# Description
Working on uniformizing the ending messages regarding methods usage()
and extra_usage(). This is related to the issue
https://github.com/nushell/nushell/issues/5066 after discussing it with
@jntrnr
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
#8258
Math floor and ceil return int types rather than floats.
# User-Facing Changes
Before:
```
/home/rdevenney/projects/open_source/nushell〉[(3.14 | math ceil | describe),
(3.14 | math floor | describe),
(3 | math ceil | describe),
(3 | math floor | describe)]
╭───┬───────╮
│ 0 │ float │
│ 1 │ float │
│ 2 │ int │
│ 3 │ int │
╰───┴───────╯
```
After:
```
/home/rdevenney/projects/open_source/nushell〉[(3.14 | math ceil | describe),
(3.14 | math floor | describe),
(3 | math ceil | describe),
(3 | math floor | describe)]
╭───┬─────╮
│ 0 │ int │
│ 1 │ int │
│ 2 │ int │
│ 3 │ int │
╰───┴─────╯
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Follow up of https://github.com/nushell/nushell/pull/8255
Sorry about the max-time argument, I didn't pay attention to the
copy-paste. Regarding the insecure argument, the problem was before I
began to work on the refacto. My mistake was to not have tested this
argument.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
When the crate nu_cmd_lang crate was created last week example_test.rs
was copied over from nu_command
to nu_cmd_lang. By doing this there was a set of methods in
example_test.rs that existed in both crates...
This PR removes the redundancy by moving all of those duplicated methods
into the crate nu_test_support in a newly created file called
example_support.rs
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Below is the result of `into datetime --list | uniq -d`.
```
╭───┬───────────────┬─────────┬───────────────────────────────────────╮
│ # │ Specification │ Example │ Description │
├───┼───────────────┼─────────┼───────────────────────────────────────┤
│ 0 │ %Y │ 2023 │ The full proleptic Gregorian year, │
│ │ │ │ zero-padded to 4 digits. │
│ 1 │ %C │ 20 │ The proleptic Gregorian year divided │
│ │ │ │ by 100, zero-padded to 2 digits. │
╰───┴───────────────┴─────────┴───────────────────────────────────────╯
```
It's supposed to be an empty table, but it has two rows. I removed the
duplicates.
# User-Facing Changes
`into datetime --list` will print out a correct table.
# Description
This PR adds an alternative alias implementation. Old aliases still work
but you need to use `old-alias` instead of `alias`.
Instead of replacing spans in the original code and re-parsing, which
proved to be extremely error-prone and a constant source of panics, the
new implementation creates a new command that references the old
command. Consider the new alias defined as `alias ll = ls -l`. The
parser creates a new command called `ll` and remembers that it is
actually a `ls` command called with the `-l` flag. Then, when the parser
sees the `ll` command, it will translate it to `ls -l` and passes to it
any parameters that were passed to the call to `ll`. It works quite
similar to how known externals defined with `extern` are implemented.
The new alias implementation should work the same way as the old
aliases, including exporting from modules, referencing both known and
unknown externals. It seems to preserve custom completions and pipeline
metadata. It is quite robust in most cases but there are some rough
edges (see later).
Fixes https://github.com/nushell/nushell/issues/7648,
https://github.com/nushell/nushell/issues/8026,
https://github.com/nushell/nushell/issues/7512,
https://github.com/nushell/nushell/issues/5780,
https://github.com/nushell/nushell/issues/7754
No effect: https://github.com/nushell/nushell/issues/8122 (we might
revisit the completions code after this PR)
Should use custom command instead:
https://github.com/nushell/nushell/issues/6048
# User-Facing Changes
Since aliases are now basically commands, it has some new implications:
1. `alias spam = "spam"` (requires command call)
* **workaround**: use `alias spam = echo "spam"`
2. `def foo [] { 'foo' }; alias foo = ls -l` (foo defined more than
once)
* **workaround**: use different name (commands also have this
limitation)
4. `alias ls = (ls | sort-by type name -i)`
* **workaround**: Use custom command. _The common issue with this is
that it is currently not easy to pass flags through custom commands and
command referencing itself will lead to stack overflow. Both of these
issues are meant to be addressed._
5. TODO: Help messages, `which` command, `$nu.scope.aliases`, etc.
* Should we treat the aliases as commands or should they be separated
from regular commands?
6. Needs better error message and syntax highlight for recursed alias
(`alias f = f`)
7. Can't create alias with the same name as existing command (`alias ls
= ls -a`)
* Might be possible to add support for it (not 100% sure)
8. Standalone `alias` doesn't list aliases anymore
9. Can't alias parser keywords (e.g., stuff like `alias ou = overlay
use` won't work)
* TODO: Needs a better error message when attempting to do so
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Bumps [csv](https://github.com/BurntSushi/rust-csv) from 1.1.6 to 1.2.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="fa01b78533"><code>fa01b78</code></a>
1.2.0</li>
<li><a
href="2ba20b55d9"><code>2ba20b5</code></a>
readme: various updates</li>
<li><a
href="521294f87b"><code>521294f</code></a>
msrv: set rust-version = 1.60</li>
<li><a
href="31c8ebc49d"><code>31c8ebc</code></a>
readme: updates and set rust-version</li>
<li><a
href="a0e83883e2"><code>a0e8388</code></a>
deps: drop 'bstr'</li>
<li><a
href="9e1126a3f4"><code>9e1126a</code></a>
cargo: update some fields</li>
<li><a
href="d7a4f7dcc6"><code>d7a4f7d</code></a>
rust: move to 2021 edition</li>
<li><a
href="022ac05205"><code>022ac05</code></a>
error: drop 'source' impl</li>
<li><a
href="9ab83111a7"><code>9ab8311</code></a>
*: better import grouping and short hand struct init</li>
<li><a
href="ea0273c531"><code>ea0273c</code></a>
*: fix all warnings and update code</li>
<li>Additional commits viewable in <a
href="https://github.com/BurntSushi/rust-csv/compare/1.1.6...1.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [bytesize](https://github.com/hyunsik/bytesize) from 1.1.0 to
1.2.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/hyunsik/bytesize/releases">bytesize's
releases</a>.</em></p>
<blockquote>
<h2>Release 1.2.0</h2>
<h2>Changes</h2>
<ul>
<li>serde improvements <a
href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/29">#29</a>
(<a
href="https://github.com/joeroback"><code>@joeroback</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="476dc867b2"><code>476dc86</code></a>
Remove -dev suffix for release</li>
<li><a
href="eaaf3bc097"><code>eaaf3bc</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/29">#29</a>
from joeroback/serde_improvements</li>
<li><a
href="c7a785bd2c"><code>c7a785b</code></a>
resolves <a
href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/27">#27</a>,
fixes several clippy warnings with u16/u8 and is_digit/is_ascii...</li>
<li><a
href="db44636f05"><code>db44636</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/28">#28</a>
from ileixe/master</li>
<li><a
href="58cf4a5024"><code>58cf4a5</code></a>
Change as_u64() to const</li>
<li><a
href="065c00b54f"><code>065c00b</code></a>
Change the crate version to 1.2.0-dev</li>
<li>See full diff in <a
href="https://github.com/hyunsik/bytesize/compare/v1.1.0...v1.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Fixes#8145, by disallowing any rows that are duplicated.
```
❯ ls | select 0 0
Error:
× Select only allows unique rows
╭─[entry #1:1:1]
1 │ ls | select 0 0
· ┬
· ╰── duplicated row
╰────
```
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
### What?
This change removes 3 flags (`--all`, `--both`, and `--format`) from
`str trim`. This is a net reduction of ~450 LoC and `str trim` no longer
depends on `fancy_regex`.
### Why?
I found these flags to be quite confusing when reviewing `str trim`
earlier today:
1. `--all` removes characters even if they're in the centre of the the
string.
- This is arguably not "trimming"! In all programming languages I'm
familiar with, trimming only affects the start and end of a string.
- If someone needs to do this, `str replace` is more natural IMO
2. `--both` trims from the left and right
- Confusing and unnecessary given that this is also the default
behaviour
3. `--format` replaces multiple spaces with a single space, even in the
centre of the string
- Again, I don't think this falls under the scope of "trimming". IMO
`str replace` is a more natural fit
I believe that `str trim` is simpler and easier to understand after this
change.
### Before
```
〉help str trim
Trim whitespace or specific character
Search terms: whitespace, strip, lstrip, rstrip
Usage:
> str trim {flags} ...(rest)
Flags:
-h, --help - Display the help message for this command
-c, --char <String> - character to trim (default: whitespace)
-l, --left - trims characters only from the beginning of the string
-r, --right - trims characters only from the end of the string
-a, --all - trims all characters from both sides of the string *and* in the middle
-b, --both - trims all characters from left and right side of the string
-f, --format - trims spaces replacing multiple characters with singles in the middle
```
### After
```
〉help str trim
Trim whitespace or specific character
Search terms: whitespace, strip, lstrip, rstrip
Usage:
> str trim {flags} ...(rest)
Flags:
-h, --help - Display the help message for this command
-c, --char <String> - character to trim (default: whitespace)
-l, --left - trims characters only from the beginning of the string
-r, --right - trims characters only from the end of the string
```
# Description
if you try to copy a big file with `cp` you will noticed that you can't
interrupt the process. This pull request fix that.
This was discuss here
https://github.com/nushell/nushell/pull/8012#issuecomment-1427313054
# User-Facing Changes
None
# Tests + Formatting
- Check - `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- Check - `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- Check - `cargo test --workspace` to check that all tests pass
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
Should close#8035.
> **Note**
> this is my first technical PR for `nushell`
> - i might very well miss things
> - i tried to be as complete as possible about the changes
> - please require further changes if i did something wrong, i'm open to
any remark 😌
# Description
this PR adds, when it is defined in the `examples` method of the
`Command` implementations, the output of the examples to the output of
the `help` command.
this PR
- only modifies `crates/nu-engine/src/documentation.rs` and the
`get_documentation` function
- defines a new `WD` constant to print a **W**hite **D**immed `...`
- a `match` statement at the end of the example loop to
- print a white dimmed `...` when the example is not set, i.e. set to
`None` in the `examples` method of the `Command` implementation of a
command
- pretty print the output of the associated example `Value` when it has
been defined
> **Warning**
> LIMITATIONS:
> - i use snippets from `crates/nu-protocol/src/pipeline_data.rs`
> - the table creation from `pub PipelineData::print`, i.e. the `let
decl_id = ...;` and `let table = ...;` in the change
> - the table item printing from `PipelineData::write_all_and_flush`,
i.e. the `for item in table { ... }`
>
> ADDRESSED:
> - ~~the formatting of the output is not perfect and has to be fully
left aligned with the first column for now~~ (fixed with
[`5abeefd558c34ba9bae15e2f183ff4625442921e`..`a62be1b5a2c730959da5dbc028bb91ffe5093f63`](5abeefd558c34ba9bae15e2f183ff4625442921e..a62be1b5a2c730959da5dbc028bb91ffe5093f63))
> - ~~i'm using `.unwrap()` on both the changes above, not sure how to
handle this for now~~ (fixed for now thanks to 49f1dc080)
> - ~~the tests and `clippy` checks do not pass for now, see below~~
(`clippy` now is happy with 49f1dc080 and the tests pass with
11666bc715)
# User-Facing Changes
the output of the `help <command>` command is now augmented with the
outputs of the examples, when they are defined.
