Continuation of #8229 and #8326
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
# Call to action
**Everyone:** Feel free to add review comments if you spot inconsistent
use of `ShellError` variants.
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
# Commits (so far)
- Remove `ShellError::FeatureNotEnabled`
- Name fields on `SE::ExternalNotSupported`
- Name field on `SE::InvalidProbability`
- Name fields on `SE::NushellFailed` variants
- Remove unused `SE::NushellFailedSpannedHelp`
- Name field on `SE::VariableNotFoundAtRuntime`
- Name fields on `SE::EnvVarNotFoundAtRuntime`
- Name fields on `SE::ModuleNotFoundAtRuntime`
- Remove usused `ModuleOrOverlayNotFoundAtRuntime`
- Name fields on `SE::OverlayNotFoundAtRuntime`
- Name field on `SE::NotFound`
Continuation of #8229
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
**Everyone:** Feel free to add review comments if you spot inconsistent
use of `ShellError` variants.
- Name fields of `SE::IncorrectValue`
- Merge and name fields on `SE::TypeMismatch`
- Name fields on `SE::UnsupportedOperator`
- Name fields on `AssignmentRequires*` and fix doc
- Name fields on `SE::UnknownOperator`
- Name fields on `SE::MissingParameter`
- Name fields on `SE::DelimiterError`
- Name fields on `SE::IncompatibleParametersSingle`
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
Feel free to add review comments if you spot inconsistent use of
`ShellError` variants.
- Name fields on `ShellError::OperatorOverflow`
- Name fields on `ShellError::PipelineMismatch`
- Add doc to `ShellError::OnlySupportsThisInputType`
- Name `ShellError::OnlySupportsThisInputType`
- Name field on `ShellError::PipelineEmpty`
- Comment about issues with `TypeMismatch*`
- Fix a few `exp_input_type`s
- Name fields on `ShellError::InvalidRange`
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
# Description
This change fixes the bug associated with an incorrect span in
`type_mismatch` error message as described in #7288
The `span` argument in the method `into_value` was not being used to
convert a `PipelineData::Value` type so when called in
[eval_expression](https://github.com/nushell/nushell/blob/main/crates/nu-engine/src/eval.rs#L514-L515),
the original expression's span was not being used to overwrite the
result of `eval_subexpression`.
# User-Facing Changes
Using the example described in the issue, the whole bracketed
subexpression is correctly underlined.
Behavior before change:
```
let val = 10
($val | into string) + $val
Error: nu:🐚:type_mismatch
× Type mismatch during operation.
╭─[entry #2:1:1]
1 │ ($val | into string) + $val
· ─────┬───── ┬ ──┬─
· │ │ ╰── int
· │ ╰── type mismatch for operator
· ╰── string
╰────
```
Behavior after change:
```
let val = 10
($val | into string) + $val
Error: nu:🐚:type_mismatch
× Type mismatch during operation.
╭─[entry #2:1:1]
1 │ ($val | into string) + $val
· ──────────┬───────── ┬ ──┬─
· │ │ ╰── int
· │ ╰── type mismatch for operator
· ╰── string
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds an alternative alias implementation. Old aliases still work
but you need to use `old-alias` instead of `alias`.
Instead of replacing spans in the original code and re-parsing, which
proved to be extremely error-prone and a constant source of panics, the
new implementation creates a new command that references the old
command. Consider the new alias defined as `alias ll = ls -l`. The
parser creates a new command called `ll` and remembers that it is
actually a `ls` command called with the `-l` flag. Then, when the parser
sees the `ll` command, it will translate it to `ls -l` and passes to it
any parameters that were passed to the call to `ll`. It works quite
similar to how known externals defined with `extern` are implemented.
The new alias implementation should work the same way as the old
aliases, including exporting from modules, referencing both known and
unknown externals. It seems to preserve custom completions and pipeline
metadata. It is quite robust in most cases but there are some rough
edges (see later).
Fixes https://github.com/nushell/nushell/issues/7648,
https://github.com/nushell/nushell/issues/8026,
https://github.com/nushell/nushell/issues/7512,
https://github.com/nushell/nushell/issues/5780,
https://github.com/nushell/nushell/issues/7754
No effect: https://github.com/nushell/nushell/issues/8122 (we might
revisit the completions code after this PR)
Should use custom command instead:
https://github.com/nushell/nushell/issues/6048
# User-Facing Changes
Since aliases are now basically commands, it has some new implications:
1. `alias spam = "spam"` (requires command call)
* **workaround**: use `alias spam = echo "spam"`
2. `def foo [] { 'foo' }; alias foo = ls -l` (foo defined more than
once)
* **workaround**: use different name (commands also have this
limitation)
4. `alias ls = (ls | sort-by type name -i)`
* **workaround**: Use custom command. _The common issue with this is
that it is currently not easy to pass flags through custom commands and
command referencing itself will lead to stack overflow. Both of these
issues are meant to be addressed._
5. TODO: Help messages, `which` command, `$nu.scope.aliases`, etc.
* Should we treat the aliases as commands or should they be separated
from regular commands?
6. Needs better error message and syntax highlight for recursed alias
(`alias f = f`)
7. Can't create alias with the same name as existing command (`alias ls
= ls -a`)
* Might be possible to add support for it (not 100% sure)
8. Standalone `alias` doesn't list aliases anymore
9. Can't alias parser keywords (e.g., stuff like `alias ou = overlay
use` won't work)
* TODO: Needs a better error message when attempting to do so
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR addresses issue #2047 in order to enable autocomplete
functionality when using sudo for executing commands. I'e done a couple
of auxiliary checks such as ignoring whitespace and the last pipe in
order to determine the last command.
# User-Facing Changes
The only user facing change should be the autocomplete working.
# Tests + Formatting
All tests and formatting pass.
# Screenshots
<img width="454" alt="image"
src="https://user-images.githubusercontent.com/4399118/219404037-6cce4358-68a9-42bb-a09b-2986b10fa6cc.png">
# Suggestions welcome
I still don't know the in's and out's if nushell very well, any
suggestions for improvements are welcome.
# Description
Fixes#8002, which expands ranges `1..3` to expand to array-like when
saving and converting to json. Now,
```
> 1..3 | save foo.json
# foo.json
[
1,
2,
3
]
> 1..3 | to json
[
1,
2,
3
]
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
issue #8167
Remove the `(link)` to the docs for `ShellError` and `ParseError`. As
per discussion on the issue, the nu-parser version didn't update on the
docs causing deadlinks for those errors, which brought the usefullness
of these links into question and it was decided to remove all of them
that `derive(diagnostic)`.
# User-Facing Changes
Before:
```
/home/rdevenney/projects/open_source/nushell〉ls | get name}
Error: nu::parser::unbalanced_delimiter (link)
× Unbalanced delimiter.
╭─[entry #1:1:1]
1 │ ls | get name}
· ▲
· ╰── unbalanced { and }
╰────
```
After:
```
/home/rdevenney/projects/open_source/nushell〉ls | get name}
Error: nu::parser::unbalanced_delimiter
× Unbalanced delimiter.
╭─[entry #1:1:1]
1 │ ls | get name}
· ▲
· ╰── unbalanced { and }
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes a bug where a default list in a custom command parameter
wasn't being accepted. The reason was because it was comparing specific
types of list like `list<any>` != `list<string>`. So, this PR attempts
to fix that.
### Before
```
> def f [param: list = [one]] { echo $param }
Error: nu::parser::assignment_mismatch (link)
× Default value wrong type
╭─[entry #1:1:1]
1 │ def f [param: list = [one]] { echo $param }
· ──┬──
· ╰── default value not list<any>
╰────
```
### After
```
> def f [param: list = [one]] {echo $param}
> f
╭───┬─────╮
│ 0 │ one │
╰───┴─────╯
```
closes#8092
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Before landing:
- [x] `reedline 0.16.0` is out and pinned.
- [x] all fixes and features necessary are landed.
In the meantime:
- [ ] feed the release notes with relevant features and breaking changes
# Description
As title, I found this feature is useful to me too :)
Closes: #8039
# User-Facing Changes
```
❯ 3 * "ab"
ababab
❯ 3 * [1 2 3]
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 1 │
│ 4 │ 2 │
│ 5 │ 3 │
│ 6 │ 1 │
│ 7 │ 2 │
│ 8 │ 3 │
╰───┴───╯
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This one fixes env not being hidden inside closure, reported in the
conversation under https://github.com/nushell/nushell/issues/6593https://github.com/nushell/nushell/issues/6593https://github.com/nushell/nushell/issues/7937 still persist. These
seems a bit more involved and might need hidden env tracking also in the
engine state... I'm not yet sure what's causing it.
