Fix open-obs-studio.ps1

Data/Abbr/Aviation.csv

@@ -1,9 +1,14 @@
-Abbr,Description
+Abbreviation,Definition
 AB,Air Base
 AC,Aircraft
 ACAS,Airborne Collision Avoidance System
+ACC,Area Control Centre
+ADAC,Abu Dhabi Airports
+ADP,Aeroportes de Paris
+AENA,Aeropuertos Españoles y Navegación Aérea
 AF,Air Field
 AFM,Aircraft Flight Manual
+AGL,Above Ground Level
 AIP,Aeronautical Information Publication
 AMAN,Arrival Manager
 AOA,Angle of Attack
@@ -14,18 +19,122 @@ AFM,Airplane Flight Manual
 AGL,Above Ground Level
 AIP,Aeronautical Information Publication
 ANSP,Air Navigation Service Provider
+ARTCC,Air Route Traffic Control Centre
+ASB,Airspace Block
 ATA,Actual Time of Arrival
+ATC,Air Traffic Control
 ATIS,Automatic Terminal Information Service
 ATO,Air Traffic Organization
 BAF,Belgian Air Force
+BWI,Baltimore/Washington International Thurgood Marshall Airport
 CAAC,Civil Aviation Administration of China
 CAAS,Civil Aviation Authorization of Singapore
-CANSO,Civil Air Navigation Services Organization (founded 1996, located in Amsterdam)
+CANSO,Civil Air Navigation Services Organization
 CAS,Calibrated Airspeed
-CAT,Category of aircraft
+CAT,Category of Aircraft
 CAVOK,Ceiling And Visibility OK
+CCBC,Community College Baltimore County
 COG,Center of Gravity
+COTS,Commercial-of-the-shelf
 CRDA,Converging Runway Display Aid
 CTA,Controlled Time of Arrival
+CTA,Controlled Area
 CTOT,Calculated Take-Off Time
+CTR,Control Zone or Controlled Traffic Region
+DAS,DFS Aviation Services (DFS subcompany for services outside Germany)
+DCIA,Dependent Converging Instrument Approach
+DFS,Deutsche Flugsicherung (ATC in Germany)
+DGAC,Direction générale de l'aviation civile
+DTI,Direction Technique Innovation
+DW,Downwind
+EAS,Equivalent Airspeed
+EAVA,Estonian Aviation Academy
+ECAC,European Civil Aviation Conference
+EFM,Gesellschaft für Enteisen und Flugzeugschleppen
+ETA,Estimated Time of Arrival
+ETOPS,Extended Range Twin-engine Aircraft Operations
+FAA,Federal Aviation Administration (USA)
+FAT,Factory Acceptance Test (see also SAT and RAT)
+FE,Field Elevation (highest point of an airport’s usable runways and is measured in height above mean sea level)
+FIA,Flight Information Area
+FIR,Flight Information Region
+FL,Flight Level
+FMG,Flughafen München GmbH
+FOD,Foreign Object Debris
+FOV,Field of View
+GP,Glide Path
+GPS,Global Positioning System
+GS,Ground Speed or Glideslope
+HKIA,Hong Kong International Airport
+IAA,Israeli Airport Authority
+IAF,Israeli Air Force
+IANS,Institute of Air Navigation Services, a division of Eurocontrol
 IAS,Indicated Air Speed
+IATA,International Air Transport Association, HQ in Montreal, Canada
+IG,Image Generator
+IGLR,Integrated Ground Lighting and Radar
+IMC,Instrument Meteorological Conditions
+KAT,Kaufbeuren ATM Training (DFS subcompany)
+LAA,Lappland Aviation Academy
+LL,Lower Limit
+LMUK,Lockheed Martin UK
+LOD,Level of Detail
+LTA,Lower Traffic Area
+LVNL,Luchtverkeersleiding Nederland (Air Traffic Control the Netherlands)
+LVP,Low Visibility Procedures
+MATS,Malta Air Traffic Services
+MEA,Minimum En-route Altitude
+METAR,Meteorological Aerodrome Report
+MSL,Median Sea Level
+OCTA,Outside Control Areas
+PAPI,Precision Approach Path Indicator
+PAR,Precision Approach Radar
+POH,Pilot's Operating Handbook
+PPL,Private Pilot License
+QFE,the altimeter setting that will cause the altimeter to read the height above a specific aerodrome or ground level, and therefore read zero on landing
+QNE,pressure altitude at the landing runway threshold
+QNH,atmospheric pressure adjusted to mean sea level
+RAT,Reliability Acceptance Test (see also FAT and SAT)
+RBAF,Royal Belgium Armed Forces
+RCAF,Royal Canadian Air Force
+RET,Rapid Exit Taxiways
+RJAF,Royal Jordanian Air Force
+RPI,Runway Point of Intercept
+RPM,Rotations per Minute
+RVR,Runway Visual Range
+RWY,Runway
+SAT,Site Acceptance Test (see also FAT and RAT)
+SLOC,Slovenia Control
+STARS,Standard Arrival Routes
+SID,Standard Instrument Departure
+SKYGUIDE,ATC Swiss
+SOW,Statement of Work
+SSR,Secondary Surveillance Radar
+SWT,Switch
+TA,Terminal Airspace
+TAS,Terminal Airspace System
+TAS,True Airspeed
+TCAS,Traffic Collision Avoidance System
+TCL,Taxi Center Lights
+TFDM,Terminal Flight Data Management
+TMA,Terminal Control Area
+TSTC,Texas State Technical College
+TWR,Control Tower,
+UAA,University of Alaska Anchorage
+UMASS,University of Massachusetts
+USAF,US Air Force
+UTA,Upper Traffic Area
+V1,Decision speed, the speed beyond which takeoff should no longer be aborted
+V2,Takeoff speed. The speed at which the aircraft may safely be climbed with one engine inoperative
+VASI,Visual Approach Slope Indicator
+VHF,Very High Frequency
+VMO,maximum operation speed is the air speed than should never be exceeded deliberately in normal operation, whatever the flight situation is
+VOR,VHF Omni-directional Range
+VREF,1.3 times the stalling speed of the aircraft in the stated landing configuration and at the prevailing aircraft weight
+VRR,Voice Recognition & Response
+VS,Stall speed, defined as the minimum steady flight speed at which the airplane is controllable
+VTC,Visual Terminal Chart
+VTOL,vertical take-off and landing
+VSTOL,vertical short take-off and landing
+VTOSL,vertical take-off and short landing
+WTC,Wake Turbulence Category

Data/Abbr/Computer.csv

@@ -0,0 +1,46 @@
+Abbreviation,Definition
+ACID,"Atomicity, Consistency, Isolation, Durability"
+ACL,Access Control List
+ADC,Analog-to-Digital Converter
+ADF,Automatic Document Feeder
+ADSL,Asymmetric Digital Subscriber Line
+AFP,Apple Filing Protocol
+AGP,Accelerated Graphics Port
+AIFF,Audio Interchange File Format
+ALU,Arithmetic Logic Unit
+ANSI,American National Standards Institute
+API,Application Programming Interface
+APU,Accelerated Processing Unit
+ARP,Address Resolution Protocol
+ASCII,American Standard Code for Information Interchange
+ASP,Application Service Provider
+ATM,Asynchronous Transfer Mode
+AVR,Audio/Video Receiver
+Bash,Bourne-Again Shell
+BASIC,Beginner's All-purpose Symbolic Instruction Code
+BCC,Blind Carbon Copy
+BIOS,Basic Input/Output System
+BLE,Bluetooth Low Energy
+Blob,Binary Large Object
+BMP,Bitmap
+BSOD,Blue Screen of Death
+CAD,Computer-Aided Design
+CAN,Campus Area Network
+CD,Compact Disc
+CPU,Central Processing Unit
+CSV,Comma Separated Values (file format)
+DDL,Data Definition Language
+IDE,Integrated Development Environment
+GPU,Graphics Processing Unit
+GUI,Graphical User Interface
+IP,Internet Protocol
+ISP,Internet Service Provider
+IT,Information Technology
+LAN,Local Area Network
+LCD,Liquid Crystal Display
+NIC,Network Interface Card
+PC,Personal Computer
+RAM,Random Access Memory
+URL,Uniform Resource Locator
+VPN,Virtual Private Network
+WAN,Wide Area Network

Data/Abbr/Cooking.csv

@@ -0,0 +1,42 @@
+Abbreviation,Definition
+btl,Bottle
+c,Cup
+C,Cups
+DF,Dairy free
+doz,dozen
+dp,drop
+fl oz,Fluid ounce
+fl ozs,Fluid ounces
+g,Grams
+gal,Gallons
+gals,Gallons
+GF,Gluten free
+kg,Kilograms
+L,Litres
+l,Litres
+lb,Pound
+lbs,Pounds
+lg,large
+lge,large
+md,medium
+med,medium
+mg,Milligrams
+ml,Millilitres
+NRV,Nutrient Reference Value
+oz,Ounce
+ozs,Ounces
+pers,person(s)
+pn,Pinch
+pt,Pint
+pts,Pints
+qt,Quart
+qts,Quarts
+RI,Reference Intake
+serv,serving
+sm,small
+srv,serving
+Tbsp,Tablespoon
+tsp,Teaspoon
+VG,vegetarian
+VN,Vegan
+WF,Wheat free

Data/Abbr/IATA-airport-code.csv

@@ -0,0 +1,5 @@
+Abbreviation,Definition
+ATL,Hartsfield-Jackson Atlanta International Airport (USA)
+CAN,Guangzhou Baiyun International Airport (China)
+CTU,Chengdu Shuangliu International Airport (China)
+DFW,Dallas/Fort Worth International Airport (USA)

Data/Abbr/ICAO-airport-code.csv

@@ -0,0 +1,7 @@
+Abbreviation,Definition
+KATL,Hartsfield-Jackson Atlanta International Airport (USA)
+KDFW,Dallas/Fort Worth International Airport (USA)
+WSSL,Seletar Airport (Singapore)
+WSSS,Singapore Changi Airport (Singapore)
+ZGGG,Guangzhou Baiyun International Airport (China)
+ZUUU,Chengdu Shuangliu International Airport (China)

Data/Abbr/Medicine.csv

@@ -0,0 +1,14 @@
+Abbreviation,Definition
+PR,per the rectum
+pr,per the rectum
+PT,prothrombin time
+PTT,partial thromboplastin time
+pulv,powder
+PV,per the vagina
+q,every
+q12h,every 12 hours
+qd,daily
+q1d,daily
+q2h,every 2 hours
+q3h,every 3 hours
+q4h,every 4 hours

Data/Abbr/Military.csv

@@ -0,0 +1,8 @@
+Abbreviation,Definition
+EOD,Explosive Ordnance Disposal
+HQ,Headquarters
+OP,Observation Post
+POW,Prisoner of War
+RPG,Rocket Propelled Grenade
+SOP,Standard Operating Procedure
+TS,Top Secret

