Commit Graph

6933 Commits

Author SHA1 Message Date
JT
2f8a52d256
Switch let/let-env family to init with math expressions (#8545)
# Description

This is an experiment to see what switching the `let/let-env` family to
math expressions for initialisers would be like.

# User-Facing Changes

This would require any commands you call from `let x = <command here>`
(and similar family) to call the command in parentheses. `let x = (foo)`
to call `foo`.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-23 09:14:10 +13:00
Jérémy Audiger
0f4a073eaf
Remove once_cell dependency from nu-test-support create. (#8568)
I was looking where we could remove the usage of once-cell dependency.
As for now, I only found one place. Not a terrible improvement, but at
least, it removes a dependency nu-test-support crate.

Relies on `Mutex::new` constified in Rust 1.63.0
2023-03-22 19:36:52 +01:00
Antoine Stevan
626410b2aa
FEATURE: write better errors for error make and complete the doc (#8511)
# Description
this PR
- refactors `ErrorMake::run` to avoid duplicate branches depending on
the value of `--unspanned`
- completes the examples
1. show a really simple `error make` call, without any command
definition
  2. show a complete error format with all possible fields
3. the command definition but with indentation and slightly better
description
- adds results to the first two examples
- gives meaningful error messages for all known "bad" error formats,
using the span of the error format or the span of `$format.label` to
better explain why the format is bad

# User-Facing Changes
users have now the following help
```bash
Examples:
  Create a simple custom error
  > error make {msg: "my custom error message"}

  Create a more complex custom error
  > error make {
        msg: "my custom error message"
        label: {
            text: "my custom label text"  # not mandatory unless $.label exists
            start: 123  # not mandatory unless $.label.end is set
            end: 456  # not mandatory unless $.label.start is set
        }
    }

  Create a custom error for a custom command that shows the span of the argument
  > def foo [x] {
        let span = (metadata $x).span;
        error make {
            msg: "this is fishy"
            label: {
                text: "fish right here"
                start: $span.start
                end: $span.end
            }
        }
    }
```
and the following error messages when the error format is bad
https://asciinema.org/a/568107 🥳

# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🔴 `cargo test --workspace`
=> the tests do not pass but they do not pass on latest `main` either =>
i should `cargo clean`, but that's an expensive operation on my
machine...

# After Submitting
the documentation would have to be regenerated over on the website
2023-03-22 08:06:47 -05:00
dependabot[bot]
a193b85123
Bump alphanumeric-sort from 1.4.4 to 1.5.0 (#8532) 2023-03-22 13:02:45 +00:00
dependabot[bot]
0f40c44ed2
Bump windows from 0.44.0 to 0.46.0 (#8535) 2023-03-22 13:02:03 +00:00
WindSoilder
cd6f86052d
better error message if plugin name doesn't starts with nu_plugin_ (#8562)
# Description

Fixes: #8548 

# User-Facing Changes
```
❯ register target/debug/formats
Error:
  × Register plugin failed
   ╭─[entry #1:1:1]
 1 │ register target/debug/formats
   ·          ──────────┬─────────
   ·                    ╰── plugin name must starts with nu_plugin_
   ╰────

```
# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-22 07:02:28 -05:00
Steven Xu
b9858ea8f8
fix: set repl_buffer_state to the REPL buffer after the `pre_execut… (#8560)
…ion` hook


# Description

Previously when a `executehostcommand` shortcut calls `commandline`, to
get the current command line, it's incorrectly set to the value of
`executehostcommand` `cmd`.

This fixes the regression (due to #8207), so it's correctly set to
what's in the REPL buffer.

# User-Facing Changes

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-22 06:43:25 -05:00
Antoine Stevan
cb1eefd24a
FIX: expand all the base_paths in std::test_dirs (#8552)
Related to #8525.

# Description

this should close #8528.

# User-Facing Changes
```
$nothing
```

# Tests + Formatting
```
$nothing
```

# After Submitting
```
$nothing
```
2023-03-22 09:50:01 +01:00
Sygmei
a1840e9d20
fix: fixed typo and improved Value TypeMismatch exceptions (#8324)
# Description

This PR aims to improve `TypeMismatch` exception that occurs when
comparing two values with `<`, `>`, `<=` or `>=` operators.