- `with-env`
```bash
> help with-env
...
Examples:
Set the MYENV environment variable
> with-env [MYENV "my env value"] { $env.MYENV }
my env value
Set by primitive value list
> with-env [X Y W Z] { $env.X }
Y
Set by single row table
> with-env [[X W]; [Y Z]] { $env.W }
Z
Set by key-value record
> with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
╭───┬───╮
│ 0 │ Y │
│ 1 │ Z │
╰───┴───╯
```
instead of the previous
```bash
> help with-env
...
Examples:
Set the MYENV environment variable
> with-env [MYENV "my env value"] { $env.MYENV }
Set by primitive value list
> with-env [X Y W Z] { $env.X }
Set by single row table
> with-env [[X W]; [Y Z]] { $env.W }
Set by key-value record
> with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
- `merge`
```bash
> help merge
...
Examples:
Add an 'index' column to the input table
> [a b c] | wrap name | merge ( [1 2 3] | wrap index )
╭───┬──────╮
│ # │ name │
├───┼──────┤
│ 1 │ a │
│ 2 │ b │
│ 3 │ c │
╰───┴──────╯
Merge two records
> {a: 1, b: 2} | merge {c: 3}
╭───┬───╮
│ a │ 1 │
│ b │ 2 │
│ c │ 3 │
╰───┴───╯
Merge two tables, overwriting overlapping columns
> [{columnA: A0 columnB: B0}] | merge [{columnA: 'A0*'}]
╭───┬─────────┬─────────╮
│ # │ columnA │ columnB │
├───┼─────────┼─────────┤
│ 0 │ A0* │ B0 │
╰───┴─────────┴─────────╯
```
instead of the previous
```bash
> help merge
...
Examples:
Add an 'index' column to the input table
> [a b c] | wrap name | merge ( [1 2 3] | wrap index )
Merge two records
> {a: 1, b: 2} | merge {c: 3}
Merge two tables, overwriting overlapping columns
> [{columnA: A0 columnB: B0}] | merge [{columnA: 'A0*'}]
```
# Description
`bytes starts-with` converts the input into a `Value` before running
.starts_with to find if the binary matches. This has two side effects:
it makes the code simpler, only dealing in whole values, and simplifying
a lot of input pipeline handling and value transforming it would
otherwise have to do. _Especially_ in the presence of a cell path to
drill into. It also makes buffers the entire input into memory, which
can take up a lot of memory when dealing with large files, especially if
you only want to check the first few bytes (like for a magic number).
This PR adds a special branch on PipelineData::ExternalStream with a
streaming version of starts_with.
# User-Facing Changes
Opening large files and running bytes starts-with on them will not take
a long time.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# Drawbacks
Streaming checking is more complicated, and there may be bugs. I tested
it with multiple chunks with string data and binary data and it seems to
work alright up to 8k and over bytes, though.
The existing `operate` method still exists because the way it handles
cell paths and values is complicated. This causes some "code
duplication", or at least some intent duplication, between the value
code and the streaming code. This might be worthwhile considering the
performance gains (approaching infinity on larger inputs).
Another thing to consider is that my ExternalStream branch considers
string data as valid input. The operate branch only parses Binary
values, so it would fail. `open` is kind of unpredictable on whether it
returns string data or binary data, even when passing `--raw`. I think
this can be a problem but not really one I'm trying to tackle in this
PR, so, it's worth considering.
# Description
Fixes#8051.
# User-Facing Changes
You can now put command arguments into the EDITOR and VISUAL config /
env variables.
# Tests + Formatting
I don't know how to write tests for this. However, I set $env.EDITOR to
"nvim -R" and it seemed to work.
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#8202
# User-Facing Changes
`str starts-with` and `str ends-with` now has a `-i` switch.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While working on #8210 I noticed that we did not explicitly check a
number of `Value` variants for proper serialization and deserialization.
- Test filesize in `to/from nuon`
- Test duration in `from/to nuon`
- Test datetime in `from/to nuon`
- Test graceful failure of closure in `to nuon`
# User-Facing Changes
(-)
# Tests + Formatting
All about them tests
# Description
My terminal emulator happens to be called `st`
(https://st.suckless.org/) which breaks these tests for me
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The code to generate the nuon format supports writing range literals,
which obviates the need to expand the range as added in #8047
# User-Facing Changes
`to nuon` will still output ranges as literals
# Tests + Formatting
- Add test for `to nuon` range output
- Add `from nuon` test for range
fix typo in help messages
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
Fixes#8002, which expands ranges `1..3` to expand to array-like when
saving and converting to json. Now,
```
> 1..3 | save foo.json
# foo.json
[
1,
2,
3
]
> 1..3 | to json
[
1,
2,
3
]
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#7615
# Description
When calling external commands, we create a table from the pipeline data
to handle external commands expecting paginated input. When a binary
value is made into a table, we convert the vector of bytes representing
the binary bytes into a pretty formatted string. This results in the
pretty formatted string being sent to external commands instead of the
actual binary bytes. By checking whether the stdout of the call is being
redirected, we can decide whether to send the raw binary bytes or the
pretty formatted output when creating a table command.
# User-Facing Changes
When passing binary values to external commands, the external command
will receive the actual bytes instead of the pretty printed string. Use
cases that don't involve piping a binary value into an external command
are unchanged.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
cargo fmt --all -- --check to check standard code formatting (cargo fmt
--all applies these changes)
cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect to check that you're using the standard code
style
cargo test --workspace to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
For auto-generated documentation, move the `hash _` commands into the
Hash category
# User-Facing Changes
Apart from documentation, none.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR just fixes one `ansi` test so that the test runner will accept
it and test the scenario. No other changes.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This breaks out the core_commands into a separate crate called
nu_cmd_lang
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Based on https://github.com/nushell/nushell/pull/8135.
Add the remaining HTTP commands:
- Head
- Patch
- Put
- Delete
It should finally resolve the issue
https://github.com/nushell/nushell/issues/2741
# User-Facing Changes
New sub HTTP commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Relative: #8060
While investigating, I found we need to update notify, which is a good
step to remove some duplicate dependencies.
As title, here are some goods and bads after updating:
## Good
keep dependency up to date, and remove duplidate dependency(cfg-if,
winapi) in Cargo.lock.
## Bad
Introduce some breaking changes:
After updating to notify v5, I found that we have to remove `Rename`
events.
But I've testing under notify v4, and it doesn't work good if we running
the following command on MacOS:
```
touch a
mv a b
```
It fires file create event, but no file rename event. So `rename` event
is not really reliable, so I think it's ok for us to remove `Rename`
events.
The reason to remove `--debounce-ms` flag:
It's not provided by defualt file watcher, we can use
[PollWatcher](https://docs.rs/notify/latest/notify/poll/struct.PollWatcher.html),
but it scans filesystem, which is really expensive. So I just remove the
flag.
# User-Facing Changes
1. `--debounce-ms` flag is removed
2. no longer watch `Rename` event.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# NOTE
Clean duplicate of #7825
Sorry about all the mess guys... I got confuse with GitHub and and ended
up mankind that mess.
This the same code I just cleaned the commits.
# Description
Progress bar implementation for the `cp` command. Now if the flag `-p`
or `--progress` is set, then the user will be able to see the progress
of the file or files being copy
# User-Facing Changes
A new flag (`--progress` `-p`) was added to the `cp` command
Examples:
```nu
cp -p test_file.txt test_folder_1\
cp -r -p test_folder\* test_folder_1\
cp -r -p -i test_folder\* test_folder_1\
```
## Notes
- The progress bar uses `std::io::{Read, Write}` instead of
`std::fs::copy` to get the progress. that means that when the progress
bar is used the copy process might be a bit slower.
- Progress bar for symbolic links TBD: Since symbolic links are usually
very light I think is not worth it to duplicate the function
`copy_symlink` just to add a progress bar that will be so fast to the
point is not needed, but.. for consistency purposes we might need to
added it, In that case I would have to pass the variable `progress` by
parameter (to not duplicate code unnecessary). If I do that i would have
to pass the `progress` var to every function to respect `copy_impl: impl
Fn(PathBuf, PathBuf, Span)`. Please let me know if this is not clear :p
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
Fixes: #8136
# User-Facing Changes
The following command
```
let VAR = ^cat non-existing-file; echo "failed"
```
will no longer output `failed` message
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
GH Issue: [#8074](https://github.com/nushell/nushell/issues/8074)
Adding SIGINT Ctrl + C functionality to *most* of the `input` command.
`input` with the flags `--suppress-output` and `--bytes-until` are
executed in raw mode which allows a ^C signal to be caught as it's
input, but an "optionless" call of `input` is using a standard
`read_line()` method that takes a ^C input and clears the buffer of any
data collected before the ^C. I'm more than happy to alter the
"optionless" call but putting it in raw mode hides the user input, so at
the moment that's unchanged.
# User-Facing Changes
Now ^C anywhere in the stdin stream will cause the command to SIGINT (as
long as the command isn't optionless), rather than being read in as part
of the input.
```
/home/rdevenney/projects/open_source/nushell〉input --suppress-output
Error: nu:🐚:io_error (link)
× I/O error
help: SIGINT
```
```
/home/rdevenney/projects/open_source/nushell〉input --bytes-until "a"
Error: nu:🐚:io_error (link)
× I/O error
help: SIGINT
```
As mentioned above, the default input behavior is the same.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
See title.
Also changed some misleading wording in `reject`'s help.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Final rework for https://github.com/nushell/nushell/issues/2741, after
this one, we'll add for free HTTP PUT, PATCH, DELETE and HEAD.
# User-Facing Changes
We can now post data using HTTP GET. I add some examples in the output
of `http get --help` to demonstrate this new behavior.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
closes#8153
This PR allows different types of lists, like `list<string>` and
`list<any>` to be appended with the `++=` operator.
## Before
```
mut args = [ hello ("hello" | path join world)]
$args ++= [ foo bar ]
Error: nu::parser::type_mismatch (link)
× Type mismatch during operation.
╭─[entry #2:1:1]
1 │ $args ++= [ foo bar ]
· ─────┬─────
· ╰── expected list<any>, found list<string>
╰────
```
## After
```
mut args = [ hello ("hello" | path join world)]
$args ++= [ foo bar ]
$args
╭───┬─────────────╮
│ 0 │ hello │
│ 1 │ hello\world │
│ 2 │ foo │
│ 3 │ bar │
╰───┴─────────────╯
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes a bug where a default list in a custom command parameter
wasn't being accepted. The reason was because it was comparing specific
types of list like `list<any>` != `list<string>`. So, this PR attempts
to fix that.