Also re-enables some env-related tests and removes unused Value clone.
# User-Facing Changes
Just a bugfix
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Improve error when `str replace <pattern>` detects a problem with
<pattern>.
# User-Facing Changes
New "Incorrect value" error:
```
〉 'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
Error: nu:🐚:incorrect_value (link)
× Incorrect value.
╭─[entry #1:1:1]
1 │ 'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
· ─────┬────
· ╰── Regex error: Parsing error at position 4: Invalid hex escape
╰────
```
We could fruitfully replace some of the current uses of
`ShellError::UnsupportedInput` with this error. 'Incorrect value' is
different from 'wrong type'
# Tests + Formatting
Don't forget to add tests that cover your changes.
* none added / changed.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Adds a `profile` command that profiles each pipeline element of a block
and can also recursively step into child blocks.
# Limitations
* It is implemented using pipeline metadata which currently get lost in
some circumstances (e.g.,
https://github.com/nushell/nushell/issues/4501). This means that the
profiler will lose data coming from subexpressions. This issue will
hopefully be solved in the future.
* It also does not step into individual loop iteration which I'm not
sure why but maybe that's a good thing.
# User-Facing Changes
Shouldn't change any existing behavior.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
I noticed that `open some_big_file | into binary` cannot be cancelled
with `ctrl+c`.
This small PR fixes that by checking `ctrl+c` in
`RawStream::into_bytes()`, and does the same in
`RawStream::into_string()` for good measure.
This PR makes `++` (the append operator) work with strings and binary
values. Can now do things like:
```bash
〉"a" ++ "b"
ab
〉0x[01 02] ++ 0x[03]
Length: 3 (0x3) bytes | printable whitespace ascii_other non_ascii
00000000: 01 02 03 •••
```
Closes#8015.
# Description
This PR does the following:
1. Adds a new command called `view span` - which shows what is at the
location of the span parameters
2. Adds a new command called `view` - which just lists all the `view`
commands.
3. Renames `view-source` to `view source`.
4. Adds a new command called `view files` - which shows you what files
are loaded into nushell's EngineState memory.
5. Added a `Category::Debug` and put these commands (and others) into
it. (`inspect` needs to be added to it, but it's not landed yet)
Spans are important to nushell. One of their uses is to show where
errors are. For instance, in this example, the leader lines pointing to
parts of the command line are able to point to `10`, `/`, and `"bob"`
because each of those items have a span.
```
> 10 / "bob"
Error: nu::parser::unsupported_operation (link)
× Types mismatched for operation.
╭─[entry #8:1:1]
1 │ 10 / "bob"
· ─┬ ┬ ──┬──
· │ │ ╰── string
· │ ╰── doesn't support these values.
· ╰── int
╰────
help: Change int or string to be the right types and try again.
```
# Examples
## view span
Example:
```
> $env.config | get keybindings | first | debug -r
... bunch of stuff
span: Span {
start: 68065,
end: 68090,
},
},
],
span: Span {
start: 68050,
end: 68101,
},
},
],
span: Span {
start: 67927,
end: 68108,
},
}
```
To view the last span:
```
> view span 67927 68108
{
name: clear_everything
modifier: control
keycode: char_l
mode: emacs
event: [
{ send: clearscrollback }
]
}
```
> To view the 2nd to last span:
```
view span 68065 68090
{ send: clearscrollback }
```
> To view the 3rd to last span:
```
view span 68050 68101
[
{ send: clearscrollback }
]
```
## view files
```
> view files
╭────┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│ # │ filename │ start │ end │ size │
├────┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│ 0 │ source │ 0 │ 2 │ 2 │
│ 1 │ Host Environment Variables │ 2 │ 6034 │ 6032 │
│ 2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │ 6034 │ 31236 │ 25202 │
│ 3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu │ 31236 │ 44961 │ 13725 │
│ 4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │ 44961 │ 76134 │ 31173 │
│ 5 │ defs.nu │ 76134 │ 91944 │ 15810 │
│ 6 │ prompt\oh-my.nu │ 91944 │ 111523 │ 19579 │
│ 7 │ weather\get-weather.nu │ 111523 │ 125556 │ 14033 │
│ 8 │ .zoxide.nu │ 125556 │ 127504 │ 1948 │
│ 9 │ source │ 127504 │ 127561 │ 57 │
│ 10 │ entry #1 │ 127561 │ 127585 │ 24 │
│ 11 │ entry #2 │ 127585 │ 127595 │ 10 │
╰────┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
`entry #x` will be each command you type in the repl (i think). so, it
may be good to filter those out sometimes.
```
> view files | where filename !~ entry
╭───┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│ # │ filename │ start │ end │ size │
├───┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│ 0 │ source │ 0 │ 2 │ 2 │
│ 1 │ Host Environment Variables │ 2 │ 6034 │ 6032 │
│ 2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │ 6034 │ 31236 │ 25202 │
│ 3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu │ 31236 │ 44961 │ 13725 │
│ 4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │ 44961 │ 76134 │ 31173 │
│ 5 │ defs.nu │ 76134 │ 91944 │ 15810 │
│ 6 │ prompt\oh-my.nu │ 91944 │ 111523 │ 19579 │
│ 7 │ weather\get-weather.nu │ 111523 │ 125556 │ 14033 │
│ 8 │ .zoxide.nu │ 125556 │ 127504 │ 1948 │
│ 9 │ source │ 127504 │ 127561 │ 57 │
╰───┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
# User-Facing Changes
I renamed `view-source` to `view source` just to make a group of
commands. No functionality has changed in `view source`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR attempts to fix the completions issue where, on Windows,
completions wouldn't get generated from items in your path environment
variable. This seemed to be down to `PATH` vs `Path`. So, I tried to add
a new function that we can use anywhere to avoid this problem.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, we can't provide examples for plugin commands, this pr would
make it possible
# User-Facing Changes
Take plugin `nu-example-1` as example:
```
❯ nu-example-1 -h
PluginSignature test 1 for plugin. Returns Value::Nothing
Usage:
> nu-example-1 {flags} <a> <b> (opt) ...(rest)
Flags:
-h, --help - Display the help message for this command
-f, --flag - a flag for the signature
-n, --named <String> - named string
Parameters:
a <int>: required integer value
b <string>: required string value
(optional) opt <int>: Optional number
...rest <string>: rest value string
Examples:
running example with an int value and string value
> nu-example-1 3 bb
```
The examples session is newly added.
## Basic idea behind these changes
when nushell query plugin signatures, plugin just returns it's signature
without any examples, so nushell have no idea about the examples of
plugin commands.
To adding the feature, we just making plugin returns it's signature with
examples.
Before:
```
1. get signature
---------------->
Nushell ------------------ Plugin
<-----------------
2. returns Vec<Signature>
```
After:
```
1. get signature
---------------->
Nushell ------------------ Plugin
<-----------------
2. returns Vec<PluginSignature>
```
When writing plugin signature to $nu.plugin-path:
Serialize `<PluginSignature>` rather than `<Signature>`, which would
enable us to serialize examples to `$nu.plugin-path`
## Shortcoming
It's a breaking changes because `Plugin::signature` is changed, and it
requires plugin authors to change their code for new signatures.
Fortunally it should be easy to change, for rust based plugin, we just
need to make a global replace from word `Signature` to word
`PluginSignature` in their plugin project.
Our content of plugin-path is really large, if one plugin have many
examples, it'd results to larger body of $nu.plugin-path, which is not
really scale. A solution would be save register information in other
binary formats rather than `json`. But I think it'd be another story.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR will help report a bad date that can't be converted where the
error message says `* Unable to parse datetime`. This is helpful when
you're converting a big table and it fails somewhere that you really
can't see. I put it in `[]` so that when it's null, you can see that
there should be something there.
Before:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)
× Unable to parse datetime
╭─[entry #1:1:1]
1 │ 'Tue 1 0' | into datetime
· ────┬────
· ╰── datetime parsing failed
╰────
help: Examples of supported inputs:
* "5 pm"
* "2020/12/4"
* "2020.12.04 22:10 +2"
* "2020-04-12 22:10:57 +02:00"
* "2020-04-12T22:10:57.213231+02:00"
* "Tue, 1 Jul 2003 10:52:37 +0200"
```
After:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)
× Unable to parse datetime: [Tue 1 0].