*Before*

![image](https://user-images.githubusercontent.com/3835355/222980803-8cb0f945-5a82-4512-9989-5df0ec4e4969.png)

*After*

![image](https://user-images.githubusercontent.com/3835355/226754903-68e56344-065d-42ee-b184-ab968e91c6de.png)

This PR also bundles a small refactor for histogram forbidden column
names exception, previous implementation forgot a column name in the
message, to avoid this, I'm re-using the same array for checking and
error display

# User-Facing Changes

Not much changes except a better and more readable exception for the
user

# Tests + Formatting

Does not break any tests, formatting passes as well :)
2023-03-22 09:47:40 +01:00
Hörmet Yiltiz
b01cbf82c3
Fix nu build script since for loops are stateful now (#8559)
Need to get back to the src top directory after each `cd`.


# Description

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-22 17:13:07 +13:00
mike
e89c796b41
fix: bytes length example description typo (#8550)
this pr fixes a typo
2023-03-21 11:41:37 -05:00
Antoine Stevan
758351c732
FEATURE: add --raw. --tabs and --indent to to nuon as in to json (#8366)
Should close #7255.

# Description
**TL;DR**: this PR adds `--indent <int>`, `--tabs <int>` and `--raw` to
control a bit more the `string` output of `to nuon`, as done in `to
json` already, the goal being to promote the `NUON` format through easy
to read and formatted output `.nuon` files 😋

### outside of `crates/nu-command/src/formats/to/nuon.rs`
as the signature of `value_to_string` has changed, the single call to it
outside of its module definition has been changed to use default values
=> `value_to_string(&value, Span::unknown(), 0, &None)` in
`crates/nu-command/src/filters/uniq.rs`

### changes to `ToNuon` in `crates/nu-command/src/formats/to/nuon.rs`
- the signature now features `--raw`, `--indent <int>` and `--tabs
<int>`
- the structure of the `run` method is inspired from the one in `to
json`
  - we get the values of the arguments
  - we convert the input to a usable `Value`
- depending on whether the user raised `--raw`, `--indent` or `--tabs`,
we call the conversion to `string` with different values of the
indentation, starting at depth 0
- finally, we return `Ok` or a `ShellError::CantConvert` depending on
the conversion result
- some tool functions
- `get_true_indentation` gives the full indentation => `indent` repeated
`depth` times
- `get_true_separators` gives the line and field separators => a `("\n",
"")` when using some formatting or `("", " ")` when converting as pure
string on a single line

the meat of `nuon.rs` is now the `value_to_string` recursive function:
- takes the depth and the indent string
- adds correct newlines, space separators and indentation to the output
- calls itself with the same indent string but `depth + 1` to increase
the indentation by one level
- i used the `nl`, `idt`, `idt_po` (**i**n**d**en**t** **p**lus **o**ne)
and `idt_pt` (**i**n**d**en**t** **p**lus **t**wo) to make the
`format!`s easier to read

# User-Facing Changes
users can now
- control the amount and nature of NUON string output indentation with
  - `--indent <number of " " per level>`
  - `--tabs <number of "\t" per level>` 
- use the previous behaviour of `to nuon` with the `--raw` option
- have new examples with `help to nuon`

> **Note**
> the priority order of the options is the following
> 1. `--raw`
> 2. `--tabs`
> 3. `--indent`
>
> the default is `--indent 2`

# Tests + Formatting
### new tests
- tests involving the string output of `to nuon`, i.e. tests not of the
form `... | to nuon | from nuon ...`, now use the `to nuon --raw`
command => this is the smallest change to have the tests pass, as the
new `to nuon --raw` is equivalent to the old `to nuon`
- in `crates/nu-command/src/formats/to/nuon.rs`, the previous example
has been replaced with three examples
  - `[1 2 3] | to nuon` to show the default behaviour
  - `[1 2 3] | to nuon --raw` to show the not-formatted output
- a more complex example with `{date: 2000-01-01, data: [1 [2 3] 4.56]}
| to nuon`
  - the result values have been defined and the `examples` tests pass
 
### dev
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🟢 `cargo test --workspace` ~~passes but without
`to_nuon_errs_on_closure`~~ fixed in
0b4fad7eff

# After Submitting
the `to nuon` page would have to be regenerated at some point due to the
new tests
2023-03-20 15:47:18 -05:00
Máté FARKAS
77d33766f1
std lib: extend test runner capabilities (#8499)
I am implementing a nu plugin, and want to unit test that it works well.