### Before
```
> def f [param: list = [one]] { echo $param }
Error: nu::parser::assignment_mismatch (link)
× Default value wrong type
╭─[entry #1:1:1]
1 │ def f [param: list = [one]] { echo $param }
· ──┬──
· ╰── default value not list<any>
╰────
```
### After
```
> def f [param: list = [one]] {echo $param}
> f
╭───┬─────╮
│ 0 │ one │
╰───┴─────╯
```
closes#8092
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes the following message:
```
〉(ls).0 | into string
Error: nu:🐚:cant_convert (link)
× Can't convert to record.
╭─[entry #4:1:1]
1 │ (ls).0 | into string
· ─────┬─────
· ╰── can't convert string to record
╰────
help: try using the `to nuon` command
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Before landing:
- [x] `reedline 0.16.0` is out and pinned.
- [x] all fixes and features necessary are landed.
In the meantime:
- [ ] feed the release notes with relevant features and breaking changes
Related to #8119.
Should address the review comment by @sholderbach from #8119.
# Description
this PR adds the output to the new example for the `with-env` command
introduced by #8119.
```bash
with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
should output
```bash
["Y", "Z"]
```
hence the proposition from @sholderbach, i.e.
```rust
Some(Value::list(
vec![Value::test_string("Y"), Value::test_string("Z")],
Span::test_data(),
))
```
# User-Facing Changes
_none_
# Tests + Formatting
not really a test, only the output value for the last `with-env` example
- ✔️ `cargo fmt --all`
- ✔️ `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- ✔️ `cargo test --workspace`
# After Submitting
_none_
# Description
While debugging #8139 I noticed that there was some error information
coming from the toml crate that we were not displaying. This would've
helped me to understand what was going on. So, this PR shows more
verbose errors when toml fails to parse.
### Before
```
cargo llvm-cov show-env | from toml
Error: nu:🐚:cant_convert (link)
× Can't convert to structured toml data.
╭─[entry #1:1:1]
1 │ cargo llvm-cov show-env | from toml
· ──┬──
· ╰── can't convert string to structured toml data
╰────
```
### After
```
cargo llvm-cov show-env | from toml
Error: nu:🐚:cant_convert (link)
× Can't convert to structured toml data.
╭─[entry #1:1:1]
1 │ cargo llvm-cov show-env | from toml
· ──┬──
· ╰── can't convert string to structured toml data
╰────
help: TOML parse error at line 2, column 24
|
2 | LLVM_PROFILE_FILE="C:\CarTar\nushell-%p-%m.profraw"
| ^
invalid escape sequence
expected `b`, `f`, `n`, `r`, `t`, `u`, `U`, `\`, `"`
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Enhancement of new `fill` command (#7846) to handle content including
ANSI escape codes for formatting or multi-code-point Unicode grapheme
clusters.
In both of these cases, the content is (many) bytes longer than its
visible length, and `fill` was counting the extra bytes so not adding
enough fill characters.
# Description
This script:
```rust
# the teacher emoji `\u{1F9D1}\u{200D}\u{1F3EB}` is 3 code points, but only 1 print position wide.
echo "This output should be 3 print positions wide, with leading and trailing `+`"
$"\u{1F9D1}\u{200D}\u{1F3EB}" | fill -c "+" -w 3 -a "c"
echo "This output should be 3 print positions wide, with leading and trailing `+`"
$"(ansi green)a(ansi reset)" | fill -c "+" -w 3 -a c
echo ""
```
Was producing this output:
```rust
This output should be 3 print positions wide, with leading and trailing `+`
🧑🏫
This output should be 3 print positions wide, with leading and trailing `+`
a
```
After this PR, it produces this output:
```rust
This output should be 3 print positions wide, with leading and trailing `+`
+🧑🏫+
This output should be 3 print positions wide, with leading and trailing `+`
+a+
```
# User-Facing Changes
Users may have to undo fixes they may have introduced to work around the
former behavior. I have one such in my prompt string that I can now
revert.
# Tests + Formatting
Don't forget to add tests that cover your changes.
-- Done
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
`fill` command not documented in the book, and it still talks about `str
lpad/rpad`. I'll fix.
Note added dependency on a new library `print-positions`, which is an
iterator that yields a complete print position (cluster + Ansi sequence)
per call. Should this be vendored?
Bumps [sysinfo](https://github.com/GuillaumeGomez/sysinfo) from 0.27.7
to 0.28.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/GuillaumeGomez/sysinfo/blob/master/CHANGELOG.md">sysinfo's
changelog</a>.</em></p>
<blockquote>
<h1>0.28.0</h1>
<ul>
<li>Linux: Fix name and CPU usage for processes tasks.</li>
<li>unix: Keep all users, even "not real" accounts.</li>
<li>Windows: Use SID for Users ID.</li>
<li>Fix C API.</li>
<li>Disable default cdylib compilation.</li>
<li>Add <code>serde</code> feature to enable serialization.</li>
<li>Linux: Handle <code>Idle</code> state in
<code>ProcessStatus</code>.</li>
<li>Linux: Add brand and name of ARM CPUs.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/GuillaumeGomez/sysinfo/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [winreg](https://github.com/gentoo90/winreg-rs) from 0.10.1 to
0.11.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/gentoo90/winreg-rs/blob/master/CHANGELOG.md">winreg's
changelog</a>.</em></p>
<blockquote>
<h2>0.11.0</h2>
<ul>
<li>Migrate to the 2018 edition of Rust</li>
<li>Move the code from <code>lib.rs</code> to separate files</li>
<li>Use <a
href="https://crates.io/crates/cfg-if"><code>cfg-if</code></a> instead
of <code>build.rs</code> to fail build on non-windows systems</li>
<li>Reimplement deserialization logic, implement [de]serialization for
byte arrays (<a
href="https://github-redirect.dependabot.com/gentoo90/winreg-rs/issues/49">#49</a>)</li>
<li>Fix some typos and <code>clippy</code> warnings</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f34742d674"><code>f34742d</code></a>
Bump version to 0.11.0</li>
<li><a
href="75f2593f62"><code>75f2593</code></a>
Move the changelog to a separate file</li>
<li><a
href="1f6f877ed7"><code>1f6f877</code></a>
Fix some clippy warnings</li>
<li><a
href="7a32d642cd"><code>7a32d64</code></a>
Implement [de]serialization for byte arrays</li>
<li><a
href="8464557c2d"><code>8464557</code></a>
Reimplement deserialization logic</li>
<li><a
href="9e8dc28029"><code>9e8dc28</code></a>
Put serialization tests into a separate file</li>
<li><a
href="04f7d232c7"><code>04f7d23</code></a>
Use <code>cfg-if</code> to fail build on non-windows systems</li>
<li><a
href="c3ac5ba5ea"><code>c3ac5ba</code></a>
Move the code from <code>lib.rs</code> to separate files</li>
<li><a
href="17378a9ca4"><code>17378a9</code></a>
Migrate to the 2018 edition of Rust</li>
<li><a
href="f4d45923ab"><code>f4d4592</code></a>
Remove Appveyor. It's broken anyway</li>
<li>Additional commits viewable in <a
href="https://github.com/gentoo90/winreg-rs/compare/v0.10.1...v0.11.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
hello there 👋😋
when messing around with `with-env`, looking at the examples, i did not
understand that we could directly run `with-env` with a record as the
argument and not from the input of a pipe 😮
even though the last example, i.e.
```bash
Set by row(e.g. `open x.json` or `from json`)
> '{"X":"Y","W":"Z"}'|from json|with-env $in { [$env.X $env.W] }
```
, is equivalent, just the record comes from the pipe, i thought adding
that explicite new example could be helpful 😌
# Description
looking at the single real change of this PR, i.e. 86ef34e90, you can
see i've simply added
```bash
Set by key-value record
> with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
just before the example above
> **Note**
> i've also added spaces around the '|' in the last examples, from
> ```bash
> > '{"X":"Y","W":"Z"}'|from json|with-env $in { [$env.X $env.W] }
> ```
> to
> ```bash
> > '{"X":"Y","W":"Z"}' | from json | with-env $in { [$env.X $env.W] }
> ```
> hopefully making the pipeline a bit easier to read 👍
### hope you like that 😏
# User-Facing Changes
a new example has been added to `with-env`
# Tests + Formatting
no tests have been added
# After Submitting
the change should not affect the website, i think
=> if i need to generate the associated `HTML` file on
https://github.com/nushell/nushell.github.io, please tell me 😋
# Description
In order to work on https://github.com/nushell/nushell/issues/2741, I'm
preparing the code.
# User-Facing Changes
Both commands do support the timeout option.
**But the timeout argument `-t, --timeout` has been migrated to `-m,
--max-time`**. I had to make a choice since there is another option
using the short command `t` which is "content-type".
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
close#8033
So as I said they suppose to be there;
I've basically added a change of style if --collapse is used.
PS: I guess it's worth to add tests so hold on if you'll plan to merge
it.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
Fixes issue #7792 Fix basically by @kubouch , "stolen" by me :). Edit:
Added "proper" fix rather than the one liner
```
start Cargo.toml
// Opens in default editor
```
```
start https://www.google.com [alternative_browser]
// Opens page in default browser or another browser if specified
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This does two fixes for bare words:
* It changes completions for paths to wrap a path with backticks if it
starts with a number. This helps bare words that start with numbers be
separate from unit values
* It allows bare words wrapped with backticks to be the name of a
command. Backtick values in command positions are no longer treated as
strings
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes a bug that occurs if you pass `rename --column` and empty
list like `ls | rename -c []`.
## Before
```
> ls | rename -c []
thread 'main' panicked at 'index out of bounds: the len is 0 but the index is 0', crates\nu-command\src\filters\rename.rs:110:15
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
## After
```
> ls | rename -c []
Error: nu:🐚:type_mismatch (link)
× Type mismatch.
╭─[entry #1:1:1]
1 │ ls | rename -c []
· ─┬
· ╰── The list cannot be empty and must contain only two values: the column's name and its replacement value
╰────
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR tweaks how `ast` works a tiny bit by outputting values in stead
of eprintln!'s. It also moves the `ast` command into the folder with the
rest of the debug commands and changes the category to debug.
I started adding some tests but couldn't figure out a good way to do it
since every `ast` command contains spans that will be different on each
invocation.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Now that we've landed the debug commands we were working on, let's
relocate them to an easier place to find all of them. That's what this
PR does.
The only actual code change was changing the `timeit` command to a
`Category::Debug` command. The rest is just moving things around and
hooking them up.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, I found this feature is useful to me too :)
Closes: #8039
# User-Facing Changes
```
❯ 3 * "ab"
ababab
❯ 3 * [1 2 3]
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 1 │
│ 4 │ 2 │
│ 5 │ 3 │
│ 6 │ 1 │
│ 7 │ 2 │
│ 8 │ 3 │
╰───┴───╯
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
From nushell 0.8 philosophy:
https://github.com/nushell/nushell.github.io/blob/main/contributor-book/philosophy_0_80.md#core-categories
> The following categories should be moved to plugins:
Uncommon format support
So this pr is trying to move following commands to plugin:
- [X] from eml
- [x] from ics
- [x] from ini
- [x] from vcf
And we can have a new plugin handles for these formatting, currently
it's implemented here:
https://github.com/WindSoilder/nu_plugin_format
The command usage should be the same to original command.
