# Description
So sorry to do this during the pre-release freeze, but my plugin crate
split PR broke local socket mode, because `nu-plugin-protocol` didn't
have the compile feature to advertise the `LocalSocket` protocol
feature.
This is a very simple, configuration-only bugfix that I think really
needs to be merged before the release, or else local socket mode won't
work at all.
# Tests + Formatting
There's an oversight in my testing that caused this to not be caught:
the engine really did have the feature, but it just wasn't advertising
it, so for `stress_internals` it was still able to use it successfully.
Post-release I'll try to make sure this is properly handled somehow.
# Description
Minor change but fixes a few rust-analyzer warnings.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes a problem introduced with PR
https://github.com/nushell/nushell/pull/12236. That PR accidentally
stopped `--as-table` from working.
Closes https://github.com/nushell/nushell/issues/12689
It works again.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Update wix/msi to include nu_plugin_polars. 🤞🏻
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This breaks `nu-plugin` up into four crates:
- `nu-plugin-protocol`: just the type definitions for the protocol, no
I/O. If someone wanted to wire up something more bare metal, maybe for
async I/O, they could use this.
- `nu-plugin-core`: the shared stuff between engine/plugin. Less stable
interface.
- `nu-plugin-engine`: everything required for the engine to talk to
plugins. Less stable interface.
- `nu-plugin`: everything required for the plugin to talk to the engine,
what plugin developers use. Should be the most stable interface.
No changes are made to the interface exposed by `nu-plugin` - it should
all still be there. Re-exports from `nu-plugin-protocol` or
`nu-plugin-core` are used as required. Plugins shouldn't ever have to
use those crates directly.
This should be somewhat faster to compile as `nu-plugin-engine` and
`nu-plugin` can compile in parallel, and the engine doesn't need
`nu-plugin` and plugins don't need `nu-plugin-engine` (except for test
support), so that should reduce what needs to be compiled too.
The only significant change here other than splitting stuff up was to
break the `source` out of `PluginCustomValue` and create a new
`PluginCustomValueWithSource` type that contains that instead. One bonus
of that is we get rid of the option and it's now more type-safe, but it
also means that the logic for that stuff (actually running the plugin
for custom value ops) can live entirely within the `nu-plugin-engine`
crate.
# User-Facing Changes
- New crates.
- Added `local-socket` feature for `nu` to try to make it possible to
compile without that support if needed.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
I would like to help with `polars` plugin development and add tests to
all the `polars` command's existing params.
Since I have never written any lines of Rust, even though the task of
creating tests is relatively simple, I would like to ask for feedback to
ensure I did everything correctly here.
# Description
I found a bunch of issues relating to the specialized reimplementation
of `print()` that's done in `nu-cli` and it just didn't seem necessary.
So I tried to unify the behavior reasonably. `PipelineData::print()`
already handles the call to `table` and it even has a `no_newline`
option.
One of the most major issues before was that we were using the value
iterator, and then converting to string, and then printing each with
newlines. This doesn't work well for an external stream, because its
iterator ends up creating `Value::binary()` with each buffer... so we
were doing lossy UTF-8 conversion on those and then printing them with
newlines, which was very weird:
You can see the random newline inserted in a break between buffers, but
this would be even worse if it were on a multibyte UTF-8 character. You
can produce this by writing a large amount of text to a text file, and
then doing `nu -c 'open file.txt'` - in my case I just wrote `^find .`;
it just has to be large enough to trigger a buffer break.
Using `print()` instead led to a new issue though, because it doesn't
abort on errors. This is so that certain commands can produce a stream
of errors and have those all printed. There are tests for e.g. `rm` that
depend on this behavior. I assume we want to keep that, so instead I
made my target `BufferedReader`, and had that fuse closed if an error
was encountered. I can't imagine we want to keep reading from a wrapped
I/O stream if an error occurs; more often than not the error isn't going
to magically resolve itself, it's not going to be a different error each
time, and it's just going to lead to an infinite stream of the same
error.
The test that broke without that was `open . | lines`, because `lines`
doesn't fuse closed on error. But I don't know if it's expected or not
for it to do that, so I didn't target that.
I think this PR makes things better but I'll keep looking for ways to
improve on how errors and streams interact, especially trying to
eliminate cases where infinite error loops can happen.
# User-Facing Changes
- **Breaking**: `BufferedReader` changes + no more public fields
- A raw I/O stream from e.g. `open` won't produce infinite errors
anymore, but I consider that to be a plus
- the implicit `print` on script output is the same as the normal one
now
# Tests + Formatting
Everything passes but I didn't add anything specific.
# Description
Bandaid fix for #12643, where it is not possible to get the exit code of
a failed external command while also having the external command inherit
nushell's stdout and stderr. This changes `try` so that the exit code of
external command is available in the `catch` block via the usual
`$env.LAST_EXIT_CODE`.
# Tests + Formatting
Added one test.
# After Submitting
Rework I/O redirection and possibly exit codes.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Resolves#12654.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`grid` can now throw an error.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added relevant test.
# Description
I've found that sometimes on Linux, this test fails to find the created
process even after it should definitely be running.
Trying to add a little delay.
# Description
Yet another attempt to fix the `stress_internals::test_wrong_version()`
test...
This time I think it's probably because we are getting a broken pipe
write error when we try to send `Hello` or perhaps something after it,
because the pipe has already been closed by the reader when it saw the
invalid version. In that case, an error should be available in state. It
probably makes more sense to send that back to the user rather than an
unhelpful I/O error.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
I thought about bringing `nu_plugin_msgpack` in, but that is MPL with a
clause that prevents other licenses, so rather than adapt that code I
decided to take a crack at just doing it straight from `rmp` to `Value`
without any `rmpv` in the middle. It seems like it's probably faster,
though I can't say for sure how much with the plugin overhead.
@IanManske I started on a `Read` implementation for `RawStream` but just
specialized to `from msgpack` here, but I'm thinking after release maybe
we can polish it up and make it a real one. It works!
# User-Facing Changes
New commands:
- `from msgpack`
- `from msgpackz`
- `to msgpack`
- `to msgpackz`
# Tests + Formatting
Pretty thorough tests added for the format deserialization, with a
roundtrip for serialization. Some example tests too for both `from
msgpack` and `to msgpack`.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] update release notes
# Description
One example for `into bits` says it uses binary value when it actually
uses a filesize. This lead to issue #11412, but I never got around to
fixing the example until this PR.
# Description
The previous messages said that the command printed dates separated by
newlines. But the current iteration of `seq date` returns a list.
# User-Facing Changes
Minor wording edit.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Removes the `commandline` flags and API that was deprecated in 0.91.0
with #11877.
# User-Facing Changes
Users need to migrate to the new `commandline` subcommands introduced in
0.91.0.
# Description
This PR does miscellaneous cleanup in some of the commands from
`nu-cmd-lang`.
# User-Facing Changes
None.
# After Submitting
Cleanup the other commands in `nu-cmd-lang`.
# Description
In this week's nushell meeting, we decided to go ahead with #12622 and
remove lazy records in 0.94.0. For 0.93.0, we will only deprecate `lazy
make`, and so this PR makes `lazy make` print a deprecation warning.
# User-Facing Changes
None, besides the deprecation warning.
# After Submitting
Remove lazy records.
# Description
So far this seems like the winner of my poll on what the name should be.
I'll take this off draft once the poll expires, if this is indeed the
winner.
# Description
Continuing from #12568, this PR further reduces the size of `Expr` from
64 to 40 bytes. It also reduces `Expression` from 128 to 96 bytes and
`Type` from 32 to 24 bytes.
This was accomplished by:
- for `Expr` with multiple fields (e.g., `Expr::Thing(A, B, C)`),
merging the fields into new AST struct types and then boxing this struct
(e.g. `Expr::Thing(Box<ABC>)`).
- replacing `Vec<T>` with `Box<[T]>` in multiple places. `Expr`s and
`Expression`s should rarely be mutated, if at all, so this optimization
makes sense.
By reducing the size of these types, I didn't notice a large performance
improvement (at least compared to #12568). But this PR does reduce the
memory usage of nushell. My config is somewhat light so I only noticed a
difference of 1.4MiB (38.9MiB vs 37.5MiB).
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
The local socket PR introduced a `Waitable` type, which could either
hold a value or be waited on until a value is available. Unlike a
channel, it would always return that value once set.
However, one issue with this design was that there was no way to detect
whether a value would ever be written. This splits the writer into a
different type `WaitableMut`, so that when it is dropped, waiting
threads can fail (because they'll never get a value).
# Tests + Formatting
A test has been added to `stress_internals` to make sure this fails in
the right way.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Trying to give as much context as possible. Now there should be a
spanned error with the call span if possible, and the propagated error
as an inner error if there was one in every case.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Update to latest reedline main branch 4cf8c75d for testing before
release.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This allows the following commands to all accept a filename instead of a
plugin name:
- `plugin use`
- `plugin rm`
- `plugin stop`
Slightly complicated because of the need to also check against
`NU_PLUGIN_DIRS`, but I also fixed some issues with that at the same
time
Requested by @fdncred
# User-Facing Changes
The new commands are updated as described.
# Tests + Formatting
Tests for `NU_PLUGIN_DIRS` handling also made more robust.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Double check new docs to make sure they describe this capability
# Description
This should fix the sometimes failing wrong version test for
stress_internals.
The plugin interface state stores an error if some kind of critical
error happened, and this error should be propagated to any future
operations on the interface, but this wasn't being propagated to plugin
calls that were already waiting.
During plugin registration, the wrong version error needs to be received
as a response to the `get_signature()` to show up properly, but this
would only happen if `get_signature()` started after the `Hello` was
already received and processed. That would be a race condition, which
this commit solves.
cc @sholderbach - this should fix the CI issue
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
This PR updates to the latest main branch in the reedline repo in order
to test the latest reedline changes.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Adds a new keyword, `plugin use`. Unlike `register`, this merely loads
the signatures from the plugin cache file. The file is configurable with
the `--plugin-config` option either to `nu` or to `plugin use` itself,
just like the other `plugin` family of commands. At the REPL, one might
do this to replace `register`:
```nushell
> plugin add ~/.cargo/bin/nu_plugin_foo
> plugin use foo
```
This will not work in a script, because `plugin use` is a keyword and
`plugin add` does not evaluate at parse time (intentionally). This means
we no longer run random binaries during parse.
The `--plugins` option has been added to allow running `nu` with certain
plugins in one step. This is used especially for the `nu_with_plugins!`
test macro, but I'd imagine is generally useful. The only weird quirk is
that it has to be a list, and we don't really do this for any of our
other CLI args at the moment.
`register` now prints a deprecation parse warning.
This should fix#11923, as we now have a complete alternative to
`register`.
# User-Facing Changes
- Add `plugin use` command
- Deprecate `register`
- Add `--plugins` option to `nu` to replace a common use of `register`
# Tests + Formatting
I think I've tested it thoroughly enough and every existing test passes.
Testing nu CLI options and alternate config files is a little hairy and
I wish there were some more generic helpers for this, so this will go on
my TODO list for refactoring.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Update plugins sections of book
- [ ] Release notes
# Description
This adds an extension trait to `Result` that wraps errors in `Spanned`,
saving the effort of calling `.map_err(|err| err.into_spanned(span))`
every time. This will hopefully make it even more likely that someone
will want to use a spanned `io::Error` and make it easier to remove the
impl for `From<io::Error> for ShellError` because that doesn't have span
information.
# Description
Fixes: #11351
And comment here is also fixed:
https://github.com/nushell/nushell/issues/11351#issuecomment-1996191537
The panic can happened if we pipe a variable to a custom command which
recursively called itself inside another block.
TBH, I think I figure out how it works to panic, but I'm not sure if
there is a potention issue if nushell don't mutate a block in such case.
# User-Facing Changes
Nan
# Tests + Formatting
Done
# After Submitting
Done
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
https://github.com/nushell/reedline/pull/781
This will allow others to test and make sure that this reedline fix
works on other terminals and platforms...
`ratatui` introduced a dependency on `stability` which until recently
used `syn 1.x`, with this update all our crates in the default `cargo
build` path are using `syn 2.x`
# Description
Adds two new types in `nu-engine` for evaluating closures: `ClosureEval`
and `ClosureEvalOnce`. This removed some duplicate code and centralizes
our logic for setting up, running, and cleaning up closures. For
example, in the future if we are able to reduce the cloning necessary to
run a closure, then we only have to change the code related to these
types.
`ClosureEval` and `ClosureEvalOnce` are designed with a builder API.
`ClosureEval` is used to run a closure multiple times whereas
`ClosureEvalOnce` is used for a one-shot closure.
# User-Facing Changes
Should be none, unless I messed up one of the command migrations.
Actually, this will fix any unreported environment bugs for commands
that didn't reset the env after running a closure.
# Description
When saving to a file we currently try to check if the data source in
the pipeline metadata is the same as the file we are saving to. If so,
we create an error, since reading and writing to a file at the same time
is currently not supported/handled gracefully. However, there are still
a few instances where this error is not properly triggered, and so this
PR attempts to reduce these cases. Inspired by #12599.
# Tests + Formatting
Added a few tests.
# After Submitting
Some commands still do not properly preserve metadata (e.g., `str trim`)
and so prevent us from detecting this error.
# Description
This pull request provides three new commands:
`polars store-ls` - moved from `polars ls`. It provides the list of all
object stored in the plugin cache
`polars store-rm` - deletes a cached object
`polars store-get` - gets an object from the cache.
The addition of `polars store-get` required adding a reference_count to
cached entries. `polars get` is the only command that will increment
this value. `polars rm` will remove the value despite it's count. Calls
to PolarsPlugin::custom_value_dropped will decrement the value.
The prefix store- was chosen due to there already being a `polars cache`
command. These commands were not made sub-commands as there isn't a way
to display help for sub commands in plugins (e.g. `polars store`
displaying help) and I felt the store- seemed fine anyways.
The output of `polars store-ls` now shows the reference count for each
object.
# User-Facing Changes
polars ls has now moved to polars store-ls
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
Updates `toolkit.nu` to use `plugin add`.
There's no need to spawn a separate `nu` to do `register` anymore, since
`plugin add` is not a keyword
# Description
The `stress_internals` tests can fail sometimes, but usually not on the
CI, because Nushell exits while the plugin is still trying to read or
maybe write something, leading to a broken pipe.
`nu-plugin` already exits with 1 without printing a message on a
protocol-level I/O error, so this just doing the same thing.
I think there's probably a way to correct the plugin handling so that we
wait for plugins to shut down before exiting and this doesn't happen,
but this is the quick fix in the meantime.
follow-up to
- https://github.com/nushell/nushell/pull/12591
cc/ @fdncred
# Description
there was a typo in the doc of `nuon::ToStyle`.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
- Plugin signatures are now saved to `plugin.msgpackz`, which is
brotli-compressed MessagePack.
- The file is updated incrementally, rather than writing all plugin
commands in the engine every time.
- The file always contains the result of the `Signature` call to the
plugin, even if commands were removed.
- Invalid data for a particular plugin just causes an error to be
reported, but the rest of the plugins can still be parsed
# User-Facing Changes
- The plugin file has a different filename, and it's not a nushell
script.
- The default `plugin.nu` file will be automatically migrated the first
time, but not other plugin config files.
- We don't currently provide any utilities that could help edit this
file, beyond `plugin add` and `plugin rm`
- `from msgpackz`, `to msgpackz` could also help
- New commands: `plugin add`, `plugin rm`
# Tests + Formatting
Tests added for the format and for the invalid handling.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Check for documentation changes
- [ ] Definitely needs release notes
# Description
`Value` describes the types of first-class values that users and scripts
can create, manipulate, pass around, and store. However, `Block`s are
not first-class values in the language, so this PR removes it from
`Value`. This removes some unnecessary code, and this change should be
invisible to the user except for the change to `scope modules` described
below.
# User-Facing Changes
Breaking change: the output of `scope modules` was changed so that
`env_block` is now `has_env_block` which is a boolean value instead of a
`Block`.
# After Submitting
Update the language guide possibly.
# Description
For a long time, I was searching for the `str extract` command to
extract regexes from strings. I often painfully used `str replace -r
'(.*)(pattern_to_find)(.*)' '$2'` for such purposes.
Only this morning did I realize that `parse` is what I needed for so
many times, which I had only used for parsing data in tables.
# Description
Fix: #12489
I believe the issue it's because the default value of `NU_LIB_DIRS` and
`NU_PLUGIN_DIRS` is a string, but it should be a list.
So if users don't set up these values in `env.nu`, we will get a
problem.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Closes#12561
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Add version details in `version`'s output. The intended use is for
third-party tools to be able to quickly check version numbers without
having to the parsing from `(version).version` or `$env.NU_VERSION`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
This adds 4 new values to the record from `version`:
```
...
│ major │ 0 │
│ minor │ 92 │
│ patch │ 3 │
│ pre │ a-value │
...
```
`pre` is optional and won't be present most of the time I think.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I ran the new command using `cargo run -- -c version`:
```
╭────────────────────┬─────────────────────────────────────────────────╮
│ version │ 0.92.3 │
│ major │ 0 │
│ minor │ 92 │
│ patch │ 3 │
│ branch │ │
│ commit_hash │ │
│ build_os │ macos-aarch64 │
│ build_target │ aarch64-apple-darwin │
│ rust_version │ rustc 1.77.2 (25ef9e3d8 2024-04-09) │
│ rust_channel │ 1.77.2-aarch64-apple-darwin │
│ cargo_version │ cargo 1.77.2 (e52e36006 2024-03-26) │
│ build_time │ 2024-04-20 15:09:36 +02:00 │
│ build_rust_channel │ release │
│ allocator │ mimalloc │
│ features │ default, sqlite, system-clipboard, trash, which │
│ installed_plugins │ │
╰────────────────────┴─────────────────────────────────────────────────╯
```
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
After this is merged I would like to write docs somewhere for scripts
writer to advise using these members instead of the string values. Where
should I put said docs ?
# Description
This PR improves the `nu --lsp` tooltips by using nu code blocks around
the examples and a few other places.
This is what it looks like in Zed.
Here it is in Helix.
This coloring is far from perfect, but it's what the tree-sitter-nu
queries generate.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
in order to change the style of the _serialized_ NUON data,
`nuon::to_nuon` takes three mutually exclusive arguments, `raw: bool`,
`tabs: Option<usize>` and `indent: Option<usize>` 🤔
this begs to use an enumeration with all possible alternatives, right?
this PR changes the signature of `nuon::to_nuon` to use `nuon::ToStyle`
which has three variants
- `Raw`: no newlines
- `Tabs(n: usize)`: newlines and `n` tabulations as indent
- `Spaces(n: usize)`: newlines and `n` spaces as indent
# User-Facing Changes
the signature of `nuon::to_nuon` changes from
```rust
to_nuon(
input: &Value,
raw: bool,
tabs: Option<usize>,
indent: Option<usize>,
span: Option<Span>,
) -> Result<String, ShellError>
```
to
```rust
to_nuon(
input: &Value,
style: ToStyle,
span: Option<Span>
) -> Result<String, ShellError>
```
# Tests + Formatting
# After Submitting
# Description
Close: #12514
# User-Facing Changes
`^ls | skip 1` will raise an error
```nushell
❯ ^ls | skip 1
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #1:1:2]
1 │ ^ls | skip 1
· ─┬ ──┬─
· │ ╰── only list, binary or range input data is supported
· ╰── input type: raw data
╰────
```
# Tests + Formatting
Sorry I can't add it because of the issue:
https://github.com/nushell/nushell/issues/12558
# After Submitting
Nan
# Description
In conflict with the documentation, the msgpack serializer for plugins
is actually using the compact format, which doesn't name struct fields,
and is instead dependent on their ordering, rendering them as tuples.
This is not a good idea for a robust protocol even if it makes the
serialization and deserialization faster.
I expect this to have some impact on performance, but I think the
robustness is probably worth it.
Deserialization always accepts either format, so this shouldn't cause
too many incompatibilities.
# User-Facing Changes
This does technically change the protocol, but it makes it reflect the
documentation. It shouldn't break deserialization, so plugins shouldn't
necessarily need a recompile.
Performance is likely worse and I should benchmark the difference.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
The polars dtype command is largerly redundant since the introduction of
the schema command. The schema command also has the added benefit that
it's output can be used as a parameter to other schema commands:
```nushell
[[a b]; [5 6] [5 7]] | polars into-df -s ($df | polars schema
```
# User-Facing Changes
`polars dtypes` has been removed. Users should use `polars schema`
instead.
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
playing with the NUON format in Rust code in some plugins, we agreed
with the team it was a great time to create a standalone NUON format to
allow Rust devs to use this Nushell file format.
> **Note**
> this PR almost copy-pastes the code from
`nu_commands/src/formats/from/nuon.rs` and
`nu_commands/src/formats/to/nuon.rs` to `nuon/src/from.rs` and
`nuon/src/to.rs`, with minor tweaks to make then standalone functions,
e.g. remove the rest of the command implementations
### TODO
- [x] add tests
- [x] add documentation
# User-Facing Changes
devs will have access to a new crate, `nuon`, and two functions,
`from_nuon` and `to_nuon`
```rust
from_nuon(
input: &str,
span: Option<Span>,
) -> Result<Value, ShellError>
```
```rust
to_nuon(
input: &Value,
raw: bool,
tabs: Option<usize>,
indent: Option<usize>,
span: Option<Span>,
) -> Result<String, ShellError>
```
# Tests + Formatting
i've basically taken all the tests from
`crates/nu-command/tests/format_conversions/nuon.rs` and converted them
to use `from_nuon` and `to_nuon` instead of Nushell commands
- i've created a `nuon_end_to_end` to run both conversions with an
optional middle value to check that all is fine
> **Note**
> the `nuon::tests::read_code_should_fail_rather_than_panic` test does
give different results locally and in the CI...
> i've left it ignored with comments to help future us :)
# After Submitting
mention that in the release notes for sure!!
# Description
As suggested by @fdncred.
It's neat that this is possible, but the particularly useful part of
this is that we can actually
test it because it doesn't have any external dependencies, unlike the
python plugin.
Right now this just implements exactly the same behavior as the python
plugin, but we could have it
exercise a few more things.
Also fixes a couple of bugs:
- `.nu` plugins were not run with `nu --stdin`, so they couldn't take
input.
- `register` couldn't be called if `--no-config-file` was set, because
it would error on trying to
update the plugin file.
# User-Facing Changes
- `nu_plugin_nu_example` plugin added.
- `register` now works in `--no-config-file` mode.
# Tests + Formatting
Tests added for `nu_plugin_nu_example`.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Add the version bump to the release script just like for python
# Description
EngineState now tracks the script currently running, instead of the
parent directory of the script. This also provides an easy way to expose
the current running script to the user (Issue #12195).
Similarly, StateWorkingSet now tracks scripts instead of directories.
`parsed_module_files` and `currently_parsed_pwd` are merged into one
variable, `scripts`, which acts like a stack for tracking the current
running script (which is on the top of the stack).
Circular import check is added for `source` operations, in addition to
module import. A simple testcase is added for circular source.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
It shouldn't have any user facing changes.
Should close#10833 — though I'd imagine that should have already been
closed.
# Description
Very minor tweak, but it was quite noticeable when using Zellij which
relies on OSC 2 to set pane titles. Before the change:
Note that the default `Pane #1` is still showing for the untouched
shell, but running a command like `htop` or `ls` correctly sets the
title during / afterwards.
After this PR:
There are now no-longer any unset titles — even if the shell hasn't been
touched.
**As an aside:** I feel quite strongly that (at least OSC 2) shell
integration should be enabled by default, as it is for every other Linux
shell I've used, but I'm not sure which issues that caused that the
default config refers to? Which terminals are broken by shell
integration, and could some of the shell integrations be turned on by
default after splitting things into sub-options as suggested in #11301 ?
# User-Facing Changes
You'll just have shell integrations working from right after the shell
has been launched, instead of needing to run something first.
# Tests + Formatting
Not quite sure how to test this one? Are there any other tests that
currently exist for shell integration? I couldn't quite track them
down...
# After Submitting
Let me know if you think this needs any user-facing docs changes!
# Description
This PR adds the ability to set metadata. This is especially useful for
activating LS_COLORS when using table literals.
You can also set the filepath metadata, although I'm not really user how
useful this is. We may end up removing this option entirely.
```nushell
❯ "crates" | metadata set --datasource-filepath $'(pwd)/crates' | metadata
╭────────┬───────────────────────────────────╮
│ source │ /Users/fdncred/src/nushell/crates │
╰────────┴───────────────────────────────────╯
```
No file paths are checked. You could also do this.
```nushell
❯ "crates" | metadata set --datasource-filepath $'a/b/c/d/crates' | metadata
╭────────┬────────────────╮
│ source │ a/b/c/d/crates │
╰────────┴────────────────╯
```
The command name and parameter names are still WIP. We could change
them.
There are currently 3 kinds of metadata in nushell.
```rust
pub enum DataSource {
Ls,
HtmlThemes,
FilePath(PathBuf),
}
```
I've skipped adding `HtmlThemes` because it seems to be specific to our
`to html` command only.
I had previously changed NuLazyFrame::collect to set the NuDataFrame's
from_lazy field to false to prevent conversion back to a lazy frame. It
appears there are cases where this should happen. Instead, I am only
setting from_lazy=false inside the `polars collect` command.
[Related discord
message](https://discord.com/channels/601130461678272522/1227612017171501136/1230600465159421993)
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
Adds a `Box` around the `ImportPattern` in `Expr` which decreases the
size of `Expr` from 152 to 64 bytes (and `Expression` from 216 to 128
bytes). This seems to speed up parsing a little bit according to the
benchmarks (main is top, PR is bottom):
```
benchmarks fastest │ slowest │ median │ mean │ samples │ iters
benchmarks fastest │ slowest │ median │ mean │ samples │ iters
├─ parser_benchmarks │ │ │ │ │
├─ parser_benchmarks │ │ │ │ │
│ ├─ parse_default_config_file 2.287 ms │ 4.532 ms │ 2.311 ms │ 2.437 ms │ 100 │ 100
│ ├─ parse_default_config_file 2.255 ms │ 2.781 ms │ 2.281 ms │ 2.312 ms │ 100 │ 100
│ ╰─ parse_default_env_file 421.8 µs │ 824.6 µs │ 494.3 µs │ 527.5 µs │ 100 │ 100
│ ╰─ parse_default_env_file 402 µs │ 486.6 µs │ 414.8 µs │ 416.2 µs │ 100 │ 100
```
# Description
Remove unused/effect-less features, make sure we show all relevant
features in `version`
# User-Facing Changes
- **Remove unused feature `wasi`**
- will cause failure to build should you enable it. Otherwise no effect
- **Include feat `system-clipboard` in `version`**
# Description
This PR adds a `ListItem` enum to our set of AST types. It encodes the
two possible expressions inside of list expression: a singular item or a
spread. This is similar to the existing `RecordItem` enum. Adding
`ListItem` allows us to remove the existing `Expr::Spread` case which
was previously used for list spreads. As a consequence, this guarantees
(via the type system) that spreads can only ever occur inside lists,
records, or as command args.
This PR also does a little bit of cleanup in relevant parser code.
# Description
Duration can not be negative, and an underflow causes a panic.
This should fix#12539 as from what I can tell that bug was caused in
`nu-explore:📟:events` from subtracting durations, but I figured
this might be more widespread, and saturating to zero generally makes
sense.
I also added the relevant clippy lint to try to prevent this from
happening in the future. I can't think of a reason we would ever want to
subtract durations without checking first.
cc @fdncred
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
The implementation of this function had a few issues before:
- It didn't check that the `cp` pointer is actually ahead of the `start`
pointer, so `len` could potentially underflow and wrap around, which
would be a violation of memory safety
- It used `Vec::from_raw_parts` even though the buffer is borrowed, not
owned. Although `std::mem::forget` is used later to ensure the
destructor doesn't run, there is a risk that the destructor would run if
a panic happened during `String::from_utf8_unchecked`, which would lead
to a `free()` of a pointer we don't own
Bumps [rmp-serde](https://github.com/3Hren/msgpack-rust) from 1.1.2 to
1.2.0.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/3Hren/msgpack-rust/commits/rmp-serde/v1.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This is good practice as all our iterators will never return a value
after reaching `None`
The benefit should be minimal as only `Iterator::fuse` is directly
specialized and itself rarely used (sometimes in `itertools` adaptors)
Thus it is mostly a documentation thing
# Description
When a closure if provided to `group-by`, errors that occur in the
closure are currently ignored. That is, `group-by` will fall back and
use the `"error"` key if an error occurs. For example, the code snippet
below will group all `ls` entries under the `"error"` column.
```nushell
ls | group-by { get nope }
```
This PR changes `group-by` to instead bubble up any errors triggered
inside the closure. In addition, this PR also does some refactoring and
cleanup inside `group-by`.
# User-Facing Changes
Errors are now returned from the closure provided to `group-by` instead
of falling back to the `"error"` group/key.
# Description
If a panic happens during a plugin call, because it always happens
outside of the main thread, it currently just hangs Nushell because the
plugin stays running without ever producing a response to the call.
This adds a panic handler that calls `exit(1)` after the unwind finishes
to the plugin runner. The panic error is still printed to stderr as
always, and waiting for the unwind to finish helps to ensure that
anything on the stack with `Drop` behavior that needed to run still
runs, at least on that thread.
# User-Facing Changes
Panics now look like this, which is what they looked like before the
plugin behavior was moved to a separate thread:
```
thread 'plugin runner (primary)' panicked at crates/nu_plugin_example/src/commands/main.rs:45:9:
Test panic
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Error: nu:🐚:plugin_failed_to_decode
× Plugin failed to decode: Failed to receive response to plugin call
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
A little refactor that use `working_set.error` rather than
`working_set.parse_errors.push`, which is reported here:
https://github.com/nushell/nushell/pull/12238
> Inconsistent error reporting. Usage of both working_set.error() and
working_set.parse_errors.push(). Using ParseError::Expected for an
invalid variable name when there's ParseError::VariableNotValid (from
parser.rs:5237). Checking variable names manually when there's
is_variable() (from parser.rs:2905).
# User-Facing Changes
NaN
# Tests + Formatting
Done
# Description
Remove a couple of legacy fields (`input_type`, `output_type`), and
`var_id` which is optional and not required for deserialization.
I think until I document this in the plugin protocol ref, most people
will probably be using this example to get started, so it should be as
correct as possible
# After Submitting
- [ ] TODO: document `Signature` in plugin protocol reference
# Description
This is just some cleanup. I moved to_pipeline_data and to_cache_value
to the CustomValueSupport trait, where I should've put them to begin
with.
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
Work for #7149
- **Error `with-env` given uneven count in list form**
- **Fix `with-env` `CantConvert` to record**
- **Error `with-env` when given protected env vars**
- **Deprecate list/table input of vars to `with-env`**
- **Remove examples for deprecated input**
# User-Facing Changes
## Deprecation of the following forms
```
> with-env [MYENV "my env value"] { $env.MYENV }
my env value
> with-env [X Y W Z] { $env.X }
Y
> with-env [[X W]; [Y Z]] { $env.W }
Z
```
## recommended standardized form
```
# Set by key-value record
> with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
╭───┬───╮
│ 0 │ Y │
│ 1 │ Z │
╰───┴───╯
```
## (Side effect) Repeated definitions in an env shorthand are now
disallowed
```
> FOO=bar FOO=baz $env
Error: nu:🐚:column_defined_twice
× Record field or table column used twice: FOO
╭─[entry #1:1:1]
1 │ FOO=bar FOO=baz $env
· ─┬─ ─┬─
· │ ╰── field redefined here
· ╰── field first defined here
╰────
```
# Description
@maxim-uvarov discovered the following error:
```
> [[a b]; [6 2] [1 4] [4 1]] | polars into-lazy | polars sort-by a | polars unique --subset [a]
Error: × Error using as series
╭─[entry #1:1:68]
1 │ [[a b]; [6 2] [1 4] [4 1]] | polars into-lazy | polars sort-by a | polars unique --subset [a]
· ──────┬──────
· ╰── dataframe has more than one column
╰────
```
During investigation, I discovered the root cause was that the lazy frame was incorrectly converted back to a eager dataframe. In order to keep this from happening, I explicitly set that the dataframe did not come from an eager frame. This causes the conversion logic to not attempt to convert the dataframe later in the pipeline.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
Fixes#12520
# User-Facing Changes
Breaking change:
Any operation parsing input with `PWD` to set the environment will now
fail with `ShellError::AutomaticEnvVarSetManually`
Furthermore transactions containing the special env-vars will be
rejected before executing any modifications. Prevoiusly this was
changing valid variables before while leaving valid variables after the
violation untouched.
## `PWD` handling.
Now failing
```
{PWD: "/trolling"} | load-env
```
already failing
```
load-env {PWD: "/trolling"}
```
## Error management
```
> load-env {MY_VAR1: foo, PWD: "/trolling", MY_VAR2: bar}
Error: nu:🐚:automatic_env_var_set_manually
× PWD cannot be set manually.
╭─[entry #1:1:2]
1 │ load-env {MY_VAR1: foo, PWD: "/trolling", MY_VAR2: bar}
· ────┬───
· ╰── cannot set 'PWD' manually
╰────
help: The environment variable 'PWD' is set automatically by Nushell and cannot be set manually.
```
### Before:
```
> $env.MY_VAR1
foo
> $env.MY_VAR2
Error: nu:🐚:name_not_found
....
```
### After:
```
> $env.MY_VAR1
Error: nu:🐚:name_not_found
....
> $env.MY_VAR2
Error: nu:🐚:name_not_found
....
```
# After Submitting
We need to check if any integrations rely on this hack.
# Description
Adds support for running plugins using local socket communication
instead of stdio. This will be an optional thing that not all plugins
have to support.
This frees up stdio for use to make plugins that use stdio to create
terminal UIs, cc @amtoine, @fdncred.
This uses the [`interprocess`](https://crates.io/crates/interprocess)
crate (298 stars, MIT license, actively maintained), which seems to be
the best option for cross-platform local socket support in Rust. On
Windows, a local socket name is provided. On Unixes, it's a path. The
socket name is kept to a relatively small size because some operating
systems have pretty strict limits on the whole path (~100 chars), so on
macOS for example we prefer `/tmp/nu.{pid}.{hash64}.sock` where the hash
includes the plugin filename and timestamp to be unique enough.
This also adds an API for moving plugins in and out of the foreground
group, which is relevant for Unixes where direct terminal control
depends on that.
TODO:
- [x] Generate local socket path according to OS conventions
- [x] Add support for passing `--local-socket` to the plugin executable
instead of `--stdio`, and communicating over that instead
- [x] Test plugins that were broken, including
[amtoine/nu_plugin_explore](https://github.com/amtoine/nu_plugin_explore)
- [x] Automatically upgrade to using local sockets when supported,
falling back if it doesn't work, transparently to the user without any
visible error messages
- Added protocol feature: `LocalSocket`
- [x] Reset preferred mode to `None` on `register`
- [x] Allow plugins to detect whether they're running on a local socket
and can use stdio freely, so that TUI plugins can just produce an error
message otherwise
- Implemented via `EngineInterface::is_using_stdio()`
- [x] Clean up foreground state when plugin command exits on the engine
side too, not just whole plugin
- [x] Make sure tests for failure cases work as intended
- `nu_plugin_stress_internals` added
# User-Facing Changes
- TUI plugins work
- Non-Rust plugins could optionally choose to use this
- This might behave differently, so will need to test it carefully
across different operating systems
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Document local socket option in plugin contrib docs
- [ ] Document how to do a terminal UI plugin in plugin contrib docs
- [ ] Document: `EnterForeground` engine call
- [ ] Document: `LeaveForeground` engine call
- [ ] Document: `LocalSocket` protocol feature
# Description
In the plugin protocol, I had used `#[serde(untagged)]` on the `Stream`
variant to make it smaller and include all of the stream messages at the
top level, but unfortunately this causes serde to make really unhelpful
errors if anything fails to decode anywhere:
```
Error: nu:🐚:plugin_failed_to_decode
× Plugin failed to decode: data did not match any variant of untagged enum PluginOutput
```
If you are trying to develop something using the plugin protocol
directly, this error is incredibly unhelpful. Even as a user, this
basically just says 'something is wrong'. With this change, the errors
are much better:
```
Error: nu:🐚:plugin_failed_to_decode
× Plugin failed to decode: unknown variant `PipelineDatra`, expected one of `Error`, `Signature`, `Ordering`, `PipelineData` at line 2 column 37
```
The only downside is it means I have to duplicate all of the
`StreamMessage` variants manually, but there's only 4 of them and
they're small.
This doesn't actually change the protocol at all - everything is still
identical on the wire.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
When starting the LSP server, the configuration file and environment
file are used to configure the LSP engine unless --no-config-file is
provided.
This PR provides an improvement that is related to #10794
CC: @fdncred
# Description
This adds a `SharedCow` type as a transparent copy-on-write pointer that
clones to unique on mutate.
As an initial test, the `Record` within `Value::Record` is shared.
There are some pretty big wins for performance. I'll post benchmark
results in a comment. The biggest winner is nested access, as that would
have cloned the records for each cell path follow before and it doesn't
have to anymore.
The reusability of the `SharedCow` type is nice and I think it could be
used to clean up the previous work I did with `Arc` in `EngineState`.
It's meant to be a mostly transparent clone-on-write that just clones on
`.to_mut()` or `.into_owned()` if there are actually multiple
references, but avoids cloning if the reference is unique.
# User-Facing Changes
- `Value::Record` field is a different type (plugin authors)
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] use for `EngineState`
- [ ] use for `Value::List`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
* Fixes#12482
* Initial PR failed due to CI issues at the time. Subsequent rebase
failed, so creating new PR.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Use https://github.com/ndjson/ndjson-spec for help links instead of
former spam site
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Link changed for `help to ndjson` and `help from ndjson`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Added a method for getting the base value for a PluginCustomValue.
cc: @devyn
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
From @maxim-uvarov's
[post](https://discord.com/channels/601130461678272522/1227612017171501136/1228656319704203375).
When calling `to-lazy` back to back in a pipeline, an error should not
occur:
```
> [[a b]; [6 2] [1 4] [4 1]] | polars into-lazy | polars into-lazy
Error: nu:🐚:cant_convert
× Can't convert to NuDataFrame.
╭─[entry #1:1:30]
1 │ [[a b]; [6 2] [1 4] [4 1]] | polars into-lazy | polars into-lazy
· ────────┬───────
· ╰── can't convert NuLazyFrameCustomValue to NuDataFrame
╰────
```
This pull request ensures that custom value's of NuLazyFrameCustomValue are properly converted when passed in.
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
Close: #12147Close: #11796
About the change: it make pattern handling into a function:
`ls_for_one_pattern`(for ls), `du_for_one_pattern`(for du). Then
iterates on user input pattern, call these core function, and chaining
these iterator to one pipelinedata.
# Description
- Refactors `first` and `last` using `Vec::truncate` and `Vec::drain`.
- `std::mem::take` was also used to eliminate a few `Value` clones.
- The `NeedsPositiveValue` error now uses the span of the `rows`
argument instead of the call head span.
- `last` now errors on an empty stream to match `first` which does
error.
- Made metadata preservation more consistent.
# User-Facing Changes
Breaking change: `last` now errors on an empty stream to match `first`
which does error.
# Description
@maxim-uvarov discovered an issue with the current implementation. When
executing [[index a]; [1 1]] | polars into-df, a plugin_failed_to_decode
error occurs. This happens because a Record is created with two columns
named "index" as an index column is added during conversion. This pull
request addresses the problem by not adding an index column if there is
already a column named "index" in the dataframe.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
All polars commands that output a file were not handling relative paths
correctly.
A command like
``` [[a b]; [6 2] [1 4] [4 1]] | polars into-df | polars to-parquet foo.json```
was outputting the foo.json to the directory of the plugin executable.
This pull request pulls in nu-path and using it for resolving the file paths.
Related discussion
https://discord.com/channels/601130461678272522/1227612017171501136/1227889870358183966
# User-Facing Changes
None
# Tests + Formatting
Done, added tests for each of the polars to-* commands.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
This bumps nushell to the latest reedline main brach which includes the
new bashism !term.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The `kill` command returns a stream with a single value. This PR changes
it to simply return the value.
# User-Facing Changes
Technically a breaking change.
# Description
Refactors `drop` using `Vec::truncate` and adds a `NeedsPositiveValue`
error.
# User-Facing Changes
Breaking change: `drop` now errors if the number of rows/columns is
negative.
# Description
This PR just adds better logging for shell_integration and tweaks the
ansi escapes so they're closer to where the action happens. I also added
some perf log entries to help better understand plugin file load and
eval performance.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
`polars ls` is already different that `dfr ls`. Currently it just shows
the cache key, columns, rows, and type. I have added:
- creation time
- size
- span contents
- span start and end
<img width="1471" alt="Screenshot 2024-04-10 at 17 27 06"
src="https://github.com/nushell/nushell/assets/56345/545918b7-7c96-4c25-bc01-b9e2b659a408">
# Tests + Formatting
Done
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
The CI has been failing lately on macOS, most likely because it's
running out of memory now that
the `polars` plugin has been included and it's quite large on top of
`dfr`.
This PR just makes use use the `macos-13` runner instead of
`macos-latest` because the latter has
only half as much RAM because it's running on the Apple M1 platform.
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
related to
- https://github.com/nushell/nushell/pull/12196
# Description
while i'm 100% okey with the original intent behind
https://github.com/nushell/nushell/pull/12196, i think the PR did
introduce two unintended things:
- extra parentheses that make the `log.nu` module look like Lisp lol
- a renaming of the `NU_LOG_LEVEL` environment variable to
`NU_log-level`. this breaks previous usage of `std log` and, as it's not
mentionned at all in the PR, i thought it was not intentional 😋
# User-Facing Changes
users can now control `std log` with `$env.NU_LOG_LEVEL`
# Tests + Formatting
the "log" tests have been fixed as well.
# After Submitting
# Description
Fixes: #11996
After this change `let t = timeit ^ls` will list current directory to
stdout.
```
❯ let t = timeit ^ls
CODE_OF_CONDUCT.md Cargo.lock Cross.toml README.md aaa benches devdocs here11 scripts target toolkit.nu wix
CONTRIBUTING.md Cargo.toml LICENSE a.txt assets crates docker rust-toolchain.toml src tests typos.toml
```
If user don't want such behavior, he can redirect the stdout to `std
null-stream` easily
```
> use std
> let t = timeit { ^ls o> (std null-device) }
```
# User-Facing Changes
NaN
# Tests + Formatting
Done
# After Submitting
Nan
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
This is an attempt to isolate the unit tests from whatever might be in
the user's config. If the
user's config is broken in some way or incompatible with this version
(for example, especially if
there are plugins that aren't built for this version), tests can
spuriously fail.
This makes tests more reliably pass the same way they would on CI even
if the user has config, and
should also make them run faster.
I think this is _good enough_, but I still think we should have a
specific config dir env variable for nushell specifically (rather than
having to use `XDG_CONFIG_HOME`, which would mess with other things) and
then we can just have `nu-test-support` set that to a temporary dir
containing the shipped default config files.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
I spent a while trying to come up with a good name for what is currently
`IoStream`. Looking back, this name is not the best, because it:
1. Implies that it is a stream, when it all it really does is specify
the output destination for a stream/pipeline.
2. Implies that it handles input and output, when it really only handles
output.
So, this PR renames `IoStream` to `OutDest` instead, which should be
more clear.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes#7849, #11465 based on @kubouch's suggestion in
https://github.com/nushell/nushell/issues/11465#issuecomment-1883847806.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Can source files relative to `env.nu` or `config.nu` like in #6150.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Adds test that previously failed.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
I have `nu` set as my shell in my editor, which allows me to easily pipe
selections of text to things like `str pascal-case` or even more complex
string operation pipelines, which I find super handy. However, the only
annoying thing is that I pretty much always have to add `| print -n` at
the end, because `nu` adds a newline when it prints the resulting value.
This adds a `--no-newline` option to stop that from happening, and then
you don't need to pipe to `print -n` anymore, you can just have your
shell command for your editor contain that flag.
# User-Facing Changes
- Add `--no-newline` command line option
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
This allows plugins to view the source code of spans.
Requested by @ayax79 for implementing `polars ls`. Note that this won't
really help you find the location of the span. I'm planning to add
another engine call that will return information more similar to what
shows up in the miette diagnostics, with filename / line number / some
context, but I'll want to refactor some of the existing logic to make
that happen, so it was easier to just do this first. I hope this is
enough to at least have something somewhat useful show up for `polars
ls`.
# User-Facing Changes
- Example plugin: added `example view span` command
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Add to plugin protocol reference
Also update the `rust-version` in `Cargo.toml` following the update to
`rust-toolchain.toml` in #12258
# Testing
Added a CI check to verify any future PRs trying to update one will also
have to update the other. (using `std-lib-and-python-virtualenv` job as
this already includes a fresh `nu` binary for a little toml munching
script)
# Description
This PR tries to be a bit more precise with the repl logging when
starting nushell with `nu --log-level debug`. It adds a few more `perf`
lines and changes some of the text of others.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Changed `export` for `import`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
`help stor import` showed a help string that was probably copy-pasted
from `stor export`
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
Now `help stor import` shows a correct description of the operation that
it is doing
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Edits the `echo` help text to mention the `print` command.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
@ayax79 added `nu-cmd-lang` as a dep for `nu-plugin-test-support` in
order to get access to `let`. Since we have the dep anyway now, we might
as well just add all of the lang commands - there aren't very many of
them and it would be less confusing than only `let` working.
# User-Facing Changes
- Can use some more core nu language features in plugin tests, like
loops and `do`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Might need to change something about the plugin testing section of
the book, since I think it says something about there only being the
plugin command itself available
# Description
This decouples the serialized representation of `Record` from its
internal implementation. It now gets treated as a map type in `serde`.
This has several benefits:
- more efficient representation (not showing inner fields)
- human readable e.g. as a JSON record
- no breaking changes when refactoring the `Record` internals in the
future (see #12326, or potential introduction of `indexmap::IndexMap`
for large N)
- we now deny the creation of invalid records a non-cooperating plugin
could produce
- guaranteed key-value correspondence
- checking for unique keys
# Breaking change to the plugin protocol:
Now expects a record/map directly as the `Record.val` field instead of a
serialization of it.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes a problem introduced in
https://github.com/nushell/nushell/pull/12420 where one of the config
path tests (`test_xdg_config_symlink`) fails if, on MacOS, a developer
already has config files in the default location for that platform.
This happened because the test is making sure the
`xdg_config_home_invalid` error isn't reported, but to do that, it
asserts that stderr is empty, which it is not if in the case mentioned
above, because Nushell warns that the default location
(`~/.config`/`~/Library/Application Support`) is not empty but
`XDG_CONFIG_HOME` is empty.
If someone with a Mac could test this, that'd be great.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None, this is for contributors.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The `let` command is needed for many example tests. This pull request
adds the `let` command to the EngineState of Test Plugin.
cc: @devyn
# User-Facing Changes
No user changes. Plugin tests can now have examples with the let
keyword.
Co-authored-by: Jack Wright <jack.wright@disqo.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes#12416. Turns out that in src/main.rs, `XDG_CONFIG_HOME` wasn't
being canonicalized before being compared to `nu_path::config_dir()` to
check if `XDG_CONFIG_HOME` was set to an invalid value. This has been
rectified now.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Setting `XDG_CONFIG_HOME` to a symlink should work now.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I manually tested it and the error has disappeared:
New behavior (this branch):
Old behavior (main):
Thanks to a pointer from Devyn, I've now added tests to make sure the
`xdg_config_home_invalid` error doesn't pop up when `XDG_CONFIG_HOME` is
a symlink (and does when it's actually invalid).
Turns out two of the tests in `test_config_path` tried modifying
`XDG_CONFIG_HOME` using `playground.with_env` but used `nu!`, so the
subprocess didn't actually use the modified value of `XDG_CONFIG_HOME`.
When I added them, I was unaware that the `.with_env` didn't actually
modify the environment. This has now been rectified.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This closes (nushell#10591)
The Command encode's help text says that utf-16le and utf-16be encodings
are not supported, however you could still use these encodings and they
didn't work properly, since they returned the bytes UTF-8 encoded:
```bash
"䆺ש" | encode utf-16
Length: 5 (0x5) bytes | printable whitespace ascii_other non_ascii
00000000: e4 86 ba d7 a9 ×××××
```
# User-Facing Changes
The Command encode's help text was updated and now when trying to encode with utf-16le and utf-16be returns an error:
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Currently, `Range` is a struct with a `from`, `to`, and `incr` field,
which are all type `Value`. This PR changes `Range` to be an enum over
`IntRange` and `FloatRange` for better type safety / stronger compile
time guarantees.
Fixes: #11778Fixes: #11777Fixes: #11776Fixes: #11775Fixes: #11774Fixes: #11773Fixes: #11769.
# User-Facing Changes
Hopefully none, besides bug fixes.
Although, the `serde` representation might have changed.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Resolves#11756.
Resolves#12346.
As per description, shell no longer hangs:
```
~/CodingProjects/nushell> [1 2 3] | select (-2)
Error: nu:🐚:cant_convert
× Can't convert to cell path.
╭─[entry #1:1:18]
1 │ [1 2 3] | select (-2)
· ──┬─
· ╰── can't convert negative number to cell path
╰────
```
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added relevant test 🚀
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Possibly support `get` `get`ting negative numbers, as per #12346
discussion. Alternatively, we can consider adding a cellpath for
negative indexing?
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
I was playing around with auto-cd and realised it didn't check for
permissions before cd'ing. This PR fixes that.
```
~/CodingProjects/nushell> /root
Error: nu:🐚:io_error
× I/O error
help: Cannot change directory to /root: You are neither the owner, in the group, nor the super user and do not have permission
```
This PR also refactors some of the filesystem utilities to nu-utils,
specifically the permissions checking and users.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Some of the tests in `tests::shell` were using `sh` unnecessarily, and
had `#[cfg(not(windows))]` when they should be testable on Windows if
`sh` is not used.
I also found that they were using `.expect()` incorrectly, under the
assumption that that would check their output, when really an
`assert_eq!` on the output is needed to do that. So these tests weren't
even really working properly before.
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
This speeds up writing messages to the plugin, because otherwise every
individual piece of the messages (not even the entire message) is
written with one syscall, leading to a lot of back and forth with the
kernel.
I learned this by running `strace` to debug something and saw a ton of
`write()` calls.
```nushell
# Before
1..10 | each { timeit { example seq 1 10000 | example sum } } | math avg
269ms 779µs 149ns
# After
> 1..10 | each { timeit { example seq 1 10000 | example sum } } | math avg
39ms 636µs 643ns
```
# User-Facing Changes
- Performance improvement
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Requested by @ayax79. This makes the custom value behavior more correct,
by calling the methods on the plugin to handle the custom values in
examples rather than the methods on the custom values themselves. This
helps for handle-type custom values (like what he's doing with
dataframes).