Data/Abbr/Music.csv

@@ -0,0 +1,81 @@
+Abbreviation,Definition
+8va,Octave up
+ad lib,Ad Libitum (“freely”)
+afl,Alto flute
+AS,Al Segno (“To the sign”)
+bc,Basso Continuo (“continuous bass accompaniment”)
+bcl,Bass clarinet
+bfl,Bass flute
+bpm,Beats per minute
+bn,Bassoon
+bob,Bass oboe
+br,Brass instruments
+bstcl,Basset clarinet
+bsthn,Basset horn
+bug,Bugle
+cbcl,Contrabass clarinet
+cbn,Contrabassoon
+cf,Cantus Firmus (“main melody”)
+cl,Clarinet
+cresc,Crescendo (also noted as <)
+crt,Cornet
+D.C. al Coda,Da Capo al Coda (“from the beginning to the Coda sign”)
+D.C. al Fine,Da Capo al Fine (“from the beginning to the end”)
+D.S. al Fine,Dal Segno al Fine (“from the Segno mark to the end”)
+decresc,Descrescendo (also noted as >)
+dim,Diminuendo
+eh,English horn
+euph,Euphonium
+f,Forte
+fda,Flute d’amore (tenor flute)
+ff,Fortissimo
+fff,Fortississimo
+fgh,Flugelhorn
+fl,Flute
+fp,Fortepiano
+gliss,Glissando (“gliding, sliding”)
+hn,Horn
+m,Measure
+mm,Measures
+MM,Metronome tempo
+mf,Mezzo-Forte
+mp,Mezzo-Piano
+mvt,Movement
+ob,Oboe
+oda,Oboe d’amore
+orch,Orchestra
+p,Piano
+p,Page,
+pan,Pan flute
+pic,Piccolo
+picc,Piccolo
+pizz,Pizzicato (“plucking”)
+pp,Pianissio
+pp,Pages
+ppp,Pianississimo
+rall,Rallentando (“gradual slowing”)
+rec,Recorder
+rit,Ritardando (“slowing down”)
+Rf,Rinforzando (“with sudden force”)
+Rfz,Rinforzando (“with sudden force”)
+rpm,Revolutions per minute
+sax,Saxophone
+sf,Sforzando, Sforzato (“sudden accent”)
+sfz,Sforzando, Sforzato (“sudden accent”)
+sfp,Sforzando followed by Piano
+smorz,Smorzando (“dying away”)
+sord,Sordino (“muted”)
+sost. ped,Sostenuto pedal (“sustained pedal”)
+spicc,Spiccato (“bounce bow on a stringed instrument”)
+stacc,Staccato (“playing each note separately from the others”)
+stpt,Slide trumpet
+sul pont,Sul Ponticello (“playing with the bow near the bridge”)
+tba,Tuba
+tbn,Trombone
+tpt,Trumpet
+tr,Trill
+trem,Tremolo (“trembling, wavering”)
+tsx,Tenor saxophone
+vib,Vibrato (“pulsing, vibrating”)
+vol,Volume
+ww,Woodwinds

Data/Abbr/Organizations.csv

@@ -0,0 +1,2 @@
+Abbreviation,Definition
+ISO,International Organization for Standardization

Data/Abbr/Various.csv

@@ -1,4 +1,4 @@
-Abbr,Description
+Abbreviation,Definition
 0D,obvious deed
 1AM,Air Mechanic 1st Class
 1D,One-Dimensional
@@ -104,7 +104,6 @@ ACE- Air Combat Emulator (computer game),Allied Command Europe,Armored Combat Ea
 ACES- Aerolíneas Centrales de Colombia (Spanish, "Central Colombian Airlines"),Auxiliary Campus Enterprises and Services of Alfred State College
 ACF- Administration for Children and Families,American Car and Foundry,American Culinary Federation
 ACHT, Average Call Hold Time
-ACID, Atomicity, Consistency, Isolation, and Durability (in databases)
 ACINT, Acoustic Intelligence
 ACK, Acknowledge (telecommunications; cf. NAK)
 ACL- Access Control List,Anterior cruciate ligament; the initialism can also refer to an injury to this ligament.,Atlantic Coast Line Railroad
@@ -961,7 +960,7 @@ CPR, Cardiopulmonary resuscitation
 CPSM, Continuous Phase Shift Modulation
 CPSU, Communist Party of the Soviet Union
 CPT, Contingency Planning Team
-CPU, Central Processing Unit,Contract Postal Unit
+CPU,Contract Postal Unit
 CPV, Cape Verde (ISO 3166 trigram)
 CPX, Command Post eXercise
 CQ, Carrier Qualification,Central Queensland,Charge of Quarters,Congressional Quarterly,Constellation Airlines (IATA airline designator),Northern Mariana Islands (FIPS 10-4 territory code)
@@ -4560,7 +4559,8 @@ RAE, UK Royal Aircraft Establishment (-1991)
 RAF, Red Army Faction,Royal Air Force
 RAG, Raising and Giving,Rocket Antitank Grenade
 RAGBRAI, Register's Annual Great Bicycle Ride Across Iowa
-RAM, Random Access Memory,Rolling Airframe Missile,Royal Air Maroc
+RAM,Rolling Airframe Missile,
+RAM,Royal Air Maroc
 Ramark, RAdar MARKer
 RAOC, Rear Area Operation Centre
 RAP,(a/i) Radio Access Point,Radiological Assistance Program (U.S. Department of Energy),Rear Area Protection,Recognised [Operating/Operational] Air Picture,Recurring Advance Payment,Relational Associative Processor,Reliable Acoustic Path,Rocket-Assisted Projectile,Rule Against Perpetuities

Data/Checklists/handwashing.txt

@@ -0,0 +1,6 @@
+HEAD Handwashing
+Wet your hands with clean, running water (warm or cold), turn off the tap, and apply soap.
+Lather your hands by rubbing them together with the soap. Lather the backs of your hands, between your fingers, and under your nails.
+Scrub your hands for at least 20 seconds.
+Rinse your hands well under clean, running water.
+Dry your hands using a clean towel or air dry them.

Data/Help/WindowsTerminal.txt

@@ -0,0 +1,45 @@
+Windows Terminal Cheat Sheet
+============================
+
+Application
+-----------
+Alt-F4			Close window
+Ctrl-Shift-f		Find
+Ctrl-Shift-Space	Open dropdown
+Ctrl-,			Open settings file
+Alt-Enter		Toggle full screen
+F11
+
+Tab Commands
+------------
+Ctrl-Shift-d		Duplicate tab
+Ctrl-Shift-t		New tab
+Ctrl-Shift-p		New tab from profile p=1..9
+Ctrl-Tab		Switch to next tab
+Ctrl-Shift-Tab		Switch to previous tab
+Ctrl-Alt-n		Switch to tab n=0..9
+
+Pane Commands
+-------------
+Alt-Shift-d		Split pane optimally. Active profile.
+Alt-Shift--		Split pane horizontally. Default profile.
+Alt-Shift-+		Split pane vertically. Default profile.
+Ctrl-Shift-w		Close innermost pane, tab, or window
+
+Clipboard Commands
+------------------
+Ctrl-c			Copy
+Ctrl-v			Paste
+
+Scrollback Commands
+-------------------
+Ctrl-Shift-up		Scroll up
+Ctrl-Shift-down		Scroll down
+Ctrl-Shift-pgup		Scroll page up
+Ctrl-Shift-pgdn		Scroll page down
+
+Visual Adjustment Commands
+--------------------------
+Ctrl-=			Increase font size
+Ctrl--			Decrease font size
+Ctrl-0			Reset font size

Data/Sounds/README.txt

@@ -0,0 +1 @@
+Animal Sounds by freeanimalsounds.org

Data/TIOBE-index.csv

@@ -0,0 +1,21 @@
+Language, Popularity, Change
+C, 12.54, -4.65
+Python, 11.84, +3.48
+Java, 11.54, -4.56
+C++, 7.36, +1.41
+C#, 4.33, -0.40
+Visual Basic, 4.01, -0.68
+JavaScript, 2.33, +0.06
+PHP, 2.21, -0.05
+Assembly language, 2.05, +1.09
+SQL, 1.88, +0.15
+Classic Visual Basic, 1.72, +1.07
+Groovy, 1.29, +0.87
+Ruby, 1.23, +0.25
+R, 1.20, -0.99
+Perl, 1.18, +0.36
+Swift, 1.10, -0.35
+Fortran, 1.07, +0.80
+Delphi/Object Pascal, 1.06, +0.47
+MATLAB, 1.05, +0.15
+Go, 0.95, -0.06

Data/Templates/serenade.txt

@@ -0,0 +1 @@
+/* Exported by export-scripts2serenade.ps1 */

Data/default.kresd.conf

@@ -0,0 +1,29 @@
+-- SETTINGS FOR KNOT RESOLVER (adapt to your needs, please)
+
+-- LISTEN TO:
+net.listen({'127.0.0.1', '::1'},  53, { kind = 'dns' })
+net.listen({'127.0.0.1', '::1'}, 853, { kind = 'tls' })
+net.listen('192.168.178.71', 53, { kind = 'dns' })
+net.listen('192.168.178.71', 853, { kind = 'tls' })
+
+-- CACHE: 
+cache.size = 100 * MB   -- 100 MB cache size
+cache.min_ttl(3600)     -- 1 hour minimum time-to-live 
+cache.max_ttl(604800)   -- 1 week maximum time-to-live 
+
+-- FORWARD TO:
+policy.add(policy.all(
+   policy.FORWARD(
+      {'192.168.178.1', -- Fritz!Box
+       '1.1.1.1',       -- Cloudflare #1
+       '1.0.0.1'        -- Cloudflare #2
+   })
+))
+
+-- MODULES:
+modules = {
+        predict = {
+                window = 15, -- 15 minutes sampling window
+                period = 6*(60/15) -- track last 6 hours
+        }
+}

