Updated cd-recycle-bin.ps1 and cd-trash.ps1

Updated switch-branch.ps1
Updated install-firefox.ps1
2025-06-23 13:31:28 +02:00 · 2025-06-23 13:03:07 +02:00 · 2025-06-23 12:37:54 +02:00 · 2025-06-23 10:13:30 +02:00 · 2025-06-23 09:58:34 +02:00 · 2025-06-23 09:07:33 +02:00
2648 changed files with 324472 additions and 33090 deletions
--- a/.github/FUNDING.yml
+++ b/.github/FUNDING.yml
@ -0,0 +1,3 @@
+# These are supported funding model platforms
+
+github: [fleschutz] # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
--- a/Data/Abbr/Aviation.csv
+++ b/Data/Abbr/Aviation.csv
@ -1,140 +0,0 @@
-Abbreviation,Definition
-AB,Air Base
-AC,Aircraft
-ACAS,Airborne Collision Avoidance System
-ACC,Area Control Centre
-ADAC,Abu Dhabi Airports
-ADP,Aeroportes de Paris
-AENA,Aeropuertos Españoles y Navegación Aérea
-AF,Air Field
-AFM,Aircraft Flight Manual
-AGL,Above Ground Level
-AIP,Aeronautical Information Publication
-AMAN,Arrival Manager
-AOA,Angle of Attack
-AOM,Airplane Operating Manual
-AOR,Area of Responsibility
-AFIS,Aerodrome Flight Information Service
-AFM,Airplane Flight Manual
-AGL,Above Ground Level
-AIP,Aeronautical Information Publication
-ANSP,Air Navigation Service Provider
-ARTCC,Air Route Traffic Control Centre
-ASB,Airspace Block
-ATA,Actual Time of Arrival
-ATC,Air Traffic Control
-ATIS,Automatic Terminal Information Service
-ATO,Air Traffic Organization
-BAF,Belgian Air Force
-BWI,Baltimore/Washington International Thurgood Marshall Airport
-CAAC,Civil Aviation Administration of China
-CAAS,Civil Aviation Authorization of Singapore
-CANSO,Civil Air Navigation Services Organization
-CAS,Calibrated Airspeed
-CAT,Category of Aircraft
-CAVOK,Ceiling And Visibility OK
-CCBC,Community College Baltimore County
-COG,Center of Gravity
-COTS,Commercial-of-the-shelf
-CRDA,Converging Runway Display Aid
-CTA,Controlled Time of Arrival
-CTA,Controlled Area
-CTOT,Calculated Take-Off Time
-CTR,Control Zone or Controlled Traffic Region
-DAS,DFS Aviation Services (DFS subcompany for services outside Germany)
-DCIA,Dependent Converging Instrument Approach
-DFS,Deutsche Flugsicherung (ATC in Germany)
-DGAC,Direction générale de l'aviation civile
-DTI,Direction Technique Innovation
-DW,Downwind
-EAS,Equivalent Airspeed
-EAVA,Estonian Aviation Academy
-ECAC,European Civil Aviation Conference
-EFM,Gesellschaft für Enteisen und Flugzeugschleppen
-ETA,Estimated Time of Arrival
-ETOPS,Extended Range Twin-engine Aircraft Operations
-FAA,Federal Aviation Administration (USA)
-FAT,Factory Acceptance Test (see also SAT and RAT)
-FE,Field Elevation (highest point of an airport’s usable runways and is measured in height above mean sea level)
-FIA,Flight Information Area
-FIR,Flight Information Region
-FL,Flight Level
-FMG,Flughafen München GmbH
-FOD,Foreign Object Debris
-FOV,Field of View
-GP,Glide Path
-GPS,Global Positioning System
-GS,Ground Speed or Glideslope
-HKIA,Hong Kong International Airport
-IAA,Israeli Airport Authority
-IAF,Israeli Air Force
-IANS,Institute of Air Navigation Services, a division of Eurocontrol
-IAS,Indicated Air Speed
-IATA,International Air Transport Association, HQ in Montreal, Canada
-IG,Image Generator
-IGLR,Integrated Ground Lighting and Radar
-IMC,Instrument Meteorological Conditions
-KAT,Kaufbeuren ATM Training (DFS subcompany)
-LAA,Lappland Aviation Academy
-LL,Lower Limit
-LMUK,Lockheed Martin UK
-LOD,Level of Detail
-LTA,Lower Traffic Area
-LVNL,Luchtverkeersleiding Nederland (Air Traffic Control the Netherlands)
-LVP,Low Visibility Procedures
-MATS,Malta Air Traffic Services
-MEA,Minimum En-route Altitude
-METAR,Meteorological Aerodrome Report
-MSL,Median Sea Level
-OCTA,Outside Control Areas
-PAPI,Precision Approach Path Indicator
-PAR,Precision Approach Radar
-POH,Pilot's Operating Handbook
-PPL,Private Pilot License
-QFE,the altimeter setting that will cause the altimeter to read the height above a specific aerodrome or ground level, and therefore read zero on landing
-QNE,pressure altitude at the landing runway threshold
-QNH,atmospheric pressure adjusted to mean sea level
-RAT,Reliability Acceptance Test (see also FAT and SAT)
-RBAF,Royal Belgium Armed Forces
-RCAF,Royal Canadian Air Force
-RET,Rapid Exit Taxiways
-RJAF,Royal Jordanian Air Force
-RPI,Runway Point of Intercept
-RPM,Rotations per Minute
-RVR,Runway Visual Range
-RWY,Runway
-SAT,Site Acceptance Test (see also FAT and RAT)
-SLOC,Slovenia Control
-STARS,Standard Arrival Routes
-SID,Standard Instrument Departure
-SKYGUIDE,ATC Swiss
-SOW,Statement of Work
-SSR,Secondary Surveillance Radar
-SWT,Switch
-TA,Terminal Airspace
-TAS,Terminal Airspace System
-TAS,True Airspeed
-TCAS,Traffic Collision Avoidance System
-TCL,Taxi Center Lights
-TFDM,Terminal Flight Data Management
-TMA,Terminal Control Area
-TSTC,Texas State Technical College
-TWR,Control Tower,
-UAA,University of Alaska Anchorage
-UMASS,University of Massachusetts
-USAF,US Air Force
-UTA,Upper Traffic Area
-V1,Decision speed, the speed beyond which takeoff should no longer be aborted
-V2,Takeoff speed. The speed at which the aircraft may safely be climbed with one engine inoperative
-VASI,Visual Approach Slope Indicator
-VHF,Very High Frequency
-VMO,maximum operation speed is the air speed than should never be exceeded deliberately in normal operation, whatever the flight situation is
-VOR,VHF Omni-directional Range
-VREF,1.3 times the stalling speed of the aircraft in the stated landing configuration and at the prevailing aircraft weight
-VRR,Voice Recognition & Response
-VS,Stall speed, defined as the minimum steady flight speed at which the airplane is controllable
-VTC,Visual Terminal Chart
-VTOL,vertical take-off and landing
-VSTOL,vertical short take-off and landing
-VTOSL,vertical take-off and short landing
-WTC,Wake Turbulence Category
--- a/Data/Abbr/Computer.csv
+++ b/Data/Abbr/Computer.csv
@ -1,46 +0,0 @@
-Abbreviation,Definition
-ACID,"Atomicity, Consistency, Isolation, Durability"
-ACL,Access Control List
-ADC,Analog-to-Digital Converter
-ADF,Automatic Document Feeder
-ADSL,Asymmetric Digital Subscriber Line
-AFP,Apple Filing Protocol
-AGP,Accelerated Graphics Port
-AIFF,Audio Interchange File Format
-ALU,Arithmetic Logic Unit
-ANSI,American National Standards Institute
-API,Application Programming Interface
-APU,Accelerated Processing Unit
-ARP,Address Resolution Protocol
-ASCII,American Standard Code for Information Interchange
-ASP,Application Service Provider
-ATM,Asynchronous Transfer Mode
-AVR,Audio/Video Receiver
-Bash,Bourne-Again Shell
-BASIC,Beginner's All-purpose Symbolic Instruction Code
-BCC,Blind Carbon Copy
-BIOS,Basic Input/Output System
-BLE,Bluetooth Low Energy
-Blob,Binary Large Object
-BMP,Bitmap
-BSOD,Blue Screen of Death
-CAD,Computer-Aided Design
-CAN,Campus Area Network
-CD,Compact Disc
-CPU,Central Processing Unit
-CSV,Comma Separated Values (file format)
-DDL,Data Definition Language
-IDE,Integrated Development Environment
-GPU,Graphics Processing Unit
-GUI,Graphical User Interface
-IP,Internet Protocol
-ISP,Internet Service Provider
-IT,Information Technology
-LAN,Local Area Network
-LCD,Liquid Crystal Display
-NIC,Network Interface Card
-PC,Personal Computer
-RAM,Random Access Memory
-URL,Uniform Resource Locator
-VPN,Virtual Private Network
-WAN,Wide Area Network
--- a/Data/Abbr/Cooking.csv
+++ b/Data/Abbr/Cooking.csv
@ -1,42 +0,0 @@
-Abbreviation,Definition
-btl,Bottle
-c,Cup
-C,Cups
-DF,Dairy free
-doz,dozen
-dp,drop
-fl oz,Fluid ounce
-fl ozs,Fluid ounces
-g,Grams
-gal,Gallons
-gals,Gallons
-GF,Gluten free
-kg,Kilograms
-L,Litres
-l,Litres
-lb,Pound
-lbs,Pounds
-lg,large
-lge,large
-md,medium
-med,medium
-mg,Milligrams
-ml,Millilitres
-NRV,Nutrient Reference Value
-oz,Ounce
-ozs,Ounces
-pers,person(s)
-pn,Pinch
-pt,Pint
-pts,Pints
-qt,Quart
-qts,Quarts
-RI,Reference Intake
-serv,serving
-sm,small
-srv,serving
-Tbsp,Tablespoon
-tsp,Teaspoon
-VG,vegetarian
-VN,Vegan
-WF,Wheat free
--- a/Data/Abbr/IATA-airport-code.csv
+++ b/Data/Abbr/IATA-airport-code.csv
@ -1,5 +0,0 @@
-Abbreviation,Definition
-ATL,Hartsfield-Jackson Atlanta International Airport (USA)
-CAN,Guangzhou Baiyun International Airport (China)
-CTU,Chengdu Shuangliu International Airport (China)
-DFW,Dallas/Fort Worth International Airport (USA)
--- a/Data/Abbr/ICAO-airport-code.csv
+++ b/Data/Abbr/ICAO-airport-code.csv
@ -1,7 +0,0 @@
-Abbreviation,Definition
-KATL,Hartsfield-Jackson Atlanta International Airport (USA)
-KDFW,Dallas/Fort Worth International Airport (USA)
-WSSL,Seletar Airport (Singapore)
-WSSS,Singapore Changi Airport (Singapore)
-ZGGG,Guangzhou Baiyun International Airport (China)
-ZUUU,Chengdu Shuangliu International Airport (China)
--- a/Data/Abbr/Medicine.csv
+++ b/Data/Abbr/Medicine.csv
@ -1,14 +0,0 @@
-Abbreviation,Definition
-PR,per the rectum
-pr,per the rectum
-PT,prothrombin time
-PTT,partial thromboplastin time
-pulv,powder
-PV,per the vagina
-q,every
-q12h,every 12 hours
-qd,daily
-q1d,daily
-q2h,every 2 hours
-q3h,every 3 hours
-q4h,every 4 hours
--- a/Data/Abbr/Military.csv
+++ b/Data/Abbr/Military.csv
@ -1,8 +0,0 @@
-Abbreviation,Definition
-EOD,Explosive Ordnance Disposal
-HQ,Headquarters
-OP,Observation Post
-POW,Prisoner of War
-RPG,Rocket Propelled Grenade
-SOP,Standard Operating Procedure
-TS,Top Secret
--- a/Data/Abbr/Music.csv
+++ b/Data/Abbr/Music.csv
@ -1,81 +0,0 @@
-Abbreviation,Definition
-8va,Octave up
-ad lib,Ad Libitum (“freely”)
-afl,Alto flute
-AS,Al Segno (“To the sign”)
-bc,Basso Continuo (“continuous bass accompaniment”)
-bcl,Bass clarinet
-bfl,Bass flute
-bpm,Beats per minute
-bn,Bassoon
-bob,Bass oboe
-br,Brass instruments
-bstcl,Basset clarinet
-bsthn,Basset horn
-bug,Bugle
-cbcl,Contrabass clarinet
-cbn,Contrabassoon
-cf,Cantus Firmus (“main melody”)
-cl,Clarinet
-cresc,Crescendo (also noted as <)
-crt,Cornet
-D.C. al Coda,Da Capo al Coda (“from the beginning to the Coda sign”)
-D.C. al Fine,Da Capo al Fine (“from the beginning to the end”)
-D.S. al Fine,Dal Segno al Fine (“from the Segno mark to the end”)
-decresc,Descrescendo (also noted as >)
-dim,Diminuendo
-eh,English horn
-euph,Euphonium
-f,Forte
-fda,Flute d’amore (tenor flute)
-ff,Fortissimo
-fff,Fortississimo
-fgh,Flugelhorn
-fl,Flute
-fp,Fortepiano
-gliss,Glissando (“gliding, sliding”)
-hn,Horn
-m,Measure
-mm,Measures
-MM,Metronome tempo
-mf,Mezzo-Forte
-mp,Mezzo-Piano
-mvt,Movement
-ob,Oboe
-oda,Oboe d’amore
-orch,Orchestra
-p,Piano
-p,Page,
-pan,Pan flute
-pic,Piccolo
-picc,Piccolo
-pizz,Pizzicato (“plucking”)
-pp,Pianissio
-pp,Pages
-ppp,Pianississimo
-rall,Rallentando (“gradual slowing”)
-rec,Recorder
-rit,Ritardando (“slowing down”)
-Rf,Rinforzando (“with sudden force”)
-Rfz,Rinforzando (“with sudden force”)
-rpm,Revolutions per minute
-sax,Saxophone
-sf,Sforzando, Sforzato (“sudden accent”)
-sfz,Sforzando, Sforzato (“sudden accent”)
-sfp,Sforzando followed by Piano
-smorz,Smorzando (“dying away”)
-sord,Sordino (“muted”)
-sost. ped,Sostenuto pedal (“sustained pedal”)
-spicc,Spiccato (“bounce bow on a stringed instrument”)
-stacc,Staccato (“playing each note separately from the others”)
-stpt,Slide trumpet
-sul pont,Sul Ponticello (“playing with the bow near the bridge”)
-tba,Tuba
-tbn,Trombone
-tpt,Trumpet
-tr,Trill
-trem,Tremolo (“trembling, wavering”)
-tsx,Tenor saxophone
-vib,Vibrato (“pulsing, vibrating”)
-vol,Volume
-ww,Woodwinds
--- a/Data/Abbr/Organizations.csv
+++ b/Data/Abbr/Organizations.csv
@ -1,2 +0,0 @@
-Abbreviation,Definition
-ISO,International Organization for Standardization
--- a/Data/Abbr/Various.csv
+++ b/Data/Abbr/Various.csv
--- a/Data/Checklists/handwashing.txt
+++ b/Data/Checklists/handwashing.txt
@ -1,6 +0,0 @@
-HEAD Handwashing
-Wet your hands with clean, running water (warm or cold), turn off the tap, and apply soap.