- Equality checking in `PluginTest::test_examples()` changed to use
`PluginInterface::custom_value_partial_cmp()`
- Base value rendering for `PluginSignature` changed to use
`Plugin::custom_value_to_base_value()`
- Had to be moved closer to `serve_plugin` for this reason, so the test
for writing signatures containing custom values was removed
- That behavior should still be tested to some degree, since if custom
values are not handled, signatures will fail to parse, so all of the
other tests won't work.
# User-Facing Changes
- `Record::sort_cols()` method added to share functionality required by
`PartialCmp`, and it might also be slightly faster
- Otherwise, everything should mostly be the same but better. Plugins
that don't implement special handling for custom values will still work
the same way, because the default implementation is just a pass-through
to the `CustomValue` methods.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Because the plugin interface reader thread can be responsible for
sending a drop notification, it's possible for it to end up in a
deadlock where it's waiting for the response to the drop notification
call.
I decided that the best way to address this is to just discard the
response and not wait for it. It's not really important to synchronize
with the response to `Dropped`, so this is probably faster anyway.
cc @ayax79, this is your issue where polars is getting stuck
# User-Facing Changes
- A bug fix
- Custom value plugin: `custom-value handle update` command
# Tests + Formatting
Tried to add a test with a long pipeline with a lot of drops and run it
over and over to reproduce the deadlock.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Encountered repeated build failure that vanished after clearing the
existing build caches.
- Don't `fail-fast` (this is highly annoying, if a severe problem is
detected, there is still the possibility to intervene manually)
- Don't cache the build process, we do it rarely so any potential
speed-up is offset by the uncertainty if this affects the artefact
fixes#12361
Looking at the condition, `TRASH_SUPPORTED && (trash || (rm_always_trash
&& !permanent))`, this code path seems only to run when `--trash` is
enabled and `--permanent` is disabled.
This suggests that the `--trash` suggestion is a mistake and should have
suggested `--permanent`.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Resolves#11800.
```
~/CodingProjects/nushell> def "url expand" [$urls:any = []]: [string -> string, list -> table] {
::: let urls = ($in | default $urls)
::: def expand-link [] {
::: http head --redirect-mode manual $in | where name == location | get value.0
::: }
::: match ($urls | describe) {
::: string => { $urls | expand-link }
::: $type if ($type =~ list) => { $urls | wrap link | insert expanded {|url| $url.link | expand-link}}
::: }
::: }; view source "url expand"
def "url expand" [ $urls: any = [] ]: [string -> string, list<any> -> table] {
let urls = ($in | default $urls)
def expand-link [] {
http head --redirect-mode manual $in | where name == location | get value.0
}
match ($urls | describe) {
string => { $urls | expand-link }
$type if ($type =~ list) => { $urls | wrap link | insert expanded {|url| $url.link | expand-link}}
}
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`view source` now
- adds quotes to commands with spaces
- shows default argument values
- shows type signatures
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
The error message when using `dfr open --type` shows an outdated list of
supported formats.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
User is now informed that jsonl and avro formats are supported.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Done.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
No doc changes.
# Description
This fixes#12391.
nushell/nushell@87c5f6e455 accidentally introduced a bug where the path
was not being properly
expanded according to the cwd. This makes both 'touch' and 'mkdir' use
globs just like the rest of
the commands to preserve tilde behavior while still expanding the paths
properly.
This doesn't actually expand the globs. Should it?
# User-Facing Changes
- Restore behavior of `mkdir`, `touch`
- Help text now says they can take globs, but they won't actually expand
them, maybe this should be changed
# Tests + Formatting
Regression tests added.
# After Submitting
This is severe enough and should be included in the point release.
# Description
Fixes#12382, where overlay changes from hooks were not preserved into
the global state. This was due to creating child stacks for hooks, when
the global stack should have been used instead.
# Description
This keeps plugin custom values that have requested drop notification
around during the lifetime of a plugin call / stream by sending them to
a channel that gets persisted during the lifetime of the call.
Before this change, it was very likely that the drop notification would
be sent before the plugin ever had a chance to handle the value it
received.
Tests have been added to make sure this works - see the `custom_values`
plugin.
cc @ayax79
# User-Facing Changes
This is basically just a bugfix, just a slightly big one.
However, I did add an `as_mut_any()` function for custom values, to
avoid having to clone them. This is a breaking change.
Some platforms don't support the `system-clipboard` feature, notably
termux on android.
The default config currently contained references to `reedline` events
that are only available with the feature enabled (#12179). This thus
broke the out of the box config for those users.
For now be more defensive about this and only enable default events. Add
the alternative as commented out code you can quickly enable.
## Tested with:
```
cargo run --no-default-features --features default-no-clipboard -- --config crates/nu-utils/src/sample_config/default_config.nu
```
- [x] `cargo hack` feature flag compatibility run
- [x] reedline released and pinned
- [x] `nu-plugin-test-support` added to release script
- [x] dependency tree checked
- [x] release notes
# Description
Fixes how the directory permissions are calculated in `mkdir`. Instead
of subtraction, the umask is actually used as a mask via negation
followed by bitwise and with the default mode. This matches how [uucore
calculates](cac7155fba/src/uu/mkdir/src/mkdir.rs (L61))
the mode.
# Description
This shrinks `Record`'s size in half and and allows you to include it in
`Value` without growing the size.
Changing the `Record` internals may have slightly different performance
characteristics as the cache locality changes on lookups (if you
directly need the value, it should be closer, but in other cases may
blow up the cache line budget)
Also different perf characteristics on creation expected.
`Record::from_raw_cols_vals` now probably worse.
## Benchmarking
Comparison with the main branch (boxed Record) revealed no significant
change to the creation but an improvement when accessing larger N.
The fact that this was more pronounced for nested access (still cloning
before nushell/nushell#12325) leads to the conclusion that this may
still be dominated by the smaller clone necessary for a 24-byte `Record`
over the previous 48 bytes.
# User-Facing Changes
Reduced memory usage
# Description
Currently `into bits` will try to coerce a `date`/`Value::Date` into a
string with a locale/timezone specific behavior (See #12268).
To resolve the ambiguity, remove the support for `date` entirely.
# User-Facing Changes
`date now | into bits` will now fail.
Instead you can use `... | format date '%c' | into bits` or any more
specific explicit choices to achieve the same behavior.
As `into bits` has minimal uses (and only pulled out of `extra` with
#12140), this doesn't warrant a deprecation.
# Description
Where possible, this PR replaces usages of raw `libc` bindings to
instead use safe interfaces from the `nix` crate. Where not possible,
the `libc` version reexported through `nix` was used instead of having a
separate `libc` dependency.
# Description
This changes the interface for plugins to always represent errors as
`LabeledError`s. This is good for altlang plugins, as it would suck for
them to have to implement and track `ShellError`. We save a lot of
generated code from the `ShellError` serde impl too, so `nu` and plugins
get to have a smaller binary size.
Reduces the release binary size by 1.2 MiB on my build configuration.
# User-Facing Changes
- Changes plugin protocol. `ShellError` no longer serialized.
- `ShellError` serialize output is different
- `ShellError` no longer deserializes to exactly the same value as
serialized
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Document in plugin protocol reference
Those allocations are all small and insignificant in the grand scheme of
things and the optimizer may be able to resolve some of those but better
to be nice anyways.
Primarily inspired by the new
[`clippy::assigning_clones`](https://rust-lang.github.io/rust-clippy/master/index.html#/assigning_clones)
- **Avoid reallocs with `clone_from` in `nu-parser`**
- **Avoid realloc on assignment in `Stack`**
- **Fix `clippy::assigning_clones` in `nu-cli`**
- **Reuse allocations in `nu-explore` if possible**
# Description
This clone is not necessary and tanks the performance of deep nested
access.
As soon as we found the value, we know we discard the old value, so can
`std::mem::take` the inner (`impl Default for Value` to the rescue)
We may be able to further optimize this but not having to clone the
value is vital.
# Description
This pr is addressing feedback from
https://github.com/nushell/nushell/pull/12277#issuecomment-2027246752
Currently I think it's fine to replace `--legacy` flag with `--guess`
one. Only use `guess_width` algorithm if `--guess` is provided.
# User-Facing Changes
So it won't be a breaking change to previous version.
# Description
In #10232, the allowed input types were changed to be stricter, only
allowing records with types that can easily map onto sqlite equivalents.
Unfortunately, null was left out of the accepted input types, which
makes inserting rows with null values impossible.
This change fixes that by accepting null values as input.
One caveat of this is that when the command is creating a new table, it
uses the first row to infer an appropriate sqlite schema. If the first
row contains a null value, then it is impossible to tell which type this
column is supposed to have.
Throwing a hard error seems undesirable from a UX perspective, but
guessing can lead to a potentially useless database if we guess wrong.
So as a compromise, for null columns, we will assume the sqlite type is
TEXT and print a warning so the user knows. For the time being, if users
can't avoid a first row with null values, but also wants the right
schema, they are advised to create their table before running `into
sqlite`.
A future PR can add the ability to explicitly specify a schema.
Fixes#12225
# Tests + Formatting
* Tests added to cover expected behavior around insertion of null values
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Closes#12253.
Exposes the option as "recursion_limit" under config.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
The config file now has a new option!
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Nothing else...? Do let me know if there's something I've missed!
# Description
Fixes `open --raw file o> out.txt` and other instances where
`PipelineData::ExternalStream` is created from sources that are not
external commands.
# Description
This PR adds a few more `trace!()` and `perf()` statements that allowed
a deeper understanding of the nushell startup process when used with `nu
-n --no-std-lib --log-level trace`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Again avoid uses of the `Record` internals, so we are free to change the
data layout
- **Don't use internals of `Record` in `into sqlite`**
- **Don't use internals of `Record` in `to xml`**
Remaining: `rename`
# User-Facing Changes
None
# Description
This PR reverts sqlparser to 0.39.0. It should stay here until we can
get polars updated so that we don't have to have two versions of
sqlparser.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The second `Value` is redundant and will consume five extra bytes on
each transmission of a custom value to/from a plugin.
# User-Facing Changes
This is a breaking change to the plugin protocol.
The [example in the protocol
reference](https://www.nushell.sh/contributor-book/plugin_protocol_reference.html#value)
becomes
```json
{
"Custom": {
"val": {
"type": "PluginCustomValue",
"name": "database",
"data": [36, 190, 127, 40, 12, 3, 46, 83],
"notify_on_drop": true
},
"span": {
"start": 320,
"end": 340
}
}
}
```
instead of
```json
{
"CustomValue": {
...
}
}
```
# After Submitting
Update plugin protocol reference
# Description
Now we only use `nix 0.28.0`
Achieved by
- updating `ctrlc` to `3.4.4`
- updating `wl-clipboard-rs` to `0.8.1`
- update our own dependency on `nix` from `0.27` to `0.28`
- required fixing uses of `nix::unistd::{tcgetpgrp,tcsetpgrp}`
- now requires an I/O safe file descriptor
- fake one pointing to `libc::STDIN_FILENO` (we were only accessing
`0` previously, dito for fish)
# User-Facing Changes
Better compile times and less to download as source dependencies
# Description
This is something that was discussed in the core team meeting last
Wednesday. @ayax79 is building `nu-plugin-polars` with all of the
dataframe commands into a plugin, and there are a lot of them, so it
would help to make the API more similar. At the same time, I think the
`Command` API is just better anyway. I don't think the difference is
justified, and the types for core commands have the benefit of requiring
less `.into()` because they often don't own their data
- Broke `signature()` up into `name()`, `usage()`, `extra_usage()`,
`search_terms()`, `examples()`
- `signature()` returns `nu_protocol::Signature`
- `examples()` returns `Vec<nu_protocol::Example>`
- `PluginSignature` and `PluginExample` no longer need to be used by
plugin developers
# User-Facing Changes
Breaking API for plugins yet again 😄
Bumps [ical](https://github.com/Peltoche/ical-rs) from 0.10.0 to 0.11.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/Peltoche/ical-rs/releases">ical's
releases</a>.</em></p>
<blockquote>
<h2>v0.11.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Update the version inside the readme by <a
href="https://github.com/Peltoche"><code>@Peltoche</code></a> in <a
href="https://redirect.github.com/Peltoche/ical-rs/pull/58">Peltoche/ical-rs#58</a></li>
<li>Fix <a
href="https://redirect.github.com/Peltoche/ical-rs/issues/62">#62</a> by
<a href="https://github.com/ddnomad"><code>@ddnomad</code></a> in <a
href="https://redirect.github.com/Peltoche/ical-rs/pull/63">Peltoche/ical-rs#63</a></li>
<li>replaced split_line with a multibyte aware version by <a
href="https://github.com/ronnybremer"><code>@ronnybremer</code></a> in
<a
href="https://redirect.github.com/Peltoche/ical-rs/pull/61">Peltoche/ical-rs#61</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/ddnomad"><code>@ddnomad</code></a> made
their first contribution in <a
href="https://redirect.github.com/Peltoche/ical-rs/pull/63">Peltoche/ical-rs#63</a></li>
<li><a
href="https://github.com/ronnybremer"><code>@ronnybremer</code></a>
made their first contribution in <a
href="https://redirect.github.com/Peltoche/ical-rs/pull/61">Peltoche/ical-rs#61</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/Peltoche/ical-rs/compare/v0.10.0...v0.11.0">https://github.com/Peltoche/ical-rs/compare/v0.10.0...v0.11.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="c2f6bb3be9"><code>c2f6bb3</code></a>
chore: Release ical version 0.11.0</li>
<li><a
href="e435769c7b"><code>e435769</code></a>
final fix to test for new split_line</li>
<li><a
href="1db49580e1"><code>1db4958</code></a>
fixed incorrect test for new split_line</li>
<li><a
href="248227b08d"><code>248227b</code></a>
added test case with multibyte characters for split_line</li>
<li><a
href="ba696e5c02"><code>ba696e5</code></a>
take 75 chars of the first line and 74 chars of subsequent lines</li>
<li><a
href="28ffa72bb1"><code>28ffa72</code></a>
replaced split_line with a multibyte aware version</li>
<li><a
href="a10a15d571"><code>a10a15d</code></a>
Fix <a
href="https://redirect.github.com/Peltoche/ical-rs/issues/62">#62</a></li>
<li><a
href="7f93147560"><code>7f93147</code></a>
Update the version inside the readme</li>
<li>See full diff in <a
href="https://github.com/Peltoche/ical-rs/compare/v0.10.0...v0.11.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [rayon](https://github.com/rayon-rs/rayon) from 1.9.0 to 1.10.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rayon-rs/rayon/blob/main/RELEASES.md">rayon's
changelog</a>.</em></p>
<blockquote>
<h1>Release rayon 1.10.0 (2024-03-23)</h1>
<ul>
<li>The new methods <code>ParallelSlice::par_chunk_by</code> and
<code>ParallelSliceMut::par_chunk_by_mut</code> work like the slice
methods <code>chunk_by</code>
and <code>chunk_by_mut</code> added in Rust 1.77.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="4a6e9bf6f3"><code>4a6e9bf</code></a>
Merge <a
href="https://redirect.github.com/rayon-rs/rayon/issues/991">#991</a></li>
<li><a
href="b0008f31b1"><code>b0008f3</code></a>
Release rayon 1.6.0 / rayon-core 1.10.0</li>
<li><a
href="c2dfa5c868"><code>c2dfa5c</code></a>
Merge <a
href="https://redirect.github.com/rayon-rs/rayon/issues/990">#990</a></li>
<li><a
href="17f5b08bb3"><code>17f5b08</code></a>
fix typo</li>
<li><a
href="ca9b279d83"><code>ca9b279</code></a>
Merge <a
href="https://redirect.github.com/rayon-rs/rayon/issues/989">#989</a></li>
<li><a
href="a119f2323a"><code>a119f23</code></a>
Unify <code>chunks</code>, <code>fold_chunks</code>, and
<code>fold_chunks_with</code></li>
<li><a
href="911d6d098c"><code>911d6d0</code></a>
Merge <a
href="https://redirect.github.com/rayon-rs/rayon/issues/492">#492</a></li>
<li><a
href="9ef85cd5d8"><code>9ef85cd</code></a>
Add some documentation about <em>when</em> broadcasts run</li>
<li><a
href="bd7b61ca8b"><code>bd7b61c</code></a>
Add more internal enforcement of static/scope lifetimes</li>
<li><a
href="812ca025ae"><code>812ca02</code></a>
Simplify calls that use the panic_handler</li>
<li>Additional commits viewable in <a
href="https://github.com/rayon-rs/rayon/compare/rayon-core-v1.9.0...rayon-core-v1.10.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
When implementing a `Command`, one must also import all the types
present in the function signatures for `Command`. This makes it so that
we often import the same set of types in each command implementation
file. E.g., something like this:
```rust
use nu_protocol::ast::Call;
use nu_protocol::engine::{Command, EngineState, Stack};
use nu_protocol::{
record, Category, Example, IntoInterruptiblePipelineData, IntoPipelineData, PipelineData,
ShellError, Signature, Span, Type, Value,
};
```
This PR adds the `nu_engine::command_prelude` module which contains the
necessary and commonly used types to implement a `Command`:
```rust
// command_prelude.rs
pub use crate::CallExt;
pub use nu_protocol::{
ast::{Call, CellPath},
engine::{Command, EngineState, Stack},
record, Category, Example, IntoInterruptiblePipelineData, IntoPipelineData, IntoSpanned,
PipelineData, Record, ShellError, Signature, Span, Spanned, SyntaxShape, Type, Value,
};
```
This should reduce the boilerplate needed to implement a command and
also gives us a place to track the breadth of the `Command` API. I tried
to be conservative with what went into the prelude modules, since it
might be hard/annoying to remove items from the prelude in the future.
Let me know if something should be included or excluded.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Binary values passed to `table` may or may not be pretty formatted based
on the output destination. This leads to weird behavior as documented in
#12287. This PR changes `table` to always pretty print binary values.
However, binary values passed to external commands will not be formatted
(this is the existing behavior).
# User-Facing Changes
This is a breaking change. E.g.:
```nushell
0x[8989] | table | cat -
```
used to print raw bytes, but it will now print the pretty formatted
bytes.
# After Submitting
Add to 0.92.0 release notes and update documentation.
Tables are the most common "large" data structures Nushell itself
creates. Benchmarking them and their common operations are central
- Creation via the explicit `[[]; [] []]` literal syntax
- `get` Access (`math sum` to guarantee consumption)
- `select` Slicing by columns
Currently low column count and high row count as the default example.
Future benchmarks should diversify this and provide tables with
irregular column order/presence (as this is currently allowed but rare
and requires extra bookkeeping in different commands)
# Description
Closes https://github.com/nushell/nushell/issues/12257
This was down to the use of `eval_block` instead of
`eval_block_with_early_return`. We may want to reconsider how we
differentiate between this behavior. We currently need to check all the
remaining commands that can invoke a closure block, if they properly
handle `ShellError::Return` as a passing of a `Value`
- **Add test for `return` in `filter` closure**
- **Fix use of `return` in `filter` closure**
# User-Facing Changes
You can now return a value from a `filter` closure
# Tests + Formatting
Regression test
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Boxes `Record` inside `Value` to reduce memory usage, `Value` goes from
`72` -> `56` bytes after this change.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
@fdncred found another histogram based algorithm to detect columns, and
rewrite it in rust: https://github.com/fdncred/guess-width
I have tested it manually, and it works good with `df`, `docker ps`,
`^ps`. This pr is going to use the algorithm in `detect columns`
Fix: #4183
The pitfall of new algorithm:
1. it may not works well if there isn't too much rows of input
2. it may not works well if the length of value is less than the header
to value, e.g:
```
c1 c2 c3 c4 c5
a b c d e
g h i j k
g a a q d
a v c q q | detect columns
```
In this case, users might need to use ~~`--old`~~ `--legacy` to make it
works well.
# User-Facing Changes
User might need to add ~~`--old`~~ `--legacy` to scripts if they find
`detect columns` in their scripts broken.
# Tests + Formatting
Done
# After Submitting
NaN
# Description
Uses the new `nu-plugin-test-support` crate to test the examples of
commands provided by plugins in the repo.
Also fixed some of the examples to pass.
# User-Facing Changes
- Examples that are more guaranteed to work
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Fixes#12280.
# Description
This removes the dependency on the `difference` crate, which is
unmaintained, for `nu-plugin-test-support`. The `similar` crate
(Apache-2.0) is used instead, which is a bit larger and more complex,
but still suitable for a dev dep for tests. Also switched to use
`crossterm` for colors, since `similar` doesn't come with any terminal
pretty printing functionality.
# User-Facing Changes
None - output should be identical.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Cleanup search terms and help usage to be consistent and include
coreutils so people can easily find out which commands are coreutils.
or
```nushell
help commands | where usage =~ coreutils | reject params input_output
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Hi,
This PR aims at implementing the first iteration for `uname` using
`uutils`. Couple of things:
* Currently my [PR](https://github.com/uutils/coreutils/pull/5921) to
make the required changes is pending in `uutils` repo.
* I guess the number of flags has to be investigated. Still the tests
cover all of them.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [X] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Fixes: #11887Fixes: #11626
This pr unify the tilde expand behavior over several filesystem relative
commands. It follows the same rule with glob expansion:
| command | result |
| ----------- | ------ |
| ls ~/aaa | expand tilde
| ls "~/aaa" | don't expand tilde
| let f = "~/aaa"; ls $f | don't expand tilde, if you want to: use `ls
($f \| path expand)`
| let f: glob = "~/aaa"; ls $f | expand tilde, they don't expand on
`mkdir`, `touch` comamnd.
Actually I'm not sure for 4th item, currently it's expanding is just
because it followes the same rule with glob expansion.
### About the change
It changes `expand_path_with` to accept a new argument called
`expand_tilde`, if it's true, expand it, if not, just keep it as `~`
itself.
# User-Facing Changes
After this change, `ls "~/aaa"` won't expand tilde.
# Tests + Formatting
Done
# Description
This commit fills in the completion item kind into the
`textDocument/completion` response so that LSP client can present more
information to the user.
It is an improvement in the context of #10794
# User-Facing Changes
Improved information display in editor's intelli-sense menu
# Description
This PR adds a `--params` param to `query db`. This closes#11643.
You can't combine both named and positional parameters, I think this
might be a limitation with rusqlite itself. I tried using named
parameters with indices like `{ ':named': 123, '1': "positional" }` but
that always failed with a rusqlite error. On the flip side, the other
way around works: for something like `VALUES (:named, ?)`, you can treat
both as positional: `-p [hello 123]`.
This PR introduces some very gnarly code repetition in
`prepared_statement_to_nu_list`. I tried, I swear; the compiler wasn't
having any of it, it kept telling me to box my closures and then it said
that the reference lifetimes were incompatible in the match arms. I gave
up and put the mapping code in the match itself, but I'm still not
happy.
Another thing I'm unhappy about: I don't like how you have to put the
`:colon` in named parameters. I think nushell should insert it if it's
[missing](https://www.sqlite.org/lang_expr.html#parameters). But this is
the way [rusqlite
works](https://docs.rs/rusqlite/latest/rusqlite/trait.Params.html#example-named),
so for now, I'll let it be consistent. Just know that it's not really a
blocker, and it isn't a compatibility change to later make `{ colon: 123
}` work, without the quotes and `:`. This would require allocating and
turning our pretty little `&str` into a `String`, though
# User-Facing Changes
Less incentive to leave yourself open to SQL injection with statements
like `query db $"INSERT INTO x VALUES \($unsafe_user_input)"`.
Additionally, the `$""` syntax being annoying with parentheses plays in
our favor, making users even more likely to use ? with `--params`.
# Tests + Formatting
Hehe
# Description
The hover was bugged with 3 backticks. I don't understand how it worked
before, but this apparently now works correctly on my machine. This is
really puzzling. My next step is to make a test to assert this will
break a little less. I fixed it 3 times in the past
# Tests + Formatting
Added a test to be sure this doesn't breaks again 😄 (at least from
nushell/nushell side)
# Description
@WindSoilder [reported on
Discord](https://discord.com/channels/601130461678272522/855947301380947968/1221233630093901834)
that some plugin stream tests have been failing on the CI. It seems to
just be a timing thing (probably due to busy CI), so this extends the
amount of time that we can wait for a condition to be true.
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
There wasn't really a good way to implement a command group style (e.g.
`from`, `query`, etc.) command in the past that just returns the help
text even if `--help` is not passed. This adds a new engine call that
just does that.
This is actually something I ran into before when developing the dbus
plugin, so it's nice to fix it.
# User-Facing Changes
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Document `GetHelp` engine call in proto
# Description
Adds a `nu-plugin-test-support` crate with an interface that supports
testing plugins.
Unlike in reality, these plugins run in the same process on separate
threads. This will allow
testing aspects of the plugin internal state and handling serialized
plugin custom values easily.
We still serialize their custom values and all of the engine to plugin
logic is still in play, so
from a logical perspective this should still expose any bugs that would
have been caused by that.
The only difference is that it doesn't run in a different process, and
doesn't try to serialize
everything to the final wire format for stdin/stdout.
TODO still:
- [x] Clean up warnings about private types exposed in trait definition
- [x] Automatically deserialize plugin custom values in the result so
they can be inspected
- [x] Automatic plugin examples test function
- [x] Write a bit more documentation
- [x] More tests
- [x] Add MIT License file to new crate
# User-Facing Changes
Plugin developers get a nice way to test their plugins.
# Tests + Formatting
Run the tests with `cargo test -p nu-plugin-test-support --
--show-output` to see some examples of what the failing test output for
examples can look like. I used the `difference` crate (MIT licensed) to
make it look nice.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Add a section to the book about testing
- [ ] Test some of the example plugins this way
- [ ] Add example tests to nu_plugin_template so plugin developers have
something to start with
# Description
Just a bunch of miscellaneous fixes to the Rust documentation that I
found recently while doing
a pass on some things.
# User-Facing Changes
None
Bumps [base64](https://github.com/marshallpierce/rust-base64) from
0.21.7 to 0.22.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/marshallpierce/rust-base64/blob/master/RELEASE-NOTES.md">base64's
changelog</a>.</em></p>
<blockquote>
<h1>0.22.0</h1>
<ul>
<li><code>DecodeSliceError::OutputSliceTooSmall</code> is now
conservative rather than precise. That is, the error will only occur if
the decoded output <em>cannot</em> fit, meaning that
<code>Engine::decode_slice</code> can now be used with exactly-sized
output slices. As part of this, <code>Engine::internal_decode</code> now
returns <code>DecodeSliceError</code> instead of
<code>DecodeError</code>, but that is not expected to affect any
external callers.</li>
<li><code>DecodeError::InvalidLength</code> now refers specifically to
the <em>number of valid symbols</em> being invalid (i.e. <code>len % 4
== 1</code>), rather than just the number of input bytes. This avoids
confusing scenarios when based on interpretation you could make a case
for either <code>InvalidLength</code> or <code>InvalidByte</code> being
appropriate.</li>
<li>Decoding is somewhat faster (5-10%)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="5d70ba7576"><code>5d70ba7</code></a>
Merge pull request <a
href="https://redirect.github.com/marshallpierce/rust-base64/issues/269">#269</a>
from marshallpierce/mp/decode-precisely</li>
<li><a
href="efb6c006c7"><code>efb6c00</code></a>
Release notes</li>
<li><a
href="2b91084a31"><code>2b91084</code></a>
Add some tests to boost coverage</li>
<li><a
href="9e9c7abe65"><code>9e9c7ab</code></a>
Engine::internal_decode now returns DecodeSliceError</li>
<li><a
href="a8a60f43c5"><code>a8a60f4</code></a>
Decode main loop improvements</li>
<li><a
href="a25be0667c"><code>a25be06</code></a>
Simplify leftover output writes</li>
<li><a
href="9979cc33bb"><code>9979cc3</code></a>
Keep morsels as separate bytes</li>
<li><a
href="37670c5ec2"><code>37670c5</code></a>
Bump dev toolchain version (<a
href="https://redirect.github.com/marshallpierce/rust-base64/issues/268">#268</a>)</li>
<li>See full diff in <a
href="https://github.com/marshallpierce/rust-base64/compare/v0.21.7...v0.22.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [heck](https://github.com/withoutboats/heck) from 0.4.1 to 0.5.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/withoutboats/heck/blob/master/CHANGELOG.md">heck's
changelog</a>.</em></p>
<blockquote>
<h1>0.5.0</h1>
<ul>
<li>Add <code>no_std</code> support.</li>
<li>Remove non-additive <code>unicode</code> feature. The library now
uses <code>char::is_alphanumeric</code>
instead of the <code>unicode-segmentation</code> library to determine
word boundaries in all cases.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/withoutboats/heck/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
you can also mention related issues, PRs or discussions!
-->
- fixes#11014
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
When the `command_not_found` hook is entered, we set an environment
variable for context. If an unknown command is encountered and the
`command_not_found` context environment variable is already present, it
implies a command in the hook closure is also not found. We stop the
recursion right there.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Incorrect `command_not_found` hooks can be caught without panicking.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests are passing.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
With the release of Rust 1.77.0 today we're able to bump the
rust-toolchain for nushell to 1.75.0.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Manual checks are added to `parse_let`, `parse_mut`, and `parse_const`.
`parse_var_with_opt_type` is also fixed to update `spans_idx` correctly.
Fixes#12125.
It's technically a fix, but I'd rather not merge this directly. I'm
making this PR to bring into attention the code quality of the parser
code. For example:
* Inconsistent usage of `spans_idx`. What is its purpose, and which
parsing functions need it? I suspect it's possible to remove the usage
of `spans_idx` entirely.
* Lacking documentation for top-level functions. What does `mutable`
mean for `parse_var_with_opt_type()`?
* Inconsistent error reporting. Usage of both `working_set.error()` and
`working_set.parse_errors.push()`. Using `ParseError::Expected` for an
invalid variable name when there's `ParseError::VariableNotValid` (from
`parser.rs:5237`). Checking variable names manually when there's
`is_variable()` (from `parser.rs:2905`).
* `span()` is a terrible name for a function that flattens a bunch of
spans into one (from `nu-protocal/src/span.rs:92`). The top-level
comment (`Used when you have a slice of spans of at least size 1`)
doesn't help either.
I've only looked at a small portion of the parser code; I expect there
are a lot more. These issues made it much harder to fix a simple bug
like #12125. I believe we should invest some effort to cleanup the
parser code, which will ease maintainance in the future. I'll willing to
help if there is interest.
# Description
This makes `LabeledError` much more capable of representing close to
everything a `miette::Diagnostic` can, including `ShellError`, and
allows plugins to generate multiple error spans, codes, help, etc.
`LabeledError` is now embeddable within `ShellError` as a transparent
variant.
This could also be used to improve `error make` and `try/catch` to
reflect `LabeledError` exactly in the future.
Also cleaned up some errors in existing plugins.
# User-Facing Changes
Breaking change for plugins. Nicer errors for users.
fixes#11900
# Description
Use `serde_json` instead.
# User-Facing Changes
The problem described in the issue now no longer persists.
No whitespace in the output of `to json --raw`
Output of unicode escape changed to consistent `\uffff`
# Tests + Formatting
I corrected all Tests that were affected by this change.
# Description
@sholderbach left a very helpful review and this just implements the
suggestions he made.
Didn't notice any difference in performance, but there could potentially
be for a long running Nushell session or one that loads a lot of stuff.
I also caught a bug where nu-protocol won't build without `plugin`
because of the previous conditional import. Oops. Fixed.
# User-Facing Changes
`blocks` and `modules` type in `EngineState` changed again. Shouldn't
affect plugins or anything else though really
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
Get rid of two parallel `Vec`s in `StateDelta` and `EngineState`, that
also duplicated span information. Use a struct with documenting fields.
Also use `Arc<str>` and `Arc<[u8]>` for the allocations as they are
never modified and cloned often (see #12229 for the first improvement).
This also makes the representation more compact as no capacity is
necessary.
# User-Facing Changes
API breakage on `EngineState`/`StateWorkingSet`/`StateDelta` that should
not really affect plugin authors.
closes#12115
# Description
This fix addresses a bug where the --tabs flag couldn't be utilized due
to improper handling of the tab quantity provided by the user.
Previously, the code mistakenly attempted to convert the tab quantity to
a boolean value, leading to a conversion error. The resolution involves
adjusting the condition clauses to properly validate the presence of the
flag's value. Now, the code checks whether the get_flag() function
returns a value or None associated with the --tabs flag. This adjustment
enables the --tabs flag to function correctly, triggering the
appropriate condition and allowing the conversion to proceed as
expected. Similarly, the fix applies to the --indent flag. Additionally,
a default case was added, and the conversion now works properly without
flags. Two tests were added to validate the corrected behavior of these
flags.
# User-Facing Changes
Now the conversion should work properly instead of displaying an error.
# Tests + Formatting
-🟢 toolkit fmt
-🟢 toolkit clippy
-🟢 toolkit test
-🟢 toolkit test stdlib
To run added tests:
- cargo test --package nu-command --test main --
format_conversions::json::test_tabs_indent_flag
- cargo test --package nu-command --test main --
format_conversions::json::test_indent_flag
# Description
It was a bit ugly that when new `EngineCall`s or response types were
added, they needed to be added to multiple places with redundant code
just to change the types, even if they didn't have any stream content.
This fixes that and locates all of that logic in one place.
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Improves the accuracy of sleep when the duration is larger than 100ms.
Fixes#12223.
# User-Facing Changes
Sleeping for 150ms should work now.
```nushell
~/nushell> timeit { sleep 150ms } 03/19/2024 10:41:55 AM AM
151ms 344µs 201ns
```
# Description
This makes many of the larger objects in `EngineState` into `Arc`, and
uses `Arc::make_mut` to do clone-on-write if the reference is not
unique. This is generally very cheap, giving us the best of both worlds
- allowing us to mutate without cloning if we have an exclusive
reference, and cloning if we don't.
This started as more of a curiosity for me after remembering that
`Arc::make_mut` exists and can make using `Arc` for mostly immutable
data that sometimes needs to be changed very convenient, and also after
hearing someone complain about memory usage on Discord - this is a
somewhat significant win for that.
The exact objects that were wrapped in `Arc`:
- `files`, `file_contents` - the strings and byte buffers
- `decls` - the whole `Vec`, but mostly to avoid lots of individual
`malloc()` calls on Clone rather than for memory usage
- `blocks` - the blocks themselves, rather than the outer Vec
- `modules` - the modules themselves, rather than the outer Vec
- `env_vars`, `previous_env_vars` - the entire maps
- `config`
The changes required were relatively minimal, but this is a breaking API
change. In particular, blocks are added as Arcs, to allow the parser
cache functionality to work.
With my normal nu config, running on Linux, this saves me about 15 MiB
of process memory usage when running interactively (65 MiB → 50 MiB).
This also makes quick command executions cheaper, particularly since
every REPL loop now involves a clone of the engine state so that we can
recover from a panic. It also reduces memory usage where engine state
needs to be cloned and sent to another thread or kept within an
iterator.
# User-Facing Changes
Shouldn't be any, since it's all internal stuff, but it does change some
public interfaces so it's a breaking change
# Description
As suggested by @WindSoilder, since plugins can now contain both simple
commands that produce `Value` and commands that produce `PipelineData`
without having to choose one or the other for the whole plugin, this
change merges `stream_example` into `example`.
# User-Facing Changes
All of the example plugins are renamed.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Check nushell/nushell.github.io for any docs that match the
command names changed
[Context on
Discord](https://discord.com/channels/601130461678272522/855947301380947968/1219425984990806207)
# Description
- Rename `CustomValue::value_string()` to `type_name()` to reflect its
usage better.
- Change print behavior to always call `to_base_value()` first, to give
the custom value better control over the output.
- Change `describe --detailed` to show the type name as the subtype,
rather than trying to describe the base value.
- Change custom `Type` to use `type_name()` rather than `typetag_name()`
to make things like `PluginCustomValue` more transparent
One question: should `describe --detailed` still include a description
of the base value somewhere? I'm torn on it, it seems possibly useful
for some things (maybe sqlite databases?), but having `describe -d` not
include the custom type name anywhere felt weird. Another option would
be to add another method to `CustomValue` for info to be displayed in
`describe`, so that it can be more type-specific?
# User-Facing Changes
Everything above has implications for printing and `describe` on custom
values
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Context: @abusch is working on a semver plugin with custom values and
wants users to be able to convert them back to strings
# Description
This allows `into string` to work on custom values if their base value
representation could be converted into a string with the same rules.
# User-Facing Changes
`into string` works on custom values.
Unfortunately, I couldn't really demo this with an example, because
there aren't any custom values that can be represented that way
included.
# Tests + Formatting
I was able to write a test using the custom values plugin.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Fixes#12057 where it was pointed out that `export use` takes an
**optional** `members` positional argument whereas `use` takes a
**rest** `members` argument.
# Description
@ayax79 says that the dataframe commands all have dataframe custom
values in their examples, and they're used for tests.
Rather than send the custom values to the engine, if they're in
examples, this change just renders them using `to_base_value()` first.
That way we avoid potentially having to hold onto custom values in
`plugins.nu` that might not be valid indefinitely - as will be the case
for dataframes in particular - but we still avoid forcing plugin writers
to not use custom values in their examples.
# User-Facing Changes
- Custom values usable in plugin examples
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
# Description
`help zip` now reports:
```
other <one_of(any, closure())>: The other input, or closure returning a stream.
```
Thanks to @edhowland for pointing this out ❤️
# User-Facing Changes
- Doc change for zip
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
# Description
We do a lot of visiting contained values in the serialization / validity
functions within `PluginCustomValue` utils. This adds
`Value::recurse_mut()` which wraps up most of that logic into something
that can be reused.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
With the introduction of the system clipboard to nushell, many commands
changed their behavior from using a local cut buffer to the system
clipboard, perhaps surprisingly for many users. (See #11907)
This PR changes most of them back to using the local cut buffer and
introduces three commands (`CutSelectionSystem`, `CopySelectionSystem`
and `PasteSystem`) to explicitly use the system clipboard.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users who in the meantime already used the system clipboard now default
back to the local clipboard. To be able to use the system clipboard
again they have to append the suffix `system` to their current edit
command specified in their keybindings.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
The commands themselves are tested in `reedline`. The changes introduces
in nushell are minimal and simply forward from a match on the keybinding
name to the command.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Adds the `AddEnvVar` plugin call, which allows plugins to set
environment variables in the caller's scope. This is the first engine
call that mutates the caller's stack, and opens the door to more
operations like this if needed.
This also comes with an extra benefit: in doing this, I needed to
refactor how context was handled, and I was able to avoid cloning
`EngineInterface` / `Stack` / `Call` in most cases that plugin calls are
used. They now only need to be cloned if the plugin call returns a
stream. The performance increase is welcome (5.5x faster on `inc`!):
```nushell
# Before
> timeit { 1..100 | each { |i| $"2.0.($i)" | inc -p } }
405ms 941µs 952ns
# After
> timeit { 1..100 | each { |i| $"2.0.($i)" | inc -p } }
73ms 68µs 749ns
```
# User-Facing Changes
- New engine call: `add_env_var()`
- Performance enhancement for plugin calls
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [x] Document env manipulation in plugins guide
- [x] Document `AddEnvVar` in plugin protocol
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
With this change, `mkdir` mirrors coreutils works. Closes#12161
I referred to the implementation of `mkdir` in uutils/coreutils. I add
`uucore` required for implementation to dependencies. Since `uucore` is
already included in dependencies of `uu_mkdir`, I don't think there will
be any additional dependencies.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Directories are created according to `umask` except for Windows.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I add `mkdir` test considering permissions. The test assumes that the
default `umask` is `022`.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes#12193 where the `$in` value may be null for closures provided to
`insert`.
# User-Facing Changes
The `$in` value will now always be the same as the closure parameter for
`insert`.
[Context on
Discord](https://discord.com/channels/601130461678272522/855947301380947968/1216517833312309419)
# Description
This is a significant breaking change to the plugin API, but one I think
is worthwhile. @ayax79 mentioned on Discord that while trying to start
on a dataframes plugin, he was a little disappointed that more wasn't
provided in terms of code organization for commands, particularly since
there are *a lot* of `dfr` commands.
This change treats plugins more like miniatures of the engine, with
dispatch of the command name being handled inherently, each command
being its own type, and each having their own signature within the trait
impl for the command type rather than having to find a way to centralize
it all into one `Vec`.
For the example plugins that have multiple commands, I definitely like
how this looks a lot better. This encourages doing code organization the
right way and feels very good.
For the plugins that have only one command, it's just a little bit more
boilerplate - but still worth it, in my opinion.
The `Box<dyn PluginCommand<Plugin = Self>>` type in `commands()` is a
little bit hairy, particularly for Rust beginners, but ultimately not so
bad, and it gives the desired flexibility for shared state for a whole
plugin + the individual commands.
# User-Facing Changes
Pretty big breaking change to plugin API, but probably one that's worth
making.
```rust
use nu_plugin::*;
use nu_protocol::{PluginSignature, PipelineData, Type, Value};
struct LowercasePlugin;
struct Lowercase;
// Plugins can now have multiple commands
impl PluginCommand for Lowercase {
type Plugin = LowercasePlugin;
// The signature lives with the command
fn signature(&self) -> PluginSignature {
PluginSignature::build("lowercase")
.usage("Convert each string in a stream to lowercase")
.input_output_type(Type::List(Type::String.into()), Type::List(Type::String.into()))
}
// We also provide SimplePluginCommand which operates on Value like before
fn run(
&self,
plugin: &LowercasePlugin,
engine: &EngineInterface,
call: &EvaluatedCall,
input: PipelineData,
) -> Result<PipelineData, LabeledError> {
let span = call.head;
Ok(input.map(move |value| {
value.as_str()
.map(|string| Value::string(string.to_lowercase(), span))
// Errors in a stream should be returned as values.
.unwrap_or_else(|err| Value::error(err, span))
}, None)?)
}
}
// Plugin now just has a list of commands, and the custom value op stuff still goes here
impl Plugin for LowercasePlugin {
fn commands(&self) -> Vec<Box<dyn PluginCommand<Plugin=Self>>> {
vec![Box::new(Lowercase)]
}
}
fn main() {
serve_plugin(&LowercasePlugin{}, MsgPackSerializer)
}
```
Time this however you like - we're already breaking stuff for 0.92, so
it might be good to do it now, but if it feels like a lot all at once,
it could wait.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Update examples in the book
- [x] Fix#12088 to match - this change would actually simplify it a
lot, because the methods are currently just duplicated between `Plugin`
and `StreamingPlugin`, but they only need to be on `Plugin` with this
change
# Description
The PR overhauls how IO redirection is handled, allowing more explicit
and fine-grain control over `stdout` and `stderr` output as well as more
efficient IO and piping.
To summarize the changes in this PR:
- Added a new `IoStream` type to indicate the intended destination for a
pipeline element's `stdout` and `stderr`.
- The `stdout` and `stderr` `IoStream`s are stored in the `Stack` and to
avoid adding 6 additional arguments to every eval function and
`Command::run`. The `stdout` and `stderr` streams can be temporarily
overwritten through functions on `Stack` and these functions will return
a guard that restores the original `stdout` and `stderr` when dropped.
- In the AST, redirections are now directly part of a `PipelineElement`
as a `Option<Redirection>` field instead of having multiple different
`PipelineElement` enum variants for each kind of redirection. This
required changes to the parser, mainly in `lite_parser.rs`.
- `Command`s can also set a `IoStream` override/redirection which will
apply to the previous command in the pipeline. This is used, for
example, in `ignore` to allow the previous external command to have its
stdout redirected to `Stdio::null()` at spawn time. In contrast, the
current implementation has to create an os pipe and manually consume the
output on nushell's side. File and pipe redirections (`o>`, `e>`, `e>|`,
etc.) have precedence over overrides from commands.
This PR improves piping and IO speed, partially addressing #10763. Using
the `throughput` command from that issue, this PR gives the following
speedup on my setup for the commands below:
| Command | Before (MB/s) | After (MB/s) | Bash (MB/s) |
| --------------------------- | -------------:| ------------:|
-----------:|
| `throughput o> /dev/null` | 1169 | 52938 | 54305 |
| `throughput \| ignore` | 840 | 55438 | N/A |
| `throughput \| null` | Error | 53617 | N/A |
| `throughput \| rg 'x'` | 1165 | 3049 | 3736 |
| `(throughput) \| rg 'x'` | 810 | 3085 | 3815 |
(Numbers above are the median samples for throughput)
This PR also paves the way to refactor our `ExternalStream` handling in
the various commands. For example, this PR already fixes the following
code:
```nushell
^sh -c 'echo -n "hello "; sleep 0; echo "world"' | find "hello world"
```
This returns an empty list on 0.90.1 and returns a highlighted "hello
world" on this PR.
Since the `stdout` and `stderr` `IoStream`s are available to commands
when they are run, then this unlocks the potential for more convenient
behavior. E.g., the `find` command can disable its ansi highlighting if
it detects that the output `IoStream` is not the terminal. Knowing the
output streams will also allow background job output to be redirected
more easily and efficiently.
# User-Facing Changes
- External commands returned from closures will be collected (in most
cases):
```nushell
1..2 | each {|_| nu -c "print a" }
```
This gives `["a", "a"]` on this PR, whereas this used to print "a\na\n"
and then return an empty list.
```nushell
1..2 | each {|_| nu -c "print -e a" }
```
This gives `["", ""]` and prints "a\na\n" to stderr, whereas this used
to return an empty list and print "a\na\n" to stderr.
- Trailing new lines are always trimmed for external commands when
piping into internal commands or collecting it as a value. (Failure to
decode the output as utf-8 will keep the trailing newline for the last
binary value.) In the current nushell version, the following three code
snippets differ only in parenthesis placement, but they all also have
different outputs:
1. `1..2 | each { ^echo a }`
```
a
a
╭────────────╮
│ empty list │
╰────────────╯
```
2. `1..2 | each { (^echo a) }`
```
╭───┬───╮
│ 0 │ a │
│ 1 │ a │
╰───┴───╯
```
3. `1..2 | (each { ^echo a })`
```
╭───┬───╮
│ 0 │ a │
│ │ │
│ 1 │ a │
│ │ │
╰───┴───╯
```
But in this PR, the above snippets will all have the same output:
```
╭───┬───╮
│ 0 │ a │
│ 1 │ a │
╰───┴───╯
```
- All existing flags on `run-external` are now deprecated.
- File redirections now apply to all commands inside a code block:
```nushell
(nu -c "print -e a"; nu -c "print -e b") e> test.out
```
This gives "a\nb\n" in `test.out` and prints nothing. The same result
would happen when printing to stdout and using a `o>` file redirection.
- External command output will (almost) never be ignored, and ignoring
output must be explicit now:
```nushell
(^echo a; ^echo b)
```
This prints "a\nb\n", whereas this used to print only "b\n". This only
applies to external commands; values and internal commands not in return
position will not print anything (e.g., `(echo a; echo b)` still only
prints "b").
- `complete` now always captures stderr (`do` is not necessary).
# After Submitting
The language guide and other documentation will need to be updated.
# Description
I get warnings message when running tests:
```
warning: unused import: `Feature`
--> crates/nu-plugin/src/protocol/mod.rs:21:25
|
21 | pub use protocol_info::{Feature, Protocol};
| ^^^^^^^
|
= note: `#[warn(unused_imports)]` on by default
```
I think it's useless can can be removed.
# Description
There are lots of duplicate test for `cp`, it's because we once have
`old-cp` command.
Today `old-cp` is removed, so there is no need to keep these tests.
# Description
This PR removes the environment variables associated with stdlib
logging. We need not pollute the environment since it contains a finite
amount of space. This PR changes the env vars to exported custom
commands.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
In normal operations we don't display the dataframes directly.
The `fmt` feature on `polars-core` pulls in the `comfy-table` crate with
its own dependencies on `crossterm` and `strum(_macros)`.
This has the chance to duplicate dependencies. (currently strum version
divergence)
Without this feature only the shapes should be displayed.
May degrade the error output during testing.
# Description
`rmp_serde` has two kinds of errors that contain I/O errors, and an EOF
can occur inside either of them, but we were only treating an EOF inside
an `InvalidMarkerRead` as an EOF, which would make sense for the
beginning of a message.
However, we should also treat an incomplete message + EOF as an EOF.
There isn't really any point in reporting that an EOF was received
mid-message.
This should fix the issue where the
`seq_describe_no_collect_succeeds_without_error` test would sometimes
fail, as doing a `describe --no-collect` followed by nushell exiting
could (but was not guaranteed to) cause this exact scenario.
# User-Facing Changes
Will probably remove useless `read error` messages from plugins after
exit of `nu`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
# Description
These tests have been causing some pain, so I've done a few more things
to try to make them a bit more tolerant of running slowly.
- `plugin_process_exits_after_stop`: using timeout strategy, allows the
process 5 seconds to exit.
- generally don't use sleep to test anything less than 100ms
# User-Facing Changes
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Because `std::fs::canonicalize` requires the path to exist, this PR
makes it so that when canonicalizing any config file, the
`$nu.default-config-dir/nushell` part is canonicalized first, then
`$nu.default-config-dir/nushell/foo.nu` is canonicalized.
This should also fix the issue @devyn pointed out
[here](https://github.com/nushell/nushell/pull/12118#issuecomment-1989546708)
where a couple of the tests failed if one's `~/.config/nushell` folder
was actually a symlink to a different folder. The tests previously
didn't canonicalize the expected paths.
