Remove debugging code from Shorewall-init installer

Signed-off-by: Tom Eastep <teastep@shorewall.net>
Load xt_LOG in both helpers files
2014-10-19 08:16:02 -07:00 · 2014-10-19 07:44:01 -07:00 · 2014-10-18 08:01:51 -07:00 · 2014-10-17 08:05:47 -07:00 · 2014-10-16 07:45:20 -07:00 · 2014-10-16 07:44:09 -07:00
535 changed files with 15261 additions and 16812 deletions
--- a/Shorewall-core/INSTALL
+++ b/Shorewall-core/INSTALL
@@ -1,4 +1,4 @@
-Shoreline Firewall (Shorewall) Version 5
+Shoreline Firewall (Shorewall) Version 4
 -----         ----

 -----------------------------------------------------------------------------
--- a/Shorewall-core/configure
+++ b/Shorewall-core/configure
@@ -28,7 +28,7 @@
 #
 # Build updates this
 #
-VERSION=4.6.12
+VERSION=4.5.2.1

 case "$BASH_VERSION" in
    [4-9].*)
@@ -91,8 +91,6 @@ for p in $@; do
    fi
 done

-cd $(dirname $0)
-
 vendor=${params[HOST]}

 if [ -z "$vendor" ]; then
@@ -124,6 +122,7 @@ if [ -z "$vendor" ]; then
 	    params[HOST]=apple
 	    rcfile=shorewallrc.apple
 	    ;;
+
 	cygwin*|CYGWIN*)
 	    params[HOST]=cygwin
 	    rcfile=shorewallrc.cygwin
@@ -131,7 +130,7 @@ if [ -z "$vendor" ]; then
 	*)
 	    if [ -f /etc/debian_version ]; then
 		params[HOST]=debian
-		ls -l /sbin/init | fgrep -q systemd &&  rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
+		rcfile=shorewallrc.debian
 	    elif [ -f /etc/redhat-release ]; then
 		params[HOST]=redhat
 		rcfile=shorewallrc.redhat
@@ -144,41 +143,28 @@ if [ -z "$vendor" ]; then
 	    elif [ -f /etc/arch-release ] ; then
 		params[HOST]=archlinux
 		rcfile=shorewallrc.archlinux
-	    elif [ -f /etc/openwrt_release ]; then
-		params[HOST]=openwrt
-		rcfile=shorewallrc.openwrt
 	    else
 		params[HOST]=linux
 		rcfile=shorewallrc.default
 	    fi
 	    ;;
    esac
-    vendor=${params[HOST]}
-else
-    if [ $vendor = linux ]; then
-	rcfile=shorewallrc.default;
-    elif [ $vendor = debian -a -f /etc/debian_version ]; then
-	ls -l /sbin/init | fgrep -q systemd && rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
-    else
-	rcfile=shorewallrc.$vendor
-    fi

+    vendor=${params[HOST]}
+elif [ $vendor = linux ]; then
+    rcfile=shorewallrc.default;
+else
+    rcfile=shorewallrc.$vendor
    if [ ! -f $rcfile ]; then
 	echo "ERROR: $vendor is not a recognized host type" >&2
 	exit 1
-    elif [ $vendor = default ]; then
-	params[HOST]=linux
-	vendor=linux
-    elif [[ $vendor == debian.* ]]; then
-	params[HOST]=debian
-	vendor=debian
    fi
 fi

 if [ $vendor = linux ]; then
    echo "INFO: Creating a generic Linux installation - " `date`;
 else
-    echo "INFO: Creating a ${params[HOST]}-specific installation - " `date`;
+    echo "INFO: Creating a ${vendor}-specific installation - " `date`;
 fi

 echo
@@ -191,7 +177,6 @@ done

 echo '#'                                                                 > shorewallrc
 echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
-echo "# rc file: $rcfile"                                               >> shorewallrc
 echo '#'                                                                >> shorewallrc

 if [ $# -gt 0 ]; then
@@ -210,10 +195,6 @@ elif [ -n "${options[VARDIR]}" ]; then
    fi
 fi

-if [ -z "${options[SERVICEDIR]}" ]; then
-    options[SERVICEDIR]="${options[SYSTEMD]}"
-fi
-
 for on in \
    HOST \
    PREFIX \
@@ -228,7 +209,7 @@ for on in \
    INITFILE \
    AUXINITSOURCE \
    AUXINITFILE \
-    SERVICEDIR \
+    SYSTEMD \
    SERVICEFILE \
    SYSCONFFILE \
    SYSCONFDIR \
--- a/Shorewall-core/configure.pl
+++ b/Shorewall-core/configure.pl
@@ -31,7 +31,7 @@ use strict;
 # Build updates this
 #
 use constant {
-    VERSION => '4.6.12'
+    VERSION => '4.5.2.1'
 };

 my %params;
@@ -52,9 +52,6 @@ for ( @ARGV ) {
    $params{$pn} = $pv;
 }

-use File::Basename;
-chdir dirname($0);
-
 my $vendor = $params{HOST};
 my $rcfile;
 my $rcfilename;
@@ -71,52 +68,23 @@ unless ( defined $vendor ) {
 	    $vendor = 'redhat';
 	} elsif ( $id eq 'opensuse' ) {
 	    $vendor = 'suse';
-	} elsif ( $id eq 'ubuntu' || $id eq 'debian' ) {
-	    my $init = `ls -l /sbin/init`;
-	    $vendor = $init =~ /systemd/ ? 'debian.systemd' : 'debian.sysvinit';
+	} elsif ( $id eq 'ubuntu' ) {
+	    $vendor = 'debian';
 	} else {
 	    $vendor = $id;
 	}
    }

    $params{HOST} = $vendor;
-    $params{HOST} =~ s/\..*//;
 }

 if ( defined $vendor ) {
-    if ( $vendor eq 'debian' && -f '/etc/debian_version' ) {
-	if ( -l '/sbin/init' ) {
-	    if ( readlink('/sbin/init') =~ /systemd/ ) {
-		$rcfilename = 'shorewallrc.debian.systemd';
-	    } else {
-		$rcfilename = 'shorewallrc.debian.sysvinit';
-	    }
-	} else {
-	    $rcfilename = 'shorewallrc.debian.sysvinit';
-	}
-    } else {
-	$rcfilename = $vendor eq 'linux' ? 'shorewallrc.default' : 'shorewallrc.' . $vendor;
-    }
-
-    unless ( -f $rcfilename ) {
-	die qq("ERROR: $vendor" is not a recognized host type);
-    } elsif ( $vendor eq 'default' ) {
-	$params{HOST} = $vendor = 'linux';
-    } elsif ( $vendor =~ /^debian\./ ) {
-	$params{HOST} = $vendor = 'debian';
-    }
+    $rcfilename = $vendor eq 'linux' ? 'shorewallrc.default' : 'shorewallrc.' . $vendor;
+    die qq("ERROR: $vendor" is not a recognized host type) unless -f $rcfilename;
 } else {
    if ( -f '/etc/debian_version' ) {
 	$vendor = 'debian';
-	if ( -l '/sbin/init' ) {
-	    if ( readlink( '/sbin/init' ) =~ /systemd/ ) {
-		$rcfilename = 'shorewallrc.debian.systemd';
-	    } else {
-		$rcfilename = 'shorewallrc.debian.sysvinit';
-	    }
-	} else {
-	    $rcfilename = 'shorewallrc.debian.sysvinit';
-	}
+	$rcfilename = 'shorewallrc.debian';
    } elsif ( -f '/etc/redhat-release' ){
 	$vendor = 'redhat';
 	$rcfilename = 'shorewallrc.redhat';
@@ -149,7 +117,7 @@ my @abbr = qw( Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec );
 if ( $vendor eq 'linux' ) {
    printf "INFO: Creating a generic Linux installation - %s %2d %04d %02d:%02d:%02d\n\n", $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
 } else {
-    printf "INFO: Creating a %s-specific installation - %s %2d %04d %02d:%02d:%02d\n\n", $params{HOST}, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
+    printf "INFO: Creating a %s-specific installation - %s %2d %04d %02d:%02d:%02d\n\n", $vendor, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
 }

 open $rcfile, '<', $rcfilename or die "Unable to open $rcfilename for input: $!";
@@ -173,8 +141,7 @@ my $outfile;

 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";

-printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
-print $outfile "# rc file: $rcfilename\n#\n";
+printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n#\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];

 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;

@@ -187,8 +154,6 @@ if ( $options{VARLIB} ) {
    $options{VARDIR} = '${VARLIB}/${PRODUCT}';
 }

-$options{SERVICEDIR}=$options{SYSTEMD} unless $options{SERVICEDIR};
-
 for ( qw/ HOST
 	  PREFIX
 	  SHAREDIR
@@ -202,8 +167,8 @@ for ( qw/ HOST
 	  INITFILE
 	  AUXINITSOURCE
 	  AUXINITFILE
-	  SERVICEDIR
-	  SERVICEFILE
+	  SYSTEMD
+          SERVICEFILE
 	  SYSCONFFILE
 	  SYSCONFDIR
 	  SPARSE
--- a/Shorewall-core/install.sh
+++ b/Shorewall-core/install.sh
@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Core Modules
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -24,9 +24,6 @@

 VERSION=xxx #The Build script inserts the actual version

-PRODUCT=shorewall-core
-Product="Shorewall Core"
- 
 usage() # $1 = exit status
 {
    ME=$(basename $0)
@@ -69,6 +66,15 @@ mywhich() {
    return 2
 }

+run_install()
+{
+    if ! install $*; then
+	echo
+	echo "ERROR: Failed to install $*" >&2
+	exit 1
+    fi
+}
+
 cant_autostart()
 {
    echo
@@ -82,20 +88,7 @@ delete_file() # $1 = file to delete

 install_file() # $1 = source $2 = target $3 = mode
 {
-    if cp -f $1 $2; then
-	if chmod $3 $2; then
-	    if [ -n "$OWNER" ]; then
-		if chown $OWNER:$GROUP $2; then
-		    return
-		fi
-	    else
-		return 0
-	    fi
-	fi
-    fi
-
-    echo "ERROR: Failed to install $2" >&2
-    exit 1
+    run_install $T $OWNERSHIP -m $3 $1 ${2}
 }

 require()
@@ -103,9 +96,6 @@ require()
    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }

-#
-# Change to the directory containing this script
-#
 cd "$(dirname $0)"

 #
@@ -191,6 +181,10 @@ done

 [ "${INITFILE}" != 'none/' ] && require INITSOURCE && require INITDIR

+T="-T"
+
+INSTALLD='-D'
+
 if [ -z "$BUILD" ]; then
    case $(uname) in
 	cygwin*|CYGWIN*)
@@ -232,8 +226,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=suse
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
-	    elif [ -f ${CONFDIR}/openwrt_release ] ; then
-		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -260,15 +252,17 @@ case $BUILD in

 	[ -z "$OWNER" ] && OWNER=root
 	[ -z "$GROUP" ] && GROUP=wheel
+	INSTALLD=
+	T=
 	;;
    *)
-	if [ $(id -u) -eq 0 ]; then
-	    [ -z "$OWNER" ] && OWNER=root
-	    [ -z "$GROUP" ] && GROUP=root
-	fi
+	[ -z "$OWNER" ] && OWNER=root
+	[ -z "$GROUP" ] && GROUP=root
 	;;
 esac

+OWNERSHIP="-o $OWNER -g $GROUP"
+
 #
 # Determine where to install the firewall script
 #
@@ -282,7 +276,7 @@ case "$HOST" in
    apple)
 	echo "Installing Mac-specific configuration...";
 	;;
-    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
+    debian|gentoo|redhat|slackware|archlinux|linux|suse)
 	;;
    *)
 	echo "ERROR: Unknown HOST \"$HOST\"" >&2
@@ -311,6 +305,7 @@ if [ -n "$DESTDIR" ]; then
    if [ $BUILD != cygwin ]; then
 	if [ `id -u` != 0 ] ; then
 	    echo "Not setting file owner/group permissions, not running as root."
+	    OWNERSHIP=""
 	fi
    fi
 fi
@@ -334,22 +329,16 @@ if [ -n "${SYSCONFDIR}" ]; then
    chmod 755 ${DESTDIR}${SYSCONFDIR}
 fi

-if [ -z "${SERVICEDIR}" ]; then
-    SERVICEDIR="$SYSTEMD"
-fi
-
-if [ -n "${SERVICEDIR}" ]; then
-    mkdir -p ${DESTDIR}${SERVICEDIR}
-    chmod 755 ${DESTDIR}${SERVICEDIR}
+if [ -n "${SYSTEMD}" ]; then
+    mkdir -p ${DESTDIR}${SYSTEMD}
+    chmod 755 ${DESTDIR}${SYSTEMD}
 fi

 mkdir -p ${DESTDIR}${SBINDIR}
 chmod 755 ${DESTDIR}${SBINDIR}

-if [ -n "${MANDIR}" ]; then
-    mkdir -p ${DESTDIR}${MANDIR}
-    chmod 755 ${DESTDIR}${MANDIR}
-fi
+mkdir -p ${DESTDIR}${MANDIR}
+chmod 755 ${DESTDIR}${MANDIR}

 if [ -n "${INITFILE}" ]; then
    mkdir -p ${DESTDIR}${INITDIR}
@@ -414,9 +403,9 @@ fi
 if [ ${SHAREDIR} != /usr/share ]; then
    for f in lib.*; do
 	if [ $BUILD != apple ]; then
-	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/shorewall/$f
 	else
-	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/shorewall/$f
 	fi
    done
 fi
--- a/Shorewall-core/lib.base
+++ b/Shorewall-core/lib.base
@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.base
+# Shorewall 4.5 -- /usr/share/shorewall/lib.base
 #
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -75,24 +75,6 @@ elif [ -z "${VARDIR}" ]; then
    VARDIR="${VARLIB}/${PRODUCT}"
 fi

-#
-# Fatal Error
-#
-fatal_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 2
-}
-
-#
-# Not configured Error
-#
-not_configured_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 6
-}
-
 #
 # Conditionally produce message
 #
--- a/Shorewall-core/lib.cli
+++ b/Shorewall-core/lib.cli
--- a/Shorewall-core/lib.common
+++ b/Shorewall-core/lib.common
@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
+# Shorewall 4.5 -- /usr/share/shorewall/lib.common.
 #
-#     (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -33,7 +33,7 @@ startup_error() # $* = Error Message
    echo "   ERROR: $@: Firewall state not changed" >&2

    if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%b %d %T') "
+        timestamp="$(date +'%_b %d %T') "
        echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
    fi

@@ -50,7 +50,7 @@ startup_error() # $* = Error Message
    esac

    if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%b %d %T') "
+        timestamp="$(date +'%_b %d %T') "

 	case $COMMAND in
 	    start)
@@ -71,35 +71,98 @@ startup_error() # $* = Error Message
 }

 #
-# Create the required option string and run the passed script using
+# Get the Shorewall version of the passed script
+#
+get_script_version() { # $1 = script
+    local temp
+    local version
+    local ifs
+    local digits
+    local verbosity
+
+    verbosity="$VERBOSITY"
+    VERBOSITY=0
+
+    temp=$( $SHOREWALL_SHELL $1 version | tail -n 1 | sed 's/-.*//' )
+
+    if [ -z "$temp" ]; then
+	version=0
+    else
+	ifs=$IFS
+	IFS=.
+	temp=$(echo $temp)
+	IFS=$ifs
+	digits=0
+
+	for temp in $temp; do
+	    version=${version}$(printf '%02d' $temp)
+	    digits=$(($digits + 1))
+	    [ $digits -eq 3 ] && break
+	done
+    fi
+
+    echo $version
+
+    VERBOSITY="$verbosity"
+}
+
+#
+# Do required exports or create the required option string and run the passed script using
 # $SHOREWALL_SHELL
 #
 run_it() {
    local script
    local options
+    local version

    export VARDIR

    script=$1
    shift

-    if [ x$1 = xtrace -o x$1 = xdebug ]; then
-	options="$1 -"
-	shift;
+    version=$(get_script_version $script)
+
+    if [ $version -lt 040408 ]; then
+	#
+	# Old script that doesn't understand 4.4.8 script options
+	#
+	export RESTOREFILE
+	export VERBOSITY
+	export NOROUTES=$g_noroutes
+	export PURGE=$g_purge
+	export TIMESTAMP=$g_timestamp
+	export RECOVERING=$g_recovering
+
+	case "$g_program" in
+	    *-lite)
+		#
+		# Shorewall Lite
+		#
+		export LOGFORMAT
+		export IPTABLES
+		;;
+	esac
    else
-	options='-'
+	#
+	# 4.4.8 or later -- no additional exports required
+	#
+	if [ x$1 = xtrace -o x$1 = xdebug ]; then
+	    options="$1 -"
+	    shift;
+	else
+	    options='-'
+	fi
+
+	[ -n "$g_noroutes" ]   && options=${options}n
+	[ -n "$g_timestamp" ]  && options=${options}t
+	[ -n "$g_purge" ]      && options=${options}p
+	[ -n "$g_recovering" ] && options=${options}r
+
+	options="${options}V $VERBOSITY"
+
+	[ -n "$RESTOREFILE" ] && options="${options} -R $RESTOREFILE"
    fi