-Lather your hands by rubbing them together with the soap. Lather the backs of your hands, between your fingers, and under your nails.
-Scrub your hands for at least 20 seconds.
-Rinse your hands well under clean, running water.
-Dry your hands using a clean towel or air dry them.
--- a/Data/TIOBE-index.csv
+++ b/Data/TIOBE-index.csv
@ -1,21 +0,0 @@
-Language, Popularity, Change
-C, 12.54, -4.65
-Python, 11.84, +3.48
-Java, 11.54, -4.56
-C++, 7.36, +1.41
-C#, 4.33, -0.40
-Visual Basic, 4.01, -0.68
-JavaScript, 2.33, +0.06
-PHP, 2.21, -0.05
-Assembly language, 2.05, +1.09
-SQL, 1.88, +0.15
-Classic Visual Basic, 1.72, +1.07
-Groovy, 1.29, +0.87
-Ruby, 1.23, +0.25
-R, 1.20, -0.99
-Perl, 1.18, +0.36
-Swift, 1.10, -0.35
-Fortran, 1.07, +0.80
-Delphi/Object Pascal, 1.06, +0.47
-MATLAB, 1.05, +0.15
-Go, 0.95, -0.06
--- a/Data/Templates/serenade.txt
+++ b/Data/Templates/serenade.txt
@ -1 +0,0 @@
-/* Exported by export-scripts2serenade.ps1 */
--- a/Data/domain-names.csv
+++ b/Data/domain-names.csv
@ -1,148 +0,0 @@
-Domain
-accounts.google.com
-activity.windows.com
-airbnb.com
-airbnb.de
-aka.ms
-alternate.de
-api.dropboxapi.com
-api.met.no
-api1.origin.com
-arc.msn.com
-arte.tv
-assets.msn.com
-amazon.com
-amazon.de
-amazon.fr
-banking.ing-diba.de
-bing.com
-bing.de
-bing.fr
-blitzortung.org
-bolt.dropbox.com
-catalog.gamepass.com
-changelogs.ubuntu.com
-client.dropbox.com
-client.wns.windows.com
-clients1.google.com
-clients2.google.com
-clients3.google.com
-clients4.google.com
-contacts.google.com
-d.dropbox.com
-dasoertliche.de
-dealer.spotify.com
-deepl.com
-dell.com
-discord.com
-discordapp.com
-dhl.de
-download.windowsupdate.com
-dropbox.com
-earth.google.com
-ebay.com
-ebay.de
-ebay.fr
-ebook3000.com
-facebook.com
-facebook.de
-facebook.fr
-flightradar24.com
-fonts.google.com
-fonts.googleapis.com
-fonts.gstatic.com
-github.com
-github.map.fastly.net
-gmail.com
-golem.de
-google.com
-google.de
-google.fr
-googleapis.com
-gstatic.com
-heise.de
-holidaycheck.de
-hornbach.de
-i.ytimg.com
-IEEE.org
-ibm.com
-icons8.com
-imap.googlemail.com
-install.robertsspaceindustries.com
-ipfs.io
-ipv6.msftconnecttest.com
-launcher2.robertsspaceindustries.com
-licensing.mp.microsoft.com
-live.github.com
-live.thunderbird.net
-livepatch.canonical.com
-login.live.com
-longfiles.com
-mail.google.com
-map.blitzortung.org
-maps.google.com
-maps.google.de
-maps.google.fr
-microsoft.com
-mozilla.org
-mtalk.google.com
-music.google.com
-netflix.com
-news.google.com
-news.google.de
-news.google.fr
-news.url.google.com
-ogs.google.com
-opera.com
-photos.google.com
-pixabay.com
-play.google.com
-plex.tv
-presence.teams.microsoft.com
-ptbtime1.ptb.de
-ptbtime2.ptb.de
-ptbtime3.ptb.de
-redbull.tv
-redhat.com
-reichelt.de
-robertsspaceindustries.com
-schneier.com
-secure.download.dm.origin.com
-semonkeys.net
-settings.data.microsoft.com
-settings-win.data.microsoft.com
-sites.google.com
-slashdot.com
-speedtest.net
-ssl.gstatic.com
-stackoverflow.com
-start.thunderbird.net
-static.focus.de
-static.nvidiagrid.net
-storage.googleapis.com
-substrate.office.com
-t-online.de
-t0.gstatic.com
-teams.microsoft.com
-techstage.de
-telemetry.dropbox.com
-tile-service.weather.microsoft.com
-time.windows.com
-toggl.com
-toom.de
-track.toggl.com
-translate.google.de
-twitter.com
-twitter.de
-ubuntu.com
-update.googleapis.com
-wetter.com
-wired.com
-wttr.in
-www.google.com
-www.googleapis.com
-www.gstatic.com
-www.netflix.com
-www.youtube.com
-youtube.com
-youtube.de
--- a/Data/git-repos.csv
+++ b/Data/git-repos.csv
@ -1,26 +0,0 @@
-Category,FolderName,Branch,Shallow,URL
-Dev,	 base256unicode,master,  no,	"https://github.com/fleschutz/base256unicode"
-Dev,	 bazel,		master,	 yes,	"https://github.com/bazelbuild/bazel"
-Dev,	 cmake,		master,	 yes,	"https://github.com/Kitware/CMake"
-Fun,	 cmatrix,	master,	 yes,	"https://github.com/abishekvashok/cmatrix"
-Tool,	 cmark,		master,	 yes,	"https://github.com/commonmark/cmark"
-Dev,	 CWTS,		master,  no,	"https://github.com/fleschutz/CWTS"
-Tool,	 elasticsearch,	master,  yes,	"https://github.com/elastic/elasticsearch"
-Tool,	 go-ipfs,	master,	 yes,	"https://github.com/ipfs/go-ipfs"
-Tool,	 grafana,	main,	 yes,	"https://github.com/grafana/grafana"
-Tool,	 leon,          master,  yes,   "https://github.com/leon-ai/leon"
-Dev,	 llvm,		master,  yes,	"https://github.com/llvm/llvm-project"
-Math,	 LSS,		master,	 yes,	"https://github.com/fleschutz/LSS"
-Dev,	 ninja,		master,  yes,	"git://github.com/ninja-build/ninja.git"
-Libs,	 opencv,	master,  yes,	"https://github.com/opencv/opencv"
-Tool,	 OSMA,		master,  no,	"https://github.com/fleschutz/OSMA"
-Shell,	 PowerShell,	master,  no,	"https://github.com/fleschutz/PowerShell"
-Shell,	 pwsh,		master,  yes,	"https://github.com/PowerShell/PowerShell"
-Dev,	 protobuf,	master,	 yes,	"https://github.com/protocolbuffers/protobuf"
-Dev,	 rust,		master,  yes,	"https://github.com/rust-lang/rust"
-Tool,	 smartmontools,	master,  yes,	"https://github.com/smartmontools/smartmontools"
-Tool,	 tensorflow,	master,  yes,	"https://github.com/tensorflow/tensorflow"
-Tool,	 terminal,	main,    yes,	"https://github.com/microsoft/terminal"
-Dev,	 tinycc,	mob,     yes,	"https://github.com/TinyCC/tinycc"
-Tool,	 voice2json,	master,  yes,	"https://github.com/synesthesiam/voice2json"
-Tool,	 zfs,		master,  yes,	"https://github.com/openzfs/zfs"
--- a/Data/jokes.csv
+++ b/Data/jokes.csv
@ -1,69 +0,0 @@
-Joke
-"Chuck Norris doesnt read books. He stares them down until he gets the information he wants."
-"Time waits for no man. Unless that man is Chuck Norris."
-"If you spell Chuck Norris in Scrabble, you win. Forever."
-"Chuck Norris breathes air five times a day."
-"In the Beginning there was nothing then Chuck Norris roundhouse kicked nothing and told it to get a job."
-"Chuck Norris has a mug of nails instead of coffee in the morning."
-"If Chuck Norris were to travel to an alternate dimension in which there was another Chuck Norris and they both fought, they would both win."
-"The dinosaurs looked at Chuck Norris the wrong way once. You know what happened to them."
-"Chuck Norris tears cure cancer. Too bad he has never cried."
-"Chuck Norris once roundhouse kicked someone so hard that his foot broke the speed of light"
-"Since 1940, the year Chuck Norris was born, roundhouse kick related deaths have increased 13,000 percent."
-"Chuck Norris does not own a stove, oven, or microwave , because revenge is a dish best served cold."
-"Chuck Norris does not sleep. He waits."
-"There is no chin behind Chuck Norris beard. There is only another fist."
-"The chief export of Chuck Norris is pain."
-"Chuck Norris recently had the idea to sell his pee as a canned beverage. Its now called Red Bull."
-"If paper beats rock, rock beats scissors, and scissors beats paper, what beats all 3 at the same time? Chuck Norris."
-"On the 7th day, God rested  Chuck Norris took over."
-"Chuck Norris can dribble a bowling ball."
-"Chuck Norris drinks napalm to fight his heartburn."
-"Chuck Norris roundhouse kick is so powerful, it can be seen from outer space by the naked eye."
-"If you want a list of Chuck Norris enemies, just check the extinct species list."
-"Chuck Norris has never blinked in his entire life. Never."
-"Chuck Norris does not use spell check. If he happens to misspell a word, Oxford will change the spelling."
-"Some kids pee their name in the snow. Chuck Norris can pee his name into concrete."
-"Chuck Norris counted to infinity twice."
