Update the Shared Config document

Signed-off-by: Tom Eastep <teastep@shorewall.net>
Update Shared config article
2017-10-17 16:51:35 -07:00 · 2017-10-15 19:15:13 -07:00 · 2017-10-15 08:26:27 -07:00 · 2017-10-14 13:39:00 -07:00 · 2017-10-11 15:22:07 -07:00 · 2017-10-11 11:24:54 -07:00
948 changed files with 102133 additions and 78613 deletions
--- a/Samples/three-interfaces/interfaces
+++ b/Samples/three-interfaces/interfaces
@@ -1,21 +0,0 @@
-#
-# Shorewall version 4.0 - Sample Interfaces File for three-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------
-# For information about entries in this file, type "man shorewall-interfaces"
-#
-# For additional information, see
-# http://shorewall.net/Documentation.htm#Interfaces
-#
-###############################################################################
-#ZONE	INTERFACE	BROADCAST	OPTIONS
-net     eth0            detect          tcpflags,dhcp,nosmurfs,routefilter,logmartians
-loc     eth1            detect          tcpflags,nosmurfs,routefilter,logmartians
-dmz     eth2            detect		tcpflags,nosmurfs,routefilter,logmartians
--- a/Samples/three-interfaces/policy
+++ b/Samples/three-interfaces/policy
@@ -1,22 +0,0 @@
-#
-# Shorewall version 3.4 - Sample Policy File for three-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------
-# For information about entries in this file, type "man shorewall-policy"
-#
-# See http://shorewall.net/Documentation.htm#Policy for additional information.
-#
-###############################################################################
-#SOURCE		DEST		POLICY		LOG LEVEL	LIMIT:BURST
-
-loc		net		ACCEPT
-net		all		DROP		info
-# THE FOLLOWING POLICY MUST BE LAST
-all		all		REJECT		info
--- a/Samples/three-interfaces/routestopped
+++ b/Samples/three-interfaces/routestopped
@@ -1,21 +0,0 @@
-#
-# Shorewall version 4.0 - Sample Routestopped File for three-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------
-# For information about entries in this file, type "man shorewall-routestopped"
-#
-# See http://shorewall.net/Documentation.htm#Routestopped and
-# http://shorewall.net/starting_and_stopping_shorewall.htm for additional
-# information.
-#
-##############################################################################
-#INTERFACE	HOST(S)
-eth1		-
-eth2		-
--- a/Samples/two-interfaces/policy
+++ b/Samples/two-interfaces/policy
@@ -1,23 +0,0 @@
-#
-# Shorewall version 4.0 - Sample Policy File for two-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------
-# For information about entries in this file, type "man shorewall-policy"
-#
-# See http://shorewall.net/Documentation.htm#Policy for additional information.
-#
-###############################################################################
-#SOURCE		DEST		POLICY		LOG LEVEL	LIMIT:BURST
-
-loc		net		ACCEPT
-net		all		DROP		info
-# THE FOLLOWING POLICY MUST BE LAST
-all		all		REJECT		info
-
--- a/Samples/two-interfaces/routestopped
+++ b/Samples/two-interfaces/routestopped
@@ -1,20 +0,0 @@
-#
-# Shorewall version 4.0 - Sample Routestopped File for two-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------
-# For information about entries in this file, type "man shorewall-routestopped"
-#
-# See http://shorewall.net/Documentation.htm#Routestopped and
-# http://shorewall.net/starting_and_stopping_shorewall.htm for additional
-# information.
-#
-##############################################################################
-#INTERFACE	HOST(S)                  OPTIONS
-eth1		-
--- a/Samples6/one-interface/shorewall6.conf
+++ b/Samples6/one-interface/shorewall6.conf
@@ -1,150 +0,0 @@
-###############################################################################
-#
-# Shorewall6 version 4 - Sample shorewall.conf for one-interface configuration.
-# Copyright (C) 2006,2008 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#
-# For information about the settings in this file, type "man shorewall6.conf"
-#
-# The manpage is also online at 
-# http://shorewall.net/manpages6/shorewall6.conf.html
-###############################################################################
-#		       S T A R T U P   E N A B L E D
-###############################################################################
-
-STARTUP_ENABLED=No
-
-###############################################################################
-#		              V E R B O S I T Y
-###############################################################################
-
-VERBOSITY=1
-
-###############################################################################
-#			       L O G G I N G
-###############################################################################
-
-LOGFILE=/var/log/messages
-
-STARTUP_LOG=
-
-LOG_VERBOSITY=
-
-LOGFORMAT="Shorewall:%s:%s:"
-
-LOGTAGONLY=No
-
-LOGRATE=
-
-LOGBURST=
-
-LOGALLNEW=
-
-BLACKLIST_LOGLEVEL=
-
-TCP_FLAGS_LOG_LEVEL=info
-
-SMURF_LOG_LEVEL=info
-
-###############################################################################
-#	L O C A T I O N	  O F	F I L E S   A N D   D I R E C T O R I E S
-###############################################################################
-
-IP6TABLES=
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
-
-SHOREWALL_SHELL=/bin/sh
-
-SUBSYSLOCK=
-
-MODULESDIR=
-
-CONFIG_PATH=/etc/shorewall6:/usr/share/shorewall6:/usr/share/shorewall
-
-RESTOREFILE=
-
-LOCKFILE=
-
-###############################################################################
-#		D E F A U L T   A C T I O N S / M A C R O S
-###############################################################################
-
-DROP_DEFAULT="Drop"
-REJECT_DEFAULT="Reject"
-ACCEPT_DEFAULT="none"
-QUEUE_DEFAULT="none"
-NFQUEUE_DEFAULT="none"
-
-###############################################################################
-#                        R S H / R C P  C O M M A N D S
-###############################################################################
-
-RSH_COMMAND='ssh ${root}@${system} ${command}'
-RCP_COMMAND='scp ${files} ${root}@${system}:${destination}'
-
-###############################################################################
-#			F I R E W A L L	  O P T I O N S
-###############################################################################
-
-IP_FORWARDING=Off
-
-TC_ENABLED=No
-
-TC_EXPERT=No
-
-CLEAR_TC=Yes
-
-MARK_IN_FORWARD_CHAIN=No
-
-CLAMPMSS=No
-
-MUTEX_TIMEOUT=60
-
-ADMINISABSENTMINDED=Yes
-
-BLACKLISTNEWONLY=Yes
-
-MODULE_SUFFIX=
-
-FASTACCEPT=No
-
-IMPLICIT_CONTINUE=No
-
-HIGH_ROUTE_MARKS=No
-
-OPTIMIZE=1
-
-EXPORTPARAMS=No
-
-EXPAND_POLICIES=No
-
-KEEP_RT_TABLES=Yes
-
-DELETE_THEN_ADD=Yes
-
-DONT_LOAD=
-
-AUTO_COMMENT=Yes
-
-MANGLE_ENABLED=Yes
-
-AUTOMAKE=No
-
-WIDE_TC_MARKS=Yes
-
-###############################################################################
-#			P A C K E T   D I S P O S I T I O N
-###############################################################################
-
-BLACKLIST_DISPOSITION=DROP
-
-TCP_FLAGS_DISPOSITION=DROP
-
-#LAST LINE -- DO NOT REMOVE
--- a/Samples6/three-interfaces/shorewall6.conf
+++ b/Samples6/three-interfaces/shorewall6.conf
@@ -1,150 +0,0 @@
-###############################################################################
-#
-# Shorewall6 version 4 - Sample shorewall.conf for one-interface configuration.
-# Copyright (C) 2006,2008 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#
-# For information about the settings in this file, type "man shorewall6.conf"
-#
-# The manpage is also online at 
-# http://shorewall.net/manpages6/shorewall6.conf.html
-###############################################################################
-#		       S T A R T U P   E N A B L E D
-###############################################################################
-
-STARTUP_ENABLED=No
-
-###############################################################################
-#		              V E R B O S I T Y
-###############################################################################
-
-VERBOSITY=1
-
-###############################################################################
-#			       L O G G I N G
-###############################################################################
-
-LOGFILE=/var/log/messages
-
-STARTUP_LOG=
-
-LOG_VERBOSITY=
-
-LOGFORMAT="Shorewall:%s:%s:"
-
-LOGTAGONLY=No
-
-LOGRATE=
-
-LOGBURST=
-
-LOGALLNEW=
-
-BLACKLIST_LOGLEVEL=
-
-TCP_FLAGS_LOG_LEVEL=info
-
-SMURF_LOG_LEVEL=info
-
-###############################################################################
-#	L O C A T I O N	  O F	F I L E S   A N D   D I R E C T O R I E S
-###############################################################################
-
-IP6TABLES=
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
-
-SHOREWALL_SHELL=/bin/sh
-
-SUBSYSLOCK=
-
-MODULESDIR=
-
-CONFIG_PATH=/etc/shorewall6/:/usr/share/shorewall6:/usr/share/shorewall
-
-RESTOREFILE=
-
-LOCKFILE=
-
-###############################################################################
-#		D E F A U L T   A C T I O N S / M A C R O S
-###############################################################################
-
-DROP_DEFAULT="Drop"
-REJECT_DEFAULT="Reject"
-ACCEPT_DEFAULT="none"
-QUEUE_DEFAULT="none"
-NFQUEUE_DEFAULT="none"
-
-###############################################################################
-#                        R S H / R C P  C O M M A N D S
-###############################################################################
-
-RSH_COMMAND='ssh ${root}@${system} ${command}'
-RCP_COMMAND='scp ${files} ${root}@${system}:${destination}'
-
-###############################################################################
-#			F I R E W A L L	  O P T I O N S
-###############################################################################
-
-IP_FORWARDING=On
-
-TC_ENABLED=No
-
-TC_EXPERT=No
-
-CLEAR_TC=Yes
-
-MARK_IN_FORWARD_CHAIN=No
-
-CLAMPMSS=No
-
-MUTEX_TIMEOUT=60
-
-ADMINISABSENTMINDED=Yes
-
-BLACKLISTNEWONLY=Yes
-
-MODULE_SUFFIX=
-
-FASTACCEPT=No
-
-IMPLICIT_CONTINUE=No
-
-HIGH_ROUTE_MARKS=No
-
-OPTIMIZE=1
-
-EXPORTPARAMS=No
-
-EXPAND_POLICIES=Yes
-
-KEEP_RT_TABLES=Yes
-
-DELETE_THEN_ADD=Yes
-
-DONT_LOAD=
-
-AUTO_COMMENT=Yes
-
-MANGLE_ENABLED=Yes
-
-AUTOMAKE=No
-
-WIDE_TC_MARKS=Yes
-
-###############################################################################
-#			P A C K E T   D I S P O S I T I O N
-###############################################################################
-
-BLACKLIST_DISPOSITION=DROP
-
-TCP_FLAGS_DISPOSITION=DROP
-
-#LAST LINE -- DO NOT REMOVE
--- a/Samples6/two-interfaces/routestopped
+++ b/Samples6/two-interfaces/routestopped
@@ -1,19 +0,0 @@
-#
-# Shorewall6 version 4.0 - Sample Routestopped File for two-interface configuration.
-# Copyright (C) 2006,2008 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#------------------------------------------------------------------------------
-# For information about entries in this file, type "man shorewall6-routestopped"
-#
-# See http://shorewall.net/starting_and_stopping_shorewall.htm for additional
-# information.
-#
-##############################################################################
-#INTERFACE	HOST(S)                  OPTIONS
-eth1		-
--- a/Samples6/two-interfaces/shorewall6.conf
+++ b/Samples6/two-interfaces/shorewall6.conf
@@ -1,150 +0,0 @@
-###############################################################################
-#
-# Shorewall version 3.4 - Sample shorewall.conf for one-interface configuration.
-# Copyright (C) 2006 by the Shorewall Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# See the file README.txt for further details.
-#
-# For information about the settings in this file, type "man shorewall6.conf"
-#
-# The manpage is also online at 
-# http://shorewall.net/manpages6/shorewall6.conf.html
-###############################################################################
-#		       S T A R T U P   E N A B L E D
-###############################################################################
-
-STARTUP_ENABLED=No
-
-###############################################################################
-#		              V E R B O S I T Y
-###############################################################################
-
-VERBOSITY=1
-
-###############################################################################
-#			       L O G G I N G
-###############################################################################
-
-LOGFILE=/var/log/messages
-
-STARTUP_LOG=
-
-LOG_VERBOSITY=
-
-LOGFORMAT="Shorewall:%s:%s:"
-
-LOGTAGONLY=No
-
-LOGRATE=
-
-LOGBURST=
-
-LOGALLNEW=
-
-BLACKLIST_LOGLEVEL=
-
-TCP_FLAGS_LOG_LEVEL=info
-
-SMURF_LOG_LEVEL=info
-
-###############################################################################
-#	L O C A T I O N	  O F	F I L E S   A N D   D I R E C T O R I E S
-###############################################################################
-
-IP6TABLES=
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
-
-SHOREWALL_SHELL=/bin/sh
-
-SUBSYSLOCK=
-
-MODULESDIR=
-
-CONFIG_PATH=/etc/shorewall6/:/usr/share/shorewall6:/usr/share/shorewall/
-
-RESTOREFILE=
-
-LOCKFILE=
-
-###############################################################################
-#		D E F A U L T   A C T I O N S / M A C R O S
-###############################################################################
-
-DROP_DEFAULT="Drop"
-REJECT_DEFAULT="Reject"
-ACCEPT_DEFAULT="none"
-QUEUE_DEFAULT="none"
-NFQUEUE_DEFAULT="none"
-
-###############################################################################
-#                        R S H / R C P  C O M M A N D S
-###############################################################################
-
-RSH_COMMAND='ssh ${root}@${system} ${command}'
-RCP_COMMAND='scp ${files} ${root}@${system}:${destination}'
-
-###############################################################################
-#			F I R E W A L L	  O P T I O N S
-###############################################################################
-
-IP_FORWARDING=On
-
-TC_ENABLED=No
-
-TC_EXPERT=No
-
-CLEAR_TC=Yes
-
-MARK_IN_FORWARD_CHAIN=No
-
-CLAMPMSS=No
-
-MUTEX_TIMEOUT=60
-
-ADMINISABSENTMINDED=Yes
-
-BLACKLISTNEWONLY=Yes
-
-MODULE_SUFFIX=
-
-FASTACCEPT=No
-
-IMPLICIT_CONTINUE=No
-
-HIGH_ROUTE_MARKS=No
-
-OPTIMIZE=1
-
-EXPORTPARAMS=No
-
-EXPAND_POLICIES=No
-
-KEEP_RT_TABLES=Yes
-
-DELETE_THEN_ADD=Yes
-
-DONT_LOAD=
-
-AUTO_COMMENT=Yes
-
-MANGLE_ENABLED=Yes
-
-AUTOMAKE=No
-
-WIDE_TC_MARKS=Yes
-
-###############################################################################
-#			P A C K E T   D I S P O S I T I O N
-###############################################################################
-
-BLACKLIST_DISPOSITION=DROP
-
-TCP_FLAGS_DISPOSITION=DROP
-
-#LAST LINE -- DO NOT REMOVE
--- a/contrib/shoregen/COPYING
+++ b/contrib/shoregen/COPYING
@@ -2,7 +2,8 @@
 		       Version 2, June 1991

 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+                          51 Franklin Street, Fifth Floor,
+			  Boston, MA 02110-1301 USA
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

@@ -55,7 +56,7 @@ patent must be licensed for everyone's free use or not licensed at all.

  The precise terms and conditions for copying, distribution and
 modification follow.
-
+
 		    GNU GENERAL PUBLIC LICENSE
   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

@@ -110,7 +111,7 @@ above, provided that you also meet all of these conditions:
    License.  (Exception: if the Program itself is interactive but
    does not normally print such an announcement, your work based on
    the Program is not required to print an announcement.)
-
+
 These requirements apply to the modified work as a whole.  If
 identifiable sections of that work are not derived from the Program,
 and can be reasonably considered independent and separate works in
@@ -168,7 +169,7 @@ access to copy from a designated place, then offering equivalent
 access to copy the source code from the same place counts as
 distribution of the source code, even though third parties are not
 compelled to copy the source along with the object code.
-
+
  4. You may not copy, modify, sublicense, or distribute the Program
 except as expressly provided under this License.  Any attempt
 otherwise to copy, modify, sublicense or distribute the Program is
@@ -225,7 +226,7 @@ impose that choice.

 This section is intended to make thoroughly clear what is believed to
 be a consequence of the rest of this License.
-
+
  8. If the distribution and/or use of the Program is restricted in
 certain countries either by patents or by copyrighted interfaces, the
 original copyright holder who places the Program under this License
@@ -278,7 +279,7 @@ PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGES.

 		     END OF TERMS AND CONDITIONS
-
+
 	    How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
@@ -291,7 +292,7 @@ convey the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
+    Copyright (C) 19yy  <name of author>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -313,7 +314,7 @@ Also add information on how to contact you by electronic and paper mail.
 If the program is interactive, make it output a short notice like this
 when it starts in an interactive mode:

-    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision version 69, Copyright (C) 19yy name of author
    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.
--- a/Shorewall-core/INSTALL
+++ b/Shorewall-core/INSTALL
@@ -0,0 +1,24 @@
+Shoreline Firewall (Shorewall) Version 5
+-----         ----
+
+-----------------------------------------------------------------------------
+
+     This program is free software; you can redistribute it and/or modify
+     it under the terms of Version 2 of the GNU General Public License
+     as published by the Free Software Foundation.
+
+     This program is distributed in the hope that it will be useful,
+     but WITHOUT ANY WARRANTY; without even the implied warranty of
+     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+     GNU General Public License for more details.
+
+     You should have received a copy of the GNU General Public License
+     along with this program; if not, write to the Free Software
+     Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+---------------------------------------------------------------------------
+
+Please see http://www.shorewall.net/Install.htm for installation
+instructions.
+
+
--- a/Shorewall-core/configure
+++ b/Shorewall-core/configure
@@ -0,0 +1,243 @@
+#!/bin/bash
+#
+#     Shorewall Packet Filtering Firewall RPM configuration program - V4.6
+#
+#     (c) 2012,2014 - Tom Eastep (teastep@shorewall.net)
+#
+#	Shorewall documentation is available at http://www.shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       Usage: ./configure [ <option>=<setting> ] ...
+#
+#
+################################################################################################
+#
+# Build updates this
+#
+VERSION=4.6.12
+
+case "$BASH_VERSION" in
+    [4-9].*)
+	;;
+    *)
+	echo "ERROR: This program requires Bash 4.0 or later" >&2
+	exit 1
+	;;
+esac
+
+declare -A params
+declare -A options
+
+getfileparams() {
+    while read option; do
+	case $option in
+	    \#*)
+		;;
+	    *)
+		on=${option%=*}
+		ov=${option#*=}
+		ov=${ov%#*}
+		[ -n "$on" ] && options[${on}]="${ov}"
+		;;
+	esac
+
+    done
+
+    return 0
+}
+
+for p in $@; do
+
+    if [ -n "${p}" ]; then
+	declare -u pn
+
+	pn=${p%=*}
+	pn=${pn#--}
+	pv=${p#*=}
+
+	if [ -n "${pn}" ]; then
+
+	    case ${pn} in
+		VENDOR)
+		    pn=HOST
+		    ;;
+		SHAREDSTATEDIR)
+		    pn=VARLIB
+		    ;;
+		DATADIR)
+		    pn=SHAREDIR
+		    ;;
+	    esac
+
+	    params[${pn}]="${pv}"
+	else
+	    echo "ERROR: Invalid option ($p)" >&2
+	    exit 1
+	fi
+    fi
+done
+
+cd $(dirname $0)
+
+vendor=${params[HOST]}
+
+if [ -z "$vendor" ]; then
+    if [ -f /etc/os-release ]; then
+	eval $(cat /etc/os-release | grep ^ID=)
+
+	case $ID in
+	    fedora|rhel)
+		vendor=redhat
+		;;
+	    debian|ubuntu)
+		vendor=debian
+		;;
+	    opensuse)
+		vendor=suse
+		;;
+	    *)
+		vendor="$ID"
+		;;
+	esac
+
+	params[HOST]="$vendor"
+    fi
+fi
+
+if [ -z "$vendor" ]; then
+    case `uname` in
+	Darwin)
+	    params[HOST]=apple
+	    rcfile=shorewallrc.apple
+	    ;;
+	cygwin*|CYGWIN*)
+	    params[HOST]=cygwin
+	    rcfile=shorewallrc.cygwin
+	    ;;
+	*)
+	    if [ -f /etc/debian_version ]; then
+		params[HOST]=debian
+		ls -l /sbin/init | fgrep -q systemd &&  rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
+	    elif [ -f /etc/redhat-release ]; then
+		params[HOST]=redhat
+		rcfile=shorewallrc.redhat
+	    elif [ -f /etc/slackware-version ] ; then
+		params[HOST]=slackware
+		rcfile=shorewallrc.slackware
+	    elif [ -f /etc/SuSE-release ]; then
+		params[HOST]=suse
+		rcfile=shorewallrc.suse
+	    elif [ -f /etc/arch-release ] ; then
+		params[HOST]=archlinux
+		rcfile=shorewallrc.archlinux
+	    elif [ -f /etc/openwrt_release ]; then
+		params[HOST]=openwrt
+		rcfile=shorewallrc.openwrt
+	    else
+		params[HOST]=linux
+		rcfile=shorewallrc.default
+	    fi
+	    ;;
+    esac
+    vendor=${params[HOST]}
+else
+    if [ $vendor = linux ]; then
+	rcfile=shorewallrc.default;
+    elif [ $vendor = debian -a -f /etc/debian_version ]; then
+	ls -l /sbin/init | fgrep -q systemd && rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
+    else
+	rcfile=shorewallrc.$vendor
+    fi
+
+    if [ ! -f $rcfile ]; then
+	echo "ERROR: $vendor is not a recognized host type" >&2
+	exit 1
+    elif [ $vendor = default ]; then
+	params[HOST]=linux
+	vendor=linux
+    elif [[ $vendor == debian.* ]]; then
+	params[HOST]=debian
+	vendor=debian
+    fi
+fi
+
+if [ $vendor = linux ]; then
+    echo "INFO: Creating a generic Linux installation - " `date`;
+else
+    echo "INFO: Creating a ${params[HOST]}-specific installation - " `date`;
+fi
+
+echo
+
+getfileparams < $rcfile || exit 1
+
+for p in ${!params[@]}; do
+    options[${p}]="${params[${p}]}"
+done
+
+echo '#'                                                                 > shorewallrc
+echo "# Created by Shorewall Core version $VERSION configure - " `date --utc --date="@${SOURCE_DATE_EPOCH:-$(date +%s)}"` >> shorewallrc
+echo "# rc file: $rcfile"                                               >> shorewallrc
+echo '#'                                                                >> shorewallrc
+
+if [ $# -gt 0 ]; then
+    echo "# Input: $@" >> shorewallrc
+    echo '#'           >> shorewallrc
+fi
+
+if [ -n "${options[VARLIB]}" ]; then
+    if [ -z "${options[VARDIR]}" ]; then
+	options[VARDIR]='${VARLIB}/${PRODUCT}'
+    fi
+elif [ -n "${options[VARDIR]}" ]; then
+    if [ -z "{$options[VARLIB]}" ]; then
+	options[VARLIB]=${options[VARDIR]}
+	options[VARDIR]='${VARLIB}/${PRODUCT}'
+    fi
+fi
+
+if [ -z "${options[SERVICEDIR]}" ]; then
+    options[SERVICEDIR]="${options[SYSTEMD]}"
+fi
+
+for on in \
+    HOST \
+    PREFIX \
+    SHAREDIR \
+    LIBEXECDIR \
+    PERLLIBDIR \
+    CONFDIR \
+    SBINDIR \
+    MANDIR \
+    INITDIR \
+    INITSOURCE \
+    INITFILE \
+    AUXINITSOURCE \
+    AUXINITFILE \
+    SERVICEDIR \
+    SERVICEFILE \
+    SYSCONFFILE \
+    SYSCONFDIR \
+    SPARSE \
+    ANNOTATED \
+    VARLIB \
+    VARDIR \
+    DEFAULT_PAGER
+do
+    echo "$on=${options[${on}]}"
+    echo "$on=${options[${on}]}" >> shorewallrc
+done
--- a/Shorewall-core/configure.pl
+++ b/Shorewall-core/configure.pl
@@ -0,0 +1,228 @@
+#! /usr/bin/perl -w
+#
+#     Shorewall Packet Filtering Firewall RPM configuration program - V4.5
+#
+#     (c) 2012, 2014 - Tom Eastep (teastep@shorewall.net)
+#
+#	Shorewall documentation is available at http://www.shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       Usage: ./configure.pl <option>=<setting> ...
+#
+#
+################################################################################################
+use strict;
+
+#
+# Build updates this
+#
+use constant {
+    VERSION => '4.6.12'
+};
+
+my %params;
+my %options;
+
+my %aliases = ( VENDOR         => 'HOST',
+		SHAREDSTATEDIR => 'VARLIB',
+		DATADIR        => 'SHAREDIR' );
+
+for ( @ARGV ) {
+    die "ERROR: Invalid option specification ( $_ )" unless /^(?:--)?(\w+)=(.*)$/;
+
+    my $pn = uc $1;
+    my $pv = $2 || '';
+
+    $pn = $aliases{$pn} if exists $aliases{$pn};
+
+    $params{$pn} = $pv;
+}
+
+use File::Basename;
+chdir dirname($0);
+
+my $vendor = $params{HOST};
+my $rcfile;
+my $rcfilename;
+
+unless ( defined $vendor ) {
+    if ( -f '/etc/os-release' ) {
+	my $id = `cat /etc/os-release | grep ^ID=`;
+
+	chomp $id;
+
+	$id =~ s/ID=//;
+	
+	if ( $id eq 'fedora' || $id eq 'rhel' ) {
+	    $vendor = 'redhat';
+	} elsif ( $id eq 'opensuse' ) {
+	    $vendor = 'suse';
+	} elsif ( $id eq 'ubuntu' || $id eq 'debian' ) {
+	    my $init = `ls -l /sbin/init`;
+	    $vendor = $init =~ /systemd/ ? 'debian.systemd' : 'debian.sysvinit';
+	} else {
+	    $vendor = $id;
+	}
+    }
+
+    $params{HOST} = $vendor;
+    $params{HOST} =~ s/\..*//;
+}
+
+if ( defined $vendor ) {
+    if ( $vendor eq 'debian' && -f '/etc/debian_version' ) {
+	if ( -l '/sbin/init' ) {
+	    if ( readlink('/sbin/init') =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
+	    } else {
+		$rcfilename = 'shorewallrc.debian.sysvinit';
+	    }
+	} else {
+	    $rcfilename = 'shorewallrc.debian.sysvinit';
+	}
+    } else {
+	$rcfilename = $vendor eq 'linux' ? 'shorewallrc.default' : 'shorewallrc.' . $vendor;
+    }
+
+    unless ( -f $rcfilename ) {
+	die qq("ERROR: $vendor" is not a recognized host type);
+    } elsif ( $vendor eq 'default' ) {
+	$params{HOST} = $vendor = 'linux';
+    } elsif ( $vendor =~ /^debian\./ ) {
+	$params{HOST} = $vendor = 'debian';
+    }
+} else {
+    if ( -f '/etc/debian_version' ) {
+	$vendor = 'debian';
+	if ( -l '/sbin/init' ) {
+	    if ( readlink( '/sbin/init' ) =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
+	    } else {
+		$rcfilename = 'shorewallrc.debian.sysvinit';
+	    }
+	} else {
+	    $rcfilename = 'shorewallrc.debian.sysvinit';
+	}
+    } elsif ( -f '/etc/redhat-release' ){
+	$vendor = 'redhat';
+	$rcfilename = 'shorewallrc.redhat';
+    } elsif ( -f '/etc/slackware-version' ) {
+	$vendor = 'slackware';
+	$rcfilename = 'shorewallrc.slackware';
+    } elsif ( -f '/etc/SuSE-release' ) {
+	$vendor = 'suse';
+	$rcfilename = 'shorewallrc.suse';
+    } elsif ( -f '/etc/arch-release' ) {
+	$vendor = 'archlinux';
+	$rcfilename = 'shorewallrc.archlinux';
+    } elsif ( `uname` =~ '^Darwin' ) {
+	$vendor = 'apple';
+	$rcfilename = 'shorewallrc.apple';
+    } elsif ( `uname` =~ /^Cygwin/i ) {
+	$vendor = 'cygwin';
+	$rcfilename = 'shorewallrc.cygwin';
+    } else {
+	$vendor = 'linux';
+	$rcfilename = 'shorewallrc.default';
+    }
+
+    $params{HOST} = $vendor;
+}
+
+my @localtime = localtime;
+my @abbr = qw( Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec );
+
+if ( $vendor eq 'linux' ) {
+    printf "INFO: Creating a generic Linux installation - %s %2d %04d %02d:%02d:%02d\n\n", $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
+} else {
+    printf "INFO: Creating a %s-specific installation - %s %2d %04d %02d:%02d:%02d\n\n", $params{HOST}, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];;
+}
+
+open $rcfile, '<', $rcfilename or die "Unable to open $rcfilename for input: $!";
+
+while ( <$rcfile> ) {
+    s/\s*#.*//;
+    unless ( /^\s*$/ ) {
+	chomp;
+	die "ERROR: Invalid entry ($_) in $rcfilename, line $." unless /\s*(\w+)=(.*)/;
+	$options{$1} = $2;
+    }
+}
+
+close $rcfile;
+
+while ( my ( $p, $v ) = each %params ) {
+    $options{$p} = ${v};
+}
+
+my $outfile;
+
+open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
+
+if ( $ENV{SOURCE_DATE_EPOCH} ) {
+    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s\n", VERSION, `date  --utc --date=\"\@$ENV{SOURCE_DATE_EPOCH}\"`;
+} else {
+    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+}
+
+print $outfile "# rc file: $rcfilename\n#\n";
+
+print  $outfile "# Input: @ARGV\n#\n" if @ARGV;
+
+if ( $options{VARLIB} ) {
+    unless ( $options{VARDIR} ) {
+	$options{VARDIR} = '${VARLIB}/${PRODUCT}';
+    }
+} elsif ( $options{VARDIR} ) {
+    $options{VARLIB} = $options{VARDIR};
+    $options{VARDIR} = '${VARLIB}/${PRODUCT}';
+}
+
+$options{SERVICEDIR}=$options{SYSTEMD} unless $options{SERVICEDIR};
+
+for ( qw/ HOST
+	  PREFIX
+	  SHAREDIR
+	  LIBEXECDIR
+	  PERLLIBDIR
+	  CONFDIR
+	  SBINDIR
+	  MANDIR
+	  INITDIR
+	  INITSOURCE
+	  INITFILE
+	  AUXINITSOURCE
+	  AUXINITFILE
+	  SERVICEDIR
+	  SERVICEFILE
+	  SYSCONFFILE
+	  SYSCONFDIR
+	  SPARSE
+	  ANNOTATED
+	  VARLIB
+	  VARDIR
+          DEFAULT_PAGER / ) {
+
+    my $val = $options{$_} || '';
+
+    print          "$_=$val\n";
+    print $outfile "$_=$val\n";
+}
+
+close $outfile;
+
+1;
--- a/Shorewall-core/init.slackware.firewall.sh
+++ b/Shorewall-core/init.slackware.firewall.sh
@@ -45,7 +45,7 @@ status() {

