Update README.md

Fix typo
Rename to install-vscode.ps1
2025-07-04 14:40:05 +02:00 · 2021-08-30 16:16:06 +02:00 · 2021-08-30 16:14:39 +02:00 · 2021-08-30 16:12:59 +02:00 · 2021-08-30 16:12:11 +02:00 · 2021-08-30 15:51:59 +02:00
552 changed files with 32506 additions and 2031 deletions
--- a/Data/Abbr/.computer.csv.swp
+++ b/Data/Abbr/.computer.csv.swp
--- a/Data/Abbr/aviation.csv
+++ b/Data/Abbr/aviation.csv
@ -1,7 +1,8 @@
-Abbr,Description
+Abbreviation,Definition
 AB,Air Base
 AC,Aircraft
 ACAS,Airborne Collision Avoidance System
+ACC,Area Control Centre
 AF,Air Field
 AFM,Aircraft Flight Manual
 AIP,Aeronautical Information Publication
@ -14,18 +15,36 @@ AFM,Airplane Flight Manual
 AGL,Above Ground Level
 AIP,Aeronautical Information Publication
 ANSP,Air Navigation Service Provider
+ARTCC,Air Route Traffic Control Centre
+ASB,Airspace Block
 ATA,Actual Time of Arrival
+ATC,Air Traffic Control
 ATIS,Automatic Terminal Information Service
 ATO,Air Traffic Organization
 BAF,Belgian Air Force
 CAAC,Civil Aviation Administration of China
 CAAS,Civil Aviation Authorization of Singapore
-CANSO,Civil Air Navigation Services Organization (founded 1996, located in Amsterdam)
+CANSO,Civil Air Navigation Services Organization
 CAS,Calibrated Airspeed
-CAT,Category of aircraft
+CAT,Category of Aircraft
 CAVOK,Ceiling And Visibility OK
 COG,Center of Gravity
 CRDA,Converging Runway Display Aid
 CTA,Controlled Time of Arrival
+CTA,Controlled Area
 CTOT,Calculated Take-Off Time
+CTR,Control Zone or Controlled Traffic Region
+ECAC,European Civil Aviation Conference
+FIA,Flight Information Area
+FIR,Flight Information Region
+FL,Flight Level
 IAS,Indicated Air Speed
+LL,Lower Limit
+LTA,Lower Traffic Area
+MEA,Minimum En-route Altitude
+OCTA,Outside Control Areas
+TA,Terminal Airspace
+TAS,Terminal Airspace System
+TMA,Terminal Control Area
+UTA,Upper Traffic Area
+VTC,Visual Terminal Chart
--- a/Data/Abbr/computer.csv
+++ b/Data/Abbr/computer.csv
@ -0,0 +1,46 @@
+Abbreviation,Definition
+ACID,"Atomicity, Consistency, Isolation, Durability"
+ACL,Access Control List
+ADC,Analog-to-Digital Converter
+ADF,Automatic Document Feeder
+ADSL,Asymmetric Digital Subscriber Line
+AFP,Apple Filing Protocol
+AGP,Accelerated Graphics Port
+AIFF,Audio Interchange File Format
+ALU,Arithmetic Logic Unit
+ANSI,American National Standards Institute
+API,Application Programming Interface
+APU,Accelerated Processing Unit
+ARP,Address Resolution Protocol
+ASCII,American Standard Code for Information Interchange
+ASP,Application Service Provider
+ATM,Asynchronous Transfer Mode
+AVR,Audio/Video Receiver
+Bash,Bourne-Again Shell
+BASIC,Beginner's All-purpose Symbolic Instruction Code
+BCC,Blind Carbon Copy
+BIOS,Basic Input/Output System
+BLE,Bluetooth Low Energy
+Blob,Binary Large Object
+BMP,Bitmap
+BSOD,Blue Screen of Death
+CAD,Computer-Aided Design
+CAN,Campus Area Network
+CD,Compact Disc
+CPU,Central Processing Unit
+CSV,Comma Separated Values (file format)
+DDL,Data Definition Language
+IDE,Integrated Development Environment
+GPU,Graphics Processing Unit
+GUI,Graphical User Interface
+IP,Internet Protocol
+ISP,Internet Service Provider
+IT,Information Technology
+LAN,Local Area Network
+LCD,Liquid Crystal Display
+NIC,Network Interface Card
+PC,Personal Computer
+RAM,Random Access Memory
+URL,Uniform Resource Locator
+VPN,Virtual Private Network
+WAN,Wide Area Network
--- a/Data/Abbr/cooking.csv
+++ b/Data/Abbr/cooking.csv
@ -0,0 +1,42 @@
+Abbreviation,Definition
+btl,Bottle
+c,Cup
+C,Cups
+DF,Dairy free
+doz,dozen
+dp,drop
+fl oz,Fluid ounce
+fl ozs,Fluid ounces
+g,Grams
+gal,Gallons
+gals,Gallons
+GF,Gluten free
+kg,Kilograms
+L,Litres
+l,Litres
+lb,Pound
+lbs,Pounds
+lg,large
+lge,large
+md,medium
+med,medium
+mg,Milligrams
+ml,Millilitres
+NRV,Nutrient Reference Value
+oz,Ounce
+ozs,Ounces
+pers,person(s)
+pn,Pinch
+pt,Pint
+pts,Pints
+qt,Quart
+qts,Quarts
+RI,Reference Intake
+serv,serving
+sm,small
+srv,serving
+Tbsp,Tablespoon
+tsp,Teaspoon
+VG,vegetarian
+VN,Vegan
+WF,Wheat free
--- a/Data/Abbr/medicine.csv
+++ b/Data/Abbr/medicine.csv
@ -0,0 +1,14 @@
+Abbreviation,Definition
+PR,per the rectum
+pr,per the rectum
+PT,prothrombin time
+PTT,partial thromboplastin time
+pulv,powder
+PV,per the vagina
+q,every
+q12h,every 12 hours
+qd,daily
+q1d,daily
+q2h,every 2 hours
+q3h,every 3 hours
+q4h,every 4 hours
--- a/Data/Abbr/music.csv
+++ b/Data/Abbr/music.csv
@ -0,0 +1,81 @@
+Abbreviation,Definition
+8va,Octave up
+ad lib,Ad Libitum (“freely”)
+afl,Alto flute
+AS,Al Segno (“To the sign”)
+bc,Basso Continuo (“continuous bass accompaniment”)
+bcl,Bass clarinet
+bfl,Bass flute
+bpm,Beats per minute
+bn,Bassoon
+bob,Bass oboe
+br,Brass instruments
+bstcl,Basset clarinet
+bsthn,Basset horn
+bug,Bugle
+cbcl,Contrabass clarinet
+cbn,Contrabassoon
+cf,Cantus Firmus (“main melody”)
+cl,Clarinet
+cresc,Crescendo (also noted as <)
+crt,Cornet
+D.C. al Coda,Da Capo al Coda (“from the beginning to the Coda sign”)
+D.C. al Fine,Da Capo al Fine (“from the beginning to the end”)
+D.S. al Fine,Dal Segno al Fine (“from the Segno mark to the end”)
+decresc,Descrescendo (also noted as >)
+dim,Diminuendo
+eh,English horn
+euph,Euphonium
+f,Forte
+fda,Flute d’amore (tenor flute)
+ff,Fortissimo
+fff,Fortississimo
+fgh,Flugelhorn
+fl,Flute
+fp,Fortepiano
+gliss,Glissando (“gliding, sliding”)
+hn,Horn
+m,Measure
+mm,Measures
+MM,Metronome tempo
+mf,Mezzo-Forte
+mp,Mezzo-Piano
+mvt,Movement
+ob,Oboe
+oda,Oboe d’amore
+orch,Orchestra
+p,Piano
+p,Page,
+pan,Pan flute
+pic,Piccolo
+picc,Piccolo
+pizz,Pizzicato (“plucking”)
+pp,Pianissio
+pp,Pages
+ppp,Pianississimo
+rall,Rallentando (“gradual slowing”)
+rec,Recorder
+rit,Ritardando (“slowing down”)
+Rf,Rinforzando (“with sudden force”)
+Rfz,Rinforzando (“with sudden force”)
+rpm,Revolutions per minute
+sax,Saxophone
+sf,Sforzando, Sforzato (“sudden accent”)
+sfz,Sforzando, Sforzato (“sudden accent”)
+sfp,Sforzando followed by Piano
+smorz,Smorzando (“dying away”)
+sord,Sordino (“muted”)
+sost. ped,Sostenuto pedal (“sustained pedal”)
+spicc,Spiccato (“bounce bow on a stringed instrument”)
+stacc,Staccato (“playing each note separately from the others”)
+stpt,Slide trumpet
+sul pont,Sul Ponticello (“playing with the bow near the bridge”)
+tba,Tuba
+tbn,Trombone
+tpt,Trumpet
+tr,Trill
+trem,Tremolo (“trembling, wavering”)
+tsx,Tenor saxophone
+vib,Vibrato (“pulsing, vibrating”)
+vol,Volume
+ww,Woodwinds
--- a/Data/Abbr/various.csv
+++ b/Data/Abbr/various.csv
@ -1,4 +1,4 @@
-Abbr,Description
+Abbreviation,Definition
 0D,obvious deed
 1AM,Air Mechanic 1st Class
 1D,One-Dimensional
@ -104,7 +104,6 @@ ACE- Air Combat Emulator (computer game),Allied Command Europe,Armored Combat Ea
 ACES- Aerolíneas Centrales de Colombia (Spanish, "Central Colombian Airlines"),Auxiliary Campus Enterprises and Services of Alfred State College
 ACF- Administration for Children and Families,American Car and Foundry,American Culinary Federation
 ACHT, Average Call Hold Time
-ACID, Atomicity, Consistency, Isolation, and Durability (in databases)
 ACINT, Acoustic Intelligence
 ACK, Acknowledge (telecommunications; cf. NAK)
 ACL- Access Control List,Anterior cruciate ligament; the initialism can also refer to an injury to this ligament.,Atlantic Coast Line Railroad
@ -961,7 +960,7 @@ CPR, Cardiopulmonary resuscitation
 CPSM, Continuous Phase Shift Modulation
 CPSU, Communist Party of the Soviet Union
 CPT, Contingency Planning Team
-CPU, Central Processing Unit,Contract Postal Unit
+CPU,Contract Postal Unit
 CPV, Cape Verde (ISO 3166 trigram)
 CPX, Command Post eXercise
 CQ, Carrier Qualification,Central Queensland,Charge of Quarters,Congressional Quarterly,Constellation Airlines (IATA airline designator),Northern Mariana Islands (FIPS 10-4 territory code)
@ -4560,7 +4559,8 @@ RAE, UK Royal Aircraft Establishment (-1991)
 RAF, Red Army Faction,Royal Air Force
 RAG, Raising and Giving,Rocket Antitank Grenade
 RAGBRAI, Register's Annual Great Bicycle Ride Across Iowa
-RAM, Random Access Memory,Rolling Airframe Missile,Royal Air Maroc
+RAM,Rolling Airframe Missile,
+RAM,Royal Air Maroc
 Ramark, RAdar MARKer
 RAOC, Rear Area Operation Centre
 RAP,(a/i) Radio Access Point,Radiological Assistance Program (U.S. Department of Energy),Rear Area Protection,Recognised [Operating/Operational] Air Picture,Recurring Advance Payment,Relational Associative Processor,Reliable Acoustic Path,Rocket-Assisted Projectile,Rule Against Perpetuities
--- a/Data/Add_ps1_to_New_context_menu.reg
+++ b/Data/Add_ps1_to_New_context_menu.reg
--- a/Data/Checklists/handwashing.txt
+++ b/Data/Checklists/handwashing.txt
@ -0,0 +1,6 @@
+HEAD Handwashing
+Wet your hands with clean, running water (warm or cold), turn off the tap, and apply soap.
