLEAR_MARK=
 
 HELPERS=
 
+IGNOREUNKNOWNVARIABLES=No
+
 IMPLICIT_CONTINUE=No
 
 INLINE_MATCHES=Yes
@@ -184,6 +198,8 @@ MANGLE_ENABLED=Yes
 
 MAPOLDACTIONS=No
 
+MINIUPNPD=No
+
 MARK_IN_FORWARD_CHAIN=No
 
 MODULE_SUFFIX="ko ko.xz"
@@ -232,10 +248,14 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No
 
+ZERO_MARKS=No
+
 ZONE2ZONE=-
 
 ###############################################################################

Shorewall/Samples/one-interface/shorewall.conf

@@ -28,6 +28,18 @@ STARTUP_ENABLED=No
 
 VERBOSITY=1
 
+###############################################################################
+#			        P A G E R
+###############################################################################
+
+PAGER=
+
+###############################################################################
+#			     F I R E W A L L
+###############################################################################
+
+FIREWALL=
+
 ###############################################################################
 #		                L O G G I N G
 ###############################################################################
@@ -133,15 +145,13 @@ ADD_SNAT_ALIASES=No
 
 ADMINISABSENTMINDED=Yes
 
-BASIC_FILTERS=No
-
-IGNOREUNKNOWNVARIABLES=No
-
 AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
+
+BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -157,6 +167,8 @@ DEFER_DNS_RESOLUTION=Yes
 
 DISABLE_IPV6=No
 
+DOCKER=No
+
 DELETE_THEN_ADD=Yes
 
 DETECT_DNAT_IPADDRS=No
@@ -175,6 +187,8 @@ FORWARD_CLEAR_MARK=
 
 HELPERS=
 
+IGNOREUNKNOWNVARIABLES=No
+
 IMPLICIT_CONTINUE=No
 
 INLINE_MATCHES=Yes
@@ -195,6 +209,8 @@ MANGLE_ENABLED=Yes
 
 MAPOLDACTIONS=No
 
+MINIUPNPD=No
+
 MARK_IN_FORWARD_CHAIN=No
 
 MODULE_SUFFIX="ko ko.xz"
@@ -243,10 +259,14 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No
 
+ZERO_MARKS=No
+
 ZONE2ZONE=-
 
 ###############################################################################

Shorewall/Samples/three-interfaces/shorewall.conf

@@ -25,6 +25,18 @@ STARTUP_ENABLED=No
 
 VERBOSITY=1
 
+###############################################################################
+#			        P A G E R
+###############################################################################
+
+PAGER=
+
+###############################################################################
+#			     F I R E W A L L
+###############################################################################
+
+FIREWALL=
+
 ###############################################################################
 #		                L O G G I N G
 ###############################################################################
@@ -130,15 +142,13 @@ ADD_SNAT_ALIASES=No
 
 ADMINISABSENTMINDED=Yes
 
-BASIC_FILTERS=No
-
-IGNOREUNKNOWNVARIABLES=No
-
 AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
+
+BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -154,6 +164,8 @@ DEFER_DNS_RESOLUTION=Yes
 
 DISABLE_IPV6=No
 
+DOCKER=No
+
 DELETE_THEN_ADD=Yes
 
 DETECT_DNAT_IPADDRS=No
@@ -172,6 +184,8 @@ FORWARD_CLEAR_MARK=
 
 HELPERS=
 
+IGNOREUNKNOWNVARIABLES=No
+
 IMPLICIT_CONTINUE=No
 
 INLINE_MATCHES=Yes
@@ -192,6 +206,8 @@ MANGLE_ENABLED=Yes
 
 MAPOLDACTIONS=No
 
+MINIUPNPD=No
+
 MARK_IN_FORWARD_CHAIN=No
 
 MODULE_SUFFIX="ko ko.xz"
@@ -240,10 +256,14 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No
 
+ZERO_MARKS=No
+
 ZONE2ZONE=-
 
 ###############################################################################

Shorewall/Samples/two-interfaces/shorewall.conf

@@ -28,6 +28,18 @@ STARTUP_ENABLED=No
 
 VERBOSITY=1
 
+###############################################################################
+#			        P A G E R
+###############################################################################
+
+PAGER=
+
+###############################################################################
+#			     F I R E W A L L
+###############################################################################
+
+FIREWALL=
+
 ###############################################################################
 #		                L O G G I N G
 ###############################################################################
@@ -133,15 +145,13 @@ ADD_SNAT_ALIASES=No
 
 ADMINISABSENTMINDED=Yes
 
-BASIC_FILTERS=No
-
-IGNOREUNKNOWNVARIABLES=No
-
 AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
+
+BASIC_FILTERS=No
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -157,6 +167,8 @@ DEFER_DNS_RESOLUTION=Yes
 
 DISABLE_IPV6=No
 
+DOCKER=No
+
 DELETE_THEN_ADD=Yes
 
 DETECT_DNAT_IPADDRS=No
@@ -175,6 +187,8 @@ FORWARD_CLEAR_MARK=
 
 HELPERS=
 
+IGNOREUNKNOWNVARIABLES=No
+
 IMPLICIT_CONTINUE=No
 
 INLINE_MATCHES=Yes
@@ -195,6 +209,8 @@ MANGLE_ENABLED=Yes
 
 MAPOLDACTIONS=No
 
+MINIUPNPD=No
+
 MARK_IN_FORWARD_CHAIN=No
 
 MODULE_SUFFIX="ko ko.xz"
@@ -243,10 +259,14 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No
 
+ZERO_MARKS=No
+
 ZONE2ZONE=-
 
 ###############################################################################

Shorewall/action.A_Drop

@@ -1,41 +1,39 @@
 #
-# Shorewall version 5 - Drop Action
+# Shorewall -- /usr/share/shorewall/action.A_Drop
 #
-# /usr/share/shorewall/action.A_Drop
+# The audited default DROP common rules
 #
-#	The audited default DROP common rules
+# This action is invoked before a DROP policy is enforced. The purpose
+# of the action is:
 #
-#	This action is invoked before a DROP policy is enforced. The purpose
-#	of the action is:
-#
-#	a) Avoid logging lots of useless cruft.
-#	b) Ensure that 'auth' requests are rejected, even if the policy is
-#	   DROP. Otherwise, you may experience problems establishing
-#	   connections with servers that use auth.
-#	c) Ensure that certain ICMP packets that are necessary for successful
-#	   internet operation are always ACCEPTed.
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 #
 ###############################################################################
-#TARGET		SOURCE	DEST	PROTO	DPORT	SPORT
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
 #
 # Count packets that come through here
 #
 COUNT
 #
-# Silently DROP 'auth'
+# Special Handling for Auth
 #
 Auth(A_DROP)
 #
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before broadcast Drop.
+#
+A_AllowICMPs	-	-	icmp
+#
 # Don't log broadcasts
 #
 dropBcast(audit)
 #
-# ACCEPT critical ICMP types
-#
-A_AllowICMPs	-	-	icmp
-#
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log.
 #

Shorewall/action.A_REJECT

@@ -0,0 +1,41 @@
+#
+# Shorewall -- /usr/share/shorewall/action.A_REJECTWITH
+#
+# A_REJECT Action.
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# A_REJECTWITH[([<option>])] where <option> is a valid REJECT option.#
+###############################################################################
+
+DEFAULTS -
+
+AUDIT(reject)
+
+?if passed @1
+    ?if @1 =~ /tcp-reset$/
+        ?set reject_proto 6
+    ?else
+        ?set reject_proto ''
+    ?endif
+REJECT(@1)	-	-	$reject_proto
+?else
+REJECT
+?endif

Shorewall/action.A_REJECT!

@@ -0,0 +1,30 @@
+#
+# Shorewall -- /usr/share/shorewall/action.A_REJECT!
+#
+# A_REJECT! Action.
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# A_REJECTWITH[([<option>])] where <option> is a valid REJECT option.#
+###############################################################################
+
+DEFAULTS -
+
+A_REJECT(@1)

Shorewall/action.A_Reject.deprecated

@@ -1,34 +1,35 @@
 #
-# Shorewall version 5 - Reject Action
+# Shorewall -- /usr/share/shorewall/action.A_Reject
 #
-# /usr/share/shorewall/action.A_Reject
+# The audited default REJECT action common rules
 #
-#	The audited default REJECT action common rules
+# This action is invoked before a REJECT policy is enforced. The purpose
+# of the action is:
 #
-#	This action is invoked before a REJECT policy is enforced. The purpose
-#	of the action is:
-#
-#	a) Avoid logging lots of useless cruft.
-#	b) Ensure that certain ICMP packets that are necessary for successful
-#	   internet operation are always ACCEPTed.
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 ###############################################################################
-#TARGET		SOURCE	DEST	PROTO
+#ACTION		SOURCE	DEST	PROTO
 #
 # Count packets that come through here
 #
 COUNT
 #
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before broadcast Drop.
+#
+A_AllowICMPs	-	-	icmp
+#
 # Drop Broadcasts so they don't clutter up the log
 # (broadcasts must *not* be rejected).
 #
 dropBcast(audit)
 #
-# ACCEPT critical ICMP types
-#
-A_AllowICMPs	-	-	icmp
-#
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log (these ICMPs cannot be
 # rejected).

Shorewall/action.AutoBL

@@ -1,22 +1,24 @@
 #
-# Shorewall version 5 - Auto Blacklist Action
+# Shorewall -- /usr/share/shorewall/action.AutoBL
+#
+# Auto Blacklist Action
 #
 # Parameters are:
 #
-#    Event          - Name of the event to associate with this blacklist
-#    Interval
-#    Count          - Interval and number of Packets to trigger blacklisting
-#                     Default is 60 seconds and 5 packets.
-#    Successive     - If a matching packet arrives within this many
-#                     seconds of the preceding one, it should be logged
-#                     and dealt with according to the Disposition and
-#                     Log Level parameters below. Default is 2 seconds.
-#    Blacklist time - Number of seconds to blacklist
-#                     Default is 300 (5 minutes)
-#    Disposition    - Disposition of blacklisted packets
-#                     Default is DROP
-#    Log Level      - Level to Log Rejects
-#                     Default is info (6)
+# Event          - Name of the event to associate with this blacklist
+#                  Interval
+# Count          - Interval and number of Packets to trigger blacklisting
+#                  Default is 60 seconds and 5 packets.
+# Successive     - If a matching packet arrives within this many
+#                  seconds of the preceding one, it should be logged
+#                  and dealt with according to the Disposition and
+#                  Log Level parameters below. Default is 2 seconds.
+# Blacklist time - Number of seconds to blacklist
+#                  Default is 300 (5 minutes)
+# Disposition    - Disposition of blacklisted packets
+#                  Default is DROP
+# Log Level      - Level to Log Rejects
+#                  Default is info (6)
 #
 ###############################################################################
 
@@ -37,7 +39,7 @@ validate_level( $level );
 1;
 ?end perl
 ###############################################################################
-#TARGET		SOURCE	DEST	PROTO	DPORT	SPORT
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
 #
 # Silently reject the client if blacklisted
 #

Shorewall/action.AutoBLL

@@ -1,13 +1,16 @@
 #
-# Shorewall version 5 - Auto Blacklisting Logger Action
+# Shorewall -- /usr/share/shorewall/action.AutoBLL
+#
+# Auto Blacklisting Logger Action
 #
 # Arguments are
 #
-#    Event:       Name of the blacklisted event
-#    Disposition: What to do with packets
-#    Level:       Log level and optional tag for logging.
+# Event       - Name of the blacklisted event
+# Disposition - What to do with packets
+# Level       - Log level and optional tag for logging
+#
 ###############################################################################
-#TARGET		SOURCE	DEST	PROTO	DPORT	SPORT
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
 #
 # Log the Reject
 #

Shorewall/action.Broadcast

@@ -1,73 +1,59 @@
 #
-# Shorewall 4 - Broadcast Action
+# Shorewall -- /usr/share/shorewall/action.Broadcast
 #
-#    /usr/share/shorewall/action.Broadcast
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#     (c) 2011 - Tom Eastep (teastep@shorewall.net)
+# Complete documentation is available at http://shorewall.net
 #
-#       Complete documentation is available at http://shorewall.net
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# Broadcast[([<action>|-[,{audit|-}])]
 #
-#   Broadcast[([<action>|-[,{audit|-}])]
+# Default action is DROP
 #
-#       Default action is DROP
-#
-##########################################################################################
+###############################################################################
 
 DEFAULTS DROP,-
 
+?if __ADDRTYPE
+@1	-	-	-	;; -m addrtype --dst-type BROADCAST
+@1	-	-	-	;; -m addrtype --dst-type MULTICAST
+@1	-	-	-	;; -m addrtype --dst-type ANYCAST
+?else
 ?begin perl;
 
 use Shorewall::IPAddrs;
 use Shorewall::Config;
 use Shorewall::Chains;
 
-my ( $action, $audit ) = get_action_params( 2 );
-
-fatal_error "Invalid parameter ($audit) to action Broadcast"   if supplied $audit && $audit ne 'audit';
-fatal_error "Invalid parameter ($action) to action Broadcast"  unless $action =~ /^(?:ACCEPT|DROP|REJECT)$/;
-
+my ( $action )         = get_action_params( 1 );
 my $chainref           = get_action_chain;
-
 my ( $level, $tag )    = get_action_logging;
-my $target             = require_audit ( $action , $audit );
 
-if ( have_capability( 'ADDRTYPE' ) ) {
-    if ( $level ne '' ) {
-	log_rule_limit $level, $chainref, 'dropBcast' , $action, '', $tag, 'add', ' -m addrtype --dst-type BROADCAST ';
-	log_rule_limit $level, $chainref, 'dropBcast' , $action, '', $tag, 'add', ' -m addrtype --dst-type MULTICAST ';
-	log_rule_limit $level, $chainref, 'dropBcast' , $action, '', $tag, 'add', ' -m addrtype --dst-type ANYCAST ';
-    }
+add_commands $chainref, 'for address in $ALL_BCASTS; do';
+incr_cmd_level $chainref;
+log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
+add_jump $chainref, $action, 0, "-d \$address ";
+decr_cmd_level $chainref;
+add_commands $chainref, 'done';
 
-    add_jump $chainref, $target, 0, '-m addrtype --dst-type BROADCAST ';
-    add_jump $chainref, $target, 0, '-m addrtype --dst-type MULTICAST ';
-    add_jump $chainref, $target, 0, '-m addrtype --dst-type ANYCAST ';
-} else {
-    add_commands $chainref, 'for address in $ALL_BCASTS; do';
-    incr_cmd_level $chainref;
-    log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
-    add_jump $chainref, $target, 0, "-d \$address ";
-    decr_cmd_level $chainref;
-    add_commands $chainref, 'done';
-
-    log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d 224.0.0.0/4 ' if $level ne '';
-    add_jump $chainref, $target, 0, '-d 224.0.0.0/4 ';
-}
+log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d 224.0.0.0/4 ' if $level ne '';
+add_jump $chainref, $action, 0, '-d 224.0.0.0/4 ';
 
 1;
 