 export SHOREWALL_INIT_SCRIPT=1

-case $1 in 
+case $1 in
 	'start')
 	start
 	;;
--- a/Shorewall-core/install.sh
+++ b/Shorewall-core/install.sh
@@ -0,0 +1,411 @@
+#!/bin/sh
+#
+# Script to install Shoreline Firewall Core Modules
+#
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#
+#       Shorewall documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+
+VERSION=xxx # The Build script inserts the actual version
+PRODUCT=shorewall-core
+Product="Shorewall Core"
+
+usage() # $1 = exit status
+{
+    ME=$(basename $0)
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    exit $1
+}
+
+install_file() # $1 = source $2 = target $3 = mode
+{
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
+}
+
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
+#
+# Source common functions
+#
+. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
+#
+# Parse the run line
+#
+finished=0
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
+
+#
+# Read the RC file
+#
+if [ $# -eq 0 ]; then
+    if [ -f ./shorewallrc ]; then
+	file=./shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    elif [ -f ~/.shorewallrc ]; then
+	file=~/.shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    elif [ -f /usr/share/shorewall/shorewallrc ]; then
+	file=/usr/share/shorewall/shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    else
+	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
+    fi
+elif [ $# -eq 1 ]; then
+    file=$1
+    case $file in
+	/*|.*)
+	    ;;
+	*)
+	    file=./$file || exit 1
+	    ;;
+    esac
+
+    . $file || fatal_error "Can not load the RC file: $file"
+else
+    usage 1
+fi
+
+update=0
+
+if [ -z "${VARLIB}" ]; then
+    VARLIB=${VARDIR}
+    VARDIR="${VARLIB}/${PRODUCT}"
+    update=1
+elif [ -z "${VARDIR}" ]; then
+    VARDIR="${VARLIB}/${PRODUCT}"
+    update=2
+fi
+
+for var in SHAREDIR LIBEXECDIR PERLLIBDIR CONFDIR SBINDIR VARLIB VARDIR; do
+    require $var
+done
+
+[ "${INITFILE}" != 'none/' ] && require INITSOURCE && require INITDIR
+
+if [ -z "$BUILD" ]; then
+    case $(uname) in
+	cygwin*|CYGWIN*)
+	    BUILD=cygwin
+	    ;;
+	Darwin)
+	    BUILD=apple
+	    ;;
+	*)
+	    if [ -f /etc/os-release ]; then
+		eval $(cat /etc/os-release | grep ^ID)
+
+		case $ID in
+		    fedora|rhel|centos|foobar)
+			BUILD=redhat
+			;;
+		    debian)
+			BUILD=debian
+			;;
+		    gentoo)
+			BUILD=gentoo
+			;;
+		    opensuse)
+			BUILD=suse
+			;;
+		    *)
+			BUILD="$ID"
+			;;
+		esac
+	    elif [ -f /etc/debian_version ]; then
+		BUILD=debian
+	    elif [ -f /etc/gentoo-release ]; then
+		BUILD=gentoo
+	    elif [ -f /etc/redhat-release ]; then
+		BUILD=redhat
+	    elif [ -f /etc/slackware-version ] ; then
+		BUILD=slackware
+	    elif [ -f /etc/SuSE-release ]; then
+		BUILD=suse
+	    elif [ -f /etc/arch-release ] ; then
+		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ] ; then
+		BUILD=openwrt
+	    else
+		BUILD=linux
+	    fi
+	    ;;
+    esac
+fi
+
+case $BUILD in
+    cygwin*)
+	if [ -z "$DESTDIR" ]; then
+	    DEST=
+	    INIT=
+	fi
+
+	OWNER=$(id -un)
+	GROUP=$(id -gn)
+	;;
+    apple)
+	if [ -z "$DESTDIR" ]; then
+	    DEST=
+	    INIT=
+	    SPARSE=Yes
+	fi
+
+	[ -z "$OWNER" ] && OWNER=root
+	[ -z "$GROUP" ] && GROUP=wheel
+	;;
+    *)
+	if [ $(id -u) -eq 0 ]; then
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
+	;;
+esac
+
+#
+# Determine where to install the firewall script
+#
+
+[ -n "$HOST" ] || HOST=$BUILD
+
+case "$HOST" in
+    cygwin)
+	echo "Installing Cygwin-specific configuration..."
+	;;
+    apple)
+	echo "Installing Mac-specific configuration...";
+	;;
+    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
+	;;
+    *)
+	fatal_error "Unknown HOST \"$HOST\""
+	;;
+esac
+
+if [ -z "$file" ]; then
+    if [ $HOST = linux ]; then
+	file=shorewallrc.default
+    else
+	file=shorewallrc.${HOST}
+    fi
+
+    echo "You have not specified a configuration file and ~/.shorewallrc does not exist" >&2
+    echo "Shorewall-core $VERSION has determined that the $file configuration is appropriate for your system" >&2
+    echo "Please review the settings in that file. If you wish to change them, make a copy and modify the copy" >&2
+    echo "Then re-run install.sh passing either $file or the name of your modified copy" >&2
+    echo "" >&2
+    echo "Example:" >&2
+    echo "" >&2
+    echo "   ./install.sh $file" >&2
+    exit 1
+fi
+
+if [ -n "$DESTDIR" ]; then
+    if [ $BUILD != cygwin ]; then
+	if [ `id -u` != 0 ] ; then
+	    echo "Not setting file owner/group permissions, not running as root."
+	fi
+    fi
+fi
+
+echo "Installing $Product Version $VERSION"
+
+#
+# Create directories
+#
+make_parent_directory ${DESTDIR}${LIBEXECDIR}/shorewall 0755
+
+make_parent_directory ${DESTDIR}${SHAREDIR}/shorewall 0755
+
+make_parent_directory ${DESTDIR}${CONFDIR} 0755
+
+[ -n "${SYSCONFDIR}" ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+[ -n "${SERVICEDIR}" ] && make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+
+make_parent_directory ${DESTDIR}${SBINDIR} 0755
+
+[ -n "${MANDIR}" ] && make_parent_directory ${DESTDIR}${MANDIR} 0755
+
+if [ -n "${INITFILE}" ]; then
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
+
+    if [ -n "$AUXINITSOURCE" -a -f "$AUXINITSOURCE" ]; then
+	install_file $AUXINITSOURCE ${DESTDIR}${INITDIR}/$AUXINITFILE 0544
+	[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${INITDIR}/$AUXINITFILE
+	echo  "SysV init script $AUXINITSOURCE installed in ${DESTDIR}${INITDIR}/$AUXINITFILE"
+    fi
+fi
+#
+# Note: ${VARDIR} is created at run-time since it has always been
+#       a relocatable directory on a per-product basis
+#
+# Install the CLI
+#
+install_file shorewall ${DESTDIR}${SBINDIR}/shorewall 0755
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall
+echo "Shorewall CLI program installed in ${DESTDIR}${SBINDIR}/shorewall"
+#
+# Install wait4ifup
+#
+install_file wait4ifup ${DESTDIR}${LIBEXECDIR}/shorewall/wait4ifup 0755
+
+echo
+echo "wait4ifup installed in ${DESTDIR}${LIBEXECDIR}/shorewall/wait4ifup"
+
+#
+# Install the libraries
+#
+for f in lib.* ; do
+    case $f in
+        *installer)
+            ;;
+        *)
+            install_file $f ${DESTDIR}${SHAREDIR}/shorewall/$f 0644
+            echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
+            ;;
+    esac
+done
+
+if [ $SHAREDIR != /usr/share ]; then
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.core
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.cli
+fi
+
+#
+# Install the Man Pages
+#
+if [ -n "$MANDIR" ]; then
+    cd manpages
+
+    [ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
+
+    for f in *.8; do
+	gzip -9c $f > $f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
+    done
+
+    cd ..
+
+    echo "Man Pages Installed"
+fi
+
+#
+# Symbolically link 'functions' to lib.base
+#
+ln -sf lib.base ${DESTDIR}${SHAREDIR}/shorewall/functions
+#
+# Create the version file
+#
+echo "$VERSION" > ${DESTDIR}${SHAREDIR}/shorewall/coreversion
+chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall/coreversion
+
+if [ -z "${DESTDIR}" ]; then
+    if [ $update -ne 0 ]; then
+	echo "Updating $file - original saved in $file.bak"
+
+	cp $file $file.bak
+
+	echo '#'                                             >> $file
+	echo "# Updated by Shorewall-core $VERSION -" `date` >> $file
+	echo '#'                                             >> $file
+
+	[ $update -eq 1 ] && sed -i 's/VARDIR/VARLIB/' $file
+
+	echo 'VARDIR=${VARLIB}/${PRODUCT}' >> $file
+    fi
+fi
+
+[ $file != "${DESTDIR}${SHAREDIR}/shorewall/shorewallrc" ] && cp $file ${DESTDIR}${SHAREDIR}/shorewall/shorewallrc
+
+
+[ -z "${DESTDIR}" ] && [ ! -f ~/.shorewallrc ] && cp ${SHAREDIR}/shorewall/shorewallrc ~/.shorewallrc
+
+if [ ${SHAREDIR} != /usr/share ]; then
+    for f in lib.*; do
+        case $f in
+            *installer)
+                ;;
+            *)
+                if [ $BUILD != apple ]; then
+                    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+                else
+                    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+                fi
+                ;;
+        esac
+    done
+fi
+#
+# Report Success
+#
+echo "$Product Version $VERSION Installed"
--- a/Shorewall-core/lib.base
+++ b/Shorewall-core/lib.base
@@ -0,0 +1,41 @@
+#
+# Shorewall 5.1 -- /usr/share/shorewall/lib.base
+#
+#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# This library is a compatibility wrapper around lib.core.
+#
+
+if [ -z "$PRODUCT" ]; then
+    #
+    # This is modified by the installer when ${SHAREDIR} != /usr/share
+    #
+    . /usr/share/shorewall/shorewallrc
+
+    g_basedir=${SHAREDIR}/shorewall
+
+    if [ -z "$SHOREWALL_LIBVERSION" ]; then
+	. ${g_basedir}/lib.core
+    fi
+
+    set_default_product
+
+    setup_product_environment
+fi
--- a/Shorewall-core/lib.cli
+++ b/Shorewall-core/lib.cli
--- a/Shorewall-core/lib.common
+++ b/Shorewall-core/lib.common
@@ -0,0 +1,808 @@
+#
+# Shorewall 5.1 -- /usr/share/shorewall/lib.common.
+#
+#     (c) 2010-2017 - Tom Eastep (teastep@shorewall.net)
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# The purpose of this library is to hold those functions used by both the CLI and by the
+# generated firewall scripts. To avoid versioning issues, it is copied into generated
+# scripts rather than loaded at run-time.
+#
+#########################################################################################
+#
+# Wrapper around logger that sets the tag according to $SW_LOGGERTAG
+#
+mylogger() {
+    local level
+
+    level=$1
+    shift
+
+    if [ -n "$SW_LOGGERTAG" ]; then
+	logger -p $level -t "$SW_LOGGERTAG" $*
+    else
+	logger -p $level $*
+    fi
+}
+
+#
+# Issue a message and stop
+#
+startup_error() # $* = Error Message
+{
+    echo "   ERROR: $@: Firewall state not changed" >&2
+
+    if [ $LOG_VERBOSITY -ge 0 ]; then
+        timestamp="$(date +'%b %e %T') "
+        echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
+    fi
+
+    case $COMMAND in
+        start)
+	    mylogger kern.err "ERROR:$g_product start failed:Firewall state not changed"
+	    ;;
+	restart)
+	    mylogger kern.err "ERROR:$g_product restart failed:Firewall state not changed"
+	    ;;
+	restore)
+	    mylogger kern.err "ERROR:$g_product restore failed:Firewall state not changed"
+	    ;;
+    esac
+
+    if [ $LOG_VERBOSITY -ge 0 ]; then
+        timestamp="$(date +'%b %e %T') "
+
+	case $COMMAND in
+	    start)
+		echo "${timestamp}  ERROR:$g_product start failed:Firewall state not changed" >> $STARTUP_LOG
+		;;
+	    restart)
+		echo "${timestamp}  ERROR:$g_product restart failed:Firewall state not changed" >> $STARTUP_LOG
+		;;
+	    restore)
+		echo "${timestamp}  ERROR:$g_product restore failed:Firewall state not changed" >> $STARTUP_LOG
+		;;
+	esac
+    fi
+
+    mutex_off
+    kill $$
+    exit 2
+}
+
+#
+# Create the required option string and run the passed script using
+# $SHOREWALL_SHELL
+#
+run_it() {
+    local script
+    local options
+
+    export VARDIR
+
+    script=$1
+    shift
+
+    if [ x$1 = xtrace -o x$1 = xdebug ]; then
+	options="$1 -"
+	shift;
+    else
+	options='-'
+    fi
+
+    [ -n "$g_noroutes" ]   && options=${options}n
+    [ -n "$g_timestamp" ]  && options=${options}t
+    [ -n "$g_purge" ]      && options=${options}p
+    [ -n "$g_recovering" ] && options=${options}r
+    [ -n "$g_counters" ]   && options=${options}c
+
+    options="${options}V $VERBOSITY"
+
+    [ -n "$RESTOREFILE" ] && options="${options} -R $RESTOREFILE"
+
+    $SHOREWALL_SHELL $script $options $@
+}
+
+#
+# Message to stderr
+#
+error_message() # $* = Error Message
+{
+   echo "   $@" >&2
+   return 1
+}
+
+#
+# Undo the effect of 'split()'
+#
+join()
+{
+    local f
+    local o
+    o=
+
+    for f in $* ; do
+        o="${o:+$o:}$f"
+    done
+
+    echo $o
+}
+
+#
+# Return the number of elements in a list
+#
+list_count() # $* = list
+{
+    return $#
+}
+
+#
+# Split a colon-separated list into a space-separated list
+#
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    echo $*
+    IFS=$ifs
+}
+
+#
+# Split a comma-separated list into a space-separated list
+#
+split_list() {
+    local ifs
+    ifs=$IFS
+    IFS=,
+    echo $*
+    IFS=$ifs
+}
+
+#
+# Search a list looking for a match -- returns zero if a match found
+# 1 otherwise
+#
+list_search() # $1 = element to search for , $2-$n = list
+{
+    local e
+    e=$1
+
+    while [ $# -gt 1 ]; do
+	shift
+	[ "x$e" = "x$1" ] && return 0
+    done
+
+    return 1
+}
+
+#
+# Suppress all output for a command
+#
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+#
+# Suppress all output and input - mainly for preventing leaked file descriptors
+# to avoid SELinux denials
+#
+qtnoin()
+{
+    "$@" </dev/null >/dev/null 2>&1
+}
+
+qt1()
+{
+    local status
+
+    while [ 1 ]; do
+	"$@" </dev/null >/dev/null 2>&1
+	status=$?
+	[ $status -ne 4 ] && return $status
+    done
+}
+
+#
+# Determine if Shorewall[6] is "running"
+#
+product_is_started() {
+    qt1 $g_tool -L shorewall -n
+}
+
+shorewall_is_started() {
+    qt1 $IPTABLES -L shorewall -n
+}
+
+shorewall6_is_started() {
+    qt1 $IP6TABLES -L shorewall -n
+}
+
+#
+# Echos the fully-qualified name of the calling shell program
+#
+my_pathname() {
+    local pwd
+    pwd=$PWD
+    cd $(dirname $0)
+    echo $PWD/$(basename $0)
+    cd $pwd
+}
+
+#
+# Source a user exit file if it exists
+#
+run_user_exit() # $1 = file name
+{
+    local user_exit
+    user_exit=$(find_file $1)
+
+    if [ -f $user_exit ]; then
+	progress_message "Processing $user_exit ..."
+	. $user_exit
+    fi
+}
+
+#
+# Load a Kernel Module -- assumes that the variable 'moduledirectories' contains
+#                         a space-separated list of directories to search for
+#                         the module and that 'moduleloader' contains the
+#                         module loader command.
+#
+loadmodule() # $1 = module name, $2 - * arguments
+{
+    local modulename
+    modulename=$1
+    shift
+    local moduleoptions
+    moduleoptions=$*
+    local modulefile
+    local suffix
+
+    if [ -d /sys/module/ ]; then
+	if ! list_search $modulename $DONT_LOAD; then
+	    if [ ! -d /sys/module/$modulename ]; then
+		case $moduleloader in
+		    insmod)
+			for directory in $moduledirectories; do
+			    for modulefile in $directory/${modulename}.*; do
+				if [ -f $modulefile ]; then
+				    insmod $modulefile $moduleoptions
+				    return
+				fi
+			    done
+			done
+			;;
+		    *)
+			modprobe -q $modulename $moduleoptions
+			;;
+		esac
+	    fi
+	fi
+    elif ! list_search $modulename $DONT_LOAD $MODULES; then
+	case $moduleloader in
+	    insmod)
+		for directory in $moduledirectories; do
+		    for modulefile in $directory/${modulename}.*; do
+			if [ -f $modulefile ]; then
+			    insmod $modulefile $moduleoptions
+			    return
+			fi
+		    done
+		done
+		;;
+	    *)
+		modprobe -q $modulename $moduleoptions
+		;;
+	esac
+    fi
+}
+
+#
+# Reload the Modules
+#
+reload_kernel_modules() {
+
+    local save_modules_dir
+    save_modules_dir=$MODULESDIR
+    local directory
+    local moduledirectories
+    moduledirectories=
+    local moduleloader
+    moduleloader=modprobe
+    local uname
+    local extras
+
+    if ! qt mywhich modprobe; then
+	moduleloader=insmod
+    fi
+
+    if [ -n "$MODULESDIR" ]; then
+	case "$MODULESDIR" in
+	    +*)
+		extras="$MODULESDIR"
+		extras=${extras#+}
+		MODULESDIR=
+		;;
+	esac
+    fi
+
+    if [ -z "$MODULESDIR" ]; then
+	uname=$(uname -r)
+	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	if [ -n "$extras" ]; then
+	    for directory in $(split "$extras"); do
+		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
+	    done
+	fi
+    fi
+
+    [ -d /sys/module/ ] || MODULES=$(lsmod | cut -d ' ' -f1)
+
+    for directory in $(split $MODULESDIR); do
+	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
+    done
+
+    [ -n "$moduledirectories" ] && while read command; do
+	eval $command
+    done
+
+    MODULESDIR=$save_modules_dir
+}
+
+#
+# Load kernel modules required for Shorewall
+#
+load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
+{
+    local save_modules_dir
+    save_modules_dir=$MODULESDIR
+    local directory
+    local moduledirectories
+    moduledirectories=
+    local moduleloader
+    moduleloader=modprobe
+    local savemoduleinfo
+    savemoduleinfo=${1:-Yes} # So old compiled scripts still work
+    local uname
+    local extras
+
+    if ! qt mywhich modprobe; then
+	moduleloader=insmod
+    fi
+
+    if [ -n "$MODULESDIR" ]; then
+	case "$MODULESDIR" in
+	    +*)
+		extras="$MODULESDIR"
+		extras=${extras#+}
+		MODULESDIR=
+		;;
+	esac
+    fi
+
+    if [ -z "$MODULESDIR" ]; then
+	uname=$(uname -r)
+	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	if [ -n "$extras" ]; then
+	    for directory in $(split "$extras"); do
+		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
+	    done
+	fi
+    fi
+
+    for directory in $(split $MODULESDIR); do
+	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
+    done
+
+    [ -n "$LOAD_HELPERS_ONLY" ] && modules=$(find_file helpers) || modules=$(find_file modules)
+
+    if [ -f $modules -a -n "$moduledirectories" ]; then
+	[ -d /sys/module/ ] || MODULES=$(lsmod | cut -d ' ' -f1)
+	progress_message "Loading Modules..."
+	. $modules
+	if [ $savemoduleinfo = Yes ]; then
+	    [ -d ${VARDIR} ] || mkdir -p ${VARDIR}
+	    echo MODULESDIR="$MODULESDIR" > ${VARDIR}/.modulesdir
+	    cp -f $modules ${VARDIR}/.modules
+	fi
+    elif [ $savemoduleinfo = Yes ]; then
+	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}
+	> ${VARDIR}/.modulesdir
+	> ${VARDIR}/.modules
+    fi
+
+    MODULESDIR=$save_modules_dir
+}
+
+#
+#  Note: The following set of IP address manipulation functions have anomalous
+#        behavior when the shell only supports 32-bit signed arithmetic and
+#        the IP address is 128.0.0.0 or 128.0.0.1.
+#
+
+LEFTSHIFT='<<'
+
+#
+# Convert an IP address in dot quad format to an integer
+#
+decodeaddr() {
+    local x
+    local temp
+    temp=0
+    local ifs
+    ifs=$IFS
+
+    IFS=.
+
+    for x in $1; do
+	temp=$(( $(( $temp $LEFTSHIFT 8 )) | $x ))
+    done
+
+    echo $temp
+
+    IFS=$ifs
+}
+
+#
+# convert an integer to dot quad format
+#
+encodeaddr() {
+    addr=$1
+    local x
+    local y
+    y=$(($addr & 255))
+
+    for x in 1 2 3 ; do
+	addr=$(($addr >> 8))
+	y=$(($addr & 255)).$y
+    done
+
+    echo $y
+}
+
+#
+# Netmask from CIDR
+#
+ip_netmask() {
+    local vlsm
+    vlsm=${1#*/}
+
+    [ $vlsm -eq 0 ] && echo 0 || echo $(( -1 $LEFTSHIFT $(( 32 - $vlsm )) ))
+}
+
+#
+# Network address from CIDR
+#
+ip_network() {
+    local decodedaddr
+    decodedaddr=$(decodeaddr ${1%/*})
+    local netmask
+    netmask=$(ip_netmask $1)
+
+    echo $(encodeaddr $(($decodedaddr & $netmask)))
+}
+
+#
+# The following hack is supplied to compensate for the fact that many of
+# the popular light-weight Bourne shell derivatives don't support XOR ("^").
+#
+ip_broadcast() {
+    local x
+    x=$(( 32 - ${1#*/} ))
+
+    [ $x -eq 32 ] && echo -1 || echo $(( $(( 1 $LEFTSHIFT $x )) - 1 ))
+}
+
+#
+# Calculate broadcast address from CIDR
+#
+broadcastaddress() {
+    local decodedaddr
+    decodedaddr=$(decodeaddr ${1%/*})
+    local netmask
+    netmask=$(ip_netmask $1)
+    local broadcast
+    broadcast=$(ip_broadcast $1)
+
+    echo $(encodeaddr $(( $(($decodedaddr & $netmask)) | $broadcast )))
+}
+
+#
+# Test for network membership
+#
+in_network() # $1 = IP address, $2 = CIDR network
+{
+    local netmask
+    netmask=$(ip_netmask $2)
+    #
+    # Use string comparison to work around a broken BusyBox ash in OpenWRT
+    #
+    test $(( $(decodeaddr $1) & $netmask)) = $(( $(decodeaddr ${2%/*}) & $netmask ))
+}
+
+#
+# Query NetFilter about the existence of a filter chain
+#
+chain_exists() # $1 = chain name, $2 = table name (optional)
+{
+    qt1 $g_tool -t ${2:-filter} -L $1 -n
+}
+
+#
+# Find the interface with the passed MAC address
+#
+
+find_interface_by_mac() {
+    local mac
+    mac=$1
+    local first
+    local second
+    local rest
+    local dev
+
+    $IP link list | while read first second rest; do
+	case $first in
+	    *:)
+                dev=$second
+		;;
+	    *)
+	        if [ "$second" = $mac ]; then
+		    echo ${dev%:}
+		    return
+		fi
+	esac
+    done
+}
+
+#
+# Find interface address--returns the first IP address assigned to the passed
+# device
+#
+find_first_interface_address() # $1 = interface
+{
+    if [ $g_family -eq 4 ]; then
+	#
+	# get the line of output containing the first IP address
+	#
+	addr=$(${IP:-ip} -f inet addr show $1 2> /dev/null | grep 'inet .* global' | head -n1)
+	#
+	# If there wasn't one, bail out now
+	#
+	[ -n "$addr" ] || startup_error "Can't determine the IP address of $1"
+	#
+	# Strip off the trailing VLSM mask (or the peer IP in case of a P-t-P link)
+	# along with everything else on the line
+	#
+	echo $addr | sed 's/\s*inet //;s/\/.*//;s/ peer.*//'
+    else
+	#
+	# get the line of output containing the first IP address
+	#
+	addr=$(${IP:-ip} -f inet6 addr show dev $1 2> /dev/null | grep -F 'inet6 ' | grep -vF 'scope link' | head -n1)
+	#
+	# If there wasn't one, bail out now
+	#
+	[ -n "$addr" ] || startup_error "Can't determine the IPv6 address of $1"
+	#
+	# Strip off the trailing VLSM mask (or the peer IP in case of a P-t-P link)
+	# along with everything else on the line
+	#
+	echo $addr | sed 's/\s*inet6 //;s/\/.*//;s/ peer.*//'
+    fi
+}
+
+find_first_interface_address_if_any() # $1 = interface
+{
+    if [ $g_family -eq 4 ]; then
+	#
+	# get the line of output containing the first IP address
+	#
+	addr=$(${IP:-ip} -f inet addr show $1 2> /dev/null | grep 'inet .* global' | head -n1)
+	#
+	# Strip off the trailing VLSM mask (or the peer IP in case of a P-t-P link)
+	# along with everything else on the line
+	#
+	[ -n "$addr" ] && echo $addr | sed 's/\s*inet //;s/\/.*//;s/ peer.*//' || echo 0.0.0.0
+    else
+	#
+	# get the line of output containing the first IP address
+	#
+	addr=$(${IP:-ip} -f inet6 addr show dev $1 2> /dev/null | grep -F 'inet6 ' | grep -vF 'scope link' | head -n1)
+	#
+	# Strip off the trailing VLSM mask (or the peer IP in case of a P-t-P link)
+	# along with everything else on the line
+	#
+	[ -n "$addr" ] && echo $addr | sed 's/\s*inet6 //;s/\/.*//;s/ peer.*//' || echo ::
+    fi
+}
+
+#
+#Determines if the passed interface is a loopback interface
+#
+loopback_interface() { #$1 = Interface name
+    [ "$1" = lo ] || $IP link show $1 | fgrep -q LOOPBACK
+}
+
+#
+# Find Loopback Interfaces
+#
+find_loopback_interfaces() {
+    local interfaces
+
+    [ -x "$IP" ] && interfaces=$($IP link show | fgrep LOOPBACK | sed 's/://g' | cut -d ' ' -f 2)
+
+    [ -n "$interfaces" ] && echo $interfaces || echo lo
+}
+
+#
+# Internal version of 'which'
+#
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    echo $dir/$1
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+#
+# Find a File -- For relative file name, look in each ${CONFIG_PATH} then ${CONFDIR}
+#
+find_file()
+{
+    local saveifs
+    saveifs=
+    local directory
+
+    case $1 in
+	/*)
+	    echo $1
+	    ;;
+	*)
+	    for directory in $(split $CONFIG_PATH); do
+		if [ -f $directory/$1 ]; then
+		    echo $directory/$1
+		    return
+		fi
+	    done
+
+	    if [ -n "$g_shorewalldir" ]; then
+		echo ${g_shorewalldir}/$1
+	    else
+		echo ${g_confdir}/$1
+	    fi
+	    ;;
+    esac
+}
+
+#
+# Set the Shorewall state
+#
+set_state () # $1 = state
+{
+    if [ $# -gt 1 ]; then
+	echo "$1 $(date) from $2" > ${VARDIR}/state
+    else
+	echo "$1 $(date)" > ${VARDIR}/state
+    fi
+}
+
+#
+# Perform variable substitution on the passed argument and echo the result
+#
+expand() # $@ = contents of variable which may be the name of another variable
+{
+    eval echo \"$@\"
+}
+
+#
+# Function for including one file into another
+#
+INCLUDE() {
+    . $(find_file $(expand $@))
+}
+
+# Function to truncate a string -- It uses 'cut -b -<n>'
+# rather than ${v:first:last} because light-weight shells like ash and
+# dash do not support that form of expansion.
+#
+
+truncate() # $1 = length
+{
+    cut -b -${1}
+}
+
+#
+# Call this function to assert mutual exclusion with Shorewall. If you invoke the
+# /sbin/shorewall program while holding mutual exclusion, you should pass "nolock" as
+# the first argument. Example "shorewall nolock refresh"
+#
+# This function uses the lockfile utility from procmail if it exists.
+# Otherwise, it uses a somewhat race-prone algorithm to attempt to simulate the
+# behavior of lockfile.
+#
+mutex_on()
+{
+    local try
+    try=0
+    local lockf
+    lockf=${LOCKFILE:=${VARDIR}/lock}
+    local lockpid
+    local lockd
+
+    MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}
+
+    if [ $MUTEX_TIMEOUT -gt 0 ]; then
+
+	lockd=$(dirname $LOCKFILE)
+
+	[ -d "$lockd" ] || mkdir -p "$lockd"
+
+	if [ -f $lockf ]; then
+	    lockpid=`cat ${lockf} 2> /dev/null`
+	    if [ -z "$lockpid" -o $lockpid = 0 ]; then
+		rm -f ${lockf}
+		error_message "WARNING: Stale lockfile ${lockf} removed"
+	    elif [ $lockpid -eq $$ ]; then
+                return 0
+	    elif ! ps | grep -v grep | qt grep ${lockpid}; then
+		rm -f ${lockf}
+		error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
+	    fi
+	fi
+
+	if qt mywhich lockfile; then
+	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf}
+	    chmod u+w ${lockf}
+	    echo $$ > ${lockf}
+	    chmod u-w ${lockf}
+	elif qt mywhich lock; then
+            lock ${lockf}
+            chmod u=r ${lockf}
+	else
+	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
+		sleep 1
+		try=$((${try} + 1))
+	    done
+
+	    if  [ ${try} -lt ${MUTEX_TIMEOUT} ] ; then
+	        # Create the lockfile
+		echo $$ > ${lockf}
+	    else
+		echo "Giving up on lock file ${lockf}" >&2
+	    fi
+	fi
+    fi
+}
+
+#
+# Call this function to release mutual exclusion
+#
+mutex_off()
+{
+    [ -f ${CONFDIR}/rc.common ] && lock -u ${LOCKFILE:=${VARDIR}/lock}
+    rm -f ${LOCKFILE:=${VARDIR}/lock}
+}
+
--- a/Shorewall-core/lib.core
+++ b/Shorewall-core/lib.core
@@ -0,0 +1,440 @@
+#
+# Shorewall 5.1 -- /usr/share/shorewall/lib.core
+#
+#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# This library contains the code common to all Shorewall components except the
+# generated scripts.
+#
+
+SHOREWALL_LIBVERSION=50108
+
+#
+# Fatal Error
+#
+fatal_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 2
+}
+
+setup_product_environment() { # $1 = if non-empty, source shorewallrc again now that we have the correct product
+    g_basedir=${SHAREDIR}/shorewall
+
+    g_sharedir="$SHAREDIR"/$PRODUCT
+    g_confdir="$CONFDIR"/$PRODUCT
+
+    case $PRODUCT in
+	shorewall)
+	    g_product="Shorewall"
+	    g_family=4
+	    g_tool=iptables
+	    g_lite=
+	    ;;
+	shorewall6)
+	    g_product="Shorewall6"
+	    g_family=6
+	    g_tool=ip6tables
+	    g_lite=
+	    ;;
+	shorewall-lite)
+	    g_product="Shorewall Lite"
+	    g_family=4
+	    g_tool=iptables
+	    g_lite=Yes
+	    ;;
+	shorewall6-lite)
+	    g_product="Shorewall6 Lite"
+	    g_family=6
+	    g_tool=ip6tables
+	    g_lite=Yes
+	    ;;
+	*)
+	    fatal_error "Unknown PRODUCT ($PRODUCT)"
+	    ;;
+    esac
+
+    [ -f ${SHAREDIR}/${PRODUCT}/version ] || fatal_error "$g_product does not appear to be installed on this system"
+    #
+    # We need to do this again, now that we have the correct product
+    #
+    [ -n "$1" ] && . ${g_basedir}/shorewallrc
+
+    if [ -z "${VARLIB}" ]; then
+	VARLIB=${VARDIR}
+	VARDIR=${VARLIB}/${PRODUCT}
+    elif [ -z "${VARDIR}" ]; then
+	VARDIR="${VARLIB}/${PRODUCT}"
+    fi
+}
+
+set_default_product() {
+    case $(basename $0) in
+	shorewall6)
+	    PRODUCT=shorewall6
+	    ;;
+	shorewall4)
+	    PRODUCT=shorewall
+	    ;;
+	shorewall-lite)
+	    PRODUCT=shorewall-lite
+	    ;;
+	shorewall6-lite)
+	    PRODUCT=shorewall6-lite
+	    ;;
+	*)
+	    if [ -f ${g_basedir}/version ]; then
+		PRODUCT=shorewall
+	    elif [ -f ${SHAREDIR}/shorewall-lite/version ]; then
+		PRODUCT=shorewall-lite