-"Chuck Norris can speak Braille."
-"Chuck Norris can have both feet on the ground and kick butt at the same time."
-"Chuck Norris can do a wheelie on a unicycle."
-"Chuck Norris stands faster than anyone can run."
-"Once a cobra bit Chuck Norris leg. After five days of excruciating pain, the cobra died."
-"Chuck Norris once won a game of Connect Four in three moves."
-"Champions are the breakfast of Chuck Norris."
-"When the Boogeyman goes to sleep every night he checks his closet for Chuck Norris."
-"Chuck Norris can slam revolving doors."
-"Chuck Norris does not hunt because the word hunting implies the possibility of failure. Chuck Norris goes killing."
-"The dark is afraid of Chuck Norris."
-"Chuck Norris makes onions cry."
-"Death once had a near-Chuck-Norris experience."
-"When Chuck Norris writes, he makes paper bleed."
-"Chuck Norris can strangle you with a cordless phone."
-"Chuck Norris never retreats; He just attacks in the opposite direction."
-"Chuck Norris can build a snowman out of rain."
-"Chuck Norris can drown a fish."
-"When Chuck Norris enters a room, he doesnt turn the lights on, he turns the dark off."
-"The only time Chuck Norris was ever wrong was when he thought he had made a mistake."
-"Chuck Norris is the only person that can punch a cyclops between the eye."
-"Chuck Norris used to beat up his shadow because it was following to close. It now stands 15 feet behind him."
-"Outer space exists because its afraid to be on the same planet with Chuck Norris."
-"When Chuck Norris does a pushup, he's pushing the Earth down."
-"Chuck Norris doesnt wear a watch. He decides what time it is."
-"Chuck Norris does not get frostbite. Chuck Norris bites frost."
-"Chuck Norris spices up his steaks with pepper spray."
-"The Great Wall of China was originally created to keep Chuck Norris out. It didn't work."
-"Chuck Norris can get in a bucket and lift it up with himself in it."
-"Chuck Norris doesn't shower, he only takes blood baths."
-"Chuck Norris can divide by zero."
-"Chuck Norris once kicked a horse in the chin. Its descendants are now known as giraffes."
-"When Chuck Norris does division, there are no remainders."
-"It takes Chuck Norris 20 minutes to watch '60 Minutes'."
-"Chuck Norris once went skydiving, but promised never to do it again. One Grand Canyon is enough."
-"We live in an expanding universe. All of it is trying to get away from Chuck Norris."
-"Chuck Norris beat the sun in a staring contest."
-"Chuck Norris can clap with one hand."
-"Chuck Norris doesn't need to shave. His beard is scared to grow."
-"Chuck Norris invented airplanes because he was tired of being the only person that could fly."
-"Freddy Krueger has nightmares about Chuck Norris."
-"Chuck Norris can start a fire with an ice cube."
--- a/Data/matrix.csv
+++ b/Data/matrix.csv
@ -1,29 +0,0 @@
-A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z
-" ","P"," "," "," "," ","H"," "," "," ","R"," "," "," "," "," "," "," ","B"," "," "," "," "," ","M"
-" ","O"," "," "," "," ","A"," "," "," ","E"," "," "," "," "," "," "," ","L"," "," "," "," "," ","A"
-" ","W"," "," "," "," ","V"," "," "," ","D"," "," "," "," "," "," "," ","U"," "," "," "," "," ","T"
-" ","E"," "," "," "," ","E"," "," "," "," "," "," "," "," "," "," "," ","E"," "," "," "," "," ","R"
-" ","R"," "," "," "," "," "," "," "," ","P"," "," "," "," "," "," "," "," "," "," "," "," "," ","I"
-" ","S"," "," "," "," ","F"," "," "," ","I"," "," "," "," "," "," "," ","P"," "," "," "," "," ","X"
-" ","H"," "," "," "," ","U"," "," "," ","L"," "," "," "," "," "," "," ","I"," "," "," "," "," "," "
-" ","E"," "," "," "," ","N"," "," "," ","L"," "," "," "," "," "," "," ","L"," "," "," "," "," "," "
-" ","L"," "," "," "," "," "," "," "," ","?"," "," "," "," "," "," "," ","L"," "," "," "," "," "," "
-" ","L"," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," ","?"," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" ","R"," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" ","U"," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" ","L"," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" ","E"," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" ","S"," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
-" "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "," "
--- a/Data/quotes.csv
+++ b/Data/quotes.csv
@ -1,32 +0,0 @@
-Genre,Author,Quote
-IQ,Thomas Edison,"Genius is one percent inspiration and ninety-nine percent perspiration."
-Misc,Johann Wolfgang von Goethe,"Difficulties increase the nearer we get to the goal."
-Misc,William Shakespeare,"Having nothing, nothing can he lose."
-Misc,Albert Einstein,"Learn from yesterday, live for today, hope for tomorrow."
-Misc,Michelangelo,"Faith in oneself is the best and safest course."
-Misc,Sophocles,"It takes both sunshine and rain to make a rainbow."
-Misc,Mahatma Gandhi,"We must become the change we want to see."
-Misc,Johann Wolfgang von Goethe,"Knowing is not enough; we must apply!"
-Misc,Immanuel Kant,"Science is organized knowledge. Wisdom is organized life."
-Misc,Indira Gandhi,"You can't shake hands with a clenched fist."
-Misc,Albert Einstein,"Try not to become a man of success, but rather try to become a man of value."
-Misc,Pierre Auguste Renoir,"The pain passes, but the beauty remains."
-Misc,Heraclitus,"All is flux; nothing stays still."
-Misc,Japanese proverb,"The day you decide to do it is your lucky day."
-Misc,Abraham Lincoln,"The best thing about the future is that it only comes one day at a time."
-Misc,Epictetus,"We have two ears and one mouth so that we can listen twice as much as we speak."
-Misc,Cervantes,"Be slow of tongue and quick of eye."
-Misc,Bruce Lee,"Mistakes are always forgivable, if one has the courage to admit them."
-Misc,Nelson Mandela,"The greatest glory in living lies not in never falling, but in rising every time we fall."
-Misc,Walt Disney,"The way to get started is to quit talking and begin doing."
-Misc,John Lennon,"Life is what happens when you're busy making other plans"
-Misc,Mother Teresa,"Spread love everywhere you go. Let no one ever come to you without leaving happier."
-Misc,Benjamin Franklin,"Tell me and I forget. Teach me and I remember. Involve me and I learn."
-Misc,Aristotle,"It is during our darkest moments that we must focus to see the light."
-Misc,Anne Frank,"Whoever is happy will make others happy too."
-Misc,Helen Keller,"Life is either a daring adventure or nothing at all."
-Misc,Abraham Lincoln,"In the end, it's not the years in your life that count. It's the life in your years."
-Misc,Albert Einstein,"Only a life lived for others is a life worthwhile."
-Misc,Mae West,"You only live once, but if you do it right, once is enough."
-Misc,Jonathan Swift,"May you live all the days of your life."
-Misc,Hans Christian Andersen,"Life itself is the most wonderful fairy tale."
--- a/Data/scripts.csv
+++ b/Data/scripts.csv
@ -1,293 +0,0 @@
-Script,Description
-add-firewall-rules.ps1, Adds firewall rules to the given executables (needs admin rights)
-add-memo.ps1, Adds the given memo text to $HOME/Memos.csv
-build-repo.ps1, Builds a Git repository 
-build-repos.ps1, Builds all Git repositories in a folder
-cd-autostart.ps1, Set the working directory to the user's autostart folder
-cd-desktop.ps1, Set the working directory to the user's desktop folder
-cd-docs.ps1, Set the working directory to the user's documents folder
-cd-downloads.ps1, Set the working directory to the user's downloads folder
-cd-dropbox.ps1, Set the working directory to the user's Dropbox folder
-cd-home.ps1, Set the working directory to the user's home folder
-cd-music.ps1, Set the working directory to the user's music folder
-cd-onedrive.ps1, Set the working directory to the user's OneDrive folder
-cd-pics.ps1, Set the working directory to the user's pictures folder
-cd-recycle-bin.ps1, Set the working directory to the user's recycle bin folder
-cd-repos.ps1, Set the working directory to the user's Git repositories folder
-cd-root.ps1, Set the working directory to the root directory (C: on Windows)
-cd-scripts.ps1, Set the working directory to the PowerShell Scripts folder
-cd-ssh.ps1, Set the working directory to the user's SSH folder
-cd-up.ps1, Set the working directory to one directory level up
-cd-up2.ps1, Set the working directory to two directory levels up
-cd-up3.ps1, Set the working directory to three directory levels up
-cd-up4.ps1, Set the working directory to four directory levels up
-cd-videos.ps1, Set the working directory to the user's videos folder
-check-cpu-temp.ps1, Checks the CPU temperature
-check-dns-resolution.ps1, Checks the DNS resolution with frequently used domain names
-check-drive-space.ps1, Checks a drive for free space left
-check-file-system.ps1, Checks the file system of a drive (needs admin rights)
-check-health.ps1, Checks the system health
-check-ipv4-address.ps1, Checks the given IPv4 address for validity
-check-ipv6-address.ps1, Checks the given IPv6 address for validity
-check-mac-address.ps1, Checks the given MAC address for validity
-check-ping.ps1, Checks the ping latency to the internet
-check-subnet-mask.ps1, Checks the given subnet mask for validity
-check-swap-space.ps1, Checks the swap space for free space left
-check-symlinks.ps1, Checks every symlink in a directory tree
-check-weather.ps1, Checks the current weather for critical values
-check-windows-system-files.ps1, Checks the validity of the Windows system files 
-check-xml-file.ps1, Checks the given XML file for validity
-clean-repo.ps1, Cleans the current/given Git repository from untracked files (including submodules)
-clean-repos.ps1, Cleans all Git repositories under the current/given directory from untracked files (including submodules)
-clear-recycle-bin.ps1, Removes the content of the recycle bin folder (can not be undo!)