# Basic usage (unchanged)


![image](https://user-images.githubusercontent.com/282320/225895139-f1ea0088-22e1-4778-b27e-c1868af48753.png)

# Select the folder to run tests within (subfolders included)


![image](https://user-images.githubusercontent.com/282320/225894283-4c6ac739-afde-44ef-bf7e-362d5118e83f.png)

# Select module to run tests within


![image](https://user-images.githubusercontent.com/282320/225894438-f39690db-955d-4d66-818f-17a179b00c66.png)

# Select test command to run


![image](https://user-images.githubusercontent.com/282320/225894534-edb15b9c-d3ef-4368-9108-2d220ef75dcf.png)

# Complex usage


![image](https://user-images.githubusercontent.com/282320/225894827-03f2e937-3984-4b33-b206-c155c723feac.png)

---------

Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
2023-03-20 18:48:48 +01:00
dependabot[bot]
b0be6c3013
Bump quick-xml from 0.27.1 to 0.28.1 (#8533) 2023-03-20 17:46:28 +00:00
dependabot[bot]
93e5d8edc9
Bump actions-rust-lang/setup-rust-toolchain from 1.4.3 to 1.4.4 (#8536) 2023-03-20 17:28:45 +00:00
dependabot[bot]
9c6bfc0be9
Bump rstest from 0.16.0 to 0.17.0 (#8534) 2023-03-20 17:27:29 +00:00
alesito85
77e73cef66
Ls symlink fix (#8276)
# Description

Fixes #6706.

I took a look at this issue and it seems that the issue is because the
path is canonicalized and thus derives to the target. I've tested it
locally by checking if the path is a symlink and acting accordingly to
not canonicalize it and it seems fine.

In current release if the target is deleted but the symlink remains and
one `ls`'s it, it throws a `directory not found` error. But with the fix
it still shows the symlink (with red background, indicating missing
target).

The change I've applied only triggers when `ls` is done on a symlink, on
all other counts it should basically do the same as before.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

## List existing symlink and target

Current
```
ls a_symlink                                                                                                                                                                                ╭───┬────────┬──────┬──────┬──────────────╮
│ # │  name  │ type │ size │   modified   │
├───┼────────┼──────┼──────┼──────────────┤
│ 0 │ a_file │ file │  0 B │ 20 hours ago │
╰───┴────────┴──────┴──────┴──────────────╯
```
With fix
```
ls a_symlink                                                                                                                                                                                ╭───┬───────────┬─────────┬──────┬──────────────╮
│ # │   name    │  type   │ size │   modified   │
├───┼───────────┼─────────┼──────┼──────────────┤
│ 0 │ a_symlink │ symlink │  6 B │ 20 hours ago │
╰───┴───────────┴─────────┴──────┴──────────────╯
```

## List existing symlink with missing target

Current
```
ls symfile_x                                                                                                                                                                          
Error: nu:🐚:directory_not_found (link)

  × Directory not found
   ╭─[entry #13:1:1]
 1 │ ls symfile_x
   ·    ────┬────
   ·        ╰── directory not found
   ╰────
```

With fix
```
ls symfile_x                                                                                                                                                                          ╭───┬───────────┬─────────┬──────┬─────────────╮
│ # │   name    │  type   │ size │  modified   │
├───┼───────────┼─────────┼──────┼─────────────┤
│ 0 │ symfile_x │ symlink │  6 B │ 2 hours ago │
╰───┴───────────┴─────────┴──────┴─────────────╯
```
2023-03-20 11:04:47 -05:00
Máté FARKAS
7d963776a0
stdlib: Implement common assert commands (#8515)
Implement common assert commands with tests.
Fixes #8419.

---------

Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
2023-03-20 08:57:28 -05:00
JT
ecc153cbef
Fix command missing hook default config (#8540)
# Description

Unbreak unit tests by updating default config for the new hook that
landed after the syntax change but didn't get its tests re-run.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-20 11:18:30 +01:00
Antoine Stevan
d1309a36b2
standard library: fix the readme (#8526)
# Description
as we now want to put all the library in `std.nu` alone, this PR removes
the mentions to "creating a separate submodule from `std.nu`" from the
`README` of the standard library and adds a few clarifications about the
structure of the library.