I was going to make a PR that caches the config directory on startup (as
suggested by fdncred and Ian in Discord), but I can make that part of
this PR if we want to avoid creating unnecessary PRs. I think it
probably makes more sense to separate them though.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Bumps [rayon](https://github.com/rayon-rs/rayon) from 1.8.1 to 1.9.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rayon-rs/rayon/blob/main/RELEASES.md">rayon's
changelog</a>.</em></p>
<blockquote>
<h1>Release rayon 1.9.0 (2024-02-27)</h1>
<ul>
<li>The new methods
<code>IndexedParallelIterator::by_exponential_blocks</code> and
<code>by_uniform_blocks</code> allow processing items in smaller groups
at a time.</li>
<li>The new <code>iter::walk_tree</code>, <code>walk_tree_prefix</code>,
and <code>walk_tree_postfix</code>
functions enable custom parallel iteration over tree-like
structures.</li>
<li>The new method <code>ParallelIterator::collect_vec_list</code>
returns items as a linked
list of vectors, which is an efficient mode of parallel collection used
by
many of the internal implementations of <code>collect</code>.</li>
<li>The new methods
<code>ParallelSliceMut::par_split_inclusive_mut</code>,
<code>ParallelSlice::par_split_inclusive</code>, and
<code>ParallelString::par_split_inclusive</code> all work like a normal
split but
keeping the separator as part of the left slice.</li>
<li>The new <code>ParallelString::par_split_ascii_whitespace</code>
splits only on ASCII
whitespace, which is faster than including Unicode multi-byte
whitespace.</li>
<li><code>OsString</code> now implements
<code>FromParallelIterator<_></code> and
<code>ParallelExtend<_></code>
for a few item types similar to the standard <code>FromIterator</code>
and <code>Extend</code>.</li>
<li>The internal <code>Pattern</code> trait for string methods is now
implemented for
<code>[char; N]</code> and <code>&[char; N]</code>, matching any of
the given characters.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="dc13cb7875"><code>dc13cb7</code></a>
Merge <a
href="https://redirect.github.com/rayon-rs/rayon/issues/810">#810</a></li>
<li><a
href="67eeea6f2a"><code>67eeea6</code></a>
Release rayon 1.5.0 / rayon-core 1.9.0</li>
<li><a
href="4828f30eef"><code>4828f30</code></a>
Merge <a
href="https://redirect.github.com/rayon-rs/rayon/issues/808">#808</a></li>
<li><a
href="eeb0d1ad5e"><code>eeb0d1a</code></a>
update ci/compat-Cargo.lock</li>
<li><a
href="12f0d202b8"><code>12f0d20</code></a>
Update glium so that rayon-demo runs on Gnome Wayland</li>
<li><a
href="1f069d7710"><code>1f069d7</code></a>
Merge <a
href="https://redirect.github.com/rayon-rs/rayon/issues/807">#807</a></li>
<li><a
href="9691328a5a"><code>9691328</code></a>
Use Iterator::copied</li>
<li><a
href="e81835c074"><code>e81835c</code></a>
Update crossbeam dependencies (requires Rust 1.36)</li>
<li><a
href="5b3d917d6c"><code>5b3d917</code></a>
Merge <a
href="https://redirect.github.com/rayon-rs/rayon/issues/804">#804</a></li>
<li><a
href="5c55033950"><code>5c55033</code></a>
Release rayon 1.4.1</li>
<li>Additional commits viewable in <a
href="https://github.com/rayon-rs/rayon/compare/rayon-core-v1.8.1...rayon-core-v1.9.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [miette](https://github.com/zkat/miette) from 7.1.0 to 7.2.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/zkat/miette/blob/main/CHANGELOG.md">miette's
changelog</a>.</em></p>
<blockquote>
<h2>7.2.0 (2024-03-07)</h2>
<h3>Features</h3>
<ul>
<li><strong>wasm:</strong> add feature "fancy-no-syscall" for
wasm targets (<a
href="https://redirect.github.com/zkat/miette/issues/349">#349</a>) (<a
href="328bf37922">328bf379</a>)</li>
</ul>
<h3>Bug Fixes</h3>
<ul>
<li><strong>label-collections:</strong> Label collection fixes and
cleanup (<a
href="https://redirect.github.com/zkat/miette/issues/343">#343</a>) (<a
href="75fea0935e">75fea093</a>)</li>
<li><strong>invalid span:</strong> skip the snippet when read_span fails
(<a href="https://redirect.github.com/zkat/miette/issues/347">#347</a>)
(<a
href="7d9dfc6e8e">7d9dfc6e</a>)</li>
<li><strong>redundant-import:</strong> fix a warning and CI failure in
nightly (<a
href="https://redirect.github.com/zkat/miette/issues/348">#348</a>) (<a
href="6ea86a2248">6ea86a22</a>)</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="ca646f3119"><code>ca646f3</code></a>
chore: Release</li>
<li><a
href="ff7baae70c"><code>ff7baae</code></a>
docs: update changelog</li>
<li><a
href="24a7bf4f4e"><code>24a7bf4</code></a>
ci(doc consistency): check that lib.rs and README.md are consistent (<a
href="https://redirect.github.com/zkat/miette/issues/353">#353</a>)</li>
<li><a
href="22b29eec38"><code>22b29ee</code></a>
docs: use <code>cargo readme</code> to update (<a
href="https://redirect.github.com/zkat/miette/issues/351">#351</a>)</li>
<li><a
href="62cfd221ba"><code>62cfd22</code></a>
docs: add <code>severity</code> example (<a
href="https://redirect.github.com/zkat/miette/issues/350">#350</a>)</li>
<li><a
href="328bf37922"><code>328bf37</code></a>
feat(wasm): add feature "fancy-no-syscall" for wasm targets
(<a
href="https://redirect.github.com/zkat/miette/issues/349">#349</a>)</li>
<li><a
href="6ea86a2248"><code>6ea86a2</code></a>
fix(redundant-import): fix a warning and CI failure in nightly (<a
href="https://redirect.github.com/zkat/miette/issues/348">#348</a>)</li>
<li><a
href="7d9dfc6e8e"><code>7d9dfc6</code></a>
fix(invalid span): skip the snippet when read_span fails (<a
href="https://redirect.github.com/zkat/miette/issues/347">#347</a>)</li>
<li><a
href="75fea0935e"><code>75fea09</code></a>
fix(label-collections): Label collection fixes and cleanup (<a
href="https://redirect.github.com/zkat/miette/issues/343">#343</a>)</li>
<li>See full diff in <a
href="https://github.com/zkat/miette/compare/miette-derive-v7.1.0...miette-derive-v7.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
There were two problems in `PersistentPlugin` which could cause a
deadlock:
1. There were two mutexes being used, and `get()` could potentially hold
both simultaneously if it had to spawn. This won't necessarily cause a
deadlock on its own, but it does mean that lock order is sensitive
2. `set_gc_config()` called `flush()` while still holding the lock,
meaning that the GC thread had to proceed before the lock was released.
However, waiting for the GC thread to proceed could mean waiting for the
GC thread to call `stop()`, which itself would try to lock the mutex.
So, it's not safe to wait for the GC thread while the lock is held. This
is fixed now.
I've also reverted #12177, as @IanManske reported that this was also
happening for him on Linux, and it seems to be this problem which should
not be platform-specific at all. I believe this solves it.
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
# Description
These are hanging the CI sometimes, and that's no good. I'll try to
figure out how to make these tests pass consistently in the meantime.
# User-Facing Changes
I haven't heard any feedback so far that the plugin GC doesn't actually
work on macOS, so hopefully it's not a big problem, but we won't know
until I'm able to track down the problem.
# After Submitting
- [ ] Fix the tests so they don't get stuck
- Refactor command benchmark
- should simplify addition of more command benchmarks
- just provide the pipeline you want to run/ choose potential scaling
- Bench engine state with ctrlc set
- `None` vs `AtomicBool` behind `Arc`
# Description
This adds three engine calls: `GetEnvVar`, `GetEnvVars`, for getting
environment variables from the plugin command context, and
`GetCurrentDir` for getting the current working directory.
Plugins are now launched in the directory of their executable to try to
make improper use of the current directory without first setting it more
obvious. Plugins previously launched in whatever the current directory
of the engine was at the time the plugin command was run, but switching
to persistent plugins broke this, because they stay in whatever
directory they launched in initially.
This also fixes the `gstat` plugin to use `get_current_dir()` to
determine its repo location, which was directly affected by this
problem.
# User-Facing Changes
- Adds new engine calls (`GetEnvVar`, `GetEnvVars`, `GetCurrentDir`)
- Runs plugins in a different directory from before, in order to catch
bugs
- Plugins will have to use the new engine calls if they do filesystem
stuff to work properly
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Document the working directory behavior on plugin launch
- [ ] Document the new engine calls + response type (`ValueMap`)
# Description
This causes `PersistentPlugin` to wait for the plugin garbage collector
to actually receive and process its config when setting it in
`set_gc_config`.
The motivation behind doing this is to make setting GC config in scripts
more deterministic. Before this change we couldn't really guarantee that
the GC could see your config before you started doing other things.
There is a slight cost to performance to doing this - we set config
before each plugin call because we don't necessarily know that it
reflects what's in `$env.config`, and now to do that we have to
synchronize with the GC thread.
This was probably the cause of spuriously failing tests as mentioned by
@sholderbach. Hopefully this fixes it. It might be the case that
launching threads on some platforms (or just on a really busy test
runner) sometimes takes a significant amount of time.
# User-Facing Changes
- possibly slightly worse performance for plugin calls
# Description
Adds support for the following operations on plugin custom values, in
addition to `to_base_value` which was already present:
- `follow_path_int()`
- `follow_path_string()`
- `partial_cmp()`
- `operation()`
- `Drop` (notification, if opted into with
`CustomValue::notify_plugin_on_drop`)
There are additionally customizable methods within the `Plugin` and
`StreamingPlugin` traits for implementing these functions in a way that
requires access to the plugin state, as a registered handle model such
as might be used in a dataframes plugin would.
`Value::append` was also changed to handle custom values correctly.
# User-Facing Changes
- Signature of `CustomValue::follow_path_string` and
`CustomValue::follow_path_int` changed to give access to the span of the
custom value itself, useful for some errors.
- Plugins using custom values have to be recompiled because the engine
will try to do custom value operations that aren't supported
- Plugins can do more things 🎉
# Tests + Formatting
Tests were added for all of the new custom values functionality.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Document protocol reference `CustomValueOp` variants:
- [ ] `FollowPathInt`
- [ ] `FollowPathString`
- [ ] `PartialCmp`
- [ ] `Operation`
- [ ] `Dropped`
- [ ] Document `notify_on_drop` optional field in `PluginCustomValue`
# Description
Fixes some ignored clippy lints.
# User-Facing Changes
Changes some signatures and return types to `&dyn Command` instead of
`&Box<dyn Command`, but I believe this is only an internal change.
Part of the doccomment was an implementation note on the `im` crate that
hasn't been used for ages.
(If I recall we maybe even received a comment on discord on this)
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Closes#12103
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
As described in #12103, this PR makes Nushell use `XDG_CONFIG_HOME` as
the config directory if it exists. Otherwise, it uses the old behavior,
which was to use `dirs_next::config_dir()`.
Edit: We discussed choosing between `XDG_CONFIG_HOME` and the default
config directory in Discord and decided against it, at least for now.
<s>@kubouch also suggested letting users choose between
`XDG_CONFIG_HOME` and the default config directory if config files
aren't found on startup and `XDG_CONFIG_HOME` is set to a value
different from the default config directory</s>
On Windows and MacOS, if the `XDG_CONFIG_HOME` variable is set but
`XDG_CONFIG_HOME` is either empty or doesn't exist *and* the old config
directory is non-empty, Nushell will issue a warning on startup saying
that it won't move files from the old config directory to the new one.
To do this, I had to add a `nu_path::config_dir_old()` function. I
assume that at some point, we will remove the warning message and the
function can be removed too. Alternatively, instead of having that
function there, `main.rs` could directly call `dirs_next::config_dir()`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
When `$env.XDG_CONFIG_HOME` is set to an absolute path, Nushell will use
`$"($env.XDG_CONFIG_HOME)/nushell"` as its config directory (previously,
this only worked on Linux).
To use `App Data\Roaming` (Windows) or `Library/Application Support`
(MacOS) instead (the old behavior), one can either leave
`XDG_CONFIG_HOME` unset or set it to an empty string.
If `XDG_CONFIG_HOME` is set, but to a non-absolute/invalid path, Nushell
will report an error on startup and use the default config directory
instead:
On Windows and MacOS, if the `XDG_CONFIG_HOME` variable is set but
`XDG_CONFIG_HOME` is either empty or doesn't exist *and* the old config
directory is non-empty, Nushell will issue a warning on startup saying
that it won't move files from the old config directory to the new one.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
The existing config path tests have been modified to use
`XDG_CONFIG_HOME` to change the config directory on all OSes, not just
Linux.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
The documentation will have to be updated to note that Nushell uses
`XDG_CONFIG_HOME` now. As @fdncred pointed out, it's possible for people
to set `XDG_CONFIG_HOME` to, say, `~/.config/nushell` rather than
`~/.config`, so the documentation could warn about that mistake.
# Description
This makes the test a bit more complicated, but implements a timeout
loop in the script. As long as the test completes in 5 seconds it's
considered to be ok. The default is 10 seconds, so that would still be
half that.
This should help with running on the busy CI where things sometimes take
a while. Unfortunately this is a timing sensitive test. The alternative
is basically to just not test this at all because it's too difficult to
guarantee that it will complete in time. If we continue to have issues,
I might just have to take that route instead.
# Description
Fixes: #11287Fixes: #11318
It's implemented by porting the similar logic in `eval_call`, I've tried
to reduce duplicate code, but it seems that it's hard without using
macros.
3ee2fc60f9/crates/nu-engine/src/eval.rs (L60-L130)
It only works for `do` command.
# User-Facing Changes
## Closure supports optional parameter
```nushell
let code = {|x?| print ($x | default "i'm the default")}
do $code
```
Previously it raises an error, after this change, it prints `i'm the
default`.
## Closure supports type checking
```nushell
let code = {|x: int| echo $x}
do $code "aa"
```
After this change, it will raise an error with a message: `can't convert
string to int`
# Tests + Formatting
Done
# After Submitting
NaN
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
- fixes#12126
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This pr improves the error message for issue #12126
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This is partially "feng-shui programming" of moving things to new
separate places.
The later commits include "`git blame` tollbooths" by moving out chunks
of code into new files, which requires an extra step to track things
with `git blame`. We can negiotiate if you want to keep particular
things in their original place.
If egregious I tried to add a bit of documentation. If I see something
that is unused/unnecessarily `pub` I will try to remove that.
- Move `nu_protocol::Exportable` to `nu-parser`
- Guess doccomment for `Exportable`
- Move `Unit` enum from `value` to `AST`
- Move engine state `Variable` def into its folder
- Move error-related files in `nu-protocol` subdir
- Move `pipeline_data` module into its own folder
- Move `stream.rs` over into the `pipeline_data` mod
- Move `PipelineMetadata` into its own file
- Doccomment `PipelineMetadata`
- Remove unused `is_leap_year` in `value/mod`
- Note about criminal `type_compatible` helper
- Move duration fmting into new `value/duration.rs`
- Move filesize fmting logic to new `value/filesize`
- Split reexports from standard imports in `value/mod`
- Doccomment trait `CustomValue`
- Polish doccomments and intradoc links
# Description
The intended effect of the `extra` feature has been undermined by
introducing the full builds on our release pages and having more
activity on some of the extra commands.
To simplify the feature matrix let's get rid of it and focus our effort
on truly either refining a command to well-specified behavior or
discarding it entirely from the `nu` binary and moving it into plugins.
## Details
- Remove `--features extra` from CI
- Don't explicitly name `extra` in full build wf
- Remove feature extra from build-help scripts
- Update README in `nu-cmd-extra`
- Remove feature `extra`
- Fix previously dead `format pattern` tests
- Relax signature of `to html`
- Fix/ignore `html::test_no_color_flag`
- Remove dead features from `version`
- Refine `to html` type signature
# User-Facing Changes
The commands that were previously only available when building with
`--features extra` will now be available to everyone. This increases the
number of dependencies slightly but has a limited impact on the overall
binary size.
# Tests + Formatting
Some tests that were left in `nu-command` during cratification were dead
because the feature was not passed to `nu-command` and only to
`nu-cmd-lang` for feature-flag mention in `version`.
Those tests have now been either fixed or ignored in one case.
# After Submitting
There may be places in the documentation where we point to `--features
extra` that will now be moot (apart from the generated command help)
It turns out that my previous PR,
https://github.com/nushell/nushell/pull/11999, didn't properly
canonicalize `$nu.default-config-dir` in a scenario where
`XDG_CONFIG_HOME` (or the equivalent on each platform) was a symlink. To
remedy that, this PR makes `nu_path::config_dir()` return a
canonicalized path. This probably shouldn't break anything (except maybe
tests relying on the old behavior), since the canonical path will be
equivalent to non-canonical paths.
# User-Facing Changes
A user may get a path with symlinks resolved and `..`s replaced where
they previously didn't. I'm not sure where this would happen, though,
and anyway, the canonical path is probably the "correct" thing to
present to the user. We're using `omnipath` to make the path presentable
to the user on Windows, so there's no danger of someone getting an path
with `\\?` there.
# Tests + Formatting
The tests for config files have been updated to run the binary using the
`Director` so that it has access to the `XDG_CONFIG_HOME`/`HOME`
environment variables to be able to change the config directory.
# Description
This PR uses the new plugin protocol to intelligently keep plugin
processes running in the background for further plugin calls.
Running plugins can be seen by running the new `plugin list` command,
and stopped by running the new `plugin stop` command.
This is an enhancement for the performance of plugins, as starting new
plugin processes has overhead, especially for plugins in languages that
take a significant amount of time on startup. It also enables plugins
that have persistent state between commands, making the migration of
features like dataframes and `stor` to plugins possible.
Plugins are automatically stopped by the new plugin garbage collector,
configurable with `$env.config.plugin_gc`:
```nushell
$env.config.plugin_gc = {
# Configuration for plugin garbage collection
default: {
enabled: true # true to enable stopping of inactive plugins
stop_after: 10sec # how long to wait after a plugin is inactive to stop it
}
plugins: {
# alternate configuration for specific plugins, by name, for example:
#
# gstat: {
# enabled: false
# }
}
}
```
If garbage collection is enabled, plugins will be stopped after
`stop_after` passes after they were last active. Plugins are counted as
inactive if they have no running plugin calls. Reading the stream from
the response of a plugin call is still considered to be activity, but if
a plugin holds on to a stream but the call ends without an active
streaming response, it is not counted as active even if it is reading
it. Plugins can explicitly disable the GC as appropriate with
`engine.set_gc_disabled(true)`.
The `version` command now lists plugin names rather than plugin
commands. The list of plugin commands is accessible via `plugin list`.
Recommend doing this together with #12029, because it will likely force
plugin developers to do the right thing with mutability and lead to less
unexpected behavior when running plugins nested / in parallel.
# User-Facing Changes
- new command: `plugin list`
- new command: `plugin stop`
- changed command: `version` (now lists plugin names, rather than
commands)
- new config: `$env.config.plugin_gc`
- Plugins will keep running and be reused, at least for the configured
GC period
- Plugins that used mutable state in weird ways like `inc` did might
misbehave until fixed
- Plugins can disable GC if they need to
- Had to change plugin signature to accept `&EngineInterface` so that
the GC disable feature works. #12029 does this anyway, and I'm expecting
(resolvable) conflicts with that
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Because there is some specific OS behavior required for plugins to not
respond to Ctrl-C directly, I've developed against and tested on both
Linux and Windows to ensure that works properly.
# After Submitting
I think this probably needs to be in the book somewhere
# Description
This allows plugins to make calls back to the engine to get config,
evaluate closures, and do other things that must be done within the
engine process.
Engine calls can both produce and consume streams as necessary. Closures
passed to plugins can both accept stream input and produce stream output
sent back to the plugin.
Engine calls referring to a plugin call's context can be processed as
long either the response hasn't been received, or the response created
streams that haven't ended yet.
This is a breaking API change for plugins. There are some pretty major
changes to the interface that plugins must implement, including:
1. Plugins now run with `&self` and must be `Sync`. Executing multiple
plugin calls in parallel is supported, and there's a chance that a
closure passed to a plugin could invoke the same plugin. Supporting
state across plugin invocations is left up to the plugin author to do in
whichever way they feel best, but the plugin object itself is still
shared. Even though the engine doesn't run multiple plugin calls through
the same process yet, I still considered it important to break the API
in this way at this stage. We might want to consider an optional
threadpool feature for performance.
2. Plugins take a reference to `EngineInterface`, which can be cloned.
This interface allows plugins to make calls back to the engine,
including for getting config and running closures.
3. Plugins no longer take the `config` parameter. This can be accessed
from the interface via the `.get_plugin_config()` engine call.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Not only does this have plugin protocol changes, it will require plugins
to make some code changes before they will work again. But on the plus
side, the engine call feature is extensible, and we can add more things
to it as needed.
Plugin maintainers will have to change the trait signature at the very
least. If they were using `config`, they will have to call
`engine.get_plugin_config()` instead.
If they were using the mutable reference to the plugin, they will have
to come up with some strategy to work around it (for example, for `Inc`
I just cloned it). This shouldn't be such a big deal at the moment as
it's not like plugins have ever run as daemons with persistent state in
the past, and they don't in this PR either. But I thought it was
important to make the change before we support plugins as daemons, as an
exclusive mutable reference is not compatible with parallel plugin
calls.
I suggest this gets merged sometime *after* the current pending release,
so that we have some time to adjust to the previous plugin protocol
changes that don't require code changes before making ones that do.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
I will document the additional protocol features (`EngineCall`,
`EngineCallResponse`), and constraints on plugin call processing if
engine calls are used - basically, to be aware that an engine call could
result in a nested plugin call, so the plugin should be able to handle
that.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR refactors `nu-check` and makes it possible to check module
directories. Also removes the requirement for files to end with .nu: It
was too limiting for module directories and there are executable scripts
[around](https://github.com/nushell/nu_scripts/tree/main/make_release/release-note)
that do not end with .nu, it's a common practice for scripts to omit it.
Other changes are:
* Removed the `--all` flag and heuristic parse because these are
irrelevant now when module syntax is a subset of script syntax (i.e.,
every module can be parsed as script).
* Reduced code duplication and in general tidied up the code
* Replaced unspanned errors with spanned ones.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* `nu-check` doesn't require files to end with .nu
* can check module directories
* Removed `--all` flag
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This is another attempt on #11288
This allows for a `Stack` to have a parent stack (behind an `Arc`). This
is being added to avoid constant stack copying in REPL code.
Concretely the following changes are included here:
- `Stack` can now have a `parent_stack`, pointing to another stack
- variable lookups can fallback to this parent stack (env vars and
everything else is still copied)
- REPL code has been reworked so that we use parenting rather than
cloning. A REPL-code-specific trait helps to ensure that we do not
accidentally trigger a full clone of the main stack
- A property test has been added to make sure that parenting "looks the
same" as cloning for consumers of `Stack` objects
---------
Co-authored-by: Raphael Gaschignard <rtpg@rokkenjima.local>
Co-authored-by: Ian Manske <ian.manske@pm.me>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
It looks like `Playground` and `Director` in nu-tests-support haven't
gotten much love recently, so this PR is for updating them to work with
newer Nushell versions.
- `Director` adds a `--skip-plugins` argument before running `nu`, but
that doesn't exist anymore, so I removed it.
- `Director` also adds a `--perf` argument, which also doesn't exist
anymore. I added `--log-level info` instead to get the performance
output.
- It doesn't seem like anyone was using `playground::matchers`, and it
used the [hamcrest2](https://github.com/Valloric/hamcrest2-rust) crate,
which appears to be unmaintained, so I got rid of that (and the
`hamcrest2` dependency).
- Inside `tests/fixtures/playground/config` were two files in the old
config format: `default.toml` and `startup.toml`. I removed those too.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None, these changes only mess with tests.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #12054
It's cause by nu always add `/*` if there is a parameter in ls, then `ls
""` becomes `ls "/*"`. This pr tries to fix it by only append `/`
character if pattern is not empty.
# User-Facing Changes
NaN
# Tests + Formatting
Done
# After Submitting
NaN
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
I noticed that ctrl+C handling wasn't fully wired up in `into sqlite`,
for some data types we were ignoring ctrl+C presses.
I fixed that up and also made sure we roll back the current transaction
when cancelling (without that, I think we leak memory and database
locks).
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds a new evaluator path with callbacks to a mutable trait
object implementing a Debugger trait. The trait object can do anything,
e.g., profiling, code coverage, step debugging. Currently,
entering/leaving a block and a pipeline element is marked with
callbacks, but more callbacks can be added as necessary. Not all
callbacks need to be used by all debuggers; unused ones are simply empty
calls. A simple profiler is implemented as a proof of concept.
The debugging support is implementing by making `eval_xxx()` functions
generic depending on whether we're debugging or not. This has zero
computational overhead, but makes the binary slightly larger (see
benchmarks below). `eval_xxx()` variants called from commands (like
`eval_block_with_early_return()` in `each`) are chosen with a dynamic
dispatch for two reasons: to not grow the binary size due to duplicating
the code of many commands, and for the fact that it isn't possible
because it would make Command trait objects object-unsafe.
In the future, I hope it will be possible to allow plugin callbacks such
that users would be able to implement their profiler plugins instead of
having to recompile Nushell.
[DAP](https://microsoft.github.io/debug-adapter-protocol/) would also be
interesting to explore.
Try `help debug profile`.
## Screenshots
Basic output:
To profile with more granularity, increase the profiler depth (you'll
see that repeated `is-windows` calls take a large chunk of total time,
making it a good candidate for optimizing):
## Benchmarks
### Binary size
Binary size increase vs. main: **+40360 bytes**. _(Both built with
`--release --features=extra,dataframe`.)_
### Time
```nushell
# bench_debug.nu
use std bench
let test = {
1..100
| each {
ls | each {|row| $row.name | str length }
}
| flatten
| math avg
}
print 'debug:'
let res2 = bench { debug profile $test } --pretty
print $res2
```
```nushell
# bench_nodebug.nu
use std bench
let test = {
1..100
| each {
ls | each {|row| $row.name | str length }
}
| flatten
| math avg
}
print 'no debug:'
let res1 = bench { do $test } --pretty
print $res1
```
`cargo run --release -- bench_debug.nu` is consistently 1--2 ms slower
than `cargo run --release -- bench_nodebug.nu` due to the collection
overhead + gathering the report. This is expected. When gathering more
stuff, the overhead is obviously higher.
`cargo run --release -- bench_nodebug.nu` vs. `nu bench_nodebug.nu` I
didn't measure any difference. Both benchmarks report times between 97
and 103 ms randomly, without one being consistently higher than the
other. This suggests that at least in this particular case, when not
running any debugger, there is no runtime overhead.
## API changes
This PR adds a generic parameter to all `eval_xxx` functions that forces
you to specify whether you use the debugger. You can resolve it in two
ways:
* Use a provided helper that will figure it out for you. If you wanted
to use `eval_block(&engine_state, ...)`, call `let eval_block =
get_eval_block(&engine_state); eval_block(&engine_state, ...)`
* If you know you're in an evaluation path that doesn't need debugger
support, call `eval_block::<WithoutDebug>(&engine_state, ...)` (this is
the case of hooks, for example).
I tried to add more explanation in the docstring of `debugger_trait.rs`.
## TODO
- [x] Better profiler output to reduce spam of iterative commands like
`each`
- [x] Resolve `TODO: DEBUG` comments
- [x] Resolve unwraps
- [x] Add doc comments
- [x] Add usage and extra usage for `debug profile`, explaining all
columns
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Hopefully none.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Previously, the plugin itself would also print error messages about
mismatched versions, and there could be many of them while parsing a
`register` command which would be hard to follow. This removes that
behavior so that the error message is easier to read, and also makes the
error message on the engine side mention the plugin name so that it's
easier to tell which plugin needs to be updated.
The python plugin has also been modified to make testing this behavior
easier. Just change `NUSHELL_VERSION` in the script file to something
incompatible.
# User-Facing Changes
- Better error message
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Change the `ignore` command to use `drain()` instead of collecting a
value.
This saves memory usage when piping a lot of output to `ignore`. There's
no reason to keep the output in memory if it's going to be discarded
anyway.
# User-Facing Changes
Probably none
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Fix Nu release packages after upgrading to Nu v0.91
`mv` fails here:
https://github.com/nushell/nightly/actions/runs/8199461348/job/22424601700
with error:
```console
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[/home/runner/work/nightly/nightly/.github/workflows/release-pkg.nu:158:18]
157 │
158 │ let files = (ls | get name)
· ─┬
· ╰── source value
159 │ let dest = if $env.RELEASE_TYPE == 'full' { $'($bin)-($version)-($FULL_NAME)' } else { $'($bin)-($version)-($target)' }
╰────
Error: × cannot move '/home/runner/work/nightly/nightly/output/nu' to a
│ subdirectory of itself, '/home/runner/work/nightly/nightly/output/nu-
│ 0.91.1-x86_64-unknown-linux-gnu//home/runner/work/nightly/nightly/output/
│ nu'
```
Is this a bug of `mv`? At least the `mv` command in 0.90.1 works
# Description
This PR introduces [workspaces
dependencies](https://doc.rust-lang.org/cargo/reference/workspaces.html#the-dependencies-table).
The advantages are:
- a single place where dependency versions are declared
- reduces the number of files to change when upgrading a dependency
- reduces the risk of accidentally depending on 2 different versions of
the same dependency
I've only done a few so far. If this PR is accepted, I might continue
and progressively do the rest.
# User-Facing Changes
N/A
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
- Fixes issue #11982
# Description
Expressions with unbalanced parenthesis [excess closing ')' parenthesis]
will throw an error instead of interpreting ')' as a string.
Solved he same way as closing braces '}' are handled.
# User-Facing Changes
- Trailing closing parentheses ')' which do not match the number of
opening parentheses '(' will lead to a parse error.
- From what I have found in the documentation this is the intended
behavior, thus no documentation has been updated on my part
# Tests + Formatting
- Two tests added in src/tests/test_parser.rs
- All previous tests are still passing
- cargo fmt, clippy and test have been run
Unable to get the following command run
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
---------
Co-authored-by: Noak Jönsson <noakj@kth.se>
# Description
Converts help example results `to text` in `build-command-page`. This
prevents an `item_not_found` error when attempting to `help <command>`
on many legitimate commands.
Fixes#12073
# User-Facing Changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Bumps [open](https://github.com/Byron/open-rs) from 5.0.1 to 5.1.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/Byron/open-rs/releases">open's
releases</a>.</em></p>
<blockquote>
<h2>v5.1.1</h2>
<h3>Bug Fixes</h3>
<ul>
<li>add <code>shellexecute-on-windows</code> feature.
That way, it's possible to toggle on a feature that might
cause issues in some dependency trees that contain <code>flate2</code>
with <code>zlib-ng</code> backend.</li>
</ul>
<h3>Commit Statistics</h3>
<ul>
<li>3 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge branch 'validate-linkage' (59886df)</li>
<li>Add <code>shellexecute-on-windows</code> feature. (74fd8ec)</li>
<li>Try to validate linkage on all platforms (8f26da4)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
<h2>v5.1.0</h2>
<h3>New Features</h3>
<ul>
<li>use <code>ShellExecuteW</code> for detached spawning on Windows</li>
</ul>
<h3>Commit Statistics</h3>
<ul>
<li>3 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge pull request <a
href="https://redirect.github.com/Byron/open-rs/issues/91">#91</a> from
amrbashir/feat/windows/detachded-using-shellexecutew (b268647)</li>
<li>Split into two functions for better readability (4506b2f)</li>
<li>Use <code>ShellExecuteW</code> for detached spawning on Windows
(191cb0e)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Byron/open-rs/blob/main/changelog.md">open's
changelog</a>.</em></p>
<blockquote>
<h2>5.1.1 (2024-03-03)</h2>
<h3>Bug Fixes</h3>
<ul>
<li><!-- raw HTML omitted --> add <code>shellexecute-on-windows</code>
feature.
That way, it's possible to toggle on a feature that might
cause issues in some dependency trees that contain <code>flate2</code>
with <code>zlib-ng</code> backend.</li>
</ul>
<h3>Commit Statistics</h3>
<!-- raw HTML omitted -->
<ul>
<li>3 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge branch 'validate-linkage' (<a
href="59886df5db"><code>59886df</code></a>)</li>
<li>Add <code>shellexecute-on-windows</code> feature. (<a
href="74fd8ec005"><code>74fd8ec</code></a>)</li>
<li>Try to validate linkage on all platforms (<a
href="8f26da4ff1"><code>8f26da4</code></a>)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
<h2>5.1.0 (2024-03-01)</h2>
<h3>New Features</h3>
<ul>
<li><!-- raw HTML omitted --> use <code>ShellExecuteW</code> for
detached spawning on Windows</li>
</ul>
<h3>Commit Statistics</h3>
<!-- raw HTML omitted -->
<ul>
<li>4 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="0c916aefe1"><code>0c916ae</code></a>
Release open v5.1.1</li>
<li><a
href="59886df5db"><code>59886df</code></a>
Merge branch 'validate-linkage'</li>
<li><a
href="74fd8ec005"><code>74fd8ec</code></a>
fix: add <code>shellexecute-on-windows</code> feature.</li>
<li><a
href="8f26da4ff1"><code>8f26da4</code></a>
try to validate linkage on all platforms</li>
<li><a
href="21a73ee19d"><code>21a73ee</code></a>
Release open v5.1.0</li>
<li><a
href="b268647bd2"><code>b268647</code></a>
Merge pull request <a
href="https://redirect.github.com/Byron/open-rs/issues/91">#91</a> from
amrbashir/feat/windows/detachded-using-shellexecutew</li>
<li><a
href="4506b2f8ac"><code>4506b2f</code></a>
split into two functions for better readability</li>
<li><a
href="191cb0e220"><code>191cb0e</code></a>
feat: use <code>ShellExecuteW</code> for detached spawning on
Windows</li>
<li><a
href="f4ef7c9de9"><code>f4ef7c9</code></a>
Release open v5.0.2</li>
<li><a
href="0a25651fa0"><code>0a25651</code></a>
Merge pull request <a
href="https://redirect.github.com/Byron/open-rs/issues/89">#89</a> from
jackpot51/patch-1</li>
<li>Additional commits viewable in <a
href="https://github.com/Byron/open-rs/compare/v5.0.1...v5.1.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR fixes a globbing bug in the `du` command. The problem was that
`--exclude` needed to be a `NuGlob` instead of a `String`. A variety of
ways were tried to fix this, including spread operators and `into glob`
but none of them worked. Here's the [Discord
Conversation](https://discord.com/channels/601130461678272522/1214950311207243796/1214950311207243796)
that documents the attempts.
### Before
```nushell
❯ du $env.PWD -x crates/**
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #1:1:16]
1 │ du $env.PWD -x crates/**
· ────┬────
· ╰── can't convert glob to string
╰────
```
### After
```nushell
❯ du $env.PWD -x crates/**
╭─#─┬────path────┬apparent─┬physical─┬───directories───┬files╮
│ 0 │ D:\nushell │ 55.6 MB │ 55.6 MB │ [table 17 rows] │ │
╰───┴────────────┴─────────┴─────────┴─────────────────┴─────╯
```
We release on Tuesdays and open dependabot PRs will rebase after the
version bump and thus consume unnecessary workers during release, thus
let's open new ones on Wednesday
# Description
This PR fixes the typo in the parameter `--table-name` instead of
`--table_name` in the `into sqlite` command.
fixes#12067
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Hello! This is my first PR to nushell, as I was looking at things for
#5066. The usage text for the date commands seemed fine to me, so this
is just a bit of a tidy up of the examples, mostly the description text.
# Description
- Remove two incorrect examples for `date to-record` and `date to-table`
where nothing was piped in (which causes an error in actual use).
- Fix misleading descriptions in `date to-timezone` which erroneously
referred to Hawaii's time zone.
- Standardise on "time zone" in written descriptions.
- Generally tidy up example descriptions and improve consistency.
# User-Facing Changes
Only in related help text showing examples.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix typos in comments
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Signed-off-by: geekvest <cuimoman@sohu.com>
# Description
This improves the resolution of the sleep commands by simply not
clamping to the default 100ms ctrl+c signal checking loop if the
passed-in duration is shorter.
# User-Facing Changes
You can use smaller values in sleep.
```
# Before
timeit { 0..100 | each { |row| print $row; sleep 10ms; } } # +10sec
# After
timeit { 0..100 | each { |row| print $row; sleep 10ms; } } # +1sec
```
It still depends on the internal behavior of thread::sleep and the OS
timers. In windows it doesn't seem to go much lower than 15 or 10ms, or
0 if you asked for that.
# After Submitting
Sleep didn't have anything documenting its minimum value, so this should
be more in line with its standard procedure. It will still never sleep
for less time than allocated.
Did you know `sleep` can take multiple durations, and it'll add them up?
I didn't
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes sure `$nu.default-config-dir` and `$nu.plugin-path` are
canonicalized.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`$nu.default-config-dir` (and `$nu.plugin-path`) will now give canonical
paths, with symlinks and whatnot resolved.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I've added a couple of tests to check that even if the config folder
and/or any of the config files within are symlinks, the `$nu.*`
variables are properly canonicalized. These tests unfortunately only run
on Linux and MacOS, because I couldn't figure out how to change the
config directory on Windows. Also, given that they involve creating
files, I'm not sure if they're excessive, so I could remove one or two
of them.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Show an example of loading from a custom file, and an example of adding
multiple entry to PATH. Loading from a custom file will hopefully allow
for greater modularity of configuration files out of the box for new
users. Adding multiple paths to PATH is very common, and will help new
users to.
Adds this:
```
# To add multiple paths to PATH this may be simpler:
# use std "path add"
# $env.PATH = ($env.PATH | split row (char esep))
# path add /some/path
# path add ($env.CARGO_HOME | path join "bin")
# path add ($env.HOME | path join ".local" "bin")
# $env.PATH = ($env.PATH | uniq)
# To load from a custom file you can use:
# source ($nu.default-config-dir | path join 'custom.nu')
```
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Replace panics with errors in thread spawning.
Also adds `IntoSpanned` trait for easily constructing `Spanned`, and an
implementation of `From<Spanned<std::io::Error>>` for `ShellError`,
which is used to provide context for the error wherever there was a span
conveniently available. In general this should make it more convenient
to do the right thing with `std::io::Error` and always add a span to it
when it's possible to do so.
# User-Facing Changes
Fewer panics!
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
This PR allows `view source` to view aliases again. It looks like it's
been half broken for a while now.
fixes#12044
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently, in the test for interpolating strings at parse-time, the
formatted string includes `(X years ago)` (from formatting a date) (test
came from https://github.com/nushell/nushell/pull/11562). I didn't
realize when I was writing it that it would have to be updated every
year. This PR uses regex to check the output instead.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This command mixes input from multiple sources and sends items to the
final stream as soon as they're available. It can be called as part of a
pipeline with input, or it can take multiple closures and mix them that
way.
See `crates/nu-command/tests/commands/interleave.rs` for a practical
example. I imagine this will be most often used to run multiple commands
in parallel and print their outputs line-by-line. A stdlib command could
potentially use `interleave` to make this particular use case easier.
It's quite common to wish that nushell had a command for running things
in the background, and instead of providing job control, this provides
an alternative to some use cases for that by just allowing multiple
commands to run simultaneously and direct their output to the same
place.
This enables certain things that are not possible with `par-each` - for
example, you may wish to run `make` across several projects in parallel:
```nushell
(ls projects).name | par-each { |project| cd $project; make }
```
This works well enough, but the output will only be available after each
`make` command finishes. `interleave` allows you to get each line:
```nushell
interleave ...(
(ls projects).name | each { |project|
{
cd $project
make | lines | each { |line| {project: $project, out: $line} }
}
}
)
```
The result of this is a stream that you could process further - for
example, by saving to a text file.
Note that the closures themselves are not run in parallel. The initial
execution happens serially, and then the streams are consumed in
parallel.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Adds a new command.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes#12020
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This is a test of changing out the current criterion microbenchmark tool
to [Divan](https://nikolaivazquez.com/blog/divan/), a new and more
straightforward microbenchmark suit.
Itself states it is robust to noise, and even allow it to be used in CI
settings. It by default has no external dependencies and is very fast to
run, the sampling method allows it to be a lot faster compared to
criterion requiring less samples.
The output is also nicely displayed and easy to get a quick overview of
the performance.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Based off of #11760 to be mergable without conflicts.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix for #11757.
The main issue in #11757 is I tried to copy the timestamp from one
directory to another only to realize that did not work whereas the
coreutils `^touch` had no problems. I thought `--reference` just did not
work, but apparently the whole `touch` command could not work on
directories because
`OpenOptions::new().write(true).create(true).open(&item)` tries to
create `touch`'s target in advance and then modify its timestamps. But
if the target is a directory that already exists then this would fail
even though the crate used for working with timestamps, `filetime`,
already works on directories.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
I don't believe this should change any existing valid behaviors. It just
changes a non-working behavior.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
~~I only could not run `cargo test` because I get compilation errors on
the latest main branch~~
All tests pass with `cargo test --features=sqlite`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- Fixes#11997
# Description
Fixes the issue that comments are not ignored in SSV formatted data.
# User-Facing Changes
If you have a comment in the beginning of SSV formatted data it is now
not included in the SSV table.
# Tests + Formatting
The PR adds one test in the ssv.rs file. All previous test-cases are
still passing. Clippy and Fmt have been ran.
# Description
This PR removes our old nushell `mv` command in favor of the
uutils/coreutils `uu_mv` crate's `mv` command which we integrated in
0.90.1.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
This patches `StreamReader`'s iterator implementation to not return any
values after an I/O error has been encountered.
Without this, it's possible for a protocol error to cause the channel to
disconnect, in which case every call to `recv()` returns an error, which
causes the iterator to produce error values infinitely. There are some
commands that don't immediately stop after receiving an error so it's
possible that they just get stuck in an infinite error. This fixes that
so the error is only produced once, and then the stream ends
artificially.
# Description
After some iteration on globbing rules, I don't think `str escape-glob`
is needed
# User-Facing Changes
```nushell
❯ let f = "[ab]*.nu"
❯ $f | str escape-glob
Error: × str escape-glob is deprecated
╭─[entry #1:1:6]
1 │ $f | str escape-glob
· ───────┬───────
· ╰── if you are trying to escape a variable, you don't need to do it now
╰────
help: Remove `str escape-glob` call
[[]ab[]][*].nu
```
# Tests + Formatting
NaN
# After Submitting
NaN
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
fixes#12006
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Process empty headers as well in `to md` command.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This fixes a race condition where all interfaces to a plugin might have
been dropped, but both sides are still expecting input, and the
`PluginInterfaceManager` doesn't get a chance to see that the interfaces
have been dropped and stop trying to consume input.
As the manager needs to hold on to a writer, we can't automatically
close the stream, but we also can't interrupt it if it's in a waiting to
read. So the best solution is to send a message to the plugin that we
are no longer going to be sending it any plugin calls, so that it knows
that it can exit when it's done.
This race condition is a little bit tricky to trigger as-is, but can be
more noticeable when running plugins in a tight loop. If too many plugin
processes are spawned at one time, Nushell can start to encounter "too
many open files" errors, and not be very useful.
# User-Facing Changes
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
I will need to add `Goodbye` to the protocol docs
# Description
This PR adds `is-not-empty` as a counterpart to `is-empty`. It's the
same code but negates the results. This command has been asked for many
times. So, I thought it would be nice for our community to add it just
as a quality-of-life improvement. This allows people to stop writing
their `def is-not-empty [] { not ($in | is-empty) }` custom commands.
I'm sure there will be some who disagree with adding this, I just think
it's like we have `in` and `not-in` and helps fill out the language and
makes it a little easier to use.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
[Related conversation on
Discord](https://discord.com/channels/601130461678272522/615329862395101194/1209951539901366292)
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This is inspired by the Unix tee command, but significantly more
powerful. Rather than just writing to a file, you can do any kind of
stream operation that Nushell supports within the closure.
The equivalent of Unix `tee -a file.txt` would be, for example, `command
| tee { save -a file.txt }` - but of course this is Nushell, and you can
do the same with structured data to JSON objects, or even just run any
other command on the system with it.
A `--stderr` flag is provided for operating on the stderr stream from
external programs. This may produce unexpected results if the stderr
stream is not then also printed by something else - nushell currently
doesn't. See #11929 for the fix for that.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
If someone was using the system `tee` command, they might be surprised
to find that it's different.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
As title, currently on latest main, nushell confused user if it allows
implicit casting between glob and string:
```nushell
let x = "*.txt"
def glob-test [g: glob] { open $g }
glob-test $x
```
It always expand the glob although `$x` is defined as a string.
This pr implements a solution from @kubouch :
> We could make it really strict and disallow all autocasting between
globs and strings because that's what's causing the "magic" confusion.
Then, modify all builtins that accept globs to accept oneof(glob,
string) and the rules would be that globs always expand and strings
never expand
# User-Facing Changes
After this pr, user needs to use `into glob` to invoke `glob-test`, if
user pass a string variable:
```nushell
let x = "*.txt"
def glob-test [g: glob] { open $g }
glob-test ($x | into glob)
```
Or else nushell will return an error.
```
3 │ glob-test $x
· ─┬
· ╰── can't convert string to glob
```
# Tests + Formatting
Done
# After Submitting
Nan
# Description
Fixes: #11912
# User-Facing Changes
After this change:
```
let x = '*.nu'; ^echo $x
```
will no longer expand glob.
If users still want to expand glob, there are also 3 ways to do this:
```
# 1. use spread operation with `glob` command
let x = '*.nu'; ^echo ...(glob $x)
```
# Tests + Formatting
Done
# After Submitting
NaN
This PR should close#11693.
# Description
This PR just adds a '--all' flag to the `clear` command in order to
clear the terminal and its history.
By default, the `clear` command only scrolls down.
In some cases, clearing the history as well can be useful.
Default behavior does not change.
Even if the `clear` command can be extended form within nushell, having
it in out of the box would allow to use it raw, without any
customization required.
Last but not least, it is pretty easy to implement as it is already
supported by the crate which is used to clear the terminal
(`crossterm`).
Providing relevant screenshot is pretty difficult because the result is
the same.
In the `clear --all` case, you just cannot scroll back anymore.
# User-Facing Changes
`clear` just scrolls down as usual without wiping the history of the
terminal.
` clear --all` scrolls down and wipe the terminal's history which means
scrolling back is no more possible.
# Tests + Formatting
General formatting and tests pass and have been executed on Linux only.
I don't have any way to test it on other systems.
There are no specific tests for the `clear` command so I didn't add any
(and I am not sure how to do if I had to).
Clear command is just a wrapper of the `crossterm` crate Clear command.
I would be more than happy if someone else was able to test it in other
context (even if it may be good as we rely on the crossterm crate).
# After Submitting
PR for documentation has been drafted:
https://github.com/nushell/nushell.github.io/pull/1266.
I'll update it with version if this PR is merged.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
- enables `bits` commands to operate on binary data, where both inputs
are binary and can vary in length
- adds an `--endian` flag to `bits and`, `or`, `xor` for specifying
endianness (for binary values of different lengths)
# User-Facing Changes
- `bits` commands will no longer error for non-int inputs
- the default for `--number-bytes` is now `auto` (infer int size;
changed from 8)
# Tests + Formatting
> addendum: first PR, please inform if any changes are needed
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
`umkdir` was added in #10785, I think it's time to replace the default
one.
# After Submitting
Remove the old `mkdir` command and making coreutils' `umkdir` as the
default
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR does a total of 3 things,
1. It fixes an error when running the `cargo bench` suit where nushell
constants where not set correctly ending in an error when running the
code.
2. It removes 2 redundant benchmark runs as these where duplicates of
existing ones.
3. It reduced encoding and decoding benchmark suit future, only having 4
benches instead of the previous 8.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
- adds a `--signed` flag to `into int` to allow parsing binary values as
signed integers, the integer size depends on the length of the binary
value
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- attempting to convert binary values larger than 8 bytes into integers
now throws an error, with or without `--signed`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- wrote 3 tests and 1 example for `into int --signed` usage
- added an example for unsigned binary `into int`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- will add examples from this PR to `into int` documentation
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
The test checks the time that has passed, bumped year by 1.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR bumps reedline to the latest main which has the
`executehostcommand` changes
https://github.com/nushell/reedline/pull/758 which essentially allows
reedline/nushell to call `executehostcommand` in key bindings and
rewrite the commandline buffer without inserting a newline.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Attempting to complete a directory with hidden files could cause a
variety of issues. When Rust parses the partial path to be completed
into components, it removes the trailing `.` since it interprets this to
mean "the current directory", but in the case of the completer we
actually want to treat the trailling `.` as a literal `.`. This PR fixes
this by adding a `.` back into the Path components if the last character
of the path is a `.` AND the path is longer than 1 character (eg., not
just a ".", since that correctly gets interpreted as Component::CurDir).
Here are some things this fixes:
- Panic when tab completing for hidden files in a directory with hidden
files (ex. `ls test/.`)
- Panic when tab completing a directory with only hidden files (since
the common prefix ends with a `.`, causing the previous issue)
- Mishandling of tab completing hidden files in directory (ex. `ls
~/.<TAB>` lists all files instead of just hidden files)
- Trailing `.` being inexplicably removed when tab completing a
directory without hidden files
While testing for this PR I also noticed there is a similar issue when
completing with `..` (ex. `ls ~/test/..<TAB>`) which is not fixed by
this PR (edit: see #11922).
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added a hidden-files-within-directories test to the `file_completions`
test.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tweaks the built-in `cal` command so that it's still nushell-y
but looks closer to the "expected" cal by abbreviating the name of the
days. I also added the ability to color the current day with the current
"header" color.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently, there's multiple places that look for a config directory, and
each of them has different error messages when it can't be found. This
PR makes a `ConfigDirNotFound` error to standardize the error message
for all of these cases.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Previously, the errors in `create_nu_constant()` would say which config
file Nushell was trying to get when it couldn't find the config
directory. Now it doesn't. However, I think that's fine, given that it
doesn't matter whether it couldn't find the config directory while
looking for `login.nu` or `env.nu`, it only matters that it couldn't
find it.