 ?end perl;
+?endif

Shorewall/action.DNSAmp

@@ -1,33 +1,34 @@
 #
-# Shorewall 5 - DNS Amplification Action
+# Shorewall -- /usr/share/shorewall/action.DNSAmp
 #
-#    /usr/share/shorewall/action.DNSAmp
+#  DNS Amplification Action
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2011,2012 - Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#       Complete documentation is available at http://shorewall.net
+# Complete documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#   DNSAmp[([<action>])]
+# DNSAmp[([<action>])]
 #
-#       Default action is DROP
+# Default action is DROP
 #
-##########################################################################################
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT
 
 DEFAULTS DROP
 
-IPTABLES(@1)	-	-	udp	53	; -m u32 --u32 "0>>22&0x3C\@8&0xffff=0x0100 && 0>>22&0x3C\@12&0xffff0000=0x00010000"
+@1	-	-	udp	53	;; -m u32 --u32 "0>>22&0x3C\@8&0xffff=0x0100 && 0>>22&0x3C\@12&0xffff0000=0x00010000"

Shorewall/action.Drop

@@ -1,59 +1,45 @@
 #
-# Shorewall version 5 - Drop Action
+# Shorewall -- /usr/share/shorewall/action.Drop
 #
-# /usr/share/shorewall/action.Drop
+# The default DROP common rules
 #
-#	The default DROP common rules
+# This action is invoked before a DROP policy is enforced. The purpose
+# of the action is:
 #
-#	This action is invoked before a DROP policy is enforced. The purpose
-#	of the action is:
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
 #
-#	a) Avoid logging lots of useless cruft.
-#	b) Ensure that certain ICMP packets that are necessary for successful
-#	   internet operation are always ACCEPTed.
+# The action accepts six optional parameters:
 #
-#  The action accepts five optional parameters:
-#
-#	1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
-#           actions.
-#       2 - Action to take with Auth requests. Default is to do nothing special
-#	    with them.
-#	3 - Action to take with SMB requests. Default is DROP or A_DROP,
-#           depending on the setting of the first parameter.
-#       4 - Action to take with required ICMP packets. Default is ACCEPT or
-#           A_ACCEPT depending on the first parameter.
-#       5 - Action to take with late UDP replies (UDP source port 53). Default
-#           is DROP or A_DROP depending on the first parameter.
+# 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
+#     actions.
+# 2 - Action to take with Auth requests. Default is to do nothing special
+#     with them.
+# 3 - Action to take with SMB requests. Default is DROP or A_DROP,
+#     depending on the setting of the first parameter.
+# 4 - Action to take with required ICMP packets. Default is ACCEPT or
+#     A_ACCEPT depending on the first parameter.
+# 5 - Action to take with late UDP replies (UDP source port 53). Default
+#     is DROP or A_DROP depending on the first parameter.
+# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
+#     depending on the first parameter.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 #
 ###############################################################################
-#
-# The following magic provides different defaults for @2 thru @5, when @1 is
-# 'audit'.
-#
-?begin perl;
-use Shorewall::Config;
 
-my ( $p1, $p2, $p3 , $p4, $p5 ) = get_action_params( 5 );
+?if passed(@1)
+    ?if @1 eq 'audit'
+DEFAULTS -,-,A_DROP,A_ACCEPT,A_DROP,A_DROP
+    ?else
+        ?error The first parameter to Drop must be 'audit' or '-'
+    ?endif
+?else
+DEFAULTS -,-,DROP,ACCEPT,DROP,DROP
+?endif
 
-if ( defined $p1 ) {
-    if ( $p1 eq 'audit' ) {
-	set_action_param( 3, 'A_DROP')     unless supplied $p3;
-	set_action_param( 4, 'A_ACCEPT' )  unless supplied $p4;
-	set_action_param( 5, 'A_DROP' )    unless supplied $p5;
-    } else {
-	fatal_error "Invalid value ($p1) for first Drop parameter" if supplied $p1;
-    }
-}
-
-1;
-
-?end perl;
-
-DEFAULTS -,-,DROP,ACCEPT,DROP
-
-#TARGET		SOURCE	DEST	PROTO	DPORT	SPORT
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
 #
 # Count packets that come through here
 #
@@ -61,18 +47,21 @@ COUNT
 #
 # Special Handling for Auth
 #
-?if @2 ne '-'
+?if passed(@2)
 Auth(@2)
 ?endif
 #
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before silent broadcast Drop.
+#
+AllowICMPs(@4)	-	-	icmp
+#
 # Don't log broadcasts
 #
 Broadcast(DROP,@1)
 #
-# ACCEPT critical ICMP types
-#
-AllowICMPs(@4)	-	-	icmp
-#
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log.
 #
@@ -81,7 +70,7 @@ Invalid(DROP,@1)
 # Drop Microsoft noise so that it doesn't clutter up the log.
 #
 SMB(@3)
-DropUPnP(@5)
+DropUPnP(@6)
 #
 # Drop 'newnotsyn' traffic so that it doesn't get logged.
 #

Shorewall/action.DropSmurfs

@@ -1,14 +1,14 @@
 #
-# Shorewall version 5 - Drop Smurfs Action
+# Shorewall -- /usr/share/shorewall/action.DropSmurfs
 #
-# /usr/share/shorewall/action.DropSmurfs
+# Drop Smurfs Action
 #
-#   Accepts a single optional parameter:
+# Accepts a single optional parameter:
 #
-#          -     = Do not Audit
-#          audit = Audit dropped packets.
+# -     = Do not Audit
+# audit = Audit dropped packets.
 #
-#################################################################################
+###############################################################################
 
 DEFAULTS -
 
@@ -79,8 +79,3 @@ if ( $family == F_IPV4 ) {
 }
 
 ?end perl;
-
-
-
-
-

Shorewall/action.Established

@@ -1,48 +1,35 @@
 #
-# Shorewall 5 - Established Action
+# Shorewall -- /usr/share/shorewall/action.Established
 #
-#    /usr/share/shorewall/action.Established
+# Established Action
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2011,2012 - Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#       Complete documentation is available at http://shorewall.net
+# Complete documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#   Established[([<action>])]
+# Established[([<action>])]
 #
-#       Default action is ACCEPT
+# Default action is ACCEPT
 #
-##########################################################################################
+###############################################################################
 
 DEFAULTS ACCEPT
 
-?begin perl;
-
-use Shorewall::IPAddrs;
-use Shorewall::Config;
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my ( $action ) = get_action_params( 1 );
-
-if ( my $check = check_state( 'ESTABLISHED' ) ) {
-    perl_action_helper( $action, $check == 1 ? state_match('ESTABLISHED') : '', 'ESTABLISHED' );
-}
-
-1;
-
-?end perl;
+#
+# All logic for this action is supplied by the 'state' option in actions.std
+#

Shorewall/action.GlusterFS

@@ -1,33 +1,25 @@
 #
-# Shorewall version 5 - GlusterFS Handler for GlusterFS 3.4 and Later
+# Shorewall -- /usr/share/shorewall/action.GlusterFS
 #
-# /etc/shorewall/action.GlusterFS
+# GlusterFS Handler for GlusterFS 3.4 and Later
 #
 # Parameters:
-#	Bricks:		Number of bricks
-#	IB:		0 or 1, indicating whether Infiniband is used or not
 #
-#########################################################################################
+# Bricks - Number of bricks
+# IB     - 0 or 1, indicating whether Infiniband is used or not
+#
+###############################################################################
 
 DEFAULTS 2,0
 
-?begin perl
+?if @1 !~ /^\d+/ || ! @1 || @1 > 1024
+    ?error Invalid value for Bricks (@1)
+?elsif @2 !~ /^[01]$/
+    ?error Invalid value for IB (@2)
+?endif
 
-use Shorewall::Config qw(:DEFAULT :internal);
-use Shorewall::Chains;
-use Shorewall::Rules;
-use strict;
+#ACTION		SOURCE		DEST		PROTO	DPORT
 
-my ( $bricks, $ib ) = get_action_params( 2 );
-
-fatal_error "Invalid value for Bricks ( $bricks )" unless $bricks =~ /^\d+$/ && $bricks > 1 && $bricks < 1024;
-fatal_error "Invalid value for IB ( $ib )" unless $ib =~ /^[01]$/;
-
-?end perl
-
-
-#ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK	CONNLIMIT	TIME         HEADERS         SWITCH        HELPER
-#							PORT	PORT(S)		DEST		LIMIT		GROUP
 ACCEPT		-		-		udp	111,2049
 ACCEPT		-		-		tcp	38465:38467
 
@@ -40,4 +32,3 @@ ACCEPT		-		-		tcp	24007
 ?set last_port 49150 + @{1}
 
 ACCEPT		-		-		tcp	49151:$last_port
-

Shorewall/action.IfEvent

@@ -1,34 +1,38 @@
 #
-# Shorewall version 5 - Perform an Action based on a Event
+# Shorewall -- /usr/share/shorewall/action.IfEvent
 #
-# /etc/shorewall/action.IfEvent
+# Perform an Action based on a Event
 #
 # Parameters:
-#    Event:        Must start with a letter and be composed of letters, digits, '-', and '_'.
-#    Action:       Anything that can appear in the ACTION column of a rule.
-#    Duration:     Duration in seconds over which the event is to be tested.
-#    Hit Count:    Number of packets seen within the duration -- default is 1
-#    Src or Dest:  'src' (default) or 'dst'. Determines if the event is associated with the source
-#                  address (src) or destination address (dst)
-#    Command:      'check' (default) 'reset', or 'update'. If 'reset', the event will be reset before
-#                  the Action is taken. If 'update', the timestamp associated with the event will
-#                  be updated and the action taken if the time limit/hitcount are matched.
-#                  If '-', the action will be taken if the limit/hitcount are matched but the
-#                  event's timestamp will not be updated.
 #
-#                  If a duration is specified, then 'checkreap' and 'updatereap' may also
-#                  be used. These are like 'check' and 'update' respectively, but they also
-#                  remove any event entries for the IP address that are older than <duration>
-#                  seconds.
-#    Disposition:  Disposition for any event generated.
+# Event        - Must start with a letter and be composed of letters, digits,
+#                '-', and '_'.
+# Action       - Anything that can appear in the ACTION column of a rule.
+# Duration     - Duration in seconds over which the event is to be tested.
+# Hit Count    - Number of packets seen within the duration -- default is 1
+# Src or Dest  - 'src' (default) or 'dst'. Determines if the event is
+#                associated with the source address (src) or destination
+#                address (dst)
+# Command      - 'check' (default) 'reset', or 'update'. If 'reset',
+#                the event will be reset before the Action is taken.
+#                If 'update', the timestamp associated with the event will
+#                be updated and the action taken if the time limit/hitcount
+#                are matched.
+#                If '-', the action will be taken if the limit/hitcount are
+#                matched but the event's timestamp will not be updated.
+#
+#                If a duration is specified, then 'checkreap' and 'updatereap'
+#                may also be used. These are like 'check' and 'update'
+#                respectively, but they also remove any event entries for
+#                the IP address that are older than <duration> seconds.
+# Disposition  - Disposition for any event generated.
 #
 # For additional information, see http://www.shorewall.net/Events.html
 #
-#######################################################################################################
+###############################################################################
 #                                         DO NOT REMOVE THE FOLLOWING LINE
-#################################################################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK	CONNLIMIT	TIME         HEADERS         SWITCH        HELPER
-#							PORT	PORT(S)		DEST		LIMIT		GROUP
+###############################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT
 
 DEFAULTS -,ACCEPT,-,1,src,check,-
 

Shorewall/action.Invalid

@@ -1,53 +1,35 @@
 #
-# Shorewall 4 - Invalid Action
+# Shorewall -- /usr/share/shorewall/action.Invalid
 #
-#    /usr/share/shorewall/action.Invalid
+# Invalid Action
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#     (c) 2011,2012 - Tom Eastep (teastep@shorewall.net)
+# Complete documentation is available at http://shorewall.net
 #
-#       Complete documentation is available at http://shorewall.net
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# Invalid[([<action>])]
 #
-#   Invalid[([<action>])]
+# Default action is DROP
 #
-#       Default action is DROP
-#
-##########################################################################################
+###############################################################################
 
 DEFAULTS DROP,-
 
-?begin perl;
-
-use Shorewall::IPAddrs;
-use Shorewall::Config;
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my ( $action, $audit ) = get_action_params( 2 );
-
-if ( supplied $audit ) {
-     fatal_error "Invalid parameter ($audit) to action Invalid" if $audit ne 'audit';
-     $action = "A_$action";
-}
-
-if ( my $check = check_state( 'INVALID' ) ) {
-    perl_action_helper( $action, $check == 1 ? state_match( 'INVALID' ) : '' , 'INVALID' );
-}
-
-1;
-
-?end perl;
+#
+# All logic for this action is triggered by the 'audit' and 'state' options
+# in actions.std
+#

Shorewall/action.New

@@ -1,48 +1,35 @@
 #
-# Shorewall 4 - New Action
+# Shorewall -- /usr/share/shorewall/action.New
 #
-#    /usr/share/shorewall/action.New
+# New Action
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2011,2012 - Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#       Complete documentation is available at http://shorewall.net
+# Complete documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#   Untracked[([<action>])]
+# New[([<action>])]
 #
-#       Default action is ACCEPT
+# Default action is ACCEPT
 #
-##########################################################################################
+###############################################################################
 
 DEFAULTS ACCEPT
 
-?begin perl;
-
-use Shorewall::IPAddrs;
-use Shorewall::Config;
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my ( $action ) = get_action_params( 1 );
-
-if ( my $check = check_state( 'NEW' ) ) {
-    perl_action_helper( $action, $check == 1 ? state_match( 'NEW' ) : '' , 'NEW' );
-}
-
-1;
-
-?end perl;
+#
+# All logic for this action is supplied by the 'state' option in actions.std
+#

Shorewall/action.NotSyn

@@ -1,52 +1,33 @@
 #
-# Shorewall 4 - NotSyn Action
+# Shorewall -- /usr/share/shorewall/action.NotSyn
 #
-#    /usr/share/shorewall/action.NotSyn
+# NotSyn Action
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2011 - Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#       Complete documentation is available at http://shorewall.net
+# Complete documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#   NotSyn[([<action>])]
+# NotSyn[([<action>])]
 #
-#       Default action is DROP
+# Default action is DROP
 #
-##########################################################################################
+###############################################################################
 
 DEFAULTS DROP,-
 
-?begin perl;
-
-use strict;
-use Shorewall::IPAddrs;
-use Shorewall::Config;
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my ( $action, $audit ) = get_action_params( 2 );
-
-if ( supplied $audit ) {
-     fatal_error "Invalid parameter ($audit) to action NotSyn" if $audit ne 'audit';
-     $action = "A_$action";
-}    
-
-perl_action_tcp_helper( $action, '-p 6 ! --syn' );
-
-1;
-
-?end perl;
+@1	 -	-	;;+  -p 6 ! --syn

Shorewall/action.RST

@@ -1,50 +1,33 @@
 #
-# Shorewall 4 - RST Action
+# Shorewall -- /usr/share/shorewall/action.RST
 #
-#    /usr/share/shorewall/action.RST
+# RST Action
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2012 - Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
 #
-#       Complete documentation is available at http://shorewall.net
+# Complete documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#   RST[([<action>])]
+# RST[([<action>])]
 #
-#       Default action is DROP
+# Default action is DROP
 #
-##########################################################################################
+###############################################################################
 