Data/domain-names.csv

@@ -1,15 +1,9 @@
 Domain
-3sat.de
-access.ing.de
 accounts.google.com
 activity.windows.com
 airbnb.com
 airbnb.de
 aka.ms
-aldi-nord.de
-aldi-sued.de
-all-in.de
-allgaeuer-zeitung.de
 alternate.de
 api.dropboxapi.com
 api.met.no
@@ -20,19 +14,14 @@ assets.msn.com
 amazon.com
 amazon.de
 amazon.fr
-atcsim.de
 banking.ing-diba.de
-bergwelten.com
-bild.de
 bing.com
 bing.de
 bing.fr
 blitzortung.org
 bolt.dropbox.com
-br.de
 catalog.gamepass.com
 changelogs.ubuntu.com
-chip.de
 client.dropbox.com
 client.wns.windows.com
 clients1.google.com
@@ -54,18 +43,14 @@ earth.google.com
 ebay.com
 ebay.de
 ebay.fr
-ebay-kleinanzeigen.de
 ebook3000.com
 facebook.com
 facebook.de
 facebook.fr
-fleschutz.de
 flightradar24.com
-focus.de
 fonts.google.com
 fonts.googleapis.com
 fonts.gstatic.com
-fosbos-kempten.de
 github.com
 github.map.fastly.net
 gmail.com
@@ -83,50 +68,40 @@ IEEE.org
 ibm.com
 icons8.com
 imap.googlemail.com
-ing.de
 install.robertsspaceindustries.com
 ipfs.io
 ipv6.msftconnecttest.com
 launcher2.robertsspaceindustries.com
 licensing.mp.microsoft.com
-lidl.de
 live.github.com
 live.thunderbird.net
 livepatch.canonical.com
 login.live.com
-login.hrworks.de
 longfiles.com
 mail.google.com
 map.blitzortung.org
 maps.google.com
 maps.google.de
 maps.google.fr
-mebis.bayern.de
 microsoft.com
 mozilla.org
 mtalk.google.com
 music.google.com
-mwittrien.github.io
-netbeat.de
 netflix.com
 news.google.com
 news.google.de
 news.google.fr
 news.url.google.com
-notube.net
 ogs.google.com
 opera.com
 photos.google.com
 pixabay.com
 play.google.com
 plex.tv
-posaunenchor-guenzach.de
 presence.teams.microsoft.com
 ptbtime1.ptb.de
 ptbtime2.ptb.de
 ptbtime3.ptb.de
-rb-allgaeuerland.de
-realschule-oberguenzburg.de
 redbull.tv
 redhat.com
 reichelt.de
@@ -148,7 +123,6 @@ storage.googleapis.com
 substrate.office.com
 t-online.de
 t0.gstatic.com
-tchibo.de
 teams.microsoft.com
 techstage.de
 telemetry.dropbox.com
@@ -161,12 +135,9 @@ translate.google.de
 twitter.com
 twitter.de
 ubuntu.com
-ufainc.com
 update.googleapis.com
 wetter.com
-wetter.de
 wired.com
-ws-kempten.de
 wttr.in
 www.google.com
 www.googleapis.com
@@ -175,4 +146,3 @@ www.netflix.com
 www.youtube.com
 youtube.com
 youtube.de
-zdf.de

Data/git-repos.csv

@@ -0,0 +1,26 @@
+Category,FolderName,Branch,Shallow,URL
+Dev,	 base256unicode,master,  no,	"https://github.com/fleschutz/base256unicode"
+Dev,	 bazel,		master,	 yes,	"https://github.com/bazelbuild/bazel"
+Dev,	 cmake,		master,	 yes,	"https://github.com/Kitware/CMake"
+Fun,	 cmatrix,	master,	 yes,	"https://github.com/abishekvashok/cmatrix"
+Tool,	 cmark,		master,	 yes,	"https://github.com/commonmark/cmark"
+Dev,	 CWTS,		master,  no,	"https://github.com/fleschutz/CWTS"
+Tool,	 elasticsearch,	master,  yes,	"https://github.com/elastic/elasticsearch"
+Tool,	 go-ipfs,	master,	 yes,	"https://github.com/ipfs/go-ipfs"
+Tool,	 grafana,	main,	 yes,	"https://github.com/grafana/grafana"
+Tool,	 leon,          master,  yes,   "https://github.com/leon-ai/leon"
+Dev,	 llvm,		master,  yes,	"https://github.com/llvm/llvm-project"
+Math,	 LSS,		master,	 yes,	"https://github.com/fleschutz/LSS"
+Dev,	 ninja,		master,  yes,	"git://github.com/ninja-build/ninja.git"
+Libs,	 opencv,	master,  yes,	"https://github.com/opencv/opencv"
+Tool,	 OSMA,		master,  no,	"https://github.com/fleschutz/OSMA"
+Shell,	 PowerShell,	master,  no,	"https://github.com/fleschutz/PowerShell"
+Shell,	 pwsh,		master,  yes,	"https://github.com/PowerShell/PowerShell"
+Dev,	 protobuf,	master,	 yes,	"https://github.com/protocolbuffers/protobuf"
+Dev,	 rust,		master,  yes,	"https://github.com/rust-lang/rust"
+Tool,	 smartmontools,	master,  yes,	"https://github.com/smartmontools/smartmontools"
+Tool,	 tensorflow,	master,  yes,	"https://github.com/tensorflow/tensorflow"
+Tool,	 terminal,	main,    yes,	"https://github.com/microsoft/terminal"
+Dev,	 tinycc,	mob,     yes,	"https://github.com/TinyCC/tinycc"
+Tool,	 voice2json,	master,  yes,	"https://github.com/synesthesiam/voice2json"
+Tool,	 zfs,		master,  yes,	"https://github.com/openzfs/zfs"

Data/git-repositories.csv

@@ -1,15 +0,0 @@
-URL,Directory
-"https://github.com/abishekvashok/cmatrix", "cmatrix"
-"https://github.com/commonmark/cmark", "cmark"
-"https://github.com/elastic/elasticsearch", "elasticsearch"
-"https://github.com/fleschutz/CWTS", "CWTS"
-"https://github.com/fleschutz/PowerShell", "PowerShell"
-"https://github.com/fleschutz/LSS", "LSS"
-"https://github.com/fleschutz/base256unicode", "base256unicode"
-"https://github.com/grafana/grafana", "grafana"
-"https://github.com/llvm/llvm-project", "llvm"
-"https://github.com/smartmontools/smartmontools", "smartmontools"
-"https://github.com/synesthesiam/voice2json", "voice2json"
-"https://github.com/TinyCC/tinycc", "tinycc"
-"https://github.com/opencv/opencv", "opencv"
-"https://github.com/openzfs/zfs", "zfs"

Data/http-status-codes.csv

@@ -0,0 +1,65 @@
+"StatusCode","Type","ShortDescription","LongDescription"
+"100","Informational","Continue ","The initial part of a request has been received and has not yet been rejected by the server. The server intends to send a final response after the request has been fully received and acted upon."
+"101","Informational","Switching Protocols ","The server understands and is willing to comply with the client's request, via the Upgrade header field1, for a change in the application protocol being used on this connection."
+"102","Informational","Processing ","An interim response used to inform the client that the server has accepted the complete request, but has not yet completed it."
+"200","Success","OK ","The request has succeeded."
+"201","Success","Created ","The request has been fulfilled and has resulted in one or more new resources being created."
+"202","Success","Accepted ","The request has been accepted for processing, but the processing has not been completed. The request might or might not eventually be acted upon, as it might be disallowed when processing actually takes place."
+"203","Success","Non-authoritative Information ","The request was successful but the enclosed payload has been modified from that of the origin server's 200 OK response by a transforming proxy1."
+"204","Success","No Content ","The server has successfully fulfilled the request and that there is no additional content to send in the response payload body."
+"205","Success","Reset Content ","The server has fulfilled the request and desires that the user agent reset the ""document view"", which caused the request to be sent, to its original state as received from the origin server."
+"206","Success","Partial Content ","The server is successfully fulfilling a range request for the target resource by transferring one or more parts of the selected representation that correspond to the satisfiable ranges found in the request's Range header field1."
+"207","Success","Multi-Status ","A Multi-Status response conveys information about multiple resources in situations where multiple status codes might be appropriate."
+"208","Success","Already Reported ","Used inside a DAV: propstat response element to avoid enumerating the internal members of multiple bindings to the same collection repeatedly."
+"226","Success","IM Used ","The server has fulfilled a GET request for the resource, and the response is a representation of the result of one or more instance-manipulations applied to the current instance."
+"300","Redirection","Multiple Choices ","The target resource has more than one representation, each with its own more specific identifier, and information about the alternatives is being provided so that the user (or user agent) can select a preferred representation by redirecting its request to one or more of those identifiers."
+"301","Redirection","Moved Permanently ","The target resource has been assigned a new permanent URI and any future references to this resource ought to use one of the enclosed URIs."
+"302","Redirection","Found ","The target resource resides temporarily under a different URI. Since the redirection might be altered on occasion, the client ought to continue to use the effective request URI for future requests."
+"303","Redirection","See Other ","The server is redirecting the user agent to a different resource, as indicated by a URI in the Location header field, which is intended to provide an indirect response to the original request."
+"304","Redirection","Not Modified ","A conditional GET or HEAD request has been received and would have resulted in a 200 OK response if it were not for the fact that the condition evaluated to false."
+"305","Redirection","Use Proxy ","Defined in a previous version of this specification and is now deprecated, due to security concerns regarding in-band configuration of a proxy."
+"307","Redirection","Temporary Redirect ","The target resource resides temporarily under a different URI and the user agent MUST NOT change the request method if it performs an automatic redirection to that URI."
+"308","Redirection","Permanent Redirect ","The target resource has been assigned a new permanent URI and any future references to this resource ought to use one of the enclosed URIs."
+"400","Client Error","Bad Request ","The server cannot or will not process the request due to something that is perceived to be a client error (e.g., malformed request syntax, invalid request message framing, or deceptive request routing)."
+"401","Client Error","Unauthorized ","The request has not been applied because it lacks valid authentication credentials for the target resource."
+"402","Client Error","Payment Required ","Reserved for future use."
+"403","Client Error","Forbidden ","The server understood the request but refuses to authorize it."
+"404","Client Error","Not Found ","The origin server did not find a current representation for the target resource or is not willing to disclose that one exists."
+"405","Client Error","Method Not Allowed ","The method received in the request-line is known by the origin server but not supported by the target resource."
+"406","Client Error","Not Acceptable ","The target resource does not have a current representation that would be acceptable to the user agent, according to the proactive negotiation header fields received in the request1, and the server is unwilling to supply a default representation."
+"407","Client Error","Proxy Authentication Required ","Similar to 401 Unauthorized, but it indicates that the client needs to authenticate itself in order to use a proxy."
+"408","Client Error","Request Timeout ","The server did not receive a complete request message within the time that it was prepared to wait."
+"409","Client Error","Conflict ","The request could not be completed due to a conflict with the current state of the target resource. This code is used in situations where the user might be able to resolve the conflict and resubmit the request."
+"410","Client Error","Gone ","The target resource is no longer available at the origin server and that this condition is likely to be permanent."
+"411","Client Error","Length Required ","The server refuses to accept the request without a defined Content-Length1."
+"412","Client Error","Precondition Failed ","One or more conditions given in the request header fields evaluated to false when tested on the server."
+"413","Client Error","Payload Too Large ","The server is refusing to process a request because the request payload is larger than the server is willing or able to process."
+"414","Client Error","Request-URI Too Long ","The server is refusing to service the request because the request-target1 is longer than the server is willing to interpret."
+"415","Client Error","Unsupported Media Type ","The origin server is refusing to service the request because the payload is in a format not supported by this method on the target resource."
+"416","Client Error","Requested Range Not Satisfiable ","None of the ranges in the request's Range header field1 overlap the current extent of the selected resource or that the set of ranges requested has been rejected due to invalid ranges or an excessive request of small or overlapping ranges."
+"417","Client Error","Expectation Failed ","The expectation given in the request's Expect header field1 could not be met by at least one of the inbound servers."
+"418","Client Error","I'm a teapot ","Any attempt to brew coffee with a teapot should result in the error code ""418 I'm a teapot"". The resulting entity body MAY be short and stout."
+"421","Client Error","Misdirected Request ","The request was directed at a server that is not able to produce a response. This can be sent by a server that is not configured to produce responses for the combination of scheme and authority that are included in the request URI."
+"422","Client Error","Unprocessable Entity ","The server understands the content type of the request entity (hence a 415 Unsupported Media Type status code is inappropriate), and the syntax of the request entity is correct (thus a 400 Bad Request status code is inappropriate) but was unable to process the contained instructions."
+"423","Client Error","Locked ","The source or destination resource of a method is locked."
+"424","Client Error","Failed Dependency ","The method could not be performed on the resource because the requested action depended on another action and that action failed."
+"426","Client Error","Upgrade Required ","The server refuses to perform the request using the current protocol but might be willing to do so after the client upgrades to a different protocol."
+"428","Client Error","Precondition Required ","The origin server requires the request to be conditional."
+"429","Client Error","Too Many Requests ","The user has sent too many requests in a given amount of time (""rate limiting"")."
+"431","Client Error","Request Header Fields Too Large ","The server is unwilling to process the request because its header fields are too large. The request MAY be resubmitted after reducing the size of the request header fields."
+"444","Client Error","Connection Closed Without Response ","A non-standard status code used to instruct nginx to close the connection without sending a response to the client, most commonly used to deny malicious or malformed requests."
+"451","Client Error","Unavailable For Legal Reasons ","The server is denying access to the resource as a consequence of a legal demand."
+"499","Client Error","Client Closed Request ","A non-standard status code introduced by nginx for the case when a client closes the connection while nginx is processing the request."
+"500","Server Error","Internal Server Error ","The server encountered an unexpected condition that prevented it from fulfilling the request."
+"501","Server Error","Not Implemented ","The server does not support the functionality required to fulfill the request."
+"502","Server Error","Bad Gateway ","The server, while acting as a gateway or proxy, received an invalid response from an inbound server it accessed while attempting to fulfill the request."
+"503","Server Error","Service Unavailable ","The server is currently unable to handle the request due to a temporary overload or scheduled maintenance, which will likely be alleviated after some delay."
+"504","Server Error","Gateway Timeout ","The server, while acting as a gateway or proxy, did not receive a timely response from an upstream server it needed to access in order to complete the request."
+"505","Server Error","HTTP Version Not Supported ","The server does not support, or refuses to support, the major version of HTTP that was used in the request message."
+"506","Server Error","Variant Also Negotiates ","The server has an internal configuration error: the chosen variant resource is configured to engage in transparent content negotiation itself, and is therefore not a proper end point in the negotiation process."
+"507","Server Error","Insufficient Storage ","The method could not be performed on the resource because the server is unable to store the representation needed to successfully complete the request."
+"508","Server Error","Loop Detected ","The server terminated an operation because it encountered an infinite loop while processing a request with ""Depth: infinity"". This status indicates that the entire operation failed."
+"510","Server Error","Not Extended ","The policy for accessing the resource has not been met in the request. The server should send back all the information necessary for the client to issue an extended request."
+"511","Server Error","Network Authentication Required ","The client needs to authenticate to gain network access."
+"599","Server Error","Network Connect Timeout Error ","This status code is not specified in any RFCs, but is used by some HTTP proxies to signal a network connect timeout behind the proxy to a client in front of the proxy."
+