+Lather your hands by rubbing them together with the soap. Lather the backs of your hands, between your fingers, and under your nails.
+Scrub your hands for at least 20 seconds.
+Rinse your hands well under clean, running water.
+Dry your hands using a clean towel or air dry them.
--- a/Data/Help/WindowsTerminal.txt
+++ b/Data/Help/WindowsTerminal.txt
@ -0,0 +1,45 @@
+Windows Terminal Cheat Sheet
+============================
+
+Application
+-----------
+Alt-F4			Close window
+Ctrl-Shift-f		Find
+Ctrl-Shift-Space	Open dropdown
+Ctrl-,			Open settings file
+Alt-Enter		Toggle full screen
+F11
+
+Tab Commands
+------------
+Ctrl-Shift-d		Duplicate tab
+Ctrl-Shift-t		New tab
+Ctrl-Shift-p		New tab from profile p=1..9
+Ctrl-Tab		Switch to next tab
+Ctrl-Shift-Tab		Switch to previous tab
+Ctrl-Alt-n		Switch to tab n=0..9
+
+Pane Commands
+-------------
+Alt-Shift-d		Split pane optimally. Active profile.
+Alt-Shift--		Split pane horizontally. Default profile.
+Alt-Shift-+		Split pane vertically. Default profile.
+Ctrl-Shift-w		Close innermost pane, tab, or window
+
+Clipboard Commands
+------------------
+Ctrl-c			Copy
+Ctrl-v			Paste
+
+Scrollback Commands
+-------------------
+Ctrl-Shift-up		Scroll up
+Ctrl-Shift-down		Scroll down
+Ctrl-Shift-pgup		Scroll page up
+Ctrl-Shift-pgdn		Scroll page down
+
+Visual Adjustment Commands
+--------------------------
+Ctrl-=			Increase font size
+Ctrl--			Decrease font size
+Ctrl-0			Reset font size
--- a/Data/Remove_ps1_from_New_context_menu.reg
+++ b/Data/Remove_ps1_from_New_context_menu.reg
--- a/Data/TIOBE-index.csv
+++ b/Data/TIOBE-index.csv
@ -0,0 +1,21 @@
+Language, Popularity, Change
+C, 12.54, -4.65
+Python, 11.84, +3.48
+Java, 11.54, -4.56
+C++, 7.36, +1.41
+C#, 4.33, -0.40
+Visual Basic, 4.01, -0.68
+JavaScript, 2.33, +0.06
+PHP, 2.21, -0.05
+Assembly language, 2.05, +1.09
+SQL, 1.88, +0.15
+Classic Visual Basic, 1.72, +1.07
+Groovy, 1.29, +0.87
+Ruby, 1.23, +0.25
+R, 1.20, -0.99
+Perl, 1.18, +0.36
+Swift, 1.10, -0.35
+Fortran, 1.07, +0.80
+Delphi/Object Pascal, 1.06, +0.47
+MATLAB, 1.05, +0.15
+Go, 0.95, -0.06
--- a/Data/default.kresd.conf
+++ b/Data/default.kresd.conf
@ -0,0 +1,29 @@
+-- SETTINGS FOR KNOT RESOLVER (adapt to your needs, please)
+
+-- LISTEN TO:
+net.listen({'127.0.0.1', '::1'},  53, { kind = 'dns' })
+net.listen({'127.0.0.1', '::1'}, 853, { kind = 'tls' })
+net.listen('192.168.178.71', 53, { kind = 'dns' })
+net.listen('192.168.178.71', 853, { kind = 'tls' })
+
+-- CACHE: 
+cache.size = 100 * MB   -- 100 MB cache size
+cache.min_ttl(3600)     -- 1 hour minimum time-to-live 
+cache.max_ttl(604800)   -- 1 week maximum time-to-live 
+
+-- FORWARD TO:
+policy.add(policy.all(
+   policy.FORWARD(
+      {'192.168.178.1', -- Fritz!Box
+       '1.1.1.1',       -- Cloudflare #1
+       '1.0.0.1'        -- Cloudflare #2
+   })
+))
+
+-- MODULES:
+modules = {
+        predict = {
+                window = 15, -- 15 minutes sampling window
+                period = 6*(60/15) -- track last 6 hours
+        }
+}
--- a/Data/exit-codes.csv
+++ b/Data/exit-codes.csv
--- a/Data/git-repos.csv
+++ b/Data/git-repos.csv
@ -0,0 +1,26 @@
+Category,FolderName,Branch,Shallow,URL
+Dev,	 base256unicode,master,  no,	"https://github.com/fleschutz/base256unicode"
+Dev,	 bazel,		master,	 yes,	"https://github.com/bazelbuild/bazel"
+Dev,	 cmake,		master,	 yes,	"https://github.com/Kitware/CMake"
+Fun,	 cmatrix,	master,	 yes,	"https://github.com/abishekvashok/cmatrix"
+Tool,	 cmark,		master,	 yes,	"https://github.com/commonmark/cmark"
+Dev,	 CWTS,		master,  no,	"https://github.com/fleschutz/CWTS"
+Tool,	 elasticsearch,	master,  yes,	"https://github.com/elastic/elasticsearch"
+Tool,	 go-ipfs,	master,	 yes,	"https://github.com/ipfs/go-ipfs"
+Tool,	 grafana,	main,	 yes,	"https://github.com/grafana/grafana"
+Tool,	 leon,          master,  yes,   "https://github.com/leon-ai/leon"
+Dev,	 llvm,		master,  yes,	"https://github.com/llvm/llvm-project"
+Math,	 LSS,		master,	 yes,	"https://github.com/fleschutz/LSS"
+Dev,	 ninja,		master,  yes,	"git://github.com/ninja-build/ninja.git"
+Libs,	 opencv,	master,  yes,	"https://github.com/opencv/opencv"
+Tool,	 OSMA,		master,  no,	"https://github.com/fleschutz/OSMA"
+Shell,	 PowerShell,	master,  no,	"https://github.com/fleschutz/PowerShell"
+Shell,	 pwsh,		master,  yes,	"https://github.com/PowerShell/PowerShell"
+Dev,	 protobuf,	master,	 yes,	"https://github.com/protocolbuffers/protobuf"
+Dev,	 rust,		master,  yes,	"https://github.com/rust-lang/rust"
+Tool,	 smartmontools,	master,  yes,	"https://github.com/smartmontools/smartmontools"
+Tool,	 tensorflow,	master,  yes,	"https://github.com/tensorflow/tensorflow"
+Tool,	 terminal,	main,    yes,	"https://github.com/microsoft/terminal"
+Dev,	 tinycc,	mob,     yes,	"https://github.com/TinyCC/tinycc"
+Tool,	 voice2json,	master,  yes,	"https://github.com/synesthesiam/voice2json"
+Tool,	 zfs,		master,  yes,	"https://github.com/openzfs/zfs"
--- a/Data/git-repositories.csv
+++ b/Data/git-repositories.csv
@ -1,15 +0,0 @@
-URL,Directory
-"https://github.com/abishekvashok/cmatrix", "cmatrix"
-"https://github.com/commonmark/cmark", "cmark"
-"https://github.com/elastic/elasticsearch", "elasticsearch"
-"https://github.com/fleschutz/CWTS", "CWTS"
-"https://github.com/fleschutz/PowerShell", "PowerShell"
-"https://github.com/fleschutz/LSS", "LSS"
-"https://github.com/fleschutz/base256unicode", "base256unicode"
-"https://github.com/grafana/grafana", "grafana"
-"https://github.com/llvm/llvm-project", "llvm"
-"https://github.com/smartmontools/smartmontools", "smartmontools"
-"https://github.com/synesthesiam/voice2json", "voice2json"
-"https://github.com/TinyCC/tinycc", "tinycc"
-"https://github.com/opencv/opencv", "opencv"
-"https://github.com/openzfs/zfs", "zfs"
--- a/Data/http-status-codes.csv
+++ b/Data/http-status-codes.csv
@ -0,0 +1,65 @@
+"StatusCode","Type","ShortDescription","LongDescription"
+"100","Informational","Continue ","The initial part of a request has been received and has not yet been rejected by the server. The server intends to send a final response after the request has been fully received and acted upon."
+"101","Informational","Switching Protocols ","The server understands and is willing to comply with the client's request, via the Upgrade header field1, for a change in the application protocol being used on this connection."
+"102","Informational","Processing ","An interim response used to inform the client that the server has accepted the complete request, but has not yet completed it."
+"200","Success","OK ","The request has succeeded."
+"201","Success","Created ","The request has been fulfilled and has resulted in one or more new resources being created."
+"202","Success","Accepted ","The request has been accepted for processing, but the processing has not been completed. The request might or might not eventually be acted upon, as it might be disallowed when processing actually takes place."
+"203","Success","Non-authoritative Information ","The request was successful but the enclosed payload has been modified from that of the origin server's 200 OK response by a transforming proxy1."
+"204","Success","No Content ","The server has successfully fulfilled the request and that there is no additional content to send in the response payload body."
+"205","Success","Reset Content ","The server has fulfilled the request and desires that the user agent reset the ""document view"", which caused the request to be sent, to its original state as received from the origin server."
+"206","Success","Partial Content ","The server is successfully fulfilling a range request for the target resource by transferring one or more parts of the selected representation that correspond to the satisfiable ranges found in the request's Range header field1."
+"207","Success","Multi-Status ","A Multi-Status response conveys information about multiple resources in situations where multiple status codes might be appropriate."
+"208","Success","Already Reported ","Used inside a DAV: propstat response element to avoid enumerating the internal members of multiple bindings to the same collection repeatedly."
