Hi there
Here I am using latest tabled.
My tests shows it does fixes panics, but I am wanna be sure.
@fdncred could you verify that it does fixes those panics/errors?
Closes#13405Closes#12786
Based on the discussion in #13419.
## Description
Reworks the `decode`/`encode` commands by adding/changing the following
bases:
- `base32`
- `base32hex`
- `hex`
- `new-base64`
The `hex` base is compatible with the previous version of `hex` out of
the box (it only adds more flags). `base64` isn't, so the PR adds a new
version and deprecates the old one.
All commands have `string -> binary` signature for decoding and `string
| binary -> string` signature for encoding. A few `base64` encodings,
which are not a part of the
[RFC4648](https://datatracker.ietf.org/doc/html/rfc4648#section-6), have
been dropped.
## Example usage
```Nushell
~/fork/nushell> "string" | encode base32 | decode base32 | decode
string
```
```Nushell
~/fork/nushell> "ORSXG5A=" | decode base32
# `decode` always returns a binary value
Length: 4 (0x4) bytes | printable whitespace ascii_other non_ascii
00000000: 74 65 73 74 test
```
## User-Facing Changes
- New commands: `encode/decode base32/base32hex`.
- `encode hex` gets a `--lower` flag.
- `encode/decode base64` deprecated in favor of `encode/decode
new-base64`.
# Description
The meaning of the word usage is specific to describing how a command
function is *used* and not a synonym for general description. Usage can
be used to describe the SYNOPSIS or EXAMPLES sections of a man page
where the permitted argument combinations are shown or example *uses*
are given.
Let's not confuse people and call it what it is a description.
Our `help` command already creates its own *Usage* section based on the
available arguments and doesn't refer to the description with usage.
# User-Facing Changes
`help commands` and `scope commands` will now use `description` or
`extra_description`
`usage`-> `description`
`extra_usage` -> `extra_description`
Breaking change in the plugin protocol:
In the signature record communicated with the engine.
`usage`-> `description`
`extra_usage` -> `extra_description`
The same rename also takes place for the methods on
`SimplePluginCommand` and `PluginCommand`
# Tests + Formatting
- Updated plugin protocol specific changes
# After Submitting
- [ ] update plugin protocol doc
# Description
The previous behaviour of `into record` on lists was to create a new
record with each list index as the key. This was not very useful for
creating meaningful records, though, and most people would end up using
commands like `headers` or `transpose` to turn a list of keys and values
into a record.
This PR changes that instead to do what I think the most ergonomic thing
is, and instead:
- A list of records is merged into one record.
- A list of pairs (two element lists) is folded into a record with the
first element of each pair being the key, and the second being the
value.
The former is just generally more useful than having to use `reduce`
with `merge` for such a common operation, and the latter is useful
because it means that `$a | zip $b | into record` *just works* in the
way that seems most obvious.
Example:
```nushell
[[foo bar] [baz quux]] | into record # => {foo: bar, baz: quux}
[{foo: bar} {baz: quux}] | into record # => {foo: bar, baz: quux}
[foo baz] | zip [bar quux] | into record # => {foo: bar, baz: quux}
```
The support for range input has been removed, as it would no longer
reflect the treatment of an equivalent list.
The following is equivalent to the old behavior, in case that's desired:
```
0.. | zip [a b c] | into record # => {0: a, 1: b, 2: c}
```
# User-Facing Changes
- `into record` changed as described above (breaking)
- `into record` no longer supports range input (breaking)
# Tests + Formatting
Examples changed to match, everything works. Some usage in stdlib and
`nu_plugin_nu_example` had to be changed.
# After Submitting
- [ ] release notes (commands, breaking change)
Fixesnushell/nushell#8723
# Description
The example was showing the flag that no longer exists.
# User-Facing Changes
Help no longer shows the example with `-d` flag.
# Tests + Formatting
I trust in CI.
# After Submitting
Nothing.
Fixesnushell/nushell#7995
# Description
This dependency is no longer used by nushell itself.
# User-Facing Changes
None.
# Tests + Formatting
Pased.
# After Submitting
None.
# Description
Prefer process name over executable path. This in practice causes the
`name` column to use just the base executable name.
Also set start_time to nothing on error, because why not.
# User-Facing Changes
Before:
> /opt/google/chrome/chrome
After:
> chrome
Also picks up changes due to `echo test-proc > /proc/$$/comm`.
# Tests + Formatting
No new coverage.