╭─[entry #4:1:1]
1 │ 'Tue 1 0' | into datetime
· ────┬────
· ╰── datetime parsing failed
╰────
help: Examples of supported inputs:
* "5 pm"
* "2020/12/4"
* "2020.12.04 22:10 +2"
* "2020-04-12 22:10:57 +02:00"
* "2020-04-12T22:10:57.213231+02:00"
* "Tue, 1 Jul 2003 10:52:37 +0200"
```
# User-Facing Changes
New format for the error message.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#6768.
BEFORE:
```
〉{ foo: [{a:1, b:2},2,3,4,5] }
╭─────┬────────────────╮
│ foo │ [table 5 rows] │
╰─────┴────────────────╯
```
AFTER:
```
〉{ foo: [{a:1, b:2},2,3,4,5] }
╭─────┬────────────────╮
│ foo │ [list 5 items] │
╰─────┴────────────────╯
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Lint: `clippy::uninlined_format_args`
More readable in most situations.
(May be slightly confusing for modifier format strings
https://doc.rust-lang.org/std/fmt/index.html#formatting-parameters)
Alternative to #7865
# User-Facing Changes
None intended
# Tests + Formatting
(Ran `cargo +stable clippy --fix --workspace -- -A clippy::all -D
clippy::uninlined_format_args` to achieve this. Depends on Rust `1.67`)
I noticed that [it's pretty easy to name threads in
Rust](https://doc.rust-lang.org/std/thread/#naming-threads). We might as
well do this; it's a nice quality of life improvement when you're
profiling something and the developers took the time to give threads
names.
Also added/cleaned up some comments while I was in the area.
# Description
This PR bumps the required rust version to 1.66.1.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Small fix. Related: #7699.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds the `SyntaxShape::Decimal` so you can create custom commands
with `decimal` types such as:
```shell
def cmd [x:decimal] { echo $x }
```
/cc @kurokirasama
Internally this is a little messy since we have `Type::Float` and
`SyntaxShape::Decimal`. I originally named it `float` and
`SyntaxShape::Float` but since we have `into decimal` and `1.1 |
describe` reports `decimal`, I decided to change the SyntaxShape.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is an attempt to implement a new `Value::LazyRecord` variant for
performance reasons.
`LazyRecord` is like a regular `Record`, but it's possible to access
individual columns without evaluating other columns. I've implemented
`LazyRecord` for the special `$nu` variable; accessing `$nu` is
relatively slow because of all the information in `scope`, and [`$nu`
accounts for about 2/3 of Nu's startup time on
Linux](https://github.com/nushell/nushell/issues/6677#issuecomment-1364618122).
### Benchmarks
I ran some benchmarks on my desktop (Linux, 12900K) and the results are
very pleasing.
Nu's time to start up and run a command (`cargo build --release;
hyperfine 'target/release/nu -c "echo \"Hello, world!\""' --shell=none
--warmup 10`) goes from **8.8ms to 3.2ms, about 2.8x faster**.
Tests are also much faster! Running `cargo nextest` (with our very slow
`proptest` tests disabled) goes from **7.2s to 4.4s (1.6x faster)**,
because most tests involve launching a new instance of Nu.
### Design (updated)
I've added a new `LazyRecord` trait and added a `Value` variant wrapping
those trait objects, much like `CustomValue`. `LazyRecord`
implementations must implement these 2 functions:
```rust
// All column names
fn column_names(&self) -> Vec<&'static str>;
// Get 1 specific column value
fn get_column_value(&self, column: &str) -> Result<Value, ShellError>;
```
### Serializability
`Value` variants must implement `Serializable` and `Deserializable`, which poses some problems because I want to use unserializable things like `EngineState` in `LazyRecord`s. To work around this, I basically lie to the type system:
1. Add `#[typetag::serde(tag = "type")]` to `LazyRecord` to make it serializable
2. Any unserializable fields in `LazyRecord` implementations get marked with `#[serde(skip)]`
3. At the point where a `LazyRecord` normally would get serialized and sent to a plugin, I instead collect it into a regular `Value::Record` (which can be serialized)
# Description
Nothing changed, just fix some typos
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
I have changed `assert!(a == b)` calls to `assert_eq!(a, b)`, which give
better error messages. Similarly for `assert!(a != b)` and
`assert_ne!(a, b)`. Basically all instances were comparing primitives
(string slices or integers), so there is no loss of generality from
special-case macros,
I have also fixed a number of typos in comments, variable names, and a
few user-facing messages.
# Description
This PR allows the configuration of cursor shapes in nushell for each
edit mode. This is the change that is in the default_config.nu file.
```
cursor_shape: {
emacs: line # block, underscore, line (line is the default)
vi_insert: block # block, underscore, line (block is the default)
vi_normal: underscore # block, underscore, line (underscore is the default)
}
```
# User-Facing Changes
See above. If you'd prefer a different default, please speak up and let
us know.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
I implemented the status bar we talk about yesterday. The idea was
inspired by the progress bar of `wget`.
I decided to go for the second suggestion by `@Reilly`
> 2. add an Option<usize> or whatever to RawStream (and ListStream?) for
situations where you do know the length ahead of time
For now only works with the command `save` but after the approve of this
PR we can see how we can implement it on commands like `cp` and `mv`
When using `fetch` nushell will check if there is any `content-length`
attribute in the request header. If so, then `fetch` will send it
through the new `Option` variable in the `RawStream` to the `save`.
If we know the total size we show the progress bar
but if we don't then we just show the stats like: data already saved,
bytes per second, and time lapse.
Please let me know If I need to make any changes and I will be happy to
do it.
# User-Facing Changes
A new flag (`--progress` `-p`) was added to the `save` command
Examples:
```nu
fetch https://github.com/torvalds/linux/archive/refs/heads/master.zip | save --progress -f main.zip
fetch https://releases.ubuntu.com/22.04.1/ubuntu-22.04.1-desktop-amd64.iso | save --progress -f main.zip
open main.zip --raw | save --progress main.copy
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
-
I am getting some errors and its weird because the errors are showing up
in files i haven't touch. Is this normal?
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
Currently the implementation is different for Windows and Unix.
Thus certain operations will fail if the platform foreign line ending is
used:
example failing under windows
```
git show (git merge-base main HEAD)
```
Temporary cheat is to strip all `\r` and `\n` from the end. Proper
solution should trim them as correct patterns.
Also needed: test of behavior with both platform newline and
platform-foreign line endings
cc @WindSoilder
# User-Facing Changes
Line endings should be trimmed no matter the source and no matter the
platform
# Tests + Formatting
Still missing
src/main.rs has a dependency on BufferedReader
which is currently located in nu_command.
I am moving BufferedReader to a more relevant
location (crate) which will allow / eliminate main's dependency
on nu_command in a benchmark / testing environment...
now that @rgwood has landed benches I want
to start experimenting with benchmarks related
to the parser.
For benchmark purposes when dealing with parsing
you need a very simple set of commands that show
how well the parser is doing, in other words
just the core commands... Not all of nu_command...
Having a smaller nu binary when running the benchmark CI
would enable building nushell quickly, yet still show us
how well the parser is performing...
Once this PR lands the only dependency main will have
on nu_command is create_default_context ---
meaning for benchmark purposes we can swap in a tiny
crate of commands instead of the gigantic nu_command
which has its "own" create_default_context...
It will also enable other crates going forward to
use BufferedReader. Right now it is not accessible
to other lower level crates because it is located in a
"top of the stack crate".
Add recursion limit to `def` and `block`.
Summary of this PR , it will detect if `def` call itself or not .
Then execute by using `stack` which I think best choice to use with this
design and core as it is available in all crates and mutable and
calculate the recursion limit on calling `def`.
Set 50 as recursion limit on `Config`.
Add some tests too .
Fixes#5899
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
This closes#7498, as well as fixes an issue reported in
https://github.com/nushell/nushell/pull/7002#issuecomment-1368340773
BEFORE:
```
〉[{foo: 'bar'} {}] | get foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #5:1:1]
1 │ [{foo: 'bar'} {}] | get foo
· ────────┬──────── ─┬─
· │ ╰── value originates here
· ╰── cannot find column 'Empty cell'
╰────
〉[{foo: 'bar'} {}].foo
╭───┬─────╮
│ 0 │ bar │
│ 1 │ │
╰───┴─────╯
```
AFTER:
```
〉[{foo: 'bar'} {}] | get foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #1:1:1]
1 │ [{foo: 'bar'} {}] | get foo
· ─┬ ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
〉[{foo: 'bar'} {}].foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #3:1:1]
1 │ [{foo: 'bar'} {}].foo
· ─┬ ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
```
EDIT: This also changes the semantics of `get`/`select` `-i` somewhat.