+"226","Success","IM Used ","The server has fulfilled a GET request for the resource, and the response is a representation of the result of one or more instance-manipulations applied to the current instance."
+"300","Redirection","Multiple Choices ","The target resource has more than one representation, each with its own more specific identifier, and information about the alternatives is being provided so that the user (or user agent) can select a preferred representation by redirecting its request to one or more of those identifiers."
+"301","Redirection","Moved Permanently ","The target resource has been assigned a new permanent URI and any future references to this resource ought to use one of the enclosed URIs."
+"302","Redirection","Found ","The target resource resides temporarily under a different URI. Since the redirection might be altered on occasion, the client ought to continue to use the effective request URI for future requests."
+"303","Redirection","See Other ","The server is redirecting the user agent to a different resource, as indicated by a URI in the Location header field, which is intended to provide an indirect response to the original request."
+"304","Redirection","Not Modified ","A conditional GET or HEAD request has been received and would have resulted in a 200 OK response if it were not for the fact that the condition evaluated to false."
+"305","Redirection","Use Proxy ","Defined in a previous version of this specification and is now deprecated, due to security concerns regarding in-band configuration of a proxy."
+"307","Redirection","Temporary Redirect ","The target resource resides temporarily under a different URI and the user agent MUST NOT change the request method if it performs an automatic redirection to that URI."
+"308","Redirection","Permanent Redirect ","The target resource has been assigned a new permanent URI and any future references to this resource ought to use one of the enclosed URIs."
+"400","Client Error","Bad Request ","The server cannot or will not process the request due to something that is perceived to be a client error (e.g., malformed request syntax, invalid request message framing, or deceptive request routing)."
+"401","Client Error","Unauthorized ","The request has not been applied because it lacks valid authentication credentials for the target resource."
+"402","Client Error","Payment Required ","Reserved for future use."
+"403","Client Error","Forbidden ","The server understood the request but refuses to authorize it."
+"404","Client Error","Not Found ","The origin server did not find a current representation for the target resource or is not willing to disclose that one exists."
+"405","Client Error","Method Not Allowed ","The method received in the request-line is known by the origin server but not supported by the target resource."
+"406","Client Error","Not Acceptable ","The target resource does not have a current representation that would be acceptable to the user agent, according to the proactive negotiation header fields received in the request1, and the server is unwilling to supply a default representation."
+"407","Client Error","Proxy Authentication Required ","Similar to 401 Unauthorized, but it indicates that the client needs to authenticate itself in order to use a proxy."
+"408","Client Error","Request Timeout ","The server did not receive a complete request message within the time that it was prepared to wait."
+"409","Client Error","Conflict ","The request could not be completed due to a conflict with the current state of the target resource. This code is used in situations where the user might be able to resolve the conflict and resubmit the request."
+"410","Client Error","Gone ","The target resource is no longer available at the origin server and that this condition is likely to be permanent."
+"411","Client Error","Length Required ","The server refuses to accept the request without a defined Content-Length1."
+"412","Client Error","Precondition Failed ","One or more conditions given in the request header fields evaluated to false when tested on the server."
+"413","Client Error","Payload Too Large ","The server is refusing to process a request because the request payload is larger than the server is willing or able to process."
+"414","Client Error","Request-URI Too Long ","The server is refusing to service the request because the request-target1 is longer than the server is willing to interpret."
+"415","Client Error","Unsupported Media Type ","The origin server is refusing to service the request because the payload is in a format not supported by this method on the target resource."
+"416","Client Error","Requested Range Not Satisfiable ","None of the ranges in the request's Range header field1 overlap the current extent of the selected resource or that the set of ranges requested has been rejected due to invalid ranges or an excessive request of small or overlapping ranges."
+"417","Client Error","Expectation Failed ","The expectation given in the request's Expect header field1 could not be met by at least one of the inbound servers."
+"418","Client Error","I'm a teapot ","Any attempt to brew coffee with a teapot should result in the error code ""418 I'm a teapot"". The resulting entity body MAY be short and stout."
+"421","Client Error","Misdirected Request ","The request was directed at a server that is not able to produce a response. This can be sent by a server that is not configured to produce responses for the combination of scheme and authority that are included in the request URI."
+"422","Client Error","Unprocessable Entity ","The server understands the content type of the request entity (hence a 415 Unsupported Media Type status code is inappropriate), and the syntax of the request entity is correct (thus a 400 Bad Request status code is inappropriate) but was unable to process the contained instructions."
+"423","Client Error","Locked ","The source or destination resource of a method is locked."
+"424","Client Error","Failed Dependency ","The method could not be performed on the resource because the requested action depended on another action and that action failed."
+"426","Client Error","Upgrade Required ","The server refuses to perform the request using the current protocol but might be willing to do so after the client upgrades to a different protocol."
+"428","Client Error","Precondition Required ","The origin server requires the request to be conditional."
+"429","Client Error","Too Many Requests ","The user has sent too many requests in a given amount of time (""rate limiting"")."
+"431","Client Error","Request Header Fields Too Large ","The server is unwilling to process the request because its header fields are too large. The request MAY be resubmitted after reducing the size of the request header fields."
+"444","Client Error","Connection Closed Without Response ","A non-standard status code used to instruct nginx to close the connection without sending a response to the client, most commonly used to deny malicious or malformed requests."
+"451","Client Error","Unavailable For Legal Reasons ","The server is denying access to the resource as a consequence of a legal demand."
+"499","Client Error","Client Closed Request ","A non-standard status code introduced by nginx for the case when a client closes the connection while nginx is processing the request."
+"500","Server Error","Internal Server Error ","The server encountered an unexpected condition that prevented it from fulfilling the request."
+"501","Server Error","Not Implemented ","The server does not support the functionality required to fulfill the request."
+"502","Server Error","Bad Gateway ","The server, while acting as a gateway or proxy, received an invalid response from an inbound server it accessed while attempting to fulfill the request."
+"503","Server Error","Service Unavailable ","The server is currently unable to handle the request due to a temporary overload or scheduled maintenance, which will likely be alleviated after some delay."
+"504","Server Error","Gateway Timeout ","The server, while acting as a gateway or proxy, did not receive a timely response from an upstream server it needed to access in order to complete the request."
+"505","Server Error","HTTP Version Not Supported ","The server does not support, or refuses to support, the major version of HTTP that was used in the request message."
+"506","Server Error","Variant Also Negotiates ","The server has an internal configuration error: the chosen variant resource is configured to engage in transparent content negotiation itself, and is therefore not a proper end point in the negotiation process."
+"507","Server Error","Insufficient Storage ","The method could not be performed on the resource because the server is unable to store the representation needed to successfully complete the request."
+"508","Server Error","Loop Detected ","The server terminated an operation because it encountered an infinite loop while processing a request with ""Depth: infinity"". This status indicates that the entire operation failed."
+"510","Server Error","Not Extended ","The policy for accessing the resource has not been met in the request. The server should send back all the information necessary for the client to issue an extended request."
+"511","Server Error","Network Authentication Required ","The client needs to authenticate to gain network access."
+"599","Server Error","Network Connect Timeout Error ","This status code is not specified in any RFCs, but is used by some HTTP proxies to signal a network connect timeout behind the proxy to a client in front of the proxy."
+
--- a/Data/ports.csv
+++ b/Data/ports.csv
--- a/Data/quotes.csv
+++ b/Data/quotes.csv
@ -0,0 +1,32 @@
+Genre,Author,Quote
+IQ,Thomas Edison,"Genius is one percent inspiration and ninety-nine percent perspiration."
+Misc,Johann Wolfgang von Goethe,"Difficulties increase the nearer we get to the goal."
+Misc,William Shakespeare,"Having nothing, nothing can he lose."
+Misc,Albert Einstein,"Learn from yesterday, live for today, hope for tomorrow."
+Misc,Michelangelo,"Faith in oneself is the best and safest course."
+Misc,Sophocles,"It takes both sunshine and rain to make a rainbow."
+Misc,Mahatma Gandhi,"We must become the change we want to see."
+Misc,Johann Wolfgang von Goethe,"Knowing is not enough; we must apply!"
+Misc,Immanuel Kant,"Science is organized knowledge. Wisdom is organized life."
+Misc,Indira Gandhi,"You can't shake hands with a clenched fist."
+Misc,Albert Einstein,"Try not to become a man of success, but rather try to become a man of value."
+Misc,Pierre Auguste Renoir,"The pain passes, but the beauty remains."
+Misc,Heraclitus,"All is flux; nothing stays still."
+Misc,Japanese proverb,"The day you decide to do it is your lucky day."
+Misc,Abraham Lincoln,"The best thing about the future is that it only comes one day at a time."
+Misc,Epictetus,"We have two ears and one mouth so that we can listen twice as much as we speak."
+Misc,Cervantes,"Be slow of tongue and quick of eye."
+Misc,Bruce Lee,"Mistakes are always forgivable, if one has the courage to admit them."
+Misc,Nelson Mandela,"The greatest glory in living lies not in never falling, but in rising every time we fall."
+Misc,Walt Disney,"The way to get started is to quit talking and begin doing."
+Misc,John Lennon,"Life is what happens when you're busy making other plans"
+Misc,Mother Teresa,"Spread love everywhere you go. Let no one ever come to you without leaving happier."
+Misc,Benjamin Franklin,"Tell me and I forget. Teach me and I remember. Involve me and I learn."
+Misc,Aristotle,"It is during our darkest moments that we must focus to see the light."
+Misc,Anne Frank,"Whoever is happy will make others happy too."
+Misc,Helen Keller,"Life is either a daring adventure or nothing at all."
+Misc,Abraham Lincoln,"In the end, it's not the years in your life that count. It's the life in your years."
+Misc,Albert Einstein,"Only a life lived for others is a life worthwhile."
+Misc,Mae West,"You only live once, but if you do it right, once is enough."
+Misc,Jonathan Swift,"May you live all the days of your life."
+Misc,Hans Christian Andersen,"Life itself is the most wonderful fairy tale."