 DEFAULTS DROP,-
 
-?begin perl;
-
-use Shorewall::Config;
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my ( $action, $audit ) = get_action_params( 2 );
-
-if ( supplied $audit ) {
-     fatal_error "Invalid parameter ($audit) to action RST" if $audit ne 'audit';
-     $action = "A_$action";
-}    
-
-perl_action_tcp_helper( $action, '-p 6 --tcp-flags RST RST' );
-
-1;
-
-?end perl;
+@1	 -	-	;;+ -p 6 --tcp-flags RST RST

Shorewall/action.Reject

@@ -1,58 +1,44 @@
 #
-# Shorewall version 5 - Reject Action
+# Shorewall -- /usr/share/shorewall/action.Reject
 #
-# /usr/share/shorewall/action.Reject
+# The default REJECT action common rules
 #
-#	The default REJECT action common rules
+# This action is invoked before a REJECT policy is enforced. The purpose
+# of the action is:
 #
-#	This action is invoked before a REJECT policy is enforced. The purpose
-#	of the action is:
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
 #
-#	a) Avoid logging lots of useless cruft.
-#	b) Ensure that certain ICMP packets that are necessary for successful
-#	   internet operation are always ACCEPTed.
+# The action accepts six optional parameters:
 #
-#  The action accepts five optional parameters:
-#
-#	1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
-#           actions.
-#       2 - Action to take with Auth requests. Default is to do nothing
-#	    special with them.
-#	3 - Action to take with SMB requests. Default is REJECT or A_REJECT,
-#           depending on the setting of the first parameter.
-#       4 - Action to take with required ICMP packets. Default is ACCEPT or
-#           A_ACCEPT depending on the first parameter.
-#       5 - Action to take with late UDP replies (UDP source port 53). Default
-#           is DROP or A_DROP depending on the first parameter.
+# 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
+#     actions.
+# 2 - Action to take with Auth requests. Default is to do nothing
+#     special with them.
+# 3 - Action to take with SMB requests. Default is REJECT or A_REJECT,
+#     depending on the setting of the first parameter.
+# 4 - Action to take with required ICMP packets. Default is ACCEPT or
+#     A_ACCEPT depending on the first parameter.
+# 5 - Action to take with late UDP replies (UDP source port 53). Default
+#     is DROP or A_DROP depending on the first parameter.
+# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
+#     depending on the first parameter.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 ###############################################################################
-#
-# The following magic provides different defaults for @2 thru @5, when @1 is
-# 'audit'.
-#
-?begin perl;
-use Shorewall::Config;
 
-my ( $p1, $p2, $p3 , $p4, $p5 ) = get_action_params( 5 );
+?if passed(@1)
+    ?if @1 eq 'audit'
+DEFAULTS -,-,A_REJECT,A_ACCEPT,A_DROP,A_DROP
+    ?else
+	?error The first parameter to Reject must be 'audit' or '-'
+    ?endif
+?else
+DEFAULTS -,-,REJECT,ACCEPT,DROP,DROP
+?endif
 
-if ( defined $p1 ) {
-    if ( $p1 eq 'audit' ) {
-	set_action_param( 3, 'A_REJECT')  unless supplied $p3;
-	set_action_param( 4, 'A_ACCEPT' ) unless supplied $p4;
-	set_action_param( 5, 'A_DROP' )   unless supplied $p5;
-    } else {
-	fatal_error "Invalid value ($p1) for first Reject parameter" if supplied $p1;
-    }
-}
-
-1;
-
-?end perl;
-
-DEFAULTS -,-,REJECT,ACCEPT,DROP
-
-#TARGET		SOURCE	DEST	PROTO
+#ACTION		SOURCE	DEST	PROTO
 #
 # Count packets that come through here
 #
@@ -60,19 +46,22 @@ COUNT
 #
 # Special handling for Auth
 #
-?if @2 ne '-'
+?if passed(@2)
 Auth(@2)
 ?endif
 #
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before silent broadcast Drop.
+#
+AllowICMPs(@4)	-	-	icmp
+#
 # Drop Broadcasts so they don't clutter up the log
 # (broadcasts must *not* be rejected).
 #
 Broadcast(DROP,@1)
 #
-# ACCEPT critical ICMP types
-#
-AllowICMPs(@4)	-	-	icmp
-#
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log (these ICMPs cannot be
 # rejected).
@@ -82,7 +71,7 @@ Invalid(DROP,@1)
 # Reject Microsoft noise so that it doesn't clutter up the log.
 #
 SMB(@3)
-DropUPnP(@5)
+DropUPnP(@6)
 #
 # Drop 'newnotsyn' traffic so that it doesn't get logged.
 #

Shorewall/action.Related

@@ -1,49 +1,35 @@
 #
-# Shorewall 4 - Related Action
+# Shorewall -- /usr/share/shorewall/action.Related
 #
-#    /usr/share/shorewall/action.Related
+# Related Action
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2011,2012 - Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#       Complete documentation is available at http://shorewall.net
+# Complete documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#   Related[([<action>])]
+# Related[([<action>])]
 #
-#       Default action is DROP
+# Default action is DROP
 #
-##########################################################################################
+###############################################################################
 
 DEFAULTS DROP
 
-?begin perl;
-
-use strict;
-use Shorewall::IPAddrs;
-use Shorewall::Config;
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my ( $action ) = get_action_params( 1 );
-
-if ( my $check = check_state( 'RELATED' ) ) {
-    perl_action_helper( $action, $check == 1 ? state_match( 'RELATED' ) : '', 'RELATED' );
-}
-
-1;
-
-?end perl;
+#
+# All logic for this action is supplied by the 'state' option in actions.std
+#

Shorewall/action.ResetEvent

@@ -1,22 +1,24 @@
 #
-# Shorewall version 5 - Reset an Event
+# Shorewall -- /etc/shorewall/action.ResetEvent
 #
-# /etc/shorewall/action.ResetEvent
+# Reset an Event
 #
 # Parameters:
-#    Event:       Must start with a letter and be composed of letters, digits, '-', and '_'.
-#    Action:      Action to perform after setting the event. Default is ACCEPT
-#    Src or Dest: 'src' (default) or 'dst'. Determines if the event is associated with the source
-#                 address (src) or destination address (dst)
-#    Disposition: Disposition for any rule generated.
+#
+# Event       - Must start with a letter and be composed of letters, digits,
+#               '-', and '_'.
+# Action      - Action to perform after setting the event. Default is ACCEPT
+# Src or Dest - 'src' (default) or 'dst'. Determines if the event is
+#               associated with the source address (src) or destination
+#               address (dst)
+# Disposition - Disposition for any rule generated.
 #
 # For additional information, see http://www.shorewall.net/Events.html
 #
-#######################################################################################################
-#                                         DO NOT REMOVE THE FOLLOWING LINE
-#################################################################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK	CONNLIMIT	TIME         HEADERS         SWITCH        HELPER
-#							PORT	PORT(S)		DEST		LIMIT		GROUP
+###############################################################################
+#                        DO NOT REMOVE THE FOLLOWING LINE
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
 
 DEFAULTS -,ACCEPT,src,-
 

Shorewall/action.SetEvent

@@ -1,22 +1,20 @@
 #
-# Shorewall version 5 - Set an Event
+# Shorewall -- /usr/share/shorewall/action.SetEvent
 #
-# /etc/shorewall/action.SetEvent
+# Set an Event
 #
 # Parameters:
-#    Event:       Must start with a letter and be composed of letters, digits, '-', and '_'.
-#    Action:      Action to perform after setting the event. Default is ACCEPT
-#    Src or Dest: 'src' (default) or 'dst'. Determines if the event is associated with the source
-#                 address (src) or destination address (dst)
-#    Disposition: Disposition for any event generated.
+#
+# Event       - Must start with a letter and be composed of letters, digits,
+#               '-', and '_'.
+# Action      - Action to perform after setting the event. Default is ACCEPT
+# Src or Dest - 'src' (default) or 'dst'. Determines if the event is
+#               associated with the source address (src) or destination
+#               address (dst)
+# Disposition - Disposition for any event generated.
 #
 # For additional information, see http://www.shorewall.net/Events.html
 #
-#######################################################################################################
-#                                         DO NOT REMOVE THE FOLLOWING LINE
-#################################################################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK	CONNLIMIT	TIME         HEADERS         SWITCH        HELPER
-#							PORT	PORT(S)		DEST		LIMIT		GROUP
 
 DEFAULTS -,ACCEPT,src
 

Shorewall/action.TCPFlags

@@ -1,41 +1,29 @@
 #
-# Shorewall version 5 - Drop TCPFlags Action
+# Shorewall -- /usr/share/shorewall/action.TCPFlags
 #
-# /usr/share/shorewall/action.TCPFlags
+# Drop TCPFlags Action
 #
-#   Accepts a single optional parameter:
+# Accepts a single optional parameter:
 #
-#          -     = Do not Audit
-#          audit = Audit dropped packets.
+# -     = Do not Audit
+# audit = Audit dropped packets.
 #
-#################################################################################
+###############################################################################
 
 DEFAULTS -
 
-?begin perl;
-use strict;
-use Shorewall::Config qw(:DEFAULT F_IPV4 F_IPV6);
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my $action = 'DROP';
-
-my ( $audit ) = get_action_params( 1 );
-
-if ( supplied $audit ) {
-     fatal_error "Invalid parameter ($audit) to action TCPFlags" if $audit ne 'audit';
-     $action = "A_DROP";
-}    
-
-perl_action_tcp_helper( $action, '-p tcp --tcp-flags ALL FIN,URG,PSH' );
-perl_action_tcp_helper( $action, '-p tcp --tcp-flags ALL NONE' );
-perl_action_tcp_helper( $action, '-p tcp --tcp-flags SYN,RST SYN,RST' );
-perl_action_tcp_helper( $action, '-p tcp --tcp-flags SYN,FIN SYN,FIN' );
-perl_action_tcp_helper( $action, '-p tcp --syn --sport 0' );
-
-?end perl;
-
-
-
-
+?if passed(@1)
+    ?if @1 eq 'audit'
+        ?set tcpflags_action 'A_DROP'
+    ?else
+	?error The parameter to TCPFlags must be 'audit' or '-'
+    ?endif
+?else
+    ?set tcpflags_action 'DROP'
+?endif
 
+$tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL FIN,URG,PSH
+$tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL NONE
+$tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,RST SYN,RST
+$tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,FIN SYN,FIN
+$tcpflags_action	-	-	;;+ -p tcp --syn --sport 0

Shorewall/action.Untracked

@@ -1,47 +1,35 @@
 #
-# Shorewall 4 - Untracked Action
+# Shorewall --/usr/share/shorewall/action.Untracked
 #
-#    /usr/share/shorewall/action.Untracked
+# Untracked Action
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2011,2012 - Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#       Complete documentation is available at http://shorewall.net
+# Complete documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#   Untracked[([<action>])]
+# Untracked[([<action>])]
 #
-#       Default action is DROP
+# Default action is DROP
 #
-##########################################################################################
+###############################################################################
+
 DEFAULTS DROP
 
-?begin perl;
-
-use Shorewall::IPAddrs;
-use Shorewall::Config;
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my ( $action ) = get_action_params( 1 );
-
-if ( my $check = check_state( 'UNTRACKED' ) ) {
-    perl_action_helper( $action, $check == 1 ? state_match( 'UNTRACKED' ) : '' , 'UNTRACKED' );
-}
-
-1;
-
-?end perl;
+#
+# All logic for this action is supplied by the 'state' option in actions.std
+#

Shorewall/action.allowInvalid

@@ -1,52 +1,37 @@
-\#
-# Shorewall 4 - allowInvalid Action
 #
-#    /usr/share/shorewall/action.allowInvalid
+# Shorewall -- /usr/share/shorewall/action.allowInvalid
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2011 - Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#       Complete documentation is available at http://shorewall.net
+# Complete documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#   allowInvalid[([audit])]
+#  allowInvalid[([audit])]
 #
-##########################################################################################
+###############################################################################
 
 DEFAULTS -
 
-?begin perl;
-
-use strict;
-use Shorewall::IPAddrs;
-use Shorewall::Config;
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my $action = 'ACCEPT';
-
-my ( $audit ) = get_action_params( 1 );
-
-if ( supplied $audit ) {
-     fatal_error "Invalid parameter ($audit) to action allowInvalid" if $audit ne 'audit';
-     $action = "A_ACCEPT";
-}    
-
-perl_action_helper( "Invalid($action)", '' );
-
-1;
-
-?end perl;
+?if passed(@1)
+    ?if @1 eq 'audit'
+Invalid(A_ACCEPT)
+    ?else
+        ?error The first parameter to allowInvalid must be 'audit' or '-'
+    ?endif
+?else
+Invalid(ACCEPT)
+?endif

Shorewall/action.dropInvalid

@@ -1,52 +1,39 @@
 #
-# Shorewall 5 - dropInvalid Action
+# Shorewall -- /usr/share/shorewall/action.dropInvalid
 #
-#    /usr/share/shorewall/action.dropInvalid
+# dropInvalid Action
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2011 - Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
 #
-#       Complete documentation is available at http://shorewall.net
+# Complete documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#   dropInvalid[([audit])]
+# dropInvalid[([audit])]
 #
-##########################################################################################
+###############################################################################
 
 DEFAULTS -
 
-?begin perl;
-
-use strict;
-use Shorewall::IPAddrs;
-use Shorewall::Config;
-use Shorewall::Chains;
-use Shorewall::Rules;
-
-my $action = 'DROP';
-
-my ( $audit ) = get_action_params( 1 );
-
-if ( supplied $audit ) {
-     fatal_error "Invalid parameter ($audit) to action dropInvalid" if $audit ne 'audit';
-     $action = "A_DROP";
-}    
-
-perl_action_helper( "Invalid($action)", '' );
-
-1;
-
-?end perl;
+?if passed(@1)
+    ?if @1 eq 'audit'
+Invalid(A_DROP)
+    ?else
+        ?error The first parameter to dropInvalid must be 'audit' or '-'
+    ?endif
+?else
+Invalid(DROP)
+?endif

Shorewall/action.mangletemplate

@@ -0,0 +1,22 @@
+#
+# Shorewall -- /etc/shorewall/action.mangletemplate
+#
+# Mangle Action Template
+#
+# This file is a template for files with names of the form
+# /etc/shorewall/action.<action-name> where <action> is an
+# ACTION defined with the mangle option in /etc/shorewall/actions.
+#
+# To define a new action:
+#
+# 1. Add the <action name> to /etc/shorewall/actions with the mangle option
+# 2. Copy this file to /etc/shorewall/action.<action name>
+# 3. Add the desired rules to that file.
+#
+# Please see http://shorewall.net/Actions.html for additional
+# information.
+#
+# Columns are the same as in /etc/shorewall/mangle.
+#
+####################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	USER	TEST	LENGTH	TOS	CONNBYTES	HELPER	PROBABILITY	DSCP