+	    elif [ -f ${SHAREDIR}/shorewall6-lite/version ]; then
+		PRODUCT=shorewall6-lite
+	    else
+		fatal_error "No Shorewall firewall product is installed"
+	    fi
+	    ;;
+    esac
+}
+
+# Not configured Error
+#
+not_configured_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 6
+}
+
+#
+# Conditionally produce message
+#
+progress_message() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -gt 1 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+progress_message2() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -gt 0 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+progress_message3() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -ge 0 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+#
+# Undo the effect of 'separate_list()'
+#
+combine_list()
+{
+    local f
+    local o
+    o=
+
+    for f in $* ; do
+        o="${o:+$o,}$f"
+    done
+
+    echo $o
+}
+
+#
+# Validate an IP address
+#
+valid_address() {
+    local x
+    local y
+    local ifs
+    ifs=$IFS
+
+    IFS=.
+
+    for x in $1; do
+	case $x in
+	    [0-9]|[0-9][0-9]|[1-2][0-9][0-9])
+		[ $x -lt 256 ] || { IFS=$ifs; return 2; }
+                ;;
+	    *)
+	        IFS=$ifs
+		return 2
+		;;
+	esac
+    done
+
+    IFS=$ifs
+
+    return 0
+}
+
+#
+# Miserable Hack to work around broken BusyBox ash in OpenWRT
+#
+addr_comp() {
+    test $(bc <<EOF
+$1 > $2
+EOF
+) -eq 1
+
+}
+
+#
+# Enumerate the members of an IP range -- When using a shell supporting only
+# 32-bit signed arithmetic, the range cannot span 128.0.0.0.
+#
+# Comes in two flavors:
+#
+# ip_range() - produces a mimimal list of network/host addresses that spans
+#              the range.
+#
+# ip_range_explicit() - explicitly enumerates the range.
+#
+ip_range() {
+    local first
+    local last
+    local l
+    local x
+    local y
+    local z
+    local vlsm
+
+    case $1 in
+	!*)
+	    #
+	    # Let iptables complain if it's a range
+	    #
+	    echo $1
+	    return
+	    ;;
+	[0-9]*.*.*.*-*.*.*.*)
+            ;;
+	*)
+	    echo $1
+	    return
+	    ;;
+    esac
+
+    first=$(decodeaddr ${1%-*})
+    last=$(decodeaddr ${1#*-})
+
+    if addr_comp $first $last; then
+	fatal_error "Invalid IP address range: $1"
+    fi
+
+    l=$(( $last + 1 ))
+
+    while addr_comp $l $first; do
+	vlsm=
+	x=31
+	y=2
+	z=1
+
+	while [ $(( $first % $y )) -eq 0 ] && ! addr_comp $(( $first + $y )) $l; do
+	    vlsm=/$x
+	    x=$(( $x - 1 ))
+	    z=$y
+	    y=$(( $y * 2 ))
+	done
+
+	echo $(encodeaddr $first)$vlsm
+	first=$(($first + $z))
+    done
+}
+
+ip_range_explicit() {
+    local first
+    local last
+
+    case $1 in
+    [0-9]*.*.*.*-*.*.*.*)
+	;;
+    *)
+	echo $1
+	return
+	;;
+    esac
+
+    first=$(decodeaddr ${1%-*})
+    last=$(decodeaddr ${1#*-})
+
+    if addr_comp $first $last; then
+	fatal_error "Invalid IP address range: $1"
+    fi
+
+    while ! addr_comp $first $last; do
+	echo $(encodeaddr $first)
+	first=$(($first + 1))
+    done
+}
+
+[ -z "$LEFTSHIFT" ] && . ${g_basedir}/lib.common
+
+#
+# Netmask to VLSM
+#
+ip_vlsm() {
+    local mask
+    mask=$(decodeaddr $1)
+    local vlsm
+    vlsm=0
+    local x
+    x=$(( 128 << 24 )) # 0x80000000
+
+    while [ $(( $x & $mask )) -ne 0 ]; do
+	[ $mask -eq $x ] && mask=0 || mask=$(( $mask $LEFTSHIFT 1 )) # Not all shells shift 0x80000000 left properly.
+	vlsm=$(($vlsm + 1))
+    done
+
+    if [ $(( $mask & 2147483647 )) -ne 0 ]; then # 2147483647 = 0x7fffffff
+	echo "Invalid net mask: $1" >&2
+    else
+	echo $vlsm
+    fi
+}
+
+#
+# Set default config path
+#
+ensure_config_path() {
+    local F
+    F=${g_sharedir}/configpath
+    if [ -z "$CONFIG_PATH" ]; then
+	[ -f $F ] || { echo "   ERROR: $F does not exist"; exit 2; }
+	. $F
+    fi
+
+    if [ -n "$g_shorewalldir" ]; then
+	[ "${CONFIG_PATH%%:*}" = "$g_shorewalldir" ] || CONFIG_PATH=$g_shorewalldir:$CONFIG_PATH
+    fi
+}
+
+#
+# Get fully-qualified name of file
+#
+resolve_file() # $1 = file name
+{
+    local pwd
+    pwd=$PWD
+
+    case $1 in
+	/*)
+	    echo $1
+	    ;;
+	.)
+	    echo $pwd
+	    ;;
+	./*)
+	    echo ${pwd}${1#.}
+	    ;;
+	..)
+	    cd ..
+	    echo $PWD
+	    cd $pwd
+	    ;;
+	../*)
+	    cd ..
+	    resolve_file ${1#../}
+	    cd $pwd
+	    ;;
+	*)
+	    echo $pwd/$1
+	    ;;
+    esac
+}
+
+# Determine which version of mktemp is present (if any) and set MKTEMP accortingly:
+#
+#     None - No mktemp
+#     BSD  - BSD mktemp (Mandrake)
+#     STD  - mktemp.org mktemp
+#
+find_mktemp() {
+    local mktemp
+    mktemp=`mywhich mktemp 2> /dev/null`
+
+    if [ -n "$mktemp" ]; then
+	if qt mktemp -V ; then
+	    MKTEMP=STD
+	else
+	    MKTEMP=BSD
+	fi
+    else
+	MKTEMP=None
+    fi
+}
+
+#
+# create a temporary file. If a directory name is passed, the file will be created in
+# that directory. Otherwise, it will be created in a temporary directory.
+#
+mktempfile() {
+
+    [ -z "$MKTEMP" ] && find_mktemp
+
+    if [ $# -gt 0 ]; then
+	case "$MKTEMP" in
+	    BSD)
+		mktemp $1/shorewall.XXXXXX
+		;;
+	    STD)
+		mktemp -p $1 shorewall.XXXXXX
+		;;
+	    None)
+		> $1/shorewall-$$ && echo $1/shorewall-$$
+		;;
+	    *)
+		error_message "ERROR:Internal error in mktempfile"
+		;;
+	esac
+    else
+	case "$MKTEMP" in
+	    BSD)
+		mktemp ${TMPDIR:-/tmp}/shorewall.XXXXXX
+		;;
+	    STD)
+		mktemp -t shorewall.XXXXXX
+		;;
+	    None)
+		rm -f ${TMPDIR:-/tmp}/shorewall-$$
+		> ${TMPDIR:-}/shorewall-$$ && echo ${TMPDIR:-/tmp}/shorewall-$$
+		;;
+	    *)
+		error_message "ERROR:Internal error in mktempfile"
+		;;
+	esac
+    fi
+}
--- a/Shorewall-core/lib.installer
+++ b/Shorewall-core/lib.installer
@@ -0,0 +1,89 @@
+#
+#
+# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
+#
+#     (c) 2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# The purpose of this library is to hold those functions used by the products installer.
+#
+#########################################################################################
+
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+delete_file() # $1 = file to delete
+{
+    rm -f $1
+}
+
+require()
+{
+    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
+}
+
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir $1
+    chmod $2 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+}
+
+make_parent_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod $2 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNER:$GROUP $1
+}
+
+cant_autostart()
+{
+    echo
+    echo  "WARNING: Unable to configure $Product to start automatically at boot" >&2
+}
--- a/Shorewall-core/lib.uninstaller
+++ b/Shorewall-core/lib.uninstaller
@@ -0,0 +1,106 @@
+#
+#
+# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
+#
+#     (c) 2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# The purpose of this library is to hold those functions used by the products uninstaller.
+#
+#########################################################################################
+
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+remove_file() # $1 = file to remove
+{
+    if [ -n "$1" ] ; then
+        if [ -f $1 -o -L $1 ] ; then
+            rm -f $1
+            echo "$1 Removed"
+        fi
+    fi
+}
+
+remove_directory() # $1 = directory to remove
+{
+    if [ -n "$1" ] ; then
+        if [ -d $1 ] ; then
+            rm -rf $1
+            echo "$1 Removed"
+        fi
+    fi
+}
+
+remove_file_with_wildcard() # $1 = file with wildcard to remove
+{
+    if [ -n "$1" ] ; then
+        for f in $1; do
+            if [ -d $f ] ; then
+                rm -rf $f
+                echo "$f Removed"
+            elif [ -f $f -o -L $f ] ; then
+                rm -f $f
+                echo "$f Removed"
+            fi
+        done
+    fi
+}
+
+restore_file() # $1 = file to restore
+{
+    if [ -f ${1}-shorewall.bkout ]; then
+	if (mv -f ${1}-shorewall.bkout $1); then
+	    echo
+	    echo "$1 restored"
+        else
+	    exit 1
+        fi
+    fi
+}
--- a/Shorewall-core/manpages/shorewall.xml
+++ b/Shorewall-core/manpages/shorewall.xml
--- a/Shorewall-core/shorewall
+++ b/Shorewall-core/shorewall
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+#     Shorewall Packet Filtering Firewall Control Program - V5.1
+#
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015-2017
+#         Tom Eastep (teastep@shorewall.net)
+#
+#	Shorewall documentation is available at http://www.shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
+#
+################################################################################################
+#
+# Default product is Shorewall. PRODUCT will be set based on $0 and on passed -[46] and -l
+# options
+#
+PRODUCT=shorewall
+
+#
+# This is modified by the installer when ${SHAREDIR} != /usr/share
+#
+. /usr/share/shorewall/shorewallrc
+
+g_basedir=${SHAREDIR}/shorewall
+
+. ${g_basedir}/lib.cli
+
+shorewall_cli $@
--- a/Shorewall-core/shorewallrc.apple
+++ b/Shorewall-core/shorewallrc.apple
@@ -0,0 +1,22 @@
+#
+# Apple OS X Shorewall 5.0 rc file
+#
+BUILD=apple
+HOST=apple
+PREFIX=/usr                            #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share               #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share             #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall   #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                           #Directory where subsystem configurations are installed
+SBINDIR=/sbin                          #Directory where system administration programs are installed
+MANDIR=${SHAREDIR}/man                 #Directory where manpages are installed.
+INITDIR=                               #Unused on OS X
+INITFILE=                              #Unused on OS X
+INITSOURCE=                            #Unused on OS X
+ANNOTATED=                             #Unused on OS X
+SERVICEDIR=                            #Unused on OS X
+SERVICEFILE=                           #Unused on OS X
+SYSCONFDIR=                            #Unused on OS X
+SPARSE=Yes                             #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
+VARLIB=/var/lib                        #Unused on OS X
+DEFAULT_PAGER=			       #Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/shorewallrc.archlinux
+++ b/Shorewall-core/shorewallrc.archlinux
@@ -0,0 +1,23 @@
+#
+# Arch Linux Shorewall 5.0 rc file
+#
+BUILD=                                 #Default is to detect the build system
+HOST=archlinux
+PREFIX=/usr                            #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share               #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share             #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall   #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                           #Directory where subsystem configurations are installed
+SBINDIR=/usr/bin                       #Directory where system administration programs are installed
+MANDIR=${SHAREDIR}/man                 #Directory where manpages are installed.
+INITDIR=                               #Directory where SysV init scripts are installed.
+INITFILE=                              #Name of the product's installed SysV init script
+INITSOURCE=                            #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                             #If non-zero, annotated configuration files are installed
+SYSCONFDIR=                            #Directory where SysV init parameter files are installed
+SERVICEDIR=/usr/lib/systemd/system     #Directory where .service files are installed (systems running systemd only)
+SERVICEFILE=                           #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SPARSE=                                #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/var/lib                        #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT              #Directory where product variable data is stored.
+DEFAULT_PAGER=			       #Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/shorewallrc.cygwin
+++ b/Shorewall-core/shorewallrc.cygwin
@@ -0,0 +1,22 @@
+#
+# Cygwin Shorewall 5.0 rc file
+#
+BUILD=cygwin
+HOST=cygwin
+PREFIX=/usr                           #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share              #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share            #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall  #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                          #Directory where subsystem configurations are installed
+SBINDIR=/bin                          #Directory where system administration programs are installed
+MANDIR=${SHAREDIR}/man                #Directory where manpages are installed.
+INITDIR=/etc/init.d                   #Unused on Cygwin
+INITFILE=                             #Unused on Cygwin
+INITSOURCE=                           #Unused on Cygwin
+ANNOTATED=                            #Unused on Cygwin
+SERVICEDIR=                           #Unused on Cygwin
+SERVICEFILE=                          #Unused on Cygwin
+SYSCONFDIR=                           #Unused on Cygwin
+SPARSE=Yes                            #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
+VARLIB=/var/lib                       #Unused on Cygwin
+DEFAULT_PAGER=			      #Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/shorewallrc.debian.systemd
+++ b/Shorewall-core/shorewallrc.debian.systemd
@@ -0,0 +1,24 @@
+#
+# Debian Shorewall 5.0 rc file
+#
+BUILD=					#Default is to detect the build system
+HOST=debian
+PREFIX=/usr				#Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share		#Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share		#Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall	#Directory to install Shorewall Perl module directory
+CONFDIR=/etc				#Directory where subsystem configurations are installed
+SBINDIR=/sbin				#Directory where system administration programs are installed
+MANDIR=${PREFIX}/share/man		#Directory where manpages are installed.
+INITDIR=				#Directory where SysV init scripts are installed.
+INITFILE=				#Name of the product's installed SysV init script
+INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
+ANNOTATED=				#If non-zero, annotated configuration files are installed
+SYSCONFFILE=default.debian.systemd		#Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
+SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
+SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/var/lib				#Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT		#Directory where product variable data is stored.
+DEFAULT_PAGER=/usr/bin/less		#Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/shorewallrc.debian.sysvinit
+++ b/Shorewall-core/shorewallrc.debian.sysvinit
@@ -0,0 +1,24 @@
+#
+# Debian Shorewall 5.0 rc file
+#
+BUILD=                                  #Default is to detect the build system
+HOST=debian
+PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall    #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                            #Directory where subsystem configurations are installed
+SBINDIR=/sbin                           #Directory where system administration programs are installed
+MANDIR=${PREFIX}/share/man              #Directory where manpages are installed.
+INITDIR=/etc/init.d                     #Directory where SysV init scripts are installed.
+INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITSOURCE=init.debian.sh               #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                              #If non-zero, annotated configuration files are installed
+SYSCONFFILE=default.debian.sysvinit              #Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SYSCONFDIR=/etc/default                 #Directory where SysV init parameter files are installed
+SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
+SPARSE=Yes                              #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/var/lib                         #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=/usr/bin/less		#Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/shorewallrc.default
+++ b/Shorewall-core/shorewallrc.default
@@ -0,0 +1,24 @@
+#
+# Default Shorewall 5.0 rc file
+#
+BUILD=                                  #Default is to detect the build system
+HOST=linux                              #Generic Linux
+PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall    #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                            #Directory where subsystem configurations are installed
+SBINDIR=/sbin                           #Directory where system administration programs are installed
+MANDIR=${PREFIX}/man                    #Directory where manpages are installed.
+INITDIR=/etc/init.d                     #Directory where SysV init scripts are installed.
+INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITSOURCE=init.sh                      #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                              #If non-zero, annotated configuration files are installed
+SERVICEDIR=                             #Directory where .service files are installed (systems running systemd only)
+SERVICEFILE=                            #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SYSCONFFILE=                            #Name of the distributed file to be installed in $SYSCONFDIR
+SYSCONFDIR=                             #Directory where SysV init parameter files are installed
+SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/var/lib                         #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/shorewallrc.openwrt
+++ b/Shorewall-core/shorewallrc.openwrt
@@ -0,0 +1,24 @@
+#
+# OpenWRT Shorewall 5.0 rc file
+#
+BUILD=                                 #Default is to detect the build system
+HOST=openwrt
+PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall    #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                            #Directory where subsystem configurations are installed
+SBINDIR=/sbin                           #Directory where system administration programs are installed
+MANDIR=                                 #Directory where manpages are installed.
+INITDIR=/etc/init.d                     #Directory where SysV init scripts are installed.
+INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITSOURCE=init.openwrt.sh              #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                              #If non-zero, annotated configuration files are installed
+SYSCONFDIR=${CONFDIR}/sysconfig         #Directory where SysV init parameter files are installed
+SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
+SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/lib                             #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/shorewallrc.redhat
+++ b/Shorewall-core/shorewallrc.redhat
@@ -0,0 +1,24 @@
+#
+# RedHat/FedoraShorewall 5.0 rc file
+#
+BUILD=                                  #Default is to detect the build system
+HOST=redhat
+PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/libexec            #Directory for executable scripts.
+PERLLIBDIR=/usr/share/perl5/vendor_perl #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                            #Directory where subsystem configurations are installed
+SBINDIR=/sbin                           #Directory where system administration programs are installed
+MANDIR=${SHAREDIR}/man                  #Directory where manpages are installed.
+INITDIR=/etc/rc.d/init.d                #Directory where SysV init scripts are installed.
+INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITSOURCE=init.fedora.sh               #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                              #If non-zero, annotated configuration files are installed
+SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
+SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed as $SYSCONFDIR/$PRODUCT
+SERVICEFILE=                      	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter files are installed
+SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/var/lib                         #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/shorewallrc.slackware
+++ b/Shorewall-core/shorewallrc.slackware
@@ -0,0 +1,25 @@
+#
+# Slackware Shorewall 5.0 rc file
+#
+BUILD=slackware
+HOST=slackware
+PREFIX=/usr                                #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                   #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share                 #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall       #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                               #Directory where subsystem configurations are installed
+SBINDIR=/sbin                              #Directory where system administration programs are installed
+MANDIR=${PREFIX}/man                       #Directory where manpages are installed.
+INITDIR=/etc/rc.d                          #Directory where SysV init scripts are installed.
+AUXINITSOURCE=init.slackware.firewall.sh   #Name of the distributed file to be installed as the SysV init script
+AUXINITFILE=rc.firewall                    #Name of the product's installed SysV init script
+INITSOURCE=init.slackware.$PRODUCT.sh      #Name of the distributed file to be installed as a second SysV init script
+INITFILE=rc.$PRODUCT                       #Name of the product's installed second init script
+SERVICEDIR=                                #Name of the directory where .service files are installed (systems running systemd only)
+SERVICEFILE=                               #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SYSCONFFILE=                               #Name of the distributed file to be installed in $SYSCONFDIR
+SYSCONFDIR=                                #Name of the directory where SysV init parameter files are installed.
+ANNOTATED=                                 #If non-empty, install annotated configuration files
+VARLIB=/var/lib                            #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT                  #Directory where product variable data is stored.
+DEFAULT_PAGER=				   #Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/shorewallrc.suse
+++ b/Shorewall-core/shorewallrc.suse
@@ -0,0 +1,24 @@
+#
+# SuSE Shorewall 5.0 rc file
+#
+BUILD=                                                #Default is to detect the build system
+HOST=suse
+PREFIX=/usr                                           #Top-level directory for shared files, libraries, etc.
+CONFDIR=/etc                                          #Directory where subsystem configurations are installed
+SHAREDIR=${PREFIX}/share                              #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/lib                              #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/lib/perl5/site-perl              #Directory to install Shorewall Perl module directory
+SBINDIR=/usr/sbin                                     #Directory where system administration programs are installed
+MANDIR=${SHAREDIR}/man/                               #Directory where manpages are installed.
+INITDIR=/etc/init.d                                   #Directory where SysV init scripts are installed.
+INITFILE=                                             #Name of the product's SysV init script
+INITSOURCE=init.suse.sh                               #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                                            #If non-zero, annotated configuration files are installed
+SERVICEDIR=/usr/lib/systemd/system                    #Directory where .service files are installed (systems running systemd only)
+SERVICEFILE=$PRODUCT.service          		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SYSCONFFILE=sysconfig                                 #Name of the distributed file to be installed in $SYSCONFDIR
+SYSCONFDIR=/etc/sysconfig/                            #Directory where SysV init parameter files are installed
+SPARSE=                                               #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/var/lib                                       #Directory where persistent product data is stored.
+VARDIR=${VARLIB}/$PRODUCT                             #Directory where product variable data is stored.
+DEFAULT_PAGER=				   	      #Pager to use if none specified in shorewall[6].conf
--- a/Shorewall-core/uninstall.sh
+++ b/Shorewall-core/uninstall.sh
@@ -0,0 +1,141 @@
+#!/bin/sh
+#
+# Script to back uninstall Shoreline Firewall Core Modules
+#
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#
+#       Shorewall documentation is available at http://www.shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#    Usage:
+#
+#       You may only use this script to uninstall the version
+#       shown below. Simply run this script to remove Shorewall Firewall
+
+VERSION=xxx # The Build script inserts the actual version
+PRODUCT=shorewall-core
+Product="Shorewall Core"
+
+usage() # $1 = exit status
+{
+    ME=$(basename $0)
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    exit $1
+}
+
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
+#
+# Source common functions
+#
+. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
+#
+# Parse the run line
+#
+finished=0
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Uninstaller Version $VERSION"
+			exit 0
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
+
+#
+# Read the RC file
+#
+if [ $# -eq 0 ]; then
+    if [ -f ./shorewallrc ]; then
+        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+    elif [ -f ~/.shorewallrc ]; then
+        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+    elif [ -f /usr/share/shorewall/shorewallrc ]; then
+        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+    else
+	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
+    fi
+elif [ $# -eq 1 ]; then
+    file=$1
+    case $file in
+	/*|.*)
+	    ;;
+	*)
+	    file=./$file || exit 1
+	    ;;
+    esac
+
+    . $file || fatal_error "Can not load the RC file: $file"
+else
+    usage 1
+fi
+
+if [ -f ${SHAREDIR}/shorewall/coreversion ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall/coreversion)"
+    if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
+	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
+	echo "         and this is the $VERSION uninstaller."
+	VERSION="$INSTALLED_VERSION"
+    fi
+else
+    echo "WARNING: $Product Version $VERSION is not installed"
+    VERSION=""
+fi
+
+echo "Uninstalling $Product $VERSION"
+
+if [ -n "${MANDIR}" ]; then
+    remove_file_with_wildcard ${MANDIR}/man5/shorewall\*
+    remove_file_with_wildcard ${MANDIR}/man8/shorewall\*
+fi
+
+remove_directory ${SHAREDIR}/shorewall
+remove_file ~/.shorewallrc
+
+#
+# Report Success
+#
+echo "$Product $VERSION Uninstalled"
--- a/Shorewall-core/wait4ifup
+++ b/Shorewall-core/wait4ifup
@@ -2,17 +2,18 @@
 #
 #     Shorewall interface helper utility - V4.2
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 2007 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	This file is installed in /usr/share/shorewall/wait4ifup
 #
 #	Shorewall documentation is available at http://www.shorewall.net
 #
+#       This program is part of Shorewall.
+#
 #	This program is free software; you can redistribute it and/or modify
-#	it under the terms of Version 2 of the GNU General Public License
-#	as published by the Free Software Foundation.
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
 #
 #	This program is distributed in the hope that it will be useful,
 #	but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -20,8 +21,7 @@
 #	GNU General Public License for more details.
 #
 #	You should have received a copy of the GNU General Public License
-#	along with this program; if not, write to the Free Software
-#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 #	If an error occurs while starting or restarting the firewall, the
 #	firewall is automatically stopped.
@@ -33,7 +33,7 @@
 #