If it's ok, the plugin can support more formats like
[parquet](https://github.com/fdncred/nu_plugin_from_parquet), or [EDN
format](https://github.com/nushell/nushell/issues/6415), or something
else.
Just create a draft pr to show what's the blueprint looks like, and is
it a good direction to move forward?
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Bumps [roxmltree](https://github.com/RazrFalcon/roxmltree) from 0.17.0
to 0.18.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/RazrFalcon/roxmltree/blob/master/CHANGELOG.md">roxmltree's
changelog</a>.</em></p>
<blockquote>
<h2>[0.18.0] - 2023-02-04</h2>
<h3>Added</h3>
<ul>
<li><code>StringStorage</code> that exposes an internal string
storage.</li>
<li>Allocated strings are stored as <code>Arc<str></code> and not
<code>String</code> now.</li>
<li><code>Node::text_storage</code></li>
<li><code>Node::tail_storage</code></li>
<li><code>Attribute::value_storage</code></li>
<li><code>Node::range</code></li>
</ul>
<h3>Removed</h3>
<ul>
<li><code>Node::position</code>. Use <code>Node::range</code>
instead.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Some methods return longer lifetimes now.
Thanks to <a
href="https://github.com/adamreichold"><code>@adamreichold</code></a></li>
<li>Overly verbose Debug implementations.
Thanks to <a
href="https://github.com/adamreichold"><code>@adamreichold</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8f6f14bbc7"><code>8f6f14b</code></a>
Version bump.</li>
<li><a
href="c4d622fccc"><code>c4d622f</code></a>
Store node's end position again.</li>
<li><a
href="3d33827a75"><code>3d33827</code></a>
Use ref-counted owned strings.</li>
<li><a
href="e81718610a"><code>e817186</code></a>
Expose 'input lifetime where it is the backing lifetime.</li>
<li><a
href="0b12673528"><code>0b12673</code></a>
Use consistent debug impls for the various iterators that avoid
formatting th...</li>
<li>See full diff in <a
href="https://github.com/RazrFalcon/roxmltree/compare/v0.17.0...v0.18.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
[//]: # (dependabot-start)
⚠️ **Dependabot is rebasing this PR** ⚠️
Rebasing might not happen immediately, so don't worry if this takes some
time.
Note: if you make any changes to this PR yourself, they will take
precedence over the rebase.
---
[//]: # (dependabot-end)
Bumps [rstest](https://github.com/la10736/rstest) from 0.15.0 to 0.16.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/la10736/rstest/releases">rstest's
releases</a>.</em></p>
<blockquote>
<h2>0.16.0</h2>
<p>Use values expression to define test names.</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/la10736/rstest/blob/master/CHANGELOG.md">rstest's
changelog</a>.</em></p>
<blockquote>
<h2>[0.16.0] 2022/11/27</h2>
<h3>Changed</h3>
<ul>
<li>Show <code>TEST START</code> banner only when trace some argument:
See <a
href="https://github-redirect.dependabot.com/la10736/rstest/issues/158">#158</a>
for details.</li>
<li>Add values to test name: See <a
href="https://github-redirect.dependabot.com/la10736/rstest/issues/160">#160</a>
for details.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Updated test fixtures to 1.64.0 compiler's error messages.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d7ff088126"><code>d7ff088</code></a>
Update checkout list</li>
<li><a
href="4386575950"><code>4386575</code></a>
Version 0.16.0 chengelog</li>
<li><a
href="41749a881e"><code>41749a8</code></a>
Fix clippy warning</li>
<li><a
href="daaddde1a0"><code>daaddde</code></a>
Bump to 0.16.0 version and upgrade dependency</li>
<li><a
href="576768e4b3"><code>576768e</code></a>
Fixed dev dependency in rstest_macros</li>
<li><a
href="a6eb3a96cb"><code>a6eb3a9</code></a>
Update rstest_test version</li>
<li><a
href="4a18dd0bd1"><code>4a18dd0</code></a>
Update version</li>
<li><a
href="29648832ce"><code>2964883</code></a>
Update dependency version</li>
<li><a
href="5ad7e3fd61"><code>5ad7e3f</code></a>
<a
href="https://github-redirect.dependabot.com/la10736/rstest/issues/160">#160</a>
Add test for module annotation</li>
<li><a
href="a302be019f"><code>a302be0</code></a>
<a
href="https://github-redirect.dependabot.com/la10736/rstest/issues/160">#160</a>
Tests fixed and add unit for allow</li>
<li>Additional commits viewable in <a
href="https://github.com/la10736/rstest/compare/0.15.0...0.16.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [proptest](https://github.com/proptest-rs/proptest) from 1.0.0 to
1.1.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="75c749ee50"><code>75c749e</code></a>
bump version to 1.1.0</li>
<li><a
href="a7c75a1bcb"><code>a7c75a1</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/295">#295</a>
from proptest-rs/replays-dont-count-cases</li>
<li><a
href="a854d2ed7a"><code>a854d2e</code></a>
[replays-dont-count-cases] persisted failures are not counted against
success...</li>
<li><a
href="f8eff50603"><code>f8eff50</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/291">#291</a>
from schuelermine/fix/prop_assert_ne!</li>
<li><a
href="d38268304c"><code>d382683</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/294">#294</a>
from proptest-rs/fix-ci</li>
<li><a
href="ad0a4d311c"><code>ad0a4d3</code></a>
[fix-ci] changed the line for where the error occurs</li>
<li><a
href="00f29af8e8"><code>00f29af</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/288">#288</a>
from proptest-rs/const-generic-arbitrary</li>
<li><a
href="a16853f4fc"><code>a16853f</code></a>
Fix prop_assert_ne! requiring import of prop_assert!</li>
<li><a
href="b513a32c72"><code>b513a32</code></a>
Config : support disabling failure persistence via env var (<a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/287">#287</a>)</li>
<li><a
href="7a94e16589"><code>7a94e16</code></a>
note that PROPTEST_CASES and other env var requires the std feature (<a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/262">#262</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/proptest-rs/proptest/compare/1.0.0...v1.1.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
[GH issue](https://github.com/nushell/nushell/issues/8027)
The current error message for a cd command includes a Debug output of
the `io::Error` being returned from `canonicalize_with`, so it's been
replaced with a more user friendly and readable depiction of the error.
# User-Facing Changes
As described in the issue, I've changed the error message for a cd into
a directory that does not exist from:
```
/home/rdevenney/projects/open_source/nushell〉cd asdfasdf 02/11/2023 08:59:59 PM
Error: nu:🐚:directory_not_found (link)
× Directory not found
╭─[entry #2:1:1]
1 │ cd asdfasdf
· ────┬───
· ╰── directory not found
╰────
help: IO Error: Os { code: 2, kind: NotFound, message: "No such file or directory" }
```
To:
```
/home/rdevenney/projects/open_source/nushell〉cd asdfasdf 02/11/2023 08:58:38 PM
Error: nu:🐚:directory_not_found (link)
× Directory not found
╭─[entry #1:1:1]
1 │ cd asdfasdf
· ────┬───
· ╰── directory not found
╰────
help: IO Error: DirectoryNotFound
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
This one fixes env not being hidden inside closure, reported in the
conversation under https://github.com/nushell/nushell/issues/6593https://github.com/nushell/nushell/issues/6593https://github.com/nushell/nushell/issues/7937 still persist. These
seems a bit more involved and might need hidden env tracking also in the
engine state... I'm not yet sure what's causing it.
Also re-enables some env-related tests and removes unused Value clone.
# User-Facing Changes
Just a bugfix
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Improve error when `str replace <pattern>` detects a problem with
<pattern>.
# User-Facing Changes
New "Incorrect value" error:
```
〉 'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
Error: nu:🐚:incorrect_value (link)
× Incorrect value.
╭─[entry #1:1:1]
1 │ 'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
· ─────┬────
· ╰── Regex error: Parsing error at position 4: Invalid hex escape
╰────
```
We could fruitfully replace some of the current uses of
`ShellError::UnsupportedInput` with this error. 'Incorrect value' is
different from 'wrong type'
# Tests + Formatting
Don't forget to add tests that cover your changes.
* none added / changed.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds a deprecated message to the `benchmark` command.
```
> benchmark
Error: nu:🐚:deprecated_command (link)
× Deprecated command benchmark
╭─[entry #1:1:1]
1 │ benchmark
· ────┬────
· ╰── 'benchmark' is deprecated. Please use 'timeit' instead.
╰────
```
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Adds a `profile` command that profiles each pipeline element of a block
and can also recursively step into child blocks.
# Limitations
* It is implemented using pipeline metadata which currently get lost in
some circumstances (e.g.,
https://github.com/nushell/nushell/issues/4501). This means that the
profiler will lose data coming from subexpressions. This issue will
hopefully be solved in the future.
* It also does not step into individual loop iteration which I'm not
sure why but maybe that's a good thing.
# User-Facing Changes
Shouldn't change any existing behavior.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
The purpose of this command is to help to debug pipelines. It works by
allowing you to inject the `inspect` command into a pipeline at any
point. Then it shows you what the input description is and what the
input values are that are passed into `inspect`. With each step it
prints this information out while also passing the value information on
to the next step in the pipeline.
This command is kind of a "hack job" because it clones maybe too much
and I had to get creative in order to output two different tables. I'm
sure there are many ways this can be improved or combined into other
commands but I wanted to start here. Note that the `inspect` output is
written to stderr and the normal nushell output is written to stdout. If
we were to output both to stdout, nushell would get confused.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR renames the `benchmark` command to the `time` command.
# User-Facing Changes
new command name
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR changes the `metadata` command to a `Category::Debug` command
for better organization.
# User-Facing Changes
Just a different category.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The point of this command is to allow you to be able to format ints,
floats, filesizes, and strings with an alignment, padding, and a fill
character, as strings. It's meant to take the place of `str lpad` and
`str rpad`.
```
> help fill
Fill and Align
Search terms: display, render, format, pad, align
Usage:
> fill {flags}
Flags:
-h, --help - Display the help message for this command
-w, --width <Int> - The width of the output. Defaults to 1
-a, --alignment <String> - The alignment of the output. Defaults to Left (Left(l), Right(r), Center(c/m), MiddleRight(cr/mr))
-c, --character <String> - The character to fill with. Defaults to ' ' (space)
Signatures:
<number> | fill -> <string>
<string> | fill -> <string>
Examples:
Fill a string on the left side to a width of 15 with the character '─'
> 'nushell' | fill -a l -c '─' -w 15
Fill a string on the right side to a width of 15 with the character '─'
> 'nushell' | fill -a r -c '─' -w 15
Fill a string on both sides to a width of 15 with the character '─'
> 'nushell' | fill -a m -c '─' -w 15
Fill a number on the left side to a width of 5 with the character '0'
> 1 | fill --alignment right --character 0 --width 5
Fill a filesize on the left side to a width of 5 with the character '0'
> 1kib | fill --alignment middle --character 0 --width 10
```
# User-Facing Changes
Deprecated `str lpad` and `str rpad`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR makes `++` (the append operator) work with strings and binary
values. Can now do things like:
```bash
〉"a" ++ "b"
ab
〉0x[01 02] ++ 0x[03]
Length: 3 (0x3) bytes | printable whitespace ascii_other non_ascii
00000000: 01 02 03 •••
```
Closes#8015.