--- a/Data/scripts.csv
+++ b/Data/scripts.csv
@ -1,8 +1,6 @@
 Script,Description
 add-firewall-rules.ps1, adds firewall rules to the given executables (needs admin rights)
 add-memo.ps1, adds the given memo text to $HOME/Memos.csv
-build-repo.ps1, builds the current/given Git repository 
-build-repos.ps1, builds all Git repositories under the current/given directory
 cd-desktop.ps1, go to the user's desktop folder
 cd-docs.ps1, go to the user's documents folder
 cd-downloads.ps1, go to the user's downloads folder
@ -29,6 +27,7 @@ check-ipv4-address.ps1, checks the given IPv4 address for validity
 check-ipv6-address.ps1, checks the given IPv6 address for validity
 check-mac-address.ps1, checks the given MAC address for validity
 check-ping.ps1, checks the ping latency to the internet
+check-subnet-mask.ps1, checks the given subnet mask for validity
 check-swap-space.ps1, checks the swap space for free space left
 check-symlinks.ps1, checks every symlink in the given directory tree
 check-weather.ps1, checks the current weather for critical values
@ -36,6 +35,7 @@ check-windows-system-files.ps1, checks the validity of the Windows system files
 check-xml-file.ps1, checks the given XML file for validity
 cherry-picker.ps1, cherry-picks a Git commit into multiple branches
 clean-repo.ps1, cleans the current/given Git repository from untracked files (including submodules)
+clean-repos.ps1, cleans all Git repositories under the current/given directory from untracked files (including submodules)
 clear-recycle-bin.ps1, removes the content of the recycle bin folder (can not be undo!)
 clone-repos.ps1, clones well-known Git repositories
 close-calculator.ps1, closes the calculator program gracefully
@ -43,20 +43,22 @@ close-chrome.ps1, closes Google Chrome gracefully
 close-cortana.ps1, closes Cortana gracefully
 close-edge.ps1, closes Microsoft Edge gracefully
 close-file-explorer.ps1, closes Microsoft File Explorer gracefully
+close-firefox.ps1, closes the Firefox Web browser gracefully
 close-program.ps1, closes the given program gracefully
+close-netflix.ps1, closes Netflix gracefully
+close-onedrive.ps1, closes Microsoft OneDrive gracefully
 close-system-settings.ps1, closes the System Settings gracefully
 close-thunderbird.ps1, closes Mozilla Thunderbird gracefully
 close-vlc.ps1, closes the VLC media player gracefully
 close-windows-terminal.ps1, closes Windows Terminal gracefully
+copy-photos-sorted.ps1, Copies all photos sorted by year and month 
 configure-git.ps1, sets up the Git user configuration
 convert-csv2txt.ps1, converts the given CSV file into a text list
 convert-mysql2csv.ps1, converts the MySQL database table to a CSV file
+convert-ps2bat.ps1, converts PowerShell script(s) to .bat files
+convert-ps2md.ps1, converts the comment-based help of a PowerShell script to Markdown
 convert-sql2csv.ps1, converts the SQL database table to a CSV file
 convert-txt2wav.ps1, converts text into a audio .WAV file
-create-branch.ps1, creates a new branch in the current/given Git repository 
-create-shortcut.ps1, creates a shortcut
-create-symlink.ps1, creates a symbolic link
-create-tag.ps1, creates a new tag in the current/given Git repository 
 daily-tasks.sh, execute PowerShell scripts automatically as daily tasks (Linux only)
 decrypt-file.ps1, decrypts the given file
 display-time.ps1, displays the current time for 10 seconds by default
@ -65,15 +67,20 @@ download-file.ps1, downloads a file from the given URL
 edit.ps1, edits the given file with the built-in text editor
 enable-crash-dumps.ps1, enables the writing of crash dumps
 enable-god-mode.ps1, enables the god mode (adds a new icon to the desktop)
-enable-ssh-client.ps1, enables the SSH client (needs admin rights)
-enable-ssh-server.ps1, enables the SSH server (needs admin rights)
 encrypt-file.ps1, encrypts the given file
 fetch-repo.ps1, fetches updates for the current/given Git repository (including submodules)
 fetch-repos.ps1, fetches updates for all Git repositories under the current/given directory (including submodules)
 generate-qrcode.ps1, generates a QR code
 hibernate.ps1, enables hibernate mode for the local computer (needs admin rights)
 inspect-exe.ps1, prints basic information of the given executable file
+install-github-cli.ps1, installs GitHub CLI
 install-google-chrome.ps1, installs the Google Chrome browser
+install-knot-resolver.ps1, installs the Knot Resolver (needs admin rights)
+install-signal-cli.ps1, installs signal-cli from github.com/AsamK/signal-cli
+install-ssh-client.ps1, installs the SSH client (needs admin rights)
+install-ssh-server.ps1, installs the SSH server (needs admin rights)
+install-vscode.ps1, installs Visual Studio Code 
+install-wsl.ps1, installs Windows Subsystem for Linux (WSL), needs admin rights
 introduce-powershell.ps1, introduces PowerShell to new users
 list-aliases.ps1, lists all PowerShell aliases 
 list-anagrams.ps1, lists all anagrams of the given word
@ -82,8 +89,12 @@ list-branches.ps1, lists all branches in the current/given Git repository
 list-cheat-sheet.ps1, lists the PowerShell cheat sheet
 list-city-weather.ps1, lists the current weather of cities worldwide (east to west)
 list-commits.ps1, lists all commits in the current/given Git repository 
+list-console-colors.ps1, lists all console colors
+list-countries.ps1, lists details of all countries
+list-cli-tools.ps1, lists available command-line interface (CLI) tools 
 list-clipboard.ps1, lists the contents of the clipboard
 list-credits.ps1, shows the credits
+list-crypto-rates.ps1, lists the current crypto exchange rates 
 list-dir.ps1, lists the directory content (formatted in columns)
 list-dir-tree.ps1, lists the directory tree content 
 list-drives.ps1, lists all drives
@ -98,31 +109,37 @@ list-hidden-files.ps1, lists hidden files within the given directory tree
 list-installed-apps.ps1, lists the installed Windows Store apps
 list-installed-software.ps1, lists the installed software (except Windows Store apps)
 list-latest-tag.ps1, lists the latest tag on the current branch in a Git repository
+list-latest-tags.ps1, lists the latests tags in all Git repositories under the current/given directory 
 list-memos.ps1, lists the memos at $HOME/Memos.csv
 list-unused-files.ps1, lists unused files in a directory tree
 list-cmdlets.ps1, lists the PowerShell cmdlets
 list-earthquakes.ps1, lists earthquakes with magnitude >= 6.0 for the last 30 days
+list-exchange-rates.ps1, lists the exchange rates for the given currency 
 list-modules.ps1, lists the PowerShell modules
 list-mysql-tables.ps1, lists the MySQL server tables
 list-network-shares.ps1, lists the network shares of the local computer
 list-news.ps1, lists the latest news
 list-os-releases.ps1, lists operating system releases and download URL 
 list-os-updates.ps1, lists operating system updates
+list-passwords.ps1, prints a list of random passwords
+list-pins.ps1, prints a list of random PIN's
 list-printers.ps1, lists all printer known to the computer
+list-print-jobs.ps1, lists all jobs of all printers
 list-processes.ps1, lists the local computer processes
 list-profiles.ps1, lists your PowerShell profiles
-list-random-passwords.ps1, prints a list of random passwords
-list-random-pins.ps1, prints a list of random PIN's
 list-recycle-bin.ps1, lists the content of the recycle bin folder
 list-scripts.ps1, lists all PowerShell scripts in this repository
 list-services.ps1, lists the services on the local computer
 list-sql-tables.ps1, lists the SQL server tables
+list-submodules.ps1, lists the submodules of the current/given Git repository
 list-system-info.ps1, lists system information on the local computer
 list-tags.ps1, lists all tags in the current/given Git repository 
 list-tasks.ps1, lists all Windows scheduler tasks
 list-timezone.ps1, lists the current time zone details
 list-timezones.ps1, lists all time zones available 
+list-tiobe-index.ps1, lists the TIOBE index of top programming languages
 list-user-groups.ps1, lists the user groups on the local computer
+list-voices.ps1, lists the installed text-to-speech (TTS) voices
 list-weather.ps1, lists the hourly weather 
 list-workdir.ps1, lists the current working directory
 locate-city.ps1, prints the geographic location of the given city
@ -130,29 +147,43 @@ locate-ipaddress.ps1, prints the geographic location of the given IP address
 locate-zip-code.ps1, prints the geographic location of the given zip-code
 MD5.ps1, prints the MD5 checksum of the given file
 make-install.ps1, installs built executables and libs to the installation directory
+make-repo.ps1, builds the current/given Git repository 
+make-repos.ps1, builds all Git repositories under the current/given directory
 moon.ps1, prints the current moon phase
 mute-audio.ps1, mutes audio
-next-joke.ps1], gets the next random Juck Norris joke
 open-browser.ps1, starts the default Web browser
 open-calculator.ps1, starts the calculator program
 open-email-client.ps1, starts the default email client
 open-file-explorer.ps1, starts the Microsoft File Explorer
+open-netflix.ps1, starts the Netflix app
+open-onedrive.ps1, opens the user's OneDrive folder 
 open-recycle-bin.ps1, starts the File Explorer with the recycle bin folder
 play-beep.ps1, plays a beep sound
 play-files.ps1, plays the given audio files
+play-happy-birthday.ps1, plays the Happy Birthday song
+play-imperial-march.ps1, plays the Imperial March (Star Wars)
+play-jingle-bells.ps1, plays Jingle Bells
 play-mission-impossible.ps1, plays the Mission Impossible theme
 play-m3u.ps1, plays the given playlist (M3U file format)
 play-mp3.ps1, plays the given sound file (MP3 file format)
 play-super-mario.ps1, plays the Super Mario Intro
-play-the-imperial-march.ps1, plays the Imperial March (Star Wars)
+play-tetris-melody.ps1, plays the Tetris melody
 poweroff.ps1, halts the local computer (needs admin rights)
+publish-to-ipfs.ps1, publishes the given files or directory to IPFS
 pull-repo.ps1, pulls updates for the current/given Git repository (including submodules)
 pull-repos.ps1, pulls updates for all Git repositories under the current/given directory (including submodules)
 query-smart-data.ps1, queries the S.M.A.R.T. data of your HDD/SSD's and saves it to the current/given directory
+new-branch.ps1, creates a new branch in the current/given Git repository 
 new-email.ps1, starts the default email client to write a new email
+new-script.ps1, creates a new PowerShell script
+new-shortcut.ps1, creates a new shortcut
+new-symlink.ps1, creates a new symbolic link
+new-tag.ps1, creates a new tag in a Git repository 
 reboot.ps1, reboots the local computer (needs admin rights)
 reboot-fritzbox.ps1, reboots the FRITZ!box device
 remove-empty-dirs.ps1, removes empty subfolders within the given directory tree
+remove-print-jobs.ps1, removes all jobs from all printers
+restart-network-adapters.ps1, restarts all local network adapters
 search-filename.ps1, searches the directory tree for filenames by given pattern 