 interface_is_up() {
-    [ -n "$(ip link list dev $1 2> /dev/null | grep -e '[<,]UP[,>]')" ] 
+    [ -n "$(/sbin/ip link list dev $1 2> /dev/null | /bin/grep -e '[<,]UP[,>]')" ]
 }

 case $# in
@@ -51,10 +51,10 @@ esac

 while [ $timeout -gt 0 ]; do
    interface_is_up $1 && exit 0
-    sleep 1
+    /bin/sleep 1
    timeout=$(( $timeout - 1 ))
 done

 exit 1

-    
+
--- a/Shorewall-init/COPYING
+++ b/Shorewall-init/COPYING
@@ -0,0 +1,341 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                          51 Franklin Street, Fifth Floor,
+			  Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) 19yy  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
--- a/Shorewall-init/default.debian.systemd
+++ b/Shorewall-init/default.debian.systemd
@@ -0,0 +1,21 @@
+# List the Shorewall products that Shorewall-init is to
+# initialize (space-separated list).
+#
+# Sample: PRODUCTS="shorewall shorewall6"
+#
+PRODUCTS=""
+
+#
+# Set this to 1 if you want Shorewall-init to react to
+# ifup/ifdown and NetworkManager events
+#
+IFUPDOWN=0
+#
+# Where Up/Down events get logged
+#
+LOGFILE=/var/log/shorewall-ifupdown.log
+
+# Startup options - set verbosity to 0 (minimal reporting)
+OPTIONS="-V0"
+
+# IOF
--- a/Shorewall-init/default.debian.sysvinit
+++ b/Shorewall-init/default.debian.sysvinit
@@ -0,0 +1,27 @@
+# List the Shorewall products that Shorewall-init is to
+# initialize (space-separated list).
+#
+# Sample: PRODUCTS="shorewall shorewall6"
+#
+PRODUCTS=""
+
+#
+# Set this to 1 if you want Shorewall-init to react to
+# ifup/ifdown and NetworkManager events
+#
+IFUPDOWN=0
+#
+# Set this to the name of the file that is to hold
+# ipset contents. Shorewall-init will load those ipsets
+# during 'start' and will save them there during 'stop'.
+#
+SAVE_IPSETS=""
+#
+# Where Up/Down events get logged
+#
+LOGFILE=/var/log/shorewall-ifupdown.log
+
+# Startup options - set verbosity to 0 (minimal reporting)
+OPTIONS="-V0"
+
+# IOF
--- a/Shorewall-init/ifupdown.debian.sh
+++ b/Shorewall-init/ifupdown.debian.sh
@@ -0,0 +1,137 @@
+#!/bin/sh
+#
+# Debian ifupdown script for Shorewall-based products
+#
+#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+#     (c) 2010,2013 - Tom Eastep (teastep@shorewall.net)
+#
+#       Shorewall documentation is available at http://shorewall.net
+#
+#       This program is free software; you can redistribute it and/or modify
+#       it under the terms of Version 2 of the GNU General Public License
+#       as published by the Free Software Foundation.
+#
+#       This program is distributed in the hope that it will be useful,
+#       but WITHOUT ANY WARRANTY; without even the implied warranty of
+#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#       GNU General Public License for more details.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ ! -x $STATEDIR/firewall ]; then
+	if [ $PRODUCT = shorewall ]; then
+	    ${SBINDIR}/shorewall compile
+	elif [ $PRODUCT = shorewall6 ]; then
+	    ${SBINDIR}/shorewall -6 compile
+	fi
+    fi
+}
+
+Debian_ppp() {
+    NEWPRODUCTS=
+    INTERFACE="$1"
+
+    case $0 in
+	/etc/ppp/ip-*)
+	    #
+	    # IPv4
+	    #
+	    for product in $PRODUCTS; do
+		case $product in
+		    shorewall|shorewall-lite)
+			NEWPRODUCTS="$NEWPRODUCTS $product";
+			;;
+		esac
+	    done
+	    ;;
+	/etc/ppp/ipv6-*)
+	    #
+	    # IPv6
+	    #
+	    for product in $PRODUCTS; do
+		case $product in
+		    shorewall6|shorewall6-lite)
+			NEWPRODUCTS="$NEWPRODUCTS $product";
+			;;
+		esac
+	    done
+	    ;;
+	*)
+	    exit 0
+	    ;;
+    esac
+
+    PRODUCTS="$NEWPRODUCTS"
+
+    case $0 in
+	*up/*)
+	    COMMAND=up
+	    ;;
+	*)
+	    COMMAND=down
+	    ;;
+    esac
+}
+
+IFUPDOWN=0
+PRODUCTS=
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f /etc/default/shorewall-init ]; then
+    . /etc/default/shorewall-init
+elif [ -f /etc/sysconfig/shorewall-init ]; then
+    . /etc/sysconfig/shorewall-init
+fi
+
+[ "$IFUPDOWN" = 1 -a -n "$PRODUCTS" ] || exit 0
+
+case $0 in
+    /etc/ppp*)
+	#
+	# Debian ppp
+	#
+	Debian_ppp
+	;;
+    *)
+        #
+        # Debian ifupdown system
+        #
+	INTERFACE="$IFACE"
+
+	if [ "$MODE" = start ]; then
+	    COMMAND=up
+	elif [ "$MODE" = stop ]; then
+	    COMMAND=down
+	else
+	    exit 0
+	fi
+	;;
+esac
+
+[ -n "$LOGFILE" ] || LOGFILE=/dev/null
+
+for PRODUCT in $PRODUCTS; do
+    setstatedir
+
+    if [ -x $VARLIB/$PRODUCT/firewall ]; then
+	( ${VARLIB}/$PRODUCT/firewall -V0 $COMMAND $INTERFACE >> $LOGFILE 2>&1 ) || true
+    fi
+done
+
+exit 0
--- a/Shorewall-init/ifupdown.fedora.sh
+++ b/Shorewall-init/ifupdown.fedora.sh
@@ -0,0 +1,113 @@
+#!/bin/sh
+#
+# Redhat/Fedora/Centos/Foobar ifupdown script for Shorewall-based products
+#
+#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+#     (c) 2010,2013 - Tom Eastep (teastep@shorewall.net)
+#
+#       Shorewall documentation is available at http://shorewall.net
+#
+#       This program is free software; you can redistribute it and/or modify
+#       it under the terms of Version 2 of the GNU General Public License
+#       as published by the Free Software Foundation.
+#
+#       This program is distributed in the hope that it will be useful,
+#       but WITHOUT ANY WARRANTY; without even the implied warranty of
+#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#       GNU General Public License for more details.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+
+# Get startup options (override default)
+OPTIONS=
+
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ ! -x $STATEDIR/firewall ]; then
+	if [ $PRODUCT = shorewall ]; then
+	    ${SBINDIR}/shorewall compile
+	elif [ $PRODUCT = shorewall6 ]; then
+	    ${SBINDIR}/shorewall -6 compile
+	fi
+    fi
+}
+
+IFUPDOWN=0
+PRODUCTS=
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f /etc/default/shorewall-init ]; then
+    . /etc/default/shorewall-init
+elif [ -f /etc/sysconfig/shorewall-init ]; then
+    . /etc/sysconfig/shorewall-init
+fi
+
+[ "$IFUPDOWN" = 1 -a -n "$PRODUCTS" ] || exit 0
+
+PHASE=''
+
+case $0 in
+    /etc/ppp*)
+	INTERFACE="$1"
+
+	case $0 in
+	    *ip-up.local)
+		COMMAND=up
+		;;
+	    *ip-down.local)
+		COMMAND=down
+		;;
+	    *)
+		exit 0
+		;;
+	esac
+	;;
+    *)
+	#
+	# RedHat ifup/down system
+	#
+	INTERFACE="$1"
+    
+	case $0 in 
+	    *ifup*)
+		COMMAND=up
+		;;
+	    *ifdown*)
+		COMMAND=down
+		;;
+	    *dispatcher.d*)
+		COMMAND="$2"
+		;;
+	    *)
+		exit 0
+		;;
+	esac
+	;;
+esac
+
+[ -n "$LOGFILE" ] || LOGFILE=/dev/null
+
+for PRODUCT in $PRODUCTS; do
+    setstatedir
+
+    if [ -x "$STATEDIR/firewall" ]; then
+	  echo "`date --rfc-3339=seconds` $0: Executing $STATEDIR/firewall $OPTIONS $COMMAND $INTERFACE" >> $LOGFILE 2>&1
+	  ( $STATEDIR/firewall $OPTIONS $COMMAND $INTERFACE >> $LOGFILE 2>&1 ) || true
+    fi
+done
+
+exit 0
--- a/Shorewall-init/ifupdown.suse.sh
+++ b/Shorewall-init/ifupdown.suse.sh
@@ -0,0 +1,148 @@
+#!/bin/sh
+#
+# SuSE ifupdown script for Shorewall-based products
+#
+#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+#     (c) 2010,2013 - Tom Eastep (teastep@shorewall.net)
+#
+#       Shorewall documentation is available at http://shorewall.net
+#
+#       This program is free software; you can redistribute it and/or modify
+#       it under the terms of Version 2 of the GNU General Public License
+#       as published by the Free Software Foundation.
+#
+#       This program is distributed in the hope that it will be useful,
+#       but WITHOUT ANY WARRANTY; without even the implied warranty of
+#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#       GNU General Public License for more details.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ ! -x $STATEDIR/firewall ]; then
+	if [ $PRODUCT = shorewall ]; then
+	    ${SBINDIR}/shorewall compile
+	elif [ $PRODUCT = shorewall6 ]; then
+	    ${SBINDIR}/shorewall -6 compile
+	fi
+    fi
+}
+
+SuSE_ppp() {
+    NEWPRODUCTS=
+    INTERFACE="$1"
+
+    case $0 in
+	/etc/ppp/ip-*)
+	    #
+	    # IPv4
+	    #
+	    for product in $PRODUCTS; do
+		case $product in
+		    shorewall|shorewall-lite)
+			NEWPRODUCTS="$NEWPRODUCTS $product";
+			;;
+		esac
+	    done
+	    ;;
+	/etc/ppp/ipv6-*)
+	    #
+	    # IPv6
+	    #
+	    for product in $PRODUCTS; do
+		case $product in
+		    shorewall6|shorewall6-lite)
+			NEWPRODUCTS="$NEWPRODUCTS $product";
+			;;
+		esac
+	    done
+	    ;;
+	*)
+	    exit 0
+	    ;;
+    esac
+
+    PRODUCTS="$NEWPRODUCTS"
+
+    case $0 in
+	*up/*)
+	    COMMAND=up
+	    ;;
+	*)
+	    COMMAND=down
+	    ;;
+    esac
+}
+
+IFUPDOWN=0
+PRODUCTS=
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f /etc/default/shorewall-init ]; then
+    . /etc/default/shorewall-init
+elif [ -f /etc/sysconfig/shorewall-init ]; then
+    . /etc/sysconfig/shorewall-init
+fi
+
+[ "$IFUPDOWN" = 1 -a -n "$PRODUCTS" ] || exit 0
+
+PHASE=''
+
+case $0 in
+    /etc/ppp*)
+        #
+	# SUSE ppp
+	#
+	SuSE_ppp
+	;;
+	
+    *)
+        #
+        # SuSE ifupdown system
+        #
+	INTERFACE="$2"
+
+	case $0 in
+	    *dispatcher.d*)
+		INTERFACE="$1"
+		COMMAND="$2"
+		;;
+	    *if-up.d*)
+		COMMAND=up
+		;;
+	    *if-down.d*)
+		COMMAND=down
+		;;
+	    *)
+		exit 0
+		;;
+	esac
+	;;
+esac
+
+[ -n "$LOGFILE" ] || LOGFILE=/dev/null
+
+for PRODUCT in $PRODUCTS; do
+    setstatedir
+
+    if [ -x $VARLIB/$PRODUCT/firewall ]; then
+	  ( ${VARLIB}/$PRODUCT/firewall -V0 $COMMAND $INTERFACE >> $LOGFILE 2>&1 ) || true
+    fi
+done
+
+exit 0
--- a/Shorewall-init/init.debian.sh
+++ b/Shorewall-init/init.debian.sh
@@ -0,0 +1,188 @@
+#!/bin/sh
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#
+#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+#     (c) 2010,2012 - Tom Eastep (teastep@shorewall.net)
+#
+#       On most distributions, this file should be called /etc/init.d/shorewall.
+#
+#       Complete documentation is available at http://shorewall.net
+#
+#       This program is free software; you can redistribute it and/or modify
+#       it under the terms of Version 2 of the GNU General Public License
+#       as published by the Free Software Foundation.
+#
+#       This program is distributed in the hope that it will be useful,
+#       but WITHOUT ANY WARRANTY; without even the implied warranty of
+#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#       GNU General Public License for more details.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+### BEGIN INIT INFO
+# Provides:          shorewall-init
+# Required-Start:    $local_fs
+# X-Start-Before:    $network
+# Required-Stop:     $local_fs
+# X-Stop-After:      $network
+# Default-Start:     S
+# Default-Stop:      0 1 6
+# Short-Description: Initialize the firewall at boot time
+# Description:       Place the firewall in a safe state at boot time prior to
+#                    bringing up the network
+### END INIT INFO
+
+. /lib/lsb/init-functions
+
+export VERBOSITY=0
+
+if [ "$(id -u)" != "0" ]
+then
+  echo "You must be root to start, stop or restart \"Shorewall \"."
+  exit 1
+fi
+
+echo_notdone () {
+  echo "not done."
+  exit 1
+}
+
+not_configured () {
+    echo "#### WARNING ####"
+    echo "the firewall won't be initialized unless it is configured"
+    if [ "$1" != "stop" ]
+    then
+	echo ""
+	echo "Please read about Debian specific customization in"
+	echo "/usr/share/doc/shorewall-init/README.Debian.gz."
+    fi
+    echo "#################"
+    exit 0
+}
+
+# set the STATEDIR variable
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
+    else
+	return 0
+    fi
+}
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+# check if shorewall-init is configured or not
+if [ -f "$SYSCONFDIR/shorewall-init" ]
+then
+    . $SYSCONFDIR/shorewall-init
+    if [ -z "$PRODUCTS" ]
+    then
+	not_configured
+    fi
+else
+    not_configured
+fi
+
+# Initialize the firewall
+shorewall_start () {
+  local PRODUCT
+  local STATEDIR
+
+  printf "Initializing \"Shorewall-based firewalls\": "
+
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+              #
+	      # Run in a sub-shell to avoid name collisions
+	      #
+	      (
+		  if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		      ${STATEDIR}/firewall ${OPTIONS} stop
+		  fi
+	      )
+	  fi
+      fi
+  done
+
+  echo "done."
+
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+
+      printf "Restoring ipsets: "
+
+      if ! ipset -R < "$SAVE_IPSETS"; then
+	  echo_notdone
+      fi
+
+      echo "done."
+  fi
+
+  return 0
+}
+
+# Clear the firewall
+shorewall_stop () {
+  local PRODUCT
+  local STATEDIR
+
+  printf "Clearing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
+      fi
+  done
+
+  echo "done."
+
+  if [ -n "$SAVE_IPSETS" ]; then
+
+      echo "Saving ipsets: "
+
+      mkdir -p $(dirname "$SAVE_IPSETS")
+      if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+      else
+	  rm -f "${SAVE_IPSETS}.tmp"
+	  echo_notdone
+      fi
+
+      echo "done."
+  fi
+
+  return 0
+}
+
+case "$1" in
+  start)
+     shorewall_start
+     ;;
+  stop)
+     shorewall_stop
+     ;;
+  reload|force-reload)
+     ;;
+  *)
+     echo "Usage: $0 {start|stop|reload|force-reload}"
+     exit 1
+esac
+
+exit 0
--- a/Shorewall-init/init.fedora.sh
+++ b/Shorewall-init/init.fedora.sh
@@ -0,0 +1,170 @@
+#! /bin/bash
+#
+# chkconfig: - 09 91
+# description: Initialize the shorewall firewall at boot time
+#
+### BEGIN INIT INFO
+# Provides: shorewall-init
+# Required-Start: $local_fs
+# Required-Stop:  $local_fs
+# Default-Start:
+# Default-Stop:	  0 1 2 3 4 5 6
+# Short-Description: Initialize the shorewall firewall at boot time
+# Description:       Place the firewall in a safe state at boot time
+#                    prior to bringing up the network.  
+### END INIT INFO
+#determine where the files were installed
+
+. /usr/share/shorewall/shorewallrc
+
+prog="shorewall-init"
+logger="logger -i -t $prog"
+lockfile="/var/lock/subsys/shorewall-init"
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Get startup options (override default)
+OPTIONS=
+
+# check if shorewall-init is configured or not
+if [ -f "/etc/sysconfig/shorewall-init" ]; then
+    . /etc/sysconfig/shorewall-init
+else
+    echo "/etc/sysconfig/shorewall-init not found"
+    exit 6
+fi
+
+# set the STATEDIR variable
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
+    else
+	return 0
+    fi
+}
+
+# Initialize the firewall
+start () {
+    local PRODUCT
+    local STATEDIR
+
+    if [ -z "$PRODUCTS" ]; then
+	echo "No firewalls configured for shorewall-init"
+	failure
+	return 6 #Not configured
+    fi
+
+    printf "Initializing \"Shorewall-based firewalls\": "
+
+    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+	ipset -R < "$SAVE_IPSETS"
+    fi
+
+    for PRODUCT in $PRODUCTS; do
+	setstatedir
+	retval=$?
+
+	if [ $retval -eq 0 ]; then
+	    if [ -x "${STATEDIR}/firewall" ]; then
+		${STATEDIR}/firewall ${OPTIONS} stop 2>&1 | $logger
+		retval=${PIPESTATUS[0]}
+		[ $retval -ne 0 ] && break
+	    else
+		retval=6 #Product not configured
+		break
+	    fi
+	else
+	    break
+	fi
+    done
+
+    if [ $retval -eq 0 ]; then
+	touch $lockfile 
+	success
+    else
+	failure
+    fi
+    echo
+    return $retval
+}
+
+# Clear the firewall
+stop () {
+    local PRODUCT
+    local STATEDIR
+
+    printf "Clearing \"Shorewall-based firewalls\": "
+
+    for PRODUCT in $PRODUCTS; do
+	setstatedir
+	retval=$?
+
+	if [ $retval -eq 0 ]; then
+	    if [ -x "${STATEDIR}/firewall" ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | $logger
+		retval=${PIPESTATUS[0]}
+		[ $retval -ne 0 ] && break
+	    else
+		retval=6 #Product not configured
+		break
+	    fi
+	else
+	    break
+	fi
+    done
+
+    if [ $retval -eq 0 ]; then
+	if [ -n "$SAVE_IPSETS" ]; then
+	    mkdir -p $(dirname "$SAVE_IPSETS")
+	    if ipset -S > "${SAVE_IPSETS}.tmp"; then
+		grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	    else
+		rm -f "${SAVE_IPSETS}.tmp"
+	    fi
+	fi
+
+	rm -f $lockfile
+	success
+    else
+	failure
+    fi
+    echo
+    return $retval
+}
+
+status_q() {
+    status > /dev/null 2>&1
+}
+
+case "$1" in
+    start)
+	status_q && exit 0
+	$1
+	;;
+    stop)
+	status_q || exit 0
+	$1
+	;;
+    restart|reload|force-reload|condrestart|try-restart)
+	echo "Not implemented"
+	exit 3
+	;;
+    status)
+	status $prog
+	;;
+  *)
+	echo "Usage: $0 {start|stop|status}"
+	exit 1
+esac
+
+exit 0
--- a/Shorewall-init/init.openwrt.sh
+++ b/Shorewall-init/init.openwrt.sh
@@ -0,0 +1,135 @@
+#!/bin/sh /etc/rc.common
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#
+#     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)
+#
+#       On most distributions, this file should be called /etc/init.d/shorewall-init.
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+#
+
+# arg1 of init script is arg2 when rc.common is sourced
+
+case "$action" in
+  start|stop|boot)
+      if [ "$(id -u)" != "0" ]
+      then
+	  echo "You must be root to start, stop or restart \"Shorewall \"."
+	  exit 1
+      fi
+
+      # check if shorewall-init is configured or not
+      if [ -f "/etc/sysconfig/shorewall-init" ]
+      then
+	  . /etc/sysconfig/shorewall-init
+	  if [ -z "$PRODUCTS" ]
+	  then
+	      exit 0
+	  fi
+      else
+	  exit 0
+      fi
+
+      ;;
+  enable|disable|enabled)
+      # Openwrt related
+      # start and stop runlevel variable
+      START=19
+      STOP=91
+      ;;
+  *)
+      echo "Usage: /etc/init.d/shorewall-init {start|stop}"
+      exit 1
+esac
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+# Locate the current PRODUCT's statedir
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . ${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
+    else
+	return 0
+    fi
+}
+
+# Initialize the firewall
+start () {
+    local PRODUCT
+  local STATEDIR
+
+  printf "Initializing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
+	  fi
+      fi
+  done
+
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+      ipset -R < "$SAVE_IPSETS"
+  fi
+}
+
+boot () {
+    start
+}
+
+# Clear the firewall
+stop () {
+    local PRODUCT
+    local STATEDIR
+
+    printf "Clearing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
+	fi
+    done
+
+    if [ -n "$SAVE_IPSETS" ]; then
+	mkdir -p $(dirname "$SAVE_IPSETS")
+	if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	else
+	    rm -f "${SAVE_IPSETS}.tmp"
+	fi
+    fi
+}
+
--- a/Shorewall-init/init.sh
+++ b/Shorewall-init/init.sh
@@ -0,0 +1,140 @@
+#! /bin/bash
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#
+#     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
+#
+#       On most distributions, this file should be called /etc/init.d/shorewall.
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# chkconfig: - 09 91
+#
+### BEGIN INIT INFO
+# Provides: shorewall-init
+# Required-start: $local_fs
+# Required-stop:  $local_fs
+# Default-Start:  2 3 5
+# Default-Stop:   6
+# Short-Description: Initialize the firewall at boot time
+# Description:       Place the firewall in a safe state at boot time
+#                    prior to bringing up the network.  
+### END INIT INFO
+
+if [ "$(id -u)" != "0" ]
+then
+  echo "You must be root to start, stop or restart \"Shorewall \"."
+  exit 1
+fi
+
+# check if shorewall-init is configured or not
+if [ -f "/etc/sysconfig/shorewall-init" ]
+then
+	. /etc/sysconfig/shorewall-init
+	if [ -z "$PRODUCTS" ]
+	then
+		exit 0
+	fi
+else
+	exit 0
+fi
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+# Locate the current PRODUCT's statedir
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
+    else
+	return 0
+    fi
+}
+
+# Initialize the firewall
+shorewall_start () {
+  local PRODUCT
+  local STATEDIR
+
+  printf "Initializing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
+	  fi
+      fi
+  done
+
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+      ipset -R < "$SAVE_IPSETS"
+  fi
+
+  return 0
+}
+
+# Clear the firewall
+shorewall_stop () {
+  local PRODUCT
+  local STATEDIR
+
+  printf "Clearing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
+      fi
+  done
+
+  if [ -n "$SAVE_IPSETS" ]; then
+      mkdir -p $(dirname "$SAVE_IPSETS")
+      if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+      else
+	  rm -f "${SAVE_IPSETS}.tmp"
+      fi
+  fi
+
+  return 0
+}
+
+case "$1" in
+  start)
+     shorewall_start
+     ;;
+  stop)
+     shorewall_stop
+     ;;
+  *)
+     echo "Usage: /etc/init.d/shorewall-init {start|stop}"
+     exit 1
+esac
+
+exit 0
--- a/Shorewall-init/init.suse.sh
+++ b/Shorewall-init/init.suse.sh
@@ -0,0 +1,151 @@
+#! /bin/bash
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#
+#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+#     (c) 2010,2012 - Tom Eastep (teastep@shorewall.net)
+#
+#       On most distributions, this file should be called /etc/init.d/shorewall.
+#
+#       Complete documentation is available at http://shorewall.net
+#
+#       This program is free software; you can redistribute it and/or modify
+#       it under the terms of Version 2 of the GNU General Public License
+#       as published by the Free Software Foundation.
+#
+#       This program is distributed in the hope that it will be useful,
+#       but WITHOUT ANY WARRANTY; without even the implied warranty of
+#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#       GNU General Public License for more details.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+#
+### BEGIN INIT INFO
+# Provides: shorewall-init
+# Required-Start: $local_fs
+# Required-Stop:  $local_fs
+# Default-Start:  2 3 5
+# Default-Stop:   0 1 6
+# Short-Description: Initialize the firewall at boot time
+# Description:       Place the firewall in a safe state at boot time
+#                    prior to bringing up the network.  
+### END INIT INFO
+
+#Return values acc. to LSB for all commands but status:
+# 0 - success
+# 1 - generic or unspecified error
+# 2 - invalid or excess argument(s)
+# 3 - unimplemented feature
+# 4 - insufficient privilege
+# 5 - program is not installed
+# 6 - program is not configured
+# 7 - program is not running
+
+if [ "$(id -u)" != "0" ]
+then
+  echo "You must be root to start, stop or restart \"Shorewall \"."
+  exit 4
+fi
+
+# check if shorewall-init is configured or not
+if [ -f "/etc/sysconfig/shorewall-init" ]
+then
+    . /etc/sysconfig/shorewall-init
+
+    if [ -z "$PRODUCTS" ]
+    then
+	echo "No PRODUCTS configured"
+	exit 6
+    fi
+else
+    echo "/etc/sysconfig/shorewall-init not found"
+    exit 6
+fi
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+# set the STATEDIR variable
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
+    else
+	return 0
+    fi
+}
+
+# Initialize the firewall
+shorewall_start () {
+  local PRODUCT
+  local STATEDIR
+
+  printf "Initializing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x $STATEDIR/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
+	      fi
+	  fi
+      fi
+  done
+
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+      ipset -R < "$SAVE_IPSETS"
+  fi
+}
+
+# Clear the firewall
+shorewall_stop () {
+  local PRODUCT
+  local STATEDIR
+
+  printf "Clearing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
+      fi
+  done
+
+  if [ -n "$SAVE_IPSETS" ]; then
+      mkdir -p $(dirname "$SAVE_IPSETS")
+      if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+      else
+	  rm -f "${SAVE_IPSETS}.tmp"
+      fi
+  fi
+}
+
+case "$1" in
+    start)
+	shorewall_start
+	;;
+    stop)
+	shorewall_stop
+	;;
+    reload|forced-reload)
+	;;
+    *)
+	echo "Usage: /etc/init.d/shorewall-init {start|stop}"
+	exit 1
+	;;
+esac
+
+exit 0
--- a/Shorewall-init/install.sh
+++ b/Shorewall-init/install.sh
@@ -0,0 +1,577 @@
+#!/bin/sh
+#
+# Script to install Shoreline Firewall Init
+#
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010 - Roberto C. Sanchez (roberto@connexer.com)
+#
+#       Shorewall documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+
+VERSION=xxx # The Build script inserts the actual version
+PRODUCT=shorewall-init
+Product="Shorewall Init"
+
+usage() # $1 = exit status
+{
+    ME=$(basename $0)
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
+    exit $1
+}
+
+install_file() # $1 = source $2 = target $3 = mode
+{
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
+}
+
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
+#
+# Source common functions
+#
+. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
+#
+# Parse the run line
+#
+
+finished=0
+configure=1
+
+while [ $finished -eq 0 ] ; do
+    option="$1"
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
+
+#
+# Read the RC file
+#
+if [ $# -eq 0 ]; then
+    if [ -f ./shorewallrc ]; then
+	file=./shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    elif [ -f ~/.shorewallrc ]; then
+	file=~/.shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    elif [ -f /usr/share/shorewall/shorewallrc ]; then
+	file=/usr/share/shorewall/shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    else
+	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
+    fi
+elif [ $# -eq 1 ]; then
+    file=$1
+    case $file in
+	/*|.*)
+	    ;;
+	*)
+	    file=./$file || exit 1
+	    ;;
+    esac
+
+    . $file || fatal_error "Can not load the RC file: $file"
+else
+    usage 1
+fi
+
+if [ -z "${VARLIB}" ]; then
+    VARLIB=${VARDIR}
+    VARDIR=${VARLIB}/${PRODUCT}
+elif [ -z "${VARDIR}" ]; then
+    VARDIR=${VARLIB}/${PRODUCT}
+fi
+
+for var in SHAREDIR LIBEXECDIR CONFDIR SBINDIR VARLIB VARDIR; do
+    require $var
+done
+
+[ -n "$SANDBOX" ] && configure=0
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
+
+[ $configure -eq 1 ] && ETC=/etc || ETC="${CONFDIR}"
+
+if [ -z "$BUILD" ]; then
+    case $(uname) in
+	cygwin*)
+	    BUILD=cygwin
+	    ;;
+	Darwin)
+	    BUILD=apple
+	    ;;
+	*)
+	    if [ -f /etc/os-release ]; then
+		eval $(cat /etc/os-release | grep ^ID=)
+
+		case $ID in
+		    fedora|rhel|centos|foobar)
+			BUILD=redhat
+			;;
+		    debian|ubuntu)
+			BUILD=debian
+			;;
+		    opensuse)
+			BUILD=suse
+			;;
+		    *)
+			BUILD="$ID"
+			;;
+		esac
+	    elif [ -f /etc/debian_version ]; then
+		BUILD=debian
+	    elif [ -f /etc/ubuntu_version ]; then
+		BUILD=debian
+	    elif [ -f /etc/gentoo-release ]; then
+		BUILD=gentoo
+	    elif [ -f /etc/redhat-release ]; then
+		BUILD=redhat
+	    elif [ -f /etc/SuSE-release ]; then
+		BUILD=suse
+	    elif [ -f /etc/slackware-version ] ; then
+		BUILD=slackware
+	    elif [ -f /etc/arch-release ] ; then
+		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ]; then
+		BUILD=openwrt
+	    else
+		BUILD=linux
+	    fi
+	    ;;
+    esac
+fi
+
+case $BUILD in
+    apple)
+	[ -z "$OWNER" ] && OWNER=root
+	[ -z "$GROUP" ] && GROUP=wheel
+	;;
+    cygwin*|CYGWIN*)
+	OWNER=$(id -un)
+	GROUP=$(id -gn)
+ 	;;
+    *)
+	if [ $(id -u) -eq 0 ]; then
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
+	;;
+esac
+
+[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
+
+[ -n "$HOST" ] || HOST=$BUILD
+
+case "$HOST" in
+    debian)
+	echo "Installing Debian-specific configuration..."
+	;;
+    gentoo)
+	echo "Installing Gentoo-specific configuration..."
+	;;
+    redhat)
+	echo "Installing Redhat/Fedora-specific configuration..."
+	;;
+    slackware)
+	echo "Shorewall-init is currently not supported on Slackware" >&2
+	exit 1
+	;;
+    archlinux)
+	echo "Shorewall-init is currently not supported on Arch Linux" >&2
+	exit 1
+	;;
+    suse)
+	echo "Installing SuSE-specific configuration..."
+	;;
+    openwrt)
+	echo "Installing Openwrt-specific configuration..."
+	;;
+    linux)
+	fatal_error "Shorewall-init is not supported on this system"
+	;;
+    *)
+	fatal_error "Unsupported HOST distribution: \"$HOST\""
+	;;
+esac
+
+[ -z "$TARGET" ] && TARGET=$HOST
+
+if [ -n "$DESTDIR" ]; then
+    if [ $(id -u) != 0 ] ; then
+	echo "Not setting file owner/group permissions, not running as root."
+	OWNERSHIP=""
+    fi
+    
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
+fi
+
+echo "Installing $Product Version $VERSION"
+
+#
+# Check for /usr/share/shorewall-init/version
+#
+if [ -f ${DESTDIR}${SHAREDIR}/$PRODUCT/version ]; then
+    first_install=""
+else
+    first_install="Yes"
+fi
+
+[ -n "$DESTDIR" ] && make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
+
+#
+# Install the Firewall Script
+#
+if [ -n "$INITFILE" ]; then
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    install_file $INITSOURCE ${DESTDIR}${INITDIR}/$INITFILE 0544
+    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${INITDIR}/$INITFILE
+    
+    if [ -n "${AUXINITSOURCE}" ]; then
+	install_file $INITSOURCE ${DESTDIR}${INITDIR}/$AUXINITFILE 0544
+    fi
+
+    echo  "SysV init script $INITSOURCE installed in ${DESTDIR}${INITDIR}/$INITFILE"
+fi
+
+#
+# Install the .service file
+#
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
+
+if [ -n "$SERVICEDIR" ]; then
+    make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+    [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
+    [ -n "$DESTDIR" -o $configure -eq 0 ] && make_parent_directory ${DESTDIR}${SBINDIR} 0755
+    install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0700
+    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
+    echo "CLI installed as ${DESTDIR}${SBINDIR}/$PRODUCT"
+fi
+
+#
+# Create /usr/share/shorewall-init if needed
+#
+make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
+
+#
+# Install logrotate file
+#
+if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
+    echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
+fi
+
+#
+# Create the version file
+#
+echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/$PRODUCT/version
+chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
+
+#
+# Remove and create the symbolic link to the init script
+#
+if [ -z "$DESTDIR" ]; then
+    rm -f ${SHAREDIR}/$PRODUCT/init
+    ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
+fi
+
+if [ $HOST = debian ]; then
+    if [ -n "${DESTDIR}" ]; then
+	make_parent_directory ${DESTDIR}${ETC}/network/if-up.d 0755
+	make_parent_directory ${DESTDIR}${ETC}/network/if-down.d 0755
+	make_parent_directory ${DESTDIR}${ETC}/network/if-post-down.d 0755
+    elif [ $configure -eq 0 ]; then
+	make_parent_directory ${DESTDIR}${CONFDIR}/network/if-up.d 0755
+	make_parent_directory ${DESTDIR}${CONFDIR}/network/if-down.d 0755
+	make_parent_directory ${DESTDIR}${CONFDIR}/network/if-post-down.d 0755
+    fi
+
+    if [ ! -f ${DESTDIR}${CONFDIR}/default/$PRODUCT ]; then
+	[ -n "${DESTDIR}" ] && make_parent_directory ${DESTDIR}${ETC}/default 0755
+
+	[ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/default 0755
+	install_file ${SYSCONFFILE} ${DESTDIR}${ETC}/default/$PRODUCT 0644
+	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+    fi
+
+    IFUPDOWN=ifupdown.debian.sh
+else
+    if [ -n "$DESTDIR" ]; then
+	make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+
+	if [ -z "$RPM" ]; then
+	    if [ $HOST = suse ]; then
+		make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-up.d 0755
+		make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-down.d 0755
+	    elif [ $HOST = gentoo ]; then
+		# Gentoo does not support if-{up,down}.d
+		/bin/true
+	    elif [ $HOST = openwrt ]; then
+		# Not implemented on OpenWRT
+		/bin/true
+	    else
+		make_parent_directory ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d 0755
+	    fi
+	fi
+    fi
+
+    if [ -n "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
+	install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT 0644
+	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+    fi
+
+    [ $HOST = suse ] && IFUPDOWN=ifupdown.suse.sh || IFUPDOWN=ifupdown.fedora.sh
+fi
+
+#
+# Install the ifupdown script
+#
+
+if [ $HOST != openwrt ]; then
+    cp $IFUPDOWN ifupdown
+
+    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
+
+    make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
+
+    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown 0544
+fi
+
+if [ -d ${DESTDIR}/etc/NetworkManager ]; then
+    [ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d 0755
+    install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
+fi
+
+case $HOST in
+    debian)
+	if [ $configure -eq 1 ]; then
+	    install_file ifupdown ${DESTDIR}/etc/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}/etc/network/if-down.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}/etc/network/if-post-down.d/shorewall 0544
+	else
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-down.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-post-down.d/shorewall 0544
+	fi
+	;;
+    suse)
+	if [ -z "$RPM" ]; then
+	    if [ $configure -eq 0 ]; then
+		make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-up.d 0755
+		make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-down.d 0755
+	    fi
+
+	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-down.d/shorewall 0544
+	fi
+	;;
+    redhat)
+	if [ -z "$DESTDIR" ]; then
+	    install_local=
+
+	    if [ -f ${SBINDIR}/ifup-local -o -f ${SBINDIR}/ifdown-local ]; then
+		if ! grep -qF Shorewall-based ${SBINDIR}/ifup-local || ! grep -qF Shorewall-based ${SBINDIR}/ifdown-local; then
+		    echo "WARNING: ${SBINDIR}/ifup-local and/or ${SBINDIR}/ifdown-local already exist; up/down events will not be handled"
+		else
+		    install_local=Yes
+		fi
+	    else
+		install_local=Yes
+	    fi
+
+	    if [ -n "$install_local" ]; then
+		install_file ifupdown ${DESTDIR}${SBINDIR}/ifup-local 0544
+		install_file ifupdown ${DESTDIR}${SBINDIR}/ifdown-local 0544
+	    fi
+	fi
+	;;
+esac
+
+if [ -z "$DESTDIR" ]; then
+    if [ $configure -eq 1 -a -n "first_install" ]; then
+	if [ $HOST = debian ]; then
+	    if [ -n "$SERVICEDIR" ]; then
+		if systemctl enable ${PRODUCT}.service; then
+                    echo "$Product will start automatically at boot"
+		fi
+	    elif mywhich insserv; then
+		if insserv ${INITDIR}/$PRODUCT; then
+                    echo "$Product will start automatically at boot"
+		else
+		    cant_autostart
+		fi
+	    elif mywhich update-rc.d ; then
+		if update-rc.d $PRODUCT enable; then
+                    echo "$Product will start automatically at boot"
+		    echo "Set startup=1 in ${CONFDIR}/default/$PRODUCT to enable"
+		else
+		    cant_autostart
+		fi
+	    else
+		cant_autostart
+	    fi
+	elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+	    /etc/init.d/$PRODUCT enable
+	    if /etc/init.d/$PRODUCT enabled; then
+		echo "$Product will start automatically at boot"
+	    else
+		cant_autostart
+	    fi
+	elif [ $HOST = gentoo ]; then
+	    # On Gentoo, a service must be enabled manually by the user,
+	    # not by the installer
+	    /bin/true
+	else
+	    if [ -n "$SERVICEDIR" ]; then
+		if systemctl enable ${PRODUCT}.service; then
+		    echo "$Product will start automatically at boot"
+		fi
+	    elif [ -x ${SBINDIR}/insserv -o -x /usr${SBINDIR}/insserv ]; then
+		if insserv ${INITDIR}/$PRODUCT ; then
+		    echo "$Product will start automatically at boot"
+		else
+		    cant_autostart
+		fi
+	    elif [ -x ${SBINDIR}/chkconfig -o -x /usr${SBINDIR}/chkconfig ]; then
+		if chkconfig --add $PRODUCT ; then
+		    echo "$Product will start automatically at boot"
+		    chkconfig --list $PRODUCT
+		else
+		    cant_autostart
+		fi
+	    elif [ -x ${SBINDIR}/rc-update ]; then
+		if rc-update add $PRODUCT default; then
+		    echo "$Product will start automatically at boot"
+		else
+		    cant_autostart
+		fi
+	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+		/etc/init.d/$PRODUCT enable
+		if /etc/init.d/$PRODUCT enabled; then
+		    echo "$Product will start automatically at boot"
+		else
+		    cant_autostart
+		fi
+	    else
+		cant_autostart
+	    fi
+	fi
+    fi
+else
+    if [ $configure -eq 1 -a -n "$first_install" ]; then
+	if [ $HOST = debian -a -z "$SERVICEDIR" ]; then
+	    if [ -n "${DESTDIR}" ]; then
+		make_parent_directory ${DESTDIR}/etc/rcS.d 0755
+	    fi
+
+	    ln -sf ../init.d/$PRODUCT ${DESTDIR}${CONFDIR}/rcS.d/S38${PRODUCT}
+	    echo "$Product will start automatically at boot"
+	fi
+    fi
+fi
+
+[ -z "${DESTDIR}" ] && [ ! -f ~/.shorewallrc ] && cp ${SHAREDIR}/shorewall/shorewallrc .
+
+if [ -d ${DESTDIR}/etc/ppp ]; then
+    case $HOST in
+	debian|suse)
+	    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
+		make_parent_directory ${DESTDIR}/etc/ppp/$directory 0755 #SuSE doesn't create the IPv6 directories
+		cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown ${DESTDIR}${CONFDIR}/ppp/$directory/shorewall
+	    done
+	    ;;
+	redhat)
+	    #
+	    # Must use the dreaded ip_xxx.local file
+	    #
+	    for file in ip-up.local ip-down.local; do
+		FILE=${DESTDIR}/etc/ppp/$file
+		if [ -f $FILE ]; then
+		    if grep -qF Shorewall-based $FILE ; then
+			cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
+		    else
+			echo "$FILE already exists -- ppp devices will not be handled"
+			break
+		    fi
+		else
+		    cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
+		fi
+	    done
+	    ;;
+    esac
+fi
+#
+# Report Success
+#
+echo "shorewall Init Version $VERSION Installed"
--- a/Shorewall-init/logrotate
+++ b/Shorewall-init/logrotate
@@ -0,0 +1,5 @@
+/var/log/shorewall-ifupdown.log {
+  missingok
+  notifempty
+  create 0600 root root
+}
--- a/Shorewall-init/shorewall-init
+++ b/Shorewall-init/shorewall-init
@@ -0,0 +1,128 @@
+#!/bin/bash
+#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#
+#	(c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
+#
+#	On most distributions, this file should be called
+#	/etc/init.d/shorewall.
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#	This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by
+#	the Free Software Foundation, either version 2 of the license or,
+#	at your option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+###############################################################################
+# set the STATEDIR variable
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ $PRODUCT = shorewall ]; then
+	${SBINDIR}/shorewall compile
+    elif [ $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/shorewall -6 compile
+    else
+	return 0
+    fi
+}
+
+#
+# This is modified by the installer when ${SHAREDIR} <> /usr/share
+#
+. /usr/share/shorewall/shorewallrc
+
+# check if shorewall-init is configured or not
+if [ -f "$SYSCONFDIR/shorewall-init" ]; then
+    . $SYSCONFDIR/shorewall-init
+    if [ -z "$PRODUCTS" ]; then
+	echo "ERROR: No products configured" >&2
+	exit 1
+    fi
+else
+    echo "ERROR: ${SYSCONFDIR}/shorewall-init not found" >&2
+    exit 1
+fi
+
+# Initialize the firewall
+shorewall_start () {
+    local PRODUCT
+    local STATEDIR
+
+    printf "Initializing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		#
+		# Run in a sub-shell to avoid name collisions
+		#
+		(
+		    if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+			${STATEDIR}/firewall ${OPTIONS} stop
+		    fi
+		)
+	    fi
+	fi
+    done
+
+    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+	ipset -R < "$SAVE_IPSETS"
+    fi
+
+    return 0
+}
+
+# Clear the firewall
+shorewall_stop () {
+    local PRODUCT
+    local STATEDIR
+
+    printf "Clearing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
+	fi
+    done
+
+    if [ -n "$SAVE_IPSETS" ]; then
+	mkdir -p $(dirname "$SAVE_IPSETS")
+	if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	else
+	    rm -f "${SAVE_IPSETS}.tmp"
+	fi
+    fi
+
+    return 0
+}
+
+case "$1" in
+    start)
+	shorewall_start
+	;;
+    stop)
+	shorewall_stop
+	;;
+    *)
+	echo "Usage: $0 {start|stop}"
+	exit 1
+esac
+
+exit 0
--- a/Shorewall-init/shorewall-init.service
+++ b/Shorewall-init/shorewall-init.service
@@ -0,0 +1,20 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#
+[Unit]
+Description=Shorewall firewall (bootup security)
+Before=network-pre.target
+Wants=network-pre.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/sysconfig/shorewall-init
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
+
+[Install]
+WantedBy=basic.target
--- a/Shorewall-init/shorewall-init.service.debian
+++ b/Shorewall-init/shorewall-init.service.debian
@@ -0,0 +1,20 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
+#
+[Unit]
+Description=Shorewall firewall (bootup security)
+Before=network.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/default/shorewall-init
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
+
+[Install]
+WantedBy=basic.target
--- a/Shorewall-init/sysconfig
+++ b/Shorewall-init/sysconfig
@@ -0,0 +1,26 @@
+# List the Shorewall products that Shorewall-init is to
+# initialize (space-separated list).
+#
+# Sample: PRODUCTS="shorewall shorewall6"
+#
+PRODUCTS=""
+
+#
+# Set this to 1 if you want Shorewall-init to react to 
+# ifup/ifdown and NetworkManager events
+#
+IFUPDOWN=0
+#
+# Set this to the name of the file that is to hold
+# ipset contents. Shorewall-init will load those ipsets
+# during 'start' and will save them there during 'stop'.
+#
+SAVE_IPSETS=""
+#
+# Where Up/Down events get logged
+#
+LOGFILE=/var/log/shorewall-ifupdown.log
+
+# Startup options - set verbosity to 0 (minimal reporting)
+OPTIONS="-V0"
+
--- a/Shorewall-init/uninstall.sh
+++ b/Shorewall-init/uninstall.sh
@@ -0,0 +1,210 @@
+#!/bin/sh
+#
+# Script to back uninstall Shoreline Firewall Init
+#
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#
+#       Shorewall documentation is available at http://shorewall.sourceforge.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#    Usage:
+#
+#       You may only use this script to uninstall the version
+#       shown below. Simply run this script to remove Shorewall Firewall
+
+VERSION=xxx # The Build script inserts the actual version
+PRODUCT=shorewall-init
+Product="Shorewall Init"
+
+usage() # $1 = exit status
+{
+    ME=$(basename $0)
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
+    exit $1
+}
+
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
+#
+# Source common functions
+#
+. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
+#
+# Parse the run line
+#
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
+
+#
+# Read the RC file
+#
+if [ $# -eq 0 ]; then
+    if [ -f ./shorewallrc ]; then
+        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+    elif [ -f ~/.shorewallrc ]; then
+        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+    elif [ -f /usr/share/shorewall/shorewallrc ]; then
+        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+    else
+	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
+    fi
+elif [ $# -eq 1 ]; then
+    file=$1
+    case $file in
+	/*|.*)
+	    ;;
+	*)
+	    file=./$file || exit 1
+	    ;;
+    esac
+
+    . $file || fatal_error "Can not load the RC file: $file"
+else
+    usage 1
+fi
+
+if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
+    if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
+	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
+	echo "         and this is the $VERSION uninstaller."
+	VERSION="$INSTALLED_VERSION"
+    fi
+else
+    echo "WARNING: $Product Version $VERSION is not installed"
+    VERSION=""
+fi
+
+echo "Uninstalling $Product $VERSION"
+
+[ -n "$SANDBOX" ] && configure=0
+
+[ -n "${LIBEXEC:=${SHAREDIR}}" ]
+
+remove_file  ${SBINDIR}/$PRODUCT
+
+FIREWALL=${CONFDIR}/init.d/$PRODUCT
+
+if [ -f "$FIREWALL" ]; then
+    if [ $configure -eq 1 ]; then
+	if [ $HOST = openwrt ] ; then
+	    if /etc/init.d/$PRODUCT enabled; then
+		/etc/init.d/$PRODUCT disable
+	    fi
+	elif mywhich insserv ; then
+            insserv -r $FIREWALL
+	elif mywhich update-rc.d ; then
+	    update-rc.d ${PRODUCT} remove
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $FIREWALL)
+	fi
+    fi
+
+    remove_file $FIREWALL
+fi
+
+[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
+
+if [ -n "$SERVICEDIR" ]; then
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
+    remove_file $SERVICEDIR/${PRODUCT}.service
+fi
+
+if [ $HOST = openwrt ]; then
+    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
+else
+    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
+fi
+
+remove_file ${CONFDIR}/default/$PRODUCT
+remove_file ${CONFDIR}/sysconfig/$PRODUCT
+
+remove_file ${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall
+
+remove_file ${CONFDIR}/network/if-up.d/shorewall
+remove_file ${CONFDIR}/network/if-down.d/shorewall
+remove_file ${CONFDIR}/network/if-post-down.d/shorewall
+
+remove_file ${CONFDIR}/sysconfig/network/if-up.d/shorewall
+remove_file ${CONFDIR}/sysconfig/network/if-down.d/shorewall
+
+if [ -d ${CONFDIR}/ppp ]; then
+    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
+	remove_file ${CONFDIR}/ppp/$directory/shorewall
+    done
+
+    for file in if-up.local if-down.local; do
+	if [ -f ${CONFDIR}/ppp/$file ]; then
+	    if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
+		remove_file ${CONFDIR}/ppp/$FILE
+	    fi
+	fi
+    done
+fi
+
+remove_directory ${SHAREDIR}/$PRODUCT
+remove_directory ${LIBEXECDIR}/$PRODUCT
+remove_file  ${CONFDIR}/logrotate.d/$PRODUCT
+
+#
+# Report Success
+#
+echo "$Product $VERSION Uninstalled"
--- a/Shorewall-lite/COPYING
+++ b/Shorewall-lite/COPYING
@@ -2,7 +2,8 @@
 		       Version 2, June 1991