Shorewall/action.template

@@ -1,20 +1,20 @@
 #
-# Shorewall version 5 - Action Template
+# Shorewall -- /usr/share/shorewall/action.template
 #
-# /etc/shorewall/action.template
+# Action Template
 #
-#	This file is a template for files with names of the form
-#	/etc/shorewall/action.<action-name> where <action> is an
-#	ACTION defined in /etc/shorewall/actions.
+# This file is a template for files with names of the form
+# /etc/shorewall/action.<action-name> where <action> is an
+# ACTION defined in /etc/shorewall/actions.
 #
-#	To define a new action:
+# To define a new action:
 #
-#	1. Add the <action name> to /etc/shorewall/actions
-#	2. Copy this file to /etc/shorewall/action.<action name>
-#	3. Add the desired rules to that file.
+# 1. Add the <action name> to /etc/shorewall/actions
+# 2. Copy this file to /etc/shorewall/action.<action name>
+# 3. Add the desired rules to that file.
 #
-#	Please see http://shorewall.net/Actions.html for additional
-#	information.
+# Please see http://shorewall.net/Actions.html for additional
+# information.
 #
 # Columns are the same as in /etc/shorewall/rules.
 #

Shorewall/actions.std

@@ -8,43 +8,45 @@
 #
 # Builtin Actions are:
 #
-#    A_ACCEPT           # Audits then accepts a connection request
-#    A_DROP             # Audits then drops a connection request
-#    A_REJECT		# Audits then drops a connection request
-#    allowBcast		# Silently Allow Broadcast/multicast
-#    dropBcast		# Silently Drop Broadcast/multicast
-#    dropNotSyn		# Silently Drop Non-syn TCP packets
-#    rejNotSyn		# Silently Reject Non-syn TCP packets
-#    allowoutUPnP	# Allow traffic from local command 'upnpd' (does not
-#                       # work with kernel 2.6.14 and later).
-#    allowinUPnP	# Allow UPnP inbound (to firewall) traffic
-#    forwardUPnP	# Allow traffic that upnpd has redirected from
-#			# 'upnp' interfaces.
-#    Limit              # Limit the rate of connections from each individual
-#                       # IP address
-#
+?if 0
+A_ACCEPT                        # Audits then accepts a connection request
+A_DROP                          # Audits then drops a connection request
+allowBcast		        # Silently Allow Broadcast/multicast
+dropBcast		        # Silently Drop Broadcast/multicast
+dropNotSyn		        # Silently Drop Non-syn TCP packets
+rejNotSyn		        # Silently Reject Non-syn TCP packets
+allowinUPnP	                # Allow UPnP inbound (to firewall) traffic
+forwardUPnP	                # Allow traffic that upnpd has redirected from 'upnp' interfaces.
+Limit                           # Limit the rate of connections from each individual IP address
+?endif
 ###############################################################################
 #ACTION
 A_Drop 		                # Audited Default Action for DROP policy
+A_REJECT     noinline,logjump   # Audits then rejects a connection request
+A_REJECT!    inline             # Audits then rejects a connection request
 A_Reject	                # Audited Default action for REJECT policy
 allowInvalid inline		# Accepts packets in the INVALID conntrack state
 AutoBL       noinline           # Auto-blacklist IPs that exceed thesholds
 AutoBLL      noinline           # Helper for AutoBL
-Broadcast    noinline           # Handles Broadcast/Multicast/Anycast
+Broadcast    noinline,audit     # Handles Broadcast/Multicast/Anycast
 DNSAmp                          # Matches one-question recursive DNS queries
 Drop		                # Default Action for DROP policy
 dropInvalid  inline		# Drops packets in the INVALID conntrack state
 DropSmurfs   noinline           # Drop smurf packets
-Established  inline		# Handles packets in the ESTABLISHED state
+Established  inline,\		# Handles packets in the ESTABLISHED state
+	     state=ESTABLISHED  #
 GlusterFS    inline		# Handles GlusterFS
 IfEvent      noinline           # Perform an action based on an event
-Invalid      inline             # Handles packets in the INVALID conntrack state
-New	     inline             # Handles packets in the NEW conntrack state
-NotSyn       inline             # Handles TCP packets which do not have SYN=1 and ACK=0
+Invalid      inline,audit,\     # Handles packets in the INVALID conntrack state
+             state=INVALID      #
+New	     inline,state=NEW	# Handles packets in the NEW conntrack state
+NotSyn       inline,audit       # Handles TCP packets which do not have SYN=1 and ACK=0
 Reject                          # Default Action for REJECT policy
-Related      inline             # Handles packets in the RELATED conntrack state
+Related      inline,\		# Handles packets in the RELATED conntrack state
+             state=RELATED      #
 ResetEvent   inline		# Reset an Event
-RST	     inline             # Handle packets with RST set
+RST	     inline,audit       # Handle packets with RST set
 SetEvent     inline		# Initialize an event
 TCPFlags    			# Handle bad flag combinations.
-Untracked    inline             # Handles packets in the UNTRACKED conntrack state
+Untracked    inline,\           # Handles packets in the UNTRACKED conntrack state
+	     state=UNTRACKED    #

Shorewall/configfiles/shorewall.conf

@@ -17,6 +17,18 @@ STARTUP_ENABLED=No
 
 VERBOSITY=1
 
+###############################################################################
+#			        P A G E R
+###############################################################################
+
+PAGER=
+
+###############################################################################
+#			     F I R E W A L L
+###############################################################################
+
+FIREWALL=
+
 ###############################################################################
 #			       L O G G I N G
 ###############################################################################
@@ -122,16 +134,14 @@ ADD_SNAT_ALIASES=No
 
 ADMINISABSENTMINDED=Yes
 
-BASIC_FILTERS=No
-
-IGNOREUNKNOWNVARIABLES=No
-
 AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
 AUTOMAKE=No
 
+BASIC_FILTERS=No
+
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
 CHAIN_SCRIPTS=Yes
@@ -150,6 +160,8 @@ DETECT_DNAT_IPADDRS=No
 
 DISABLE_IPV6=No
 
+DOCKER=No
+
 DONT_LOAD=
 
 DYNAMIC_BLACKLIST=Yes
@@ -164,6 +176,8 @@ FORWARD_CLEAR_MARK=
 
 HELPERS=
 
+IGNOREUNKNOWNVARIABLES=No
+
 IMPLICIT_CONTINUE=No
 
 INLINE_MATCHES=No
@@ -186,6 +200,8 @@ MAPOLDACTIONS=No
 
 MARK_IN_FORWARD_CHAIN=No
 
+MINIUPNPD=No
+
 MODULE_SUFFIX=ko
 
 MULTICAST=No
@@ -232,10 +248,14 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No
 
+ZERO_MARKS=No
+
 ZONE2ZONE=-
 
 ###############################################################################

Shorewall/init.debian.sh

@@ -4,7 +4,7 @@
 # Required-Start:    $network $remote_fs
 # Required-Stop:     $network $remote_fs
 # Default-Start:     S
-# Default-Stop:      0 6
+# Default-Stop:      0 1 6
 # Short-Description: Configure the firewall at boot time
 # Description:       Configure the firewall according to the rules specified in
 #                    /etc/shorewall
@@ -97,10 +97,11 @@ shorewall_start () {
 
 # stop the firewall
 shorewall_stop () {
-  echo -n "Stopping \"Shorewall firewall\": "
   if [ "$SAFESTOP" = 1 ]; then
+      echo -n "Stopping \"Shorewall firewall\": "
       $SRWL $SRWL_OPTS stop >> $INITLOG 2>&1 && echo "done." || echo_notdone
   else
+      echo -n "Clearing all \"Shorewall firewall\" rules: "
       $SRWL $SRWL_OPTS clear >> $INITLOG 2>&1 && echo "done." || echo_notdone
   fi
   return 0
@@ -145,7 +146,7 @@ case "$1" in
   restart)
      shorewall_restart
      ;;
-  force0reload|reload)
+  force-reload|reload)
      shorewall_reload
      ;;
   status)

Shorewall/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall
 #
-#     (c) 2000-201,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -419,11 +419,13 @@ mkdir -p ${DESTDIR}${CONFDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${PERLLIBDIR}/Shorewall
 mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles
+mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated
 mkdir -p ${DESTDIR}${VARDIR}
 
 chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
 chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
 chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT/configfiles
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated
 
 if [ -n "$DESTDIR" ]; then
     mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
@@ -512,7 +514,7 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 # Install the Standard Actions file
 #
 install_file actions.std ${DESTDIR}${SHAREDIR}/$PRODUCT/actions.std 0644
-echo "Standard actions file installed as ${DESTDIR}${SHAREDIR}d/$PRODUCT/actions.std"
+echo "Standard actions file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/actions.std"
 
 cd configfiles
 
@@ -1060,15 +1062,31 @@ fi
 # Install the Action files
 #
 for f in action.* ; do
-    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-    echo "Action ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+    case $f in
+	*.deprecated)
+	    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated/${f%.*} 0644
+	    echo "Action ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated/${f%.*}"
+	    ;;
+	*)
+	    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+	    echo "Action ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+	    ;;
+    esac
 done
 
 cd Macros
 
 for f in macro.* ; do
-    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-    echo "Macro ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+    case $f in
+	*.deprecated)
+	    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated/${f%.*} 0644
+	    echo "Macro ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/deprecated/${f%.*}"
+	    ;;
+	*)
+	    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+	    echo "Macro ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+	    ;;
+    esac
 done
 
 cd ..
@@ -1159,6 +1177,8 @@ fi
 # Install the Man Pages
 #
 
+if [ -n "$MANDIR" ]; then
+
 cd manpages
 
 [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
@@ -1178,6 +1198,7 @@ done
 cd ..
 
 echo "Man Pages Installed"
+fi
 
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
     run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
@@ -1194,7 +1215,7 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
     fi
 
     run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT
-    echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+    echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then

Shorewall/lib.cli-std

@@ -316,6 +316,29 @@ get_config() {
 
     g_loopback=$(find_loopback_interfaces)
 
+    [ -n "$PAGER" ] || PAGER=$DEFAULT_PAGER
+
+    if [ -n "$PAGER" -a -t 1 ]; then
+	case $PAGER in
+	    /*)
+		g_pager="$PAGER"
+		[ -f "$g_pager" ] || fatal_error "PAGER $PAGER does not exist"
+		;;
+	    *)
+		g_pager=$(mywhich $PAGER 2> /dev/null)
+		[ -n "$g_pager" ] || fatal_error "PAGER $PAGER not found"
+		;;
+	esac
+
+	[ -x "$g_pager" ] || fatal_error "PAGER $g_pager is not executable"
+
+	g_pager="| $g_pager"
+    fi
+
+    if [ -n "$DYNAMIC_BLACKLIST" ]; then
+	setup_dbl
+    fi
+
     lib=$(find_file lib.cli-user)
 
     [ -f $lib ] && . $lib
@@ -386,7 +409,7 @@ compiler() {
     get_config Yes
 
     case $COMMAND in
-	*start|try|refresh)
+	*start|try|refresh|reload|restart|safe-*)
 	    ;;
 	*)
 	    STARTUP_LOG=
@@ -444,20 +467,24 @@ compiler() {
 
     case "$g_doing" in
 	Compiling|Checking)
-	    progress_message3 "$g_doing using $g_product $SHOREWALL_VERSION..."
+	    progress_message3 "$g_doing using Shorewall $SHOREWALL_VERSION..."
 	    ;;
 	Updating)
 	    progress_message3 "Updating $g_product configuration to $SHOREWALL_VERSION..."
 	    ;;
 	*)
-	    [ -n "$g_doing" ] && progress_message3 "$g_doing using $g_product $SHOREWALL_VERSION..."
+	    [ -n "$g_doing" ] && progress_message3 "$g_doing using Shorewall $SHOREWALL_VERSION..."
 	    ;;
     esac
+    #
+    # Only use the pager if 'trace' or -r was specified and -d was not
+    #
+    [ "$g_debugging" != trace -a -z "$g_preview" ] || [ -n "$g_debug" ] && g_pager=
 
     if [ ${PERLLIBDIR} = ${LIBEXECDIR}/shorewall ]; then
-	$PERL $debugflags $pc $options $@
+	eval $PERL $debugflags $pc $options $@ $g_pager
     else
-	PERL5LIB=${PERLLIBDIR} $PERL $debugflags $pc $options $@
+	eval PERL5LIB=${PERLLIBDIR} $PERL $debugflags $pc $options $@ $g_pager
     fi
 
     status=$?
@@ -477,7 +504,6 @@ compiler() {
 start_command() {
     local finished
     finished=0
-    local object
     local rc
     rc=0
 
@@ -496,7 +522,7 @@ start_command() {
 		[ -n "$nolock" ] || mutex_off
 	    else
 		rc=$?
-		logger -p kern.err "ERROR:$g_product start failed"
+		mylogger kern.err "ERROR:$g_product start failed"
 	    fi
 	fi
 
@@ -552,7 +578,7 @@ start_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -568,7 +594,8 @@ start_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" -o -n "$g_fast" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
+	    [ -n "$g_fast" ]         && fatal_error "Directory may not be specified with the -f option"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -582,12 +609,12 @@ start_command() {
 	    AUTOMAKE=
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
     if [ -n "${g_fast}${AUTOMAKE}" ]; then
-	if ! uptodate ${VARDIR}/$object; then
+	if ! uptodate ${VARDIR}/firewall; then
 	    g_fast=
 	    AUTOMAKE=
 	fi
@@ -611,8 +638,6 @@ compile_command() {
 		shift
 		option=${option#-}
 
-		[ -z "$option" ] && usage 1
-
 		while [ -n "$option" ]; do
 		    case $option in
 			e*)
@@ -649,7 +674,7 @@ compile_command() {
 			    option=
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -671,7 +696,7 @@ compile_command() {
 	    [ -d "$g_file" ] && fatal_error "$g_file is a directory"
 	    ;;
 	2)
-	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && usage 2
+	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -685,7 +710,7 @@ compile_command() {
 	    g_file=$2
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -739,7 +764,7 @@ check_command() {
 			    option=${option#i}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -755,7 +780,7 @@ check_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && usage 2
+	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -768,7 +793,7 @@ check_command() {
 	    g_shorewalldir=$(resolve_file $1)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -831,7 +856,7 @@ update_command() {
 			    option=${option#A}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -847,7 +872,7 @@ update_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -860,7 +885,7 @@ update_command() {
 	    g_shorewalldir=$(resolve_file $1)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -925,7 +950,7 @@ restart_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -941,7 +966,7 @@ restart_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -956,7 +981,7 @@ restart_command() {
 	    AUTOMAKE=
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -976,7 +1001,7 @@ restart_command() {
 	    [ -n "$nolock" ] || mutex_off
 	else
 	    rc=$?
-	    logger -p kern.err "ERROR:$g_product ${COMMAND} failed"
+	    mylogger kern.err "ERROR:$g_product ${COMMAND} failed"
 	fi
     else
 	[ -x ${VARDIR}/firewall ] || fatal_error "No ${VARDIR}/firewall file found"
@@ -1034,7 +1059,7 @@ refresh_command() {
 			    fi
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1117,7 +1142,7 @@ safe_commands() {
 			    shift;
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1133,7 +1158,7 @@ safe_commands() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -1146,7 +1171,7 @@ safe_commands() {
 	    g_shorewalldir=$(resolve_file $1)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -1234,7 +1259,7 @@ try_command() {
     timeout=
 
     handle_directory() {
-	[ -n "$g_shorewalldir" ] && usage 2
+	[ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	if [ ! -d $1 ]; then
 	    if [ -e $1 ]; then
@@ -1264,7 +1289,7 @@ try_command() {
 			    option=${option#n}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1278,7 +1303,7 @@ try_command() {
 
     case $# in
 	0)
-	    usage 1
+	    missing_argument
 	    ;;
 	1)
 	    handle_directory $1
@@ -1289,7 +1314,7 @@ try_command() {
 	    timeout=$2
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -1419,6 +1444,12 @@ remote_reload_command() # $* = original arguments less the command.
 			    option=
 			    shift
 			    ;;
+			D)
+			    [ $# -gt 1 ] || fatal_error "Missing directory name"
+			    g_shorewalldir=$2
+			    option=
+			    shift
+			    ;;
 			T*)
 			    g_confess=Yes
 			    option=${option#T}
@@ -1428,7 +1459,7 @@ remote_reload_command() # $* = original arguments less the command.
 			    option=${option#i}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1441,6 +1472,9 @@ remote_reload_command() # $* = original arguments less the command.
     done
 
     case $# in
+	0)
+	    [ -n "$g_shorewalldir" ] || g_shorewalldir='.'
+	    ;;
 	1)
 	    g_shorewalldir="."
 	    system=$1
@@ -1450,7 +1484,7 @@ remote_reload_command() # $* = original arguments less the command.
 	    system=$2
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -1474,6 +1508,11 @@ remote_reload_command() # $* = original arguments less the command.
 	get_config No
 
 	g_haveconfig=Yes
+
+	if [ -z "$system" ]; then
+	    system=$FIREWALL
+	    [ -n "$system" ] || fatal_error "No system name given and the FIREWALL option is not set"
+	fi
     else
 	fatal_error "$g_shorewalldir/$g_program.conf does not exist"
     fi
@@ -1690,7 +1729,7 @@ compiler_command() {
 	    safe_commands $@
 	    ;;
 	*)
-	    usage 1
+	    fatal_error "Invalid command: $COMMAND"
 	    ;;
     esac
 