 search-files.ps1, searches the given pattern in the given files
 scan-ports.ps1, scans the network for open/closed ports
@ -166,16 +197,23 @@ SHA1.ps1, prints the SHA1 checksum of the given file
 SHA256.ps1, prints the SHA256 checksum of the given file
 simulate-matrix.ps1, simulates the Matrix (fun)
 simulate-presence.ps1, simulates the human presence against burglars
+speak-checklist.ps1, speaks the given checklist by text-to-speech (TTS)
 speak-countdown.ps1, starts a countdown by text-to-speech (TTS)
 speak-date.ps1, speaks the current date by text-to-speech (TTS)
 speak-english.ps1, speaks the given text with an English text-to-speech (TTS) voice
 speak-epub.ps1, speaks the content of the given Epub file by text-to-speech (TTS)
 speak-file.ps1, speaks the content of the given text file by text-to-speech (TTS)
+speak-french.ps1, speaks the given text with a French text-to-speech (TTS) voice
 speak-german.ps1, speaks the given text with a German text-to-speech (TTS) voice
-speak-joke.ps1, speaks the next joke by text-to-speech (TTS)
+speak-italian.ps1, speaks the given text with an Italian text-to-speech (TTS) voice
+speak-joke.ps1, speaks a random Chuck Norris joke by text-to-speech (TTS)
+speak-quote.ps1, speaks a random quote by text-to-speech (TTS)
+speak-spanish.ps1, speaks the given text with a Spanish text-to-speech (TTS) voice
 speak-test.ps1, performs a speak test by text-to-speech (TTS)
 speak-text.ps1, speaks the given text by text-to-speech (TTS)
 speak-time.ps1, speaks the current time by text-to-speech (TTS)
+start-calibre-server.ps1, starts a local Calibre server 
+start-ipfs-server.ps1, starts a local IPFS server
 switch-branch.ps1, switches the branch in the current/given Git repository (including submodules)
 switch-shelly1.ps1, switches a Shelly1 device in the local network
 sync-repo.ps1, synchronizes a Git repository by push & pull (including submodules)
@ -187,6 +225,7 @@ translate-text.ps1, translates the given text into other languages
 turn-volume-up.ps1, turns the audio volume up (+10% by default)
 turn-volume-down.ps1, turns the audio volume down (-10% by default)
 unmute-audio.ps1, unmutes audio
+upgrade-ubuntu.ps1, upgrades Ubuntu Linux to the latest (LTS) release 
 upload-file.ps1, uploads the local file to the given FTP server
 voice-control.ps1, executes the PowerShell scripts by voice
 wakeup.ps1, sends a magic packet to the given computer, waking him up
@ -198,13 +237,15 @@ write-big.ps1, writes the given text in big letters
 write-blue.ps1, writes the given text in a blue foreground color
 write-braille.ps1, writes the given text in Braille
 write-green.ps1, writes the given text in a green foreground color
+write-joke.ps1], writes a random Juck Norris joke
 write-lowercase.ps1, writes the given text in lowercase letters
 write-marquee.ps1, writes the given text as marquee
 write-morse-code.ps1, writes the given text in Morse code
 write-motd.ps1, writes the message of the day (MOTD)
+write-quote.ps1, writes a random quote
 write-red.ps1, writes the given text in a red foreground color
 write-rot13.ps1, encodes or decodes the given text with ROT13
 write-typewriter.ps1, writes the given text with the typewriter effect
 write-uppercase.ps1, writes the given text in uppercase letters
 write-vertical.ps1, writes the given text in vertical direction
-zip-dir.ps1, creates a zip archive of the given directory
+zip-dir.ps1, creates a .zip archive of the given directory
--- a/Data/template.ps1
+++ b/Data/template.ps1
@ -0,0 +1,32 @@
+#requires -version 4
+<#
+.SYNOPSIS
+	← enter overview of script here
+.DESCRIPTION
+	← enter brief description of script here
+.INPUTS
+	← enter inputs here (if any, otherwise state None)
+.OUTPUTS
+	← enter outputs here (if any, otherwise state None)
+.EXAMPLE
+	PS> .\template.ps1 ← enter example here (repeat this attribute for more than one example)
+.NOTES
+	Author:        ← enter full name here
+	License:       ← enter license here
+.LINK
+	← enter URL here
+#>
+
+param() # ← enter script parameters here
+
+#	← enter functions here 
+
+try {
+#	← enter instructions here 
+
+	"✔️ Done."
+	exit 0
+} catch {
+	write-error "⚠️ Error in line $($_.InvocationInfo.ScriptLineNumber): $($Error[0])"
+	exit 1
+}
--- a/Docs/FAQ.md
+++ b/Docs/FAQ.md
@ -15,9 +15,9 @@ Why use PowerShell?

 How to get PowerShell?
 ----------------------
-* **On Windows 7 and newer** PowerShell is provided by default. However, script execution is **not allowed by default** (execution policy is "restricted"). To enable this, enter as administrator:
+* **On Windows 7 and newer** PowerShell is provided by default. However, script execution is **disallowed by default** (execution policy is "restricted"). To enable this, enter as administrator:
   ```
-   $ Set-ExecutionPolicy RemoteSigned
+   PS> Set-ExecutionPolicy RemoteSigned
   ```
 * **On CentOS, Debian, Docker, Fedora, macOS, openSUSE, Red Hat, Ubuntu** visit https://github.com/PowerShell/PowerShell for installation.
 * **Want to use Snaps?** Install the PowerShell snap by executing:
@ -26,22 +26,23 @@ How to get PowerShell?
   $ ln -s /snap/bin/pwsh /usr/bin/pwsh
   ```

-How to get the PowerShell Scripts?
----------------------------------
+How to get the collection of PowerShell scripts?
+------------------------------------------------
 * Git users execute: `$ git clone https://github.com/fleschutz/PowerShell`
-* otherwise download it from: https://github.com/fleschutz/PowerShell/archive/master.zip
-
-Some Scripts show gibberish characters. How to fix that?
--------------------------------------------------------
-The PowerShell scripts support Unicode input & output! Use a modern console supporting UTF-8 such as Windows Terminal.
+* otherwise download & unzip: https://github.com/fleschutz/PowerShell/archive/master.zip


-How to set PowerShell as Default Shell on Linux?
+Why do some scripts show gibberish characters?
+----------------------------------------------
+Those PowerShell scripts are using Unicode input & output. Use a modern console supporting UTF-8 such as Windows Terminal, please.
+
+
+How to set PowerShell as default shell on Linux?
 ------------------------------------------------
 Make sure PowerShell is installed, then execute: `chsh -s /usr/bin/pwsh <username>`. In case you experience an "invalid shell" error, add "/usr/bin/pwsh" to /etc/shells.


-How to add the Scripts to the Search Path?
+How to add the scripts to the search path?
 ------------------------------------------
 Want to use the PowerShell scripts everywhere on the command-line? Then you need to add the Scripts/ subfolder to the search path:

@ -49,24 +50,29 @@ Want to use the PowerShell scripts everywhere on the command-line? Then you need
 * **On Windows:** open the environment variables dialogue and add the full path to Scripts/ to the system environment variable "Path"


-How to use PowerShell in Context Menus?
---------------------------------------
-* to enable "right-click > New > Windows PowerShell Script" execute `Add_ps1_to_New_context_menu.reg` in subfolder [Misc/](Misc)
-* to disable this execute `Remove_ps1_from_New_context_menu.reg` in subfolder [Misc/](Misc)
+How to use PowerShell in Windows context menus?
+-----------------------------------------------
+* to enable "right-click > New > Windows PowerShell Script" execute `Add_ps1_to_New_context_menu.reg` in subfolder [Data/](../Data)
+* to disable this execute `Remove_ps1_from_New_context_menu.reg` in subfolder [Data/](../Data)


-How to edit the PowerShell Scripts?
-----------------------------------
-* use *PowerShell ISE* (Integrated Scripting Environment) to write, test and debug scripts (available for free on Windows only).
-* use *Visual Studio Code* supporting syntax highlighting, on-the-fly problem checking and an integrated PowerShell Console (available for free on Linux, Mac OS and Windows).
+Which editor to use for PowerShell scripts?
+-------------------------------------------
+* *PowerShell ISE* (Integrated Scripting Environment) - Official PowerShell development environment included with Microsoft Windows.
+* *Visual Studio Code* - Supporting syntax highlighting, on-the-fly problem checking and an integrated PowerShell Console (available for free on Linux, Mac OS and Windows).
+* *PowerShell Studio* - Powerful PowerShell IDE with module, help, and user interface development tools, high DPI support and regular updates.
+* *PowerShell Plus* - All in one IDE.
+* *Atom package* - Add-on with PowerShell language support for Atom.
+* *SublimeText package* - Add-on with PowerShell language support for Sublime Text.
 * or simply use your *favorite text editor*

-How to write good PowerShell Scripts?
+
+How to write good PowerShell scripts?
 -------------------------------------
 Good PowerShell scripts are user-friendly and platform-independant. As a guideline follow these rules, please:

 1. the filename is named using the `<verb>-<object>.ps1` scheme
-2. the encoding is UTF-8-BOM to support and use Unicode characters (including emojis where appropriate)
+2. the encoding is UTF-8-BOM to support and use Unicode characters
 3. the script has execute file permissions: chmod a+rx <file> (for Linux support)
 4. provide a comment-based help with syntax, description, link, author, and license
 5. check the requirements (e.g. #Requires -RunAsAdministrator, or #Requires -Version 3)
@ -76,6 +82,14 @@ Good PowerShell scripts are user-friendly and platform-independant. As a guideli
 9. on error call write-error with keyword "ERROR:" (to support log parsers) and exit the error code (mostly 1)
 10. on success exit with error code 0 (exit 0)

-Your Question is not answered here?
+
+Found a bug or issue?
+---------------------
+If you find something bad (like a bug, error, or any issue), please report it here by open an Issue.
+
+Or even better: Fork the Repository, fix it and submit a pull request, so others can participate too.  
+
+
+Your question is not answered here?
 -----------------------------------
 Send your question to: markus [at] fleschutz [dot] de
--- a/Docs/MD5.ps1.md
+++ b/Docs/MD5.ps1.md
@ -0,0 +1,14 @@
+# Help for MD5.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+*Generated from comment-based help of MD5.ps1 by convert-ps2md.ps1*
--- a/Docs/SHA1.ps1.md
+++ b/Docs/SHA1.ps1.md
@ -0,0 +1,14 @@
+# Help for SHA1.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+*Generated from comment-based help of SHA1.ps1 by convert-ps2md.ps1*
--- a/Docs/SHA256.ps1.md
+++ b/Docs/SHA256.ps1.md
@ -0,0 +1,14 @@
+# Help for SHA256.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+*Generated from comment-based help of SHA256.ps1 by convert-ps2md.ps1*
--- a/Docs/add-firewall-rules.ps1.md
+++ b/Docs/add-firewall-rules.ps1.md
@ -0,0 +1,43 @@
+# Help for add-firewall-rules.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+add-firewall-rules.ps1 [<path-to-executables>]
+```
+
+Adds firewall rules for the given executables (needs administrator rights).