Data/quotes.csv

@@ -0,0 +1,32 @@
+Genre,Author,Quote
+IQ,Thomas Edison,"Genius is one percent inspiration and ninety-nine percent perspiration."
+Misc,Johann Wolfgang von Goethe,"Difficulties increase the nearer we get to the goal."
+Misc,William Shakespeare,"Having nothing, nothing can he lose."
+Misc,Albert Einstein,"Learn from yesterday, live for today, hope for tomorrow."
+Misc,Michelangelo,"Faith in oneself is the best and safest course."
+Misc,Sophocles,"It takes both sunshine and rain to make a rainbow."
+Misc,Mahatma Gandhi,"We must become the change we want to see."
+Misc,Johann Wolfgang von Goethe,"Knowing is not enough; we must apply!"
+Misc,Immanuel Kant,"Science is organized knowledge. Wisdom is organized life."
+Misc,Indira Gandhi,"You can't shake hands with a clenched fist."
+Misc,Albert Einstein,"Try not to become a man of success, but rather try to become a man of value."
+Misc,Pierre Auguste Renoir,"The pain passes, but the beauty remains."
+Misc,Heraclitus,"All is flux; nothing stays still."
+Misc,Japanese proverb,"The day you decide to do it is your lucky day."
+Misc,Abraham Lincoln,"The best thing about the future is that it only comes one day at a time."
+Misc,Epictetus,"We have two ears and one mouth so that we can listen twice as much as we speak."
+Misc,Cervantes,"Be slow of tongue and quick of eye."
+Misc,Bruce Lee,"Mistakes are always forgivable, if one has the courage to admit them."
+Misc,Nelson Mandela,"The greatest glory in living lies not in never falling, but in rising every time we fall."
+Misc,Walt Disney,"The way to get started is to quit talking and begin doing."
+Misc,John Lennon,"Life is what happens when you're busy making other plans"
+Misc,Mother Teresa,"Spread love everywhere you go. Let no one ever come to you without leaving happier."
+Misc,Benjamin Franklin,"Tell me and I forget. Teach me and I remember. Involve me and I learn."
+Misc,Aristotle,"It is during our darkest moments that we must focus to see the light."
+Misc,Anne Frank,"Whoever is happy will make others happy too."
+Misc,Helen Keller,"Life is either a daring adventure or nothing at all."
+Misc,Abraham Lincoln,"In the end, it's not the years in your life that count. It's the life in your years."
+Misc,Albert Einstein,"Only a life lived for others is a life worthwhile."
+Misc,Mae West,"You only live once, but if you do it right, once is enough."
+Misc,Jonathan Swift,"May you live all the days of your life."
+Misc,Hans Christian Andersen,"Life itself is the most wonderful fairy tale."