# User-Facing Changes
```
$nothing
```

# Tests + Formatting
```
$nothing
```

# After Submitting
```
$nothing
```
2023-03-20 17:05:49 +13:00
Steven Xu
1d3f6105f5
feat: add a command_not_found hook (#8314)
# Description
Add a `command_not_found` function to `$env.config.hooks`. If this
function outputs a string, then it's included in the `help`.

An example hook on *Arch Linux*, to find packages that contain the
binary, looks like:

```nushell
let-env config = {
  # ...
  hooks: {
    command_not_found: {
      |cmd_name| (
        try {
          let pkgs = (pkgfile --binaries --verbose $cmd_name)
          (
            $"(ansi $env.config.color_config.shape_external)($cmd_name)(ansi reset) " +
            $"may be found in the following packages:\n($pkgs)"
          )
        } catch {
          null
        }
      )
    }
    # ...
```

# User-Facing Changes
- Add a `command_not_found` function to `$env.config.hooks`.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-20 17:05:22 +13:00
Stefan Holderbach
e36a2947b9
Add CONTRIBUTING section on PRs and git (#8521)
# Description

I describe the status quo (e.g. squashing) which came up as a FAQ.
Further more I add some opinionated best practices.

Feel free to correct me if I am overzealous or imprecise. As it is
already quite long I don't want to expand the text if possible.

# Developer-Facing Changes

Added devdocs to have more guidelines/FAQs addressed
2023-03-19 20:11:20 +01:00
Michael Angerman
64f50a179e
remove unused imports: Deserialize, Serialize compiler warning for nu-protocol/src/example.rs (#8514)
when running the tests inside nu-protocol we were getting a compiler
warning...
this PR removes the compiler warning from nu-protocol.
by adding
```rust
#[allow(unused_imports)]
```
2023-03-18 11:45:12 -07:00
Antoine Stevan
f9cf1d943c
standard library: use the standard assert and fix test output (#8509)
# Description
## in the `test_dirs` test module
- use the `std assert` function in the `test_dirs` module instead of
`myassert`
- refactor the "test cleaning" in the `clean` command
- allows to clean the tests and then throw a real error in the `catch`
block in case there is an error
- the test still "try"s to `clean` the test directory after the `catch`,
like in a "finally" block
- parse the `catch` error and `error make` a proper one instead of
`debug`ging it => because the `catch` will be triggered as soon as one
error occurs, there will always only be a single error in the tests, so
this does not change the behaviour of failing `dirs` tests!

> **Note**
> i'm not particularly happy with the parsing stage in the `catch`
block.
> however that's the simplest i found to both keep the `try` / `catch`
construct that allows to clean the test directory and have a proper
error at the same time!

## in the global `tests` module
- use `print` instead of `echo` to make sure the log statements show up
during the tests

# User-Facing Changes
```
$nothing
```

# Tests + Formatting
```bash
nu crates/nu-utils/standard_library/tests.nu
```
passes but now with
- proper log statements
- proper error when a `dirs` error occurs => try with `sd 'assert \(1'
"assert (10" crates/nu-utils/standard_library/test_dirs.nu` 😉

# After Submitting
```
$nothing
```
2023-03-18 09:23:41 -05:00
Máté FARKAS
10a42de64f
standard library: add log commands (#8448)
# Description

```nushell
log critical "this is a critical message"
log error "this is an error message"
log warning "this is a warning message"
log info "this is an info message"
log debug "this is a debug message"
```


![image](https://user-images.githubusercontent.com/282320/225071852-1ddf0e87-d12b-452d-9598-5122df7123ab.png)

# Tests + Formatting

Tests are written. To run automatically, #8443 needs to be merged before
or after this PR.