-    [ -n "$g_noroutes" ]   && options=${options}n
-    [ -n "$g_timestamp" ]  && options=${options}t
-    [ -n "$g_purge" ]      && options=${options}p
-    [ -n "$g_recovering" ] && options=${options}r
-    [ -n "$g_counters" ]   && options=${options}c
-
-    options="${options}V $VERBOSITY"
-
-    [ -n "$RESTOREFILE" ] && options="${options} -R $RESTOREFILE"
-
    $SHOREWALL_SHELL $script $options $@
 }

@@ -147,17 +210,6 @@ split() {
    IFS=$ifs
 }

-#
-# Split a comma-separated list into a space-separated list
-#
-split_list() {
-    local ifs
-    ifs=$IFS
-    IFS=,
-    echo $*
-    IFS=$ifs
-}
-
 #
 # Search a list looking for a match -- returns zero if a match found
 # 1 otherwise
@@ -316,33 +368,16 @@ reload_kernel_modules() {
    local moduleloader
    moduleloader=modprobe
    local uname
-    local extras

    if ! qt mywhich modprobe; then
 	moduleloader=insmod
    fi

-    [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
+    [ -n "${MODULE_SUFFIX:=ko ko.gz o o.gz gz}" ]

-    if [ -n "$MODULESDIR" ]; then
-	case "$MODULESDIR" in
-	    +*)
-		extras="$MODULESDIR"
-		extras=${extras#+}
-		MODULESDIR=
-		;;
-	esac
-    fi
-
-    if [ -z "$MODULESDIR" ]; then
-	uname=$(uname -r)
+    [ -z "$MODULESDIR" ] && \
+	uname=$(uname -r) && \
 	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
-	if [ -n "$extras" ]; then
-	    for directory in $(split "$extras"); do
-		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
-	    done
-	fi
-    fi

    [ -d /sys/module/ ] || MODULES=$(lsmod | cut -d ' ' -f1)

@@ -372,33 +407,16 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
    local savemoduleinfo
    savemoduleinfo=${1:-Yes} # So old compiled scripts still work
    local uname
-    local extras

    if ! qt mywhich modprobe; then
 	moduleloader=insmod
    fi

-    [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
+    [ -n "${MODULE_SUFFIX:=o gz ko o.gz ko.gz}" ]

-    if [ -n "$MODULESDIR" ]; then
-	case "$MODULESDIR" in
-	    +*)
-		extras="$MODULESDIR"
-		extras=${extras#+}
-		MODULESDIR=
-		;;
-	esac
-    fi
-
-    if [ -z "$MODULESDIR" ]; then
-	uname=$(uname -r)
+    [ -z "$MODULESDIR" ] && \
+	uname=$(uname -r) && \
 	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
-	if [ -n "$extras" ]; then
-	    for directory in $(split "$extras"); do
-		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
-	    done
-	fi
-    fi

    for directory in $(split $MODULESDIR); do
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
@@ -533,9 +551,9 @@ in_network() # $1 = IP address, $2 = CIDR network
 #
 # Query NetFilter about the existence of a filter chain
 #
-chain_exists() # $1 = chain name, $2 = table name (optional)
+chain_exists() # $1 = chain name
 {
-    qt1 $g_tool -t ${2:-filter} -L $1 -n
+    qt1 $g_tool -L $1 -n
 }

 #
@@ -626,24 +644,6 @@ find_first_interface_address_if_any() # $1 = interface
    fi
 }

-#
-#Determines if the passed interface is a loopback interface
-#
-loopback_interface() { #$1 = Interface name
-    [ "$1" = lo ] || $IP link show $1 | fgrep -q LOOPBACK
-}
-
-#
-# Find Loopback Interfaces
-#
-find_loopback_interfaces() {
-    local interfaces
-
-    [ -x "$IP" ] && interfaces=$($IP link show | fgrep LOOPBACK | sed 's/://g' | cut -d ' ' -f 2)
-
-    [ -n "$interfaces" ] && echo $interfaces || echo lo
-}
-
 #
 # Internal version of 'which'
 #
@@ -743,15 +743,12 @@ mutex_on()
    local lockf
    lockf=${LOCKFILE:=${VARDIR}/lock}
    local lockpid
-    local lockd

    MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}

    if [ $MUTEX_TIMEOUT -gt 0 ]; then

-	lockd=$(dirname $LOCKFILE)
-
-	[ -d "$lockd" ] || mkdir -p "$lockd"
+	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}

 	if [ -f $lockf ]; then
 	    lockpid=`cat ${lockf} 2> /dev/null`
@@ -771,11 +768,6 @@ mutex_on()
 	    chmod u+w ${lockf}
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
-	elif qt mywhich lock; then
-            lock -${MUTEX_TIMEOUT} -r1 ${lockf}
-            chmod u+w ${lockf}
-            echo $$ > ${lockf}
-            chmod u-w ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1
--- a/Shorewall-core/shorewallrc.apple
+++ b/Shorewall-core/shorewallrc.apple
@@ -1,5 +1,5 @@
 #
-# Apple OS X Shorewall 5.0 rc file
+# Apple OS X Shorewall 4.5 rc file
 #
 BUILD=apple
 HOST=apple
@@ -14,7 +14,7 @@ INITDIR=                               #Unused on OS X
 INITFILE=                              #Unused on OS X
 INITSOURCE=                            #Unused on OS X
 ANNOTATED=                             #Unused on OS X
-SERVICEDIR=                            #Unused on OS X
+SYSTEMD=                               #Unused on OS X
 SERVICEFILE=                           #Unused on OS X
 SYSCONFDIR=                            #Unused on OS X
 SPARSE=Yes                             #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
--- a/Shorewall-core/shorewallrc.archlinux
+++ b/Shorewall-core/shorewallrc.archlinux
@@ -1,5 +1,5 @@
 #
-# Arch Linux Shorewall 5.0 rc file
+# Arch Linux Shorewall 4.5 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=archlinux
@@ -8,14 +8,14 @@ SHAREDIR=${PREFIX}/share               #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/share             #Directory for executable scripts.
 PERLLIBDIR=${PREFIX}/share/shorewall   #Directory to install Shorewall Perl module directory
 CONFDIR=/etc                           #Directory where subsystem configurations are installed
-SBINDIR=/usr/bin                       #Directory where system administration programs are installed
+SBINDIR=/usr/sbin                      #Directory where system administration programs are installed
 MANDIR=${SHAREDIR}/man                 #Directory where manpages are installed.
 INITDIR=                               #Directory where SysV init scripts are installed.
 INITFILE=                              #Name of the product's installed SysV init script
 INITSOURCE=                            #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                             #If non-zero, annotated configuration files are installed
 SYSCONFDIR=                            #Directory where SysV init parameter files are installed
-SERVICEDIR=/usr/lib/systemd/system     #Directory where .service files are installed (systems running systemd only)
+SYSTEMD=/usr/lib/systemd/system        #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                           #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SPARSE=                                #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                        #Directory where product variable data is stored.
--- a/Shorewall-core/shorewallrc.cygwin
+++ b/Shorewall-core/shorewallrc.cygwin
@@ -1,5 +1,5 @@
 #
-# Cygwin Shorewall 5.0 rc file
+# Cygwin Shorewall 4.5 rc file
 #
 BUILD=cygwin
 HOST=cygwin
@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                   #Unused on Cygwin
 INITFILE=                             #Unused on Cygwin
 INITSOURCE=                           #Unused on Cygwin
 ANNOTATED=                            #Unused on Cygwin
-SERVICEDIR=                           #Unused on Cygwin
+SYSTEMD=                              #Unused on Cygwin
 SERVICEFILE=                          #Unused on Cygwin
 SYSCONFDIR=                           #Unused on Cygwin
 SPARSE=Yes                            #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
--- a/Shorewall-core/shorewallrc.debian.sysvinit
+++ b/Shorewall-core/shorewallrc.debian.sysvinit
@@ -15,9 +15,9 @@ INITFILE=$PRODUCT                       #Name of the product's installed SysV in
 INITSOURCE=init.debian.sh               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
 SYSCONFFILE=default.debian              #Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default                 #Directory where SysV init parameter files are installed
-SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
+SYSTEMD=                                #Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes                              #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
--- a/Shorewall-core/shorewallrc.debian.systemd
+++ b/Shorewall-core/shorewallrc.debian.systemd
@@ -1,23 +0,0 @@
-#
-# Debian Shorewall 4.5 rc file
-#
-BUILD=					#Default is to detect the build system
-HOST=debian
-PREFIX=/usr				#Top-level directory for shared files, libraries, etc.
-SHAREDIR=${PREFIX}/share		#Directory for arch-neutral files.
-LIBEXECDIR=${PREFIX}/share		#Directory for executable scripts.
-PERLLIBDIR=${PREFIX}/share/shorewall	#Directory to install Shorewall Perl module directory
-CONFDIR=/etc				#Directory where subsystem configurations are installed
-SBINDIR=/sbin				#Directory where system administration programs are installed
-MANDIR=${PREFIX}/share/man		#Directory where manpages are installed.
-INITDIR=				#Directory where SysV init scripts are installed.
-INITFILE=				#Name of the product's installed SysV init script
-INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
-ANNOTATED=				#If non-zero, annotated configuration files are installed
-SYSCONFFILE=default.debian		#Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
-SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
-SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
-SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
-VARLIB=/var/lib				#Directory where product variable data is stored.
-VARDIR=${VARLIB}/$PRODUCT		#Directory where product variable data is stored.
--- a/Shorewall-core/shorewallrc.default
+++ b/Shorewall-core/shorewallrc.default
@@ -1,5 +1,5 @@
 #
-# Default Shorewall 5.0 rc file
+# Default Shorewall 4.5 rc file
 #
 HOST=linux                              #Generic Linux
 BUILD=                                  #Default is to detect the build system
@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                     #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.sh                      #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SERVICEDIR=                             #Directory where .service files are installed (systems running systemd only)
+SYSTEMD=                                #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                            #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=                            #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=                             #Directory where SysV init parameter files are installed
--- a/Shorewall-core/shorewallrc.openwrt
+++ b/Shorewall-core/shorewallrc.openwrt
@@ -1,23 +0,0 @@
-#
-# Created by Shorewall Core version 5.0.2-RC1 configure -  Fri, Nov 06, 2015 10:02:03 AM
-#
-# Input: host=openwrt
-#
-PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
-SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
-LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
-PERLLIBDIR=${PREFIX}/share/shorewall    #Directory to install Shorewall Perl module directory
-CONFDIR=/etc                            #Directory where subsystem configurations are installed
-SBINDIR=/sbin                           #Directory where system administration programs are installed
-MANDIR=                                 #Directory where manpages are installed.
-INITDIR=/etc/init.d                     #Directory where SysV init scripts are installed.
-INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
-INITSOURCE=init.openwrt.sh              #Name of the distributed file to be installed as the SysV init script
-ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SYSCONFDIR=${CONFDIR}/sysconfig         #Directory where SysV init parameter files are installed
-SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
-SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
-SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
-VARLIB=/lib                             #Directory where product variable data is stored.
-VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
--- a/Shorewall-core/shorewallrc.redhat
+++ b/Shorewall-core/shorewallrc.redhat
@@ -1,5 +1,5 @@
 #
-# RedHat/FedoraShorewall 5.0 rc file
+# RedHat/FedoraShorewall 4.5 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=redhat
@@ -14,7 +14,7 @@ INITDIR=/etc/rc.d/init.d                #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.fedora.sh               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
+SYSTEMD=/lib/systemd/system             #Directory where .service files are installed (systems running systemd only)
 SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed as $SYSCONFDIR/$PRODUCT
 SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter files are installed
--- a/Shorewall-core/shorewallrc.slackware
+++ b/Shorewall-core/shorewallrc.slackware
@@ -1,5 +1,5 @@
 #
-# Slackware Shorewall 5.0 rc file
+# Slackware Shorewall 4.5 rc file
 #
 BUILD=slackware
 HOST=slackware
@@ -15,7 +15,7 @@ AUXINITSOURCE=init.slackware.firewall.sh   #Name of the distributed file to be i
 AUXINITFILE=rc.firewall                    #Name of the product's installed SysV init script
 INITSOURCE=init.slackware.$PRODUCT.sh      #Name of the distributed file to be installed as a second SysV init script
 INITFILE=rc.$PRODUCT                       #Name of the product's installed second init script
-SERVICEDIR=                                #Name of the directory where .service files are installed (systems running systemd only)
+SYSTEMD=                                   #Name of the directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                               #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=                               #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=                                #Name of the directory where SysV init parameter files are installed.
--- a/Shorewall-core/shorewallrc.suse
+++ b/Shorewall-core/shorewallrc.suse
@@ -1,5 +1,5 @@
 #
-# SuSE Shorewall 5.0 rc file
+# SuSE Shorewall 4.5 rc file
 #
 BUILD=                                                #Default is to detect the build system
 HOST=suse
@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                                   #Directory where SysV init
 INITFILE=$PRODUCT                                     #Name of the product's SysV init script
 INITSOURCE=init.suse.sh                               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                                            #If non-zero, annotated configuration files are installed
-SERVICEDIR=                                           #Directory where .service files are installed (systems running systemd only)
+SYSTEMD=                                              #Directory where .service files are installed (systems running systemd only)
 SERVICEFILE=                      		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=sysconfig                                 #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=/etc/sysconfig/                            #Directory where SysV init parameter files are installed
--- a/Shorewall-core/uninstall.sh
+++ b/Shorewall-core/uninstall.sh
@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://www.shorewall.net
 #
@@ -27,9 +27,7 @@
 #       shown below. Simply run this script to remove Shorewall Firewall

 VERSION=xxx #The Build script inserts the actual version
-PRODUCT="shorewall-core"
-Product="Shorewall Core"
- 
+
 usage() # $1 = exit status
 {
    ME=$(basename $0)
@@ -37,12 +35,6 @@ usage() # $1 = exit status
    exit $1
 }

-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
 qt()
 {
    "$@" >/dev/null 2>&1
@@ -68,11 +60,6 @@ remove_file() # $1 = file to restore
    fi
 }

-#
-# Change to the directory containing this script
-#
-cd "$(dirname $0)"
-
 #
 # Read the RC file
 #
--- a/Shorewall-init/ifupdown.debian.sh
+++ b/Shorewall-init/ifupdown.debian.sh
@@ -28,7 +28,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
    fi

-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}

    if [ ! -x $STATEDIR/firewall ]; then
 	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
--- a/Shorewall-init/ifupdown.fedora.sh
+++ b/Shorewall-init/ifupdown.fedora.sh
@@ -31,7 +31,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
    fi

-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}

    if [ ! -x "$STATEDIR/firewall" ]; then
 	if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
--- a/Shorewall-init/ifupdown.suse.sh
+++ b/Shorewall-init/ifupdown.suse.sh
@@ -28,7 +28,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
    fi

-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}

    if [ ! -x $STATEDIR/firewall ]; then
 	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
--- a/Shorewall-init/init.debian.sh
+++ b/Shorewall-init/init.debian.sh
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -71,12 +71,10 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
    fi

-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}

    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
-    else
-	return 0
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || echo_notdone
    fi
 }

@@ -105,17 +103,21 @@ shorewall_start () {
  echo -n "Initializing \"Shorewall-based firewalls\": "

  for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-              #
-	      # Run in a sub-shell to avoid name collisions
-	      #
-	      (
-		  if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		      ${STATEDIR}/firewall ${OPTIONS} stop
-		  fi
-	      )
-	  fi
+      setstatedir
+
+      if [ -x ${STATEDIR}/firewall ]; then
+          #
+	  # Run in a sub-shell to avoid name collisions
+	  #
+	  ( 
+	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop || echo_notdone
+	      else
+		  echo_notdone
+	      fi
+	  )
+      else
+	  echo_notdone
      fi
  done