Bumps [ical](https://github.com/Peltoche/ical-rs) from 0.7.0 to 0.8.0.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/Peltoche/ical-rs/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR does the following:
1. Adds a new command called `view span` - which shows what is at the
location of the span parameters
2. Adds a new command called `view` - which just lists all the `view`
commands.
3. Renames `view-source` to `view source`.
4. Adds a new command called `view files` - which shows you what files
are loaded into nushell's EngineState memory.
5. Added a `Category::Debug` and put these commands (and others) into
it. (`inspect` needs to be added to it, but it's not landed yet)
Spans are important to nushell. One of their uses is to show where
errors are. For instance, in this example, the leader lines pointing to
parts of the command line are able to point to `10`, `/`, and `"bob"`
because each of those items have a span.
```
> 10 / "bob"
Error: nu::parser::unsupported_operation (link)
× Types mismatched for operation.
╭─[entry #8:1:1]
1 │ 10 / "bob"
· ─┬ ┬ ──┬──
· │ │ ╰── string
· │ ╰── doesn't support these values.
· ╰── int
╰────
help: Change int or string to be the right types and try again.
```
# Examples
## view span
Example:
```
> $env.config | get keybindings | first | debug -r
... bunch of stuff
span: Span {
start: 68065,
end: 68090,
},
},
],
span: Span {
start: 68050,
end: 68101,
},
},
],
span: Span {
start: 67927,
end: 68108,
},
}
```
To view the last span:
```
> view span 67927 68108
{
name: clear_everything
modifier: control
keycode: char_l
mode: emacs
event: [
{ send: clearscrollback }
]
}
```
> To view the 2nd to last span:
```
view span 68065 68090
{ send: clearscrollback }
```
> To view the 3rd to last span:
```
view span 68050 68101
[
{ send: clearscrollback }
]
```
## view files
```
> view files
╭────┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│ # │ filename │ start │ end │ size │
├────┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│ 0 │ source │ 0 │ 2 │ 2 │
│ 1 │ Host Environment Variables │ 2 │ 6034 │ 6032 │
│ 2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │ 6034 │ 31236 │ 25202 │
│ 3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu │ 31236 │ 44961 │ 13725 │
│ 4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │ 44961 │ 76134 │ 31173 │
│ 5 │ defs.nu │ 76134 │ 91944 │ 15810 │
│ 6 │ prompt\oh-my.nu │ 91944 │ 111523 │ 19579 │
│ 7 │ weather\get-weather.nu │ 111523 │ 125556 │ 14033 │
│ 8 │ .zoxide.nu │ 125556 │ 127504 │ 1948 │
│ 9 │ source │ 127504 │ 127561 │ 57 │
│ 10 │ entry #1 │ 127561 │ 127585 │ 24 │
│ 11 │ entry #2 │ 127585 │ 127595 │ 10 │
╰────┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
`entry #x` will be each command you type in the repl (i think). so, it
may be good to filter those out sometimes.
```
> view files | where filename !~ entry
╭───┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│ # │ filename │ start │ end │ size │
├───┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│ 0 │ source │ 0 │ 2 │ 2 │
│ 1 │ Host Environment Variables │ 2 │ 6034 │ 6032 │
│ 2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │ 6034 │ 31236 │ 25202 │
│ 3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu │ 31236 │ 44961 │ 13725 │
│ 4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │ 44961 │ 76134 │ 31173 │
│ 5 │ defs.nu │ 76134 │ 91944 │ 15810 │
│ 6 │ prompt\oh-my.nu │ 91944 │ 111523 │ 19579 │
│ 7 │ weather\get-weather.nu │ 111523 │ 125556 │ 14033 │
│ 8 │ .zoxide.nu │ 125556 │ 127504 │ 1948 │
│ 9 │ source │ 127504 │ 127561 │ 57 │
╰───┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
# User-Facing Changes
I renamed `view-source` to `view source` just to make a group of
commands. No functionality has changed in `view source`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Added fix for #7981 - Replaced crate serde_ini with rust-ini for package
nu-command/from
# Tests + Formatting
Added a test to support addition of the rust-ini crate.
`cargo test --package nu-command --lib -- formats::from::ini::tests
--nocapture`
Executed all tests.
`cargo test --workspace`
---------
Co-authored-by: Nitin Londhe <nitin.londhe@genmills.com>
# Description
Fixes#7864. Haven't removed redundant code yet; and there's also a
weird visual bug, but I'm not sure if that's the fault of this PR or
just a quirk of how tabling works:
```
/home/gabriel/CodingProjects/nushell〉ping 1.1.1.1 | parse -r '(?P<num>\d+) ttl' 01/27/2023 11:28:31 AM
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 0 │ 1 │
│ 1 │ 2 │
╰───┴─────╯
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 2 │ 3 │
╰───┴─────╯
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 3 │ 4 │
│ 4 │ 5 │
╰───┴─────╯
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 5 │ 6 │
│ 6 │ 7 │
╰───┴─────╯
^C
/home/gabriel/CodingProjects/nushell〉 01/27/2023 11:28:59 AM
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, we can't provide examples for plugin commands, this pr would
make it possible
# User-Facing Changes
Take plugin `nu-example-1` as example:
```
❯ nu-example-1 -h
PluginSignature test 1 for plugin. Returns Value::Nothing
Usage:
> nu-example-1 {flags} <a> <b> (opt) ...(rest)
Flags:
-h, --help - Display the help message for this command
-f, --flag - a flag for the signature
-n, --named <String> - named string
Parameters:
a <int>: required integer value
b <string>: required string value
(optional) opt <int>: Optional number
...rest <string>: rest value string
Examples:
running example with an int value and string value
> nu-example-1 3 bb
```
The examples session is newly added.
## Basic idea behind these changes
when nushell query plugin signatures, plugin just returns it's signature
without any examples, so nushell have no idea about the examples of
plugin commands.
To adding the feature, we just making plugin returns it's signature with
examples.
Before:
```
1. get signature
---------------->
Nushell ------------------ Plugin
<-----------------
2. returns Vec<Signature>
```
After:
```
1. get signature
---------------->
Nushell ------------------ Plugin
<-----------------
2. returns Vec<PluginSignature>
```
When writing plugin signature to $nu.plugin-path:
Serialize `<PluginSignature>` rather than `<Signature>`, which would
enable us to serialize examples to `$nu.plugin-path`
## Shortcoming
It's a breaking changes because `Plugin::signature` is changed, and it
requires plugin authors to change their code for new signatures.
Fortunally it should be easy to change, for rust based plugin, we just
need to make a global replace from word `Signature` to word
`PluginSignature` in their plugin project.
Our content of plugin-path is really large, if one plugin have many
examples, it'd results to larger body of $nu.plugin-path, which is not
really scale. A solution would be save register information in other
binary formats rather than `json`. But I think it'd be another story.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR tries to resolve the overloading issue by going back to our
original naming convention for dataframes. So, this PR renames all
dataframe commands with a prefix of `dfr`. Some commands like `open-df`
were renamed to `dfr open` and things like `into df` were renamed `dfr
into-df`. I'm sure we can optimize naming a bit, but it seems to compile
now.
# User-Facing Changes
All dataframe commands are prefixed with dfr.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Hi there,
The case which was presented must be addressed.
But I did not test it properly...
I'd encourage you to do so.
Take care.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
I factorized the HTTP client from HTTP Post and HTTP Get into a common
file, in order to reduce the code duplication. This PR has to be looked
commit by commit.
# User-Facing Changes
A new option has been to HTTP Get: `--insecure`. This option was already
available for HTTP Post command.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR is an incremental improvement to `ls` when it encounters
'illegal' file paths on Windows. Related:
https://github.com/nushell/nushell/issues/7869
## Context
We have trouble with filenames that Windows doesn't like, for example
[files with a `.` at the end of their
name](https://learn.microsoft.com/en-us/windows/win32/fileio/naming-a-file#naming-conventions).
To make a long story short, the Rust stdlib and several Win32 APIs will
choke if asked to do something with an illegal filepath. This is a
problem because files with illegal names can be created via other means
(like `touch foo.` in MINGW bash).
Previously `ls` would fail completely in a directory with a bad file,
which isn't great. After this PR, bad files get included in `ls` results
but without any metadata columns. This is not quite where we want to be
— eventually we want to be able to display file metadata for _all_ files
(even naughty ones) — but it's an improvement on the status quo.
### Before
### After
## Future work
Try the workarounds @ChrisDenton suggested:
https://github.com/nushell/nushell/issues/7869#issuecomment-1405977221
Some info on verbatim paths:
https://users.rust-lang.org/t/understanding-windows-paths/58583
## Testing
I tried to write a test for this, but it looks like our testing sandbox
can't create files with illegal filenames.😔 Here's the code in case it
proves useful someday:
```rust
/// Windows doesn't like certain file names, like file names ending with a period:
/// https://learn.microsoft.com/en-us/windows/win32/fileio/naming-a-file#naming-conventions
/// However, those files can still be created with tools like MINGW bash.
/// We may not be able to get full metadata for those files, but we should test that we can at least include them in ls results
#[test]
#[cfg(windows)]
fn can_list_illegal_files() {
Playground::setup("ls_test_all_columns", |dirs, sandbox| {
sandbox.with_files(vec![
EmptyFile("foo"),
EmptyFile("bar."),
EmptyFile("baz"),
]);
let actual = nu!(
cwd: dirs.test(),
"ls | length"
);
assert_eq!(actual.out, "3");
let actual = nu!(
cwd: dirs.test(),
"ls"
);
assert_eq!(actual.out, "1");
let actual = nu!(
cwd: dirs.test(),
"ls | where {|f| $f.name | str ends-with 'bar.'} | length"
);
assert_eq!(actual.out, "1");
})
}
```
# Description
Fix#7953
Fix flags on `du` which should be positive and added some tests.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR will help report a bad date that can't be converted where the
error message says `* Unable to parse datetime`. This is helpful when
you're converting a big table and it fails somewhere that you really
can't see. I put it in `[]` so that when it's null, you can see that
there should be something there.
Before:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)
× Unable to parse datetime
╭─[entry #1:1:1]
1 │ 'Tue 1 0' | into datetime
· ────┬────
· ╰── datetime parsing failed
╰────
help: Examples of supported inputs:
* "5 pm"
* "2020/12/4"
* "2020.12.04 22:10 +2"
* "2020-04-12 22:10:57 +02:00"
* "2020-04-12T22:10:57.213231+02:00"
* "Tue, 1 Jul 2003 10:52:37 +0200"
```
After:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)
× Unable to parse datetime: [Tue 1 0].