# Description
Previously when nushell failed to parse the content type header, it
would emit an error instead of returning the response. Now it will fall
back to `text/plain` (which, in turn, will trigger type detection based
on file extension).
May fix (potentially) nushell/nushell#11927
Refs:
https://discord.com/channels/601130461678272522/614593951969574961/1272895236489613366
Supercedes: #13609
# User-Facing Changes
It's now possible to fetch content even if the server returns an invalid
content type header. Users may need to parse the response manually, but
it's still better than not getting the response at all.
# Tests + Formatting
Added a test for the new behaviour.
# After Submitting
# Description
@sholderbach pointed out that I could've made this error message better.
So, here's my attempt to make it better.
This should work. I had a hard time figuring out how to trigger the
error anyway because the type checker doesn't allow "bad" parameters to
begin with.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes glob to take either a string or a glob as a parameter.
Closes#13611
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is meant to provide a more helpful error message when using http
get and the content type can't be parsed.
### Before
### After
The span isn't perfect but there's no way to get the span of the content
type that I can see.
In the middle of fixing this error, I also discovered how to fix the
problem in general. Since you can now see the error message complaining
about double quotes (char 22 at position 0. 22 hex is `"`). The fix is
just to remove all the double quotes from the content_type and then you
get this.
### After After
The discussion on Discord about this is that `--raw` or
`--ignore-errors` should eat this error and it "just work" as well as
default to text or binary when the mime parsing fails. I agree but this
PR does not implement that.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13479
# User-Facing Changes
Given the following setup:
```
cd /tmp
touch src_file.txt
ln -s src_file.txt link1
```
### Before
```
ls -lf link1 | get target.0 # It outputs src_file.txt
```
### After
```
ls -lf link1 | get target.0 # It outputs /tmp/src_file.txt
```
# Tests + Formatting
Added a test for the change
# Description
Fixes Issue #13477
This adds a check to see if a user is trying to invoke a
(non-executable) file as a command and returns a helpful error if so.
EDIT: this will not work on Windows, and is arguably not relevant there,
because of the different semantics of executables. I think the
equivalent on Windows would be if a user tries to invoke `./foo`, we
should look for `foo.exe` or `foo.bat` in the directory and recommend
that if it exists.
# User-Facing Changes
When a user invokes an unrecognized command that is the path to an
existing file, the error used to say:
`{name} is neither a Nushell built-in or a known external command`
This PR proposes to change the message to:
`{name} refers to a file that is not executable. Did you forget to to
set execute permissions?`
# Tests + Formatting
Ran cargo fmt, clippy and test on the workspace.
EDIT: added test asserting the new behavior
# Description
Something I meant to add a long time ago. We currently don't have a
convenient way to print raw binary data intentionally. You can pipe it
through `cat` to turn it into an unknown stream, or write it to a file
and read it again, but we can't really just e.g. generate msgpack and
write it to stdout without this. For example:
```nushell
[abc def] | to msgpack | print --raw
```
This is useful for nushell scripts that will be piped into something
else. It also means that `nu_plugin_nu_example` probably doesn't need to
do this anymore, but I haven't adjusted it yet:
```nushell
def tell_nushell_encoding [] {
print -n "\u{0004}json"
}
```
This happens to work because 0x04 is a valid UTF-8 character, but it
wouldn't be possible if it were something above 0x80.
`--raw` also formats other things without `table`, I figured the two
things kind of go together. The output is kind of like `to text`.
Debatable whether that should share the same flag, but it was easier
that way and seemed reasonable.
# User-Facing Changes
- `print` new flag: `--raw`
# Tests + Formatting
Added tests.
# After Submitting
- [ ] release notes (command modified)
This PR closes [Issue
#13482](https://github.com/nushell/nushell/issues/13482)
# Description
This PR tend to make all math function to be constant.
# User-Facing Changes
The math commands now can be used as constant methods.
### Some Example
```
> const MODE = [3 3 9 12 12 15] | math mode
> $MODE
╭───┬────╮
│ 0 │ 3 │
│ 1 │ 12 │
╰───┴────╯
> const LOG = [16 8 4] | math log 2
> $LOG
╭───┬──────╮
│ 0 │ 4.00 │
│ 1 │ 3.00 │
│ 2 │ 2.00 │
╰───┴──────╯
> const VAR = [1 3 5] | math variance
> $VAR
2.6666666666666665
```
# Tests + Formatting
Tests are added for all of the math command to test there constant
behavior.
I mostly focused on the actual user experience, not the correctness of
the methods and algorithms.