-clone-repos.ps1, Clones well-known Git repositories
-close-calculator.ps1, Closes the calculator program gracefully
-close-cortana.ps1, Closes Cortana gracefully
-close-file-explorer.ps1, Closes Microsoft File Explorer gracefully
-close-google-chrome.ps1, Closes the Google Chrome Web browser
-close-program.ps1, Closes the given program gracefully
-close-microsoft-edge.ps1, Closes the Microsoft Edge Web browser
-close-microsoft-store.ps1, Closes the Microsoft Store app
-close-mozilla-firefox.ps1, Closes the Mozilla Firefox Web browser 
-close-netflix.ps1, Closes the Netflix application gracefully
-close-onedrive.ps1, Closes Microsoft OneDrive gracefully
-close-serenade.ps1, Closes the Serenade.ai application gracefully
-close-snipping-tool.ps1, Closes the Snipping Tool application gracefully
-close-spotify.ps1, Closes Spotify
-close-system-settings.ps1, Closes the System Settings gracefully
-close-thunderbird.ps1, Closes Mozilla Thunderbird gracefully
-close-vlc.ps1, Closes the VLC media player application
-close-windows-terminal.ps1, Closes the Windows Terminal application
-copy-photos-sorted.ps1, Copy image files sorted by year and month 
-configure-git.ps1, Sets up the Git user configuration
-convert-csv2txt.ps1, Converts the given CSV file into a text list
-convert-mysql2csv.ps1, Converts the MySQL database table to a CSV file
-convert-ps2bat.ps1, Converts PowerShell script(s) to .bat files
-convert-ps2md.ps1, Converts the comment-based help of a PowerShell script to Markdown
-convert-sql2csv.ps1, Converts the SQL database table to a CSV file
-convert-txt2wav.ps1, Converts text into a audio .WAV file
-daily-tasks.sh, Execute PowerShell scripts automatically as daily tasks (Linux only)
-decrypt-file.ps1, Decrypts the given file
-display-time.ps1, Displays the current time for 10 seconds by default
-download-dir.ps1, Downloads a directory tree from the given URL
-download-file.ps1, Downloads a file from the given URL
-edit.ps1, Edits the given file with the built-in text editor
-enable-crash-dumps.ps1, Enables the writing of crash dumps
-enable-god-mode.ps1, Enables the god mode (adds a new icon to the desktop)
-encrypt-file.ps1, Encrypts the given file
-export-to-manuals.ps1, Converts all scripts as manuals                                    
-export-to-serenade.ps1, Converts all scripts to Serenade for voice control
-fetch-repo.ps1, Fetches updates for the current/given Git repository (including submodules)
-fetch-repos.ps1, Fetches updates for all Git repositories under the current/given directory (including submodules)
-get-md5.ps1, Prints the MD5 checksum of the given file
-get-sha1.ps1, Prints the SHA1 checksum of the given file
-get-sha256.ps1, Prints the SHA256 checksum of the given file
-hibernate.ps1, Enables hibernate mode for the local computer (needs admin rights)
-inspect-exe.ps1, Prints basic information of the given executable file
-install-github-cli.ps1, Installs GitHub CLI
-install-google-chrome.ps1, Installs the Google Chrome browser
-install-knot-resolver.ps1, Installs the Knot Resolver (needs admin rights)
-install-signal-cli.ps1, Installs signal-cli from github.com/AsamK/signal-cli
-install-ssh-client.ps1, Installs the SSH client (needs admin rights)
-install-ssh-server.ps1, Installs the SSH server (needs admin rights)
-install-updates.ps1, Installs updates (needs admin rights)
-install-vscode.ps1, Installs Visual Studio Code 
-install-wsl.ps1, Installs Windows Subsystem for Linux (WSL), needs admin rights
-introduce-powershell.ps1, Introduces PowerShell to new users
-list-aliases.ps1, Lists all PowerShell aliases 
-list-anagrams.ps1, Lists all anagrams of the given word
-list-automatic-variables.ps1, Lists the automatic variables of PowerShell 
-list-branches.ps1, Lists all branches in the current/given Git repository 
-list-cheat-sheet.ps1, Lists the PowerShell cheat sheet
-list-city-weather.ps1, Lists the current weather of cities worldwide (east to west)
-list-commits.ps1, Lists all commits in the current/given Git repository 
-list-console-colors.ps1, Lists all console colors
-list-countries.ps1, Lists details of all countries
-list-cli-tools.ps1, Lists available command-line interface (CLI) tools 
-list-clipboard.ps1, Lists the contents of the clipboard
-list-credits.ps1, Shows the credits
-list-crypto-rates.ps1, Lists the current crypto exchange rates 
-list-dir-tree.ps1, Lists the directory tree content 
-list-drives.ps1, Lists all drives
-list-environment-variables.ps1, Lists all environment variables
-list-emojis.ps1, Lists the emojis of Unicode 13.0
-list-empty-dirs.ps1, Lists empty subfolders within the given directory tree
-list-empty-files.ps1, Lists empty files within the given directory tree
-list-files.ps1, Lists all files in the given folder and also in every subfolder
-list-folder.ps1, Lists the folder content 
-list-fritzbox-calls.ps1, Lists the FRITZ!Box calls
-list-fritzbox-devices.ps1, Lists FRITZ!Box's known devices 
-list-hidden-files.ps1, Lists hidden files within the given directory tree
-list-installed-apps.ps1, Lists the installed Windows Store apps
-list-installed-software.ps1, Lists the installed software (except Windows Store apps)
-list-latest-tag.ps1, Lists the latest tag on the current branch in a Git repository
-list-latest-tags.ps1, Lists the latests tags in all Git repositories under the current/given directory 
-list-memos.ps1, Lists the memos at $HOME/Memos.csv
-list-unused-files.ps1, Lists unused files in a directory tree
-list-cmdlets.ps1, Lists the PowerShell cmdlets
-list-earthquakes.ps1, Lists earthquakes with magnitude >= 6.0 for the last 30 days
-list-exchange-rates.ps1, Lists the exchange rates for the given currency 
-list-modules.ps1, Lists the PowerShell modules
-list-mysql-tables.ps1, Lists the MySQL server tables
-list-network-shares.ps1, Lists the network shares of the local computer
-list-news.ps1, Lists the latest news
-list-os-releases.ps1, Lists operating system releases and download URL 
-list-os-updates.ps1, Lists operating system updates
-list-passwords.ps1, Prints a list of random passwords
-list-pins.ps1, Prints a list of random PIN's
-list-printers.ps1, Lists all printer known to the computer
-list-print-jobs.ps1, Lists all jobs of all printers
-list-processes.ps1, Lists the local computer processes
-list-profiles.ps1, Lists your PowerShell profiles
-list-recycle-bin.ps1, Lists the content of the recycle bin folder
-list-scripts.ps1, Lists all PowerShell scripts in this repository
-list-services.ps1, Lists the services on the local computer
-list-sql-tables.ps1, Lists the SQL server tables
-list-submodules.ps1, Lists the submodules of the current/given Git repository
-list-system-info.ps1, Lists system information on the local computer
-list-tags.ps1, Lists all tags in the current/given Git repository 
-list-tasks.ps1, Lists all Windows scheduler tasks
-list-timezone.ps1, Lists the current time zone details
-list-timezones.ps1, Lists all time zones available 
-list-tiobe-index.ps1, Lists the TIOBE index of top programming languages
-list-user-groups.ps1, Lists the user groups on the local computer
-list-voices.ps1, Lists the installed text-to-speech (TTS) voices
-list-weather.ps1, Lists the hourly weather 
-list-workdir.ps1, Lists the current working directory
-locate-city.ps1, Prints the geographic location of the given city
-locate-ipaddress.ps1, Prints the geographic location of the given IP address
-locate-zip-code.ps1, Prints the geographic location of the given zip-code
-make-install.ps1, Installs built executables and libs to the installation directory
-moon.ps1, Prints the current moon phase
-mute-audio.ps1, Mutes the audio device
-open-amazon.ps1, Opens Amazon's website
-open-browser.ps1, Starts the default Web browser
-open-calculator.ps1, Starts the calculator program
-open-c-drive.ps1, Opens the C: drive folder
-open-downloads-folder.ps1, Opens the user's downloads folder
-open-dropbox-folder.ps1, Opens the user's Dropbox folder
-open-email-client.ps1, Starts the default email client
-open-facebook.ps1, Opens Facebook's website
-open-file-explorer.ps1, Opens the File Explorer
-open-fritz-box.ps1, Opens FRITZ!Box's web interface
-open-github.ps1, Opens GitHub's website
-open-google-contacts.ps1, Opens Google Contacts
-open-google-earth.ps1, Opens Google Earth
-open-google-maps.ps1, Opens Google Maps
-open-google-mail.ps1, Opens Google Mail
-open-google-news.ps1, Opens Google News
-open-google-play.ps1, Opens Google Play
-open-google-search.ps1, Opens Google Search
-open-google-translate.ps1, Opens Google Translate
-open-home-folder.ps1, Opens the user's home folder
-open-music-folder.ps1, Opens the user's music folder
-open-microsoft-edge.ps1, Launches the Microsoft Edge Web browser
-open-microsoft-store.ps1, Starts the Microsoft Store app
-open-netflix.ps1, Starts the Netflix app
-open-notepad.ps1, Starts the Notepad app
-open-onedrive-folder.ps1, Opens the user's OneDrive folder 
-open-recycle-bin.ps1, Opens the user's recycle bin folder
-open-repos-folder.ps1, Opens the user's Git repositories folder
-open-snipping-tools.ps1, Opens the Snipping Tool
-open-speed-test.ps1, Opens Cloudflare's speed test
-open-spotify.ps1, Opens the Spotify app
-open-system-settings.ps1, Launches the Windows system settings 
-open-task-manager.ps1, Launches the Task Manager
-open-toggl-track.ps1, Opens Toggl Track
-open-videos-folder.ps1, Opens the user's videos folder
-open-windows-terminal.ps1, Launches Windows Terminal
-open-wikipedia.ps1, Opens Wikipedia's website
-open-youtube.ps1, Opens YouTube.com
-pick-commit.ps1, Cherry-picks a Git commit into multiple branches
-play-beep-sound.ps1, Plays a short beep sound
-play-files.ps1, Plays the given audio files
-play-happy-birthday.ps1, Plays the Happy Birthday song
-play-imperial-march.ps1, Plays the Imperial March (Star Wars)
-play-jingle-bells.ps1, Plays Jingle Bells
-play-mission-impossible.ps1, Plays the Mission Impossible theme
-play-m3u.ps1, Plays the given playlist (M3U file format)
-play-mp3.ps1, Plays the given sound file (MP3 file format)
-play-super-mario.ps1, Plays the Super Mario Intro
-play-tetris-melody.ps1, Plays the Tetris melody
-poweroff.ps1, Halts the local computer (needs admin rights)
-publish-to-ipfs.ps1, Publishes the given files or directory to IPFS
-pull-repo.ps1, Pulls updates for the current/given Git repository (including submodules)
-pull-repos.ps1, Pulls updates for all Git repositories under the current/given directory (including submodules)
-query-smart-data.ps1, Queries the S.M.A.R.T. data of your HDD/SSD's and saves it to the current/given directory
-new-branch.ps1, Creates a new branch in the current/given Git repository 
-new-email.ps1, Starts the default email client to write a new email
-new-qrcode.ps1, Generates a new QR code
-new-script.ps1, Creates a new PowerShell script
-new-shortcut.ps1, Creates a new shortcut file
-new-symlink.ps1, Creates a new symbolic link file
-new-tag.ps1, Creates a new tag in a Git repository 
-new-zipfile.ps1, Creates a new .zip file from a directory
-reboot.ps1, Reboots the local computer (needs admin rights)
-reboot-fritzbox.ps1, Reboots the FRITZ!box device
-remind-me.ps1, Creates a scheduled task that will display a popup message
-remove-empty-dirs.ps1, Removes empty subfolders within the given directory tree
-remove-print-jobs.ps1, Removes all jobs from all printers
-remove-tag.ps1, Removes a tag in a Git repository 
-replace-in-files.ps1, Search and replace a pattern in the given files by the replacement
-restart-network-adapters.ps1, Restarts all local network adapters
-save-screenshot.ps1, Saves a single screenshot
-say-date.ps1, Say the current date by text-to-speech
-say-joke.ps1, Say a random Chuck Norris joke by text-to-speech
-say-quote.ps1, Say a random quote by text-to-speech
-say-time.ps1, Say the current time by text-to-speech
-search-filename.ps1, Searches the directory tree for filenames by given pattern 
-search-files.ps1, Searches the given pattern in the given files
-scan-ports.ps1, Scans the network for open/closed ports
-send-email.ps1, Sends an email message
-send-tcp.ps1, Sends a TCP message to the given IP address and port
-send-udp.ps1, Sends a UDP datagram message to the given IP address and port
-set-profile.ps1, Updates your PowerShell user profile
-set-timer.ps1, Sets a timer for a countdown
-set-wallpaper.ps1, Sets the given image as wallpaper
-simulate-matrix.ps1, Simulates the Matrix (fun)
-simulate-presence.ps1, Simulates the human presence against burglars
-speak-checklist.ps1, Speaks the given checklist by text-to-speech
-speak-countdown.ps1, Starts a countdown by text-to-speech
-speak-english.ps1, Speaks the given text with an English text-to-speech voice
-speak-epub.ps1, Speaks the content of the given Epub file by text-to-speech
-speak-file.ps1, Speaks the content of the given text file by text-to-speech
-speak-french.ps1, Speaks the given text with a French text-to-speech voice
-speak-german.ps1, Speaks the given text with a German text-to-speech voice
-speak-italian.ps1, Speaks the given text with an Italian text-to-speech voice
-speak-spanish.ps1, Speaks the given text with a Spanish text-to-speech voice
-speak-test.ps1, Performs a speak test by text-to-speech 
-speak-text.ps1, Speaks the given text by text-to-speech
-start-calibre-server.ps1, Starts a local Calibre server 
-start-ipfs-server.ps1, Starts a local IPFS server
-switch-branch.ps1, Switches the branch in the current/given Git repository (including submodules)
-switch-shelly1.ps1, Switches a Shelly1 device in the local network
-sync-repo.ps1, Synchronizes a Git repository by push & pull (including submodules)
-translate-file.ps1, Translates the given text file into another language
-translate-files.ps1, Translates the given text files into any supported language
-translate-text.ps1, Translates the given text into other languages
-turn-volume-up.ps1, Turns the audio volume up (+10% by default)
-turn-volume-down.ps1, Turns the audio volume down (-10% by default)
-unmute-audio.ps1, Unmutes audio
-upgrade-ubuntu.ps1, Upgrades Ubuntu Linux to the latest (LTS) release 
-upload-file.ps1, Uploads the local file to the given FTP server
-wakeup.ps1, Sends a magic packet to the given computer, waking him up
-weather.ps1, Prints the current weather forecast
-weather-report.ps1, Prints the local weather report
-what-is.ps1, Prints a description of the given abbreviation
-write-animated.ps1, Writes animated text
-write-big.ps1, Writes the given text in big letters
-write-blue.ps1, Writes the given text in a blue foreground color
-write-braille.ps1, Writes the given text in Braille
-write-calendar.ps1, Writes the calendar (month or year)
-write-green.ps1, Writes the given text in a green foreground color
-write-joke.ps1], Writes a random Juck Norris joke
-write-lowercase.ps1, Writes the given text in lowercase letters
-write-marquee.ps1, Writes the given text as marquee
-write-morse-code.ps1, Writes the given text in Morse code
-write-motd.ps1, Writes the message of the day (MOTD)
-write-quote.ps1, Writes a random quote
-write-red.ps1, Writes the given text in a red foreground color
-write-rot13.ps1, Encodes or decodes the given text with ROT13
-write-typewriter.ps1, Writes the given text with the typewriter effect
-write-uppercase.ps1, Writes the given text in uppercase letters
-write-vertical.ps1, Writes the given text in vertical direction
--- a/Data/template.ps1
+++ b/Data/template.ps1
@ -1,33 +0,0 @@
-<#
-.SYNOPSIS
-	← enter overview of script here
-.DESCRIPTION
-	← enter brief description of script here
-.INPUTS
-	← enter inputs here (if any, otherwise state None)
-.OUTPUTS
-	← enter outputs here (if any, otherwise state None)
-.EXAMPLE
-	PS> .\template.ps1 ← enter example here (repeat this attribute for more than one example)
-.NOTES
-	Author:        ← enter full name here
-	License:       ← enter license here
-.LINK
-	← enter URL here
-#>
-
-#requires -version 4
-
-param() # ← enter script parameters here
-
-#	← enter functions here 
-
-try {
-#	← enter instructions here 
-
-	"✔️ Done."