Shorewall/manpages/shorewall-actions.xml

@@ -53,7 +53,19 @@
 
           <variablelist>
             <varlistentry>
-              <term>builtin</term>
+              <term><option>audit</option></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.7. When this option is specified,
+                the action is expected to have at least two parameters; the
+                first is a target and the second is either 'audit' or omitted.
+                If the second is 'audit', then the first must be an auditable
+                target (ACCEPT, DROP or REJECT).</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><option>builtin</option></term>
 
               <listitem>
                 <para>Added in Shorewall 4.5.16. Defines the action as a rule
@@ -86,7 +98,7 @@
             </varlistentry>
 
             <varlistentry>
-              <term>inline</term>
+              <term><option>inline</option></term>
 
               <listitem>
                 <para>Causes the action body (defined in
@@ -102,10 +114,10 @@
                   way:</para>
 
                   <simplelist>
-                    <member>Broadcast</member>
-
                     <member>DropSmurfs</member>
 
+                    <member>IfEvent</member>
+
                     <member>Invalid (Prior to Shorewall 4.5.13)</member>
 
                     <member>NotSyn (Prior to Shorewall 4.5.13)</member>
@@ -119,7 +131,31 @@
             </varlistentry>
 
             <varlistentry>
-              <term>noinline</term>
+              <term><option>logjump</option></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.8. Performs the same function as
+                <option>nolog</option> (below), with the addition that the
+                jump to the actions chain is logged if a log level is
+                specified on the action invocation. For inline actions, this
+                option is identical to <option>nolog</option>.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><option>mangle</option></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.7. Specifies that this action is
+                to be used in <ulink
+                url="shorewall-mangle.html">shorewall-mangle(5)</ulink> rather
+                than <ulink
+                url="shorewall-rules.html">shorewall-rules(5)</ulink>.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><option>noinline</option></term>
 
               <listitem>
                 <para>Causes any later <option>inline</option> option for the
@@ -128,7 +164,7 @@
             </varlistentry>
 
             <varlistentry>
-              <term>nolog</term>
+              <term><option>nolog</option></term>
 
               <listitem>
                 <para>Added in Shorewall 4.5.11. When this option is
@@ -142,7 +178,16 @@
             </varlistentry>
 
             <varlistentry>
-              <term>terminating</term>
+              <term><option>state</option>={<option>UNTRACKED</option>|<option>NEW</option>|<option>ESTABLISHED</option>|<option>RELATED</option>|<option>INVALID</option>}</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.7. Reserved for use by Shorewall
+                in <filename>actions.std</filename>.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><option>terminating</option></term>
 
               <listitem>
                 <para>Added in Shorewall 4.6.4. When used with

Shorewall/manpages/shorewall-interfaces.xml

@@ -306,6 +306,72 @@ loc     eth2            -</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">dbl={none|src|dst|src-dst}</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.10. This option defined whether
+                or not dynamic blacklisting is applied to packets entering the
+                firewall through this interface and whether the source address
+                and/or destination address is to be compared against the
+                ipset-based dynamic blacklist (DYNAMIC_BLACKLIST=ipset... in
+                <ulink
+                url="manpages/shorewall.conf.html">shorewall.conf(5)</ulink>).
+                The default is determine by the setting of
+                DYNAMIC_BLACKLIST:</para>
+
+                <variablelist>
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=No</term>
+
+                    <listitem>
+                      <para>Default is <emphasis role="bold">none</emphasis>
+                      (e.g., no dynamic blacklist checking).</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=Yes</term>
+
+                    <listitem>
+                      <para>Default is <emphasis role="bold">src</emphasis>
+                      (e.g., the source IP address is checked).</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=ipset[-only]</term>
+
+                    <listitem>
+                      <para>Default is <emphasis
+                      role="bold">src</emphasis>.</para>
+                    </listitem>
+                  </varlistentry>
+
+                  <varlistentry>
+                    <term>DYNAMIC_BLACKLIST=ipset[-only],src-dst...</term>
+
+                    <listitem>
+                      <para>Default is <emphasis
+                      role="bold">src-dst</emphasis> (e.g., the source IP
+                      addresses in checked against the ipset on input and the
+                      destination IP address is checked against the ipset on
+                      packets originating from the firewall and leaving
+                      through this interface).</para>
+                    </listitem>
+                  </varlistentry>
+                </variablelist>
+
+                <para>The normal setting for this option will be <emphasis
+                role="bold">dst</emphasis> or <emphasis
+                role="bold">none</emphasis> for internal interfaces and
+                <emphasis role="bold">src</emphasis> or <emphasis
+                role="bold">src-dst</emphasis> for Internet-facing
+                interfaces.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">destonly</emphasis></term>
 
@@ -348,7 +414,7 @@ loc     eth2            -</programlisting>
                       url="../bridge-Shorewall-perl.html">Shorewall-perl for
                       firewall/bridging</ulink>, then you need to include
                       DHCP-specific rules in <ulink
-                      url="/manpages/shorewall-rules.html">shorewall-rules</ulink>(8).
+                      url="/manpages/shorewall-rules.html">shorewall-rules</ulink>(5).
                       DHCP uses UDP ports 67 and 68.</para>
                     </note>
                   </listitem>
@@ -380,7 +446,7 @@ loc     eth2            -</programlisting>
             </varlistentry>
 
             <varlistentry>
-              <term>loopback</term>
+              <term><emphasis role="bold">loopback</emphasis></term>
 
               <listitem>
                 <para>Added in Shorewall 4.6.6. Designates the interface as
@@ -451,8 +517,8 @@ loc     eth2            -</programlisting>
             </varlistentry>
 
             <varlistentry>
-              <term><emphasis
-              role="bold">mss</emphasis>=<emphasis>number</emphasis></term>
+              <term><emphasis role="bold"><emphasis
+              role="bold">mss</emphasis>=</emphasis><emphasis>number</emphasis></term>
 
               <listitem>
                 <para>Added in Shorewall 4.0.3. Causes forwarded TCP SYN
@@ -488,6 +554,18 @@ loc     eth2            -</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis role="bold">nodbl</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.8. When specified, dynamic
+                blacklisting is disabled on the interface. Beginning with
+                Shorewall 5.0.10, <emphasis role="bold">nodbl</emphasis> is
+                equivalent to <emphasis
+                role="bold">dbl=none</emphasis>.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">nosmurfs</emphasis></term>
 

Shorewall/manpages/shorewall-mangle.xml

@@ -68,8 +68,9 @@
         <replaceable>command</replaceable>[(<replaceable>parameters</replaceable>)][:<replaceable>chain-designator</replaceable>]</term>
 
         <listitem>
-          <para>The chain-specifier indicates the Netfilter chain that the
-          entry applies to and may be one of the following:</para>
+          <para>The <replaceable>chain-designator </replaceable>indicates the
+          Netfilter chain that the entry applies to and may be one of the
+          following:</para>
 
           <variablelist>
             <varlistentry>
@@ -111,10 +112,14 @@
           url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>, and
           FORWARD when MARK_IN_FORWARD_CHAIN=Yes.</para>
 
-          <para>A chain-designator may not be specified if the SOURCE or DEST
-          columns begin with '$FW'. When the SOURCE is $FW, the generated rule
-          is always placed in the OUTPUT chain. If DEST is '$FW', then the
-          rule is placed in the INPUT chain.</para>
+          <para>A <replaceable>chain-designator</replaceable> may not be
+          specified if the SOURCE or DEST columns begin with '$FW'. When the
+          SOURCE is $FW, the generated rule is always placed in the OUTPUT
+          chain. If DEST is '$FW', then the rule is placed in the INPUT chain.
+          Additionally, a <replaceable>chain-designator</replaceable> may not
+          be specified in an action body unless the action is declared as
+          <option>inline</option> in <ulink
+          url="shorewall6-actions.html">shorewall-actions</ulink>(5).</para>
 
           <para>Where a command takes parameters, those parameters are
           enclosed in parentheses ("(....)") and separated by commas.</para>
@@ -123,6 +128,21 @@
           following.</para>
 
           <variablelist>
+            <varlistentry>
+              <term><emphasis
+              role="bold"><replaceable>action</replaceable>[([<replaceable>param</replaceable>[,...])]</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.7.
+                <replaceable>action</replaceable> must be an action declared
+                with the <option>mangle</option> option in <ulink
+                url="manpages/shorewall-actions.html">shorewall-actions(5)</ulink>.
+                If the action accepts parameters, they are specified as a
+                comma-separated list within parentheses following the
+                <replaceable>action</replaceable> name.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">ADD(<replaceable>ipset</replaceable>:<replaceable>flags</replaceable>)</emphasis></term>
@@ -335,7 +355,20 @@ DIVERTHA        -               -               tcp</programlisting>
     EF   =&gt; 0x2e</programlisting>
 
                 <para>To indicate more than one class, add their hex values
-                together and specify the result.</para>
+                together and specify the result. By default, DSCP rules are
+                placed in the POSTROUTING chain.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><emphasis role="bold">ECN</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.6 as an alternative to entries in
+                <ulink url="shorewall-ecn.html">shorewall-ecn(5)</ulink>. If a
+                PROTO is specified, it must be 'tcp' (6). If no PROTO is
+                supplied, TCP is assumed. This action causes all ECN bits in
+                the TCP header to be cleared.</para>
               </listitem>
             </varlistentry>
 
@@ -358,7 +391,7 @@ DIVERTHA        -               -               tcp</programlisting>
                 <para>Allows you to place your own ip[6]tables matches at the
                 end of the line following a semicolon (";"). If an
                 <replaceable>action</replaceable> is specified, the compiler
-                procedes as if that <replaceable>action</replaceable> had been
+                proceeds as if that <replaceable>action</replaceable> had been
                 specified in this column. If no action is specified, then you
                 may include your own jump ("-j
                 <replaceable>target</replaceable>
@@ -472,7 +505,7 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
 
                     <member>0xc0a80403 LAND 0xFF = 0x03</member>
 
-                    <member>0x03 LOR 0x0x10100 = 0x10103 or class ID
+                    <member>0x03 LOR 0x10100 = 0x10103 or class ID
                     1:103</member>
                   </simplelist>
                 </blockquote>
@@ -566,6 +599,36 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">NFLOG</emphasis>[(<emphasis>nflog-parameters</emphasis>)]</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.9. Logs matching packets using
+                NFLOG. The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1.</para>
+                  </listitem>
+                </itemizedlist>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">RESTORE</emphasis>[(<emphasis>mask</emphasis>)]</term>
@@ -708,33 +771,6 @@ Normal-Service       =&gt; 0x00</programlisting>
               </listitem>
             </varlistentry>
           </variablelist>
-
-          <orderedlist numeration="arabic">
-            <listitem>
-              <para><emphasis role="bold">TTL</emphasis>([<emphasis
-              role="bold">-</emphasis>|<emphasis
-              role="bold">+</emphasis>]<replaceable>number</replaceable>)</para>
-
-              <para>Added in Shorewall 4.4.24.</para>
-
-              <para>Prior to Shorewall 4.5.7.2, may be optionally followed by
-              <emphasis role="bold">:F</emphasis> but the resulting rule is
-              always added to the FORWARD chain. Beginning with Shorewall
-              4.5.7.s, it may be optionally followed by <emphasis
-              role="bold">:P</emphasis>, in which case the rule is added to
-              the PREROUTING chain.</para>
-
-              <para>If <emphasis role="bold">+</emphasis> is included, packets
-              matching the rule will have their TTL incremented by
-              <replaceable>number</replaceable>. Similarly, if <emphasis
-              role="bold">-</emphasis> is included, matching packets have
-              their TTL decremented by <replaceable>number</replaceable>. If
-              neither <emphasis role="bold">+</emphasis> nor <emphasis
-              role="bold">-</emphasis> is given, the TTL of matching packets
-              is set to <replaceable>number</replaceable>. The valid range of
-              values for <replaceable>number</replaceable> is 1-255.</para>
-            </listitem>
-          </orderedlist>
         </listitem>
       </varlistentry>
 
@@ -1219,6 +1255,17 @@ Normal-Service       =&gt; 0x00</programlisting>
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term>contiguous</term>
+
+              <listitem>
+                <para>Added in Shoreawll 5.0.12. When <emphasis
+                role="bold">timestop</emphasis> is smaller than <emphasis
+                role="bold">timestart</emphasis> value, match this as a single
+                time period instead of distinct intervals.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term>utc</term>
 
@@ -1329,7 +1376,7 @@ Normal-Service       =&gt; 0x00</programlisting>
           round-robin fashion between addresses 1.1.1.1, 1.1.1.3, and 1.1.1.9
           (Shorewall 4.5.9 and later).</para>
 
-          <programlisting>/etc/shorewall/tcrules:
+          <programlisting>/etc/shorewall/mangle:
 
        #ACTION            SOURCE         DEST         PROTO   DPORT         SPORT   USER    TEST
        CONNMARK(1-3):F    192.168.1.0/24 eth0 ; state=NEW

Shorewall/manpages/shorewall-policy.xml

@@ -35,7 +35,7 @@
       <para>This file determines what to do with a new connection request if
       we don't get a match from the /etc/shorewall/rules file . For each
       source/destination pair, the file is processed in order until a match is
-      found ("all" will match any client or server).</para>
+      found ("all" will match any source or destination).</para>
     </important>
 
