Update the Shared Config document

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -190,7 +190,7 @@ for p in ${!params[@]}; do
 done
 
 echo '#'                                                                 > shorewallrc
-echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
+echo "# Created by Shorewall Core version $VERSION configure - " `date --utc --date="@${SOURCE_DATE_EPOCH:-$(date +%s)}"` >> shorewallrc
 echo "# rc file: $rcfile"                                               >> shorewallrc
 echo '#'                                                                >> shorewallrc
 
@@ -235,7 +235,8 @@ for on in \
     SPARSE \
     ANNOTATED \
     VARLIB \
-    VARDIR
+    VARDIR \
+    DEFAULT_PAGER
 do
     echo "$on=${options[${on}]}"
     echo "$on=${options[${on}]}" >> shorewallrc

Shorewall-core/configure.pl

@@ -173,7 +173,12 @@ my $outfile;
 
 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
 
-printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+if ( $ENV{SOURCE_DATE_EPOCH} ) {
+    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s\n", VERSION, `date  --utc --date=\"\@$ENV{SOURCE_DATE_EPOCH}\"`;
+} else {
+    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+}
+
 print $outfile "# rc file: $rcfilename\n#\n";
 
 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;
@@ -209,7 +214,8 @@ for ( qw/ HOST
 	  SPARSE
 	  ANNOTATED
 	  VARLIB
-	  VARDIR / ) {
+	  VARDIR
+          DEFAULT_PAGER / ) {
 
     my $val = $options{$_} || '';
 

Shorewall-core/install.sh

@@ -22,64 +22,20 @@
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 
-VERSION=xxx #The Build script inserts the actual version
-
+VERSION=xxx # The Build script inserts the actual version
 PRODUCT=shorewall-core
 Product="Shorewall Core"
- 
+
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <configuration-file> ] "
-    echo "       $ME -v"
-    echo "       $ME -h"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
     exit $1
 }
 
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    echo $dir/$1
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-cant_autostart()
-{
-    echo
-    echo  "WARNING: Unable to configure shorewall to start automatically at boot" >&2
-}
-
-delete_file() # $1 = file to delete
-{
-    rm -f $1
-}
-
 install_file() # $1 = source $2 = target $3 = mode
 {
     if cp -f $1 $2; then
@@ -98,16 +54,16 @@ install_file() # $1 = source $2 = target $3 = mode
     exit 1
 }
 
-require()
-{
-    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
-}
-
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
+#
+# Source common functions
+#
+. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
 #
 # Parse the run line
 #
@@ -126,7 +82,7 @@ while [ $finished -eq 0 ]; do
 			usage 0
 			;;
 		    v)
-			echo "Shorewall Firewall Installer Version $VERSION"
+			echo "$Product Firewall Installer Version $VERSION"
 			exit 0
 			;;
 		    *)
@@ -148,14 +104,14 @@ done
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-	. ./shorewallrc
 	file=./shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f ~/.shorewallrc ]; then
-	. ~/.shorewallrc || exit 1
 	file=~/.shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	. /usr/share/shorewall/shorewallrc
 	file=/usr/share/shorewall/shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -169,7 +125,7 @@ elif [ $# -eq 1 ]; then
 	    ;;
     esac
 
-    . $file
+    . $file || fatal_error "Can not load the RC file: $file"
 else
     usage 1
 fi
@@ -285,13 +241,12 @@ case "$HOST" in
     debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
 	;;
     *)
-	echo "ERROR: Unknown HOST \"$HOST\"" >&2
-	exit 1;
+	fatal_error "Unknown HOST \"$HOST\""
 	;;
 esac
 
 if [ -z "$file" ]; then
-    if $HOST = linux; then
+    if [ $HOST = linux ]; then
 	file=shorewallrc.default
     else
 	file=shorewallrc.${HOST}
@@ -304,7 +259,8 @@ if [ -z "$file" ]; then
     echo "" >&2
     echo "Example:" >&2
     echo "" >&2
-    echo "   ./install.sh $file" &>2
+    echo "   ./install.sh $file" >&2
+    exit 1
 fi
 
 if [ -n "$DESTDIR" ]; then
@@ -315,45 +271,31 @@ if [ -n "$DESTDIR" ]; then
     fi
 fi
 
-echo "Installing Shorewall Core Version $VERSION"
+echo "Installing $Product Version $VERSION"
 
 #
 # Create directories
 #
-mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall
-chmod 755 ${DESTDIR}${LIBEXECDIR}/shorewall
+make_parent_directory ${DESTDIR}${LIBEXECDIR}/shorewall 0755
 
-mkdir -p ${DESTDIR}${SHAREDIR}/shorewall
-chmod 755 ${DESTDIR}${SHAREDIR}/shorewall
+make_parent_directory ${DESTDIR}${SHAREDIR}/shorewall 0755
 
-mkdir -p ${DESTDIR}${CONFDIR}
-chmod 755 ${DESTDIR}${CONFDIR}
+make_parent_directory ${DESTDIR}${CONFDIR} 0755
 
-if [ -n "${SYSCONFDIR}" ]; then
-    mkdir -p ${DESTDIR}${SYSCONFDIR}
-    chmod 755 ${DESTDIR}${SYSCONFDIR}
-fi
+[ -n "${SYSCONFDIR}" ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
 
 if [ -z "${SERVICEDIR}" ]; then
     SERVICEDIR="$SYSTEMD"
 fi
 
-if [ -n "${SERVICEDIR}" ]; then
-    mkdir -p ${DESTDIR}${SERVICEDIR}
-    chmod 755 ${DESTDIR}${SERVICEDIR}
-fi
+[ -n "${SERVICEDIR}" ] && make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
 
-mkdir -p ${DESTDIR}${SBINDIR}
-chmod 755 ${DESTDIR}${SBINDIR}
+make_parent_directory ${DESTDIR}${SBINDIR} 0755
 
-if [ -n "${MANDIR}" ]; then
-    mkdir -p ${DESTDIR}${MANDIR}
-    chmod 755 ${DESTDIR}${MANDIR}
-fi
+[ -n "${MANDIR}" ] && make_parent_directory ${DESTDIR}${MANDIR} 0755
 
 if [ -n "${INITFILE}" ]; then
-    mkdir -p ${DESTDIR}${INITDIR}
-    chmod 755 ${DESTDIR}${INITDIR}
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
 
     if [ -n "$AUXINITSOURCE" -a -f "$AUXINITSOURCE" ]; then
 	install_file $AUXINITSOURCE ${DESTDIR}${INITDIR}/$AUXINITFILE 0544
@@ -365,6 +307,12 @@ fi
 # Note: ${VARDIR} is created at run-time since it has always been
 #       a relocatable directory on a per-product basis
 #
+# Install the CLI
+#
+install_file shorewall ${DESTDIR}${SBINDIR}/shorewall 0755
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall
+echo "Shorewall CLI program installed in ${DESTDIR}${SBINDIR}/shorewall"
+#
 # Install wait4ifup
 #
 install_file wait4ifup ${DESTDIR}${LIBEXECDIR}/shorewall/wait4ifup 0755
@@ -376,10 +324,41 @@ echo "wait4ifup installed in ${DESTDIR}${LIBEXECDIR}/shorewall/wait4ifup"
 # Install the libraries
 #
 for f in lib.* ; do
-    install_file $f ${DESTDIR}${SHAREDIR}/shorewall/$f 0644
-    echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
+    case $f in
+        *installer)
+            ;;
+        *)
+            install_file $f ${DESTDIR}${SHAREDIR}/shorewall/$f 0644
+            echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
+            ;;
+    esac
 done
 
+if [ $SHAREDIR != /usr/share ]; then
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.core
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.cli
+fi
+
+#
+# Install the Man Pages
+#
+if [ -n "$MANDIR" ]; then
+    cd manpages
+
+    [ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
+
+    for f in *.8; do
+	gzip -9c $f > $f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
+    done
+
+    cd ..
+
+    echo "Man Pages Installed"
+fi
+
 #
 # Symbolically link 'functions' to lib.base
 #
@@ -388,7 +367,7 @@ ln -sf lib.base ${DESTDIR}${SHAREDIR}/shorewall/functions
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}${SHAREDIR}/shorewall/coreversion
-chmod 644 ${DESTDIR}${SHAREDIR}/shorewall/coreversion
+chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall/coreversion
 
 if [ -z "${DESTDIR}" ]; then
     if [ $update -ne 0 ]; then
@@ -413,14 +392,20 @@ fi
 
 if [ ${SHAREDIR} != /usr/share ]; then
     for f in lib.*; do
-	if [ $BUILD != apple ]; then
-	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
-	else
-	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
-	fi
+        case $f in
+            *installer)
+                ;;
+            *)
+                if [ $BUILD != apple ]; then
+                    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+                else
+                    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+                fi
+                ;;
+        esac
     done
 fi
 #
-#  Report Success
+# Report Success
 #
-echo "Shorewall Core Version $VERSION Installed"
+echo "$Product Version $VERSION Installed"

Shorewall-core/lib.base

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.base
+# Shorewall 5.1 -- /usr/share/shorewall/lib.base
 #
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -20,412 +20,22 @@
 #	You should have received a copy of the GNU General Public License
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
-# This library contains the code common to all Shorewall components except the
-# generated scripts.
+# This library is a compatibility wrapper around lib.core.
 #
 
-SHOREWALL_LIBVERSION=40509
-
-[ -n "${g_program:=shorewall}" ]
-
-if [ -z "$g_readrc" ]; then
+if [ -z "$PRODUCT" ]; then
     #
     # This is modified by the installer when ${SHAREDIR} != /usr/share
     #
     . /usr/share/shorewall/shorewallrc
 
-    g_sharedir="$SHAREDIR"/$g_program
-    g_confdir="$CONFDIR"/$g_program
-    g_readrc=1
+    g_basedir=${SHAREDIR}/shorewall
+
+    if [ -z "$SHOREWALL_LIBVERSION" ]; then
+	. ${g_basedir}/lib.core
+    fi
+
+    set_default_product
+
+    setup_product_environment
 fi
-
-g_basedir=${SHAREDIR}/shorewall
-
-case $g_program in
-    shorewall)
-	g_product="Shorewall"
-	g_family=4
-	g_tool=iptables
-	g_lite=
-	;;
-    shorewall6)
-	g_product="Shorewall6"
-	g_family=6
-	g_tool=ip6tables
-	g_lite=
-	;;
-    shorewall-lite)
-	g_product="Shorewall Lite"
-	g_family=4
-	g_tool=iptables
-	g_lite=Yes
-	;;
-    shorewall6-lite)
-	g_product="Shorewall6 Lite"
-	g_family=6
-	g_tool=ip6tables
-	g_lite=Yes
-	;;
-esac
-
-if [ -z "${VARLIB}" ]; then
-    VARLIB=${VARDIR}
-    VARDIR=${VARLIB}/$g_program
-elif [ -z "${VARDIR}" ]; then
-    VARDIR="${VARLIB}/${PRODUCT}"
-fi
-
-#
-# Fatal Error
-#
-fatal_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 2
-}
-
-#
-# Not configured Error
-#
-not_configured_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 6
-}
-
-#
-# Conditionally produce message
-#
-progress_message() # $* = Message
-{
-    local timestamp
-    timestamp=
-
-    if [ $VERBOSITY -gt 1 ]; then
-	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
-	echo "${timestamp}$@"
-    fi
-}
-
-progress_message2() # $* = Message
-{
-    local timestamp
-    timestamp=
-
-    if [ $VERBOSITY -gt 0 ]; then
-	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
-	echo "${timestamp}$@"
-    fi
-}
-
-progress_message3() # $* = Message
-{
-    local timestamp
-    timestamp=
-
-    if [ $VERBOSITY -ge 0 ]; then
-	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
-	echo "${timestamp}$@"
-    fi
-}
-
-#
-# Undo the effect of 'separate_list()'
-#
-combine_list()
-{
-    local f
-    local o
-    o=
-
-    for f in $* ; do
-        o="${o:+$o,}$f"
-    done
-
-    echo $o
-}
-
-#
-# Validate an IP address
-#
-valid_address() {
-    local x
-    local y
-    local ifs
-    ifs=$IFS
-
-    IFS=.
-
-    for x in $1; do
-	case $x in
-	    [0-9]|[0-9][0-9]|[1-2][0-9][0-9])
-		[ $x -lt 256 ] || { IFS=$ifs; return 2; }
-                ;;
-	    *)
-	        IFS=$ifs
-		return 2
-		;;
-	esac
-    done
-
-    IFS=$ifs
-
-    return 0
-}
-
-#
-# Miserable Hack to work around broken BusyBox ash in OpenWRT
-#
-addr_comp() {
-    test $(bc <<EOF
-$1 > $2
-EOF
-) -eq 1
-
-}
-
-#
-# Enumerate the members of an IP range -- When using a shell supporting only
-# 32-bit signed arithmetic, the range cannot span 128.0.0.0.
-#
-# Comes in two flavors:
-#
-# ip_range() - produces a mimimal list of network/host addresses that spans
-#              the range.
-#
-# ip_range_explicit() - explicitly enumerates the range.
-#
-ip_range() {
-    local first
-    local last
-    local l
-    local x
-    local y
-    local z
-    local vlsm
-
-    case $1 in
-	!*)
-	    #
-	    # Let iptables complain if it's a range
-	    #
-	    echo $1
-	    return
-	    ;;
-	[0-9]*.*.*.*-*.*.*.*)
-            ;;
-	*)
-	    echo $1
-	    return
-	    ;;
-    esac
-
-    first=$(decodeaddr ${1%-*})
-    last=$(decodeaddr ${1#*-})
-
-    if addr_comp $first $last; then
-	fatal_error "Invalid IP address range: $1"
-    fi
-
-    l=$(( $last + 1 ))
-
-    while addr_comp $l $first; do
-	vlsm=
-	x=31
-	y=2
-	z=1
-
-	while [ $(( $first % $y )) -eq 0 ] && ! addr_comp $(( $first + $y )) $l; do
-	    vlsm=/$x
-	    x=$(( $x - 1 ))
-	    z=$y
-	    y=$(( $y * 2 ))
-	done
-
-	echo $(encodeaddr $first)$vlsm
-	first=$(($first + $z))
-    done
-}
-
-ip_range_explicit() {
-    local first
-    local last
-
-    case $1 in
-    [0-9]*.*.*.*-*.*.*.*)
-	;;
-    *)
-	echo $1
-	return
-	;;
-    esac
-
-    first=$(decodeaddr ${1%-*})
-    last=$(decodeaddr ${1#*-})
-
-    if addr_comp $first $last; then
-	fatal_error "Invalid IP address range: $1"
-    fi
-
-    while ! addr_comp $first $last; do
-	echo $(encodeaddr $first)
-	first=$(($first + 1))
-    done
-}
-
-[ -z "$LEFTSHIFT" ] && . ${g_basedir}/lib.common
-
-#
-# Netmask to VLSM
-#
-ip_vlsm() {
-    local mask
-    mask=$(decodeaddr $1)
-    local vlsm
-    vlsm=0
-    local x
-    x=$(( 128 << 24 )) # 0x80000000
-
-    while [ $(( $x & $mask )) -ne 0 ]; do
-	[ $mask -eq $x ] && mask=0 || mask=$(( $mask $LEFTSHIFT 1 )) # Not all shells shift 0x80000000 left properly.
-	vlsm=$(($vlsm + 1))
-    done
-
-    if [ $(( $mask & 2147483647 )) -ne 0 ]; then # 2147483647 = 0x7fffffff
-	echo "Invalid net mask: $1" >&2
-    else
-	echo $vlsm
-    fi
-}
-
-#
-# Set default config path
-#
-ensure_config_path() {
-    local F
-    F=${g_sharedir}/configpath
-    if [ -z "$CONFIG_PATH" ]; then
-	[ -f $F ] || { echo "   ERROR: $F does not exist"; exit 2; }
-	. $F
-    fi
-
-    if [ -n "$g_shorewalldir" ]; then
-	[ "${CONFIG_PATH%%:*}" = "$g_shorewalldir" ] || CONFIG_PATH=$g_shorewalldir:$CONFIG_PATH
-    fi
-}
-
-#
-# Get fully-qualified name of file
-#
-resolve_file() # $1 = file name
-{
-    local pwd
-    pwd=$PWD
-
-    case $1 in
-	/*)
-	    echo $1
-	    ;;
-	.)
-	    echo $pwd
-	    ;;
-	./*)
-	    echo ${pwd}${1#.}
-	    ;;
-	..)
-	    cd ..
-	    echo $PWD
-	    cd $pwd
-	    ;;
-	../*)
-	    cd ..
-	    resolve_file ${1#../}
-	    cd $pwd
-	    ;;
-	*)
-	    echo $pwd/$1
-	    ;;
-    esac
-}
-
-#
-# Determine how to do "echo -e"
-#
-
-find_echo() {
-    local result
-
-    result=$(echo "a\tb")
-    [ ${#result} -eq 3 ] && { echo echo; return; }
-
-    result=$(echo -e "a\tb")
-    [ ${#result} -eq 3 ] && { echo "echo -e"; return; }
-
-    result=$(which echo)
-    [ -n "$result" ] && { echo "$result -e"; return; }
-
-    echo echo
-}
-
-# Determine which version of mktemp is present (if any) and set MKTEMP accortingly:
-#
-#     None - No mktemp
-#     BSD  - BSD mktemp (Mandrake)
-#     STD  - mktemp.org mktemp
-#
-find_mktemp() {
-    local mktemp
-    mktemp=`mywhich mktemp 2> /dev/null`
-
-    if [ -n "$mktemp" ]; then
-	if qt mktemp -V ; then
-	    MKTEMP=STD
-	else
-	    MKTEMP=BSD
-	fi
-    else
-	MKTEMP=None
-    fi
-}
-
-#
-# create a temporary file. If a directory name is passed, the file will be created in
-# that directory. Otherwise, it will be created in a temporary directory.
-#
-mktempfile() {
-
-    [ -z "$MKTEMP" ] && find_mktemp
-
-    if [ $# -gt 0 ]; then
-	case "$MKTEMP" in
-	    BSD)
-		mktemp $1/shorewall.XXXXXX
-		;;
-	    STD)
-		mktemp -p $1 shorewall.XXXXXX
-		;;
-	    None)
-		> $1/shorewall-$$ && echo $1/shorewall-$$
-		;;
-	    *)
-		error_message "ERROR:Internal error in mktempfile"
-		;;
-	esac
-    else
-	case "$MKTEMP" in
-	    BSD)
-		mktemp ${TMPDIR:-/tmp}/shorewall.XXXXXX
-		;;
-	    STD)
-		mktemp -t shorewall.XXXXXX
-		;;
-	    None)
-		rm -f ${TMPDIR:-/tmp}/shorewall-$$
-		> ${TMPDIR:-}/shorewall-$$ && echo ${TMPDIR:-/tmp}/shorewall-$$
-		;;
-	    *)
-		error_message "ERROR:Internal error in mktempfile"
-		;;
-	esac
-    fi
-}