---------

Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
2023-03-18 08:19:54 -05:00
Antoine Stevan
c66bd5e809
FEATURE: add a pretty output to toolkit check pr (#8416)
when i write a PR, i run the tests and i like to have a pretty output to
make extra clear which one of the tests did run, which one did not, etc,
etc...

this always end up a variation of the template
> - `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
> - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
> - `cargo test --workspace` to check that all tests pass

but with emojis and without the descriptions

> - 🟢 `cargo fmt --all`
> - 🔴 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
> - 🟡 `cargo test --workspace`
>
> and a  (``) when i did not have the time
or the resources to run the check stage

in this PR, i came up with a way to do that automatically with the
`toolkit` introduced in #8152 😋

# Description
this PR
- adds `toolkit::pretty-print-command` to print the command names being
run with backticks and some colors
- adds `toolkit::report` to return a "report" of the PR check stages =>
see `help toolkit check pr`
- adds the `--pretty` option to `toolkit check pr` to return a
list-with-emojis version of the check report, i.e. a *GitHub*-friendly
list to drop in place in the "Tests + Formatting" section
- adds a clear mention to `toolkit check pr --pretty` in the PR template
to make it easily visible to anyone

hope you'll like it, that's not a huge deal but that's my attempt to
encourage developers to show that they run the tests, what stages did
pass and which one did not 😌 👋

# User-Facing Changes
the developer can now use `toolkit check pr --pretty` to have a
ready-to-use output for *GitHub*

# Tests + Formatting
```
$nothing
```

# After Submitting
```
$nothing
```
2023-03-18 07:58:21 -05:00
Máté FARKAS
3f224db990
Make assert eq, assert ne consistent with ==, != operators (#8473)
fixes #8418

Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
2023-03-18 08:59:27 +13:00
Artemiy
491a9c019c
Revert "Hide 7925" (#8500)
Revert nushell/nushell#8359
Turn `[empty list]` on by default again
2023-03-18 08:58:13 +13:00
Dan Davison
77e9f8d7df
Short redirection syntax (#8503)
This one's pretty clear from the diff! It's more of a language design
discussion.
2023-03-18 08:57:37 +13:00
Antoine Stevan
14bf0b000e
standard library: fix the tests for the new closure parsing of 0.77.2 (#8504)
# Description
as closures now need to have explicit parameters, this PR adds the empty
`||` to the two closure of the `std match` test.

# User-Facing Changes
```
$nothing
```

# Tests + Formatting
```
nu crates/nu-utils/standard_library/tests.nu
```
does not give the following anymore
```
Error: nu::parser::closure_missing_pipe

  × Missing || inside closure
    ╭─[/home/amtoine/.local/share/git/store/github.com/amtoine/nushell/crates/nu-utils/standard_library/test_std.nu:29:1]
 29 │     let branches = {
 30 │         1: { -1 }
    ·            ───┬──
    ·               ╰── Parsing as a closure, but || is missing
 31 │         2: { -2 }
    ╰────
  help: Try add || to the beginning of closure

Error: nu:🐚:only_supports_this_input_type

  × Input type not supported.
    ╭─[/home/amtoine/.local/share/git/store/github.com/amtoine/nushell/crates/nu-utils/standard_library/tests.nu:7:1]
  7 │             nu -c $'use ($test_file) *; $nu.scope.commands | to nuon'
  8 │             | from nuon
    ·               ────┬────
    ·                   ╰── input type: nothing
  9 │             | where module_name == $module_name
    ·               ──┬──
    ·                 ╰── only list, binary, raw data or range input data is supported
 10 │             | where ($it.name | str starts-with "test_")
    ╰────
```

# After Submitting
```
$nothing
```
2023-03-18 08:52:08 +13:00
JT
0ca49091c0
Add rest and glob support to 'open' (#8506)
# Description

This adds two different features to `open`:
* The ability to pass more than one file to `open`.
* Support for using globs in the filenames

`open` will create a list stream and stream the output if there is more
than one file opened

Examples:

```
open file1.csv file2.csv file3.csv
```

```
open *.nu | where $it =~ "echo"
```

# User-Facing Changes

Multi-file and glob support in `open`. Original `open` functionality
should continue as before.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-18 08:51:39 +13:00
Antoine Stevan
bb8949f2b2
REFACTOR: put all the standard library in std.nu (#8489)
> **Warning**
> this PR is the result of a demand from the core team, to have the
simplest structure for the standard library, at least for now 👍

# Description
this PR mainly
- moved the `dirs.nu` module to the end of `std.nu`
- fixed the imports in `test_dirs.nu`

# User-Facing Changes
```
$nothing
```

# Tests + Formatting
with the new runner from #8443, we get as expected 👌 
```
>_ nu crates/nu-utils/standard_library/tests.nu
INFO  Run tests in test_dirs
DEBUG Run test test_dirs/test_dirs_command
INFO  Run tests in test_std
DEBUG Run test test_std/test_assert
DEBUG Run test test_std/test_match
DEBUG Run test test_std/test_path_add
```

# After Submitting
```
$nothing
```
2023-03-17 12:30:35 -05:00
Darren Schroeder
ef7fbf4bf9
Revert "Allow NU_LIBS_DIR and friends to be const" (#8501)
Reverts nushell/nushell#8310

In anticipation that we may want to revert this PR. I'm starting the
process because of this issue.