     <important>
@@ -61,7 +61,7 @@
     <variablelist>
       <varlistentry>
         <term><emphasis role="bold">SOURCE</emphasis> -
-        <emphasis>zone</emphasis>|<emphasis
+        <emphasis>zone</emphasis>[,...[+]]|<emphasis
         role="bold">$FW</emphasis>|<emphasis
         role="bold">all</emphasis>|<emphasis
         role="bold">all+</emphasis></term>
@@ -74,12 +74,18 @@
           <para>Support for "all+" was added in Shorewall 4.5.17. "all" does
           not override the implicit intra-zone ACCEPT policy while "all+"
           does.</para>
+
+          <para>Beginning with Shorewall 5.0.12, multiple zones may be listed
+          separated by commas. As above, if '+' is specified after two or more
+          zone names, then the policy overrides the implicit intra-zone ACCEPT
+          policy if the same <replaceable>zone</replaceable> appears in both
+          the SOURCE and DEST columns.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
         <term><emphasis role="bold">DEST</emphasis> -
-        <emphasis>zone</emphasis>|<emphasis
+        <emphasis>zone</emphasis>[,...[+]]|<emphasis
         role="bold">$FW</emphasis>|<emphasis
         role="bold">all</emphasis>|<emphasis
         role="bold">all+</emphasis></term>
@@ -95,6 +101,12 @@
           <para>Support for "all+" was added in Shorewall 4.5.17. "all" does
           not override the implicit intra-zone ACCEPT policy while "all+"
           does.</para>
+
+          <para>Beginning with Shorewall 5.0.12, multiple zones may be listed
+          separated by commas. As above, if '+' is specified after two or more
+          zone names, then the policy overrides the implicit intra-zone ACCEPT
+          policy if the same <replaceable>zone</replaceable> appears in both
+          the SOURCE and DEST columns.</para>
         </listitem>
       </varlistentry>
 

Shorewall/manpages/shorewall-providers.xml

@@ -130,7 +130,7 @@
       <varlistentry>
         <term><emphasis role="bold">GATEWAY</emphasis> - {<emphasis
         role="bold">-</emphasis>|<emphasis>address</emphasis>[,<emphasis>mac</emphasis>]|<emphasis
-        role="bold">detect</emphasis>}</term>
+        role="bold">detect|none</emphasis>}</term>
 
         <listitem>
           <para>The IP address of the provider's gateway router. Beginning
@@ -139,8 +139,12 @@
           interface. When the MAC is not specified, Shorewall will detect the
           MAC during firewall start or restart.</para>
 
-          <para>You can enter "detect" here and Shorewall will attempt to
-          detect the gateway automatically.</para>
+          <para>You can enter <emphasis role="bold">detect</emphasis> here and
+          Shorewall will attempt to detect the gateway automatically.</para>
+
+          <para>Beginning with Shorewall 5.0.6, you may also enter <emphasis
+          role="bold">none</emphasis>. This causes creation of a routing table
+          with no default route in it.</para>
 
           <para>For PPP devices, you may omit this column.</para>
         </listitem>
@@ -402,6 +406,16 @@
                     are present.</para>
                   </listitem>
                 </itemizedlist>
+
+                <note>
+                  <para>The generated script will attempt to reenable a
+                  disabled persistent provider during execution of the
+                  <command>start</command>, <command>restart</command> and
+                  <command>reload</command> commands. When
+                  <option>persistent</option> is not specified, only the
+                  <command>enable</command> and <command>reenable</command>
+                  commands can reenable the provider.</para>
+                </note>
               </listitem>
             </varlistentry>
           </variablelist>

Shorewall/manpages/shorewall-rules.xml

@@ -328,6 +328,18 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">CONMARK({<replaceable>mark</replaceable>})</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.7, CONNMARK is identical to MARK
+                with the exception that the mark is assigned to connection to
+                which the packet belongs is marked rather than to the packet
+                itself.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">CONTINUE</emphasis></term>
 
@@ -546,6 +558,35 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">MARK({<replaceable>mark</replaceable>})</emphasis></term>
+
+              <listitem>
+                <para>where <replaceable>mark</replaceable> is a packet mark
+                value.</para>
+
+                <para>Added in Shorewall 5.0.7, MARK requires "Mark in filter
+                table" support in your kernel and iptables.</para>
+
+                <para>Normally will set the mark value of the current packet.
+                If preceded by a vertical bar ("|"), the mark value will be
+                logically ORed with the current mark value to produce a new
+                mark value. If preceded by an ampersand ("&amp;"), will be
+                logically ANDed with the current mark value to produce a new
+                mark value.</para>
+
+                <para>Both "|" and "&amp;" require Extended MARK Target
+                support in your kernel and iptables.</para>
+
+                <para>The mark value may be optionally followed by "/" and a
+                mask value (used to determine those bits of the connection
+                mark to actually be set). When a mask is specified, the result
+                of logically ANDing the mark value with the mask must be the
+                same as the mark value.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)]</term>
@@ -556,7 +597,29 @@
                 the next rule. See <ulink
                 url="/shorewall.logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
 
-                <para>Similar to<emphasis role="bold">
+                <para>The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1.</para>
+                  </listitem>
+                </itemizedlist>
+
+                <para>NFLOG is similar to<emphasis role="bold">
                 LOG:NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)],
                 except that the log level is not changed when this ACTION is
                 used in an action or macro body and the invocation of that
@@ -590,12 +653,12 @@
 
             <varlistentry>
               <term><emphasis role="bold"><emphasis
-              role="bold">NFQUEUE</emphasis>[([<replaceable>queuenumber1</replaceable>[,<replaceable>queuenumber2</replaceable>][,bypass]]|bypass)]</emphasis></term>
+              role="bold">NFQUEUE!</emphasis>[([<replaceable>queuenumber1</replaceable>[,<replaceable>queuenumber2</replaceable>][,bypass]]|bypass)]</emphasis></term>
 
               <listitem>
                 <para>like NFQUEUE but exempts the rule from being suppressed
                 by OPTIMIZE=1 in <ulink
-                url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5).</para>
+                url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
               </listitem>
             </varlistentry>
 
@@ -631,11 +694,37 @@
             </varlistentry>
 
             <varlistentry>
-              <term><emphasis role="bold">REJECT</emphasis></term>
+              <term><emphasis
+              role="bold">REJECT[(<replaceable>option</replaceable>)]</emphasis></term>
 
               <listitem>
                 <para>disallow the request and return an icmp-unreachable or
-                an RST packet.</para>
+                an RST packet. If no option is passed, Shorewall selects the
+                appropriate option based on the protocol of the packet.</para>
+
+                <para>Beginning with Shorewall 5.0.8, the type of reject may
+                be specified in the <replaceable>option</replaceable>
+                paramater. Valid <replaceable>option</replaceable> values
+                are:</para>
+
+                <simplelist>
+                  <member><option>icmp-net-unreachable</option></member>
+
+                  <member><option>icmp-host-unreachable</option></member>
+
+                  <member><option>i</option><option>cmp-port-unreachable</option></member>
+
+                  <member><option>icmp-proto-unreachable</option></member>
+
+                  <member><option>icmp-net-prohibited</option></member>
+
+                  <member><option>icmp-host-prohibited</option></member>
+
+                  <member><option>icmp-admin-prohibited</option></member>
+
+                  <member><option>icmp-tcp-reset</option> (the PROTO column
+                  must specify TCP)</member>
+                </simplelist>
               </listitem>
             </varlistentry>
 
@@ -1400,7 +1489,7 @@
           <para>When <option>s:</option> or <option>d:</option> is specified,
           the rate applies per source IP address or per destination IP address
           respectively. The <replaceable>name</replaceable>s may be chosen by
-          the user and specifiy a hash table to be used to count matching
+          the user and specify a hash table to be used to count matching
           connections. If not given, the name <emphasis
           role="bold">shorewallN</emphasis> (where N is a unique integer) is
           assumed. Where more than one rule or POLICY specifies the same name,
@@ -1593,6 +1682,17 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term>contiguous</term>
+
+              <listitem>
+                <para>Added in Shoreawll 5.0.12. When <emphasis
+                role="bold">timestop</emphasis> is smaller than <emphasis
+                role="bold">timestart</emphasis> value, match this as a single
+                time period instead of distinct intervals.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term>utc</term>
 

Shorewall/manpages/shorewall-tcclasses.xml

@@ -156,20 +156,23 @@
 
       <varlistentry>
         <term><emphasis role="bold">MARK</emphasis> -
-        {-|<emphasis>value</emphasis>}</term>
+        {-|<replaceable>value</replaceable>[:<replaceable>priority</replaceable>]}</term>
 
         <listitem>
           <para>The mark <emphasis>value</emphasis> which is an integer in the
           range 1-255. You set mark values in the <ulink
           url="/manpages/shorewall-mangle.html">shorewall-mangle</ulink>(5)
           file, marking the traffic you want to fit in the classes defined in
-          here. Must be specified as '-' if the <emphasis
-          role="bold">classify</emphasis> option is given for the interface in
-          <ulink
-          url="/manpages/shorewall-tcdevices.html">shorewall-tcdevices</ulink>(5)
-          and you are running Shorewall 4.5.5 or earlier.</para>
+          here. You can use the same marks for different interfaces.</para>
 
-          <para>You can use the same marks for different interfaces.</para>
+          <para>The <replaceable>priority</replaceable>, if specified, is an
+          integer in the range 1-65535 and determines the relative order in
+          which the tc mark classification filter for this class is to be
+          applied to packets being sent on the
+          <replaceable>interface</replaceable>. Filters are applied in
+          ascending numerical order. If not supplied, the value is derived
+          from the class priority (PRIORITY column value below):
+          (<replaceable>class priority</replaceable> &lt;&lt; 8) | 20.</para>
         </listitem>
       </varlistentry>
 
@@ -293,7 +296,7 @@
                 <para>This is the default class for that interface where all
                 traffic should go, that is not classified otherwise.</para>
 
-                <para></para>
+                <para/>
 
                 <note>
                   <para>You must define <emphasis
@@ -320,7 +323,7 @@
                 priority determines the order in which filter rules are
                 processed during packet classification. If not specified, the
                 value (<replaceable>class priority</replaceable> &lt;&lt; 8) |
-                10) is used.</para>
+                15) is used.</para>
               </listitem>
             </varlistentry>
 
@@ -339,7 +342,7 @@
                 (":") and a <replaceable>priority</replaceable>. This priority
                 determines the order in which filter rules are processed
                 during packet classification. If not specified, the value
-                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 10)
+                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 15)
                 is used.</para>
 
                 <programlisting>        <emphasis role="bold">tos-minimize-delay</emphasis>       0x10/0x10
@@ -372,7 +375,7 @@
                 (":") and a <replaceable>priority</replaceable>. This priority
                 determines the order in which filter rules are processed
                 during packet classification. If not specified, the value
-                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 20)
+                (<replaceable>class priority</replaceable> &lt;&lt; 8) | 10)
                 is used.</para>
 
                 <note>

Shorewall/manpages/shorewall.conf.xml

@@ -307,6 +307,9 @@
                 that were active when Shorewall stopped continue to work and
                 all new connections from the firewall system itself are
                 allowed.</para>
+
+                <para>Note that the routestopped file is not supported in
+                Shorewall 5.0 and later versions.</para>
               </listitem>
             </varlistentry>
 
@@ -481,8 +484,8 @@
 
           <para>ALL sends all packets through the blacklist chains.</para>
 
-          <para>Note: The ESTABLISHED state may not be specified if FASTACCEPT
-          is specified.</para>
+          <para>Note: The ESTABLISHED state may not be specified if
+          FASTACCEPT=Yes is specified.</para>
         </listitem>
       </varlistentry>
 
@@ -577,13 +580,14 @@
         <listitem>
           <para>If this option is set to <emphasis role="bold">No</emphasis>
           then Shorewall won't clear the current traffic control rules during
-          [re]start. This setting is intended for use by people who prefer to
-          configure traffic shaping when the network interfaces come up rather
-          than when the firewall is started. If that is what you want to do,
-          set TC_ENABLED=Yes and CLEAR_TC=No and do not supply an
-          /etc/shorewall/tcstart file. That way, your traffic shaping rules
-          can still use the “fwmark” classifier based on packet marking
-          defined in <ulink
+          [<command>re</command>]<command>start</command> or
+          <command>reload</command>. This setting is intended for use by
+          people who prefer to configure traffic shaping when the network
+          interfaces come up rather than when the firewall is started. If that
+          is what you want to do, set TC_ENABLED=Yes and CLEAR_TC=No and do
+          not supply an /etc/shorewall/tcstart file. That way, your traffic
+          shaping rules can still use the “fwmark” classifier based on packet
+          marking defined in <ulink
           url="/manpages/shorewall-tcrules.html">shorewall-tcrules</ulink>(5).
           If not specified, CLEAR_TC=Yes is assumed.</para>
         </listitem>
@@ -677,8 +681,8 @@
 
         <listitem>
           <para>If set to Yes (the default value), entries in the
-          /etc/shorewall/route_stopped files cause an 'ip rule del' command to
-          be generated in addition to an 'ip rule add' command. Setting this
+          /etc/shorewall/rtrules files cause an 'ip rule del' command to be
+          generated in addition to an 'ip rule add' command. Setting this
           option to No, causes the 'ip rule del' command to be omitted.</para>
         </listitem>
       </varlistentry>
@@ -733,6 +737,23 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">DOCKER=</emphasis>[<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.6. When set to <option>Yes</option>,
+          the generated script will save Docker-generated rules before and
+          restore them after executing the <command>start</command>,
+          <command>stop</command>, <command>reload</command> and
+          <command>restart</command> commands. If set to <option>No</option>
+          (the default), the generated script will delete any Docker-generated
+          rules when executing those commands. See<ulink url="/Docker.html">
+          http://www.shorewall.net/Docker.html</ulink> for additional
+          information.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis
         role="bold">DONT_LOAD=</emphasis>[<emphasis>module</emphasis>[,<emphasis>module</emphasis>]...]</term>
@@ -744,15 +765,87 @@
 
       <varlistentry>
         <term><emphasis role="bold">DYNAMIC_BLACKLIST=</emphasis>{<emphasis
-        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>
+        role="bold">Yes</emphasis>|<emphasis
+        role="bold">No</emphasis>||<emphasis
+        role="bold">ipset</emphasis>[<emphasis
+        role="bold">-only</emphasis>][<replaceable>,option</replaceable>[,...]][:[<replaceable>setname</replaceable>][:<replaceable>log_level</replaceable>|:l<replaceable>og_tag</replaceable>]]]}</term>
 