-	exit 0
-} catch {
-	write-error "⚠️ Error in line $($_.InvocationInfo.ScriptLineNumber): $($Error[0])"
-	exit 1
-}
--- a/Docs/FAQ.md
+++ b/Docs/FAQ.md
@ -1,104 +0,0 @@
-PowerShell FAQ
-==============
-
-What is PowerShell?
-------------------
-PowerShell is a task automation and configuration management framework from Microsoft, consisting of a command-line shell and associated scripting language. 
-
-Why use PowerShell?
-------------------
-✔️ it's **powerful**: fully control your computer
-
-✔️ it's **cross-platform**: available for Linux, Mac OS and Windows
-
-✔️ it's **open-source and free**: see the Github repository at https://github.com/PowerShell/PowerShell 
-
-✔️ it's **easy to learn**: see the tutorial for beginners at https://www.guru99.com/powershell-tutorial.html
-
-✔️ it's **fully documented**: see the PowerShell documentation at https://docs.microsoft.com/en-us/powershell/
-
-How to get PowerShell?
----------------------
-* **Windows 7 and newer** provides PowerShell by default. However, script execution is **disallowed by default** (execution policy is "restricted"). To enable this, enter as administrator:
-   ```
-   PS> Set-ExecutionPolicy RemoteSigned
-   ```
-* **On CentOS, Debian, Docker, Fedora, macOS, openSUSE, Red Hat, Ubuntu** visit https://github.com/PowerShell/PowerShell for installation.
-* **On Linux supporting Snaps** install PowerShell by executing:
-   ```
-   $ snap install PowerShell
-   $ ln -s /snap/bin/pwsh /usr/bin/pwsh
-   ```
-
-How to get the PowerShell Scripts?
----------------------------------
-* Git users execute: `$ git clone https://github.com/fleschutz/PowerShell`
-* otherwise download and unzip: https://github.com/fleschutz/PowerShell/archive/master.zip
-
-
-Why do some scripts show gibberish characters?
----------------------------------------------
-Those PowerShell scripts are using Unicode characters. Use a modern console supporting UTF-8 such as Windows Terminal, please.
-
-
-How to set PowerShell as default shell on Linux?
------------------------------------------------
-Make sure PowerShell is installed, then execute: `chsh -s /usr/bin/pwsh <username>`. In case you experience an "invalid shell" error, add "/usr/bin/pwsh" to /etc/shells.
-
-
-How to add the scripts to the search path?
------------------------------------------
-Want to use the PowerShell scripts everywhere on the command-line? Then you need to add the Scripts/ subfolder to the search path:
-
-* **On Linux using Bash:** edit .profile in your home directory and add the line: PATH="$PATH:/path/to/PowerShell/Scripts"
-* **On Windows:** open the environment variables dialogue and add the full path to Scripts/ to the system environment variable "Path"
-
-
-How to use PowerShell in Windows context menus?
-----------------------------------------------
-* to enable "right-click > New > Windows PowerShell Script" execute `Add_ps1_to_New_context_menu.reg` in subfolder [Data/](../Data)
-* to disable this execute `Remove_ps1_from_New_context_menu.reg` in subfolder [Data/](../Data)
-
-
-How to execute PowerShell scripts by voice?
-------------------------------------------
-See the [voice control page](VoiceControl.md) for more information.
-
-
-Which editor to use for PowerShell scripts?
-------------------------------------------
-* *PowerShell ISE* (Integrated Scripting Environment) - Official PowerShell development environment included with Microsoft Windows.
-* *Visual Studio Code* - Supporting syntax highlighting, on-the-fly problem checking and an integrated PowerShell Console (available for free on Linux, Mac OS and Windows).
-* *PowerShell Studio* - Powerful PowerShell IDE with module, help, and user interface development tools, high DPI support and regular updates.
-* *PowerShell Plus* - All in one IDE.
-* *Atom package* - Add-on with PowerShell language support for Atom.
-* *SublimeText package* - Add-on with PowerShell language support for Sublime Text.
-* or simply use your *favorite text editor*
-
-
-How to write good PowerShell scripts?
-------------------------------------
-Good PowerShell scripts are user-friendly and platform-independant. As a guideline follow these rules, please:
-
-1. the filename is named using the `<verb>-<object>.ps1` scheme
-2. the encoding is UTF-8-BOM to provide Unicode character support
-3. the script has execute file permissions: chmod a+rx <file> (for Linux support)
-4. the script provides a comment-based help with synopsis, description, parameters, link, author, and license
-5. check the requirements (e.g. #Requires -RunAsAdministrator, or #Requires -Version 3)
-6. prefer command-line options, else ask the user for help
-7. recommended is `Set-StrictMode -Version Latest` to enable additional error checking
-8. for readibility use UpperCamelCase for variables and functions, lowerCamelCase for everything else
-9. on error call write-error with keyword "ERROR:" (to support log parsers) and exit the error code (mostly 1)
-10. on success exit with error code 0 (exit 0)
-
-
-Want to contribute or found a bug or issue?
-------------------------------------------
-If you find something bad (like a bug, error, or any issue), please report it here by open an Issue.
-
-Or even better: Fork the repository, add or fix the script and submit a pull request, so others can participate too.  
-
-
-Your question is not answered here?
-----------------------------------
-Send your question to: markus [at] fleschutz [dot] de
--- a/Docs/VoiceControl.md
+++ b/Docs/VoiceControl.md
@ -1,114 +0,0 @@
-Executing PowerShell Scripts by Voice
-=====================================
-Voice recognition and response (VRR) is so much fun and so comfortable. Just try it for yourself!
-
-
-🔧 Installation
--------------
-1. Download and install *Serenade* from https://serenade.ai/ (Serenade is freely available for Linux, MacOS, and Windows).
-2. Download and install the *PowerShell Scripts*, then set the search path to it.
-3. Execute: `./export-to-serenade.ps1 Computer` in the *PowerShell Scripts*, this creates a custom JavaScript file at `$HOME/.serenade/scripts/PowerShell.js` using the wake word 'Computer'. Recommended wake words with a high recognition rate are: "Alexa", "Bixby", "Computer", "James", or "Jarvis". In the following the wake word "Computer" is used.
-
-
-🗣 Usage
-------
-1. Launch *Serenade* and click into the circle to enable Listening mode.
-2. Launch *Windows Terminal* and click into the window.
-3. Speak into the microphone: `Computer, open calculator` - this executes the PowerShell script `open-calculator.ps1` which launches the calculator application.
-
-More supported voice commands are:
-
-`Computer, open` [app]
----------------------
-* launches the given application - replace [app] by: `3D-Viewer`, `Calculator`, `Git Extensions`, `Microsoft Paint`, `Microsoft Store`, `Netflix`, `Notepad`, `OBS Studio`, `Outlook`, `Paint 3D`, `Spotify`, `Thunderbird`, `Visual Studio`, or `Windows Terminal`.
-* when finished say: "Computer, close [app]" to close the application.
-
-`Computer, check` [name]
------------------------
-* lets the computer check something - replace [name] by: `CPU`, `date`, `DNS`, `drives`, `Earth` (fun), `operating system`, `ping`, `swap space`, `time`, `time zone`, `up-time`, `VPN`, or `weather`.
-
-`Computer, open` [name] `browser`
---------------------------------
-* launches the given Web browser or opens a new tab - replace [name] by: `Chrome`, `default`, `Edge`, or `Firefox`.
-* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
-
-
-`Computer, open` [name] `drive`
-------------------------------
-* launches the File Explorer with the given drive - replace [name] by: `C:`, `D:`, `E:`, `F:`, or `M:`.
-* when finished say: "Computer, close file explorer" to close the File Explorer.
-
-
-`Computer, open` [name] `folder`
--------------------------------
-* launches the File Explorer with the given folder - replace [name] by: `autostart`, `desktop`, `documents`, `downloads`, `Dropbox`, `home`, `music`, `OneDrive`, `pictures`, `recycle bin`, `repos`, or `videos`.
-* when finished say: "Computer, close file explorer" to close the File Explorer.
-
-
-`Computer, open` [name] `website`
---------------------------------
-* launches the default Web browser with the given website - replace [name] by: `Amazon`, `Apple`, `Baidu`, `BBC`, `BitBucket`, `CDC`, `CIA`, `CNN`, `DistroWatch`, `Dropbox`, `eBay`, `Facebook`, `FBI`, `Flipboard`, `FourSquare`, `FRITZ!Box`, `FRITZ!Repeater`, `GitHub`, `GliderTracker`, `HolidayCheck`, `HRworks`, `Instagram`, `IPFS`, `Microsoft`, `NASA`, `NBC`, `Netflix`, `Notepad`, `Outdoor Active`, `PayPal`, `Pinterest`, `Pixabay`, `Plex`, `Slashdot`, `Snap Store`, `Starbucks`, `Tesla`, `TikTok`, `Topo Map`, `Twitter`,  `UFA`, `Unsplash`, `Walmart`, `WhatsApp`, `White House`, `Windy`, `Wikipedia`, `Wired`, `Wolfram Alpha`, `World News`, `Yahoo`, or `YouTube`.
-* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
-
-
-`Computer, show` [name] `city`
------------------------------
-* launches the default Web browser with Google Maps at the given city - replace [name] by: `Atlanta`, `Barcelona`, `Berlin`, `Boston`, `Cairo`, `Cape Town`, `Chicago`, `Dallas`, `Denver`, `Dubai`, `Dublin`, `Frankfurt`, `Hamburg`, `Hong Kong`, `Jerusalem`, `Kansas`, `Las Vegas`, `Lissabon`, `London`, `Los Angeles`, `Madrid`, `Mexico`, `Miami`, `Montreal`, `Moscow`, `Munich`, `New York`, `Panama`, `Paris`, `Rome`, `San Francisco`, `Seattle`, `Singapore`, `Sydney`, `Tokyo`, `Toronto`, `Tunis`, `Vienna`, `Washington`, or `Zurich`.
-* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
-
-
-`Computer, play radio` [name]
-----------------------------
-* launches the default Web browser and tunes into an internet radio station - replace [name] by: `7`, `Arabella`, `Bob`, `Club Mix`, `Dance FM`, `FFN`, `Galaxy`, `Gong`, `Ibiza`, `Jam FM`, `Kiss Kiss`, `Malibu`, `N-JOY`, `Paloma`, or `You FM`.
-* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
-
-
-`Computer, play` [name] `sound`
-------------------------------
-* starts to play the given audio sound - replace [name] by: `bee`, `beep`, `cat`, `cow`, `dog`, `donkey`, `elephant`, `elk`, `frog`, `goat`, `gorilla`, `horse`, `lion`, `parrot`, `pig`, `rattlesnake`, `vulture`, or `wolf`.