I've decided to leave it like this because it works more intuitively
with `default` and `compact`.
BEFORE:
```
〉[{a:1} {b:2} {a:3}] | select -i foo | to nuon
null
```
AFTER:
```
〉[{a:1} {b:2} {a:3}] | select -i foo | to nuon
[[foo]; [null], [null], [null]]
```
# User-Facing Changes
See above. EDIT: the issue with holes in cases like ` [{foo: 'bar'}
{}].foo.0` versus ` [{foo: 'bar'} {}].0.foo` has been resolved.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
A tiny follow-up from https://github.com/nushell/nushell/pull/7623,
changes "Only supports for specific input types" to "Input type not
supported"
Before:
```
〉"asdf" | append "foo"
Error: nu:🐚:only_supports_this_input_type (link)
× Only supports for specific input types.
╭─[entry #2:1:1]
1 │ "asdf" | append "foo"
· ───┬── ───┬──
· │ ╰── only list, binary, raw data or range input data is supported
· ╰── input type: string
╰────
```
After:
```
〉"asdf" | append "foo"
Error: nu:🐚:only_supports_this_input_type (link)
× Input type not supported.
╭─[entry #2:1:1]
1 │ "asdf" | append "foo"
· ───┬── ───┬──
· │ ╰── only list, binary, raw data or range input data is supported
· ╰── input type: string
╰────
```
# Description
Inspired by #7592
For brevity use `Value::test_{string,int,float,bool}`
Includes fixes to commands that were abusing `Span::test_data` in their
implementation. Now the call span is used where possible or the explicit
`Span::unknonw` is used.
## Command fixes
- Fix abuse of `Span::test_data()` in `query_xml`
- Fix abuse of `Span::test_data()` in `term size`
- Fix abuse of `Span::test_data()` in `seq date`
- Fix two abuses of `Span::test_data` in `nu-cli`
- Change `Span::test_data` to `Span::unknown` in `keybindings listen`
- Add proper call span to `registry query`
- Fix span use in `nu_plugin_query`
- Fix span assignment in `select`
- Use `Span::unknown` instead of `test_data` in more places
## Other
- Use `Value::test_int`/`test_float()` consistently
- More `test_string` and `test_bool`
- Fix unused imports
# User-Facing Changes
Some commands may now provide more helpful spans for downstream use in
errors
Closes#7572 by adding a cache for compiled regexes of type
`Arc<Mutex<LruCache<String, Regex>>>` to `EngineState` .
The cache is limited to 100 entries (limit chosen arbitrarily) and
evicts least-recently-used items first.
This PR makes a noticeable difference when using regexes for
`color_config`, e.g.:
```bash
#first set string formatting in config.nu like:
string: { if $in =~ '^#\w{6}$' { $in } else { 'white' } }`
# then try displaying and exploring a table with many strings
# this is instant after the PR, but takes hundreds of milliseconds before
['#ff0033', '#0025ee', '#0087aa', 'string', '#4101ff', '#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff', '#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff', '#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff', '#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff']
```
## New dependency (`lru`)
This uses [the popular `lru` crate](https://lib.rs/crates/lru). The new
dependency adds 19.8KB to a Linux release build of Nushell. I think this
is OK, especially since the crate can be useful elsewhere in Nu.
# Description
* I was dismayed to discover recently that UnsupportedInput and
TypeMismatch are used *extremely* inconsistently across the codebase.
UnsupportedInput is sometimes used for input type-checks (as per the
name!!), but *also* used for argument type-checks. TypeMismatch is also
used for both.
I thus devised the following standard: input type-checking *only* uses
UnsupportedInput, and argument type-checking *only* uses TypeMismatch.
Moreover, to differentiate them, UnsupportedInput now has *two* error
arrows (spans), one pointing at the command and the other at the input
origin, while TypeMismatch only has the one (because the command should
always be nearby)
* In order to apply that standard, a very large number of
UnsupportedInput uses were changed so that the input's span could be
retrieved and delivered to it.
* Additionally, I noticed many places where **errors are not propagated
correctly**: there are lots of `match` sites which take a Value::Error,
then throw it away and replace it with a new Value::Error with
less/misleading information (such as reporting the error as an
"incorrect type"). I believe that the earliest errors are the most
important, and should always be propagated where possible.
* Also, to standardise one broad subset of UnsupportedInput error
messages, who all used slightly different wordings of "expected
`<type>`, got `<type>`", I created OnlySupportsThisInputType as a
variant of it.
* Finally, a bunch of error sites that had "repeated spans" - i.e. where
an error expected two spans, but `call.head` was given for both - were
fixed to use different spans.
# Example
BEFORE
```
〉20b | str starts-with 'a'
Error: nu:🐚:unsupported_input (link)
× Unsupported input
╭─[entry #31:1:1]
1 │ 20b | str starts-with 'a'
· ┬
· ╰── Input's type is filesize. This command only works with strings.
╰────
〉'a' | math cos
Error: nu:🐚:unsupported_input (link)
× Unsupported input
╭─[entry #33:1:1]
1 │ 'a' | math cos
· ─┬─
· ╰── Only numerical values are supported, input type: String
╰────
〉0x[12] | encode utf8
Error: nu:🐚:unsupported_input (link)
× Unsupported input
╭─[entry #38:1:1]
1 │ 0x[12] | encode utf8
· ───┬──
· ╰── non-string input
╰────
```
AFTER
```
〉20b | str starts-with 'a'
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #1:1:1]
1 │ 20b | str starts-with 'a'
· ┬ ───────┬───────
· │ ╰── only string input data is supported
· ╰── input type: filesize
╰────
〉'a' | math cos
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #2:1:1]
1 │ 'a' | math cos
· ─┬─ ────┬───
· │ ╰── only numeric input data is supported
· ╰── input type: string
╰────
〉0x[12] | encode utf8
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #3:1:1]
1 │ 0x[12] | encode utf8
· ───┬── ───┬──
· │ ╰── only string input data is supported
· ╰── input type: binary
╰────
```
# User-Facing Changes
Various error messages suddenly make more sense (i.e. have two arrows
instead of one).
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Currently, `filesize_format`/`filesize_metric` conflicts are resolved as
follows: if the `filesize_format` ends in "ib", then that overrides
`filesize_metric`, otherwise, `filesize_metric` overrides
`filesize_format`. This removes this difficult-to-predict asymmetric
behaviour, and makes it so that `filesize_metric` always overrides
`filesize_format`.
This also adds tests for `$env.config.filesize.format` and
`$env.config.filesize.metric` values.
REMINDER: `filesize_metric` means "increments of 1000", and refers to
KB-MB-GB-TB etc.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
A follow-up to #7497. That change made it so that `get foo` would
eliminate non-record rows; I think that was an unintentional and
undesirable side-effect.
Before #7497:
```bash
〉[$nothing, { item: "foo" }] | get item
╭───┬─────╮
│ 0 │ │
│ 1 │ foo │
╰───┴─────╯
```
After #7497:
```bash
〉[$nothing, {item: "foo"}] | get item
╭───┬─────╮
│ 0 │ foo │
╰───┴─────╯
```
After this PR:
```bash
〉[$nothing, { item: "foo" }] | get item
╭───┬─────╮
│ 0 │ │
│ 1 │ foo │
╰───┴─────╯
```
cc: @merelymyself
# Description
Closes#6909. You can now add closures to your `color_config` themes.
Whenever a value would be printed with `table`, the closure is run with
the value piped-in. The closure must return either a {fg,bg,attr} record
or a color name (`'light_red'` etc.). This returned style is used to
colour the value.
This is entirely backwards-compatible with existing config.nu files.
Example code excerpt:
```
let my_theme = {
header: green_bold
bool: { if $in { 'light_cyan' } else { 'light_red' } }
int: purple_bold
filesize: { |e| if $e == 0b { 'gray' } else if $e < 1mb { 'purple_bold' } else { 'cyan_bold' } }
duration: purple_bold
date: { (date now) - $in | if $in > 1wk { 'cyan_bold' } else if $in > 1day { 'green_bold' } else { 'yellow_bold' } }
range: yellow_bold
string: { if $in =~ '^#\w{6}$' { $in } else { 'white' } }
nothing: white
```
Example output with this in effect:
Slightly important notes:
* Some color_config names, namely "separator", "empty" and "hints", pipe
in `null` instead of a value.