This stopped working
```
let-env NU_LIB_DIRS = [
    ($nu.config-path | path dirname | path join 'scripts')
    'C:\Users\username\source\repos\forks\nu_scripts'
    ($nu.config-path | path dirname)
]
```
You have to do this now instead.
```
const NU_LIB_DIRS = [
    'C:\Users\username\AppData\Roaming\nushell\scripts'
    'C:\Users\username\source\repos\forks\nu_scripts'
    'C:\Users\username\AppData\Roaming\nushell'
]
```

In talking with @kubouch, he was saying that the `let-env` version
should keep working. Hopefully it's a small change.
2023-03-17 09:33:24 -05:00
WindSoilder
eb2e2e6370
make else if generate helpful error when condition have an issue (#8274)
# Description

Fixes: #7575

# User-Facing Changes

Previously:
```
if❯ if false { "aaa" } else if $a { 'a' }
Error: nu::parser::parse_mismatch

  × Parse mismatch during operation.
   ╭─[entry #10:1:1]
 1 │ if false { "aaa" } else if $a { 'a' }
   ·                         ─┬
   ·                          ╰── expected block, closure or record
   ╰────

```

After:
```
❯ if false { "aaa" } else if $a { 'a' }
Error: nu::parser::variable_not_found

  × Variable not found.
   ╭─[entry #1:1:1]
 1 │ if false { "aaa" } else if $a { 'a' }
   ·                            ─┬
   ·                             ╰── variable not found
   ╰────

```


# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-17 07:37:59 -05:00
WindSoilder
a8eef9af33
Restrict closure expression to be something like {|| ...} (#8290)
# Description

As title, closes: #7921 closes: #8273

# User-Facing Changes

when define a closure without pipe, nushell will raise error for now:
```
❯ let x = {ss ss}
Error: nu::parser::closure_missing_pipe

  × Missing || inside closure
   ╭─[entry #2:1:1]
 1 │ let x = {ss ss}
   ·         ───┬───
   ·            ╰── Parsing as a closure, but || is missing
   ╰────
  help: Try add || to the beginning of closure
```

`any`, `each`, `all`, `where` command accepts closure, it forces user
input closure like `{||`, or parse error will returned.
```
❯ {major:2, minor:1, patch:4} | values | each { into string }
Error: nu::parser::closure_missing_pipe

  × Missing || inside closure
   ╭─[entry #4:1:1]
 1 │ {major:2, minor:1, patch:4} | values | each { into string }
   ·                                             ───────┬───────
   ·                                                    ╰── Parsing as a closure, but || is missing
   ╰────
  help: Try add || to the beginning of closure
```

`with-env`, `do`, `def`, `try` are special, they still remain the same,
although it says that it accepts a closure, but they don't need to be
written like `{||`, it's more likely a block but can capture variable
outside of scope:
```
❯ def test [input] { echo [0 1 2] | do { do { echo $input } } }; test aaa
aaa
```

Just realize that It's a big breaking change, we need to update config
and scripts...

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-17 07:36:28 -05:00
StevenDoesStuffs
400a9d3b1e
Allow NU_LIBS_DIR and friends to be const (#8310)
# Description

Allow NU_LIBS_DIR and friends to be const they can be updated within the
same parse pass. This will allow us to remove having multiple config
files eventually.

Small implementation detail: I've changed `call.parser_info` to a
hashmap with string keys, so the information can have names rather than
indices, and we don't have to worry too much about the order in which we
put things into it.

Closes https://github.com/nushell/nushell/issues/8422

# User-Facing Changes

In a single file, users can now do stuff like
```
const NU_LIBS_DIR = ['/some/path/here']
source script.nu
```
and the source statement will use the value of NU_LIBS_DIR declared the
line before.