-
-
-`Computer, play` [name] `game`
------------------------------
-* launches the default Web browser and plays the given game - replace [name] by: `2048`, `Chess`, `Cube`, `Pacman`, `Tetris`, `TicTacToe`, or `Tower`.
-* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
-
-
-`Computer, open` [name] `settings`
----------------------------------
-* launches the Windows settings - replace [name] by: `activation`, `apps`, `background`, `backup`, `bluetooth`, `color`, `date`, `default apps`, `developer`, `display`, `ethernet`, `lockscreen`, `maps`, `printer`, `proxy`, `recovery`, `speech`, `start`, `system` *(the top level settings!)*, `taskbar`, `themes`, `time`, `update`, `USB`, `VPN`, or `Wifi`.
-* when finished say: "Computer, close system settings" to close the Windows settings.
-
-
-`Computer, show` [name] `manual`
--------------------------------
-* launches the default Web browser with the given manual - replace [name] by: `Azure`, `Bash`, `Blender`, `Chrome`, `Edge`, `Firefox`, `Git`, `OBS Studio`, `PowerShell`, `Serenade`, `Vim`, `Voice` *(yes, this page!)*, or `Windows`.
-* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
-
-
-🔊 Audio Voice Commands
------------------------
-* `Computer, mute audio`
-* `Computer, unmute audio`
-* `Computer, turn volume up`
-* `Computer, turn volume down`
-
-
-💭 Misc Voice Commands
----------------------
-* `Computer, locate my phone`
-* `Computer, tell joke`
-* `Computer, tell quote`
-
-
-💬 Conversation Commands
-------------------------
-* `Computer, good morning`
-* `Computer, good evening`
-* `Computer, good night`
-* `Computer, how are you?`
-* `Computer, thank you`
-* `Computer, I'll be back`
-* `Computer, good bye`
-* `Computer, bye-bye`
-* `Computer, see you`
--- a/Docs/add-firewall-rules.md
+++ b/Docs/add-firewall-rules.md
@ -1,38 +0,0 @@
-## add-firewall-rules.ps1 - Adds firewall rules for executables (needs admin rights)
-
-This script adds firewall rules for the given executable. Administrator rights are required.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/add-firewall-rules.ps1 [[-PathToExecutables] <String>] [<CommonParameters>]
-
-PathToExecutables <String>
-    Specifies the path to the executables
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./add-firewall-rules C:\MyApp\bin
-Adding firewall rule for C:\MyApp\bin\app1.exe
-Adding firewall rule for C:\MyApp\bin\app2.exe
-...
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of add-firewall-rules.ps1*
--- a/Docs/add-memo.md
+++ b/Docs/add-memo.md
@ -1,36 +0,0 @@
-## add-memo.ps1 - Adds a memo text to $HOME/Memos.csv
-
-This script adds the given memo text to $HOME/Memos.csv.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/add-memo.ps1 [[-text] <String>] [<CommonParameters>]
-
-text <String>
-    Specifies the text to memorize
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./add-memo "Buy apples"
-✔️ added to 📄/home/markus/Memos.csv
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of add-memo.ps1*
--- a/Docs/alert.md
+++ b/Docs/alert.md
@ -1,35 +0,0 @@
-## alert.ps1 - Handles and escalates an alert
-
-This script handles and escalates the given alert message.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/alert.ps1 [[-Message] <String>] [<CommonParameters>]
-
-Message <String>
-    Specifies the alert message
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./alert "Harddisk failure"
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of alert.ps1*
--- a/Docs/build-repo.md
+++ b/Docs/build-repo.md
@ -1,35 +0,0 @@
-## build-repo.ps1 - Builds a Git repository
-
-This scripts supports building with cmake, configure, autogen, Imakefile and Makefile.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/build-repo.ps1 [[-RepoDir] <String>] [<CommonParameters>]
-
-RepoDir <String>
-    Specifies the path to the Git repository
-    
-    Required?                    false
-    Position?                    1
-    Default value                "$PWD"
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./build-repo C:\MyRepo
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of build-repo.ps1*
--- a/Docs/build-repos.md
+++ b/Docs/build-repos.md
@ -1,35 +0,0 @@
-## build-repos.ps1 - Builds all Git repositories in a folder
-
-This script builds all Git repositories in a given folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/build-repos.ps1 [[-ParentDir] <String>] [<CommonParameters>]
-
-ParentDir <String>
-    Specifies the path to the folder containing the Git repositories
-    
-    Required?                    false
-    Position?                    1
-    Default value                "$PWD"
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./build-repos C:\MyRepos
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of build-repos.ps1*
--- a/Docs/cd-autostart.md
+++ b/Docs/cd-autostart.md
@ -1,27 +0,0 @@
-## cd-autostart.ps1 - Sets the working directory to the user's autostart folder
-
-This script changes the working directory to the user's autostart folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-autostart.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-autostart
-📂C:\Users\Markus\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-autostart.ps1*
--- a/Docs/cd-desktop.md
+++ b/Docs/cd-desktop.md
@ -1,27 +0,0 @@
-## cd-desktop.ps1 - Sets the working directory to the user's desktop folder
-
-This script changes the working directory to the user's desktop folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-desktop.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-desktop
-📂/home/markus/Desktop
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-desktop.ps1*
--- a/Docs/cd-docs.md
+++ b/Docs/cd-docs.md
@ -1,27 +0,0 @@
-## cd-docs.ps1 - Sets the working directory to the user's documents folder
-
-This scripts changes the working directory to the user's documents folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-docs.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-docs
-📂/home/markus/Documents
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-docs.ps1*
--- a/Docs/cd-downloads.md
+++ b/Docs/cd-downloads.md
@ -1,27 +0,0 @@
-## cd-downloads.ps1 - Sets the working directory to the user's downloads folder
-
-This script changes the working directory to the user's downloads folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-downloads.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-downloads
-📂/home/markus/Downloads
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-downloads.ps1*
--- a/Docs/cd-dropbox.md
+++ b/Docs/cd-dropbox.md
@ -1,27 +0,0 @@
-## cd-dropbox.ps1 - Sets the working directory to the user's Dropbox folder
-
-This script changes the working directory to the user's Dropbox folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-dropbox.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-dropbox
-📂/home/markus/Dropbox
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-dropbox.ps1*
--- a/Docs/cd-home.md
+++ b/Docs/cd-home.md
@ -1,27 +0,0 @@
-## cd-home.ps1 - Sets the working directory to the user's home directory
-
-This script changes the working directory to the user's home directory.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-home.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-home
-📂/home/markus
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-home.ps1*
--- a/Docs/cd-music.md
+++ b/Docs/cd-music.md
@ -1,27 +0,0 @@
-## cd-music.ps1 - Sets the working directory to the user's music folder
-
-This script changes the working directory to the user's music folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-music.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-music
-📂/home/markus/Music
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-music.ps1*
--- a/Docs/cd-onedrive.md
+++ b/Docs/cd-onedrive.md
@ -1,27 +0,0 @@
-## cd-onedrive.ps1 - Sets the working directory to the user's OneDrive folder
-
-This script changes the working directory to the user's OneDrive folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-onedrive.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-onedrive
-📂/home/markus/OneDrive
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-onedrive.ps1*
--- a/Docs/cd-pics.md
+++ b/Docs/cd-pics.md
@ -1,27 +0,0 @@
-## cd-pics.ps1 - Sets the working directory to the user's pictures folder
-
-This script changes the working directory to the user's pictures folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-pics.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-pics
-📂/home/markus/Pictures
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-pics.ps1*
--- a/Docs/cd-recycle-bin.md
+++ b/Docs/cd-recycle-bin.md
@ -1,13 +0,0 @@
-## cd-recycle-bin.ps1 - cd-recycle-bin.ps1 
-
-
-## Parameters
-```powershell
-
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-recycle-bin.ps1*
--- a/Docs/cd-repos.md
+++ b/Docs/cd-repos.md
@ -1,27 +0,0 @@
-## cd-repos.ps1 - Sets the working directory to the user's Git repositories folder
-
-This script changes the working directory to the user's Git repositories folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-repos.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-repos
-📂/home/markus/Repos
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-repos.ps1*
--- a/Docs/cd-root.md
+++ b/Docs/cd-root.md
@ -1,27 +0,0 @@
-## cd-root.ps1 - Sets the working directory to the root directory (C:\ on Windows)
-
-This script changes the working directory to the root directory (C:\ on Windows).
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-root.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-root
-📂C:\
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-root.ps1*
--- a/Docs/cd-scripts.md
+++ b/Docs/cd-scripts.md
@ -1,27 +0,0 @@
-## cd-scripts.ps1 - Sets the working directory to the PowerShell scripts folder
-
-This script changes the working directory to the PowerShell scripts folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-scripts.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-scripts
-📂/home/markus/PowerShell/Scripts
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-scripts.ps1*
--- a/Docs/cd-ssh.md
+++ b/Docs/cd-ssh.md
@ -1,27 +0,0 @@
-## cd-ssh.ps1 - Sets the working directory to the user's SSH folder
-
-This script changes the working directory to the user's SSH folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-ssh.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-ssh
-📂/home/markus/.ssh
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-ssh.ps1*
--- a/Docs/cd-up.md
+++ b/Docs/cd-up.md
@ -1,27 +0,0 @@
-## cd-up.ps1 - Sets the working directory to one level up
-
-This script changes the working directory to one directory level up.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-up.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> .\cd-up
-(one level up)
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-up.ps1*
--- a/Docs/cd-up2.md
+++ b/Docs/cd-up2.md
@ -1,27 +0,0 @@
-## cd-up2.ps1 - Sets the working directory to two directory levels up
-
-This script changes the working directory to two directory level up.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-up2.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-up2
-(two levels up)
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-up2.ps1*
--- a/Docs/cd-up3.md
+++ b/Docs/cd-up3.md
@ -1,27 +0,0 @@
-## cd-up3.ps1 - Sets the working directory to three directory levels up
-
-This script changes the working directory to three directory levels up.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-up3.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-up3
-(three levels up)
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-up3.ps1*
--- a/Docs/cd-up4.md
+++ b/Docs/cd-up4.md
@ -1,27 +0,0 @@
-## cd-up4.ps1 - Sets the working directory to four directory levels up
-
-This script changes the working directory to four directory levels up.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-up4.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-up4
-(four levels up)
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-up4.ps1*
--- a/Docs/cd-videos.md
+++ b/Docs/cd-videos.md
@ -1,27 +0,0 @@
-## cd-videos.ps1 - Sets the working directory to the user's videos folder
-
-This script changes the working directory to the user's videos folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/cd-videos.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./cd-videos
-📂/home/markus/Videos
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of cd-videos.ps1*
--- a/Docs/check-dns-resolution.md
+++ b/Docs/check-dns-resolution.md
@ -1,27 +0,0 @@
-## check-dns-resolution.ps1 - Checks the DNS resolution with frequently used domain names
-
-This script checks the DNS resolution with frequently used domain names.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-dns-resolution.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-dns-resolution
-✔️ 11.8 domains/sec (177 domains resolved in 15 sec)
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-dns-resolution.ps1*
--- a/Docs/check-drive-space.md
+++ b/Docs/check-drive-space.md
@ -1,45 +0,0 @@
-## check-drive-space.ps1 - Checks a drive for free space left (20 GB by default)
-
-This script checks a drive for free space left (20 GB by default).