This is what the error looks like:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
Bumps [mockito](https://github.com/lipanski/mockito) from 1.2.0 to
1.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lipanski/mockito/releases">mockito's
releases</a>.</em></p>
<blockquote>
<h2>1.3.0</h2>
<ul>
<li><a
href="3e2d4662eb">Introduced</a>
<code>Server::new_with_opts</code>,
<code>Server::new_with_opts_async</code> and the <code>ServerOpts</code>
struct to allow configuring the server host, port and enabling
auto-asserts (see next item)</li>
<li><a
href="3e2d4662eb">Added</a>
the <code>assert_on_drop</code> server option that allows you to
automatically call <code>assert()</code> whenever your mocks go out of
scope (defaults to false)</li>
<li><a
href="2ed230b5e9">Expose</a>
<code>Server::socket_address()</code> to return the raw server
<code>SocketAddr</code></li>
<li><a
href="efc7da13c5">Use</a>
only required features for dependencies</li>
<li><a
href="bcdcb2a154">Accept</a>
<code>hyper::header::HeaderValue</code> as a <code>match_header()</code>
value</li>
</ul>
<p>Thanks to <a
href="https://github.com/andrewtoth"><code>@andrewtoth</code></a> <a
href="https://github.com/alexander-jackson"><code>@alexander-jackson</code></a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="a09f1f0009"><code>a09f1f0</code></a>
Bump to 1.3.0</li>
<li><a
href="0be6d7a184"><code>0be6d7a</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/191">#191</a>
from lipanski/server-opts</li>
<li><a
href="3e2d4662eb"><code>3e2d466</code></a>
Allow configuring the mock server (host, port, assert_on_drop)</li>
<li><a
href="12cb5d0786"><code>12cb5d0</code></a>
Add sponsor button</li>
<li><a
href="3cce903c0f"><code>3cce903</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/186">#186</a>
from alexander-jackson/feat/return-raw-socket-address</li>
<li><a
href="2ed230b5e9"><code>2ed230b</code></a>
feat: return raw socket address</li>
<li><a
href="496f26da87"><code>496f26d</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/185">#185</a>
from andrewtoth/less-deps</li>
<li><a
href="40138fe979"><code>40138fe</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/184">#184</a>
from andrewtoth/into-headername</li>
<li><a
href="efc7da13c5"><code>efc7da1</code></a>
Use only required features for dependencies</li>
<li><a
href="10d1081d80"><code>10d1081</code></a>
Add impl IntoHeaderName for &HeaderName</li>
<li>Additional commits viewable in <a
href="https://github.com/lipanski/mockito/compare/1.2.0...1.3.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [tempfile](https://github.com/Stebalien/tempfile) from 3.9.0 to
3.10.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Stebalien/tempfile/blob/master/CHANGELOG.md">tempfile's
changelog</a>.</em></p>
<blockquote>
<h2>3.10.0</h2>
<ul>
<li>Drop <code>redox_syscall</code> dependency, we now use
<code>rustix</code> for Redox.</li>
<li>Add <code>Builder::permissions</code> for setting the permissions on
temporary files and directories (thanks to <a
href="https://github.com/Byron"><code>@Byron</code></a>).</li>
<li>Update rustix to 0.38.31.</li>
<li>Update fastrand to 2.0.1.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="61531eae61"><code>61531ea</code></a>
chore: release v3.10.0</li>
<li><a
href="e246c4a004"><code>e246c4a</code></a>
chore: update deps (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/275">#275</a>)</li>
<li><a
href="4a05e47d3b"><code>4a05e47</code></a>
feat: Add <code>Builder::permissions()</code> method. (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/273">#273</a>)</li>
<li><a
href="184ab8f5ca"><code>184ab8f</code></a>
fix: drop redox_syscall dependency (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/272">#272</a>)</li>
<li>See full diff in <a
href="https://github.com/Stebalien/tempfile/compare/v3.9.0...v3.10.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [strum_macros](https://github.com/Peternator7/strum) from 0.25.3
to 0.26.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/Peternator7/strum/releases">strum_macros's
releases</a>.</em></p>
<blockquote>
<h2>v0.26.1</h2>
<h2>0.26.1</h2>
<ul>
<li><a
href="https://redirect.github.com/Peternator7/strum/pull/325">#325</a>:
use <code>core</code> instead of <code>std</code> in VariantArray.</li>
</ul>
<h2>0.26.0</h2>
<h3>Breaking Changes</h3>
<ul>
<li>The <code>EnumVariantNames</code> macro has been renamed
<code>VariantNames</code>. The deprecation warning should steer you in
the right direction for fixing the warning.</li>
<li>The Iterator struct generated by EnumIter now has new bounds on it.
This shouldn't break code unless you manually
added the implementation in your code.</li>
<li><code>Display</code> now supports format strings using named fields
in the enum variant. This should be a no-op for most code.
However, if you were outputting a string like <code>"Hello
{field}"</code>, this will now be interpretted as a format
string.</li>
<li>EnumDiscriminant now inherits the repr and discriminant values from
your main enum. This makes the discriminant type
closer to a mirror of the original and that's always the goal.</li>
</ul>
<h3>New features</h3>
<ul>
<li>
<p>The <code>VariantArray</code> macro has been added. This macro adds
an associated constant <code>VARIANTS</code> to your enum. The constant
is a <code>&'static [Self]</code> slice so that you can access all
the variants of your enum. This only works on enums that only
have unit variants.</p>
<pre lang="rust"><code>use strum::VariantArray;
<p>#[derive(Debug, VariantArray)]
enum Color {
Red,
Blue,
Green,
}</p>
<p>fn main() {
println!("{:?}", Color::VARIANTS); // prints:
["Red", "Blue", "Green"]
}
</code></pre></p>
</li>
<li>
<p>The <code>EnumTable</code> macro has been <em>experimentally</em>
added. This macro adds a new type that stores an item for each variant
of the enum. This is useful for storing a value for each variant of an
enum. This is an experimental feature because
I'm not convinced the current api surface area is correct.</p>
<pre lang="rust"><code>use strum::EnumTable;
<p>#[derive(Copy, Clone, Debug, EnumTable)]
enum Color {
Red,
Blue,
</code></pre></p>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Peternator7/strum/blob/master/CHANGELOG.md">strum_macros's
changelog</a>.</em></p>
<blockquote>
<h2>0.26.1</h2>
<ul>
<li><a
href="https://redirect.github.com/Peternator7/strum/pull/325">#325</a>:
use <code>core</code> instead of <code>std</code> in VariantArray.</li>
</ul>
<h2>0.26.0</h2>
<h3>Breaking Changes</h3>
<ul>
<li>The <code>EnumVariantNames</code> macro has been renamed
<code>VariantNames</code>. The deprecation warning should steer you in
the right direction for fixing the warning.</li>
<li>The Iterator struct generated by EnumIter now has new bounds on it.
This shouldn't break code unless you manually
added the implementation in your code.</li>
<li><code>Display</code> now supports format strings using named fields
in the enum variant. This should be a no-op for most code.
However, if you were outputting a string like <code>"Hello
{field}"</code>, this will now be interpretted as a format
string.</li>
<li>EnumDiscriminant now inherits the repr and discriminant values from
your main enum. This makes the discriminant type
closer to a mirror of the original and that's always the goal.</li>
</ul>
<h3>New features</h3>
<ul>
<li>
<p>The <code>VariantArray</code> macro has been added. This macro adds
an associated constant <code>VARIANTS</code> to your enum. The constant
is a <code>&'static [Self]</code> slice so that you can access all
the variants of your enum. This only works on enums that only
have unit variants.</p>
<pre lang="rust"><code>use strum::VariantArray;
<p>#[derive(Debug, VariantArray)]
enum Color {
Red,
Blue,
Green,
}</p>
<p>fn main() {
println!("{:?}", Color::VARIANTS); // prints:
["Red", "Blue", "Green"]
}
</code></pre></p>
</li>
<li>
<p>The <code>EnumTable</code> macro has been <em>experimentally</em>
added. This macro adds a new type that stores an item for each variant
of the enum. This is useful for storing a value for each variant of an
enum. This is an experimental feature because
I'm not convinced the current api surface area is correct.</p>
<pre lang="rust"><code>use strum::EnumTable;
<p>#[derive(Copy, Clone, Debug, EnumTable)]
enum Color {
Red,
Blue,
Green,
</code></pre></p>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/Peternator7/strum/commits/v0.26.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
[Discord
context](https://discord.com/channels/601130461678272522/615962413203718156/1211158641793695744)
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Span fields were previously renamed to `internal_span` to discourage
their use in Rust code, but this change also affected the serde I/O for
Value. I don't believe the Python plugin was ever updated to reflect
this change.
This effectively changes it back, but just for the serialized form.
There are good reasons for doing this:
1. `internal_span` is a much longer name, and would be one of the most
common strings found in serialized Value data, probably bulking up the
plugin I/O
2. This change was never really meant to have implications for plugins,
and was just meant to be a hint that `.span()` should be used instead in
Rust code.
When Span refactoring is complete, the serialized form of Value will
probably change again in some significant way, so I think for now it's
best that it's left like this.
This has implications for #11911, particularly for documentation and for
the Python plugin as that was already updated in that PR to reflect
`internal_span`. If this is merged first, I will update that PR.
This would probably be considered a breaking change as it would break
plugin I/O compatibility (but not Rust code). I think it can probably go
in any major release though - all things considered, it's pretty minor,
and users are already expected to recompile plugins for new major
versions. However, it may also be worth holding off to do it together
with #11911 as that PR makes breaking changes in general a little bit
friendlier.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Requires plugin recompile.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Nothing outside of `Value` itself had to be changed to make tests pass.
I did not check the Python plugin and whether it works now, but it was
broken before. It may work again as I think the main incompatibility it
had was expecting to use `span`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
The following clippy lint on nightly would complain:
- https://rust-lang.github.io/rust-clippy/master/#/suspicious_open
We don't want to alter the content in `touch` or truncate by not
writing. While not fully applicable, may be good practice for
platforms/filesystems we are not aware of.
The feature `sqlite` is not active by default on `nu-command`.
Only when building `cargo b --all --tests` would the feature be
activated via `nu`'s feature requirements.
Make the tests conditional
Saw this when double checking the removals from #11938.
Making sure each crate still compiles individually, ensures both that
you can run subcrate tests independently and that the `cargo publish`
run will succeed to build the crate with the default feature set (see
the problems occurring for the `0.90.0` release.
# Description
Moves the `typos` config to the repository root directory. This allows
one to run `typos` locally and have the config used automatically.
Currently, one has to instead run `typos -c .github/.typos.toml`.
Avoid unnecessary allocations or larger iterator structs
- Turn static `Vec`s into arrays when possible
- Use `std::iter::once`/`empty` where applicable
- Use `bool::then_some` in `detect column` `.chain`
- Drop in the bucket: de-vec-ing tests
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Related to #11928 - `tee --stderr` doesn't really work as expected
without it
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Print stderr streams to stderr in `pipeline_data::print_if_stream()`
This corrects unexpected behavior if a stream from an external program
is transformed while still preserving its stderr output. Before this
change, that output is just drained and discarded. Worse, it's drained
to a buffer, which could be really slow and memory hungry if there's a
lot of output on stderr.
This is needed to make `tee --stderr` function in a non-surprising way.
See #11928
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
A script that was erroneously not producing stderr output before might
now, but I can't think of a lot of examples of an external stream being
transformed without being converted.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR add date support when using the `open` command on a xlsx file,
and the using `from xlsx` on a xlsx file.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Currently dates in xlsx files are read as nulls, after this PR this
would be regular dates.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Hi there;
Sorry took that long to respond.
I guess it's good?
It will consume the whole stream whether possible.
I do believe it will be faster in WSL in general too (in a sense of
whole buffer output), but its interesting issue probably needed to be
separated. It was not very well explained as well.
```nushell
> 0..2000 | table -a 2
╭───┬──────╮
│ 0 │ 0 │
│ 1 │ 1 │
│ 2 │ ... │
│ 3 │ 1999 │
│ 4 │ 2000 │
╰───┴──────╯
```
Take care
fix: #11845
cc: @fdncred
# Description
This is a follow up to
https://github.com/nushell/nushell/pull/11621#issuecomment-1937484322
Also Fixes: #11838
## About the code change
It applys the same logic when we pass variables to external commands:
0487e9ffcb/crates/nu-command/src/system/run_external.rs (L162-L170)
That is: if user input dynamic things(like variables, sub-expression, or
string interpolation), it returns a quoted `NuPath`, then user input
won't be globbed
# User-Facing Changes
Given two input files: `a*c.txt`, `abc.txt`
* `let f = "a*c.txt"; rm $f` will remove one file: `a*c.txt`.
~* `let f = "a*c.txt"; rm --glob $f` will remove `a*c.txt` and
`abc.txt`~
* `let f: glob = "a*c.txt"; rm $f` will remove `a*c.txt` and `abc.txt`
## Rules about globbing with *variable*
Given two files: `a*c.txt`, `abc.txt`
| Cmd Type | example | Result |
| ----- | ------------------ | ------ |
| builtin | let f = "a*c.txt"; rm $f | remove `a*c.txt` |
| builtin | let f: glob = "a*c.txt"; rm $f | remove `a*c.txt` and
`abc.txt`
| builtin | let f = "a*c.txt"; rm ($f \| into glob) | remove `a*c.txt`
and `abc.txt`
| custom | def crm [f: glob] { rm $f }; let f = "a*c.txt"; crm $f |
remove `a*c.txt` and `abc.txt`
| custom | def crm [f: glob] { rm ($f \| into string) }; let f =
"a*c.txt"; crm $f | remove `a*c.txt`
| custom | def crm [f: string] { rm $f }; let f = "a*c.txt"; crm $f |
remove `a*c.txt`
| custom | def crm [f: string] { rm $f }; let f = "a*c.txt"; crm ($f \|
into glob) | remove `a*c.txt` and `abc.txt`
In general, if a variable is annotated with `glob` type, nushell will
expand glob pattern. Or else, we need to use `into | glob` to expand
glob pattern
# Tests + Formatting
Done
# After Submitting
I think `str glob-escape` command will be no-longer required. We can
remove it.
# Description
This PR removes unused dependencies. The `cargo machete --with-metadata`
tool was used to determine what is unused and then I recompiled. Putting
this up here to see what happens in MacOS and Linux in the CI and see if
anything breaks.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Use the default configuration on panic.
Adding a line that panics to any configuration:
```nushell
# Nushell Config File
#
# version = "0.86.0"
"2031-13-31" | into datetime
```
An error message will be displayed and the shell will continue:
<img width="1016" alt="Screenshot 2024-02-22 at 10 14 25"
src="https://github.com/nushell/nushell/assets/56345/8ccff001-300a-4caf-b131-bf7b114a06e3">
Co-authored-by: Jack Wright <jack.wright@disqo.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Debug assertions don't run at release, which means that `cargo test
--release` fails because the tests for name checks don't run properly.
These checks are not really expensive, and there shouldn't be any
noticeable difference to startup time, so there isn't much reason not to
just leave them in.
It's valuable to be able to run `cargo test --release`, as that can
expose race conditions and dependencies on undefined behavior that
aren't exposed in debug builds.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
This shouldn't affect anything. Any violations of this rule were being
caught with debug tests, which are run by the CI.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
[Related conversation on
Discord](https://discord.com/channels/601130461678272522/615329862395101194/1209951539901366292)
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This allows `zip` to consume two streams at the same time without having
to choose to fully consume one of them. Helpful for combining infinite
streams, or just large ones.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Provides a way to consume another (possibly infinite) stream in `zip`,
rather than that being limited to open ranges.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Currently, `ShellError::FileNotFound` shows the span where the error
occurred but doesn't say which file wasn't found. This PR makes it so
the help includes that (like the `DirectoryNotFound` error).
# User-Facing Changes
No breaking changes, it's just that when a file can't be found, the help
will say which file couldn't be found:
# Description
Fixes: #11913
When running external command, nushell shouldn't consumes stderr
messages, if user want to redirect stderr.
# User-Facing Changes
NaN
# Tests + Formatting
Done
# After Submitting
NaN
# Description
Both `Block` and `Pipeline` had `Index`/`IndexMut` implementations to
access their elements, that are currently unused.
Explicit helpers or iteration would generally be preferred anyways but
in the current state the inner containers are `pub` and are liberally
used. (Sometimes with potentially panicking indexing or also iteration)
As it is potentially unclear what the meaning of the element from a
block or pipeline queried by a usize is, let's remove it entirely until
we come up with a better API.
# User-Facing Changes
None
Plugin authors shouldn't dig into AST internals
# Description
This PR fixes#11901. For some reason `debug info` stopped reporting
information. This hopefully fixes it. I think something changes in the
`sysinfo` crate that stopped it from working.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Hi,
Fixes#10838, where before the `date` would be formatted incorrectly,
and was not picking `LC_TIME` for time formatting, but it picked the
first locale returned by the `sys-locale` crate instead. Now it will
format time based on `LC_TIME`. For example,
```
// my locale `nl_NL.UTF-8`
❯ date now | format date '%x %X'
20-02-24 17:17:12
$env.LC_TIME = "en_US.UTF-8"
❯ date now | format date '%x %X'
02/20/2024 05:16:28 PM
```
Note that I also changed the `default_env.nu` as otherwise the Time will
show AM/PM twice. Also reason for the `chrono` update is because this
relies on a fix to upstream repo, which i initially submitted an
[issue](https://github.com/chronotope/chrono/issues/1349#event-11765363286)
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [X] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
fixes#11783
# Description
Firstly Tests for the `move` Command have been added. Afterwards some
duplicate Code has been removed and finally an error-message has been
added for when a column is tried to be moved based on itself. This
should fix#11783 .
To reiterate, the example of the initial issue now plays out as follows:
```shell
> {a: 1} | move a --after a
Error: nu:🐚:incompatible_parameters
× Incompatible parameters.
╭─[entry #1:1:15]
1 │ {a: 1} | move a --after a
· ┬ ┬
· │ ╰── relative to itself
· ╰── Column cannot be moved
╰────
```
# User-Facing Changes
The error message shown above.
# Tests + Formatting
I added some Tests for the behavior of the command. If I should add
more, please let me know but I added everything that came to mind when
thinking about the command.
---------
Co-authored-by: dannou812 <dannou281@gmail.com>
# Description
This PR allows `last` to work with ranges in the same way that `first`
does. It also adds a couple examples demonstrating it.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR addresses a minor mismatch in a keybinding name within the
`default_config.nu` file. Additionally, it applies formatting for
consistency.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Bumps [trash](https://github.com/ArturKovacs/trash) from 3.2.1 to 3.3.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/ArturKovacs/trash/releases">trash's
releases</a>.</em></p>
<blockquote>
<h2>v3.3.1</h2>
<h3>Bug Fixes</h3>
<ul>
<li>Use <code>AtomicI32</code> instead of I64 for compatibility with
<code>armel</code></li>
</ul>
<h3>Commit Statistics</h3>
<ul>
<li>1 commit contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>1 unique issue was worked on: <a
href="https://redirect.github.com/ArturKovacs/trash/issues/99">#99</a></li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong><a
href="https://redirect.github.com/ArturKovacs/trash/issues/99">#99</a></strong>
<ul>
<li>Use <code>AtomicI32</code> instead of I64 for compatibility with
<code>armel</code> (98049f1)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
<h2>v3.3.0</h2>
<h3>New Features</h3>
<ul>
<li>improved error granularity
Inform about operating-system specific errors more clearly, thus avoid
degenerating error information.</li>
</ul>
<h3>Bug Fixes</h3>
<ul>
<li>Use <code>AtomicI32</code> in tests for compatibility with
<code>armel</code> platform</li>
</ul>
<h3>Commit Statistics</h3>
<ul>
<li>5 commits contributed to the release over the course of 5 calendar
days.</li>
<li>25 days passed between releases.</li>
<li>2 commits were understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>1 unique issue was worked on: <a
href="https://redirect.github.com/ArturKovacs/trash/issues/99">#99</a></li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong><a
href="https://redirect.github.com/ArturKovacs/trash/issues/99">#99</a></strong>
<ul>
<li>Use <code>AtomicI32</code> in tests for compatibility with
<code>armel</code> platform (920ff0c)</li>
</ul>
</li>
<li><strong>Uncategorized</strong>
<ul>
<li>Improved error granularity (452be83)</li>
<li>Removed tracing. (2b1c9fa)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Byron/trash-rs/blob/master/CHANGELOG.md">trash's
changelog</a>.</em></p>
<blockquote>
<h2>3.3.1 (2024-02-12)</h2>
<h3>Bug Fixes</h3>
<ul>
<li><!-- raw HTML omitted --> Use <code>AtomicI32</code> instead of I64
for compatibility with <code>armel</code></li>
</ul>
<h3>Commit Statistics</h3>
<!-- raw HTML omitted -->
<ul>
<li>1 commit contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>1 unique issue was worked on: <a
href="https://redirect.github.com/Byron/trash-rs/issues/99">#99</a></li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong><a
href="https://redirect.github.com/Byron/trash-rs/issues/99">#99</a></strong>
<ul>
<li>Use <code>AtomicI32</code> instead of I64 for compatibility with
<code>armel</code> (<a
href="98049f1316"><code>98049f1</code></a>)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
<h2>3.3.0 (2024-02-10)</h2>
<h3>New Features</h3>
<ul>
<li><!-- raw HTML omitted --> improved error granularity
Inform about operating-system specific errors more clearly, thus avoid
degenerating error information.</li>
</ul>
<h3>Bug Fixes</h3>
<ul>
<li><!-- raw HTML omitted --> Use <code>AtomicI32</code> in tests for
compatibility with <code>armel</code> platform</li>
</ul>
<h3>Commit Statistics</h3>
<!-- raw HTML omitted -->
<ul>
<li>6 commits contributed to the release over the course of 5 calendar
days.</li>
<li>25 days passed between releases.</li>
<li>2 commits were understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>1 unique issue was worked on: <a
href="https://redirect.github.com/Byron/trash-rs/issues/99">#99</a></li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="b6e2d6c57f"><code>b6e2d6c</code></a>
Release trash v3.3.1</li>
<li><a
href="98049f1316"><code>98049f1</code></a>
fix: Use <code>AtomicI32</code> instead of I64 for compatibility with
<code>armel</code> (<a
href="https://redirect.github.com/ArturKovacs/trash/issues/99">#99</a>)</li>
<li><a
href="d0d8f26030"><code>d0d8f26</code></a>
Release trash v3.3.0</li>
<li><a
href="920ff0c69f"><code>920ff0c</code></a>
fix: Use <code>AtomicI32</code> in tests for compatibility with
<code>armel</code> platform (<a
href="https://redirect.github.com/ArturKovacs/trash/issues/99">#99</a>)</li>
<li><a
href="452be8303c"><code>452be83</code></a>
feat: improved error granularity</li>
<li><a
href="2b1c9fa2a9"><code>2b1c9fa</code></a>
Removed tracing.</li>
<li><a
href="b238938d7d"><code>b238938</code></a>
Bug fix for macOS.</li>
<li><a
href="671cef91f4"><code>671cef9</code></a>
Enhanced error reporting.</li>
<li>See full diff in <a
href="https://github.com/ArturKovacs/trash/compare/v3.2.1...v3.3.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
[//]: # (dependabot-start)
⚠️ **Dependabot is rebasing this PR** ⚠️
Rebasing might not happen immediately, so don't worry if this takes some
time.
Note: if you make any changes to this PR yourself, they will take
precedence over the rebase.
---
[//]: # (dependabot-end)
Bumps [fancy-regex](https://github.com/fancy-regex/fancy-regex) from
0.12.0 to 0.13.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/fancy-regex/fancy-regex/releases">fancy-regex's
releases</a>.</em></p>
<blockquote>
<h2>0.13.0</h2>
<h3>Added</h3>
<ul>
<li>Support for relative backreferences using <code>\k<-1></code>
(-1 references the
previous group) (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/121">#121</a>)</li>
<li>Add <code>try_replacen</code> to <code>Regex</code> which returns a
<code>Result</code> instead of panicking
when matching errors (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/130">#130</a>)</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Switch from regex crate to regex-automata and regex-syntax (lower
level APIs)
to simplify internals (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/121">#121</a>)</li>
<li>Allow escaping some letters in character classes, e.g.
<code>[\A]</code> used to error
but now matches the same as <code>[A]</code> (for compatibility with
Oniguruma)</li>
<li>MSRV (minimum supported Rust version) is now 1.66.1 (from
1.61.0)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fix index out of bounds panic when parsing unclosed <code>(?(</code>
(<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/125">#125</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/fancy-regex/fancy-regex/blob/main/CHANGELOG.md">fancy-regex's
changelog</a>.</em></p>
<blockquote>
<h2>[0.13.0] - 2023-12-22</h2>
<h3>Added</h3>
<ul>
<li>Support for relative backreferences using <code>\k<-1></code>
(-1 references the
previous group) (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/121">#121</a>)</li>
<li>Add <code>try_replacen</code> to <code>Regex</code> which returns a
<code>Result</code> instead of panicking
when matching errors (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/130">#130</a>)</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Switch from regex crate to regex-automata and regex-syntax (lower
level APIs)
to simplify internals (<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/121">#121</a>)</li>
<li>Allow escaping some letters in character classes, e.g.
<code>[\A]</code> used to error
but now matches the same as <code>[A]</code> (for compatibility with
Oniguruma)</li>
<li>MSRV (minimum supported Rust version) is now 1.66.1 (from
1.61.0)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fix index out of bounds panic when parsing unclosed <code>(?(</code>
(<a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/125">#125</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="bf2c807447"><code>bf2c807</code></a>
Version 0.13.0</li>
<li><a
href="7b4ad1178d"><code>7b4ad11</code></a>
Merge pull request <a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/129">#129</a>
from fancy-regex/changelog-0.13</li>
<li><a
href="8d8ea4fcf9"><code>8d8ea4f</code></a>
Document how to check matching in Oniguruma</li>
<li><a
href="1fab2c7e0b"><code>1fab2c7</code></a>
Add character class escaping change</li>
<li><a
href="2d6339584d"><code>2d63395</code></a>
Add try_replacen</li>
<li><a
href="6deb4fc1b2"><code>6deb4fc</code></a>
Prepare CHANGELOG for next release</li>
<li><a
href="c0e701f821"><code>c0e701f</code></a>
Merge pull request <a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/130">#130</a>
from kevinhu/try_replacen</li>
<li><a
href="55f6549bec"><code>55f6549</code></a>
Add try_replacen</li>
<li><a
href="8ab3a44053"><code>8ab3a44</code></a>
Merge branch 'fancy-regex:main' into main</li>
<li><a
href="494cd931c3"><code>494cd93</code></a>
Merge pull request <a
href="https://redirect.github.com/fancy-regex/fancy-regex/issues/126">#126</a>
from robertknight/patch-1</li>
<li>Additional commits viewable in <a
href="https://github.com/fancy-regex/fancy-regex/compare/0.12.0...0.13.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [miette](https://github.com/zkat/miette) from 7.0.0 to 7.1.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/zkat/miette/releases">miette's
releases</a>.</em></p>
<blockquote>
<h2>v7.1.0</h2>
<h3>Features</h3>
<ul>
<li><strong>derive:</strong> enable more boxed types to be
#[diagnostic_source] (<a
href="https://redirect.github.com/zkat/miette/issues/338">#338</a>) (<a
href="c2f06f6cca">c2f06f6c</a>)</li>
<li><strong>source:</strong> derive common traits for NamedSource,
SourceSpan, and SourceOffset (<a
href="https://redirect.github.com/zkat/miette/issues/340">#340</a>) (<a
href="6f09250cca">6f09250c</a>)</li>
<li><strong>collection:</strong> add support for collection of labels
(<a href="https://redirect.github.com/zkat/miette/issues/341">#341</a>)
(<a
href="03060245d8">03060245</a>)</li>
</ul>
<h3>Bug Fixes</h3>
<ul>
<li><strong>tests:</strong> revert test-breaking changes of e5c7ae4 (<a
href="https://redirect.github.com/zkat/miette/issues/339">#339</a>) (<a
href="6e829f8c0c">6e829f8c</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/zkat/miette/blob/main/CHANGELOG.md">miette's
changelog</a>.</em></p>
<blockquote>
<h2>7.1.0 (2024-02-16)</h2>
<h3>Features</h3>
<ul>
<li><strong>derive:</strong> enable more boxed types to be
#[diagnostic_source] (<a
href="https://redirect.github.com/zkat/miette/issues/338">#338</a>) (<a
href="c2f06f6cca">c2f06f6c</a>)</li>
<li><strong>source:</strong> derive common traits for NamedSource,
SourceSpan, and SourceOffset (<a
href="https://redirect.github.com/zkat/miette/issues/340">#340</a>) (<a
href="6f09250cca">6f09250c</a>)</li>
<li><strong>collection:</strong> add support for collection of labels
(<a href="https://redirect.github.com/zkat/miette/issues/341">#341</a>)
(<a
href="03060245d8">03060245</a>)</li>
</ul>
<h3>Bug Fixes</h3>
<ul>
<li><strong>tests:</strong> revert test-breaking changes of e5c7ae4 (<a
href="https://redirect.github.com/zkat/miette/issues/339">#339</a>) (<a
href="6e829f8c0c">6e829f8c</a>)</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="a18a6444d9"><code>a18a644</code></a>
chore: Release</li>
<li><a
href="dc77b0cb5b"><code>dc77b0c</code></a>
docs: update changelog</li>
<li><a
href="03060245d8"><code>0306024</code></a>
feat(collection): add support for collection of labels (<a
href="https://redirect.github.com/zkat/miette/issues/341">#341</a>)</li>
<li><a
href="6f09250cca"><code>6f09250</code></a>
feat(source): derive common traits for NamedSource, SourceSpan, and
SourceOff...</li>
<li><a
href="c2f06f6cca"><code>c2f06f6</code></a>
feat(derive): enable more boxed types to be #[diagnostic_source] (<a
href="https://redirect.github.com/zkat/miette/issues/338">#338</a>)</li>
<li><a
href="6e829f8c0c"><code>6e829f8</code></a>
fix(tests): revert test-breaking changes of e5c7ae4 (<a
href="https://redirect.github.com/zkat/miette/issues/339">#339</a>)</li>
<li>See full diff in <a
href="https://github.com/zkat/miette/compare/miette-derive-v7.0.0...miette-derive-v7.1.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [serial_test](https://github.com/palfrey/serial_test) from 2.0.0
to 3.0.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/palfrey/serial_test/releases">serial_test's
releases</a>.</em></p>
<blockquote>
<h2>v3.0.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Multi key support <a
href="https://redirect.github.com/palfrey/serial_test/pull/102">palfrey/serial_test#102</a>
<ul>
<li>Attributes like <code>#[serial(one, two)]</code> are now supported
(for all attributes)</li>
<li>This is a breaking change, as <code>file_serial</code> paths now
need to be done separately <code>#[file_serial(key, path =>
"/tmp/foo")]</code></li>
</ul>
</li>
<li>Attributes at a mod-level <a
href="https://redirect.github.com/palfrey/serial_test/pull/104">palfrey/serial_test#104</a>
<ul>
<li>You can set any of the attributes on a <code>mod</code> and all
<code>#[test]</code> fn's in that mod will have the attribute
applied.</li>
</ul>
</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/palfrey/serial_test/compare/v2.0.0...v3.0.0">https://github.com/palfrey/serial_test/compare/v2.0.0...v3.0.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="bba3db847f"><code>bba3db8</code></a>
3.0.0</li>
<li><a
href="ae14645ea1"><code>ae14645</code></a>
Merge pull request <a
href="https://redirect.github.com/palfrey/serial_test/issues/104">#104</a>
from palfrey/serial-for-mod</li>
<li><a
href="0dec256fe1"><code>0dec256</code></a>
Merge branch 'main' into serial-for-mod</li>
<li><a
href="cee1dc17db"><code>cee1dc1</code></a>
Add testing and parallel to package keywords</li>
<li><a
href="2a4b641ea9"><code>2a4b641</code></a>
Merge branch 'main' into serial-for-mod</li>
<li><a
href="288d933b77"><code>288d933</code></a>
Merge pull request <a
href="https://redirect.github.com/palfrey/serial_test/issues/105">#105</a>
from palfrey/upgrade-rustix</li>
<li><a
href="cf9d7fef62"><code>cf9d7fe</code></a>
Upgrade rustix</li>
<li><a
href="a8d985d9fd"><code>a8d985d</code></a>
Replace a single-use match with if let</li>
<li><a
href="67d22ff9ee"><code>67d22ff</code></a>
Fix some clippy issues</li>
<li><a
href="ff2890d91b"><code>ff2890d</code></a>
Update docs for mod-level functionality</li>
<li>Additional commits viewable in <a
href="https://github.com/palfrey/serial_test/compare/v2.0.0...v3.0.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps
[unicode-segmentation](https://github.com/unicode-rs/unicode-segmentation)
from 1.10.1 to 1.11.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8b894ca626"><code>8b894ca</code></a>
Bump to 1.11.0</li>
<li><a
href="184277a5f2"><code>184277a</code></a>
Merge pull request <a
href="https://redirect.github.com/unicode-rs/unicode-segmentation/issues/130">#130</a>
from syvb/rm_old_docs</li>
<li><a
href="bfe98e4642"><code>bfe98e4</code></a>
Remove outdated documentation link in Cargo.toml</li>
<li><a
href="062c264acf"><code>062c264</code></a>
Merge pull request <a
href="https://redirect.github.com/unicode-rs/unicode-segmentation/issues/128">#128</a>
from ryanavella/master</li>
<li><a
href="6375d1e431"><code>6375d1e</code></a>
Adding missing size_hint implementations.</li>
<li><a
href="e718ec3132"><code>e718ec3</code></a>
Merge pull request <a
href="https://redirect.github.com/unicode-rs/unicode-segmentation/issues/127">#127</a>
from nicolasmendoza/docs/update-changelogs-from-v1.9....</li>
<li><a
href="e9104b117d"><code>e9104b1</code></a>
Fix: Remove duplicate changelog</li>
<li><a
href="30a3e6bab2"><code>30a3e6b</code></a>
docs: Update changelog for versions 1.9.0 to 1.10.1</li>
<li><a
href="eb794dda07"><code>eb794dd</code></a>
docs: Update changelog for versions 1.9.0 to 1.10.1</li>
<li><a
href="8d165c5842"><code>8d165c5</code></a>
Merge pull request <a
href="https://redirect.github.com/unicode-rs/unicode-segmentation/issues/126">#126</a>
from nicolasmendoza/docs/update-changelogs</li>
<li>Additional commits viewable in <a
href="https://github.com/unicode-rs/unicode-segmentation/compare/v1.10.1...v1.11.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Related issue and PR, #11825#11864
This improves the signature of `commandline`.
## Before
`commandline` returns different types depending on the flags and an
aurgument.
| command | input | output | description |
|-----------------------------|---------|---------|----------------------------------------|
| `commandline` | nothing | string | get current cursor line |
| `commandline arg` | nothing | nothing | replace the cursor line with
`arg` |
| `commandline --append arg` | nothing | nothing | append `arg` to the
end of cursor line |
| `commandline --insert arg` | nothing | nothing | insert `arg` to the
position of cursor |
| `commandline --replace arg` | nothing | nothing | replace the cursor
line with `arg` |
| `commandline --cursor` | nothing | int | get current cursor position |
| `commandline --cursor pos` | nothing | nothing | set cursor position
to pos |
| `commandline --cursor-end` | nothing | nothing | set cursor position
to end |
`help commandline` shows that `commandline` accepts string as pipeline
input, but `commandline` ignores pipeline input.
```
Input/output types:
╭───┬─────────┬─────────╮
│ # │ input │ output │
├───┼─────────┼─────────┤
│ 0 │ nothing │ nothing │
│ 1 │ string │ string │
╰───┴─────────┴─────────╯
```
671bd08bcd/crates/nu-cli/src/commands/commandline.rs (L70)
This is misleading.
Due to the change #11864 , typecheck does not work well.
https://github.com/nushell/nushell/pull/11864#discussion_r1491814054
## After
Separate `commandline` into subcommands so that each subcommands returns
the same type for the same input type.
| command | input | output | description |
|----------------------------------|---------|---------|----------------------------------------|
| `commandline` | nothing | string | get current cursor line |
| `commandline edit arg` | nothing | nothing | replace the cursor line
with `arg` |
| `commandline edit --append arg` | nothing | nothing | append `arg` to
the end of cursor line |
| `commandline edit --insert arg` | nothing | nothing | insert `arg` to
the position of cursor |
| `commandline edit --replace arg` | nothing | nothing | replace the
cursor line with `arg` |
| `commandline get-cursor` | nothing | int | get current cursor position
|
| `commandline set-cursor pos` | nothing | nothing | set cursor position
to pos |
| `commandline set-cursor --end` | nothing | nothing | set cursor
position to end |
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Following #11851, this PR adds one final conversion function for
`Value`. `Value::coerce_str` takes a `&Value` and converts it to a
`Cow<str>`, creating an owned `String` for types that needed converting.
Otherwise, it returns a borrowed `str` for `String` and `Binary`
`Value`s which avoids a clone/allocation. Where possible, `coerce_str`
and `coerce_into_string` should be used instead of `coerce_string`,
since `coerce_string` always allocates a new `String`.
# Description
Same procedure as #11881
Remove unused variants to avoid confusion and foster better practices
around error variants.
- Remove `SE::PermissionDeniedError`
- Remove `SE::OutOfMemoryError`
- Remove `SE::DirectoryNotFoundCustom`
- Remove `SE::MoveNotPossibleSingle`
- Remove `SE::NonUnicodeInput`
# User-Facing Changes
Plugin authors may have matched against or emitted those variants
# Description
Error variants never raised should be removed to avoid confusion and
make sure we choose the proper variants in the future
- Remove unused `ParseError::InvalidModuleFileName`
- Remove unused `ParseError::NotFound`
- Remove unused `ParseError::MissingImportPattern`
- Remove unused `ParseError::ReadingFile`
# User-Facing Changes
None for users.
Insignificant for plugin authors as they interact only with `ShellError`
# Description
nushell is verified to work on FreeBSD 14 with these patches.
What isn't supported on FreeBSD:
* the crate 'procfs' doesn't support FreeBSD yet, all functionality
depending on procfs is disabled
* several RLIMIT_* values aren't supported on FreeBSD - functions
related to these are disabled
# User-Facing Changes
n/a
# Tests + Formatting
n/a
# After Submitting
n/a
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
This PR renames the conversion functions on `Value` to be more consistent.
It follows the Rust [API guidelines](https://rust-lang.github.io/api-guidelines/naming.html#ad-hoc-conversions-follow-as_-to_-into_-conventions-c-conv) for ad-hoc conversions.
The conversion functions on `Value` now come in a few forms:
- `coerce_{type}` takes a `&Value` and attempts to convert the value to
`type` (e.g., `i64` are converted to `f64`). This is the old behavior of
some of the `as_{type}` functions -- these functions have simply been
renamed to better reflect what they do.
- The new `as_{type}` functions take a `&Value` and returns an `Ok`
result only if the value is of `type` (no conversion is attempted). The
returned value will be borrowed if `type` is non-`Copy`, otherwise an
owned value is returned.
- `into_{type}` exists for non-`Copy` types, but otherwise does not
attempt conversion just like `as_type`. It takes an owned `Value` and
always returns an owned result.
- `coerce_into_{type}` has the same relationship with `coerce_{type}` as
`into_{type}` does with `as_{type}`.
- `to_{kind}_string`: conversion to different string formats (debug,
abbreviated, etc.). Only two of the old string conversion functions were
removed, the rest have been renamed only.
- `to_{type}`: other conversion functions. Currently, only `to_path`
exists. (And `to_string` through `Display`.)
This table summaries the above:
| Form | Cost | Input Ownership | Output Ownership | Converts `Value`
case/`type` |
| ---------------------------- | ----- | --------------- |
---------------- | -------- |
| `as_{type}` | Cheap | Borrowed | Borrowed/Owned | No |
| `into_{type}` | Cheap | Owned | Owned | No |
| `coerce_{type}` | Cheap | Borrowed | Borrowed/Owned | Yes |
| `coerce_into_{type}` | Cheap | Owned | Owned | Yes |
| `to_{kind}_string` | Expensive | Borrowed | Owned | Yes |
| `to_{type}` | Expensive | Borrowed | Owned | Yes |
# User-Facing Changes
Breaking API change for `Value` in `nu-protocol` which is exposed as
part of the plugin API.
# Description
This updates nushell to the latest reedline and rusqlite dependencies.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Just randomly found a redundant clone. Seems to work just fine without
it.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Fix#11732
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Invalid output format causes an error, not a panic.
```nu
❯ seq date --output-format '%H-%M-%S'
Error: × Invalid output format
╭─[entry #1:1:1]
1 │ seq date --output-format '%H-%M-%S'
· ────┬───
· ╰── an error occurred when formatting an argument
╰────
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes (most of) #11796. Some filesystem commands have a required
positional argument which hinders spreading rest args. This PR removes
the required positional arg from `rm`, `open`, and `touch` to be
consistent with other filesystem commands that already only have a
single rest arg (`mkdir` and `cp`).
# User-Facing Changes
`rm`, `open`, and `touch` might no longer error when they used to, but
otherwise there should be no noticeable changes.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix#11825
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`commandline --cursor` returns int.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Requires each of the rest args for `select` and `reject` to be a cell
path instead of the current `oneof(cellpath, list<cellpath>`. This
simplifies the command signatures and code for `select` and `reject`.
Users can now spread lists into the rest arguments instead of providing
them as is.
For example,
```nushell
ls | select [name size]
```
must now be
```nushell
ls | select ...[name size]
```
# User-Facing Changes
Breaking change for the `select` and `reject` command signatures.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Spreading lists automatically when calling externals was deprecated in
0.89 (#11289), and this PR is to remove it in 0.91.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
The new error message looks like this:
```
> ^echo [1 2]
Error: nu:🐚:cannot_pass_list_to_external
× Lists are not automatically spread when calling external commands
╭─[entry #13:1:8]
1 │ ^echo [1 2]
· ──┬──
· ╰── Spread operator (...) is necessary to spread lists
╰────
help: Either convert the list to a string or use the spread operator, like so: ...[1 2]
```
The old error message didn't say exactly where to put the `...` and
seemed to confuse a lot of people, so hopefully this helps.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
There was one test to check that implicit spread was deprecated before,
updated that to check that it's disallowed now.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Update a few defaults.
1. use_ls_colors_completeions defaults to true.
2. make ide_menu only offer 10 completions at a time with
`max_completion_height = 10` instead of taking the entire screen.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
With this PR i try to resolve#11751
# Description
I am rather new to Rust so if anything is not the way it should be
please let me know.
As described in the title I just fixed the date conversion in the to and
from toml commands as i thought it would be a good first issue. The
example of the original issue will now work as follows:
```
~> {date: 2024-02-02} | to toml
date = "2024-02-02T00:00:00+00:00"
~> "dob = 1979-05-27T07:32:00-08:00" | from toml
╭─────┬───────────────────────────╮
│ dob │ 44 years ago |
╰─────┴───────────────────────────╯
```
The `from toml` command now returns a nushell date which is displayed as
`44 years ago` in this case.
# User-Facing Changes
none
# Tests + Formatting
all tests pass and formatting has been applied
---------
Co-authored-by: dannou812 <dannou281@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Simplify the tilde substitution in `create_left_prompt` by using `path
relative-to`.
# User-Facing Changes
The default `env.nu` is simpler.
# Tests
I've been happily using this formulation in my prompt command for a
while now.
# Description
Bump polars from 0.36 to 0.37
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This fixes a panic with the text selection.
Reference
https://github.com/nushell/reedline/pull/751https://github.com/nushell/reedline/issues/750https://github.com/nushell/reedline/pull/689#issuecomment-1934813606
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
There have been some PRs landed in reedline so it's good to test them
and keep nushell up to date.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
`ls` and other file completions uses `LS_COLORS`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Today rust version 1.76.0 was released so we bump nushell to 1.74.1.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Close: #9673Close: #8277Close: #10944
This pr introduces the following syntax:
1. `e>|`, pipe stderr to next command. Example: `$env.FOO=bar nu
--testbin echo_env_stderr FOO e>| str length`
2. `o+e>|` and `e+o>|`, pipe both stdout and stderr to next command,
example: `$env.FOO=bar nu --testbin echo_env_mixed out-err FOO FOO e+o>|
str length`
Note: it only works for external commands. ~There is no different for
internal commands, that is, the following three commands do the same
things:~ Edit: it raises errors if we want to pipes for internal
commands
```
❯ ls e>| str length
Error: × `e>|` only works with external streams
╭─[entry #1:1:1]
1 │ ls e>| str length
· ─┬─
· ╰── `e>|` only works on external streams
╰────
❯ ls e+o>| str length
Error: × `o+e>|` only works with external streams
╭─[entry #2:1:1]
1 │ ls e+o>| str length
· ──┬──
· ╰── `o+e>|` only works on external streams
╰────
```
This can help us to avoid some strange issues like the following:
`$env.FOO=bar (nu --testbin echo_env_stderr FOO) e>| str length`
Which is hard to understand and hard to explain to users.
# User-Facing Changes
Nan
# Tests + Formatting
To be done
# After Submitting
Maybe update documentation about these syntax.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Bump miette from 5.10.0 to 7.0.0
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Clippy fixes for
[items_after_test_module](https://rust-lang.github.io/rust-clippy/master/index.html#/items_after_test_module)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix#9878
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Writing comments in match blocks will be allowed.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
When using a table (or a list of records) as input to `input list`,
allow specifying a cellpath for the field/column to use as the display
value.
For instance, at the moment, using a table as input results in the
following:
```
❯ [[name price]; [Banana 12] [Kiwi 4] [Pear 7]] | input list
> {name: Banana, price: 12}
{name: Kiwi, price: 4}
{name: Pear, price: 7}
```
With the new `--display` flag introduced by this PR, you can do the
following:
```
❯ [[name price]; [Banana 12] [Kiwi 4] [Pear 7]] | input list -d name
> Banana
Kiwi
Pear
```
Note that it doesn't change what gets returned after selecting an item:
the full row/record is still returned.
# User-Facing Changes
A new optional flag is allowed.
# Tests + Formatting
# After Submitting
# Description
Does a little cleanup in `record.rs`:
- Makes the `record!` macro more hygienic.
- Converts regular comments to doc comments from #11718.
- Converts the `Record` iterators to new types.
# Description
Fixes: https://github.com/nushell/nushell/issues/11762
The auto-completion is somehow annoying if a path contains a glob
pattern, let's say if user type `ls` and it auto-completes to <code>ls
`[a] bc.txt`</code>, and user can't list the file because it's backtick
quoted.
This pr is going to fix it.
# User-Facing Changes
### Before
```
❯ | ls
`[a] bc.txt` `a bc`
```
### After
```
❯ | ls
"[a] bc.txt" `a bc`
```
# Tests + Formatting
Done
# After Submitting
NaN
# Description
Previously, only direcly-recursive calls were checked for recursion
depth. But most recursive calls in nushell are mutually recursive since
expressions like `for`, `where`, `try` and `do` all execute a separte
block.
```nushell
def f [] {
do { f }
}
```
Calling `f` would crash nushell with a stack overflow.
I think the only general way to prevent such a stack overflow is to
enforce a maximum call stack depth instead of only disallowing directly
recursive calls.
This commit also moves that logic into `eval_call()` instead of
`eval_block()` because the recursion limit is tracked in the `Stack`,
but not all blocks are evaluated in a new stack. Incrementing the
recursion depth of the caller's stack would permanently increment that
for all future calls.
Fixes#11667
# User-Facing Changes
Any function call can now fail with `recursion_limit_reached` instead of
just directly recursive calls. Mutually-recursive calls no longer crash
nushell.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR makes the `char` command a `const` command. The only real
changes are to get the arguments different and I extracted code into
functions so they could be called via run and run_cost. No algorithms
were harmed in the making of this PR.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR help `ansi strip` work on more nushell values. It does this by
converting values like filesize and dates to strings. This may not be
precisely correct but I think it does more what the user expects.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR allows `into value` to recognize ints and change them into file
sizes if you prefer.
### Before
```nushell
❯ free | ^column -t | lines | update 0 {$"type ($in)"} | to text | ^column -t | detect columns | into value
╭─#─┬─type──┬──total───┬──used───┬───free───┬shared┬buff/cache┬available─╮
│ 0 │ Mem: │ 24614036 │ 3367680 │ 16196240 │ 3688 │ 5449736 │ 21246356 │
│ 1 │ Swap: │ 6291456 │ 0 │ 6291456 │ │ │ │
╰───┴───────┴──────────┴─────────┴──────────┴──────┴──────────┴──────────╯
```
### After
```nushell
❯ free | ^column -t | lines | update 0 {$"type ($in)"} | to text | ^column -t | detect columns | into value --prefer-filesizes
╭─#─┬─type──┬──total──┬──used──┬──free───┬─shared─┬buff/cache┬available╮
│ 0 │ Mem: │ 24.6 MB │ 3.4 MB │ 16.2 MB │ 3.7 KB │ 5.4 MB │ 21.2 MB │
│ 1 │ Swap: │ 6.3 MB │ 0 B │ 6.3 MB │ │ │ │
╰───┴───────┴─────────┴────────┴─────────┴────────┴──────────┴─────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Bump nushell version to the dev version of 0.90.2
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Merge after https://github.com/nushell/nushell/pull/11786
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
See full release notes:
https://github.com/nushell/reedline/releases/tag/v0.29.0
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes `into int` and `into filesize` so that they allow
thousands separators.
### Before
```nushell
❯ '1,000' | into filesize
Error: nu:🐚:cant_convert
× Can't convert to int.
╭─[entry #1:1:1]
1 │ '1,000' | into filesize
· ───┬───
· ╰── can't convert string to int
╰────
❯ '1,000' | into int
Error: nu:🐚:cant_convert
× Can't convert to int.
╭─[entry #2:1:1]
1 │ '1,000' | into int
· ────┬───
· ╰── can't convert string to int
╰────
help: string "1,000" does not represent a valid integer
```
### After
```nushell
❯ '1,000' | into filesize
1.0 KB
❯ '1,000' | into int
1000
```
This works by getting the system locale and from that, determining what
the thousands separator is. So, hopefully, this will work across
locales.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes https://github.com/nushell/nushell/issues/11716
The problem is in our [record creation
API](0d518bf813/crates/nu-protocol/src/value/record.rs (L33))
which panics if the numbers of columns and values are different. I added
a safe variant that returns a `Result` and used it in the `rotate`
command.
## TODO in another PR:
Go through all `from_raw_cols_vals_unchecked()` (this includes the
`record!` macro which uses the unchecked version) and make sure that
either
a) it is guaranteed the number of cols and vals is the same, or
b) convert the call to `from_raw_cols_vals()`
Reason: Nushell should never panic.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes https://github.com/nushell/nushell/issues/11711
Previously, syntax `def a [] (echo 4)` was allowed to parse and then
failed with panic duting eval.
Current error:
```
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #1:1:1]
1 │ def a [] (echo 4)
· ────┬───
· ╰── expected definition body closure { ... }
╰────
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
## Problem
I tried converting one of my Rust web scrapers to Nushell just to see
how it would be done, but quickly ran into an issue that proved annoying
to fix without diving into the source.
For instance, let's say we have the following HTML
```html
<p>Hello there, <span style="color: red;">World</span></p>
```
and we want to extract only the text within the `p` element, but not the
`span`. With the current version of nu_plugin_query, if we run this code
```nushell
echo `<p>Hello there, <span style="color: red;">World</span></p>` | query web -q "p" | get 0
# returns "Hello there, World"
# but we want only "Hello there, "
```
we will get back a `list<string>` that contains 1 string `Hello there,
World`.
To avoid scraping the span, we would have to do something like this
```nushell
const html = `<p>Hello there, <span style="color: red;">World</span></p>`
$html
| query web -q "p"
| get 0
| str replace ($html | query web -q "p > span" | get 0) ""
# returns "Hello there, "
```
In other words, we would have to make a sub scrape of the text we
*don't* want in order to subtract it from the text we *do* want.