Shorewall-core/lib.cli

@@ -25,22 +25,18 @@
 # loaded after this one and replaces some of the functions declared here.
 #
 
-SHOREWALL_CAPVERSION=50004
+SHOREWALL_CAPVERSION=50106
 
-[ -n "${g_program:=shorewall}" ]
-
-if [ -z "$g_readrc" ]; then
+if [ -z "$g_basedir" ]; then
     #
     # This is modified by the installer when ${SHAREDIR} <> /usr/share
     #
     . /usr/share/shorewall/shorewallrc
 
-    g_sharedir="$SHAREDIR"/$g_program
-    g_confdir="$CONFDIR"/$g_program
-    g_readrc=1
+    g_basedir=${SHAREDIR}/shorewall
 fi
 
-. ${SHAREDIR}/shorewall/lib.base
+. ${g_basedir}/lib.core
 
 #
 # Issue an error message and die
@@ -82,29 +78,6 @@ showchain() # $1 = name of chain
     fi
 }
 
-#
-# The 'awk' hack that compensates for bugs in iptables-save (or rather in the extension modules).
-#
-
-iptablesbug()
-{
-    if [ $g_family -eq 4 ]; then
-	if qt mywhich awk ; then
-	    awk 'BEGIN           { sline=""; };\
-             /^-[jg]/            { print sline $0; next };\
-             /-m policy.*-[jg] / { print $0; next };\
-             /-m policy/         { sline=$0; next };\
-             /--mask ff/         { sub( /--mask ff/, "--mask 0xff" ) };\
-                                 { print ; sline="" }'
-        else
-	    echo "   WARNING: You don't have 'awk' on this system so the output of the save command may be unusable" >&2
-	    cat
-	fi
-    else
-	cat
-    fi
-}
-
 #
 # Validate the value of RESTOREFILE
 #
@@ -395,13 +368,13 @@ logwatch() # $1 = timeout -- if negative, prompt each time that
 	if [ "$rejects" != "$oldrejects" ]; then
 	    oldrejects="$rejects"
 
-	    $g_ring_bell
+	    printf '\a'
 
 	    packet_log 40
 
 	    if [ "$pause" = "Yes" ]; then
 		echo
-		echo $g_echo_n 'Enter any character to continue: '
+		printf 'Enter any character to continue: '
 		read foo
 	    else
 		timed_read
@@ -466,7 +439,8 @@ do_save() {
 	if $iptables_save | grep -v -- '-A dynamic.* -j ACCEPT' > ${VARDIR}/restore-$$; then
 	    cp -f ${VARDIR}/firewall $g_restorepath
 	    mv -f ${VARDIR}/restore-$$ ${g_restorepath}-iptables
-	    chmod +x $g_restorepath
+	    chmod 700 $g_restorepath
+	    chmod 600 ${g_restorepath}-iptables
 	    echo "   Currently-running Configuration Saved to $g_restorepath"
 	    run_user_exit save
 	else
@@ -487,6 +461,7 @@ do_save() {
 		if ${arptables}-save > ${VARDIR}/restore-$$; then
 		    if grep -q '^-A' ${VARDIR}/restore-$$; then
 			mv -f ${VARDIR}/restore-$$ ${g_restorepath}-arptables
+			chmod 600 ${g_restorepath}-arptables
 		    else
 			rm -f ${VARDIR}/restore-$$
 		    fi
@@ -533,7 +508,7 @@ do_save() {
 			#
 			# Don't save an 'empty' file
 			#
-			grep -qE -- '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${g_restorepath}-ipsets
+			grep -qE -- '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${g_restorepath}-ipsets && chmod 600 ${g_restorepath}-ipsets
 		    fi
 		fi
 		;;
@@ -947,7 +922,7 @@ show_events() {
 	for file in /proc/net/xt_recent/*; do
 	    base=$(basename $file)
 
-	    if [ $base != %CURRENTTIME ]; then
+	    if [ "$base" != %CURRENTTIME -a "$base" != "*" ]; then
 		echo $base
 		show_event $base
 		echo
@@ -1009,13 +984,6 @@ show_raw() {
     $g_tool -t raw -L $g_ipt_options | $output_filter
 }
 
-show_rawpost() {
-    echo "$g_product $SHOREWALL_VERSION RAWPOST Table at $g_hostname - $(date)"
-    echo
-    show_reset
-    $g_tool -t rawpost -L $g_ipt_options | $output_filter
-}
-
 show_mangle() {
     echo "$g_product $SHOREWALL_VERSION Mangle Table at $g_hostname - $(date)"
     echo
@@ -1159,6 +1127,64 @@ show_macros() {
     done
 }
 
+show_an_action() {
+    echo "Shorewall $SHOREWALL_VERSION Action $1 at $g_hostname - $(date)"
+    cat ${directory}/action.$1
+}
+
+show_a_macro() {
+    echo "Shorewall $SHOREWALL_VERSION Macro $1 at $g_hostname - $(date)"
+    cat ${directory}/macro.$1
+}
+#
+# Don't dump empty SPD entries or entries from the other address family
+#
+spd_filter() {
+    #
+    # af   = Address Family (4 or 6)
+    # afok = Address Family of entry matches af
+    # p    = print the contents of A (entry is not empty)
+    # i    = Number of lines stored in A
+    #
+    awk -v af=$g_family \
+	'function prnt(A,i,    j) { while ( j < i ) print A[j++]; };\
+\
+	 /^src / { if (p) prnt( A, i );\
+		   afok = 1;\
+		   p	= 0;\
+		   i	= 0;\
+		   if ( af == 4 )\
+		       { if ( /:/ )  afok = 0; }\
+		   else\
+		       { if ( /\./ ) afok = 0; }\
+		 };\
+		 { if ( afok ) A[i++] = $0; };\
+	 /tmpl/	 { p = afok; };\
+\
+	 END	 { if (p) prnt( A, i ); }'
+}
+#
+# Print a heading with leading and trailing black lines
+#
+heading() {
+    echo
+    echo "$@"
+    echo
+}
+
+show_ipsec() {
+    heading "PFKEY SPD"
+    $IP -s -$g_family xfrm policy | spd_filter
+
+    heading "PFKEY SAD"
+    $IP -s -$g_family xfrm state | egrep -v '[[:space:]]+(auth-trunc|enc )' # Don't divulge the keys
+}
+
+show_ipsec_command() {
+    echo "$g_product $SHOREWALL_VERSION IPSEC at $g_hostname - $(date)"
+    show_ipsec
+}
+
 #
 # Show Command Executor
 #
@@ -1179,10 +1205,10 @@ show_command() {
 	if [ -n "$foo" ]; then
 	    macro=${macro#*.}
 	    foo=${foo%.*}
-	    if [ ${#macro} -gt 10 ]; then
-		echo "   $macro  ${foo#\#}"
+	    if [ ${#macro} -gt 5 ]; then
+		printf "  $macro\t${foo#\#}\n"
 	    else
-		$g_echo_e "   $macro  \t${foo#\#}"
+		printf "  $macro\t\t${foo#\#}\n"
 	    fi
 	fi
     }
@@ -1229,7 +1255,7 @@ show_command() {
 			    [ $# -eq 1 ] && missing_option_value -t
 
 			    case $2 in
-				mangle|nat|filter|raw|rawpost)
+				mangle|nat|filter|raw)
 				    table=$2
 				    table_given=Yes
 				    ;;
@@ -1283,10 +1309,6 @@ show_command() {
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_raw $g_pager
 	    ;;
-	rawpost)
-	    [ $# -gt 1 ] && too_many_arguments $2
-	    eval show_rawpost $g_pager
-	    ;;
 	tos|mangle)
 	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_mangle $g_pager
@@ -1354,14 +1376,14 @@ show_command() {
 		echo "LIBEXEC=${LIBEXECDIR}"
 		echo "SBINDIR=${SBINDIR}"
 		echo "CONFDIR=${CONFDIR}"
-		[ -n "$g_lite" ] && [ ${VARDIR} != /var/lib/$g_program ] && echo "LITEDIR=${VARDIR}"
+		[ -n "$g_lite" ] && [ ${VARDIR} != /var/lib/$PRODUCT ] && echo "LITEDIR=${VARDIR}"
 	    else
 		echo "Default CONFIG_PATH is $CONFIG_PATH"
-		echo "Default VARDIR is /var/lib/$g_program"
+		echo "Default VARDIR is /var/lib/$PRODUCT"
 		echo "LIBEXEC is ${LIBEXECDIR}"
 		echo "SBINDIR is ${SBINDIR}"
 		echo "CONFDIR is ${CONFDIR}"
-		[ -n "$g_lite" ] && [ ${VARDIR} != /var/lib/$g_program ] && echo "LITEDIR is ${VARDIR}"
+		[ -n "$g_lite" ] && [ ${VARDIR} != /var/lib/$PRODUCT ] && echo "LITEDIR is ${VARDIR}"
 	    fi
 	    ;;
 	chain)
@@ -1424,23 +1446,41 @@ show_command() {
 		$g_tool -t filter -L dynamic $g_ipt_options  | fgrep ACCEPT | $output_filter
 	    fi
 	    ;;
+	ipsec)
+	    [ $# -gt 1 ] && too_many_arguments $2
+	    eval show_ipsec_command $g_pager
+	    ;;
 	*)
-	    case "$g_program" in
+	    case "$PRODUCT" in
 		*-lite)
 		    ;;
 	    	*)
 		    case $1 in
+			action)
+			    [ $# -lt 2 ] && fatal_error 'Missing <action>'
+			    [ $# -gt 2 ] && too_many_arguments $2
+
+			    for directory in $(split $CONFIG_PATH); do
+				if [ -f ${directory}/action.$2 ]; then
+				    eval show_an_action $2 $g_pager
+				    return
+				fi
+			    done
+
+			    echo "   WARNING: Action $2 not found" >&2
+			    return
+			    ;;
 			actions)
 			    [ $# -gt 1 ] && too_many_arguments $2
 			    eval show_actions_sorted $g_pager
 			    return
 			    ;;
 			macro)
+			    [ $# -lt 2 ] && fatal_error 'Missing <macro>'
 			    [ $# -ne 2 ] && too_many_arguments $2
 			    for directory in $(split $CONFIG_PATH); do
 				if [ -f ${directory}/macro.$2 ]; then
-				    echo "Shorewall $SHOREWALL_VERSION Macro $2 at $g_hostname - $(date)"
-				    cat ${directory}/macro.$2
+				    eval show_a_macro $2 $g_pager
 				    return
 				fi
 			    done
@@ -1672,11 +1712,6 @@ do_dump_command() {
 	$g_tool -t raw -L $g_ipt_options
     fi
 
-    if qt $g_tool -t rawpost -L -n; then
-	heading "Rawpost Table"
-	$g_tool -t rawpost -L $g_ipt_options
-    fi
-
     local count
     local max
 
@@ -1727,12 +1762,7 @@ do_dump_command() {
     heading "Events"
     show_events
 
-    if qt mywhich setkey; then
-	heading "PFKEY SPD"
-	setkey -DP
-	heading "PFKEY SAD"
-	setkey -D | grep -Ev '^[[:space:]](A:|E:)'  # Don't divulge the keys
-    fi
+    show_ipsec
 
     heading "/proc"
     show_proc /proc/version
@@ -1803,6 +1833,7 @@ dump_command() {
 restore_command() {
     local finished
     finished=0
+    local result
 
     while [ $finished -eq 0 -a $# -gt 0 ]; do
 	option=$1
@@ -1867,8 +1898,11 @@ restore_command() {
 	progress_message3 "Restoring $g_product..."
 
 	run_it $g_restorepath restore && progress_message3 "$g_product restored from ${VARDIR}/$RESTOREFILE"
+	result=$?
 
 	[ -n "$g_nolock" ] || mutex_off
+
+	exit $result
     else
 	echo "File $g_restorepath: file not found"
 	[ -n "$g_nolock" ] || mutex_off
@@ -1928,15 +1962,6 @@ read_yesno_with_timeout() {
     fi
 }
 
-#
-# Print a heading with leading and trailing black lines
-#
-heading() {
-    echo
-    echo "$@"
-    echo
-}
-
 #
 # Create the appropriate -q option to pass onward
 #
@@ -2737,7 +2762,6 @@ determine_capabilities() {
     CONNMARK_MATCH=
     XCONNMARK_MATCH=
     RAW_TABLE=
-    RAWPOST_TABLE=
     IPP2P_MATCH=
     OLD_IPP2P_MATCH=
     LENGTH_MATCH=
@@ -2762,7 +2786,7 @@ determine_capabilities() {
     GOTO_TARGET=
     LOGMARK_TARGET=
     IPMARK_TARGET=
-    LOG_TARGET=Yes
+    LOG_TARGET=
     ULOG_TARGET=
     NFLOG_TARGET=
     PERSISTENT_SNAT=
@@ -2793,6 +2817,10 @@ determine_capabilities() {
     IFACE_MATCH=
     TCPMSS_TARGET=
     WAIT_OPTION=
+    CPU_FANOUT=
+    NETMAP_TARGET=
+    NFLOG_SIZE=
+    RESTORE_WAIT_OPTION=
 
     AMANDA_HELPER=
     FTP_HELPER=
@@ -2816,9 +2844,11 @@ determine_capabilities() {
 	qt $arptables -L OUT && ARPTABLESJF=Yes
     fi
 
+    [ -z "$(${g_tool}-restore --wait < /dev/null 2>&1)" ] && RESTORE_WAIT_OPTION=Yes
+
     if qt $g_tool --wait -t filter -L INPUT -n -v; then
 	WAIT_OPTION=Yes
-	tool="$tool --wait"
+	g_tool="$g_tool --wait"
     fi
 
     chain=fooX$$
@@ -2827,8 +2857,10 @@ determine_capabilities() {
 	if qt $g_tool -t nat -N $chain; then
 	    if [ $g_family -eq 4 ]; then
 		qt $g_tool -t nat -A $chain -j SNAT --to-source 1.2.3.4 --persistent && PERSISTENT_SNAT=Yes
+		qt $g_tool -t nat -A $chain -j NETMAP --to 1.2.3.0/24 && NETMAP_TARGET=Yes
 	    else
 		qt $g_tool -t nat -A $chain -j SNAT --to-source 2001::1 --persistent && PERSISTENT_SNAT=Yes
+		qt $g_tool -t nat -A $chain -j NETMAP --to 2001:470:B:227::/64 && NETMAP_TARGET=Yes
 	    fi
 	    qt $g_tool -t nat -A $chain -j MASQUERADE && MASQUERADE_TGT=Yes
 	    qt $g_tool -t nat -A $chain -p udplite -m multiport --dport 33 -j REDIRECT --to-port 22 && UDPREDIRECT=Yes
@@ -2988,7 +3020,6 @@ determine_capabilities() {
     fi
 
     qt $g_tool -t raw	  -L -n && RAW_TABLE=Yes
-    qt $g_tool -t rawpost -L -n && RAWPOST_TABLE=Yes
 
     if [ -n "$RAW_TABLE" ]; then
 	qt $g_tool -t raw -F $chain
@@ -3090,7 +3121,12 @@ determine_capabilities() {
 	qt $g_tool -A $chain -m hashlimit --hashlimit 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && OLD_HL_MATCH=Yes
 	HASHLIMIT_MATCH=$OLD_HL_MATCH
     fi
-    qt $g_tool -A $chain -j NFQUEUE --queue-num 4 && NFQUEUE_TARGET=Yes
+
+    if qt $g_tool -A $chain -j NFQUEUE --queue-num 4; then
+	NFQUEUE_TARGET=Yes
+	qt $g_tool -A $chain -j NFQUEUE --queue-balance 0:3 --queue-cpu-fanout && CPU_FANOUT=Yes
+    fi
+
     qt $g_tool -A $chain -m realm --realm 4 && REALM_MATCH=Yes
 
     #
@@ -3118,12 +3154,15 @@ determine_capabilities() {
     qt $g_tool -A $chain -m time --timestart 23:00 -j DROP && TIME_MATCH=Yes
     qt $g_tool -A $chain -g $chain1 && GOTO_TARGET=Yes
     qt $g_tool -A $chain -j LOGMARK && LOGMARK_TARGET=Yes
-    qt $g_tool -A $chain -j LOG || LOG_TARGET=
+    qt $g_tool -A $chain -j LOG && LOG_TARGET=Yes
     qt $g_tool -A $chain -j ULOG && ULOG_TARGET=Yes
-    qt $g_tool -A $chain -j NFLOG && NFLOG_TARGET=Yes
     qt $g_tool -A $chain -j MARK --set-mark 5 && MARK_ANYWHERE=Yes
     qt $g_tool -A $chain -m statistic --mode nth --every 2 --packet 1 && STATISTIC_MATCH=Yes
     qt $g_tool -A $chain -m geoip --src-cc US && GEOIP_MATCH=Yes
+    if qt $g_tool -A $chain -j NFLOG; then
+	NFLOG_TARGET=Yes
+	qt $g_tool -A $chain -j NFLOG --nflog-size 64 && NFLOG_SIZE=Yes
+    fi
 
     if [ $g_family -eq 4 ]; then
 	qt $g_tool -A $chain -j ACCOUNT --addr 192.168.1.0/29 --tname $chain && ACCOUNT_TARGET=Yes
@@ -3209,7 +3248,6 @@ report_capabilities_unsorted() {
     report_capability "Connmark Match (CONNMARK_MATCH)" $CONNMARK_MATCH
     [ -n "$CONNMARK_MATCH" ] && report_capability "Extended Connmark Match (XCONNMARK_MATCH)" $XCONNMARK_MATCH
     report_capability "Raw Table (RAW_TABLE)" $RAW_TABLE
-    report_capability "Rawpost Table (RAWPOST_TABLE)" $RAWPOST_TABLE
     report_capability "IPP2P Match (IPP2P_MATCH)" $IPP2P_MATCH
     [ -n "$OLD_IPP2P_MATCH" ] && report_capability "Old IPP2P Match Syntax (OLD_IPP2P_MATCH)" $OLD_IPP2P_MATCH
     report_capability "CLASSIFY Target (CLASSIFY_TARGET)" $CLASSIFY_TARGET
@@ -3280,14 +3318,19 @@ report_capabilities_unsorted() {
     if [ $g_family -eq 4 ]; then
 	report_capability "iptables -S (IPTABLES_S)" $IPTABLES_S
 	report_capability "iptables --wait option (WAIT_OPTION)" $WAIT_OPTION
+	report_capability "iptables-restore --wait option (RESTORE_WAIT_OPTION)" $RESTORE_WAIT_OPTION
     else
 	report_capability "ip6tables -S (IPTABLES_S)" $IPTABLES_S
 	report_capability "ip6tables --wait option (WAIT_OPTION)" $WAIT_OPTION
+	report_capability "ip6tables-restore --wait option (RESTORE_WAIT_OPTION)" $RESTORE_WAIT_OPTION
     fi
 
     report_capability "Basic Filter (BASIC_FILTER)" $BASIC_FILTER
     report_capability "Basic Ematch (BASIC_EMATCH)" $BASIC_EMATCH
     report_capability "CT Target (CT_TARGET)" $CT_TARGET
+    report_capability "NFQUEUE CPU Fanout (CPU_FANOUT)" $CPU_FANOUT
+    report_capability "NETMAP Target (NETMAP_TARGET)" $NETMAP_TARGET
+    report_capability "--nflog-size support (NFLOG_SIZE)" $NFLOG_SIZE
 
     echo "   Kernel Version (KERNELVERSION): $KERNELVERSION"
     echo "   Capabilities Version (CAPVERSION): $CAPVERSION"
@@ -3337,7 +3380,6 @@ report_capabilities_unsorted1() {
     report_capability1 CONNMARK_MATCH
     report_capability1 XCONNMARK_MATCH
     report_capability1 RAW_TABLE
-    report_capability1 RAWPOST_TABLE
     report_capability1 IPP2P_MATCH
     report_capability1 OLD_IPP2P_MATCH
     report_capability1 CLASSIFY_TARGET
@@ -3393,6 +3435,10 @@ report_capabilities_unsorted1() {
     report_capability1 IFACE_MATCH
     report_capability1 TCPMSS_TARGET
     report_capability1 WAIT_OPTION
+    report_capability1 CPU_FANOUT
+    report_capability1 NETMAP_TARGET
+    report_capability1 NFLOG_SIZE
+    report_capability1 RESTORE_WAIT_OPTION
 
     report_capability1 AMANDA_HELPER
     report_capability1 FTP_HELPER
@@ -3553,10 +3599,40 @@ blacklist_command() {
 	    ;;
     esac
 