* Currently, doing anything non-trivial inside a closure has an
understandably big perf hit. I currently do not actually recommend
something like `string: { if $in =~ '^#\w{6}$' { $in } else { 'white' }
}` for serious work, mainly because of the abundance of string-type data
in the world. Nevertheless, lesser-used types like "date" and "duration"
work well with this.
* I had to do some reorganisation in order to make it possible to call
`eval_block()` that late in table rendering. I invented a new struct
called "StyleComputer" which holds the engine_state and stack of the
initial `table` command (implicit or explicit).
* StyleComputer has a `compute()` method which takes a color_config name
and a nu value, and always returns the correct Style, so you don't have
to worry about A) the color_config value was set at all, B) whether it
was set to a closure or not, or C) which default style to use in those
cases.
* Currently, errors encountered during execution of the closures are
thrown in the garbage. Any other ideas are welcome. (Nonetheless, errors
result in a huge perf hit when they are encountered. I think what should
be done is to assume something terrible happened to the user's config
and invalidate the StyleComputer for that `table` run, thus causing
subsequent output to just be Style::default().)
* More thorough tests are forthcoming - ran into some difficulty using
`nu!` to take an alternative config, and for some reason `let-env config
=` statements don't seem to work inside `nu!` pipelines(???)
* The default config.nu has not been updated to make use of this yet. Do
tell if you think I should incorporate that into this.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7494.
```
/home/gabriel/CodingProjects/nushell〉[[{foo: bar}]] | get foo 12/16/2022 12:31:17 PM
Error: nu::parser::not_found (link)
× Not found.
╭─[entry #1:1:1]
1 │ [[{foo: bar}]] | get foo
· ───────┬──────
· ╰── did not find anything under this name
╰────
```
# User-Facing Changes
cell paths no longer drill into nested tables.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
## Fix `nu-path` usage in `nu!` testing macro
The `nu-path` crate needs to be properly re-exported so the generated
code is valid if `nu-path` is not present among the dependencies of the
using crate.
Usage of crates in `macro_rules!` macros has to follow the
`$crate::symbol_in_crate` path pattern (With an absolute path-spec also
for macros defined in submodules)
## Move `nu-test-support` to devdeps in `nu-protocol`
Also remove the now unnecessary direct dependency on `nu-path`.
`nu!` macro had to be changed to make it a proper transitive dependency.
I've been working on streaming and pipeline interruption lately. It was
bothering me that checking ctrl+c (something we want to do often) always
requires a bunch of boilerplate like:
```rust
use std::sync::atomic::Ordering;
if let Some(ctrlc) = &engine_state.ctrlc {
if ctrlc.load(Ordering::SeqCst) {
...
```
I added a helper method to cut that down to:
```rust
if nu_utils::ctrl_c::was_pressed(&engine_state.ctrlc) {
...
```
# Description
Just spot that there are some duplicate code about checking external
runs to failed, is pr is trying to refactor it and reduce lines of code
# User-Facing Changes
NaN
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds missing items in `parse_shape_name`, sorts the
`SyntaxShape` enum and the `Type` enum. It's a pain to hunt around for
particular items in an enum when they're unsorted.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#6773.
```
/home/gabriel/CodingProjects/nushell〉ls -r 12/12/2022 02:57:35 PM
Error: nu::parser::unknown_flag (link)
× The `ls` command doesn't have flag `-r`.
╭─[entry #1:1:1]
1 │ ls -r
· ┬
· ╰── unknown flag
╰────
help: Available flags: --help(-h), --all(-a), --long(-l), --short-names(-s), --full-paths(-f), --du(-d), --directory(-D). Use `--help` for more information.
```
# User-Facing Changes
Different error for unknown flag.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Reverts nushell/nushell#7448
Some surprising behavior in how we do this. For example:
```
〉if (true || false) { print "yes!" } else { print "no!" }
no!
〉if (true or false) { print "yes!" } else { print "no!" }
yes!
```
This means for folks who are using the old `||`, they possibly get the
wrong answer once they upgrade. I don't think we can ship with that as
it will catch too many people by surprise and just make it easier to
write buggy code.
# Description
We got some feedback from folks used to other shells that `try/catch`
isn't quite as convenient as things like `||`. This PR adds `&&` as a
synonym for `;` and `||` as equivalent to what `try/catch` would do.
# User-Facing Changes
Adds `&&` and `||` pipeline operators.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
When running `nu script.nu`, the `$env.FILE_PWD` will be set to the
directory where the script is.
Also makes the error message a bit nicer:
```
> target/debug/nu asdihga
Error: nu:🐚:file_not_found (link)
× File not found
╭─[source:1:1]
1 │ nu
· ▲
· ╰── Could not access file 'asdihga': "No such file or directory (os error 2)"
╰────
```
# User-Facing Changes
`FILE_PWD` environment variable is available when running a script as
`nu script.nu`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR moves the `where` command to a parser keyword. While it still
uses the shape-directed parsing dictated by the signature, we're free to
change the parsing code now to a custom one once we remove the syntax
shapes.
As a side effect, the `where -b` flag was removed and its functionality
has moved to the new `filter` command.
Just FYI, other commands that take row conditions:
- `take until`
- `take while`
- `skip until`
- `skip while`
- `any`
- `all`
We can either move these to the parser as well or make them accept a
closure instead of row condition.
# User-Facing Changes
New `filter` command which replaces `where -b` functionality.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#7059. Rather than generate a new Record each time $env.config is
accessed (as described in that issue), instead `$env.config = ` now A)
parses the input record, then B) un-parses it into a clean Record with
only the valid values, and stores that as an env-var. The reasoning for
this is that I believe `config_to_nu_record()` (the method that performs
step B) will be useful in later PRs. (See below)
As a result, this also "fixes" the following "bug":
```
〉$env.config = 'butts'
$env.config is not a record
〉$env.config
butts
```
~~Instead, `$env.config = 'butts'` now turns `$env.config` into the
default (not the default config.nu, but `Config::default()`, which
notably has empty keybindings, color_config, menus and hooks vecs).~~
This doesn't attempt to fix#7110. cc @Kangaxx-0
# Example of new behaviour
OLD:
```
〉$env.config = ($env.config | merge { foo: 1 })
$env.config.foo is an unknown config setting
〉$env.config.foo
1
```
NEW:
```
〉$env.config = ($env.config | merge { foo: 1 })
Error:
× Config record contains invalid values or unknown settings
Error:
× Error while applying config changes
╭─[entry #1:1:1]
1 │ $env.config = ($env.config | merge { foo: 1 })
· ┬
· ╰── $env.config.foo is an unknown config setting
╰────
help: This value has been removed from your $env.config record.
〉$env.config.foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #1:1:1]
1 │ $env.config = ($env.config | merge { foo: 1 })
· ──┬──
· ╰── value originates here
╰────
╭─[entry #2:1:1]
1 │ $env.config.foo
· ─┬─
· ╰── cannot find column 'foo'
╰────
```
# Example of new errors
OLD:
```
$env.config.cd.baz is an unknown config setting
$env.config.foo is an unknown config setting
$env.config.bar is an unknown config setting
$env.config.table.qux is an unknown config setting
$env.config.history.qux is an unknown config setting
```
NEW:
```
Error:
× Config record contains invalid values or unknown settings
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:267:1]
267 │ abbreviations: true # allows `cd s/o/f` to expand to `cd some/other/folder`
268 │ baz: 3,
· ┬
· ╰── $env.config.cd.baz is an unknown config setting
269 │ }
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:269:1]
269 │ }
270 │ foo: 1,
· ┬
· ╰── $env.config.foo is an unknown config setting
271 │ bar: 2,
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:270:1]
270 │ foo: 1,
271 │ bar: 2,
· ┬
· ╰── $env.config.bar is an unknown config setting
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:279:1]
279 │ }
280 │ qux: 4,
· ┬
· ╰── $env.config.table.qux is an unknown config setting
281 │ }
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:285:1]
285 │ file_format: "plaintext" # "sqlite" or "plaintext"
286 │ qux: 2
· ┬
· ╰── $env.config.history.qux is an unknown config setting
287 │ }
╰────
help: This value has been removed from your $env.config record.
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While perusing Value.rs, I noticed the `Value::int()`, `Value::float()`,
`Value::boolean()` and `Value::string()` constructors, which seem
designed to make it easier to construct various Values, but which aren't
used often at all in the codebase. So, using a few find-replaces
regexes, I increased their usage. This reduces overall LOC because
structures like this:
```
Value::Int {
val: a,
span: head
}
```
are changed into
```
Value::int(a, head)
```
and are respected as such by the project's formatter.