Data/scripts.csv

@@ -1,210 +1,293 @@
 Script,Description
-add-firewall-rules.ps1, adds firewall rules to the given executables (needs admin rights)
-add-memo.ps1, adds the given memo text to $HOME/Memos.csv
-build-repo.ps1, builds the current/given Git repository 
-build-repos.ps1, builds all Git repositories under the current/given directory
-cd-desktop.ps1, go to the user's desktop folder
-cd-docs.ps1, go to the user's documents folder
-cd-downloads.ps1, go to the user's downloads folder
-cd-dropbox.ps1, go to the user's Dropbox folder
-cd-home.ps1, go to the user's home folder
-cd-music.ps1, go to the user's music folder
-cd-onedrive.ps1, go to the user's OneDrive folder
-cd-pics.ps1, go to the user's pictures folder
-cd-recycle-bin.ps1, go to the user's recycle bin folder
-cd-repos.ps1, go to the user's Git repositories folder
-cd-root.ps1, go to the root directory (C: on Windows)
-cd-scripts.ps1, go to the PowerShell Scripts folder
-cd-up.ps1, go one directory level up
-cd-up2.ps1, go two directory levels up
-cd-up3.ps1, go three directory levels up
-cd-up4.ps1, go four directory levels up
-cd-videos.ps1, go to the user's videos folder
-check-cpu-temp.ps1, checks the CPU temperature
-check-dns-resolution.ps1, checks the DNS resolution with frequently used domain names
-check-drive-space.ps1, checks the given drive for free space left
-check-file-system.ps1, checks the validity of the file system (needs admin rights)
-check-health.ps1, checks the system health
-check-ipv4-address.ps1, checks the given IPv4 address for validity
-check-ipv6-address.ps1, checks the given IPv6 address for validity
-check-mac-address.ps1, checks the given MAC address for validity
-check-ping.ps1, checks the ping latency to the internet
-check-swap-space.ps1, checks the swap space for free space left
-check-symlinks.ps1, checks every symlink in the given directory tree
-check-weather.ps1, checks the current weather for critical values
-check-windows-system-files.ps1, checks the validity of the Windows system files 
-check-xml-file.ps1, checks the given XML file for validity
-cherry-picker.ps1, cherry-picks a Git commit into multiple branches
-clean-repo.ps1, cleans the current/given Git repository from untracked files (including submodules)
-clear-recycle-bin.ps1, removes the content of the recycle bin folder (can not be undo!)
-clone-repos.ps1, clones well-known Git repositories
-close-calculator.ps1, closes the calculator program gracefully
-close-chrome.ps1, closes Google Chrome gracefully
-close-cortana.ps1, closes Cortana gracefully
-close-edge.ps1, closes Microsoft Edge gracefully
-close-file-explorer.ps1, closes Microsoft File Explorer gracefully
-close-program.ps1, closes the given program gracefully
-close-system-settings.ps1, closes the System Settings gracefully
-close-thunderbird.ps1, closes Mozilla Thunderbird gracefully
-close-vlc.ps1, closes the VLC media player gracefully
-close-windows-terminal.ps1, closes Windows Terminal gracefully
-configure-git.ps1, sets up the Git user configuration
-convert-csv2txt.ps1, converts the given CSV file into a text list
-convert-mysql2csv.ps1, converts the MySQL database table to a CSV file
-convert-sql2csv.ps1, converts the SQL database table to a CSV file
-convert-txt2wav.ps1, converts text into a audio .WAV file
-create-branch.ps1, creates a new branch in the current/given Git repository 
-create-shortcut.ps1, creates a shortcut
-create-symlink.ps1, creates a symbolic link
-create-tag.ps1, creates a new tag in the current/given Git repository 
-daily-tasks.sh, execute PowerShell scripts automatically as daily tasks (Linux only)
-decrypt-file.ps1, decrypts the given file
-display-time.ps1, displays the current time for 10 seconds by default
-download-dir.ps1, downloads a directory tree from the given URL
-download-file.ps1, downloads a file from the given URL
-edit.ps1, edits the given file with the built-in text editor
-enable-crash-dumps.ps1, enables the writing of crash dumps
-enable-god-mode.ps1, enables the god mode (adds a new icon to the desktop)
-enable-ssh-client.ps1, enables the SSH client (needs admin rights)
-enable-ssh-server.ps1, enables the SSH server (needs admin rights)
-encrypt-file.ps1, encrypts the given file
-fetch-repo.ps1, fetches updates for the current/given Git repository (including submodules)
-fetch-repos.ps1, fetches updates for all Git repositories under the current/given directory (including submodules)
-generate-qrcode.ps1, generates a QR code
-hibernate.ps1, enables hibernate mode for the local computer (needs admin rights)
-inspect-exe.ps1, prints basic information of the given executable file
-install-google-chrome.ps1, installs the Google Chrome browser
-introduce-powershell.ps1, introduces PowerShell to new users
-list-aliases.ps1, lists all PowerShell aliases 
-list-anagrams.ps1, lists all anagrams of the given word
-list-automatic-variables.ps1, lists the automatic variables of PowerShell 
-list-branches.ps1, lists all branches in the current/given Git repository 
-list-cheat-sheet.ps1, lists the PowerShell cheat sheet
-list-city-weather.ps1, lists the current weather of cities worldwide (east to west)
-list-commits.ps1, lists all commits in the current/given Git repository 
-list-clipboard.ps1, lists the contents of the clipboard
-list-credits.ps1, shows the credits
-list-dir.ps1, lists the directory content (formatted in columns)
-list-dir-tree.ps1, lists the directory tree content 
-list-drives.ps1, lists all drives
-list-environment-variables.ps1, lists all environment variables
-list-emojis.ps1, lists the emojis of Unicode 13.0
-list-empty-dirs.ps1, lists empty subfolders within the given directory tree
-list-empty-files.ps1, lists empty files within the given directory tree
-list-files.ps1, lists all files in the given folder and also in every subfolder
-list-fritzbox-calls.ps1, lists the FRITZ!Box calls
-list-fritzbox-devices.ps1, lists FRITZ!Box's known devices 
-list-hidden-files.ps1, lists hidden files within the given directory tree
-list-installed-apps.ps1, lists the installed Windows Store apps
-list-installed-software.ps1, lists the installed software (except Windows Store apps)
-list-latest-tag.ps1, lists the latest tag on the current branch in a Git repository
-list-memos.ps1, lists the memos at $HOME/Memos.csv
-list-unused-files.ps1, lists unused files in a directory tree
-list-cmdlets.ps1, lists the PowerShell cmdlets
-list-earthquakes.ps1, lists earthquakes with magnitude >= 6.0 for the last 30 days
-list-modules.ps1, lists the PowerShell modules
-list-mysql-tables.ps1, lists the MySQL server tables
-list-network-shares.ps1, lists the network shares of the local computer
-list-news.ps1, lists the latest news
-list-os-releases.ps1, lists operating system releases and download URL 
-list-os-updates.ps1, lists operating system updates
-list-printers.ps1, lists all printer known to the computer
-list-processes.ps1, lists the local computer processes
-list-profiles.ps1, lists your PowerShell profiles
-list-random-passwords.ps1, prints a list of random passwords
-list-random-pins.ps1, prints a list of random PIN's
-list-recycle-bin.ps1, lists the content of the recycle bin folder
-list-scripts.ps1, lists all PowerShell scripts in this repository
-list-services.ps1, lists the services on the local computer
-list-sql-tables.ps1, lists the SQL server tables
-list-system-info.ps1, lists system information on the local computer
-list-tags.ps1, lists all tags in the current/given Git repository 
-list-tasks.ps1, lists all Windows scheduler tasks
-list-timezone.ps1, lists the current time zone details
-list-timezones.ps1, lists all time zones available 
-list-user-groups.ps1, lists the user groups on the local computer
-list-weather.ps1, lists the hourly weather 
-list-workdir.ps1, lists the current working directory
-locate-city.ps1, prints the geographic location of the given city
-locate-ipaddress.ps1, prints the geographic location of the given IP address
-locate-zip-code.ps1, prints the geographic location of the given zip-code
-MD5.ps1, prints the MD5 checksum of the given file
-make-install.ps1, installs built executables and libs to the installation directory
-moon.ps1, prints the current moon phase
-mute-audio.ps1, mutes audio
-next-joke.ps1], gets the next random Juck Norris joke
-open-browser.ps1, starts the default Web browser
-open-calculator.ps1, starts the calculator program
-open-email-client.ps1, starts the default email client
-open-file-explorer.ps1, starts the Microsoft File Explorer
-open-recycle-bin.ps1, starts the File Explorer with the recycle bin folder
-play-beep.ps1, plays a beep sound
-play-files.ps1, plays the given audio files
-play-mission-impossible.ps1, plays the Mission Impossible theme
-play-m3u.ps1, plays the given playlist (M3U file format)
-play-mp3.ps1, plays the given sound file (MP3 file format)
-play-super-mario.ps1, plays the Super Mario Intro
-play-the-imperial-march.ps1, plays the Imperial March (Star Wars)
-poweroff.ps1, halts the local computer (needs admin rights)
-pull-repo.ps1, pulls updates for the current/given Git repository (including submodules)
-pull-repos.ps1, pulls updates for all Git repositories under the current/given directory (including submodules)
-query-smart-data.ps1, queries the S.M.A.R.T. data of your HDD/SSD's and saves it to the current/given directory
-new-email.ps1, starts the default email client to write a new email
-reboot.ps1, reboots the local computer (needs admin rights)
-reboot-fritzbox.ps1, reboots the FRITZ!box device
-remove-empty-dirs.ps1, removes empty subfolders within the given directory tree
-search-filename.ps1, searches the directory tree for filenames by given pattern 
-search-files.ps1, searches the given pattern in the given files
-scan-ports.ps1, scans the network for open/closed ports
-send-email.ps1, sends an email message
-send-tcp.ps1, sends a TCP message to the given IP address and port
-send-udp.ps1, sends a UDP datagram message to the given IP address and port
-set-profile.ps1, updates your PowerShell user profile
-set-timer.ps1, sets a timer for a countdown
-set-wallpaper.ps1, sets the given image as wallpaper
-SHA1.ps1, prints the SHA1 checksum of the given file
-SHA256.ps1, prints the SHA256 checksum of the given file
-simulate-matrix.ps1, simulates the Matrix (fun)
-simulate-presence.ps1, simulates the human presence against burglars
-speak-countdown.ps1, starts a countdown by text-to-speech (TTS)
-speak-date.ps1, speaks the current date by text-to-speech (TTS)
-speak-english.ps1, speaks the given text with an English text-to-speech (TTS) voice
-speak-epub.ps1, speaks the content of the given Epub file by text-to-speech (TTS)
-speak-file.ps1, speaks the content of the given text file by text-to-speech (TTS)
-speak-german.ps1, speaks the given text with a German text-to-speech (TTS) voice
-speak-joke.ps1, speaks the next joke by text-to-speech (TTS)
-speak-test.ps1, performs a speak test by text-to-speech (TTS)
-speak-text.ps1, speaks the given text by text-to-speech (TTS)
-speak-time.ps1, speaks the current time by text-to-speech (TTS)
-switch-branch.ps1, switches the branch in the current/given Git repository (including submodules)
-switch-shelly1.ps1, switches a Shelly1 device in the local network
-sync-repo.ps1, synchronizes a Git repository by push & pull (including submodules)
-take-screenshot.ps1, takes a single screenshot
-take-screenshots.ps1, takes multiple screenshots
-translate-file.ps1, translates the given text file into another language
-translate-files.ps1, translates the given text files into any supported language
-translate-text.ps1, translates the given text into other languages
-turn-volume-up.ps1, turns the audio volume up (+10% by default)
-turn-volume-down.ps1, turns the audio volume down (-10% by default)
-unmute-audio.ps1, unmutes audio
-upload-file.ps1, uploads the local file to the given FTP server
-voice-control.ps1, executes the PowerShell scripts by voice
-wakeup.ps1, sends a magic packet to the given computer, waking him up
-weather.ps1, prints the current weather forecast
-weather-report.ps1, prints the local weather report
-what-is.ps1, prints a description of the given abbreviation
-write-animated.ps1, writes animated text
-write-big.ps1, writes the given text in big letters
-write-blue.ps1, writes the given text in a blue foreground color
-write-braille.ps1, writes the given text in Braille
-write-green.ps1, writes the given text in a green foreground color
-write-lowercase.ps1, writes the given text in lowercase letters
-write-marquee.ps1, writes the given text as marquee
-write-morse-code.ps1, writes the given text in Morse code
-write-motd.ps1, writes the message of the day (MOTD)
-write-red.ps1, writes the given text in a red foreground color
-write-rot13.ps1, encodes or decodes the given text with ROT13
-write-typewriter.ps1, writes the given text with the typewriter effect
-write-uppercase.ps1, writes the given text in uppercase letters
-write-vertical.ps1, writes the given text in vertical direction
-zip-dir.ps1, creates a zip archive of the given directory
+add-firewall-rules.ps1, Adds firewall rules to the given executables (needs admin rights)
+add-memo.ps1, Adds the given memo text to $HOME/Memos.csv
+build-repo.ps1, Builds a Git repository 
+build-repos.ps1, Builds all Git repositories in a folder
+cd-autostart.ps1, Set the working directory to the user's autostart folder
+cd-desktop.ps1, Set the working directory to the user's desktop folder
+cd-docs.ps1, Set the working directory to the user's documents folder
+cd-downloads.ps1, Set the working directory to the user's downloads folder
+cd-dropbox.ps1, Set the working directory to the user's Dropbox folder
+cd-home.ps1, Set the working directory to the user's home folder
+cd-music.ps1, Set the working directory to the user's music folder
+cd-onedrive.ps1, Set the working directory to the user's OneDrive folder
+cd-pics.ps1, Set the working directory to the user's pictures folder
+cd-recycle-bin.ps1, Set the working directory to the user's recycle bin folder
+cd-repos.ps1, Set the working directory to the user's Git repositories folder
+cd-root.ps1, Set the working directory to the root directory (C: on Windows)
+cd-scripts.ps1, Set the working directory to the PowerShell Scripts folder
+cd-ssh.ps1, Set the working directory to the user's SSH folder
+cd-up.ps1, Set the working directory to one directory level up
+cd-up2.ps1, Set the working directory to two directory levels up
+cd-up3.ps1, Set the working directory to three directory levels up
+cd-up4.ps1, Set the working directory to four directory levels up
+cd-videos.ps1, Set the working directory to the user's videos folder
+check-cpu-temp.ps1, Checks the CPU temperature
+check-dns-resolution.ps1, Checks the DNS resolution with frequently used domain names
+check-drive-space.ps1, Checks a drive for free space left
+check-file-system.ps1, Checks the file system of a drive (needs admin rights)
+check-health.ps1, Checks the system health
+check-ipv4-address.ps1, Checks the given IPv4 address for validity
+check-ipv6-address.ps1, Checks the given IPv6 address for validity
+check-mac-address.ps1, Checks the given MAC address for validity
+check-ping.ps1, Checks the ping latency to the internet
+check-subnet-mask.ps1, Checks the given subnet mask for validity
+check-swap-space.ps1, Checks the swap space for free space left
+check-symlinks.ps1, Checks every symlink in a directory tree
+check-weather.ps1, Checks the current weather for critical values
+check-windows-system-files.ps1, Checks the validity of the Windows system files 
+check-xml-file.ps1, Checks the given XML file for validity