-    $IPSET -A $g_blacklistipset $@ && progress_message2 "$1 Blacklisted" || { error_message "ERROR: Address $1 not blacklisted"; return 1; }
+    if $IPSET -A $g_blacklistipset $@ -exist; then
+	local message
+
+	progress_message2 "$1 Blacklisted"
+
+	if [ -n "$g_disconnect" ]; then
+	    message="$(conntrack -D -s $1 2>&1)"
+	    if [ -n "$message" -a $VERBOSITY -gt 0 ]; then
+		if [ $VERBOSITY -gt 1 ]; then
+		    echo "$message" | awk '/have been deleted/ { sub( /^.*: /, "" ); sub( / /,  " src " ); }; { print; }'
+		else
+		    echo "$message" | head -n1 | sed 's/^.*: //; s/ / src /'
+		fi
+	    fi
+
+	    if [ $g_disconnect = src-dst ]; then
+		message="$(conntrack -D -d $1 2>&1)"
+		if [ -n "$message" -a $VERBOSITY -gt 0 ]; then
+		    if [ $VERBOSITY -gt 1 ]; then
+			echo "$message" | awk '/have been deleted/ { sub( /^.*: /, "" ); sub( / /,  " dst " ); }; { print; }'
+		    else
+			echo "$message" | head -n1 | sed 's/^.*: //; s/ / dst /'
+		    fi
+		fi
+	    fi
+	fi
+    else
+	error_message "ERROR: Address $1 not blacklisted"
+	return 1
+    fi
 
     return 0
 }
+
 save_command() {
     local finished
     finished=0
@@ -3667,7 +3743,7 @@ ipcalc_command() {
 
     valid_address $address || fatal_error "Invalid IP address: $address"
     [ -z "$vlsm" ] && fatal_error "Missing VLSM"
-    [ "x$address" = "x$vlsm" ] && "Invalid VLSM"
+    [ "x$address" = "x$vlsm" ] && fatal_error "Invalid VLSM"
     [ $vlsm -gt 32 ] && fatal_error "Invalid VLSM: /$vlsm"
 
     address=$address/$vlsm
@@ -3759,6 +3835,68 @@ verify_firewall_script() {
     fi
 }
 
+setup_dbl() {
+    local original
+
+    original=$DYNAMIC_BLACKLIST
+
+    case $DYNAMIC_BLACKLIST in
+	*:*,)
+	    fatal_error "Invalid value ($original) for DYNAMIC_BLACKLIST"
+	    ;;
+	ipset*,disconnect*)
+	    if qt mywhich conntrack; then
+		g_disconnect=src
+		DYNAMIC_BLACKLIST=$(echo $DYNAMIC_BLACKLIST | sed 's/,disconnect//')
+	    else
+		fatal_error "The 'disconnect' option requires that the conntrack utility be installed"
+	    fi
+	    ;;
+    esac
+
+    case $DYNAMIC_BLACKLIST in
+	ipset*,src-dst*)
+	    #
+	    # This utility doesn't need to know about 'src-dst'
+	    #
+	    DYNAMIC_BLACKLIST=$(echo $DYNAMIC_BLACKLIST | sed 's/,src-dst//')
+
+	    [ -n "$g_disconnect" ] && g_disconnect=src-dst
+	    ;;
+    esac
+
+    case $DYNAMIC_BLACKLIST in
+	ipset*,timeout*)
+	    #
+	    # This utility doesn't need to know about 'timeout=nnn'
+	    #
+	    DYNAMIC_BLACKLIST=$(echo $DYNAMIC_BLACKLIST | sed -r 's/,timeout=[[:digit:]]+//')
+	    ;;
+    esac
+
+    case $DYNAMIC_BLACKLIST in
+	[Nn]o)
+	    DYNAMIC_BLACKLIST='';
+	    ;;
+	[Yy]es)
+	    ;;
+	ipset|ipset::*|ipset-only|ipset-only::*)
+	    g_blacklistipset=SW_DBL$g_family
+	    ;;
+	ipset:[a-zA-Z]*)
+	    g_blacklistipset=${DYNAMIC_BLACKLIST#ipset:}
+	    g_blacklistipset=${g_blacklistipset%%:*}
+	    ;;
+	ipset-only:[a-zA-Z]*)
+	    g_blacklistipset=${DYNAMIC_BLACKLIST#ipset-only:}
+	    g_blacklistipset=${g_blacklistipset%%:*}
+	    ;;
+	*)
+	    fatal_error "Invalid value ($original) for DYNAMIC_BLACKLIST"
+	    ;;
+    esac
+}
+
 ################################################################################
 # The remaining functions are used by the Lite cli - they are overloaded by
 # the Standard CLI by loading lib.cli-std
@@ -3772,7 +3910,7 @@ get_config() {
 
     ensure_config_path
 
-    config=$(find_file ${g_program}.conf)
+    config=$(find_file ${PRODUCT}.conf)
 
     if [ -f $config ]; then
 	if [ -r $config ]; then
@@ -3898,53 +4036,29 @@ get_config() {
 
     g_loopback=$(find_loopback_interfaces)
 
-    if [ -n "$PAGER" -a -t 1 ]; then
-	case $PAGER in
-	    /*)
-		g_pager="$PAGER"
-		[ -f "$g_pager" ] || fatal_error "PAGER=$PAGER does not exist"
-		;;
-	    *)
-		g_pager=$(mywhich pager 2> /dev/null)
-		[ -n "$g_pager" ] || fatal_error "PAGER=$PAGER does not exist"
-		;;
-	esac
+    if [ -z "$g_nopager" ]; then
+	[ -n "$PAGER" ] || PAGER=$DEFAULT_PAGER
 
-	[ -x "$g_pager" ] || fatal_error "PAGER $g_pager is not executable"
+	if [ -n "$PAGER" -a -t 1 ]; then
+	    case $PAGER in
+		/*)
+		    g_pager="$PAGER"
+		    [ -f "$g_pager" ] || fatal_error "PAGER=$PAGER does not exist"
+		    ;;
+		*)
+		    g_pager=$(mywhich $PAGER 2> /dev/null)
+		    [ -n "$g_pager" ] || fatal_error "PAGER=$PAGER does not exist"
+		    ;;
+	    esac
 
-	g_pager="| $g_pager"
-     fi
+	    [ -x "$g_pager" ] || fatal_error "PAGER $g_pager is not executable"
+
+	    g_pager="| $g_pager"
+	fi
+    fi
 
     if [ -n "$DYNAMIC_BLACKLIST" ]; then
-	case $DYNAMIC_BLACKLIST in
-	    [Nn]o)
-		DYNAMIC_BLACKLIST='';
-		;;
-	    [Yy]es)
-	        ;;
-	    ipset|ipset::*|ipset-only|ipset-only::*|ipset,src-dst|ipset-only,src-dst::*)
-		g_blacklistipset=SW_DBL$g_family
-		;;
-	    ipset:[a-zA-Z]*)
-		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset:}
-		g_blacklistipset=${g_blacklistipset%%:*}
-		;;
-	    ipset,src-dst:[a-zA-Z]*)
-		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset,src-dst:}
-		g_blacklistipset=${g_blacklistipset%%:*}
-		;;
-	    ipset-only:[a-zA-Z]*)
-		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset-only:}
-		g_blacklistipset=${g_blacklistipset%%:*}
-		;;
-	    ipset-only,src-dst:[a-zA-Z]*)
-		g_blacklistipset=${DYNAMIC_BLACKLIST#ipset-only,src-dst:}
-		g_blacklistipset=${g_blacklistipset%%:*}
-		;;
-	    *)
-		fatal_error "Invalid value ($DYNAMIC_BLACKLIST) for DYNAMIC_BLACKLIST"
-		;;
-	esac
+	setup_dbl
     fi
 
     lib=$(find_file lib.cli-user)
@@ -4178,12 +4292,17 @@ usage() # $1 = exit status
     echo "   reenable <interface>"
     ecko "   refresh [ -d ] [ -n ] [ -T ] [ -D <directory> ] [ <chain>... ]"
     echo "   reject <address> ..."
-    ecko "   reload [ -s ] [ -c ] [ -r <root user> ] [ -T ] [ -i ] [ <directory> ] <system>"
+
+    if [ -n "$g_lite" ]; then
+	echo "   reload [ -n ] [ -p ] [ -f ] [ -C ] [ <directory> ]"
+    else
+	echo "   reload [ -n ] [ -p ] [-d] [ -f ] [ -c ] [ -T ] [ -i ] [ -C ] [ <directory> ]"
+    fi
 
     if [ -z "$g_lite" ]; then
-	echo "   remote-reload [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
-	echo "   remote-restart [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
-	echo "   remote-start [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-reload [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-restart [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
+	echo "   remote-start [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
     fi
 
     echo "   reset [ <chain> ... ]"
@@ -4202,6 +4321,7 @@ usage() # $1 = exit status
     echo "   savesets"
     echo "   [ show | list | ls ] [ -b ] [ -x ] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]"
     ecko "   [ show | list | ls ] actions"
+    ecko "   [ show | list | ls ] action <action>"
     echo "   [ show | list | ls ] arptables"
     echo "   [ show | list | ls ] [ -f ] capabilities"
     echo "   [ show | list | ls ] [ -x ] {bl|blacklists}"
@@ -4217,8 +4337,9 @@ usage() # $1 = exit status
 	echo "   [ show | list | ls ] ipa"
     fi
 
+    echo "   [ show | list | ls ] ipsec"
     echo "   [ show | list | ls ] [ -m ] log [<regex>]"
-    echo "   [ show | list | ls ] [ -x ] mangle|nat|raw|rawpost"
+    echo "   [ show | list | ls ] [ -x ] mangle|nat|raw"
     ecko "   [ show | list | ls ] macro <macro>"
     ecko "   [ show | list | ls ] macros"
     echo "   [ show | list | ls ] nfacct"
@@ -4247,7 +4368,7 @@ usage() # $1 = exit status
 #
 # This is the main entry point into the CLI. It directly handles all commands supported
 # by both the full and lite versions. Note, however, that functions such as start_command()
-# appear in both this library and it lib.cli-std. The ones in cli-std overload the ones
+# appear in both this library and in lib.cli-std. The ones in cli-std overload the ones
 # here if that lib is loaded below.
 #
 shorewall_cli() {
@@ -4289,17 +4410,24 @@ shorewall_cli() {
     g_loopback=
     g_compiled=
     g_pager=
+    g_nopager=
     g_blacklistipset=
+    g_disconnect=
 
     VERBOSE=
     VERBOSITY=1
-
-    [ -n "$g_lite" ] || . ${g_basedir}/lib.cli-std
+    #
+    # Set the default product based on the Shorewall packages installed
+    #
+    set_default_product
 
     finished=0
 
     while [ $finished -eq 0 ]; do
-	[ $# -eq 0 ] && usage 1
+	if [ $# -eq 0 ]; then
+	    setup_product_environment 1
+	    usage 1
+	fi
 	option=$1
 	case $option in
 	    -)
@@ -4384,6 +4512,34 @@ shorewall_cli() {
 			    g_timestamp=Yes
 			    option=${option#t}
 			    ;;
+			p*)
+			    g_nopager=Yes
+			    option=${option#p}
+			    ;;
+			6*)
+			    if [ "$PRODUCT" = shorewall ]; then
+				PRODUCT=shorewall6
+			    elif [ "$PRODUCT" = shorewall-lite ]; then
+				PRODUCT=shorewall6-lite
+			    fi
+			    option=${option#6}
+			    ;;
+			4*)
+			    if [ "$PRODUCT" = shorewall6 ]; then
+				PRODUCT=shorewall
+			    elif [ "$PRODUCT" = shorewall6-lite ]; then
+				PRODUCT=shorewall-lite
+			    fi
+			    option=${option#4}
+			    ;;
+			l*)
+			    if [ "$PRODUCT" = shorewall ]; then
+				PRODUCT=shorewall-lite
+			    elif [ "$PRODUCT" = shorewall6 ]; then
+				PRODUCT=shorewall6-lite
+			    fi
+			    option=${option#l}
+			    ;;
 			-)
 			    finished=1
 			    option=
@@ -4401,16 +4557,16 @@ shorewall_cli() {
 	esac
     done
 
-    if [ $# -eq 0 ]; then
-	usage 1
-    fi
+    setup_product_environment 1
+
+   [ -n "$g_lite" ] || . ${SHAREDIR}/shorewall/lib.cli-std
 
     PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
     MUTEX_TIMEOUT=
 
     [ -f ${g_confdir}/vardir ] && . ${g_confdir}/vardir
 
-    [ -n "${VARDIR:=/var/lib/$g_program}" ]
+    [ -n "${VARDIR:=/var/lib/$PRODUCT}" ]
 
     g_firewall=${VARDIR}/firewall
 
@@ -4425,26 +4581,6 @@ shorewall_cli() {
 
     banner="${g_product}-${SHOREWALL_VERSION} Status at $g_hostname -"
 
-    case $(echo -e) in
-	-e*)
-	    g_ring_bell="echo \a"
-	    g_echo_e="echo"
-	    ;;
-	*)
-	    g_ring_bell="echo -e \a"
-	    g_echo_e="echo -e"
-	    ;;
-    esac
-
-    case $(echo -n "Testing") in
-	-n*)
-	    g_echo_n=
-	    ;;
-	*)
-	    g_echo_n=-n
-	    ;;
-    esac
-
     COMMAND=$1
 
     case "$COMMAND" in

Shorewall-core/lib.common

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
+# Shorewall 5.1 -- /usr/share/shorewall/lib.common.
 #
-#     (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -269,53 +269,48 @@ loadmodule() # $1 = module name, $2 - * arguments
 {
     local modulename
     modulename=$1
+    shift
+    local moduleoptions
+    moduleoptions=$*
     local modulefile
     local suffix
 
     if [ -d /sys/module/ ]; then
 	if ! list_search $modulename $DONT_LOAD; then
 	    if [ ! -d /sys/module/$modulename ]; then
-		shift
-
-		for suffix in $MODULE_SUFFIX ; do
-		    for directory in $moduledirectories; do
-			modulefile=$directory/${modulename}.${suffix}
-
-			if [ -f $modulefile ]; then
-			    case $moduleloader in
-				insmod)
-				    insmod $modulefile $*
-				    ;;
-				*)
-				    modprobe $modulename $*
-				    ;;
-			    esac
-			    break 2
-			fi
-		    done
-		done
+		case $moduleloader in
+		    insmod)
+			for directory in $moduledirectories; do
+			    for modulefile in $directory/${modulename}.*; do
+				if [ -f $modulefile ]; then
+				    insmod $modulefile $moduleoptions
+				    return
+				fi
+			    done
+			done
+			;;
+		    *)
+			modprobe -q $modulename $moduleoptions
+			;;
+		esac
 	    fi
 	fi
     elif ! list_search $modulename $DONT_LOAD $MODULES; then
-	shift
-
-	for suffix in $MODULE_SUFFIX ; do
-	    for directory in $moduledirectories; do
-		modulefile=$directory/${modulename}.${suffix}
-
-		if [ -f $modulefile ]; then
-		    case $moduleloader in
-			insmod)
-			    insmod $modulefile $*
-			    ;;
-			*)
-			    modprobe $modulename $*
-			    ;;
-		    esac
-		    break 2
-		fi
-	    done
-	done
+	case $moduleloader in
+	    insmod)
+		for directory in $moduledirectories; do
+		    for modulefile in $directory/${modulename}.*; do
+			if [ -f $modulefile ]; then
+			    insmod $modulefile $moduleoptions
+			    return
+			fi
+		    done
+		done
+		;;
+	    *)
+		modprobe -q $modulename $moduleoptions
+		;;
+	esac
     fi
 }
 
@@ -338,8 +333,6 @@ reload_kernel_modules() {
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
-
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)
@@ -394,8 +387,6 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
-
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)