## Solution
I didn't like this behavior, so I decided to change it. I modified the
`execute_selector_query` function to collect all text nodes in the HTML
element matching the query. Now `query web --query` will return a
`list<list<string>>`
```nushell
echo `<p>Hello there, <span style="color: red;">World</span></p>` | query web -q "p" | get 0 | to json --raw
# returns ["Hello there, ","World"]
```
This also brings `query web --query`'s behavior more in line with
[scraper's
ElementRef::text()](https://docs.rs/scraper/latest/scraper/element_ref/struct.ElementRef.html#method.text)
which "Returns an iterator over descendent text nodes", allowing you to
choose how much of an element's text you want to scrape without
resorting to string substitutions.
## Consequences
As this is a user-facing change, the usage examples will produce
different results than before. For example
```nushell
http get https://phoronix.com | query web --query 'header'
```
will return a list of lists of 1 string each, whereas before it was just
a list of strings.
I only modified the 3rd example
```nushell
# old
http get https://www.nushell.sh | query web --query 'h2, h2 + p' | group 2 | each {rotate --ccw tagline description} | flatten
# new
http get https://www.nushell.sh | query web --query 'h2, h2 + p' | each {str join} | group 2 | each {rotate --ccw tagline description} | flatten
```
to make it behave like before because I thought this one ought to show
the same results as before.
However, the second reason I changed the 3rd example is because it
otherwise panics! If we run the original 3rd example with my
modifications, we get a panic
```
thread 'main' panicked at crates/nu-protocol/src/value/record.rs:34:9:
assertion `left == right` failed
left: 2
right: 17
```
This happens because `rotate` receives a list of lists where the inner
lists have a different number of elements.
However this panic is unrelated to the changes I've made, because it can
be triggered easily without using the plugin. For instance
```nushell
# this is fine
[[[one] [two]] [[three] [four]]] | each {rotate --ccw tagline description}
# this panics!
[[[one] [two]] [[three] [four five]]] | each {rotate --ccw tagline description}
```
Though beyond the scope of this PR, I thought I'd mention this bug since
I found it while testing the usage examples. However, I intend to make a
proper issue about it tomorrow.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`query web --query "css selector"` now returns a `list<list<string>>`
instead of a `list<string>` to make it more in line with [scraper's
ElementRef::text()](https://docs.rs/scraper/latest/scraper/element_ref/struct.ElementRef.html#method.text).
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I ran `cargo fmt --all -- --check`, `cargo clippy --workspace -- -D
warnings -D clippy::unwrap_used` and the tests in the plugin.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
PR that updates the documentation to match the new 3rd example:
https://github.com/nushell/nushell.github.io/pull/1235
# Description
This PR updates to the latest reedline after the column menu fix.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tries to make `query web` more resilient and easier to debug
with the `--inspect` parameter when trying to scrape tables. Previously
it would just fail, now at least it tries to give you a hint.
This is some example output now of when something went wrong.
```
❯ http get https://en.wikipedia.org/wiki/List_of_cities_in_India_by_population | query web --as-table [Rank City 'Population(2011)[3]' 'Population(2001)[3][a]' 'State or union territory'] --inspect
Passed in Column Headers = ["Rank", "City", "Population(2011)[3]", "Population(2001)[3][a]", "State or union territory"]
First 2048 HTML chars = <!DOCTYPE html>
<html class="client-nojs vector-feature-language-in-header-enabled vector-feature-language-in-main-page-header-disabled vector-feature-sticky-header-disabled vector-feature-page-tools-pinned-disabled vector-feature-toc-pinned-clientpref-1 vector-feature-main-menu-pinned-disabled vector-feature-limited-width-clientpref-1 vector-feature-limited-width-content-enabled vector-feature-custom-font-size-clientpref-0 vector-feature-client-preferences-disabled vector-feature-client-prefs-pinned-disabled vector-toc-available" lang="en" dir="ltr">
<head>
<meta charset="UTF-8">
<title>List of cities in India by population - Wikipedia</title>
<script>(function(){var className="client-js vector-feature-language-in-header-enabled vector-feature-language-in-main-page-header-disabled vector-feature-sticky-header-disabled vector-feature-page-tools-pinned-disabled vector-feature-toc-pinned-clientpref-1 vector-feature-main-menu-pinned-disabled vector-feature-limited-width-clientpref-1 vector-feature-limited-width-content-enabled vector-feature-custom-font-size-clientpref-0 vector-feature-client-preferences-disabled vector-feature-client-prefs-pinned-disabled vector-toc-available";var cookie=document.cookie.match(/(?:^|; )enwikimwclientpreferences=([^;]+)/);if(cookie){cookie[1].split('%2C').forEach(function(pref){className=className.replace(new RegExp('(^| )'+pref.replace(/-clientpref-\w+$|[^\w-]+/g,'')+'-clientpref-\\w+( |$)'),'$1'+pref+'$2');});}document.documentElement.className=className;}());RLCONF={"wgBreakFrames":false,"wgSeparatorTransformTable":["",""],"wgDigitTransformTable":["",""],"wgDefaultDateFormat":"dmy","wgMonthNames":["",
"January","February","March","April","May","June","July","August","September","October","November","December"],"wgRequestId":"9ecdad8f-2dbd-4245-b54d-9c57aea5ca45","wgCanonicalNamespace":"","wgCanonicalSpecialPageName":false,"wgNamespaceNumber":0,"wgPageName":"List_of_cities_in_India_by_population","wgTitle":"List of cities in India by population","wgCurRevisionId":1192093210,"wgRev
Potential HTML Headers = ["City", "Population(2011)[3]", "Population(2001)[3][a]", "State or unionterritory", "Ref"]
Potential HTML Headers = ["City", "Population(2011)[5]", "Population(2001)", "State or unionterritory"]
Potential HTML Headers = [".mw-parser-output .navbar{display:inline;font-size:88%;font-weight:normal}.mw-parser-output .navbar-collapse{float:left;text-align:left}.mw-parser-output .navbar-boxtext{word-spacing:0}.mw-parser-output .navbar ul{display:inline-block;white-space:nowrap;line-height:inherit}.mw-parser-output .navbar-brackets::before{margin-right:-0.125em;content:\"[ \"}.mw-parser-output .navbar-brackets::after{margin-left:-0.125em;content:\" ]\"}.mw-parser-output .navbar li{word-spacing:-0.125em}.mw-parser-output .navbar a>span,.mw-parser-output .navbar a>abbr{text-decoration:inherit}.mw-parser-output .navbar-mini abbr{font-variant:small-caps;border-bottom:none;text-decoration:none;cursor:inherit}.mw-parser-output .navbar-ct-full{font-size:114%;margin:0 7em}.mw-parser-output .navbar-ct-mini{font-size:114%;margin:0 4em}vtePopulation of cities in India"]
Potential HTML Headers = ["vteGeography of India"]
╭──────────────────────────┬─────────────────────────────────────────────────────╮
│ Rank │ error: no data found (column name may be incorrect) │
│ City │ error: no data found (column name may be incorrect) │
│ Population(2011)[3] │ error: no data found (column name may be incorrect) │
│ Population(2001)[3][a] │ error: no data found (column name may be incorrect) │
│ State or union territory │ error: no data found (column name may be incorrect) │
╰──────────────────────────┴─────────────────────────────────────────────────────╯
```
The key here is to look at the `Passed in Column Headers` and compare
them to the `Potential HTML Headers` and couple that with the error
table at the bottom should give you a hint that, in this situation,
wikipedia has changed the column names, yet again. So we need to update
our query web statement's tables to get closer to what we want.
```
❯ http get https://en.wikipedia.org/wiki/List_of_cities_in_India_by_population | query web --as-table [City 'Population(2011)[3]' 'Population(2001)[3][a]' 'State or unionterritory' 'Ref']
╭─#──┬───────City───────┬─Population(2011)[3]─┬─Population(2001)[3][a]─┬─State or unionterritory─┬──Ref───╮
│ 0 │ Mumbai │ 12,442,373 │ 11,978,450 │ Maharashtra │ [3] │
│ 1 │ Delhi │ 11,034,555 │ 9,879,172 │ Delhi │ [3] │
│ 2 │ Bangalore │ 8,443,675 │ 5,682,293 │ Karnataka │ [3] │
│ 3 │ Hyderabad │ 6,993,262 │ 5,496,960 │ Telangana │ [3] │
│ 4 │ Ahmedabad │ 5,577,940 │ 4,470,006 │ Gujarat │ [3] │
│ 5 │ Chennai │ 4,646,732 │ 4,343,645 │ Tamil Nadu │ [3] │
│ 6 │ Kolkata │ 4,496,694 │ 4,580,546 │ West Bengal │ [3] │
│ 7 │ Surat │ 4,467,797 │ 2,788,126 │ Gujarat │ [3] │
│ 8 │ Pune │ 3,124,458 │ 2,538,473 │ Maharashtra │ [3] │
│ 9 │ Jaipur │ 3,046,163 │ 2,322,575 │ Rajasthan │ [3] │
│ 10 │ Lucknow │ 2,817,105 │ 2,185,927 │ Uttar Pradesh │ [3] │
│ 11 │ Kanpur │ 2,765,348 │ 2,551,337 │ Uttar Pradesh │ [3] │
│ 12 │ Nagpur │ 2,405,665 │ 2,052,066 │ Maharashtra │ [3] │
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Let's disable riscv64 build target temporarily to make release and
nightly-build workflow work, close#11604
We will add this target later if the related issue got fixed
# Description
Fixes: #11683
# User-Facing Changes
NaN
# Tests + Formatting
~~I don't think we need to add a test, or else it'll copy some file to
user's directory, it seems bad.~~
Done.
# After Submitting
NaN
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Fixes: https://github.com/nushell/nushell/issues/11677
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
```
'https://example.com' | url parse | update scheme ssh | upda
te username user | url join
# => ssh://user@example.com/
'https://example.com' | url parse | update scheme ssh | upda
te password hackme | url join
# => ssh://example.com/
'https://example.com' | url parse | update scheme ssh | update username user | update password hackme | url join
# => ssh://user:hackme@example.com/
```
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Richard Westhaver <ellis@rwest.io>
While working on #11288 I was having some trouble tracking the main REPL
loop, so I've sent in a bunch of tiny refactorings on this branch.
These are almost all of the "move code from one place to another"
variety, and each commit is meant to be independent, _except for the
last one_, which is trying to be a bit more clever to handle the
decision of autocd'ing vs running a command. Feel free to just go
through each commit and cherry pick the ones that look good.
This leads to `evaluate_repl` going from ending on line 715 to ending on
line 395. Again, this is mostly just moving code around, but I think
this set of changes will make other changes around juggling the stack to
avoid cloning easier to review.
# Description
This PR rolls back the polars updates to 0.37.0 back to 0.36.2 since it
won't compile yet for some reason.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes `update cells` parameter `--columns`/`-c` so that it takes
a `SyntaxShape::List` instead of `SyntaxShape::Table`.
closes#11689
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes the `ansi` command to be a `const` command.
- ~~It's breaking because I found that I had to change the way `ansi` is
used in scripts a little bit.
https://github.com/nushell/nu_scripts/pull/751~~
- I had to change one of the examples because apparently `const` can't
be tested yet.
- ~~I'm not sure this is right at all
https://github.com/nushell/nushell/pull/11682/files#diff-ba932369a40eb40d6e1985eac1c784af403dab4500a7f0568e593900bf6cd740R654-R655.
I just didn't want to duplicate a ton of code. Maybe if I duplicated the
code it wouldn't be a breaking change because it would have a run and
run_const?~~
- I had to add `opt_const` to CallExt.
/cc @kubouch Can you take a look at this? I'm a little iffy if I'm doing
this right, or even if we should do this at all.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR uses `str::lines` to simplify the `lines` command (and one other
section of code). This has two main benefits:
1. We no longer need to use regex to split on lines, as `str::lines`
splits on `\r\n` or `\n`.
2. We no longer need to handle blank empty lines at the end. E.g.,
`str::lines` results in `["text"]` for both `"test\n"` and `"text"`.
These changes give a slight boost to performance for the following
benchmarks:
1. lines of `Value::String`:
```nushell
let data = open Cargo.lock
1..10000 | each { $data | timeit { lines } } | math avg
```
current main: 392µs
this PR: 270µs
2. lines of external stream:
```nushell
1..10000 | each { open Cargo.lock | timeit { lines } } | math avg
```
current main: 794µs
this PR: 489µs
# Description
Fixes: #11394
When run `^sleep 3` we have an `exit_code ListStream`, and when we press
ctrl-c, this `ListStream` will return None. But it's not expected,
because `exit_code` sender in `run_external` always send an exit code
out.
This pr is trying to fix the issue by introducing a `first_guard` into
ListStream, it will always generate a value from underlying stream if
`first_guard` is true, so it's guarantee to have at least one value to
return.
And the pr also do a little refactor, which makes use of
`ListStream::from_stream` rather than construct it manually.
# User-Facing Changes
## Before
```
> nu -c "^sleep 3" # press ctrl-c
> echo $env.LAST_EXIT_CODE
0
```
## After
```
> nu -c "^sleep 3" # press ctrl-c
> echo $env.LAST_EXIT_CODE
255
```
# Tests + Formatting
None, sorry that I don't think it's easy to test the ctrlc behavior.
# After Submitting
None
# Description
Adds the `--strict` flag for `from json` which will try to parse text
while following the exact JSON specification (e.g., no comments or
trailing commas allowed). Fixes issue #11548.
this PR should close#9105
# Description
I have implemented highlights for find which work for all strings. The
implementation also works for lists, but with exceptions (for example,
it does not work for list of lists). The implementation is also not
implemented for --regex.
---------
Co-authored-by: Georgiana <geo@LAPTOP-EQP6H37N>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
This fixes an issue brought up by nihilander in
[Discord](https://discord.com/channels/601130461678272522/614593951969574961/1201594105986285649).
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Nushell panics when the spread operator is used like this (the
`...$rest` shouldn't actually be parsed as a spread operator at all):
```nu
$ def foo [...rest: string] {...$rest}
$ foo bar baz
thread 'main' panicked at /root/.cargo/registry/src/index.crates.io-6f17d22bba15001f/nu-protocol-0.89.0/src/signature.rs:650:9:
Internal error: can't run a predeclaration without a body
stack backtrace:
0: rust_begin_unwind
1: core::panicking::panic_fmt
2: <nu_protocol::signature::Predeclaration as nu_protocol::engine::command::Command>::run
3: nu_engine::eval::eval_call
4: nu_engine::eval::eval_expression_with_input
5: nu_engine::eval::eval_element_with_input
6: nu_engine::eval::eval_block
7: nu_cli::util::eval_source
8: nu_cli::repl::evaluate_repl
9: nu::run::run_repl
10: nu::main
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
```
The problem was that whenever the parser saw something like `{...$`,
`{...(`, or `{...[`, it would treat that as a record with a spread
expression, ignoring the syntax shape of the block it was parsing. This
should now be fixed, and the snippet above instead gives the following
error:
```nu
Error: nu:🐚:external_command
× External command failed
╭─[entry #1:1:1]
1 │ def foo [...rest] {...$rest}
· ────┬───
· ╰── executable was not found
╰────
help: No such file or directory (os error 2)
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Stuff like `do { ...$rest }` will now try to run a command `...$rest`
rather than complaining that variable `$rest` doesn't exist.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Sorry about the issue, I am not touching the parser again for a long
time :)
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
A bit hackish but this fixes the precedence of the `not` operator.
Before: `not false and false` => true
Now: `not false and false` => false
Fixes#11633
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
# Description
There are times where explicitly specifying a schema for a dataframe is
needed such as:
- Opening CSV and JSON lines files and needing provide more information
to polars to keep it from failing or in a desire to override default
type conversion
- When converting a nushell value to a dataframe and wanting to override
the default conversion behaviors.
This pull requests provides:
- A flag to allow specifying a schema when using dfr into-df
- A flag to allow specifying a schema when using dfr open that works for
CSV and JSON types
- A new command `dfr schema` which displays schema information and will
allow display support schema dtypes
Schema is specified creating a record that has the key value and the
dtype. Examples usages:
```
{a:1, b:{a:2}} | dfr into-df -s {a: u8, b: {a: i32}} | dfr schema
{a: 1, b: {a: [1 2 3]}, c: [a b c]} | dfr into-df -s {a: u8, b: {a: list<u64>}, c: list<str>} | dfr schema
dfr open -s {pid: i32, ppid: i32, name: str, status: str, cpu: f64, mem: i64, virtual: i64} /tmp/ps.jsonl | dfr schema
```
Supported dtypes:
null
bool
u8
u16
u32
u64
i8
i16
i32
i64
f32
f64
str
binary
date
datetime[time_unit: (ms, us, ns) timezone (optional)]
duration[time_unit: (ms, us, ns)]
time
object
unknown
list[dtype]
structs are also supported but are specified via another record:
{a: u8, b: {d: str}}
Another feature with the dfr schema command is that it returns the data
back in a format that can be passed to provide a valid schema that can
be passed in as schema argument:
<img width="638" alt="Screenshot 2024-01-29 at 10 23 58"
src="https://github.com/nushell/nushell/assets/56345/b49c3bff-5cda-4c86-975a-dfd91d991373">
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
This PR updates nushell to the latest reedline main to fix the quick
completions.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
the match-text style (https://github.com/nushell/reedline/pull/730) is
now configurable via the config.nu file.
the option ``correct_cursor_pos`` can now also be set in the config.nu
file.
# Description
This pr is a follow up to #11621, it introduces a `str escape-glob`
command as a workaround for the case:
```nushell
let f = "a[123]b"
ls $f
```
It will glob `a[123]b`, we can get rid of the behavior through `str
escape-glob` command:
```nushll
let f = "a[123]b"
ls ($f | str escape-glob)
```
It's more useful in the `each` context:
`ls | get name | str escape-glob | each {|it| ls $it}`
# User-Facing Changes
NaN
# Tests + Formatting
Done
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Bumps [ical](https://github.com/Peltoche/ical-rs) from 0.9.0 to 0.10.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/Peltoche/ical-rs/releases">ical's
releases</a>.</em></p>
<blockquote>
<h2>v0.10.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Fix newlines by <a
href="https://github.com/westy92"><code>@westy92</code></a> in <a
href="https://redirect.github.com/Peltoche/ical-rs/pull/56">Peltoche/ical-rs#56</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/Peltoche/ical-rs/compare/v0.9.0...v0.10.0">https://github.com/Peltoche/ical-rs/compare/v0.9.0...v0.10.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="2e83429867"><code>2e83429</code></a>
chore: Release ical version 0.10.0</li>
<li><a
href="6c265a53f0"><code>6c265a5</code></a>
Add test to verify parser handles \r\n.</li>
<li><a
href="79b0e6501b"><code>79b0e65</code></a>
Fixes & clippy.</li>
<li><a
href="821bd46bfb"><code>821bd46</code></a>
Fix split lines.</li>
<li><a
href="8bb242a4ba"><code>8bb242a</code></a>
Fix newlines.</li>
<li>See full diff in <a
href="https://github.com/Peltoche/ical-rs/compare/v0.9.0...v0.10.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* [Refactor Menu System with Composition of Menu
Functions](https://github.com/nushell/reedline/issues/706)
* Move Description Menu over to Reedline to consolidate location of the
Menus which will simplify further changes and maintenance to the Menu
system going forward
* Removes lots of code duplication in the Menu system on the Reedline
side which should ease a developers ability to develop new cool menus
for Reedline moving forward
# Description
Fix a breaking change which is introduced by #11621
`rm -f /tmp/aaa` shouldn't return error if `/tmp/aaa/` doesn't exist.
# User-Facing Changes
NaN
# Tests + Formatting
Done
- should fix https://github.com/nushell/nushell/issues/11648
# Description
this PR
- adds a test that should pass but fails
- adds `$.extra_usage` to the output of `scope modules`, fixing both the
new test and the linked issue
# User-Facing Changes
`$.extra_usage` is now a column in the output of `scope modules`
# Tests + Formatting
a new test case has been added to `correct_scope_modules_fields`
# After Submitting
# Description
@Yethal had a strange problem where a script would work with `each` but
not `par-each`. I found this to be because the `input_output_types` were
different. These io types are weird and I don't think they're correct
but at least they're the same now.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #11595
The original issue is caused by #11475, we also need to make empty list
matches `list type` or `table type`
cc @amtoine
# User-Facing Changes
Nan
# Tests + Formatting
Done
# Description
This pr is a follow up to
[#11569](https://github.com/nushell/nushell/pull/11569#issuecomment-1902279587)
> Revert the logic in https://github.com/nushell/nushell/pull/10694 and
apply the logic in this pr to mv, cp, rv will require a larger change, I
need to think how to achieve the bahavior
And sorry @bobhy for reverting some of your changes.
This pr is going to unify glob behavior on the given commands:
* open
* rm
* cp-old
* mv
* umv
* cp
* du
So they have the same behavior to `ls`, which is:
If given parameter is quoted by single quote(`'`) or double quote(`"`),
don't auto-expand the glob pattern. If not quoted, auto-expand the glob
pattern.
Fixes: #9558Fixes: #10211Fixes: #9310Fixes: #10364
# TODO
But there is one thing remains: if we give a variable to the command, it
will always auto-expand the glob pattern, e.g:
```nushell
let path = "a[123]b"
rm $path
```
I don't think it's expected. But I also think user might want to
auto-expand the glob pattern in variables.
So I'll introduce a new command called `glob escape`, then if user
doesn't want to auto-expand the glob pattern, he can just do this: `rm
($path | glob escape)`
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Done
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
## NOTE
This pr changes the semantic of `GlobPattern`, before this pr, it will
`expand path` after evaluated, this makes `nu_engine::glob_from` have no
chance to glob things right if a path contains glob pattern.
e.g: [#9310
](https://github.com/nushell/nushell/issues/9310#issuecomment-1886824030)
#10211
I think changing the semantic is fine, because it makes glob works if
path contains something like '*'.
It maybe a breaking change if a custom command's argument are annotated
by `: glob`.
wrap chrono in panic hooks to handle panic'ing unwraps on Jan 1, 1601
00:00 UTC and other reasons unknown. An overflow if time_u64 is smaller
than EPOCH_AS_FILETIME has been wrapped.
Further discussion
https://github.com/nushell/nushell/issues/10464
There are two issues that are associated with Chrono. I did not test. It
may not relate, but it could.
thread 'main' panicked at 'SystemTimeToFileTime failed with: The
parameter is incorrect.
https://github.com/nushell/nushell/issues/6574https://github.com/nushell/nushell/issues/9470
# Description
I'm not a fan of this code that was pulled from chrono. negative seconds
and nano seconds?
```rust
// Adapted from https://github.com/chronotope/chrono/blob/v0.4.19/src/datetime.rs#L755-L767.
let (sec, nsec, was_success) = match t.duration_since(UNIX_EPOCH) {
Ok(dur) => {
(dur.as_secs() as i64, dur.subsec_nanos(),true)
},
Err(e) => {
// unlikely but should be handled
let dur = e.duration();
let (sec, nsec) = (dur.as_secs() as i64, dur.subsec_nanos());
if nsec == 0 {
(-sec, 0,false)
} else {
(-sec - 1, 1_000_000_000 - nsec,false)
}
}
};
```
There's more on the #10464 ticket;
# User-Facing Changes
Use ls and it will not crash when listing windows pipes
ls \\.\pipe.
# Tests + Formatting
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
DONE
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
that command yields:
```rust
error: casting raw pointers to the same type and constness is unnecessary (`*mut u16` -> `*mut u16`)
--> crates\nu-system\src\windows.rs:972:13
|
972 | name.as_mut_ptr() as *mut u16,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `name.as_mut_ptr()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
= note: `-D clippy::unnecessary-cast` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::unnecessary_cast)]`
error: casting raw pointers to the same type and constness is unnecessary (`*mut u16` -> `*mut u16`)
--> crates\nu-system\src\windows.rs:974:13
|
974 | domainname.as_mut_ptr() as *mut u16,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `domainname.as_mut_ptr()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
error: could not compile `nu-system` (lib) due to 2 previous errors
```
TBD
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# Description
This PR cleans up https://github.com/nushell/nushell/pull/11331. One
line was missed that caused the CI to break.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
follow-up to
- https://github.com/nushell/nushell/pull/11151
> **Important**
> land only between 0.89 and 0.90
# Description
this PR hides the `std testing` module from the outside.
- moves `nu-std/std/testing.nu` to `nu-std/testing.nu`
- removes the module from the standard library list of modules to parse
- fixes `toolkit.nu` and the CI
# User-Facing Changes
`std testing` won't be part of the standard library anymore.
# Tests + Formatting
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
environment variables were not correctly passed to `buffer_editor`.
Previously the conversion (if you can call it that) is incorrectly done
by `.as_string()`, which works for the most part, but ignores important
things like `PATH`, which are not strings in value form by default
(this issue was introduced in #10269, merged in #10535)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is a follow up to: #11365
After this pr, `--flag: bool` is no longer allowed.
I think `ParseWarning::Deprecated` is useful when we want to deprecated
something at syntax level, so I just leave it there for now.
# User-Facing Changes
## Before
```
❯ def foo [--b: bool] {}
Error: × Deprecated: --flag: bool
╭─[entry #15:1:1]
1 │ def foo [--b: bool] {}
· ──┬─
· ╰── `--flag: bool` is deprecated and will be removed in 0.90. Please use `--flag` instead, more info: https://www.nushell.sh/book/custom_commands.html
╰────
```
## After
```
❯ def foo [--b: bool] {}
Error: × Type annotations are not allowed for boolean switches.
╭─[entry #2:1:1]
1 │ def foo [--b: bool] {}
· ──┬─
· ╰── Remove the `: bool` type annotation.
╰────
```
# Tests + Formatting
Done
# Description
The `cell-path` is a type that can be created statically with
`$.nested.structure.5`, but can't be created from user input. This makes
it difficult to take advantage of commands that accept a cell-path to
operate on data structures.
This PR adds `into cell-path` for dynamic cell-path creation.
`into cell-path` accepts the following input shapes:
* Bare integer (equivalent to `$.1`)
* List of strings and integers
* List of records with entries `value` and `optional`
* String (parsed into a cell-path)
## Example usage
An example of where `into cell-path` can be used is in working with `git
config --list`. The git configuration has a tree structure that maps
well to nushell records. With dynamic cell paths it is easy to convert
`git config list` to a record:
```nushell
git config --list
| lines
| parse -r '^(?<key>[^=]+)=(?<value>.*)'
| reduce --fold {} {|entry, result|
let path = $entry.key | into cell-path
$result
| upsert $path {||
$entry.value
}
}
| select remote
```
Output:
```
╭────────┬──────────────────────────────────────────────────────────────────╮
│ │ ╭──────────┬───────────────────────────────────────────────────╮ │
│ remote │ │ │ ╭───────┬───────────────────────────────────────╮ │ │
│ │ │ upstream │ │ url │ git@github.com:nushell/nushell.git │ │ │
│ │ │ │ │ fetch │ +refs/heads/*:refs/remotes/upstream/* │ │ │
│ │ │ │ ╰───────┴───────────────────────────────────────╯ │ │
│ │ │ │ ╭───────┬─────────────────────────────────────╮ │ │
│ │ │ origin │ │ url │ git@github.com:drbrain/nushell │ │ │
│ │ │ │ │ fetch │ +refs/heads/*:refs/remotes/origin/* │ │ │
│ │ │ │ ╰───────┴─────────────────────────────────────╯ │ │
│ │ ╰──────────┴───────────────────────────────────────────────────╯ │
╰────────┴──────────────────────────────────────────────────────────────────╯
```
## Errors
`lex()` + `parse_cell_path()` are forgiving about what is allowed in a
cell-path so it will allow what appears to be nonsense to become a
cell-path:
```nushell
let table = [["!@$%^&*" value]; [key value]]
$table | get ("!@$%^&*.0" | into cell-path)
# => key
```
But it will reject bad cell-paths:
```
❯ "a b" | into cell-path
Error: nu:🐚:cant_convert
× Can't convert to cell-path.
╭─[entry #14:1:1]
1 │ "a b" | into cell-path
· ───────┬──────
· ╰── can't convert string to cell-path
╰────
help: "a b" is not a valid cell-path (Parse mismatch during operation.)
```
# User-Facing Changes
New conversion command `into cell-path`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Automatic documentation updates
I've noticed that two tests fail on my system when running `toolkit
check pr`. The reason for this is that my locale is set to German. `ls`
is translated, so checking the error message will only work on systems
set to English.
I've adapted the test to check the exit code instead.
Alternatively, we could set the locale, I am not sure if the `nu!` macro
supports that though.
# Description
* release notes
https://github.com/pola-rs/polars/releases/tag/rs-0.36.2
* dependencies
remove `sysinfo` 0.29.11
add `polars-compute` 0.36.2
# User-Facing Changes
[Change value_counts resulting column name from counts to
count](https://github.com/pola-rs/polars/pull/12506)
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
When resolving external commands, the current `PATH` was not taken into
account.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The `cp-old` command has been deprecated for a few releases now. It
should be safe to remove it once and for all. Let's see.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Bumps [shlex](https://github.com/comex/rust-shlex) from 1.2.0 to 1.3.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/comex/rust-shlex/blob/master/CHANGELOG.md">shlex's
changelog</a>.</em></p>
<blockquote>
<h1>1.3.0</h1>
<ul>
<li>Full fix for the high-severity security vulnerability <a
href="https://rustsec.org/advisories/RUSTSEC-2024-0006.html">RUSTSEC-2024-0006</a>
a.k.a. <a
href="https://github.com/comex/rust-shlex/security/advisories/GHSA-r7qv-8r2h-pg27">GHSA-r7qv-8r2h-pg27</a>:
<ul>
<li>Deprecates quote APIs in favor of <code>try_</code> equivalents that
complain about nul bytes.</li>
<li>Also adds a builder API, which allows re-enabling nul bytes without
using the deprecated interface, and in the future can allow other things
(as discussed in quoting_warning).</li>
<li>Adds documentation about various security risks that remain,
particularly with interactive shells.</li>
</ul>
</li>
<li>Adds explicit MSRV of 1.46.0.</li>
</ul>
<h1>1.2.1</h1>
<ul>
<li>Partial fix for the high-severity security vulnerability <a
href="https://rustsec.org/advisories/RUSTSEC-2024-0006.html">RUSTSEC-2024-0006</a>
a.k.a. <a
href="https://github.com/comex/rust-shlex/security/advisories/GHSA-r7qv-8r2h-pg27">GHSA-r7qv-8r2h-pg27</a>
without bumping MSRV:
<ul>
<li>The bytes <code>{</code> and <code>\xa0</code> are now escaped by
quoting functions.</li>
</ul>
</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/comex/rust-shlex/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/nushell/nushell/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
#11492 fixed flags for builtin commands but I missed that plugins don't
use the same `has_flag` that builtins do. This PR addresses this.
Unfortunately this means that return value of `has_flag` needs to change
from `bool` to `Result<bool, ShellError>` to produce an error when
explicit value is not a boolean (just like in case of `has_flag` for
builtin commands. It is not possible to check this in
`EvaluatedCall::try_from_call` because
# User-Facing Changes
Passing explicit values to flags of plugin commands (like `--flag=true`
`--flag=false`) should work now.
BREAKING: changed return value of `EvaluatedCall::has_flag` method from
`bool` to `Result<bool, ShellError>`
# Tests + Formatting
Added tests and updated documentation and examples
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
For fixing #11599
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Turns out I didn't properly test the description menu in #11488,
apologies for that. It turns out that `NuHelpCompleter`, which provides
completions for the description/help menu, was treating the position it
was given as the start of the line rather than the start. Flipping that
appears to fix the issue.
I missed not only `NuHelpCompleter` but also `NuMenuCompleter` in my
previous PR. If the menu's source is a closure and it doesn't return a
record with the start and end, then `pos` is again treated as the start,
so I've changed that too. External completers shouldn't need changing.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- [X] Test description menu
- [X] Test menu sources that return records that don't have `start` and
`end`
- [ ] <s>Test external completers if any changes have to be made
there</s> No changes needed, it looks like
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Closes#11561
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR will allow string interpolation at parse time.
Since the actual config hasn't been loaded at parse time, this uses the
`get_config()` method on `StateWorkingSet`. So file sizes and datetimes
(I think those are the only things whose string representations depend
on the config) may be formatted differently from how users have
configured things, which may come as a surprise to some. It does seem
unlikely that anyone would be formatting file sizes or date times at
parse time. Still, something to think about if/before this PR merged.
Also, I changed the `ModuleNotFound` error to include the name of the
module.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users will be able to do stuff like:
```nu
const x = [1 2 3]
const y = $"foo($x)" // foo[1, 2, 3]
```
The main use case is `use`-ing and `source`-ing files at parse time:
```nu
const file = "foo.nu"
use $"($file)"
```
If the module isn't found, you'll see an error like this:
```
Error: nu::parser::module_not_found
× Module not found.
╭─[entry #3:1:1]
1 │ use $"($file)"
· ─────┬────
· ╰── module foo.nu not found
╰────
help: module files and their paths must be available before your script is run as parsing occurs before anything is evaluated
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Although there's user-facing changes, there's probably no need to change
the docs since people probably already expect string interpolation to
work at parse time.
Edit: @kubouch pointed out that we'd need to document the fact that
stuff like file sizes and datetimes won't get formatted according to
user's runtime configs, so I'll make a PR to nushell.github.io after
this one
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR is for using version 5.1 of
[byte_unit](https://docs.rs/byte-unit/latest/byte_unit/index.html)
instead of 4.0. dependabot opened
https://github.com/nushell/nushell/pull/11499 to do this but it's a
major version increment so some minor changes were necessary.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
If something is on the boundary of a unit (e.g. 1024 bytes = 1
kibibytes), that will now be formatted as `1.0 KiB` where it used to be
formatted as `1,024 B`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #11455
### For arguments which is annotated with `:path/:directory/:glob`
To fix the issue, we need to have a way to know if a path is originally
quoted during runtime. So the information needed to be added at several
levels:
* parse time (from user input to expression)
We need to add quoted information into `Expr::Filepath`,
`Expr::Directory`, `Expr::GlobPattern`
* eval time
When convert from `Expr::Filepath`, `Expr::Directory`,
`Expr::GlobPattern` to `Value::String` during runtime, we won't auto
expanded the path if it's quoted
### For `ls`
It's really special, because it accepts a `String` as a pattern, and it
generates `glob` expression inside the command itself.
So the idea behind the change is introducing a special SyntaxShape to
ls: `SyntaxShape::LsGlobPattern`. So we can track if the pattern is
originally quoted easier, and we don't auto expand the path either.
Then when constructing a glob pattern inside ls, we check if input
pattern is quoted, if so: we escape the input pattern, so we can run `ls
a[123]b`, because it's already escaped.
Finally, to accomplish the checking process, we also need to introduce a
new value type called `Value::QuotedString` to differ from
`Value::String`, it's used to generate an enum called `NuPath`, which is
finally used in `ls` function. `ls` learned from `NuPath` to know if
user input is quoted.
# User-Facing Changes
Actually it contains several changes
### For arguments which is annotated with `:path/:directory/:glob`
#### Before
```nushell
> def foo [p: path] { echo $p }; print (foo "~/a"); print (foo '~/a')
/home/windsoilder/a
/home/windsoilder/a
> def foo [p: directory] { echo $p }; print (foo "~/a"); print (foo '~/a')
/home/windsoilder/a
/home/windsoilder/a
> def foo [p: glob] { echo $p }; print (foo "~/a"); print (foo '~/a')
/home/windsoilder/a
/home/windsoilder/a
```
#### After
```nushell
> def foo [p: path] { echo $p }; print (foo "~/a"); print (foo '~/a')
~/a
~/a
> def foo [p: directory] { echo $p }; print (foo "~/a"); print (foo '~/a')
~/a
~/a
> def foo [p: glob] { echo $p }; print (foo "~/a"); print (foo '~/a')
~/a
~/a
```
### For ls command
`touch '[uwu]'`
#### Before
```
❯ ls -D "[uwu]"
Error: × No matches found for [uwu]
╭─[entry #6:1:1]
1 │ ls -D "[uwu]"
· ───┬───
· ╰── Pattern, file or folder not found
╰────
help: no matches found
```
#### After
```
❯ ls -D "[uwu]"
╭───┬───────┬──────┬──────┬──────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼──────────┤
│ 0 │ [uwu] │ file │ 0 B │ now │
╰───┴───────┴──────┴──────┴──────────╯
```
# Tests + Formatting
Done
# After Submitting
NaN
# Description
I ran into a problem where one of our benchmark tests in nu_scripts
wouldn't work because math avg wouldn't work with durations, so I made
these changes to support it. I'm confident that there are other math
commands that probably need this "fix".
Side note - we should really fix our inout_output_type system.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds an IDE-Style completion menu
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR should close#1171
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR introduces the capability to select text using the existing
move.. `EditCommand`s of `reedline`. Those commands are extended with an
optional parameter specifying if text should be selected while
navigating. This enables a workflow familiar from a wide variety of text
editors, where holding `shift` while navigating selects all text between
the initial cursor position when pressing `shift` and the current cursor
position.
Before this PR can be merged the [sibling PR for
reedline](https://github.com/nushell/reedline/pull/689) has to land
first.
# User-Facing Changes
## Additional `EditCommand`s
1. `SelectAll`
2. `CutSelection`
3. `CopySelection`
## New optional parameter on existing `EditCommand`s
All `EditCommand`s of `EditType` `MoveCursor` have a new optional
parameter named `select` of type `bool`. If this parameter is not set by
a user it is treated as false, which corresponds to their behavior up to
now.
I am relatively new to `nushell` and as such may not know of existing
behavior that might change through this PR. However, I believe there
should be none. I come to this conclusion because
1. Existing commands are extended only with an *optional* additional
parameter, users who currently use these EditCommands keep their
existing behavior if they don't use it.
2. A few new commands are introduced which were previously not valid.
3. The default keybindings specified in `default_config.nu` are
untouched.
# Tests + Formatting
Tests for the new optional parameter for the move commands are included
to make sure that they truly are optional and an unused optional
parameter conforms to the previous behavior.
Bumps [h2](https://github.com/hyperium/h2) from 0.3.22 to 0.3.24.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/hyperium/h2/releases">h2's
releases</a>.</em></p>
<blockquote>
<h2>v0.3.24</h2>
<h2>Fixed</h2>
<ul>
<li>Limit error resets for misbehaving connections.</li>
</ul>
<h2>v0.3.23</h2>
<h2>What's Changed</h2>
<ul>
<li>cherry-pick fix: streams awaiting capacity lockout in <a
href="https://redirect.github.com/hyperium/h2/pull/734">hyperium/h2#734</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/hyperium/h2/blob/v0.3.24/CHANGELOG.md">h2's
changelog</a>.</em></p>
<blockquote>
<h1>0.3.24 (January 17, 2024)</h1>
<ul>
<li>Limit error resets for misbehaving connections.</li>
</ul>
<h1>0.3.23 (January 10, 2024)</h1>
<ul>
<li>Backport fix from 0.4.1 for stream capacity assignment.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="7243ab5854"><code>7243ab5</code></a>
Prepare v0.3.24</li>
<li><a
href="d919cd6fd8"><code>d919cd6</code></a>
streams: limit error resets for misbehaving connections</li>
<li><a
href="a7eb14a487"><code>a7eb14a</code></a>
v0.3.23</li>
<li><a
href="b668c7fbe2"><code>b668c7f</code></a>
fix: streams awaiting capacity lockout (<a
href="https://redirect.github.com/hyperium/h2/issues/730">#730</a>) (<a
href="https://redirect.github.com/hyperium/h2/issues/734">#734</a>)</li>
<li>See full diff in <a
href="https://github.com/hyperium/h2/compare/v0.3.22...v0.3.24">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/nushell/nushell/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR updates a few outdated dependencies.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
If there were brackets in a string argument of a script it was always
interpreted as interpolation before the change. That lead to unexpected
outputs of such scripts. After this change arguments which are not
intended as interpolation (not starting with $) and containing brackets
will have implicitly added backticks for correct interpretation in the
scripts. This fixes#10908.
To fix other issues mentioned in #11035 I changed the deparsing logic.
Initially we added backticks for multi word variables and double quote
if there was \ or " in the string. My change would add double quotes any
time string starts with $ or contains any of character that might break
parsing. The characters I identified are white space, (, ', `, ",and \.
It's possible other characters should be added to this list.
I tested this solution with few simple scripts using both stand alone
arguments and flags and it seems to work but I would appreciate if
someone with more experience checked it with some more unusual cases I
missed.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Erroneous behaviour described in the issue will no longer happen.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added tests for new formatting.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
`htmlescape` is unmaintained: https://crates.io/crates/htmlescape
while `v_htmlescape` is: https://crates.io/crates/v_htmlescape
and is used by two popular crates (`actix-files` and `minijinja`)
Let's use this instead - I'm packaging `nu` in Fedora and there is
understandable reluctance in bringing in an unmaintained crate if we can
avoid it.
# User-Facing Changes
Should not be any; drop-in replacement
# Tests + Formatting
Tested using:
- `cargo build` in the root folder (needed by some `nu-command` tests)
- `cargo test --features sqlite` in `crates/nu-command`
(`tests/commands/database/into_sqlite.rs` needs `rusqlite`)
- `cargo test` in `crates/nu-cmd-extra`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
Signed-off-by: Michel Lind <salimma@fedoraproject.org>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Hi,
This closes#10446 , wherein we start implementing `mv` from `uutils`.
There are some stuff to iron out, particularly
* Decide on behavior from ignored tests
* Wait for release/PRs to be approved on `uutils` side, but still can be
tested for now. See [PR
approved](https://github.com/uutils/coreutils/pull/5428), and
[pending](https://github.com/uutils/coreutils/pull/5429).
* `--progress` does not seem to work on `uutils mv` either and have not
checked whether certain `X` size has to be achieved in order for it to
appear, thus something to investigate as well, but thought it wasnt
important enough to not make the PR.
See [issue
comment](https://github.com/nushell/nushell/issues/10446#issuecomment-1764497988),
on the possible strategy to follow, mainly copy what we did with `ucp`.
I still left some comments on purpose particularly on tests, which of
course would be removed before something is decided here. :) @fdncred
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [X] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
<!--
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Implement support for lazy records for `items`, the same way `columns`
or `values` do.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Something like `sys | items {|k,v| $"($k): ($v)"}` used to fail with an
error. Now it works as expected.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Adds a CLI flag for nushell that disables reading and writing to the
history file. This will be useful for future testing and possibly our
users as well. To borrow `fish` shell's terminology, this allows users
to start nushell in "private" mode.
# User-Facing Changes
Breaking API change for `nu-protocol` (changed `Config`).
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Updated the attribute as per the latest version of
[tarpaulin](https://github.com/xd009642/tarpaulin) to fix compilation
error when used as library with latest tarpaulin.
https://github.com/xd009642/tarpaulin/tree/develop?tab=readme-ov-file#ignoring-code-in-files
# User-Facing Changes
None
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The math functions `avg`, `max`, `median`, `min`, `product`, `stddev`,
`sum` and `variance` all takes a list as input and return a number.
<https://github.com/nushell/nushell/blob/main/crates/nu-command/src/math/utils.rs>
contains code that makes these functions work for tables (by running the
function on each column), but this functionality has not been accessible
because the input types are too strict. This PR remedies this.
The functions should also work on records, since a record is basically a
one-row table.
Most of these functions also make sense for durations and file sizes,
except `product` of course. There's an implementation issue with
`stddev` and `variance` for durations and file sizes, but they could in
principle support it.
# User-Facing Changes
This PR only adds supported types, and doesn't remove any, so there
should be no breaking changes.
# Description
Currently, the `into sqlite` command collects the entire input stream
into a single Value, which soaks up the entire input into memory, before
it ever tries to write anything to the DB. This is very problematic for
large inputs; for example, I tried transforming a multi-gigabyte CSV
file into SQLite, and before I knew what was happening, my system's
memory was completely exhausted, and I had to hard reboot to recover.
This PR fixes this problem by working directly with the pipeline stream,
inserting into the DB as values are read from the stream.
In order to facilitate working with the stream directly, I introduced a
new `Table` struct to store the connection and a few configuration
parameters, as well as to make it easier to lazily create the table on
the first read value.
In addition to the purely functional fixes, a few other changes were
made to the serialization and user facing behavior.
### Serialization
Much of the preexisting code was focused on generating the exact text
needed for a SQL statement. This is unneeded and less safe than using
the `rusqlite` crate's serialization for native Rust types along with
prepared statements.
### User-Facing Changes
Currently, the command is very liberal in the input types it accepts.
The strategy is basically if it is a record, try to follow its structure
and make an analogous SQL row, which is pretty reasonable. However, when
it's not a record, it basically tries to guess what the user wanted and
just makes a single column table and serializes the value into that one
column, whatever type it may be.
This has been changed so that it only accepts records as input. If the
user wants to serialize non-record types into SQL, then they must
explicitly opt into doing this by constructing a record or table with it
first. For a utility for inserting data into SQL, I think it makes more
sense to let the user choose how to convert their data, rather than make
a choice for them that may surprise them.
However, I understand this may be a controversial change. If the
maintainers don't agree, I can change this back.
#### Long switch names
The `file_name` and `table_name` long form switches are currently
snake_case and expect to be as such at the command line. These have been
changed to kebab-case to be more conventional.
# Tests + Formatting
To test the memory consumption, I used [this publicly available index of
all Wikipedia articles](https://dumps.wikimedia.org/enwiki/20230820/),
using the first 10,000, 100,000, and 1,000,000 entries, in that order. I
ran the following script to benchmark the changes against the current
stable release:
```nu
#!/usr/bin/nu
# let shellbin = $"($env.HOME)/src/nushell/target/aarch64-linux-android/release/nu"
let shellbin = "nu"
const dbpath = 'enwiki-index.db'
[10000, 100000, 1000000]
| each {|rows|
rm -f $dbpath;
do { time -f '%M %e %U %S' $shellbin -c (
$"bzip2 -cdk ~/enwiki-20230820-pages-articles-multistream-index.txt.bz2
| head -n ($rows)
| lines
| parse '{offset}:{id}:{title}'
| update cells -c [offset, id] { into int }
| into sqlite ($dbpath)"
)
}
| complete
| get stderr
| str trim
| parse '{rss_max} {real} {user} {kernel}'
| update cells -c [rss_max] { $"($in)kb" | into filesize }
| update cells -c [real, user, kernel] { $"($in)sec" | into duration }
| insert rows $rows
| roll right
}
| flatten
| to nuon
```
This yields the following results
Current stable release:
|rows|rss_max|real|user|kernel|
|-|-|-|-|-|
|10000|53.6 MiB|770ms|460ms|420ms|
|100000|209.6 MiB|6sec 940ms|3sec 740ms|4sec 380ms|
|1000000|1.7 GiB|1min 8sec 810ms|38sec 690ms|42sec 550ms|
This PR:
|rows|rss_max|real|user|kernel|
|-|-|-|-|-|
|10000|38.2 MiB|780ms|440ms|410ms|
|100000|39.8 MiB|6sec 450ms|3sec 530ms|4sec 160ms|
|1000000|39.8 MiB|1min 3sec 230ms|37sec 440ms|40sec 180ms|
# Note
I started this branch kind of at the same time as my others, but I
understand the feedback that smaller PRs are preferred. Let me know if
it would be better to split this up.
I do think the scope of the changes are on the bigger side even without
the behavior changes I mentioned, so I'm not sure if that will help this
particular PR very much, but I'm happy to oblige on request.
# Description / User-Facing Changes
Signals are no longer blocked for child processes launched from both
interactive and non-interactive mode. The only exception is that
`SIGTSTP`, `SIGTTIN`, and `SIGTTOU` remain blocked for child processes
launched only from **interactive** mode. This is to help prevent nushell
from getting into an unrecoverable state, since we don't support
background jobs. Anyways, this fully fixes#9026.
# Other Notes
- Needs Rust version `>= 1.66` for a fix in
`std::process::Command::spawn`, but it looks our current Rust version is
way above this.
- Uses `sigaction` instead of `signal`, since the behavior of `signal`
can apparently differ across systems. Also, the `sigaction` man page
says:
> The sigaction() function supersedes the signal() function, and should
be used in preference.
Additionally, using both `sigaction` and `signal` is not recommended.
Since we were already using `sigaction` in some places (and possibly
some of our dependencies as well), this PR replaces all usages of
`signal`.
# Tests
Might want to wait for #11178 for testing.
# Description
When nushell calls a plugin it now sends a configuration `Value` from
the nushell config under `$env.config.plugins.PLUGIN_SHORT_NAME`. This
allows plugin authors to read configuration provided by plugin users.
The `PLUGIN_SHORT_NAME` must match the registered filename after
`nu_plugin_`. If you register `target/debug/nu_plugin_config` the
`PLUGIN_NAME` will be `config` and the nushell config will loook like:
$env.config = {
# ...
plugins: {
config: [
some
values
]
}
}
Configuration may also use a closure which allows passing values from
`$env` to a plugin:
$env.config = {
# ...
plugins: {
config: {||
$env.some_value
}
}
}
This is a breaking change for the plugin API as the `Plugin::run()`
function now accepts a new configuration argument which is an
`&Option<Value>`. If no configuration was supplied the value is `None`.
Plugins compiled after this change should work with older nushell, and
will behave as if the configuration was not set.
Initially discussed in #10867
# User-Facing Changes
* Plugins can read configuration data stored in `$env.config.plugins`
* The plugin `CallInfo` now includes a `config` entry, existing plugins
will require updates
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Update [Creating a plugin (in
Rust)](https://www.nushell.sh/contributor-book/plugins.html#creating-a-plugin-in-rust)
[source](https://github.com/nushell/nushell.github.io/blob/main/contributor-book/plugins.md)
- [ ] Add "Configuration" section to [Plugins
documentation](https://www.nushell.sh/contributor-book/plugins.html)
# Description
1. Make table to be a subtype of `list<any>`, so some input_output_types
of filter commands are unnecessary
2. Change some commands which accept an input type, but generates
different output types. In this case, delete duplicate entry, and change
relative output type to `<any>`
Yeah it makes some commands more permissive, but I think it's better to
run into strange issue that why my script runs to failed during parse
time.
Fixes #11193
# User-Facing Changes
NaN
# Tests + Formatting
NaN
# After Submitting
NaN
Bumps [rust-embed](https://github.com/pyros2097/rust-embed) from 8.1.0
to 8.2.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pyrossh/rust-embed/blob/master/changelog.md">rust-embed's
changelog</a>.</em></p>
<blockquote>
<h2>[8.2.0] - 2023-12-29</h2>
<ul>
<li>Fix naming collisions in macros <a
href="https://redirect.github.com/pyrossh/rust-embed/pull/230/files">#230</a>.