 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+                          51 Franklin Street, Fifth Floor,
+			  Boston, MA 02110-1301 USA
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

--- a/Shorewall-lite/Makefile
+++ b/Shorewall-lite/Makefile
@@ -1,18 +0,0 @@
-# Shorewall Lite Makefile to restart if firewall script is newer than last restart
-VARDIR=$(shell /sbin/shorewall-lite show vardir)
-SHAREDIR=/usr/share/shorewall-lite
-RESTOREFILE?=.restore
-
-all: $(VARDIR)/${RESTOREFILE}
-
-$(VARDIR)/${RESTOREFILE}: $(VARDIR)/firewall
-	@/sbin/shorewall-lite -q save >/dev/null; \
-	if \
-	    /sbin/shorewall-lite -q restart >/dev/null 2>&1; \
-	then \
-	    /sbin/shorewall-lite -q save >/dev/null; \
-	else \
-	    /sbin/shorewall-lite -q restart 2>&1 | tail >&2; \
-	fi
-
-# EOF
--- a/Shorewall-lite/README.txt
+++ b/Shorewall-lite/README.txt
@@ -1 +0,0 @@
-This is the Shorewall-lite development 4.3 branch of SVN.
--- a/Shorewall-lite/configpath
+++ b/Shorewall-lite/configpath
@@ -1,7 +1,7 @@
 #
-# Shorewall Lite version 4.1 - Default Config Path
+# Shorewall Lite version 5 - Default Config Path
 #
 # /usr/share/shorewall-lite/configpath
 #

-CONFIG_PATH=/etc/shorewall-lite:/usr/share/shorewall-lite
+CONFIG_PATH=${CONFDIR}/shorewall-lite:${SHAREDIR}/shorewall-lite:${SHAREDIR}/shorewall
--- a/Shorewall-lite/default.debian.systemd
+++ b/Shorewall-lite/default.debian.systemd
@@ -0,0 +1,26 @@
+#
+# Global start/restart/reload/stop options
+#
+OPTIONS=""
+
+#
+# Start options
+#
+STARTOPTIONS=""
+
+#
+# Restart options
+#
+RESTARTOPTIONS=""
+
+#
+# Reload options
+#
+RELOADOPTIONS=""
+
+#
+# Stop options
+#
+STOPOPTIONS=""
+
+# EOF
--- a/Shorewall-lite/default.debian.sysvinit
+++ b/Shorewall-lite/default.debian.sysvinit
@@ -1,5 +1,5 @@
 # prevent startup with default configuration
-# set the following varible to 1 in order to allow Shorewall-lite to start
+# set the following variable to 1 in order to allow Shorewall-lite to start

 startup=0

@@ -16,9 +16,39 @@ startup=0
 #    wait_interface=

 #
-# Startup options
+# Global start/restart/reload/stop options
 #
-
 OPTIONS=""

+#
+# Start options
+#
+STARTOPTIONS=""
+
+#
+# Restart options
+#
+RESTARTOPTIONS=""
+
+#
+# Reload options
+#
+RELOADOPTIONS=""
+
+#
+# Stop options
+#
+STOPOPTIONS=""
+
+#
+# Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf
+#
+INITLOG=/dev/null
+
+#
+# Set this to 1 to cause '/etc/init.d/shorewall-lite stop' to place the firewall in
+# a safe state rather than to open it
+#
+SAFESTOP=0
+
 # EOF
--- a/Shorewall-lite/fallback.sh
+++ b/Shorewall-lite/fallback.sh
@@ -1,104 +0,0 @@
-#!/bin/sh
-#
-# Script to back out the installation of Shorewall Lite and to restore the previous version of
-# the program
-#
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 2006,2007 - Tom Eastep (teastep@shorewall.net)
-#
-#       Shorewall documentation is available at http://shorewall.net
-#
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
-#
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
-#
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-#    Usage:
-#
-#       You may only use this script to back out the installation of the version
-#       shown below. Simply run this script to revert to your prior version of
-#       Shoreline Firewall.
-
-VERSION=4.4.0.1
-
-usage() # $1 = exit status
-{
-    echo "usage: $(basename $0)"
-    exit $1
-}
-
-restore_directory() # $1 = directory to restore
-{
-    if [ -d ${1}-${VERSION}.bkout ]; then
-	if mv -f $1 ${1}-${VERSION} && mv ${1}-${VERSION}.bkout $1; then
-	    echo
-	    echo "$1 restored"
-	    rm -rf ${1}-${VERSION}
-	else
-	    echo "ERROR: Could not restore $1"
-	    exit 1
-	fi
-    fi
-}
-
-restore_file() # $1 = file to restore, $2 = (Optional) Directory to restore from
-{
-    if [ -n "$2" ]; then
-	local file
-	file=$(basename $1)
-
-	if [ -f $2/$file ]; then
-	    if mv -f $2/$file $1 ; then
-		echo
-		echo "$1 restored"
-		return
-	    fi
-
-	    echo "ERROR: Could not restore $1"
-	    exit 1
-        fi
-    fi
-
-    if [ -f ${1}-${VERSION}.bkout -o -L ${1}-${VERSION}.bkout ]; then
-	if (mv -f ${1}-${VERSION}.bkout $1); then
-	    echo
-	    echo "$1 restored"
-        else
-	    echo "ERROR: Could not restore $1"
-	    exit 1
-        fi
-    fi
-}
-
-if [ ! -f /usr/share/shorewall-lite-${VERSION}.bkout/version ]; then
-    echo "Shorewall Version $VERSION is not installed"
-    exit 1
-fi
-
-echo "Backing Out Installation of Shorewall $VERSION"
-
-if [ -L /usr/share/shorewall-lite/init ]; then
-    FIREWALL=$(ls -l /usr/share/shorewall-lite/init | sed 's/^.*> //')
-    restore_file $FIREWALL /usr/share/shorewall-lite-${VERSION}.bkout
-else
-    restore_file /etc/init.d/shorewall /usr/share/shorewall-lite-${VERSION}.bkout
-fi
-
-restore_file /sbin/shorewall /var/lib/shorewall-lite-${VERSION}.bkout
-
-restore_directory /etc/shorewall-lite
-restore_directory /usr/share/shorewall-lite
-restore_directory /var/lib/shorewall-lite
-
-echo "Shorewall Lite Restored to Version $(cat /usr/share/shorewall-lite/version)"
-
-
--- a/Shorewall-lite/init.archlinux.sh
+++ b/Shorewall-lite/init.archlinux.sh
@@ -1,58 +0,0 @@
-#!/bin/bash
-
-OPTIONS="-f"
-
-if [ -f /etc/sysconfig/shorewall ] ; then
-	. /etc/sysconfig/shorewall
-elif [ -f /etc/default/shorewall ] ; then
-	. /etc/default/shorewall
-fi
-
-# if you want to override options, do so in /etc/sysconfig/shorewall or
-# in /etc/default/shorewall --
-# i strongly encourage you use the latter, since /etc/sysconfig/ does not exist.
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-DAEMON_NAME="shorewall" # of course shorewall is NOT a deamon.
-
-case "$1" in
-	start)
-		stat_busy "Starting $DAEMON_NAME"
-		/sbin/shorewall-lite $OPTIONS start &>/dev/null
-		if [ $? -gt 0 ]; then
-			stat_fail
-		else
-			add_daemon $DAEMON_NAME
-			stat_done
-		fi
-		;;
-
-
-	stop)
-		stat_busy "Stopping $DAEMON_NAME"
-		/sbin/shorewall-lite stop &>/dev/null
-		if [ $? -gt 0 ]; then
-			stat_fail
-		else
-			rm_daemon $DAEMON_NAME
-			stat_done
-		fi
-		;;
-
-	restart|reload)
-		stat_busy "Restarting $DAEMON_NAME"
-		/sbin/shorewall-lite restart &>/dev/null
-		if [ $? -gt 0  ]; then
-			stat_fail
-		else
-			stat_done
-		fi
-		;;
-
-	*)
-		echo "usage: $0 {start|stop|restart}"
-esac
-exit 0
-
--- a/Shorewall-lite/init.debian.sh
+++ b/Shorewall-lite/init.debian.sh
@@ -2,31 +2,28 @@

 ### BEGIN INIT INFO
 # Provides:          shorewall-lite
-# Required-Start:    $network
-# Required-Stop:     $network
+# Required-Start:    $network $remote_fs
+# Required-Stop:     $network $remote_fs
 # Default-Start:     S
-# Default-Stop:      0 6
+# Default-Stop:      0 1 6
 # Short-Description: Configure the firewall at boot time
 # Description:       Configure the firewall according to the rules specified in
 #                    /etc/shorewall-lite
 ### END INIT INFO

+. /lib/lsb/init-functions

-
-SRWL=/sbin/shorewall-lite
+SRWL='/sbin/shorewall -l'
 SRWL_OPTS="-tvv"
-# Note, set INITLOG to /dev/null if you do not want to
-# keep logs of the firewall (not recommended)
-INITLOG=/var/log/shorewall-lite-init.log
+test -n ${INITLOG:=/var/log/shorewall-lite-init.log}

-[ "$INITLOG" eq "/dev/null" && SHOREWALL_INIT_SCRIPT=1 || SHOREWALL_INIT_SCRIPT=0
+[ "$INITLOG" = "/dev/null" ] && SHOREWALL_INIT_SCRIPT=1 || SHOREWALL_INIT_SCRIPT=0

 export SHOREWALL_INIT_SCRIPT
-
 test -x $SRWL || exit 0
 test -x $WAIT_FOR_IFUP || exit 0
-test -n $INITLOG || {
-	echo "INITLOG cannot be empty, please configure $0" ; 
+test -n "$INITLOG" || {
+	echo "INITLOG cannot be empty, please configure $0" ;
 	exit 1;
 }

@@ -38,12 +35,13 @@ fi

 echo_notdone () {

-  if [ "$INITLOG" = "/dev/null" ] ; then 
+  if [ "$INITLOG" = "/dev/null" ] ; then
 	  echo "not done."
-  else 
+  else
 	  echo "not done (check $INITLOG)."
  fi

+  exit 1
 }

 not_configured () {
@@ -59,17 +57,23 @@ not_configured () {
 	exit 0
 }

+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
 # parse the shorewall params file in order to use params in
 # /etc/default/shorewall
-if [ -f "/etc/shorewall-lite/params" ]
+
+if [ -f "$CONFDIR/shorewall-lite/params" ]
 then
-	. /etc/shorewall-lite/params
+	. $CONFDIR/shorewall-lite/params
 fi

 # check if shorewall is configured or not
-if [ -f "/etc/default/shorewall-lite" ]
+if [ -f "$SYSCONFDIR/shorewall-lite" ]
 then
-	. /etc/default/shorewall-lite
+	. $SYSCONFDIR/shorewall-lite
 	SRWL_OPTS="$SRWL_OPTS $OPTIONS"
 	if [ "$startup" != "1" ]
 	then
@@ -81,32 +85,42 @@ fi

 # start the firewall
 shorewall_start () {
-  echo -n "Starting \"Shorewall firewall\": "
-  $SRWL $SRWL_OPTS start >> $INITLOG 2>&1 && echo "done." || echo_notdone
+  printf "Starting \"Shorewall firewall\": "
+  $SRWL $SRWL_OPTS start $STARTOPTIONS >> $INITLOG 2>&1 && echo "done." || echo_notdone
  return 0
 }

 # stop the firewall
 shorewall_stop () {
-  echo -n "Stopping \"Shorewall firewall\": "
-  $SRWL $SRWL_OPTS clear >> $INITLOG 2>&1 && echo "done." || echo_notdone
+  if [ "$SAFESTOP" = 1 ]; then
+      printf "Stopping \"Shorewall Lite firewall\": "
+      $SRWL $SRWL_OPTS stop >> $INITLOG 2>&1 && echo "done." || echo_notdone
+  else
+      printf "Clearing all \"Shorewall Lite firewall\" rules: "
+      $SRWL $SRWL_OPTS clear >> $INITLOG 2>&1 && echo "done." || echo_notdone
+  fi
  return 0
 }

 # restart the firewall
 shorewall_restart () {
-  echo -n "Restarting \"Shorewall firewall\": "
-  $SRWL $SRWL_OPTS restart >> $INITLOG 2>&1 && echo "done." || echo_notdone
+  printf "Restarting \"Shorewall firewall\": "
+  $SRWL $SRWL_OPTS restart $RESTARTOPTIONS >> $INITLOG 2>&1 && echo "done." || echo_notdone
  return 0
 }

 # refresh the firewall
 shorewall_refresh () {
-  echo -n "Refreshing \"Shorewall firewall\": "
+  printf "Refreshing \"Shorewall firewall\": "
  $SRWL $SRWL_OPTS refresh >> $INITLOG 2>&1 && echo "done." || echo_notdone
  return 0
 }

+# status of the firewall
+shorewall_status () {
+  $SRWL $SRWL_OPTS status && exit 0 || exit $?
+}
+
 case "$1" in
  start)
     shorewall_start
@@ -120,8 +134,11 @@ case "$1" in
  force-reload|restart)
     shorewall_restart
     ;;
+  status)
+     shorewall_status
+     ;;
  *)
-     echo "Usage: /etc/init.d/shorewall-lite {start|stop|refresh|restart|force-reload}"
+     echo "Usage: /etc/init.d/shorewall-lite {start|stop|refresh|restart|force-reload|status}"
     exit 1
 esac

--- a/Shorewall-lite/init.fedora.sh
+++ b/Shorewall-lite/init.fedora.sh
@@ -0,0 +1,117 @@
+#!/bin/sh
+#
+# Shorewall init script
+#
+# chkconfig: - 28 90
+# description: Packet filtering firewall
+
+### BEGIN INIT INFO
+# Provides: shorewall-lite
+# Required-Start: $local_fs $remote_fs $syslog $network
+# Should-Start: VMware $time $named
+# Required-Stop:
+# Default-Start:
+# Default-Stop:	  0 1 2 3 4 5 6
+# Short-Description: Packet filtering firewall
+# Description: The Shoreline Firewall, more commonly known as "Shorewall", is a
+#              Netfilter (iptables) based firewall
+### END INIT INFO
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+prog="shorewall -l"
+shorewall="${SBINDIR}/$prog"
+logger="logger -i -t $prog"
+lockfile="/var/lock/subsys/$prog"
+
+# Get startup options (override default)
+OPTIONS=
+
+if [ -f ${SYSCONFDIR}/$prog ]; then
+    . ${SYSCONFDIR}/$prog
+fi
+
+start() {
+    printf $"Starting Shorewall: "
+    $shorewall $OPTIONS start $STARTOPTIONS 2>&1 | $logger
+    retval=${PIPESTATUS[0]}
+    if [[ $retval == 0 ]]; then
+	touch $lockfile
+	success
+    else
+	failure
+    fi
+    echo
+    return $retval
+}
+
+stop() {
+    printf $"Stopping Shorewall: "
+    $shorewall $OPTIONS stop 2>&1 | $logger
+    retval=${PIPESTATUS[0]}
+    if [[ $retval == 0 ]]; then
+	rm -f $lockfile
+	success
+    else
+	failure
+    fi
+    echo
+    return $retval
+}
+
+restart() {
+# Note that we don't simply stop and start since shorewall has a built in
+# restart which stops the firewall if running and then starts it.
+    printf $"Restarting Shorewall: "
+    $shorewall $OPTIONS restart $RESTARTOPTIONS 2>&1 | $logger
+    retval=${PIPESTATUS[0]}
+    if [[ $retval == 0 ]]; then
+	touch $lockfile
+	success
+    else # Failed to start, clean up lock file if present
+	rm -f $lockfile
+	failure
+    fi
+    echo
+    return $retval
+}
+
+status(){
+    $shorewall status
+    return $?
+}
+
+status_q() {
+    status > /dev/null 2>&1
+}
+
+case "$1" in
+    start)
+	status_q && exit 0
+	$1
+	;;
+    stop)
+	status_q || exit 0
+	$1
+	;;
+    restart|reload|force-reload)
+	restart
+	;;
+    condrestart|try-restart)
+        status_q || exit 0
+        restart
+        ;;
+    status)
+	$1
+	;;
+    *)
+	echo "Usage: $0 start|stop|reload|restart|force-reload|status"
+	exit 1
+	;;
+esac
--- a/Shorewall-lite/init.openwrt.sh
+++ b/Shorewall-lite/init.openwrt.sh
@@ -0,0 +1,94 @@
+#!/bin/sh /etc/rc.common
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)
+#
+#	On most distributions, this file should be called /etc/init.d/shorewall.
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#	If an error occurs while starting or restarting the firewall, the
+#	firewall is automatically stopped.
+#
+#	Commands are:
+#
+#	   shorewall-lite start			  Starts the firewall
+#	   shorewall-lite restart		  Restarts the firewall
+#	   shorewall-lite reload		  Reload the firewall
+#	   shorewall-lite stop			  Stops the firewall
+#	   shorewall-lite status		  Displays firewall status
+#
+
+# description: Packet filtering firewall
+
+# Openwrt related
+# Start and stop runlevel variable
+START=50
+STOP=89
+# Displays the status command
+EXTRA_COMMANDS="status"
+EXTRA_HELP=" status Displays firewall status"
+
+################################################################################
+# Get startup options (override default)
+################################################################################
+OPTIONS=
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f ${SYSCONFDIR}/shorewall-lite ]; then
+    . ${SYSCONFDIR}/shorewall-lite
+fi
+
+SHOREWALL_INIT_SCRIPT=1
+
+################################################################################
+# E X E C U T I O N    B E G I N S   H E R E				       #
+################################################################################
+# Arg1 of init script is arg2 when rc.common is sourced; set to action variable
+command="$action"
+
+start() {
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $STARTOPTIONS
+}
+
+boot() {
+	local command="start"
+	start
+}
+
+restart() {
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $RESTARTOPTIONS
+}
+
+reload() {
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $RELOADOPTION
+}
+
+stop() {
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $STOPOPTIONS
+}
+
+status() {
+	exec ${SBINDIR}/shorewall -l $OPTIONS $command $@
+}
--- a/Shorewall-lite/init.sh
+++ b/Shorewall-lite/init.sh
@@ -1,19 +1,20 @@
 #!/bin/sh
 RCDLINKS="2,S41 3,S41 6,K41"
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.1
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	On most distributions, this file should be called /etc/init.d/shorewall.
 #
 #	Complete documentation is available at http://shorewall.net
 #
+#       This program is part of Shorewall.
+#
 #	This program is free software; you can redistribute it and/or modify
-#	it under the terms of Version 2 of the GNU General Public License
-#	as published by the Free Software Foundation.
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
 #
 #	This program is distributed in the hope that it will be useful,
 #	but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -21,8 +22,7 @@ RCDLINKS="2,S41 3,S41 6,K41"
 #	GNU General Public License for more details.
 #
 #	You should have received a copy of the GNU General Public License
-#	along with this program; if not, write to the Free Software
-#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 #	If an error occurs while starting or restarting the firewall, the
 #	firewall is automatically stopped.
@@ -61,10 +61,14 @@ usage() {
 # Get startup options (override default)
 ################################################################################
 OPTIONS=
-if [ -f /etc/sysconfig/shorewall ]; then
-    . /etc/sysconfig/shorewall
-elif [ -f /etc/default/shorewall ] ; then
-    . /etc/default/shorewall
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f ${SYSCONFDIR}/shorewall-lite ]; then
+    . ${SYSCONFDIR}/shorewall-lite
 fi

 SHOREWALL_INIT_SCRIPT=1
@@ -76,14 +80,13 @@ command="$1"

 case "$command" in
    start)
-	exec /sbin/shorewall-lite $OPTIONS $@
+	exec ${SBINDIR}/shorewall-lite $OPTIONS start $STARTOPTIONS
 	;;
-    stop|restart|status)
-	exec /sbin/shorewall-lite $@
+    restart|reload)
+	exec ${SBINDIR}/shorewall-lite $OPTIONS restart $RESTARTOPTIONS
 	;;
-    reload)
-	shift
-	exec /sbin/shorewall-lite restart $@
+    status|stop)
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $@
 	;;
    *)
 	usage
--- a/Shorewall-lite/init.suse.sh
+++ b/Shorewall-lite/init.suse.sh
@@ -0,0 +1,92 @@
+#!/bin/sh
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#
+#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012 - Tom Eastep (teastep@shorewall.net)
+#
+#	On most distributions, this file should be called /etc/init.d/shorewall.
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of Version 2 of the GNU General Public License
+#	as published by the Free Software Foundation.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, write to the Free Software
+#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+#	If an error occurs while starting or restarting the firewall, the
+#	firewall is automatically stopped.
+#
+#	Commands are:
+#
+#	   shorewall start			  Starts the firewall
+#	   shorewall restart			  Restarts the firewall
+#	   shorewall reload			  Reload the firewall
+#						  (same as restart)
+#	   shorewall stop			  Stops the firewall
+#	   shorewall status			  Displays firewall status
+#
+
+
+### BEGIN INIT INFO
+# Provides:	  shorewall-lite
+# Required-Start: $network $remote_fs
+# Required-Stop:  
+# Default-Start:  2 3 5
+# Default-Stop:	  0 1 6
+# Description:	  starts and stops the shorewall firewall
+# Short-Description: Packet filtering firewall
+### END INIT INFO
+
+################################################################################
+# Give Usage Information						       #
+################################################################################
+usage() {
+    echo "Usage: $0 start|stop|reload|restart|status"
+    exit 1
+}
+
+################################################################################
+# Get startup options (override default)
+################################################################################
+OPTIONS=
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f ${SYSCONFDIR}/shorewall-lite ]; then
+    . ${SYSCONFDIR}/shorewall-lite
+fi
+
+SHOREWALL_INIT_SCRIPT=1
+
+################################################################################
+# E X E C U T I O N    B E G I N S   H E R E				       #
+################################################################################
+command="$1"
+
+case "$command" in
+    start)
+	exec ${SBINDIR}/shorewall-lite $OPTIONS start $STARTOPTIONS
+	;;
+    restart|reload)
+	exec ${SBINDIR}/shorewall-lite $OPTIONS restart $RESTARTOPTIONS
+	;;
+    status|stop)
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $@
+	;;
+    *)
+	usage
+	;;
+esac
--- a/Shorewall-lite/install.sh
+++ b/Shorewall-lite/install.sh
@@ -2,355 +2,562 @@
 #
 # Script to install Shoreline Firewall Lite
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 2000,2001,2002,2003,2004,2005,2006,2007 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+#       This program is part of Shorewall.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #

-VERSION=4.4.0.1
+VERSION=xxx # The Build script inserts the actual version

 usage() # $1 = exit status
 {
    ME=$(basename $0)
-    echo "usage: $ME"
-    echo "       $ME -v"
-    echo "       $ME -h"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
    exit $1
 }

-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    echo $dir/$1
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
-cant_autostart()
-{
-    echo
-    echo  "WARNING: Unable to configure shorewall to start automatically at boot" >&2
-}
-
-delete_file() # $1 = file to delete
-{
-    rm -f $1
-}
-
 install_file() # $1 = source $2 = target $3 = mode
 {
-    run_install $OWNERSHIP -m $3 $1 ${2}
-}
-
-#
-# Parse the run line
-#
-# DEST is the SysVInit script directory
-# INIT is the name of the script in the $DEST directory
-# RUNLEVELS is the chkconfig parmeters for firewall
-# ARGS is "yes" if we've already parsed an argument
-#
-ARGS=""
-
-if [ -z "$DEST" ] ; then
-	DEST="/etc/init.d"
-fi
-
-if [ -z "$INIT" ] ; then
-	INIT="shorewall-lite"
-fi
-
-if [ -z "$RUNLEVELS" ] ; then
-	RUNLEVELS=""
-fi
-
-while [ $# -gt 0 ] ; do
-    case "$1" in
-	-h|help|?)
-	    usage 0
-	    ;;
-        -v)
-	    echo "Shorewall Lite Firewall Installer Version $VERSION"
-	    exit 0
-	    ;;
-	*)
-	    usage 1
-	    ;;
-    esac
-    shift
-    ARGS="yes"
-done
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
-
-#
-# Determine where to install the firewall script
-#
-DEBIAN=
-CYGWIN=
-
-case $(uname) in
-    CYGWIN*)
-	if [ -z "$PREFIX" ]; then
-	    DEST=
-	    INIT=
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
 	fi
-
-	OWNER=$(id -un)
-	GROUP=$(id -gn)
-	;;
-    *)
-	[ -z "$OWNER" ] && OWNER=root
-	[ -z "$GROUP" ] && GROUP=root
-	;;
-esac
-
-OWNERSHIP="-o $OWNER -g $GROUP"
-
-if [ -n "$PREFIX" ]; then
-    if [ `id -u` != 0 ] ; then
-	echo "Not setting file owner/group permissions, not running as root."
-	OWNERSHIP=""
    fi
-    
-    install -d $OWNERSHIP -m 755 ${PREFIX}/sbin
-    install -d $OWNERSHIP -m 755 ${PREFIX}${DEST}
-elif [ -d /etc/apt -a -e /usr/bin/dpkg ]; then
-    DEBIAN=yes
-elif [ -f /etc/slackware-version ] ; then
-    DEST="/etc/rc.d"
-    INIT="rc.firewall"
-elif [ -f /etc/arch-release ] ; then
-      DEST="/etc/rc.d"
-      INIT="shorewall-lite"
-      ARCHLINUX=yes
-fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
+}

 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"

-echo "Installing Shorewall Lite Version $VERSION"
+if [ -f shorewall-lite.service ]; then
+    PRODUCT=shorewall-lite
+    Product="Shorewall Lite"
+else
+    PRODUCT=shorewall6-lite
+    Product="Shorewall6 Lite"
+fi