Shorewall-core/lib.core

@@ -0,0 +1,440 @@
+#
+# Shorewall 5.1 -- /usr/share/shorewall/lib.core
+#
+#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# This library contains the code common to all Shorewall components except the
+# generated scripts.
+#
+
+SHOREWALL_LIBVERSION=50108
+
+#
+# Fatal Error
+#
+fatal_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 2
+}
+
+setup_product_environment() { # $1 = if non-empty, source shorewallrc again now that we have the correct product
+    g_basedir=${SHAREDIR}/shorewall
+
+    g_sharedir="$SHAREDIR"/$PRODUCT
+    g_confdir="$CONFDIR"/$PRODUCT
+
+    case $PRODUCT in
+	shorewall)
+	    g_product="Shorewall"
+	    g_family=4
+	    g_tool=iptables
+	    g_lite=
+	    ;;
+	shorewall6)
+	    g_product="Shorewall6"
+	    g_family=6
+	    g_tool=ip6tables
+	    g_lite=
+	    ;;
+	shorewall-lite)
+	    g_product="Shorewall Lite"
+	    g_family=4
+	    g_tool=iptables
+	    g_lite=Yes
+	    ;;
+	shorewall6-lite)
+	    g_product="Shorewall6 Lite"
+	    g_family=6
+	    g_tool=ip6tables
+	    g_lite=Yes
+	    ;;
+	*)
+	    fatal_error "Unknown PRODUCT ($PRODUCT)"
+	    ;;
+    esac
+
+    [ -f ${SHAREDIR}/${PRODUCT}/version ] || fatal_error "$g_product does not appear to be installed on this system"
+    #
+    # We need to do this again, now that we have the correct product
+    #
+    [ -n "$1" ] && . ${g_basedir}/shorewallrc
+
+    if [ -z "${VARLIB}" ]; then
+	VARLIB=${VARDIR}
+	VARDIR=${VARLIB}/${PRODUCT}
+    elif [ -z "${VARDIR}" ]; then
+	VARDIR="${VARLIB}/${PRODUCT}"
+    fi
+}
+
+set_default_product() {
+    case $(basename $0) in
+	shorewall6)
+	    PRODUCT=shorewall6
+	    ;;
+	shorewall4)
+	    PRODUCT=shorewall
+	    ;;
+	shorewall-lite)
+	    PRODUCT=shorewall-lite
+	    ;;
+	shorewall6-lite)
+	    PRODUCT=shorewall6-lite
+	    ;;
+	*)
+	    if [ -f ${g_basedir}/version ]; then
+		PRODUCT=shorewall
+	    elif [ -f ${SHAREDIR}/shorewall-lite/version ]; then
+		PRODUCT=shorewall-lite
+	    elif [ -f ${SHAREDIR}/shorewall6-lite/version ]; then
+		PRODUCT=shorewall6-lite
+	    else
+		fatal_error "No Shorewall firewall product is installed"
+	    fi
+	    ;;
+    esac
+}
+
+# Not configured Error
+#
+not_configured_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 6
+}
+
+#
+# Conditionally produce message
+#
+progress_message() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -gt 1 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+progress_message2() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -gt 0 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+progress_message3() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -ge 0 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+#
+# Undo the effect of 'separate_list()'
+#
+combine_list()
+{
+    local f
+    local o
+    o=
+
+    for f in $* ; do
+        o="${o:+$o,}$f"
+    done
+
+    echo $o
+}
+
+#
+# Validate an IP address
+#
+valid_address() {
+    local x
+    local y
+    local ifs
+    ifs=$IFS
+
+    IFS=.
+
+    for x in $1; do
+	case $x in
+	    [0-9]|[0-9][0-9]|[1-2][0-9][0-9])
+		[ $x -lt 256 ] || { IFS=$ifs; return 2; }
+                ;;
+	    *)
+	        IFS=$ifs
+		return 2
+		;;
+	esac
+    done
+
+    IFS=$ifs
+
+    return 0
+}
+
+#
+# Miserable Hack to work around broken BusyBox ash in OpenWRT
+#
+addr_comp() {
+    test $(bc <<EOF
+$1 > $2
+EOF
+) -eq 1
+
+}
+
+#
+# Enumerate the members of an IP range -- When using a shell supporting only
+# 32-bit signed arithmetic, the range cannot span 128.0.0.0.
+#
+# Comes in two flavors:
+#
+# ip_range() - produces a mimimal list of network/host addresses that spans
+#              the range.
+#
+# ip_range_explicit() - explicitly enumerates the range.
+#
+ip_range() {
+    local first
+    local last
+    local l
+    local x
+    local y
+    local z
+    local vlsm
+
+    case $1 in
+	!*)
+	    #
+	    # Let iptables complain if it's a range
+	    #
+	    echo $1
+	    return
+	    ;;
+	[0-9]*.*.*.*-*.*.*.*)
+            ;;
+	*)
+	    echo $1
+	    return
+	    ;;
+    esac
+
+    first=$(decodeaddr ${1%-*})
+    last=$(decodeaddr ${1#*-})
+
+    if addr_comp $first $last; then
+	fatal_error "Invalid IP address range: $1"
+    fi
+
+    l=$(( $last + 1 ))
+
+    while addr_comp $l $first; do
+	vlsm=
+	x=31
+	y=2
+	z=1
+
+	while [ $(( $first % $y )) -eq 0 ] && ! addr_comp $(( $first + $y )) $l; do
+	    vlsm=/$x
+	    x=$(( $x - 1 ))
+	    z=$y
+	    y=$(( $y * 2 ))
+	done
+
+	echo $(encodeaddr $first)$vlsm
+	first=$(($first + $z))
+    done
+}
+
+ip_range_explicit() {
+    local first
+    local last
+
+    case $1 in
+    [0-9]*.*.*.*-*.*.*.*)
+	;;
+    *)
+	echo $1
+	return
+	;;
+    esac
+
+    first=$(decodeaddr ${1%-*})
+    last=$(decodeaddr ${1#*-})
+
+    if addr_comp $first $last; then
+	fatal_error "Invalid IP address range: $1"
+    fi
+
+    while ! addr_comp $first $last; do
+	echo $(encodeaddr $first)
+	first=$(($first + 1))
+    done
+}
+
+[ -z "$LEFTSHIFT" ] && . ${g_basedir}/lib.common
+
+#
+# Netmask to VLSM
+#
+ip_vlsm() {
+    local mask
+    mask=$(decodeaddr $1)
+    local vlsm
+    vlsm=0
+    local x
+    x=$(( 128 << 24 )) # 0x80000000
+
+    while [ $(( $x & $mask )) -ne 0 ]; do
+	[ $mask -eq $x ] && mask=0 || mask=$(( $mask $LEFTSHIFT 1 )) # Not all shells shift 0x80000000 left properly.
+	vlsm=$(($vlsm + 1))
+    done
+
+    if [ $(( $mask & 2147483647 )) -ne 0 ]; then # 2147483647 = 0x7fffffff
+	echo "Invalid net mask: $1" >&2
+    else
+	echo $vlsm
+    fi
+}
+
+#
+# Set default config path
+#
+ensure_config_path() {
+    local F
+    F=${g_sharedir}/configpath
+    if [ -z "$CONFIG_PATH" ]; then
+	[ -f $F ] || { echo "   ERROR: $F does not exist"; exit 2; }
+	. $F
+    fi
+
+    if [ -n "$g_shorewalldir" ]; then
+	[ "${CONFIG_PATH%%:*}" = "$g_shorewalldir" ] || CONFIG_PATH=$g_shorewalldir:$CONFIG_PATH
+    fi
+}
+
+#
+# Get fully-qualified name of file
+#
+resolve_file() # $1 = file name
+{
+    local pwd
+    pwd=$PWD
+
+    case $1 in
+	/*)
+	    echo $1
+	    ;;
+	.)
+	    echo $pwd
+	    ;;
+	./*)
+	    echo ${pwd}${1#.}
+	    ;;
+	..)
+	    cd ..
+	    echo $PWD
+	    cd $pwd
+	    ;;
+	../*)
+	    cd ..
+	    resolve_file ${1#../}
+	    cd $pwd
+	    ;;
+	*)
+	    echo $pwd/$1
+	    ;;
+    esac
+}
+
+# Determine which version of mktemp is present (if any) and set MKTEMP accortingly:
+#
+#     None - No mktemp
+#     BSD  - BSD mktemp (Mandrake)
+#     STD  - mktemp.org mktemp
+#
+find_mktemp() {
+    local mktemp
+    mktemp=`mywhich mktemp 2> /dev/null`
+
+    if [ -n "$mktemp" ]; then
+	if qt mktemp -V ; then
+	    MKTEMP=STD
+	else
+	    MKTEMP=BSD
+	fi
+    else
+	MKTEMP=None
+    fi
+}
+
+#
+# create a temporary file. If a directory name is passed, the file will be created in
+# that directory. Otherwise, it will be created in a temporary directory.
+#
+mktempfile() {
+
+    [ -z "$MKTEMP" ] && find_mktemp
+
+    if [ $# -gt 0 ]; then
+	case "$MKTEMP" in
+	    BSD)
+		mktemp $1/shorewall.XXXXXX
+		;;
+	    STD)
+		mktemp -p $1 shorewall.XXXXXX
+		;;
+	    None)
+		> $1/shorewall-$$ && echo $1/shorewall-$$
+		;;
+	    *)
+		error_message "ERROR:Internal error in mktempfile"
+		;;
+	esac
+    else
+	case "$MKTEMP" in
+	    BSD)
+		mktemp ${TMPDIR:-/tmp}/shorewall.XXXXXX
+		;;
+	    STD)
+		mktemp -t shorewall.XXXXXX
+		;;
+	    None)
+		rm -f ${TMPDIR:-/tmp}/shorewall-$$
+		> ${TMPDIR:-}/shorewall-$$ && echo ${TMPDIR:-/tmp}/shorewall-$$
+		;;
+	    *)
+		error_message "ERROR:Internal error in mktempfile"
+		;;
+	esac
+    fi
+}

Shorewall-core/lib.installer

@@ -0,0 +1,89 @@
+#
+#
+# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
+#
+#     (c) 2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# The purpose of this library is to hold those functions used by the products installer.
+#
+#########################################################################################
+
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+delete_file() # $1 = file to delete
+{
+    rm -f $1
+}
+
+require()
+{
+    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
+}
+
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir $1
+    chmod $2 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+}
+
+make_parent_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod $2 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNER:$GROUP $1
+}
+
+cant_autostart()
+{
+    echo
+    echo  "WARNING: Unable to configure $Product to start automatically at boot" >&2
+}

Shorewall-core/lib.uninstaller

@@ -0,0 +1,106 @@
+#
+#
+# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
+#
+#     (c) 2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# The purpose of this library is to hold those functions used by the products uninstaller.
+#
+#########################################################################################
+
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+remove_file() # $1 = file to remove
+{
+    if [ -n "$1" ] ; then
+        if [ -f $1 -o -L $1 ] ; then
+            rm -f $1
+            echo "$1 Removed"
+        fi
+    fi
+}
+
+remove_directory() # $1 = directory to remove
+{
+    if [ -n "$1" ] ; then
+        if [ -d $1 ] ; then
+            rm -rf $1
+            echo "$1 Removed"
+        fi
+    fi
+}
+
+remove_file_with_wildcard() # $1 = file with wildcard to remove
+{
+    if [ -n "$1" ] ; then
+        for f in $1; do
+            if [ -d $f ] ; then
+                rm -rf $f
+                echo "$f Removed"
+            elif [ -f $f -o -L $f ] ; then
+                rm -f $f
+                echo "$f Removed"
+            fi
+        done
+    fi
+}
+
+restore_file() # $1 = file to restore
+{
+    if [ -f ${1}-shorewall.bkout ]; then
+	if (mv -f ${1}-shorewall.bkout $1); then
+	    echo
+	    echo "$1 restored"
+        else
+	    exit 1
+        fi
+    fi
+}

Shorewall-core/shorewall

@@ -1,8 +1,8 @@
 #!/bin/sh
 #
-#     Shorewall Packet Filtering Firewall Control Program - V5.0
+#     Shorewall Packet Filtering Firewall Control Program - V5.1
 #
-#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015 -
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015-2017
 #         Tom Eastep (teastep@shorewall.net)
 #
 #	Shorewall documentation is available at http://www.shorewall.net
@@ -25,6 +25,10 @@
 #       For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
 #
 ################################################################################################
+#
+# Default product is Shorewall. PRODUCT will be set based on $0 and on passed -[46] and -l
+# options
+#
 PRODUCT=shorewall
 
 #
@@ -32,11 +36,8 @@ PRODUCT=shorewall
 #
 . /usr/share/shorewall/shorewallrc
 
-g_program=$PRODUCT
-g_sharedir="$SHAREDIR"/shorewall
-g_confdir="$CONFDIR"/shorewall
-g_readrc=1
+g_basedir=${SHAREDIR}/shorewall
 
-. $g_sharedir/lib.cli
+. ${g_basedir}/lib.cli
 
 shorewall_cli $@

Shorewall-core/shorewallrc.apple

@@ -19,3 +19,4 @@ SERVICEFILE=                           #Unused on OS X
 SYSCONFDIR=                            #Unused on OS X
 SPARSE=Yes                             #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
 VARLIB=/var/lib                        #Unused on OS X
+DEFAULT_PAGER=			       #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.archlinux

@@ -20,3 +20,4 @@ SERVICEFILE=                           #Name of the file to install in $SYSTEMD.
 SPARSE=                                #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                        #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT              #Directory where product variable data is stored.
+DEFAULT_PAGER=			       #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.cygwin

@@ -19,3 +19,4 @@ SERVICEFILE=                          #Unused on Cygwin
 SYSCONFDIR=                           #Unused on Cygwin
 SPARSE=Yes                            #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
 VARLIB=/var/lib                       #Unused on Cygwin
+DEFAULT_PAGER=			      #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.debian.systemd

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 4.5 rc file
+# Debian Shorewall 5.0 rc file
 #
 BUILD=					#Default is to detect the build system
 HOST=debian
@@ -14,10 +14,11 @@ INITDIR=				#Directory where SysV init scripts are installed.
 INITFILE=				#Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
 ANNOTATED=				#If non-zero, annotated configuration files are installed
-SYSCONFFILE=default.debian		#Name of the distributed file to be installed in $SYSCONFDIR
+SYSCONFFILE=default.debian.systemd		#Name of the distributed file to be installed in $SYSCONFDIR
 SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
 SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib				#Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT		#Directory where product variable data is stored.
+DEFAULT_PAGER=/usr/bin/less		#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.debian.sysvinit

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 4.5 rc file
+# Debian Shorewall 5.0 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=debian
@@ -14,10 +14,11 @@ INITDIR=/etc/init.d                     #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SYSCONFFILE=default.debian              #Name of the distributed file to be installed in $SYSCONFDIR
+SYSCONFFILE=default.debian.sysvinit              #Name of the distributed file to be installed in $SYSCONFDIR
 SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default                 #Directory where SysV init parameter files are installed
 SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes                              #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=/usr/bin/less		#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.default

@@ -1,8 +1,8 @@
 #
 # Default Shorewall 5.0 rc file
 #
-HOST=linux                              #Generic Linux
 BUILD=                                  #Default is to detect the build system
+HOST=linux                              #Generic Linux
 PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
 SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
@@ -21,3 +21,4 @@ SYSCONFDIR=                             #Directory where SysV init parameter fil
 SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.openwrt

@@ -1,8 +1,8 @@
 #
-# Created by Shorewall Core version 5.0.2-RC1 configure -  Fri, Nov 06, 2015 10:02:03 AM
-#
-# Input: host=openwrt
+# OpenWRT Shorewall 5.0 rc file
 #
+BUILD=                                 #Default is to detect the build system
+HOST=openwrt
 PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
 SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
@@ -21,3 +21,4 @@ SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.se
 SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/lib                             #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.redhat

@@ -21,3 +21,4 @@ SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter fil
 SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.slackware

@@ -22,3 +22,4 @@ SYSCONFDIR=                                #Name of the directory where SysV ini
 ANNOTATED=                                 #If non-empty, install annotated configuration files
 VARLIB=/var/lib                            #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT                  #Directory where product variable data is stored.
+DEFAULT_PAGER=				   #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.suse

@@ -21,3 +21,4 @@ SYSCONFDIR=/etc/sysconfig/                            #Directory where SysV init
 SPARSE=                                               #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                                       #Directory where persistent product data is stored.
 VARDIR=${VARLIB}/$PRODUCT                             #Directory where product variable data is stored.
+DEFAULT_PAGER=				   	      #Pager to use if none specified in shorewall[6].conf

Shorewall-core/uninstall.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall
+# Script to back uninstall Shoreline Firewall Core Modules
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
@@ -26,64 +26,75 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx #The Build script inserts the actual version
-PRODUCT="shorewall-core"
+VERSION=xxx # The Build script inserts the actual version
+PRODUCT=shorewall-core
 Product="Shorewall Core"
- 
+
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <shorewallrc file> ]"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
     exit $1
 }
 
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-restore_file() # $1 = file to restore
-{
-    if [ -f ${1}-shorewall.bkout ]; then
-	if (mv -f ${1}-shorewall.bkout $1); then
-	    echo
-	    echo "$1 restored"
-        else
-	    exit 1
-        fi
-    fi
-}
-
-remove_file() # $1 = file to restore
-{
-    if [ -f $1 -o -L $1 ] ; then
-	rm -f $1
-	echo "$1 Removed"
-    fi
-}
-
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
+#
+# Source common functions
+#
+. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
+#
+# Parse the run line
+#
+finished=0
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Uninstaller Version $VERSION"
+			exit 0
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
+
 #
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-	. ./shorewallrc
+        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
     elif [ -f ~/.shorewallrc ]; then
-	. ~/.shorewallrc || exit 1
-	file=./.shorewallrc
+        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	. /usr/share/shorewall/shorewallrc
+        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -93,11 +104,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file
+	    file=./$file || exit 1
 	    ;;
     esac
 
-    . $file
+    . $file || fatal_error "Can not load the RC file: $file"
 else
     usage 1
 fi
@@ -105,20 +116,26 @@ fi
 if [ -f ${SHAREDIR}/shorewall/coreversion ]; then
     INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall/coreversion)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: Shorewall Core Version $INSTALLED_VERSION is installed"
+	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: Shorewall Core Version $VERSION is not installed"
+    echo "WARNING: $Product Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling Shorewall Core $VERSION"
+echo "Uninstalling $Product $VERSION"
 
-rm -rf ${SHAREDIR}/shorewall
-rm -f ~/.shorewallrc
-
-echo "Shorewall Core Uninstalled"
+if [ -n "${MANDIR}" ]; then
+    remove_file_with_wildcard ${MANDIR}/man5/shorewall\*
+    remove_file_with_wildcard ${MANDIR}/man8/shorewall\*
+fi
 
+remove_directory ${SHAREDIR}/shorewall
+remove_file ~/.shorewallrc
 
+#
+# Report Success
+#
+echo "$Product $VERSION Uninstalled"

Shorewall-init/default.debian.systemd

@@ -0,0 +1,21 @@
+# List the Shorewall products that Shorewall-init is to
+# initialize (space-separated list).
+#
+# Sample: PRODUCTS="shorewall shorewall6"
+#
+PRODUCTS=""
+
+#
+# Set this to 1 if you want Shorewall-init to react to
+# ifup/ifdown and NetworkManager events
+#
+IFUPDOWN=0
+#
+# Where Up/Down events get logged
+#
+LOGFILE=/var/log/shorewall-ifupdown.log
+
+# Startup options - set verbosity to 0 (minimal reporting)
+OPTIONS="-V0"
+
+# IOF