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-drive-space.ps1 [[-Drive] <String>] [[-MinLevel] <Int32>] [<CommonParameters>]
-
-Drive <String>
-    Specifies the drive to check
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-MinLevel <Int32>
-    Specifies the minimum level in Gigabyte
-    
-    Required?                    false
-    Position?                    2
-    Default value                20
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-drive-space C
-✔️ 172 GB left on drive C (61 of 233 GB used)
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-drive-space.ps1*
--- a/Docs/check-file-system.md
+++ b/Docs/check-file-system.md
@ -1,36 +0,0 @@
-## check-file-system.ps1 - Checks the file system of a drive (needs admin rights)
-
-This script checks the file system of a drive. It needs admin rights.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-file-system.ps1 [[-Drive] <String>] [<CommonParameters>]
-
-Drive <String>
-    Specifies the drive to check
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-file-system C
-✔️ file system on drive C is clean
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-file-system.ps1*
--- a/Docs/check-health.md
+++ b/Docs/check-health.md
@ -1,33 +0,0 @@
-## check-health.ps1 - Checks the health of the local computer
-
-This script checks the health of the local computer.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-health.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-health
-✔️ 1213 GB left for swap space (67 of 1280 GB used)
-✔️ 172 GB left on drive C (61 of 233 GB used)
-✔️ 30.3 °C CPU temperature - good
-✔️ 19.7 domains/s (177 domains resolved in 9 sec)
-✔️ 29 ms ping average (13 ms min, 110 ms max, 10 hosts)
-✔️ Windmill is healthy
-
-```
-
-## Notes
-Author:  Markus Fleschutz
-License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-health.ps1*
--- a/Docs/check-ipv4-address.md
+++ b/Docs/check-ipv4-address.md
@ -1,36 +0,0 @@
-## check-ipv4-address.ps1 - Checks an IPv4 address for validity
-
-This script checks the given IPv4 address for validity.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-ipv4-address.ps1 [[-Address] <String>] [<CommonParameters>]
-
-Address <String>
-    Specifies the IPv4 address to check
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-ipv4-address 192.168.11.22
-✔️ IPv4 192.168.11.22 is valid
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-ipv4-address.ps1*
--- a/Docs/check-ipv6-address.md
+++ b/Docs/check-ipv6-address.md
@ -1,36 +0,0 @@
-## check-ipv6-address.ps1 - Checks an IPv6 address for validity
-
-This script checks the given IPv6 address for validity
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-ipv6-address.ps1 [[-Address] <String>] [<CommonParameters>]
-
-Address <String>
-    Specifies the IPv6 address to check
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-ipv6-address fe80::200:5aee:feaa:20a2
-✔️ IPv6 fe80::200:5aee:feaa:20a2 is valid
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-ipv6-address.ps1*
--- a/Docs/check-mac-address.md
+++ b/Docs/check-mac-address.md
@ -1,37 +0,0 @@
-## check-mac-address.ps1 - Checks the given MAC address for validity
-
-This script checks the given MAC address for validity
-Supported MAC address formats are: 00:00:00:00:00:00 or 00-00-00-00-00-00 or 000000000000.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-mac-address.ps1 [[-MAC] <String>] [<CommonParameters>]
-
-MAC <String>
-    Specifies the MAC address to check
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-mac-address 11:22:33:44:55:66
-✔️ MAC address 11:22:33:44:55:66 is valid
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-mac-address.ps1*
--- a/Docs/check-ping.md
+++ b/Docs/check-ping.md
@ -1,37 +0,0 @@
-## check-ping.ps1 - Checks the ping latency from the local computer to selected Internet hosts
-
-This script checks the ping latency from the local computer to selected Internet hosts.
-The hosts by default are: amazon.com,apple.com,bing.com,cnn.com,dropbox.com,facebook.com,google.com,live.com,twitter.com,youtube.com
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-ping.ps1 [[-hosts] <String>] [<CommonParameters>]
-
-hosts <String>
-    Specifies the hosts to check (separated by comma)
-    
-    Required?                    false
-    Position?                    1
-    Default value                amazon.com,apple.com,bing.com,cnn.com,dropbox.com,facebook.com,google.com,live.com,twitter.com,youtube.com
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-ping
-✔️ Ping is 36 ms average (13 ms min, 109 ms max, using 10 hosts)
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-ping.ps1*
--- a/Docs/check-smart-devices.md
+++ b/Docs/check-smart-devices.md
@ -1,37 +0,0 @@
-## check-smart-devices.ps1 - Performs a selftest on your S.M.A.R.T. HDD/SSD devices.
-
-This script performs a selftest on your S.M.A.R.T. HDD/SSD devices.
-       It requires smartctl (smartmontools package) and admin rights.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-smart-devices.ps1 [[-type] <String>] [<CommonParameters>]
-
-type <String>
-    Specifies the type of selftest: either short (default) or long
-    
-    Required?                    false
-    Position?                    1
-    Default value                short
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-smart-devices
-✔️ short selftest started on S.M.A.R.T. device /dev/sda
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-smart-devices.ps1*
--- a/Docs/check-subnet-mask.md
+++ b/Docs/check-subnet-mask.md
@ -1,36 +0,0 @@
-## check-subnet-mask.ps1 - Checks the given subnet mask for validity
-
-This script checks the given subnet mask for validity.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-subnet-mask.ps1 [[-address] <String>] [<CommonParameters>]
-
-address <String>
-    Specifies the subnet mask to check
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-subnet-mask 255.255.255.0
-✔️ subnet mask 255.255.255.0 is valid
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-subnet-mask.ps1*
--- a/Docs/check-swap-space.md
+++ b/Docs/check-swap-space.md
@ -1,36 +0,0 @@
-## check-swap-space.ps1 - Checks the free swap space
-
-This script checks the free swap space.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-swap-space.ps1 [[-MinLevel] <Int32>] [<CommonParameters>]
-
-MinLevel <Int32>
-    Specifies the minimum level (50 GB by default)
-    
-    Required?                    false
-    Position?                    1
-    Default value                50
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-swap-space
-✔️ 1213 GB left for swap space (67 of 1280 GB used)
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-swap-space.ps1*
--- a/Docs/check-symlinks.md
+++ b/Docs/check-symlinks.md
@ -1,37 +0,0 @@
-## check-symlinks.ps1 - Checks every symlink in a folder (including subfolders)
-
-This script checks every symlink in a folder (including subfolders).
-Returns the number of broken symlinks as exit value.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-symlinks.ps1 [[-folder] <String>] [<CommonParameters>]
-
-folder <String>
-    Specifies the path to the directory tree
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-symlinks .
-✔️ 0 out of 10 symlinks are broken in 📂/home/markus
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-symlinks.ps1*
--- a/Docs/check-weather.md
+++ b/Docs/check-weather.md
@ -1,35 +0,0 @@
-## check-weather.ps1 - Checks the weather for critical values
-
-Checks the current weather for critical values.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-weather.ps1 [[-location] <String>] [<CommonParameters>]
-
-location <String>
-    Specifies the location to use (determined automatically per default)
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-weather
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-weather.ps1*
--- a/Docs/check-windows-system-files.md
+++ b/Docs/check-windows-system-files.md
@ -1,27 +0,0 @@
-## check-windows-system-files.ps1 - Checks the validity of the Windows system files (requires admin rights)
-
-This script checks the validity of the Windows system files. It requires admin rights.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-windows-system-files.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-windows-system-files
-✔️ checked Windows system files
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-windows-system-files.ps1*
--- a/Docs/check-xml-file.md
+++ b/Docs/check-xml-file.md
@ -1,36 +0,0 @@
-## check-xml-file.ps1 - Checks the given XML file for validity
-
-This script checks the given XML file for validity.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/check-xml-file.ps1 [[-file] <String>] [<CommonParameters>]
-
-file <String>
-    Specifies the path to the XML file to check
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./check-xml-file myfile.xml
-✔️ XML file is valid
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of check-xml-file.ps1*
--- a/Docs/clean-repo.md
+++ b/Docs/clean-repo.md
@ -1,37 +0,0 @@
-## clean-repo.ps1 - Cleans a Git repository from untracked files (including submodules)
-
-This script cleans a Git repository from untracked files (including submodules).
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/clean-repo.ps1 [[-RepoDir] <String>] [<CommonParameters>]
-
-RepoDir <String>
-    Specifies the path to the Git repository
-    
-    Required?                    false
-    Position?                    1
-    Default value                "$PWD"
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./clean-repo C:\MyRepo
-🧹 Cleaning from untracked files...
-✔️ cleaned Git repository 📂C:\MyRepo in 0 sec
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of clean-repo.ps1*
--- a/Docs/clean-repos.md
+++ b/Docs/clean-repos.md
@ -1,35 +0,0 @@
-## clean-repos.ps1 - Cleans all Git repositories in a folder from untracked files (including submodules)
-
-This script cleans all Git repositories in a folder from untracked files (including submodules).
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/clean-repos.ps1 [[-ParentDir] <String>] [<CommonParameters>]
-
-ParentDir <String>
-    Specifies the path to the parent folder
-    
-    Required?                    false
-    Position?                    1
-    Default value                "$PWD"
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./clean-repos C:\MyRepos
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of clean-repos.ps1*
--- a/Docs/clear-recycle-bin.md
+++ b/Docs/clear-recycle-bin.md
@ -1,28 +0,0 @@
-## clear-recycle-bin.ps1 - Removes the content of the recycle bin folder permanently
-
-This script removes the content of the recycle bin folder permanently.
-NOTE: can not be undo!
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/clear-recycle-bin.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./clear-recycle-bin
-✔️ cleared recycle bin
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of clear-recycle-bin.ps1*
--- a/Docs/clone-repos.md
+++ b/Docs/clone-repos.md
@ -1,35 +0,0 @@
-## clone-repos.ps1 - Clones well-known Git repositories into a folder
-
-This script clones well-known Git repositories into a folder.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/clone-repos.ps1 [[-folder] <String>] [<CommonParameters>]
-
-folder <String>
-    Specifies the target folder
-    
-    Required?                    false
-    Position?                    1
-    Default value                "$PWD"
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./clone-repos C:\Users\Markus\Repos
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of clone-repos.ps1*
--- a/Docs/close-calculator.md
+++ b/Docs/close-calculator.md
@ -1,26 +0,0 @@
-## close-calculator.ps1 - Closes the calculator program
-
-This script closes the calculator program gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-calculator.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-calculator
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-calculator.ps1*
--- a/Docs/close-chrome.md
+++ b/Docs/close-chrome.md
@ -1,26 +0,0 @@
-## close-chrome.ps1 - Closes the Google Chrome Web browser
-
-This script closes the Google Chrome Web browser gracefully.
-
-## Parameters
-```powershell
-close-chrome.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-chrome
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-chrome.ps1*
--- a/Docs/close-cortana.md
+++ b/Docs/close-cortana.md
@ -1,26 +0,0 @@
-## close-cortana.ps1 - Closes Microsoft's Cortana application
-
-This script closes Microsoft's Cortana application gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-cortana.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-cortana
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-cortana.ps1*
--- a/Docs/close-edge.md
+++ b/Docs/close-edge.md
@ -1,26 +0,0 @@
-## close-edge.ps1 - Closes Microsoft's Edge Web browser
-
-This script closes Microsoft's Edge Web browser gracefully.
-
-## Parameters
-```powershell
-close-edge.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-edge
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-edge.ps1*
--- a/Docs/close-file-explorer.md
+++ b/Docs/close-file-explorer.md
@ -1,26 +0,0 @@
-## close-file-explorer.ps1 - Closes Microsoft's File Explorer
-
-This script closes Microsoft's File Explorer gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-file-explorer.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-file-explorer
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-file-explorer.ps1*
--- a/Docs/close-firefox.md
+++ b/Docs/close-firefox.md
@ -1,26 +0,0 @@
-## close-firefox.ps1 - Closes Mozilla's Firefox Web browser
-
-This script closes Mozilla's Firefox Web browser gracefully.
-
-## Parameters
-```powershell
-close-firefox.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-firefox
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-firefox.ps1*
--- a/Docs/close-microsoft-store.md
+++ b/Docs/close-microsoft-store.md
@ -1,26 +0,0 @@
-## close-microsoft-store.ps1 - Closes the Microsoft Store app
-
-This script closes the Microsoft Store application gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-microsoft-store.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-microsoft-store
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-microsoft-store.ps1*
--- a/Docs/close-netflix.md
+++ b/Docs/close-netflix.md
@ -1,26 +0,0 @@
-## close-netflix.ps1 - Closes the Netflix application
-
-This script closes the Netflix application gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-netflix.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-netflix
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-netflix.ps1*
--- a/Docs/close-program.md
+++ b/Docs/close-program.md
@ -1,53 +0,0 @@
-## close-program.ps1 - Closes a program's processes
-
-This script closes a program's processes gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-program.ps1 [[-FullProgramName] <String>] [[-ProgramName] <String>] [[-ProgramAliasName] <String>] [<CommonParameters>]
-
-FullProgramName <String>
-    Specifies the full program name
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-ProgramName <String>
-    Specifies the program name
-    
-    Required?                    false
-    Position?                    2
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-ProgramAliasName <String>
-    Specifies the program alias name
-    
-    Required?                    false
-    Position?                    3
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-program "Google Chrome" "chrome.exe"
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-program.ps1*
--- a/Docs/close-serenade.md
+++ b/Docs/close-serenade.md
@ -1,26 +0,0 @@
-## close-serenade.ps1 - Closes the Serenade.ai application
-
-This script closes the Serenade.ai application gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-serenade.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-serenade
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-serenade.ps1*
--- a/Docs/close-snipping-tool.md
+++ b/Docs/close-snipping-tool.md
@ -1,26 +0,0 @@
-## close-snipping-tool.ps1 - Closes the Snipping Tool
-
-This script closes the Snipping Tool application gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-snipping-tool.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-snipping-tool
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-snipping-tool.ps1*
--- a/Docs/close-spotify.md
+++ b/Docs/close-spotify.md
@ -1,26 +0,0 @@
-## close-spotify.ps1 - Closes Spotify
-
-This script closes the Spotify application gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-spotify.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-spotify
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-spotify.ps1*
--- a/Docs/close-task-manager.md
+++ b/Docs/close-task-manager.md
@ -1,26 +0,0 @@
-## close-task-manager.ps1 - Closes the Task Manager
-
-This script closes the Task Manager application gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-task-manager.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-task-manager
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-task-manager.ps1*
--- a/Docs/close-thunderbird.md
+++ b/Docs/close-thunderbird.md
@ -1,26 +0,0 @@
-## close-thunderbird.ps1 - Closes the Mozilla Thunderbird email client
-
-This script closes the Mozilla Thunderbird email client gracefully.