 #
-# Check for /etc/shorewall-lite
+# Source common functions
 #
-if [ -z "$PREFIX" -a -d /etc/shorewall-lite ]; then
+. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
+#
+# Parse the run line
+#
+finished=0
+configure=1
+
+while [ $finished -eq 0 ] ; do
+
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Installer Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
+
+#
+# Read the RC file
+#
+if [ $# -eq 0 ]; then
+    if [ -f ./shorewallrc ]; then
+	file=./shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    elif [ -f ~/.shorewallrc ]; then
+	file=~/.shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    elif [ -f /usr/share/shorewall/shorewallrc ]; then
+	file=/usr/share/shorewall/shorewallrc
+        . $file || fatal_error "Can not load the RC file: $file"
+    else
+	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
+    fi
+elif [ $# -eq 1 ]; then
+    file=$1
+    case $file in
+	/*|.*)
+	    ;;
+	*)
+	    file=./$file || exit 1
+	    ;;
+    esac
+
+    . $file || fatal_error "Can not load the RC file: $file"
+else
+    usage 1
+fi
+
+if [ -z "${VARLIB}" ]; then
+    VARLIB=${VARDIR}
+    VARDIR=${VARLIB}/${PRODUCT}
+elif [ -z "${VARDIR}" ]; then
+    VARDIR=${VARLIB}/${PRODUCT}
+fi
+
+for var in SHAREDIR LIBEXECDIR CONFDIR SBINDIR VARLIB VARDIR; do
+    require $var
+done
+
+[ -n "${INITFILE}" ] && require INITSOURCE && require INITDIR
+
+PATH=${SBINDIR}:/bin:/usr${SBINDIR}:/usr/bin:/usr/local/bin:/usr/local${SBINDIR}
+
+[ -n "$SANDBOX" ] && configure=0
+
+#
+# Determine where to install the firewall script
+#
+cygwin=
+
+if [ -z "$BUILD" ]; then
+    case $(uname) in
+	cygwin*|CYGWIN*)
+	    BUILD=cygwin
+	    ;;
+	Darwin)
+	    BUILD=apple
+	    ;;
+	*)
+	    if [ -f /etc/os-release ]; then
+		eval $(cat /etc/os-release | grep ^ID)
+
+		case $ID in
+		    fedora|rhel|centos|foobar)
+			BUILD=redhat
+			;;
+		    debian)
+			BUILD=debian
+			;;
+		    gentoo)
+			BUILD=gentoo
+			;;
+		    opensuse)
+			BUILD=suse
+			;;
+		    *)
+			BUILD="$ID"
+			;;
+		esac
+	    elif [ -f ${CONFDIR}/debian_version ]; then
+		BUILD=debian
+	    elif [ -f /etc/gentoo-release ]; then
+		BUILD=gentoo
+	    elif [ -f ${CONFDIR}/redhat-release ]; then
+		BUILD=redhat
+	    elif [ -f ${CONFDIR}/SuSE-release ]; then
+		BUILD=suse
+	    elif [ -f ${CONFDIR}/slackware-version ] ; then
+		BUILD=slackware
+	    elif [ -f ${CONFDIR}/arch-release ] ; then
+		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ]; then
+		BUILD=openwrt
+	    else
+		BUILD=linux
+	    fi
+	    ;;
+    esac
+fi
+
+case $BUILD in
+    cygwin*|CYGWIN*)
+	OWNER=$(id -un)
+	GROUP=$(id -gn)
+	;;
+    apple)
+	[ -z "$OWNER" ] && OWNER=root
+	[ -z "$GROUP" ] && GROUP=wheel
+	;;
+    *)
+	if [ $(id -u) -eq 0 ]; then
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
+	;;
+esac
+
+[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
+
+[ -n "$HOST" ] || HOST=$BUILD
+
+case "$HOST" in
+    cygwin)
+	echo "$PRODUCT is not supported on Cygwin" >&2
+	exit 1
+	;;
+    apple)
+	echo "$PRODUCT is not supported on OS X" >&2
+	exit 1
+	;;
+    debian)
+	echo "Installing Debian-specific configuration..."
+	;;
+    gentoo)
+	echo "Installing Gentoo-specific configuration..."
+	;;
+    redhat)
+	echo "Installing Redhat/Fedora-specific configuration..."
+	;;
+    slackware)
+	echo "Installing Slackware-specific configuration..."
+	;;
+    archlinux)
+	echo "Installing ArchLinux-specific configuration..."
+	;;
+    suse)
+	echo "Installing Suse-specific configuration..."
+	;;
+    openwrt)
+	echo "Installing OpenWRT-specific configuration..."
+	;;
+    linux)
+	;;
+    *)
+	fatal_error "ERROR: Unknown HOST \"$HOST\""
+	;;
+esac
+
+[ -z "$INITDIR" ] && INITDIR="${CONFDIR}/init.d"
+
+if [ -n "$DESTDIR" ]; then
+    if [ `id -u` != 0 ] ; then
+	echo "Not setting file owner/group permissions, not running as root."
+	OWNERSHIP=""
+    fi
+
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
+
+else
+    if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
+	echo "$PRODUCT $VERSION requires Shorewall Core which does not appear to be installed" >&2
+	exit 1
+    fi
+fi
+
+echo "Installing $Product Version $VERSION"
+
+#
+# Check for ${CONFDIR}/$PRODUCT
+#
+if [ -z "$DESTDIR" -a -d ${CONFDIR}/$PRODUCT ]; then
+    if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
+	echo "$PRODUCT $VERSION requires Shorewall Core which does not appear to be installed" >&2
+	exit 1
+    fi
+
+    [ -f ${CONFDIR}/$PRODUCT/shorewall.conf ] && \
+	mv -f ${CONFDIR}/$PRODUCT/shorewall.conf ${CONFDIR}/$PRODUCT/$PRODUCT.conf
+else
+    rm -rf ${DESTDIR}${CONFDIR}/$PRODUCT
+    rm -rf ${DESTDIR}${SHAREDIR}/$PRODUCT
+    rm -rf ${DESTDIR}${VARDIR}
+    [ "$LIBEXECDIR" = /usr/share ] || rm -rf ${DESTDIR}/usr/share/$PRODUCT/wait4ifup ${DESTDIR}/usr/share/$PRODUCT/shorecap
+fi
+
+#
+# Check for ${SHAREDIR}/$PRODUCT/version
+#
+if [ -f ${DESTDIR}${SHAREDIR}/$PRODUCT/version ]; then
    first_install=""
-    [ -f /etc/shorewall-lite/shorewall.conf ] && \
-	mv -f /etc/shorewall-lite/shorewall.conf /etc/shorewall-lite/shorewall-lite.conf
 else
    first_install="Yes"
-    rm -rf ${PREFIX}/etc/shorewall-lite
-    rm -rf ${PREFIX}/usr/share/shorewall-lite
-    rm -rf ${PREFIX}/var/lib/shorewall-lite
 fi

-delete_file ${PREFIX}/usr/share/shorewall-lite/xmodules
+delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules

-install_file shorewall-lite ${PREFIX}/sbin/shorewall-lite 0544 ${PREFIX}/var/lib/shorewall-lite-${VERSION}.bkout
-
-echo "Shorewall Lite control program installed in ${PREFIX}/sbin/shorewall-lite"
+[ -n "${INITFILE}" ] && make_parent_directory ${DESTDIR}${INITDIR} 0755

 #
-# Install the Firewall Script
+# Create ${CONFDIR}/$PRODUCT, /usr/share/$PRODUCT and /var/lib/$PRODUCT if needed
 #
-if [ -n "$DEBIAN" ]; then
-    install_file init.debian.sh /etc/init.d/shorewall-lite 0544 ${PREFIX}/usr/share/shorewall-lite-${VERSION}.bkout
-elif [ -n "$ARCHLINUX" ]; then
-    install_file init.archlinux.sh ${PREFIX}${DEST}/$INIT 0544 ${PREFIX}/usr/share/shorewall-lite-${VERSION}.bkout
+make_parent_directory ${DESTDIR}${CONFDIR}/$PRODUCT 0755
+make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
+make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
+make_parent_directory ${DESTDIR}${SBINDIR} 0755
+make_parent_directory ${DESTDIR}${VARDIR} 0755

-else
-    install_file init.sh ${PREFIX}${DEST}/$INIT 0544 ${PREFIX}/usr/share/shorewall-lite-${VERSION}.bkout
+if [ -n "$DESTDIR" ]; then
+    make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
+    make_parent_directory ${DESTDIR}${INITDIR} 0755
 fi

-echo  "Shorewall Lite script installed in ${PREFIX}${DEST}/$INIT"
+if [ -n "$INITFILE" ]; then
+    if [ -f "${INITSOURCE}" ]; then
+	initfile="${DESTDIR}${INITDIR}/${INITFILE}"
+	install_file ${INITSOURCE} "$initfile" 0544

+	[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' "$initfile"
+
+	echo  "SysV init script $INITSOURCE installed in $initfile"
+    fi
+fi
 #
-# Create /etc/shorewall-lite, /usr/share/shorewall-lite and /var/lib/shorewall-lite if needed
+# Install the .service file
 #
-mkdir -p ${PREFIX}/etc/shorewall-lite
-mkdir -p ${PREFIX}/usr/share/shorewall-lite
-mkdir -p ${PREFIX}/var/lib/shorewall-lite
-
-chmod 755 ${PREFIX}/etc/shorewall-lite
-chmod 755 ${PREFIX}/usr/share/shorewall-lite
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi

+if [ -n "$SERVICEDIR" ]; then
+    make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+    [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
+    [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
+fi
 #
 # Install the config file
 #
-if [ ! -f ${PREFIX}/etc/shorewall-lite/shorewall-lite.conf ]; then
-   run_install $OWNERSHIP -m 0744 shorewall-lite.conf ${PREFIX}/etc/shorewall-lite/shorewall-lite.conf
-   echo "Config file installed as ${PREFIX}/etc/shorewall-lite/shorewall-lite.conf"
+if [ ! -f ${DESTDIR}${CONFDIR}/$PRODUCT/$PRODUCT.conf ]; then
+   install_file $PRODUCT.conf ${DESTDIR}${CONFDIR}/$PRODUCT/$PRODUCT.conf 0744
+   echo "Config file installed as ${DESTDIR}${CONFDIR}/$PRODUCT/$PRODUCT.conf"
 fi

-if [ -n "$ARCHLINUX" ] ; then
-   sed -e 's!LOGFILE=/var/log/messages!LOGFILE=/var/log/messages.log!' -i ${PREFIX}/etc/shorewall-lite/shorewall.conf
+if [ $HOST = archlinux ] ; then
+   sed -e 's!LOGFILE=/var/log/messages!LOGFILE=/var/log/messages.log!' -i ${DESTDIR}${CONFDIR}/$PRODUCT/$PRODUCT.conf
+elif [ $HOST = gentoo ]; then
+    # Adjust SUBSYSLOCK path (see https://bugs.gentoo.org/show_bug.cgi?id=459316)
+    perl -p -w -i -e "s|^SUBSYSLOCK=.*|SUBSYSLOCK=/run/lock/$PRODUCT|;" ${DESTDIR}${CONFDIR}/$PRODUCT/$PRODUCT.conf
 fi
-
-#
-# Install the  Makefile
-#
-run_install $OWNERSHIP -m 0600 Makefile ${PREFIX}/etc/shorewall-lite/Makefile
-echo "Makefile installed as ${PREFIX}/etc/shorewall-lite/Makefile"
-
 #
 # Install the default config path file
 #
-install_file configpath ${PREFIX}/usr/share/shorewall-lite/configpath 0644
-echo "Default config path file installed as ${PREFIX}/usr/share/shorewall-lite/configpath"
+install_file configpath ${DESTDIR}${SHAREDIR}/$PRODUCT/configpath 0644
+echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/configpath"

 #
 # Install the libraries
 #
 for f in lib.* ; do
    if [ -f $f ]; then
-	install_file $f ${PREFIX}/usr/share/shorewall-lite/$f 0644
-	echo "Library ${f#*.} file installed as ${PREFIX}/usr/share/shorewall-lite/$f"
+        case $f in
+            *installer)
+                ;;
+            *)
+                install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+                echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+                ;;
+        esac
    fi
 done

-ln -sf lib.base ${PREFIX}/usr/share/shorewall-lite/functions
+ln -sf lib.base ${DESTDIR}${SHAREDIR}/$PRODUCT/functions

-echo "Common functions linked through ${PREFIX}/usr/share/shorewall-lite/functions"
+echo "Common functions linked through ${DESTDIR}${SHAREDIR}/$PRODUCT/functions"

 #
 # Install Shorecap
 #

-install_file shorecap ${PREFIX}/usr/share/shorewall-lite/shorecap 0755
+install_file shorecap ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap 0755
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap

 echo
-echo "Capability file builder installed in ${PREFIX}/usr/share/shorewall-lite/shorecap"
+echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap"

 #
-# Install wait4ifup
+# Install the Modules files
 #

-install_file wait4ifup ${PREFIX}/usr/share/shorewall-lite/wait4ifup 0755
+if [ -f modules ]; then
+    install_file modules ${DESTDIR}${SHAREDIR}/$PRODUCT/modules 0600
+    echo "Modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/modules"
+fi

-echo
-echo "wait4ifup installed in ${PREFIX}/usr/share/shorewall-lite/wait4ifup"
+if [ -f helpers ]; then
+    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 0600
+    echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
+fi

-#
-# Install the Modules file
-#
-run_install $OWNERSHIP -m 0600 modules ${PREFIX}/usr/share/shorewall-lite/modules
-echo "Modules file installed as ${PREFIX}/usr/share/shorewall-lite/modules"
+for f in modules.*; do
+    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+    echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+done

 #
 # Install the Man Pages
 #

-cd manpages
+if [ -d manpages -a -n "$MANDIR" ]; then
+    cd manpages

-for f in *.5; do
-    gzip -c $f > $f.gz
-    run_install -D -m 644 $f.gz ${PREFIX}/usr/share/man/man5/$f.gz
-    echo "Man page $f.gz installed to ${PREFIX}/usr/share/man/man5/$f.gz"
-done
+    make_parent_directory ${DESTDIR}${MANDIR}/man5 0755

-for f in *.8; do
-    gzip -c $f > $f.gz
-    run_install -D -m 644 $f.gz ${PREFIX}/usr/share/man/man8/$f.gz
-    echo "Man page $f.gz installed to ${PREFIX}/usr/share/man/man8/$f.gz"
-done
+    for f in *.5; do
+	gzip -c $f > $f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 0644
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
+    done

-cd ..
+    make_parent_directory ${DESTDIR}${MANDIR}/man8 0755

-echo "Man Pages Installed"
+    for f in *.8; do
+	gzip -c $f > $f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
+	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
+    done
+
+    cd ..
+
+    echo "Man Pages Installed"
+fi
+
+if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
+    echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
+fi

 #
 # Create the version file
 #
-echo "$VERSION" > ${PREFIX}/usr/share/shorewall-lite/version
-chmod 644 ${PREFIX}/usr/share/shorewall-lite/version
+echo "$VERSION" > ${DESTDIR}${SHAREDIR}/$PRODUCT/version
+chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 #
 # Remove and create the symbolic link to the init script
 #

-if [ -z "$PREFIX" ]; then
-    rm -f /usr/share/shorewall-lite/init
-    ln -s ${DEST}/${INIT} /usr/share/shorewall-lite/init
+if [ -z "${DESTDIR}" -a -n "${INITFILE}" ]; then
+    rm -f ${SHAREDIR}/$PRODUCT/init
+    ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
 fi

-if [ -z "$PREFIX" -a -n "$first_install" ]; then
-    if [ -n "$DEBIAN" ]; then
-	run_install $OWNERSHIP -m 0644 default.debian /etc/default/shorewall-lite
-	ln -s ../init.d/shorewall-lite /etc/rcS.d/S40shorewall-lite
-	echo "Shorewall Lite will start automatically at boot"
-	touch /var/log/shorewall-init.log
-    else
-	if [ -x /sbin/insserv -o -x /usr/sbin/insserv ]; then
-	    if insserv /etc/init.d/shorewall-lite ; then
-		echo "Shorewall Lite will start automatically at boot"
+delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/lib.common
+delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/lib.cli
+delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/wait4ifup
+
+#
+#  Creatae the symbolic link for the CLI
+#
+ln -sf shorewall ${DESTDIR}${SBINDIR}/${PRODUCT}
+
+#
+# Note -- not all packages will have the SYSCONFFILE so we need to check for its existance here
+#
+if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
+    [ ${DESTDIR} ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+
+    install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
+    echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+fi
+
+if [ ${SHAREDIR} != /usr/share ]; then
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
+fi
+
+if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
+    if [ -n "$SERVICEDIR" ]; then
+	if systemctl enable ${PRODUCT}.service; then
+	    echo "$Product will start automatically at boot"
+	fi
+    elif mywhich insserv; then
+	if insserv ${INITDIR}/${INITFILE} ; then
+	    echo "$PRODUCT will start automatically at boot"
+	    if [ $HOST = debian ]; then
+		echo "Set startup=1 in ${CONFDIR}/default/$PRODUCT to enable"
+		touch /var/log/$PRODUCT-init.log
+		perl -p -w -i -e 's/^STARTUP_ENABLED=No/STARTUP_ENABLED=Yes/;s/^IP_FORWARDING=On/IP_FORWARDING=Keep/;s/^SUBSYSLOCK=.*/SUBSYSLOCK=/;' ${CONFDIR}/$PRODUCT/$PRODUCT.conf
 	    else
-		cant_autostart
+		echo "Set STARTUP_ENABLED=Yes in ${CONFDIR}/$PRODUCT/$PRODUCT.conf to enable"
 	    fi
-	elif [ -x /sbin/chkconfig -o -x /usr/sbin/chkconfig ]; then
-	    if chkconfig --add shorewall-lite ; then
-		echo "Shorewall Lite will start automatically in run levels as follows:"
-		chkconfig --list shorewall-lite
-	    else
-		cant_autostart
-	    fi
-	elif [ -x /sbin/rc-update ]; then
-	    if rc-update add shorewall-lite default; then
-		echo "Shorewall Lite will start automatically at boot"
-	    else
-		cant_autostart
-	    fi
-	elif [ "$INIT" != rc.firewall ]; then #Slackware starts this automatically
+	else
 	    cant_autostart
 	fi
+    elif mywhich chkconfig; then
+	if chkconfig --add $PRODUCT ; then
+	    echo "$PRODUCT will start automatically in run levels as follows:"
+	    echo "Set STARTUP_ENABLED=Yes in ${CONFDIR}/$PRODUCT/${PRODUCT}.conf to enable"
+	    chkconfig --list $PRODUCT
+	else
+	    cant_autostart
+	fi
+    elif mywhich update-rc.d ; then
+	echo "$PRODUCT will start automatically at boot"
+	echo "Set startup=1 in ${CONFDIR}/default/$PRODUCT to enable"
+	touch /var/log/$PRODUCT-init.log
+	perl -p -w -i -e 's/^STARTUP_ENABLED=No/STARTUP_ENABLED=Yes/;s/^IP_FORWARDING=On/IP_FORWARDING=Keep/;s/^SUBSYSLOCK=.*/SUBSYSLOCK=/;' ${CONFDIR}/$PRODUCT/$PRODUCT.conf
+	update-rc.d $PRODUCT enable
+    elif mywhich rc-update ; then
+	if rc-update add $PRODUCT default; then
+	    echo "$PRODUCT will start automatically at boot"
+	    if [ $HOST = debian ]; then
+		echo "Set startup=1 in ${CONFDIR}/default/$PRODUCT to enable"
+		touch /var/log/$PRODUCT-init.log
+		perl -p -w -i -e 's/^STARTUP_ENABLED=No/STARTUP_ENABLED=Yes/;s/^IP_FORWARDING=On/IP_FORWARDING=Keep/;s/^SUBSYSLOCK=.*/SUBSYSLOCK=/;' ${CONFDIR}/$PRODUCT/$PRODUCT.conf
+	    else
+		echo "Set STARTUP_ENABLED=Yes in ${CONFDIR}/$PRODUCT/$PRODUCT.conf to enable"
+	    fi
+	else
+	    cant_autostart
+	fi
+    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+	/etc/init.d/$PRODUCT enable
+	if /etc/init.d/$PRODUCT enabled; then
+            echo "$PRODUCT will start automatically at boot"
+	else
+            cant_autostart
+	fi
+    elif [ "$INITFILE" != rc.${PRODUCT} ]; then #Slackware starts this automatically
+	cant_autostart
    fi
 fi

 #
-#  Report Success
+# Report Success
 #
-echo "shorewall Lite Version $VERSION Installed"
+echo "$Product Version $VERSION Installed"
--- a/Shorewall-lite/lib.base
+++ b/Shorewall-lite/lib.base
@@ -0,0 +1,33 @@
+#
+# Shorewall 4.4 -- /usr/share/shorewall-lite/lib.base
+#
+#     (c) 2011,2014 - Tom Eastep (teastep@shorewall.net)
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# This library contains the code common to all Shorewall components.
+
+g_program=shorewall-lite
+g_family=4
+#
+# This may be altered by the installer
+#
+g_basedir=/usr/share/shorewall
+
+. ${g_basedir}/lib.base
+
--- a/Shorewall-lite/logrotate
+++ b/Shorewall-lite/logrotate
@@ -0,0 +1,5 @@
+/var/log/shorewall-lite-init.log {
+  missingok
+  notifempty
+  create 0600 root root
+}
--- a/Shorewall-lite/manpages/shorewall-lite-vardir.xml
+++ b/Shorewall-lite/manpages/shorewall-lite-vardir.xml
@@ -1,9 +1,13 @@
 <?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
 <refentry>
  <refmeta>
    <refentrytitle>shorewall-lite-vardir</refentrytitle>

    <manvolnum>5</manvolnum>
+
+    <refmiscinfo>Configuration Files</refmiscinfo>
  </refmeta>

  <refnamediv>
@@ -34,6 +38,28 @@
    directory. If you add this file, you should copy the files from
    <filename>/var/lib/shorewall-lite</filename> to the new directory before
    performing a <command>shorewall-lite restart</command>.</para>
+
+    <note>
+      <para>Beginning with Shorewall 4.5.2, use of this file is deprecated in
+      favor of specifying VARDIR in the <filename>shorewallrc</filename> file
+      used during installation of Shorewall Core. While the name of the
+      variable remains VARDIR, the meaning is slightly different. When set in
+      shorewallrc, Shorewall Lite, will create a directory under the specified
+      path name to hold state information.</para>
+
+      <para>Example:</para>
+
+      <blockquote>
+        <para>VARDIR=<filename><filename>/opt/var/lib/</filename></filename></para>
+
+        <para>The state directory for Shorewall Lite will be
+        /opt/var/lib/shorewall-lite/.</para>
+      </blockquote>
+
+      <para>When VARDIR is set in /etc/shorewall-lite/vardir, Shorewall Lite
+      will save its state in the <replaceable>directory</replaceable>
+      specified.</para>
+    </note>
  </refsect1>

  <refsect1>
@@ -61,4 +87,4 @@
    shorewall-tcrules(5), shorewall-tos(5), shorewall-tunnels(5),
    shorewall-zones(5)</para>
  </refsect1>
-</refentry>
+</refentry>
--- a/Shorewall-lite/manpages/shorewall-lite.conf.xml
+++ b/Shorewall-lite/manpages/shorewall-lite.conf.xml
@@ -6,6 +6,8 @@
    <refentrytitle>shorewall-lite.conf</refentrytitle>

    <manvolnum>5</manvolnum>
+
+    <refmiscinfo>Configuration Files</refmiscinfo>
  </refmeta>

  <refnamediv>
@@ -141,7 +143,7 @@
          stops. Creating and removing this file allows Shorewall to work with
          your distribution's initscripts. For RedHat, this should be set to
          /var/lock/subsys/shorewall. For Debian, the value is
-          /var/state/shorewall and in LEAF it is /var/run/shorwall.</para>
+          /var/state/shorewall and in LEAF it is /var/run/shorewall.</para>
        </listitem>
      </varlistentry>

--- a/Shorewall-lite/manpages/shorewall-lite.xml
+++ b/Shorewall-lite/manpages/shorewall-lite.xml
@@ -0,0 +1,46 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
+<refentry>
+  <refmeta>
+    <refentrytitle>shorewall-lite</refentrytitle>
+
+    <manvolnum>8</manvolnum>
+
+    <refmiscinfo>Administrative Commands</refmiscinfo>
+  </refmeta>
+
+  <refnamediv>
+    <refname>shorewall-lite</refname>
+
+    <refpurpose>Administration tool for Shoreline Firewall Lite
+    (Shorewall-lte)</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><replaceable>command</replaceable> [
+      <replaceable>command-arguments</replaceable> ]</arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>The shorewall-lite utility is used to control the Shoreline Firewall
+    Lite (Shorewall-lite).</para>
+
+    <para>Beginning with Shorewall 5.1.0, <command>shorewall6-lite</command>
+    is a symbolic link pointing to the <ulink
+    url="/manpages/shorewall.html">shorewall</ulink>(8) executable who
+    executes the <replaceable>command</replaceable> as if its
+    <option>-6</option> and <option>-l</option> options had been
+    specified.</para>
+  </refsect1>
+</refentry>
--- a/Shorewall-lite/shorecap
+++ b/Shorewall-lite/shorecap
@@ -2,17 +2,18 @@
 #
 #     Shorewall Lite Packet Filtering Firewall Capabilities Detector
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 2006,2007 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2006,2007,2008,2009,2010,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	This file should be placed in /sbin/shorewall.
 #
 #	Shorewall documentation is available at http://shorewall.sourceforge.net
 #
+#       This program is part of Shorewall.
+#
 #	This program is free software; you can redistribute it and/or modify
-#	it under the terms of Version 2 of the GNU General Public License
-#	as published by the Free Software Foundation.
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
 #
 #	This program is distributed in the hope that it will be useful,
 #	but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -20,16 +21,14 @@
 #	GNU General Public License for more details.
 #
 #	You should have received a copy of the GNU General Public License
-#	along with this program; if not, write to the Free Software
-#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 #   This program may be used to create a /etc/shorewall/capabilities file for
 #   use in compiling Shorewall firewalls on another system.
 #
 #   On the target system (the system where the firewall program is to run):
 #
-#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] [ MODULE_SUFFIX="<module suffix list>" ] shorecap > capabilities
+#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] shorecap > capabilities
 #
 #    Now move the capabilities file to the compilation system. The file must
 #    be placed in a directory on the CONFIG_PATH to be used when compiling firewalls
@@ -39,27 +38,36 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
-#        MODULE_SUFFIX - "o gz ko o.gz ko.gz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not
 #    require Shorewall to be installed.

-SHAREDIR=/usr/share/shorewall-lite
-VARDIR=/var/lib/shorewall-lite
-CONFDIR=/etc/shorewall-lite
-PRODUCT="Shorewall Lite"

-. /usr/share/shorewall-lite/lib.base
-. /usr/share/shorewall-lite/configpath
+PRODUCT=shorewall-lite
+
+#
+# This is modified by the installer when ${SHAREDIR} != /usr/share
+#
+. /usr/share/shorewall/shorewallrc
+
+g_basedir=${SHAREDIR}/shorewall
+
+. ${SHAREDIR}/shorewall/lib.cli
+
+setup_product_environment
+
+. ${SHAREDIR}/shorewall-lite/configpath

 [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin

-VERSION=$(cat /usr/share/shorewall-lite/version)
+SHOREWALL_VERSION=$(cat /usr/share/shorewall-lite/version)

 [ -n "$IPTABLES" ] || IPTABLES=$(mywhich iptables)