Shorewall-init/default.debian.sysvinit

@@ -0,0 +1,27 @@
+# List the Shorewall products that Shorewall-init is to
+# initialize (space-separated list).
+#
+# Sample: PRODUCTS="shorewall shorewall6"
+#
+PRODUCTS=""
+
+#
+# Set this to 1 if you want Shorewall-init to react to
+# ifup/ifdown and NetworkManager events
+#
+IFUPDOWN=0
+#
+# Set this to the name of the file that is to hold
+# ipset contents. Shorewall-init will load those ipsets
+# during 'start' and will save them there during 'stop'.
+#
+SAVE_IPSETS=""
+#
+# Where Up/Down events get logged
+#
+LOGFILE=/var/log/shorewall-ifupdown.log
+
+# Startup options - set verbosity to 0 (minimal reporting)
+OPTIONS="-V0"
+
+# IOF

Shorewall-init/ifupdown.debian.sh

@@ -31,8 +31,10 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
-	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/$PRODUCT compile
+	if [ $PRODUCT = shorewall ]; then
+	    ${SBINDIR}/shorewall compile
+	elif [ $PRODUCT = shorewall6 ]; then
+	    ${SBINDIR}/shorewall -6 compile
 	fi
     fi
 }
@@ -128,7 +130,7 @@ for PRODUCT in $PRODUCTS; do
     setstatedir
 
     if [ -x $VARLIB/$PRODUCT/firewall ]; then
-	  ( ${VARLIB}/$PRODUCT/firewall -V0 $COMMAND $INTERFACE >> $LOGFILE 2>&1 ) || true
+	( ${VARLIB}/$PRODUCT/firewall -V0 $COMMAND $INTERFACE >> $LOGFILE 2>&1 ) || true
     fi
 done
 

Shorewall-init/ifupdown.fedora.sh

@@ -33,9 +33,11 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ ! -x "$STATEDIR/firewall" ]; then
-	if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
-	    ${SBINDIR}/$PRODUCT $OPTIONS compile
+    if [ ! -x $STATEDIR/firewall ]; then
+	if [ $PRODUCT = shorewall ]; then
+	    ${SBINDIR}/shorewall compile
+	elif [ $PRODUCT = shorewall6 ]; then
+	    ${SBINDIR}/shorewall -6 compile
 	fi
     fi
 }

Shorewall-init/ifupdown.suse.sh

@@ -31,8 +31,10 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
-	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/$PRODUCT compile
+	if [ $PRODUCT = shorewall ]; then
+	    ${SBINDIR}/shorewall compile
+	elif [ $PRODUCT = shorewall6 ]; then
+	    ${SBINDIR}/shorewall -6 compile
 	fi
     fi
 }

Shorewall-init/init.debian.sh

@@ -73,8 +73,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
     else
 	return 0
     fi
@@ -102,7 +104,7 @@ shorewall_start () {
   local PRODUCT
   local STATEDIR
 
-  echo -n "Initializing \"Shorewall-based firewalls\": "
+  printf "Initializing \"Shorewall-based firewalls\": "
 
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
@@ -123,7 +125,7 @@ shorewall_start () {
 
   if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
 
-      echo -n "Restoring ipsets: "
+      printf "Restoring ipsets: "
 
       if ! ipset -R < "$SAVE_IPSETS"; then
 	  echo_notdone
@@ -140,7 +142,7 @@ shorewall_stop () {
   local PRODUCT
   local STATEDIR
 
-  echo -n "Clearing \"Shorewall-based firewalls\": "
+  printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
 	  if [ -x ${STATEDIR}/firewall ]; then
@@ -157,8 +159,9 @@ shorewall_stop () {
 
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
       else
+	  rm -f "${SAVE_IPSETS}.tmp"
 	  echo_notdone
       fi
 

Shorewall-init/init.fedora.sh

@@ -44,8 +44,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
-	${SBINDIR}/$PRODUCT $OPTIONS compile -c
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
     else
 	return 0
     fi
@@ -62,7 +64,11 @@ start () {
 	return 6 #Not configured
     fi
 
-    echo -n "Initializing \"Shorewall-based firewalls\": "
+    printf "Initializing \"Shorewall-based firewalls\": "
+
+    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+	ipset -R < "$SAVE_IPSETS"
+    fi
 
     for PRODUCT in $PRODUCTS; do
 	setstatedir
@@ -97,7 +103,7 @@ stop () {
     local PRODUCT
     local STATEDIR
 
-    echo -n "Clearing \"Shorewall-based firewalls\": "
+    printf "Clearing \"Shorewall-based firewalls\": "
 
     for PRODUCT in $PRODUCTS; do
 	setstatedir
@@ -118,6 +124,15 @@ stop () {
     done
 
     if [ $retval -eq 0 ]; then
+	if [ -n "$SAVE_IPSETS" ]; then
+	    mkdir -p $(dirname "$SAVE_IPSETS")
+	    if ipset -S > "${SAVE_IPSETS}.tmp"; then
+		grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	    else
+		rm -f "${SAVE_IPSETS}.tmp"
+	    fi
+	fi
+
 	rm -f $lockfile
 	success
     else

Shorewall-init/init.openwrt.sh

@@ -75,8 +75,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
     else
 	return 0
     fi
@@ -87,7 +89,7 @@ start () {
     local PRODUCT
   local STATEDIR
 
-  echo -n "Initializing \"Shorewall-based firewalls\": "
+  printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
 	  if [ -x ${STATEDIR}/firewall ]; then
@@ -112,7 +114,7 @@ stop () {
     local PRODUCT
     local STATEDIR
 
-    echo -n "Clearing \"Shorewall-based firewalls\": "
+    printf "Clearing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
 	    if [ -x ${STATEDIR}/firewall ]; then
@@ -124,7 +126,9 @@ stop () {
     if [ -n "$SAVE_IPSETS" ]; then
 	mkdir -p $(dirname "$SAVE_IPSETS")
 	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	else
+	    rm -f "${SAVE_IPSETS}.tmp"
 	fi
     fi
 }

Shorewall-init/init.sh

@@ -81,7 +81,7 @@ shorewall_start () {
   local PRODUCT
   local STATEDIR
 
-  echo -n "Initializing \"Shorewall-based firewalls\": "
+  printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
 	  if [ -x ${STATEDIR}/firewall ]; then
@@ -104,7 +104,7 @@ shorewall_stop () {
   local PRODUCT
   local STATEDIR
 
-  echo -n "Clearing \"Shorewall-based firewalls\": "
+  printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
 	  if [ -x ${STATEDIR}/firewall ]; then
@@ -116,7 +116,9 @@ shorewall_stop () {
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+      else
+	  rm -f "${SAVE_IPSETS}.tmp"
       fi
   fi
 

Shorewall-init/init.suse.sh

@@ -79,8 +79,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
     else
 	return 0
     fi
@@ -91,7 +93,7 @@ shorewall_start () {
   local PRODUCT
   local STATEDIR
 
-  echo -n "Initializing \"Shorewall-based firewalls\": "
+  printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
 	  if [ -x $STATEDIR/firewall ]; then
@@ -112,7 +114,7 @@ shorewall_stop () {
   local PRODUCT
   local STATEDIR
 
-  echo -n "Clearing \"Shorewall-based firewalls\": "
+  printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
 	  if [ -x ${STATEDIR}/firewall ]; then
@@ -124,7 +126,9 @@ shorewall_stop () {
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+      else
+	  rm -f "${SAVE_IPSETS}.tmp"
       fi
   fi
 }

Shorewall-init/install.sh

@@ -27,58 +27,21 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=xxx #The Build script inserts the actual version.
+VERSION=xxx # The Build script inserts the actual version
 PRODUCT=shorewall-init
 Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <configuration-file> ]"
-    echo "       $ME -v"
-    echo "       $ME -h"
-    echo "       $ME -n"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
     exit $1
 }
 
-fatal_error() 
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-cant_autostart()
-{
-    echo
-    echo  "WARNING: Unable to configure shorewall init to start automatically at boot" >&2
-}
-
 install_file() # $1 = source $2 = target $3 = mode
 {
     if cp -f $1 $2; then
@@ -97,23 +60,16 @@ install_file() # $1 = source $2 = target $3 = mode
     exit 1
 }
 
-make_directory() # $1 = directory , $2 = mode
-{
-    mkdir -p $1
-    chmod 0755 $1
-    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
-}
-
-require() 
-{
-    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
-}
-
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
+#
+# Source common functions
+#
+. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
 #
 # Parse the run line
 #
@@ -134,7 +90,7 @@ while [ $finished -eq 0 ] ; do
 			usage 0
 			;;
 		    v)
-			echo "Shorewall-init Firewall Installer Version $VERSION"
+			echo "$Product Firewall Installer Version $VERSION"
 			exit 0
 			;;
 		    n*)
@@ -159,17 +115,17 @@ done
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
-    #
-    # Load packager's settings if any
-    #
     if [ -f ./shorewallrc ]; then
-	. ./shorewallrc || exit 1
-	file=~/.shorewallrc
+	file=./shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f ~/.shorewallrc ]; then
-	. ~/.shorewallrc || exit 1
-	file=./.shorewallrc
-     else
-	fatal_error "No configuration file specified and ~/.shorewallrc not found"
+	file=~/.shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    elif [ -f /usr/share/shorewall/shorewallrc ]; then
+	file=/usr/share/shorewall/shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    else
+	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
 elif [ $# -eq 1 ]; then
     file=$1
@@ -177,11 +133,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file
+	    file=./$file || exit 1
 	    ;;
     esac
 
-    . $file
+    . $file || fatal_error "Can not load the RC file: $file"
 else
     usage 1
 fi
@@ -298,12 +254,10 @@ case "$HOST" in
 	echo "Installing Openwrt-specific configuration..."
 	;;
     linux)
-	echo "ERROR: Shorewall-init is not supported on this system" >&2
-	exit 1
+	fatal_error "Shorewall-init is not supported on this system"
 	;;
     *)
-	echo "ERROR: Unsupported HOST distribution: \"$HOST\"" >&2
-	exit 1;
+	fatal_error "Unsupported HOST distribution: \"$HOST\""
 	;;
 esac
 
@@ -315,30 +269,27 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
     
-    make_directory ${DESTDIR}${INITDIR} 0755
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
 fi
 
-echo "Installing Shorewall Init Version $VERSION"
+echo "Installing $Product Version $VERSION"
 
 #
 # Check for /usr/share/shorewall-init/version
 #
-if [ -f ${DESTDIR}${SHAREDIR}/shorewall-init/version ]; then
+if [ -f ${DESTDIR}${SHAREDIR}/$PRODUCT/version ]; then
     first_install=""
 else
     first_install="Yes"
 fi
 
-if [ -n "$DESTDIR" ]; then
-    mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
-    chmod 0755 ${DESTDIR}${CONFDIR}/logrotate.d
-fi
+[ -n "$DESTDIR" ] && make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
 
 #
 # Install the Firewall Script
 #
 if [ -n "$INITFILE" ]; then
-    mkdir -p ${DESTDIR}${INITDIR}
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
     install_file $INITSOURCE ${DESTDIR}${INITDIR}/$INITFILE 0544
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${INITDIR}/$INITFILE
     
@@ -357,25 +308,21 @@ if [ -z "${SERVICEDIR}" ]; then
 fi
 
 if [ -n "$SERVICEDIR" ]; then
-    mkdir -p ${DESTDIR}${SERVICEDIR}
+    make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
     install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
-    if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
-	mkdir -p ${DESTDIR}${SBINDIR}
-        chmod 0755 ${DESTDIR}${SBINDIR}
-    fi
-    install_file shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init 0700
-    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall-init
-    echo "CLI installed as ${DESTDIR}${SBINDIR}/shorewall-init"
+    [ -n "$DESTDIR" -o $configure -eq 0 ] && make_parent_directory ${DESTDIR}${SBINDIR} 0755
+    install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0700
+    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
+    echo "CLI installed as ${DESTDIR}${SBINDIR}/$PRODUCT"
 fi
 
 #
 # Create /usr/share/shorewall-init if needed
 #
-mkdir -p ${DESTDIR}${SHAREDIR}/shorewall-init
-chmod 0755 ${DESTDIR}${SHAREDIR}/shorewall-init
+make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
 
 #
 # Install logrotate file
@@ -388,55 +335,53 @@ fi
 #
 # Create the version file
 #
-echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/shorewall-init/version
-chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
+echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/$PRODUCT/version
+chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 
 #
 # Remove and create the symbolic link to the init script
 #
 if [ -z "$DESTDIR" ]; then
-    rm -f ${SHAREDIR}/shorewall-init/init
-    ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/shorewall-init/init
+    rm -f ${SHAREDIR}/$PRODUCT/init
+    ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
 fi
 
 if [ $HOST = debian ]; then
     if [ -n "${DESTDIR}" ]; then
-	mkdir -p ${DESTDIR}${ETC}/network/if-up.d/
-	mkdir -p ${DESTDIR}${ETC}/network/if-down.d/
-	mkdir -p ${DESTDIR}${ETC}/network/if-post-down.d/
+	make_parent_directory ${DESTDIR}${ETC}/network/if-up.d 0755
+	make_parent_directory ${DESTDIR}${ETC}/network/if-down.d 0755
+	make_parent_directory ${DESTDIR}${ETC}/network/if-post-down.d 0755
     elif [ $configure -eq 0 ]; then
-	mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
-	mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
-	mkdir -p ${DESTDIR}${CONFDIR}/network/if-post-down.d/
+	make_parent_directory ${DESTDIR}${CONFDIR}/network/if-up.d 0755
+	make_parent_directory ${DESTDIR}${CONFDIR}/network/if-down.d 0755
+	make_parent_directory ${DESTDIR}${CONFDIR}/network/if-post-down.d 0755
     fi
 
-    if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
-	if [ -n "${DESTDIR}" ]; then
-	    mkdir -p ${DESTDIR}${ETC}/default
-	fi
+    if [ ! -f ${DESTDIR}${CONFDIR}/default/$PRODUCT ]; then
+	[ -n "${DESTDIR}" ] && make_parent_directory ${DESTDIR}${ETC}/default 0755
 
-	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
-	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
-	echo "sysconfig file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+	[ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/default 0755
+	install_file ${SYSCONFFILE} ${DESTDIR}${ETC}/default/$PRODUCT 0644
+	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     IFUPDOWN=ifupdown.debian.sh
 else
     if [ -n "$DESTDIR" ]; then
-	mkdir -p ${DESTDIR}${SYSCONFDIR}
+	make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
 
 	if [ -z "$RPM" ]; then
 	    if [ $HOST = suse ]; then
-		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-up.d
-		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-down.d
+		make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-up.d 0755
+		make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-down.d 0755
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
 	    elif [ $HOST = openwrt ]; then
-		# Not implemented on openwrt
+		# Not implemented on OpenWRT
 		/bin/true
 	    else
-		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
+		make_parent_directory ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d 0755
 	    fi
 	fi
     fi
@@ -458,13 +403,13 @@ if [ $HOST != openwrt ]; then
 
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
 
-    mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
+    make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
 
-    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
+    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown 0544
 fi
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
-    [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
+    [ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d 0755
     install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
 fi
 
@@ -483,8 +428,8 @@ case $HOST in
     suse)
 	if [ -z "$RPM" ]; then
 	    if [ $configure -eq 0 ]; then
-		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-up.d/
-		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d/
+		make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-up.d 0755
+		make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-down.d 0755
 	    fi
 
 	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-up.d/shorewall 0544
@@ -518,17 +463,17 @@ if [ -z "$DESTDIR" ]; then
 	if [ $HOST = debian ]; then
 	    if [ -n "$SERVICEDIR" ]; then
 		if systemctl enable ${PRODUCT}.service; then
-                    echo "Shorewall Init will start automatically at boot"
+                    echo "$Product will start automatically at boot"
 		fi
 	    elif mywhich insserv; then
-		if insserv ${INITDIR}/shorewall-init; then
-		    echo "Shorewall Init will start automatically at boot"
+		if insserv ${INITDIR}/$PRODUCT; then
+                    echo "$Product will start automatically at boot"
 		else
 		    cant_autostart
 		fi
 	    elif mywhich update-rc.d ; then
 		if update-rc.d $PRODUCT enable; then
-		    echo "$PRODUCT will start automatically at boot"
+                    echo "$Product will start automatically at boot"
 		    echo "Set startup=1 in ${CONFDIR}/default/$PRODUCT to enable"
 		else
 		    cant_autostart
@@ -549,31 +494,31 @@ if [ -z "$DESTDIR" ]; then
 	    /bin/true
 	else
 	    if [ -n "$SERVICEDIR" ]; then
-		if systemctl enable shorewall-init.service; then
-		    echo "Shorewall Init will start automatically at boot"
+		if systemctl enable ${PRODUCT}.service; then
+		    echo "$Product will start automatically at boot"
 		fi
 	    elif [ -x ${SBINDIR}/insserv -o -x /usr${SBINDIR}/insserv ]; then
-		if insserv ${INITDIR}/shorewall-init ; then
-		    echo "Shorewall Init will start automatically at boot"
+		if insserv ${INITDIR}/$PRODUCT ; then
+		    echo "$Product will start automatically at boot"
 		else
 		    cant_autostart
 		fi
 	    elif [ -x ${SBINDIR}/chkconfig -o -x /usr${SBINDIR}/chkconfig ]; then
-		if chkconfig --add shorewall-init ; then
-		    echo "Shorewall Init will start automatically in run levels as follows:"
-		    chkconfig --list shorewall-init
+		if chkconfig --add $PRODUCT ; then
+		    echo "$Product will start automatically at boot"
+		    chkconfig --list $PRODUCT
 		else
 		    cant_autostart
 		fi
 	    elif [ -x ${SBINDIR}/rc-update ]; then
-		if rc-update add shorewall-init default; then
-		    echo "Shorewall Init will start automatically at boot"
+		if rc-update add $PRODUCT default; then
+		    echo "$Product will start automatically at boot"
 		else
 		    cant_autostart
 		fi
 	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
 		/etc/init.d/$PRODUCT enable
-		if /etc/init.d/shorewall-init enabled; then
+		if /etc/init.d/$PRODUCT enabled; then
 		    echo "$Product will start automatically at boot"
 		else
 		    cant_autostart
@@ -587,11 +532,11 @@ else
     if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian -a -z "$SERVICEDIR" ]; then
 	    if [ -n "${DESTDIR}" ]; then
-		mkdir -p ${DESTDIR}/etc/rcS.d
+		make_parent_directory ${DESTDIR}/etc/rcS.d 0755
 	    fi
 