+clean-repo.ps1, Cleans the current/given Git repository from untracked files (including submodules)
+clean-repos.ps1, Cleans all Git repositories under the current/given directory from untracked files (including submodules)
+clear-recycle-bin.ps1, Removes the content of the recycle bin folder (can not be undo!)
+clone-repos.ps1, Clones well-known Git repositories
+close-calculator.ps1, Closes the calculator program gracefully
+close-cortana.ps1, Closes Cortana gracefully
+close-file-explorer.ps1, Closes Microsoft File Explorer gracefully
+close-google-chrome.ps1, Closes the Google Chrome Web browser
+close-program.ps1, Closes the given program gracefully
+close-microsoft-edge.ps1, Closes the Microsoft Edge Web browser
+close-microsoft-store.ps1, Closes the Microsoft Store app
+close-mozilla-firefox.ps1, Closes the Mozilla Firefox Web browser 
+close-netflix.ps1, Closes the Netflix application gracefully
+close-onedrive.ps1, Closes Microsoft OneDrive gracefully
+close-serenade.ps1, Closes the Serenade.ai application gracefully
+close-snipping-tool.ps1, Closes the Snipping Tool application gracefully
+close-spotify.ps1, Closes Spotify
+close-system-settings.ps1, Closes the System Settings gracefully
+close-thunderbird.ps1, Closes Mozilla Thunderbird gracefully
+close-vlc.ps1, Closes the VLC media player application
+close-windows-terminal.ps1, Closes the Windows Terminal application
+copy-photos-sorted.ps1, Copy image files sorted by year and month 
+configure-git.ps1, Sets up the Git user configuration
+convert-csv2txt.ps1, Converts the given CSV file into a text list
+convert-mysql2csv.ps1, Converts the MySQL database table to a CSV file
+convert-ps2bat.ps1, Converts PowerShell script(s) to .bat files
+convert-ps2md.ps1, Converts the comment-based help of a PowerShell script to Markdown
+convert-sql2csv.ps1, Converts the SQL database table to a CSV file
+convert-txt2wav.ps1, Converts text into a audio .WAV file
+daily-tasks.sh, Execute PowerShell scripts automatically as daily tasks (Linux only)
+decrypt-file.ps1, Decrypts the given file
+display-time.ps1, Displays the current time for 10 seconds by default
+download-dir.ps1, Downloads a directory tree from the given URL
+download-file.ps1, Downloads a file from the given URL
+edit.ps1, Edits the given file with the built-in text editor
+enable-crash-dumps.ps1, Enables the writing of crash dumps
+enable-god-mode.ps1, Enables the god mode (adds a new icon to the desktop)
+encrypt-file.ps1, Encrypts the given file
+export-to-manuals.ps1, Converts all scripts as manuals                                    
+export-to-serenade.ps1, Converts all scripts to Serenade for voice control
+fetch-repo.ps1, Fetches updates for the current/given Git repository (including submodules)
+fetch-repos.ps1, Fetches updates for all Git repositories under the current/given directory (including submodules)
+get-md5.ps1, Prints the MD5 checksum of the given file
+get-sha1.ps1, Prints the SHA1 checksum of the given file
+get-sha256.ps1, Prints the SHA256 checksum of the given file
+hibernate.ps1, Enables hibernate mode for the local computer (needs admin rights)
+inspect-exe.ps1, Prints basic information of the given executable file
+install-github-cli.ps1, Installs GitHub CLI
+install-google-chrome.ps1, Installs the Google Chrome browser
+install-knot-resolver.ps1, Installs the Knot Resolver (needs admin rights)
+install-signal-cli.ps1, Installs signal-cli from github.com/AsamK/signal-cli
+install-ssh-client.ps1, Installs the SSH client (needs admin rights)
+install-ssh-server.ps1, Installs the SSH server (needs admin rights)
+install-updates.ps1, Installs updates (needs admin rights)
+install-vscode.ps1, Installs Visual Studio Code 
+install-wsl.ps1, Installs Windows Subsystem for Linux (WSL), needs admin rights
+introduce-powershell.ps1, Introduces PowerShell to new users
+list-aliases.ps1, Lists all PowerShell aliases 
+list-anagrams.ps1, Lists all anagrams of the given word
+list-automatic-variables.ps1, Lists the automatic variables of PowerShell 
+list-branches.ps1, Lists all branches in the current/given Git repository 
+list-cheat-sheet.ps1, Lists the PowerShell cheat sheet
+list-city-weather.ps1, Lists the current weather of cities worldwide (east to west)
+list-commits.ps1, Lists all commits in the current/given Git repository 
+list-console-colors.ps1, Lists all console colors
+list-countries.ps1, Lists details of all countries
+list-cli-tools.ps1, Lists available command-line interface (CLI) tools 
+list-clipboard.ps1, Lists the contents of the clipboard
+list-credits.ps1, Shows the credits
+list-crypto-rates.ps1, Lists the current crypto exchange rates 
+list-dir-tree.ps1, Lists the directory tree content 
+list-drives.ps1, Lists all drives
+list-environment-variables.ps1, Lists all environment variables
+list-emojis.ps1, Lists the emojis of Unicode 13.0
+list-empty-dirs.ps1, Lists empty subfolders within the given directory tree
+list-empty-files.ps1, Lists empty files within the given directory tree
+list-files.ps1, Lists all files in the given folder and also in every subfolder
+list-folder.ps1, Lists the folder content 
+list-fritzbox-calls.ps1, Lists the FRITZ!Box calls
+list-fritzbox-devices.ps1, Lists FRITZ!Box's known devices 
+list-hidden-files.ps1, Lists hidden files within the given directory tree
+list-installed-apps.ps1, Lists the installed Windows Store apps
+list-installed-software.ps1, Lists the installed software (except Windows Store apps)
+list-latest-tag.ps1, Lists the latest tag on the current branch in a Git repository
+list-latest-tags.ps1, Lists the latests tags in all Git repositories under the current/given directory 
+list-memos.ps1, Lists the memos at $HOME/Memos.csv
+list-unused-files.ps1, Lists unused files in a directory tree
+list-cmdlets.ps1, Lists the PowerShell cmdlets
+list-earthquakes.ps1, Lists earthquakes with magnitude >= 6.0 for the last 30 days
+list-exchange-rates.ps1, Lists the exchange rates for the given currency 
+list-modules.ps1, Lists the PowerShell modules
+list-mysql-tables.ps1, Lists the MySQL server tables
+list-network-shares.ps1, Lists the network shares of the local computer
+list-news.ps1, Lists the latest news
+list-os-releases.ps1, Lists operating system releases and download URL 
+list-os-updates.ps1, Lists operating system updates
+list-passwords.ps1, Prints a list of random passwords
+list-pins.ps1, Prints a list of random PIN's
+list-printers.ps1, Lists all printer known to the computer
+list-print-jobs.ps1, Lists all jobs of all printers
+list-processes.ps1, Lists the local computer processes
+list-profiles.ps1, Lists your PowerShell profiles
+list-recycle-bin.ps1, Lists the content of the recycle bin folder
+list-scripts.ps1, Lists all PowerShell scripts in this repository
+list-services.ps1, Lists the services on the local computer
+list-sql-tables.ps1, Lists the SQL server tables
+list-submodules.ps1, Lists the submodules of the current/given Git repository
+list-system-info.ps1, Lists system information on the local computer
+list-tags.ps1, Lists all tags in the current/given Git repository 
+list-tasks.ps1, Lists all Windows scheduler tasks
+list-timezone.ps1, Lists the current time zone details
+list-timezones.ps1, Lists all time zones available 
+list-tiobe-index.ps1, Lists the TIOBE index of top programming languages
+list-user-groups.ps1, Lists the user groups on the local computer
+list-voices.ps1, Lists the installed text-to-speech (TTS) voices
+list-weather.ps1, Lists the hourly weather 
+list-workdir.ps1, Lists the current working directory
+locate-city.ps1, Prints the geographic location of the given city
+locate-ipaddress.ps1, Prints the geographic location of the given IP address
+locate-zip-code.ps1, Prints the geographic location of the given zip-code
+make-install.ps1, Installs built executables and libs to the installation directory
+moon.ps1, Prints the current moon phase
+mute-audio.ps1, Mutes the audio device
+open-amazon.ps1, Opens Amazon's website
+open-browser.ps1, Starts the default Web browser
+open-calculator.ps1, Starts the calculator program
+open-c-drive.ps1, Opens the C: drive folder
+open-downloads-folder.ps1, Opens the user's downloads folder
+open-dropbox-folder.ps1, Opens the user's Dropbox folder
+open-email-client.ps1, Starts the default email client
+open-facebook.ps1, Opens Facebook's website
+open-file-explorer.ps1, Opens the File Explorer
+open-fritz-box.ps1, Opens FRITZ!Box's web interface
+open-github.ps1, Opens GitHub's website
+open-google-contacts.ps1, Opens Google Contacts
+open-google-earth.ps1, Opens Google Earth
+open-google-maps.ps1, Opens Google Maps
+open-google-mail.ps1, Opens Google Mail
+open-google-news.ps1, Opens Google News
+open-google-play.ps1, Opens Google Play
+open-google-search.ps1, Opens Google Search
+open-google-translate.ps1, Opens Google Translate
+open-home-folder.ps1, Opens the user's home folder
+open-music-folder.ps1, Opens the user's music folder
+open-microsoft-edge.ps1, Launches the Microsoft Edge Web browser
+open-microsoft-store.ps1, Starts the Microsoft Store app
+open-netflix.ps1, Starts the Netflix app
+open-notepad.ps1, Starts the Notepad app
+open-onedrive-folder.ps1, Opens the user's OneDrive folder 
+open-recycle-bin.ps1, Opens the user's recycle bin folder
+open-repos-folder.ps1, Opens the user's Git repositories folder
+open-snipping-tools.ps1, Opens the Snipping Tool
+open-speed-test.ps1, Opens Cloudflare's speed test
+open-spotify.ps1, Opens the Spotify app
+open-system-settings.ps1, Launches the Windows system settings 
+open-task-manager.ps1, Launches the Task Manager
+open-toggl-track.ps1, Opens Toggl Track
+open-videos-folder.ps1, Opens the user's videos folder
+open-windows-terminal.ps1, Launches Windows Terminal
+open-wikipedia.ps1, Opens Wikipedia's website
+open-youtube.ps1, Opens YouTube.com
+pick-commit.ps1, Cherry-picks a Git commit into multiple branches
+play-beep-sound.ps1, Plays a short beep sound
+play-files.ps1, Plays the given audio files
+play-happy-birthday.ps1, Plays the Happy Birthday song
+play-imperial-march.ps1, Plays the Imperial March (Star Wars)
+play-jingle-bells.ps1, Plays Jingle Bells
+play-mission-impossible.ps1, Plays the Mission Impossible theme
+play-m3u.ps1, Plays the given playlist (M3U file format)
+play-mp3.ps1, Plays the given sound file (MP3 file format)
+play-super-mario.ps1, Plays the Super Mario Intro
+play-tetris-melody.ps1, Plays the Tetris melody
+poweroff.ps1, Halts the local computer (needs admin rights)
+publish-to-ipfs.ps1, Publishes the given files or directory to IPFS
+pull-repo.ps1, Pulls updates for the current/given Git repository (including submodules)
+pull-repos.ps1, Pulls updates for all Git repositories under the current/given directory (including submodules)
+query-smart-data.ps1, Queries the S.M.A.R.T. data of your HDD/SSD's and saves it to the current/given directory
+new-branch.ps1, Creates a new branch in the current/given Git repository 
+new-email.ps1, Starts the default email client to write a new email
+new-qrcode.ps1, Generates a new QR code
+new-script.ps1, Creates a new PowerShell script
+new-shortcut.ps1, Creates a new shortcut file
+new-symlink.ps1, Creates a new symbolic link file
+new-tag.ps1, Creates a new tag in a Git repository 
+new-zipfile.ps1, Creates a new .zip file from a directory
+reboot.ps1, Reboots the local computer (needs admin rights)
+reboot-fritzbox.ps1, Reboots the FRITZ!box device
+remind-me.ps1, Creates a scheduled task that will display a popup message
+remove-empty-dirs.ps1, Removes empty subfolders within the given directory tree
+remove-print-jobs.ps1, Removes all jobs from all printers
+remove-tag.ps1, Removes a tag in a Git repository 
+replace-in-files.ps1, Search and replace a pattern in the given files by the replacement
+restart-network-adapters.ps1, Restarts all local network adapters
+save-screenshot.ps1, Saves a single screenshot
+say-date.ps1, Say the current date by text-to-speech
+say-joke.ps1, Say a random Chuck Norris joke by text-to-speech
+say-quote.ps1, Say a random quote by text-to-speech
+say-time.ps1, Say the current time by text-to-speech
+search-filename.ps1, Searches the directory tree for filenames by given pattern 
+search-files.ps1, Searches the given pattern in the given files
+scan-ports.ps1, Scans the network for open/closed ports
+send-email.ps1, Sends an email message
+send-tcp.ps1, Sends a TCP message to the given IP address and port
+send-udp.ps1, Sends a UDP datagram message to the given IP address and port
+set-profile.ps1, Updates your PowerShell user profile
+set-timer.ps1, Sets a timer for a countdown
+set-wallpaper.ps1, Sets the given image as wallpaper
+simulate-matrix.ps1, Simulates the Matrix (fun)
+simulate-presence.ps1, Simulates the human presence against burglars
+speak-checklist.ps1, Speaks the given checklist by text-to-speech
+speak-countdown.ps1, Starts a countdown by text-to-speech
+speak-english.ps1, Speaks the given text with an English text-to-speech voice
+speak-epub.ps1, Speaks the content of the given Epub file by text-to-speech
+speak-file.ps1, Speaks the content of the given text file by text-to-speech
+speak-french.ps1, Speaks the given text with a French text-to-speech voice
+speak-german.ps1, Speaks the given text with a German text-to-speech voice
+speak-italian.ps1, Speaks the given text with an Italian text-to-speech voice
+speak-spanish.ps1, Speaks the given text with a Spanish text-to-speech voice
+speak-test.ps1, Performs a speak test by text-to-speech 
+speak-text.ps1, Speaks the given text by text-to-speech
+start-calibre-server.ps1, Starts a local Calibre server 
+start-ipfs-server.ps1, Starts a local IPFS server
+switch-branch.ps1, Switches the branch in the current/given Git repository (including submodules)
+switch-shelly1.ps1, Switches a Shelly1 device in the local network
+sync-repo.ps1, Synchronizes a Git repository by push & pull (including submodules)
+translate-file.ps1, Translates the given text file into another language
+translate-files.ps1, Translates the given text files into any supported language
+translate-text.ps1, Translates the given text into other languages
+turn-volume-up.ps1, Turns the audio volume up (+10% by default)
+turn-volume-down.ps1, Turns the audio volume down (-10% by default)
+unmute-audio.ps1, Unmutes audio
+upgrade-ubuntu.ps1, Upgrades Ubuntu Linux to the latest (LTS) release 
+upload-file.ps1, Uploads the local file to the given FTP server
+wakeup.ps1, Sends a magic packet to the given computer, waking him up
+weather.ps1, Prints the current weather forecast
+weather-report.ps1, Prints the local weather report
+what-is.ps1, Prints a description of the given abbreviation
+write-animated.ps1, Writes animated text
+write-big.ps1, Writes the given text in big letters
+write-blue.ps1, Writes the given text in a blue foreground color
+write-braille.ps1, Writes the given text in Braille
+write-calendar.ps1, Writes the calendar (month or year)
+write-green.ps1, Writes the given text in a green foreground color
+write-joke.ps1], Writes a random Juck Norris joke
+write-lowercase.ps1, Writes the given text in lowercase letters
+write-marquee.ps1, Writes the given text as marquee
+write-morse-code.ps1, Writes the given text in Morse code
+write-motd.ps1, Writes the message of the day (MOTD)
+write-quote.ps1, Writes a random quote
+write-red.ps1, Writes the given text in a red foreground color
+write-rot13.ps1, Encodes or decodes the given text with ROT13
+write-typewriter.ps1, Writes the given text with the typewriter effect
+write-uppercase.ps1, Writes the given text in uppercase letters
+write-vertical.ps1, Writes the given text in vertical direction