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/add-firewall-rules.ps1 [[-PathToExecutables] <String>] [<CommonParameters>]
+```
+
+```
+-PathToExecutables <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\add-firewall-rules.ps1 C:\MyApp\bin
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of add-firewall-rules.ps1 by convert-ps2md.ps1*
--- a/Docs/add-memo.ps1.md
+++ b/Docs/add-memo.ps1.md
@ -0,0 +1,43 @@
+# Help for add-memo.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+add-memo.ps1 [<text>]
+```
+
+Adds the given memo text to $HOME/Memos.csv.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/add-memo.ps1 [[-text] <String>] [<CommonParameters>]
+```
+
+```
+-text <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\add-memo.ps1 "Buy apples"
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of add-memo.ps1 by convert-ps2md.ps1*
--- a/Docs/alert.ps1.md
+++ b/Docs/alert.ps1.md
@ -0,0 +1,43 @@
+# Help for alert.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+alert.ps1 [<message>]
+```
+
+Handle and escalate the given alert message.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/alert.ps1 [[-Message] <String>] [<CommonParameters>]
+```
+
+```
+-Message <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\alert.ps1 "Harddisk failure"
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of alert.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-desktop.ps1.md
+++ b/Docs/cd-desktop.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-desktop.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-desktop.ps1
+```
+
+Go to the user's desktop folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-desktop.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-desktop.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-desktop.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-docs.ps1.md
+++ b/Docs/cd-docs.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-docs.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-docs.ps1
+```
+
+Go to the user's documents folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-docs.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-docs.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-docs.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-downloads.ps1.md
+++ b/Docs/cd-downloads.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-downloads.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-downloads.ps1
+```
+
+Go to the user's downloads folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-downloads.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-downloads.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-downloads.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-dropbox.ps1.md
+++ b/Docs/cd-dropbox.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-dropbox.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-dropbox.ps1
+```
+
+Go to the user's Dropbox folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-dropbox.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-dropbox.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-dropbox.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-home.ps1.md
+++ b/Docs/cd-home.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-home.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-home.ps1
+```
+
+Go to the user's home folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-home.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-home.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-home.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-music.ps1.md
+++ b/Docs/cd-music.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-music.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-music.ps1
+```
+
+Go to the user's music folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-music.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-music.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-music.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-onedrive.ps1.md
+++ b/Docs/cd-onedrive.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-onedrive.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-onedrive.ps1
+```
+
+Go to the user's OneDrive folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-onedrive.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-onedrive.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-onedrive.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-pics.ps1.md
+++ b/Docs/cd-pics.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-pics.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-pics.ps1
+```
+
+Go to the user's pictures folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-pics.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-pics.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-pics.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-recycle-bin.ps1.md
+++ b/Docs/cd-recycle-bin.ps1.md
@ -0,0 +1,15 @@
+# Help for cd-recycle-bin.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-recycle-bin.ps1 
+
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+*Generated from comment-based help of cd-recycle-bin.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-repos.ps1.md
+++ b/Docs/cd-repos.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-repos.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-repos.ps1
+```
+
+Go to the user's Git repositories folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-repos.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-repos.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-repos.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-root.ps1.md
+++ b/Docs/cd-root.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-root.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-root.ps1
+```
+
+Go to the root directory (C:\ on Windows).
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-root.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-root.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-root.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-scripts.ps1.md
+++ b/Docs/cd-scripts.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-scripts.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-scripts.ps1
+```
+
+Go to the PowerShell Scripts folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-scripts.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-scripts.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-scripts.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-up.ps1.md
+++ b/Docs/cd-up.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-up.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-up.ps1
+```
+
+Go one directory level up.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-up.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-up.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-up.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-up2.ps1.md
+++ b/Docs/cd-up2.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-up2.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-up2.ps1
+```
+
+Go two directory levels up.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-up2.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-up2.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-up2.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-up3.ps1.md
+++ b/Docs/cd-up3.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-up3.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-up3.ps1
+```
+
+Go three directory levels up.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-up3.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-up3.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-up3.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-up4.ps1.md
+++ b/Docs/cd-up4.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-up4.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-up4.ps1
+```
+
+Go four directory levels up.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-up4.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-up4.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-up4.ps1 by convert-ps2md.ps1*
--- a/Docs/cd-videos.ps1.md
+++ b/Docs/cd-videos.ps1.md
@ -0,0 +1,33 @@
+# Help for cd-videos.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cd-videos.ps1
+```
+
+Go to the user's videos folder.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cd-videos.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cd-videos.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cd-videos.ps1 by convert-ps2md.ps1*
--- a/Docs/check-cpu-temp.ps1.md
+++ b/Docs/check-cpu-temp.ps1.md
@ -0,0 +1,33 @@
+# Help for check-cpu-temp.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-cpu-temp.ps1
+```
+
+Checks the CPU temperature.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-cpu-temp.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-cpu-temp.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-cpu-temp.ps1 by convert-ps2md.ps1*
--- a/Docs/check-dns-resolution.ps1.md
+++ b/Docs/check-dns-resolution.ps1.md
@ -0,0 +1,33 @@
+# Help for check-dns-resolution.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-dns-resolution.ps1
+```
+
+Checks the DNS resolution with frequently used domain names.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-dns-resolution.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-dns-resolution.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-dns-resolution.ps1 by convert-ps2md.ps1*
--- a/Docs/check-drive-space.ps1.md
+++ b/Docs/check-drive-space.ps1.md
@ -0,0 +1,53 @@
+# Help for check-drive-space.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-drive-space.ps1 [<drive>] [<min-level>]
+```
+
+Checks the given drive for free space left.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-drive-space.ps1 [[-Drive] <String>] [[-MinLevel] <Int32>] [<CommonParameters>]
+```
+
+```
+-Drive <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-MinLevel <Int32>
+    
+    Required?                    false
+    Position?                    2
+    Default value                20
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-drive-space.ps1 C
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-drive-space.ps1 by convert-ps2md.ps1*
--- a/Docs/check-file-system.ps1.md
+++ b/Docs/check-file-system.ps1.md
@ -0,0 +1,15 @@
+# Help for check-file-system.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-file-system.ps1 [[-Drive] <string>]
+
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+*Generated from comment-based help of check-file-system.ps1 by convert-ps2md.ps1*
--- a/Docs/check-health.ps1.md
+++ b/Docs/check-health.ps1.md
@ -0,0 +1,34 @@
+# Help for check-health.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-health.ps1
+```
+
+Checks the health of the local computer
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-health.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-health.ps1
+```
+
+
+## Notes
+Author:  Markus Fleschutz
+License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-health.ps1 by convert-ps2md.ps1*
--- a/Docs/check-ipv4-address.ps1.md
+++ b/Docs/check-ipv4-address.ps1.md
@ -0,0 +1,43 @@
+# Help for check-ipv4-address.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-ipv4-address.ps1 [<address>]
+```
+
+Checks the given IPv4 address for validity.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-ipv4-address.ps1 [[-Address] <String>] [<CommonParameters>]
+```
+
+```
+-Address <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-ipv4-address.ps1 192.168.11.22
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-ipv4-address.ps1 by convert-ps2md.ps1*
--- a/Docs/check-ipv6-address.ps1.md
+++ b/Docs/check-ipv6-address.ps1.md
@ -0,0 +1,43 @@
+# Help for check-ipv6-address.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-ipv6-address.ps1 [<address>]
+```
+
+Checks the given IPv6 address for validity.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-ipv6-address.ps1 [[-Address] <String>] [<CommonParameters>]
+```
+
+```
+-Address <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-ipv6-address.ps1 fe80::200:5aee:feaa:20a2
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-ipv6-address.ps1 by convert-ps2md.ps1*
--- a/Docs/check-mac-address.ps1.md
+++ b/Docs/check-mac-address.ps1.md
@ -0,0 +1,43 @@
+# Help for check-mac-address.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-mac-address.ps1 [<MAC>]
+```
+
+Checks the given MAC address for validity (MAC address like 00:00:00:00:00:00 or 00-00-00-00-00-00 or 000000000000).
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-mac-address.ps1 [[-MAC] <String>] [<CommonParameters>]
+```
+
+```
+-MAC <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-mac-address.ps1 11:22:33:44:55:66
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-mac-address.ps1 by convert-ps2md.ps1*
--- a/Docs/check-ping.ps1.md
+++ b/Docs/check-ping.ps1.md
@ -0,0 +1,33 @@
+# Help for check-ping.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-ping.ps1
+```
+
+Checks the ping latency from the local computer to the internet.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-ping.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-ping.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-ping.ps1 by convert-ps2md.ps1*
--- a/Docs/check-subnet-mask.ps1.md
+++ b/Docs/check-subnet-mask.ps1.md
@ -0,0 +1,43 @@
+# Help for check-subnet-mask.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-subnet-mask.ps1 [<address>]
+```
+
+Checks the given subnet mask for validity.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-subnet-mask.ps1 [[-address] <String>] [<CommonParameters>]
+```
+
+```
+-address <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-subnet-mask.ps1 255.255.255.0
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-subnet-mask.ps1 by convert-ps2md.ps1*
--- a/Docs/check-swap-space.ps1.md
+++ b/Docs/check-swap-space.ps1.md
@ -0,0 +1,43 @@
+# Help for check-swap-space.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-swap-space.ps1 [<min-level>]
+```
+
+Checks the free swap space.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-swap-space.ps1 [[-MinLevel] <Int32>] [<CommonParameters>]
+```
+
+```
+-MinLevel <Int32>
+    
+    Required?                    false
+    Position?                    1
+    Default value                50
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-swap-space.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-swap-space.ps1 by convert-ps2md.ps1*
--- a/Docs/check-symlinks.ps1.md
+++ b/Docs/check-symlinks.ps1.md
@ -0,0 +1,43 @@
+# Help for check-symlinks.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-symlinks.ps1 [<dir-tree>]
+```
+
+Checks every symlink in the given directory tree.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-symlinks.ps1 [[-DirTree] <String>] [<CommonParameters>]
+```
+
+```
+-DirTree <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-symlinks.ps1 C:\MyApp
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-symlinks.ps1 by convert-ps2md.ps1*
--- a/Docs/check-weather.ps1.md
+++ b/Docs/check-weather.ps1.md
@ -0,0 +1,43 @@
+# Help for check-weather.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-weather.ps1 [<location>]
+```
+
+Checks the weather for critical values.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-weather.ps1 [[-Location] <String>] [<CommonParameters>]
+```
+
+```
+-Location <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-weather.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-weather.ps1 by convert-ps2md.ps1*
--- a/Docs/check-windows-system-files.ps1.md
+++ b/Docs/check-windows-system-files.ps1.md
@ -0,0 +1,15 @@
+# Help for check-windows-system-files.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-windows-system-files.ps1 
+
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+*Generated from comment-based help of check-windows-system-files.ps1 by convert-ps2md.ps1*
--- a/Docs/check-xml-file.ps1.md
+++ b/Docs/check-xml-file.ps1.md
@ -0,0 +1,43 @@
+# Help for check-xml-file.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+check-xml-file [<file>]
+```
+
+Checks the given XML file for validity.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/check-xml-file.ps1 [[-File] <String>] [<CommonParameters>]
+```
+
+```
+-File <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\check-xml-file.ps1 myfile.xml
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of check-xml-file.ps1 by convert-ps2md.ps1*
--- a/Docs/cherry-picker.ps1.md
+++ b/Docs/cherry-picker.ps1.md
@ -0,0 +1,74 @@
+# Help for cherry-picker.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+cherry-picker.ps1 [<commit-id>] [<commit-message>] [<branches>] [<repo-dir>]
+```
+
+Cherry-picks a Git commit into one or more branches (branch names need to be separated by spaces).