╭─[entry #4:1:1]
1 │ 'Tue 1 0' | into datetime
· ────┬────
· ╰── datetime parsing failed
╰────
help: Examples of supported inputs:
* "5 pm"
* "2020/12/4"
* "2020.12.04 22:10 +2"
* "2020-04-12 22:10:57 +02:00"
* "2020-04-12T22:10:57.213231+02:00"
* "Tue, 1 Jul 2003 10:52:37 +0200"
```
# User-Facing Changes
New format for the error message.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Added fix for #7970 - Upgraded toml crate version from version from
0.5.8 to 0.7.1 for package nu-command
# Tests + Formatting
Added two tests to support the toml upgrade.
- `cargo test --package nu-command --lib -- formats::from::toml::tests
--nocapture`
Executed all tests.
- `cargo test --workspace`
---------
Co-authored-by: Nitin Londhe <nitin.londhe@genmills.com>
# Description
I just updated a few examples linked to math commands.
I used the character of pi where possible, and I updated one example
since the example was misleading IMO (for the tau command).
# User-Facing Changes
Only examples have been updated, there is no real user changes.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Functionality added by @nabacg in #7961 already
h/t @YuriGeinishO for the example in #7933Closes#7933
# User-Facing Changes
None
# Tests + Formatting
+1 end to end example
# Description
`help <keyword>` will now search for `<keyword>` in aliases first, then
commands. This matches the way the parser resolves aliases before
commands.
# User-Facing Changes
Not significant
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
I opened this PR to unify the run command method. It's mainly to improve
consistency across the tree.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fix for #7933. I've read through code and found the obvious difference
between them, where `each` command calls eval_with_early_return
e89e734ca2/crates/nu-command/src/filters/each.rs (L158),
while `reduce` command uses eval_block
e89e734ca2/crates/nu-command/src/filters/reduce.rs (L143)
That simple change seems to resolve the problem.
# User-Facing Changes
Allows the use of `return` in reduce closures, as per example in #7933
description. Arguably it's restoring consistency, than changing user
interface.
```
[1, 2] | reduce --fold null { |it, state|
::: if $it == 1 {
::: return 10
::: }
::: return ($it * $state)
::: }
20
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(cargo fmt --all applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Remove `--numbered` from ~~`for`~~, `each`, `par-each`, `reduce` and
`each while`. These all provide indexes (numbering) via the optional
second param to their closures.
EDIT: Closes#6986.
# User-Facing Changes
Every command that had `--numbered` listed as "deprecated" in their help
docs is affected.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This cleans up the `registry query` output so that it's more usable.
Before:
After:
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7874
It's because `do -i` doesn't handles `Pipeline::ListStream`
data(especially there is Value::Error inside the stream)
To fix it, we need to iterate through `ListStream`, check if there is
`Value::Error`. If so, just returns `Pipeline::empty()`
# User-Facing Changes
```
help commands | find arg | get search_terms | do -i { ansi strip }
```
No longer raises error.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Use the `use_ansi_coloring` configuration point to decide whether the
output will have colors, where possible.
Related: https://github.com/nushell/nushell/issues/7676
- [x] `grid -c`
- [x] `perf()`
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7301.
# User-Facing Changes
`return` can now be used in scripts without explicit `def main`.
# Tests + Formatting
Don't forget to add tests that cover your changes. (I'm not sure how to
test this.)
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#7693
On `cp` commands there were two error which pass error message with
invalid detail about source and destination files . there error were for
Not exist file and Permission denied .
Examples:
Before :
Copy `source_file_valid` to `destination_invalid_dir` throw this error ;
`copy file "/source_file_valid" failed: No such file or directory (os
error 2) `
After this PR it will throw this if destination will be invalid :
`copying to destination "/destination_invalid_dir" failed: No such file
or directory (os error 2) `
it was for Permission denied too .
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Fixes: #7828
We delegate to `save` command to finish redirection, then if it runs to
success, the relative exit code is set to 0. To fix it, in redirection
context, we take exit_code stream before sending it to `save` command,
than manually returns `PipelineData::ExternalStream` to make nushell set
relative code properly.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Avoids duplication of `windows` crate and friends as it updates to the
most recent `windows 0.44` version.
# User-Facing Changes
None intended
# Description
Lint: `clippy::uninlined_format_args`
More readable in most situations.
(May be slightly confusing for modifier format strings
https://doc.rust-lang.org/std/fmt/index.html#formatting-parameters)
Alternative to #7865
# User-Facing Changes
None intended
# Tests + Formatting
(Ran `cargo +stable clippy --fix --workspace -- -A clippy::all -D
clippy::uninlined_format_args` to achieve this. Depends on Rust `1.67`)
# Description
Just a couple clippy-recommended simplifications.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7886.
```
/home/gabriel/CodingProjects/nushell〉'A|B|C' | parse -r '(\w)\|(\w)\|(\w)' 01/29/2023 01:08:29 PM
╭───┬──────────┬──────────┬──────────╮
│ # │ capture0 │ capture1 │ capture2 │
├───┼──────────┼──────────┼──────────┤
│ 0 │ A │ B │ C │
╰───┴──────────┴──────────┴──────────╯
```
# User-Facing Changes
Columns automatically named by `parse -r` are now 0-indexec and
uncapitalised.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Relative:
`https://github.com/nushell/nushell/pull/7889#issuecomment-1407503567`
Make `search_terms` return empty string rather than nothing, so some
other command can handle it better
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes: #7841
# User-Facing Changes
new complete doc:
```
Complete the external piped in, collecting outputs and exit code
To collect stderr messages and exit_code, external piped in need to wrapped with `do`
Usage:
> complete
Flags:
-h, --help - Display the help message for this command
Signatures:
<any> | complete -> <record>
Examples:
Run the external completion
> ^external arg1 | complete
Run external completion, collects stderr and exit_code
> do { ^external arg1 } | complete
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
I tackled some of the disabled `FIXME`/`#[ignore]` tests. Most were
straightforward to re-enable, and a few of them did not deserve to be
re-enabled.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
I noticed that [it's pretty easy to name threads in
Rust](https://doc.rust-lang.org/std/thread/#naming-threads). We might as
well do this; it's a nice quality of life improvement when you're
profiling something and the developers took the time to give threads
names.
Also added/cleaned up some comments while I was in the area.
# Description
While investigating `do --ignore-errors` issue, just found that
`ansi_strip` command using a custom `operate` function(which is not
needed), this pr is just a refactor
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Add flags for filtering the output of `glob` by file type. I find myself
occasionally wanting to do this, and getting a file's
[file_type](https://docs.rs/wax/latest/wax/struct.WalkEntry.html#method.file_type)
is presumably fast to do as it doesn't have to go through the fallible
metadata method.
The design of the signature does concern me; it's not as readable as a
filter or "include" type list would be. They have to be filtered one by
one, which can be annoying if you only want files `-D -S`, or only want
folders `-F -S`, or only want symlinks `--butwhy?`. I considered
SyntaxShape::Keyword for this but I'll just defer to comments on this PR
if they pop up.
I'd also like to bring up performance since including these flags
technically incurs a `.filter` penalty on all glob calls, which could be
optimized out if we added a branch for the no-filters case. But in
reality I'd expect the file system to be the bottleneck and the flags to
be pretty branch predictor friendly, so eh
# User-Facing Changes
Three new flags when using `glob` and a slightly more cluttered help
page. No breaking changes, I hope.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds a `number` command that will enumerate the input, and add an
`index` and `item` record for each item. The `index` is the number of
the item in the input stream, and `item` is the original value of the
item.
```
> ls | number | get 14
╭───────┬────────────────────────────╮
│ index │ 14 │
│ │ ╭──────────┬─────────────╮ │
│ item │ │ name │ crates │ │
│ │ │ type │ dir │ │
│ │ │ size │ 832 B │ │
│ │ │ modified │ 2 weeks ago │ │
│ │ ╰──────────┴─────────────╯ │
╰───────┴────────────────────────────╯
```
# User-Facing Changes
This adds a `number` command.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Some general cleanup of `cd.rs`; the permission checking code was a
little hard to follow. Reworded comments and variable names,
reorganized+renamed the module used for Unix file permissions.
# Description
This PR bumps the required rust version to 1.66.1.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
fix#7858
Once again we here 😞
~~I am thinking is there some files with not flat structure we could use
to test table -e?
I mean it is clear it was a while ago were we had to create at least
some tests.
Do you have anything in mind (or maybe commands which is consistent
across systems)?~~
Take care
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
Relative #7210
Improve doc to clarify current behavior.
To flatten all nested levels, we can use the following custom
command(maybe making it into our lib):
```
def flatten_all_nested [input_table: any] {
mut input = $input_table
mut flattened = ($input | flatten --all)
while $input != $flattened {
$input = $flattened
$flattened = ($input | flatten --all)
}
$flattened
}
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7800 .
`to csv` and `to tsv` no longer:
- accept anything but records and tables as input,
- accept lists that are not tables,
- accept tables and records with values that are not primitives (other
lists, tables and records).
# User-Facing Changes
Using `to csv` and `to tsv` on any of inputs mentioned above will result
in `cant_convert` error.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Currently, if you run `do -i { sudo apt upgrade }`, stdin gets swallowed
and doesn't let you respond yes/no to the upgrade question. This PR
fixes that, but runs into https://github.com/nushell/nushell/issues/7205
so the tests fail.
Signed-off-by: Alex Saveau <saveau.alexandre@gmail.com>
# Description
This PR shows the startup time and decreases the banner. This startup
time output can be disabled with the `show_banner: false` setting in the
config. This is the startup in debug mode.
On my mac in release mode
```
Startup Time: 368ms 429µs 83ns
```
On my mac without a config as `nu --config foo --env-config foo`
```
Startup Time: 11ms 663µs 791ns
```
I could really go either way on this. If people don't like this change,
we don't have to merge it.
# User-Facing Changes
Startup Time
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Bumps [rayon](https://github.com/rayon-rs/rayon) from 1.5.3 to 1.6.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rayon-rs/rayon/blob/master/RELEASES.md">rayon's
changelog</a>.</em></p>
<blockquote>
<h1>Release rayon 1.6.1 (2022-12-09)</h1>
<ul>
<li>Simplified <code>par_bridge</code> to only pull one item at a time
from the iterator,
without batching. Threads that are waiting for iterator items will now
block
appropriately rather than spinning CPU. (Thanks <a
href="https://github.com/njaard"><code>@njaard</code></a>!)</li>
<li>Added protection against recursion in <code>par_bridge</code>, so
iterators that also
invoke rayon will not cause mutex recursion deadlocks.</li>
</ul>
<h1>Release rayon-core 1.10.1 (2022-11-18)</h1>
<ul>
<li>Fixed a race condition with threads going to sleep while a broadcast
starts.</li>
</ul>
<h1>Release rayon 1.6.0 / rayon-core 1.10.0 (2022-11-18)</h1>
<ul>
<li>The minimum supported <code>rustc</code> is now 1.56.</li>
<li>The new <code>IndexedParallelIterator::fold_chunks</code> and
<code>fold_chunks_with</code> methods
work like <code>ParallelIterator::fold</code> and <code>fold_with</code>
with fixed-size chunks of
items. This may be useful for predictable batching performance, without
the
allocation overhead of
<code>IndexedParallelIterator::chunks</code>.</li>
<li>New "broadcast" methods run a given function on all
threads in the pool.