There are little readability concerns because the second argument to all
of these is `span`, and it's almost always extremely obvious which is
the span at every callsite.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
fixes#7384
This is a stop-gap fix until we remove type-directed parsing. With this,
you can create a `OneOf` shape that can be one of a list of syntax
shapes. This gives you a little more control than you get with `Any`,
allowing you to add `Block` without breaking other parsing rules.
# User-Facing Changes
`else` block will no longer capture variables as it will now use a block
instead of a closure.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fix changes pipelines to allow them to actually be empty. Mapping
over empty pipelines gives empty pipelines. Empty pipelines immediately
return `None` when iterated.
This removes a some of where `Span::new(0, 0)` was coming from, though
there are other cases where we still use it.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#7110. ~~Note that unlike "real" `mut` vars, $env can be deeply
mutated via stuff like `$env.PYTHON_IO_ENCODING = utf8` or
`$env.config.history.max_size = 2000`. So, it's a slightly awkward
special case, arguably justifiable because of what $env represents (the
environment variables of your system, which is essentially "outside"
normal Nushell regulations).~~
EDIT: Now allows all `mut` vars to be deeply mutated using `=`, on
request.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
After the 0.72.1 hotfix, let's bump our dev builds to 0.72.2.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
FIx the typo of `List` and also add more comments to other variants
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Also enforce this by #[non_exhaustive] span such that going forward we
cannot, in debug builds (1), construct invalid spans.
The motivation for this stems from #6431 where I've seen crashes due to
invalid slice indexing.
My hope is this will mitigate such senarios
1. https://github.com/nushell/nushell/pull/6431#issuecomment-1278147241
# Description
(description of your pull request here)
# Tests
Make sure you've done the following:
- [ ] Add tests that cover your changes, either in the command examples,
the crate/tests folder, or in the /tests folder.
- [ ] Try to think about corner cases and various ways how your changes
could break. Cover them with tests.
- [ ] If adding tests is not possible, please document in the PR body a
minimal example with steps on how to reproduce so one can verify your
change works.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [ ] `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- [ ] `cargo test --workspace --features=extra` to check that all the
tests pass
# Documentation
- [ ] If your PR touches a user-facing nushell feature then make sure
that there is an entry in the documentation
(https://github.com/nushell/nushell.github.io) for the feature, and
update it if necessary.
Fixes#7246 and #1898.
Darren noticed that `open /dev/random` could not be interrupted by
`ctrl+c`. Thankfully the solution was very simple; it looks like we just
forgot to check `ctrlc` in the `impl Iterator for RawStream`!
To reproduce this, just run `open /dev/random` and then cancel it with
`ctrl+c`.
# Description
* `$env.config.explore_config` renamed to `$env.config.explore`. This
follows the principle that config subrecords relating to single commands
(as this relates to `explore`) should be exactly named after the command
(see `ls`, `rm`, `table` etc.)
* In `into_config()`, moved the match arm relating to
`$env.config.explore` out of the "legacy options" section (which is
slated for removal in a later version).
# User-Facing Changes
`explore` is not in any public releases yet, so this has no end-user
impact.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Just bumping to the next dev version. Submitting as a draft until we're
ready.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
chrono version update
# Description
upgrade chrono to 0.4.23
# Major Changes
If you're considering making any major change to nushell, before
starting work on it, seek feedback from regular contributors and get
approval for the idea from the core team either on
[Discord](https://discordapp.com/invite/NtAbbGn) or [GitHub
issue](https://github.com/nushell/nushell/issues/new/choose).
Making sure we're all on board with the change saves everybody's time.
Thanks!
# Tests + Formatting
Make sure you've done the following, if applicable:
- Add tests that cover your changes (either in the command examples, the
crate/tests folder, or in the /tests folder)
- Try to think about corner cases and various ways how your changes
could break. Cover those in the tests
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
* Help us keep the docs up to date: If your PR affects the user
experience of Nushell (adding/removing a command, changing an
input/output type, etc.), make sure the changes are reflected in the
documentation (https://github.com/nushell/nushell.github.io) after the
PR is merged.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
We already have the binary `bit-xor` and the shortcircuiting logical
`or`(`||`) and `and`(`&&`).
This introduces `xor` as a compact form for both brevity and clarity.
You can express the operation through `not`/`and`/`or` with a slight
risk of introducing bugs through typos.
Operator precedence
`and` > `xor` > `or`
Added logic and precedence tests.
# Description
This command converts things into records.
<img width="466" alt="Screenshot 2022-11-24 at 2 10 54 PM"
src="https://user-images.githubusercontent.com/343840/203858104-0e4445da-9c37-4c7c-97ec-68ec3515bc4b.png">
<img width="716" alt="Screenshot 2022-11-24 at 5 04 11 PM"
src="https://user-images.githubusercontent.com/343840/203872621-48cab199-ba57-44fe-8f36-9e1469b9c4ef.png">
It also converts dates into record but I couldn't get the test harness
to accept an example.
Thanks to @WindSoilder for writing the "hard" parts of this. :)
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
# Description
This makes the help messages cleaner for keyword-style arguments.
Before:
```
(optional) else_expression <Keyword([101, 108, 115, 101], Expression)>: expression or block to run if check fails
```
Now:
```
(optional) "else" + <expression>: expression or block to run if check fails
```
# User-Facing Changes
Changes how help is printed, so we use slightly different shape names
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds `break`, `continue`, `return`, and `loop`.
* `break` - breaks out a loop
* `continue` - continues a loop at the next iteration
* `return` - early return from a function call
* `loop` - loop forever (until the loop hits a break)
Examples:
```
for i in 1..10 {
if $i == 5 {
continue
}
print $i
}
```
```
for i in 1..10 {
if $i == 5 {
break
}
print $i
}
```
```
def foo [x] {
if true {
return 2
}
$x
}
foo 100
```
```
loop { print "hello, forever" }
```
```
[1, 2, 3, 4, 5] | each {|x|
if $x > 3 { break }
$x
}
```
# User-Facing Changes
Adds the above commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, when execute external sub command, auto-trimming end
new-lines, like how fish shell does.
And if the command is executed directly like: `cat tmp`, the result
won't change.
Fixes: #6816Fixes: #3980
Note that although nushell works correctly by directly replace output of
external command to variable(or other places like string interpolation),
it's not friendly to user, and users almost want to use `str trim` to
trim trailing newline, I think that's why fish shell do this
automatically.
If the pr is ok, as a result, no more `str trim -r` is required when
user is writing scripts which using external commands.
# User-Facing Changes
Before:
<img width="523" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468810-86b04dbb-c147-459a-96a5-e0095eeaab3d.png">
After:
<img width="505" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468599-7b537488-3d6b-458e-9d75-d85780826db0.png">
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This adds new pipeline connectors called out> and err> which redirect either stdout or stderr to a file. You can also use out+err> (or err+out>) to redirect both streams into a file.
* Make json require string and pass around metadata
The json deserializer was accepting any inputs by coercing non-strings
into strings. As an example, if the input was `[1, 2]` the coercion
would turn into `[12]` and deserialize as a list containing number
twelve instead of a list of two numbers, one and two. This could lead
to silent data corruption.
Aside from that pipeline metadata wasn't passed aroud.
This commit fixes the type issue by adding a strict conversion
function that errors if the input type is not a string or external
stream. It then uses this function instead of the original
`collect_string()`. In addition, this function returns the pipeline
metadata so it can be passed along.
* Make other formats require string
The problem with json coercing non-string types to string was present in
all other text formats. This reuses the `collect_string_strict` function
to fix them.
* `IntoPipelineData` cleanup
The method `into_pipeline_data_with_metadata` can now be conveniently
used.
* add signature information when help on one command
* tell user that one command support operated on cell paths
Also, make type output to be more friendly, like `record<>` should just be `record`
And the same to `table<>`, which should be `table`
* simplify code
* don't show signatures for parser keyword
* update comment
* output arg syntax shape as type, so it's the same as describe command
* fix string when no positional args
* update signature body
* update
* add help signature test
* fix arg output format for composed data type like list or record
* fix clippy
* add comment
* Grouped config commands better
* Tweaked test slightly
* Fix merge conflict(?)
* Remove recently-added test case
* Revert rm.always_trash default
* Untweak rm help messages
* Formatting
* Remove example
* Add deprecation warning
* Remove deprecation timeline
Not sure we want to commit to a specific timeline just yet
Co-authored-by: Reilly Wood <26268125+rgwood@users.noreply.github.com>
* removes unused features.
* Adds back multithreading feature to sysinfo.
* Adds back alloc for percent-encoding
* Adds updated lock file.