+NOTE: in case of merge conflicts the script stops immediately!
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/cherry-picker.ps1 [[-CommitID] <String>] [[-CommitMessage] <String>] [[-Branches] <String>] [[-RepoDir] <String>] [<CommonParameters>]
+```
+
+```
+-CommitID <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-CommitMessage <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-Branches <String>
+    
+    Required?                    false
+    Position?                    3
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-RepoDir <String>
+    
+    Required?                    false
+    Position?                    4
+    Default value                "$PWD"
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\cherry-picker.ps1 93849f889 "Fix typo" "v1 v2 v3"
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of cherry-picker.ps1 by convert-ps2md.ps1*
--- a/Docs/clean-repo.ps1.md
+++ b/Docs/clean-repo.ps1.md
@ -0,0 +1,43 @@
+# Help for clean-repo.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+clean-repo.ps1 [<repo-dir>]
+```
+
+Cleans a Git repository from untracked files (including submodules, e.g. for a fresh build).
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/clean-repo.ps1 [[-RepoDir] <String>] [<CommonParameters>]
+```
+
+```
+-RepoDir <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                "$PWD"
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\clean-repo.ps1 C:\MyRepo
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of clean-repo.ps1 by convert-ps2md.ps1*
--- a/Docs/clean-repos.ps1.md
+++ b/Docs/clean-repos.ps1.md
@ -0,0 +1,43 @@
+# Help for clean-repos.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+clean-repos.ps1 [<parent-dir>]
+```
+
+Cleans all Git repositories under the current/given directory from untracked files (including submodules).
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/clean-repos.ps1 [[-ParentDir] <String>] [<CommonParameters>]
+```
+
+```
+-ParentDir <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                "$PWD"
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\clean-repos.ps1 C:\MyRepos
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of clean-repos.ps1 by convert-ps2md.ps1*
--- a/Docs/clear-recycle-bin.ps1.md
+++ b/Docs/clear-recycle-bin.ps1.md
@ -0,0 +1,33 @@
+# Help for clear-recycle-bin.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+clear-recycle-bin.ps1
+```
+
+Removes the content of the recycle bin folder (can not be undo).
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/clear-recycle-bin.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\clear-recycle-bin.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of clear-recycle-bin.ps1 by convert-ps2md.ps1*
--- a/Docs/clone-repos.ps1.md
+++ b/Docs/clone-repos.ps1.md
@ -0,0 +1,43 @@
+# Help for clone-repos.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+clone-repos.ps1 [<parent-dir>]
+```
+
+Clones well-known Git repositories under the current/given directory.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/clone-repos.ps1 [[-ParentDir] <String>] [<CommonParameters>]
+```
+
+```
+-ParentDir <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                "$PWD"
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\clone-repos.ps1 C:\MyRepos
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of clone-repos.ps1 by convert-ps2md.ps1*
--- a/Docs/close-calculator.ps1.md
+++ b/Docs/close-calculator.ps1.md
@ -0,0 +1,33 @@
+# Help for close-calculator.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-calculator.ps1
+```
+
+Closes the calculator program gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-calculator.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-calculator.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-calculator.ps1 by convert-ps2md.ps1*
--- a/Docs/close-chrome.ps1.md
+++ b/Docs/close-chrome.ps1.md
@ -0,0 +1,33 @@
+# Help for close-chrome.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-chrome.ps1
+```
+
+Closes the Web browser Google Chrome gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-chrome.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-chrome.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-chrome.ps1 by convert-ps2md.ps1*
--- a/Docs/close-cortana.ps1.md
+++ b/Docs/close-cortana.ps1.md
@ -0,0 +1,33 @@
+# Help for close-cortana.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-cortana.ps1
+```
+
+Closes Cortana gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-cortana.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-cortana.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-cortana.ps1 by convert-ps2md.ps1*
--- a/Docs/close-edge.ps1.md
+++ b/Docs/close-edge.ps1.md
@ -0,0 +1,33 @@
+# Help for close-edge.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-edge.ps1
+```
+
+Closes the Web browser Microsoft Edge gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-edge.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-edge.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-edge.ps1 by convert-ps2md.ps1*
--- a/Docs/close-file-explorer.ps1.md
+++ b/Docs/close-file-explorer.ps1.md
@ -0,0 +1,33 @@
+# Help for close-file-explorer.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-file-explorer.ps1
+```
+
+Closes Microsoft File Explorer gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-file-explorer.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-file-explorer.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-file-explorer.ps1 by convert-ps2md.ps1*
--- a/Docs/close-firefox.ps1.md
+++ b/Docs/close-firefox.ps1.md
@ -0,0 +1,33 @@
+# Help for close-firefox.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-firefox.ps1
+```
+
+Closes the Firefox Web browser gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-firefox.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-firefox.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-firefox.ps1 by convert-ps2md.ps1*
--- a/Docs/close-netflix.ps1.md
+++ b/Docs/close-netflix.ps1.md
@ -0,0 +1,33 @@
+# Help for close-netflix.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-netflix.ps1
+```
+
+Closes the Netflix program gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-netflix.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-netflix.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-netflix.ps1 by convert-ps2md.ps1*
--- a/Docs/close-onedrive.ps1.md
+++ b/Docs/close-onedrive.ps1.md
@ -0,0 +1,33 @@
+# Help for close-onedrive.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-onedrive.ps1
+```
+
+Closes Microsoft OneDrive gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-onedrive.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-onedrive.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-onedrive.ps1 by convert-ps2md.ps1*
--- a/Docs/close-program.ps1.md
+++ b/Docs/close-program.ps1.md
@ -0,0 +1,63 @@
+# Help for close-program.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-program.ps1 [<full-program-name>] [<program-name>] [<program-alias-name>]
+```
+
+Closes the processes of the given program gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-program.ps1 [[-FullProgramName] <String>] [[-ProgramName] <String>] [[-ProgramAliasName] <String>] [<CommonParameters>]
+```
+
+```
+-FullProgramName <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-ProgramName <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-ProgramAliasName <String>
+    
+    Required?                    false
+    Position?                    3
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-program.ps1 "Google Chrome" "chrome.exe"
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-program.ps1 by convert-ps2md.ps1*
--- a/Docs/close-system-settings.ps1.md
+++ b/Docs/close-system-settings.ps1.md
@ -0,0 +1,33 @@
+# Help for close-system-settings.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-system-settings.ps1
+```
+
+Closes the System Settings gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-system-settings.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-system-settings.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-system-settings.ps1 by convert-ps2md.ps1*
--- a/Docs/close-thunderbird.ps1.md
+++ b/Docs/close-thunderbird.ps1.md
@ -0,0 +1,33 @@
+# Help for close-thunderbird.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-thunderbird.ps1
+```
+
+Closes the mail client Mozilla Thunderbird gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-thunderbird.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-thunderbird.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-thunderbird.ps1 by convert-ps2md.ps1*
--- a/Docs/close-vlc.ps1.md
+++ b/Docs/close-vlc.ps1.md
@ -0,0 +1,33 @@
+# Help for close-vlc.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-vlc.ps1
+```
+
+Closes the VLC media player gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-vlc.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-vlc.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-vlc.ps1 by convert-ps2md.ps1*
--- a/Docs/close-windows-terminal.ps1.md
+++ b/Docs/close-windows-terminal.ps1.md
@ -0,0 +1,33 @@
+# Help for close-windows-terminal.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+close-windows-terminal.ps1
+```
+
+Closes Windows Terminal gracefully.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/close-windows-terminal.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\close-windows-terminal.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of close-windows-terminal.ps1 by convert-ps2md.ps1*
--- a/Docs/configure-git.ps1.md
+++ b/Docs/configure-git.ps1.md
@ -0,0 +1,63 @@
+# Help for configure-git.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+configure-git.ps1 [<full-name>] [<email-address>] [<favorite-editor>]
+```
+
+Sets up the Git user configuration.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/configure-git.ps1 [[-FullName] <String>] [[-EmailAddress] <String>] [[-FavoriteEditor] <String>] [<CommonParameters>]
+```
+
+```
+-FullName <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-EmailAddress <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-FavoriteEditor <String>
+    
+    Required?                    false
+    Position?                    3
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\configure-git.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of configure-git.ps1 by convert-ps2md.ps1*
--- a/Docs/convert-csv2txt.ps1.md
+++ b/Docs/convert-csv2txt.ps1.md
@ -0,0 +1,43 @@
+# Help for convert-csv2txt.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+convert-csv2txt.ps1 [<csv-file>]
+```
+
+Converts a .CSV file into a text file.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/convert-csv2txt.ps1 [[-Path] <String>] [<CommonParameters>]
+```
+
+```
+-Path <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\convert-csv2txt.ps1 salaries.csv
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of convert-csv2txt.ps1 by convert-ps2md.ps1*
--- a/Docs/convert-mysql2csv.ps1.md
+++ b/Docs/convert-mysql2csv.ps1.md
@ -0,0 +1,83 @@
+# Help for convert-mysql2csv.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+convert-mysql2csv.ps1 [<server>] [<database>] [<username>] [<password>] [<query>]
+```
+
+Convert a MySQL database table to a .CSV file.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/convert-mysql2csv.ps1 [[-server] <String>] [[-database] <String>] [[-username] <String>] [[-password] <String>] [[-query] <String>] [<CommonParameters>]
+```
+
+```
+-server <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-database <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-username <String>
+    
+    Required?                    false
+    Position?                    3
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-password <String>
+    
+    Required?                    false
+    Position?                    4
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-query <String>
+    
+    Required?                    false
+    Position?                    5
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\convert-mysql2csv.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of convert-mysql2csv.ps1 by convert-ps2md.ps1*