@@ -142,10 +144,10 @@ shorewall_stop () {

  echo -n "Clearing \"Shorewall-based firewalls\": "
  for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      ${STATEDIR}/firewall ${OPTIONS} clear
-	  fi
+      setstatedir
+
+      if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear || echo_notdone
      fi
  done

--- a/Shorewall-init/init.fedora.sh
+++ b/Shorewall-init/init.fedora.sh
@@ -42,7 +42,7 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
    fi

-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}

    if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
 	${SBINDIR}/$PRODUCT $OPTIONS compile -c
--- a/Shorewall-init/init.openwrt.sh
+++ b/Shorewall-init/init.openwrt.sh
@@ -1,131 +0,0 @@
-#!/bin/sh /etc/rc.common
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
-#
-#     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
-#     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)
-#
-#       On most distributions, this file should be called /etc/init.d/shorewall-init.
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-#
-
-# arg1 of init script is arg2 when rc.common is sourced
-
-case "$action" in
-  start|stop|boot)
-      if [ "$(id -u)" != "0" ]
-      then
-	  echo "You must be root to start, stop or restart \"Shorewall \"."
-	  exit 1
-      fi
-
-      # check if shorewall-init is configured or not
-      if [ -f "/etc/sysconfig/shorewall-init" ]
-      then
-	  . /etc/sysconfig/shorewall-init
-	  if [ -z "$PRODUCTS" ]
-	  then
-	      exit 0
-	  fi
-      else
-	  exit 0
-      fi
-
-      ;;
-  enable|disable|enabled)
-      # Openwrt related
-      # start and stop runlevel variable
-      START=19
-      STOP=91
-      ;;
-  *)
-      echo "Usage: /etc/init.d/shorewall-init {start|stop}"
-      exit 1
-esac
-
-#
-# The installer may alter this
-#
-. /usr/share/shorewall/shorewallrc
-
-# Locate the current PRODUCT's statedir
-setstatedir() {
-    local statedir
-    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
-	statedir=$( . ${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
-    fi
-
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
-
-    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
-    else
-	return 0
-    fi
-}
-
-# Initialize the firewall
-start () {
-    local PRODUCT
-  local STATEDIR
-
-  echo -n "Initializing \"Shorewall-based firewalls\": "
-  for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop
-	      fi
-	  fi
-      fi
-  done
-
-  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
-      ipset -R < "$SAVE_IPSETS"
-  fi
-}
-
-boot () {
-    start
-}
-
-# Clear the firewall
-stop () {
-    local PRODUCT
-    local STATEDIR
-
-    echo -n "Clearing \"Shorewall-based firewalls\": "
-    for PRODUCT in $PRODUCTS; do
-	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
-		${STATEDIR}/firewall ${OPTIONS} clear
-	    fi
-	fi
-    done
-
-    if [ -n "$SAVE_IPSETS" ]; then
-	mkdir -p $(dirname "$SAVE_IPSETS")
-	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
-	fi
-    fi
-}
-
--- a/Shorewall-init/init.sh
+++ b/Shorewall-init/init.sh
@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -67,12 +67,12 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
    fi

-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}

-    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
-    else
-	return 0
+    if [ ! -x $STATEDIR/firewall ]; then
+	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	    ${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
+	fi
    fi
 }

@@ -83,11 +83,11 @@ shorewall_start () {

  echo -n "Initializing \"Shorewall-based firewalls\": "
  for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop
-	      fi
+      setstatedir
+
+      if [ -x ${STATEDIR}/firewall ]; then
+	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+	      ${STATEDIR}/firewall ${OPTIONS} stop || exit 1
 	  fi
      fi
  done
@@ -106,10 +106,10 @@ shorewall_stop () {

  echo -n "Clearing \"Shorewall-based firewalls\": "
  for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      ${STATEDIR}/firewall ${OPTIONS} clear
-	  fi
+      setstatedir
+
+      if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear || exit 1
      fi
  done

--- a/Shorewall-init/init.suse.sh
+++ b/Shorewall-init/init.suse.sh
@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -38,7 +38,7 @@
 # 0 - success
 # 1 - generic or unspecified error
 # 2 - invalid or excess argument(s)
-# 3 - unimplemented feature
+# 3 - unimplemented feature (e.g. "reload")
 # 4 - insufficient privilege
 # 5 - program is not installed
 # 6 - program is not configured
@@ -77,12 +77,10 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
    fi

-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}

    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
-    else
-	return 0
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || exit
    fi
 }

@@ -93,12 +91,14 @@ shorewall_start () {

  echo -n "Initializing \"Shorewall-based firewalls\": "
  for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
-	  if [ -x $STATEDIR/firewall ]; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-		  $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
-	      fi
+      setstatedir
+
+      if [ -x $STATEDIR/firewall ]; then
+	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+	      $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop || exit
 	  fi
+      else
+	  exit 6
      fi
  done

@@ -114,10 +114,12 @@ shorewall_stop () {

  echo -n "Clearing \"Shorewall-based firewalls\": "
  for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      ${STATEDIR}/firewall ${OPTIONS} clear
-	  fi
+      setstatedir
+
+      if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear || exit
+      else
+	  exit 6
      fi
  done

--- a/Shorewall-init/install.sh
+++ b/Shorewall-init/install.sh
@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Init
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-20114 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2010 - Roberto C. Sanchez (roberto@connexer.com)
 #
 #       Shorewall documentation is available at http://shorewall.net
@@ -28,8 +28,6 @@
 #

 VERSION=xxx #The Build script inserts the actual version.
-PRODUCT=shorewall-init
-Product="Shorewall Init"

 usage() # $1 = exit status
 {
@@ -73,50 +71,39 @@ mywhich() {
    return 2
 }

+run_install()
+{
+    if ! install $*; then
+	echo
+	echo "ERROR: Failed to install $*" >&2
+	exit 1
+    fi
+}
+
 cant_autostart()
 {
    echo
    echo  "WARNING: Unable to configure shorewall init to start automatically at boot" >&2
 }

-install_file() # $1 = source $2 = target $3 = mode
-{
-    if cp -f $1 $2; then
-	if chmod $3 $2; then
-	    if [ -n "$OWNER" ]; then
-		if chown $OWNER:$GROUP $2; then
-		    return
-		fi
-	    else
-		return 0
-	    fi
-	fi
-    fi
-
-    echo "ERROR: Failed to install $2" >&2
-    exit 1
-}
-
-make_directory() # $1 = directory , $2 = mode
-{
-    mkdir -p $1
-    chmod 0755 $1
-    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
-}
-
 require() 
 {
    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }

-#
-# Change to the directory containing this script
-#
+install_file() # $1 = source $2 = target $3 = mode
+{
+    run_install $T $OWNERSHIP -m $3 $1 ${2}
+}
+
 cd "$(dirname $0)"

+PRODUCT=shorewall-init
+
 #
 # Parse the run line
 #
+T='-T'

 finished=0
 configure=1
@@ -201,8 +188,6 @@ done

 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin

-[ $configure -eq 1 ] && ETC=/etc || ETC="${CONFDIR}"
-
 if [ -z "$BUILD" ]; then
    case $(uname) in
 	cygwin*)
@@ -243,8 +228,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=slackware
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
-	    elif [ -f ${CONFDIR}/openwrt_release ]; then
-		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -252,24 +235,22 @@ if [ -z "$BUILD" ]; then
    esac
 fi

+[ -n "$OWNER" ] || OWNER=$(id -un)
+[ -n "$GROUP" ] || GROUP=$(id -gn)
+
 case $BUILD in
    apple)
-	[ -z "$OWNER" ] && OWNER=root
-	[ -z "$GROUP" ] && GROUP=wheel
+	T=
+	;;
+    debian|gentoo|redhat|suse|slackware|archlinux)
 	;;
-    cygwin*|CYGWIN*)
-	OWNER=$(id -un)
-	GROUP=$(id -gn)
- 	;;
    *)
-	if [ $(id -u) -eq 0 ]; then
-	    [ -z "$OWNER" ] && OWNER=root
-	    [ -z "$GROUP" ] && GROUP=root
-	fi
+	[ -n "$BUILD" ] && echo "ERROR: Unknown BUILD environment ($BUILD)" >&2 || echo "ERROR: Unknown BUILD environment"
+	exit 1
 	;;
 esac

-[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
+OWNERSHIP="-o $OWNER -g $GROUP"

 [ -n "$HOST" ] || HOST=$BUILD

@@ -294,9 +275,6 @@ case "$HOST" in
    suse)
 	echo "Installing SuSE-specific configuration..."
 	;;
-    openwrt)
-	echo "Installing Openwrt-specific configuration..."
-	;;
    linux)
 	echo "ERROR: Shorewall-init is not supported on this system" >&2
 	exit 1
@@ -310,12 +288,12 @@ esac
 [ -z "$TARGET" ] && TARGET=$HOST

 if [ -n "$DESTDIR" ]; then
-    if [ $(id -u) != 0 ] ; then
+    if [ `id -u` != 0 ] ; then
 	echo "Not setting file owner/group permissions, not running as root."
 	OWNERSHIP=""
    fi
    
-    make_directory ${DESTDIR}${INITDIR} 0755
+    install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
 fi

 echo "Installing Shorewall Init Version $VERSION"
@@ -331,7 +309,7 @@ fi

 if [ -n "$DESTDIR" ]; then
    mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
-    chmod 0755 ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
 fi

 #
@@ -352,21 +330,17 @@ fi
 #
 # Install the .service file
 #
-if [ -z "${SERVICEDIR}" ]; then
-    SERVICEDIR="$SYSTEMD"
-fi
-
-if [ -n "$SERVICEDIR" ]; then
-    mkdir -p ${DESTDIR}${SERVICEDIR}
+if [ -n "$SYSTEMD" ]; then
+    mkdir -p ${DESTDIR}${SYSTEMD}
    [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
-    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
-    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
    if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${SBINDIR}
-        chmod 0755 ${DESTDIR}${SBINDIR}
+        chmod 755 ${DESTDIR}${SBINDIR}
    fi
-    install_file shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init 0700
+    run_install $OWNERSHIP -m 700 shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init
    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall-init
    echo "CLI installed as ${DESTDIR}${SBINDIR}/shorewall-init"
 fi
@@ -375,13 +349,13 @@ fi
 # Create /usr/share/shorewall-init if needed
 #
 mkdir -p ${DESTDIR}${SHAREDIR}/shorewall-init
-chmod 0755 ${DESTDIR}${SHAREDIR}/shorewall-init
+chmod 755 ${DESTDIR}${SHAREDIR}/shorewall-init

 #
 # Install logrotate file
 #
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
+    run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
    echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi

@@ -389,7 +363,7 @@ fi
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/shorewall-init/version
-chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
+chmod 644 ${DESTDIR}${SHAREDIR}/shorewall-init/version

 #
 # Remove and create the symbolic link to the init script
@@ -401,9 +375,9 @@ fi

 if [ $HOST = debian ]; then
    if [ -n "${DESTDIR}" ]; then
-	mkdir -p ${DESTDIR}${ETC}/network/if-up.d/
-	mkdir -p ${DESTDIR}${ETC}/network/if-down.d/
-	mkdir -p ${DESTDIR}${ETC}/network/if-post-down.d/
+	mkdir -p ${DESTDIR}/etc/network/if-up.d/
+	mkdir -p ${DESTDIR}/etc/network/if-down.d/
+	mkdir -p ${DESTDIR}/etc/network/if-post-down.d/
    elif [ $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
 	mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
@@ -412,12 +386,15 @@ if [ $HOST = debian ]; then

    if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
-	    mkdir ${DESTDIR}${ETC}/default
+	    mkdir ${DESTDIR}/etc/default
 	fi

-	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
-	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
-	echo "sysconfig file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+	if [ $configure -eq 1 ]; then
+	    install_file sysconfig ${DESTDIR}/etc/default/shorewall-init 0644
+	else
+	    mkdir -p ${DESTDIR}${CONFDIR}/default
+	    install_file sysconfig ${DESTDIR}${CONFDIR}/default/shorewall-init 0644
+	fi
    fi

    IFUPDOWN=ifupdown.debian.sh
@@ -427,23 +404,20 @@ else

 	if [ -z "$RPM" ]; then
 	    if [ $HOST = suse ]; then
-		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-up.d
-		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-down.d
+		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-up.d
+		mkdir -p ${DESTDIR}/etc/sysconfig/network/if-down.d
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
-	    elif [ $HOST = openwrt ]; then
-		# Not implemented on openwrt
-		/bin/true
 	    else
-		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
+		mkdir -p ${DESTDIR}/etc/NetworkManager/dispatcher.d
 	    fi
 	fi
    fi

    if [ -n "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
-	install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT 0644
-	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+	run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT
+	echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
    fi

    [ $HOST = suse ] && IFUPDOWN=ifupdown.suse.sh || IFUPDOWN=ifupdown.fedora.sh
@@ -453,19 +427,21 @@ fi
 # Install the ifupdown script
 #

-if [ $HOST != openwrt ]; then
-    cp $IFUPDOWN ifupdown
+cp $IFUPDOWN ifupdown

-    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
+[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown

-    mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
+mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init

-    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
-fi
+install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544

 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
-    [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
-    install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
+    if [ $configure -eq 1 ]; then
+	install_file ifupdown ${DESTDIR}/etc/NetworkManager/dispatcher.d/01-shorewall 0544
+    else
+	mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
+	install_file ifupdown ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall 0544
+    fi
 fi

 case $HOST in
@@ -514,13 +490,9 @@ case $HOST in
 esac

 if [ -z "$DESTDIR" ]; then
-    if [ $configure -eq 1 -a -n "first_install" ]; then
+    if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian ]; then
-	    if [ -n "$SERVICEDIR" ]; then
-		if systemctl enable ${PRODUCT}.service; then
-                    echo "Shorewall Init will start automatically at boot"
-		fi
-	    elif mywhich insserv; then
+	    if mywhich insserv; then
 		if insserv ${INITDIR}/shorewall-init; then
 		    echo "Shorewall Init will start automatically at boot"
 		else
@@ -536,19 +508,12 @@ if [ -z "$DESTDIR" ]; then
 	    else
 		cant_autostart
 	    fi
-	elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
-	    /etc/init.d/$PRODUCT enable
-	    if /etc/init.d/$PRODUCT enabled; then
-		echo "$Product will start automatically at boot"
-	    else
-		cant_autostart
-	    fi
 	elif [ $HOST = gentoo ]; then
 	    # On Gentoo, a service must be enabled manually by the user,
 	    # not by the installer
 	    /bin/true
 	else
-	    if [ -n "$SERVICEDIR" ]; then
+	    if [ -n "$SYSTEMD" ]; then
 		if systemctl enable shorewall-init.service; then
 		    echo "Shorewall Init will start automatically at boot"
 		fi
@@ -571,13 +536,6 @@ if [ -z "$DESTDIR" ]; then
 		else
 		    cant_autostart
 		fi
-	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
-		/etc/init.d/shorewall-inir enable
-		if /etc/init.d/shorewall-init enabled; then
-		    echo "Shorrewall Init will start automatically at boot"
-		else
-		    cant_autostart
-		fi
 	    else
 		cant_autostart
 	    fi
@@ -598,7 +556,7 @@ fi

 [ -z "${DESTDIR}" ] && [ ! -f ~/.shorewallrc ] && cp ${SHAREDIR}/shorewall/shorewallrc .