         <listitem>
           <para>Added in Shorewall 4.4.7. When set to <emphasis
           role="bold">No</emphasis> or <emphasis role="bold">no</emphasis>,
-          dynamic blacklisting using the <command>shorewall drop</command>,
-          <command>shorewall reject</command>, <command>shorewall
-          logdrop</command> and <command>shorewall logreject</command> is
-          disabled. Default is <emphasis role="bold">Yes</emphasis>.</para>
+          chain-based dynamic blacklisting using <command>shorewall
+          drop</command>, <command>shorewall reject</command>,
+          <command>shorewall logdrop</command> and <command>shorewall
+          logreject</command> is disabled. Default is <emphasis
+          role="bold">Yes</emphasis>. Beginning with Shorewall 5.0.8,
+          ipset-based dynamic blacklisting using the <command>shorewall
+          blacklist</command> command is also supported. The name of the set
+          (<replaceable>setname</replaceable>) and the level
+          (<replaceable>log_level</replaceable>), if any, at which blacklisted
+          traffic is to be logged may also be specified. The default set name
+          is SW_DBL4 and the default log level is <option>none</option> (no
+          logging). If <option>ipset-only</option> is given, then chain-based
+          dynamic blacklisting is disabled just as if DYNAMIC_BLACKLISTING=No
+          had been specified.</para>
+
+          <para>Possible <replaceable>option</replaceable>s are:</para>
+
+          <variablelist>
+            <varlistentry>
+              <term>src-dst</term>
+
+              <listitem>
+                <para>Normally, only packets whose source address matches an
+                entry in the ipset are dropped. If <option>src-dst</option> is
+                included, then packets whose destination address matches an
+                entry in the ipset are also dropped. </para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><option>disconnect</option></term>
+
+              <listitem>
+                <para>The <option>disconnect</option> option was added in
+                Shorewall 5.0.13 and requires that the conntrack utility be
+                installed on the firewall system. When an address is
+                blacklisted using the <command>blacklist</command> command,
+                all connections originating from that address are
+                disconnected. if the <option>src-dst</option> option was also
+                specified, then all connections to that address are also
+                disconnected.</para>
+              </listitem>
+            </varlistentry>
+
+            <varlistentry>
+              <term><option>timeout</option>=<replaceable>seconds</replaceable></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.13. Normally, Shorewall creates
+                the dynamic blacklisting ipset with timeout 0 which means that
+                entries are permanent. If you want entries in the set that are
+                not accessed for a period of time to be deleted from the set,
+                you may specify that period using this option. Note that the
+                <command>blacklist</command> command can override the ipset's
+                timeout setting.</para>
+
+                <important>
+                  <para>Once the dynamic blacklisting ipset has been created,
+                  changing this option setting requires a complete restart of
+                  the firewall; <command>shorewall restart</command> if
+                  RESTART=restart, otherwise <command>shorewall stop
+                  &amp;&amp; shorewall start</command></para>
+                </important>
+              </listitem>
+            </varlistentry>
+          </variablelist>
+
+          <para>When ipset-based dynamic blacklisting is enabled, the contents
+          of the blacklist will be preserved over
+          <command>stop</command>/<command>reboot</command>/<command>start</command>
+          sequences if SAVE_IPSETS=Yes, SAVE_IPSETS=ipv4 or if
+          <replaceable>setname</replaceable> is included in the list of sets
+          to be saved in SAVE_IPSETS.</para>
         </listitem>
       </varlistentry>
 
@@ -763,8 +856,8 @@
         <listitem>
           <para>Normally, when the SOURCE or DEST columns in
           shorewall-policy(5) contains 'all', a single policy chain is created
-          and the policy is enforced in that chain. For example, if the policy
-          entry is<programlisting>#SOURCE DEST POLICY LOG
+          and thes policy is enforced in that chain. For example, if the
+          policy entry is<programlisting>#SOURCE DEST POLICY LOG
 #                   LEVEL
 net     all  DROP   info</programlisting>then the chain name is 'net-all'
           ('net2all if ZONE2ZONE=2) which is also the chain named in Shorewall
@@ -789,7 +882,7 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
           helpers file from the administrative system into the script. When
           set to No or not specified, the compiler will not copy the modules
           or helpers file from <filename>/usr/share/shorewall</filename> but
-          will copy the found in another location on the CONFIG_PATH.</para>
+          will copy those found in another location on the CONFIG_PATH.</para>
 
           <para>When compiling for direct use by Shorewall, causes the
           contents of the local module or helpers file to be copied into the
@@ -807,7 +900,8 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
           packets until these packets reach the chain in which the original
           connection was accepted. So for packets going from the 'loc' zone to
           the 'net' zone, ESTABLISHED/RELATED packets are ACCEPTED in the
-          'loc2net' chain.</para>
+          'loc-net' or 'loc2net' chain, depending on the setting of ZONE2ZONE
+          (see below).</para>
 
           <para>If you set FASTACCEPT=Yes, then ESTABLISHED/RELATED packets
           are accepted early in the INPUT, FORWARD and OUTPUT chains. If you
@@ -817,12 +911,26 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis
+        role="bold">FIREWALL</emphasis>=[<emphasis>dnsname-or-ip-address</emphasis>]</term>
+
+        <listitem>
+          <para>This option was added in Shorewall 5.0.13 and may be used on
+          an administrative system in directories containing the
+          configurations of remote firewalls. The contents of the variable are
+          the default value for the <replaceable>system</replaceable>
+          parameter to the <command>remote-reload</command> and
+          <command>remote-restart</command> commands.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">FORWARD_CLEAR_MARK=</emphasis>{<emphasis
         role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>
 
         <listitem>
-          <para>Added in Shorewall 4.4.11 Beta 3. Traditionally, Shorewall has
+          <para>Added in Shorewall 4.4.11. Traditionally, Shorewall has
           cleared the packet mark in the first rule in the mangle FORWARD
           chain. This behavior is maintained with the default setting of this
           option (FORWARD_CLEAR_MARK=Yes). If FORWARD_CLEAR_MARK is set to
@@ -981,7 +1089,7 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
           iptables text in a rule. You may simply preface that text with a
           pair of semicolons (";;"). If alternate input is also specified in
           the rule, it should appear before the semicolons and may be
-          seperated from normal column input by a single semicolon.</para>
+          separated from normal column input by a single semicolon.</para>
         </listitem>
       </varlistentry>
 
@@ -1313,7 +1421,7 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
 
       <varlistentry>
         <term><emphasis
-        role="bold">LOGFILE=</emphasis>[<emphasis>pathname</emphasis>]</term>
+        role="bold">LOGFILE=</emphasis>[<emphasis>pathname</emphasis>|<option>systemd</option>]</term>
 
         <listitem>
           <para>This parameter tells the /sbin/shorewall program where to look
@@ -1323,7 +1431,10 @@ net     all  DROP   info</programlisting>then the chain name is 'net-all'
           log</emphasis>, and <emphasis role="bold">hits</emphasis> commands.
           If not assigned or if assigned an empty value, /var/log/messages is
           assumed. For further information, see <ulink
-          url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
+          url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.
+          Beginning with Shorewall 5.0.10.1, you may specify
+          <option>systemd</option> to use <command>journelctl -r</command> to
+          read the log.</para>
         </listitem>
       </varlistentry>
 
@@ -1531,6 +1642,18 @@ LOG:info:,bar                        net                    fw</programlisting>
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">MINIUPNPD=</emphasis>[<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8. If set to Yes, Shorewall will create
+          a chain in the nat table named MINIUPNPD-POSTROUTING and will add
+          jumps from POSTROUTING to that chain for each interface with the
+          <option>upnpd</option> option specified. Default is No.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis
         role="bold">MARK_IN_FORWARD_CHAIN=</emphasis>[<emphasis
@@ -1619,7 +1742,7 @@ LOG:info:,bar                        net                    fw</programlisting>
 
       <varlistentry>
         <term><emphasis
-        role="bold">MODULESDIR=</emphasis>[<emphasis>pathname</emphasis>[<emphasis
+        role="bold">MODULESDIR=</emphasis>[[+]<emphasis>pathname</emphasis>[<emphasis
         role="bold">:</emphasis><emphasis>pathname</emphasis>]...]</term>
 
         <listitem>
@@ -1630,6 +1753,10 @@ LOG:info:,bar                        net                    fw</programlisting>
           where <emphasis role="bold">uname</emphasis> holds the output of
           '<command>uname -r</command>' and <emphasis
           role="bold">g_family</emphasis> holds '4'.</para>
+
+          <para>The option plus sign ('+') was added in Shorewall 5.0.3 and
+          causes the listed pathnames to be appended to the default list
+          above.</para>
         </listitem>
       </varlistentry>
 
@@ -1935,6 +2062,22 @@ LOG:info:,bar                        net                    fw</programlisting>
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis
+        role="bold">PAGER=</emphasis><emphasis>pathname</emphasis></term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.6. Specifies a path name of a pager
+          program like <command>less</command> or <command>more</command>.
+          When PAGER is given, the output of verbose <command>status</command>
+          commands and the <command>dump</command> command are piped through
+          the named program when the output file is a terminal.</para>
+
+          <para>Beginning with Shorewall 5.0.12, the default value of this
+          option is the DEFAULT_PAGER setting in shorewallrc.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis
         role="bold">PATH=</emphasis><emphasis>pathname</emphasis>[<emphasis
@@ -2121,18 +2264,18 @@ LOG:info:,bar                        net                    fw</programlisting>
 #TARGET         SOURCE  DEST    PROTO
 Broadcast(DROP) -       -       -
 DROP            -       -       2
-INLINE          -       -       6       ; -j REJECT --reject-with tcp-reset
+INLINE          -       -       6       ;; -j REJECT --reject-with tcp-reset
 ?if __ENHANCED_REJECT
-INLINE          -       -       17      ; -j REJECT
+INLINE          -       -       17      ;; -j REJECT
 ?if __IPV4
-INLINE          -       -       1       ; -j REJECT --reject-with icmp-host-unreachable
-INLINE          -       -       -       ; -j REJECT --reject-with icmp-host-prohibited
+INLINE          -       -       1       ;; -j REJECT --reject-with icmp-host-unreachable
+INLINE          -       -       -       ;; -j REJECT --reject-with icmp-host-prohibited
 ?else
-INLINE          -       -       58      ; -j REJECT --reject-with icmp6-addr-unreachable
-INLINE          -       -       -       ; -j REJECT --reject-with icmp6-adm-prohibited
+INLINE          -       -       58      ;; -j REJECT --reject-with icmp6-addr-unreachable
+INLINE          -       -       -       ;; -j REJECT --reject-with icmp6-adm-prohibited
 ?endif
 ?else
-INLINE          -       -       -       ; -j REJECT
+INLINE          -       -       -       ;; -j REJECT
 ?endif</programlisting>
         </listitem>
       </varlistentry>
@@ -2202,7 +2345,7 @@ INLINE          -       -       -       ; -j REJECT
           restored unconditionally at the top of the mangle OUTPUT and
           PREROUTING chains, even if the saved mark is zero. When this option
           is set to <emphasis role="bold">No</emphasis>, the mark is restored
-          even when it is zero. If you have problems with IPSEC ESP packets
+          only if it is non-zero. If you have problems with IPSEC ESP packets
           not being routed correctly on output, try setting this option to
           <emphasis role="bold">No</emphasis>.</para>
         </listitem>
@@ -2378,10 +2521,9 @@ INLINE          -       -       -       ; -j REJECT
 
         <listitem>
           <para>This option is used to specify the shell program to be used to
-          run the Shorewall compiler and to interpret the compiled script. If
-          not specified or specified as a null value, /bin/sh is assumed.
-          Using a light-weight shell such as ash or dash can significantly
-          improve performance.</para>
+          interpret the compiled script. If not specified or specified as a
+          null value, /bin/sh is assumed. Using a light-weight shell such as
+          ash or dash can significantly improve performance.</para>
         </listitem>
       </varlistentry>
 
@@ -2434,8 +2576,10 @@ INLINE          -       -       -       ; -j REJECT
           <para>If specified, determines where Shorewall will log the details
           of each <emphasis role="bold">start</emphasis>, <emphasis
           role="bold">reload</emphasis>, <emphasis
-          role="bold">restart</emphasis> and <emphasis
-          role="bold">refresh</emphasis> command. Logging verbosity is
+          role="bold">restart</emphasis>, <emphasis
+          role="bold">refresh</emphasis>, <emphasis
+          role="bold">try</emphasis>, and <emphasis
+          role="bold">safe-</emphasis>* command. Logging verbosity is
           determined by the setting of LOG_VERBOSITY above.</para>
         </listitem>
       </varlistentry>
@@ -2735,6 +2879,12 @@ INLINE          -       -       -       ; -j REJECT
           it was set to the empty string then USE_DEFAULT_RT=No was assumed.
           Beginning with Shorewall 4.6.0, the default is USE_DEFAULT_RT=Yes
           and use of USE_DEFAULT_RT=No is deprecated.</para>
+
+          <warning>
+            <para>The <command>enable</command>, <command>disable</command>
+            and <command>reenable</command> commands do not work correctly
+            when USE_DEFAULT_RT=No.</para>
+          </warning>
         </listitem>
       </varlistentry>
 
@@ -2786,6 +2936,20 @@ INLINE          -       -       -       ; -j REJECT
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">VERBOSE_MESSAGES=</emphasis>[<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.9. When Yes (the default), messages
+          produced by the ?INFO and ?WARNING directives include the filename
+          and linenumber of the directive. When set to No, that additional
+          information is omitted. The setting may be overridden on a directive
+          by directive basis by following ?INFO or ?WARNING with '!' (no
+          intervening white space).</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis
         role="bold">VERBOSITY=</emphasis>[<emphasis>number</emphasis>]</term>
@@ -2846,6 +3010,23 @@ INLINE          -       -       -       ; -j REJECT
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">ZERO_MARKS=</emphasis>[<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.12, this is a workaround for an issue
+          where packet marks are not zeroed by the kernel. It should be set to
+          No (the default) unless you find that incoming packets are being
+          mis-routed for no apparent reasons.</para>
+
+          <caution>
+            <para>Do not set this option to Yes if you have IPSEC software
+            running on the firewall system.</para>
+          </caution>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis
         role="bold">ZONE_BITS</emphasis>=[<replaceable>number</replaceable>]</term>

Shorewall/manpages/shorewall.xml

@@ -49,6 +49,21 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>blacklist</option></arg>
+
+      <arg
+      choice="plain"><replaceable>address</replaceable><arg><replaceable>option</replaceable>
+      ...</arg></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall</command>
 
@@ -436,9 +451,9 @@
 
       <arg><option>-i</option></arg>
 
-      <arg><replaceable>directory</replaceable></arg>
+      <arg><arg><option>-D</option></arg><replaceable>directory</replaceable></arg>
 
-      <arg choice="plain"><replaceable>system</replaceable></arg>
+      <arg choice="plain"><arg><replaceable>system</replaceable></arg></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -460,9 +475,9 @@
 
       <arg><option>-i</option></arg>
 
-      <arg><replaceable>directory</replaceable></arg>
+      <arg><arg><option>-D</option></arg><replaceable>directory</replaceable></arg>
 
-      <arg choice="plain"><replaceable>system</replaceable></arg>
+      <arg choice="plain"><arg><replaceable>system</replaceable></arg></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -484,9 +499,9 @@
 
       <arg><option>-i</option></arg>
 
-      <arg><replaceable>directory</replaceable></arg>
+      <arg><arg><option>-D</option></arg><replaceable>directory</replaceable></arg>
 