Thanks to <a href="https://github.com/hwittenborn">hwittenborn</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/pyros2097/rust-embed/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.17.0 to
1.17.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.17.1</h2>
<h2>[1.17.1] - 2024-01-12</h2>
<h3>Features</h3>
<ul>
<li>First attempt at aarch64 for Mac</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.17.1] - 2024-01-12</h2>
<h3>Features</h3>
<ul>
<li>First attempt at aarch64 for Mac</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="a35b382b44"><code>a35b382</code></a>
chore: Release</li>
<li><a
href="4c32fc5ec4"><code>4c32fc5</code></a>
docs: Update changelog</li>
<li><a
href="b02f5895d3"><code>b02f589</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/908">#908</a>
from epage/ci</li>
<li><a
href="7b12730b18"><code>7b12730</code></a>
chore(ci): Build for aarch64</li>
<li><a
href="5adfdc2ade"><code>5adfdc2</code></a>
chore(ci): Show what gets bundled</li>
<li><a
href="657d1b1764"><code>657d1b1</code></a>
chore(ci): Remove use of undefined variable</li>
<li><a
href="a7762787d8"><code>a776278</code></a>
chore(ci): Ensure rustfmt is available</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.17.0...v1.17.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR addresses #11525 by adding `--partial-escape` which makes `to
xml` only escape `<>&` in text and `<>&"` in comments. This PR also
fixes issue where comment and PI content was escaped even though [it
should not be](https://stackoverflow.com/a/46637835)
# User-Facing Changes
Correct comments and PIs
`to xml --partial-escape` flag to emit less escaped characters
# Tests + Formatting
Added tests for specified issues
# Description
Currently `path exists` checks the file/folder's existence by traversing
symlinks. I've added a `-n` switch/flag that disables symlink
traversing, similar to what `path expand -n` does.
## The Long Story (for those interested)
Hello! 👋 While working on one of my scripts, I discovered that the `path
exists` command was traversing symlinks. This meant that even if the
file existed, it would fail if the pointed location didn't exist. To
address this, I've introduced a new `-n` flag, which I borrowed from the
`path expand` command. This addition should make the behavior more
consistent within the *path commands universe*.
## But, is it any useful?
```nushell
let compat = /run/media/userX/DriveX/steam/steamapps/compatdata
if "symlink" == ($compat | path expand -n | path type) {}
# to this
if ($compat | path exists -n) {}
```
# User-Facing Changes
Users, will not efect. Unless they use the mentioned `-n` flag/switch.
Closes#10260
I'm not 100% convinced about the star thing for running commands because
on short commands it makes the title jitter.
Signed-off-by: Alex Saveau <saveau.alexandre@gmail.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
In `commandline --cursor-end`, set `repl.cursor_pos` to the number of
bytes in the buffer, not the number of graphemes.
fixes: #11503
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is a small change that updates the `--as-table`/`-t` parameter to
`SyntaxShape::List` instead of `SyntaxShape::Table`. It was always
supposed to be a list of headers. Not sure where Table came from.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds possibility to preserve/strip attributes from files when
using `cp` (via uu_cp::Attributes). To achieve this a single `--preserve
<list of attributes>` flag is added. This is different from how
coreutils and uutils cp function, but I believe this is better for
nushell.
Coreutils cp has three options `-p`, `--preserve` and `--no-presevce`.
The logic of these two options is not straightforward. As far as I
understand it is:
1. By default only mode attributes are preserved
2. `--preserve` option adds to default preserved attributes specified
ones (e.g. `--preserve=xattr,timestamps` will preserve mode, timestamps
and xattr)
3. `-p` is the same as `--preserve=mode,ownership,timestamps`
4. `--no-preserve` option rejects specified attributes (having priority
over `--preserve`)
However (in my opinion) the `--no-preserve` option is not needed,
because its only use seems to be rejecting attributes preserved by
default. But there is no need for this in nushell, because `--preserve`
can be specified with empty list as argument (whereas coreutils cp will
display a `cp: ambiguous argument ‘’ for ‘--preserve’` error if
`--preserve` is used with empty string as argument).
So to simplify this command is suggest (and implemented) only the
`--preserve` with the following logic:
1. By default mode attribute is preserved (as in coreutils cp)
2. `--preserve [ ... ]` will overwrite default with whatever is
specified in list (empty list meaning preserve nothing)
This way cp without `--preserve` behaves the same as coreutils `cp`, but
instead of using combinations of `--preserve` and `--no-preserve` one
needs to use `--preserve [ ... ]` with all attributes specified
explicitly. This seems more user-friendly to me as it does not require
remembering what the attributes preserved by default are and rejecting
them manually. However I see the possible problem with behavior
different from coreutils implementation, so some feedback is
apprecieated!
# User-Facing Changes
Users can now preserve or reject file attributes when using `cp`
# Tests + Formatting
Added tests manipulating mode and timestamps attributes.
# Description
Fixes: #11438
Take the following as example:
```nushell
def spam [foo: string] {
$'foo: ($foo | describe)'
}
def outer [--foo: string] {
spam $foo
}
outer
```
When we call `outer`, type checker only check the all for `outer`, but
doesn't check inside the body of `outer`. This pr is trying to introduce
a type checking process through `Type::is_subtype()` during eval time.
## NOTE
I'm not really sure if it's easy to make a check inside the body of
`outer`. Adding an eval time type checker seems like an easier solution.
As a result: `outer` will be caught by runtime, not parse time type
checker
cc @kubouch
# User-Facing Changes
After this pr the following call will failed:
```nushell
> outer
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #27:1:1]
1 │ def outer [--foo: any] {
2 │ spam $foo
· ──┬─
· ╰── can't convert nothing to string
3 │ }
╰────
```
# Tests + Formatting
Done
# After Submitting
NaN
# Description
This PR updates nushell to the latest reedline main branch after a
reedline PR was reverted.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The code that converts Nushell's span into LSP line and character
indices accidentally treated the span as character indices while they
are byte indices. Fixes#11522.
# User-Facing Changes
None, just a bugfix.
# Description
Bump to latest reedline main in order to dogfood latest reedline
changes.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Simply, `""` doesn't exist.
It's easy to test the truthfulness of this:
```rust
fn main() {
println!("{}", std::path::Path::new("").exists());
}
```
gives `false`
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Technically this is a breaking change, so:
- **breaking:** `path exists` no longer considers an empty path (`""`)
as exists
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
- [x] reedline
- [x] released
- [x] pinned
- [ ] git dependency check
- [ ] release notes
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
See full release notes:
[nushell/reedline@v0.28.0
(release)](https://github.com/nushell/reedline/releases/tag/v0.28.0)
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
When evaluating a closure (in
`EvalRuntime::eval_row_condition_or_closure()`), we try to resolve the
closure's block's captures, but we only check if they're variables on
the stack. We need to also check if they are constants (see the logic in
`Stack::gather_captures()`).
fixes#10701
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes#11264
This PR adds checks in `to xml` to output error for malformed xml
entries:
* With columns that are not one of `tag`, `attributes` or `content`
* With no `tag` when entry is not a string
* With `tag` that is not a string
This PR also replaces `attrs` with `attributes` in example and
extra_usage of `to xml` (column was originally named attrs and renamed
to attributes, but this was missed in docs)
# User-Facing Changes
`to xml` will produce error for conditions described above instead of
silently returning nothing
# Tests + Formatting
Added tests for `to xml` to check handling of malformed xml entries
# Description
Cross build for target `x86_64-pc-windows-gnu` fails on linux.
```console
nushell on main [?] is 📦 v0.88.2 via 🦀 v1.77.0-nightly
❯ cargo build --target x86_64-pc-windows-gnu -p nu-system
Compiling nu-system v0.88.2 (/data/source/nushell/crates/nu-system)
error[E0432]: unresolved import `chrono::Local`
--> crates/nu-system/src/windows.rs:5:14
|
5 | use chrono::{Local, NaiveDate};
| ^^^^^ no `Local` in the root
|
note: found an item that was configured out
--> /path/to/home/.cargo/registry/src/rsproxy.cn-0dccff568467c15b/chrono-0.4.31/src/lib.rs:537:17
|
537 | pub use offset::Local;
| ^^^^^
= note: the item is gated behind the `clock` feature
error[E0412]: cannot find type `Local` in crate `chrono`
--> crates/nu-system/src/windows.rs:68:46
|
68 | pub start_time: chrono::DateTime<chrono::Local>,
| ^^^^^ not found in `chrono`
|
note: found an item that was configured out
--> /path/to/home/.cargo/registry/src/rsproxy.cn-0dccff568467c15b/chrono-0.4.31/src/lib.rs:537:17
|
537 | pub use offset::Local;
| ^^^^^
= note: the item is gated behind the `clock` feature
Some errors have detailed explanations: E0412, E0432.
For more information about an error, try `rustc --explain E0412`.
error: could not compile `nu-system` (lib) due to 2 previous errors
```
- related PR: #11478
# Description
Now we can use `nu --testbin cococo` instead of `^echo` to echo messages
to stdout in tests.
But `nu` treats parameters as its own flags when parameter starts with
`-`. So `^echo --foo='bar'` still use `^echo`.
# User-Facing Changes
(none)
# Tests + Formatting
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# After Submitting
(none)
- related PR: #11463
# Description
Currently, `commands::complete::basic` fails on Windows without git
bash.
This pr fixes it.
# User-Facing Changes
(none)
# Tests + Formatting
- [x] (on Windows) `cargo fmt --all -- --check` to check standard code
formatting (`cargo fmt --all` applies these changes)
- [x] (on Windows) `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used` to check that you're using the standard code style
- [x] (on Windows without git bash, Windows with git bash and Ubuntu)
`cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- on my Windows with Japanese lang pack: 1 test still fails. (see
#11463)
- [x] (on Windows and Ubuntu) `cargo run -- -c "use std testing; testing
run-tests --path crates/nu-std"` to run the tests for the standard
library
# After Submitting
(none)
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
- this PR closes#11461
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Using `std::fs::remove_dir` instead of `std::fs::remove_file` when try
remove symlinks pointing to a directory on Windows.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
none
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- I got 2 test fails on my Windows devenv; these fails in main branch
too
- `commands::complete::basic` : passed on Ubuntu, failed on Windows (a
bug?)
- `commands::cp::copy_file_with_read_permission`: failed on Windows with
Japanese environment (This test refers error message, so that fails on
environments using a language except for english.)
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This fix has no changes to user-facing interface.
Bumps [lsp-types](https://github.com/gluon-lang/lsp-types) from 0.94.1
to 0.95.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/gluon-lang/lsp-types/blob/master/CHANGELOG.md">lsp-types's
changelog</a>.</em></p>
<blockquote>
<h2>v0.95.0 (2023-12-12)</h2>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
<h3>v0.94.2 (2023-12-12)</h3>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="ccf64e2fb6"><code>ccf64e2</code></a>
chore: Release lsp-types version 0.95.0</li>
<li><a
href="bccf50c1c6"><code>bccf50c</code></a>
Update changelog</li>
<li><a
href="75cea03884"><code>75cea03</code></a>
chore: Release lsp-types version 0.94.2</li>
<li><a
href="4084a00cd1"><code>4084a00</code></a>
Update changelog</li>
<li><a
href="b588e166be"><code>b588e16</code></a>
Merge pull request <a
href="https://redirect.github.com/gluon-lang/lsp-types/issues/274">#274</a>
from lapce/inline-completion</li>
<li><a
href="3031a76c44"><code>3031a76</code></a>
Add support for textDocument/inlineCompletion</li>
<li><a
href="038577b0b5"><code>038577b</code></a>
doc: Update readme to request links to the spec for PRs</li>
<li><a
href="f106ccb584"><code>f106ccb</code></a>
Merge pull request <a
href="https://redirect.github.com/gluon-lang/lsp-types/issues/257">#257</a>
from ahlinc/init-work-done-token</li>
<li><a
href="730924021a"><code>7309240</code></a>
Merge pull request <a
href="https://redirect.github.com/gluon-lang/lsp-types/issues/259">#259</a>
from ebkalderon/fix-telemetry-event-params</li>
<li><a
href="a15daede51"><code>a15daed</code></a>
Merge pull request <a
href="https://redirect.github.com/gluon-lang/lsp-types/issues/264">#264</a>
from tage64/master</li>
<li>Additional commits viewable in <a
href="https://github.com/gluon-lang/lsp-types/compare/v0.94.1...v0.95.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.16.25
to 1.16.26.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.16.26</h2>
<h2>[1.16.26] - 2023-12-27</h2>
<h3>Fixes</h3>
<ul>
<li>Apply <code>extend-ignore-re</code> to file names in addition to
file content</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.16.26] - 2023-12-27</h2>
<h3>Fixes</h3>
<ul>
<li>Apply <code>extend-ignore-re</code> to file names in addition to
file content</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="45a880d9f8"><code>45a880d</code></a>
chore: Release</li>
<li><a
href="1e55ede61c"><code>1e55ede</code></a>
docs: Update changelog</li>
<li><a
href="e32ec882ea"><code>e32ec88</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/886">#886</a>
from epage/olt</li>
<li><a
href="bf66cbd0b6"><code>bf66cbd</code></a>
fix(config): Apply extend-ignore-re to file names</li>
<li><a
href="a9afeef275"><code>a9afeef</code></a>
test(cli): Show extend-ignore on file names</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.16.25...v1.16.26">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This reverts #10898 which breaks external completion.
Not having file completion fallback on empty result is **intentional**
as this indicates that there is nothing to complete at this position.
To have nushell fallback to file completion the external completer can
simply return *nothing*.
`NO RECORDS FOUND`:
```nushell
let external_completer = {|spans|
[]
}
```
Fallback to file completion:
```nushell
let external_completer = {|spans|
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR bumps the nushell rust toolchain from 1.72.1 to 1.73.0 since
1.75.0 was released recently.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Finishes implementing https://github.com/nushell/nushell/issues/10598,
which asks for a spread operator in lists, in records, and when calling
commands.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR will allow spreading arguments to commands (both internal and
external). It will also deprecate spreading arguments automatically when
passing to external commands.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Users will be able to use `...` to spread arguments to custom/builtin
commands that have rest parameters or allow unknown arguments, or to any
external command
- If a custom command doesn't have a rest parameter and it doesn't allow
unknown arguments either, the spread operator will not be allowed
- Passing lists to external commands without `...` will work for now but
will cause a deprecation warning saying that it'll stop working in 0.91
(is 2 versions enough time?)
Here's a function to help with demonstrating some behavior:
```nushell
> def foo [ a, b, c?, d?, ...rest ] { [$a $b $c $d $rest] | to nuon }
```
You can pass a list of arguments to fill in the `rest` parameter using
`...`:
```nushell
> foo 1 2 3 4 ...[5 6]
[1, 2, 3, 4, [5, 6]]
```
If you don't use `...`, the list `[5 6]` will be treated as a single
argument:
```nushell
> foo 1 2 3 4 [5 6] # Note the double [[]]
[1, 2, 3, 4, [[5, 6]]]
```
You can omit optional parameters before the spread arguments:
```nushell
> foo 1 2 3 ...[4 5] # d is omitted here
[1, 2, 3, null, [4, 5]]
```
If you have multiple lists, you can spread them all:
```nushell
> foo 1 2 3 ...[4 5] 6 7 ...[8] ...[]
[1, 2, 3, null, [4, 5, 6, 7, 8]]
```
Here's the kind of error you get when you try to spread arguments to a
command with no rest parameter:
And this is the warning you get when you pass a list to an external now
(without `...`):
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added tests to cover the following cases:
- Spreading arguments to a command that doesn't have a rest parameter
(unexpected spread argument error)
- Spreading arguments to a command that doesn't have a rest parameter
*but* there's also a missing positional argument (missing positional
error)
- Spreading arguments to a command that doesn't have a rest parameter
but does allow unknown arguments, such as `exec` (allowed)
- Spreading a list literal containing arguments of the wrong type (parse
error)
- Spreading a non-list value, both to internal and external commands
- Having named arguments in the middle of rest arguments
- `explain`ing a command call that spreads its arguments
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Examples
Suppose you have multiple tables:
```nushell
let people = [[id name age]; [0 alice 100] [1 bob 200] [2 eve 300]]
let evil_twins = [[id name age]; [0 ecila 100] [-1 bob 200] [-2 eve 300]]
```
Maybe you often find yourself needing to merge multiple tables and want
a utility to do that. You could write a function like this:
```nushell
def merge_all [ ...tables ] { $tables | reduce { |it, acc| $acc | merge $it } }
```
Then you can use it like this:
```nushell
> merge_all ...([$people $evil_twins] | each { |$it| $it | select name age })
╭───┬───────┬─────╮
│ # │ name │ age │
├───┼───────┼─────┤
│ 0 │ ecila │ 100 │
│ 1 │ bob │ 200 │
│ 2 │ eve │ 300 │
╰───┴───────┴─────╯
```
Except they had duplicate columns, so now you first want to suffix every
column with a number to tell you which table the column came from. You
can make a command for that:
```nushell
def select_and_merge [ --cols: list<string>, ...tables ] {
let renamed_tables = $tables
| enumerate
| each { |it|
$it.item | select $cols | rename ...($cols | each { |col| $col + ($it.index | into string) })
};
merge_all ...$renamed_tables
}
```
And call it like this:
```nushell
> select_and_merge --cols [name age] $people $evil_twins
╭───┬───────┬──────┬───────┬──────╮
│ # │ name0 │ age0 │ name1 │ age1 │
├───┼───────┼──────┼───────┼──────┤
│ 0 │ alice │ 100 │ ecila │ 100 │
│ 1 │ bob │ 200 │ bob │ 200 │
│ 2 │ eve │ 300 │ eve │ 300 │
╰───┴───────┴──────┴───────┴──────╯
```
---
Suppose someone's made a command to search for APT packages:
```nushell
# The main command
def search-pkgs [
--install # Whether to install any packages it finds
log_level: int # Pretend it's a good idea to make this a required positional parameter
exclude?: list<string> # Packages to exclude
repositories?: list<string> # Which repositories to look in (searches in all if not given)
...pkgs # Package names to search for
] {
{ install: $install, log_level: $log_level, exclude: ($exclude | to nuon), repositories: ($repositories | to nuon), pkgs: ($pkgs | to nuon) }
}
```
It has a lot of parameters to configure it, so you might make your own
helper commands to wrap around it for specific cases. Here's one
example:
```nushell
# Only look for packages locally
def search-pkgs-local [
--install # Whether to install any packages it finds
log_level: int
exclude?: list<string> # Packages to exclude
...pkgs # Package names to search for
] {
# All required and optional positional parameters are given
search-pkgs --install=$install $log_level [] ["<local URI or something>"] ...$pkgs
}
```
And you can run it like this:
```nushell
> search-pkgs-local --install=false 5 ...["python2.7" "vim"]
╭──────────────┬──────────────────────────────╮
│ install │ false │
│ log_level │ 5 │
│ exclude │ [] │
│ repositories │ ["<local URI or something>"] │
│ pkgs │ ["python2.7", vim] │
╰──────────────┴──────────────────────────────╯
```
One thing I realized when writing this was that if we decide to not
allow passing optional arguments using the spread operator, then you can
(mis?)use the spread operator to skip optional parameters. Here, I
didn't want to give `exclude` explicitly, so I used a spread operator to
pass the packages to install. Without it, I would've needed to do
`search-pkgs-local --install=false 5 [] "python2.7" "vim"` (explicitly
pass `[]` (or `null`, in the general case) to `exclude`). There are
probably more idiomatic ways to do this, but I just thought it was
something interesting.
If you're a virologist of the [xkcd](https://xkcd.com/350/) kind,
another helper command you might make is this:
```nushell
# Install any packages it finds
def live-dangerously [ ...pkgs ] {
# One optional argument was given (exclude), while another was not (repositories)
search-pkgs 0 [] ...$pkgs --install # Flags can go after spread arguments
}
```
Running it:
```nushell
> live-dangerously "git" "*vi*" # *vi* because I don't feel like typing out vim and neovim
╭──────────────┬─────────────╮
│ install │ true │
│ log_level │ 0 │
│ exclude │ [] │
│ repositories │ null │
│ pkgs │ [git, *vi*] │
╰──────────────┴─────────────╯
```
Here's an example that uses the spread operator more than once within
the same command call:
```nushell
let extras = [ chrome firefox python java git ]
def search-pkgs-curated [ ...pkgs ] {
(search-pkgs
1
[emacs]
["example.com", "foo.com"]
vim # A must for everyone!
...($pkgs | filter { |p| not ($p | str contains "*") }) # Remove packages with globs
python # Good tool to have
...$extras
--install=false
python3) # I forget, did I already put Python in extras?
}
```
Running it:
```nushell
> search-pkgs-curated "git" "*vi*"
╭──────────────┬───────────────────────────────────────────────────────────────────╮
│ install │ false │
│ log_level │ 1 │
│ exclude │ [emacs] │
│ repositories │ [example.com, foo.com] │
│ pkgs │ [vim, git, python, chrome, firefox, python, java, git, "python3"] │
╰──────────────┴───────────────────────────────────────────────────────────────────╯
```
Intends to close#8920
This PR suggests a new flag for the `http` commands, `--redirect-mode`,
which enables users to choose between different redirect handling modes.
The current behaviour of letting ureq silently follow redirects remains
the default, but two new options are introduced here, following the lead
of [JavaScript's `fetch`
API](https://developer.mozilla.org/en-US/docs/Web/API/fetch#redirect):
"manual", where any 3xx response to a request is simply returned as the
command's result, and "error", where any 3xx response causes a network
error like those caused by 4xx and 5xx responses.
This PR is a draft. Tests have not been added or run, the flag is
currently only implemented for the `http get` command, and design tweaks
are likely to be appropriate.
Most notably, it's not obvious to me whether a single flag which can
take one of three values is the nicest solution here.
We might instead consider two binary flags (like
`--no-following-redirects` and `--disallow-redirects`, although I'm bad
at naming things so I need help with that anyway), or completely drop
the "error" option if it's not deemed useful enough. (I personally think
it has some merit, especially since 4xx and 5xx responses are already
treated as errors by default; So this would allow users to treat only
immediate 2xx responses as success)
# User-facing changes
New options for the `http [method]` commands. Behaviour remains
unchanged when the command line flag introduced here is not used.
# Description
Currently, when writing a record, if you don't give the value for a
field, the syntax error highlights the entire record instead of
pinpointing the issue. Here's some examples:
```nushell
> { a: 2, 3 } # Missing colon (and value)
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #2:1:1]
1 │ { a: 2, 3 }
· ─────┬─────
· ╰── expected record
╰────
> { a: 2, 3: } # Missing value
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #3:1:1]
1 │ { a: 2, 3: }
· ──────┬─────
· ╰── expected record
╰────
> { a: 2, 3 4 } # Missing colon
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #4:1:1]
1 │ { a: 2, 3 4 }
· ──────┬──────
· ╰── expected record
╰────
```
In all of them, the entire record is highlighted red because an
`Expr::Garbage` is returned covering that whole span:
This PR is for highlighting only the part inside the record that could
not be parsed. If the record literal is big, an error message pointing
to the start of where the parser thinks things went wrong should help
people fix their code.
# User-Facing Changes
Below are screenshots of the new errors:
If there's a stray record key right before the record ends, it
highlights only that key and tells the user it expected a colon after
it:
If the record ends before the value for the last field was given, it
highlights the key and colon of that field and tells the user it
expected a value after the colon:
If there are two consecutive expressions without a colon between them,
it highlights everything from the second expression to the end of the
record and tells the user it expected a colon. I was tempted to add a
help message suggesting adding a colon in between, but that may not
always be the right thing to do.
# Tests + Formatting
# After Submitting
# Description
`Expression::replace_in_variable` is only called in one place, and it is
called with `new_var_id` = `IN_VARIABLE_ID`. So, it ends up doing
nothing. E.g., adding `debug_assert_eq!(new_var_id, IN_VARIABLE_ID)` in
`replace_in_variable` does not trigger any panic.
# User-Facing Changes
Breaking change for `nu_protocol`.
# Description
Fixes#11382
# User-Facing Changes
* before
```console
nushell/test (109f629) [✘?]
❯ open hello.md
hello
nushell/test (109f629) [✘?]
❯ ls hello.md | get size
╭───┬─────╮
│ 0 │ 6 B │
╰───┴─────╯
nushell/test (109f629) [✘?]
❯ open --raw hello.md | prepend "world" | save --raw --force hello.md
^C
nushell/test (109f629) [✘?]
❯ ls hello.md | get size
╭───┬─────────╮
│ 0 │ 2.8 GiB │
╰───┴─────────╯
```
* after
```console
nushell/test on fix_save [✘!?⇡]
❯ open hello.md | prepend "hello" | save --force hello.md
nushell/test on fix_save [✘!?⇡]
❯ open --raw hello.md | prepend "hello" | save --raw --force ../test/hello.md
Error: × pipeline input and output are same file
╭─[entry #4:1:1]
1 │ open --raw hello.md | prepend "hello" | save --raw --force ../test/hello.md
· ────────┬───────
· ╰── can't save output to '/data/source/nushell/test/hello.md' while it's being reading
╰────
help: you should change output path
nushell/test on fix_save [✘!?⇡]
❯ open hello | prepend "hello" | save --force hello
Error: × pipeline input and output are same file
╭─[entry #5:1:1]
1 │ open hello | prepend "hello" | save --force hello
· ──┬──
· ╰── can't save output to '/data/source/nushell/test/hello' while it's being reading
╰────
help: you should change output path
```
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [x] add `commands::save::save_same_file_with_extension`
- [x] add `commands::save::save_same_file_without_extension`
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# After Submitting
As `--workspace/--all` pulls in all crates in the workspace for `cargo
test --workspace` let's make sure that the `polars` family of
dependencies are also feature gated so they only build for `--features
dataframe`. The test modules themselves also depend on the feature.
Should speed up a bare `cargo test --workspace`
# Description
With #11386 we don't have any nushell-internal code directly accessing
the `vals` field of `Record`, so let's make it private so everyone in
the future uses the checked ways guaranteeing matching cols/vals.
The `cols` feel has to remain pub for now as `rename` still directly
mutates this field. See #11020 for challenges for this refactor.
# Plugin-Author-Facing Changes
This is a breaking change for outside plugins that relied on the `pub`
fields.
When running `cargo test --workspace` a file `crates/nu-command/a.txt`
remained which we also saw as an accidential additions in some commits.
Searching for `a.txt` narrowed it down that
`redirection_keep_exit_codes` was not sandboxed in a temporary directory
and created this file.
Went through redirection tests and placed them in a `Playground` to get
sandboxing `dirs` for `nu!(cwd:`.
For those tests where redirection fails and no file should be created
now I added a check that no file is created on accident.
- Sandbox `redirection_keep_exit_codes` test
- Sandbox `no_duplicate_redirection` test
- Check that no redirect file is created on error
- Sandbox `redirection_should_have_a_target` test
Fixes#11396
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
If a directory name is an exact match, the completer stops greedily
matching directories with the same prefix.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Completions should work as described in #11396.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Simplifies `SIGQUIT` protection to a single `signal` ignore system call.
# User-Facing Changes
`SIGQUIT` is no longer blocked if nushell is in non-interactive mode
(signals should not be blocked in non-interactive mode).
Also a breaking API change for `nu_protocol`.
# Tests + Formatting
Should come after #11178 for testing.
# Description
Constructing the internals of `Record` without checking the lengths is
bad. (also incompatible with changes to how we store records)
- Use `Record::from_raw_cols_vals` in dataframe code
- Use `record!` macro in dataframe test
- Use `record!` in `nu-color-config` tests
- Stop direct record construction in `nu-command`
- Refactor table construction in `from nuon`
# User-Facing Changes
None
# Tests + Formatting
No new tests, updated tests in equal fashion
While the `cargo` tools will include crates we depend on in the
directory into the workspace, I observed dependabot not taking all of
our crates into account in its version bump attempts leading to
duplication of outside dependencies.
e.g.
- https://github.com/nushell/nushell/pull/11039
# Description
While #11057 is merged, it's hard to tell the difference between
`--flag: bool` and `--flag`, and it makes user hard to read custom
commands' signature, and hard to use them correctly.
After discussion, I think we can deprecate `--flag: bool` usage, and
encourage using `--flag` instead.
# User-Facing Changes
The following code will raise warning message, but don't stop from
running.
```nushell
❯ def florb [--dry-run: bool, --another-flag] { "aaa" }; florb
Error: × Deprecated: --flag: bool
╭─[entry #7:1:1]
1 │ def florb [--dry-run: bool, --another-flag] { "aaa" }; florb
· ──┬─
· ╰── `--flag: bool` is deprecated. Please use `--flag` instead, more info: https://www.nushell.sh/book/custom_commands.html
╰────
aaa
```
cc @kubouch
# Tests + Formatting
Done
# After Submitting
- [ ] Add more information under
https://www.nushell.sh/book/custom_commands.html to indicate `--dry-run:
bool` is not allowed,
- [ ] remove `: bool` from custom commands between 0.89 and 0.90
---------
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
# Description
Hi! I updated the samples of `str trim` because there were repeated and
clarified the explanations
# User-Facing Changes
Yes! I send the details here:
(`old` is version `88.1` not the latest main)
# Tests + Formatting
~~I ran `toolkit check pr` successfully~~
There was a tiny problem, a test I never touched now it's failing
```nu
(^echo a | complete) == {stdout: "a\n", exit_code: 0}
```
should output `true` but outputs `false`, both in my running `nu`
version and in my PR version
This make the test `nu-command::main commands::complete::basic` fail
located in `crates\nu-command\tests\commands\complete.rs`
# After Submitting
I'm not sure if I need to update nushell.github.io, some of the help is
auto-generated, but maybe not all?
I can file a PR if needed
# Description
Following from #11356, it looks like `Expr::MatchPattern` is no longer
used in any way. This PR removes `Expr::MatchPattern` alongside
`Type::MatchPattern` and `SyntaxShape::MatchPattern`.
# User-Facing Changes
Breaking API change for `nu_protocol`.
# Description
Fixes: #11310
# User-Facing Changes
After the change, the following code will go to error:
```nushell
> def a [--x: int = 3] { "aa" }
> let y = "aa"
> a --x=$y
Error: nu::parser::type_mismatch
× Type mismatch.
╭─[entry #32:2:1]
2 │ let y = "aa"
3 │ a --x=$y
· ─┬
· ╰── expected int, found string
╰────
```
Bumps [shadow-rs](https://github.com/baoyachi/shadow-rs) from 0.24.1 to
0.25.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f08828be45"><code>f08828b</code></a>
Update Cargo.toml</li>
<li><a
href="a3cc1a118f"><code>a3cc1a1</code></a>
Update README.md</li>
<li><a
href="96fdafc738"><code>96fdafc</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/144">#144</a>
from baoyachi/wasm_example</li>
<li><a
href="24d3bd82c0"><code>24d3bd8</code></a>
fix</li>
<li><a
href="aab9bf2d4d"><code>aab9bf2</code></a>
Update check.yml</li>
<li><a
href="1d4e455730"><code>1d4e455</code></a>
add wasm example</li>
<li>See full diff in <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.24.1...v0.25.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR add special handling in `debug -r` for emoji's so that it prints
the code points.
### Before
```nushell
❯ emoji --list | where name =~ farmer | reject utf8_bytes | get 0.emoji | debug -r
String {
val: "🧑\u{200d}🌾",
internal_span: Span {
start: 0,
end: 0,
},
}
```
### After
```nushell
❯ emoji --list | where name =~ farmer | reject utf8_bytes | get 0.emoji | debug -r
String {
val: "\\u{1f9d1}\\u{200d}\\u{1f33e}",
internal_span: Span {
start: 0,
end: 0,
},
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes build for BSD variants (including FreeBSD and NetBSD).
Currently, `procfs` only support linux, android and l4re, and
0cba269d80 only adds support for NetBSD,
this PR should work on all BSD variants.
b153b782a5/procfs/build.rs (L4-L8)Fixes#11373
# User-Facing Changes
* before
```console
nibon7@fbsd /d/s/nushell ((70f7db14))> cargo build
Compiling tempfile v3.8.1
Compiling procfs v0.16.0
Compiling toml_edit v0.21.0
Compiling native-tls v0.2.11
error: failed to run custom build command for `procfs v0.16.0`
Caused by:
process didn't exit successfully: `/data/source/nushell/target/debug/build/procfs-d59599f40f32f0d5/build-script-build` (exit status: 1)
--- stderr
Building procfs on an for a unsupported platform. Currently only linux and android are supported
(Your current target_os is freebsd)
warning: build failed, waiting for other jobs to finish...
```
* after
```console
nushell on bsd [✘!?] is 📦 v0.88.2 via 🦀 v1.74.1
❯ version
╭────────────────────┬───────────────────────────────────────────╮
│ version │ 0.88.2 │
│ branch │ bsd │
│ commit_hash │ 151edef186 │
│ build_os │ freebsd-x86_64 │
│ build_target │ x86_64-unknown-freebsd │
│ rust_version │ rustc 1.74.1 (a28077b28 2023-12-04) │
│ rust_channel │ stable-x86_64-unknown-freebsd │
│ cargo_version │ cargo 1.74.1 (ecb9851af 2023-10-18) │
│ build_time │ 2023-12-19 10:12:15 +00:00 │
│ build_rust_channel │ debug │
│ allocator │ mimalloc │
│ features │ default, extra, sqlite, trash, which, zip │
│ installed_plugins │ │
╰────────────────────┴───────────────────────────────────────────╯
nushell on bsd [✘!?] is 📦 v0.88.2 via 🦀 v1.74.1
❯ cargo test --workspace commands::ulimit e>> /dev/null | rg ulimit
test commands::ulimit::limit_set_filesize2 ... ok
test commands::ulimit::limit_set_filesize1 ... ok
test commands::ulimit::limit_set_hard1 ... ok
test commands::ulimit::limit_set_hard2 ... ok
test commands::ulimit::limit_set_invalid1 ... ok
test commands::ulimit::limit_set_invalid3 ... ok
test commands::ulimit::limit_set_invalid4 ... ok
test commands::ulimit::limit_set_invalid5 ... ok
test commands::ulimit::limit_set_soft2 ... ok
test commands::ulimit::limit_set_soft1 ... ok
nushell on bsd [✘!?] is 📦 v0.88.2 via 🦀 v1.74.1
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
this PR is two-fold
- make `use` and `overlay use` use the same completion algorithm in
48f29b633
- list directory modules in completions of both with 402acde5c
# User-Facing Changes
i currently have the following in my `NU_LIB_DIRS`
<details>
<summary>click to see the script</summary>
```nushell
for dir in $env.NU_LIB_DIRS {
print $dir
print (ls $dir --short-names | select name type)
}
```
</details>
```
/home/amtoine/.local/share/nupm/modules
#┬────────name────────┬type
0│nu-git-manager │dir
1│nu-git-manager-sugar│dir
2│nu-hooks │dir
3│nu-scripts │dir
4│nu-themes │dir
5│nupm │dir
─┴────────────────────┴────
/home/amtoine/.config/nushell/overlays
#┬──name──┬type
0│ocaml.nu│file
─┴────────┴────
```
> **Note**
> all the samples below are run from the Nushell repo, i.e. a directory
with a `toolkit.nu` module
## before the changes
- `use` would give me `["ocaml.nu", "toolkit.nu"]`
- `overlay use` would give me `[]`
## after the changes
both commands give me
```nushell
[
"nupm/",
"ocaml.nu",
"toolkit.nu",
"nu-scripts/",
"nu-git-manager/",
"nu-git-manager-sugar/",
]
```
# Tests + Formatting
- adds a new `directory_completion/mod.nu` to the completion fixtures
- make sure `source-env`, `use` and `overlay-use` are all tested in the
_dotnu_ test
- fix all the other tests that use completions in the fixtures directory
for completions
# After Submitting
fix on android/termux fails to cd into /sdcard or any directory that
user has access via group
fixes#8095
I am not aware how this works on other platform so feel free to modify
this pr or even close it if it is not correct
# Description
on android or on linux to check if the user belongs to given directory
group, use `libc::getgroups` function
# User-Facing Changes
NA
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.16.24
to 1.16.25.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.16.25</h2>
<h2>[1.16.25] - 2023-12-13</h2>
<h3>Fixes</h3>
<ul>
<li>Have correction in <code>extend-words</code> match the original
word's case</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.16.25] - 2023-12-13</h2>
<h3>Fixes</h3>
<ul>
<li>Have correction in <code>extend-words</code> match the original
word's case</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="5bd389de71"><code>5bd389d</code></a>
chore: Release</li>
<li><a
href="8dbecf3e45"><code>8dbecf3</code></a>
docs: Update changelog</li>
<li><a
href="f8f8c6edf1"><code>f8f8c6e</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/884">#884</a>
from epage/custom</li>
<li><a
href="55d802d0ef"><code>55d802d</code></a>
fix(dict): Mirror original case for custom dict</li>
<li><a
href="86c4c9fb4a"><code>86c4c9f</code></a>
test(cli): Add reproduction case</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.16.24...v1.16.25">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR is basically a copy of #10986 by @CAD97, which made
`$env.PROMPT_COMMAND` only run once per prompt, but @fdncred found an
issue where hitting Enter would make the transient prompt appear and be
immediately overwritten by the regular prompt, so it was
[reverted](https://github.com/nushell/nushell/pull/11340).
https://github.com/nushell/nushell/pull/10788 was also made to do the
same thing as #10986 but that ended up having the same issue. For some
reason, this branch doesn't have that problem, although I haven't
figured out why yet.
@CAD97, if you have any inputs or want to make your own PR, let me know.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
When hitting enter, the prompt shouldn't blink in place anymore.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
`Value::MatchPattern` implies that `MatchPattern`s are first-class
values. This PR removes this case, and commands must now instead use
`Expr::MatchPattern` to extract `MatchPattern`s just like how the
`match` command does using `Expr::MatchBlock`.
# User-Facing Changes
Breaking API change for `nu_protocol` crate.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Fixes#11260
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Note: my issue description was a bit wrong. Issue one can't be
reproduced without a config (`shell_integration` isn't on by default,
so..), however the issue itself is still valid
For issue 1, the default prompt needs to know about the
`shell_integration` config, and the markers are added around the default
prompt when that's on.
For issue 2, this is actually related to transient prompts. When
rendering, the markers weren't added like for normal prompts.
After the fix the output do now contain the proper markers:
Reproducing the minimum config here for convenience:
```nu
$env.config = {
show_banner: false
shell_integration: true
}
# $env.PROMPT_COMMAND = {|| "> " }
```
For issue 1, the output looks like:
```
[2.3490236,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\/home/steven\u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:31:58 PM\u001b8\u001b[0m\u001b[0m\u001b[1;36mecho\u001b[0m\u001b7\u001b8\u001b[?25h"]
[2.5676293,"o","\u001b[6n"]
[2.571353,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\\u001b]133;A\u001b\\/home/steven\u001b]133;B\u001b\\\u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:31:59 PM\u001b8\u001b[0m\u001b[0m\u001b[1;36mecho\u001b[0m\u001b7\u001b8\u001b[?25h\u001b[21;1H\r\n\u001b[21;1H"]
[2.571436,"o","\u001b[?2004l"]
[2.5714657,"o","\u001b]133;C\u001b\\"]
```
in line 3, where enter is pressed, `133 A` and `B` are present.
Same for issue 2 (uncomment the `PROMPT_COMMAND` line in the config):
```
[1.9585224,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\> \u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:32:15 PM\u001b8\u001b[0m\u001b[0m\u001b[1;36mecho\u001b[0m\u001b7\u001b8\u001b[?25h"]
[2.453972,"o","\u001b[6n"]
[2.4585786,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\\u001b]133;A\u001b\\> \u001b]133;B\u001b\\\u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:32:15 PM\u001b8\u001b[0m\u001b[0m\u001b[1;36mecho\u001b[0m\u001b7\u001b8\u001b[?25h\u001b[21;1H\r\n\u001b[21;1H\u001b[?2004l\u001b]133;C\u001b\\\r\n\u001b]133;D;0\u001b\\\u001b]7;file://Aostro-5468/home/steven\u001b\\\u001b]2;~\u0007\u001b[?1l"]
[2.4669976,"o","\u001b[?2004h\u001b[6n"]
[2.4703515,"o","\u001b[6n"]
[2.4736586,"o","\u001b[?25l\u001b[21;1H\u001b[21;1H\u001b[J\u001b[38;5;10m\u001b]133;A\u001b\\> \u001b]133;B\u001b\\\u001b[38;5;14m\u001b[38;5;5m\u001b7\u001b[21;84H12/16/2023 03:32:15 PM\u001b8\u001b[0m\u001b[0m\u001b7\u001b8\u001b[?25h"]
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None user facing changes other than that prompt markers are working
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This pr allow us to use `filesize` type as a valid limit value, which is
benefit for some file size based limits.
# User-Facing Changes
```console
/data/source/nushell> ulimit -f
╭───┬─────────────────────────────────────────────────────┬───────────┬───────────╮
│ # │ description │ soft │ hard │
├───┼─────────────────────────────────────────────────────┼───────────┼───────────┤
│ 0 │ Maximum size of files created by the shell (kB, -f) │ unlimited │ unlimited │
╰───┴─────────────────────────────────────────────────────┴───────────┴───────────╯
/data/source/nushell> ulimit -f 10Mib
/data/source/nushell> ulimit -f
╭───┬─────────────────────────────────────────────────────┬───────┬───────╮
│ # │ description │ soft │ hard │
├───┼─────────────────────────────────────────────────────┼───────┼───────┤
│ 0 │ Maximum size of files created by the shell (kB, -f) │ 10240 │ 10240 │
╰───┴─────────────────────────────────────────────────────┴───────┴───────╯
/data/source/nushell> ulimit -n
╭───┬──────────────────────────────────────────────┬──────┬────────╮
│ # │ description │ soft │ hard │
├───┼──────────────────────────────────────────────┼──────┼────────┤
│ 0 │ Maximum number of open file descriptors (-n) │ 1024 │ 524288 │
╰───┴──────────────────────────────────────────────┴──────┴────────╯
/data/source/nushell> ulimit -n 10Mib
Error: nu:🐚:type_mismatch
× Type mismatch.
╭─[entry #5:1:1]
1 │ ulimit -n 10Mib
· ─┬─
· ╰── filesize is not compatible with resource RLIMIT_NOFILE
╰────
```
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [x] add `commands::ulimit::limit_set_filesize1`
- [x] add `commands::ulimit::limit_set_filesize2`
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# Description
This PR allows `int` type as a valid limit value for `ulimit`, so there
is no need to use `into string` to convert limit values in the tests.
# User-Facing Changes
N/A
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [x] add `commands::ulimit::limit_set_invalid3`
- [x] add `commands::ulimit::limit_set_invalid4`
- [x] add `commands::ulimit::limit_set_invalid5`
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
moonlander pointed out in Discord that the transient prompt feature
added in release 0.86 (implemented in #10391) is causing the normal
prompt to be redrawn when the transient prompt variables are unset or
set to null. This PR is for fixing that, although it's more of a bandaid
fix. Maybe the transient prompt feature should be taken out entirely for
now so more thought can be given to its implementation.
Previously, I'd thought that when reedline redraws the prompt after a
command is entered, it's a whole new prompt, but apparently it's
actually the same prompt as the current line (?). So now, `nu_prompt` in
`repl.rs` is an `Arc<RwLock<NushellPrompt>>` (rather than just a
`NushellPrompt`), and this `Arc` is shared with the `TransientPrompt`
object so that if it can't find one of the `TRANSIENT_PROMPT_*`
variables, it uses a segment from `NushellPrompt` rather than
re-evaluate `PROMPT_COMMAND`, `PROMPT_COMMAND_RIGHT`, etc. Using an
`RwLock` means that there's a bunch of `.expect()`s all over the place,
which is not nice. It could perhaps be avoided with some changes on the
reedline side.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`$env.PROMPT_COMMAND` (and other such variables) should no longer be
executed twice if the corresponding `$env.TRANSIENT_PROMPT_*` variable
is not set.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# Steps to reproduce
Described by moonlander in Discord
[here](https://discord.com/channels/601130461678272522/614593951969574961/1164928022126792844).
Adding this to `env.nu` will result in `11` being added to
`/tmp/run_count` every time any command is run. The expected behavior is
a single `1` being added to `/tmp/run_count` instead of two. The prompt
command should not be executed again when the prompt is redrawn after a
command is executed.
```nu
$env.PROMPT_COMMAND = {||
touch /tmp/run_count
'1' | save /tmp/run_count --append
'>'
}
# $env.TRANSIENT_PROMPT_COMMAND not set
```
If the following is added to `env.nu`, then `12` will be added to
`/tmp/run_count` every time any command is run, which is expected
behavior because the normal prompt command must be displayed the first
time the prompt is shown, then the transient prompt command is run when
the prompt is redrawn.
```nu
$env.TRANSIENT_PROMPT_COMMAND = {||
touch /tmp/run_count
'2' | save /tmp/run_count --append
'>'
}
```
Here's a screenshot of what adding that first snippet looks like (`cargo
run` in the `main` branch):
Here's a screenshot of what it looks like with this PR (only one `1` is
added to `/tmp/run_count` each time):
Reverts nushell/nushell#10986
@CAD97 This isn't working right. I have a 2 line prompt with a transient
prompt. on enter, you see the transient prompt drawn and then the normal
prompt overwrites it.
# Description
This PR updates to the latest reedline main branch which includes
reedline 27.1 and reedline PR
https://github.com/nushell/reedline/pull/675 for better resize behavior.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Hi! A few days ago I changed the hover from `--ide-lsp` to match `help`
#11284, now this PR is doing the same but for the new `--lsp` server
I also did some tiny fixes to syntax, with some clippy `pedantic` lints
# User-Facing Changes
# Tests + Formatting
✅ ran `toolkit check pr`
# Description
If `$env.TRANSIENT_PROMPT_COMMAND` is not set, use the prompt created by
`$env.PROMPT_COMMAND` instead of running the command a second time. As a
side effect, `$env.TRANSIENT_PROMPT_COMMAND` now runs after the hooks
`pre_prompt` and `env_change`, instead of before.
# User-Facing Changes
- `$env.PROMPT_COMMAND` gets run only once per prompt instead of twice
- `$env.TRANSIENT_PROMPT_COMMAND` now sees any environment set in a
`pre_prompt` or `env_change` hook, like `$env.PROMPT_COMMAND` does
# Description
Add `ulimit` command to Nushell.
Closes#9563Closes#3976
Related pr #11246
Reference:
https://github.com/fish-shell/fish-shell/blob/master/fish-rust/src/builtins/ulimit.rshttps://github.com/mirror/busybox/blob/master/shell/shell_common.c#L529
# User-Facing Changes
```
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1 [3/246]
❯ ulimit -a
╭────┬──────────────────────────────────────────────────────────────────────────┬───────────┬───────────╮
│ # │ description │ soft │ hard │
├────┼──────────────────────────────────────────────────────────────────────────┼───────────┼───────────┤
│ 0 │ Maximum size of core files created (kB, -c) │ unlimited │ unlimited │
│ 1 │ Maximum size of a process's data segment (kB, -d) │ unlimited │ unlimited │
│ 2 │ Controls of maximum nice priority (-e) │ 0 │ 0 │
│ 3 │ Maximum size of files created by the shell (kB, -f) │ unlimited │ unlimited │
│ 4 │ Maximum number of pending signals (-i) │ 55273 │ 55273 │
│ 5 │ Maximum size that may be locked into memory (kB, -l) │ 8192 │ 8192 │
│ 6 │ Maximum resident set size (kB, -m) │ unlimited │ unlimited │
│ 7 │ Maximum number of open file descriptors (-n) │ 1024 │ 524288 │
│ 8 │ Maximum bytes in POSIX message queues (kB, -q) │ 800 │ 800 │
│ 9 │ Maximum realtime scheduling priority (-r) │ 0 │ 0 │
│ 10 │ Maximum stack size (kB, -s) │ 8192 │ unlimited │
│ 11 │ Maximum amount of CPU time in seconds (seconds, -t) │ unlimited │ unlimited │
│ 12 │ Maximum number of processes available to the current user (-u) │ 55273 │ 55273 │
│ 13 │ Maximum amount of virtual memory available to each process (kB, -v) │ unlimited │ unlimited │
│ 14 │ Maximum number of file locks (-x) │ unlimited │ unlimited │
│ 15 │ Maximum contiguous realtime CPU time (-y) │ unlimited │ unlimited │
╰────┴──────────────────────────────────────────────────────────────────────────┴───────────┴───────────╯
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1
❯ ulimit -s
╭───┬─────────────────────────────┬──────┬───────────╮
│ # │ description │ soft │ hard │
├───┼─────────────────────────────┼──────┼───────────┤
│ 0 │ Maximum stack size (kB, -s) │ 8192 │ unlimited │
╰───┴─────────────────────────────┴──────┴───────────╯
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1
❯ ulimit -s 100
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1
❯ ulimit -s
╭───┬─────────────────────────────┬──────┬──────╮
│ # │ description │ soft │ hard │
├───┼─────────────────────────────┼──────┼──────┤
│ 0 │ Maximum stack size (kB, -s) │ 100 │ 100 │
╰───┴─────────────────────────────┴──────┴──────╯
nushell on ulimit is 📦 v0.88.2 via 🦀 v1.72.1
```
# Tests + Formatting
- [x] add commands::ulimit::limit_set_soft1
- [x] add commands::ulimit::limit_set_soft2
- [x] add commands::ulimit::limit_set_hard1
- [x] add commands::ulimit::limit_set_hard2
- [x] add commands::ulimit::limit_set_invalid1
- [x] add commands::ulimit::limit_set_invalid2
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# Description
Since there are plans to add more history commands, it seems sensible to
put them into their own module and category
https://github.com/nushell/nushell/pull/10440#issuecomment-1731408785
# User-Facing Changes
The history commands are in the category "History" rather than "Misc"
should
- close https://github.com/nushell/nushell/issues/11133
# Description
to allow more freedom when writing complex modules, we are disabling the
auto-export of director modules.
the change was as simple as removing the crawling of files and modules
next to any `mod.nu` and update the standard library.
# User-Facing Changes
users will have to explicitely use `export module <mod>` to define
submodules and `export use <mod> <cmd>` to re-export definitions, e.g.
```nushell
# my-module/mod.nu
export module foo.nu # export a submodule
export use bar.nu bar-1 # re-export an internal command
export def top [] {
print "`top` from `mod.nu`"
}
```
```nushell
# my-module/foo.nu
export def "foo-1" [] {
print "`foo-1` from `lib/foo.nu`"
}
export def "foo-2" [] {
print "`foo-2` from `lib/foo.nu`"
}
```
```nushell
# my-module/bar.nu
export def "bar-1" [] {
print "`bar-1` from `lib/bar.nu`"
}
```
# Tests + Formatting
i had to add `export module` calls in the `tests/modules/samples/spam`
directory module and allow the `not_allowed` module to not give an
error, it is just empty, which is fine.