--- a/Docs/convert-ps2bat.ps1.md
+++ b/Docs/convert-ps2bat.ps1.md
@ -0,0 +1,43 @@
+# Help for convert-ps2bat.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+convert-ps2bat.ps1 [<pattern>]
+```
+
+Converts a PowerShell script to .bat files.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/convert-ps2bat.ps1 [[-Pattern] <String>] [<CommonParameters>]
+```
+
+```
+-Pattern <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\convert-ps2bat.ps1 *.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of convert-ps2bat.ps1 by convert-ps2md.ps1*
--- a/Docs/convert-ps2md.ps1.md
+++ b/Docs/convert-ps2md.ps1.md
@ -0,0 +1,43 @@
+# Help for convert-ps2md.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+convert-ps2md.ps1 [<filename>]
+```
+
+Converts the comment-based help of a PowerShell script to Markdown.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/convert-ps2md.ps1 [[-filename] <String>] [<CommonParameters>]
+```
+
+```
+-filename <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\convert-ps2md.ps1 myscript.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of convert-ps2md.ps1 by convert-ps2md.ps1*
--- a/Docs/convert-sql2csv.ps1.md
+++ b/Docs/convert-sql2csv.ps1.md
@ -0,0 +1,83 @@
+# Help for convert-sql2csv.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+convert-sql2csv.ps1 [<server>] [<database>] [<username>] [<password>] [<query>]
+```
+
+Converts a SQL database table to a .CSV file.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/convert-sql2csv.ps1 [[-server] <String>] [[-database] <String>] [[-username] <String>] [[-password] <String>] [[-query] <String>] [<CommonParameters>]
+```
+
+```
+-server <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-database <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-username <String>
+    
+    Required?                    false
+    Position?                    3
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-password <String>
+    
+    Required?                    false
+    Position?                    4
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-query <String>
+    
+    Required?                    false
+    Position?                    5
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\convert-sql2csv.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of convert-sql2csv.ps1 by convert-ps2md.ps1*
--- a/Docs/convert-txt2wav.ps1.md
+++ b/Docs/convert-txt2wav.ps1.md
@ -0,0 +1,53 @@
+# Help for convert-txt2wav.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+convert-txt2wav.ps1 [<text>] [<wav-file>]
+```
+
+Converts text to a .WAV audio file.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/convert-txt2wav.ps1 [[-Text] <String>] [[-WavFile] <String>] [<CommonParameters>]
+```
+
+```
+-Text <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-WavFile <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\convert-txt2wav.ps1 "Hello World" spoken.wav
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of convert-txt2wav.ps1 by convert-ps2md.ps1*
--- a/Docs/copy-photos-sorted.ps1.md
+++ b/Docs/copy-photos-sorted.ps1.md
@ -0,0 +1,53 @@
+# Help for copy-photos-sorted.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+copy-photos-sorted.ps1 [<source-dir>] [<target-dir-tree>]
+```
+
+Copies all photos in source-dir sorted by year and month into the target-dir-tree.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/copy-photos-sorted.ps1 [[-SourceDir] <String>] [[-TargetDirTree] <String>] [<CommonParameters>]
+```
+
+```
+-SourceDir <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-TargetDirTree <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\copy-photos-sorted.ps1 C:\MyPhotos C:\MyPhotoAlbum
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of copy-photos-sorted.ps1 by convert-ps2md.ps1*
--- a/Docs/create-branch.ps1.md
+++ b/Docs/create-branch.ps1.md
@ -0,0 +1,53 @@
+# PowerShell Script create-branch.ps1
+
+## Synopsis & Description
+```powershell
+create-branch.ps1 [<new-branch-name>] [<repo-dir>]
+```
+
+Creates and switches to a new branch in a Git repository.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/create-branch.ps1 [[-NewBranchName] <String>] [[-RepoDir] <String>] [<CommonParameters>]
+```
+
+```
+-NewBranchName <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-RepoDir <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                "$PWD"
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\create-branch.ps1 moonshot
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1*
--- a/Docs/create-shortcut.ps1.md
+++ b/Docs/create-shortcut.ps1.md
@ -0,0 +1,63 @@
+# PowerShell Script create-shortcut.ps1
+
+## Synopsis & Description
+```powershell
+create-shortcut.ps1 [<shortcut>] [<target>] [<description>]
+```
+
+Creates a new shortcut file.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/create-shortcut.ps1 [[-shortcut] <String>] [[-target] <String>] [[-description] <String>] [<CommonParameters>]
+```
+
+```
+-shortcut <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-target <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-description <String>
+    
+    Required?                    false
+    Position?                    3
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\create-shortcut.ps1 C:\Temp\HDD C:\
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1*
--- a/Docs/create-symlink.ps1.md
+++ b/Docs/create-symlink.ps1.md
@ -0,0 +1,14 @@
+# PowerShell Script create-symlink.ps1
+
+## Synopsis & Description
+```powershell
+
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+*Generated by convert-ps2md.ps1*
--- a/Docs/create-tag.ps1.md
+++ b/Docs/create-tag.ps1.md
@ -0,0 +1,53 @@
+# PowerShell Script create-tag.ps1
+
+## Synopsis & Description
+```powershell
+create-tag.ps1 [<new-tag-name>] [<repo-dir>]
+```
+
+Creates a new tag in a Git repository.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/create-tag.ps1 [[-NewTagName] <String>] [[-RepoDir] <String>] [<CommonParameters>]
+```
+
+```
+-NewTagName <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-RepoDir <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                "$PWD"
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\create-tag.ps1 v1.7
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1*
--- a/Docs/decrypt-file.ps1.md
+++ b/Docs/decrypt-file.ps1.md
@ -0,0 +1,53 @@
+# Help for decrypt-file.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+decrypt-file.ps1 [<path>] [<password>]
+```
+
+Decrypts the given file.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/decrypt-file.ps1 [[-Path] <String>] [[-Password] <String>] [<CommonParameters>]
+```
+
+```
+-Path <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-Password <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\decrypt-file-rules.ps1 C:\MyFile.txt "123"
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of decrypt-file.ps1 by convert-ps2md.ps1*
--- a/Docs/display-time.ps1.md
+++ b/Docs/display-time.ps1.md
@ -0,0 +1,43 @@
+# Help for display-time.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+display-time.ps1 [<seconds>]
+```
+
+Displays the current time (for 10 seconds by default).
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/display-time.ps1 [[-Seconds] <Int32>] [<CommonParameters>]
+```
+
+```
+-Seconds <Int32>
+    
+    Required?                    false
+    Position?                    1
+    Default value                10
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\display-time.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of display-time.ps1 by convert-ps2md.ps1*
--- a/Docs/download-dir.ps1.md
+++ b/Docs/download-dir.ps1.md
@ -0,0 +1,43 @@
+# Help for download-dir.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+download-dir.ps1 [<URL>]
+```
+
+Downloads a directory tree from the given URL.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/download-dir.ps1 [[-URL] <String>] [<CommonParameters>]
+```
+
+```
+-URL <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\download-dir.ps1 "https://www.cnn.com"
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of download-dir.ps1 by convert-ps2md.ps1*
--- a/Docs/download-file.ps1.md
+++ b/Docs/download-file.ps1.md
@ -0,0 +1,43 @@
+# Help for download-file.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+download-file.ps1 [<URL>]
+```
+
+Downloads a file from the given URL.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/download-file.ps1 [[-URL] <String>] [<CommonParameters>]
+```
+
+```
+-URL <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\download-file.ps1 "https://www.cnn.com/index.html"
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of download-file.ps1 by convert-ps2md.ps1*
--- a/Docs/edit.ps1.md
+++ b/Docs/edit.ps1.md
@ -0,0 +1,43 @@
+# Help for edit.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+edit.ps1 <filename>
+```
+
+Opens the built-in text editor to edit the given file.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/edit.ps1 [[-Filename] <String>] [<CommonParameters>]
+```
+
+```
+-Filename <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\edit.ps1 C:\MyFile.txt
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of edit.ps1 by convert-ps2md.ps1*
--- a/Docs/enable-crash-dumps.ps1.md
+++ b/Docs/enable-crash-dumps.ps1.md
@ -0,0 +1,33 @@
+# Help for enable-crash-dumps.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+enable-crash-dumps.ps1
+```
+
+Enables the writing of crash dumps.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/enable-crash-dumps.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\enable-crash-dumps.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of enable-crash-dumps.ps1 by convert-ps2md.ps1*
--- a/Docs/enable-god-mode.ps1.md
+++ b/Docs/enable-god-mode.ps1.md
@ -0,0 +1,33 @@
+# Help for enable-god-mode.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+enable-god-mode.ps1
+```
+
+Enables the god mode (adds a new icon to the desktop).
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/enable-god-mode.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\enable-god-mode.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of enable-god-mode.ps1 by convert-ps2md.ps1*
--- a/Docs/encrypt-file.ps1.md
+++ b/Docs/encrypt-file.ps1.md
@ -0,0 +1,53 @@
+# Help for encrypt-file.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+encrypt-file.ps1 [<path>] [<password>]
+```
+
+Encrypts the given file.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/encrypt-file.ps1 [[-Path] <String>] [[-Password] <String>] [<CommonParameters>]
+```
+
+```
+-Path <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+-Password <String>
+    
+    Required?                    false
+    Position?                    2
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\encrypt-file.ps1 C:\MyFile.txt "123"
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of encrypt-file.ps1 by convert-ps2md.ps1*
--- a/Docs/enter-chat.ps1.md
+++ b/Docs/enter-chat.ps1.md
@ -0,0 +1,33 @@
+# Help for enter-chat.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+enter-chat.ps1
+```
+
+Enters a chat using a common network shared file.
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/enter-chat.ps1 [<CommonParameters>]
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\enter-chat.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of enter-chat.ps1 by convert-ps2md.ps1*
--- a/Docs/fetch-repo.ps1.md
+++ b/Docs/fetch-repo.ps1.md
@ -0,0 +1,43 @@
+# Help for fetch-repo.ps1 PowerShell Script
+
+## Synopsis & Description
+```powershell
+fetch-repo.ps1 [<repo-dir>]
+```
+
+Fetches updates for a local Git repository (including submodules).
+
+## Syntax & Parameters
+```powershell
+/home/mf/PowerShell/Scripts/fetch-repo.ps1 [[-RepoDir] <String>] [<CommonParameters>]
+```
+
+```
+-RepoDir <String>
+    
+    Required?                    false
+    Position?                    1
+    Default value                "$PWD"
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+```
+
+```
+[<CommonParameters>]
+    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS>.\fetch-repo.ps1
+```
+
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated from comment-based help of fetch-repo.ps1 by convert-ps2md.ps1*
--- a/Show More
+++ b/Show More