Data/template.ps1

@@ -0,0 +1,33 @@
+<#
+.SYNOPSIS
+	← enter overview of script here
+.DESCRIPTION
+	← enter brief description of script here
+.INPUTS
+	← enter inputs here (if any, otherwise state None)
+.OUTPUTS
+	← enter outputs here (if any, otherwise state None)
+.EXAMPLE
+	PS> .\template.ps1 ← enter example here (repeat this attribute for more than one example)
+.NOTES
+	Author:        ← enter full name here
+	License:       ← enter license here
+.LINK
+	← enter URL here
+#>
+
+#requires -version 4
+
+param() # ← enter script parameters here
+
+#	← enter functions here 
+
+try {
+#	← enter instructions here 
+
+	"✔️ Done."
+	exit 0
+} catch {
+	write-error "⚠️ Error in line $($_.InvocationInfo.ScriptLineNumber): $($Error[0])"
+	exit 1
+}

Docs/FAQ.md

@@ -0,0 +1,104 @@
+PowerShell FAQ
+==============
+
+What is PowerShell?
+-------------------
+PowerShell is a task automation and configuration management framework from Microsoft, consisting of a command-line shell and associated scripting language. 
+
+Why use PowerShell?
+-------------------
+✔️ it's **powerful**: fully control your computer
+
+✔️ it's **cross-platform**: available for Linux, Mac OS and Windows
+
+✔️ it's **open-source and free**: see the Github repository at https://github.com/PowerShell/PowerShell 
+
+✔️ it's **easy to learn**: see the tutorial for beginners at https://www.guru99.com/powershell-tutorial.html
+
+✔️ it's **fully documented**: see the PowerShell documentation at https://docs.microsoft.com/en-us/powershell/
+
+How to get PowerShell?
+----------------------
+* **Windows 7 and newer** provides PowerShell by default. However, script execution is **disallowed by default** (execution policy is "restricted"). To enable this, enter as administrator:
+   ```
+   PS> Set-ExecutionPolicy RemoteSigned
+   ```
+* **On CentOS, Debian, Docker, Fedora, macOS, openSUSE, Red Hat, Ubuntu** visit https://github.com/PowerShell/PowerShell for installation.
+* **On Linux supporting Snaps** install PowerShell by executing:
+   ```
+   $ snap install PowerShell
+   $ ln -s /snap/bin/pwsh /usr/bin/pwsh
+   ```
+
+How to get the PowerShell Scripts?
+----------------------------------
+* Git users execute: `$ git clone https://github.com/fleschutz/PowerShell`
+* otherwise download and unzip: https://github.com/fleschutz/PowerShell/archive/master.zip
+
+
+Why do some scripts show gibberish characters?
+----------------------------------------------
+Those PowerShell scripts are using Unicode characters. Use a modern console supporting UTF-8 such as Windows Terminal, please.
+
+
+How to set PowerShell as default shell on Linux?
+------------------------------------------------
+Make sure PowerShell is installed, then execute: `chsh -s /usr/bin/pwsh <username>`. In case you experience an "invalid shell" error, add "/usr/bin/pwsh" to /etc/shells.
+
+
+How to add the scripts to the search path?
+------------------------------------------
+Want to use the PowerShell scripts everywhere on the command-line? Then you need to add the Scripts/ subfolder to the search path:
+
+* **On Linux using Bash:** edit .profile in your home directory and add the line: PATH="$PATH:/path/to/PowerShell/Scripts"
+* **On Windows:** open the environment variables dialogue and add the full path to Scripts/ to the system environment variable "Path"
+
+
+How to use PowerShell in Windows context menus?
+-----------------------------------------------
+* to enable "right-click > New > Windows PowerShell Script" execute `Add_ps1_to_New_context_menu.reg` in subfolder [Data/](../Data)
+* to disable this execute `Remove_ps1_from_New_context_menu.reg` in subfolder [Data/](../Data)
+
+
+How to execute PowerShell scripts by voice?
+-------------------------------------------
+See the [voice control page](VoiceControl.md) for more information.
+
+
+Which editor to use for PowerShell scripts?
+-------------------------------------------
+* *PowerShell ISE* (Integrated Scripting Environment) - Official PowerShell development environment included with Microsoft Windows.
+* *Visual Studio Code* - Supporting syntax highlighting, on-the-fly problem checking and an integrated PowerShell Console (available for free on Linux, Mac OS and Windows).
+* *PowerShell Studio* - Powerful PowerShell IDE with module, help, and user interface development tools, high DPI support and regular updates.
+* *PowerShell Plus* - All in one IDE.
+* *Atom package* - Add-on with PowerShell language support for Atom.
+* *SublimeText package* - Add-on with PowerShell language support for Sublime Text.
+* or simply use your *favorite text editor*
+
+
+How to write good PowerShell scripts?
+-------------------------------------
+Good PowerShell scripts are user-friendly and platform-independant. As a guideline follow these rules, please:
+
+1. the filename is named using the `<verb>-<object>.ps1` scheme
+2. the encoding is UTF-8-BOM to provide Unicode character support
+3. the script has execute file permissions: chmod a+rx <file> (for Linux support)
+4. the script provides a comment-based help with synopsis, description, parameters, link, author, and license
+5. check the requirements (e.g. #Requires -RunAsAdministrator, or #Requires -Version 3)
+6. prefer command-line options, else ask the user for help
+7. recommended is `Set-StrictMode -Version Latest` to enable additional error checking
+8. for readibility use UpperCamelCase for variables and functions, lowerCamelCase for everything else
+9. on error call write-error with keyword "ERROR:" (to support log parsers) and exit the error code (mostly 1)
+10. on success exit with error code 0 (exit 0)
+
+
+Want to contribute or found a bug or issue?
+-------------------------------------------
+If you find something bad (like a bug, error, or any issue), please report it here by open an Issue.
+
+Or even better: Fork the repository, add or fix the script and submit a pull request, so others can participate too.  
+
+
+Your question is not answered here?
+-----------------------------------
+Send your question to: markus [at] fleschutz [dot] de