* Missed one sysinfo.
* `indexmap` just defaults
* Revert `miette``default-features=false`
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
This adds support for (limited) mutable variables. Mutable variables are created with mut much the same way immutable variables are made with let.
Mutable variables allow mutation via the assignment operator (=).
❯ mut x = 100
❯ $x = 200
❯ print $x
200
Mutable variables are limited in that they're only tended to be used in the local code block. Trying to capture a local variable will result in an error:
❯ mut x = 123; {|| $x }
Error: nu::parser::expected_keyword (link)
× Capture of mutable variable.
The intent of this limitation is to reduce some of the issues with mutable variables in general: namely they make code that's harder to reason about. By reducing the scope that a mutable variable can be used it, we can help create local reasoning about them.
Mutation can occur with fields as well, as in this case:
❯ mut y = {abc: 123}
❯ $y.abc = 456
❯ $y
On a historical note: mutable variables are something that we resisted for quite a long time, leaning as much as we could on the functional style of pipelines and dataflow. That said, we've watched folks struggle to work with reduce as an approximation for patterns that would be trivial to express with local mutation. With that in mind, we're leaning towards the happy path.
- Custom commands are true for builtin and custom
- Add classification as external command
- Specify wildcard in keyword: keyword is true for builtin and keyword
* Add failing test that list of ints and floats is List<Number>
* Start defining subtype relation
* Make it possible to declare input and output types for commands
- Enforce them in tests
* Declare input and output types of commands
* Add formatted signatures to `help commands` table
* Revert SyntaxShape::Table -> Type::Table change
* Revert unnecessary derive(Hash) on SyntaxShape
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* New "display_output" hook.
* Fix unrelated "clippy" complaint in nu-tables crate.
* Fix code-formattng and style issues in "display_output" hook
* Enhance eval_hook to return PipelineData.
This allows a hook (including display_output) to return a value.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* Remove unused dependencies
Inspired by #6938 ran `cargo +nightly udeps --features extra`.
Removes 2 crates and should remove an unnecessary intra-workspace
dependency which might open up further opportunities for compilation.
* Make windows-only dependency conditional in toml
`omnipath` is only used on Windows and already behind a `#[cfg]` block
in the code. Made the dependency in `Cargo.toml` conditional as well.
* Make `nu-pretty-hex` example a proper example
This allows making `rand` a dev-dependency in this crate.
Disable backtrace on miette
- gimli crate requires several seconds
Disable diagnostics on wax
- depends on an outdated miette version
Builds fine, no observable loss in diagnostics quality of life
Removes 10 crates that have to be compiled.
* Add support to render right prompt on last line of the prompt
* reset reedline to main branch
* update reedline to fix right prompt to be rendered correctly
* reset reedline to main branch again
* Revert "Revert "Try again: in unix like system, set foreground process while running external command (#6273)" (#6542)"
This reverts commit 2bb367f570.
* Make foreground job control hopefully work correctly
These changes are mostly inspired by the glibc manual.
* Fix typo in external command description
* Only restore tty control to shell when no fg procs are left; reuse pgrp
* Rework terminal acquirement code to be like fish
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* remove export_env command
* remove several export env usage in test code
* adjust hiding relative test case
* fix clippy
* adjust tests
* update tests
* unignore these tests to expose ut failed
* using `use` instead of `overlay use` in some tests
* Revert "using `use` instead of `overlay use` in some tests"
This reverts commit 2ae24b24c3.
* Revert "adjust hiding relative test case"
This reverts commit 4369af6d05.
* Bring back module example
* Revert "update tests"
This reverts commit 6ae94ef513.
* Fix tests
* "Fix" a test
* Remove remaining deprecated env functionality
* Re-enable environment hiding for `hide`
To not break virtualenv since the overlay update is not merged yet
* Fix hiding env in `hide` and ignore some tests
Co-authored-by: kubouch <kubouch@gmail.com>
* Copy lev_distance.rs from the rust compiler
* Minor changes to code from rust compiler
* "Did you mean" suggestions: test instrumented to generate markdown report
* Did you mean suggestions: delete test instrumentation
* Fix tests
* Fix test
`foo` has a genuine match: `for`
* Improve tests
* Add a 'commandline' command for manipulating the current buffer
from `executehostcommand` keybindings. Inspired by fish:
https://fishshell.com/docs/current/cmds/commandline.html
* Update to development reedline
Includes nushell/reedline#472
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* Add source-env test for dynamic path
* Use correct module ID for env overlay imports
* Remove parser check from "overlay list"
It would cause unnecessary errors from some inner scope if some
overlay module was also defined in some inner scope.
* Restore Cargo.lock back
* Remove comments
* add new function to remove data at a cellpath; allow reject to use cellpath
* add tests
* fmt
* fix clippt
* get it working properly with lists of records
* fix clippy, hopefully
* fix clippy, hopefully 2
* start working on source-env
* WIP
* Get most tests working, still one to go
* Fix file-relative paths; Report parser error
* Fix merge conflicts; Restore source as deprecated
* Tests: Use source-env; Remove redundant tests
* Fmt
* Respect hidden env vars
* Fix file-relative eval for source-env
* Add file-relative eval to "overlay use"
* Use FILE_PWD only in source-env and "overlay use"
* Ignore new tests for now
This will be another issue
* Throw an error if setting FILE_PWD manually
* Fix source-related test failures
* Fix nu-check to respect FILE_PWD
* Fix corrupted spans in source-env shell errors
* Fix up some references to old source
* Remove deprecation message
* Re-introduce deleted tests
Co-authored-by: kubouch <kubouch@gmail.com>
* Add hide-env to hide env vars; Cleanup tests
Also, there were some old unalias tests that I converted to hide.
* Add missing file
* Re-enable hide for env vars
* Fix test
* Rename did you mean error back
It was causing random tests to break
* Add decimals to int when using `into string --decimals`
* Add tests for `into string` when converting int with `--decimals`
* Apply formatting
* Merge `into_str` test files
* Comment out unused code and add TODOs
* Use decimal separator depending on system locale
* Add test helper to run closure in different locale
* Add tests for int-to-string conversion using different locales
* Add utils function to get system locale
* Add panic message when locking mutex fails
* Catch and resume panic later to prevent Mutex poisoning when test fails
* Move test to `nu-test-support` to keep `nu-utils` free of `nu-*` dependencies
See https://github.com/nushell/nushell/pull/6085#issuecomment-1193131694
* Rename test support fn `with_fake_locale` to `with_locale_override`
* Move `get_system_locale()` to `locale` module
* Allow overriding locale with special env variable (when not in release)
* Use special env var to override locale during testing
* Allow callback to return a value in `with_locale_override()`
* Allow multiple options in `nu!` macro
* Allow to set locale as `nu!` macro option
* Use new `locale` option of `nu!` macro instead of `with_locale_override`
Using the `locale` options does not lock the `LOCALE_OVERRIDE_MUTEX`
mutex in `nu-test-support::locale_override` but instead calls the `nu`
command directly with the `NU_LOCALE_OVERRIDE` environment variable.
This allows for parallel test excecution.
* Fix: Add option identifier for `cwd` in usage of `nu!` macro
* Rely on `Display` trait for formatting `nu!` macro command
- Removed the `DisplayPath` trait
- Implement `Display` for `AbsolutePath`, `RelativePath` and
`AbsoluteFile`
* Default to locale `en_US.UTF-8` for tests when using `nu!` macro
* Add doc comment to `nu!` macro
* Format code using `cargo fmt --all`
* Pass function directly instead of wrapping the call in a closure
https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure
* Pass function to `or_else()` instead of calling it inside `or()`
https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
* Fix: Add option identifier for `cwd` in usage of `nu!` macro
* add a new welcome banner to nushell
* remove top line
* tweaked colors and wording
* changed to dimmed white
* removed a comment
* make config nu stand out a little
* fix type-o
* Allow private imports inside modules
Can call `use ...` inside modules now.
* Add more tests
* Add a leak test
* Refactor exportables; Prepare for 'export use'
* Fix description
* Implement 'export use' command
This allows re-exporting module's commands and aliases from another
module.
* Add more tests; Fix import pattern list strings
The import pattern strings didn't trim the surrounding quotes.