# After Submitting
- mention in the release note
- update the following repos
```
#┬─────name─────┬version┬─type─┬─────────repo─────────
0│nu-git-manager│0.4.0 │module│amtoine/nu-git-manager
1│nu-scripts │0.1.0 │module│amtoine/scripts
2│nu-zellij │0.1.0 │module│amtoine/zellij-layouts
3│nu-scripts │0.1.0 │module│nushell/nu_scripts
4│nupm │0.1.0 │module│nushell/nupm
─┴──────────────┴───────┴──────┴──────────────────────
```
Second attempt at polars Struct support. This version avoid using unsafe
checks by cloning the StructArray and utilizing the into_static to
convert to a StructOwned.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.16.23
to 1.16.24.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.16.24</h2>
<h2>[1.16.24] - 2023-12-08</h2>
<h3>Fixes</h3>
<ul>
<li>Don't silently ignore config when there is an error in a field</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.16.24] - 2023-12-08</h2>
<h3>Fixes</h3>
<ul>
<li>Don't silently ignore config when there is an error in a field</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="548ac37a5d"><code>548ac37</code></a>
chore: Release</li>
<li><a
href="a838b1820f"><code>a838b18</code></a>
chore: Release</li>
<li><a
href="44e4455f33"><code>44e4455</code></a>
docs: Update changelog</li>
<li><a
href="4362a6e5e4"><code>4362a6e</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/882">#882</a>
from epage/regex</li>
<li><a
href="1b92c0182c"><code>1b92c01</code></a>
fix(config): Propagate validation errors</li>
<li><a
href="632b256901"><code>632b256</code></a>
test: Demonstrate bad config bug</li>
<li><a
href="8dec26e3c6"><code>8dec26e</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/879">#879</a>
from epage/update</li>
<li><a
href="69f4b1eaff"><code>69f4b1e</code></a>
chore: Move off deprecated</li>
<li><a
href="cb9b485bd3"><code>cb9b485</code></a>
chore: Update from '_rust/main'</li>
<li><a
href="8c836eaa9d"><code>8c836ea</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/10">#10</a> from
epage/renovate/migrate-config</li>
<li>Additional commits viewable in <a
href="https://github.com/crate-ci/typos/compare/v1.16.23...v1.16.24">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This updates all the positional arguments (except with
`--features=dataframe` or `--features=extra`) to start with an uppercase
letter and end with a period.
Part of #5066, specifically [this
comment](/nushell/nushell/issues/5066#issuecomment-1421528910)
Some arguments had example data removed from them because it also
appears in the examples.
There are other inconsistencies in positional arguments I noticed while
making the tests pass which I will bring up in #5066.
# User-Facing Changes
Positional arguments are now consistent
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Automatic documentation updates
# Description
Fixes: #11295
Sorry for introducing such issue.
The issue is caused by we wrongly set `redirect_stdout` and
`redirect_stderr` during eval, take the following as example:
```nushell
ls | bat --paging always
```
When running `bat --paging always`, `redirect_stdout` should be `false`.
But before this pr, it's set to true due to `ls` command, and then the
`true` value will go to all remaining commands.
# User-Facing Changes
NaN
# Tests + Formatting
Sorry I don't think we have a way to test it. Because it needs to be
tested on interactive command like `nvim`.
# After Submitting
NaN
# Description
Running `cargo install nu` on rustc 1.71.1 (eb26296b5 2023-08-03)
produced the following error message when reaching `nu-command v0.88.0`:
```sh
error[E0659]: `open` is ambiguous
--> /home/antoine/.cargo/registry/src/index.crates.io-6f17d22bba15001f/nu-command-0.88.0/src/stor/mod.rs:30:9
|
30 | pub use open::StorOpen;
| ^^^^ ambiguous name
|
= note: ambiguous because of multiple potential import sources
= note: `open` could refer to a crate passed with `--extern`
= help: use `::open` to refer to this crate unambiguously
note: `open` could also refer to the module defined here
--> /home/antoine/.cargo/registry/src/index.crates.io-6f17d22bba15001f/nu-command-0.88.0/src/stor/mod.rs:12:1
|
12 | mod open;
| ^^^^^^^^^
= help: use `self::open` to refer to this module unambiguously
Compiling nu-cli v0.88.0
Compiling nu-lsp v0.88.0
For more information about this error, try `rustc --explain E0659`.
error: could not compile `nu-command` (lib) due to previous error
warning: build failed, waiting for other jobs to finish...
error: failed to compile `nu v0.88.0`, intermediate artifacts can be found at `/tmp/cargo-installEUsfIr`
```
# User-Facing Changes
No user-facing changes.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
this will allow to run
```nushell
format date --list | get 0
```
and get
```
─────────────┬───────────────────────────────────────────────────────────
Specification│%Y
Example │2023
Description │The full proleptic Gregorian year, zero-padded to 4 digits.
─────────────┴───────────────────────────────────────────────────────────
```
instead of currently
```
Error: nu::parser::input_type_mismatch
× Command does not support string input.
╭─[entry #2:1:1]
1 │ format date --list | get 0
· ─┬─
· ╰── command doesn't support string input
╰────
```
# Description
This repeats #8268 to make all command usage strings start with an
uppercase letter and end with a period per #5056
Adds a test to ensure that commands won't regress
Part of #5066
# User-Facing Changes
Command usage is now consistent
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Automatic documentation updates
# Description
This PR uses the `crossterm` api to reimplement `clear` command, since
`crossterm` is cross-platform.
This seems to work on linux and windows.
# User-Facing Changes
N/A
# Tests + Formatting
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# After Submitting
N/A
# Description
This PR addresses #11204 which points out that using a closure for the
replacement value with `update`, `insert`, or `upsert` does not work for
lists.
# User-Facing Changes
- Replacement closures should now work for lists in `upsert`, `insert`,
and `update`. E.g., `[0] | update 0 {|i| $i + 1 }` now gives `[1]`
instead of an unhelpful error.
- `[1 2] | insert 4 20` no longer works. Before, this would give `[1, 2,
null, null, 20]`, but now it gives an error. This was done to match the
intended behavior in `Value::insert_data_at_cell_path`, whereas the
behavior before was probably unintentional. Following
`Value::insert_data_at_cell_path`, inserting at the end of a list is
also fine, so the valid indices for `upsert` and `insert` are
`0..=length` just like `Vec::insert` or list inserts in other languages.
# Tests + Formatting
Added tests for `upsert`, `insert`, and `update`:
- Replacement closures for lists, list streams, records, and tables
- Other list stream tests
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Hi! I was playing around and I fixed the formatting in the LSP hover.
I _only tested in VS Code using Windows_, if anyone is capable, can you
test it on nvim or linux if it works properly? I think markdown
shouldn't have any problem
The link of the LSP meta issue just for reference #10941
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
Now the LSP hovers markdown properly
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The `spam` command is provided by
[opensp](https://openjade.sourceforge.net/) which causes
`overlay_use_main_not_exported` to hang. `opensp` is pulled by
`gnome-control-center` on my system.
[opensp package
list](https://archlinux.org/packages/extra/x86_64/opensp/files/)
```
opensp 1.5.2-10 File List
Package has 224 files and 14 directories.
[Back to Package](https://archlinux.org/packages/extra/x86_64/opensp/)
usr/
usr/bin/
usr/bin/nsgmls
usr/bin/onsgmls
usr/bin/osgmlnorm
usr/bin/ospam
usr/bin/ospcat
usr/bin/ospent
usr/bin/osx
usr/bin/sgml2xml
usr/bin/sgmlnorm
usr/bin/spam
...snip...
```
`cargo test` output
```
...snip...
test shell::pipeline::commands::internal::unlet_variable_in_parent_scope ... ok
test shell::pipeline::commands::internal::unlet_env_variable ... ok
test shell::pipeline::doesnt_break_on_utf8 ... ok
test shell::run_export_extern ... ok
test shell::run_script_that_looks_like_module ... ok
test shell::pipeline::commands::internal::can_process_one_row_from_internal_and_pipes_it_to_stdin_of_external ... ok
test shell::pipeline::commands::internal::variable_scoping::access_variables_in_scopes ... ok
test shell::run_in_login_mode ... ok
test shell::run_in_interactive_mode ... ok
test shell::run_in_noninteractive_mode ... ok
test shell::run_in_not_login_mode ... ok
test shell::pipeline::commands::internal::subexpression_properly_redirects ... ok
test shell::pipeline::commands::internal::subexpression_handles_dot ... ok
test shell::pipeline::commands::internal::takes_rows_of_nu_value_strings_and_pipes_it_to_stdin_of_external ... ok
test overlays::overlay_use_main_not_exported has been running for over 60 seconds
```
# User-Facing Changes
N/A
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# After Submitting
N/A
# Description
This PR is kind of two PRs in one because they were dependent on each
other.
PR1 -
3de58d4dc2
with update
7fcdb242d9
- This follows our mantra of having everything with defaults written in
nushell rust code. So, that if you run without a config, you get the
same behavior as with the default config/env files. This sets
NU_LIB_DIRS to $nu.config-path/scripts and sets NU_PLUGIN_DIRS to
$nu.config-path/plugins.
PR2 -
0e8ac876fd
- The benchmarks have been broke for some time and we didn't notice it.
This PR fixes that. It's dependent on PR1 because it was throwing errors
because PWD needed to be set to a valid folder and `$nu` did not exist
based on how the benchmark was setup.
I've tested the benchmarks and they run without error now and I've also
launched nushell as `nu -n --no-std-lib` and the env vars exist.
closes#11236
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Replace `.to_string()` used in `GenericError` with `.into()` as
`.into()` seems more popular
Replace `Vec::new()` used in `GenericError` with `vec![]` as `vec![]`
seems more popular
(There are so, so many)
Allow `++=` to work in all situations `++` does, namely for appending
single elements: `$list ++= 1`.
Resolve#11087
# Description
Bring `++=` to parity with `++`.
# User-Facing Changes
It is now possible to do `$list ++= 1` (appending a single element).
Similarly, this can be done:
```Nushell
~> mut a = [1]
~> $a ++= 2
~> a
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
╰───┴───╯
```
# Tests + Formatting
Added two tests:
- `commands::assignment::append_assign::append_assign_single_element`
- `commands::assignment::append_assign::append_assign_to_single_element`
related to
-
https://github.com/nushell/nushell/issues/10676#issuecomment-1842472941
from @suimong
# Description
the command in the `README.md` of `nu-std` should use `scope commands`
instead of `help commands`, which return an empty list.
# User-Facing Changes
# Tests + Formatting
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
It turns out that I left a bug in
[#11144](https://github.com/nushell/nushell/pull/11144/), which
introduced a spread operator in record literals. When highlighting
subexpressions that are spread inside records, the spread operator and
the token before it are insert twice. Currently, when you type `{ ...()
}`, this is what you'll see:
With the PR, the behavior is as expected:
I'm still not sure how `FlatShape` works, I just copied the existing
logic for flattening key-value pairs in records, so it's possible
there's still issues, but I haven't found any yet (tried spreading
subexpressions, variables, and records).
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Highlighting for subexpressions spread inside records should no longer
be screwed up.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Is there any way to test flattening/syntax highlighting?
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #11143
# User-Facing Changes
Take the following as example:
```nushell
module foo { export def bar [] {}; export def baz [] {} }
```
`use foo bar baz` will be error:
```
❯ use foo c d
Error: nu::parser::wrong_import_pattern
× Wrong import pattern structure.
╭─[entry #2:1:1]
1 │ use foo c d
· ┬
· ╰── Trying to import something but the parent `c` is not a module, maybe you want to try `use <module> [<name1>, <name2>]`
╰────
```
# Tests + Formatting
Done
# Description
This PR changes the way we handled non-zero exit codes to be and early
exit between `foo; bar`. If `foo` in the example has a non-zero exit
code, `bar` wouldn't be run.
This also affects subexpressions.
Bumps
[actions-rust-lang/setup-rust-toolchain](https://github.com/actions-rust-lang/setup-rust-toolchain)
from 1.5.0 to 1.6.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/blob/main/CHANGELOG.md">actions-rust-lang/setup-rust-toolchain's
changelog</a>.</em></p>
<blockquote>
<h2>[1.6.0] - 2023-12-04</h2>
<h3>Added</h3>
<ul>
<li>Allow disabling problem matchers (<a
href="https://redirect.github.com/actions-rust-lang/setup-rust-toolchain/issues/27">#27</a>)
This can be useful when having a matrix of jobs, that produce the same
errors.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="c7e1de2846"><code>c7e1de2</code></a>
Update CHANGELOG.md</li>
<li><a
href="24c9dd087b"><code>24c9dd0</code></a>
Merge pull request <a
href="https://redirect.github.com/actions-rust-lang/setup-rust-toolchain/issues/24">#24</a>
from obi1kenobi/patch-1</li>
<li><a
href="74a4154991"><code>74a4154</code></a>
Merge pull request <a
href="https://redirect.github.com/actions-rust-lang/setup-rust-toolchain/issues/27">#27</a>
from oxideai/feature/config-matcher</li>
<li><a
href="84ba0c9d1b"><code>84ba0c9</code></a>
Update README</li>
<li><a
href="51173b3da4"><code>51173b3</code></a>
feature(matcher): allow disabling problem matcher</li>
<li><a
href="33678a48c0"><code>33678a4</code></a>
Add docs for the <code>cachekey</code> output to the README</li>
<li><a
href="317ed62323"><code>317ed62</code></a>
Update example workflow in readme</li>
<li><a
href="8cb8f77172"><code>8cb8f77</code></a>
Merge pull request <a
href="https://redirect.github.com/actions-rust-lang/setup-rust-toolchain/issues/23">#23</a>
from actions-rust-lang/dependabot/github_actions/actio...</li>
<li><a
href="1f541c5b05"><code>1f541c5</code></a>
Bump actions/checkout from 3 to 4</li>
<li>See full diff in <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/compare/v1.5.0...v1.6.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Trying to call `metadata $env` or `metadata $nu` will throw an error:
```Nushell
~> metadata $nu
Error: × Built-in variables `$env` and `$nu` have no metadata
╭─[entry #1:1:1]
1 │ metadata $nu
· ─┬─
· ╰── no metadata available
╰────
```
# Description
This PR adds an explicit indication for duplicate flags, which helps
with debugging.
# User-Facing Changes
N/A
# Tests + Formatting
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# After Submitting
N/A
# Description
This PR adds checks for ports. This fixes unexpected output similar to
the one in the comment
https://github.com/nushell/nushell/pull/11210#issuecomment-1837152357.
* before
```console
/data/source/nushell> port 65536 99999
41233
```
* after
```console
/data/source/nushell> port 65536 99999
Error: nu:🐚:cant_convert
× Can't convert to u16.
╭─[entry #1:1:1]
1 │ port 65536 99999
· ──┬──
· ╰── can't convert usize to u16
╰────
help: out of range integral type conversion attempted (min: 0, max: 65535)
```
# User-Facing Changes
N/A
# Tests + Formatting
* [x] add `port_out_of_range` test
# After Submitting
N/A
closes#11059
# Description
I'm not sure what the consensus was after discussing this in discord, so
I'm creating a PR as suggested
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
TBD
# Tests + Formatting
TBD
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
TBD
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Without this change, projects which depend on both nu-command and
rust_decimal's "rkyv" feature cause nu-command to fail to compile.
```toml
[dependencies]
nu-command = { path = "../nushell/crates/nu-command" }
rust_decimal = { version = "1", features = ["rkyv"] }
```
```console
error[E0277]: can't compare `std::option::Option<&str>` with `std::option::Option<&std::string::String>`
--> nushell/crates/nu-command/src/filters/join.rs:367:35
|
367 | let k_shared = shared_key == Some(k);
| ^^ no implementation for `std::option::Option<&str> == std::option::Option<&std::string::String>`
|
= help: the trait `PartialEq<std::option::Option<&std::string::String>>` is not implemented for `std::option::Option<&str>`
= help: the following other types implement trait `PartialEq<Rhs>`:
<std::option::Option<Box<U>> as PartialEq<rkyv::niche::option_box::ArchivedOptionBox<T>>>
<std::option::Option<T> as PartialEq>
<std::option::Option<U> as PartialEq<rkyv::option::ArchivedOption<T>>>
For more information about this error, try `rustc --explain E0277`.
warning: `nu-command` (lib) generated 1 warning
error: could not compile `nu-command` (lib) due to previous error; 1 warning emitted
```
# Description
Fixes issue #11212 where only the first cellpath supplied to `get -i` is
treated as optional, and the rest of the cell paths are treated as
non-optional.
# Tests
Added one test.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Try to fix capacity overflow caused by large range of ports.
```
$ port 1024 999999999999999999 12/02/23 20:03:14 PM
thread 'main' panicked at 'capacity overflow', library/alloc/src/raw_vec.rs:524:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Try to improve the error message of invalid range.
* before
* after
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
this PR deprecates the `std testing` module in favor of Nupm.
the plan is to simply hide the module to the user but still use it
internally when running the tests so that
- users don't start to use this module and rather focus on Nupm
- devs don't have to install anything to run the tests locally, they can
just use `toolkit test stdlib` for instance
the deprecation message will be very similar to
https://github.com/nushell/nushell/pull/11097
> **Note**
> to demonstrate that the removal of such a command from the exposed
modules of `std` will be transparent and not require the user to install
anything, i have it [prepared in a branch based on this
PR](https://github.com/amtoine/nushell/compare/deprecate-std-testing...amtoine:nushell:hide-std-testing)
> running `toolkit test stdlib` will run the standard library tests
without an issue and yet `use std testing` won't work 👌
# User-Facing Changes
`std testing run-tests` will be removed in `0.90`
# Tests + Formatting
# After Submitting
this should
- close https://github.com/nushell/nushell/issues/11134
# Description
this is band-aid...
but it should address the issue in
https://github.com/nushell/nushell/issues/11134 until we have a better
long-term fix for this i/o types bug 😇
# User-Facing Changes
the following will now parse and run fine
```nushell
def get-initial-commit []: nothing -> string {
^git rev-list HEAD | lines | last
}
```
# Tests + Formatting
# After Submitting
`input list` now allows all types by using `into_string`.
Custom formatting logic for records was removed.
Allow ranges as an input types.
Also made the prompt check depend on option, so `input list ""` will
have an empty prompt, while `input list` does not.
Resolve#11181
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This is a continuation of #11190. Try to add `OutOfBounds` error. It
seems that `OutOfBounds` is more accurate than `InvalidRange`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is a PR to start adding a few tests to the `stor` commands. It
refactors the `stor create` command so it's easier to write tests.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #11153
To make sure scripts stop from running on non-zero exit code, we need to
invoke `might_consume_external_result` on
`PipelineData::ExternalStream`, so it can tell nushell if this command
exists with non-zero exit code.
And this pr also adjusts some test cases.
# User-Facing Changes
```nushell
^false out> /dev/null; print "ok"
```
After this pr, it shouldn't print ok.
# Tests + Formatting
Done
# Description
This PR implements modifications to command tests that write unnecessary
json and csv to disk then load it with open, by using nuon literals
instead.
- Fixes#7189
# User-Facing Changes
None
# Tests + Formatting
This only affects existing tests, which still pass.
Goes towards implementing #10598, which asks for a spread operator in
lists, in records, and when calling commands (continuation of #11006,
which only implements it in lists)
# Description
This PR is for adding a spread operator that can be used when building
records. Additional functionality can be added later.
Changes:
- Previously, the `Expr::Record` variant held `(Expression, Expression)`
pairs. It now holds instances of an enum `RecordItem` (the name isn't
amazing) that allows either a key-value mapping or a spread operator.
- `...` will be treated as the spread operator when it appears before
`$`, `{`, or `(` inside records (no whitespace allowed in between) (not
implemented yet)
- The error message for duplicate columns now includes the column name
itself, because if two spread records are involved in such an error, you
can't tell which field was duplicated from the spans alone
`...` will still be treated as a normal string outside records, and even
in records, it is not treated as a spread operator when not followed
immediately by a `$`, `{`, or `(`.
# User-Facing Changes
Users will be able to use `...` when building records.
```
> let rec = { x: 1, ...{ a: 2 } }
> $rec
╭───┬───╮
│ x │ 1 │
│ a │ 2 │
╰───┴───╯
> { foo: bar, ...$rec, baz: blah }
╭─────┬──────╮
│ foo │ bar │
│ x │ 1 │
│ a │ 2 │
│ baz │ blah │
╰─────┴──────╯
```
If you want to update a field of a record, you'll have to use `merge`
instead:
```
> { ...$rec, x: 5 }
Error: nu:🐚:column_defined_twice
× Record field or table column used twice: x
╭─[entry #2:1:1]
1 │ { ...$rec, x: 5 }
· ──┬─ ┬
· │ ╰── field redefined here
· ╰── field first defined here
╰────
> $rec | merge { x: 5 }
╭───┬───╮
│ x │ 5 │
│ a │ 2 │
╰───┴───╯
```
# Tests + Formatting
# After Submitting
Works for all arguments and flags. Because the signature parsing doesn't
give the spans, it is flags the entire signature.
Also added a constant with reserved variable names.
Fix#11158.
Reverts nushell/nushell#10943
The current implementation of `arr_to_value` is unsound, as it allows
casts of arbitrary data to arbitrary types without being marked
`unsafe`.
The full safety requirements to perform both the cast and the following
unchecked access are not as clear that a simple change of `fn
arr_to_value` to `unsafe fn arr_to_value` could be blessed without
further investigation.
cc @ayax79
# Description
Convert these ShellError variants to named fields:
* CreateNotPossible
* MoveNotPossibleSingle
* DirectoryNotFoundCustom
* DirectoryNotFound
* NotADirectory
* OutOfMemoryError
* PermissionDeniedError
* IOErrorSpanned
* IOError
* IOInterrupted
Also place the `span` field of `DirectoryNotFound` last to match other
errors.
Part of #10700 (almost half done!)
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
We have seen some test cases which requires to output message to both
stdout and stderr, especially in redirection scenario.
This pr is going to introduce a new echo_env_mixed testbin, so we can
have less tests which only runs on windows.
# User-Facing Changes
NaN
# Tests + Formatting
NaN
# After Submitting
NaN
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This PR preserves metadata when running some filters. As discussed on
discord that helps when running for example `ls | reject modified`
because it keeps colouring and links.
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Close: #10278
This pr introduces `o>>`, `e>>`, `o+e>>` to allow redirection to append
to a file.
Examples:
```nushell
echo abc o>> a.txt
echo abc o>> a.txt
cat asdf e>> a.txt
cat asdf e>> a.txt
cat asdf o+e>> a.txt
```
~~TODO:~~
~~1. currently internal commands with `o+e>` redirect to a variable is
broken: `let x = "a.txt"; echo abc o+e> $x`, not sure when it was
introduced...~~
~~2. redirect stdout and stderr with append mode doesn't supported yet:
`cat asdf o>>a.txt e>>b.ext`~~
~~For these 2 items, I'd like to fix them in different prs.~~
Already done in this pr
# Description
This PR addresses issue with cp brough up on
[discord](https://discord.com/channels/601130461678272522/614593951969574961/1177669443917189130)
where target of cp is not correctly expanded.
If one has directory `test` with file `file.txt` in it then the
following command (in one line or inside a `do` block):
```nu
cd test; let file = 'copy.txt'; cp file.txt $file
```
will create a `copy.txt` in `.` not in `test` instead. This happens
because target of `cp` is a variable which is not expanded unlike a
string literal
# User-Facing Changes
`cp` will correctly parse realative target paths
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR enables a new feature that shows which externals are found in
your path via the syntax highlighter as you type.
This idea could use some improvement where it caches the items in your
path and on some trigger, expires that cache and creates a new on. Right
now, all it does is call the `which` crate on every character you type.
This could be problematic if you have hundreds of paths in your PATH or
if some of your paths in your Path point to extraordinarily slow file
systems. WSL pointing to Windows comes to mind. Either way, I've thrown
it up here for people to try and provide feedback. I think the novelty
of showing what is valid and what isn't is pretty cool. I believe
fish-shell also does this, IIRC.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Added statement catching early List passed to CSV and printing more
helpful error message. This fixes#10081. Similar message might be
useful for other from_* calls but I'm not sure if there aren't any
converters accepting List as input.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fix release and nightly build workflow:
https://github.com/nushell/nightly/issues/15
I think the `mv` command in v0.87.1 still has some bugs, when downgrade
to v0.86 everything works as expected
# Description
Fixes: #10271
Given the following script:
```shell
# test.sh
echo aaaaa
echo bbbbb 1>&2
echo cc
```
This pr makes the following command possible:
```nushell
bash test.sh err> /dev/null | lines | each {|line| $line | str length}
```
## General idea behind the change:
When nushell redirect stderr message to external file
1. it take stdout of external stream, and pass this stream to next
command, so it won't block next pipeline command from running.
2. relative stderr stream are handled by `save` command
These two streams are handled separately, so we need to delegate a
thread to `save` command, or else we'll have a chance to hang nushell,
we have meet a similar before: #5625.
### One case to consider
What if we're failed to save to an external stream? (Like we don't have
a permission to save to a file)?
In this case nushell will just print a waning message, and don't stop
the following scripts from running.
# User-Facing Changes
## Before
```nushell
❯ bash test2.sh err> /dev/null | lines | each {|line| $line | str length}
aaaaa
cc
```
## After
```nushell
❯ bash test2.sh err> /dev/null | lines | each {|line| $line | str length}
╭───┬───╮
│ 0 │ 5 │
│ 1 │ 2 │
╰───┴───╯
```
BTY, after this pr, the following commands are impossible either, it's
important to make sure that the implementation doesn't introduce too
much costs:
```nushell
❯ echo a e> a.txt e> a.txt
Error: × Can't make stderr redirection twice
╭─[entry #1:1:1]
1 │ echo a e> a.txt e> a.txt
· ─┬
· ╰── try to remove one
╰────
❯ echo a o> a.txt o> a.txt
Error: × Can't make stdout redirection twice
╭─[entry #2:1:1]
1 │ echo a o> a.txt o> a.txt
· ─┬
· ╰── try to remove one
╰────
```
# Description
Closes: #7260
About the change:
When we make an internalcall, and meet a `switch` (Flag.arg is None),
nushell will try to see if the switch is called like `--xyz=false` , if
that is true, `parse_long_flag` will return relative value.
# User-Facing Changes
So after the pr, the following would be possible:
```nushell
def build-imp [--push, --release] {
echo $"Doing a build with push: ($push) and release: ($release)"
}
def build [--push, --release] {
build-imp --push=$push --release=$release
}
build --push --release=false
build --push=false --release=true
build --push=false --release=false
build --push --release
build
```
# Tests + Formatting
Done
# After Submitting
Needs to submit a doc update, mentioned about the difference between
`def a [--x] {}` and `def a [--x: bool] {}`
# Description
Further work towards the goal that we can make `Record`'s field private
and experiment with different internal representations
## Details
- Use inplace record iter in `nu-command/math/utils`
- Guarantee that existing allocation can be reused
- Use proper record iterators in `path join`
- Remove unnecesary hashmap in `path join`
- Should minimally reduce the overhead
- Unzip records in `nu-command`
- Refactor `query web` plugin to use record APIs
- Use `Record::into_values` for `values` command
- Use `Record::columns()` in `join` instead.
- Potential minor pessimisation
- Not the hot value path
- Use sane `Record` iters in example `Debug` impl
- Avoid layout assumption in `nu-cmd-extra/roll/mod`
- Potential minor pessimisation
- relegated to `extra`, changing the representation may otherwise break
this op.
- Use record api in `rotate`
- Minor risk that this surfaces some existing invalid behavior as panics
as we now validate column/value lengths
- `extra` so things are unstable
- Remove unnecessary references in `rotate`
- Bonus cleanup
# User-Facing Changes
None functional, minor potential differences in runtime. You win some,
you lose some.
# Tests + Formatting
Relying on existing tests
# Description
I'm not sure if "is-terminal" is the best name for this command as there
is also "term size". Uses
[`is_terminal()`](https://doc.rust-lang.org/stable/std/io/trait.IsTerminal.html#tymethod.is_terminal)
which is cross-platform.
Possible alternative names:
* `term is-tty --stdout`
* `term is-tty stdout`
* `term is-terminal stdout`
If multiple streams are provided an error is returned. The error span
covers all arguments as the incompatible one is not known. This may be
new?
Fixes#10517
# User-Facing Changes
* Add `is-terminal` to check if stdin, stdout, or stderr are a terminal
(TTY)
# Tests + Formatting
The nu tests always redirect stdin, stdout, and stderr so a positive
test case is not possible without extra work
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
The new command will be added automatically
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
This is still work in progress. But let's start somewhere.
Goal for this being in the repo is to make sure we update it more
frequently than the
https://github.com/nushell/nushell.github.io/tree/main/contributor-book
- Add folder for in-repo developer documentation
- Move PLATFORM_SUPPORT into devdocs
- Move our rust style to devdocs
- Use nushell code formatting in CONTRIBUTING
- Add FAQ file for developers with example questions
- Describe error handling best practices
# Description
`ShellError::FlagNotFound` had a note that said it may be removable so
this PR removes it instead of updating it to named fields per #10700
I can't see this error being used since it was introduced with #4364. I
can't find why or where it was used before that date, though. There was
a large merge with that PR but I can't penetrate the secrets of git to
find out where its earlier history went.
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Fix the breaking changes.
Get's rid of some outdated transitive dependencies.
Sadly we need to expose more of `procfs` to `nu-command` based on how
the features of `nu-system` are exposed right now.
Conditional compilation/dependencies from hell included
Supersedes #11101
# Description
Slightly refactors the cell path functions (`insert_data_at_cell_path`,
etc.) for `Value` to fix a few bugs and ensure consistent behavior.
Namely, case (in)sensitivity now applies to lazy records just like it
does for regular `Records`. Also, the insert behavior of `insert` and
`upsert` now match, alongside fixing a few related bugs described below.
Otherwise, a few places were changed to use the `Record` API.
# Tests
Added tests for two bugs:
- `{a: {}} | insert a.b.c 0`: before this PR, doesn't create the
innermost record `c`.
- `{table: [[col]; [{a: 1}], [{a: 1}]]} | insert table.col.b 2`: before
this PR, doesn't add the field `b: 2` to each row.
# Description
These make it easy to make a Span that covers an entire argument and the
span of all arguments in a Call.
Call::arguments_span() is useful for errors where a command may accept
arguments or the pipeline, but not both.
Argument::span() is useful for errors where an arguments is incompatible
with one or more other arguments.
In particular, I wish to use this to create an error for an
implementation of #9563 that either allows arguments to set limits:
```nushell
limits set RLIMIT_NOFILE --soft 255 --hard 1024
```
Or pipeline:
```nushell
{name: RLIMIT_NOFILE, soft: 255} | limits set
```
But not both:
```
❯ [{name: RLIMIT_NOFILE, soft: 255, hard: 1024}] | limits set AS --soft 5 --hard 5
Error: nu:🐚:incompatible_parameters
× Incompatible parameters.
╭─[source:1:1]
1 │ [{name: RLIMIT_NOFILE, soft: 255, hard: 1024}] | limits set AS --soft 5 --hard 5
· ───────────────────────┬────────────────────── ──────────┬─────────
· │ ╰── or arguments, not both
· ╰── Supply either pipeline
╰────
```
# User-Facing Changes
Only nushell Command API changes
follow-up to
- https://github.com/nushell/nushell/pull/10715
> **Important**
> wait for between 0.87 and 0.88 to land this
# Description
it's time for removal again 😋
this PR removes `def-env` and `export def-env` in favor of `def --env`
# User-Facing Changes
`def-env` and `export def-env` will not be found anymore.
# Tests + Formatting
# After Submitting
closes#10845
I've opened this a little prematurely to get some questions answered
before I cleanup the code.
As I started trying to better understand GNUs `mktemp` I've realized its
kind of peculiar and we might want to change its behavior to introduce
it to nushell.
#### quiet and dry run
Does it make sense to keep the `quiet` and `dry_run` flags? I don't
think so. The GNU documentation says this about the dry run flag "Using
the output of this command to create a new file is inherently unsafe, as
there is a window of time between generating the name and using it where
another process can create an object by the same name." So yeah why keep
it? As far as quiet goes, does it make sense to silence the errors in
nushell?
#### other confusing flags
According to the [gnu
docs](https://www.gnu.org/software/coreutils/manual/html_node/mktemp-invocation.html),
the `-t` flag is deprecated and the `-p`/ `--tempdir` are the same flag
with the only difference being `--tempdir` takes an optional path, Given
that, I've broken the `-p` away from `--tempdir`. Now there is one
switch `--tmpdir`/`-t` and one named param `--tmpdir-path`/`-p`.
GNU mktemp
```
-p DIR, --tmpdir[=DIR] interpret TEMPLATE relative to DIR; if DIR is not
specified, use $TMPDIR if set, else /tmp. With
this option, TEMPLATE must not be an absolute name;
unlike with -t, TEMPLATE may contain slashes, but
mktemp creates only the final component
-t interpret TEMPLATE as a single file name component,
relative to a directory: $TMPDIR, if set; else the
directory specified via -p; else /tmp [deprecated]
```
to
nushell mktemp
```
-p, --tmpdir-path <Filepath> # named param, must provide a path
-t, --tmpdir # a switch
```
Is this a terrible idea?
What should I do?
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Clippy fixes for rust 1.76.0-nightly
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes issue #11061 where `rm` fails to find a file after a `cd`. It
looks like the new glob functions do not return absolute file paths
which we forgot to account for.
# Tests
Added a test (fails on current main, but passes with this PR).
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
follow-up to:
- https://github.com/nushell/nushell/pull/10771
> **Important**
> wait for between 0.87 and 0.88 to land this
# Description
after deprecation comes the removal... this PR removes `unfold` in favor
of `generate` 🥳
# User-Facing Changes
users should use `generate` now, `unfold` will stop working.
# Tests + Formatting
# After Submitting
follow-up to
- https://github.com/nushell/nushell/pull/10798
> **Important**
> wait for between 0.87 and 0.88 to land this
# Description
once again, after deprecation comes removal 😌
# User-Facing Changes
`size` is now removed and `str size` should be used
# Tests + Formatting
# After Submitting
follow-up to
- https://github.com/nushell/nushell/pull/10827
> **Important**
> wait for between 0.87 and 0.88 to land this
# Description
after deprecation comes removal... this PR removes `glob --not` in favor
of `glob --exclude`.
# User-Facing Changes
`glob --not` will stop working.
# Tests + Formatting
# After Submitting
i didn't find any use of `glob --not` in the `nu_scripts` so no update
required there 👍
follow-up to
- https://github.com/nushell/nushell/pull/10716
> **Important**
> wait for between 0.87 and 0.88 to land this
# Description
it's time for removal again 😋
this PR removes `extern-wrapped` and `export extern-wrapped` in favor of
`def --wrapped`
# User-Facing Changes
`extern-wrapped` and `export extern-wrapped` will not be found anymore.
# Tests + Formatting
# After Submitting
# Description
This PR follows our process of staying 2 releases behind rust. 1.74.0
was released today so we update to 1.72.1.
Reference https://releases.rs/
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
# Description
@sholderbach pointed out some places that I could help improve the code
in the table command changes. This PR tries to implement those.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Correct an example that had old syntax.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes a minor bug that prevented this command from running.
```nushell
table --list | each {|r| print ($r); print (ls | first 3 | table --theme $r)}
```
Here's the output now of the first few themes.
It prevented it from running because "default" wasn't a real table
theme. Now "default" is a synonym of rounded.
Also tweaked the error message when a bad theme name is provided.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR just tweaks the `table` example text and some parameter text.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The `into binary` command has a `-c` flag which strips any leading 0s in
the most significant digits to represent the minimal number of bytes,
rather than the system's complete in-memory representation of the input.
However, currently giving 0 as input results in eight 0 bytes even with
the `-c` flag, which is inconsistent with the purpose of the flag.
```nu
❯ : 345678 | into binary
Length: 8 (0x8) bytes | printable whitespace ascii_other non_ascii
00000000: 4e 46 05 00 00 00 00 00 NF•00000
❯ : 345678 | into binary -c
Length: 3 (0x3) bytes | printable whitespace ascii_other non_ascii
00000000: 4e 46 05
❯ : 0 | into binary
Length: 8 (0x8) bytes | printable whitespace ascii_other non_ascii
00000000: 00 00 00 00 00 00 00 00 00000000
❯ : 0 | into binary -c
Length: 8 (0x8) bytes | printable whitespace ascii_other non_ascii
00000000: 00 00 00 00 00 00 00 00 00000000
```
This change fixes this behavior so that if the entire input results in
all 0 bytes, only a single 0 byte is returned.
```nu
❯ : ~/src/nushell/target/aarch64-linux-android/debug/nu -c '0 | into binar
y -c'
Length: 1 (0x1) bytes | printable whitespace ascii_other non_ascii
00000000: 00
```
# User-Facing Changes
Values which result in all null bytes will be truncated to a single byte
when `-c` is given. This could potentially be considered a breaking
change if this behavior was relied upon in some way.
# Description
This PR adds the ability to parse human readable datetime strings as
part of the `into datetime` command. I added a new `-n`/`--list-human`
parameter that produces this list to give the user an idea of what is
supported.
```nushell
❯ into datetime --list-human
╭#─┬parseable human datetime examples┬───result───╮
│0 │Today 18:30 │in 8 hours │
│1 │2022-11-07 13:25:30 │a year ago │
│2 │15:20 Friday │in 3 days │
│3 │This Friday 17:00 │in 3 days │
│4 │13:25, Next Tuesday │in a week │
│5 │Last Friday at 19:45 │3 days ago │
│6 │In 3 days │in 2 days │
│7 │In 2 hours │in 2 hours │
│8 │10 hours and 5 minutes ago │10 hours ago│
│9 │1 years ago │a year ago │
│10│A year ago │a year ago │
│11│A month ago │a month ago │
│12│A week ago │a week ago │
│13│A day ago │a day ago │
│14│An hour ago │an hour ago │
│15│A minute ago │a minute ago│
│16│A second ago │now │
│17│Now │now │
╰#─┴parseable human datetime examples┴───result───╯
```
Or with `$env.config.datetime_format.table` set.
```nushell
❯ into datetime --list-human
╭#─┬parseable human datetime examples┬──────result───────╮
│0 │Today 18:30 │11/14/23 06:30:00PM│
│1 │2022-11-07 13:25:30 │11/07/22 01:25:30PM│
│2 │15:20 Friday │11/17/23 03:20:00PM│
│3 │This Friday 17:00 │11/17/23 05:00:00PM│
│4 │13:25, Next Tuesday │11/21/23 01:25:00PM│
│5 │Last Friday at 19:45 │11/10/23 07:45:00PM│
│6 │In 3 days │11/17/23 10:12:54AM│
│7 │In 2 hours │11/14/23 12:12:54PM│
│8 │10 hours and 5 minutes ago │11/14/23 12:07:54AM│
│9 │1 years ago │11/13/22 10:12:54AM│
│10│A year ago │11/13/22 10:12:54AM│
│11│A month ago │10/15/23 11:12:54AM│
│12│A week ago │11/07/23 10:12:54AM│
│13│A day ago │11/13/23 10:12:54AM│
│14│An hour ago │11/14/23 09:12:54AM│
│15│A minute ago │11/14/23 10:11:54AM│
│16│A second ago │11/14/23 10:12:53AM│
│17│Now │11/14/23 10:12:54AM│
╰#─┴parseable human datetime examples┴──────result───────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR makes a couple of tweaks to the testing support crate:
Add the `nu` invocation's exit status to the test output so that one
can assert that nu exited with a successful code.
This PR was split off of #10232.
Go from the ill-defined `enable/disable` pairs to `.use_...` builders
This alleviates unclear properties when the underlying enhancements are
enabled. Now they are enabed when entering `Reedline::read_line` and
disabled when exiting that.
Furthermore allow setting `$env.config.use_kitty_protocol` to have an
effect when toggling during runtime. Previously it was only enabled when
receiving a value from `config.nu`. I kept the warning code there to not
pollute the log. We could move it into the REPL-loop if desired
Not sure if we should actively block the enabling of `bracketed_paste`
on Windows. Need to test what happens if it just doesn't do anything we
could remove the `cfg!` switch. At least for WSL2 Windows Terminal
already supports bracketed paste. `target_os = windows` is a bad
predictor for `conhost.exe`.
Depends on https://github.com/nushell/reedline/pull/659
(pointing to personal fork)
Closes https://github.com/nushell/nushell/issues/10982
Supersedes https://github.com/nushell/nushell/pull/10998
# Description
Fixes: #11033
Sorry for the issue, it's a regression which introduce by this pr:
#10456.
And this pr is going to fix it.
About the change: create a new field named `type_annotated` for
`Arg::Flag` and `Arg::Signature` instead of `arg_explicit_type`
variable.
When we meet a type in `TypeMode`, we set `type_annotated` field of the
argument to be true, then we know that if the arg have a annotated type
easily
We have three different `rustix` minor versions. For two of them with
their previous patch versions a security advisory has been released:
https://github.com/advisories/GHSA-c827-hfw6-qwvm
Bump the patch versions, to resolve the potential vulnerability.
At the moment we haven't assessed the potential impact on nushell,
whether we are exposed to the underlying issue.
The `color-backtrace` crate does not seem to either handle the terminal
modes well or operate in a way that the unwinding has not yet succeeded
to reach the backup disablement of the terminal raw mode in
`reedline::Reedline`'s `Drop` implementation.
This reverts commit d838871063.
Fixes#11029
This pull request fixes the tests for the `cargo.exe check` command. The
tests were failing due `cargo check -h` sometimes reporting `cargo.exe`
as the binary and thus not containing `cargo check` in the output.
The fix involves using the `Command` module from the `std::process`
library to run the command and comparing its output to the expected
output. No changes were made to the codebase itself.
# Description
Refactors the `flatten` command to remove a bunch of cloning. This was
down by passing ownership of the `Value` to `flat_value`, removing the
lifetime on `TableInside`, and using `Vec<Record>` in `FlattenedRows`
instead of a pair of `Vec` of columns and values.
For the quick benchmark below, it seems to be twice as fast now:
```nushell
let data = ls crates | where type == dir | each { ls $'($in.name)/**/*' }
timeit { for x in 0..1000 { $data | flatten } }
```
This took 550ms on v0.86.0 and only 230ms on this PR.
But considering that
```nushell
timeit { for x in 0..1000 { $data } }
```
takes 200ms on both versions, then the difference for `flatten` itself
is really 250ms vs 30ms -- 8x faster.
Provides support for reading Polars structs. This allows opening of
supported files (jsonl, parquet, etc) that contain rows with structured
data.
The following attached json lines
file([receipts.jsonl.gz](https://github.com/nushell/nushell/files/13311476/receipts.jsonl.gz))
contains a customer column with structured data. This json lines file
can now be loaded via `dfr open` and will render as follows:
<img width="525" alt="Screenshot 2023-11-09 at 10 09 18"
src="https://github.com/nushell/nushell/assets/56345/4b26ccdc-c230-43ae-a8d5-8af88a1b72de">
This also addresses some cleanup of date handling and utilizing
timezones where provided.
This pull request only addresses reading data from polars structs. I
will address converting nushell data to polars structs in a future
request as this change is large enough as it is.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
Generally elide a bunch of unnecessary clones. Both globally stopping to
clone the whole input data in a bunch of places where we need to read it
but also some minor places where we currently cloned.
As part of that, we can make the overwriting with `keep-all` and
`keep-last` inplace so the items don't need to be removed and repushed
to the record.
# Benchmarking
```nu
timeit { scope commands | transpose -r }
```
Before ~24 ms now just ~5 ms
# User-Facing Changes
This can change the order of apperance in the transposed record with
`--keep-last`/`--keep-all`. Now the
order is determined by the first appearance and not by the last
appearance in the ingoing columns.
This mirrors the behavior when not passed `keep-all` or `keep-last`.
# Tests + Formatting
Sadly the `transpose` command is so far undertested for more complex
operations.
# Description
I've had a few PRs fail clippy in CI after they pass `toolkit check pr`
because the clippy settings are different. This brings `toolkit.nu` into
alignment with CI and leaves notes to prompt future synchronization.
# User-Facing Changes
N/A
# Tests + Formatting
`cargo` output elided:
```
❯ toolkit check pr
running `toolkit fmt`
running `toolkit clippy`
running `toolkit clippy` on tests
running `toolkit clippy` on plugins
running `toolkit test`
running `toolkit test stdlib`
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
```
# After Submitting
N/A
# Description
This PR refactors `drop columns` and fixes issues #10902 and #6846.
Tables with "holes" are now handled consistently, although still
somewhat awkwardly. That is, the columns in the first row are used to
determine which columns to drop, meaning that the columns displayed all
the way to the right by `table` may not be the columns actually being
dropped. For example, `[{a: 1}, {b: 2}] | drop column` will drop column
`a` instead of `b`. Before, this would give a list of empty records.
# User-Facing Changes
`drop columns` can now take records as input.
# Description
Compatible with `Vec::truncate` and `indexmap::IndexMap::truncate`
Found useful in #10903 for `drop column`
# Tests + Formatting
Doctest with the relevant edge-cases
# Description
Add an extension trait `IgnoreCaseExt` to nu_utils which adds some case
insensitivity helpers, and use them throughout nu to improve the
handling of case insensitivity. Proper case folding is done via unicase,
which is already a dependency via mime_guess from nu-command.
In actuality a lot of code still does `to_lowercase`, because unicase
only provides immediate comparison and doesn't expose a `to_folded_case`
yet. And since we do a lot of `contains`/`starts_with`/`ends_with`, it's
not sufficient to just have `eq_ignore_case`. But if we get access in
the future, this makes us ready to use it with a change in one place.
Plus, it's clearer what the purpose is at the call site to call
`to_folded_case` instead of `to_lowercase` if it's exclusively for the
purpose of case insensitive comparison, even if it just does
`to_lowercase` still.
# User-Facing Changes
- Some commands that were supposed to be case insensitive remained only
insensitive to ASCII case (a-z), and now are case insensitive w.r.t.
non-ASCII characters as well.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Replaces the only usage of `Value::follow_cell_path_not_from_user_input`
with some `Record::get`s.
# User-Facing Changes
Breaking change for `nu-protocol`, since
`Value::follow_cell_path_not_from_user_input` was deleted.
Nushell now reports errors for when environment conversions are not
closures.
# Description
This is pretty complementary/orthogonal to @IanManske 's changes to
`Value` cellpath accessors in:
- #10925
- to a lesser extent #10926
## Steps
- Use `R.remove` in `Value.remove_data_at_cell_path`
- Pretty sound after #10875 (tests mentioned in commit message have been
removed by that)
- Update `did_you_mean` helper to use iterator
- Change `Value::columns` to return iterator
- This is not a place of honor
- Use `Record::get` in `Value::get_data_by_key`
# User-Facing Changes
None intentional, potential edge cases on duplicated columns could
change (considered undefined behavior)
# Tests + Formatting
(-)
Matches the general behavior of `Vec::drain` or
`indexmap::IndexMap::drain`:
- Drop the remaining elements (implementing the unstable `keep_rest()`
would not be compatible with something like `indexmap`)
- No `AsRef<[T]>` or `Drain::as_slice()` behavior as this would make
layout assumptions.
- `Drain: DoubleEndedIterator`
Found useful in #10903
# Description
Based of the work and discussion in #10844, this PR adds the `exec`
command for Windows. This is done by simply spawning a
`std::process::Command` and then immediately exiting via
`std::process::exit` once the child process is finished. The child
process's exit code is passed to `exit`.
# User-Facing Changes
The `exec` command is now available on Windows, and there should be no
change in behaviour for Unix systems.
# Description
Where appropriate, this PR replaces instances of
`Value::get_data_by_key` and `Value::follow_cell_path` with
`Record::get`. This avoids some unnecessary clones and simplifies the
code in some places.
Adds a special error, which is triggered by `alias foo=bar` style
commands. It adds a help string which recommends adding spaces.
Resolve#10958
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
# Description
Our config exists both as a `Config` struct for internal consumption and
as a `Value`. The latter is exposed through `$env.config` and can be
both set and read.
Thus we have a complex bug-prone mechanism, that reads a `Value` and
then tries to plug anything where the value is unrepresentable in
`Config` with the correct state from `Config`.
The parsing involves therefore mutation of the `Value` in a nested
`Record` structure. Previously this was wholy done manually, with
indices.
To enable deletion for example, things had to be iterated over from the
back. Also things were indexed in a bunch of places. This was hard to
read and an invitation for bugs.
With #10876 we can now use `Record::retain_mut` to traverse the records,
modify anything that needs fixing, and drop invalid fields.
# Parts:
- Error messages now consistently use the correct spans pointing to the
problematic value and the paths displayed in some messages are also
aligned with the keys used for lookup.
- Reconstruction of values has been fixed for:
- `table.padding`
- `buffer_editor`
- `hooks.command_not_found`
- `datetime_format` (partial solution)
- Fix validation of `table.padding` input so value is not set (and
underflows `usize` causing `table` to run forever with negative values)
- New proper types for settings. Fully validated enums instead of
strings:
- `config.edit_mode` -> `EditMode`
- Don't fall back to vi-mode on invalid string
- `config.table.mode` -> `TableMode`
- there is still a fall back to `rounded` if given an invalid
`TableMode` as argument to the `nu` binary
- `config.completions.algorithm` -> `CompletionAlgorithm`
- `config.error_style` -> `ErrorStyle`
- don't implicitly fall back to `fancy` when given an invalid value.
- This should also shrink the size of `Config` as instead of 4x24 bytes
those fields now need only 4x1 bytes in `Config`
- Completely removed macros relying on the scope of `Value::into_config`
so we can break it up into smaller parts in the future.
- Factored everything into smaller files with the types and helpers for
particular topics.
- `NuCursorShape` now explicitly expresses the `Inherit` setting.
conversion to option only happens at the interface to `reedline`
# Description
Since #10841 the goal is to remove the implementation details of
`Record` outside of core operations.