Currently, if there is no `NU_LIBS_DIR` const, then we fallback to using
the value of the `NU_LIBS_DIR` env-var, so there are no breaking changes
(unless someone named a const NU_LIBS_DIR for some reason).


![2023-03-04-014103_hyprshot](https://user-images.githubusercontent.com/13265529/222885263-135cdd0d-7884-438b-b2ed-c3979fa44463.png)

# Tests + Formatting

~~TODO: write tests~~ Done

# After Submitting

~~TODO: update docs~~ Will do when we update default_env.nu/merge
default_env.nu into default_config.nu.
2023-03-17 07:23:29 -05:00
Luc Perkins
7095d8994e
Add char --list example to char command docs (#8474)
# Description

When using `char`, I somehow missed the `--list` flag (even though it's
of course displayed in the help output). While it's maybe a bit
redundant to have a usage of the flag in the examples, I suspect that I
may not be alone in needing an extra nudge on getting that info 😄

# User-Facing Changes

Just an extra example in the `char` help output.
2023-03-17 10:15:41 +01:00
JT
2d41613039
bump to 0.77.2 (#8496)
# Description

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-17 21:29:15 +13:00
JT
1552eb921a
parser: Add cell path literal syntax (#8493)
# Description

This adds a new cell path literal syntax for use in any value position,
not just in a context where we expect a cell path.

This can be used to assign to a variable and then later use that
variable as a cell path.

Example:
```
> let cell_path = $.a.b
> {a: {b: 3}} | get $cell_path
3
```
# User-Facing Changes

This adds the syntax `$.a.b` to universally mean the cell path `a.b`,
even in a context that doesn't expect a cell path.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-17 15:19:41 +13:00
JT
0ac3f7a1c8
parser: Fix panic that happens when you type a single { (#8492)
# Description

Fix the recent parser panic with a single `{`

Introduced by https://github.com/nushell/nushell/pull/8470

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-17 15:19:23 +13:00
JT
bddb63ccb5
Fix CI tests that landed after no-implicit-echo (#8491)
# Description

Turning off implicit echo got tested before some of these changes, so
bring a few tests in-line with that functionality.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-17 13:43:13 +13:00
Dan Davison
7625aed200
SQL-style join command for Nushell tables (#8424)
This PR adds a command `join` for performing SQL-style joins on Nushell
tables:

```
〉join -h
Join two tables

Usage:
  > join {flags} <right-table> <left-on> (right-on)

Flags:
  -h, --help - Display the help message for this command
  -i, --inner - Inner join (default)
  -l, --left - Left-outer join
  -r, --right - Right-outer join
  -o, --outer - Outer join

Signatures:
  <table> | join list<any>, <string>, <string?> -> <table>

Parameters:
  right-table <list<any>>: The right table in the join
  left-on <string>: Name of column in input (left) table to join on
  (optional) right-on <string>: Name of column in right table to join on. Defaults to same column as left table.

Examples:
  Join two tables
  > [{a: 1 b: 2}] | join [{a: 1 c: 3}] a
  ╭───┬───┬───╮
  │ a │ b │ c │
  ├───┼───┼───┤
  │ 1 │ 2 │ 3 │
  ╰───┴───┴───╯
```

<table>
    <tbody>
        <tr>
<td><img width="400" alt="image"
src="https://user-images.githubusercontent.com/52205/224578744-eb9d133e-2510-4a3d-bd0a-d615f07a06b7.png"></td>
        </tr>
    </tbody>
  </table>


# User-Facing Changes

Adds a new command `join`

# Tests + Formatting

```
cargo test -p nu-command commands::join
```

Don't forget to add tests that cover your changes.

- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass

# After Submitting

- [ ] If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

---------

Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
2023-03-16 16:57:20 -07:00
Artemiy
19beafa865
Disable pipeline echo (#8292)
# Description

Change behavior of block evaluation to not print result of intermediate
commands.
Previously result of every but last pipeline in a block was printed to
stdout, and last one was returned

![image](https://user-images.githubusercontent.com/17511668/222550110-3f62fbed-432c-4b46-b9b1-4cb45a1f893e.png)
With this change results of intermediate pipelines are discarded after
they finish and the last one is returned as before:

![image](https://user-images.githubusercontent.com/17511668/222550346-f1e74f80-f6b6-4aa3-98d6-888ea4cb4915.png)
Now one should use `print` explicitly to print something to stdout

![image](https://user-images.githubusercontent.com/17511668/222923955-fda0d77b-41b4-4f91-a80f-12b0a1880c05.png)

**Note, that this behavior is not limited to functions!** The scope of
this change are all blocks. All of the below are executed as blocks and
thus exibited this behavior in the same way:

![image](https://user-images.githubusercontent.com/17511668/222924062-342c15de-4273-4bf5-8b39-fe6e3aa96076.png)

With this change outputs for all types of blocks are cleaned:

![image](https://user-images.githubusercontent.com/17511668/222924118-7d51c27e-04bb-43e5-8efe-38b484683bfe.png)


# User-Facing Changes

All types of blocks (function bodies, closures, `if` branches, `for` and
`loop` bodies e.t.c.) no longer print result of intermediate pipelines.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-17 11:53:46 +13:00
Matthew Deville
8543b0789d
Additional flags for commands from csv and from tsv (#8398)
# Description

Resolves issue #8370

Adds the following flags to commands `from csv` and `from tsv`:
- `--flexible`: allow the number of fields in records to be variable
- `-c --comment`: a comment character to ignore lines starting with it
- `-q --quote`: a quote character to ignore separators in strings,
defaults to '\"'
- `-e --escape`: an escape character for strings containing the quote
character

Internally, the `Value` struct has an additional helper function
`as_char` which converts it to a single `char`

# User-Facing Changes

The single quoted string `'\t'` can no longer be used as a parameter for
the flag `--separator '\t'` as it is interpreted as a two-character
string. One needs to use from now on the flag with a double quoted
string like so: `-s "\t"` which correctly interprets the string as a
single `char`.
2023-03-16 17:49:46 -05:00
Darren Schroeder
bdaa01165e
enable error reporting from enable_vt_processing (#8373)
# Description

This PR tweaks the enable_vt_processing() function with more verbose
error handling. This is related to #8344.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-16 17:48:21 -05:00
Steven Xu
b2a557d4ed
fix: fix commandline when called with no arguments (#8207)
# Description

This fixes the `commandline` command when it's run with no arguments, so
it outputs the command being run. New line characters are included.

This allows for:

- [A way to get current command inside pre_execution hook · Issue #6264
· nushell/nushell](https://github.com/nushell/nushell/issues/6264)
- The possibility of *Atuin* to work work *Nushell*. *Atuin* hooks need
to know the current repl input before it is run.

# User-Facing Changes

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-16 17:45:35 -05:00
JT
0903a891e4
Fix parse of def with paren params (#8490)
# Description

This adds back support for parens around params, eg `def foo (x: int) {
... }`

# User-Facing Changes

returns to the original support before the recent parser refactor

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-17 09:08:41 +13:00
Reilly Wood
1b2916988e
Add -i flag back to get and select (#8488)
https://github.com/nushell/nushell/pull/8379 removed the `-i` flag from
`get` and `select` because the new `?` functionality covers most of the
same use cases. However, https://github.com/nushell/nushell/issues/8480
made me realize that `-i` is still useful when dealing with cell paths
in variables.

This PR re-adds the `-i` flag to `get` and `select`. It works by just
marking every member in the cell path as optional, which will behave
_slightly_ differently than `-i` used to (previously it would suppress
any errors, even type errors) but IMO that's OK.
2023-03-16 11:50:04 -07:00
Máté FARKAS
d74a260883
stdlib: add test discovery, extract test files (#8443)
# Description

Was original asked here:
https://github.com/nushell/nushell/pull/8405#issuecomment-1465062652
Make it easier to extend standard library with submodules.
(For a new submodule called `xx.nu` the tests can be written in
`test_xx.nu`).
Test discovery is implemented.

# User-Facing Changes

There are no user-facing changes.

# Tests + Formatting

Tests are updated.
There is no `nufmt` now.

---------

Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
2023-03-16 13:23:29 -05:00
WindSoilder
31d9c0889c
Revert "Throw out error if external command in subexpression is failed to run (#8204)" (#8475)
This reverts commit dec0a2517f.

It breaks programs like `fzf`

# Description

Fixes: #8472 
Fixes:  #8313
Reopen: #7690 

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-03-17 07:07:32 +13:00