-VERBOSE=0
+g_tool=$IPTABLES
+
+VERBOSITY=0
 load_kernel_modules No
 determine_capabilities
 report_capabilities1
--- a/Shorewall-lite/shorewall-lite
+++ b/Shorewall-lite/shorewall-lite
@@ -1,845 +0,0 @@
-#!/bin/sh
-#
-#     Shorewall Lite Packet Filtering Firewall Control Program - V4.1
-#
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 2006 - Tom Eastep (teastep@shorewall.net)
-#
-#	This file should be placed in /sbin/shorewall-lite.
-#
-#	Shorewall documentation is available at http://shorewall.net
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of Version 2 of the GNU General Public License
-#	as published by the Free Software Foundation.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, write to the Free Software
-#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-#     If an error occurs while starting or restarting the firewall, the
-#     firewall is automatically stopped.
-#
-#     Commands are:
-#
-#     shorewall-lite dump                          Dumps all Shorewall-related information
-#                                                  for problem analysis
-#     shorewall-lite start 			   Starts the firewall
-#     shorewall-lite restart			   Restarts the firewall
-#     shorewall-lite stop			   Stops the firewall
-#     shorewall-lite status			   Displays firewall status
-#     shorewall-lite reset			   Resets iptables packet and
-#						   byte counts
-#     shorewall-lite clear			   Open the floodgates by
-#						   removing all iptables rules
-#						   and setting the three permanent
-#						   chain policies to ACCEPT
-#     shorewall-lite show <chain> [ <chain> ... ]  Display the rules in each <chain> listed
-#     shorewall-lite show log			   Print the last 20 log messages
-#     shorewall-lite show connections		   Show the kernel's connection
-#						   tracking table
-#     shorewall-lite show nat			   Display the rules in the nat table
-#     shorewall-lite show {mangle|tos}		   Display the rules in the mangle table
-#     shorewall-lite show tc			   Display traffic control info
-#     shorewall-lite show classifiers		   Display classifiers
-#     shorewall-lite show capabilities             Display iptables/kernel capabilities
-#     shorewall-lite show vardir                   Display VARDIR setting
-#     shorewall-lite version			   Display the installed version id
-#     shorewall-lite logwatch [ refresh-interval ] Monitor the local log for Shorewall
-#						   messages.
-#     shorewall-lite drop <address> ...		   Temporarily drop all packets from the
-#						   listed address(es)
-#     shorewall-lite reject <address> ...	   Temporarily reject all packets from the
-#						   listed address(es)
-#     shorewall-lite allow <address> ...	   Reenable address(es) previously
-#						   disabled with "drop" or "reject"
-#     shorewall-lite save [ <file> ]		   Save the list of "rejected" and
-#						   "dropped" addresses so that it will
-#						   be automatically reinstated the
-#						   next time that Shorewall starts.
-#                                                  Save the current state so that 'shorewall
-#                                                  restore' can be used.
-#
-#     shorewall-lite forget [ <file> ]             Discard the data saved by 'shorewall save'
-#
-#     shorewall-lite restore [ <file> ]            Restore the state of the firewall from
-#                                                  previously saved information.
-#
-#     shorewall-lite ipaddr { <address>/<cidr> | <address> <netmask> }
-#
-#                                                  Displays information about the network
-#                                                  defined by the argument[s]
-#
-#     shorewall-lite iprange <address>-<address>   Decomposes a range of IP addresses into
-#                                                  a list of network/host addresses.
-#
-#     shorewall-lite ipdecimal { <address> | <integer> }
-#
-#                                                  Displays the decimal equivalent of an IP
-#                                                  address and vice versa.
-
-#
-# Set the configuration variables from shorewall-lite.conf
-#
-get_config() {
-
-    [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
-
-    [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages
-
-    if ( ps ax 2> /dev/null | grep -v grep |  qt grep 'syslogd.*-C' ) ; then
-	LOGREAD="logread | tac"
-    elif [ -f $LOGFILE ]; then
-	LOGREAD="tac $LOGFILE"
-    else
-	echo "LOGFILE ($LOGFILE) does not exist!" >&2
-	exit 2
-    fi
-    #
-    # See if we have a real version of "tail" -- use separate redirection so
-    # that ash (aka /bin/sh on LRP) doesn't crap
-    #
-    if ( tail -n5 /dev/null > /dev/null 2> /dev/null ) ; then
-	realtail="Yes"
-    else
-	realtail=""
-    fi
-
-    [ -n "$FW" ] || FW=fw
-
-    [ -n "LOGFORMAT" ] && LOGFORMAT="${LOGFORMAT%%%*}"
-
-    [ -n "$LOGFORMAT" ] || LOGFORMAT="Shorewall:"
-
-    export LOGFORMAT
-
-    if [ -n "$IPTABLES" ]; then
-	if [ ! -x "$IPTABLES" ]; then
-	    echo "   ERROR: The program specified in IPTABLES does not exist or is not executable" >&2
-	    exit 2
-	fi
-    else
-	IPTABLES=$(mywhich iptables 2> /dev/null)
-	if [ -z "$IPTABLES" ] ; then
-	    echo "   ERROR: Can't find iptables executable" >&2
-	    exit 2
-	fi
-    fi
-
-    export IPTABLES
-
-    if [ -n "$SHOREWALL_SHELL" ]; then
-	if [ ! -x "$SHOREWALL_SHELL" ]; then
-	    echo "   WARNING: The program specified in SHOREWALL_SHELL does not exist or is not executable; falling back to /bin/sh" >&2
-	    SHOREWALL_SHELL=/bin/sh
-	fi
-    fi
-
-    [ -n "$RESTOREFILE" ] || RESTOREFILE=restore
-
-    validate_restorefile RESTOREFILE
-
-    export RESTOREFILE
-
-    [ -n "${VERBOSITY:=2}" ]
-
-    [ -n "$USE_VERBOSITY" ] && VERBOSE=$USE_VERBOSITY || VERBOSE=$(($VERBOSE_OFFSET + $VERBOSITY))
-
-    export VERBOSE
-
-    [ -n "${HOSTNAME:=$(hostname)}" ]
-
-}
-
-#
-# Verify that we have a compiled firewall script
-#
-verify_firewall_script() {
-    if [ ! -f $FIREWALL ]; then
-	echo "   ERROR: Shorewall Lite is not properly installed" >&2
-	if [ -L $FIREWALL ]; then
-	    echo "          $FIREWALL is a symbolic link to a" >&2
-	    echo "          non-existant file" >&2
-	else
-	    echo "          The file $FIREWALL does not exist" >&2
-	fi
-	
-	exit 2
-    fi
-}
-
-#
-# Start Command Executor
-#
-start_command() {
-    local finished
-    finished=0
-
-    do_it() {
-	local rc
-	rc=0
-	[ -n "$nolock" ] || mutex_on
-
-	if [ -x ${LITEDIR}/firewall ]; then
-	    ${LITEDIR}/firewall $debugging start
-	    rc=$?
-	else
-	    error_message "${LITEDIR}/firewall is missing or is not executable"
-	    logger -p kern.err "ERROR:Shorewall Lite start failed"
-	    rc=2
-	fi
-
-	[ -n "$nolock" ] || mutex_off
-	exit $rc
-    }
-
-    verify_firewall_script
-
-    if shorewall_is_started; then
-	error_message "Shorewall is already running"
-	exit 0
-    fi
-
-    while [ $finished -eq 0 -a $# -gt 0 ]; do
-	option=$1
-	case $option in
-	    -*)
-		option=${option#-}
-
-		while [ -n "$option" ]; do
-		    case $option in
-			-)
-			    finished=1
-			    option=
-			    ;;
-			f*)
-			    FAST=Yes
-			    option=${option#f}
-			    ;;
-			p*)
-			    [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system"
-			    PURGE=Yes
-			    option=${option%p}
-			    ;;
-			*)
-			    usage 1
-			    ;;
-		    esac
-		done
-		shift
-		;;
-	    *)
-		finished=1
-		;;
-	esac
-    done
-
-    case $# in
-	0)
-	    ;;
-	*)
-	    usage 1
-	    ;;
-    esac
-
-    export NOROUTES
-
-    if [ -n "$FAST" ]; then
-	if qt mywhich make; then
-	    #
-	    # RESTOREFILE is exported by get_config()
-	    #
-	    make -qf ${CONFDIR}/Makefile || FAST=
-	fi
-
-	if [ -n "$FAST" ]; then
-
-	    RESTOREPATH=${VARDIR}/$RESTOREFILE
-
-	    if [ -x $RESTOREPATH ]; then
-		if [ -x ${RESTOREPATH}-ipsets ]; then
-		    echo Restoring Ipsets...
-		    #
-		    # We must purge iptables to be sure that there are no
-		    # references to ipsets
-		    #
-		    iptables -F
-		    iptables -X
-		    $SHOREWALL_SHELL ${RESTOREPATH}-ipsets
-		fi
-
-		echo Restoring Shorewall Lite...
-		$SHOREWALL_SHELL $RESTOREPATH restore
-		date > ${VARDIR}/restarted
-		progress_message3 Shorewall Lite restored from $RESTOREPATH
-	    else
-		do_it
-	    fi
-	else
-	    do_it
-	fi
-    else
-	do_it
-    fi
-}
-
-#
-# Restart Command Executor
-#
-restart_command() {
-    local finished
-    finished=0
-    local rc
-    rc=0
-
-    verify_firewall_script
-
-    while [ $finished -eq 0 -a $# -gt 0 ]; do
-	option=$1
-	case $option in
-	    -*)
-		option=${option#-}
-
-		while [ -n "$option" ]; do
-		    case $option in
-			-)
-			    finished=1
-			    option=
-			    ;;
-			n*)
-			    NOROUTES=Yes
-			    option=${option#n}
-			    ;;
-			p*)
-			    [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system"
-			    PURGE=Yes
-			    option=${option%p}
-			    ;;
-			*)
-			    usage 1
-			    ;;
-		    esac
-		done
-		shift
-		;;
-	    *)
-		finished=1
-		;;
-	esac
-    done
-
-    case $# in
-	0)
-	    ;;
-	*)
-	    usage 1
-	    ;;
-    esac
-
-    export NOROUTES
-
-    [ -n "$nolock" ] || mutex_on
-
-    if [ -x ${LITEDIR}/firewall ]; then
-	$SHOREWALL_SHELL ${LITEDIR}/firewall $debugging restart
-	rc=$?
-    else
-	error_message "${LITEDIR}/firewall is missing or is not executable"
-	logger -p kern.err "ERROR:Shorewall Lite restart failed"
-	rc=2
-    fi
-
-    [ -n "$nolock" ] || mutex_off
-    return $rc
-}
-
-#
-# Give Usage Information
-#
-usage() # $1 = exit status
-{
-    echo "Usage: $(basename $0) [debug|trace] [nolock] [ -q ] [ -v[-1|{0-2}] ] [ -t ] <command>"
-    echo "where <command> is one of:"
-    echo "   allow <address> ..."
-    echo "   clear"
-    echo "   drop <address> ..."
-    echo "   dump [ -x ]"
-    echo "   forget [ <file name> ]"
-    echo "   help"
-    echo "   hits [ -t ]"
-    echo "   ipcalc { <address>/<vlsm> | <address> <netmask> }"
-    echo "   ipdecimal { <address> | <integer> }"
-    echo "   iprange <address>-<address>"
-    echo "   logdrop <address> ..."
-    echo "   logreject <address> ..."
-    echo "   logwatch [<refresh interval>]"
-    echo "   reject <address> ..."
-    echo "   reset [ <chain> ... ]"
-    echo "   restart [ -n ] [ -p ]"
-    echo "   restore [ -n ] [ <file name> ]"
-    echo "   save [ <file name> ]"
-    echo "   show [ -x ] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]"
-    echo "   show [ -f ] capabilities"
-    echo "   show classifiers"
-    echo "   show config"
-    echo "   show connections"
-    echo "   show dynamic <zone>"
-    echo "   show filter"
-    echo "   show ip"
-    echo "   show [ -m ] log"
-    echo "   show [ -x ] mangle|nat|raw"
-    echo "   show routing"
-    echo "   show tc"
-    echo "   show vardir"
-    echo "   show zones"
-    echo "   start [ -n ] [ -p ]"
-    echo "   stop"
-    echo "   status"
-    echo "   version"
-    echo
-    exit $1
-}
-
-#
-# Execution begins here
-#
-debugging=
-
-if [ $# -gt 0 ] && [ "$1" = "debug" -o "$1" = "trace" ]; then
-    debugging=$1
-    shift
-fi
-
-nolock=
-
-if [ $# -gt 0 ] && [ "$1" = "nolock" ]; then
-    nolock=nolock
-    shift
-fi
-
-IPT_OPTIONS="-nv"
-FAST=
-VERBOSE_OFFSET=0
-USE_VERBOSITY=
-NOROUTES=
-EXPORT=
-export TIMESTAMP=
-noroutes=
-
-finished=0
-
-while [ $finished -eq 0 ]; do
-    [ $# -eq 0 ] && usage 1
-    option=$1
-    case $option in
-	-)
-	    finished=1
-	    ;;
-	-*)
-	    option=${option#-}
-
-	    [ -z "$option" ] && usage 1
-
-	    while [ -n "$option" ]; do
-		case $option in
-		    x*)
-			IPT_OPTIONS="-xnv"
-			option=${option#x}
-			;;
-		    q*)
-			VERBOSE_OFFSET=$(($VERBOSE_OFFSET - 1 ))
-			option=${option#q}
-			;;
-		    f*)
-			FAST=Yes
-			option=${option#f}
-			;;
-		    v*)
-			option=${option#v}
-			case $option in 
-			    -1*)
-				USE_VERBOSITY=-1
-				option=${option#-1}
-				;;
-			    0*)
-				USE_VERBOSITY=0
-				option=${option#0}
-				;;
-			    1*)
-				USE_VERBOSITY=1
-				option=${option#1}
-				;;
-			    2*)
-				USE_VERBOSITY=2
-				option=${option#2}
-				;;
-			    *)
-				VERBOSE_OFFSET=$(($VERBOSE_OFFSET + 1 ))
-				USE_VERBOSITY=
-				;;
-			esac
-			;;
-		    n*)
-			NOROUTES=Yes
-			option=${option#n}
-			;;
-		    t*)
-			TIMESTAMP=Yes
-			option=${option#t}
-			;;
-		    -)
-			finished=1
-			option=
-			;;
-		    *)
-			usage 1
-			;;
-		esac
-	    done
-	    shift
-	    ;;
-	*)
-	    finished=1
-            ;;
-    esac
-done
-
-if [ $# -eq 0 ]; then
-    usage 1
-fi
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
-export PATH
-MUTEX_TIMEOUT=
-
-SHAREDIR=/usr/share/shorewall-lite
-CONFDIR=/etc/shorewall-lite
-export PRODUCT="Shorewall Lite"
-
-[ -f ${CONFDIR}/vardir ] && . ${CONFDIR}/vardir ]
-
-[ -n "${VARDIR:=/var/lib/shorewall-lite}" ]
-
-[ -d $VARDIR ] || mkdir -p $VARDIR || fatal_error "Unable to create $VARDIR"
-
-LIBRARIES="$SHAREDIR/lib.base $SHAREDIR/lib.cli"
-VERSION_FILE=$SHAREDIR/version
-HELP=$SHAREDIR/help
-
-for library in $LIBRARIES; do
-    if [ -f $library ]; then
-	. $library
-    else
-	echo "Installation error: $library does not exist!" >&2
-	exit 2
-    fi
-done
-
-ensure_config_path
-
-config=$(find_file shorewall-lite.conf)
-
-if [ -f $config ]; then
-    if [ -r $config ]; then
-	. $config
-    else
-	echo "Cannot read $config! (Hint: Are you root?)" >&2
-	exit 1
-    fi
-else
-    echo "$config does not exist!" >&2
-    exit 2
-fi
-
-ensure_config_path
-export CONFIG_PATH
-
-LITEDIR=${VARDIR}
-
-[ -f ${LITEDIR}/firewall.conf ] && . ${LITEDIR}/firewall.conf
-
-get_config
-
-FIREWALL=$LITEDIR/firewall
-
-if [ -f $VERSION_FILE ]; then
-    version=$(cat $VERSION_FILE)
-else
-    echo "   ERROR: Shorewall Lite is not properly installed" >&2
-    echo "          The file $VERSION_FILE does not exist" >&2
-    exit 1
-fi
-
-banner="Shorewall Lite $version Status at $HOSTNAME -"
-
-case $(echo -e) in
-    -e*)
-	RING_BELL="echo \a"
-	ECHO_E="echo"
-	;;
-    *)
-	RING_BELL="echo -e \a"
-	ECHO_E="echo -e"
-	;;
-esac
-
-case $(echo -n "Testing") in
-    -n*)
-	ECHO_N=
-	;;
-    *)
-	ECHO_N=-n
-	;;
-esac
-
-COMMAND=$1
-
-case "$COMMAND" in
-    start)
-	shift
-	start_command $@
-	;;
-    stop|clear)
-	[ $# -ne 1 ] && usage 1
-	verify_firewall_script
-	export NOROUTES
-	exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock $COMMAND
-	;;
-    reset)
-	verify_firewall_script
-	exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock $@
-	;;
-    restart)
-	shift
-	restart_command
-	;;
-    show|list)
-    	shift
-    	show_command $@
-	;;
-    status)
-	[ $# -eq 1 ] || usage 1
-	[ "$(id -u)" != 0 ] && fatal_error "ERROR: The status command may only be run by root"
-	echo "Shorewall Lite $version Status at $HOSTNAME - $(date)"
-	echo
-	if shorewall_is_started ; then
-	    echo "Shorewall Lite is running"
-	    status=0
-	else
-	    echo "Shorewall Lite is stopped"
-	    status=4
-	fi
-
-	if [ -f ${VARDIR}/state ]; then
-	    state="$(cat ${VARDIR}/state)"
-	    case $state in
-		Stopped*|Clear*)
-		    status=3
-		    ;;
-	    esac
-	else
-	    state=Unknown
-	fi
-	echo "State:$state"
-	echo
-	exit $status
-	;;
-    dump)
-    	shift
-    	dump_command $@
-	;;
-    hits)
-	[ -n "$debugging" ] && set -x
-	shift
-	hits_command $@
-	;;
-    version)
-	echo $version Lite
-	;;
-    logwatch)
-	logwatch_command $@
-	;;
-    drop)
-	[ -n "$debugging" ] && set -x
-	[ $# -eq 1 ] && usage 1
-	if shorewall_is_started ; then
-	    [ -n "$nolock" ] || mutex_on
-	    block DROP Dropped $*
-	    [ -n "$nolock" ] || mutex_off
-	else
-	    error_message "ERROR: Shorewall Lite is not started"
-	    exit 2
-	fi
-	;;
-    logdrop)
-	[ -n "$debugging" ] && set -x
-	[ $# -eq 1 ] && usage 1
-	if shorewall_is_started ; then
-	    [ -n "$nolock" ] || mutex_on
-	    block logdrop Dropped $*
-	    [ -n "$nolock" ] || mutex_off
-	else
-	    error_message "ERROR: Shorewall Lite is not started"
-	    exit 2
-	fi
-	;;
-    reject|logreject)
-	[ -n "$debugging" ] && set -x
-	[ $# -eq 1 ] && usage 1
-	if shorewall_is_started ; then
-	    [ -n "$nolock" ] || mutex_on
-	    block $COMMAND Rejected $*
-	    [ -n "$nolock" ] || mutex_off
-	else
-	    error_message "ERROR: Shorewall Lite is not started"
-	    exit 2
-	fi
-	;;
-    allow)
-	allow_command $@
-	;;
-    add)
-	get_config
-	shift
-	add_command $@
-	;;
-    delete)
-	get_config
-	shift
-	add_command $@
-	;;
-    save)
-	[ -n "$debugging" ] && set -x
-
-	case $# in
-	1)
-	    ;;
-	2)
-	    RESTOREFILE="$2"
-	    validate_restorefile '<restore file>'
-	    ;;
-	*)
-	    usage 1
-	    ;;
-	esac
-
-	RESTOREPATH=${VARDIR}/$RESTOREFILE
-
-	[ "$nolock" ] || mutex_on
-
-	save_config
-
-	[ "$nolock" ] || mutex_off
-	;;
-    forget)
-	case $# in
-	1)
-	    ;;
-	2)
-	    RESTOREFILE="$2"
-	    validate_restorefile '<restore file>'
-	    ;;
-	*)
-	    usage 1
-	    ;;
-	esac
-
-
-	RESTOREPATH=${VARDIR}/$RESTOREFILE
-
-	if [ -x $RESTOREPATH ]; then
-
-	    if [ -x ${RESTOREPATH}-ipsets ]; then
-		rm -f ${RESTOREPATH}-ipsets
-		echo "    ${RESTOREPATH}-ipsets removed"
-	    fi
-
-	    rm -f $RESTOREPATH
-	    rm -f ${RESTOREPATH}-iptables
-	    echo "    $RESTOREPATH removed"
-	elif [ -f $RESTOREPATH ]; then
-	    echo "   $RESTOREPATH exists and is not a saved Shorewall configuration"
-	fi
-	rm -f ${VARDIR}/save
-	;;
-    ipcalc)
-    	[ -n "$debugging" ] && set -x
-	if [ $# -eq 2 ]; then
-	    address=${2%/*}
-	    vlsm=${2#*/}
-	elif [ $# -eq 3 ]; then
-	    address=$2
-	    vlsm=$(ip_vlsm $3)
-	else
-	    usage 1
-	fi
-
-	valid_address $address || fatal_error "Invalid IP address: $address"
-	[ -z "$vlsm" ] && exit 2
-	[ "x$address" = "x$vlsm" ] && usage 2
-	[ $vlsm -gt 32 ] && echo "Invalid VLSM: /$vlsm" >&2 && exit 2
-
-	address=$address/$vlsm
-
-	                                   echo "   CIDR=$address"
-	temp=$(ip_netmask $address);       echo "   NETMASK=$(encodeaddr $temp)"
-	temp=$(ip_network $address);       echo "   NETWORK=$temp"
-	temp=$(broadcastaddress $address); echo "   BROADCAST=$temp"
-	;;
-
-    iprange)
-	[ -n "$debugging" ] && set -x
-	case $2 in
-	    *.*.*.*-*.*.*.*)
-		for address in ${2%-*} ${2#*-}; do
-		    valid_address $address || fatal_error "Invalid IP address: $address"
-		done
-
-		ip_range $2
-		;;
-	    *)
-		usage 1
-		;;
-	esac
-	;;
-    ipdecimal)
-	[ -n "$debugging" ] && set -x
-	[ $# -eq 2 ] || usage 1
-	case $2 in
-	    *.*.*.*)
-		valid_address $2 || fatal_error "Invalid IP address: $2"
-		echo "   $(decodeaddr $2)"
-		;;
-	    *)
-		echo "   $(encodeaddr $2)"
-		;;
-	esac
-	;;
-    restore)
-	shift
-	STARTUP_ENABLED=Yes
-	restore_command $@
-        ;;
-    call)
-	[ -n "$debugging" ] && set -x
-	#
-	# Undocumented way to call functions in ${SHAREDIR}/functions directly
-	#
-	shift
-	$@
-	;;
-    help)
-	shift
-	usage
-	;;
-    *)
-	usage 1
-	;;
-
-esac
--- a/Shorewall-lite/shorewall-lite.conf
+++ b/Shorewall-lite/shorewall-lite.conf
@@ -1,15 +1,14 @@
 ###############################################################################
-#  /etc/shorewall-lite/shorewall-lite.conf Version 4 - Change the following 
+#  /etc/shorewall-lite/shorewall-lite.conf Version 5 - Change the following
 #  variables to override the values in the shorewall.conf file used to
 #  compile /var/lib/shorewall-lite/firewall. Those values may be found in
 #  /var/lib/shorewall-lite/firewall.conf.
 #
-#  This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#  This file should be placed in /etc/shorewall-lite
-#
-#  (c) 2006,2007 - Tom Eastep (teastep@shorewall.net)
+#  For information about the settings in this file, type
+#  "man shorewall-lite.conf"
 #
+#  Manpage also online at
+#  http://www.shorewall.net/manpages/shorewall-lite.conf.html
 ###############################################################################
 #                                   N 0 T E
 ###############################################################################
@@ -22,6 +21,7 @@
 ###############################################################################
 #		              V E R B O S I T Y
 ###############################################################################
+
 VERBOSITY=

 ###############################################################################
@@ -30,8 +30,6 @@ VERBOSITY=

 LOGFILE=

-LOGFORMAT=
-
 ###############################################################################
 #	L O C A T I O N	  O F	F I L E S   A N D   D I R E C T O R I E S
 ###############################################################################
--- a/Shorewall-lite/shorewall-lite.service
+++ b/Shorewall-lite/shorewall-lite.service
@@ -0,0 +1,21 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#
+[Unit]
+Description=Shorewall IPv4 firewall (lite)
+Wants=network-online.target
+After=network-online.target
+Conflicts=iptables.service firewalld.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/sysconfig/shorewall-lite
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
+ExecStop=/sbin/shorewall-lite $OPTIONS stop
+
+[Install]
+WantedBy=basic.target
--- a/Shorewall-lite/shorewall-lite.service.debian
+++ b/Shorewall-lite/shorewall-lite.service.debian
@@ -0,0 +1,23 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
+#
+[Unit]
+Description=Shorewall IPv4 firewall (lite)
+Wants=network-online.target
+After=network-online.target
+Conflicts=iptables.service firewalld.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/default/shorewall-lite
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
+ExecStop=/sbin/shorewall-lite $OPTIONS clear
+ExecReload=/sbin/shorewall-lite $OPTIONS reload $RELOADOPTIONS
+
+[Install]
+WantedBy=basic.target
--- a/Shorewall-lite/shorewall-lite.spec
+++ b/Shorewall-lite/shorewall-lite.spec
@@ -1,270 +0,0 @@
-%define name shorewall-lite
-%define version 4.4.0
-%define release 1
-
-Summary: Shoreline Firewall Lite is an iptables-based firewall for Linux systems.
-Name: %{name}
-Version: %{version}
-Release: %{release}
-License: GPLv2
-Packager: Tom Eastep <teastep@shorewall.net>
-Group: Networking/Utilities
-Source: %{name}-%{version}.tgz
-URL: http://www.shorewall.net/
-BuildArch: noarch
-BuildRoot: %{_tmppath}/%{name}-%{version}-root
-Requires: iptables iproute
-
-%description
-
-The Shoreline Firewall, more commonly known as "Shorewall", is a Netfilter
-(iptables) based firewall that can be used on a dedicated firewall system,
-a multi-function gateway/ router/server or on a standalone GNU/Linux system.
-
-Shorewall Lite is a companion product to Shorewall that allows network
-administrators to centralize the configuration of Shorewall-based firewalls.
-
-%prep
-
-%setup
-
-%build
-
-%install
-export PREFIX=$RPM_BUILD_ROOT ; \
-export OWNER=`id -n -u` ; \
-export GROUP=`id -n -g` ;\
-./install.sh
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%pre
-
-if [ -f /etc/shorewall-lite/shorewall.conf ]; then
-    cp -fa /etc/shorewall-lite/shorewall.conf /etc/shorewall-lite/shorewall.conf.rpmsave
-fi
-
-%post
-
-if [ $1 -eq 1 ]; then
-    if [ -x /sbin/insserv ]; then
-	/sbin/insserv /etc/rc.d/shorewall-lite
-    elif [ -x /sbin/chkconfig ]; then
-	/sbin/chkconfig --add shorewall-lite;
-    fi
-elif [ -f /etc/shorewall-lite/shorewall.conf.rpmsave ]; then
-    mv -f /etc/shorewall-lite/shorewall-lite.conf /etc/shorewall-lite/shorewall-lite.conf.rpmnew
-    mv -f /etc/shorewall-lite/shorewall.conf.rpmsave /etc/shorewall-lite/shorewall-lite.conf
-    echo "/etc/shorewall-lite/shorewall.conf retained as /etc/shorewall-lite/shorewall-lite.conf"
-    echo "/etc/shorewall-lite/shorewall-lite.conf installed as /etc/shorewall-lite/shorewall-lite.conf.rpmnew"
-fi
-
-%preun
-
-if [ $1 -eq 0 ]; then
-    if [ -x /sbin/insserv ]; then
-	/sbin/insserv -r /etc/init.d/shorewall-lite
-    elif [ -x /sbin/chkconfig ]; then
-	/sbin/chkconfig --del shorewall-lite
-    fi
-fi
-
-%files
-%defattr(0644,root,root,0755)
-%attr(0755,root,root) %dir /etc/shorewall-lite
-%attr(0644,root,root) %config(noreplace) /etc/shorewall-lite/shorewall-lite.conf
-%attr(0644,root,root) /etc/shorewall-lite/Makefile
-%attr(0544,root,root) /etc/init.d/shorewall-lite
-%attr(0755,root,root) %dir /usr/share/shorewall-lite
-%attr(0700,root,root) %dir /var/lib/shorewall-lite
-
-%attr(0755,root,root) /sbin/shorewall-lite
-
-%attr(0644,root,root) /usr/share/shorewall-lite/version
-%attr(0644,root,root) /usr/share/shorewall-lite/configpath
-%attr(-   ,root,root) /usr/share/shorewall-lite/functions
-%attr(0644,root,root) /usr/share/shorewall-lite/lib.base
-%attr(0644,root,root) /usr/share/shorewall-lite/lib.cli
-%attr(0644,root,root) /usr/share/shorewall-lite/modules
-%attr(0544,root,root) /usr/share/shorewall-lite/shorecap
-%attr(0755,root,root) /usr/share/shorewall-lite/wait4ifup
-
-%attr(0644,root,root) %{_mandir}/man5/shorewall-lite.conf.5.gz
-%attr(0644,root,root) %{_mandir}/man5/shorewall-lite-vardir.5.gz
-
-%attr(0644,root,root) %{_mandir}/man8/shorewall-lite.8.gz
-
-%doc COPYING changelog.txt releasenotes.txt
-
-%changelog
-* Thu Aug 13 2009 Tom Eastep tom@shorewall.net
- Updated to 4.4.0-1
-* Mon Aug 03 2009 Tom Eastep tom@shorewall.net
- Updated to 4.4.0-0base
-* Tue Jul 28 2009 Tom Eastep tom@shorewall.net
- Updated to 4.4.0-0RC2
-* Sun Jul 12 2009 Tom Eastep tom@shorewall.net
- Updated to 4.4.0-0RC1
-* Thu Jul 09 2009 Tom Eastep tom@shorewall.net
- Updated to 4.4.0-0Beta4
-* Sat Jun 27 2009 Tom Eastep tom@shorewall.net
- Updated to 4.4.0-0Beta3
-* Mon Jun 15 2009 Tom Eastep tom@shorewall.net
- Updated to 4.4.0-0Beta2
-* Fri Jun 12 2009 Tom Eastep tom@shorewall.net
- Updated to 4.4.0-0Beta1
-* Sun Jun 07 2009 Tom Eastep tom@shorewall.net
- Updated to 4.3.13-0base
-* Fri Jun 05 2009 Tom Eastep tom@shorewall.net
- Updated to 4.3.12-0base
-* Sun May 10 2009 Tom Eastep tom@shorewall.net
- Updated to 4.3.11-0base
-* Sun Apr 19 2009 Tom Eastep tom@shorewall.net
- Updated to 4.3.10-0base
-* Sat Apr 11 2009 Tom Eastep tom@shorewall.net
- Updated to 4.3.9-0base
-* Tue Mar 17 2009 Tom Eastep tom@shorewall.net
- Updated to 4.3.8-0base
-* Sun Mar 01 2009 Tom Eastep tom@shorewall.net
- Updated to 4.3.7-0base
-* Fri Feb 27 2009 Tom Eastep tom@shorewall.net
- Updated to 4.3.6-0base
-* Sun Feb 22 2009 Tom Eastep tom@shorewall.net
- Updated to 4.3.5-0base
-* Wed Feb 04 2009 Tom Eastep tom@shorewall.net
- Updated to 4.2.6-0base
-* Thu Jan 29 2009 Tom Eastep tom@shorewall.net
- Updated to 4.2.6-0base
-* Tue Jan 06 2009 Tom Eastep tom@shorewall.net
- Updated to 4.2.5-0base
-* Thu Dec 25 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.4-0base
-* Fri Dec 05 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.3-0base
-* Wed Nov 05 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.2-0base
-* Wed Oct 08 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.1-0base
-* Fri Oct 03 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.0-0base
-* Tue Sep 23 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.0-0RC4
-* Mon Sep 15 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.0-0RC3
-* Mon Sep 08 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.0-0RC2
-* Tue Aug 19 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.0-0RC1
-* Thu Jul 03 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.0-0Beta3
-* Mon Jun 02 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.0-0Beta2
-* Wed May 07 2008 Tom Eastep tom@shorewall.net
- Updated to 4.2.0-0Beta1
-* Mon Apr 28 2008 Tom Eastep tom@shorewall.net
- Updated to 4.1.8-0base
-* Mon Mar 24 2008 Tom Eastep tom@shorewall.net
- Updated to 4.1.7-0base
-* Thu Mar 13 2008 Tom Eastep tom@shorewall.net
- Updated to 4.1.6-0base
-* Tue Feb 05 2008 Tom Eastep tom@shorewall.net
- Updated to 4.1.5-0base
-* Fri Jan 04 2008 Tom Eastep tom@shorewall.net
- Updated to 4.1.4-0base
-* Wed Dec 12 2007 Tom Eastep tom@shorewall.net
- Updated to 4.1.3-0base
-* Fri Dec 07 2007 Tom Eastep tom@shorewall.net
- Updated to 4.1.3-1
-* Tue Nov 27 2007 Tom Eastep tom@shorewall.net
- Updated to 4.1.2-1
-* Wed Nov 21 2007 Tom Eastep tom@shorewall.net
- Updated to 4.1.1-1
-* Mon Nov 19 2007 Tom Eastep tom@shorewall.net
- Updated to 4.1.0-1
-* Thu Nov 15 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.6-1
-* Sat Nov 10 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.6-0RC3
-* Wed Nov 07 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.6-0RC2
-* Thu Oct 25 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.6-0RC1
-* Tue Oct 03 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.5-1
-* Wed Sep 05 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.4-1
-* Mon Aug 13 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.3-1
-* Thu Aug 09 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.2-1
-* Sat Jul 21 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.1-1
-* Wed Jul 11 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.0-1
-* Sun Jul 08 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.0-0RC2
-* Mon Jul 02 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.0-0RC1
-* Sun Jun 24 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.0-0Beta7
-* Wed Jun 20 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.0-0Beta6
-* Thu Jun 14 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.0-0Beta5
-* Fri Jun 08 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.0-0Beta4
-* Tue Jun 05 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.0-0Beta3
-* Tue May 15 2007 Tom Eastep tom@shorewall.net
- Updated to 4.0.0-0Beta1
-* Fri May 11 2007 Tom Eastep tom@shorewall.net
- Updated to 3.9.7-1
-* Sat May 05 2007 Tom Eastep tom@shorewall.net
- Updated to 3.9.6-1
-* Mon Apr 30 2007 Tom Eastep tom@shorewall.net
- Updated to 3.9.5-1
-* Mon Apr 23 2007 Tom Eastep tom@shorewall.net
- Updated to 3.9.4-1
-* Wed Apr 18 2007 Tom Eastep tom@shorewall.net
- Updated to 3.9.3-1
-* Sat Apr 14 2007 Tom Eastep tom@shorewall.net
- Updated to 3.9.2-1
-* Sat Apr 07 2007 Tom Eastep tom@shorewall.net
- Updated to 3.9.1-1
-* Thu Mar 15 2007 Tom Eastep tom@shorewall.net
- Updated to 3.4.1-1
-* Sat Mar 10 2007 Tom Eastep tom@shorewall.net
- Updated to 3.4.0-1
-* Sun Feb 25 2007 Tom Eastep tom@shorewall.net
- Updated to 3.4.0-0RC3
-* Sun Feb 04 2007 Tom Eastep tom@shorewall.net
- Updated to 3.4.0-0RC2
-* Wed Jan 24 2007 Tom Eastep tom@shorewall.net
- Updated to 3.4.0-0RC1
-* Mon Jan 22 2007 Tom Eastep tom@shorewall.net
- Updated to 3.4.0-0Beta3
-* Wed Jan 03 2007 Tom Eastep tom@shorewall.net
- Updated to 3.4.0-0Beta2
- Handle rename of shorewall.conf
-* Thu Dec 14 2006 Tom Eastep tom@shorewall.net
- Updated to 3.4.0-0Beta1
-* Sat Nov 25 2006 Tom Eastep tom@shorewall.net
- Added shorewall-exclusion(5)
- Updated to 3.3.6-1
-* Sun Nov 19 2006 Tom Eastep tom@shorewall.net
- Updated to 3.3.5-1
-* Sun Oct 29 2006 Tom Eastep tom@shorewall.net
- Updated to 3.3.4-1
-* Mon Oct 16 2006 Tom Eastep tom@shorewall.net
- Updated to 3.3.3-1
-* Sat Sep 30 2006 Tom Eastep tom@shorewall.net
- Updated to 3.3.2-1
-* Wed Aug 30 2006 Tom Eastep tom@shorewall.net
- Updated to 3.3.1-1
-* Wed Aug 09 2006 Tom Eastep tom@shorewall.net
- Updated to 3.3.0-1
-* Wed Aug 09 2006 Tom Eastep tom@shorewall.net
- Updated to 3.3.0-1
-
-
--- a/Shorewall-lite/sysconfig
+++ b/Shorewall-lite/sysconfig
@@ -0,0 +1,26 @@
+#
+# Global start/restart/reload/stop options
+#
+OPTIONS=""
+
+#
+# Start options
+#
+STARTOPTIONS=""
+
+#
+# Restart options
+#
+RESTARTOPTIONS=""
+
+#
+# Reload options
+#
+RELOADOPTIONS=""
+
+#
+# Stop options
+#
+STOPOPTIONS=""
+
+# EOF
--- a/Shorewall-lite/uninstall.sh
+++ b/Shorewall-lite/uninstall.sh
@@ -1,112 +1,207 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall
+# Script to back uninstall Shoreline Firewall Lite
 #
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 2000,2001,2002,2003,2004,2005,2006,2007 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.sourceforge.net
 #
-#       This program is free software; you can redistribute it and/or modify
-#       it under the terms of Version 2 of the GNU General Public License
-#       as published by the Free Software Foundation.
+#       This program is part of Shorewall.
 #
-#       This program is distributed in the hope that it will be useful,
-#       but WITHOUT ANY WARRANTY; without even the implied warranty of
-#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#       GNU General Public License for more details.
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
 #
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 #    Usage:
 #
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall

-VERSION=4.4.0.1
+VERSION=xxx # The Build script inserts the actual version

 usage() # $1 = exit status
 {
    ME=$(basename $0)
-    echo "usage: $ME"
+    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
+    echo "where <option> is one of"
+    echo "  -h"
+    echo "  -v"
+    echo "  -n"
    exit $1
 }

-qt()
-{
-    "$@" >/dev/null 2>&1
-}
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"

-restore_file() # $1 = file to restore
-{
-    if [ -f ${1}-shorewall.bkout ]; then
-	if (mv -f ${1}-shorewall-lite.bkout $1); then
-	    echo
-	    echo "$1 restored"
-        else
-	    exit 1
-        fi
+if [ -f shorewall-lite.service ]; then
+    PRODUCT=shorewall-lite
+    Product="Shorewall Lite"
+else
+    PRODUCT=shorewall6-lite
+    Product="Shorewall6 Lite"
+fi
+
+#
+# Source common functions
+#
+. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+
+#
+# Parse the run line
+#
+finished=0
+configure=1
+
+while [ $finished -eq 0 ]; do
+    option=$1
+
+    case "$option" in
+	-*)
+	    option=${option#-}
+
+	    while [ -n "$option" ]; do
+		case $option in
+		    h)
+			usage 0
+			;;
+		    v)
+			echo "$Product Firewall Uninstaller Version $VERSION"
+			exit 0
+			;;
+		    n*)
+			configure=0
+			option=${option#n}
+			;;
+		    *)
+			usage 1
+			;;
+		esac
+	    done
+
+	    shift
+	    ;;
+	*)
+	    finished=1
+	    ;;
+    esac
+done
+
+#
+# Read the RC file
+#
+if [ $# -eq 0 ]; then
+    if [ -f ./shorewallrc ]; then
+        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+    elif [ -f ~/.shorewallrc ]; then
+        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+    elif [ -f /usr/share/shorewall/shorewallrc ]; then
+        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+    else
+	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
    fi
-}
+elif [ $# -eq 1 ]; then
+    file=$1
+    case $file in
+	/*|.*)
+	    ;;
+	*)
+	    file=./$file || exit 1
+	    ;;
+    esac

-remove_file() # $1 = file to restore
-{
-    if [ -f $1 -o -L $1 ] ; then
-	rm -f $1
-	echo "$1 Removed"
-    fi
-}
+    . $file || fatal_error "Can not load the RC file: $file"
+else
+    usage 1
+fi

-if [ -f /usr/share/shorewall-lite/version ]; then
-    INSTALLED_VERSION="$(cat /usr/share/shorewall-lite/version)"
+if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
    if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: Shorewall Lite Version $INSTALLED_VERSION is installed"
+	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
    fi
 else
-    echo "WARNING: Shorewall Lite Version $VERSION is not installed"
+    echo "WARNING: $Product Version $VERSION is not installed"
    VERSION=""
 fi