-if [ -d ${DESTDIR}/etc/ppp ]; then
+if [ -f ${DESTDIR}/etc/ppp ]; then
    case $HOST in
 	debian|suse)
 	    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
--- a/Shorewall-init/shorewall-init
+++ b/Shorewall-init/shorewall-init
@@ -1,19 +1,18 @@
-#!/bin/bash
-#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#! /bin/bash
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
-#	(c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
-#	On most distributions, this file should be called
-#	/etc/init.d/shorewall.
+#       On most distributions, this file should be called /etc/init.d/shorewall.
 #
-#	Complete documentation is available at http://shorewall.net
+#       Complete documentation is available at http://shorewall.net
 #
-#	This program is part of Shorewall.
+#       This program is part of Shorewall.
 #
 #	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by
-#	the Free Software Foundation, either version 2 of the license or,
-#	at your option, any later version.
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
 #
 #	This program is distributed in the hope that it will be useful,
 #	but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -23,7 +22,7 @@
 #	You should have received a copy of the GNU General Public License
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
-###############################################################################
+#########################################################################################
 # set the STATEDIR variable
 setstatedir() {
    local statedir
@@ -31,12 +30,10 @@ setstatedir() {
 	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
    fi

-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARDIR}/${PRODUCT}

    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
-    else
-	return 0
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c || exit 1
    fi
 }

@@ -49,7 +46,7 @@ setstatedir() {
 if [ -f "$SYSCONFDIR/shorewall-init" ]; then
    . $SYSCONFDIR/shorewall-init
    if [ -z "$PRODUCTS" ]; then
-	echo "ERROR: No products configured" >&2
+        echo "ERROR: No products configured" >&2
 	exit 1
    fi
 else
@@ -59,66 +56,71 @@ fi

 # Initialize the firewall
 shorewall_start () {
-    local PRODUCT
-    local STATEDIR
+  local PRODUCT
+  local STATEDIR

-    echo -n "Initializing \"Shorewall-based firewalls\": "
-    for PRODUCT in $PRODUCTS; do
-	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
-		#
-		# Run in a sub-shell to avoid name collisions
-		#
-		(
-		    if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-			${STATEDIR}/firewall ${OPTIONS} stop
-		    fi
-		)
-	    fi
-	fi
-    done
+  echo -n "Initializing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      setstatedir

-    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
-	ipset -R < "$SAVE_IPSETS"
-    fi
+      if [ -x ${STATEDIR}/firewall ]; then
+          #
+	  # Run in a sub-shell to avoid name collisions
+	  #
+	  (
+	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop || exit 1
+	      else
+		  exit 1
+	      fi
+	  )
+      else
+          echo ERROR:  ${STATEDIR}/firewall does not exist or is not executable!
+	  exit 1
+      fi
+  done

-    return 0
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+      ipset -R < "$SAVE_IPSETS"
+  fi
+
+  return 0
 }

 # Clear the firewall
 shorewall_stop () {
-    local PRODUCT
-    local STATEDIR
+  local PRODUCT
+  local STATEDIR

-    echo -n "Clearing \"Shorewall-based firewalls\": "
-    for PRODUCT in $PRODUCTS; do
-	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
-		${STATEDIR}/firewall ${OPTIONS} clear
-	    fi
-	fi
-    done
+  echo -n "Clearing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      setstatedir

-    if [ -n "$SAVE_IPSETS" ]; then
-	mkdir -p $(dirname "$SAVE_IPSETS")
-	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
-	fi
-    fi
+      if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear || exit 1
+      fi
+  done

-    return 0
+  if [ -n "$SAVE_IPSETS" ]; then
+      mkdir -p $(dirname "$SAVE_IPSETS")
+      if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+      fi
+  fi
+
+  return 0
 }

 case "$1" in
-    start)
-	shorewall_start
-	;;
-    stop)
-	shorewall_stop
-	;;
-    *)
-	echo "Usage: $0 {start|stop}"
-	exit 1
+  start)
+     shorewall_start
+     ;;
+  stop)
+     shorewall_stop
+     ;;
+  *)
+     echo "Usage: $0 {start|stop}"
+     exit 1
 esac

 exit 0
--- a/Shorewall-init/shorewall-init.service
+++ b/Shorewall-init/shorewall-init.service
@@ -4,17 +4,17 @@
 #     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
 #
 [Unit]
-Description=Shorewall firewall (bootup security)
-Before=network-pre.target
-Wants=network-pre.target
+Description=Shorewall IPv4 firewall (bootup security)
+Before=network.target
+Conflicts=iptables.service firewalld.service

 [Service]
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-init
 StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
+ExecStart=/sbin/shorewall-init $OPTIONS start
+ExecStop=/sbin/shorewall-init $OPTIONS stop

 [Install]
 WantedBy=basic.target
--- a/Shorewall-init/shorewall-init.service.debian
+++ b/Shorewall-init/shorewall-init.service.debian
@@ -1,20 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/default/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target
--- a/Shorewall-init/uninstall.sh
+++ b/Shorewall-init/uninstall.sh
@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.sourceforge.net
 #
@@ -27,8 +27,6 @@
 #       shown below. Simply run this script to remove Shorewall Firewall

 VERSION=xxx  #The Build script inserts the actual version
-PRODUCT=shorewall-init
-Product="Shorewall Init"

 usage() # $1 = exit status
 {
@@ -37,12 +35,6 @@ usage() # $1 = exit status
    exit $1
 }

-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
 qt()
 {
    "$@" >/dev/null 2>&1
@@ -77,11 +69,6 @@ remove_file() # $1 = file to restore
    fi
 }

-#
-# Change to the directory containing this script
-#
-cd "$(dirname $0)"
-
 finished=0
 configure=1

@@ -169,11 +156,7 @@ INITSCRIPT=${CONFDIR}/init.d/shorewall-init

 if [ -f "$INITSCRIPT" ]; then
    if [ $configure -eq 1 ]; then
-	if [ $HOST = openwrt ]; then
-	    if /etc/init.d/shorewall-init enabled; then
-		/etc/init.d/shorewall-init disable
-	    fi
-	elif mywhich updaterc.d ; then
+	if mywhich updaterc.d ; then
 	    updaterc.d shorewall-init remove
 	elif mywhich insserv ; then
            insserv -r $INITSCRIPT
@@ -185,22 +168,13 @@ if [ -f "$INITSCRIPT" ]; then
    remove_file $INITSCRIPT
 fi

-if [ -z "${SERVICEDIR}" ]; then
-    SERVICEDIR="$SYSTEMD"
-fi
-
-if [ -n "$SERVICEDIR" ]; then
+if [ -n "$SYSTEMD" ]; then
    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
-    rm -f $SERVICEDIR/shorewall-init.service
+    rm -f $SYSTEMD/shorewall-init.service
 fi

-if [ $HOST = openwrt ]; then
-    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
-else
-    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
-fi
+[ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+[ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local

 remove_file ${CONFDIR}/default/shorewall-init
 remove_file ${CONFDIR}/sysconfig/shorewall-init
@@ -214,16 +188,16 @@ remove_file ${CONFDIR}/network/if-post-down.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-up.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-down.d/shorewall

+[ -n "$SYSTEMD" ] && remove_file ${SYSTEMD}/shorewall.service
+
 if [ -d ${CONFDIR}/ppp ]; then
    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
 	remove_file ${CONFDIR}/ppp/$directory/shorewall
    done

    for file in if-up.local if-down.local; do
-	if [ -f ${CONFDIR}/ppp/$file ]; then
-	    if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
-		remove_file ${CONFDIR}/ppp/$FILE
-	    fi
+	if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
+	    remove_file ${CONFDIR}/ppp/$FILE
 	fi
    done
 fi
--- a/Shorewall-lite/configpath
+++ b/Shorewall-lite/configpath
@@ -1,5 +1,5 @@
 #
-# Shorewall Lite version 5 - Default Config Path
+# Shorewall Lite version 4.1 - Default Config Path
 #
 # /usr/share/shorewall-lite/configpath
 #
--- a/Shorewall-lite/init.fedora.sh
+++ b/Shorewall-lite/init.fedora.sh
@@ -39,7 +39,7 @@ fi

 start() {
    echo -n $"Starting Shorewall: "
-    $shorewall $OPTIONS start $STARTOPTIONS 2>&1 | $logger
+    $shorewall $OPTIONS start 2>&1 | $logger
    retval=${PIPESTATUS[0]}
    if [[ $retval == 0 ]]; then
 	touch $lockfile
@@ -69,7 +69,7 @@ restart() {
 # Note that we don't simply stop and start since shorewall has a built in
 # restart which stops the firewall if running and then starts it.
    echo -n $"Restarting Shorewall: "
-    $shorewall $OPTIONS restart $RESTARTOPTIONS 2>&1 | $logger
+    $shorewall $OPTIONS restart 2>&1 | $logger
    retval=${PIPESTATUS[0]}
    if [[ $retval == 0 ]]; then
 	touch $lockfile
--- a/Shorewall-lite/init.openwrt.sh
+++ b/Shorewall-lite/init.openwrt.sh
@@ -1,94 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
-#
-#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
-#     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)
-#
-#	On most distributions, this file should be called /etc/init.d/shorewall.
-#
-#	Complete documentation is available at http://shorewall.net
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-#	If an error occurs while starting or restarting the firewall, the
-#	firewall is automatically stopped.
-#
-#	Commands are:
-#
-#	   shorewall-lite start			  Starts the firewall
-#	   shorewall-lite restart		  Restarts the firewall
-#	   shorewall-lite reload		  Reload the firewall
-#	   shorewall-lite stop			  Stops the firewall
-#	   shorewall-lite status		  Displays firewall status
-#
-
-# description: Packet filtering firewall
-
-# Openwrt related
-# Start and stop runlevel variable
-START=50
-STOP=89
-# Displays the status command
-EXTRA_COMMANDS="status"
-EXTRA_HELP=" status Displays firewall status"
-
-################################################################################
-# Get startup options (override default)
-################################################################################
-OPTIONS=
-
-#
-# The installer may alter this
-#
-. /usr/share/shorewall/shorewallrc
-
-if [ -f ${SYSCONFDIR}/shorewall-lite ]; then
-    . ${SYSCONFDIR}/shorewall-lite
-fi
-
-SHOREWALL_INIT_SCRIPT=1
-
-################################################################################
-# E X E C U T I O N    B E G I N S   H E R E				       #
-################################################################################
-# Arg1 of init script is arg2 when rc.common is sourced; set to action variable
-command="$action"
-
-start() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STARTOPTIONS
-}
-
-boot() {
-	local command="start"
-	start
-}
-
-restart() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RESTARTOPTIONS
-}
-
-reload() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RELOADOPTION
-}
-
-stop() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STOPOPTIONS
-}
-
-status() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $@
-}
--- a/Shorewall-lite/install.sh
+++ b/Shorewall-lite/install.sh
@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Lite
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -67,6 +67,15 @@ mywhich() {
    return 2
 }

+run_install()
+{
+    if ! install $*; then
+	echo
+	echo "ERROR: Failed to install $*" >&2
+	exit 1
+    fi
+}
+
 cant_autostart()
 {
    echo
@@ -80,28 +89,7 @@ delete_file() # $1 = file to delete

 install_file() # $1 = source $2 = target $3 = mode
 {
-    if cp -f $1 $2; then
-	if chmod $3 $2; then
-	    if [ -n "$OWNER" ]; then
-		if chown $OWNER:$GROUP $2; then
-		    return
-		fi
-	    else
-		return 0
-	    fi
-	fi
-    fi
-
-    echo "ERROR: Failed to install $2" >&2
-    exit 1
-}
-
-make_directory() # $1 = directory , $2 = mode
-{
-    mkdir -p $1
-    chmod 755 $1
-    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
-
+    run_install $T $OWNERSHIP -m $3 $1 ${2}
 }

 require()
@@ -199,7 +187,7 @@ elif [ -z "${VARDIR}" ]; then
    VARDIR=${VARLIB}/${PRODUCT}
 fi

-for var in SHAREDIR LIBEXECDIR CONFDIR SBINDIR VARLIB VARDIR; do
+for var in SHAREDIR LIBEXECDIRDIRDIR CONFDIR SBINDIR VARLIB VARDIR; do
    require $var
 done

@@ -213,6 +201,8 @@ PATH=${SBINDIR}:/bin:/usr${SBINDIR}:/usr/bin:/usr/local/bin:/usr/local${SBINDIR}
 # Determine where to install the firewall script
 #
 cygwin=
+INSTALLD='-D'
+T='-T'

 if [ -z "$BUILD" ]; then
    case $(uname) in
@@ -255,8 +245,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=slackware
 	    elif [ -f ${CONFDIR}/arch-release ] ; then
 		BUILD=archlinux
-	    elif [ -f ${CONFDIR}/openwrt_release ]; then
-		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -272,16 +260,16 @@ case $BUILD in
    apple)
 	[ -z "$OWNER" ] && OWNER=root
 	[ -z "$GROUP" ] && GROUP=wheel
+	INSTALLD=
+	T=
 	;;
    *)
-	if [ $(id -u) -eq 0 ]; then
-	    [ -z "$OWNER" ] && OWNER=root
-	    [ -z "$GROUP" ] && GROUP=root
-	fi
+	[ -z "$OWNER" ] && OWNER=root
+	[ -z "$GROUP" ] && GROUP=root
 	;;
 esac

-[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
+OWNERSHIP="-o $OWNER -g $GROUP"

 [ -n "$HOST" ] || HOST=$BUILD

@@ -312,9 +300,6 @@ case "$HOST" in
    suse)
 	echo "Installing Suse-specific configuration..."
 	;;
-    openwrt)
-	echo "Installing OpenWRT-specific configuration..."
-	;;
    linux)
 	;;
    *)
@@ -331,9 +316,8 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
    fi

-    make_directory ${DESTDIR}${SBINDIR} 755
-    make_directory ${DESTDIR}${INITDIR} 755
-
+    install -d $OWNERSHIP -m 755 ${DESTDIR}/${SBINDIR}
+    install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
 else
    if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
 	echo "$PRODUCT $VERSION requires Shorewall Core which does not appear to be installed" >&2
@@ -373,7 +357,7 @@ fi
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules

 install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
-[ -n "${INITFILE}" ] && make_directory ${DESTDIR}${INITDIR} 755
+[ -n "${INITFILE}" ] && install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}

 echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"

@@ -397,7 +381,7 @@ fi

 if [ -n "$INITFILE" ]; then
    if [ -f "${INITSOURCE}" ]; then
-	initfile="${DESTDIR}${INITDIR}/${INITFILE}"
+	initfile="${DESTDIR}/${INITDIR}/${INITFILE}"
 	install_file ${INITSOURCE} "$initfile" 0544

 	[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' "$initfile"
@@ -408,16 +392,12 @@ fi
 #
 # Install the .service file
 #
-if [ -z "${SERVICEDIR}" ]; then
-    SERVICEDIR="$SYSTEMD"
-fi
-
-if [ -n "$SERVICEDIR" ]; then
-    mkdir -p ${DESTDIR}${SERVICEDIR}
+if [ -n "$SYSTEMD" ]; then
+    mkdir -p ${DESTDIR}${SYSTEMD}
    [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 644
-    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
-    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SYSTEMD}/$PRODUCT.service
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SYSTEMD}/$PRODUCT.service
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SYSTEMD}/$PRODUCT.service"
 fi
 #
 # Install the config file
@@ -437,9 +417,9 @@ fi
 #
 # Install the  Makefile
 #
-install_file Makefile ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile 0600
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
-[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
+run_install $OWNERSHIP -m 0600 Makefile ${DESTDIR}${CONFDIR}/$PRODUCT
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${CONFDIR}/$PRODUCT/Makefile
+[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}/${CONFDIR}/$PRODUCT/Makefile
 echo "Makefile installed as ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile"

 #
@@ -454,7 +434,7 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 for f in lib.* ; do
    if [ -f $f ]; then
 	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-	echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+	echo "Library ${f#*.} file installed as ${DESTDIR}/${SHAREDIR}/$PRODUCT/$f"
    fi
 done

@@ -467,7 +447,7 @@ echo "Common functions linked through ${DESTDIR}${SHAREDIR}/$PRODUCT/functions"
 #

 install_file shorecap ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap 0755
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${LIBEXECDIR}/$PRODUCT/shorecap

 echo
 echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap"
@@ -477,17 +457,17 @@ echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shor
 #

 if [ -f modules ]; then
-    install_file modules ${DESTDIR}${SHAREDIR}/$PRODUCT/modules 0600
+    run_install $OWNERSHIP -m 0600 modules ${DESTDIR}${SHAREDIR}/$PRODUCT
    echo "Modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/modules"
 fi

 if [ -f helpers ]; then
-    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 600
+    run_install $OWNERSHIP -m 0600 helpers ${DESTDIR}${SHAREDIR}/$PRODUCT
    echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
 fi

 for f in modules.*; do
-    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 644
+    run_install $OWNERSHIP -m 0644 $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f
    echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
 done