To this end use Record iterators and map-like accessors in a bunch of
places. In this PR I try to collect the boring cases where I don't
expect any dramatic performance impacts or don't have doubts about the
correctness afterwards
- Use checked record construction in `nu_plugin_example`
- Use `Record::into_iter` in `columns`
- Use `Record` iterators in `headers` cmd
- Use explicit record iterators in `split-by`
- Use `Record::into_iter` in variable completions
- Use `Record::values` iterator in `into sqlite`
- Use `Record::iter_mut` for-loop in `default`
- Change `nu_engine::nonexistent_column` to use iterator
- Use `Record::columns` iter in `nu-cmd-base`
- Use `Record::get_index` in `nu-command/network/http`
- Use `Record.insert()` in `merge`
- Refactor `move` to use encapsulated record API
- Use `Record.insert()` in `explore`
- Use proper `Record` API in `explore`
- Remove defensiveness around record in `explore`
- Use encapsulated record API in more `nu-command`s
# User-Facing Changes
None intentional
# Tests + Formatting
(-)
# Description
This change allows the vscode-specific ansi escape sequence of
633;P;Cwd= to be run when nushell detects that it's running inside of
vscode's terminal. Otherwise the standard OSC7 will run. This is helpful
with ctrl+g inside of vscode terminal as well.
closed#10989
/cc @CAD97
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
- Simplify `table` record highlight with `.get_mut`
- pretty straight forward
- Use record iterators in `table` abbreviation logic
- This required some rework if we go from guaranted contiguous arrays to
iterators
- Refactor `nu-table` internals to new record API
# User-Facing Changes
None intened
# Tests + Formatting
(-)
# Description
Rewrite `find` internals with the same principles as in #10927.
Here we can remove an unnecessary lookup accross all columns when not
narrowing find to particular columns
- Change `find` internal fns to use iterators
- Remove unnecessary quadratic lookup in `find`
- Refactor `find` record highlight logic
# User-Facing Changes
Should provide a small speedup when not providing `find --columns`
# Tests + Formatting
(-)
# Description
Changes the `captures` field in `Closure` from a `HashMap` to a `Vec`
and makes `Stack::captures_to_stack` take an owned `Vec` instead of a
borrowed `HashMap`.
This eliminates the conversion to a `Vec` inside `captures_to_stack` and
makes it possible to avoid clones altogether when using an owned
`Closure` (which is the case for most commands). Additionally, using a
`Vec` reduces the size of `Value` by 8 bytes (down to 72).
# User-Facing Changes
Breaking API change for `nu-protocol`.
# Description
This is easy to do with rust-analyzer, but I didn't want to just pump
these all out without feedback.
Part of #10700
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
`split-by` only works on a `Record`, the error type was updated to
match, and now uses a more-specific type. (Two type fixes for the price
of one!)
The `usage` was updated to say "record" as well
# User-Facing Changes
* Providing the wrong type to `split-by` now gives an error messages
with the correct required input type
Previously:
```
❯ ls | get name | split-by type
Error: × unsupported input
╭─[entry #267:1:1]
1 │ ls | get name | split-by type
· ─┬─
· ╰── requires a table with one row for splitting
╰────
```
With this PR:
```
❯ ls | get name | split-by type
Error: nu:🐚:type_mismatch
× Type mismatch.
╭─[entry #1:1:1]
1 │ ls | get name | split-by type
· ─┬─
· ╰── requires a record to split
╰────
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Only generated commands need to be updated
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Limit the test `-p nu-command --test main
commands::run_external::redirect_combine` which uses `sh` to running on
`not(Windows)` like is done for other tests assuming unixy CLI items;
`sh` doesn't exist on Windows.
# User-Facing Changes
None; this is a change to tests only.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
@jntrnr discovered that `items` wasn't properly setting the
`eval_block_with_early_return()` block settings. This change fixes that
which allows `echo` to be redirected and therefore pass data through the
pipeline.
Without `echo`
```nushell
❯ { new: york, san: francisco } | items {|key, value| $'($key) ($value)' }
╭─┬─────────────╮
│0│new york │
│1│san francisco│
╰─┴─────────────╯
```
With `echo`
```nushell
❯ { new: york, san: francisco } | items {|key, value| echo $'($key) ($value)' }
╭─┬─────────────╮
│0│new york │
│1│san francisco│
╰─┴─────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the `items` example so that it doesn't use `echo`.
`echo` now works like print unless it's being redirected, so it doesn't
send values through the pipeline anymore like the example showed.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Just throwing up this PR because color-backtrace seemed to produce more
useful backtraces. Just curious what others think.
Did this:
1. RUST_BACKTRACE=full cargo r
2. ❯ def test01 [] {
let sorted = [storm]
$sorted | range 1.. | zip ($sorted | range ..(-2))
}
3. test01
I like how it shows the code snippet.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
I committed things in my nushell folder that I shouldn't have. oops.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the trash dependency from 3.1.0 to 3.1.2 for better
support on FreeBSD.
closes#10961
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
These tests got orphaned and they would be a good place to test behavior
I want to add for #10867
# User-Facing Changes
None
# Tests + Formatting
Tests were updated to account for removed test infrastructure
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
The `PluginSignature` type supports extra usage but this was not
available in `plugin_name --help`. It also supports search terms but
these did not appear in `help commands`
New behavior show below is the "Extra usage for nu-example-1" line and
the "Search terms:" line
```
❯ nu-example-1 --help
PluginSignature test 1 for plugin. Returns Value::Nothing
Extra usage for nu-example-1
Search terms: example
Usage:
> nu-example-1 {flags} <a> <b> (opt) ...(rest)
Flags:
-h, --help - Display the help message for this command
-f, --flag - a flag for the signature
-n, --named <String> - named string
Parameters:
a <int>: required integer value
b <string>: required string value
opt <int>: Optional number (optional)
...rest <string>: rest value string
Examples:
running example with an int value and string value
> nu-example-1 3 bb
```
Search terms are also available in `help commands`:
```
❯ help commands | where name == "nu-example-1" | select name search_terms
╭──────────────┬──────────────╮
│ name │ search_terms │
├──────────────┼──────────────┤
│ nu-example-1 │ example │
╰──────────────┴──────────────╯
```
# User-Facing Changes
Users can now see plugin extra usage and search terms
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Added "Use `--help` for more information." to the help of
MissingPositional error
- this PR should close
[#10946](https://github.com/nushell/nushell/issues/10946)
**Before:**
**After:**
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Denis Zorya <denis.zorya@trafigura.com>
- Replaced `start`/`end` with span.
- Fixed standard library.
- Add `help` option.
- Add a couple more errors for invalid record types.
Resolve#10914
# Description
# User-Facing Changes
- **BREAKING CHANGE:** `error make` now takes in `span` instead of
`start`/`end`:
```Nushell
error make {
msg: "Message"
label: {
text: "Label text"
span: (metadata $var).span
}
}
```
- `error make` now has a `help` argument for custom error help.
# Description
After talking to @CAD97, I decided to change these unwraps to expects.
See the comments. The bigger question is, how did unwrap pass the CI?
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Replaces the `Vec::remove` in `Record::retain_mut` with some swaps which
should eliminate the `O(n^2)` complexity due to repeated shifting of
elements.
Now the `input list` command, when nothing is selected, will return a
null instead of empty string or an empty list.
Resolves#10909.
# User-Facing Changes
`input list` now returns a `null` when nothing is selected.
# Description
Consequences of #10841
This does not yet make the assumption that columns are always
duplicated. Follow the existing logic here
- Use saner record API in `nu-engine/src/eval.rs`
- Use checked record construction in `nu-engine/src/scope.rs`
- Use `values` iterator in `nu-engine/src/scope.rs`
- Use `columns` iterator in `nu_engine::get_columns()`
- Start using record API in `value/mod.rs`
- Use `.insert` in `eval_const.rs` Record code
- Record API for `eval_const.rs` table code
# User-Facing Changes
None
# Tests + Formatting
None
# Description
Pretty much all operations/commands in Nushell assume that the column
names/keys in a record and thus also in a table (which consists of a
list of records) are unique.
Access through a string-like cell path should refer to a single column
or key/value pair and our output through `table` will only show the last
mention of a repeated column name.
```nu
[[a a]; [1 2]]
╭─#─┬─a─╮
│ 0 │ 2 │
╰───┴───╯
```
While the record parsing already either errors with the
`ShellError::ColumnDefinedTwice` or silently overwrites the first
occurence with the second occurence, the table literal syntax `[[header
columns]; [val1 val2]]` currently still allowed the creation of tables
(and internally records with more than one entry with the same name.
This is not only confusing, but also breaks some assumptions around how
we can efficiently perform operations or in the past lead to outright
bugs (e.g. #8431 fixed by #8446).
This PR proposes to make this an error.
After this change another hole which allowed the construction of records
with non-unique column names will be plugged.
## Parts
- Fix `SE::ColumnDefinedTwice` error code
- Remove previous tests permitting duplicate columns
- Deny duplicate column in table literal eval
- Deny duplicate column in const eval
- Deny duplicate column in `from nuon`
# User-Facing Changes
`[[a a]; [1 2]]` will now return an error:
```
Error: nu:🐚:column_defined_twice
× Record field or table column used twice
╭─[entry #2:1:1]
1 │ [[a a]; [1 2]]
· ┬ ┬
· │ ╰── field redefined here
· ╰── field first defined here
╰────
```
this may under rare circumstances block code from evaluating.
Furthermore this makes some NUON files invalid if they previously
contained tables with repeated column names.
# Tests + Formatting
Added tests for each of the different evaluation paths that materialize
tables.
# Description
This change allows `compact` to also compact things with empty strings,
empty lists, and empty records if the `--empty` switch is used. Let's
add a quality-of-life improvement here to just compact all this mess. If
this is a bad idea, please cite examples demonstrating why.
```
❯ [[name position]; [Francis Lead] [Igor TechLead] [Aya null]] | compact position
╭#┬─name──┬position╮
│0│Francis│Lead │
│1│Igor │TechLead│
╰─┴───────┴────────╯
❯ [[name position]; [Francis Lead] [Igor TechLead] [Aya ""]] | compact position --empty
╭#┬─name──┬position╮
│0│Francis│Lead │
│1│Igor │TechLead│
╰─┴───────┴────────╯
❯ [1, null, 2, "", 3, [], 4, {}, 5] | compact
╭─┬─────────────────╮
│0│ 1│
│1│ 2│
│2│ │
│3│ 3│
│4│[list 0 items] │
│5│ 4│
│6│{record 0 fields}│
│7│ 5│
╰─┴─────────────────╯
❯ [1, null, 2, "", 3, [], 4, {}, 5] | compact --empty
╭─┬─╮
│0│1│
│1│2│
│2│3│
│3│4│
│4│5│
╰─┴─╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Changes `FromValue` to take owned `Value`s instead of borrowed `Value`s.
This eliminates some unnecessary clones (e.g., in `call_ext.rs`).
# User-Facing Changes
Breaking API change for `nu_protocol`.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
If an external completer is used and it returns no completions for a
filepath, we fall back to the builtin path completer.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Path completions will remain consistent with the use of an external
completer.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
- fixes#10766
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
If the partial supplied to the completion function is shorter than the
span, the cursor is in between the path, we are trying to complete an
intermediate directory. In such a case we:
- only suggest directory names
- don't append the slash since it is already present
- only complete the path till the component the cursor is on
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Intermediate directories can be completed without erasing the rest of
the path.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Reuses the existing `Closure` type in `Value::Closure`. This will help
with the span refactoring for `Value`. Additionally, this allows us to
more easily box or unbox the `Closure` case should we chose to do so in
the future.
# User-Facing Changes
Breaking API change for `nu_protocol`.
# Description
These macros simply took a `Span` and a shared reference to `Config` and
returned a Value, for better readability and reasoning about their
behavior convert them to simple function as they don't do anything
relevant with their macro powers.
# User-Facing Changes
None
# Tests + Formatting
(-)
# Description
While we have now a few ways to add items or iterate over the
collection, we don't have a way to cleanly remove items from `Record`.
This PR fixes that:
- Add `Record.remove()` to remove by key
- makes the assumption that keys are unique, so can not be used
universally, yet (see #10875 for an important example)
- Add naive `Record.retain()` for inplace removal
- This follows the two separate `retain`/`retain_mut` in the Rust std
library types, compared to the value-mutating `retain` in `indexmap`
- Add `Record.retain_mut()` for one-pass pruning
Continuation of #10841
# User-Facing Changes
None yet.
# Tests + Formatting
Doctests for the `retain`ing fun
# Description
This PR restores and old functionality that must of been broken with the
input_output_types() updating. It allows commands like this to work
again.
```nushell
open $nu.history-path |
get history.command_line |
split column ' ' cmd |
group-by cmd --to-table |
update items {|u| $u.items | length} |
sort-by items -r |
first 10 |
table -n 1
```
output
```
╭#─┬group─┬items╮
│1 │exit │ 3004│
│2 │ls │ 2591│
│3 │git │ 1678│
│4 │help │ 1549│
│5 │open │ 1374│
│6 │cd │ 1186│
│7 │cargo │ 944│
│8 │let │ 784│
│9 │source│ 755│
│10│z │ 486│
╰#─┴group─┴items╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Previously `group-by` returned a record containing each group as a
column. This data layout is hard to work with for some tasks because you
have to further manipulate the result to do things like determine the
number of items in each group, or the number of groups. `transpose` will
turn the record returned by `group-by` into a table, but this is
expensive when `group-by` is run on a large input.
In a discussion with @fdncred [several
workarounds](https://github.com/nushell/nushell/discussions/10462) to
common tasks were discussed, but they seem unsatisfying in general.
Now when `group-by --to-table` is used a table is returned with the
columns "groups" and "items" making it easier to do things like count
the number of groups (`| length`) or count the number of items in each
group (`| each {|g| $g.items | length`)
# User-Facing Changes
* `group-by` returns a `table` with "group" and "items" columns instead
of a `record` with one column per group name
# Tests + Formatting
Tests for `group-by` were updated
# After Submitting
* No breaking changes were made. The new `--to-table` switch should be
added automatically to the [`group-by`
documentation](https://www.nushell.sh/commands/docs/group-by.html)
# Description
> Our `Record` looks like a map, quacks like a map, so let's treat it
with the API for a map
Implement common methods found on e.g. `std::collections::HashMap` or
the insertion-ordered [indexmap](https://docs.rs/indexmap).
This allows contributors to not have to worry about how to get to the
relevant items and not mess up the assumptions of a Nushell record.
## Record assumptions
- `cols` and `vals` are of equal length
- for all practical purposes, keys/columns should be unique
## End goal
The end goal of the upcoming series of PR's is to allow us to make
`cols` and `vals` private.
Then it would be possible to exchange the backing datastructure to best
fit the expected workload.
This could be statically (by finding the best balance) or dynamically by
using an `enum` of potential representations.
## Parts
- Add validating explicit part constructor
`Record::from_raw_cols_vals()`
- Add `Record.columns()` iterator
- Add `Record.values()` iterator
- Add consuming `Record.into_values()` iterator
- Add `Record.contains()` helper
- Add `Record.insert()` that respects existing keys
- Add key-based `.get()`/`.get_mut()` to `Record`
- Add `Record.get_index()` for index-based access
- Implement `Extend` for `Record` naively
- Use checked constructor in `record!` macro
- Add `Record.index_of()` to get index by key
# User-Facing Changes
None directly
# Developer facing changes
You don't have to roll your own record handling and can use a familiar
API
# Tests + Formatting
No explicit unit tests yet. Wouldn't be too tricky to validate core
properties directly.
Will be exercised by the following PRs using the new
methods/traits/iterators.
# Description
Use `record!` macro instead of defining two separate `vec!` for `cols`
and `vals` when appropriate.
This visually aligns the key with the value.
Further more you don't have to deal with the construction of `Record {
cols, vals }` so we can hide the implementation details in the future.
## State
Not covering all possible commands yet, also some tests/examples are
better expressed by creating cols and vals separately.
# User/Developer-Facing Changes
The examples and tests should read more natural. No relevant functional
change
# Bycatch
Where I noticed it I replaced usage of `Value` constructors with
`Span::test_data()` or `Span::unknown()` to the `Value::test_...`
constructors. This should make things more readable and also simplify
changes to the `Span` system in the future.
# Description
as we can see in the [documentation of
`str.to_lowercase`](https://doc.rust-lang.org/std/primitive.str.html#method.to_lowercase),
not only ASCII symbols have lower and upper variants.
- `str upcase` uses the correct method to convert the string
7ac5a01e2f/crates/nu-command/src/strings/str_/case/upcase.rs (L93)
- `str downcase` incorrectly converts only ASCII characters
7ac5a01e2f/crates/nu-command/src/strings/str_/case/downcase.rs (L124)
this PR uses `str.to_lower_case` instead of `str.to_ascii_lowercase` in
`str downcase`.
# User-Facing Changes
- upcase still works fine
```nushell
~ l> "ὀδυσσεύς" | str upcase
ὈΔΥΣΣΕΎΣ
```
- downcase now works
👉 before
```nushell
~ l> "ὈΔΥΣΣΕΎΣ" | str downcase
ὈΔΥΣΣΕΎΣ
```
👉 after
```nushell
~ l> "ὈΔΥΣΣΕΎΣ" | str downcase
ὀδυσσεύς
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
adds two tests
- `non_ascii_upcase`
- `non_ascii_downcase`
# After Submitting
# Description
looking at the [Wax documentation about
`wax::Walk.not`](https://docs.rs/wax/latest/wax/struct.Walk.html#examples),
especially
> therefore does not read directory trees from the file system when a
directory matches an [exhaustive glob
expression](https://docs.rs/wax/latest/wax/trait.Pattern.html#tymethod.is_exhaustive)
> **Important**
> in the following of this PR description, i talk about *pruning* and a
`--prune` option, but this has been changed to *exclusion* and
`--exclude` after a discussion with @fdncred.
this looks like a *pruning* operation to me, right? 😮
i wanted to make the `glob` option `--not` clearer about that, because
> -n, --not <List(String)> - Patterns to exclude from the results
from `help glob` is not very explicit about whether the search is pruned
when entering a directory matching a pattern in `--not` or just removing
it from the output 😕
## changelog
this PR proposes to rename the `glob --not` option to `glob --prune` and
make it's documentation more explicit 😋
## benchmarking
to support the *pruning* behaviour put forward above, i've run a
benchmark
1. define two closures to compare the behaviour between removing
patterns manually or using `--not`
```nushell
let where = {
[.*/\.local/.*, .*/documents/.*, .*/\.config/.*]
| reduce --fold (glob **) {|pat, acc| $acc | where $it !~ $pat}
| length
}
```
```nushell
let not = { glob ** --not [**/.local/**, **/documents/**, **/.config/**] | length }
```
2. run the two to make sure they give similar results
```nushell
> do $where
33424
```
```nushell
> do $not
33420
```
👌
3. measure the performance
```nushell
use std bench
```
```nushell
> bench --verbose --pretty --rounds 25 $not
44ms 52µs 285ns +/- 977µs 571ns
```
```nushell
> bench --verbose --pretty --rounds 5 $where
1sec 250ms 187µs 99ns +/- 8ms 538µs 57ns
```
👉 we can see that the results are (almost) the same but
`--not` is much faster, looks like pruning 😋
# User-Facing Changes
- `--not` will give a warning message but still work
- `--prune` will work just as `--not` without warning and with a more
explicit doc
- `--prune` and `--not` at the same time will give an error
# Tests + Formatting
this PR fixes the examples of `glob` using the `--not` option.
# After Submitting
prepare the removal PR and mention in release notes.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Implements `whoami` using the `whoami` command from uutils as backend.
This is a draft because it depends on
https://github.com/uutils/coreutils/pull/5310 and a new release of
uutils needs to be made (and the paths in `Cargo.toml` should be
updated). At this point, this is more of a proof of concept 😄
Additionally, this implements a (simple and naive) conversion from the
uutils `UResult` to the nushell `ShellError`, which should help with the
integration of other utils, too. I can split that off into a separate PR
if desired.
I put this command in the "platform" category. If it should go somewhere
else, let me know!
The tests will currently fail, because I've used a local path to uutils.
Once the PR on the uutils side is merged, I'll update it to a git path
so that it can be tested and runs on more machines than just mine.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New `whoami` command. This might break some users who expect the system
`whoami` command. However, the result of this new command should be very
close, just with a nicer help message, at least for Linux users. The
default `whoami` on Windows is quite different from this implementation:
https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/whoami
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
related to
-
https://discord.com/channels/601130461678272522/614593951969574961/1162406310155923626
# Description
this PR
- does a bit of minor refactoring
- makes sure the input paths get expanded
- makes sure the input PATH gets split on ":"
- adds a test
- fixes the other tests
# User-Facing Changes
should give a better overall experience with `std path add`
# Tests + Formatting
adds a new test case to the `path_add` test and fixes the others.
# After Submitting
# Description
just noticed `$env.config.filesize.metric` is not the same in
`default_config.nu` and `config.rs`
# User-Facing Changes
filesizes will show in "binary" mode by default when using the default
config files, i.e. `kib` instead of `kb`.
# Tests + Formatting
# After Submitting
# Description
This PR corrects some help text by stating what the real delimiter is
for the `--include-path` command line parameter which is `char
record_sep` aka `\x1e`. Up to this point, this has really only been used
for the vscode extension to setup the NU_LIB_DIRS env var correctly. We
tried `:` and `;` and neither would work so we had to choose something
that wouldn't be confused so easily.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Currently the following command is broken:
```nushell
echo a o+e> 1.txt
```
It's because we don't redirect output of `echo` command. This pr is
trying to fix it.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes an overlook from a previous PR. It now correctly returns
the details on lazy records.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Describe detailed now returns the expected result.
# Description
- this PR should close#10819
# User-Facing Changes
Behaviour is similar to pre 0.86.0 behaviour of the cp command and
should as such not have a user-facing change, only compared to the
current version, were the option is readded.
# After Submitting
I guess the documentation will be automatically updated and as this
feature is no further highlighted, probably, no more work will be needed
here.
# Considerations
coreutils actually allows a third option:
```
pub enum UpdateMode {
// --update=`all`,
ReplaceAll,
// --update=`none`
ReplaceNone,
// --update=`older`
// -u
ReplaceIfOlder,
}
```
namely `ReplaceNone`, which I have not added. Also I think that
specifying `--update 'abc'` is non functional.
# Description
Fixes: #10830
The issue happened during lite-parsing, when we want to put a
`LiteElement` to a `LitePipeline`, we do nothing if relative redirection
target is empty.
So the command `echo aaa o> | ignore` will be interpreted to `echo aaa |
ignore`.
This pr is going to check and return an error if redirection target is
empty.
# User-Facing Changes
## Before
```
❯ echo aaa o> | ignore # nothing happened
```
## After
```nushell
❯ echo aaa o> | ignore
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #1:1:1]
1 │ echo aaa o> | ignore
· ─┬
· ╰── expected redirection target
╰────
```
# Description
Support pattern matching against the `null` literal. Fixes#10799
### Before
```nushell
> match null { null => "success", _ => "failure" }
failure
```
### After
```nushell
> match null { null => "success", _ => "failure" }
success
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users can pattern match against a `null` literal.
# Description
`from tsv` and `from csv` both support a `--flexible` flag. This flag
can be used to "allow the number of fields in records to be variable".
Previously, a record's invariant that `rec.cols.len() == rec.vals.len()`
could be broken during parsing. This can cause runtime errors as in
#10693. Other commands, like `select` were also affected.
The inconsistencies are somewhat hard to see, as most nushell code
assumes an equal number of columns and values.
# Before
### Fewer values than columns
```nushell
> let record = (echo "one,two\n1" | from csv --flexible | first)
# There are two columns
> $record | columns | to nuon
[one, two]
# But only one value
> $record | values | to nuon
[1]
# And printing the record doesn't show the second column!
> $record | to nuon
{one: 1}
```
### More values than columns
```nushell
> let record = (echo "one,two\n1,2,3" | from csv --flexible | first)
# There are two columns
> $record | columns | to nuon
[one, two]
# But three values
> $record | values | to nuon
[1, 2, 3]
# And printing the record doesn't show the third value!
> $record | to nuon
{one: 1, two: 2}
```
# After
### Fewer values than columns
```nushell
> let record = (echo "one,two\n1" | from csv --flexible | first)
# There are two columns
> $record | columns | to nuon
[one, two]
# And a matching number of values
> $record | values | to nuon
[1, null]
# And printing the record works as expected
> $record | to nuon
{one: 1, two: null}
```
### More values than columns
```nushell
> let record = (echo "one,two\n1,2,3" | from csv --flexible | first)
# There are two columns
> $record | columns | to nuon
[one, two]
# And a matching number of values
> $record | values | to nuon
[1, 2]
# And printing the record works as expected
> $record | to nuon
{one: 1, two: 2}
```
# User-Facing Changes
Using the `--flexible` flag with `from csv` and `from tsv` will not
result in corrupted record state.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is just a fixup PR. There was a describe PR that passed CI but then
later didn't pass main. This PR fixes that issue.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- Add `detailed` flag for `describe`
- Improve detailed describe and better format when running examples.
# Rationale
For now, neither `describe` nor any of the `debug` commands provide an
easy and structured way of inspecting the data's type and more. This
flag provides a structured way of getting such information. Allows also
to avoid the rather hacky solution
```nu
$in | describe | str replace --regex '<.*' ''
```
# User-facing changes
Adds a new flag to ``describe`.
Reverts nushell/nushell#10812
This goes back to a version of `regex` and its dependencies that is
shared with a lot of our other dependencies. Before this we did not
duplicate big dependencies of `regex` that affect binary size and
compile time.
As there is no known bug or security problem we suffer from, we can wait
on receiving the performance improvements to `regex` with the rest of
our `regex` dependents.
r? @fdncred
Last one, I hope. At least short of completely redesigning `registry
query`'s interface. (Which I wouldn't implement without asking around
first.)
# Description
User-Facing Changes has the general overview. Inline comments provide a
lot of justification on specific choices. Most of the type conversions
should be reasonably noncontroversial, but expanding `REG_EXPAND_SZ`
needs some justification. First, an example of the behavior there:
```shell
> # release nushell:
> version | select version commit_hash | to md --pretty
| version | commit_hash |
| ------- | ---------------------------------------- |
| 0.85.0 | a6f62e05ae |
> registry query --hkcu Environment TEMP | get value
%USERPROFILE%\AppData\Local\Temp
> # with this patch:
> version | select version commit_hash | to md --pretty
| version | commit_hash |
| ------- | ---------------------------------------- |
| 0.86.1 | 0c5a4c991f |
> registry query --hkcu Environment TEMP | get value
C:\Users\CAD\AppData\Local\Temp
> # Microsoft CLI tooling behavior:
> ^pwsh -c `(Get-ItemProperty HKCU:\Environment).TEMP`
C:\Users\CAD\AppData\Local\Temp
> ^reg query HKCU\Environment /v TEMP
HKEY_CURRENT_USER\Environment
TEMP REG_EXPAND_SZ %USERPROFILE%\AppData\Local\Temp
```
As noted in the inline comments, I'm arguing that it makes more sense to
eagerly expand the %EnvironmentString% placeholders, as none of
Nushell's path functionality will interpret these placeholders. This
makes the behavior of `registry query` match the behavior of pwsh's
`Get-ItemProperty` registry access, and means that paths (the most
common use of `REG_EXPAND_SZ`) are actually usable.
This does *not* break nu_script's
[`update-path`](https://github.com/nushell/nu_scripts/blob/main/sourced/update-path.nu);
it will just be slightly inefficient as it will not find any
`%Placeholder%`s to manually expand anymore. But also, note that
`update-path` is currently *wrong*, as a path including
`%LocalAppData%Low` is perfectly valid and sometimes used (to go to
`Appdata\LocalLow`); expansion isn't done solely on a path segment
basis, as is implemented by `update-path`.
I believe that the type conversions implemented by this patch are
essentially always desired. But if we want to keep `registry query`
"pure", we could easily introduce a `registry get`[^get] which does the
more complete interpretation of registry types, and leave `registry
query` alone as doing the bare minimum. Or we could teach `path expand`
to do `ExpandEnvironmentStringsW`. But REG_EXPAND_SZ being the odd one
out of not getting its registry type semantics decoded by `registry
query` seems wrong.
[^get]: This is the potential redesign I alluded to at the top. One
potential change could be to make `registry get Environment` produce
`record<Path: string, TEMP: string, TMP: string>` instead of `registry
query`'s `table<name: string, value: string, type: string>`, the idea
being to make it feel as native as possible. We could even translate
between Nu's cell-path and registry paths -- cell paths with spaces do
actually work, if a bit awkwardly -- or even introduce lazy records so
the registry can be traversed with normal data manipulation ... but that
all seems a bit much.
# User-Facing Changes
- `registry query`'s produced `value` has changed. Specifically:
- ❗ Rows `where type == REG_EXPAND_SZ` now expand `%EnvironmentVarable%`
placeholders for you. For example, `registry query --hkcu Environment
TEMP | get value` returns `C:\Users\CAD\AppData\Local\Temp` instead of
`%USERPROFILE%\AppData\Local\Temp`.
- You can restore the old behavior and preserve the placeholders by
passing a new `--no-expand` switch.
- Rows `where type == REG_MULTI_SZ` now provide a `list<string>` value.
They previously had that same list, but `| str join "\n"`.
- Rows `where type == REG_DWORD_BIG_ENDIAN` now provide the correct
numeric value instead of a byte-swapped value.
- Rows `where type == REG_QWORD` now provide the correct numeric
value[^sign] instead of the value modulo 2<sup>32</sup>.
- Rows `where type == REG_LINK` now provide a string value of the link
target registry path instead of an internal debug string representation.
(This should never be visible, as links should be transparently
followed.)
- Rows `where type =~ RESOURCE` now provide a binary value instead of an
internal debug string representation.
[^sign]: Nu's `int` is a signed 64-bit integer. As such, values >=
2<sup>63</sup> will be reported as their negative two's compliment
value. This might sometimes be the correct interpretation -- the
registry does not distinguish between signed and unsigned integer values
-- but regedit and pwsh display all values as unsigned.
# Description
Remove the `clean_string` hack used in `registry query`.
This was a workaround for a [bug][gentoo90/winreg-rs#52] in winreg which
has since [been fixed][edf9eef] and released in [winreg v0.12.0].
winreg now properly displays strings in RegKey's Display impl instead of
outputting their debug representation. We remove our `clean_string` such
that registry entries which happen to start/end with `"` or contain `\\`
won't get mangled. This is very important for entries in UNC path format
as those begin with a double backslash.
[gentoo90/winreg-rs#52]:
<https://github.com/gentoo90/winreg-rs/issues/52>
[edf9eef]:
<edf9eef38f>
[winreg v0.12.0]:
<https://github.com/gentoo90/winreg-rs/releases/tag/v0.12.0>
# User-Facing Changes
- `registry query` used to accidentally mangle values that contain a
literal `\\`, such as UNC paths. It no longer does so.
# Tests + Formatting
- [X] `toolkit check pr`
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Rename `str size` to `str stats`, for more detail see:
https://github.com/nushell/nushell/pull/10772
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Move `ansi link` from extra to default feature, close#10792
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
when i try out a PR, i always end up running `cargo run` but then i
never know if i'm inside my install of Nushell or a PR 👀
in this PR i propose to add a `run` command to the `toolkit.nu` which
- runs the current revision inside `cargo run`
- adds a clear right prompt to make sure one knows they are in `cargo
run`
# User-Facing Changes
an example after running `toolkit run`
# Tests + Formatting
# After Submitting
This reflects how we currently distributed our efforts to supporting the
different platforms and clarifies which things get run by the Nushell
team and which rely on the help of third-parties or individual
contributors.
Feel free to propose improvements, as long as they can be backed up by
implemented practice as a result.
related to
-
https://discord.com/channels/601130461678272522/614613939334152217/1164530991931605062
# Description
it appears `size` is a command that operates on `string`s only and gives
the user information about the chars, graphemes and bytes of a string.
this looks like a command that should be a subcommand to `str` 😏
this PR
- adds `str size`
- deprecates `size`
`size` is planned to be removed in 0.88
# User-Facing Changes
`str size` can be used for the same result as `size`.
# Tests + Formatting
# After Submitting
write a removal PR for `size`
This commit uses the new `CwdAwareHinter` in reedline. Closes#8883.
# Description
Currently, the history based hints show results from all directories,
while most commands make sense only in the directory they were run in.
This PR makes hints take the current directory into account.
# User-Facing Changes
Described above.
I haven't yet added a config option for this, because I personally
believe folks won't be against it once they try it out. We can add it if
people complain, there's some time before the next release.
Fish has this without a config option too.
# Tests + Formatting
If tests are needed, I'll need help as I'm not well versed with the
codebase.
related to
- https://github.com/nushell/nushell/pull/10770
# Description
because some people look into `unfold` already (myself included lol) and
there will be 4 weeks with that new command which has a decent section
in the release note, i fear that
https://github.com/nushell/nushell/pull/10770 is a bit too brutal,
removing `unfold` without any warning...
this PR brings `unfold` back to life.
the `unfold` command will have a deprecation warning and will be removed
in 0.88.
# User-Facing Changes
`unfold` is only deprecated, not removed.
# Tests + Formatting
# After Submitting
related to
- https://github.com/nushell/nushell/pull/10520
# Description
this PR is a followup to https://github.com/nushell/nushell/pull/10520
and removes the `random integer` command completely, in favor of `random
int`.
# User-Facing Changes
`random integer` has been fully moved to `random int`
```nushell
> random integer 0..1
Error: nu::parser::extra_positional
× Extra positional argument.
╭─[entry #1:1:1]
1 │ random integer 0..1
· ───┬───
· ╰── extra positional argument
╰────
help: Usage: random
```
# Tests + Formatting
tests have been moved from
`crates/nu-command/tests/commands/random/integer.rs` to
`crates/nu-command/tests/commands/random/int.rs`
# After Submitting
mention in 0.87.0 release notes
related to
- https://github.com/nushell/nushell/pull/10478
# Description
this PR is the followup removal to
https://github.com/nushell/nushell/pull/10478.
# User-Facing Changes
`$nothing` is now an undefined variable, unless define by the user.
```nushell
> $nothing
Error: nu::parser::variable_not_found
× Variable not found.
╭─[entry #1:1:1]
1 │ $nothing
· ────┬───
· ╰── variable not found.
╰────
```
# Tests + Formatting
# After Submitting
mention that in release notes
# Description
This PR renames the `unfold` command to `generate`.
closes#10760
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Since the `else` clause for the nested branches check for the first
unmatched argument, this PR brings together all the conditions where the
positional argument shape is numeric using the `matches!` keyword. This
also allows us to and (`&&`) the condition with when no short flags are
found unlike the `if let ...` statements. Finally, we can handle any
`unmatched_short_flags` at one place.
# User-Facing Changes
No user facing changes.
# Description
This PR adds the ability to use modulo with durations:
```nu
(2min + 31sec) mod 20sec # 11sec
```
# User-Facing Changes
Allows to use `<duration> mod <duration>`
# Description
Changed `group-by` behavior to accept empty list as input and return an
empty record instead of throwing an error. I also replaced
`errors_if_input_empty()` test to reflect the new expected behavior.
See #10713
# User-Facing Changes
`[] | group-by` or `[] | group-by a` now returns empty record
# Tests + Formatting
1 test for emptied table i.e. list
---------
Signed-off-by: Oscar <71343264+0scvr@users.noreply.github.com>
follow-up to
- https://github.com/nushell/nushell/pull/10566
# Description
this PR deprecates the use of `def-env` and `export def-env`
these two core commands will be removed in 0.88
# User-Facing Changes
using `def-env` will give a warning
```nushell
> def-env foo [] { print "foo" }; foo
Error: × Deprecated command
╭─[entry #1:1:1]
1 │ def-env foo [] { print "foo" }; foo
· ───┬───
· ╰── `def-env` is deprecated and will be removed in 0.88.
╰────
help: Use `def --env` instead
foo
```
# Tests + Formatting
# After Submitting
follow-up to
- https://github.com/nushell/nushell/pull/10566
# Description
this PR deprecates the use of `extern-wrapped` and `export
extern-wrapped`
these two core commands will be removed in 0.88
# User-Facing Changes
using `extern-wrapped` will give a warning
```nushell
> extern-wrapped foo [...args] { print "foo" }; foo
Error: × Deprecated command
╭─[entry #2:1:1]
1 │ extern-wrapped foo [...args] { print "foo" }; foo
· ───────┬──────
· ╰── `extern-wrapped` is deprecated and will be removed in 0.88.
╰────
help: Use `def --wrapped` instead
foo
```
# Tests + Formatting
# After Submitting
Add `--ignore-errors` flag to reject.
This is a PR in reference to #10215 as select has the flag, but reject
hasn't
user can now add `-i` or `--ignore-errors` flag to turn every cell path
into option.
```nushell
> let arg = [0 5 a c]
> [[a b];[1 2] [3 4] [5 6]] | reject $a | to nuon
error index to large
# ----
> let arg = [0 5 a c]
> [[a b];[1 2] [3 4] [5 6]] | reject $a -i | to nuon
[[a, b]; [1, 2], [3, 4], [5, 6]]
```
When looking into `lite_parse` function, I found that it contains some
duplicate code, and they can be expressed as an action called
`push_command_to(pipeline)`.
And I believe it will make our life easier to support something like
`o>> a.txt`, `e>> a.txt`.
In the final match of `lex_item`, we'll return `Err(ParseError)` in rare
case, normally we'll return None.
So I think making error part mutable can reduce some code, and it's
better if we want to add more lex items.
# Description
just caught a last mention to `let-env` in the `CONTRIBUTING.md`
document 😋
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
This PR updates the release-pkg.nu script with updated instructions for
performing the release manually. These are there specifically because
winget fails so often and creating a x86_64 windows msi is not trivial.
There are also a couple minor changes to the script's syntax.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Files that begin with dashes can be ambiguous when passed to commands
like `ls`. For example if there exists a file `--help`, it might be
considered a flag if not properly escaped. This PR escapes any file that
begins with a dash.
# User-Facing Changes
Files beginning with dashes will be escaped.
# Tests + Formatting
Tests are added.
(squashed version of #10557, clean commit history and review thread)
Fixes#10571, also potentially: #10364, #10211, #9558, #9310,
# Description
Changes processing of arguments to filesystem commands that are source
paths or globs.
Applies to `cp, cp-old, mv, rm, du` but not `ls` (because it uses a
different globbing interface) or `glob` (because it uses a different
globbing library).
The core of the change is to lookup the argument first as a file and
only glob if it is not. That way,
a path containing glob metacharacters can be referenced without glob
quoting, though it will have to be single quoted to avoid nushell
parsing.
Before: A file path that looks like a glob is not matched by the glob
specified as a (source) argument and takes some thinking about to
access. You might say the glob pattern shadows a file with the same
spelling.
```
> ls a*
╭───┬────────┬──────┬──────┬────────────────╮
│ # │ name │ type │ size │ modified │
├───┼────────┼──────┼──────┼────────────────┤
│ 0 │ a[bc]d │ file │ 0 B │ 34 seconds ago │
│ 1 │ abd │ file │ 0 B │ now │
│ 2 │ acd │ file │ 0 B │ now │
╰───┴────────┴──────┴──────┴────────────────╯
> cp --verbose 'a[bc]d' dest
copied /home/bobhy/src/rust/work/r4/abd to /home/bobhy/src/rust/work/r4/dest/abd
copied /home/bobhy/src/rust/work/r4/acd to /home/bobhy/src/rust/work/r4/dest/acd
> ## Note -- a[bc]d *not* copied, and seemingly hard to access.
> cp --verbose 'a\[bc\]d' dest
Error: × No matches found
╭─[entry #33:1:1]
1 │ cp --verbose 'a\[bc\]d' dest
· ─────┬────
· ╰── no matches found
╰────
> #.. but is accessible with enough glob quoting.
> cp --verbose 'a[[]bc[]]d' dest
copied /home/bobhy/src/rust/work/r4/a[bc]d to /home/bobhy/src/rust/work/r4/dest/a[bc]d
```
Before_2: if file has glob metachars but isn't a valid pattern, user
gets a confusing error:
```
> touch 'a[b'
> cp 'a[b' dest
Error: × Pattern syntax error near position 30: invalid range pattern
╭─[entry #13:1:1]
1 │ cp 'a[b' dest
· ──┬──
· ╰── invalid pattern
╰────
```
After: Args to cp, mv, etc. are tried first as literal files, and only
as globs if not found to be files.
```
> cp --verbose 'a[bc]d' dest
copied /home/bobhy/src/rust/work/r4/a[bc]d to /home/bobhy/src/rust/work/r4/dest/a[bc]d
> cp --verbose '[a][bc]d' dest
copied /home/bobhy/src/rust/work/r4/abd to /home/bobhy/src/rust/work/r4/dest/abd
copied /home/bobhy/src/rust/work/r4/acd to /home/bobhy/src/rust/work/r4/dest/acd
```
After_2: file with glob metachars but invalid pattern just works.
(though Windows does not allow file name to contain `*`.).
```
> cp --verbose 'a[b' dest
copied /home/bobhy/src/rust/work/r4/a[b to /home/bobhy/src/rust/work/r4/dest/a[b
```
So, with this fix, a file shadows a glob pattern with the same spelling.
If you have such a file and really want to use the glob pattern, you
will have to glob quote some of the characters in the pattern. I think
that's less confusing to the user: if ls shows a file with a weird name,
s/he'll still be able to copy, rename or delete it.
# User-Facing Changes
Could break some existing scripts. If user happened to have a file with
a globbish name but was using a glob pattern with the same spelling, the
new version will process the file and not expand the glob.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix winget release submission error, more details could be found here:
https://github.com/nushell/nushell/pull/5812#issuecomment-1768294811
@fdncred @wolimst
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
2023-10-18 13:00:19 -05:00
1368 changed files with 102119 additions and 42635 deletions
@ -10,11 +10,16 @@ Welcome to Nushell and thank you for considering contributing!
- [Useful commands](#useful-commands)
- [Debugging tips](#debugging-tips)
- [Git etiquette](#git-etiquette)
- [Our Rust style](#our-rust-style)
- [Generally discouraged](#generally-discouraged)
- [Things we want to get better at](#things-we-want-to-get-better-at)
- [License](#license)
## Other helpful resources
More resources can be found in the nascent [developer documentation](devdocs/README.md) in this repo.
- [Developer FAQ](devdocs/FAQ.md)
- [Platform support policy](devdocs/PLATFORM_SUPPORT.md)
- [Our Rust style](devdocs/rust_style.md)
## Proposing design changes
First of all, before diving into the code, if you want to create a new feature, change something significantly, and especially if the change is user-facing, it is a good practice to first get an approval from the core team before starting to work on it.
@ -63,74 +68,74 @@ Read cargo's documentation for more details: https://doc.rust-lang.org/cargo/ref
cargo test --package nu-cli --test main -- commands::<command_name_here>
```
- Check to see if there are code formatting issues
```shell
```nushell
cargo fmt --all -- --check
```
or via the `toolkit.nu` command:
```shell
```nushell
use toolkit.nu fmt
fmt --check
```
- Format the code in the project
```shell
```nushell
cargo fmt --all
```
or via the `toolkit.nu` command:
```shell
```nushell
use toolkit.nu fmt
fmt
```
- Set up `git` hooks to check formatting and run `clippy` before committing and pushing:
```shell
```nushell
use toolkit.nu setup-git-hooks
setup-git-hooks
```
@ -140,12 +145,12 @@ Read cargo's documentation for more details: https://doc.rust-lang.org/cargo/ref
- To view verbose logs when developing, enable the `trace` log level.
```shell
```nushell
cargo run --release -- --log-level trace
```
- To redirect trace logs to a file, enable the `--log-target file` switch.
```shell
```nushell
cargo run --release -- --log-level trace --log-target file
open $"($nu.temp-path)/nu-($nu.pid).log"
```
@ -237,51 +242,6 @@ You can help us to make the review process a smooth experience:
- Feel free to notify your reviewers or affected PR authors if your change might cause larger conflicts with another change.
- During the rollup of multiple PRs, we may choose to resolve merge conflicts and CI failures ourselves. (Allow maintainers to push to your branch to enable us to do this quickly.)
## Our Rust style
To make the collaboration on a project the scale of Nushell easy, we want to work towards a style of Rust code that can easily be understood by all of our contributors. We conservatively rely on most of [`clippy`s suggestions](https://github.com/rust-lang/rust-clippy) to get to the holy grail of "idiomatic" code. Good code in our eyes is not the most clever use of all available language features or with the most unique personal touch but readable and strikes a balance between being concise, and also unsurprising and explicit in the places where it matters.
One example of this philosophy is that we generally avoid to fight the borrow-checker in our data model but rather try to get to a correct and simple solution first and then figure out where we should reuse data to achieve the necessary performance. As we are still pre-1.0 this served us well to be able to quickly refactor or change larger parts of the code base.
### Generally discouraged
#### `+nightly` language features or things only available in the most recent `+stable`
To make life for the people easier that maintain the Nushell packages in various distributions with their own release cycle of `rustc` we typically rely on slightly older Rust versions. We do not make explicit guarantees how far back in the past we live but you can find out in our [`rust-toolchain.toml`](https://github.com/nushell/nushell/blob/main/rust-toolchain.toml)
(As a rule of thumb this has been typically been approximately 2 releases behind the newest stable compiler.)
The use of nightly features is prohibited.
#### Panicking
As Nushell aims to provide a reliable foundational way for folks to interact with their computer, we cannot carelessly crash the execution of their work by panicking Nushell.
Thus panicking is not an allowed error handling strategy for anything that could be triggered by user input OR behavior of the outside system. If Nushell panics this is a bug or we are against all odds already in an unrecoverable state (The system stopped cooperating, we went out of memory). The use of `.unwrap()` is thus outright banned and any uses of `.expect()` or related panicking macros like `unreachable!` should include a helpful description which assumptions have been violated.
#### `unsafe` code
For any use of `unsafe` code we need to require even higher standards and additional review. If you add or alter `unsafe` blocks you have to be familiar with the promises you need to uphold as found in the [Rustonomicon](https://doc.rust-lang.org/nomicon/intro.html). All `unsafe` uses should include `// SAFETY:` comments explaining how the invariants are upheld and thus alerting you what to watch out for when making a change.
##### FFI with system calls and the outside world
As a shell Nushell needs to interact with system APIs in several places, for which FFI code with unsafe blocks may be necessary. In some cases this can be handled by safe API wrapper crates but in some cases we may choose to directly do those calls.
If you do so you need to document the system behavior on top of the Rust memory model guarantees that you uphold. This means documenting whether using a particular system call is safe to use in a particular context and all failure cases are properly recovered.
##### Implementing self-contained data structures
Another motivation for reaching to `unsafe` code might be to try to implement a particular data structure that is not expressible on safe `std` library APIs. Doing so in the Nushell code base would have to clear a high bar for need based on profiling results. Also you should first do a survey of the [crate ecosystem](https://crates.io) that there doesn't exist a usable well vetted crate that already provides safe APIs to the desired datastructure.
##### Make things go faster by removing checks
This is probably a bad idea if you feel tempted to do so. Don't
#### Macros
Another advanced feature people feel tempted to use to work around perceived limitations of Rusts syntax and we are not particularly fans of are custom macros.
They have clear downsides not only in terms of readability if they locally introduce a different syntax. Most tooling apart from the compiler will struggle more with them. This limits for example consistent automatic formatting or automated refactors with `rust-analyzer`.
That you can fluently read `macro_rules!` is less likely than regular code. This can lead people to introduce funky behavior when using a macro. Be it because a macro is not following proper hygiene rules or because it introduces excessive work at compile time.
So we generally discourage the addition of macros. In a lot of cases your macro may start do something that can be expressed with functions or generics in a much more reusable fashion.
The only exceptions we may allow need to demonstrate that the macro can fix something that is otherwise extremely unreadable, error-prone, or consistently worse at compile time.
### Things we want to get better at
These are things we did pretty liberally to get Nushell off the ground, that make things harder for a high quality stable product. You may run across them but shouldn't take them as an endorsed example.
#### Liberal use of third-party dependencies
The amazing variety of crates on [crates.io](https://crates.io) allowed us to quickly get Nushell into a feature rich state but it left us with a bunch of baggage to clean up.
Each dependency introduces a compile time cost and duplicated code can add to the overall binary size. Also vetting more for correct and secure implementations takes unreasonably more time as this is also a continuous process of reacting to updates or potential vulnerabilities.
Thus we only want to accept dependencies that are essential and well tested implementations of a particular requirement of Nushells codebase.
Also as a project for the move to 1.0 we will try to unify among a set of dependencies if they possibly implement similar things in an area. We don't need three different crates with potentially perfect fit for three problems but rather one reliable crate with a maximized overlap between what it provides and what we need.
We will favor crates that are well tested and used and promise to be more stable and still frequently maintained.
#### Deeply nested code
As Nushell uses a lot of enums in its internal data representation there are a lot of `match` expressions. Combined with the need to handle a lot of edge cases and be defensive about any errors this has led to some absolutely hard to read deeply nested code (e.g. in the parser but also in the implementation of several commands).
This can be observed both as a "rightward drift" where the main part of the code is found after many levels of indentations or by long function bodies with several layers of branching with seemingly repeated branching inside the higher branch level.
This can also be exacerbated by "quick" bugfixes/enhancements that may just try to add a special case to catch a previously unexpected condition. The likelihood of introducing a bug in a sea of code duplication is high.
To combat this, consider using the early-`return` pattern to reject invalid data early in one place instead of building a tree through Rust's expression constructs with a lot of duplicated paths. Unpacking data into a type that expresses that the necessary things already have been checked and using functions to properly deal with separate and common behavior can also help.
## License
We use the [MIT License](https://github.com/nushell/nushell/blob/main/LICENSE) in all of our Nushell projects. If you are including or referencing a crate that uses the [GPL License](https://www.gnu.org/licenses/gpl-3.0.en.html#license-text) unfortunately we will not be able to accept your PR.
For details about which platforms the Nushell team actively supports, see [our platform support policy](devdocs/PLATFORM_SUPPORT.md).
## Configuration
@ -198,7 +199,7 @@ topics that have been presented.
Nu adheres closely to a set of goals that make up its design philosophy. As features are added, they are checked against these goals.
- First and foremost, Nu is cross-platform. Commands and techniques should work across platforms and Nu has first-class support for Windows, macOS, and Linux.
- First and foremost, Nu is cross-platform. Commands and techniques should work across platforms and Nu has [first-class support for Windows, macOS, and Linux](devdocs/PLATFORM_SUPPORT.md).
- Nu ensures compatibility with existing platform-specific executables.
@ -227,7 +228,7 @@ Please submit an issue or PR to be added to this list.
See [Contributing](CONTRIBUTING.md) for details. Thanks to all the people who already contributed!
("datetime<time_unit: (ms, us, ns) timezone (optional)>","Time Unit can be: milliseconds: ms, microseconds: us, nanoseconds: ns. Timezone wildcard is *. Other Timezone examples: UTC, America/Los_Angeles."),
("duration<time_unit: (ms, us, ns)>","Time Unit can be: milliseconds: ms, microseconds: us, nanoseconds: ns."),
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