-echo "Uninstalling Shorewall Lite $VERSION"
+echo "Uninstalling $Product $VERSION"

-if qt iptables -L shorewall -n && [ ! -f /sbin/shorewall ]; then
-   /sbin/shorewall-lite clear
+[ -n "$SANDBOX" ] && configure=0
+
+if [ $configure -eq 1 ]; then
+    if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
+	${SBINDIR}/$PRODUCT clear
+    elif qt ip6tables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall6 ]; then
+	${SBINDIR}/$PRODUCT clear
+    fi
 fi

-if [ -L /usr/share/shorewall-lite/init ]; then
-    FIREWALL=$(ls -l /usr/share/shorewall-lite/init | sed 's/^.*> //')
-else
-    FIREWALL=/etc/init.d/shorewall-lite
-fi
+remove_file ${SBINDIR}/$PRODUCT

-if [ -n "$FIREWALL" ]; then
-    if [ -x /sbin/insserv -o -x /usr/sbin/insserv ]; then
-        insserv -r $FIREWALL
-    elif [ -x /sbin/chkconfig -o -x /usr/sbin/chkconfig ]; then
-	chkconfig --del $(basename $FIREWALL)
+if [ -L ${SHAREDIR}/$PRODUCT/init ]; then
+    if [ $HOST = openwrt ]; then
+	if [ $configure -eq 1 ] && /etc/init.d/$PRODUCT enabled; then
+	    /etc/init.d/$PRODUCT disable
+	fi
+	
+	FIREWALL=$(readlink ${SHAREDIR}/$PRODUCT/init)
    else
-	rm -f /etc/rc*.d/*$(basename $FIREWALL)
+	FIREWALL=$(readlink -m -q ${SHAREDIR}/$PRODUCT/init)
+    fi
+elif [ -n "$INITFILE" ]; then
+    FIREWALL=${INITDIR}/${INITFILE}
+fi
+
+if [ -f "$FIREWALL" ]; then
+    if [ $configure -eq 1 ]; then
+	if mywhich insserv ; then
+            insserv -r $FIREWALL
+	elif mywhich update-rc.d ; then
+	    update-rc.d ${PRODUCT} remove
+	elif mywhich chkconfig ; then
+	    chkconfig --del $(basename $FIREWALL)
+	fi
    fi

    remove_file $FIREWALL
-    rm -f ${FIREWALL}-*.bkout
 fi

-rm -f /sbin/shorewall-lite
-rm -f /sbin/shorewall-lite-*.bkout
+[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"

-rm -rf /etc/shorewall-lite
-rm -rf /etc/shorewall-lite-*.bkout
-rm -rf /var/lib/shorewall-lite
-rm -rf /var/lib/shorewall-lite-*.bkout
-rm -rf /usr/share/shorewall-lite
-rm -rf /usr/share/shorewall-lite-*.bkout
+if [ -n "$SERVICEDIR" ]; then
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
+    remove_file $SERVICEDIR/${PRODUCT}.service
+fi

-echo "Shorewall Uninstalled"
+remove_directory ${CONFDIR}/$PRODUCT
+remove_directory ${VARDIR}
+remove_directory ${SHAREDIR}/$PRODUCT
+remove_directory ${LIBEXECDIR}/$PRODUCT
+remove_file  ${CONFDIR}/logrotate.d/$PRODUCT

+if [ -n "$SYSCONFDIR" ]; then
+    [ -n "$SYSCONFFILE" ] && remove_file ${SYSCONFDIR}/${PRODUCT}
+fi

+if [ -n "${MANDIR}" ]; then
+    remove_file_with_wildcard ${MANDIR}/man5/${PRODUCT}\*
+    remove_file_with_wildcard ${MANDIR}/man8/${PRODUCT}\*
+fi
+
+#
+# Report Success
+#
+echo "$Product $VERSION Uninstalled"
--- a/Shorewall/Actions/action.A_AllowICMPs.deprecated
+++ b/Shorewall/Actions/action.A_AllowICMPs.deprecated
@@ -0,0 +1,9 @@
+#
+# Shorewall6 -- /usr/share/shorewall/action.A_AllowICMPs
+#
+# This action A_ACCEPTs needed ICMP types
+#
+###############################################################################
+#ACTION		SOURCE		DEST	PROTO		DPORT
+
+AllowICMPs(A_ACCEPT)
--- a/Shorewall/Actions/action.A_Drop.deprecated
+++ b/Shorewall/Actions/action.A_Drop.deprecated
@@ -0,0 +1,57 @@
+#
+# Shorewall -- /usr/share/shorewall/action.A_Drop
+#
+# The audited default DROP common rules
+#
+# This action is invoked before a DROP policy is enforced. The purpose
+# of the action is:
+#
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
+#
+# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
+#
+?require AUDIT_TARGET
+?warning "You are using the deprecated A_Drop default action. Please see http://www.shorewall.net/Actions.html
+###############################################################################
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
+#
+# Count packets that come through here
+#
+COUNT
+#
+# Special Handling for Auth
+#
+Auth(A_DROP)
+#
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before broadcast Drop.
+#
+A_AllowICMPs	-	-	icmp
+#
+# Don't log broadcasts and multicasts
+#
+dropBcast(audit)
+dropMcast(audit)
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log.
+#
+dropInvalid(audit)
+#
+# Drop Microsoft noise so that it doesn't clutter up the log.
+#
+SMB(A_DROP)
+A_DropUPnP
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+dropNotSyn(audit)	-	-	tcp
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+A_DropDNSrep
--- a/Shorewall/Actions/action.A_REJECT
+++ b/Shorewall/Actions/action.A_REJECT
@@ -0,0 +1,42 @@
+#
+# Shorewall -- /usr/share/shorewall/action.A_REJECTWITH
+#
+# A_REJECT Action.
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# A_REJECT[([<option>])] where <option> is a valid REJECT option.#
+###############################################################################
+?require AUDIT_TARGET
+
+DEFAULTS -
+
+AUDIT(reject)
+
+?if passed @1
+    ?if @1 =~ /tcp-reset$/
+        ?set reject_proto 6
+    ?else
+        ?set reject_proto ''
+    ?endif
+REJECT(@1)	-	-	$reject_proto
+?else
+REJECT
+?endif
--- a/Shorewall/Actions/action.A_REJECT!
+++ b/Shorewall/Actions/action.A_REJECT!
@@ -0,0 +1,31 @@
+#
+# Shorewall -- /usr/share/shorewall/action.A_REJECT!
+#
+# A_REJECT! Action.
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# A_REJECT[([<option>])] where <option> is a valid REJECT option.#
+###############################################################################
+?require AUDIT_TARGET
+
+DEFAULTS -
+
+A_REJECT(@1)
--- a/Shorewall/Actions/action.A_Reject.deprecated
+++ b/Shorewall/Actions/action.A_Reject.deprecated
@@ -0,0 +1,54 @@
+#
+# Shorewall -- /usr/share/shorewall/action.A_Reject
+#
+# The audited default REJECT action common rules
+#
+# This action is invoked before a REJECT policy is enforced. The purpose
+# of the action is:
+#
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
+#
+# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
+?require AUDIT_TARGET
+?warning "You are using the deprecated A_REJECT default action. Please see http://www.shorewall.net/Actions.html
+###############################################################################
+#ACTION		SOURCE	DEST	PROTO
+#
+# Count packets that come through here
+#
+COUNT
+#
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before broadcast Drop.
+#
+A_AllowICMPs	-	-	icmp
+#
+# Drop Broadcasts and multicasts so they don't clutter up the log
+# (these must *not* be rejected).
+#
+dropBcast(audit)
+dropMcast(audit)
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log (these ICMPs cannot be
+# rejected).
+#
+dropInvalid(audit)
+#
+# Reject Microsoft noise so that it doesn't clutter up the log.
+#
+SMB(A_REJECT)
+A_DropUPnP
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+dropNotSyn(audit)	-	-	tcp
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+A_DropDNSrep
--- a/Shorewall/Actions/action.AllowICMPs
+++ b/Shorewall/Actions/action.AllowICMPs
@@ -0,0 +1,45 @@
+#
+# Shorewall -- /usr/share/shorewall/action.AllowICMPs
+#
+# This action ACCEPTs needed ICMP types.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+DEFAULTS ACCEPT
+
+?if __IPV4
+    @1	-	-	icmp	fragmentation-needed	{comment="Needed ICMP types"}
+    @1	-	-	icmp	time-exceeded		{comment="Needed ICMP types"}
+?else
+?COMMENT Needed ICMP types (RFC4890)
+
+    @1	-		-	ipv6-icmp	destination-unreachable
+    @1	-		-	ipv6-icmp	packet-too-big
+    @1	-		-	ipv6-icmp	time-exceeded
+    @1	-		-	ipv6-icmp	parameter-problem
+
+# The following should have a ttl of 255 and must be allowed to transit a bridge
+    @1	-		-	ipv6-icmp	router-solicitation
+    @1	-		-	ipv6-icmp	router-advertisement
+    @1	-		-	ipv6-icmp	neighbour-solicitation
+    @1	-		-	ipv6-icmp	neighbour-advertisement
+    @1	-		-	ipv6-icmp	137	# Redirect
+    @1	-		-	ipv6-icmp	141	# Inverse neighbour discovery solicitation
+    @1	-		-	ipv6-icmp	142	# Inverse neighbour discovery advertisement
+
+# The following should have a link local source address and must be allowed to transit a bridge
+    @1	fe80::/10	-	ipv6-icmp	130	# Listener query
+    @1	fe80::/10	-	ipv6-icmp	131	# Listener report
+    @1	fe80::/10	-	ipv6-icmp	132	# Listener done
+    @1	fe80::/10	-	ipv6-icmp	143	# Listener report v2
+
+# The following should be received with a ttl of 255 and must be allowed to transit a bridge
+    @1	-		-	ipv6-icmp	148	# Certificate path solicitation
+    @1	-		-	ipv6-icmp	149	# Certificate path advertisement
+
+# The following should have a link local source address and a ttl of 1 and must be allowed to transit abridge
+    @1	fe80::/10	-	ipv6-icmp	151	# Multicast router advertisement
+    @1	fe80::/10	-	ipv6-icmp	152	# Multicast router solicitation
+    @1	fe80::/10	-	ipv6-icmp	153	# Multicast router termination
+?endif
--- a/Shorewall/Actions/action.AutoBL
+++ b/Shorewall/Actions/action.AutoBL
@@ -0,0 +1,70 @@
+#
+# Shorewall -- /usr/share/shorewall/action.AutoBL
+#
+# Auto Blacklist Action
+#
+# Parameters are:
+#
+# Event          - Name of the event to associate with this blacklist
+#                  Interval
+# Count          - Interval and number of Packets to trigger blacklisting
+#                  Default is 60 seconds and 5 packets.
+# Successive     - If a matching packet arrives within this many
+#                  seconds of the preceding one, it should be logged
+#                  and dealt with according to the Disposition and
+#                  Log Level parameters below. Default is 2 seconds.
+# Blacklist time - Number of seconds to blacklist
+#                  Default is 300 (5 minutes)
+# Disposition    - Disposition of blacklisted packets
+#                  Default is DROP
+# Log Level      - Level to Log Rejects
+#                  Default is info (6)
+#
+###############################################################################
+
+DEFAULTS -,60,5,2,300,DROP,info
+
+?begin perl
+
+use Shorewall::Config;
+
+my ( $event, $interval, $count, $successive, $bltime, $disposition, $level ) = get_action_params(7);
+
+fatal_error "The event name parameter to AutoBL is required"            unless supplied $event;
+fatal_error "Invalid interval ($interval) passed to AutoBL"             unless $interval =~ /^\d+$/ && $interval;
+fatal_error "Invalid successive interval ($succesive) passed to AutoBL" unless $successive =~ /^\d+$/;
+fatal_error "Invalid packet count ($count) passed to AutoBL"            unless $count =~ /^\d+$/ && $count;
+fatal_error "Invalid blacklist time ($bltime) passed to AutoBL"         unless $bltime =~ /^\d+$/ && $bltime;
+validate_level( $level );
+1;
+?end perl
+###############################################################################
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
+#
+# Silently reject the client if blacklisted
+#
+?if $REAP_OPTION
+?set check_param 'check:reap'
+?else
+?set check_param 'check'
+?endif
+IfEvent(${1}_BL,$6,$5,1,src,$check_param)
+#
+# Blacklist if M attempts in the last N seconds
+#
+IfEvent($1,AutoBLL($1,$6,$7),$2,$3,src,$check_param)
+#
+# Log and reject if the client has tried to connect
+# in the last N seconds
+#
+?if $4
+IfEvent($1,$6:$7,$4,1,-,update,Added)
+?endif
+#
+# Un-blacklist the client
+#
+ResetEvent(${1}_BL,LOG:$7,-,Removed)
+#
+# Set the event and accept the connection
+#
+SetEvent($1,ACCEPT,src)
--- a/Shorewall/Actions/action.AutoBLL
+++ b/Shorewall/Actions/action.AutoBLL
@@ -0,0 +1,23 @@
+#
+# Shorewall -- /usr/share/shorewall/action.AutoBLL
+#
+# Auto Blacklisting Logger Action
+#
+# Arguments are
+#
+# Event       - Name of the blacklisted event
+# Disposition - What to do with packets
+# Level       - Log level and optional tag for logging
+#
+###############################################################################
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
+#
+# Log the Reject
+#
+?if "$3" ne 'none'
+LOG:$3
+?endif
+#
+# And set the AutoBL Event for the SOURCE IP address
+#
+SetEvent(${1}_BL,$2,src)
--- a/Shorewall/Actions/action.BLACKLIST
+++ b/Shorewall/Actions/action.BLACKLIST
@@ -0,0 +1,50 @@
+#
+# Shorewall - /usr/share/shorewall/action.BLACKLIST
+#
+# This action:
+#
+#   - Adds the sender to the dynamic blacklist ipset
+#   - Optionally acts on the packet (default is DROP)
+#
+# Parameters:
+#
+# 1 - Action to take after adding the packet. Default is DROP.
+#     Pass -- if you don't want to take any action.
+# 2 - Timeout for ipset entry. Default is the timeout specified in
+#     DYNAMIC_BLACKLIST or the one specified when the ipset was created.
+#
+###############################################################################
+# Note -- This action is defined with the 'section' option, so the first
+#         parameter is always the section name. That means that in the
+#         following text, the first parameter passed in the rule is actually
+#         @2.
+###############################################################################
+?if $1 eq 'BLACKLIST'
+   ?if $BLACKLIST_LOG_LEVEL
+       blacklog
+   ?else
+       $BLACKLIST_DISPOSITION
+   ?endif
+?else
+   ?if ! "$SW_DBL_IPSET"
+   ?   error The BLACKLIST action may only be used with ipset-based dynamic blacklisting
+   ?endif
+
+   DEFAULTS -,DROP,-
+   #
+   # Add to the blacklist
+   #
+   ?if passed(@3)
+       ADD($SW_DBL_IPSET:src:@3)
+   ?elsif $SW_DBL_TIMEOUT
+       ADD($SW_DBL_IPSET:src:$SW_DBL_TIMEOUT)
+   ?else
+       ADD($SW_DBL_IPSET:src)
+   ?endif
+   #
+   # Dispose of the packet if asked
+   #
+   ?if passed(@2)
+      @2
+   ?endif
+?endif
--- a/Shorewall/Actions/action.Broadcast
+++ b/Shorewall/Actions/action.Broadcast
@@ -0,0 +1,65 @@
+#
+# Shorewall -- /usr/share/shorewall/action.Broadcast
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Broadcast[([<action>|[,{audit|-}])]
+#
+# Default action is DROP
+#
+###############################################################################
+
+DEFAULTS DROP,-
+
+?if __ADDRTYPE
+    @1	-	-	-	;; -m addrtype --dst-type BROADCAST
+    @1	-	-	-	;; -m addrtype --dst-type ANYCAST
+?else
+    ?begin perl;
+
+    use strict;
+    use Shorewall::IPAddrs;
+    use Shorewall::Config;
+    use Shorewall::Chains;
+
+    my ( $action, $audit ) = get_action_params( 2 );
+    my $chainref           = get_action_chain;
+    my ( $level, $tag )    = get_action_logging;
+
+    fatal_error "Invalid parameter to action Broadcast" if supplied $audit && $audit ne 'audit';
+
+    my $target             = require_audit ( $action , $audit );
+
+    if ( $family == F_IPV4 ) {
+        add_commands $chainref, 'for address in $ALL_BCASTS; do';
+    } elsif ($family == F_IPV6 ) {
+        add_commands $chainref, 'for address in $ALL_ACASTS; do';
+    }
+
+    incr_cmd_level $chainref;
+    log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
+    add_jump $chainref, $target, 0, "-d \$address ";
+    decr_cmd_level $chainref;
+    add_commands $chainref, 'done';
+
+    1;
+
+    ?end perl;
+?endif
--- a/Shorewall/Actions/action.DNSAmp
+++ b/Shorewall/Actions/action.DNSAmp
@@ -0,0 +1,34 @@
+#
+# Shorewall -- /usr/share/shorewall/action.DNSAmp
+#
+#  DNS Amplification Action
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# DNSAmp[([<action>])]
+#
+# Default action is DROP
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT
+
+DEFAULTS DROP
+
+@1	-	-	udp	53	;; -m u32 --u32 "0>>22&0x3C\@8&0xffff=0x0100 && 0>>22&0x3C\@12&0xffff0000=0x00010000"
--- a/Shorewall/Actions/action.Drop.deprecated
+++ b/Shorewall/Actions/action.Drop.deprecated
@@ -0,0 +1,84 @@
+#
+# Shorewall -- /usr/share/shorewall/action.Drop
+#
+# The former default DROP common rules. Use of this action is now deprecated
+#
+# This action is invoked before a DROP policy is enforced. The purpose
+# of the action is:
+#
+# a) Avoid logging lots of useless cruft.
+# b) Ensure that certain ICMP packets that are necessary for successful
+#    internet operation are always ACCEPTed.
+#
+# The action accepts six optional parameters:
+#
+# 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
+#     actions.
+# 2 - Action to take with Auth requests. Default is to do nothing special
+#     with them.
+# 3 - Action to take with SMB requests. Default is DROP or A_DROP,
+#     depending on the setting of the first parameter.
+# 4 - Action to take with required ICMP packets. Default is ACCEPT or
+#     A_ACCEPT depending on the first parameter.
+# 5 - Action to take with late DNS replies (UDP source port 53). Default
+#     is DROP or A_DROP depending on the first parameter.
+# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
+#     depending on the first parameter.
+#
+# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
+#
+###############################################################################
+?warning "You are using the deprecated Drop default action. Please see http://www.shorewall.net/Actions.html#Default"
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+DEFAULTS -,-,A_DROP,A_ACCEPT,A_DROP,A_DROP
+    ?else
+        ?error The first parameter to Drop must be 'audit' or '-'
+    ?endif
+?else
+DEFAULTS -,-,DROP,ACCEPT,DROP,DROP
+?endif
+
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
+#
+# Count packets that come through here
+#
+COUNT
+#
+# Special Handling for Auth
+#
+?if passed(@2)
+Auth(@2)
+?endif
+#
+# ACCEPT critical ICMP types
+#
+# For IPv6 connectivity ipv6-icmp broadcasting is required so
+# AllowICMPs must be before silent broadcast Drop.
+#
+AllowICMPs(@4)	-	-	icmp
+#
+# Don't log broadcasts or multicasts
+#
+Broadcast(DROP,@1)
+Multicast(DROP,@1)
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log.
+#
+Invalid(DROP,@1)
+#
+# Drop Microsoft noise so that it doesn't clutter up the log.
+#
+SMB(@3)
+DropUPnP(@6)
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+NotSyn(DROP,@1)	-	-	tcp
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+DropDNSrep(@5)
--- a/Shorewall/Actions/action.DropDNSrep
+++ b/Shorewall/Actions/action.DropDNSrep
@@ -0,0 +1,10 @@
+#
+# Shorewall -- /usr/share/shorewall/action.DropDNSrep
+#
+# This macro silently drops DNS UDP replies that are in the New state
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+DEFAULTS DROP
+@1	-	-	udp	-	53 { comment="Late DNS Replies" }
--- a/Shorewall/Actions/action.DropSmurfs
+++ b/Shorewall/Actions/action.DropSmurfs
@@ -0,0 +1,81 @@
+#
+# Shorewall -- /usr/share/shorewall/action.DropSmurfs
+#
+# Drop Smurfs Action
+#
+# Accepts a single optional parameter:
+#
+# -     = Do not Audit
+# audit = Audit dropped packets.
+#
+###############################################################################
+
+DEFAULTS -
+
+?begin perl;
+use strict;
+use Shorewall::Config qw(:DEFAULT F_IPV4 F_IPV6);
+use Shorewall::IPAddrs qw( IPv6_MULTICAST );
+use Shorewall::Chains;
+use Shorewall::Rules;
+
+my ( $audit ) = get_action_params( 1 );
+
+my $chainref        = get_action_chain;
+
+my ( $level, $tag ) = get_action_logging;
+my $target;
+
+if ( $level ne '-' || $audit ne '-' ) {
+    my $logchainref = ensure_filter_chain newlogchain( $chainref->{table} ), 0;
+
+    log_rule_limit( $level,
+		    $logchainref,
+		    $chainref->{name},
+		    'DROP',
+		    '',
+		    $tag,
+		    'add',
+		    '' );
+
+    if ( supplied $audit ) {
+	fatal_error "Invalid argument ($audit) to DropSmurfs" if $audit ne 'audit';
+	require_capability 'AUDIT_TARGET', q(Passing 'audit' to the DropSmurfs action), 's';
+	add_ijump( $logchainref, j => 'AUDIT --type DROP' );
+    }
+
+    add_ijump( $logchainref, j => 'DROP' );
+
+    $target = $logchainref;
+} else {
+    $target = 'DROP';
+}
+
+if ( have_capability( 'ADDRTYPE' ) ) {
+    if ( $family == F_IPV4 ) {
+	add_ijump $chainref , j => 'RETURN', s => '0.0.0.0';         ;
+    } else {
+	add_ijump $chainref , j => 'RETURN', s => '::';
+    }
+
+    add_ijump( $chainref, g => $target, addrtype => '--src-type BROADCAST' ) ;
+} else {
+    if ( $family == F_IPV4 ) {
+	add_commands $chainref, 'for address in $ALL_BCASTS; do';
+    } else {
+	add_commands $chainref, 'for address in $ALL_ACASTS; do';
+    }
+
+    incr_cmd_level $chainref;
+    add_ijump( $chainref, g => $target, s => '$address' );
+    decr_cmd_level $chainref;
+    add_commands $chainref, 'done';
+}
+
+if ( $family == F_IPV4 ) {
+    add_ijump( $chainref, g => $target, s => '224.0.0.0/4' );
+} else {
+    add_ijump( $chainref, g => $target, s => IPv6_MULTICAST );
+}
+
+?end perl;
--- a/Shorewall/Actions/action.Established
+++ b/Shorewall/Actions/action.Established
@@ -0,0 +1,35 @@
+#
+# Shorewall -- /usr/share/shorewall/action.Established
+#
+# Established Action
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Established[([<action>])]
+#
+# Default action is ACCEPT
+#
+###############################################################################
+
+DEFAULTS ACCEPT
+
+#
+# All logic for this action is supplied by the 'state' option in actions.std
+#
--- a/Shorewall/Actions/action.FIN
+++ b/Shorewall/Actions/action.FIN
@@ -0,0 +1,33 @@
+#
+# Shorewall -- /usr/share/shorewall/action.FIN
+#
+# FIN Action
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# FIN[([<action>])]
+#
+# Default action is ACCEPT
+#
+###############################################################################
+
+DEFAULTS ACCEPT,-
+
+@1	 -	-	;;+ -p 6 --tcp-flags ACK,FIN,PSH ACK,FIN,PSH
--- a/Shorewall/Actions/action.GlusterFS
+++ b/Shorewall/Actions/action.GlusterFS
@@ -0,0 +1,34 @@
+#
+# Shorewall -- /usr/share/shorewall/action.GlusterFS
+#
+# GlusterFS Handler for GlusterFS 3.4 and Later
+#
+# Parameters:
+#
+# Bricks - Number of bricks
+# IB     - 0 or 1, indicating whether Infiniband is used or not
+#
+###############################################################################
+
+DEFAULTS 2,0
+
+?if @1 !~ /^\d+/ || ! @1 || @1 > 1024
+    ?error Invalid value (@1) for the GlusterFS Bricks argument
+?elsif @2 !~ /^[01]$/
+    ?error Invalid value (@2) for the GlusterFS IB argument
+?endif
+
+#ACTION		SOURCE		DEST		PROTO	DPORT
+
+ACCEPT		-		-		udp	111,2049
+ACCEPT		-		-		tcp	38465:38467
+
+?if @{2}
+ACCEPT		-		-		tcp	24007:24008
+?else
+ACCEPT		-		-		tcp	24007
+?endif
+
+?set last_port 49150 + @{1}
+
+ACCEPT		-		-		tcp	49151:$last_port
--- a/Shorewall/Actions/action.IfEvent
+++ b/Shorewall/Actions/action.IfEvent
@@ -0,0 +1,147 @@
+#
+# Shorewall -- /usr/share/shorewall/action.IfEvent
+#
+# Perform an Action based on a Event
+#
+# Parameters:
+#
+# Event        - Must start with a letter and be composed of letters, digits,
+#                '-', and '_'.
+# Action       - Anything that can appear in the ACTION column of a rule.
+# Duration     - Duration in seconds over which the event is to be tested.
+# Hit Count    - Number of packets seen within the duration -- default is 1
+# Src or Dest  - 'src' (default) or 'dst'. Determines if the event is
+#                associated with the source address (src) or destination
+#                address (dst)
+# Command      - 'check' (default) 'reset', or 'update'. If 'reset',
+#                the event will be reset before the Action is taken.
+#                If 'update', the timestamp associated with the event will
+#                be updated and the action taken if the time limit/hitcount
+#                are matched.
+#                If '-', the action will be taken if the limit/hitcount are
+#                matched but the event's timestamp will not be updated.
+#
+#                If a duration is specified, then 'checkreap' and 'updatereap'
+#                may also be used. These are like 'check' and 'update'
+#                respectively, but they also remove any event entries for
+#                the IP address that are older than <duration> seconds.
+# Disposition  - Disposition for any event generated.
+#
+# For additional information, see http://www.shorewall.net/Events.html
+#
+###############################################################################
+#                                         DO NOT REMOVE THE FOLLOWING LINE
+###############################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT
+
+DEFAULTS -,ACCEPT,-,1,src,check,-
+
+?begin perl
+
+use Shorewall::Config qw(:DEFAULT :internal);
+use Shorewall::Chains;
+use Shorewall::Rules;
+use strict;
+
+my ( $event, $action, $duration, $hitcount, $destination, $command, $disposition ) = get_action_params( 7 );
+
+fatal_error "An event name is required"           unless supplied $event;
+fatal_error "Invalid event name ($event)"         unless $event =~ /^[a-zA-z][-\w]*$/;
+
+if ( supplied $duration ) {
+    fatal_error "Invalid time limit ($duration)"  unless $duration =~ /^\d+$/;
+    $duration = "--seconds $duration ";
+} else {
+    $duration = '';
+}
+
+fatal_error "Invalid hit count ($hitcount)"       unless $hitcount =~ /^\d+$/;
+fatal_error "Invalid Src or Dest ($destination)"  unless $destination =~ /^(?:src|dst)$/;
+
+my $srcdst = $destination eq 'src'? '--rsource' : '--rdest';
+
+our $commands_defined;
+
+#
+# Can't 'use constant' here
+#
+my ( $UPDATE_CMD, $CHECK_CMD, $RESET_CMD, $REAP_OPT, $TTL_OPT ) = ( 1, 2, 4, 8, 16 );
+
+my %command = ( check =>  $CHECK_CMD,
+		update => $UPDATE_CMD,
+		reset  => $RESET_CMD
+	      );
+
+my %commandopts = ( 
+		    reap   => $REAP_OPT,
+		    ttl    => $TTL_OPT
+		  );
+
+my @command = split(':', $command);
+
+$command = $command{shift @command} || 0;
+
+fatal_error "Command must be 'check', 'update' or 'reset" unless $command & ( $CHECK_CMD | $UPDATE_CMD | $RESET_CMD); 
+
+for ( @command ) {
+    fatal_error "Invalid command option ($_)" unless $commandopts{$_};
+    if ( $command & $commandopts{$_} ) {
+	warning_message "Duplicate command ($_)";
+    } else {
+	$command |= $commandopts{$_};
+    }
+}
+
+my $duplicate;
+
+set_action_disposition( $disposition) if supplied $disposition;
+set_action_name_to_caller;
+
+require_capability 'RECENT_MATCH', 'Use of events', 's';
+
+if ( $command & $REAP_OPT ) {
+    require_capability( 'REAP_OPTION', q(The 'reap' option), 's' );
+    fatal_error "${command}reap requires a time limit" unless $duration;
+    $duration .= '--reap ';
+}
+
+$duration .= '--rttl ' if $command & $TTL_OPT;
+
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "-m recent --rcheck ${duration}--hitcount $hitcount" );
+    $action = 'ACCEPT';
+}
+
+if ( $command & $RESET_CMD ) {
+    require_capability 'MARK_ANYWHERE', '"reset"', 's';
+
+    print "Resetting....\n";
+    
+    my $mark = $globals{EVENT_MARK};
+    #
+    # The event mark bit must be within 32 bits
+    #
+    fatal_error "The mark layout does not permit resetting of events" unless $mark & 0xffffffff;
+    #
+    # Reset the event mark bit
+    #
+    perl_action_helper( 'INLINE', '-j MARK --and-mark '. in_hex( (~ $mark ) & 0xffffffff ) );
+
+    $mark = in_hex $mark;
+    #
+    # Mark the packet if event is armed
+    #
+    perl_action_helper( 'INLINE', "-m recent --rcheck ${duration}--hitcount $hitcount --name $event $srcdst -j MARK --or-mark $mark" );
+    #
+    # if the event is armed, remove it and perform the action
+    #
+    perl_action_helper( $action , "-m mark --mark $mark/$mark -m recent --remove --name $event" );
+} elsif ( $command & $UPDATE_CMD ) {
+    perl_action_helper( $action, "-m recent --update ${duration}--hitcount $hitcount --name $event $srcdst" );
+} else {
+    perl_action_helper( $action, "-m recent --rcheck ${duration}--hitcount $hitcount --name $event $srcdst" );
+}
+
+1;
+
+?end perl
--- a/Shorewall/Actions/action.Invalid
+++ b/Shorewall/Actions/action.Invalid
@@ -0,0 +1,35 @@
+#
+# Shorewall -- /usr/share/shorewall/action.Invalid
+#
+# Invalid Action
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Invalid[([<action>])]
+#
+# Default action is DROP
+#
+###############################################################################
+
+DEFAULTS DROP,-
+
+#
+# All logic for this action is triggered by the 'audit' and 'state' options
+# in actions.std
+#
--- a/Shorewall/Actions/action.Limit
+++ b/Shorewall/Actions/action.Limit
@@ -0,0 +1,70 @@
+#
+# Shorewall -- /usr/share/shorewall/action.Limit
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Limit(<recent-set>,<num-connections>,<timeout>)
+#
+###############################################################################
+
+DEFAULTS -,-,-
+
+?begin perl
+
+use strict;
+use Shorewall::Config;
+use Shorewall::Chains;
+
+my $chainref        = get_action_chain;
+my @param           = get_action_params(3);
+my ( $level, $tag ) = get_action_logging;
+
+@param = split( ',', $tag ), $tag = $param[0] unless supplied( join '', @param );
+
+fatal_error 'Limit rules must include <set name>,<max connections>,<interval> as the log tag or as parameters' unless @param == 3;
+
+my $set   = $param[0];
+
+for ( @param[1,2] ) {
+    fatal_error 'Max connections and interval in Limit rules must be numeric (' . join( ':', 'Limit', $level eq '' ? 'none' : $level, $tag ) . ')' unless /^\d+$/
+}
+
+my $count = $param[1] + 1;
+
+require_capability( 'RECENT_MATCH' , 'Limit rules' , '' );
+
+warning_message "The Limit action is deprecated in favor of per-IP rate limiting using the RATE LIMIT column";
+
+add_irule $chainref, recent => "--name $set --set";
+
+if ( $level ne '' ) {
+    my $xchainref = new_chain 'filter' , "$chainref->{name}%";
+    log_irule_limit( $level, $xchainref, '', 'DROP', [], $tag, 'add' , '' );
+    add_ijump $xchainref, j => 'DROP';
+    add_ijump $chainref,  j => $xchainref, recent => "--name $set --update --seconds $param[2] --hitcount $count";
+} else {
+    add_ijump $chainref, j => 'DROP', recent => "--update --name $set --seconds $param[2] --hitcount $count";
+}
+
+add_ijump $chainref, j => 'ACCEPT';
+
+1;
+
+?end perl
--- a/Show More
+++ b/Show More
				`@@ -1 +0,0 @@`
				`This is the Shorewall-lite development 4.3 branch of SVN.`