-      <arg choice="plain"><replaceable>system</replaceable></arg>
+      <arg choice="plain"><arg><replaceable>system</replaceable></arg></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -951,7 +966,45 @@
           blacklisted by a <emphasis role="bold">drop</emphasis>, <emphasis
           role="bold">logdrop</emphasis>, <emphasis
           role="bold">reject</emphasis>, or <emphasis
-          role="bold">logreject</emphasis> command.</para>
+          role="bold">logreject</emphasis> command. Beginning with Shorewall
+          5.0.10, this command can also re-enable addresses blacklisted using
+          the <command>blacklist</command> command.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">blacklist</emphasis>
+        <replaceable>address</replaceable> [ <replaceable>option</replaceable>
+        ... ]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8 and requires
+          DYNAMIC_BLACKLIST=ipset.. in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).
+          Causes packets from the given host or network
+          <replaceable>address</replaceable> to be dropped, based on the
+          setting of BLACKLIST in <ulink
+          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). The
+          <replaceable>address</replaceable> along with any
+          <replaceable>option</replaceable>s are passed to the <command>ipset
+          add</command> command.</para>
+
+          <para>If the <option>disconnect</option> option is specified in the
+          DYNAMIC_BLACKLISTING setting, then the effective VERBOSITY
+          determines the amount of information displayed:</para>
+
+          <itemizedlist>
+            <listitem>
+              <para>If the effective verbosity is &gt; 0, then a message
+              giving the number of conntrack flows deleted by the command is
+              displayed.</para>
+            </listitem>
+
+            <listitem>
+              <para>If the effective verbosity is &gt; 1, then the conntrack
+              table entries deleted by the command are also displayed.</para>
+            </listitem>
+          </itemizedlist>
         </listitem>
       </varlistentry>
 
@@ -1578,8 +1631,8 @@
         <term><emphasis role="bold">remote-start</emphasis>
         [-<option>s</option>] [-<option>c</option>] [-<option>r</option>
         <replaceable>root-user-name</replaceable>] [-<option>T</option>]
-        [-<option>i</option>] [ <replaceable>directory</replaceable> ]
-        <replaceable>system</replaceable></term>
+        [-<option>i</option>] [ [ -D ] <replaceable>directory</replaceable> ]
+        [ <replaceable>system</replaceable> ]</term>
 
         <listitem>
           <para>This command was renamed from <command>load</command> in
@@ -1605,7 +1658,13 @@
           directory. If compilation succeeds, then firewall is copied to
           <replaceable>system</replaceable> using scp. If the copy succeeds,
           Shorewall Lite on <replaceable>system</replaceable> is started via
-          ssh.</para>
+          ssh. Beginning with Shorewall 5.0.13, if
+          <replaceable>system</replaceable> is omitted, then the FIREWALL
+          option setting in <ulink
+          url="shorewall6.conf.html">shorewall6.conf(5)</ulink> is assumed. In
+          that case, if you want to specify a
+          <replaceable>directory</replaceable>, then the <option>-D</option>
+          option must be given.</para>
 
           <para>If <emphasis role="bold">-s</emphasis> is specified and the
           <emphasis role="bold">start</emphasis> command succeeds, then the
@@ -1640,9 +1699,9 @@
         <term><emphasis role="bold">remote-reload
         </emphasis>[-<option>s</option>] [-<option>c</option>]
         [-<option>r</option> <replaceable>root-user-name</replaceable>]
-        [-<option>T</option>] [-<option>i</option>] [
-        <replaceable>directory</replaceable> ]
-        <replaceable>system</replaceable></term>
+        [-<option>T</option>] [-<option>i</option>] [ [ -D ]
+        <replaceable>directory</replaceable> ] [
+        <replaceable>system</replaceable> ]</term>
 
         <listitem>
           <para>This command was added in Shorewall 5.0.0.</para>
@@ -1666,8 +1725,14 @@
           defaulted) directory is compiled to a file called firewall in that
           directory. If compilation succeeds, then firewall is copied to
           <emphasis>system</emphasis> using scp. If the copy succeeds,
-          Shorewall Lite on <emphasis>system</emphasis> is restarted via
-          ssh.</para>
+          Shorewall Lite on <emphasis>system</emphasis> is restarted via ssh.
+          Beginning with Shorewall 5.0.13, if
+          <replaceable>system</replaceable> is omitted, then the FIREWALL
+          option setting in <ulink
+          url="shorewall6.conf.html">shorewall6.conf(5)</ulink> is assumed. In
+          that case, if you want to specify a
+          <replaceable>directory</replaceable>, then the <option>-D</option>
+          option must be given.</para>
 
           <para>If <emphasis role="bold">-s</emphasis> is specified and the
           <emphasis role="bold">restart</emphasis> command succeeds, then the
@@ -1702,9 +1767,9 @@
         <term><emphasis role="bold">remote-restart
         </emphasis>[-<option>s</option>] [-<option>c</option>]
         [-<option>r</option> <replaceable>root-user-name</replaceable>]
-        [-<option>T</option>] [-<option>i</option>] [
-        <replaceable>directory</replaceable> ]
-        <replaceable>system</replaceable></term>
+        [-<option>T</option>] [-<option>i</option>] [ [ -D ]
+        <replaceable>directory</replaceable> ] [
+        <replaceable>system</replaceable> ]</term>
 
         <listitem>
           <para>This command was renamed from <command>reload</command> in
@@ -1729,8 +1794,14 @@
           defaulted) directory is compiled to a file called firewall in that
           directory. If compilation succeeds, then firewall is copied to
           <emphasis>system</emphasis> using scp. If the copy succeeds,
-          Shorewall Lite on <emphasis>system</emphasis> is restarted via
-          ssh.</para>
+          Shorewall Lite on <emphasis>system</emphasis> is restarted via ssh.
+          Beginning with Shorewall 5.0.13, if
+          <replaceable>system</replaceable> is omitted, then the FIREWALL
+          option setting in <ulink
+          url="shorewall6.conf.html">shorewall6.conf(5)</ulink> is assumed. In
+          that case, if you want to specify a
+          <replaceable>directory</replaceable>, then the <option>-D</option>
+          option must be given.</para>
 
           <para>If <emphasis role="bold">-s</emphasis> is specified and the
           <emphasis role="bold">restart</emphasis> command succeeds, then the
@@ -2593,6 +2664,34 @@
     started.</para>
   </refsect1>
 
+  <refsect1>
+    <title>ENVIRONMENT</title>
+
+    <para>Two environmental variables are recognized by Shorewall:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term>SHOREWALL_INIT_SCRIPT</term>
+
+        <listitem>
+          <para>When set to 1, causes Std out to be redirected to the file
+          specified in the STARTUP_LOG option in <ulink
+          url="shorewall.conf.html">shorewall.conf(5)</ulink>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>SW_LOGGERTAG</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8. When set to a non-empty value, that
+          value is passed to the logger utility in its -t (--tag)
+          option.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
   <refsect1>
     <title>FILES</title>
 

Shorewall/modules.essential

@@ -1,16 +1,16 @@
 #
-# Shorewall version 5 - Essential Modules File
+# Shorewall -- /usr/share/shorewall/modules.essential
 #
-# /usr/share/shorewall/modules.essential
+# Essential Modules File
 #
-#	This file loads the modules that may be needed by the firewall.
+# This file loads the modules that may be needed by the firewall.
 #
-#	THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
-#	dependency order. i.e., if M2 depends on M1 then you must load M1
-#	before you load M2.
+# THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
+# dependency order. i.e., if M2 depends on M1 then you must load M1
+# before you load M2.
 #
-#  If you need to modify this file, copy it to /etc/shorewall and modify the
-#  copy.
+# If you need to modify this file, copy it to /etc/shorewall and modify the
+# copy.
 #
 ###############################################################################
 #

Shorewall/modules.extensions

@@ -1,16 +1,16 @@
 #
-# Shorewall version 5 - Extensions Modules File
+# Shorewall -- /usr/share/shorewall/modules.extensions
 #
-# /usr/share/shorewall/modules.extensions
+# Extensions Modules File
 #
-#	This file loads the modules that may be needed by the firewall.
+# This file loads the modules that may be needed by the firewall.
 #
-#	THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
-#	dependency order. i.e., if M2 depends on M1 then you must load M1
-#	before you load M2.
+# THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
+# dependency order. i.e., if M2 depends on M1 then you must load M1
+# before you load M2.
 #
-#  If you need to modify this file, copy it to /etc/shorewall and modify the
-#  copy.
+# If you need to modify this file, copy it to /etc/shorewall and modify the
+# copy.
 #
 ###############################################################################
 loadmodule ipt_addrtype

Shorewall/modules.ipset

@@ -1,16 +1,16 @@
 #
-# Shorewall version 5 - IP Set Modules File
+# Shorewall -- /usr/share/shorewall/modules.ipset
 #
-# /usr/share/shorewall/modules.ipset
+# IP Set Modules File
 #
-#	This file loads the modules that may be needed by the firewall.
+# This file loads the modules that may be needed by the firewall.
 #
-#	THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
-#	dependency order. i.e., if M2 depends on M1 then you must load M1
-#	before you load M2.
+# THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
+# dependency order. i.e., if M2 depends on M1 then you must load M1
+# before you load M2.
 #
-#  If you need to modify this file, copy it to /etc/shorewall and modify the
-#  copy.
+# If you need to modify this file, copy it to /etc/shorewall and modify the
+# copy.
 #
 ###############################################################################
 loadmodule xt_set

Shorewall/modules.tc

@@ -1,16 +1,16 @@
 #
-# Shorewall version 5 - Traffic Shaping Modules File
+# Shorewall -- /usr/share/shorewall/modules.tc
 #
-# /usr/share/shorewall/modules.tc
+# Traffic Shaping Modules File
 #
-#	This file loads the modules that may be needed by the firewall.
+# This file loads the modules that may be needed by the firewall.
 #
-#	THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
-#	dependency order. i.e., if M2 depends on M1 then you must load M1
-#	before you load M2.
+# THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
+# dependency order. i.e., if M2 depends on M1 then you must load M1
+# before you load M2.
 #
-#  If you need to modify this file, copy it to /etc/shorewall and modify the
-#  copy.
+# If you need to modify this file, copy it to /etc/shorewall and modify the
+# copy.
 #
 ###############################################################################
 loadmodule sch_sfq

Shorewall/modules.xtables

@@ -1,16 +1,16 @@
 #
-# Shorewall version 5 - Xtables Modules File
+# Shorewall -- /usr/share/shorewall/modules.xtables
 #
-# /usr/share/shorewall/modules.xtables
+# Xtables Modules File
 #
-#	This file loads the modules that may be needed by the firewall.
+# This file loads the modules that may be needed by the firewall.
 #
-#	THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
-#	dependency order. i.e., if M2 depends on M1 then you must load M1
-#	before you load M2.
+# THE ORDER OF THE COMMANDS BELOW IS IMPORTANT!!!!!! You MUST load in
+# dependency order. i.e., if M2 depends on M1 then you must load M1
+# before you load M2.
 #
-#  If you need to modify this file, copy it to /etc/shorewall and modify the
-#  copy.
+# If you need to modify this file, copy it to /etc/shorewall and modify the
+# copy.
 #
 ###############################################################################
 loadmodule xt_AUDIT

Shorewall/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://www.shorewall.net
 #
@@ -215,7 +215,7 @@ rm -rf ${SHAREDIR}/shorewall/configfiles/
 rm -rf ${SHAREDIR}/shorewall/Samples/
 rm -rf ${SHAREDIR}/shorewall/Shorewall/
 rm -f  ${SHAREDIR}/shorewall/lib.cli-std
-rm -f  ${SHAREDIR}/shorewall/lib.core
+rm -f  ${SHAREDIR}/shorewall/lib.runtime
 rm -f  ${SHAREDIR}/shorewall/compiler.pl
 rm -f  ${SHAREDIR}/shorewall/prog.*
 rm -f  ${SHAREDIR}/shorewall/module*

Shorewall6-lite/README.txt

@@ -1 +0,0 @@
-This is the Shorewall6-lite stable 4.4 branch of Git.

Shorewall6-lite/init.debian.sh

@@ -5,7 +5,7 @@
 # Required-Start:    $network $remote_fs
 # Required-Stop:     $network $remote_fs
 # Default-Start:     S
-# Default-Stop:      0 6
+# Default-Stop:      0 1 6
 # Short-Description: Configure the firewall at boot time
 # Description:       Configure the firewall according to the rules specified in
 #                    /etc/shorewall6-lite
@@ -92,10 +92,11 @@ shorewall6_start () {
 
 # stop the firewall
 shorewall6_stop () {
-  echo -n "Stopping \"Shorewall6 Lite firewall\": "
   if [ "$SAFESTOP" = 1 ]; then
+      echo -n "Stopping \"Shorewall6 Lite firewall\": "
       $SRWL $SRWL_OPTS stop >> $INITLOG 2>&1 && echo "done." || echo_notdone
   else
+      echo -n "Clearing all \"Shorewall6 Lite firewall\" rules: "
       $SRWL $SRWL_OPTS clear >> $INITLOG 2>&1 && echo "done." || echo_notdone
   fi
   return 0

Shorewall6-lite/manpages/shorewall6-lite.xml

@@ -47,6 +47,19 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall6-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>blacklist</option></arg>
+
+      <arg choice="plain"><replaceable>address</replaceable></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall6-lite</command>
 
@@ -666,7 +679,45 @@
           <para>Re-enables receipt of packets from hosts previously
           blacklisted by a <command>drop</command>,
           <command>logdrop</command>, <command>reject</command>, or
-          <command>logreject</command> command.</para>
+          <command>logreject</command> command. Beginning with Shorewall
+          5.0.10, this command can also re-enable addresses blacklisted using
+          the <command>blacklist</command> command.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">blacklist</emphasis>
+        <replaceable>address</replaceable> [ <replaceable>option</replaceable>
+        ... ]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8 and requires
+          DYNAMIC_BLACKLIST=ipset.. in <ulink
+          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5).
+          Causes packets from the given host or network
+          <replaceable>address</replaceable> to be dropped, based on the
+          setting of BLACKLIST in <ulink
+          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5).
+          The <replaceable>address</replaceable> along with any
+          <replaceable>option</replaceable>s are passed to the <command>ipset
+          add</command> command.</para>
+
+          <para>If the <option>disconnect</option> option is specified in the
+          DYNAMIC_BLACKLISTING setting, then the effective VERBOSITY
+          determines the amount of information displayed:</para>
+
+          <itemizedlist>
+            <listitem>
+              <para>If the effective verbosity is &gt; 0, then a message
+              giving the number of conntrack flows deleted by the command is
+              displayed.</para>
+            </listitem>
+
+            <listitem>
+              <para>If the effective verbosity is &gt; 1, then the conntrack
+              table entries deleted by the command are also displayed.</para>
+            </listitem>
+          </itemizedlist>
         </listitem>
       </varlistentry>
 
@@ -1515,6 +1566,35 @@
     started.</para>
   </refsect1>
 
+  <refsect1>
+    <title>ENVIRONMENT</title>
+
+    <para>Two environmental variables are recognized by
+    Shorewall6-lite:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term>SHOREWALL_INIT_SCRIPT</term>
+
+        <listitem>
+          <para>When set to 1, causes Std out to be redirected to the file
+          specified in the STARTUP_LOG option in <ulink
+          url="shorewall6.conf.html">shorewall6.conf(5)</ulink>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>SW_LOGGERTAG</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.8. When set to a non-empty value, that
+          value is passed to the logger utility in its -t (--tag)
+          option.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
   <refsect1>
     <title>See ALSO</title>