-	    ln -sf ../init.d/shorewall-init ${DESTDIR}${CONFDIR}/rcS.d/S38shorewall-init
-	    echo "Shorewall Init will start automatically at boot"
+	    ln -sf ../init.d/$PRODUCT ${DESTDIR}${CONFDIR}/rcS.d/S38${PRODUCT}
+	    echo "$Product will start automatically at boot"
 	fi
     fi
 fi
@@ -602,8 +547,8 @@ if [ -d ${DESTDIR}/etc/ppp ]; then
     case $HOST in
 	debian|suse)
 	    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
-		mkdir -p ${DESTDIR}/etc/ppp/$directory #SuSE doesn't create the IPv6 directories
-		cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown ${DESTDIR}${CONFDIR}/ppp/$directory/shorewall
+		make_parent_directory ${DESTDIR}/etc/ppp/$directory 0755 #SuSE doesn't create the IPv6 directories
+		cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown ${DESTDIR}${CONFDIR}/ppp/$directory/shorewall
 	    done
 	    ;;
 	redhat)
@@ -614,19 +559,19 @@ if [ -d ${DESTDIR}/etc/ppp ]; then
 		FILE=${DESTDIR}/etc/ppp/$file
 		if [ -f $FILE ]; then
 		    if grep -qF Shorewall-based $FILE ; then
-			cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown $FILE
+			cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
 		    else
 			echo "$FILE already exists -- ppp devices will not be handled"
 			break
 		    fi
 		else
-		    cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown $FILE
+		    cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
 		fi
 	    done
 	    ;;
     esac
 fi
 #
-#  Report Success
+# Report Success
 #
 echo "shorewall Init Version $VERSION Installed"

Shorewall-init/shorewall-init

@@ -33,8 +33,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
     else
 	return 0
     fi
@@ -62,7 +64,7 @@ shorewall_start () {
     local PRODUCT
     local STATEDIR
 
-    echo -n "Initializing \"Shorewall-based firewalls\": "
+    printf "Initializing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
 	    if [ -x ${STATEDIR}/firewall ]; then
@@ -90,7 +92,7 @@ shorewall_stop () {
     local PRODUCT
     local STATEDIR
 
-    echo -n "Clearing \"Shorewall-based firewalls\": "
+    printf "Clearing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
 	    if [ -x ${STATEDIR}/firewall ]; then
@@ -102,7 +104,9 @@ shorewall_stop () {
     if [ -n "$SAVE_IPSETS" ]; then
 	mkdir -p $(dirname "$SAVE_IPSETS")
 	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	else
+	    rm -f "${SAVE_IPSETS}.tmp"
 	fi
     fi
 

Shorewall-init/uninstall.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall
+# Script to back uninstall Shoreline Firewall Init
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
@@ -26,62 +26,34 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx  #The Build script inserts the actual version
+VERSION=xxx # The Build script inserts the actual version
 PRODUCT=shorewall-init
 Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <shorewallrc file> ]"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
     exit $1
 }
 
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-remove_file() # $1 = file to restore
-{
-    if [ -f $1 -o -L $1 ] ; then
-	rm -f $1
-	echo "$1 Removed"
-    fi
-}
-
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
+#
+# Source common functions
+#
+. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
+#
+# Parse the run line
+#
 finished=0
 configure=1
 
@@ -118,17 +90,17 @@ while [ $finished -eq 0 ]; do
 	    ;;
     esac
 done
+
 #
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-	. ./shorewallrc
+        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
     elif [ -f ~/.shorewallrc ]; then
-	. ~/.shorewallrc || exit 1
-	file=./.shorewallrc
+        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	. /usr/share/shorewall/shorewallrc
+        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -138,72 +110,72 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file
+	    file=./$file || exit 1
 	    ;;
     esac
 
-    . $file || exit 1
+    . $file || fatal_error "Can not load the RC file: $file"
 else
     usage 1
 fi
 
-if [ -f ${SHAREDIR}/shorewall-init/version ]; then
-    INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall-init/version)"
+if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: Shorewall Init Version $INSTALLED_VERSION is installed"
+	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: Shorewall Init Version $VERSION is not installed"
+    echo "WARNING: $Product Version $VERSION is not installed"
     VERSION=""
 fi
 
-[ -n "${LIBEXEC:=${SHAREDIR}}" ]
-
-echo "Uninstalling Shorewall Init $VERSION"
+echo "Uninstalling $Product $VERSION"
 
 [ -n "$SANDBOX" ] && configure=0
 
-INITSCRIPT=${CONFDIR}/init.d/shorewall-init
+[ -n "${LIBEXEC:=${SHAREDIR}}" ]
 
-if [ -f "$INITSCRIPT" ]; then
+remove_file  ${SBINDIR}/$PRODUCT
+
+FIREWALL=${CONFDIR}/init.d/$PRODUCT
+
+if [ -f "$FIREWALL" ]; then
     if [ $configure -eq 1 ]; then
-	if [ $HOST = openwrt ]; then
-	    if /etc/init.d/shorewall-init enabled; then
-		/etc/init.d/shorewall-init disable
+	if [ $HOST = openwrt ] ; then
+	    if /etc/init.d/$PRODUCT enabled; then
+		/etc/init.d/$PRODUCT disable
 	    fi
-	elif mywhich updaterc.d ; then
-	    updaterc.d shorewall-init remove
 	elif mywhich insserv ; then
-            insserv -r $INITSCRIPT
+            insserv -r $FIREWALL
+	elif mywhich update-rc.d ; then
+	    update-rc.d ${PRODUCT} remove
 	elif mywhich chkconfig ; then
-	    chkconfig --del $(basename $INITSCRIPT)
+	    chkconfig --del $(basename $FIREWALL)
 	fi
     fi
 
-    remove_file $INITSCRIPT
+    remove_file $FIREWALL
 fi
 
-if [ -z "${SERVICEDIR}" ]; then
-    SERVICEDIR="$SYSTEMD"
-fi
+[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
 
 if [ -n "$SERVICEDIR" ]; then
-    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
-    rm -f $SERVICEDIR/shorewall-init.service
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
+    remove_file $SERVICEDIR/${PRODUCT}.service
 fi
 
 if [ $HOST = openwrt ]; then
-    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
 else
-    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
 fi
 
-remove_file ${CONFDIR}/default/shorewall-init
-remove_file ${CONFDIR}/sysconfig/shorewall-init
+remove_file ${CONFDIR}/default/$PRODUCT
+remove_file ${CONFDIR}/sysconfig/$PRODUCT
 
 remove_file ${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall
 
@@ -228,10 +200,11 @@ if [ -d ${CONFDIR}/ppp ]; then
     done
 fi
 
-rm -f  ${SBINDIR}/shorewall-init
-rm -rf ${SHAREDIR}/shorewall-init
-rm -rf ${LIBEXECDIR}/shorewall-init
-
-echo "Shorewall Init Uninstalled"
-
+remove_directory ${SHAREDIR}/$PRODUCT
+remove_directory ${LIBEXECDIR}/$PRODUCT
+remove_file  ${CONFDIR}/logrotate.d/$PRODUCT
 
+#
+# Report Success
+#
+echo "$Product $VERSION Uninstalled"

Shorewall-lite/Makefile

@@ -1,18 +0,0 @@
-# Shorewall Lite Makefile to restart if firewall script is newer than last restart
-VARDIR=$(shell /sbin/shorewall-lite show vardir)
-SHAREDIR=/usr/share/shorewall-lite
-RESTOREFILE?=.restore
-
-all: $(VARDIR)/$(RESTOREFILE)
-
-$(VARDIR)/$(RESTOREFILE): $(VARDIR)/firewall
-	@/sbin/shorewall-lite -q save >/dev/null; \
-	if \
-	    /sbin/shorewall-lite -q restart >/dev/null 2>&1; \
-	then \
-	    /sbin/shorewall-lite -q save >/dev/null; \
-	else \
-	    /sbin/shorewall-lite -q restart 2>&1 | tail >&2; exit 1; \
-	fi
-
-# EOF

Shorewall-lite/default.debian.systemd

@@ -0,0 +1,26 @@
+#
+# Global start/restart/reload/stop options
+#
+OPTIONS=""
+
+#
+# Start options
+#
+STARTOPTIONS=""
+
+#
+# Restart options
+#
+RESTARTOPTIONS=""
+
+#
+# Reload options
+#
+RELOADOPTIONS=""
+
+#
+# Stop options
+#
+STOPOPTIONS=""
+
+# EOF

Shorewall-lite/default.debian.sysvinit

@@ -1,5 +1,5 @@
 # prevent startup with default configuration
-# set the following varible to 1 in order to allow Shorewall-lite to start
+# set the following variable to 1 in order to allow Shorewall-lite to start
 
 startup=0
 
@@ -16,7 +16,7 @@ startup=0
 #    wait_interface=
 
 #
-# Startup options
+# Global start/restart/reload/stop options
 #
 OPTIONS=""
 
@@ -30,6 +30,16 @@ STARTOPTIONS=""
 #
 RESTARTOPTIONS=""
 
+#
+# Reload options
+#
+RELOADOPTIONS=""
+
+#
+# Stop options
+#
+STOPOPTIONS=""
+
 #
 # Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf
 #

Shorewall-lite/init.debian.sh

@@ -13,7 +13,7 @@
 
 . /lib/lsb/init-functions
 
-SRWL=/sbin/shorewall-lite
+SRWL='/sbin/shorewall -l'
 SRWL_OPTS="-tvv"
 test -n ${INITLOG:=/var/log/shorewall-lite-init.log}
 
@@ -85,7 +85,7 @@ fi
 
 # start the firewall
 shorewall_start () {
-  echo -n "Starting \"Shorewall firewall\": "
+  printf "Starting \"Shorewall firewall\": "
   $SRWL $SRWL_OPTS start $STARTOPTIONS >> $INITLOG 2>&1 && echo "done." || echo_notdone
   return 0
 }
@@ -93,10 +93,10 @@ shorewall_start () {
 # stop the firewall
 shorewall_stop () {
   if [ "$SAFESTOP" = 1 ]; then
-      echo -n "Stopping \"Shorewall Lite firewall\": "
+      printf "Stopping \"Shorewall Lite firewall\": "
       $SRWL $SRWL_OPTS stop >> $INITLOG 2>&1 && echo "done." || echo_notdone
   else
-      echo -n "Clearing all \"Shorewall Lite firewall\" rules: "
+      printf "Clearing all \"Shorewall Lite firewall\" rules: "
       $SRWL $SRWL_OPTS clear >> $INITLOG 2>&1 && echo "done." || echo_notdone
   fi
   return 0
@@ -104,14 +104,14 @@ shorewall_stop () {
 
 # restart the firewall
 shorewall_restart () {
-  echo -n "Restarting \"Shorewall firewall\": "
+  printf "Restarting \"Shorewall firewall\": "
   $SRWL $SRWL_OPTS restart $RESTARTOPTIONS >> $INITLOG 2>&1 && echo "done." || echo_notdone
   return 0
 }
 
 # refresh the firewall
 shorewall_refresh () {
-  echo -n "Refreshing \"Shorewall firewall\": "
+  printf "Refreshing \"Shorewall firewall\": "
   $SRWL $SRWL_OPTS refresh >> $INITLOG 2>&1 && echo "done." || echo_notdone
   return 0
 }

Shorewall-lite/init.fedora.sh

@@ -25,7 +25,7 @@
 #
 . /usr/share/shorewall/shorewallrc
 
-prog="shorewall-lite"
+prog="shorewall -l"
 shorewall="${SBINDIR}/$prog"
 logger="logger -i -t $prog"
 lockfile="/var/lock/subsys/$prog"
@@ -38,7 +38,7 @@ if [ -f ${SYSCONFDIR}/$prog ]; then
 fi
 
 start() {
-    echo -n $"Starting Shorewall: "
+    printf $"Starting Shorewall: "
     $shorewall $OPTIONS start $STARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
@@ -52,7 +52,7 @@ start() {
 }
 
 stop() {
-    echo -n $"Stopping Shorewall: "
+    printf $"Stopping Shorewall: "
     $shorewall $OPTIONS stop 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
@@ -68,7 +68,7 @@ stop() {
 restart() {
 # Note that we don't simply stop and start since shorewall has a built in
 # restart which stops the firewall if running and then starts it.
-    echo -n $"Restarting Shorewall: "
+    printf $"Restarting Shorewall: "
     $shorewall $OPTIONS restart $RESTARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then

Shorewall-lite/init.openwrt.sh

@@ -69,7 +69,7 @@ SHOREWALL_INIT_SCRIPT=1
 command="$action"
 
 start() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STARTOPTIONS
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $STARTOPTIONS
 }
 
 boot() {
@@ -78,17 +78,17 @@ boot() {
 }
 
 restart() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RESTARTOPTIONS
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $RESTARTOPTIONS
 }
 
 reload() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RELOADOPTION
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $RELOADOPTION
 }
 
 stop() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STOPOPTIONS
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $STOPOPTIONS
 }
 
 status() {
-	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $@
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $@
 }

Shorewall-lite/install.sh

@@ -22,62 +22,19 @@
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 
-VERSION=xxx #The Build script inserts the actual version
+VERSION=xxx # The Build script inserts the actual version
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <configuration-file> ]"
-    echo "       $ME -v"
-    echo "       $ME -h"
-    echo "       $ME -n"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
     exit $1
 }
 
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    echo $dir/$1
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-cant_autostart()
-{
-    echo
-    echo  "WARNING: Unable to configure $Product to start automatically at boot" >&2
-}
-
-delete_file() # $1 = file to delete
-{
-    rm -f $1
-}
-
 install_file() # $1 = source $2 = target $3 = mode
 {
     if cp -f $1 $2; then
@@ -96,25 +53,12 @@ install_file() # $1 = source $2 = target $3 = mode
     exit 1
 }
 
-make_directory() # $1 = directory , $2 = mode
-{
-    mkdir -p $1
-    chmod 755 $1
-    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
-
-}
-
-require()
-{
-    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
-}
-
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-if [ -f shorewall-lite ]; then
+if [ -f shorewall-lite.service ]; then
     PRODUCT=shorewall-lite
     Product="Shorewall Lite"
 else
@@ -122,6 +66,11 @@ else
     Product="Shorewall6 Lite"
 fi
 
+#
+# Source common functions
+#
+. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
 #
 # Parse the run line
 #
@@ -168,12 +117,14 @@ done
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-	. ./shorewallrc || exit 1
 	file=./shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f ~/.shorewallrc ]; then
-	. ~/.shorewallrc
+	file=~/.shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	. /usr/share/shorewall/shorewallrc
+	file=/usr/share/shorewall/shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -183,11 +134,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file
+	    file=./$file || exit 1
 	    ;;
     esac
 
-    . $file
+    . $file || fatal_error "Can not load the RC file: $file"
 else
     usage 1
 fi
@@ -318,8 +269,7 @@ case "$HOST" in
     linux)
 	;;
     *)
-	echo "ERROR: Unknown HOST \"$HOST\"" >&2
-	exit 1;
+	fatal_error "ERROR: Unknown HOST \"$HOST\""
 	;;
 esac
 
@@ -331,8 +281,7 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
 
-    make_directory ${DESTDIR}${SBINDIR} 755
-    make_directory ${DESTDIR}${INITDIR} 755
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
 
 else
     if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
@@ -362,9 +311,9 @@ else
 fi
 
 #
-# Check for ${SBINDIR}/$PRODUCT
+# Check for ${SHAREDIR}/$PRODUCT/version
 #
-if [ -f ${DESTDIR}${SBINDIR}/$PRODUCT ]; then
+if [ -f ${DESTDIR}${SHAREDIR}/$PRODUCT/version ]; then
     first_install=""
 else
     first_install="Yes"
@@ -372,27 +321,20 @@ fi
 
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
-install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
-[ -n "${INITFILE}" ] && make_directory ${DESTDIR}${INITDIR} 755
-
-echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
+[ -n "${INITFILE}" ] && make_parent_directory ${DESTDIR}${INITDIR} 0755
 
 #
 # Create ${CONFDIR}/$PRODUCT, /usr/share/$PRODUCT and /var/lib/$PRODUCT if needed
 #
-mkdir -p ${DESTDIR}${CONFDIR}/$PRODUCT
-mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT
-mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
-mkdir -p ${DESTDIR}${VARDIR}
-
-chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
-chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
+make_parent_directory ${DESTDIR}${CONFDIR}/$PRODUCT 0755
+make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
+make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
+make_parent_directory ${DESTDIR}${SBINDIR} 0755
+make_parent_directory ${DESTDIR}${VARDIR} 0755
 
 if [ -n "$DESTDIR" ]; then
-    mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
-    chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
-    mkdir -p ${DESTDIR}${INITDIR}
-    chmod 755 ${DESTDIR}${INITDIR}
+    make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
 fi
 
 if [ -n "$INITFILE" ]; then
@@ -413,9 +355,9 @@ if [ -z "${SERVICEDIR}" ]; then
 fi
 
 if [ -n "$SERVICEDIR" ]; then
-    mkdir -p ${DESTDIR}${SERVICEDIR}
+    make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 644
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
@@ -433,15 +375,6 @@ elif [ $HOST = gentoo ]; then
     # Adjust SUBSYSLOCK path (see https://bugs.gentoo.org/show_bug.cgi?id=459316)
     perl -p -w -i -e "s|^SUBSYSLOCK=.*|SUBSYSLOCK=/run/lock/$PRODUCT|;" ${DESTDIR}${CONFDIR}/$PRODUCT/$PRODUCT.conf
 fi
-
-#
-# Install the  Makefile
-#
-install_file Makefile ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile 0600
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
-[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
-echo "Makefile installed as ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile"
-
 #
 # Install the default config path file
 #
@@ -453,8 +386,14 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 #
 for f in lib.* ; do
     if [ -f $f ]; then
-	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-	echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+        case $f in
+            *installer)
+                ;;
+            *)
+                install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+                echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+                ;;
+        esac
     fi
 done
 
@@ -482,12 +421,12 @@ if [ -f modules ]; then
 fi
 
 if [ -f helpers ]; then
-    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 600
+    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 0600
     echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
 fi
 
 for f in modules.*; do
-    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 644
+    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
     echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
 done
 
@@ -498,17 +437,19 @@ done
 if [ -d manpages -a -n "$MANDIR" ]; then
     cd manpages
 
-    mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
+    make_parent_directory ${DESTDIR}${MANDIR}/man5 0755
 
     for f in *.5; do
 	gzip -c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 644
+	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 0644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
+    make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
+
     for f in *.8; do
 	gzip -c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
@@ -518,7 +459,7 @@ if [ -d manpages -a -n "$MANDIR" ]; then
 fi
 
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 644
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -526,7 +467,7 @@ fi
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}${SHAREDIR}/$PRODUCT/version
-chmod 644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
+chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 #
 # Remove and create the symbolic link to the init script
 #
@@ -540,14 +481,16 @@ delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/lib.common
 delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/lib.cli
 delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/wait4ifup
 
+#
+#  Creatae the symbolic link for the CLI
+#
+ln -sf shorewall ${DESTDIR}${SBINDIR}/${PRODUCT}
+
 #
 # Note -- not all packages will have the SYSCONFFILE so we need to check for its existance here
 #
 if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
-    if [ ${DESTDIR} ]; then
-	mkdir -p ${DESTDIR}${SYSCONFDIR}
-	chmod 755 ${DESTDIR}${SYSCONFDIR}
-    fi
+    [ ${DESTDIR} ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
 
     install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
     echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
@@ -555,7 +498,6 @@ fi
 
 if [ ${SHAREDIR} != /usr/share ]; then
     eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
@@ -616,6 +558,6 @@ if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${
 fi
 
 #
-#  Report Success
+# Report Success
 #
 echo "$Product Version $VERSION Installed"

Shorewall-lite/shorecap

@@ -28,7 +28,7 @@
 #
 #   On the target system (the system where the firewall program is to run):
 #
-#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] [ MODULE_SUFFIX="<module suffix list>" ] shorecap > capabilities
+#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] shorecap > capabilities
 #
 #    Now move the capabilities file to the compilation system. The file must
 #    be placed in a directory on the CONFIG_PATH to be used when compiling firewalls
@@ -38,26 +38,26 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
-#        MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not
 #    require Shorewall to be installed.
 