@@ -498,17 +478,17 @@ done
 if [ -d manpages ]; then
    cd manpages

-    mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
+    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/

    for f in *.5; do
 	gzip -c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 644
+	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
    done

    for f in *.8; do
 	gzip -c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
+	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
    done

@@ -518,7 +498,7 @@ if [ -d manpages ]; then
 fi

 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 644
+    run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
    echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi

@@ -549,17 +529,17 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
 	chmod 755 ${DESTDIR}${SYSCONFDIR}
    fi

-    install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
+    run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT}
    echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi

 if [ ${SHAREDIR} != /usr/share ]; then
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SBINDIR}/$PRODUCT
 fi

 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
-    if [ -n "$SERVICEDIR" ]; then
+    if [ -n "$SYSTEMD" ]; then
 	if systemctl enable ${PRODUCT}.service; then
 	    echo "$Product will start automatically at boot"
 	fi
@@ -603,13 +583,6 @@ if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${
 	else
 	    cant_autostart
 	fi
-    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
-	/etc/init.d/$PRODUCT enable
-	if /etc/init.d/$PRODUCT enabled; then
-            echo "$PRODUCT will start automatically at boot"
-	else
-            cant_autostart
-	fi
    elif [ "$INITFILE" != rc.${PRODUCT} ]; then #Slackware starts this automatically
 	cant_autostart
    fi
--- a/Shorewall-lite/manpages/shorewall-lite.xml
+++ b/Shorewall-lite/manpages/shorewall-lite.xml
@@ -47,19 +47,6 @@
      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>allow</option></arg>
-
-      <arg choice="plain"><replaceable>address</replaceable></arg>
-    </cmdsynopsis>
-
    <cmdsynopsis>
      <command>shorewall-lite</command>

@@ -72,21 +59,6 @@
      choice="plain"><option>clear</option><arg><option>-f</option></arg></arg>
    </cmdsynopsis>

-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>close</option><arg choice="req">
-      <replaceable>open-number</replaceable> |
-      <replaceable>source</replaceable><replaceable>dest</replaceable><arg><replaceable>protocol</replaceable><arg>
-      <replaceable>port</replaceable> </arg></arg></arg><replaceable>
-      </replaceable></arg>
-    </cmdsynopsis>
-
    <cmdsynopsis>
      <command>shorewall-lite</command>

@@ -144,8 +116,6 @@
      <arg><option>-l</option></arg>

      <arg><option>-m</option></arg>
-
-      <arg><option>-c</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
@@ -293,29 +263,6 @@
      expression</replaceable></arg>
    </cmdsynopsis>

-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg choice="plain"><option>open</option><replaceable>
-      source</replaceable><replaceable> dest</replaceable><arg>
-      <replaceable>protocol</replaceable><arg> <replaceable>port</replaceable>
-      </arg> </arg></arg>
-    </cmdsynopsis>
-
-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>reenable</option></arg>
-
-      <arg choice="plain">{ <replaceable>interface</replaceable> |
-      <replaceable>provider</replaceable> }</arg>
-    </cmdsynopsis>
-
    <cmdsynopsis>
      <command>shorewall-lite</command>

@@ -329,21 +276,6 @@
      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>reload</option></arg>
-
-      <arg><option>-n</option></arg>
-
-      <arg><option>-p</option><arg><option>-C</option></arg></arg>
-    </cmdsynopsis>
-
    <cmdsynopsis>
      <command>shorewall-lite</command>

@@ -367,7 +299,9 @@

      <arg><option>-n</option></arg>

-      <arg><option>-p</option><arg><option>-C</option></arg></arg>
+      <arg><option>-p</option></arg>
+
+      <arg><replaceable>directory</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
@@ -380,8 +314,6 @@

      <arg choice="plain"><option>restore</option></arg>

-      <arg><option>-C</option></arg>
-
      <arg><replaceable>filename</replaceable></arg>
    </cmdsynopsis>

@@ -408,23 +340,11 @@

      <arg>-<replaceable>options</replaceable></arg>

-      <arg
-      choice="plain"><option>save</option><arg><option>-C</option></arg></arg>
+      <arg choice="plain"><option>save</option></arg>

      <arg choice="opt"><replaceable>filename</replaceable></arg>
    </cmdsynopsis>

-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="plain"><option>savesets</option></arg>
-    </cmdsynopsis>
-
    <cmdsynopsis>
      <command>shorewall-lite</command>

@@ -432,7 +352,7 @@

      <arg>-<replaceable>options</replaceable></arg>

-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>

      <arg><option>-b</option></arg>

@@ -454,7 +374,7 @@

      <arg>-<replaceable>options</replaceable></arg>

-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>

      <arg><option>-x</option></arg>

@@ -468,7 +388,7 @@

      <arg>-<replaceable>options</replaceable></arg>

-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>

      <arg><option>-f</option></arg>

@@ -482,7 +402,7 @@

      <arg>-<replaceable>options</replaceable></arg>

-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>

      <arg
      choice="req"><option>classifiers|connections|config|events|filters|ip|ipa|zones|policies|marks</option></arg>
@@ -495,7 +415,7 @@

      <arg>-<replaceable>options</replaceable></arg>

-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>

      <arg choice="plain"><option>event</option><arg
      choice="plain"><replaceable>event</replaceable></arg></arg>
@@ -508,25 +428,11 @@

      <arg>-<replaceable>options</replaceable></arg>

-      <arg choice="req"><option>show | list | ls </option></arg>
-
-      <arg><option>-c</option></arg>
-
-      <arg choice="plain"><option>routing</option></arg>
-    </cmdsynopsis>
-
-    <cmdsynopsis>
-      <command>shorewall-lite</command>
-
-      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
-
-      <arg>-<replaceable>options</replaceable></arg>
-
-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>

      <arg><option>-x</option></arg>

-      <arg choice="req"><option>mangle|nat|raw|rawpost</option></arg>
+      <arg choice="req"><option>mangle|nat|routing|raw|rawpost</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
@@ -536,7 +442,7 @@

      <arg>-<replaceable>options</replaceable></arg>

-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>

      <arg choice="plain"><option>tc</option></arg>
    </cmdsynopsis>
@@ -548,7 +454,7 @@

      <arg>-<replaceable>options</replaceable></arg>

-      <arg choice="req"><option>show | list | ls </option></arg>
+      <arg choice="opt"><option>show | list | ls </option></arg>

      <arg><option>-m</option></arg>

@@ -568,10 +474,6 @@
      <arg><option>-n</option></arg>

      <arg><option>-p</option></arg>
-
-      <arg><option>-f</option></arg>
-
-      <arg><option>-C</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
@@ -624,9 +526,8 @@

    <para>The nolock <option>option</option> prevents the command from
    attempting to acquire the Shorewall-lite lockfile. It is useful if you
-    need to include <command>shorewall</command> commands in the
-    <filename>started</filename> <ulink
-    url="../shorewall_extension_scripts.html">extension script</ulink>.</para>
+    need to include <command>shorewall</command> commands in
+    <filename>/etc/shorewall/started</filename>.</para>

    <para>The <emphasis>options</emphasis> control the amount of output that
    the command produces. They consist of a sequence of the letters <emphasis
@@ -637,8 +538,8 @@
    role="bold">v</emphasis> adds one to the effective verbosity and each
    <emphasis role="bold">q</emphasis> subtracts one from the effective
    VERBOSITY. Alternately, <emphasis role="bold">v</emphasis> may be followed
-    immediately with one of -1,0,1,2 to specify VERBOSITY. There may be no
-    white-space between <emphasis role="bold">v</emphasis> and the
+    immediately with one of -1,0,1,2 to specify a specify VERBOSITY. There may
+    be no white-space between <emphasis role="bold">v</emphasis> and the
    VERBOSITY.</para>

    <para>The <emphasis>options</emphasis> may also include the letter
@@ -653,10 +554,7 @@

    <variablelist>
      <varlistentry>
-        <term><emphasis role="bold">add </emphasis>{
-        <replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
-        <replaceable>zone</replaceable> | <replaceable>zone</replaceable>
-        <replaceable>host-list</replaceable> }</term>
+        <term><emphasis role="bold">add</emphasis></term>

        <listitem>
          <para>Adds a list of hosts or subnets to a dynamic zone usually used
@@ -681,8 +579,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">allow
-        </emphasis><replaceable>address</replaceable></term>
+        <term><emphasis role="bold">allow</emphasis></term>

        <listitem>
          <para>Re-enables receipt of packets from hosts previously
@@ -694,25 +591,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">call <replaceable>function</replaceable> [
-        <replaceable>parameter</replaceable> ... ]</emphasis></term>
-
-        <listitem>
-          <para>Added in Shorewall 4.6.10. Allows you to call a function in
-          one of the Shorewall libraries or in your compiled script. function
-          must name the shell function to be called. The listed parameters are
-          passed to the function.</para>
-
-          <para>The function is first searched for in
-          <filename>lib.base</filename>, <filename>lib.common</filename> and
-          <filename>lib.cli</filename>. If it is not found, the call command
-          is passed to the generated script to be executed.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">clear
-        </emphasis>[-<option>f</option>]</term>
+        <term><emphasis role="bold">clear</emphasis></term>

        <listitem>
          <para>Clear will remove all rules and chains installed by
@@ -723,38 +602,13 @@
          <para>If <option>-f</option> is given, the command will be processed
          by the compiled script that executed the last successful <emphasis
          role="bold">start</emphasis>, <emphasis
-          role="bold">reload</emphasis>, <emphasis
          role="bold">restart</emphasis> or <emphasis
          role="bold">refresh</emphasis> command if that script exists.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">close</emphasis> {
-        <replaceable>open-number</replaceable> |
-        <replaceable>source</replaceable> <replaceable>dest</replaceable> [
-        <replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
-        ] ] }</term>
-
-        <listitem>
-          <para>Added in Shorewall 4.5.8. This command closes a temporary open
-          created by the <command>open</command> command. In the first form,
-          an <replaceable>open-number</replaceable> specifies the open to be
-          closed. Open numbers are displayed in the <emphasis
-          role="bold">num</emphasis> column of the output of the
-          <command>shorewall-lite show opens </command>command.</para>
-
-          <para>When the second form of the command is used, the parameters
-          must match those given in the earlier <command>open</command>
-          command.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">delete </emphasis>{
-        <replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
-        <replaceable>zone</replaceable> | <replaceable>zone</replaceable>
-        <replaceable>host-list</replaceable> }</term>
+        <term><emphasis role="bold">delete</emphasis></term>

        <listitem>
          <para>The delete command reverses the effect of an earlier <emphasis
@@ -769,9 +623,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">disable </emphasis>{
-        <replaceable>interface</replaceable> |
-        <replaceable>provider</replaceable> }</term>
+        <term><emphasis role="bold">disable</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.4.26. Disables the optional provider
@@ -783,8 +635,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">drop
-        </emphasis><replaceable>address</replaceable></term>
+        <term><emphasis role="bold">drop</emphasis></term>

        <listitem>
          <para>Causes traffic from the listed <emphasis>address</emphasis>es
@@ -793,9 +644,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">dump </emphasis>[-<option>x</option>]
-        [-<option>l</option>] [-<option>m</option>]
-        [-<option>c</option>]</term>
+        <term><emphasis role="bold">dump</emphasis></term>

        <listitem>
          <para>Produces a verbose report about the firewall configuration for
@@ -809,16 +658,11 @@

          <para>The <emphasis role="bold">-l</emphasis> option causes the rule
          number for each Netfilter rule to be displayed.</para>
-
-          <para>The <option>-c</option> option causes the route cache to be
-          dumped in addition to the other routing information.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">enable </emphasis>{
-        <replaceable>interface</replaceable> |
-        <replaceable>provider</replaceable> }</term>
+        <term><emphasis role="bold">enable</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.4.26. Enables the optional provider
@@ -830,8 +674,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">forget </emphasis>[
-        <replaceable>filename</replaceable> ]</term>
+        <term><emphasis role="bold">forget</emphasis></term>

        <listitem>
          <para>Deletes /var/lib/shorewall-lite/<emphasis>filename</emphasis>
@@ -852,8 +695,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">hits </emphasis>
-        [-<option>t</option>]</term>
+        <term><emphasis role="bold">hits</emphasis></term>

        <listitem>
          <para>Generates several reports from Shorewall-lite log messages in
@@ -863,8 +705,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">ipcalc </emphasis>{ address mask |
-        address/vlsm }</term>
+        <term><emphasis role="bold">ipcalc</emphasis></term>

        <listitem>
          <para>Ipcalc displays the network address, broadcast address,
@@ -874,8 +715,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">iprange
-        </emphasis><replaceable>address1</replaceable>-<replaceable>address2</replaceable></term>
+        <term><emphasis role="bold">iprange</emphasis></term>

        <listitem>
          <para>Iprange decomposes the specified range of IP addresses into
@@ -884,8 +724,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">iptrace </emphasis><replaceable>iptables
-        match expression</replaceable></term>
+        <term><emphasis role="bold">iptrace</emphasis></term>

        <listitem>
          <para>This is a low-level debugging command that causes iptables
@@ -904,17 +743,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">list</emphasis></term>
-
-        <listitem>
-          <para><command>list</command> is a synonym for
-          <command>show</command> -- please see below.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">logdrop
-        </emphasis><replaceable>address</replaceable></term>
+        <term><emphasis role="bold">logdrop</emphasis></term>

        <listitem>
          <para>Causes traffic from the listed <emphasis>address</emphasis>es
@@ -925,8 +754,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">logwatch </emphasis>[-<option>m</option>]
-        [<replaceable>refresh-interval</replaceable>]</term>
+        <term><emphasis role="bold">logwatch</emphasis></term>

        <listitem>
          <para>Monitors the log file specified by the LOGFILE option in
@@ -945,8 +773,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">logreject
-        </emphasis><replaceable>address</replaceable></term>
+        <term><emphasis role="bold">logreject</emphasis></term>

        <listitem>
          <para>Causes traffic from the listed <emphasis>address</emphasis>es
@@ -957,17 +784,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">ls</emphasis></term>
-
-        <listitem>
-          <para><command>ls</command> is a synonym for <command>show</command>
-          -- please see below.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">noiptrace </emphasis><replaceable>iptables
-        match expression</replaceable></term>
+        <term><emphasis role="bold">noiptrace</emphasis></term>

        <listitem>
          <para>This is a low-level debugging command that cancels a trace
@@ -980,78 +797,21 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">open</emphasis>
-        <replaceable>source</replaceable> <replaceable>dest</replaceable> [
-        <replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
-        ] ]</term>
+        <term><emphasis role="bold">reset</emphasis></term>

        <listitem>
-          <para>Added in Shorewall 4.6.8. This command requires that the
-          firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in
-          <ulink url="/manpages/shorewall.conf.html">shorewall.conf
-          (5)</ulink>. The effect of the command is to temporarily open the
-          firewall for connections matching the parameters.</para>
-
-          <para>The <replaceable>source</replaceable> and
-          <replaceable>dest</replaceable> parameters may each be specified as
-          <emphasis role="bold">all</emphasis> if you don't wish to restrict
-          the connection source or destination respectively. Otherwise, each
-          must contain a host or network address or a valid DNS name.</para>
-
-          <para>The <replaceable>protocol</replaceable> may be specified
-          either as a number or as a name listed in /etc/protocols. The
-          <replaceable>port</replaceable> may be specified numerically or as a
-          name listed in /etc/services.</para>
-
-          <para>To reverse the effect of a successful <command>open</command>
-          command, use the <command>close</command> command with the same
-          parameters or simply restart the firewall.</para>
-
-          <para>Example: To open the firewall for SSH connections to address
-          192.168.1.1, the command would be:</para>
-
-          <programlisting>    shorewall-lite open all 192.168.1.1 tcp 22</programlisting>
-
-          <para>To reverse that command, use:</para>
-
-          <screen>    shorewall-lite close all 192.168.1.1 tcp 22</screen>
+          <para>All the packet and byte counters in the firewall are
+          reset.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">reenable</emphasis>{
-        <replaceable>interface</replaceable> |
-        <replaceable>provider</replaceable> }</term>
+        <term><emphasis role="bold">restart</emphasis></term>