# After Submitting
I think this change don't require any additional documentation. Feel
free to correct me in this topic please.
# Description
Attempt to guess the content type of a file when opening with --raw and
set it in the pipeline metadata.
<img width="644" alt="Screenshot 2024-08-02 at 11 30 10"
src="https://github.com/user-attachments/assets/071f0967-c4dd-405a-b8c8-f7aa073efa98">
# User-Facing Changes
- Content of files can be directly piped into commands like `http post`
with the content type set appropriately when using `--raw`.
# Description
When using a format string, `into datetime` would disallow an `int` even
when it logically made sense. This was mainly a problem when attempting
to convert a Unix epoch to Nushell `datetime`. Unix epochs are often
stored or returned as `int` in external data sources.
```nu
1722821463 | into datetime -f '%s'
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #3:1:1]
1 │ 1722821463 | into datetime -f '%s'
· ─────┬──── ──────┬──────
· │ ╰── only string input data is supported
· ╰── input type: int
╰────
```
While the solution was simply to `| to text` the `int`, this PR handles
the use-case automatically.
Essentially a ~5 line change that just moves the current parsing to a
closure that is called for both Strings and Ints-converted-to-Strings.
# User-Facing Changes
After the change:
```nu
[
1722821463
"1722821463"
0
] | each { into datetime -f '%s' }
╭───┬──────────────╮
│ 0 │ 10 hours ago │
│ 1 │ 10 hours ago │
│ 2 │ 54 years ago │
╰───┴──────────────╯
```
# Tests + Formatting
Test case added.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
# Description
Part 4 of replacing std::path types with nu_path types added in
https://github.com/nushell/nushell/pull/13115. This PR migrates various
tests throughout the code base.
# Description
Since we make the promise that record keys/columns are exclusice we
don't have to go through all columns after we have found the first one.
Should permit some short-circuiting if the column is found early.
# User-Facing Changes
(-)
# Tests + Formatting
(-)
# Description
Updates `default` command description to be more clear and adds an
example for a missing values in a list-of-records.
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- Update `nothing` doc in Book to reference `default` per
https://github.com/nushell/nushell.github.io/issues/1073 - This was a
bit of a rabbit trail on the path to that update. ;-)
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
With this PR, we should be able to close
https://github.com/nushell/nushell.github.io/issues/1225
Help/doc/examples updated for:
* `cd` to show multi-dot traversal
* `cd` to show implicit `cd` with bare directory path
* Fixed/clarified another example that mentioned `$OLDPATH` while I was
in there
* `mv` and `cp` examples for multi-dot traversal
* Updated `cp` examples to use more consistent (and clear) filenames
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Clarified `random chars` help/doc:
* Default string length in absence of a `--length` arg is 25
* Characters are *"uniformly distributed over ASCII letters and numbers:
a-z, A-Z and 0-9"* (copied from the [`rand` crate
doc](https://docs.rs/rand/latest/rand/distributions/struct.Alphanumeric.html).
# User-Facing Changes
Help/Doc only
Lints from stable or nightly toolchain that may have questionable added
value.
- **Contentious lint to contract into single `if let`**
- **Potential false positive around `AsRef`/`Deref` fun**
# Description
Part 3 of replacing `std::path` types with `nu_path` types added in
#13115. This PR targets the paths listed in `$nu`. That is, the home,
config, data, and cache directories.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Add `--upgrade, -u` switch for `mv` command, corresponding to `cp`.
Closes#13458.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
```plain
❯ help mv | find update
╭──────────┬───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ 0 │ -u, --update - move and overwite only when the SOURCE file is newer than the destination file or when the destination file is missing │
╰──────────┴───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
-->
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
<!--
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
P.S.
The standard test kit (`nu-test-support`) doesn't provide utility to
create file with modification timestamp, and I didn't find any test for
this in `cp` command. I had tested on my local machine but I'm not sure
how to integrate it into ci. If unit testing is required, I may need
your guidance.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- [x] Command docs are auto generated.
# Description
Before this change, `"hash sha256 123 ok" | split words` would return
`[hash sha ok]` - which is surprising to say the least.
Now it will return `[hash sha256 123 ok]`.
Refs:
https://discord.com/channels/601130461678272522/615253963645911060/1268151658572025856
# User-Facing Changes
`split words` will no longer remove digits.
# Tests + Formatting
Added a test for this specific case.