Docs/VoiceControl.md

@@ -0,0 +1,114 @@
+Executing PowerShell Scripts by Voice
+=====================================
+Voice recognition and response (VRR) is so much fun and so comfortable. Just try it for yourself!
+
+
+🔧 Installation
+--------------
+1. Download and install *Serenade* from https://serenade.ai/ (Serenade is freely available for Linux, MacOS, and Windows).
+2. Download and install the *PowerShell Scripts*, then set the search path to it.
+3. Execute: `./export-to-serenade.ps1 Computer` in the *PowerShell Scripts*, this creates a custom JavaScript file at `$HOME/.serenade/scripts/PowerShell.js` using the wake word 'Computer'. Recommended wake words with a high recognition rate are: "Alexa", "Bixby", "Computer", "James", or "Jarvis". In the following the wake word "Computer" is used.
+
+
+🗣 Usage
+-------
+1. Launch *Serenade* and click into the circle to enable Listening mode.
+2. Launch *Windows Terminal* and click into the window.
+3. Speak into the microphone: `Computer, open calculator` - this executes the PowerShell script `open-calculator.ps1` which launches the calculator application.
+
+More supported voice commands are:
+
+`Computer, open` [app]
+----------------------
+* launches the given application - replace [app] by: `3D-Viewer`, `Calculator`, `Git Extensions`, `Microsoft Paint`, `Microsoft Store`, `Netflix`, `Notepad`, `OBS Studio`, `Outlook`, `Paint 3D`, `Spotify`, `Thunderbird`, `Visual Studio`, or `Windows Terminal`.
+* when finished say: "Computer, close [app]" to close the application.
+
+`Computer, check` [name]
+------------------------
+* lets the computer check something - replace [name] by: `CPU`, `date`, `DNS`, `drives`, `Earth` (fun), `operating system`, `ping`, `swap space`, `time`, `time zone`, `up-time`, `VPN`, or `weather`.
+
+`Computer, open` [name] `browser`
+---------------------------------
+* launches the given Web browser or opens a new tab - replace [name] by: `Chrome`, `default`, `Edge`, or `Firefox`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, open` [name] `drive`
+-------------------------------
+* launches the File Explorer with the given drive - replace [name] by: `C:`, `D:`, `E:`, `F:`, or `M:`.
+* when finished say: "Computer, close file explorer" to close the File Explorer.
+
+
+`Computer, open` [name] `folder`
+--------------------------------
+* launches the File Explorer with the given folder - replace [name] by: `autostart`, `desktop`, `documents`, `downloads`, `Dropbox`, `home`, `music`, `OneDrive`, `pictures`, `recycle bin`, `repos`, or `videos`.
+* when finished say: "Computer, close file explorer" to close the File Explorer.
+
+
+`Computer, open` [name] `website`
+---------------------------------
+* launches the default Web browser with the given website - replace [name] by: `Amazon`, `Apple`, `Baidu`, `BBC`, `BitBucket`, `CDC`, `CIA`, `CNN`, `DistroWatch`, `Dropbox`, `eBay`, `Facebook`, `FBI`, `Flipboard`, `FourSquare`, `FRITZ!Box`, `FRITZ!Repeater`, `GitHub`, `GliderTracker`, `HolidayCheck`, `HRworks`, `Instagram`, `IPFS`, `Microsoft`, `NASA`, `NBC`, `Netflix`, `Notepad`, `Outdoor Active`, `PayPal`, `Pinterest`, `Pixabay`, `Plex`, `Slashdot`, `Snap Store`, `Starbucks`, `Tesla`, `TikTok`, `Topo Map`, `Twitter`,  `UFA`, `Unsplash`, `Walmart`, `WhatsApp`, `White House`, `Windy`, `Wikipedia`, `Wired`, `Wolfram Alpha`, `World News`, `Yahoo`, or `YouTube`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, show` [name] `city`
+------------------------------
+* launches the default Web browser with Google Maps at the given city - replace [name] by: `Atlanta`, `Barcelona`, `Berlin`, `Boston`, `Cairo`, `Cape Town`, `Chicago`, `Dallas`, `Denver`, `Dubai`, `Dublin`, `Frankfurt`, `Hamburg`, `Hong Kong`, `Jerusalem`, `Kansas`, `Las Vegas`, `Lissabon`, `London`, `Los Angeles`, `Madrid`, `Mexico`, `Miami`, `Montreal`, `Moscow`, `Munich`, `New York`, `Panama`, `Paris`, `Rome`, `San Francisco`, `Seattle`, `Singapore`, `Sydney`, `Tokyo`, `Toronto`, `Tunis`, `Vienna`, `Washington`, or `Zurich`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, play radio` [name]
+-----------------------------
+* launches the default Web browser and tunes into an internet radio station - replace [name] by: `7`, `Arabella`, `Bob`, `Club Mix`, `Dance FM`, `FFN`, `Galaxy`, `Gong`, `Ibiza`, `Jam FM`, `Kiss Kiss`, `Malibu`, `N-JOY`, `Paloma`, or `You FM`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, play` [name] `sound`
+-------------------------------
+* starts to play the given audio sound - replace [name] by: `bee`, `beep`, `cat`, `cow`, `dog`, `donkey`, `elephant`, `elk`, `frog`, `goat`, `gorilla`, `horse`, `lion`, `parrot`, `pig`, `rattlesnake`, `vulture`, or `wolf`.
+
+
+`Computer, play` [name] `game`
+------------------------------
+* launches the default Web browser and plays the given game - replace [name] by: `2048`, `Chess`, `Cube`, `Pacman`, `Tetris`, `TicTacToe`, or `Tower`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, open` [name] `settings`
+----------------------------------
+* launches the Windows settings - replace [name] by: `activation`, `apps`, `background`, `backup`, `bluetooth`, `color`, `date`, `default apps`, `developer`, `display`, `ethernet`, `lockscreen`, `maps`, `printer`, `proxy`, `recovery`, `speech`, `start`, `system` *(the top level settings!)*, `taskbar`, `themes`, `time`, `update`, `USB`, `VPN`, or `Wifi`.
+* when finished say: "Computer, close system settings" to close the Windows settings.
+
+
+`Computer, show` [name] `manual`
+--------------------------------
+* launches the default Web browser with the given manual - replace [name] by: `Azure`, `Bash`, `Blender`, `Chrome`, `Edge`, `Firefox`, `Git`, `OBS Studio`, `PowerShell`, `Serenade`, `Vim`, `Voice` *(yes, this page!)*, or `Windows`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+🔊 Audio Voice Commands
+------------------------
+* `Computer, mute audio`
+* `Computer, unmute audio`
+* `Computer, turn volume up`
+* `Computer, turn volume down`
+
+
+💭 Misc Voice Commands
+----------------------
+* `Computer, locate my phone`
+* `Computer, tell joke`
+* `Computer, tell quote`
+
+
+💬 Conversation Commands
+-------------------------
+* `Computer, good morning`
+* `Computer, good evening`
+* `Computer, good night`
+* `Computer, how are you?`
+* `Computer, thank you`
+* `Computer, I'll be back`
+* `Computer, good bye`
+* `Computer, bye-bye`
+* `Computer, see you`

Docs/add-firewall-rules.md

@@ -0,0 +1,38 @@
+## add-firewall-rules.ps1 - Adds firewall rules for executables (needs admin rights)
+
+This script adds firewall rules for the given executable. Administrator rights are required.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/add-firewall-rules.ps1 [[-PathToExecutables] <String>] [<CommonParameters>]
+
+-PathToExecutables <String>
+    Specifies the path to the executables
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./add-firewall-rules C:\MyApp\bin
+Adding firewall rule for C:\MyApp\bin\app1.exe
+Adding firewall rule for C:\MyApp\bin\app2.exe
+...
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of add-firewall-rules.ps1*

Docs/add-memo.md

@@ -0,0 +1,36 @@
+## add-memo.ps1 - Adds a memo text to $HOME/Memos.csv
+
+This script adds the given memo text to $HOME/Memos.csv.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/add-memo.ps1 [[-text] <String>] [<CommonParameters>]
+
+-text <String>
+    Specifies the text to memorize
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./add-memo "Buy apples"
+✔️ added to 📄/home/markus/Memos.csv
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of add-memo.ps1*

Docs/alert.md

@@ -0,0 +1,35 @@
+## alert.ps1 - Handles and escalates an alert
+
+This script handles and escalates the given alert message.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/alert.ps1 [[-Message] <String>] [<CommonParameters>]
+
+-Message <String>
+    Specifies the alert message
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./alert "Harddisk failure"
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of alert.ps1*

Docs/build-repo.md

@@ -0,0 +1,35 @@
+## build-repo.ps1 - Builds a Git repository
+
+This scripts supports building with cmake, configure, autogen, Imakefile and Makefile.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/build-repo.ps1 [[-RepoDir] <String>] [<CommonParameters>]
+
+-RepoDir <String>
+    Specifies the path to the Git repository
+    
+    Required?                    false
+    Position?                    1
+    Default value                "$PWD"
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./build-repo C:\MyRepo
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of build-repo.ps1*

Docs/build-repos.md

@@ -0,0 +1,35 @@
+## build-repos.ps1 - Builds all Git repositories in a folder
+
+This script builds all Git repositories in a given folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/build-repos.ps1 [[-ParentDir] <String>] [<CommonParameters>]
+
+-ParentDir <String>
+    Specifies the path to the folder containing the Git repositories
+    
+    Required?                    false
+    Position?                    1
+    Default value                "$PWD"
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./build-repos C:\MyRepos
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of build-repos.ps1*

Docs/cd-autostart.md

@@ -0,0 +1,27 @@
+## cd-autostart.ps1 - Sets the working directory to the user's autostart folder
+
+This script changes the working directory to the user's autostart folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-autostart.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-autostart
+📂C:\Users\Markus\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-autostart.ps1*

Docs/cd-desktop.md

@@ -0,0 +1,27 @@
+## cd-desktop.ps1 - Sets the working directory to the user's desktop folder
+
+This script changes the working directory to the user's desktop folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-desktop.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-desktop
+📂/home/markus/Desktop
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-desktop.ps1*

Docs/cd-docs.md

@@ -0,0 +1,27 @@
+## cd-docs.ps1 - Sets the working directory to the user's documents folder
+
+This scripts changes the working directory to the user's documents folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-docs.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-docs
+📂/home/markus/Documents
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-docs.ps1*

Docs/cd-downloads.md

@@ -0,0 +1,27 @@
+## cd-downloads.ps1 - Sets the working directory to the user's downloads folder
+
+This script changes the working directory to the user's downloads folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-downloads.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-downloads
+📂/home/markus/Downloads
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-downloads.ps1*

Docs/cd-dropbox.md

@@ -0,0 +1,27 @@
+## cd-dropbox.ps1 - Sets the working directory to the user's Dropbox folder
+
+This script changes the working directory to the user's Dropbox folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-dropbox.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-dropbox
+📂/home/markus/Dropbox
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-dropbox.ps1*

Docs/cd-home.md

@@ -0,0 +1,27 @@
+## cd-home.ps1 - Sets the working directory to the user's home directory
+
+This script changes the working directory to the user's home directory.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-home.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-home
+📂/home/markus
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-home.ps1*

Docs/cd-music.md

@@ -0,0 +1,27 @@
+## cd-music.ps1 - Sets the working directory to the user's music folder
+
+This script changes the working directory to the user's music folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-music.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-music
+📂/home/markus/Music
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-music.ps1*

Docs/cd-onedrive.md

@@ -0,0 +1,27 @@
+## cd-onedrive.ps1 - Sets the working directory to the user's OneDrive folder
+
+This script changes the working directory to the user's OneDrive folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-onedrive.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-onedrive
+📂/home/markus/OneDrive
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-onedrive.ps1*

Docs/cd-pics.md

@@ -0,0 +1,27 @@
+## cd-pics.ps1 - Sets the working directory to the user's pictures folder
+
+This script changes the working directory to the user's pictures folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-pics.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-pics
+📂/home/markus/Pictures
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-pics.ps1*

Docs/cd-recycle-bin.md

@@ -0,0 +1,13 @@
+## cd-recycle-bin.ps1 - cd-recycle-bin.ps1 
+
+
+## Parameters
+```powershell
+
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-recycle-bin.ps1*