 
-g_program=shorewall-lite
+PRODUCT=shorewall-lite
 
 #
 # This is modified by the installer when ${SHAREDIR} != /usr/share
 #
 . /usr/share/shorewall/shorewallrc
 
-g_sharedir="$SHAREDIR"/shorewall-lite
-g_confdir="$CONFDIR"/shorewall-lite
-g_readrc=1
+g_basedir=${SHAREDIR}/shorewall
 
 . ${SHAREDIR}/shorewall/lib.cli
-. /usr/share/shorewall-lite/configpath
+
+setup_product_environment
+
+. ${SHAREDIR}/shorewall-lite/configpath
 
 [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 

Shorewall-lite/shorewall-lite

@@ -1,42 +0,0 @@
-#!/bin/sh
-#
-#     Shorewall Lite Packet Filtering Firewall Control Program - V4.5
-#
-#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014 -
-#         Tom Eastep (teastep@shorewall.net)
-#
-#	Shorewall documentation is available at http://www.shorewall.net
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-#       For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
-#
-################################################################################################
-PRODUCT=shorewall-lite
-
-#
-# This is modified by the installer when ${SHAREDIR} != /usr/share
-#
-. /usr/share/shorewall/shorewallrc
-
-g_program=$PRODUCT
-g_sharedir="$SHAREDIR"/shorewall-lite
-g_confdir="$CONFDIR"/shorewall-lite
-g_readrc=1
-
-. ${SHAREDIR}/shorewall/lib.cli
-
-shorewall_cli $@

Shorewall-lite/shorewall-lite.service.debian

@@ -16,7 +16,7 @@ RemainAfterExit=yes
 EnvironmentFile=-/etc/default/shorewall-lite
 StandardOutput=syslog
 ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall-lite $OPTIONS stop
+ExecStop=/sbin/shorewall-lite $OPTIONS clear
 ExecReload=/sbin/shorewall-lite $OPTIONS reload $RELOADOPTIONS
 
 [Install]

Shorewall-lite/uninstall.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall
+# Script to back uninstall Shoreline Firewall Lite
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
@@ -26,9 +26,7 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx  #The Build script inserts the actual version
-PRODUCT=shorewall-lite
-Product="Shorewall Lite"
+VERSION=xxx # The Build script inserts the actual version
 
 usage() # $1 = exit status
 {
@@ -41,46 +39,27 @@ usage() # $1 = exit status
     exit $1
 }
 
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
 
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
+if [ -f shorewall-lite.service ]; then
+    PRODUCT=shorewall-lite
+    Product="Shorewall Lite"
+else
+    PRODUCT=shorewall6-lite
+    Product="Shorewall6 Lite"
+fi
 
-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-remove_file() # $1 = file to restore
-{
-    if [ -f $1 -o -L $1 ] ; then
-	rm -f $1
-	echo "$1 Removed"
-    fi
-}
+#
+# Source common functions
+#
+. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
 
+#
+# Parse the run line
+#
 finished=0
 configure=1
 
@@ -97,7 +76,7 @@ while [ $finished -eq 0 ]; do
 			usage 0
 			;;
 		    v)
-			echo "$Product Firewall Installer Version $VERSION"
+			echo "$Product Firewall Uninstaller Version $VERSION"
 			exit 0
 			;;
 		    n*)
@@ -117,17 +96,17 @@ while [ $finished -eq 0 ]; do
 	    ;;
     esac
 done
+
 #
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-	. ./shorewallrc
+        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
     elif [ -f ~/.shorewallrc ]; then
-	. ~/.shorewallrc || exit 1
-	file=./.shorewallrc
+        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	. /usr/share/shorewall/shorewallrc
+        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -137,46 +116,50 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file
+	    file=./$file || exit 1
 	    ;;
     esac
 
-    . $file
+    . $file || fatal_error "Can not load the RC file: $file"
 else
     usage 1
 fi
 
-if [ -f ${SHAREDIR}/shorewall-lite/version ]; then
-    INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall-lite/version)"
+if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: Shorewall Lite Version $INSTALLED_VERSION is installed"
+	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: Shorewall Lite Version $VERSION is not installed"
+    echo "WARNING: $Product Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling Shorewall Lite $VERSION"
+echo "Uninstalling $Product $VERSION"
 
 [ -n "$SANDBOX" ] && configure=0
 
 if [ $configure -eq 1 ]; then
     if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
-	shorewall-lite clear
+	${SBINDIR}/$PRODUCT clear
+    elif qt ip6tables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall6 ]; then
+	${SBINDIR}/$PRODUCT clear
     fi
 fi
 
-if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
+remove_file ${SBINDIR}/$PRODUCT
+
+if [ -L ${SHAREDIR}/$PRODUCT/init ]; then
     if [ $HOST = openwrt ]; then
-	if [ $configure -eq 1 ] && /etc/init.d/shorewall-lite enabled; then
-	    /etc/init.d/shorewall-lite disable
+	if [ $configure -eq 1 ] && /etc/init.d/$PRODUCT enabled; then
+	    /etc/init.d/$PRODUCT disable
 	fi
 	
-	FIREWALL=$(readlink ${SHAREDIR}/shorewall-lite/init)
+	FIREWALL=$(readlink ${SHAREDIR}/$PRODUCT/init)
     else
-	FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
+	FIREWALL=$(readlink -m -q ${SHAREDIR}/$PRODUCT/init)
     fi
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
@@ -184,10 +167,10 @@ fi
 
 if [ -f "$FIREWALL" ]; then
     if [ $configure -eq 1 ]; then
-	if mywhich updaterc.d ; then
-	    updaterc.d shorewall-lite remove
-	elif mywhich insserv ; then
+	if mywhich insserv ; then
             insserv -r $FIREWALL
+	elif mywhich update-rc.d ; then
+	    update-rc.d ${PRODUCT} remove
 	elif mywhich chkconfig ; then
 	    chkconfig --del $(basename $FIREWALL)
 	fi
@@ -196,26 +179,29 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
+[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
 
 if [ -n "$SERVICEDIR" ]; then
-    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
-    rm -f $SERVICEDIR/shorewall-lite.service
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
+    remove_file $SERVICEDIR/${PRODUCT}.service
 fi
 
-rm -f ${SBINDIR}/shorewall-lite
+remove_directory ${CONFDIR}/$PRODUCT
+remove_directory ${VARDIR}
+remove_directory ${SHAREDIR}/$PRODUCT
+remove_directory ${LIBEXECDIR}/$PRODUCT
+remove_file  ${CONFDIR}/logrotate.d/$PRODUCT
 
-rm -rf ${CONFDIR}/shorewall-lite
-rm -rf ${VARDIR}
-rm -rf ${SHAREDIR}/shorewall-lite
-rm -rf ${LIBEXECDIR}/shorewall-lite
-rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
-rm -f  ${SYSCONFDIR}/shorewall-lite
+if [ -n "$SYSCONFDIR" ]; then
+    [ -n "$SYSCONFFILE" ] && remove_file ${SYSCONFDIR}/${PRODUCT}
+fi
 
 if [ -n "${MANDIR}" ]; then
-    rm -f ${MANDIR}/man5/shorewall-lite*
-    rm -f ${MANDIR}/man8/shorewall-lite*
+    remove_file_with_wildcard ${MANDIR}/man5/${PRODUCT}\*
+    remove_file_with_wildcard ${MANDIR}/man8/${PRODUCT}\*
 fi
 
-echo "Shorewall Lite Uninstalled"
-
+#
+# Report Success
+#
+echo "$Product $VERSION Uninstalled"

Shorewall/Actions/action.A_AllowICMPs.deprecated

@@ -0,0 +1,9 @@
+#
+# Shorewall6 -- /usr/share/shorewall/action.A_AllowICMPs
+#
+# This action A_ACCEPTs needed ICMP types
+#
+###############################################################################
+#ACTION		SOURCE		DEST	PROTO		DPORT
+
+AllowICMPs(A_ACCEPT)

Shorewall/Actions/action.A_Drop.deprecated

@@ -12,6 +12,8 @@
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 #
+?require AUDIT_TARGET
+?warning "You are using the deprecated A_Drop default action. Please see http://www.shorewall.net/Actions.html
 ###############################################################################
 #ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
 #
@@ -30,9 +32,10 @@ Auth(A_DROP)
 #
 A_AllowICMPs	-	-	icmp
 #
-# Don't log broadcasts
+# Don't log broadcasts and multicasts
 #
 dropBcast(audit)
+dropMcast(audit)
 #
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log.

Shorewall/Actions/action.A_REJECT

@@ -22,8 +22,9 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-# A_REJECTWITH[([<option>])] where <option> is a valid REJECT option.#
+# A_REJECT[([<option>])] where <option> is a valid REJECT option.#
 ###############################################################################
+?require AUDIT_TARGET
 
 DEFAULTS -
 

Shorewall/Actions/action.A_REJECT!

@@ -22,8 +22,9 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-# A_REJECTWITH[([<option>])] where <option> is a valid REJECT option.#
+# A_REJECT[([<option>])] where <option> is a valid REJECT option.#
 ###############################################################################
+?require AUDIT_TARGET
 
 DEFAULTS -
 

Shorewall/Actions/action.A_Reject.deprecated

@@ -11,6 +11,8 @@
 #    internet operation are always ACCEPTed.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
+?require AUDIT_TARGET
+?warning "You are using the deprecated A_REJECT default action. Please see http://www.shorewall.net/Actions.html
 ###############################################################################
 #ACTION		SOURCE	DEST	PROTO
 #
@@ -25,10 +27,11 @@ COUNT
 #
 A_AllowICMPs	-	-	icmp
 #
-# Drop Broadcasts so they don't clutter up the log
-# (broadcasts must *not* be rejected).
+# Drop Broadcasts and multicasts so they don't clutter up the log
+# (these must *not* be rejected).
 #
 dropBcast(audit)
+dropMcast(audit)
 #
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log (these ICMPs cannot be

Shorewall/Actions/action.AllowICMPs

@@ -0,0 +1,45 @@
+#
+# Shorewall -- /usr/share/shorewall/action.AllowICMPs
+#
+# This action ACCEPTs needed ICMP types.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+DEFAULTS ACCEPT
+
+?if __IPV4
+    @1	-	-	icmp	fragmentation-needed	{comment="Needed ICMP types"}
+    @1	-	-	icmp	time-exceeded		{comment="Needed ICMP types"}
+?else
+?COMMENT Needed ICMP types (RFC4890)
+
+    @1	-		-	ipv6-icmp	destination-unreachable
+    @1	-		-	ipv6-icmp	packet-too-big
+    @1	-		-	ipv6-icmp	time-exceeded
+    @1	-		-	ipv6-icmp	parameter-problem
+
+# The following should have a ttl of 255 and must be allowed to transit a bridge
+    @1	-		-	ipv6-icmp	router-solicitation
+    @1	-		-	ipv6-icmp	router-advertisement
+    @1	-		-	ipv6-icmp	neighbour-solicitation
+    @1	-		-	ipv6-icmp	neighbour-advertisement
+    @1	-		-	ipv6-icmp	137	# Redirect
+    @1	-		-	ipv6-icmp	141	# Inverse neighbour discovery solicitation
+    @1	-		-	ipv6-icmp	142	# Inverse neighbour discovery advertisement
+
+# The following should have a link local source address and must be allowed to transit a bridge
+    @1	fe80::/10	-	ipv6-icmp	130	# Listener query
+    @1	fe80::/10	-	ipv6-icmp	131	# Listener report
+    @1	fe80::/10	-	ipv6-icmp	132	# Listener done
+    @1	fe80::/10	-	ipv6-icmp	143	# Listener report v2
+
+# The following should be received with a ttl of 255 and must be allowed to transit a bridge
+    @1	-		-	ipv6-icmp	148	# Certificate path solicitation
+    @1	-		-	ipv6-icmp	149	# Certificate path advertisement
+
+# The following should have a link local source address and a ttl of 1 and must be allowed to transit abridge
+    @1	fe80::/10	-	ipv6-icmp	151	# Multicast router advertisement
+    @1	fe80::/10	-	ipv6-icmp	152	# Multicast router solicitation
+    @1	fe80::/10	-	ipv6-icmp	153	# Multicast router termination
+?endif

Shorewall/Actions/action.BLACKLIST

@@ -0,0 +1,50 @@
+#
+# Shorewall - /usr/share/shorewall/action.BLACKLIST
+#
+# This action:
+#
+#   - Adds the sender to the dynamic blacklist ipset
+#   - Optionally acts on the packet (default is DROP)
+#
+# Parameters:
+#
+# 1 - Action to take after adding the packet. Default is DROP.
+#     Pass -- if you don't want to take any action.
+# 2 - Timeout for ipset entry. Default is the timeout specified in
+#     DYNAMIC_BLACKLIST or the one specified when the ipset was created.
+#
+###############################################################################
+# Note -- This action is defined with the 'section' option, so the first
+#         parameter is always the section name. That means that in the
+#         following text, the first parameter passed in the rule is actually
+#         @2.
+###############################################################################
+?if $1 eq 'BLACKLIST'
+   ?if $BLACKLIST_LOG_LEVEL
+       blacklog
+   ?else
+       $BLACKLIST_DISPOSITION
+   ?endif
+?else
+   ?if ! "$SW_DBL_IPSET"
+   ?   error The BLACKLIST action may only be used with ipset-based dynamic blacklisting
+   ?endif
+
+   DEFAULTS -,DROP,-
+   #
+   # Add to the blacklist
+   #
+   ?if passed(@3)
+       ADD($SW_DBL_IPSET:src:@3)
+   ?elsif $SW_DBL_TIMEOUT
+       ADD($SW_DBL_IPSET:src:$SW_DBL_TIMEOUT)
+   ?else
+       ADD($SW_DBL_IPSET:src)
+   ?endif
+   #
+   # Dispose of the packet if asked
+   #
+   ?if passed(@2)
+      @2
+   ?endif
+?endif

Shorewall/Actions/action.Broadcast

@@ -0,0 +1,65 @@
+#
+# Shorewall -- /usr/share/shorewall/action.Broadcast
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Broadcast[([<action>|[,{audit|-}])]
+#
+# Default action is DROP
+#
+###############################################################################
+
+DEFAULTS DROP,-
+
+?if __ADDRTYPE
+    @1	-	-	-	;; -m addrtype --dst-type BROADCAST
+    @1	-	-	-	;; -m addrtype --dst-type ANYCAST
+?else
+    ?begin perl;
+
+    use strict;
+    use Shorewall::IPAddrs;
+    use Shorewall::Config;
+    use Shorewall::Chains;
+
+    my ( $action, $audit ) = get_action_params( 2 );
+    my $chainref           = get_action_chain;
+    my ( $level, $tag )    = get_action_logging;
+
+    fatal_error "Invalid parameter to action Broadcast" if supplied $audit && $audit ne 'audit';
+
+    my $target             = require_audit ( $action , $audit );
+
+    if ( $family == F_IPV4 ) {
+        add_commands $chainref, 'for address in $ALL_BCASTS; do';
+    } elsif ($family == F_IPV6 ) {
+        add_commands $chainref, 'for address in $ALL_ACASTS; do';
+    }
+
+    incr_cmd_level $chainref;
+    log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
+    add_jump $chainref, $target, 0, "-d \$address ";
+    decr_cmd_level $chainref;
+    add_commands $chainref, 'done';
+
+    1;
+
+    ?end perl;
+?endif

Shorewall/Actions/action.Drop.deprecated

@@ -1,7 +1,7 @@
 #
 # Shorewall -- /usr/share/shorewall/action.Drop
 #
-# The default DROP common rules
+# The former default DROP common rules. Use of this action is now deprecated
 #
 # This action is invoked before a DROP policy is enforced. The purpose
 # of the action is:
@@ -20,7 +20,7 @@
 #     depending on the setting of the first parameter.
 # 4 - Action to take with required ICMP packets. Default is ACCEPT or
 #     A_ACCEPT depending on the first parameter.
-# 5 - Action to take with late UDP replies (UDP source port 53). Default
+# 5 - Action to take with late DNS replies (UDP source port 53). Default
 #     is DROP or A_DROP depending on the first parameter.
 # 6 - Action to take with UPnP packets. Default is DROP or A_DROP
 #     depending on the first parameter.
@@ -28,6 +28,7 @@
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 #
 ###############################################################################
+?warning "You are using the deprecated Drop default action. Please see http://www.shorewall.net/Actions.html#Default"
 
 ?if passed(@1)
     ?if @1 eq 'audit'
@@ -58,9 +59,10 @@ Auth(@2)
 #
 AllowICMPs(@4)	-	-	icmp
 #
-# Don't log broadcasts
+# Don't log broadcasts or multicasts
 #
 Broadcast(DROP,@1)
+Multicast(DROP,@1)
 #
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log.