* Add ignored test
* expand durations to include month, year, decade
* remove commented out fn
* oops, found more debug comments
* tweaked tests for the new way, borrowed heavily from chrono-humanize-rs
* clippy
* grammar
* Simplify PipelineData::print
Signed-off-by: nibon7 <nibon7@163.com>
* make write_all_and_flush to be associated function
Signed-off-by: nibon7 <nibon7@163.com>
* Remove comment
* Split delta and environment merging
* Move table mode to a more logical place
* Cleanup
* Merge environment after reading default_env.nu
* Fmt
* Allow keeping selected env from removed overlay
* Remove some duplicate code
* Change --keep-all back to --keep-custom
Because, apparently, you cannot have a named flag called --keep-all,
otherwise tests fail?
* Fix missing line and wrong test value
* add bytes collect
* index_of support searching from end
* add bytes remove
* make bytes replace work better for empty pattern
* add bytes build
* remove comment
* tweak words
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* (WIP) Initial messy support for hooks as strings
* Cleanup after running condition & hook code
Also, remove prints
* Move env hooks eval into its own function
* Add env change hooks to simulator
* Fix hooks simulator not running env hooks properly
* Add missing hooks test file
* Expand hooks tests
* Add blocks as env hooks; Preserve hook environment
* Add full eval to pre prompt/exec hooks; Fix panic
* Rename env change hook back to orig. name
* Print err on test failure; Add list of hooks test
* Consolidate condition block; Fix panic; Misc
* CHange test to use real file
* Remove unused stuff
* Fix potential panics; Clean up errors
* Remove commented unused code
* Clippy: Fix extra references
* Add back support for old-style hooks
* Reorder functions; Fmt
* Fix test on Windows
* Add more test cases; Simplify some error reporting
* Add more tests for setting correct before/after
* Move pre_prompt hook to the beginning
Since we don't have a prompt or blocking on user input, all hooks just
follow after each other.
* adds `capture-errors` flag for `do`
* adds `get-type` core command to get type
* fmt
* add tests in example
* fmt
* fix tests
* manually revert previous changes related to `get-type`
* adds method to check for error name using `into string`
* fix clippy
* feat: deprecate `hash base64` command
* feat: extend `decode` and `encode` command families
This commit
- Adds `encode` command family
- Backports `hash base64` features to `encode base64` and `decode base64` subcommands.
- Refactors code a bit and extends tests for encodings
- `decode base64` returns a binary `Value` (that may be decoded into a string using `decode` command)
* feat: add `--binary(-b)` flag to `decode base64`
Default output type is now string, but binary can be requested using this new flag.
This PR adds support for an SQLite history via nushell/reedline#401
The SQLite history is enabled by setting history_file_format: "sqlite" in config.nu.
* somewhat working sqlite history
* Hook up history command
* Fix error in SQlitebacked with empty lines
When entering an empty line there previously was the "No command run"
error with `SqliteBackedHistory` during addition of the metadata
May be considered a temporary fix
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* 06-07-wsl
* 06-07-linux-issue-with-delete-input
* 06-08-2023
* 06-08-Linux
* commit for merge
* Fix unit test
* format
* clean code
* Add flag to turn off external completion
* change env var to config
* Fix comment
Co-authored-by: Frank Zhang <v-frankz@microsoft.com>
* attempts to add `div` math operator
* allows `//` to be used too
* fmt:
* clippy issue
* returns appropriate type
* returns appropriate type 2
* fmt
* ensure consistency; rename to `fdiv`
* Update parser.rs
* input and output tests
* input and output types for dfr
* expression converter
* remove deprecated command
* correct expressions
* cargo clippy
* identifier for ls
* cargo clippy
* type for head and tail expression
* modify full cell path if block
* Differentiate internal signature from external signature w.r.t. help
* Add in the --help flag to default externs in default config
* Remove unusued build_extern
Co-authored-by: mjclements <clements.michael.james@gmail.com>
* Allow env vars to be kept from removed overlay
* Rename --keep to --keep-custom; Add new test
* Rename some symbols
* (WIP) Start working on --keep for defs and aliases
* Fix decls/aliases not melting properly
* Use id instead of the whole cloned overlay
* Rewrite overlay remove for no reason
Doesn't fix the bug but at least looks better.
* Rename variable
* Fix adding overlay env vars
* Add more tests; Fmt + Clippy
* Change miette theme based on ANSI config
Use the base ansi colors to simplify the use of the terminal emulator
theming.
Turn of most eye-candy (including unicode) when using
`$config.use_ansi_coloring: false`
Addresses #5582
* Fix error test affected by changed styling
* lazyframe definition
* expressions and lazy frames
* new alias expression
* more expression commands
* updated to polars main
* more expressions and groupby
* more expressions, fetch and sort-by
* csv reader
* removed open csv
* unique function
* joining functions
* join lazy frames commands with eager commands
* corrected tests
* Update .gitignore
* Update .gitignore
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* WIP: Start laying overlays
* Rename Overlay->Module; Start adding overlay
* Revamp adding overlay
* Add overlay add tests; Disable debug print
* Fix overlay add; Add overlay remove
* Add overlay remove tests
* Add missing overlay remove file
* Add overlay list command
* (WIP?) Enable overlays for env vars
* Move OverlayFrames to ScopeFrames
* (WIP) Move everything to overlays only
ScopeFrame contains nothing but overlays now
* Fix predecls
* Fix wrong overlay id translation and aliases
* Fix broken env lookup logic
* Remove TODOs
* Add overlay add + remove for environment
* Add a few overlay tests; Fix overlay add name
* Some cleanup; Fix overlay add/remove names
* Clippy
* Fmt
* Remove walls of comments
* List overlays from stack; Add debugging flag
Currently, the engine state ordering is somehow broken.
* Fix (?) overlay list test
* Fix tests on Windows
* Fix activated overlay ordering
* Check for active overlays equality in overlay list
This removes the -p flag: Either both parser and engine will have the
same overlays, or the command will fail.
* Add merging on overlay remove
* Change help message and comment
* Add some remove-merge/discard tests
* (WIP) Track removed overlays properly
* Clippy; Fmt
* Fix getting last overlay; Fix predecls in overlays
* Remove merging; Fix re-add overwriting stuff
Also some error message tweaks.
* Fix overlay error in the engine
* Update variable_completions.rs
* Adds flags and optional arguments to view-source (#5446)
* added flags and optional arguments to view-source
* removed redundant code
* removed redundant code
* fmt
* fix bug in shell_integration (#5450)
* fix bug in shell_integration
* add some comments
* enable cd to work with directory abbreviations (#5452)
* enable cd to work with abbreviations
* add abbreviation example
* fix tests
* make it configurable
* make cd recornize symblic link (#5454)
* implement seq char command to generate single character sequence (#5453)
* add tmp code
* add seq char command
* Add split number flag in `split row` (#5434)
Signed-off-by: Yuheng Su <gipsyh.icu@gmail.com>
* Add two more overlay tests
* Add ModuleId to OverlayFrame
* Fix env conversion accidentally activating overlay
It activated overlay from permanent state prematurely which would
cause `overlay add` to misbehave.
* Remove unused parameter; Add overlay list test
* Remove added traces
* Add overlay commands examples
* Modify TODO
* Fix $nu.scope iteration
* Disallow removing default overlay
* Refactor some parser errors
* Remove last overlay if no argument
* Diversify overlay examples
* Make it possible to update overlay's module
In case the origin module updates, the overlay add loads the new module,
makes it overlay's origin and applies the changes. Before, it was
impossible to update the overlay if the module changed.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Co-authored-by: pwygab <88221256+merelymyself@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
Co-authored-by: Yuheng Su <gipsyh.icu@gmail.com>
* Pass completion options to each fetch() call
* Add MatchAlgorithm to CompletionOptions
* Add unit test for MatchAlgorithm
* Pass completion options to directory completer
* Initial implementation of ordered call args
* Run cargo fmt
* Fix some clippy lints
* Add positional len and nth
* Cargo fmt
* Remove more old nth calls
* Good ole rustfmt
* Add named len
Co-authored-by: Hristo Filaretov <h.filaretov@protonmail.com>
* Include license text in all crates
Three crates already have license texts, so I'm keeping them, but
symlinking the `LICENSE` from the top level to the rest of the crate
directories. This works as long as `cargo publish` is done on a Unix-y
system and not Windows.
Also bump the copyright year to end in 2022.
Signed-off-by: Michel Alexandre Salim <salimma@fedoraproject.org>
* Replace symlinks
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* Add timestamp flag to `touch` command
* Add modify flag to `touch` command
* Add date flag to `touch` command
* Remove unnecessary `touch` test and fix tests setups
* Change `touch` flags descriptions
* Update `touch` example
* Add reference flag to `touch` command
* Add access flag to `touch` command
* Add no-create flag to `touch` command
* Replace `unwrap` with `expect`