# After Submitting
# Description
Minor nitpicks, but the `random int` help and examples were a bit
ambiguous in several aspects. Updated to clarify that:
* An unconstrained `random int` returns a non-negative integer. That is,
the smallest potential value is 0. Technically integers include negative
numbers as well, and `random int` will never return one unless you pass
it a range with a negative lower-bound.
* To that end, changed the final example to demonstrate a negative
lower-bound.
* The range is inclusive. While most people would probably assume this,
the changes make this explicit in the examples and argument description.
# User-Facing Changes
Help only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib
# After Submitting
N/A
- **Doccomment style fixes**
- **Forgotten stuff in `nu-pretty-hex`**
- **Don't `for` around an `Option`**
- and more
I think the suggestions here are a net positive, some of the suggestions
moved into #13498 feel somewhat arbitrary, I also raised
https://github.com/rust-lang/rust-clippy/issues/13188 as the nightly
`byte_char_slices` would require either a global allow or otherwise a
ton of granular allows or possibly confusing bytestring literals.
# Description
Fixes: #13260
When user run a command like this:
```nushell
$env.FOO = " New";
$env.BAZ = " New Err";
do -i {nu -n -c 'nu --testbin echo_env FOO; nu --testbin echo_env_stderr BAZ'} | save -a -r save_test_22/log.txt
```
`save` command sinks the output of previous commands' stderr output. I
think it should be `stderr`.
# User-Facing Changes
```nushell
$env.FOO = " New";
$env.BAZ = " New Err";
do -i {nu -n -c 'nu --testbin echo_env FOO; nu --testbin echo_env_stderr BAZ'} | save -a -r save_test_22/log.txt
```
The command will output ` New Err` to stderr.
# Tests + Formatting
Added 2 cases.
- **Suggested default impl for the new `*Stack`s**
- **Change a hashmap to make clippy happy**
- **Clone from fix**
- **Fix conditional unused in test**
- then **Bump rust toolchain**
# Description
This makes assignment operations and `const` behave the same way `let`
and `mut` do, absorbing the rest of the pipeline.
Changes the lexer to be able to recognize assignment operators as a
separate token, and then makes the lite parser continue to push spans
into the same command regardless of any redirections or pipes if an
assignment operator is encountered. Because the pipeline is no longer
split up by the lite parser at this point, it's trivial to just parse
the right hand side as if it were a subexpression not contained within
parentheses.
# User-Facing Changes
Big breaking change. These are all now possible:
```nushell
const path = 'a' | path join 'b'
mut x = 2
$x = random int
$x = [1 2 3] | math sum
$env.FOO = random chars
```
In the past, these would have led to (an attempt at) bare word string
parsing. So while `$env.FOO = bar` would have previously set the
environment variable `FOO` to the string `"bar"`, it now tries to run
the command named `bar`, hence the major breaking change.
However, this is desirable because it is very consistent - if you see
the `=`, you can just assume it absorbs everything else to the right of
it.
# Tests + Formatting
Added tests for the new behaviour. Adjusted some existing tests that
depended on the right hand side of assignments being parsed as
barewords.
# After Submitting
- [ ] release notes (breaking change!)
# Description
Just a quick PR to demonstrate one way to make commands const.
related to https://github.com/nushell/nushell/issues/13482
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The current version of `stor` forces stripping ansi code coloring from
all the strings.
In this PR, I propose to keep strings unchanged.
The logic behind the proposed changes was best described in the
[discord](https://discord.com/channels/601130461678272522/601130461678272524/1266387441074442272):
<img width="773" alt="image"
src="https://github.com/user-attachments/assets/063cdebd-684f-46f1-aca1-faeb4827723d">
with proposed changes we can store colored output:
```
stor reset; stor create --table-name test --columns {a: str};
ls | table | {a: $in} | stor insert --table-name test | null;
stor open | query db 'select a from test' | get a.0
```
<img width="704" alt="image"
src="https://github.com/user-attachments/assets/8f062808-18fc-498b-a77e-a118f6b9953a">
# User-Facing Changes
If one was using `stor` together with ansi colored input, and then was
querying `stor` with search operations, they might break. But I don't
think that it is a big problem, as one will just need to use `ansi
reset` before storing data.
# Tests + Formatting
Tests are okay.
Thanks to @fdncred for spending time to help me write these changes 🙏
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
resolve#13459
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Make `reduce` supply the accumulator value to closure as pipeline input.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Mostly described in #13459
- Should not be a breaking change.
- Allows cleaner patterns like `... | reduce {|it| merge $it}`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
`cargo test --package nu-cli --test main -- commands::reduce` and
`toolkit test stdlib` report no issues