-
-## Parameters
-```powershell
-close-thunderbird.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-thunderbird
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-thunderbird.ps1*
--- a/Docs/close-vlc.md
+++ b/Docs/close-vlc.md
@ -1,26 +0,0 @@
-## close-vlc.ps1 - Closes the VLC media player application
-
-This script closes the VLC media player application gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-vlc.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-vlc
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-vlc.ps1*
--- a/Docs/close-windows-terminal.md
+++ b/Docs/close-windows-terminal.md
@ -1,27 +0,0 @@
-## close-windows-terminal.ps1 - Closes the Windows Terminal application
-
-This script closes the Windows Terminal application gracefully.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/close-windows-terminal.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./close-windows-terminal
-(Windows Terminal is closed)
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of close-windows-terminal.ps1*
--- a/Docs/configure-git.md
+++ b/Docs/configure-git.md
@ -1,53 +0,0 @@
-## configure-git.ps1 - Configures the user settings for Git
-
-This script configures the user settings for Git.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/configure-git.ps1 [[-FullName] <String>] [[-EmailAddress] <String>] [[-FavoriteEditor] <String>] [<CommonParameters>]
-
-FullName <String>
-    Specifies the user's full name
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-EmailAddress <String>
-    Specifies the user's email address
-    
-    Required?                    false
-    Position?                    2
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-FavoriteEditor <String>
-    Specifies the user's favorite text editor
-    
-    Required?                    false
-    Position?                    3
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./configure-git
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of configure-git.ps1*
--- a/Docs/convert-csv2txt.md
+++ b/Docs/convert-csv2txt.md
@ -1,35 +0,0 @@
-## convert-csv2txt.ps1 - Converts a .CSV file into a text file
-
-This script converts a .CSV file into a text file.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/convert-csv2txt.ps1 [[-Path] <String>] [<CommonParameters>]
-
-Path <String>
-    Specifies the path to the .CSV file
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./convert-csv2txt salaries.csv
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of convert-csv2txt.ps1*
--- a/Docs/convert-mysql2csv.md
+++ b/Docs/convert-mysql2csv.md
@ -1,71 +0,0 @@
-## convert-mysql2csv.ps1 - Convert a MySQL database table to a .CSV file
-
-This script converts a MySQL database table to a .CSV file.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/convert-mysql2csv.ps1 [[-server] <String>] [[-database] <String>] [[-username] <String>] [[-password] <String>] [[-query] <String>] [<CommonParameters>]
-
-server <String>
-    Specifies the server's hostname or IP address
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-database <String>
-    Specifies the database name
-    
-    Required?                    false
-    Position?                    2
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-username <String>
-    Specifies the user name
-    
-    Required?                    false
-    Position?                    3
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-password <String>
-    Specifies the password
-    
-    Required?                    false
-    Position?                    4
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-query <String>
-    Specifies the SQL query
-    
-    Required?                    false
-    Position?                    5
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./convert-mysql2csv
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of convert-mysql2csv.ps1*
--- a/Docs/convert-ps2bat.md
+++ b/Docs/convert-ps2bat.md
@ -1,35 +0,0 @@
-## convert-ps2bat.ps1 - Converts PowerShell scripts to batch files
-
-This script converts one or more PowerShell scripts to .bat batch files.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/convert-ps2bat.ps1 [[-Filepattern] <String>] [<CommonParameters>]
-
-Filepattern <String>
-    Specifies the file pattern
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./convert-ps2bat *.ps1
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of convert-ps2bat.ps1*
--- a/Docs/convert-ps2md.md
+++ b/Docs/convert-ps2md.md
@ -1,35 +0,0 @@
-## convert-ps2md.ps1 - Converts the comment-based help of a PowerShell script to Markdown
-
-This script converts the comment-based help of a PowerShell script to Markdown.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/convert-ps2md.ps1 [[-filename] <String>] [<CommonParameters>]
-
-filename <String>
-    Specifies the path to the PowerShell script
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./convert-ps2md myscript.ps1
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of convert-ps2md.ps1*
--- a/Docs/convert-sql2csv.md
+++ b/Docs/convert-sql2csv.md
@ -1,71 +0,0 @@
-## convert-sql2csv.ps1 - Converts a SQL database table to a .CSV file
-
-This script converts a SQL database table to a .CSV file.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/convert-sql2csv.ps1 [[-server] <String>] [[-database] <String>] [[-username] <String>] [[-password] <String>] [[-query] <String>] [<CommonParameters>]
-
-server <String>
-    Specifies the server's hostname or IP address
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-database <String>
-    Specifies the database name
-    
-    Required?                    false
-    Position?                    2
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-username <String>
-    Specifies the user name
-    
-    Required?                    false
-    Position?                    3
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-password <String>
-    Specifies the password
-    
-    Required?                    false
-    Position?                    4
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-query <String>
-    Specifies the SQL query
-    
-    Required?                    false
-    Position?                    5
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./convert-sql2csv
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of convert-sql2csv.ps1*
--- a/Docs/convert-txt2wav.md
+++ b/Docs/convert-txt2wav.md
@ -1,44 +0,0 @@
-## convert-txt2wav.ps1 - Converts text to a .WAV audio file
-
-This script converts text to a .WAV audio file.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/convert-txt2wav.ps1 [[-Text] <String>] [[-WavFile] <String>] [<CommonParameters>]
-
-Text <String>
-    Specifies the text to use
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-WavFile <String>
-    Specifies the path to the resulting WAV file
-    
-    Required?                    false
-    Position?                    2
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./convert-txt2wav "Hello World" spoken.wav
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of convert-txt2wav.ps1*
--- a/Docs/copy-photos-sorted.md
+++ b/Docs/copy-photos-sorted.md
@ -1,13 +0,0 @@
-## copy-photos-sorted.ps1 - copy-photos-sorted.ps1 [[-SourceDir] <string>] [[-TargetDir] <string>]
-
-
-## Parameters
-```powershell
-
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-*Generated by convert-ps2md.ps1 using the comment-based help of copy-photos-sorted.ps1*
--- a/Docs/decrypt-file.md
+++ b/Docs/decrypt-file.md
@ -1,44 +0,0 @@
-## decrypt-file.ps1 - Decrypts the given file
-
-This script decrypts the given file.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/decrypt-file.ps1 [[-Path] <String>] [[-Password] <String>] [<CommonParameters>]
-
-Path <String>
-    Specifies the path to the file to decrypt
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-Password <String>
-    Specifies the password
-    
-    Required?                    false
-    Position?                    2
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./decrypt-file-rules C:\MyFile.txt "123"
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of decrypt-file.ps1*
--- a/Docs/display-time.md
+++ b/Docs/display-time.md
@ -1,35 +0,0 @@
-## display-time.ps1 - Displays the current time
-
-Displays the current time (for 10 seconds by default)
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/display-time.ps1 [[-Seconds] <Int32>] [<CommonParameters>]
-
-Seconds <Int32>
-    Specifies the number of seconds to display the time
-    
-    Required?                    false
-    Position?                    1
-    Default value                10
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./display-time
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of display-time.ps1*
--- a/Docs/download-dir.md
+++ b/Docs/download-dir.md
@ -1,35 +0,0 @@
-## download-dir.ps1 - Downloads a folder (including subfolders) from an URL
-
-This script downloads a folder (including subfolders) from the given URL.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/download-dir.ps1 [[-URL] <String>] [<CommonParameters>]
-
-URL <String>
-    Specifies the URL where to download from
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./download-dir https://www.cnn.com
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of download-dir.ps1*
--- a/Docs/download-file.md
+++ b/Docs/download-file.md
@ -1,35 +0,0 @@
-## download-file.ps1 - Downloads a file from an URL
-
-This script downloads a file from the given URL
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/download-file.ps1 [[-URL] <String>] [<CommonParameters>]
-
-URL <String>
-    Specifies the URL where to download from
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./download-file https://www.cnn.com/index.html
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of download-file.ps1*
--- a/Docs/edit.md
+++ b/Docs/edit.md
@ -1,35 +0,0 @@
-## edit.ps1 - Opens an editor to edit a file
-
-Opens a  text editor to edit the given file.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/edit.ps1 [[-Filename] <String>] [<CommonParameters>]
-
-Filename <String>
-    Specifies the path to the filename
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./edit C:\MyFile.txt
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of edit.ps1*
--- a/Docs/enable-crash-dumps.md
+++ b/Docs/enable-crash-dumps.md
@ -1,26 +0,0 @@
-## enable-crash-dumps.ps1 - Enables the writing of crash dumps
-
-Enables the writing of crash dumps.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/enable-crash-dumps.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./enable-crash-dumps
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of enable-crash-dumps.ps1*
--- a/Docs/enable-god-mode.md
+++ b/Docs/enable-god-mode.md
@ -1,26 +0,0 @@
-## enable-god-mode.ps1 - Enables the god mode
-
-This script enables the god mode. It adds a new icon to the desktop.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/enable-god-mode.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./enable-god-mode
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of enable-god-mode.ps1*
--- a/Docs/encrypt-file.md
+++ b/Docs/encrypt-file.md
@ -1,44 +0,0 @@
-## encrypt-file.ps1 - Encrypts a file
-
-This script encrypts the given file.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/encrypt-file.ps1 [[-Path] <String>] [[-Password] <String>] [<CommonParameters>]
-
-Path <String>
-    Specifies the path to the file to encrypt
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-Password <String>
-    Specifies the password to use
-    
-    Required?                    false
-    Position?                    2
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./encrypt-file C:\MyFile.txt "123"
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of encrypt-file.ps1*
--- a/Docs/enter-chat.md
+++ b/Docs/enter-chat.md
@ -1,26 +0,0 @@
-## enter-chat.ps1 - Enters a chat using a common network shared file
-
-This script enters a chat using a common network shared file.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/enter-chat.ps1 [<CommonParameters>]
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./enter-chat
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of enter-chat.ps1*
--- a/Docs/export-to-manuals.md
+++ b/Docs/export-to-manuals.md
@ -1,44 +0,0 @@
-## export-to-manuals.ps1 - Exports all scripts as manuals
-
-This script exports the comment based help of all PowerShell scripts as manuals.
-
-## Parameters
-```powershell
-/home/markus/Repos/PowerShell/Scripts/export-to-manuals.ps1 [[-FilePattern] <String>] [[-TargetDir] <String>] [<CommonParameters>]
-
-FilePattern <String>
-    
-    Required?                    false
-    Position?                    1
-    Default value                "$PSScriptRoot/*.ps1"
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-TargetDir <String>
-    
-    Required?                    false
-    Position?                    2
-    Default value                "$PSScriptRoot/../Docs"
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-
-[<CommonParameters>]
-    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS> ./export-to-manuals.ps1
-Found 264 scripts, exporting them to /home/markus/PowerShell/Docs...
-✔️ exported 264 PowerShell scripts in 28 sec
-
-```
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated by convert-ps2md.ps1 using the comment-based help of export-to-manuals.ps1*
--- a/Show More
+++ b/Show More
				`@ -1 +0,0 @@`
				`/* Exported by export-scripts2serenade.ps1 */`