        <listitem>
-          <para>Added in Shorewall 4.6.9. This is equivalent to a
-          <command>disable</command> command followed by an
-          <command>enable</command> command on the specified
-          <replaceable>interface</replaceable> or
-          <replaceable>provider</replaceable>.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">reject</emphasis><replaceable>
-        address</replaceable></term>
-
-        <listitem>
-          <para>Causes traffic from the listed <emphasis>address</emphasis>es
-          to be silently rejected.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">reload </emphasis>[-n] [-p]
-        [-<option>C</option>]</term>
-
-        <listitem>
-          <para>Added in Shorewall 5.0.0, <emphasis
-          role="bold">reload</emphasis> is similar to <emphasis
-          role="bold">shorewall-lite start</emphasis> except that it assumes
-          that the firewall is already started. Existing connections are
-          maintained.</para>
+          <para>Restart is similar to <emphasis role="bold">shorewall-lite
+          start</emphasis> except that it assumes that the firewall is already
+          started. Existing connections are maintained.</para>

          <para>The <option>-n</option> option causes Shorewall-lite to avoid
          updating the routing table(s).</para>
@@ -1059,56 +819,11 @@
          <para>The <option>-p</option> option causes the connection tracking
          table to be flushed; the <command>conntrack</command> utility must
          be installed to use this option.</para>
-
-          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
-          If the specified (or implicit) firewall script is the one that
-          generated the current running configuration, then the running
-          netfilter configuration will be reloaded as is so as to preserve the
-          iptables packet and byte counters.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">reset [<replaceable>chain</replaceable>,
-        ...]</emphasis><acronym/></term>
-
-        <listitem>
-          <para>Resets the packet and byte counters in the specified
-          <replaceable>chain</replaceable>(s). If no
-          <replaceable>chain</replaceable> is specified, all the packet and
-          byte counters in the firewall are reset.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">restart </emphasis>[-n] [-p]
-        [-<option>C</option>]</term>
-
-        <listitem>
-          <para>Beginning with Shorewall 5.0.0, this command performs a true
-          restart. The firewall is completely stopped as if a
-          <command>stop</command> command had been issued then it is started
-          again.</para>
-
-          <para>The <option>-n</option> option causes Shorewall-lite to avoid
-          updating the routing table(s).</para>
-
-          <para>The <option>-p</option> option causes the connection tracking
-          table to be flushed; the <command>conntrack</command> utility must
-          be installed to use this option.</para>
-
-          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
-          If the specified (or implicit) firewall script is the one that
-          generated the current running configuration, then the running
-          netfilter configuration will be reloaded as is so as to preserve the
-          iptables packet and byte counters.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">restore </emphasis>[-<option>n</option>]
-        [-<option>p</option>] [-<option>C</option>] [
-        <replaceable>filename</replaceable> ]</term>
+        <term><emphasis role="bold">restore</emphasis></term>

        <listitem>
          <para>Restore Shorewall-lite to a state saved using the <emphasis
@@ -1119,34 +834,11 @@
          <emphasis>filename</emphasis> is given then Shorewall-lite will be
          restored from the file specified by the RESTOREFILE option in <ulink
          url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>
-
-          <caution>
-            <para>If your iptables ruleset depends on variables that are
-            detected at run-time, either in your params file or by
-            Shorewall-generated code, <command>restore</command> will use the
-            values that were current when the ruleset was saved, which may be
-            different from the current values.</para>
-          </caution>
-
-          <para>The <option>-n</option> option causes Shorewall to avoid
-          updating the routing table(s).</para>
-
-          <para>The <option>-p</option> option, added in Shorewall 4.6.5,
-          causes the connection tracking table to be flushed; the
-          <command>conntrack</command> utility must be installed to use this
-          option.</para>
-
-          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
-          If the <option>-C</option> option was specified during <emphasis
-          role="bold">shorewall save</emphasis>, then the counters saved by
-          that operation will be restored.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">run
-        </emphasis><replaceable>command</replaceable> [
-        <replaceable>parameter</replaceable> ... ]</term>
+        <term><emphasis role="bold">run</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.6.3. Executes
@@ -1163,8 +855,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">save </emphasis>[-<option>C</option>] [
-        <replaceable>filename</replaceable> ]</term>
+        <term><emphasis role="bold">save</emphasis></term>

        <listitem>
          <para>The dynamic blacklist is stored in
@@ -1174,24 +865,6 @@
          <emphasis>filename</emphasis> is not given then the state is saved
          in the file specified by the RESTOREFILE option in <ulink
          url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>
-
-          <para>The <option>-C</option> option, added in Shorewall 4.6.5,
-          causes the iptables packet and byte counters to be saved along with
-          the chains and rules.</para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term><emphasis role="bold">savesets</emphasis></term>
-
-        <listitem>
-          <para>Added in shorewall 4.6.8. Performs the same action as the
-          <command>stop</command> command with respect to saving ipsets (see
-          the SAVE_IPSETS option in <ulink
-          url="/manpages/shorewall.conf.html">shorewall.conf</ulink> (5)).
-          This command may be used to proactively save your ipset contents in
-          the event that a system failure occurs prior to issuing a
-          <command>stop</command> command.</para>
        </listitem>
      </varlistentry>

@@ -1204,8 +877,7 @@

          <variablelist>
            <varlistentry>
-              <term><emphasis role="bold">bl|blacklists
-              </emphasis>[-<option>x</option>]</term>
+              <term><emphasis role="bold">bl|blacklists</emphasis></term>

              <listitem>
                <para>Added in Shorewall 4.6.2. Displays the dynamic chain
@@ -1218,8 +890,7 @@
            </varlistentry>

            <varlistentry>
-              <term>[-<option>f</option>] <emphasis
-              role="bold">capabilities</emphasis></term>
+              <term><emphasis role="bold">capabilities</emphasis></term>

              <listitem>
                <para>Displays your kernel/iptables capabilities. The
@@ -1230,10 +901,8 @@
            </varlistentry>

            <varlistentry>
-              <term>[-<option>b</option>] [-<option>x</option>]
-              [-<option>l</option>] [-<option>t</option>
-              {<option>filter</option>|<option>mangle</option>|<option>nat</option>|<option>raw</option>|<option>rawpost</option>}]
-              [ <emphasis>chain</emphasis>... ]</term>
+              <term>[ [ <option>chain</option> ] <emphasis>chain</emphasis>...
+              ]</term>

              <listitem>
                <para>The rules in each <emphasis>chain</emphasis> are
@@ -1286,19 +955,11 @@
            </varlistentry>

            <varlistentry>
-              <term><emphasis role="bold">connections
-              [<replaceable>filter_parameter</replaceable>
-              ...]</emphasis></term>
+              <term><emphasis role="bold">connections</emphasis></term>

              <listitem>
                <para>Displays the IP connections currently being tracked by
                the firewall.</para>
-
-                <para>If the <command>conntrack</command> utility is
-                installed, beginning with Shorewall 4.6.11 the set of
-                connections displayed can be limited by including conntrack
-                filter parameters (-p , -s, --dport, etc). See conntrack(8)
-                for details.</para>
              </listitem>
            </varlistentry>

@@ -1340,8 +1001,7 @@
            </varlistentry>

            <varlistentry>
-              <term>[-<option>m</option>] <emphasis
-              role="bold">log</emphasis></term>
+              <term><emphasis role="bold">log</emphasis></term>

              <listitem>
                <para>Displays the last 20 Shorewall-lite messages from the
@@ -1353,20 +1013,6 @@
              </listitem>
            </varlistentry>

-            <varlistentry>
-              <term>[-<option>x</option>] <emphasis
-              role="bold">mangle</emphasis></term>
-
-              <listitem>
-                <para>Displays the Netfilter mangle table using the command
-                <emphasis role="bold">iptables -t mangle -L -n -v</emphasis>.
-                The <emphasis role="bold">-x</emphasis> option is passed
-                directly through to iptables and causes actual packet and byte
-                counts to be displayed. Without this option, those counts are
-                abbreviated.</para>
-              </listitem>
-            </varlistentry>
-
            <varlistentry>
              <term><emphasis role="bold">marks</emphasis></term>

@@ -1390,16 +1036,6 @@
              </listitem>
            </varlistentry>

-            <varlistentry>
-              <term><emphasis role="bold">opens</emphasis></term>
-
-              <listitem>
-                <para>Added in Shorewall 4.5.8. Displays the iptables rules in
-                the 'dynamic' chain created through use of the <command>open
-                </command>command..</para>
-              </listitem>
-            </varlistentry>
-
            <varlistentry>
              <term><emphasis role="bold">policies</emphasis></term>

@@ -1416,9 +1052,7 @@
              <term><emphasis role="bold">routing</emphasis></term>

              <listitem>
-                <para>Displays the system's IPv4 routing configuration. The -c
-                option causes the route cache to be displayed in addition to
-                the other routing information.</para>
+                <para>Displays the system's IPv4 routing configuration.</para>
              </listitem>
            </varlistentry>

@@ -1457,9 +1091,7 @@
      </varlistentry>

      <varlistentry>
-        <term><emphasis role="bold">start</emphasis> [-<option>p</option>]
-        [-<option>n</option>] [<option>-f</option>]
-        [-<option>C</option>]</term>
+        <term><emphasis role="bold">start</emphasis></term>

        <listitem>
          <para>Start Shorewall Lite. Existing connections through
@@ -1470,22 +1102,6 @@
          <para>The <option>-p</option> option causes the connection tracking
          table to be flushed; the <command>conntrack</command> utility must
          be installed to use this option.</para>
-
-          <para>The <option>-n</option> option prevents the firewall script
-          from modifying the current routing configuration.</para>
-
-          <para>The <option>-f</option> option was added in Shorewall 4.6.5.
-          If the RESTOREFILE named in <ulink
-          url="shorewall.conf.html">shorewall.conf</ulink>(5) exists, is
-          executable and is not older than the current filewall script, then
-          that saved configuration is restored.</para>
-
-          <para>The <option>-C</option> option was added in Shorewall 4.6.5
-          and is only meaningful when the <option>-f</option> option is also
-          specified. If the previously-saved configuration is restored, and if
-          the <option>-C</option> option was also specified in the <emphasis
-          role="bold">save</emphasis> command, then the packet and byte
-          counters will be restored.</para>
        </listitem>
      </varlistentry>

--- a/Shorewall-lite/shorecap
+++ b/Shorewall-lite/shorecap
@@ -38,7 +38,7 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
-#        MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
+#        MODULE_SUFFIX - "o gz ko o.gz ko.gz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not
--- a/Shorewall-lite/shorewall-lite.conf
+++ b/Shorewall-lite/shorewall-lite.conf
@@ -1,5 +1,5 @@
 ###############################################################################
-#  /etc/shorewall-lite/shorewall-lite.conf Version 5 - Change the following
+#  /etc/shorewall-lite/shorewall-lite.conf Version 4 - Change the following
 #  variables to override the values in the shorewall.conf file used to
 #  compile /var/lib/shorewall-lite/firewall. Those values may be found in
 #  /var/lib/shorewall-lite/firewall.conf.
--- a/Shorewall-lite/shorewall-lite.service
+++ b/Shorewall-lite/shorewall-lite.service
@@ -5,8 +5,7 @@
 #
 [Unit]
 Description=Shorewall IPv4 firewall (lite)
-Wants=network-online.target
-After=network-online.target
+After=network.target
 Conflicts=iptables.service firewalld.service

 [Service]
@@ -14,7 +13,7 @@ Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-lite
 StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
+ExecStart=/sbin/shorewall-lite $OPTIONS start
 ExecStop=/sbin/shorewall-lite $OPTIONS stop

 [Install]
--- a/Shorewall-lite/shorewall-lite.service.debian
+++ b/Shorewall-lite/shorewall-lite.service.debian
@@ -1,23 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
-#
-[Unit]
-Description=Shorewall IPv4 firewall (lite)
-Wants=network-online.target
-After=network-online.target
-Conflicts=iptables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/default/shorewall-lite
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall-lite $OPTIONS stop
-ExecReload=/sbin/shorewall-lite $OPTIONS reload $RELOADOPTIONS
-
-[Install]
-WantedBy=basic.target
--- a/Shorewall-lite/sysconfig
+++ b/Shorewall-lite/sysconfig
@@ -1,26 +0,0 @@
-#
-# Global start/restart/reload/stop options
-#
-OPTIONS=""
-
-#
-# Start options
-#
-STARTOPTIONS=""
-
-#
-# Restart options
-#
-RESTARTOPTIONS=""
-
-#
-# Reload options
-#
-RELOADOPTIONS=""
-
-#
-# Stop options
-#
-STOPOPTIONS=""
-
-# EOF
--- a/Shorewall-lite/uninstall.sh
+++ b/Shorewall-lite/uninstall.sh
@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.sourceforge.net
 #
@@ -28,7 +28,6 @@

 VERSION=xxx  #The Build script inserts the actual version
 PRODUCT=shorewall-lite
-Product="Shorewall Lite"

 usage() # $1 = exit status
 {
@@ -41,12 +40,6 @@ usage() # $1 = exit status
    exit $1
 }

-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
 qt()
 {
    "$@" >/dev/null 2>&1
@@ -169,15 +162,7 @@ if [ $configure -eq 1 ]; then
 fi

 if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
-    if [ $HOST = openwrt ]; then
-	if [ $configure -eq 1 ] && /etc/init.d/shorewall-lite enabled; then
-	    /etc/init.d/shorewall-lite disable
-	fi
-	
-	FIREWALL=$(readlink ${SHAREDIR}/shorewall-lite/init)
-    else
-	FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
-    fi
+    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
 elif [ -n "$INITFILE" ]; then
    FIREWALL=${INITDIR}/${INITFILE}
 fi
@@ -196,26 +181,21 @@ if [ -f "$FIREWALL" ]; then
    remove_file $FIREWALL
 fi

-[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
-
-if [ -n "$SERVICEDIR" ]; then
+if [ -n "$SYSTEMD" ]; then
    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
-    rm -f $SERVICEDIR/shorewall-lite.service
+    rm -f $SYSTEMD/shorewall-lite.service
 fi

 rm -f ${SBINDIR}/shorewall-lite

 rm -rf ${CONFDIR}/shorewall-lite
-rm -rf ${VARDIR}
+rm -rf ${VARDIR}/shorewall-lite
 rm -rf ${SHAREDIR}/shorewall-lite
 rm -rf ${LIBEXECDIR}/shorewall-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
-rm -f  ${SYSCONFDIR}/shorewall-lite

-if [ -n "${MANDIR}" ]; then
-    rm -f ${MANDIR}/man5/shorewall-lite*
-    rm -f ${MANDIR}/man8/shorewall-lite*
-fi
+rm -f ${MANDIR}/man5/shorewall-lite*
+rm -f ${MANDIR}/man8/shorewall-lite*

 echo "Shorewall Lite Uninstalled"

--- a/Shorewall/INSTALL
+++ b/Shorewall/INSTALL
@@ -1,4 +1,4 @@
-Shoreline Firewall (Shorewall) Version 5
+Shoreline Firewall (Shorewall) Version 4
 -----         ----

 -----------------------------------------------------------------------------
--- a/Shorewall/Macros/macro.AMQP
+++ b/Shorewall/Macros/macro.AMQP
@@ -1,10 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.AMQP
+# Shorewall version 4 - AMQP Macro
 #
-# This macro handles AMQP traffic.
+# /usr/share/shorewall/macro.AMQP
+#
+#	This macro handles AMQP traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5672
 PARAM	-	-	udp	5672
--- a/Shorewall/Macros/macro.A_AllowICMPs
+++ b/Shorewall/Macros/macro.A_AllowICMPs
@@ -1,10 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.A_AllowICMPs
+# Shorewall version 4 - Audited AllowICMPs Macro
 #
-# This macro audits and accepts needed ICMP types.
+# /usr/share/shorewall/macro.A_AllowICMPs
+#
+#	This macro A_ACCEPTs needed ICMP types
 #
 ###############################################################################
-#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE
+?FORMAT 2
+###############################################################################
+#ACTION		SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#					PORT(S)	PORT(S)	DEST	LIMIT	GROUP

 ?COMMENT Needed ICMP types

--- a/Shorewall/Macros/macro.A_DropDNSrep
+++ b/Shorewall/Macros/macro.A_DropDNSrep
@@ -1,10 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.A_DropDNSrep
+# Shorewall version 4 - Audited DropDNSrep Macro
 #
-# This macro audits and drops DNS UDP replies.
+# /usr/share/shorewall/macro.A_DropDNSrep
+#
+#	This macro silently audites and drops DNS UDP replies
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP

 ?COMMENT Late DNS Replies

--- a/Shorewall/Macros/macro.A_DropUPnP
+++ b/Shorewall/Macros/macro.A_DropUPnP
@@ -1,10 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.A_DropUPnP
+# Shorewall version 4 - ADropUPnP Macro
 #
-# This macro audits and drops UPnP probes on UDP port 1900.
+# /usr/share/shorewall/macro.A_DropUPnP
+#
+#	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP

 ?COMMENT UPnP

--- a/Shorewall/Macros/macro.ActiveDir
+++ b/Shorewall/Macros/macro.ActiveDir
@@ -1,13 +1,16 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.ActiveDir
+# Shorewall version 4 - Samba 4 Macro
 #
-# This macro handles ports for Samba 4 Active Directory Service.
-# You can copy this file to /etc/shorewall[6]/ and comment out the ports you
-# do not want open.
+# /usr/share/shorewall/macro.ActiveDir
 #
+#       This macro handles ports for Samba 4 Active Directory Service
+#
+# You can comment out the ports you do not want open
+#
+# 
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+#ACTION SOURCE  DEST    PROTO   DEST    SOURCE  RATE    USER/
+#                               PORT(S) PORT(S) LIMIT   GROUP
 PARAM   -       -       tcp     389 	#LDAP services
 PARAM   -       -       udp	389  
 PARAM   -       -       tcp     636	#LDAP SSL
--- a/Shorewall/Macros/macro.AllowICMPs
+++ b/Shorewall/Macros/macro.AllowICMPs
@@ -1,10 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.AllowICMPs
+# Shorewall version 4 - AllowICMPs Macro
 #
-# This macro ACCEPTs needed ICMP types.
+# /usr/share/shorewall/macro.AllowICMPs
+#
+#	This macro ACCEPTs needed ICMP types
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP

 ?COMMENT Needed ICMP types

--- a/Shorewall/Macros/macro.Amanda
+++ b/Shorewall/Macros/macro.Amanda
@@ -1,12 +1,17 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Amanda
+# Shorewall version 4 - Amanda Macro
 #
-# This macro handles connections required by the AMANDA backup system
-# to back up remote nodes.  It does not provide the ability to restore
-# files from those nodes.
+# /usr/share/shorewall/macro.Amanda
+#
+#	This macro handles connections required by the AMANDA backup system
+#	to back up remote nodes.  It does not provide the ability to restore
+#	files from those nodes.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP

 ?if ( __CT_TARGET && ! $AUTOHELPERS && __AMANDA_HELPER )
 PARAM	-	-	udp	10080 { helper=amanda }
--- a/Shorewall/Macros/macro.Auth
+++ b/Shorewall/Macros/macro.Auth
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Auth
+# Shorewall version 4 - Auth Macro
 #
-# This macro handles Auth (identd) traffic.
+# /usr/share/shorewall/macro.Auth
+#
+#	This macro handles Auth (identd) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	113
--- a/Shorewall/Macros/macro.BGP
+++ b/Shorewall/Macros/macro.BGP
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.BGP
+# Shorewall version 4 - BGP Macro
 #
-# This macro handles BGP4 traffic.
+# /usr/share/shorewall/macro.BGP
+#
+#	This macro handles BGP4 traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	179	# BGP4
--- a/Shorewall/Macros/macro.BLACKLIST
+++ b/Shorewall/Macros/macro.BLACKLIST
@@ -1,11 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.blacklist
+# Shorewall version 4 - blacklist Macro
 #
-# This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL.
+# /usr/share/shorewall/macro.blacklist
+#
+#	This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if $BLACKLIST_LOGLEVEL
 blacklog
 ?else
--- a/Shorewall/Macros/macro.BitTorrent
+++ b/Shorewall/Macros/macro.BitTorrent
@@ -1,16 +1,21 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.BitTorrent
+# Shorewall version 4 - BitTorrent Macro
 #
-# This macro handles BitTorrent traffic for BitTorrent 3.1 and earlier.
+# /usr/share/shorewall/macro.BitTorrent
 #
-# If you are running BitTorrent 3.2 or later, you should use the
-# BitTorrent32 macro.
+#	This macro handles BitTorrent traffic for BitTorrent 3.1 and earlier.
+#
+#	If you are running BitTorrent 3.2 or later, you should use the
+#	BitTorrent32 macro.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6889
 #
 # It may also be necessary to allow UDP traffic:
 #
 PARAM	-	-	udp	6881
+#
--- a/Shorewall/Macros/macro.BitTorrent32
+++ b/Shorewall/Macros/macro.BitTorrent32
@@ -1,13 +1,18 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.BitTorrent32
+# Shorewall version 4 - BitTorrent 3.2 Macro
 #
-# This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
+# /usr/share/shorewall/macro.BitTorrent32
+#
+#	This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6999
 #
 # It may also be necessary to allow UDP traffic:
 #
 PARAM	-	-	udp	6881
+#
--- a/Shorewall/Macros/macro.CVS
+++ b/Shorewall/Macros/macro.CVS
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.CVS
+# Shorewall version 4 - CVS Macro
 #
-# This macro handles connections to the CVS pserver.
+# /usr/share/shorewall/macro.CVS
+#
+#	This macro handles connections to the CVS pserver.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2401
--- a/Shorewall/Macros/macro.Citrix
+++ b/Shorewall/Macros/macro.Citrix
@@ -1,12 +1,16 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Citrix
+# Shorewall version 4 - Citrix/ICA Macro
 #
-# This macro handles Citrix/ICA traffic (ICA, ICA Browser, CGP a.k.a.
-# ICA Session Reliability)
+# /usr/share/shorewall/macro.Citrix
+#
+#	This macro handles Citrix/ICA traffic (ICA, ICA Browser, CGP a.k.a.
+#	ICA Session Reliability)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1494	# ICA
 PARAM	-	-	udp	1604	# ICA Browser
 PARAM	-	-	tcp	2598	# CGP Session Reliabilty
--- a/Shorewall/Macros/macro.DAAP
+++ b/Shorewall/Macros/macro.DAAP
@@ -1,11 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DAAP
+# Shorewall version 4 - DAAP Macro
 #
-# This macro handles DAAP (Digital Audio Access Protocol) traffic.
-# The protocol is used by iTunes, Rythmbox and other similar daemons.
+# /usr/share/shorewall/macro.DAAP
+#
+#	This macro handles DAAP (Digital Audio Access Protocol) traffic.
+#	The protocol is used by iTunes, Rythmbox and other similar daemons.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3689
 PARAM	-	-	udp	3689
--- a/Shorewall/Macros/macro.DCC
+++ b/Shorewall/Macros/macro.DCC
@@ -1,10 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DCC
+# Shorewall version 4 - DCC Macro
 #
-# This macro handles DCC (Distributed Checksum Clearinghouse) traffic.
-# DCC is a distributed spam filtering mechanism.
+# /usr/share/shorewall/macro.DCC
+#
+#	This macro handles DCC (Distributed Checksum Clearinghouse) traffic.
+#	DCC is a distributed spam filtering mechanism.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	6277
--- a/Shorewall/Macros/macro.DHCPfwd
+++ b/Shorewall/Macros/macro.DHCPfwd
@@ -1,10 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DHCPfwd
+# Shorewall version 4 - DHCPfwd Macro
 #
-# This macro (bidirectional) handles forwarded DHCP traffic
+# /usr/share/shorewall/macro.DHCPfwd
+#
+#	This macro (bidirectional) handles forwarded DHCP traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	67:68	67:68	# DHCP
 PARAM	DEST	SOURCE	udp	67:68	67:68	# DHCP
--- a/Shorewall/Macros/macro.DNS
+++ b/Shorewall/Macros/macro.DNS
@@ -1,10 +1,14 @@
 #
-# Shorewall --  /usr/share/shorewall/macro.DNS
+# Shorewall version 4 - DNS Macro
 #
-# This macro handles DNS traffic.
+# /usr/share/shorewall/macro.DNS
+#
+#	This macro handles DNS traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	53
 PARAM	-	-	tcp	53
--- a/Shorewall/Macros/macro.Distcc
+++ b/Shorewall/Macros/macro.Distcc
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Distcc
+# Shorewall version 4 - Distcc Macro
 #
-# This macro handles connections to the Distributed Compiler service.
+# /usr/share/shorewall/macro.Distcc
+#
+#	This macro handles connections to the Distributed Compiler service.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3632
--- a/Shorewall/Macros/macro.Drop
+++ b/Shorewall/Macros/macro.Drop
@@ -1,15 +1,20 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Drop
+# Shorewall version 4 - Drop Macro
 #
-# This macro generates the same rules as the Drop default action
-# It is used in place of action.Drop when USE_ACTIONS=No.
+# /usr/share/shorewall/macro.Drop
 #
-# Example:
+#	This macro generates the same rules as the Drop default action
+#	It is used in place of action.Drop when USE_ACTIONS=No.
 #
-#	Drop	net	all
+#	Example:
+#
+#		Drop	net	all
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 #
 # Don't log 'auth' DROP
 #
--- a/Shorewall/Macros/macro.DropDNSrep
+++ b/Shorewall/Macros/macro.DropDNSrep
@@ -1,10 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DropDNSrep
+# Shorewall version 4 - DropDNSrep Macro
 #
-# This macro silently drops DNS UDP replies
+# /usr/share/shorewall/macro.DropDNSrep
+#
+#	This macro silently drops DNS UDP replies
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP

 ?COMMENT Late DNS Replies

--- a/Shorewall/Macros/macro.DropUPnP
+++ b/Shorewall/Macros/macro.DropUPnP
@@ -1,10 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DropUPnP
+# Shorewall version 4 - DropUPnP Macro
 #
-# This macro silently drops UPnP probes on UDP port 1900
+# /usr/share/shorewall/macro.DropUPnP
+#
+#	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP

 ?COMMENT UPnP

--- a/Shorewall/Macros/macro.Edonkey
+++ b/Shorewall/Macros/macro.Edonkey
@@ -1,31 +1,36 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Edonkey
+# Shorewall version 4 - Edonkey Macro
 #
-# This macro handles Edonkey traffic.
+# /usr/share/shorewall/macro.Edonkey
 #
-# http://www.portforward.com/english/routers/port_forwarding/2wire/1000s/eDonkey.htm
-# says to use udp 5737 rather than 4665.
+#	This macro handles Edonkey traffic.
 #
-# http://www.amule.org/wiki/index.php/FAQ_ed2k says this:
 #
-# 4661 TCP (outgoing) Port, on which a server listens for connection
-# (defined by server).
+#	http://www.portforward.com/english/routers/port_forwarding/2wire/1000s/eDonkey.htm
+#	says to use udp 5737 rather than 4665.
 #
-# 4665 UDP (outgoing) used for global server searches and global source
-# queries. This is always Server TCP port (in this case 4661) + 4.
+#	http://www.amule.org/wiki/index.php/FAQ_ed2k says this:
 #
-# 4662 TCP (outgoing and incoming) Client to client transfers.
+#	4661 TCP (outgoing) Port, on which a server listens for connection
+#	(defined by server).
 #
-# 4672 UDP (outgoing and incoming) Extended eMule protocol, Queue
-# Rating, File Reask Ping
+#	4665 UDP (outgoing) used for global server searches and global source
+#	queries. This is always Server TCP port (in this case 4661) + 4.
 #
-# 4711 TCP WebServer listening port.
+#	4662 TCP (outgoing and incoming) Client to client transfers.
 #
-# 4712 TCP External Connection port. Used to communicate aMule with other
-# applications such as aMule WebServer or aMuleCMD.
+#	4672 UDP (outgoing and incoming) Extended eMule protocol, Queue
+#	Rating, File Reask Ping
+#
+#	4711 TCP WebServer listening port.
+#
+#	4712 TCP External Connection port. Used to communicate aMule with other
+#	applications such as aMule WebServer or aMuleCMD.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	4662
 PARAM	-	-	udp	4665
--- a/Shorewall/Macros/macro.FTP
+++ b/Shorewall/Macros/macro.FTP
@@ -1,11 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.FTP
+# Shorewall version 4 - FTP Macro
 #
-# This macro handles FTP traffic.
+# /usr/share/shorewall/macro.FTP
+#
+#	This macro handles FTP traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __FTP_HELPER  )
 PARAM	-	-	tcp	21 { helper=ftp }
 ?else
--- a/Shorewall/Macros/macro.Finger
+++ b/Shorewall/Macros/macro.Finger
@@ -1,10 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Finger
+# Shorewall version 4 - Finger Macro
 #
-# This macro handles Finger protocol.
-# You should not generally open your finger information to internet.
+# /usr/share/shorewall/macro.Finger
+#
+#	This macro handles Finger protocol. You should not generally open
+#	your finger information to internet.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	79
--- a/Shorewall/Macros/macro.GNUnet
+++ b/Shorewall/Macros/macro.GNUnet
@@ -1,11 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.GNUnet
+# Shorewall version 4 - GNUnet Macro
 #
-# This macro handles GNUnet (secure peer-to-peer networking) traffic.
+# /usr/share/shorewall/macro.GNUnet
+#
+#	This macro handles GNUnet (secure peer-to-peer networking) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2086
 PARAM	-	-	udp	2086
 PARAM	-	-	tcp	1080
--- a/Shorewall/Macros/macro.GRE
+++ b/Shorewall/Macros/macro.GRE
@@ -1,10 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.GRE
+# Shorewall version 4 - GRE Macro
 #
-# This macro (bidirectional) handles Generic Routing Encapsulation (GRE).
+# /usr/share/shorewall/macro.GRE
+#
+#	This macro (bi-directional) handles Generic Routing Encapsulation
+#	traffic (RFC 1701)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	47	# GRE
 PARAM	DEST	SOURCE	47	# GRE
--- a/Shorewall/Macros/macro.Git
+++ b/Shorewall/Macros/macro.Git
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Git
+# Shorewall version 4 - Git Macro
 #
-# This macro handles Git traffic.
+# /usr/share/shorewall/macro.Git
+#
+#	This macro handles Git traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9418
--- a/Shorewall/Macros/macro.Gnutella
+++ b/Shorewall/Macros/macro.Gnutella
@@ -1,10 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Gnutella
+# Shorewall version 4 - Gnutella Macro
 #
-# This macro handles Gnutella traffic.
+# /usr/share/shorewall/macro.Gnutella
+#
+#	This macro handles Gnutella traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6346
 PARAM	-	-	udp	6346
--- a/Shorewall/Macros/macro.Goto-Meeting
+++ b/Shorewall/Macros/macro.Goto-Meeting
@@ -1,11 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Goto-Meeting
+# Shorewall version 4 - Citrix/Goto Meeting macro
 #
-# This macro handles Citrix/Goto Meeting.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM      -    -       tcp     8200    # Goto Meeting only needed outbound
-HTTP
-HTTPS
+# /usr/share/shorewall/macro.Goto-Meeting
+#          by Eric Teeter
+#       This macro handles Citrix/Goto Meeting
+#       Assumes that ports 80 and 443 are already open
+#       If needed, use the macros that open Http and Https to reduce redundancy
+####################################################################################
+#ACTION	   SOURCE	DEST    PROTO   DEST    SOURCE  RATE    USER/
+#                                       PORT(S) PORT(S) LIMIT   GROUP
+PARAM      -         	-       tcp     8200    # Goto Meeting only needed (TCP outbound)
--- a/Shorewall/Macros/macro.HKP
+++ b/Shorewall/Macros/macro.HKP
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.HKP
+# Shorewall version 4 - HKP Macro
 #
-# This macro handles OpenPGP HTTP keyserver protocol traffic.
+# /usr/share/shorewall/macro.HKP
+#
+#	This macro handles OpenPGP HTTP keyserver protocol traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	11371
--- a/Shorewall/Macros/macro.HTTP
+++ b/Shorewall/Macros/macro.HTTP
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.HTTP
+# Shorewall version 4 - HTTP Macro
 #
-# This macro handles plaintext HTTP (WWW) traffic.
+# /usr/share/shorewall/macro.HTTP
+#
+#	This macro handles plaintext HTTP (WWW) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	80
--- a/Shorewall/Macros/macro.HTTPS
+++ b/Shorewall/Macros/macro.HTTPS
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.HTTPS
+# Shorewall version 4 - HTTPS Macro
 #
-# This macro handles HTTPS (WWW over TLS) traffic.
+# /usr/share/shorewall/macro.HTTPS
+#
+#	This macro handles HTTPS (WWW over SSL) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	443
--- a/Shorewall/Macros/macro.ICPV2
+++ b/Shorewall/Macros/macro.ICPV2
@@ -1,9 +1,13 @@
 #
-# Shorewall - /usr/share/shorewall/macro.ICPV2
+# Shorewall version 4 - ICPV2 Macro
 #
-# This macro handles Internet Cache Protocol V2 (Squid) traffic.
+# /usr/share/shorewall/macro.ICPV2
+#
+#	This macro handles Internet Cache Protocol V2 (Squid) traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	3130
--- a/Shorewall/Macros/macro.ICQ
+++ b/Shorewall/Macros/macro.ICQ
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.ICQ
+# Shorewall version 4 - ICQ Macro
 #
-# This macro handles ICQ, now called AOL Instant Messenger (or AIM).
+# /usr/share/shorewall/macro.ICQ
+#
+#	This macro handles ICQ, now called AOL Instant Messenger (or AIM).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5190
--- a/Shorewall/Macros/macro.ILO
+++ b/Shorewall/Macros/macro.ILO
@@ -1,13 +1,17 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.ILO
+# Shorewall version 4 - ILO Macro
 #
-# This macro handles console redirection with HP ILO 2+,
-# Use this macro to open access to your ILO interface from management
-# workstations.
+# /usr/share/shorewall/macro.ILO
+#
+#	This macro handles console redirection with HP ILO 2+,
+#	Use this macro to open access to your ILO interface from management
+#	workstations.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3002		# Raw serial data
 PARAM	-	-	tcp	9300		# Shared Remote Console
 PARAM	-	-	tcp	17988		# Virtual Media
--- a/Shorewall/Macros/macro.IMAP
+++ b/Shorewall/Macros/macro.IMAP
@@ -1,10 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IMAP
+# Shorewall version 4 - IMAP Macro
 #
-# This macro handles plaintext and STARTTLS IMAP traffic.
-# For SSL (TLS) IMAP, see macro.IMAPS.
+# /usr/share/shorewall/macro.IMAP
+#
+#	This macro handles plaintext IMAP traffic.  For encrypted IMAP,
+#	see macro.IMAPS.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	143
--- a/Shorewall/Macros/macro.IMAPS
+++ b/Shorewall/Macros/macro.IMAPS
@@ -1,11 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IMAPS
+# Shorewall version 4 - IMAPS Macro
 #
-# This macro handles SSL (TLS) IMAP traffic.
-# For plaintext (not recommended) and STARTLS (recommended) IMAP see
-# macro.IMAP.
+# /usr/share/shorewall/macro.IMAPS
+#
+#	This macro handles encrypted IMAP traffic.  For plaintext IMAP
+#	(not recommended), see macro.IMAP.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	993
--- a/Shorewall/Macros/macro.IPIP
+++ b/Shorewall/Macros/macro.IPIP
@@ -1,10 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPIP
+# Shorewall version 4 - IPIP Macro
 #
-# This macro (bidirectional) handles IPIP capsulation traffic
+# /usr/share/shorewall/macro.IPIP
+#
+#	This macro (bidirectional) handles IPIP capsulation traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	94	# IPIP
 PARAM	DEST	SOURCE	94	# IPIP
--- a/Shorewall/Macros/macro.IPMI
+++ b/Shorewall/Macros/macro.IPMI
@@ -1,15 +1,18 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPMI
+# Shorewall version 4 - IPMI Macro
 #
-# This macro handles IPMI console redirection with RMCP protocol.
-# Tested to work with with Asus (AMI),
-# Dell DRAC5+ (Avocent), and Supermicro (Aten or AMI).
-# Use this macro to open access to your IPMI interface from management
-# workstations.
+# /usr/share/shorewall/macro.IPMI
+#
+#	This macro handles IPMI console redirection with Asus (AMI),
+#	Dell DRAC5+ (Avocent), and Supermicro (Aten or AMI).
+#	Use this macro to open access to your IPMI interface from management
+#	workstations.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	623		# RMCP
 PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
 PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)
--- a/Shorewall/Macros/macro.IPP
+++ b/Shorewall/Macros/macro.IPP
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPP
+# Shorewall version 3.2 - IPP Macro
 #
-# This macro handles Internet Printing Protocol (IPP).
+# /usr/share/shorewall/macro.IPP
+#
+#	This macro handles Internet Printing Protocol (IPP).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	631
--- a/Shorewall/Macros/macro.IPPbrd
+++ b/Shorewall/Macros/macro.IPPbrd
@@ -1,11 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPPbrd
+# Shorewall version 4 - IPP Broadcast Macro
 #
-# This macro handles Internet Printing Protocol (IPP) broadcasts.
-# If you also need to handle TCP 631 connections in the opposite
-# direction, use the IPPserver Macro
+# /usr/share/shorewall/macro.IPPbrd
+#
+#	This macro handles Internet Printing Protocol (IPP) broadcasts.
+#       If you also need to handle TCP 631 connections in the opposite
+#       direction, use the IPPserver Macro
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	631
--- a/Shorewall/Macros/macro.IPPserver
+++ b/Shorewall/Macros/macro.IPPserver
@@ -1,28 +1,31 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPPserver
+# Shorewall version 4 - IPPserver Macro
 #
-# This macro handles Internet Printing Protocol (IPP), indicating
-# that DEST is a printing server for SOURCE.  The macro allows
-# print queue broadcasts from the server to the client, and
-# printing connections from the client to the server.
+# /usr/share/shorewall/macro.IPPserver
 #
-# Example usage on a single-interface firewall which is a print client:
+#	This macro handles Internet Printing Protocol (IPP), indicating
+#	that DEST is a printing server for SOURCE.  The macro allows
+#	print queue broadcasts from the server to the client, and
+#	printing connections from the client to the server.
 #
-#	IPPserver(ACCEPT)	$FW	net
+#	Example usage on a single-interface firewall which is a print
+#	client:
+#		IPPserver/ACCEPT $FW net
 #
-# Example for a two-interface firewall which acts as a print server for loc:
+#	Example for a two-interface firewall which acts as a print
+#	server for loc:
+#		IPPserver/ACCEPT loc $FW
 #
-#	IPPserver(ACCEPT)	loc	$FW
-#
-# NOTE: If you want both to serve requests for local printers and listen to
-# requests for remote printers (i.e. your CUPS server is also a client),
-# you need to apply the rule twice, e.g.
-#
-#	IPPserver(ACCEPT)	loc	$FW
-#	IPPserver(ACCEPT)	$FW	loc
+#	NOTE: If you want both to serve requests for local printers and
+#	listen to requests for remote printers (i.e. your CUPS server is
+#	also a client), you need to apply the rule twice, e.g.
+#		IPPserver/ACCEPT loc $FW
+#		IPPserver/ACCEPT $FW loc
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	SOURCE	DEST	tcp	631
 PARAM	DEST	SOURCE	udp	631
--- a/Shorewall/Macros/macro.IPsec
+++ b/Shorewall/Macros/macro.IPsec
@@ -1,11 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPsec
+# Shorewall version 4 - IPsec Macro
 #
-# This macro (bidirectional) handles IPsec traffic
+# /usr/share/shorewall/macro.IPsec
+#
+#	This macro (bidirectional) handles IPsec traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	50			# ESP
 PARAM	DEST	SOURCE	udp	500	500	# IKE
--- a/Shorewall/Macros/macro.IPsecah
+++ b/Shorewall/Macros/macro.IPsecah
@@ -1,12 +1,16 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPsecah
+# Shorewall version 4 - IPsecah Macro
 #
-# This macro (bidirectional) handles IPsec authentication (AH) traffic.
-# This is insecure. You should use ESP with encryption for security.
+# /usr/share/shorewall/macro.IPsecah
+#
+#	This macro (bidirectional) handles IPsec authentication (AH) traffic.
+#       This is insecure. You should use ESP with encryption for security.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	51			# AH
 PARAM	DEST	SOURCE	udp	500	500	# IKE
--- a/Shorewall/Macros/macro.IPsecnat
+++ b/Shorewall/Macros/macro.IPsecnat
@@ -1,11 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPsecnat
+# Shorewall version 4 - IPsecnat Macro
 #
-# This macro (bidirectional) handles IPsec traffic and Nat-Traversal
+# /usr/share/shorewall/macro.IPsecnat
+#
+#	This macro (bidirectional) handles IPsec traffic and Nat-Traversal
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	# IKE
 PARAM	-	-	udp	4500	# NAT-T
 PARAM	-	-	50		# ESP
--- a/Shorewall/Macros/macro.IRC
+++ b/Shorewall/Macros/macro.IRC
@@ -1,10 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IRC
+# Shorewall version 4 IRC Macro
 #
-# This macro handles IRC traffic (Internet Relay Chat).
+# /usr/share/shorewall/macro.IRC
+#
+#	This macro handles IRC traffic (Internet Relay Chat).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP

 ?if ( __CT_TARGET && ! $AUTOHELPERS && __IRC_HELPER  )
 PARAM	-	-	tcp	6667 { helper=irc }
--- a/Shorewall/Macros/macro.JAP
+++ b/Shorewall/Macros/macro.JAP
@@ -1,14 +1,19 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.JAP
+# Shorewall version 4 - JAP Macro
 #
-# This macro handles JAP Anon Proxy Mix server traffic.
-# It is NOT for people trying to browse anonymously!
+# /usr/share/shorewall/macro.JAP
+#
+#	This macro handles JAP Anon Proxy traffic.  This macro is for
+#	administrators running a Mix server.  It is NOT for people trying
+#	to browse anonymously!
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	8080 # HTTP port
 PARAM	-	-	tcp	6544 # HTTP port
 PARAM	-	-	tcp	6543 # InfoService port
-HTTPS
-SSH
+HTTPS(PARAM)
+SSH(PARAM)
--- a/Shorewall/Macros/macro.Jabber
+++ b/Shorewall/Macros/macro.Jabber
@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.Jabber
-#
-# This macro handles Jabber traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	tcp	5222
--- a/Shorewall/Macros/macro.JabberPlain
+++ b/Shorewall/Macros/macro.JabberPlain
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.JabberPlain
+# Shorewall version 3.4 - JabberPlain Macro
 #
-# This macro is deprecated - use of macro.Jabber instead is recommended.
+# /usr/share/shorewall/macro.JabberPlain
+#
+#	This macro accepts Jabber traffic (plaintext).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-Jabber
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM	-	-	tcp	5222
--- a/Shorewall/Macros/macro.JabberSecure
+++ b/Shorewall/Macros/macro.JabberSecure
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.JabberSecure
+# Shorewall version 3.4 - JabberSecure (ssl) Macro
 #
-# This macro handles deprecated Jabber (SSL) traffic. Use STARTTLS instead.
+# /usr/share/shorewall/macro.JabberSecure
+#
+#	This macro accepts Jabber traffic (ssl).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5223
--- a/Shorewall/Macros/macro.Jabberd
+++ b/Shorewall/Macros/macro.Jabberd
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Jabberd
+# Shorewall version 3.4 - Jabberd (server intercommunication)
 #
-# This macro handles Jabberd intercommunication traffic
+# /usr/share/shorewall/macro.Jabberd
+#
+#	This macro accepts Jabberd intercommunication traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5269
--- a/Shorewall/Macros/macro.Jetdirect
+++ b/Shorewall/Macros/macro.Jetdirect
@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Jetdirect
+# Shorewall version 3.2 - Jetdirect Macro
 #
-# This macro handles HP Jetdirect printing.
+# /usr/share/shorewall/macro.Jetdirect
+#
+#	This macro handles HP Jetdirect printing.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9100
--- a/Shorewall/Macros/macro.Kerberos
+++ b/Shorewall/Macros/macro.Kerberos
@@ -1,10 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Kerberos
+# Shorewall version 4 - Kerberos Macro
 #
-# This macro handles Kerberos traffic.
+# /usr/share/shorewall/macro.Kerberos
+#
+#	This macro handles Kerberos traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	88
 PARAM	-	-	udp	88
--- a/Shorewall/Macros/macro.L2TP
+++ b/Shorewall/Macros/macro.L2TP
@@ -1,11 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.L2TP
+# Shorewall version 4 - L2TP Macro
 #
-# This macro (bidirectional) handles Layer 2 Tunneling Protocol traffic.
-# (RFC 2661)
+# /usr/share/shorewall/macro.L2TP
+#
+#	This macro (bidirectional) handles Layer 2 Tunneling Protocol traffic
+#	(RFC 2661)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	1701	# L2TP
 PARAM	DEST	SOURCE	udp	1701	# L2TP
--- a/Shorewall/Macros/macro.LDAP
+++ b/Shorewall/Macros/macro.LDAP
@@ -1,14 +1,18 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.LDAP
+# Shorewall version 4 - LDAP Macro
 #
-# This macro handles plaintext LDAP traffic. For encrypted LDAP
-# traffic, see macro.LDAPS.  Use of LDAPS is recommended (and is
-# required by some directory services) if you want to do user
-# authentication over LDAP.  Note that some LDAP implementations
-# support initiating TLS connections via the plaintext LDAP port.
-# Consult your LDAP server documentation for details.
+# /usr/share/shorewall/macro.LDAP
+#
+#	This macro handles plaintext LDAP traffic.  For encrypted LDAP
+#	traffic, see macro.LDAPS.  Use of LDAPS is recommended (and is
+#	required by some directory services) if you want to do user
+#	authentication over LDAP.  Note that some LDAP implementations
+#	support initiating TLS connections via the plaintext LDAP port.
+#	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	389
--- a/Shorewall/Macros/macro.LDAPS
+++ b/Shorewall/Macros/macro.LDAPS
@@ -1,14 +1,18 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.LDAPS
+# Shorewall version 4 - LDAPS Macro
 #
-# This macro handles encrypted LDAP traffic.  For plaintext LDAP
-# traffic, see macro.LDAP.  Use of LDAPS is recommended (and is
-# required by some directory services) if you want to do user
-# authentication over LDAP.  Note that some LDAP implementations
-# support initiating TLS connections via the plaintext LDAP port.
-# Consult your LDAP server documentation for details.
+# /usr/share/shorewall/macro.LDAPS
+#
+#	This macro handles encrypted LDAP traffic.  For plaintext LDAP
+#	traffic, see macro.LDAP.  Use of LDAPS is recommended (and is
+#	required by some directory services) if you want to do user
+#	authentication over LDAP.  Note that some LDAP implementations
+#	support initiating TLS connections via the plaintext LDAP port.
+#	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
+?FORMAT 2
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	636
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Tom Eastep	8e761c2111	Remove debugging code from Shorewall-init installer Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-19 08:16:02 -07:00
Tom Eastep	cc44880467	Load xt_LOG in both helpers files Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-19 07:44:01 -07:00
Tom Eastep	b5b0785440	Correct IPv4 Helpers file - Change xt_ULOG to ipt_ULOG Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-18 08:01:51 -07:00
Tom Eastep	299fd15984	Correct Shorewall6 helpers file Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-17 08:05:47 -07:00
Tom Eastep	a67debafb3	Revert "Correct last patch" This reverts commit `b528625329`.	2014-10-16 07:45:20 -07:00
Tom Eastep	b528625329	Correct last patch Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-16 07:44:09 -07:00
Tom Eastep	49d1c64c00	ipt_LOG in helpers file Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-15 18:06:15 -07:00
Tom Eastep	f4e36a9ecf	Remove 'optional' from the Universal interfaces file Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-11 07:34:44 -07:00
Tom Eastep	74c4980c91	Merge branch '4.6.4' of ssh://git.code.sf.net/p/shorewall/code into 4.6.4	2014-10-10 16:00:34 -07:00
Tom Eastep	56afdb6419	Avoid confusing output when 4.6.4 CLI executes a 'save' - If a down-rev firewall is running, the savesets command produces confusing usage output Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-10 15:57:48 -07:00
Tom Eastep	478e72451a	Reinstate IPv6 DropSmurfs Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-10 09:42:23 -07:00
Tom Eastep	54da615be0	Allow the Shorewall-init installer to create SBINDIR Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-09 12:43:40 -07:00
Tom Eastep	2d948246c3	Revert "Adjust the .service files" This reverts commit `77015ebb4d`. Conflicts: Shorewall-init/shorewall-init.service Signed-off-by: Tom Eastep <teastep@shorewall.net>	2014-10-09 07:17:54 -07:00