These run at a sort of reduced priority after each thread has exhausted
their
local work queue, but before they attempt work-stealing from other
threads.
<ul>
<li>The global <code>broadcast</code> function and
<code>ThreadPool::broadcast</code> method will
block until completion, returning a <code>Vec</code> of all return
values.</li>
<li>The global <code>spawn_broadcast</code> function and methods on
<code>ThreadPool</code>, <code>Scope</code>,
and <code>ScopeFifo</code> will run detached, without blocking the
current thread.</li>
</ul>
</li>
<li>Panicking methods now use <code>#[track_caller]</code> to report the
caller's location.</li>
<li>Fixed a truncated length in <code>vec::Drain</code> when given an
empty range.</li>
</ul>
<h2>Contributors</h2>
<p>Thanks to all of the contributors for this release!</p>
<ul>
<li><a href="https://github.com/cuviper"><code>@cuviper</code></a></li>
<li><a
href="https://github.com/idanmuze"><code>@idanmuze</code></a></li>
<li><a href="https://github.com/JoeyBF"><code>@JoeyBF</code></a></li>
<li><a
href="https://github.com/JustForFun88"><code>@JustForFun88</code></a></li>
<li><a
href="https://github.com/kianmeng"><code>@kianmeng</code></a></li>
<li><a
href="https://github.com/kornelski"><code>@kornelski</code></a></li>
<li><a
href="https://github.com/ritchie46"><code>@ritchie46</code></a></li>
<li><a
href="https://github.com/ryanrussell"><code>@ryanrussell</code></a></li>
<li><a
href="https://github.com/steffahn"><code>@steffahn</code></a></li>
<li><a
href="https://github.com/TheIronBorn"><code>@TheIronBorn</code></a></li>
<li><a
href="https://github.com/willcrozi"><code>@willcrozi</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="401678ee55"><code>401678e</code></a>
Merge <a
href="https://github-redirect.dependabot.com/rayon-rs/rayon/issues/709">#709</a></li>
<li><a
href="33e9843413"><code>33e9843</code></a>
Release rayon 1.2.1 / rayon-core 1.6.1</li>
<li><a
href="dd874ac5d4"><code>dd874ac</code></a>
Bump crate versions and dependencies</li>
<li><a
href="0c6338d267"><code>0c6338d</code></a>
Reduce Option complexity in demo cpu_time</li>
<li><a
href="be99e500bf"><code>be99e50</code></a>
cargo fmt</li>
<li><a
href="9b4d9798de"><code>9b4d979</code></a>
Avoid mem::uninitialized in the demo cpu_time</li>
<li><a
href="5a466434ab"><code>5a46643</code></a>
Avoid mem::uninitialized in par_sort_unstable</li>
<li><a
href="73b1061a23"><code>73b1061</code></a>
Merge <a
href="https://github-redirect.dependabot.com/rayon-rs/rayon/issues/705">#705</a></li>
<li><a
href="54c0b0dc0c"><code>54c0b0d</code></a>
Make sure that compat-Cargo.lock is fresh</li>
<li><a
href="4fd13b0334"><code>4fd13b0</code></a>
Regenerate compat-Cargo.lock</li>
<li>Additional commits viewable in <a
href="https://github.com/rayon-rs/rayon/compare/v1.5.3...rayon-core-v1.6.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Closes#7762. See issue for motivation.
# User-Facing Changes
Something like this is now possible without having to split this into 2
commands:
```
fetch "https://www.gutenberg.org/files/11/11-0.txt" | benchmark { str downcase | split words | uniq -c | sort-by count --reverse | first 10 }
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Updated description by @rgwood
This PR changes `fetch` to `http get` and `post` to `http post`. `fetch`
and `post` are now deprecated. [I surveyed people on
Discord](https://discord.com/channels/601130461678272522/601130461678272524/1065706282566307910)
and users strongly approved of this change.
# Original Description
This PR is related to #2741 and my first pull request in rust :)
Implemented a new http mod to better http support and alias `fetch` and
`post` commands to `http get` and `http post` respectively.
# User-Facing Changes
Users will be able to use HTTP method via http command, for example
``` shell
> http get "https://www.example.com"
<!doctype html>
<html>
...
```
# Description
This PR fixes the signature display when running `help commands`. Before
this PR, there were leading spaces in the signatures column. Now,
they're left aligned for a cleaner look.
Before:
After:
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
BEFORE:
```
Subcommands:
str camel-case - Convert a string to camelCase
str capitalize - Capitalize first letter of text
str collect - 'str collect' is deprecated. Please use 'str join' instead.
str contains - Checks if string input contains a substring
str distance - Compare two strings and return the edit distance/Levenshtein distance
str downcase - Make text lowercase
str ends-with - Check if an input ends with a string
str find-replace - Deprecated command
str index-of - Returns start index of first occurrence of string in input, or -1 if no match
str join - Concatenate multiple strings into a single string, with an optional separator between each
str kebab-case - Convert a string to kebab-case
str length - Output the length of any strings in the pipeline
str lpad - Left-pad a string to a specific length
str pascal-case - Convert a string to PascalCase
str replace - Find and replace text
str reverse - Reverse every string in the pipeline
str rpad - Right-pad a string to a specific length
str screaming-snake-case - Convert a string to SCREAMING_SNAKE_CASE
str snake-case - Convert a string to snake_case
str starts-with - Check if an input starts with a string
str substring - Get part of a string. Note that the start is included but the end is excluded, and that the first character of a string is index 0.
str title-case - Convert a string to Title Case
str to-datetime - Deprecated command
str to-decimal - Deprecated command
str to-int - Deprecated command
str trim - Trim whitespace or specific character
str upcase - Make text uppercase
```
AFTER:
```
Subcommands:
str camel-case - Convert a string to camelCase
str capitalize - Capitalize first letter of text
str contains - Checks if string input contains a substring
str distance - Compare two strings and return the edit distance/Levenshtein distance
str downcase - Make text lowercase
str ends-with - Check if an input ends with a string
str index-of - Returns start index of first occurrence of string in input, or -1 if no match
str join - Concatenate multiple strings into a single string, with an optional separator between each
str kebab-case - Convert a string to kebab-case
str length - Output the length of any strings in the pipeline
str lpad - Left-pad a string to a specific length
str pascal-case - Convert a string to PascalCase
str replace - Find and replace text
str reverse - Reverse every string in the pipeline
str rpad - Right-pad a string to a specific length
str screaming-snake-case - Convert a string to SCREAMING_SNAKE_CASE
str snake-case - Convert a string to snake_case
str starts-with - Check if an input starts with a string
str substring - Get part of a string. Note that the start is included but the end is excluded, and that the first character of a string is index 0.
str title-case - Convert a string to Title Case
str trim - Trim whitespace or specific character
str upcase - Make text uppercase
```
The deprecated subcommands still exist, but are no longer listed in
`help` for the containing command.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7774. The functionality should be the same as feeding all
`PipelineDate::Value(Value::String(_,_),_)` into `lines` before putting
it into `find`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is an attempt to implement a new `Value::LazyRecord` variant for
performance reasons.
`LazyRecord` is like a regular `Record`, but it's possible to access
individual columns without evaluating other columns. I've implemented
`LazyRecord` for the special `$nu` variable; accessing `$nu` is
relatively slow because of all the information in `scope`, and [`$nu`
accounts for about 2/3 of Nu's startup time on
Linux](https://github.com/nushell/nushell/issues/6677#issuecomment-1364618122).
### Benchmarks
I ran some benchmarks on my desktop (Linux, 12900K) and the results are
very pleasing.
Nu's time to start up and run a command (`cargo build --release;
hyperfine 'target/release/nu -c "echo \"Hello, world!\""' --shell=none
--warmup 10`) goes from **8.8ms to 3.2ms, about 2.8x faster**.
Tests are also much faster! Running `cargo nextest` (with our very slow
`proptest` tests disabled) goes from **7.2s to 4.4s (1.6x faster)**,
because most tests involve launching a new instance of Nu.
### Design (updated)
I've added a new `LazyRecord` trait and added a `Value` variant wrapping
those trait objects, much like `CustomValue`. `LazyRecord`
implementations must implement these 2 functions:
```rust
// All column names
fn column_names(&self) -> Vec<&'static str>;
// Get 1 specific column value
fn get_column_value(&self, column: &str) -> Result<Value, ShellError>;
```
### Serializability
`Value` variants must implement `Serializable` and `Deserializable`, which poses some problems because I want to use unserializable things like `EngineState` in `LazyRecord`s. To work around this, I basically lie to the type system:
1. Add `#[typetag::serde(tag = "type")]` to `LazyRecord` to make it serializable
2. Any unserializable fields in `LazyRecord` implementations get marked with `#[serde(skip)]`
3. At the point where a `LazyRecord` normally would get serialized and sent to a plugin, I instead collect it into a regular `Value::Record` (which can be serialized)
Previously the group check was only for the current users gid, now we
check against all the users groups.
# Description
Currently when using the `cd` command to enter a directory there was
only a check against the current user id, and exact current group id,
meaning if a directory had a group permission and that group wasn't the
users group it was effectively ignored.
The fix simply implements a check through all the users current groups.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Nothing changed, just fix some typos
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
This PR updates the `sqlparser` dependency and updates code to the
latest api changes.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes: #7590
# User-Facing Changes
So the following command
```
1..100 | each { |i| sleep 400ms; $i} | save --raw -f output.txt
```
Will stream data to `output.txt`
But I'm note sure how to make a proper test for it, so I leave with no
new test cases..
Also rename from `string_binary_list_value_to_bytes ` to
`value_to_bytes` to accepts more Value type.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Refactor command: "to url" in: "to url query". Changed usage sentence.
Closes: #7495
# User-Facing Changes
Now we get a query string from a record or table by using command: "to
url query".
```
> help to url query
Convert record or table into query string applying percent-encoding.
Usage:
> to url query
Flags:
-h, --help - Display the help message for this command
Signatures:
<record> | to url query -> <string>
<table> | to url query -> <string>
Examples:
Outputs a query string representing the contents of this record
> { mode:normal userid:31415 } | to url query
Outputs a query string representing the contents of this 1-row table
> [[foo bar]; ["1" "2"]] | to url query
Outputs a query string representing the contents of this record
> {a:"AT&T", b: "AT T"} | to url query
```
# Tests + Formatting
Added this test:
```
Example {
description: "Outputs a query string representing the contents of this record",
example: r#"{a:"AT&T", b: "AT T"} | to url query"#,
result: Some(Value::test_string("a=AT%26T&b=AT+T")),
},
```
to ensure percent-encoding.