Shorewall/Actions/action.DropDNSrep

@@ -0,0 +1,10 @@
+#
+# Shorewall -- /usr/share/shorewall/action.DropDNSrep
+#
+# This macro silently drops DNS UDP replies that are in the New state
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+DEFAULTS DROP
+@1	-	-	udp	-	53 { comment="Late DNS Replies" }

Shorewall/Actions/action.FIN

@@ -0,0 +1,33 @@
+#
+# Shorewall -- /usr/share/shorewall/action.FIN
+#
+# FIN Action
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# FIN[([<action>])]
+#
+# Default action is ACCEPT
+#
+###############################################################################
+
+DEFAULTS ACCEPT,-
+
+@1	 -	-	;;+ -p 6 --tcp-flags ACK,FIN,PSH ACK,FIN,PSH

Shorewall/Actions/action.GlusterFS

@@ -13,9 +13,9 @@
 DEFAULTS 2,0
 
 ?if @1 !~ /^\d+/ || ! @1 || @1 > 1024
-    ?error Invalid value for Bricks (@1)
+    ?error Invalid value (@1) for the GlusterFS Bricks argument
 ?elsif @2 !~ /^[01]$/
-    ?error Invalid value for IB (@2)
+    ?error Invalid value (@2) for the GlusterFS IB argument
 ?endif
 
 #ACTION		SOURCE		DEST		PROTO	DPORT

Shorewall/Actions/action.IfEvent

@@ -107,6 +107,11 @@ if ( $command & $REAP_OPT ) {
 
 $duration .= '--rttl ' if $command & $TTL_OPT;
 
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "-m recent --rcheck ${duration}--hitcount $hitcount" );
+    $action = 'ACCEPT';
+}
+
 if ( $command & $RESET_CMD ) {
     require_capability 'MARK_ANYWHERE', '"reset"', 's';
 

Shorewall/Actions/action.Limit

@@ -0,0 +1,70 @@
+#
+# Shorewall -- /usr/share/shorewall/action.Limit
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Limit(<recent-set>,<num-connections>,<timeout>)
+#
+###############################################################################
+
+DEFAULTS -,-,-
+
+?begin perl
+
+use strict;
+use Shorewall::Config;
+use Shorewall::Chains;
+
+my $chainref        = get_action_chain;
+my @param           = get_action_params(3);
+my ( $level, $tag ) = get_action_logging;
+
+@param = split( ',', $tag ), $tag = $param[0] unless supplied( join '', @param );
+
+fatal_error 'Limit rules must include <set name>,<max connections>,<interval> as the log tag or as parameters' unless @param == 3;
+
+my $set   = $param[0];
+
+for ( @param[1,2] ) {
+    fatal_error 'Max connections and interval in Limit rules must be numeric (' . join( ':', 'Limit', $level eq '' ? 'none' : $level, $tag ) . ')' unless /^\d+$/
+}
+
+my $count = $param[1] + 1;
+
+require_capability( 'RECENT_MATCH' , 'Limit rules' , '' );
+
+warning_message "The Limit action is deprecated in favor of per-IP rate limiting using the RATE LIMIT column";
+
+add_irule $chainref, recent => "--name $set --set";
+
+if ( $level ne '' ) {
+    my $xchainref = new_chain 'filter' , "$chainref->{name}%";
+    log_irule_limit( $level, $xchainref, '', 'DROP', [], $tag, 'add' , '' );
+    add_ijump $xchainref, j => 'DROP';
+    add_ijump $chainref,  j => $xchainref, recent => "--name $set --update --seconds $param[2] --hitcount $count";
+} else {
+    add_ijump $chainref, j => 'DROP', recent => "--update --name $set --seconds $param[2] --hitcount $count";
+}
+
+add_ijump $chainref, j => 'ACCEPT';
+
+1;
+
+?end perl

Shorewall/Actions/action.Multicast

@@ -1,5 +1,5 @@
 #
-# Shorewall -- /usr/share/shorewall/action.Broadcast
+# Shorewall -- /usr/share/shorewall/action.Multicast
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -20,7 +20,7 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-# Broadcast[([<action>|-[,{audit|-}])]
+# Multicast[([<action>|-[,{audit|-}])]
 #
 # Default action is DROP
 #
@@ -29,31 +29,28 @@
 DEFAULTS DROP,-
 
 ?if __ADDRTYPE
-@1	-	-	-	;; -m addrtype --dst-type BROADCAST
-@1	-	-	-	;; -m addrtype --dst-type MULTICAST
-@1	-	-	-	;; -m addrtype --dst-type ANYCAST
+    @1	-	-	-	;; -m addrtype --dst-type MULTICAST
 ?else
-?begin perl;
+    ?begin perl;
 
-use Shorewall::IPAddrs;
-use Shorewall::Config;
-use Shorewall::Chains;
+    use strict;
+    use Shorewall::IPAddrs;
+    use Shorewall::Config;
+    use Shorewall::Chains;
 
-my ( $action )         = get_action_params( 1 );
-my $chainref           = get_action_chain;
-my ( $level, $tag )    = get_action_logging;
+    my ( $action, $audit ) = get_action_params( 2 );
+    my $chainref           = get_action_chain;
+    my ( $level, $tag )    = get_action_logging;
 
-add_commands $chainref, 'for address in $ALL_BCASTS; do';
-incr_cmd_level $chainref;
-log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
-add_jump $chainref, $action, 0, "-d \$address ";
-decr_cmd_level $chainref;
-add_commands $chainref, 'done';
+    fatal_error "Invalid parameter to action Multicast" if supplied $audit && $audit ne 'audit';
 
-log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d 224.0.0.0/4 ' if $level ne '';
-add_jump $chainref, $action, 0, '-d 224.0.0.0/4 ';
+    my $target = require_audit ( $action , $audit );
+    my $dest   = ( $family == F_IPV4 ) ? join( ' ', '-d', IPv4_MULTICAST . ' ' ) : join( ' ', '-d', IPv6_MULTICAST . ' ' );
 
-1;
+    log_rule_limit( $level, $chainref, 'Multicast' , $action, '', $tag, 'add', $dest ) if $level ne '';
+    add_jump $chainref, $target, 0, $dest;
 
-?end perl;
+    1;
+
+    ?end perl;
 ?endif

Shorewall/Actions/action.Reject.deprecated

@@ -1,7 +1,7 @@
 #
 # Shorewall -- /usr/share/shorewall/action.Reject
 #
-# The default REJECT action common rules
+# The former default REJECT action common rules. Use of this action is deprecated.
 #
 # This action is invoked before a REJECT policy is enforced. The purpose
 # of the action is:
@@ -20,13 +20,14 @@
 #     depending on the setting of the first parameter.
 # 4 - Action to take with required ICMP packets. Default is ACCEPT or
 #     A_ACCEPT depending on the first parameter.
-# 5 - Action to take with late UDP replies (UDP source port 53). Default
+# 5 - Action to take with late DNS replies (UDP source port 53). Default
 #     is DROP or A_DROP depending on the first parameter.
 # 6 - Action to take with UPnP packets. Default is DROP or A_DROP
 #     depending on the first parameter.
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 ###############################################################################
+?warning "You are using the deprecated Reject default action. Please see http://www.shorewall.net/Actions.html#Default"
 
 ?if passed(@1)
     ?if @1 eq 'audit'
@@ -61,6 +62,7 @@ AllowICMPs(@4)	-	-	icmp
 # (broadcasts must *not* be rejected).
 #
 Broadcast(DROP,@1)
+Multicast(DROP,@1)
 #
 # Drop packets that are in the INVALID state -- these are usually ICMP packets
 # and just confuse people when they appear in the log (these ICMPs cannot be

Shorewall/Actions/action.ResetEvent

@@ -41,6 +41,11 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
 set_action_disposition( $disposition) if supplied $disposition;
 set_action_name_to_caller;
 
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "" );
+    $action = 'ACCEPT';
+}
+
 if ( $destination eq 'dst' ) {
     perl_action_helper( $action, '', '', "-m recent --name $event --remove --rdest" );
 } else {

Shorewall/Actions/action.SetEvent

@@ -37,6 +37,11 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
 set_action_disposition( $disposition) if supplied $disposition;
 set_action_name_to_caller;
 
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "" );
+    $action = 'ACCEPT';
+}
+
 if ( $destination eq 'dst' ) {
     perl_action_helper( $action, '', '', "-m recent --name $event --set --rdest" );
 } else {

Shorewall/Actions/action.allowBcast

@@ -0,0 +1,38 @@
+#
+# Shorewall -- /usr/share/shorewall/action.allowBcast
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# allowBcast[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	Broadcast(A_ACCEPT)
+    ?else
+	?error "Invalid argument (@1) to allowBcast"
+    ?endif
+?else
+    Broadcast(ACCEPT)
+?endif

Shorewall/Actions/action.allowMcast

@@ -0,0 +1,38 @@
+#
+# Shorewall -- /usr/share/shorewall/action.allowMcast
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# allowMcast[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	Multicast(A_ACCEPT)
+    ?else
+	?error "Invalid argument (@1) to allowMcast"
+    ?endif
+?else
+    Multicast(ACCEPT)
+?endif

Shorewall/Actions/action.allowinUPnP

@@ -0,0 +1,40 @@
+#
+# Shorewall -- /usr/share/shorewall/action.allowinUPnP
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# allowinUPnP[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	A_ACCEPT - - 17 1900
+	A_ACCEPT - -  6 49152
+    ?else
+	?error "Invalid argument (@1) to allowinUPnP"
+    ?endif
+?else
+    ACCEPT - - 17 1900
+    ACCEPT - -	6 49152
+?endif

Shorewall/Actions/action.dropBcast

@@ -0,0 +1,39 @@
+#
+# Shorewall -- /usr/share/shorewall/action.dropBcast
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# dropBcast[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	Broadcast(A_DROP)
+    ?else
+	?error "Invalid argument (@1) to dropBcast"
+    ?endif
+?else
+    Broadcast(DROP)
+?endif
+

Shorewall/Actions/action.dropBcasts

@@ -0,0 +1,39 @@
+#
+# Shorewall -- /usr/share/shorewall/action.dropBcasts
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# dropBcasts[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	Broadcast(A_DROP)
+    ?else
+	?error "Invalid argument (@1) to dropBcasts"
+    ?endif
+?else
+    Broadcast(DROP)
+?endif
+

Shorewall/Actions/action.dropMcast

@@ -0,0 +1,38 @@
+#
+# Shorewall -- /usr/share/shorewall/action.dropMcast
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# dropMcast[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	Multicast(A_DROP)
+    ?else
+	?error "Invalid argument (@1) to dropMcast"
+    ?endif
+?else
+    Multicast(DROP)
+?endif

Shorewall/Actions/action.dropNotSyn

@@ -0,0 +1,38 @@
+#
+# Shorewall -- /usr/share/shorewall/action.dropNotSyn
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# dropNotSyn[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	A_DROP {proto=6:!syn}
+    ?else
+	?error "Invalid argument (@1) to dropNotSyn"
+    ?endif
+?else
+    DROP {proto=6:!syn}
+?endif

Shorewall/Actions/action.forwardUPnP

@@ -0,0 +1,43 @@
+#
+# Shorewall -- /usr/share/shorewall/action.forwardUPnP
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# forwardUPnP
+#
+###############################################################################
+
+DEFAULTS -
+
+?begin perl
+
+use strict;
+use Shorewall::Config;
+use Shorewall::Chains;
+
+my $chainref = get_action_chain;
+
+set_optflags( $chainref, DONT_OPTIMIZE );
+
+add_commands( $chainref , '[ -f ${VARDIR}/.forwardUPnP ] && cat ${VARDIR}/.forwardUPnP >&3' );
+
+1;
+
+?end perl

Shorewall/Actions/action.rejNotSyn

@@ -0,0 +1,39 @@
+#
+# Shorewall -- /usr/share/shorewall/action.rejNotSyn
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# rejNotSyn[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	A_REJECT {proto=6:!syn}
+    ?else
+	?error "Invalid argument (@1) to rejNotSyn"
+    ?endif
+?else
+    REJECT(tcp-reset) {proto=6:!syn}
+?endif
+

Shorewall/Macros/macro.AllowICMPs

@@ -1,13 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.AllowICMPs
-#
-# This macro ACCEPTs needed ICMP types.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-?COMMENT Needed ICMP types
-
-DEFAULT ACCEPT
-PARAM	-	-	icmp	fragmentation-needed
-PARAM	-	-	icmp	time-exceeded

Shorewall/Macros/macro.BLACKLIST

@@ -1,13 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.blacklist
-#
-# This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-?if $BLACKLIST_LOGLEVEL
-blacklog
-?else
-$BLACKLIST_DISPOSITION
-?endif

Shorewall/Macros/macro.Drop

@@ -1,49 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.Drop
-#
-# This macro generates the same rules as the Drop default action
-# It is used in place of action.Drop when USE_ACTIONS=No.
-#
-# Example:
-#
-#	Drop	net	all
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-#
-# Don't log 'auth' DROP
-#
-DROP	-	-	tcp	113
-#
-# Drop Broadcasts so they don't clutter up the log
-# (broadcasts must *not* be rejected).
-#
-dropBcast
-#
-# ACCEPT critical ICMP types
-#
-ACCEPT	-	-	icmp	fragmentation-needed
-ACCEPT	-	-	icmp	time-exceeded
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log (these ICMPs cannot be
-# rejected).
-#
-dropInvalid
-#
-# Drop Microsoft noise so that it doesn't clutter up the log.
-#
-DROP	-	-	udp	135,445
-DROP	-	-	udp	137:139
-DROP	-	-	udp	1024:	137
-DROP	-	-	tcp	135,139,445
-DROP	-	-	udp	1900
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-dropNotSyn
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-DROP	-	-	udp	-	53

Shorewall/Macros/macro.DropDNSrep

@@ -1,12 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.DropDNSrep
-#
-# This macro silently drops DNS UDP replies
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-?COMMENT Late DNS Replies
-
-DEFAULT DROP
-PARAM	-	-	udp	-	53

Shorewall/Macros/macro.RDP

@@ -6,4 +6,5 @@
 ###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
+PARAM	-	-	udp	3389
 PARAM	-	-	tcp	3389

Shorewall/Macros/macro.Reject

@@ -1,49 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.Reject
-#
-# This macro generates the same rules as the Reject default action
-# It is used in place of action.Reject when USE_ACTIONS=No.
-#
-# Example:
-#
-#	Reject	loc	fw
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-#
-# Don't log 'auth' REJECT
-#
-REJECT	-	-	tcp	113
-#
-# Drop Broadcasts so they don't clutter up the log
-# (broadcasts must *not* be rejected).
-#
-dropBcast
-#
-# ACCEPT critical ICMP types
-#
-ACCEPT	-	-	icmp	fragmentation-needed
-ACCEPT	-	-	icmp	time-exceeded
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log (these ICMPs cannot be
-# rejected).
-#
-dropInvalid
-#
-# Reject Microsoft noise so that it doesn't clutter up the log.
-#
-REJECT	-	-	udp	135,445
-REJECT	-	-	udp	137:139
-REJECT	-	-	udp	1024:	137
-REJECT	-	-	tcp	135,139,445
-DROP	-	-	udp	1900
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-dropNotSyn
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-DROP	-	-	udp	-	53

Shorewall/Makefile

@@ -1,23 +0,0 @@
-#
-# Shorewall -- /etc/shorewall/Makefile
-#
-# Reload Shorewall if config files are updated.
-
-SWBIN	?= /sbin/shorewall -q
-CONFDIR	?= /etc/shorewall
-SWSTATE	?= $(shell $(SWBIN) show vardir)/firewall
-
-.PHONY: clean
-
-$(SWSTATE): $(CONFDIR)/*
-	@$(SWBIN) save >/dev/null; \
-	RESULT=$$($(SWBIN) reload 2>&1); \
-	if [ $$? -eq 0 ]; then \
-	    $(SWBIN) save >/dev/null; \
-	else \
-	    echo "$${RESULT}" >&2; \
-	    false; \
-	fi
-
-clean:
-	@rm -f $(CONFDIR)/*~ $(CONFDIR)/.*~

Shorewall/Makefile-lite

@@ -1,82 +0,0 @@
-#     Shorewall Packet Filtering Firewall Export Directory Makefile - V4.2
-#
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 2006 - Tom Eastep (teastep@shorewall.net)
-#
-#	Shorewall documentation is available at http://www.shorewall.net
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of Version 2 of the GNU General Public License
-#	as published by the Free Software Foundation.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, write to the Free Software
-#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-################################################################################
-# Place this file in each export directory. Modify each copy to set HOST
-# to the name of the remote firewall corresponding to the directory.
-#
-#	To make the 'firewall' script, type "make".
-#
-#	Once the script is compiling correctly, you can install it by
-#	typing "make install".
-#
-################################################################################
-#                             V A R I A B L E S
-#
-# Files in the export directory on which the firewall script does not depend
-#
-IGNOREFILES =  firewall% Makefile% trace% %~
-#
-# Remote Firewall system
-#
-HOST = gateway
-#
-# Save some typing
-#
-LITEDIR = /var/lib/shorewall-lite
-#
-# Set this if the remote system has a non-standard modules directory
-#
-MODULESDIR=
-#
-# Default target is the firewall script
-#
-################################################################################
-#                                T A R G E T S
-#
-all: firewall
-#
-# Only generate the capabilities file if it doesn't already exist
-#
-capabilities:
-	ssh root@$(HOST) "MODULESDIR=$(MODULESDIR) /usr/share/shorewall-lite/shorecap > $(LITEDIR)/capabilities"
-	scp root@$(HOST):$(LITEDIR)/capabilities .
-#
-# Compile the firewall script. Using the 'wildcard' function causes "*" to be expanded so that
-# 'filter-out' will be presented with the list of files in this directory rather than "*"
-#
-firewall: $(filter-out $(IGNOREFILES) capabilities , $(wildcard *) ) capabilities
-	shorewall compile -e . firewall
-#
-# Only reload on demand.
-#
-install: firewall
-	scp firewall firewall.conf root@$(HOST):$(LITEDIR)
-	ssh root@$(HOST) "/sbin/shorewall-lite restart"
-#
-# Save running configuration
-#
-save:
-	ssh root@$(HOST) "/sbin/shorewall-lite save"
-#
-# Remove generated files
-#
-clean:
-	rm -f capabilities firewall firewall.conf reload

Shorewall/Perl/Shorewall/Accounting.pm

@@ -195,7 +195,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
     $ports  = ''    if $ports  eq 'any' || $ports  eq 'all';
     $sports = ''    if $sports eq 'any' || $sports eq 'all';
 
-    fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT;
+    fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT_SECTION;
 
     my $rule = do_proto( $proto, $ports, $sports ) . do_user ( $user ) . do_test ( $mark, $globals{TC_MASK} ) . do_headers( $headers );
     my $prerule = '';
@@ -266,7 +266,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
     if ( $source eq 'any' || $source eq 'all' ) {
         $source = ALLIP;
     } else {
-	fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT || ! $asection );
+	fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT_SECTION || ! $asection );
     }
 
     if ( have_bridges && ! $asection ) {
@@ -519,9 +519,9 @@ sub setup_accounting() {
 
 		while ( $chainswithjumps && $progress ) {
 		    $progress = 0;
-		    for my $chain1 ( sort  keys %accountingjumps ) {
+		    for my $chain1 ( keys %accountingjumps ) {
 			if ( keys %{$accountingjumps{$chain1}} ) {
-			    for my $chain2 ( sort keys %{$accountingjumps{$chain1}} ) {
+			    for my $chain2 ( keys %{$accountingjumps{$chain1}} ) {
 				delete $accountingjumps{$chain1}{$chain2}, $progress = 1 unless $accountingjumps{$chain2};
 			    }
 			} else {