# After Submitting
If PR is accepted I'll open another PR on documentation to notify
changes on
[this.](https://github.com/nushell/nushell.github.io/blob/main/book/commands/to_url.md)
I have changed `assert!(a == b)` calls to `assert_eq!(a, b)`, which give
better error messages. Similarly for `assert!(a != b)` and
`assert_ne!(a, b)`. Basically all instances were comparing primitives
(string slices or integers), so there is no loss of generality from
special-case macros,
I have also fixed a number of typos in comments, variable names, and a
few user-facing messages.
Closes#6337 and #5366. Prior to this PR, when "shelling out" to cmd.exe
on Windows we were not trimming quotes correctly:
```bash
〉^echo "foo"
\"foo\"
```
After this change, we do:
```bash
〉^echo "foo"
foo
```
### Breaking Change
I ended up removing `dir` from the list of supported cmd.exe internal
commands as part of this PR.
For this PR, I extracted the argument-cleaning-and-expanding code from
`spawn_simple_command()` for reuse in `spawn_cmd_command()`. This means
that we now expand globs, which broke some tests for the `dir` cmd.exe
internal command.
I probably could have kept the tests working, but... tbh, I don't think
it's worth it. I don't want to make the `cmd.exe` functionality any more
complicated than it already is, and calling `dir` from Nu is always
going to be weird+hacky compared to `ls`.
# Description
As title
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR updates the base64 crate, which has changed significantly, so
all the base64 implementations had to be changed too. Tests pass. I hope
that's enough.
# User-Facing Changes
None, except added a new character encoding imap-mutf7 as mutf7.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
In bash when a program crashes, it prints the reason for what happened:
```
$ ./division_by_zero
Floating point exception (core dumped)
$ ./segfault
Segmentation fault (core dumped)
```
Nushell always prints the same thing in this case:
```
> ./division_by_zero
nushell: oops, process './division_by_zero' core dumped
Error: nu:🐚:external_command (link)
# etc..
```
This PR adds more detailed error printing, like in bash:
```
> ./division_by_zero
Floating point exception: oops, process './division_by_zero' core dumped
Error: nu:🐚:external_command (link)
# etc..
```
I made this message format as an example:
```
Floating point exception: oops, process './division_by_zero' core dumped
```
Instead of `nushell:` it writes a meaningful message, but I can change
this format as per the suggestions.
I tested the change only on linux, but it should work on other unix
systems.
# User-Facing Changes
The error message only.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Closes#7514.
* For both `encode` and `decode`: add a special case allowing `utf16` as
a valid alias for `utf-16` (just as `utf-8` has `utf8`).
* For `encode` , make it an error when encodings_rs replaces characters
outside the given encoding with HTML entities
* For `encode` , add `-i`/`--ignore-errors` flag to bring back this
behaviour.
Note: `--ignore-errors` does NOT ignore the error for using a wrong
encoding label like `uft8`
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Refers to: [5093](https://github.com/nushell/nushell/issues/5093)
# Tests
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# Description
Closes: #7696
# User-Facing Changes
Before:
```
❯ 'temp/aa' | path exists
Error: nu:🐚:io_error (link)
× I/O error
help: Os { code: 13, kind: PermissionDenied, message: "Permission denied" }
```
After:
```
❯ 'temp/aa' | path exists
Error: nu:🐚:io_error (link)
× I/O error
╭─[entry #42:1:1]
1 │ 'temp/aa' | path exists
· ────┬────
· ╰── Permission denied (os error 13)
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title
Fixes: #7673Fixes: #4205
Also possiblely fixes: https://github.com/nushell/nushell/issues/6993
# User-Facing Changes
Before:
```
> ^echo "~"
/Users/ttt
```
After:
```
> ^echo "~"
~
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fix generated doc for `explore` commands, and resolve the static site
build error:
https://github.com/nushell/nushell.github.io/actions/runs/3889029668/jobs/6636921318
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
I implemented the status bar we talk about yesterday. The idea was
inspired by the progress bar of `wget`.
I decided to go for the second suggestion by `@Reilly`
> 2. add an Option<usize> or whatever to RawStream (and ListStream?) for
situations where you do know the length ahead of time
For now only works with the command `save` but after the approve of this
PR we can see how we can implement it on commands like `cp` and `mv`
When using `fetch` nushell will check if there is any `content-length`
attribute in the request header. If so, then `fetch` will send it
through the new `Option` variable in the `RawStream` to the `save`.
If we know the total size we show the progress bar
but if we don't then we just show the stats like: data already saved,
bytes per second, and time lapse.
Please let me know If I need to make any changes and I will be happy to
do it.
# User-Facing Changes
A new flag (`--progress` `-p`) was added to the `save` command
Examples:
```nu
fetch https://github.com/torvalds/linux/archive/refs/heads/master.zip | save --progress -f main.zip
fetch https://releases.ubuntu.com/22.04.1/ubuntu-22.04.1-desktop-amd64.iso | save --progress -f main.zip
open main.zip --raw | save --progress main.copy
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
-
I am getting some errors and its weird because the errors are showing up
in files i haven't touch. Is this normal?
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
See title.
# User-Facing Changes
See title.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
src/main.rs has a dependency on BufferedReader
which is currently located in nu_command.
I am moving BufferedReader to a more relevant
location (crate) which will allow / eliminate main's dependency
on nu_command in a benchmark / testing environment...
now that @rgwood has landed benches I want
to start experimenting with benchmarks related
to the parser.
For benchmark purposes when dealing with parsing
you need a very simple set of commands that show
how well the parser is doing, in other words
just the core commands... Not all of nu_command...
Having a smaller nu binary when running the benchmark CI
would enable building nushell quickly, yet still show us
how well the parser is performing...
Once this PR lands the only dependency main will have
on nu_command is create_default_context ---
meaning for benchmark purposes we can swap in a tiny
crate of commands instead of the gigantic nu_command
which has its "own" create_default_context...
It will also enable other crates going forward to
use BufferedReader. Right now it is not accessible
to other lower level crates because it is located in a
"top of the stack crate".
# Description
This commit makes the `user` parameter optional in the `fetch` command.
Previously when attempting to _only_ pass a `password`, the command
would ignore authentication. Now when a `user` is not supplied, but a
`password` is, an empty user is implied.
Before this PR, consider the following:
```nushell
fetch -password "mypassword" $url
```
This would result in the `password` parameter being ignored entirely.
Now, with changes made in this PR, consider the same code snippet as
above. The following HTTP header will be used:
```
Authentication: Basic <base64_encode(":{password}")>
```
Note that the `user` field is implied as empty if one is not supplied
when `password` is.
# User-Facing Changes
* `fetch` now supports `password`-only authentication, using an empty
`user` if one is not supplied.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Reasoning:
Most missing math commands are implemented with #7258.
The `meval` crate itself declares that it doesn't strive to stringent
standards (https://docs.rs/meval/latest/meval/#related-projects).
For example no particular special casing or transformations are
performed to ensure numerical stability. It uses the same rust `std`
library functions we use or have access to (and `f64`).
While the command call syntax in nushell may be a bit more verbose,
having a single source of truth and common commands is beneficial.
Furthermore the `math` commands can themselves implement broadcasting
over lists (or table columns).
Closes#7073
Removed dependencies:
- `meval`
- `nom 1.2.4` (duplicate)
User-Facing Changes:
Scripts using `math eval` will break.
We remove a further `eval` like behavior to get results through runtime evaluation (albeit limited in scope)
Tests:
- Updated tests that internally used `math eval`.
- Removed one test that primarily used `math eval` to obtain a result from `str join`
# Description
Refactored the quadratic complexity on `uniq` to use a HashMap, as key I
converted the Value to string.
I tried to use the HashableValue, but it looks it is not very developed
yet and it was getting more complex and difficult.
This improves performance on large data sets.
Fixes https://github.com/nushell/nushell/issues/7477
# Tests + Formatting
```
> let data = fetch "https://home.treasury.gov/system/files/276/yield-curve-rates-1990-2021.csv"
> $data | uniq
```
it keeps original attribute order in Records:
```
> [ {b:2, a:1} {a:1, b:2} ] | uniq
╭───┬───┬───╮
│ # │ b │ a │
├───┼───┼───┤
│ 0 │ 2 │ 1 │
╰───┴───┴───╯
```
# Description
Closes#7554
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Reilly Wood <26268125+rgwood@users.noreply.github.com>
Closes#7581.
After this PR, `describe` shows `(stream)` next to input that arrived at
`describe` as a `ListStream`:
```bash
〉ls | describe
table<name: string, type: string, size: filesize, modified: date> (stream)
〉[1 2 3] | each {|i| $i} | describe
list<int> (stream)
```
`describe` must collect all items of the stream to display type
information for lists and tables. If users need to avoid collecting
input, they can use the `-n`/`--no-collect` flag:
```bash
〉[1 2 3] | each {|i| $i} | describe --no-collect
stream
```
I noticed that the help for the `url` command was confusing (it wasn't
clear that `url` is just a base command that does nothing itself) and
the input type was also wrong. Fixed.
Before:
```bash
〉help url
Apply url function.
Search terms: network, parse
Usage:
> url
Subcommands:
url parse - Parses a url
Flags:
-h, --help - Display the help message for this command
Signatures:
<string> | url -> <string>
```
After:
```bash
〉help url
Various commands for working with URLs
You must use one of the following subcommands. Using this command as-is will only produce this help message.
Search terms: network, parse
Usage:
> url
Subcommands:
url parse - Parses a url
Flags:
-h, --help - Display the help message for this command
Signatures:
<nothing> | url -> <string>
```
# Description
Fixes#7546 's request. I'm unsure, so hopefully someone in charge of
design can chip in.
# User-Facing Changes
`open` now opens directories in the default file manager.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
#7623 causes a break on PATH convertion, this pr is going to revert
`prepend` and `append` bahavior.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This closes#7498, as well as fixes an issue reported in
https://github.com/nushell/nushell/pull/7002#issuecomment-1368340773
BEFORE:
```
〉[{foo: 'bar'} {}] | get foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #5:1:1]
1 │ [{foo: 'bar'} {}] | get foo
· ────────┬──────── ─┬─
· │ ╰── value originates here
· ╰── cannot find column 'Empty cell'
╰────
〉[{foo: 'bar'} {}].foo
╭───┬─────╮
│ 0 │ bar │
│ 1 │ │
╰───┴─────╯
```
AFTER:
```
〉[{foo: 'bar'} {}] | get foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #1:1:1]
1 │ [{foo: 'bar'} {}] | get foo
· ─┬ ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
〉[{foo: 'bar'} {}].foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #3:1:1]
1 │ [{foo: 'bar'} {}].foo
· ─┬ ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
```
EDIT: This also changes the semantics of `get`/`select` `-i` somewhat.
I've decided to leave it like this because it works more intuitively
with `default` and `compact`.
BEFORE:
```
〉[{a:1} {b:2} {a:3}] | select -i foo | to nuon
null
```
AFTER:
```
〉[{a:1} {b:2} {a:3}] | select -i foo | to nuon
[[foo]; [null], [null], [null]]
```
# User-Facing Changes
See above. EDIT: the issue with holes in cases like ` [{foo: 'bar'}
{}].foo.0` versus ` [{foo: 'bar'} {}].0.foo` has been resolved.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
